[Debburn-changes] r294 - mods-archive/removed-docs
nonameyet/trunk/doc/READMEs/plattforms
Eduard Bloch
blade at costa.debian.org
Tue Sep 12 08:54:03 UTC 2006
Author: blade
Date: 2006-09-12 08:54:03 +0000 (Tue, 12 Sep 2006)
New Revision: 294
Added:
mods-archive/removed-docs/README.vms
Removed:
nonameyet/trunk/doc/READMEs/plattforms/README.vms
Log:
Moving svn+alioth://svn.debian.org/svn/debburn/nonameyet/trunk/doc/READMEs/plattforms/README.vms to removed-docs, not supported yet
Copied: mods-archive/removed-docs/README.vms (from rev 293, nonameyet/trunk/doc/READMEs/plattforms/README.vms)
===================================================================
--- mods-archive/removed-docs/README.vms (rev 0)
+++ mods-archive/removed-docs/README.vms 2006-09-12 08:54:03 UTC (rev 294)
@@ -0,0 +1,140 @@
+This README was written by Dr. Eberhard Heuser-Hofmann
+ vaxinf at chclu.chemie.uni-konstanz.de
+
+If you are looking for a *.zip file instead of the tar archive,
+check this address:
+
+ftp://v36.chemie.uni-konstanz.de/cdrecord_vms/
+
+/*--------------------------------------------------------------------------*/
+Hi,
+
+this is the OpenVMS Version of J.Schilling's cdrecord-program.
+
+There is a command-procedure called build_all.com in the [.cdrecord] subdir,
+that compiles and links the code. The cdrecord-program is been produced in
+[.cdrecord.vms] subdirectory.
+
+Define this program as a symbol via
+
+$ cdrecord:==$disk:[dir]cdrecord.exe
+
+$ cdrecord -help gives an idea about the options, that are possible:
+
+cdrecord -help
+Usage: cdrecord.exe [options] track1...trackn
+Options:
+ -version print version information and exit
+ dev=target SCSI target to use as CD/DVD-Recorder
+ gracetime=# set the grace time before starting to write to #.
+ timeout=# set the default SCSI command timeout to #.
+ debug=#,-d Set to # or increment misc debug level
+ kdebug=#,kd=# do Kernel debugging
+ -verbose,-v increment general verbose level by one
+ -Verbose,-V increment SCSI command transport verbose level by one
+ -silent,-s do not print status of failed SCSI commands
+ driver=name user supplied driver name, use with extreme care
+ driveropts=opt a comma separated list of driver specific options
+ -checkdrive check if a driver for the drive is present
+ -prcap print drive capabilities for MMC compliant drives
+ -inq do an inquiry for the drive and exit
+ -scanbus scan the SCSI bus and exit
+ -reset reset the SCSI bus with the cdrecorder (if possible)
+ -overburn allow to write more than the official size of a medium
+ -ignsize ignore the known size of a medium (may cause problems)
+ -useinfo use *.inf files to overwrite audio options.
+ speed=# set speed of drive
+ blank=type blank a CD-RW disc (see blank=help)
+ -load load the disk and exit (works only with tray loader)
+ -eject eject the disk after doing the work
+ -dummy do everything with laser turned off
+ -msinfo retrieve multi-session info for mkisofs >= 1.10
+ -toc retrieve and print TOC/PMA data
+ -atip retrieve and print ATIP data
+ -multi generate a TOC that allows multi session
+ In this case default track type is CD-ROM XA2
+ -fix fixate a corrupt or unfixated disk (generate a TOC)
+ -nofix do not fixate disk after writing tracks
+ -waiti wait until input is available before opening SCSI
+ -immed Try to use the SCSI IMMED flag with certain long lasting commands
+ -force force to continue on some errors to allow blanking bad disks
+ -dao Write disk in SAO mode. This option will be replaced in the future.
+ -raw Write disk in RAW mode. This option will be replaced in the future.
+ -raw96r Write disk in RAW/RAW96R mode. This option will be replaced in the future.
+ -raw96p Write disk in RAW/RAW96P mode. This option will be replaced in the future.
+ -raw16 Write disk in RAW/RAW16 mode. This option will be replaced in the future.
