[Debburn-devel] PLEXTOR DVDR PX-708A not properly recognised

Nenad ANTONIC nenad.antonic at gmail.com
Sun Nov 26 14:14:15 CET 2006


> Thank you very much. I think I found the reason why it tries to use the
> CD method (selfmade bug in 1.0 release). Consider testing the current
> trunk snapshot, available on
> http://rootfs.net/misc/cdrkit-snapshot-2006.11.26.tgz . There are
> precompiled binaries in bin-i386 directory, if you like them.

Thanks! The new binaries work.
(some of the diagnostics might still need some polish)

- Nenad

# /tmp/cdrkit-snapshot-2006.11.26/bin-i386/bin/wodim -v -dummy -dao
FC-6-i386-DVD.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrw'
devname: '/dev/cdrw'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PLEXTOR '
Identification : 'DVDR   PX-708A  '
Revision       : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B
Profile: 0x001B (current)
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 983040 = 960 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 27806 kB/s 157x CD 20x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data  3361 MB
Total size:     3860 MB (382:30.49) = 1721287 sectors
Lout start:     3861 MB (382:32/37) = 1721287 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
  ATIP start of lead out: 157789 (35:05/64)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 573817
Speed set to 11080 KB/s
Starting to write CD/DVD at speed   8.0 in dummy SAO mode for single session.
Last chance to quit, starting dummy write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 3361 of 3361 MB written (fifo 100%) [buf  82%]   8.5x.
Track 01: Total bytes read/written: 3525195776/3525195776 (1721287 sectors).
Writing  time:  357.136s
Average write speed   7.4x.
Min drive buffer fill was 80%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:   18.204s
Last selected write speed: 62x
Max media write speed:     62x
Last actual write speed:   62x



More information about the Debburn-devel mailing list