[Debian-ha-commits] [fence-agents] 01/04: Imported Upstream version 4.0.23
Christoph Berg
myon at debian.org
Wed Jul 6 13:21:55 UTC 2016
This is an automated email from the git hooks/post-receive script.
myon pushed a commit to branch master
in repository fence-agents.
commit 0c141daf4b1dc5dd2e73a780e49ec85752738cdf
Author: Christoph Berg <christoph.berg at credativ.de>
Date: Wed Jul 6 14:25:13 2016 +0200
Imported Upstream version 4.0.23
---
.tarball-version | 2 +-
.version | 2 +-
ChangeLog | 268 +
Makefile.in | 9 +
aclocal.m4 | 235 +
configure | 328 +-
configure.ac | 61 +-
doc/Makefile.in | 9 +
fence/Makefile.in | 9 +
fence/agents/Makefile.am | 86 +-
fence/agents/Makefile.in | 820 +-
fence/agents/alom/Makefile.am | 17 -
fence/agents/alom/Makefile.in | 669 -
fence/agents/alom/fence_alom.py | 2 +-
fence/agents/amt/Makefile.am | 17 -
fence/agents/amt/Makefile.in | 669 -
fence/agents/amt/fence_amt.py | 6 +-
fence/agents/amt_ws/fence_amt_ws.py | 243 +
fence/agents/apc/Makefile.am | 17 -
fence/agents/apc/Makefile.in | 669 -
fence/agents/apc/fence_apc.py | 25 +-
fence/agents/apc_snmp/Makefile.am | 24 -
fence/agents/apc_snmp/Makefile.in | 676 -
fence/agents/apc_snmp/README | 45 -
fence/agents/apc_snmp/fence_apc_snmp.py | 9 +-
fence/agents/apc_snmp/powernet369.mib | 31109 -------------------
fence/agents/bladecenter/Makefile.am | 17 -
fence/agents/bladecenter/Makefile.in | 669 -
fence/agents/bladecenter/fence_bladecenter.py | 6 +-
fence/agents/brocade/Makefile.am | 17 -
fence/agents/brocade/Makefile.in | 669 -
fence/agents/brocade/fence_brocade.py | 2 +-
fence/agents/cisco_mds/Makefile.am | 17 -
fence/agents/cisco_mds/Makefile.in | 669 -
fence/agents/cisco_mds/fence_cisco_mds.py | 4 +-
fence/agents/cisco_ucs/Makefile.am | 17 -
fence/agents/cisco_ucs/Makefile.in | 669 -
fence/agents/cisco_ucs/fence_cisco_ucs.py | 40 +-
fence/agents/compute/Makefile.am | 17 -
fence/agents/compute/Makefile.in | 669 -
fence/agents/compute/fence_compute.py | 194 +-
fence/agents/docker/Makefile.am | 17 -
fence/agents/docker/Makefile.in | 669 -
fence/agents/docker/fence_docker.py | 8 +-
fence/agents/drac/Makefile.am | 17 -
fence/agents/drac/Makefile.in | 669 -
fence/agents/drac/fence_drac.py | 2 +-
fence/agents/drac5/Makefile.am | 17 -
fence/agents/drac5/Makefile.in | 669 -
fence/agents/drac5/fence_drac5.py | 8 +-
fence/agents/dummy/Makefile.am | 15 -
fence/agents/dummy/Makefile.in | 668 -
fence/agents/dummy/fence_dummy.py | 16 +-
fence/agents/eaton_snmp/Makefile.am | 18 -
fence/agents/eaton_snmp/Makefile.in | 671 -
fence/agents/eaton_snmp/README | 20 -
fence/agents/eaton_snmp/fence_eaton_snmp.py | 6 +-
fence/agents/emerson/Makefile.am | 17 -
fence/agents/emerson/Makefile.in | 669 -
fence/agents/emerson/fence_emerson.py | 2 +-
fence/agents/eps/Makefile.am | 17 -
fence/agents/eps/Makefile.in | 669 -
fence/agents/eps/fence_eps.py | 13 +-
fence/agents/hds_cb/Makefile.am | 17 -
fence/agents/hds_cb/Makefile.in | 669 -
fence/agents/hds_cb/fence_hds_cb.py | 2 +-
fence/agents/hpblade/Makefile.am | 17 -
fence/agents/hpblade/Makefile.in | 669 -
fence/agents/hpblade/fence_hpblade.py | 6 +-
fence/agents/ibmblade/Makefile.am | 17 -
fence/agents/ibmblade/Makefile.in | 669 -
fence/agents/ibmblade/fence_ibmblade.py | 2 +-
fence/agents/ifmib/Makefile.am | 18 -
fence/agents/ifmib/Makefile.in | 671 -
fence/agents/ifmib/README | 45 -
fence/agents/ifmib/fence_ifmib.py | 4 +-
fence/agents/ilo/Makefile.am | 22 -
fence/agents/ilo/Makefile.in | 673 -
fence/agents/ilo/fence_ilo.py | 4 +-
fence/agents/ilo_moonshot/Makefile.am | 17 -
fence/agents/ilo_moonshot/Makefile.in | 669 -
fence/agents/ilo_moonshot/fence_ilo_moonshot.py | 2 +-
fence/agents/ilo_mp/Makefile.am | 17 -
fence/agents/ilo_mp/Makefile.in | 669 -
fence/agents/ilo_mp/fence_ilo_mp.py | 2 +-
fence/agents/ilo_ssh/Makefile.am | 22 -
fence/agents/ilo_ssh/Makefile.in | 673 -
fence/agents/ilo_ssh/fence_ilo_ssh.py | 3 +-
fence/agents/intelmodular/Makefile.am | 17 -
fence/agents/intelmodular/Makefile.in | 669 -
fence/agents/intelmodular/fence_intelmodular.py | 2 +-
fence/agents/ipdu/Makefile.am | 17 -
fence/agents/ipdu/Makefile.in | 669 -
fence/agents/ipdu/fence_ipdu.py | 6 +-
fence/agents/ipmilan/Makefile.am | 22 -
fence/agents/ipmilan/Makefile.in | 673 -
fence/agents/ipmilan/fence_ipmilan.py | 23 +-
fence/agents/kdump/Makefile.am | 20 -
fence/agents/kdump/Makefile.in | 863 -
fence/agents/kdump/fence_kdump.8 | 155 +-
fence/agents/kdump/fence_kdump.c | 45 +-
fence/agents/ldom/Makefile.am | 17 -
fence/agents/ldom/Makefile.in | 669 -
fence/agents/ldom/fence_ldom.py | 4 +-
fence/agents/lib/Makefile.in | 26 +-
fence/agents/lib/XenAPI.py.py | 21 +-
fence/agents/lib/check_used_options.py | 12 +-
fence/agents/lib/fencing.py.py | 206 +-
fence/agents/lib/fencing_snmp.py.py | 18 +-
fence/agents/lpar/Makefile.am | 17 -
fence/agents/lpar/Makefile.in | 669 -
fence/agents/lpar/fence_lpar.py | 4 +-
fence/agents/manual/Makefile.am | 17 -
fence/agents/manual/Makefile.in | 595 -
fence/agents/mpath/Makefile.am | 17 -
fence/agents/mpath/Makefile.in | 669 -
fence/agents/mpath/fence_mpath.py | 6 +-
fence/agents/netio/Makefile.am | 17 -
fence/agents/netio/Makefile.in | 669 -
fence/agents/netio/fence_netio.py | 6 +-
fence/agents/ovh/Makefile.am | 17 -
fence/agents/ovh/Makefile.in | 669 -
fence/agents/ovh/fence_ovh.py | 4 +-
fence/agents/pve/Makefile.am | 17 -
fence/agents/pve/Makefile.in | 669 -
fence/agents/pve/fence_pve.py | 17 +-
fence/agents/raritan/Makefile.am | 17 -
fence/agents/raritan/Makefile.in | 669 -
fence/agents/raritan/fence_raritan.py | 2 +-
fence/agents/rcd_serial/Makefile.am | 20 -
fence/agents/rcd_serial/Makefile.in | 671 -
fence/agents/rcd_serial/fence_rcd_serial.py | 3 +-
fence/agents/rhevm/Makefile.am | 17 -
fence/agents/rhevm/Makefile.in | 669 -
fence/agents/rhevm/fence_rhevm.py | 18 +-
fence/agents/rsa/Makefile.am | 17 -
fence/agents/rsa/Makefile.in | 669 -
fence/agents/rsa/fence_rsa.py | 2 +-
fence/agents/rsb/Makefile.am | 17 -
fence/agents/rsb/Makefile.in | 669 -
fence/agents/rsb/fence_rsb.py | 4 +-
fence/agents/sanbox2/Makefile.am | 17 -
fence/agents/sanbox2/Makefile.in | 669 -
fence/agents/sanbox2/fence_sanbox2.py | 6 +-
fence/agents/sbd/Makefile.am | 17 -
fence/agents/sbd/Makefile.in | 669 -
fence/agents/sbd/fence_sbd.py | 14 +-
fence/agents/scsi/Makefile.am | 29 -
fence/agents/scsi/Makefile.in | 717 -
fence/agents/scsi/fence_scsi.py | 8 +-
fence/agents/vbox/Makefile.am | 17 -
fence/agents/vbox/Makefile.in | 669 -
fence/agents/vbox/fence_vbox.py | 2 +-
fence/agents/virsh/Makefile.am | 17 -
fence/agents/virsh/Makefile.in | 669 -
fence/agents/virsh/fence_virsh.py | 12 +-
fence/agents/vmware/Makefile.am | 16 -
fence/agents/vmware/Makefile.in | 638 -
fence/agents/vmware/fence_vmware.py | 10 +-
fence/agents/vmware/fence_vmware_helper.pl | 276 -
fence/agents/vmware_soap/Makefile.am | 17 -
fence/agents/vmware_soap/Makefile.in | 669 -
fence/agents/vmware_soap/fence_vmware_soap.py | 16 +-
fence/agents/wti/Makefile.am | 17 -
fence/agents/wti/Makefile.in | 669 -
fence/agents/wti/fence_wti.py | 14 +-
fence/agents/xenapi/Makefile.am | 17 -
fence/agents/xenapi/Makefile.in | 669 -
fence/agents/xenapi/fence_xenapi.py | 38 +-
fence/agents/zvm/Makefile.am | 27 -
fence/agents/zvm/Makefile.in | 882 -
fence/agents/zvm/fence_zvm.c | 4 +-
fence/agents/zvm/fence_zvm_man_page | 87 -
fence/agents/zvm/fence_zvmip.py | 2 +-
make/ac_python_module.m4 | 2 +-
make/agentccheck.mk | 22 -
make/agentpycheck.mk | 55 +-
make/fencebuild.mk | 19 +-
make/fenceman.mk | 13 +-
.../metadata/{fence_imm.xml => fence_amt_ws.xml} | 69 +-
tests/data/metadata/fence_apc_snmp.xml | 1 +
tests/data/metadata/fence_cisco_ucs.xml | 5 +
tests/data/metadata/fence_compute.xml | 16 +-
tests/data/metadata/fence_docker.xml | 10 +-
tests/data/metadata/fence_idrac.xml | 2 +-
tests/data/metadata/fence_ilo3.xml | 2 +-
tests/data/metadata/fence_ilo4.xml | 2 +-
tests/data/metadata/fence_imm.xml | 2 +-
tests/data/metadata/fence_ipmilan.xml | 2 +-
tests/data/metadata/fence_mpath.xml | 2 +-
tests/data/metadata/fence_scsi.xml | 4 +-
tests/data/metadata/fence_tripplite_snmp.xml | 1 +
.../metadata/{fence_ilo3.xml => fence_vmware.xml} | 104 +-
tests/fence_testing.py | 16 +-
tests/fence_testing_test.py | 14 +-
195 files changed, 2602 insertions(+), 67216 deletions(-)
diff --git a/.tarball-version b/.tarball-version
index 094cee5..f05f0cb 100644
--- a/.tarball-version
+++ b/.tarball-version
@@ -1 +1 @@
-4.0.22
+4.0.23
diff --git a/.version b/.version
index 094cee5..f05f0cb 100644
--- a/.version
+++ b/.version
@@ -1 +1 @@
-4.0.22
+4.0.23
diff --git a/ChangeLog b/ChangeLog
index 716bde1..8e86700 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,245 @@
+2016-06-29 Marek 'marx' Grac <mgrac at redhat.com>
+
+ build: clean-up of CLEAN_TARGET_ADDITIONAL
+
+ build: Do not fail if manual/ exists
+
+2016-06-27 Marek 'marx' Grac <mgrac at redhat.com>
+
+ build: Properly handle fence_ack_manual
+
+ build: Fix release scripts
+
+ build: Check if pywsman is installed
+
+2016-06-22 marxsk <mgrac at redhat.com>
+
+ Merge pull request #78 from oalbrigt/fence_compute-indent-fix
+ fence_compute: fix indent issue
+
+ Merge pull request #79 from oalbrigt/fence_apc-fix-connection-timed-out
+ fence_apc: fix for connection timed out issue
+
+2016-06-22 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ fence_apc: fix for connection timed out issue
+
+2016-06-16 marxsk <mgrac at redhat.com>
+
+ Merge pull request #73 from vvidic/master
+ fence_sbd: fix return value of fence functions
+
+2016-06-14 Andrew Beekhof <andrew at beekhof.net>
+
+ compute: Correctly handle installations without tagged flavours
+
+2016-06-07 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ fence_compute: fix indent issue
+
+2016-06-06 marxsk <mgrac at redhat.com>
+
+ Merge pull request #74 from oalbrigt/parallel-build
+ Parallel build
+
+2016-06-02 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ fence_pve: fix indentation
+
+ Parallel build
+
+2016-06-02 Valentin Vidic <Valentin.Vidic at CARNet.hr>
+
+ fence_sbd: return value of fence functions is bool
+
+2016-05-11 Marek 'marx' Grac <mgrac at redhat.com>
+
+ Merge branch 'master' of https://github.com/ClusterLabs/fence-agents
+
+2016-06-02 marxsk <mgrac at redhat.com>
+
+ Merge pull request #34 from aspiers/fix/typos
+ Fix a couple of typos
+
+ Merge pull request #48 from credativ/install-fence_zvm.h
+ Install missing fence_zvm.h into release tarball
+
+ Merge pull request #75 from xtavras/fence_pve_fix
+ this fix allows to use dedicated user for fencing, not only root at pam
+
+ Merge pull request #69 from oalbrigt/onoff-cycle-cleanup
+ onoff/cycle cleanup
+
+2016-06-02 Andrew Beekhof <andrew at beekhof.net>
+
+ compute: Allow evacuation to be disabled
+ instance-filtering = false
+ - nothing happens
+
+ instance-filtering = true and no flavors or images tagged
+ - evacuate everything for compatibility with OSP 8
+
+ instance-filtering = true and at least one flavor or image is tagged
+ - evacuate only the instances derived from those flavors and/or images
+
+2016-05-27 Andrew Beekhof <andrew at beekhof.net>
+
+ compute: Correctly enable filtering and fix related bugs
+ Enable tag based filtering when any images or flavors are found with the
+ 'evacuable' tag. Otherwise continue to evacuate all instances.