+ tsize=# Length of valid data in next track
+ padsize=# Amount of padding for next track
+ pregap=# Amount of pre-gap sectors before next track
+ defpregap=# Amount of pre-gap sectors for all but track #1
+ mcn=text Set the media catalog number for this CD to 'text'
+ isrc=text Set the ISRC number for the next track to 'text'
+ index=list Set the index list for the next track to 'list'
+ -text Write CD-Text from information from *.inf files
+ textfile=name Set the file with CD-Text data to 'name'
+ -audio Subsequent tracks are CD-DA audio tracks
+ -data Subsequent tracks are CD-ROM data mode 1 (default)
+ -mode2 Subsequent tracks are CD-ROM data mode 2
+ -xa1 Subsequent tracks are CD-ROM XA mode 1
+ -xa2 Subsequent tracks are CD-ROM XA mode 2
+ -cdi Subsequent tracks are CDI tracks
+ -isosize Use iso9660 file system size for next data track
+ -preemp Audio tracks are mastered with 50/15 µs preemphasis
+ -nopreemp Audio tracks are mastered with no preemphasis (default)
+ -copy Audio tracks have unlimited copy permission
+ -nocopy Audio tracks may only be copied once for personal use (default)
+ -scms Audio tracks will not have any copy permission at all
+ -pad Pad data tracks with 15 zeroed sectors
+ Pad audio tracks to a multiple of 2352 bytes
+ -nopad Do not pad data tracks (default)
+ -shorttrack Subsequent tracks may be non Red Book < 4 seconds if in SAO or RAW mode
+ -noshorttrack Subsequent tracks must be >= 4 seconds
+ -swab Audio data source is byte-swapped (little-endian/Intel)
+The type of the first track is used for the toc type.
+Currently only form 1 tracks are supported.
+
+One important point is how the CDR-device is being selected:
+
+dev=i,j,k
+
+where:
+i: 0 1 2 3 4 5 6 7 8 9 ... 32 33
+ dka dkb dkc dkd gka gkb gkc gkd dqa dqb ... dqy dqz
+
+j: scsi-id
+k: sub-lun (usually 0)
+
+As an example:
+
+dev=1,5,2 selects dkb502:
+
+An typical example how to put virtual disk data onto a cd-rom is given here:
+
+$ cdrecord -speed 2 dev=0,4,0 dka200:[000000]vda0.dsk
+
+Additional hints:
+
+1. Due to timeout problems use -immed switch for IDE-burners under OpenVMS 7.3
+ or modify the timeout value in the dqdriver source.
+
+2. HP has written a command procedure, that calls cdrecord. You should
+ modify this com-file to activate the cdrecord burnproof option:
+ "driveropts=burnproof".
+
+Be aware that cdrecord has copyright on it.
+
+Eberhard
+
+===============================================================================
+
+Dr. Eberhard Heuser-Hofmann
+Univ. Konstanz
+Fakultaet fuer Chemie
+Universitaets-Strasse 10
+D-78464 Konstanz
+Germany
+Phone: +49-7531-88-2026, FAX: +49-7531-88-3139
+email: vaxinf at chclu.chemie.uni-konstanz.de
+
+===============================================================================
+
Deleted: nonameyet/trunk/doc/READMEs/plattforms/README.vms
===================================================================
--- nonameyet/trunk/doc/READMEs/plattforms/README.vms 2006-09-12 08:54:01 UTC (rev 293)
+++ nonameyet/trunk/doc/READMEs/plattforms/README.vms 2006-09-12 08:54:03 UTC (rev 294)
@@ -1,140 +0,0 @@
-This README was written by Dr. Eberhard Heuser-Hofmann
- vaxinf at chclu.chemie.uni-konstanz.de
-
-If you are looking for a *.zip file instead of the tar archive,
-check this address:
-
-ftp://v36.chemie.uni-konstanz.de/cdrecord_vms/
-
-/*--------------------------------------------------------------------------*/
-Hi,
-
-this is the OpenVMS Version of J.Schilling's cdrecord-program.
-
-There is a command-procedure called build_all.com in the [.cdrecord] subdir,
-that compiles and links the code. The cdrecord-program is been produced in
-[.cdrecord.vms] subdirectory.
-
-Define this program as a symbol via
-
-$ cdrecord:==$disk:[dir]cdrecord.exe
-
-$ cdrecord -help gives an idea about the options, that are possible:
-
-cdrecord -help
-Usage: cdrecord.exe [options] track1...trackn
-Options:
- -version print version information and exit
- dev=target SCSI target to use as CD/DVD-Recorder
- gracetime=# set the grace time before starting to write to #.
- timeout=# set the default SCSI command timeout to #.
- debug=#,-d Set to # or increment misc debug level
- kdebug=#,kd=# do Kernel debugging
- -verbose,-v increment general verbose level by one
- -Verbose,-V increment SCSI command transport verbose level by one
- -silent,-s do not print status of failed SCSI commands
- driver=name user supplied driver name, use with extreme care
- driveropts=opt a comma separated list of driver specific options
- -checkdrive check if a driver for the drive is present
- -prcap print drive capabilities for MMC compliant drives
- -inq do an inquiry for the drive and exit
- -scanbus scan the SCSI bus and exit
- -reset reset the SCSI bus with the cdrecorder (if possible)
- -overburn allow to write more than the official size of a medium
- -ignsize ignore the known size of a medium (may cause problems)
- -useinfo use *.inf files to overwrite audio options.
