[Debburn-devel] driveropts=burnfree' does not work
surfed
god at youhavechoice.com
Fri Jan 22 00:36:27 UTC 2010
On my Dell XPS 16 i get this error when burning cds, dvds sometimes burn at
0.3x, other times they fail. I have used other burning programs and tried
direct burning from cli with same result. Drive and media work fine under
win7, so the problem is not hardware.
Surfed
Devices
-----------------------
CDEmu Virt. CD/DVD-ROM 1.10 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM]
[None] [%7]
HL-DT-ST DVD+-RW GA11N A102 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R
Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW
Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO,
RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]
[%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 47958 (98217984 bytes)
System
-----------------------
K3b Version: 1.69.0
KDE Version: 4.3.95 (KDE 4.3.95 (KDE 4.4 RC2))
QT Version: 4.6.1
Kernel: 2.6.33-rc4-rc4
Used versions
-----------------------
mkisofs: 1.1.10
cdrecord: 1.1.10
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD+-RW GA11N '
Revision : 'A102'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15215 kB/s 86x CD 10x DVD
FIFO size : 4194304 = 4096 KB
Speed set to 2822 KB/s
Track 01: data 93 MB
Total size: 107 MB (10:39.46) = 47960 sectors
Lout start: 107 MB (10:41/35) = 47960 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 311886
Starting to write CD/DVD at speed 16.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 93 MB written.
Track 01: 1 of 93 MB written (fifo 100%) [buf 99%] 0.4x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 40s
/usr/bin/wodim: The current problem looks like a buffer underrun.
/usr/bin/wodim: It looks like 'driveropts=burnfree' does not work for this
drive.
/usr/bin/wodim: Please report.
/usr/bin/wodim: Make sure that you are root, enable DMA and check your HW/OS
set up.
write track data: error after 1079296 bytes
Writing time: 25.131s
Average write speed 25.5x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 27.574s
/usr/bin/wodim: fifo had 81 puts and 18 gets.
/usr/bin/wodim: fifo was 0 times empty and 7 times full, min fill was 92%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -tao driveropts=burnfree
-multi fs=4m -xa -tsize=47958s -
mkisofs
-----------------------
47958
I: -input-charset not specified, using utf-8 (detected in locale settings)
1.07% done, estimate finish Thu Jan 21 16:25:41 2010
2.11% done, estimate finish Thu Jan 21 16:24:55 2010
3.14% done, estimate finish Thu Jan 21 16:24:39 2010
4.18% done, estimate finish Thu Jan 21 16:24:31 2010
5.24% done, estimate finish Thu Jan 21 16:30:48 2010
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Antonio
Vivaldi -volset -appid K3B THE CD KREATOR (C) 1998-2009 SEBASTIAN TRUEG
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-sascha/k3bRt8318.tmp -rational-rock -hide-list
/tmp/kde-sascha/k3bmI8318.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-sascha/k3bKr8318.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-sascha/k3bwG8318.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Antonio Vivaldi -volset
-appid K3B THE CD KREATOR (C) 1998-2009 SEBASTIAN TRUEG -publisher
-preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-sascha/k3bBz8318.tmp -rational-rock -hide-list
/tmp/kde-sascha/k3bMW8318.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-sascha/k3bfx8318.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-sascha/k3bgB8318.tmp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/debburn-devel/attachments/20100121/e8b4215b/attachment.htm>
More information about the Debburn-devel
mailing list