+
+ Also fix a number of bugs in the code that determines which instances
+ should be evacuated.
+
+2016-05-25 Stanislav Kopp <stanislav.kopp at native-instruments.de>
+
+ this fix allows to use dedicated user for fencing, not only root at pam
+
+2016-05-25 marxsk <mgrac at redhat.com>
+
+ Merge pull request #67 from oalbrigt/scsi-shouldnt-reference-dm
+ Remove reference to /dev/dm-X devices
+
+ Merge pull request #68 from oalbrigt/fence_ipmilan-warning-about-success-before-node-is-powered-off
+ fence_ipmilan: add warning that cycle method can report success before node is powered off
+
+2016-05-18 marxsk <mgrac at redhat.com>
+
+ Merge pull request #70 from oalbrigt/python3-support
+ Python 3 support
+
+2016-05-10 Valentin Vidic <Valentin.Vidic at CARNet.hr>
+
+ fence_sbd: fix return value of fence functions
+ sbd command exits with 0 on success but fence functions
+ should return True in this case
+
+2016-05-10 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ fence_compute: Python 3 support
+
+ Merge remote-tracking branch 'upstream/master' into python3-support
+
+2016-05-09 Andrew Beekhof <andrew at beekhof.net>
+
+ fence_compute: fix expected metadata
+
+ fence_compute: improved handling of compute nodes with/without FQDNs
+
+2016-04-28 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ Python 3 support
+
+2016-04-20 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ onoff/cycle cleanup
+
+ Remove reference to /dev/dm-X devices
+
+ fence_ipmilan: add warning that cycle method can report success before node is powered off
+
+2016-04-07 marxsk <mgrac at redhat.com>
+
+ Merge pull request #65 from oalbrigt/travis-openwsman-fix
+ travis: fix for openwsman test
+
+2016-04-06 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ travis: fix for openwsman test
+
+2016-03-22 Andrew Beekhof <andrew at beekhof.net>
+
+ Merge pull request #37 from vuntz/compute-options
+ fence_compute: Add --insecure and --region-name command line arguments
+
+2016-03-17 Andrew Beekhof <andrew at beekhof.net>
+
+ fence_compute: additional debug logging for when things go wrong
+
+ fence_compute: Correctly locate all instances to be evacuated
+
+2016-03-14 marxsk <mgrac at redhat.com>
+
+ Merge pull request #47 from credativ/zvm-help
+ Print fence_zvm --help to stdout and exit with status 0
+
+ Merge pull request #63 from disco-stu/fence_ipdu-syspath
+ fence_ipdu: fix hardcoded FENCEAGENTSLIBDIR.
+
+2016-03-13 Adrian Vondendriesch <adrian.vondendriesch at credativ.de>
+
+ fence_ipdu: fix hardcoded FENCEAGENTSLIBDIR.
+ FENCEAGENTSLIBDIR was hardcoded to "/usr/share/fence".
+
+2016-03-03 marxsk <mgrac at redhat.com>
+
+ Merge pull request #49 from oalbrigt/fence_amt_ws
+ fence_amt_ws: new fence-agent
+
+2016-03-03 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ fence_amt_ws: new fence-agent
+
+2016-02-11 Adam Spiers <aspiers at suse.com>
+
+ fix "foce" typo
+
+ fix "it's" typo
+
+2016-02-09 Marek 'marx' Grac <mgrac at redhat.com>
+
+ fence_cisco_ucs: Update XML metadata
+
+ fence_cisco_ucs: Add --missing-as-off
+
+ fence_cisco_ucs: Obtain 'status' from different attribute
+
+2016-02-06 Christoph Berg <myon at debian.org>
+
+ Install missing fence_zvm.h into release tarball
+
+ Print fence_zvm --help to stdout and exit with status 0
+ This makes fence_zvm --help conform with the other fence agents
+ behavior.
+
+2016-02-01 Marek 'marx' Grac <mgrac at redhat.com>
+
+ fence_cisco_ucs: Obtain status of device from different endpoint
+ Resolves: rhbz#1298430
+
+2016-01-28 marxsk <mgrac at redhat.com>
+
+ Merge pull request #40 from oalbrigt/fence_scsi-fix-typo-in-short-desc
+ fence_scsi: fix "persistentl" typo in short desc
+
+2016-01-28 Oyvind Albrigtsen <oalbrigt at redhat.com>
+
+ fence_scsi: fix "persistentl" typo in short desc
+
+2016-01-27 marxsk <mgrac at redhat.com>
+
+ Merge pull request #39 from kwaping/add_doc_link
+ docs: added link to cluster wiki in README
+
+2016-01-27 Ollie Ready <kwaping at users.noreply.github.com>
+
+ docs: added link to cluster wiki in README
+
+2016-01-20 Marek 'marx' Grac <mgrac at redhat.com>
+
+ fence_compute: Fix indentation
+ Mixed indentation is not allowed with 'python -tt'
+
+2016-01-07 Vincent Untz <vuntz at suse.com>
+
+ fence_compute: Add --region-name command line argument
+ Useful for multi-region setups.
+
+ fence_compute: Add --insecure command line argument
+ This makes it possible to have fence_compute work with OpenStack
+ deployments with SSL certificates that can't be verified (can be the
+ case in test systems).
+
2016-01-06 Marek 'marx' Grac <mgrac at redhat.com>
fence_zvmip: Fix makefile to work with dist* targets
@@ -88,6 +330,32 @@
fix 'evacute' typo
This requires the corresponding fix in NovaCompute and NovaEvacuate.
+2015-11-16 Marek 'marx' Grac <mgrac at redhat.com>
+
+ fix
+
+ cleanup
+
+ next
+
+2015-11-12 Marek 'marx' Grac <mgrac at redhat.com>
+
+ refactor login
+
+2015-11-09 Marek 'marx' Grac <mgrac at redhat.com>
+
+ it is working: apc, lpar4, blade, brocade
+
+ working LPAR
+
+2015-11-05 Marek 'marx' Grac <mgrac at redhat.com>
+
+ simplify
+
+ autodetect: simplify
+
+ Autodetect init
+
2015-11-04 Marek 'marx' Grac <mgrac at redhat.com>
fencing: Log when cmd-line argument is not used
diff --git a/Makefile.in b/Makefile.in
index 63cfa89..671edd2 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -280,6 +280,11 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SBD_PATH = @SBD_PATH@
SED = @SED@
@@ -339,9 +344,13 @@ mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
diff --git a/aclocal.m4 b/aclocal.m4
index 541e23c..2fa9b1c 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -812,6 +812,241 @@ AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+# ---------------------------------------------------------------------------
+# Adds support for distributing Python modules and packages. To
+# install modules, copy them to $(pythondir), using the python_PYTHON
+# automake variable. To install a package with the same name as the
+# automake package, install to $(pkgpythondir), or use the
+# pkgpython_PYTHON automake variable.
+#
+# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
+# locations to install python extension modules (shared libraries).
+# Another macro is required to find the appropriate flags to compile
+# extension modules.
+#
+# If your package is configured with a different prefix to python,
+# users will have to add the install directory to the PYTHONPATH
+# environment variable, or create a .pth file (see the python
+# documentation for details).
+#
+# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
+# cause an error if the version of python installed on the system
+# doesn't meet the requirement. MINIMUM-VERSION should consist of
+# numbers and dots only.
+AC_DEFUN([AM_PATH_PYTHON],
+ [
+ dnl Find a Python interpreter. Python versions prior to 2.0 are not
+ dnl supported. (2.0 was released on October 16, 2000).
+ m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
+[python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
+ python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0])
+
+ AC_ARG_VAR([PYTHON], [the Python interpreter])
+
+ m4_if([$1],[],[
+ dnl No version check is needed.
+ # Find any Python interpreter.
+ if test -z "$PYTHON"; then
+ AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
+ fi
+ am_display_PYTHON=python
+ ], [
+ dnl A version check is needed.
+ if test -n "$PYTHON"; then
+ # If the user set $PYTHON, use it and don't search something else.
+ AC_MSG_CHECKING([whether $PYTHON version is >= $1])
+ AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
+ [AC_MSG_RESULT([yes])],
+ [AC_MSG_RESULT([no])
+ AC_MSG_ERROR([Python interpreter is too old])])
+ am_display_PYTHON=$PYTHON
+ else
+ # Otherwise, try each interpreter until we find one that satisfies
+ # VERSION.
+ AC_CACHE_CHECK([for a Python interpreter with version >= $1],
+ [am_cv_pathless_PYTHON],[
+ for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
+ test "$am_cv_pathless_PYTHON" = none && break
+ AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
+ done])
+ # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
+ if test "$am_cv_pathless_PYTHON" = none; then
+ PYTHON=:
+ else
+ AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
+ fi
+ am_display_PYTHON=$am_cv_pathless_PYTHON
+ fi
+ ])
+
+ if test "$PYTHON" = :; then
+ dnl Run any user-specified action, or abort.
+ m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
+ else
+
+ dnl Query Python for its version number. Getting [:3] seems to be
+ dnl the best way to do this; it's what "site.py" does in the standard
+ dnl library.
+
+ AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
+ [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
+ AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
+
+ dnl Use the values of $prefix and $exec_prefix for the corresponding
+ dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX. These are made
+ dnl distinct variables so they can be overridden if need be. However,
+ dnl general consensus is that you shouldn't need this ability.
+
+ AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
+ AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])
+
+ dnl At times (like when building shared libraries) you may want
+ dnl to know which OS platform Python thinks this is.
+
+ AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
+ [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
+ AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
+
+ # Just factor out some code duplication.
+ am_python_setup_sysconfig="\
+import sys
+# Prefer sysconfig over distutils.sysconfig, for better compatibility
+# with python 3.x. See automake bug#10227.
+try:
+ import sysconfig
+except ImportError:
+ can_use_sysconfig = 0
+else:
+ can_use_sysconfig = 1
+# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
+# <https://github.com/pypa/virtualenv/issues/118>
+try:
+ from platform import python_implementation
+ if python_implementation() == 'CPython' and sys.version[[:3]] == '2.7':
+ can_use_sysconfig = 0
+except ImportError:
+ pass"
+
+ dnl Set up 4 directories:
+
+ dnl pythondir -- where to install python scripts. This is the
+ dnl site-packages directory, not the python standard library
+ dnl directory like in previous automake betas. This behavior
+ dnl is more consistent with lispdir.m4 for example.
+ dnl Query distutils for this directory.
+ AC_CACHE_CHECK([for $am_display_PYTHON script directory],
+ [am_cv_python_pythondir],
+ [if test "x$prefix" = xNONE
+ then
+ am_py_prefix=$ac_default_prefix
+ else
+ am_py_prefix=$prefix
+ fi
+ am_cv_python_pythondir=`$PYTHON -c "
+$am_python_setup_sysconfig
+if can_use_sysconfig:
+ sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
+else:
+ from distutils import sysconfig
+ sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
+sys.stdout.write(sitedir)"`
+ case $am_cv_python_pythondir in
+ $am_py_prefix*)
+ am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
+ am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
+ ;;
+ *)
+ case $am_py_prefix in
+ /usr|/System*) ;;
+ *)
+ am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
+ ;;
+ esac
+ ;;
+ esac
+ ])
+ AC_SUBST([pythondir], [$am_cv_python_pythondir])
+
+ dnl pkgpythondir -- $PACKAGE directory under pythondir. Was
+ dnl PYTHON_SITE_PACKAGE in previous betas, but this naming is
+ dnl more consistent with the rest of automake.
+
+ AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
+
+ dnl pyexecdir -- directory for installing python extension modules
+ dnl (shared libraries)
+ dnl Query distutils for this directory.
+ AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
+ [am_cv_python_pyexecdir],
+ [if test "x$exec_prefix" = xNONE
+ then
+ am_py_exec_prefix=$am_py_prefix
+ else
+ am_py_exec_prefix=$exec_prefix
+ fi
+ am_cv_python_pyexecdir=`$PYTHON -c "
+$am_python_setup_sysconfig
+if can_use_sysconfig:
+ sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
+else:
+ from distutils import sysconfig
+ sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
+sys.stdout.write(sitedir)"`
+ case $am_cv_python_pyexecdir in
+ $am_py_exec_prefix*)
+ am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
+ am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
+ ;;
+ *)
+ case $am_py_exec_prefix in
+ /usr|/System*) ;;
+ *)
+ am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
+ ;;
+ esac
+ ;;
+ esac
+ ])
+ AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
+
+ dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
+
+ AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
+
+ dnl Run any user-specified action.
+ $2
+ fi
+
+])
+
+
+# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
+# ---------------------------------------------------------------------------
+# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
+# Run ACTION-IF-FALSE otherwise.
+# This test uses sys.hexversion instead of the string equivalent (first
+# word of sys.version), in order to cope with versions such as 2.2c1.
+# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).
+AC_DEFUN([AM_PYTHON_CHECK_VERSION],
+ [prog="import sys
+# split strings by '.' and convert to numeric. Append some zeros
+# because we need at least 4 digits for the hex conversion.
+# map returns an iterator in Python 3.0 and a list in 2.x
+minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
+minverhex = 0
+# xrange is not present in Python 3.0 and range returns an iterator
+for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
+sys.exit(sys.hexversion < minverhex)"
+ AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
+
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
diff --git a/configure b/configure
index 4cdf797..817d9c2 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for fence-agents 4.0.22.
+# Generated by GNU Autoconf 2.69 for fence-agents 4.0.23.
#
# Report bugs to <linux-cluster at redhat.com>.
#
@@ -590,8 +590,8 @@ MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='fence-agents'
PACKAGE_TARNAME='fence-agents'
-PACKAGE_VERSION='4.0.22'
-PACKAGE_STRING='fence-agents 4.0.22'
+PACKAGE_VERSION='4.0.23'
+PACKAGE_STRING='fence-agents 4.0.23'
PACKAGE_BUGREPORT='linux-cluster at redhat.com'
PACKAGE_URL=''
@@ -661,6 +661,15 @@ COROSYNC_CMAPCTL_PATH
GNUTLSCLI_PATH
AMTTOOL_PATH
IPMITOOL_PATH
+pkgpyexecdir
+pyexecdir
+pkgpythondir
+pythondir
+PYTHON_PLATFORM
+PYTHON_EXEC_PREFIX
+PYTHON_PREFIX
+PYTHON_VERSION
+PYTHON
LIBOBJS
CXXCPP
am__fastdepCXX_FALSE
@@ -811,7 +820,8 @@ CPP
CXX
CXXFLAGS
CCC
-CXXCPP'
+CXXCPP
+PYTHON'
# Initialize some variables set by options.
@@ -1352,7 +1362,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures fence-agents 4.0.22 to adapt to many kinds of systems.
+\`configure' configures fence-agents 4.0.23 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1422,7 +1432,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of fence-agents 4.0.22:";;
+ short | recursive ) echo "Configuration of fence-agents 4.0.23:";;
esac
cat <<\_ACEOF
@@ -1472,6 +1482,7 @@ Some influential environment variables:
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
+ PYTHON the Python interpreter
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -1539,7 +1550,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-fence-agents configure 4.0.22
+fence-agents configure 4.0.23
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2137,7 +2148,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by fence-agents $as_me 4.0.22, which was
+It was created by fence-agents $as_me 4.0.23, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -3001,7 +3012,7 @@ fi
# Define the identity of the package.
PACKAGE='fence-agents'
- VERSION='4.0.22'
+ VERSION='4.0.23'
cat >>confdefs.h <<_ACEOF
@@ -16803,7 +16814,7 @@ if test "x$AGENTS_LIST" != xall; then
fi
if test "x$AGENTS_LIST" = xall; then
- AGENTS_LIST=`find $srcdir/fence/agents -mindepth 2 -maxdepth 2 -name Makefile.am -printf '%h ' | sed -e 's#'$srcdir'/fence/agents/##g' -e 's#lib ##g' -e 's#nss_wrapper ##g'`
+ AGENTS_LIST=`find $srcdir/fence/agents -mindepth 2 -maxdepth 2 -name '*.py' -printf '%P ' | sed -e 's#lib/[A-Za-z_.]* ##g' -e 's#nss_wrapper/[A-Za-z_.]* ##g' -e 's#autodetect/[A-Za-z_.]* ##g'`
fi
XENAPILIB=0
@@ -16818,9 +16829,221 @@ CLUSTERVARRUN=${localstatedir}/run/cluster
CLUSTERDATA=${datadir}/cluster
+
+
+
+
+
+ # Find any Python interpreter.
+ if test -z "$PYTHON"; then
+ for ac_prog in python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PYTHON+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $PYTHON in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_PYTHON="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PYTHON=$ac_cv_path_PYTHON
+if test -n "$PYTHON"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PYTHON" >&5
+$as_echo "$PYTHON" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$PYTHON" && break
+done
+test -n "$PYTHON" || PYTHON=":"
+
+ fi
+ am_display_PYTHON=python
+
+
+ if test "$PYTHON" = :; then
+ as_fn_error $? "no suitable Python interpreter found" "$LINENO" 5
+ else
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON version" >&5
+$as_echo_n "checking for $am_display_PYTHON version... " >&6; }
+if ${am_cv_python_version+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[:3])"`
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_version" >&5
+$as_echo "$am_cv_python_version" >&6; }
+ PYTHON_VERSION=$am_cv_python_version
+
+
+
+ PYTHON_PREFIX='${prefix}'
+
+ PYTHON_EXEC_PREFIX='${exec_prefix}'
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON platform" >&5
+$as_echo_n "checking for $am_display_PYTHON platform... " >&6; }
+if ${am_cv_python_platform+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_platform" >&5
+$as_echo "$am_cv_python_platform" >&6; }
+ PYTHON_PLATFORM=$am_cv_python_platform
+
+
+ # Just factor out some code duplication.
+ am_python_setup_sysconfig="\
+import sys
+# Prefer sysconfig over distutils.sysconfig, for better compatibility
+# with python 3.x. See automake bug#10227.
+try:
+ import sysconfig
+except ImportError:
+ can_use_sysconfig = 0
+else:
+ can_use_sysconfig = 1
+# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
+# <https://github.com/pypa/virtualenv/issues/118>
+try:
+ from platform import python_implementation
+ if python_implementation() == 'CPython' and sys.version[:3] == '2.7':
+ can_use_sysconfig = 0
+except ImportError:
+ pass"
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON script directory" >&5
+$as_echo_n "checking for $am_display_PYTHON script directory... " >&6; }
+if ${am_cv_python_pythondir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$prefix" = xNONE
+ then
+ am_py_prefix=$ac_default_prefix
+ else
+ am_py_prefix=$prefix
+ fi
+ am_cv_python_pythondir=`$PYTHON -c "
+$am_python_setup_sysconfig
+if can_use_sysconfig:
+ sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
+else:
+ from distutils import sysconfig
+ sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
+sys.stdout.write(sitedir)"`
+ case $am_cv_python_pythondir in
+ $am_py_prefix*)
+ am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
+ am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
+ ;;
+ *)
+ case $am_py_prefix in
+ /usr|/System*) ;;
+ *)
+ am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
+ ;;
+ esac
+ ;;
+ esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_pythondir" >&5
+$as_echo "$am_cv_python_pythondir" >&6; }
+ pythondir=$am_cv_python_pythondir
+
+
+
+ pkgpythondir=\${pythondir}/$PACKAGE
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON extension module directory" >&5
+$as_echo_n "checking for $am_display_PYTHON extension module directory... " >&6; }
+if ${am_cv_python_pyexecdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$exec_prefix" = xNONE
+ then
+ am_py_exec_prefix=$am_py_prefix
+ else
+ am_py_exec_prefix=$exec_prefix
+ fi
+ am_cv_python_pyexecdir=`$PYTHON -c "
+$am_python_setup_sysconfig
+if can_use_sysconfig:
+ sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
+else:
+ from distutils import sysconfig
+ sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
+sys.stdout.write(sitedir)"`
+ case $am_cv_python_pyexecdir in
+ $am_py_exec_prefix*)
+ am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
+ am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
+ ;;
+ *)
+ case $am_py_exec_prefix in
+ /usr|/System*) ;;
+ *)
+ am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
+ ;;
+ esac
+ ;;
+ esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_pyexecdir" >&5
+$as_echo "$am_cv_python_pyexecdir" >&6; }
+ pyexecdir=$am_cv_python_pyexecdir
+
+
+
+ pkgpyexecdir=\${pyexecdir}/$PACKAGE
+
+
+
+ fi
+
+
+if test -z "$PYTHON"; then
+ echo "*** Essential program python not found" 1>&2
+ exit 1
+fi
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking python module: suds" >&5
$as_echo_n "checking python module: suds... " >&6; }
- python -c "import suds" 2>/dev/null
+ $PYTHON -c "import suds" 2>/dev/null
if test $? -eq 0;
then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -16841,7 +17064,7 @@ $as_echo "no" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking python module: pexpect" >&5
$as_echo_n "checking python module: pexpect... " >&6; }
- python -c "import pexpect" 2>/dev/null
+ $PYTHON -c "import pexpect" 2>/dev/null
if test $? -eq 0;
then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -16862,7 +17085,7 @@ $as_echo "no" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking python module: pycurl" >&5
$as_echo_n "checking python module: pycurl... " >&6; }
- python -c "import pycurl" 2>/dev/null
+ $PYTHON -c "import pycurl" 2>/dev/null
if test $? -eq 0;
then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -16883,7 +17106,7 @@ $as_echo "no" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking python module: requests" >&5
$as_echo_n "checking python module: requests... " >&6; }
- python -c "import requests" 2>/dev/null
+ $PYTHON -c "import requests" 2>/dev/null
if test $? -eq 0;
then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -16902,6 +17125,27 @@ $as_echo "no" >&6; }
fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking python module: pywsman" >&5
+$as_echo_n "checking python module: pywsman... " >&6; }
+ $PYTHON -c "import pywsman" 2>/dev/null
+ if test $? -eq 0;
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ eval HAVE_PYMOD_PYWSMAN=yes
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ eval HAVE_PYMOD_PYWSMAN=no
+ #
+ if test -n "1"
+ then
+ as_fn_error $? "failed to find required module pywsman" "$LINENO" 5
+ exit 1
+ fi
+ fi
+
+
## path to 3rd-party binaries
# Extract the first word of "ipmitool", so it can be a program name with args.
set dummy ipmitool; ac_word=$2
@@ -17712,7 +17956,7 @@ CPPFLAGS="-I\$(top_builddir)/make -I\$(top_srcdir)/make -I. $ENV_CPPFLAGS"
LDFLAGS="$ENV_LDFLAGS"
-ac_config_files="$ac_config_files Makefile fence/Makefile fence/agents/Makefile fence/agents/alom/Makefile fence/agents/apc/Makefile fence/agents/apc_snmp/Makefile fence/agents/amt/Makefile fence/agents/bladecenter/Makefile fence/agents/brocade/Makefile fence/agents/cisco_mds/Makefile fence/agents/cisco_ucs/Makefile fence/agents/compute/Makefile fence/agents/docker/Makefile fence/agents/drac/Makefile fence/agents/drac5/Makefile fence/agents/dummy/Makefile fence/agents/eaton_snmp/Makefile [...]