- speed=# set speed of drive
- blank=type blank a CD-RW disc (see blank=help)
- -load load the disk and exit (works only with tray loader)
- -eject eject the disk after doing the work
- -dummy do everything with laser turned off
- -msinfo retrieve multi-session info for mkisofs >= 1.10
- -toc retrieve and print TOC/PMA data
- -atip retrieve and print ATIP data
- -multi generate a TOC that allows multi session
- In this case default track type is CD-ROM XA2
- -fix fixate a corrupt or unfixated disk (generate a TOC)
- -nofix do not fixate disk after writing tracks
- -waiti wait until input is available before opening SCSI
- -immed Try to use the SCSI IMMED flag with certain long lasting commands
- -force force to continue on some errors to allow blanking bad disks
- -dao Write disk in SAO mode. This option will be replaced in the future.
- -raw Write disk in RAW mode. This option will be replaced in the future.
- -raw96r Write disk in RAW/RAW96R mode. This option will be replaced in the future.
- -raw96p Write disk in RAW/RAW96P mode. This option will be replaced in the future.
- -raw16 Write disk in RAW/RAW16 mode. This option will be replaced in the future.
- tsize=# Length of valid data in next track
- padsize=# Amount of padding for next track
- pregap=# Amount of pre-gap sectors before next track
- defpregap=# Amount of pre-gap sectors for all but track #1
- mcn=text Set the media catalog number for this CD to 'text'
- isrc=text Set the ISRC number for the next track to 'text'
- index=list Set the index list for the next track to 'list'
- -text Write CD-Text from information from *.inf files
- textfile=name Set the file with CD-Text data to 'name'
- -audio Subsequent tracks are CD-DA audio tracks
- -data Subsequent tracks are CD-ROM data mode 1 (default)
- -mode2 Subsequent tracks are CD-ROM data mode 2
- -xa1 Subsequent tracks are CD-ROM XA mode 1
- -xa2 Subsequent tracks are CD-ROM XA mode 2
- -cdi Subsequent tracks are CDI tracks
- -isosize Use iso9660 file system size for next data track
- -preemp Audio tracks are mastered with 50/15 µs preemphasis
- -nopreemp Audio tracks are mastered with no preemphasis (default)
- -copy Audio tracks have unlimited copy permission
- -nocopy Audio tracks may only be copied once for personal use (default)
- -scms Audio tracks will not have any copy permission at all
- -pad Pad data tracks with 15 zeroed sectors
- Pad audio tracks to a multiple of 2352 bytes
- -nopad Do not pad data tracks (default)
- -shorttrack Subsequent tracks may be non Red Book < 4 seconds if in SAO or RAW mode
- -noshorttrack Subsequent tracks must be >= 4 seconds
- -swab Audio data source is byte-swapped (little-endian/Intel)
-The type of the first track is used for the toc type.
-Currently only form 1 tracks are supported.
-
-One important point is how the CDR-device is being selected:
-
-dev=i,j,k
-
-where:
-i: 0 1 2 3 4 5 6 7 8 9 ... 32 33
- dka dkb dkc dkd gka gkb gkc gkd dqa dqb ... dqy dqz
-
-j: scsi-id
-k: sub-lun (usually 0)
-
-As an example:
-
-dev=1,5,2 selects dkb502:
-
-An typical example how to put virtual disk data onto a cd-rom is given here:
-
-$ cdrecord -speed 2 dev=0,4,0 dka200:[000000]vda0.dsk
-
-Additional hints:
-
-1. Due to timeout problems use -immed switch for IDE-burners under OpenVMS 7.3
- or modify the timeout value in the dqdriver source.
-
-2. HP has written a command procedure, that calls cdrecord. You should
- modify this com-file to activate the cdrecord burnproof option:
- "driveropts=burnproof".
-
-Be aware that cdrecord has copyright on it.
-
-Eberhard
-
-===============================================================================
-
-Dr. Eberhard Heuser-Hofmann
-Univ. Konstanz
-Fakultaet fuer Chemie
-Universitaets-Strasse 10
-D-78464 Konstanz
-Germany
-Phone: +49-7531-88-2026, FAX: +49-7531-88-3139
-email: vaxinf at chclu.chemie.uni-konstanz.de
-
-===============================================================================
-
More information about the Debburn-changes
mailing list