[Debburn-devel] Re: Problem recording with new system
Eduard Martinescu
martines at rochester.rr.com
Tue Feb 27 17:03:55 CET 2007
Answers inlined below
On Sunday 25 February 2007 07:48:35 am scdbackup at gmx.net wrote:
> Hi,
>
> > Output of 'wodib -v -checkdrive dev=/dev/cdrw'
> > ...
> > Identification : 'DVD-RAM GSA-H30N'
> > ...
> > To my surprise, it seems there are NO supported modes listed.
>
> Out of curiosity and with no insight into wodim's
> ways with drive capability detection:
> Where is /dev/cdrw pointing at ?
> ls -l /dev/cdrw
lrwxrwxrwx 1 root root 3 Feb 21 12:09 /dev/cdrw -> sr0
brw-rw---- 1 root cdrom 11, 0 Feb 21 12:09 /dev/sr0
> Do you get any device addresses listed by
> eginning native device scan. This may take a while if devices are busy...
> wodim --devices
wodim: Overview of accessible drives (1 found) :
----------------------------------------------------------------------
0 dev='/dev/sr0' rwrw-- : 'HL-DT-ST' 'DVD-RAM GSA-H30N'
----------------------------------------------------------------------
> wodim -scanbus
Beginning native device scan. This may take a while if devices are busy...
wodim: Overview of accessible drives (1 found) :
----------------------------------------------------------------------
0 dev='/dev/sr0' rwrw-- : 'HL-DT-ST' 'DVD-RAM GSA-H30N'
----------------------------------------------------------------------
DLKTZT79 mplayerplug-in # wodim -scanbus
scsibus0:
0,0,0 0) 'ATA ' 'ST3808110AS ' '3.AA' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'HL-DT-ST' 'DVD-RAM GSA-H30N' '1.04' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
scsibus2:
2,0,0 200) 'ATA ' 'WDC WD3000JS-00P' '21.0' Disk
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *
> wodim dev=ATA -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
More information about the Debburn-devel
mailing list