+ac_config_files="$ac_config_files Makefile fence/Makefile fence/agents/Makefile fence/agents/lib/Makefile doc/Makefile"
cat >confcache <<\_ACEOF
@@ -18257,7 +18501,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by fence-agents $as_me 4.0.22, which was
+This file was extended by fence-agents $as_me 4.0.23, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -18323,7 +18567,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-fence-agents config.status 4.0.22
+fence-agents config.status 4.0.23
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
@@ -18833,57 +19077,7 @@ do
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"fence/Makefile") CONFIG_FILES="$CONFIG_FILES fence/Makefile" ;;
"fence/agents/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/Makefile" ;;
- "fence/agents/alom/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/alom/Makefile" ;;
- "fence/agents/apc/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/apc/Makefile" ;;
- "fence/agents/apc_snmp/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/apc_snmp/Makefile" ;;
- "fence/agents/amt/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/amt/Makefile" ;;
- "fence/agents/bladecenter/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/bladecenter/Makefile" ;;
- "fence/agents/brocade/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/brocade/Makefile" ;;
- "fence/agents/cisco_mds/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/cisco_mds/Makefile" ;;
- "fence/agents/cisco_ucs/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/cisco_ucs/Makefile" ;;
- "fence/agents/compute/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/compute/Makefile" ;;
- "fence/agents/docker/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/docker/Makefile" ;;
- "fence/agents/drac/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/drac/Makefile" ;;
- "fence/agents/drac5/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/drac5/Makefile" ;;
- "fence/agents/dummy/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/dummy/Makefile" ;;
- "fence/agents/eaton_snmp/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/eaton_snmp/Makefile" ;;
- "fence/agents/emerson/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/emerson/Makefile" ;;
- "fence/agents/eps/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/eps/Makefile" ;;
- "fence/agents/hpblade/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/hpblade/Makefile" ;;
- "fence/agents/ibmblade/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ibmblade/Makefile" ;;
- "fence/agents/ipdu/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ipdu/Makefile" ;;
- "fence/agents/ifmib/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ifmib/Makefile" ;;
- "fence/agents/ilo/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ilo/Makefile" ;;
- "fence/agents/ilo_moonshot/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ilo_moonshot/Makefile" ;;
- "fence/agents/ilo_mp/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ilo_mp/Makefile" ;;
- "fence/agents/ilo_ssh/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ilo_ssh/Makefile" ;;
- "fence/agents/intelmodular/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/intelmodular/Makefile" ;;
- "fence/agents/ipmilan/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ipmilan/Makefile" ;;
- "fence/agents/kdump/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/kdump/Makefile" ;;
- "fence/agents/ldom/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ldom/Makefile" ;;
"fence/agents/lib/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/lib/Makefile" ;;
- "fence/agents/lpar/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/lpar/Makefile" ;;
- "fence/agents/manual/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/manual/Makefile" ;;
- "fence/agents/mpath/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/mpath/Makefile" ;;
- "fence/agents/netio/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/netio/Makefile" ;;
- "fence/agents/ovh/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/ovh/Makefile" ;;
- "fence/agents/pve/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/pve/Makefile" ;;
- "fence/agents/raritan/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/raritan/Makefile" ;;
- "fence/agents/rcd_serial/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/rcd_serial/Makefile" ;;
- "fence/agents/rhevm/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/rhevm/Makefile" ;;
- "fence/agents/rsa/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/rsa/Makefile" ;;
- "fence/agents/rsb/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/rsb/Makefile" ;;
- "fence/agents/sbd/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/sbd/Makefile" ;;
- "fence/agents/sanbox2/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/sanbox2/Makefile" ;;
- "fence/agents/scsi/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/scsi/Makefile" ;;
- "fence/agents/vbox/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/vbox/Makefile" ;;
- "fence/agents/virsh/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/virsh/Makefile" ;;
- "fence/agents/vmware/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/vmware/Makefile" ;;
- "fence/agents/vmware_soap/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/vmware_soap/Makefile" ;;
- "fence/agents/wti/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/wti/Makefile" ;;
- "fence/agents/xenapi/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/xenapi/Makefile" ;;
- "fence/agents/hds_cb/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/hds_cb/Makefile" ;;
- "fence/agents/zvm/Makefile") CONFIG_FILES="$CONFIG_FILES fence/agents/zvm/Makefile" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
diff --git a/configure.ac b/configure.ac
index 0a5eb36..570bfa8 100644
--- a/configure.ac
+++ b/configure.ac
@@ -6,7 +6,7 @@ AC_INIT([fence-agents],
m4_esyscmd([make/git-version-gen .tarball-version]),
[linux-cluster at redhat.com])
-AM_INIT_AUTOMAKE([-Wno-portability dist-bzip2 dist-xz])
+AM_INIT_AUTOMAKE([-Wno-portability dist-bzip2 dist-xz subdir-objects])
LT_PREREQ([2.2.6])
LT_INIT
@@ -139,7 +139,7 @@ if test "x$AGENTS_LIST" != xall; then
fi
if test "x$AGENTS_LIST" = xall; then
- AGENTS_LIST=`find $srcdir/fence/agents -mindepth 2 -maxdepth 2 -name Makefile.am -printf '%h ' | sed -e 's#'$srcdir'/fence/agents/##g' -e 's#lib ##g' -e 's#nss_wrapper ##g'`
+ AGENTS_LIST=`find $srcdir/fence/agents -mindepth 2 -maxdepth 2 -name '*.py' -printf '%P ' | sed -e 's#lib/[A-Za-z_.]* ##g' -e 's#nss_wrapper/[A-Za-z_.]* ##g' -e 's#autodetect/[A-Za-z_.]* ##g'`
fi
XENAPILIB=0
@@ -153,10 +153,17 @@ LOGDIR=${localstatedir}/log/cluster
CLUSTERVARRUN=${localstatedir}/run/cluster
CLUSTERDATA=${datadir}/cluster
+AM_PATH_PYTHON
+if test -z "$PYTHON"; then
+ echo "*** Essential program python not found" 1>&2
+ exit 1
+fi
+
AC_PYTHON_MODULE(suds, 1)
AC_PYTHON_MODULE(pexpect, 1)
AC_PYTHON_MODULE(pycurl, 1)
AC_PYTHON_MODULE(requests, 1)
+AC_PYTHON_MODULE(pywsman, 1)
## path to 3rd-party binaries
AC_PATH_PROG([IPMITOOL_PATH], [ipmitool], [/usr/bin/ipmitool])
@@ -268,57 +275,7 @@ LDFLAGS="$ENV_LDFLAGS"
AC_CONFIG_FILES([Makefile
fence/Makefile
fence/agents/Makefile
- fence/agents/alom/Makefile
- fence/agents/apc/Makefile
- fence/agents/apc_snmp/Makefile
- fence/agents/amt/Makefile
- fence/agents/bladecenter/Makefile
- fence/agents/brocade/Makefile
- fence/agents/cisco_mds/Makefile
- fence/agents/cisco_ucs/Makefile
- fence/agents/compute/Makefile
- fence/agents/docker/Makefile
- fence/agents/drac/Makefile
- fence/agents/drac5/Makefile
- fence/agents/dummy/Makefile
- fence/agents/eaton_snmp/Makefile
- fence/agents/emerson/Makefile
- fence/agents/eps/Makefile
- fence/agents/hpblade/Makefile
- fence/agents/ibmblade/Makefile
- fence/agents/ipdu/Makefile
- fence/agents/ifmib/Makefile
- fence/agents/ilo/Makefile
- fence/agents/ilo_moonshot/Makefile
- fence/agents/ilo_mp/Makefile
- fence/agents/ilo_ssh/Makefile
- fence/agents/intelmodular/Makefile
- fence/agents/ipmilan/Makefile
- fence/agents/kdump/Makefile
- fence/agents/ldom/Makefile
fence/agents/lib/Makefile
- fence/agents/lpar/Makefile
- fence/agents/manual/Makefile
- fence/agents/mpath/Makefile
- fence/agents/netio/Makefile
- fence/agents/ovh/Makefile
- fence/agents/pve/Makefile
- fence/agents/raritan/Makefile
- fence/agents/rcd_serial/Makefile
- fence/agents/rhevm/Makefile
- fence/agents/rsa/Makefile
- fence/agents/rsb/Makefile
- fence/agents/sbd/Makefile
- fence/agents/sanbox2/Makefile
- fence/agents/scsi/Makefile
- fence/agents/vbox/Makefile
- fence/agents/virsh/Makefile
- fence/agents/vmware/Makefile
- fence/agents/vmware_soap/Makefile
- fence/agents/wti/Makefile
- fence/agents/xenapi/Makefile
- fence/agents/hds_cb/Makefile
- fence/agents/zvm/Makefile
doc/Makefile])
AC_OUTPUT
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 562e40e..9674599 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -227,6 +227,11 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SBD_PATH = @SBD_PATH@
SED = @SED@
@@ -286,9 +291,13 @@ mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
diff --git a/fence/Makefile.in b/fence/Makefile.in
index 4730b3e..3306ec7 100644
--- a/fence/Makefile.in
+++ b/fence/Makefile.in
@@ -256,6 +256,11 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SBD_PATH = @SBD_PATH@
SED = @SED@
@@ -315,9 +320,13 @@ mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
diff --git a/fence/agents/Makefile.am b/fence/agents/Makefile.am
index 3b76b9a..3b276b8 100644
--- a/fence/agents/Makefile.am
+++ b/fence/agents/Makefile.am
@@ -1,3 +1,85 @@
-MAINTAINERCLEANFILES = Makefile.in
+MAINTAINERCLEANFILES = Makefile.in
-SUBDIRS = $(AGENTS_LIST)
+TARGET = $(AGENTS_LIST:%.py=%)
+
+SRC = $(TARGET:=.py)
+
+CLEAN_TARGET_ADDITIONAL = kdump/fence_kdump_send manual/fence_ack_manual
+
+EXTRA_DIST = $(SRC) manual/fence_ack_manual.in manual/fence_ack_manual.8
+
+sbin_SCRIPTS = $(TARGET) manual/fence_ack_manual
+
+EXTRA_SCRIPTS =
+
+man_MANS = $(sbin_SCRIPTS:=.8)
+
+sbin_PROGRAMS = kdump/fence_kdump zvm/fence_zvm
+libexec_PROGRAMS = kdump/fence_kdump_send
+
+noinst_HEADERS = kdump/list.h kdump/message.h kdump/options.h kdump/version.h
+
+kdump_fence_kdump_SOURCES = kdump/fence_kdump.c
+kdump_fence_kdump_CFLAGS = -D_GNU_SOURCE -Ikdump
+
+kdump_fence_kdump_send_SOURCES = kdump/fence_kdump_send.c
+kdump_fence_kdump_send_CFLAGS = -D_GNU_SOURCE -Ikdump
+
+dist_man_MANS = kdump/fence_kdump.8 kdump/fence_kdump_send.8
+
+scsidatadir = $(CLUSTERDATA)
+scsidata_SCRIPTS = scsi/fence_scsi_check scsi/fence_scsi_check_hardreboot
+
+zvm_fence_zvm_SOURCES = zvm/fence_zvm.c
+zvm_fence_zvm_CFLAGS = -D_GNU_SOURCE
+
+FENCE_TEST_ARGS = \
+login=test\n\
+passwd=test\n\
+ipaddr=test\n\
+port=1\n\
+managed=1\n\
+devices=test\n\
+session_url=http://test\n\
+email=test at test.te
+
+manual/fence_ack_manual: manual/fence_ack_manual.in
+ mkdir -p $(@D)
+ cat $^ | sed \
+ -e 's#@clustervarrun@#${CLUSTERVARRUN}#g' \
+ > $@
+
+scsi/fence_scsi_check: scsi/fence_scsi
+ cp $^ $@
+
+scsi/fence_scsi_check_hardreboot: scsi/fence_scsi
+ cp $^ $@
+
+kdump/fence_kdump.8: kdump/fence_kdump $(top_srcdir)/fence/agents/lib/fence2man.xsl
+ set -e && \
+ ./$(@:%.8=%) -o metadata > $(@D)/.$(@F).tmp && \
+ xmllint --noout --relaxng $(top_srcdir)/fence/agents/lib/metadata.rng $(@D)/.$(@F).tmp && \
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl $(@D)/.$(@F).tmp > $@
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl $(@D)/.$(@F).tmp | grep -v '<?xml' > $(@D)/$(@F:%.8=%.wiki)
+
+kdump/fence_kdump_send.8:
+ true
+
+manual/fence_ack_manual.8:
+ true
+
+zvm/fence_zvm.8: zvm/fence_zvm
+ cp $(top_srcdir)/fence/agents/zvm/fence_zvm_man_page $(@D)/fence_zvm.8
+
+cisco_mds/fence_cisco_mds.delay-check: cisco_mds/fence_cisco_mds
+ $(eval INPUT=$(subst .delay-check,,$@))
+ FENCE_TEST_ARGS_CISCO_MDS=$$(/bin/echo -e '$(FENCE_TEST_ARGS)' | sed 's#port=1#port=fc1/1#'); \
+ test `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e 'delay=10\n $$FENCE_TEST_ARGS_CISCO_MDS' | $(PYTHON) ./$(INPUT)" 2>&1 |\
+ sed 's/\.//' | tail -n 1` -ge 1000 || ( \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e "delay=0\n $$FENCE_TEST_ARGS_CISCO_MDS" | $(PYTHON) ./$(INPUT)"; false )
+
+include $(top_srcdir)/make/fencebuild.mk
+include $(top_srcdir)/make/fenceman.mk
+include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/Makefile.in b/fence/agents/Makefile.in
index 48f16b4..5e59885 100644
--- a/fence/agents/Makefile.in
+++ b/fence/agents/Makefile.in
@@ -13,6 +13,9 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
+
+
+
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
@@ -87,6 +90,8 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
+sbin_PROGRAMS = kdump/fence_kdump$(EXEEXT) zvm/fence_zvm$(EXEEXT)
+libexec_PROGRAMS = kdump/fence_kdump_send$(EXEEXT)
subdir = fence/agents
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
@@ -96,11 +101,71 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
+ $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" \
+ "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(scsidatadir)" \
+ "$(DESTDIR)$(man8dir)"
+PROGRAMS = $(libexec_PROGRAMS) $(sbin_PROGRAMS)
+am__dirstamp = $(am__leading_dot)dirstamp
