[Debian-eeepc-devel] 1201N : touchpad doesn't work with two finger scrolling unter Lenny
Shawn Lamson
shawn.lamson at att.net
Mon Jan 18 15:43:22 UTC 2010
On Mon, 18 Jan 2010 09:47:00 +0100
giggzounet <giggzounet at gmail.com> wrote:
> Hi,
>
> I have Lenny with backports on the 1201N. I'm running unter the 2.6.30 of
> lenny backports. The two finger scrolling doesn't work at all unter X (with
> e17 as wm). I have enable it in my xorg.conf :
just a thought - is there a reason for not using the sid repositories? the 1201N
is bleeding edge hardware... you'd expect to find the best support for it in
experimental.
>
> Option "SHMConfig" "on"
> Option "VertTwoFingerScroll" "1"
> Option "HorizTwoFingerScroll" "1"
>
> then restart X. nothing...I have tested with a more recent kernel (2.6.32 of
> sid), it doesn't work too.
> I have installed gsynaptics and it doesn't work too.
>
> Is Lenny too old for the two fingers scrolling ?
>
> I have read a few pages on elantech touchpad...How can I know, if the 1201N
> has or hasn't an elantech touchpad ?
>
check http://wiki.debian.org/DebianEeePC/HowTo/ElantechTouchpad ...
try #cat /proc/bus/input/devices ... on my 901 shows
I: Bus=0011 Vendor=0002 Product=000e Version=0000
N: Name="ETPS/2 Elantech Touchpad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=mouse0 event6
B: EV=f
B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
B: REL=3
B: ABS=f0003
or hal
# hal-device $(hal-find-by-capability --capability input.touchpad)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
input.device = '/dev/input/event6' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'ETPS/2 Elantech Touchpad' (string)
input.x11_options.HorizTwoFingerScroll = '1' (string)
input.x11_options.TapButton1 = '1' (string)
input.x11_options.VertTwoFingerScroll = '1' (string)
input.x11_options.TapButton3 = '3' (string)
input.x11_options.TapButton2 = '2' (string)
info.subsystem = 'input' (string)
info.product = 'ETPS/2 Elantech Touchpad' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input6/event6' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.category = 'input' (string)
info.capabilities = { 'input', 'input.mouse', 'input.touchpad' } (string list)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
linux.device_file = '/dev/input/event6' (string)
if you are using lenny repositories this
may not apply, but check which versions of xserver-xorg-core and
xserver-xorg-input-synaptics you are using... for the latest ones
I had to use udev rules instead of hal .fdi policy file.
I use synclient rather than gsynaptics to test from the commandline.
Shawn
> Best regards,
> Guillaume
--
Shawn Lamson
shawn /dot/ lamson /at/ att /dot/ net
More information about the Debian-eeepc-devel
mailing list