[Debburn-devel] wodim and Dual Layer Media issues.
Fernando
email at missionaccomplish.com
Sun Sep 30 20:10:51 UTC 2007
Well I don't know if this is a known bug or limitation but I can't seem
to burn any Dual Layer Media using wodim but I can successfully with
growisofs.
# time cdrecord -v -dao dev=/dev/dvd1 driveropts=burnfree image.iso #
note that i also tried with -sao option with same results.
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvd1'
devname: '/dev/dvd1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identification : 'DVDRW LH-20A1L '
Revision : 'BL01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x002B (DVD+R/DL)
Profile: 0x002B (DVD+R/DL) (current)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1068032 = 1043 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if
device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 8133 MB
Total size: 9340 MB (925:23.61) = 4164271 sectors
Lout start: 9340 MB (925:25/46) = 4164271 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 9553
Speed set to 11080 KB/s
Starting to write CD/DVD at speed 8.0 in real SAO mode for single
session.
Last chance to quit, starting real write i 0 seconds. Operation
starts.
Preparing middle zone location for this DVD+R dual layer disc
dvd_dual_layer_split: read_dvd_structure returns invalid data
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 4075 of 8133 MB written (fifo 99%) [buf 99%] 8.2x.Errno: 5
(Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 1F D7 E9 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 200.710s timeout 200s
write track data: error after 4273948672 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.024s timeout 200s
Writing time: 766.104s
Average write speed 8.9x.
Min drive buffer fill was 25%
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.160s timeout 200s
Trouble flushing the cache
wodim: Cannot fixate disk.
Fixating time: 0.160s
wodim: fifo had 67510 puts and 67320 gets.
wodim: fifo was 16 times empty and 17371 times full, min fill was 0%.
real 12m55.037s
user 0m0.424s
sys 0m4.695s
MEDIA INFO
INQUIRY: [LITE-ON ][DVDRW LH-20A1L ][BL01]
GET [CURRENT] CONFIGURATION:
Mounted Media: 2Bh, DVD+R Double Layer
Media ID: RITEK/S04
Current Write Speed: 8.0x1385=11080KB/s
Write Speed #0: 8.0x1385=11080KB/s
Write Speed #1: 6.0x1385=8310KB/s
Write Speed #2: 4.0x1385=5540KB/s
Write Speed #3: 2.4x1385=3324KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 3.2x1385=4432KB/s@[0 -> 0]
Speed Descriptor#0: 00/0 R at 4.8x1385=6648KB/s W at 8.0x1385=11080KB/s
Speed Descriptor#1: 00/0 R at 4.8x1385=6648KB/s W at 6.0x1385=8310KB/s
Speed Descriptor#2: 00/0 R at 4.8x1385=6648KB/s W at 4.0x1385=5540KB/s
Speed Descriptor#3: 00/0 R at 4.8x1385=6648KB/s W at 2.4x1385=3324KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Legacy lead-out at: 2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
Disc status: appendable
Number of Sessions: 1
State of Last Session: incomplete
"Next" Track: 1
Number of Tracks: 2
READ TRACK INFORMATION[#1]:
Track State: partial/complete
Track Start Address: 0*2KB
Next Writable Address: 2086912*2KB
Free Blocks: 2077360*2KB
Track Size: 4164272*2KB
READ TRACK INFORMATION[#2]:
Track State: blank
Track Start Address: 4164288*2KB
Next Writable Address: 4164288*2KB
Free Blocks: 9536*2KB
Track Size: 9536*2KB
ROM Compatibility LBA: 262144
READ CAPACITY: 0*2048=0
SYSTEM INFO
gcc-4.2.0
glibc-2.6.1-r0
2.6.22 kernel x86_64
System CPU: Dual Core AMD Opteron(tm) Processor 165
cdrkit-1.1.6
--
Fernando <email at missionaccomplish.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/debburn-devel/attachments/20070930/fb5f52ea/attachment.htm
More information about the Debburn-devel
mailing list