+am_kdump_fence_kdump_OBJECTS = \
+ kdump/kdump_fence_kdump-fence_kdump.$(OBJEXT)
+kdump_fence_kdump_OBJECTS = $(am_kdump_fence_kdump_OBJECTS)
+kdump_fence_kdump_LDADD = $(LDADD)
+AM_V_lt = $(am__v_lt_ at AM_V@)
+am__v_lt_ = $(am__v_lt_ at AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+kdump_fence_kdump_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+ $(kdump_fence_kdump_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
+am_kdump_fence_kdump_send_OBJECTS = \
+ kdump/kdump_fence_kdump_send-fence_kdump_send.$(OBJEXT)
+kdump_fence_kdump_send_OBJECTS = $(am_kdump_fence_kdump_send_OBJECTS)
+kdump_fence_kdump_send_LDADD = $(LDADD)
+kdump_fence_kdump_send_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+ $(kdump_fence_kdump_send_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+am_zvm_fence_zvm_OBJECTS = zvm/zvm_fence_zvm-fence_zvm.$(OBJEXT)
+zvm_fence_zvm_OBJECTS = $(am_zvm_fence_zvm_OBJECTS)
+zvm_fence_zvm_LDADD = $(LDADD)
+zvm_fence_zvm_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(zvm_fence_zvm_CFLAGS) \
+ $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+SCRIPTS = $(sbin_SCRIPTS) $(scsidata_SCRIPTS)
AM_V_P = $(am__v_P_ at AM_V@)
am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
am__v_P_0 = false
@@ -113,29 +178,41 @@ AM_V_at = $(am__v_at_ at AM_V@)
am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
+DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/make
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_ at AM_V@)
+am__v_CC_ = $(am__v_CC_ at AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_ at AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_ at AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(kdump_fence_kdump_SOURCES) \
+ $(kdump_fence_kdump_send_SOURCES) $(zvm_fence_zvm_SOURCES)
+DIST_SOURCES = $(kdump_fence_kdump_SOURCES) \
+ $(kdump_fence_kdump_send_SOURCES) $(zvm_fence_zvm_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(dist_man_MANS) $(man_MANS)
+HEADERS = $(noinst_HEADERS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
@@ -155,34 +232,11 @@ am__define_uniq_tagged_files = \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-am__DIST_COMMON = $(srcdir)/Makefile.in
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp $(top_srcdir)/make/agentpycheck.mk \
+ $(top_srcdir)/make/fencebuild.mk \
+ $(top_srcdir)/make/fenceman.mk
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AGENTS_LIST = @AGENTS_LIST@
AMTAR = @AMTAR@
@@ -256,6 +310,11 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SBD_PATH = @SBD_PATH@
SED = @SED@
@@ -315,9 +374,13 @@ mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@@ -327,11 +390,41 @@ top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
MAINTAINERCLEANFILES = Makefile.in
-SUBDIRS = $(AGENTS_LIST)
-all: all-recursive
+TARGET = $(AGENTS_LIST:%.py=%)
+SRC = $(TARGET:=.py)
+CLEAN_TARGET_ADDITIONAL = kdump/fence_kdump_send manual/fence_ack_manual
+EXTRA_DIST = $(SRC) manual/fence_ack_manual.in manual/fence_ack_manual.8
+sbin_SCRIPTS = $(TARGET) manual/fence_ack_manual
+EXTRA_SCRIPTS =
+man_MANS = $(sbin_SCRIPTS:=.8)
+noinst_HEADERS = kdump/list.h kdump/message.h kdump/options.h kdump/version.h
+kdump_fence_kdump_SOURCES = kdump/fence_kdump.c
+kdump_fence_kdump_CFLAGS = -D_GNU_SOURCE -Ikdump
+kdump_fence_kdump_send_SOURCES = kdump/fence_kdump_send.c
+kdump_fence_kdump_send_CFLAGS = -D_GNU_SOURCE -Ikdump
+dist_man_MANS = kdump/fence_kdump.8 kdump/fence_kdump_send.8
+scsidatadir = $(CLUSTERDATA)
+scsidata_SCRIPTS = scsi/fence_scsi_check scsi/fence_scsi_check_hardreboot
+zvm_fence_zvm_SOURCES = zvm/fence_zvm.c
+zvm_fence_zvm_CFLAGS = -D_GNU_SOURCE
+FENCE_TEST_ARGS = \
+login=test\n\
+passwd=test\n\
+ipaddr=test\n\
+port=1\n\
+managed=1\n\
+devices=test\n\
+session_url=http://test\n\
+email=test at test.te
+
+DATADIR := $(abs_top_srcdir)/tests/data/metadata
+AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
+TEST_TARGET = $(filter-out $(TEST_TARGET_SKIP),$(TARGET))
+all: all-am
.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@@ -351,6 +444,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
+$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -360,68 +454,342 @@ $(top_srcdir)/configure: $(am__configure_deps)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
+install-libexecPROGRAMS: $(libexec_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p \
+ || test -f $$p1 \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-libexecPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
+
+clean-libexecPROGRAMS:
+ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p \
+ || test -f $$p1 \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+kdump/$(am__dirstamp):
+ @$(MKDIR_P) kdump
+ @: > kdump/$(am__dirstamp)
+kdump/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) kdump/$(DEPDIR)
+ @: > kdump/$(DEPDIR)/$(am__dirstamp)
+kdump/kdump_fence_kdump-fence_kdump.$(OBJEXT): kdump/$(am__dirstamp) \
+ kdump/$(DEPDIR)/$(am__dirstamp)
+
+kdump/fence_kdump$(EXEEXT): $(kdump_fence_kdump_OBJECTS) $(kdump_fence_kdump_DEPENDENCIES) $(EXTRA_kdump_fence_kdump_DEPENDENCIES) kdump/$(am__dirstamp)
+ @rm -f kdump/fence_kdump$(EXEEXT)
+ $(AM_V_CCLD)$(kdump_fence_kdump_LINK) $(kdump_fence_kdump_OBJECTS) $(kdump_fence_kdump_LDADD) $(LIBS)
+kdump/kdump_fence_kdump_send-fence_kdump_send.$(OBJEXT): \
+ kdump/$(am__dirstamp) kdump/$(DEPDIR)/$(am__dirstamp)
+
+kdump/fence_kdump_send$(EXEEXT): $(kdump_fence_kdump_send_OBJECTS) $(kdump_fence_kdump_send_DEPENDENCIES) $(EXTRA_kdump_fence_kdump_send_DEPENDENCIES) kdump/$(am__dirstamp)
+ @rm -f kdump/fence_kdump_send$(EXEEXT)
+ $(AM_V_CCLD)$(kdump_fence_kdump_send_LINK) $(kdump_fence_kdump_send_OBJECTS) $(kdump_fence_kdump_send_LDADD) $(LIBS)
+zvm/$(am__dirstamp):
+ @$(MKDIR_P) zvm
+ @: > zvm/$(am__dirstamp)
+zvm/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) zvm/$(DEPDIR)
+ @: > zvm/$(DEPDIR)/$(am__dirstamp)
+zvm/zvm_fence_zvm-fence_zvm.$(OBJEXT): zvm/$(am__dirstamp) \
+ zvm/$(DEPDIR)/$(am__dirstamp)
+
+zvm/fence_zvm$(EXEEXT): $(zvm_fence_zvm_OBJECTS) $(zvm_fence_zvm_DEPENDENCIES) $(EXTRA_zvm_fence_zvm_DEPENDENCIES) zvm/$(am__dirstamp)
+ @rm -f zvm/fence_zvm$(EXEEXT)
+ $(AM_V_CCLD)$(zvm_fence_zvm_LINK) $(zvm_fence_zvm_OBJECTS) $(zvm_fence_zvm_LDADD) $(LIBS)
+install-sbinSCRIPTS: $(sbin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
+install-scsidataSCRIPTS: $(scsidata_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ @list='$(scsidata_SCRIPTS)'; test -n "$(scsidatadir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(scsidatadir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(scsidatadir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scsidatadir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scsidatadir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-scsidataSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(scsidata_SCRIPTS)'; test -n "$(scsidatadir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ dir='$(DESTDIR)$(scsidatadir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+ -rm -f kdump/*.$(OBJEXT)
+ -rm -f zvm/*.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+ at am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+ at am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+ at am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+kdump/kdump_fence_kdump-fence_kdump.o: kdump/fence_kdump.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_CFLAGS) $(CFLAGS) -MT kdump/kdump_fence_kdump-fence_kdump.o -MD -MP -MF kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Tpo -c -o kdump/kdump_fence_kdump-fence_kdump.o `test -f 'kdump/fence_kdump.c' || echo '$(srcdir)/'`kdump/fence_kdump.c
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Tpo kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='kdump/fence_kdump.c' object='kdump/kdump_fence_kdump-fence_kdump.o' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_CFLAGS) $(CFLAGS) -c -o kdump/kdump_fence_kdump-fence_kdump.o `test -f 'kdump/fence_kdump.c' || echo '$(srcdir)/'`kdump/fence_kdump.c
+
+kdump/kdump_fence_kdump-fence_kdump.obj: kdump/fence_kdump.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_CFLAGS) $(CFLAGS) -MT kdump/kdump_fence_kdump-fence_kdump.obj -MD -MP -MF kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Tpo -c -o kdump/kdump_fence_kdump-fence_kdump.obj `if test -f 'kdump/fence_kdump.c'; then $(CYGPATH_W) 'kdump/fence_kdump.c'; else $(CYGPATH_W) '$(srcdir)/kdump/fence_kdump.c'; fi`
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Tpo kdump/$(DEPDIR)/kdump_fence_kdump-fence_kdump.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='kdump/fence_kdump.c' object='kdump/kdump_fence_kdump-fence_kdump.obj' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_CFLAGS) $(CFLAGS) -c -o kdump/kdump_fence_kdump-fence_kdump.obj `if test -f 'kdump/fence_kdump.c'; then $(CYGPATH_W) 'kdump/fence_kdump.c'; else $(CYGPATH_W) '$(srcdir)/kdump/fence_kdump.c'; fi`
+
+kdump/kdump_fence_kdump_send-fence_kdump_send.o: kdump/fence_kdump_send.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_send_CFLAGS) $(CFLAGS) -MT kdump/kdump_fence_kdump_send-fence_kdump_send.o -MD -MP -MF kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Tpo -c -o kdump/kdump_fence_kdump_send-fence_kdump_send.o `test -f 'kdump/fence_kdump_send.c' || echo '$(srcdir)/'`kdump/fence_kdump_send.c
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Tpo kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='kdump/fence_kdump_send.c' object='kdump/kdump_fence_kdump_send-fence_kdump_send.o' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_send_CFLAGS) $(CFLAGS) -c -o kdump/kdump_fence_kdump_send-fence_kdump_send.o `test -f 'kdump/fence_kdump_send.c' || echo '$(srcdir)/'`kdump/fence_kdump_send.c
+
+kdump/kdump_fence_kdump_send-fence_kdump_send.obj: kdump/fence_kdump_send.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_send_CFLAGS) $(CFLAGS) -MT kdump/kdump_fence_kdump_send-fence_kdump_send.obj -MD -MP -MF kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Tpo -c -o kdump/kdump_fence_kdump_send-fence_kdump_send.obj `if test -f 'kdump/fence_kdump_send.c'; then $(CYGPATH_W) 'kdump/fence_kdump_send.c'; else $(CYGPATH_W) '$(srcdir)/kdump/fence_kdump_send.c'; fi`
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Tpo kdump/$(DEPDIR)/kdump_fence_kdump_send-fence_kdump_send.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='kdump/fence_kdump_send.c' object='kdump/kdump_fence_kdump_send-fence_kdump_send.obj' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kdump_fence_kdump_send_CFLAGS) $(CFLAGS) -c -o kdump/kdump_fence_kdump_send-fence_kdump_send.obj `if test -f 'kdump/fence_kdump_send.c'; then $(CYGPATH_W) 'kdump/fence_kdump_send.c'; else $(CYGPATH_W) '$(srcdir)/kdump/fence_kdump_send.c'; fi`
+
+zvm/zvm_fence_zvm-fence_zvm.o: zvm/fence_zvm.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zvm_fence_zvm_CFLAGS) $(CFLAGS) -MT zvm/zvm_fence_zvm-fence_zvm.o -MD -MP -MF zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Tpo -c -o zvm/zvm_fence_zvm-fence_zvm.o `test -f 'zvm/fence_zvm.c' || echo '$(srcdir)/'`zvm/fence_zvm.c
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Tpo zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='zvm/fence_zvm.c' object='zvm/zvm_fence_zvm-fence_zvm.o' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zvm_fence_zvm_CFLAGS) $(CFLAGS) -c -o zvm/zvm_fence_zvm-fence_zvm.o `test -f 'zvm/fence_zvm.c' || echo '$(srcdir)/'`zvm/fence_zvm.c
+
+zvm/zvm_fence_zvm-fence_zvm.obj: zvm/fence_zvm.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zvm_fence_zvm_CFLAGS) $(CFLAGS) -MT zvm/zvm_fence_zvm-fence_zvm.obj -MD -MP -MF zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Tpo -c -o zvm/zvm_fence_zvm-fence_zvm.obj `if test -f 'zvm/fence_zvm.c'; then $(CYGPATH_W) 'zvm/fence_zvm.c'; else $(CYGPATH_W) '$(srcdir)/zvm/fence_zvm.c'; fi`
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Tpo zvm/$(DEPDIR)/zvm_fence_zvm-fence_zvm.Po
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='zvm/fence_zvm.c' object='zvm/zvm_fence_zvm-fence_zvm.obj' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zvm_fence_zvm_CFLAGS) $(CFLAGS) -c -o zvm/zvm_fence_zvm-fence_zvm.obj `if test -f 'zvm/fence_zvm.c'; then $(CYGPATH_W) 'zvm/fence_zvm.c'; else $(CYGPATH_W) '$(srcdir)/zvm/fence_zvm.c'; fi`
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
+ -rm -rf kdump/.libs kdump/_libs
+ -rm -rf zvm/.libs zvm/_libs
+install-man8: $(dist_man_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(dist_man_MANS) $(man_MANS)'; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS) $(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.8[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
+tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
@@ -434,7 +802,7 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$$unique; \
fi; \
fi
-ctags: ctags-recursive
+ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
@@ -447,7 +815,7 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
+cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
@@ -496,45 +864,22 @@ distdir: $(DISTFILES)
|| exit 1; \
fi; \
done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
+check: check-am
