[Debburn-devel] Audio CD creation problem with 1.1.1

Mark E. Fenner fenner at cs.pitt.edu
Fri Jan 19 16:36:45 CET 2007


Hi folks,

Not sure if this is the right forum for issues, but here goes.  Things work 
just fine when burning ordinary files to a data cd, but they break when I try 
to burn an audio cd.  It throws the following error message:

Starting new track at sector: 0 
 Track 01:    0 of   67 MB written.Errno: 0 (Success), write_g1 scsi sendcmd: 
no error 
 CDB:  2A 00 00 00 00 00 00 00 1B 00 
 status: 0x2 (CHECK CONDITION) 
 Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00 
 Sense Key: 0x4 Hardware Error, Segment 0 
 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error 
(ultra-dma/32)) Fru 0x0 
 Sense flags: Blk 0 (not valid) 
 resid: 63504 
 cmd finished after 0.005s timeout 200s 

This is under kernels 2-6.18-r3 and r6 ... also showed up under 
cdrtools-2.01.01_alpha10; cdrkit-1.1.0 and cdrkit-1.1.1.

Any pointers on how to attack this would be appreciated.

Regards,
Mark

Here is the complete log:

(note, cdrecord is a symlink to wodim): 
lrwxrwxrwx 1 root root 14 Jan 18 11:33 /usr/bin/cdrecord -> /usr/bin/wodim*
-rwsr-xr-x 1 root root 353740 Jan 18 11:33 /usr/bin/wodim*

 /usr/bin/cdrecord -v gracetime=2 dev=/dev/hda speed=1 -dao -dummy 
driveropts=burnfree -eject -useinfo -audio /tmp/kde-user/k3b_audio_1_??.wav 
 TOC Type: 0 = CD-DA 
 wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK 
limits.scsidev: '/dev/hda' 
 devname: '/dev/hda' 
 scsibus: -2 target: -2 lun: -2 
 Linux sg driver version: 3.5.27 
 Wodim version: 1.1.1 
 Driveropts: 'burnfree' 
 SCSI buffer size: 64512 
 atapi: 1 
 Device type    : Removable CD-ROM 
 Version        : 0 
 Response Format: 2 
 Capabilities   : 
 Vendor_info    : 'PIONEER ' 
 Identification : 'DVD-RW  DVR-111D' 
 Revision       : '1.23' 
 Device seems to be: Generic mmc2 DVD-R/DVD-RW. 
 Current: 0x0009 (CD-R) 
 Profile: 0x002B (DVD+R/DL) 
 Profile: 0x001B (DVD+R) 
 Profile: 0x001A (DVD+RW) 
 Profile: 0x0016 (DVD-R/DL layer jump recording) 
 Profile: 0x0015 (DVD-R/DL sequential recording) 
 Profile: 0x0014 (DVD-RW sequential recording) 
 Profile: 0x0013 (DVD-RW restricted overwrite) 
 Profile: 0x0011 (DVD-R sequential recording) 
 Profile: 0x0010 (DVD-ROM) 
 Profile: 0x000A (CD-RW) 
 Profile: 0x0009 (CD-R) (current) 
 Profile: 0x0008 (CD-ROM) 
 Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr). 
 Driver flags   : MMC-3 SWABAUDIO BURNFREE 
 Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R 
 Drive buf size : 1267712 = 1238 KB 
 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device 
 communication breaks or freezes immediately after that. 
 FIFO size      : 4194304 = 4096 KB 
 Track 01: audio   67 MB (06:40.36) no preemp 
 Track 02: audio   43 MB (04:18.30) no preemp 
 Track 03: audio   76 MB (07:34.82) no preemp 
 Track 04: audio   85 MB (08:28.40) no preemp 
 Track 05: audio   21 MB (02:05.97) no preemp 
 Track 06: audio   77 MB (07:40.00) no preemp 
 Track 07: audio   66 MB (06:34.77) no preemp 
 Track 08: audio   85 MB (08:31.04) no preemp 
 Track 09: audio   74 MB (07:24.48) no preemp 
 Track 10: audio    8 MB (00:52.28) no preemp 
 Track 11: audio   73 MB (07:17.74) no preemp 
 Track 12: audio  102 MB (10:10.12) no preemp 
 Total size:      783 MB (77:38.30) = 349373 sectors 
 Lout start:      783 MB (77:40/23) = 349373 sectors 
 Current Secsize: 2048 
 ATIP info from disk: 
   Indicated writing power: 4 
   Is not unrestricted 
   Is not erasable 
   Disk sub type: Medium Type A, high Beta category (A+) (3) 
   ATIP start of lead in:  -11077 (97:34/23) 
   ATIP start of lead out: 359848 (79:59/73) 
 Disk type:    Long strategy type (Cyanine, AZO or similar) 
 Manuf. index: 11 
 Manufacturer: Mitsubishi Chemical Corporation 
 Blocks total: 359848 Blocks current: 359848 Blocks remaining: 10475 
 Speed set to 705 KB/s 
 Starting to write CD/DVD at speed   4.0 in dummy SAO mode for single session. 
 Last chance to quit, starting dummy write    0 seconds. Operation starts. 
 Waiting for reader process to fill input buffer ... input buffer ready. 
 Sending CUE sheet... 
 Writing pregap for track 1 at -150 
 Starting new track at sector: 0 
**************************************************************
 Track 01:    0 of   67 MB written.Errno: 0 (Success), write_g1 scsi sendcmd: 
no error 
 CDB:  2A 00 00 00 00 00 00 00 1B 00 
 status: 0x2 (CHECK CONDITION) 
 Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00 
 Sense Key: 0x4 Hardware Error, Segment 0 
 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error 
(ultra-dma/32)) Fru 0x0 
 Sense flags: Blk 0 (not valid) 
 resid: 63504 
 cmd finished after 0.005s timeout 200s 
 **************************************************************
 write track data: error after 0 bytes 
 wodim: A write error occured. 
 wodim: Please properly read the error message above. 
 Writing  time:    6.670s 
 Average write speed 924.9x. 
 Fixating... 
 WARNING: Some drives don't like fixation in dummy mode. 
 Errno: 0 (Success), flush cache scsi sendcmd: no error 
 CDB:  35 00 00 00 00 00 00 00 00 00 
 status: 0x2 (CHECK CONDITION) 
 Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 44 00 00 00 
 Sense Key: 0x4 Hardware Error, Segment 0 
 Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0 
 Sense flags: Blk 0 (not valid) 
 cmd finished after 37.514s timeout 200s 
 Trouble flushing the cache 
 Fixating time:   37.526s 



More information about the Debburn-devel mailing list