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS) $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(scsidatadir)" "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-installcheck: installcheck-recursive
+installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
@@ -552,95 +897,246 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f kdump/$(DEPDIR)/$(am__dirstamp)
+ -rm -f kdump/$(am__dirstamp)
+ -rm -f zvm/$(DEPDIR)/$(am__dirstamp)
+ -rm -f zvm/$(am__dirstamp)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
+clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \
+ clean-local clean-sbinPROGRAMS mostlyclean-am
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
+distclean: distclean-am
+ -rm -rf kdump/$(DEPDIR) zvm/$(DEPDIR)
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
-dvi: dvi-recursive
+dvi: dvi-am
dvi-am:
-html: html-recursive
+html: html-am
html-am:
-info: info-recursive
+info: info-am
info-am:
-install-data-am:
+install-data-am: install-man install-scsidataSCRIPTS
-install-dvi: install-dvi-recursive
+install-dvi: install-dvi-am
install-dvi-am:
-install-exec-am:
+install-exec-am: install-libexecPROGRAMS install-sbinPROGRAMS \
+ install-sbinSCRIPTS
-install-html: install-html-recursive
+install-html: install-html-am
install-html-am:
-install-info: install-info-recursive
+install-info: install-info-am
install-info-am:
-install-man:
+install-man: install-man8
-install-pdf: install-pdf-recursive
+install-pdf: install-pdf-am
install-pdf-am:
-install-ps: install-ps-recursive
+install-ps: install-ps-am
install-ps-am:
installcheck-am:
-maintainer-clean: maintainer-clean-recursive
+maintainer-clean: maintainer-clean-am
+ -rm -rf kdump/$(DEPDIR) zvm/$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
-mostlyclean: mostlyclean-recursive
+mostlyclean: mostlyclean-am
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
-pdf: pdf-recursive
+pdf: pdf-am
pdf-am:
-ps: ps-recursive
+ps: ps-am
ps-am:
-uninstall-am:
+uninstall-am: uninstall-libexecPROGRAMS uninstall-man \
+ uninstall-sbinPROGRAMS uninstall-sbinSCRIPTS \
+ uninstall-scsidataSCRIPTS
+
+uninstall-man: uninstall-man8
-.MAKE: $(am__recursive_targets) install-am install-strip
+.MAKE: install-am install-strip
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
- check-am clean clean-generic clean-libtool cscopelist-am ctags \
- ctags-am distclean distclean-generic distclean-libtool \
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+ clean-libexecPROGRAMS clean-libtool clean-local \
+ clean-sbinPROGRAMS cscopelist-am ctags ctags-am distclean \
+ distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am tags tags-am uninstall uninstall-am
+ install-html-am install-info install-info-am \
+ install-libexecPROGRAMS install-man install-man8 install-pdf \
+ install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
+ install-sbinSCRIPTS install-scsidataSCRIPTS install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am uninstall-libexecPROGRAMS \
+ uninstall-man uninstall-man8 uninstall-sbinPROGRAMS \
+ uninstall-sbinSCRIPTS uninstall-scsidataSCRIPTS
.PRECIOUS: Makefile
+manual/fence_ack_manual: manual/fence_ack_manual.in
+ mkdir -p $(@D)
+ cat $^ | sed \
+ -e 's#@clustervarrun@#${CLUSTERVARRUN}#g' \
+ > $@
+
+scsi/fence_scsi_check: scsi/fence_scsi
+ cp $^ $@
+
+scsi/fence_scsi_check_hardreboot: scsi/fence_scsi
+ cp $^ $@
+
+kdump/fence_kdump.8: kdump/fence_kdump $(top_srcdir)/fence/agents/lib/fence2man.xsl
+ set -e && \
+ ./$(@:%.8=%) -o metadata > $(@D)/.$(@F).tmp && \
+ xmllint --noout --relaxng $(top_srcdir)/fence/agents/lib/metadata.rng $(@D)/.$(@F).tmp && \
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl $(@D)/.$(@F).tmp > $@
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl $(@D)/.$(@F).tmp | grep -v '<?xml' > $(@D)/$(@F:%.8=%.wiki)
+
+kdump/fence_kdump_send.8:
+ true
+
+manual/fence_ack_manual.8:
+ true
+
+zvm/fence_zvm.8: zvm/fence_zvm
+ cp $(top_srcdir)/fence/agents/zvm/fence_zvm_man_page $(@D)/fence_zvm.8
+
+cisco_mds/fence_cisco_mds.delay-check: cisco_mds/fence_cisco_mds
+ $(eval INPUT=$(subst .delay-check,,$@))
+ FENCE_TEST_ARGS_CISCO_MDS=$$(/bin/echo -e '$(FENCE_TEST_ARGS)' | sed 's#port=1#port=fc1/1#'); \
+ test `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e 'delay=10\n $$FENCE_TEST_ARGS_CISCO_MDS' | $(PYTHON) ./$(INPUT)" 2>&1 |\
+ sed 's/\.//' | tail -n 1` -ge 1000 || ( \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e "delay=0\n $$FENCE_TEST_ARGS_CISCO_MDS" | $(PYTHON) ./$(INPUT)"; false )
+$(TARGET): $(SRC)
+ mkdir -p `dirname $@`
+ bash $(top_srcdir)/scripts/fenceparse \
+ $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
+ $(VERSION) \
+ $(abs_srcdir) $@ | \
+ sed \
+ -e 's#@''PYTHON@#${PYTHON}#g' \
+ -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
+ -e 's#@''LOGDIR@#${LOGDIR}#g' \
+ -e 's#@''SBINDIR@#${sbindir}#g' \
+ -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
+ -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
+ -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
+ -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
+ -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
+ -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
+ -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
+ -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
+ -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
+ -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
+ -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
+ -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
+ -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
+ -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
+ -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
+ -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
+ -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
+ -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
+ -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
+ > $@
+
+ if [ 0 -eq `echo "$(@)" | grep fence_ &> /dev/null; echo $$?` ]; then \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
+ else true ; fi
+
+ for x in `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ cp $(@) $(@D)/$$x; \
+ $(MAKE) $(@D)/$$x.8; \
+ done
+
+clean: clean-man
+ rm -f $(CLEAN_TARGET:%.8=%) $(CLEAN_TARGET_ADDITIONAL) $(scsidata_SCRIPTS) */*.pyc */*.wiki
+
+ if [ "$(abs_builddir)" = "$(abs_top_builddir)/fence/agents/lib" ]; then \
+ rm -f $(TARGET); \
+ fi
+
+clean-local: clean
+%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
+ set -e && \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/../lib:$(abs_builddir)/lib \
+ $(PYTHON) $(@:%.8=%) -o metadata > $(@D)/.$(@F).tmp && \
+ xmllint --noout --relaxng $(abs_srcdir)/lib/metadata.rng $(@D)/.$(@F).tmp && \
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl $(@D)/.$(@F).tmp > $@
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl $(@D)/.$(@F).tmp | grep -v '<?xml' > $(@D)/$(@F:%.8=%.wiki)
+
+clean-man:
+ $(eval CLEAN_TARGET=$(shell find -name "*.8" | grep -Pv "kdump/fence_kdump_send.8|manual/fence_ack_manual.8"))
+ rm -f $(CLEAN_TARGET) */.*.8.tmp */*.wiki
+
+check: $(TEST_TARGET:%=%.xml-check) $(SYMTARGET:%=%.xml-check) $(TEST_TARGET:%=%.delay-check) $(TEST_TARGET:%=%.rng-check)
+
+%.xml-check: %
+ $(eval INPUT=$(subst .xml-check,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ TEMPFILE=$$(mktemp); \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$$x -o metadata | $(AWK) $(AWK_VAL) > $$TEMPFILE && \
+ diff $$TEMPFILE $(DATADIR)/$$x.xml && \
+ rm $$TEMPFILE; \
+ done
+
+%.xml-upload: %
+ $(eval INPUT=$(subst .xml-upload,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$$x -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$$x.xml; \
+ done
+
+# If test will fail, rerun fence agents to show problems
+%.delay-check: %
+ $(eval INPUT=$(subst .delay-check,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ test `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e 'delay=10\n $(FENCE_TEST_ARGS)' | $(PYTHON) $(@D)/$$x" 2>&1 |\
+ sed 's/\.//' | tail -n 1` -ge 1000 || ( \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e 'delay=0\n $(FENCE_TEST_ARGS)' | $(PYTHON) $(@D)/$$x"; false ); \
+ done
+
+%.rng-check: %
+ $(eval INPUT=$(subst .rng-check,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$$x -o metadata | \
+ /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
+ sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
+ xmllint --nsclean --noout -; \
+ done
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/fence/agents/alom/Makefile.am b/fence/agents/alom/Makefile.am
deleted file mode 100644
index 1051726..0000000
--- a/fence/agents/alom/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_alom
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/alom/Makefile.in b/fence/agents/alom/Makefile.in
deleted file mode 100644
index 3189235..0000000
--- a/fence/agents/alom/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/alom
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_alom
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/alom/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/alom/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/alom/fence_alom.py b/fence/agents/alom/fence_alom.py
index 1e95ac4..62ffd7d 100644
--- a/fence/agents/alom/fence_alom.py
+++ b/fence/agents/alom/fence_alom.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following Agent Has Been Tested On:
#
diff --git a/fence/agents/amt/Makefile.am b/fence/agents/amt/Makefile.am
deleted file mode 100644
index 5237f87..0000000
--- a/fence/agents/amt/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_amt
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -p test -a test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/amt/Makefile.in b/fence/agents/amt/Makefile.in
deleted file mode 100644
index 513301e..0000000
--- a/fence/agents/amt/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/amt
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_amt
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/amt/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/amt/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/amt/fence_amt.py b/fence/agents/amt/fence_amt.py
index 0283dc2..082f5d0 100644
--- a/fence/agents/amt/fence_amt.py
+++ b/fence/agents/amt/fence_amt.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re, os
import atexit
@@ -71,11 +71,11 @@ def create_command(options, action):
elif action == "cycle":
cmd = "echo \"y\"|" + cmd
cmd += " powercycle"
- if action in ["on", "off", "cycle"] and options.has_key("--boot-option"):
+ if action in ["on", "off", "cycle"] and "--boot-option" in options:
cmd += options["--boot-option"]
# --use-sudo / -d
- if options.has_key("--use-sudo"):
+ if "--use-sudo" in options:
cmd = options["--sudo-path"] + " " + cmd
return cmd
diff --git a/fence/agents/amt_ws/fence_amt_ws.py b/fence/agents/amt_ws/fence_amt_ws.py
new file mode 100755
index 0000000..5284a77
--- /dev/null
+++ b/fence/agents/amt_ws/fence_amt_ws.py
@@ -0,0 +1,243 @@
+#!@PYTHON@ -tt
+
+#
+# Fence agent for Intel AMT (WS) based on code from the openstack/ironic project:
+# https://github.com/openstack/ironic/blob/master/ironic/drivers/modules/amt/power.py
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+
+import sys
+import atexit
+import logging
+sys.path.append("@FENCEAGENTSLIBDIR@")
+from fencing import *
+from fencing import run_delay, fail_usage, fail, EC_STATUS
+
+import pywsman
+from xml.etree import ElementTree
+
+
+#BEGIN_VERSION_GENERATION
+RELEASE_VERSION="Fence agent for Intel AMT (WS)"
+REDHAT_COPYRIGHT=""
+BUILD_DATE=""
+#END_VERSION_GENERATION
+
+POWER_ON='2'
+POWER_OFF='8'
+POWER_CYCLE='10'
+
+RET_SUCCESS = '0'
+
+CIM_PowerManagementService = ('http://schemas.dmtf.org/wbem/wscim/1/'
+ 'cim-schema/2/CIM_PowerManagementService')
+CIM_ComputerSystem = ('http://schemas.dmtf.org/wbem/wscim/'
+ '1/cim-schema/2/CIM_ComputerSystem')
+CIM_AssociatedPowerManagementService = ('http://schemas.dmtf.org/wbem/wscim/'
+ '1/cim-schema/2/'
+ 'CIM_AssociatedPowerManagementService')
+
+CIM_BootConfigSetting = ('http://schemas.dmtf.org/wbem/wscim/'
+ '1/cim-schema/2/CIM_BootConfigSetting')
+CIM_BootSourceSetting = ('http://schemas.dmtf.org/wbem/wscim/'
+ '1/cim-schema/2/CIM_BootSourceSetting')
+
+
+def xml_find(doc, namespace, item):
+ if doc is None:
+ return
+ tree = ElementTree.fromstring(doc.root().string())
+ query = ('.//{%(namespace)s}%(item)s' % {'namespace': namespace,
+ 'item': item})
+ return tree.find(query)
+
+def _generate_power_action_input(action):
+ method_input = "RequestPowerStateChange_INPUT"
+ address = 'http://schemas.xmlsoap.org/ws/2004/08/addressing'
+ anonymous = ('http://schemas.xmlsoap.org/ws/2004/08/addressing/'
+ 'role/anonymous')
+ wsman = 'http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd'
+ namespace = CIM_PowerManagementService
+
+ doc = pywsman.XmlDoc(method_input)
+ root = doc.root()
+ root.set_ns(namespace)
+ root.add(namespace, 'PowerState', action)
+
+ child = root.add(namespace, 'ManagedElement', None)
+ child.add(address, 'Address', anonymous)
+
+ grand_child = child.add(address, 'ReferenceParameters', None)
+ grand_child.add(wsman, 'ResourceURI', CIM_ComputerSystem)
+
+ g_grand_child = grand_child.add(wsman, 'SelectorSet', None)
+ g_g_grand_child = g_grand_child.add(wsman, 'Selector', 'ManagedSystem')
+ g_g_grand_child.attr_add(wsman, 'Name', 'Name')
+ return doc
+
+def get_power_status(_, options):
+ client = pywsman.Client(options["--ip"], int(options["--ipport"]), \
+ '/wsman', 'http', 'admin', options["--password"])
+ namespace = CIM_AssociatedPowerManagementService
+ client_options = pywsman.ClientOptions()
+ doc = client.get(client_options, namespace)
+ _SOAP_ENVELOPE = 'http://www.w3.org/2003/05/soap-envelope'
+ item = 'Fault'
+ fault = xml_find(doc, _SOAP_ENVELOPE, item)
+ if fault is not None:
+ logging.error("Failed to get power state for: %s port:%s", \
+ options["--ip"], options["--ipport"])
+ fail(EC_STATUS)
+
+ item = "PowerState"
+ try: power_state = xml_find(doc, namespace, item).text
+ except AttributeError:
+ logging.error("Failed to get power state for: %s port:%s", \
+ options["--ip"], options["--ipport"])
+ fail(EC_STATUS)
+ if power_state == POWER_ON:
+ return "on"
+ elif power_state == POWER_OFF:
+ return "off"
+ else:
+ fail(EC_STATUS)
+
+def set_power_status(_, options):
+ client = pywsman.Client(options["--ip"], int(options["--ipport"]), \
+ '/wsman', 'http', 'admin', options["--password"])
+
+ method = 'RequestPowerStateChange'
+ client_options = pywsman.ClientOptions()
+ client_options.add_selector('Name', 'Intel(r) AMT Power Management Service')
+
+ if options["--action"] == "on":
+ target_state = POWER_ON
+ elif options["--action"] == "off":
+ target_state = POWER_OFF
+ elif options["--action"] == "reboot":
+ target_state = POWER_CYCLE
+ if options["--action"] in ["on", "off", "reboot"] \
+ and "--boot-option" in options:
+ set_boot_order(_, client, options)
+
+ doc = _generate_power_action_input(target_state)
+ client_doc = client.invoke(client_options, CIM_PowerManagementService, \
+ method, doc)
+ item = "ReturnValue"
+ return_value = xml_find(client_doc, CIM_PowerManagementService, item).text
+ if return_value != RET_SUCCESS:
+ logging.error("Failed to set power state: %s for: %s", \
+ options["--action"], options["--ip"])
+ fail(EC_STATUS)
+
+def set_boot_order(_, client, options):
+ method_input = "ChangeBootOrder_INPUT"
+ address = 'http://schemas.xmlsoap.org/ws/2004/08/addressing'
+ anonymous = ('http://schemas.xmlsoap.org/ws/2004/08/addressing/'
+ 'role/anonymous')
+ wsman = 'http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd'
+ namespace = CIM_BootConfigSetting
+
+ if options["--boot-option"] == "pxe":
+ device = "Intel(r) AMT: Force PXE Boot"
+ elif options["--boot-option"] == "hd" or "hdsafe":
+ device = "Intel(r) AMT: Force Hard-drive Boot"
+ elif options["--boot-option"] == "cd":
+ device = "Intel(r) AMT: Force CD/DVD Boot"
+ elif options["--boot-option"] == "diag":
+ device = "Intel(r) AMT: Force Diagnostic Boot"
+ else:
+ logging.error('Boot device: %s not supported.', \
+ options["--boot-option"])
+ return
+
+ method = 'ChangeBootOrder'
+ client_options = pywsman.ClientOptions()
+ client_options.add_selector('InstanceID', \
+ 'Intel(r) AMT: Boot Configuration 0')
+
+ doc = pywsman.XmlDoc(method_input)
+ root = doc.root()
+ root.set_ns(namespace)
+
+ child = root.add(namespace, 'Source', None)
+ child.add(address, 'Address', anonymous)
+
+ grand_child = child.add(address, 'ReferenceParameters', None)
+ grand_child.add(wsman, 'ResourceURI', CIM_BootSourceSetting)
+
+ g_grand_child = grand_child.add(wsman, 'SelectorSet', None)
+ g_g_grand_child = g_grand_child.add(wsman, 'Selector', device)
+ g_g_grand_child.attr_add(wsman, 'Name', 'InstanceID')
+ if options["--boot-option"] == "hdsafe":
+ g_g_grand_child = g_grand_child.add(wsman, 'Selector', 'True')
+ g_g_grand_child.attr_add(wsman, 'Name', 'UseSafeMode')
+
+ client_doc = client.invoke(client_options, CIM_BootConfigSetting, \
+ method, doc)
+ item = "ReturnValue"
+ return_value = xml_find(client_doc, CIM_BootConfigSetting, item).text
+ if return_value != RET_SUCCESS:
+ logging.error("Failed to set boot device to: %s for: %s", \
+ options["--boot-option"], options["--ip"])
+ fail(EC_STATUS)
+
+def reboot_cycle(_, options):
+ status = set_power_status(_, options)
+ return not bool(status)
+
+def define_new_opts():
+ all_opt["boot_option"] = {
+ "getopt" : "b:",
+ "longopt" : "boot-option",
+ "help" : "-b, --boot-option=[option] "
+ "Change the default boot behavior of the\n"
+ " machine."
+ " (pxe|hd|hdsafe|cd|diag)",
+ "required" : "0",
+ "shortdesc" : "Change the default boot behavior of the machine.",
+ "choices" : ["pxe", "hd", "hdsafe", "cd", "diag"],
+ "order" : 1
+ }
+
+def main():
+ atexit.register(atexit_handler)
+
+ device_opt = ["ipaddr", "no_login", "passwd", "boot_option", "no_port",
+ "method"]
+
+ define_new_opts()
+
+ all_opt["ipport"]["default"] = "16992"
+
+ options = check_input(device_opt, process_input(device_opt))
+
+ docs = {}
+ docs["shortdesc"] = "Fence agent for AMT (WS)"
+ docs["longdesc"] = "fence_amt_ws is an I/O Fencing agent \
+which can be used with Intel AMT (WS). This agent requires \
+the pywsman Python library which is included in OpenWSMAN. \
+(http://openwsman.github.io/)."
+ docs["vendorurl"] = "http://www.intel.com/"
+ show_docs(options, docs)
+
+ run_delay(options)
+
+ result = fence_action(None, options, set_power_status, get_power_status, \
+ None, reboot_cycle)
+
+ sys.exit(result)
+
+if __name__ == "__main__":
+ main()
diff --git a/fence/agents/apc/Makefile.am b/fence/agents/apc/Makefile.am
deleted file mode 100644
index 051ac24..0000000
--- a/fence/agents/apc/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_apc
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/apc/Makefile.in b/fence/agents/apc/Makefile.in
deleted file mode 100644
index 151762d..0000000
--- a/fence/agents/apc/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/apc
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_apc
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/apc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/apc/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/apc/fence_apc.py b/fence/agents/apc/fence_apc.py
index c6dd106..1e9c376 100644
--- a/fence/agents/apc/fence_apc.py
+++ b/fence/agents/apc/fence_apc.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -14,7 +14,7 @@
## cipher (des/blowfish) have to be defined
#####
-import sys, re
+import sys, re, time
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
from fencing import *
@@ -26,6 +26,10 @@ REDHAT_COPYRIGHT=""
BUILD_DATE="March, 2008"
#END_VERSION_GENERATION
+# Fix for connection timed out issue in:
+# https://bugzilla.redhat.com/show_bug.cgi?id=1342584
+TIMEDOUT_DELAY = 0.5
+
def get_power_status(conn, options):
exp_result = 0
outlets = {}
@@ -40,10 +44,10 @@ def get_power_status(conn, options):
if None != re.compile('.* MasterSwitch plus.*', re.IGNORECASE | re.S).match(conn.before):
switch = 1
if None != re.compile('.* MasterSwitch plus 2', re.IGNORECASE | re.S).match(conn.before):
- if not options.has_key("--switch"):
+ if "--switch" not in options:
fail_usage("Failed: You have to enter physical switch number")
else:
- if not options.has_key("--switch"):
+ if "--switch" not in options:
options["--switch"] = "1"
if None == re.compile('.*Outlet Management.*', re.IGNORECASE | re.S).match(conn.before):
@@ -78,10 +82,11 @@ def get_power_status(conn, options):
res = show_re.search(line)
if res != None:
outlets[res.group(2)] = (res.group(3), res.group(4))
+ time.sleep(TIMEDOUT_DELAY)
conn.send_eol("")
if exp_result != 0:
break
- conn.send(chr(03))
+ conn.send(chr(0o3))
conn.log_expect("- Logout", int(options["--shell-timeout"]))
conn.log_expect(options["--command-prompt"], int(options["--shell-timeout"]))
@@ -116,10 +121,10 @@ def set_power_status(conn, options):
'off': "3"
}[options["--action"]]
if None != re.compile('.* MasterSwitch plus 2', re.IGNORECASE | re.S).match(conn.before):
- if not options.has_key("--switch"):
+ if "--switch" not in options:
fail_usage("Failed: You have to enter physical switch number")
else:
- if not options.has_key("--switch"):
+ if "--switch" not in options:
options["--switch"] = 1
if None == re.compile('.*Outlet Management.*', re.IGNORECASE | re.S).match(conn.before):
@@ -151,6 +156,7 @@ def set_power_status(conn, options):
while 0 == conn.log_expect(
["Press <ENTER>"] + options["--command-prompt"], int(options["--shell-timeout"])):
+ time.sleep(TIMEDOUT_DELAY)
conn.send_eol("")
conn.send_eol(options["--plug"]+"")
@@ -171,9 +177,10 @@ def set_power_status(conn, options):
conn.log_expect("Enter 'YES' to continue or <ENTER> to cancel :", int(options["--shell-timeout"]))
conn.send_eol("YES")
conn.log_expect("Press <ENTER> to continue...", int(options["--power-timeout"]))
+ time.sleep(TIMEDOUT_DELAY)
conn.send_eol("")
conn.log_expect(options["--command-prompt"], int(options["--power-timeout"]))
- conn.send(chr(03))
+ conn.send(chr(0o3))
conn.log_expect("- Logout", int(options["--shell-timeout"]))
conn.log_expect(options["--command-prompt"], int(options["--shell-timeout"]))
@@ -232,7 +239,7 @@ will block any necessary fencing actions."
show_docs(options, docs)
## Support for --plug [switch]:[plug] notation that was used before
- if (options.has_key("--plug") == 1) and (-1 != options["--plug"].find(":")):
+ if (("--plug" in options) == 1) and (-1 != options["--plug"].find(":")):
(switch, plug) = options["--plug"].split(":", 1)
options["--switch"] = switch
options["--plug"] = plug
diff --git a/fence/agents/apc_snmp/Makefile.am b/fence/agents/apc_snmp/Makefile.am
deleted file mode 100644
index 258863c..0000000
--- a/fence/agents/apc_snmp/Makefile.am
+++ /dev/null
@@ -1,24 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_apc_snmp
-
-SYMTARGET = fence_tripplite_snmp
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC) \
- powernet369.mib \
- README
-
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-
-man_MANS = $(TARGET).8 $(SYMTARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
-
-$(SYMTARGET): $(TARGET)
- cp $^ $@
diff --git a/fence/agents/apc_snmp/Makefile.in b/fence/agents/apc_snmp/Makefile.in
deleted file mode 100644
index edcc94f..0000000
--- a/fence/agents/apc_snmp/Makefile.in
+++ /dev/null
@@ -1,676 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/apc_snmp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk README
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_apc_snmp
-SYMTARGET = fence_tripplite_snmp
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC) \
- powernet369.mib \
- README
-
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-man_MANS = $(TARGET).8 $(SYMTARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/apc_snmp/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/apc_snmp/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-$(SYMTARGET): $(TARGET)
- cp $^ $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/apc_snmp/README b/fence/agents/apc_snmp/README
deleted file mode 100644
index 75aa37a..0000000
--- a/fence/agents/apc_snmp/README
+++ /dev/null
@@ -1,45 +0,0 @@
-This is an snmp based fence agent for APC power switches to be used
-with RHEL4 Red Hat Cluster Suite.
-
-The reasons to use this agent rather than the current fence_apc agent are:
-1) This script has been tested with EVERY powerswitch that APC currently
-makes.
-2) It will work on many older models that are no longer supported by APC.
-I have been told that it even works with the AP9200 switch. Older switches
-usually don't do well with the fence_apc script.
-3) This agent works with large power switches that have more than 8 outlets.
-The fence_apc script will also, in the next update -- this script will work for you now.
-
-If feedback on this beta version of the agent is good, and if ganged switches
-can be supported, then this agent may replace fence_apc.
-
-In order to use this agent, you will need to have net-snmp-utils installed
-on every node in your cluster. net-snmp-utils is scheduled for inclusion
-in the base RHEL distribution for Update 4, and is yummable in FC5.
-
-After net-snmp-utils is installed, there will be a directory named:
-/usr/share/snmp/mibs/
-
-Place the accompanying powernet369.mib file in this directory.
-
-To use the agent, cp the agent to the /sbin directory on every
-cluster node. The interface for the fence_apc_snmp agent is identical to
-the existing fence_apc agent, so if you are using APC for fencing in
-your cluster, you *could* backup your current fence_apc agent, and
-rename this agent from fence_apc_snmp to fence_apc, and it should just work.
-
-NOTE: The fence_apc_snmp agent does not yet support ganged or 'daisy-chained'
-APC switches.
-
-If you would rather not copy over your fence_apc agent, you can still use
-the fence_apc_snmp agent by dropping it into /sbin on every node, and then
-defining a <fencedevice> in the cluster.conf file with agent="fence_apc_snmp"
-as an attribute, and use it that way. Note, please, that the GUI does
-not support this agent yet, and you will have to edit your cluster.conf
-by hand and then propagate it yourself. If you need help with this, email
-me on linux-cluster or at the address below.
-
-Big thanks to Nate Straz who laid the foundation for this agent.
-
-Please let me know how this agent works.
---Jim Parsons - jparsons at redhat.com
diff --git a/fence/agents/apc_snmp/fence_apc_snmp.py b/fence/agents/apc_snmp/fence_apc_snmp.py
index 8bb3d48..f93cfa8 100644
--- a/fence/agents/apc_snmp/fence_apc_snmp.py
+++ b/fence/agents/apc_snmp/fence_apc_snmp.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following agent has been tested on:
# - APC Switched Rack PDU - SNMP v1
@@ -113,7 +113,7 @@ def apc_set_device(conn):
# First resolve type of APC
apc_type = conn.walk(OID_SYS_OBJECT_ID)
- if not ((len(apc_type) == 1) and (agents_dir.has_key(apc_type[0][1]))):
+ if not ((len(apc_type) == 1) and (apc_type[0][1] in agents_dir)):
apc_type = [[None, None]]
device = agents_dir[apc_type[0][1]]
@@ -197,13 +197,13 @@ def main():
options = check_input(device_opt, process_input(device_opt))
## Support for -n [switch]:[plug] notation that was used before
- if (options.has_key("--plug")) and (-1 != options["--plug"].find(":")):
+ if ("--plug" in options) and (-1 != options["--plug"].find(":")):
(switch, plug) = options["--plug"].split(":", 1)
if switch.isdigit() and plug.isdigit():
options["--switch"] = switch
options["--plug"] = plug
- if not options.has_key("--switch"):
+ if "--switch" not in options:
options["--switch"] = "1"
docs = {}
@@ -213,6 +213,7 @@ which can be used with the APC network power switch or Tripplite PDU devices.\
It logs into a device via SNMP and reboots a specified outlet. It supports \
SNMP v1, v2c, v3 with all combinations of authenticity/privacy settings."
docs["vendorurl"] = "http://www.apc.com"
+ docs["symlink"] = [("fence_tripplite_snmp", "Fence agent for Tripplife over SNMP")]
show_docs(options, docs)
# Operate the fencing device
diff --git a/fence/agents/apc_snmp/powernet369.mib b/fence/agents/apc_snmp/powernet369.mib
deleted file mode 100644
index ab948f8..0000000
--- a/fence/agents/apc_snmp/powernet369.mib
+++ /dev/null
@@ -1,31109 +0,0 @@
--- *************************************************************************
--- AMERICAN POWER CONVERSION PowerNet-MIB
--- *************************************************************************
--- Copyright (c) 2005 American Power Conversion, Inc.
--- PowerNet is a Trademark of American Power Conversion Corp.
---
--- Title: APC TOP LEVEL PowerNet MIB
---
--- Version : 3.6.9
---
--- Generated by script: tomib.awk
---
--- Input File: powernetPS.mib
---
--- Created: Wednesday, January, 26, 2005
---
--- Revision History:
--- *************************************************************************
-
--- - v3.2.0 Added functionality for MasterSwitch Plus
--- - v3.3.0 Added functionality for MX28B (dcDM3) and 3-phase UPS
--- - v3.3.2 New traps for Symmetra PX UPS
--- 07/15/01 - v3.4.0 Added transfer switch
--- - v3.4.3 Added functionality for External and Integrated Environmental Monitor
--- 06/14/02 - v3.4.4 Added dcmim2(Siemens) branch, Battery Manager(Reading) traps, and
--- Psx Traps for PDU and RM-PDU and Netlock branch/traps
--- 06/18/02 - v3.5.0a Sync Control Group support
--- 08/06/02 - v3.5.0a Environmental Management System branch/traps
--- 09/16/02 - v3.5.0b Fixed some odds/ends ... going to RM-PDU for MS additions
--- 09/25/02 - v3.5.0c MS3 additions
--- 11/05/02 - v3.5.0e More Environmental Management System/A-Link devices(ARU)
--- 11/22/02 - v3.5.0g Added General APC device status OID
--- 11/27/02 - v3.5.0h Wrapped up MS3 ((Controlled or Metered) Rack PDU) changes
--- 12/26/02 - v3.5.1a Changed MS3 name again, Controlled to Switched Rack PDU
--- 01/07/03 - v3.6.0a Added OIDs/Traps for UPS Switchable Outlet Groups.
--- 01/09/03 - Adding the General APC device discovery OIDs (hidden)
--- 01/28/03 - v3.6.0c Made some small trap pair fixes for Switched Rack PDU (MS3)
--- 02/13/03 - v3.6.0d Mods from the review and some EMS fixes.
--- Added OID for the new 20kVA Symmetra 3 Phase type.
--- Added OIDs to upsAdvConfig for Symmetra type UPSs.
--- Added upsDiagnostics branch OID for Symmetra module information.
--- 04/05/03 - v3.6.2 Added OID for the new Smart-UPS 7500 and 10000 types.
--- 06/04/03 - v3.6.3 Added OIDs/Traps for AirFM.
--- 06/24/03 - v3.6.4 Moved some AirFM temps and humidities from system level to module level.
--- 10/24/03 - v3.6.4a Added OIDs/Traps for xPDU.
--- 10/27/03 - v3.6.4f Added AirPA OIDs.
--- 11/03/03 - v3.6.4g Merge of 3.6.4e and 3.6.4f
--- 11/07/03 - v3.6.4h Additional review corrections
--- 12/01/03 - v3.6.5a Added group OIDs for Air FM. Added C & F OIDs for Air PA setpoint.
--- 12/19/03 - v3.6.5b Review corrections.
--- 02/23/04 - v3.6.5c Added Modbus to experimental and multiple CB(bank) rPDU support
--- 05/05/04 - v3.6.6 Adding EMS status OID and trap for H/W issues, redefined duplicate
--- trap #228 (to ARU Device config change) and minor clean-up
--- 05/12/04 - v3.6.7a Added Air FM alarm status OIDs.
--- 06/03/04 - v3.6.7b Added UPS Config for Simple Signal Shutdowns and Number of External
--- batteries. Added Mute option to the UPS Config Audible Alarm.
--- 07/12/04 - v3.6.7d Removed Air FM alarm status OIDs due to delay in release.
--- 07/14/04 - v3.6.7d Added a detailed description to the UPSAdvConfigAlarm OID
--- 07/14/04 - v3.6.7e Added Custom Event traps
--- 08/04/04 - v3.6.7 Tag for final builds, see v3.6.7 beta build notes for changes
--- 08/26/04 - v3.6.8a Added new traps for UPS internal over temperature fault and cleared.
--- 09/01/04 - v3.6.8b Adding new thresholds for EMS probe config & status
--- 09/08/04 - v3.6.8c Corrections from MIB review.
--- 09/30/04 - v3.6.8d Added new traps for AIS ^F Message events.
--- 10/21/04 - v3.6.8e EMS. Added missing traps and new Rate functionality.
--- 10/22/04 - v3.6.8f Added resetNetworkLeaveModeAndRestart option to the mcontrolRestartAgent OID.
--- 10/28/04 - v3.6.8g Updated EMS sections from mib committee review.
--- 11/22/04 - v3.6.8 Tag for final build.
--- 12/02/04 - v3.6.9a Added OIDs and traps for BMS-HVA.
--- 12/20/04 - v3.6.9c corrections to xPDU.
--- 12/20/04 - v3.6.9c added OIDs and traps for xATS.
--- 01/03/05 - v3.6.9d removed traps for xATS.
--- 01/03/05 - v3.6.9e correction to xATS entries, that removed underscores (mib browser incompatibility)
--- 01/07/05 - v3.6.9f
--- 01/14/05 - v3.6.9g add xPDU OIDs and traps and some corrections.
--- 01/14/05 - v3.6.9g modifications to xATS OIDs and traps.
-
--- *************************************************************************
--- *************************************************************************
--- PowerNet-MIB { iso org(3) dod(6) internet(1) private(4)
--- enterprises(1) apc(318) }
-
-PowerNet-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
- enterprises, IpAddress, Gauge, TimeTicks FROM RFC1155-SMI
- DisplayString FROM RFC1213-MIB
- OBJECT-TYPE FROM RFC-1212
- TRAP-TYPE FROM RFC-1215;
-
-apc OBJECT IDENTIFIER ::= { enterprises 318 }
-
-products OBJECT IDENTIFIER ::= { apc 1 }
-apcmgmt OBJECT IDENTIFIER ::= { apc 2 }
-
-hardware OBJECT IDENTIFIER ::= { products 1 }
-software OBJECT IDENTIFIER ::= { products 2 }
-system OBJECT IDENTIFIER ::= { products 3 }
-experimental OBJECT IDENTIFIER ::= { products 4 }
-
-mconfig OBJECT IDENTIFIER ::= { apcmgmt 1 }
-mcontrol OBJECT IDENTIFIER ::= { apcmgmt 2 }
-mtrapargs OBJECT IDENTIFIER ::= { apcmgmt 3 }
-mfiletransfer OBJECT IDENTIFIER ::= { apcmgmt 4 }
-
-mconfigClock OBJECT IDENTIFIER ::= { mconfig 6 }
-
-mfiletransferStatus OBJECT IDENTIFIER ::= { mfiletransfer 1 }
-mfiletransferConfig OBJECT IDENTIFIER ::= { mfiletransfer 2 }
-mfiletransferControl OBJECT IDENTIFIER ::= { mfiletransfer 3 }
-
-mfiletransferConfigSettings OBJECT IDENTIFIER ::= { mfiletransferConfig 1 }
-mfiletransferConfigTFTP OBJECT IDENTIFIER ::= { mfiletransferConfig 2 }
-mfiletransferConfigFTP OBJECT IDENTIFIER ::= { mfiletransferConfig 3 }
-
-ups OBJECT IDENTIFIER ::= { hardware 1 }
-measureUps OBJECT IDENTIFIER ::= { hardware 2 }
-miniSNMPadapter OBJECT IDENTIFIER ::= { hardware 3 }
-masterswitch OBJECT IDENTIFIER ::= { hardware 4 }
-masterswitchVM OBJECT IDENTIFIER ::= { hardware 5 }
-masterswitchMSP OBJECT IDENTIFIER ::= { hardware 6 }
-dcDM3 OBJECT IDENTIFIER ::= { hardware 7 }
-automaticTransferSwitch OBJECT IDENTIFIER ::= { hardware 8 }
-dc2 OBJECT IDENTIFIER ::= { hardware 9 }
-environmentalMonitor OBJECT IDENTIFIER ::= { hardware 10 }
-netlock OBJECT IDENTIFIER ::= { hardware 11 }
-rPDU OBJECT IDENTIFIER ::= { hardware 12 }
-airConditioners OBJECT IDENTIFIER ::= { hardware 13 }
-rARU OBJECT IDENTIFIER ::= { hardware 14 }
-xPDU OBJECT IDENTIFIER ::= { hardware 15 }
-battMan OBJECT IDENTIFIER ::= { hardware 16 }
-xATS OBJECT IDENTIFIER ::= { hardware 17 }
-generator OBJECT IDENTIFIER ::= { hardware 18 }
-
-powerNetSubAgent OBJECT IDENTIFIER ::= { software 1 }
-
-powerNetSoftwareSystem OBJECT IDENTIFIER ::= { powerNetSubAgent 1 }
-powerNetSoftwareConfig OBJECT IDENTIFIER ::= { powerNetSubAgent 2 }
-
-backUPS OBJECT IDENTIFIER ::= { system 1 }
-smartUPS OBJECT IDENTIFIER ::= { system 2 }
-matrixUPS OBJECT IDENTIFIER ::= { system 3 }
-masterSwitch OBJECT IDENTIFIER ::= { system 4 }
-symmetraUPS OBJECT IDENTIFIER ::= { system 5 }
-dp100E OBJECT IDENTIFIER ::= { system 6 }
-dp300E OBJECT IDENTIFIER ::= { system 7 }
-monitors OBJECT IDENTIFIER ::= { system 8 }
-redundantSwitch OBJECT IDENTIFIER ::= { system 9 }
-dcPower OBJECT IDENTIFIER ::= { system 10 }
-automaticXferSwitch OBJECT IDENTIFIER ::= { system 11 }
-netLock OBJECT IDENTIFIER ::= { system 12 }
-symmetra3PhaseUPS OBJECT IDENTIFIER ::= { system 13 }
-networkAir OBJECT IDENTIFIER ::= { system 14 }
-infraXurePDU OBJECT IDENTIFIER ::= { system 15 }
-ais5000UPS OBJECT IDENTIFIER ::= { system 16 }
-smartUPS3Phase OBJECT IDENTIFIER ::= { system 17 }
-battManager OBJECT IDENTIFIER ::= { system 18 }
-infraXureATS OBJECT IDENTIFIER ::= { system 19 }
-
-battManIdent OBJECT IDENTIFIER ::= { battMan 1 }
-battManSystemCalib OBJECT IDENTIFIER ::= { battMan 2 }
-battManUnitCalib OBJECT IDENTIFIER ::= { battMan 3 }
-battManStringCalib OBJECT IDENTIFIER ::= { battMan 4 }
-battManBatteryCalib OBJECT IDENTIFIER ::= { battMan 5 }
-battManConfig OBJECT IDENTIFIER ::= { battMan 6 }
-battManAlarm OBJECT IDENTIFIER ::= { battMan 7 }
-battManSystemStatus OBJECT IDENTIFIER ::= { battMan 8 }
-battManStringStatus OBJECT IDENTIFIER ::= { battMan 9 }
-battManBatteryStatus OBJECT IDENTIFIER ::= { battMan 10 }
-battManInputContactStatus OBJECT IDENTIFIER ::= { battMan 11 }
-battManControl OBJECT IDENTIFIER ::= { battMan 12 }
-battManTestResults OBJECT IDENTIFIER ::= { battMan 13 }
-
-xPDUIdent OBJECT IDENTIFIER ::= { xPDU 1 }
-xPDUDevice OBJECT IDENTIFIER ::= { xPDU 2 }
-xPDUACMonitoringPoint OBJECT IDENTIFIER ::= { xPDU 3 }
-xPDUCircuitBreakers OBJECT IDENTIFIER ::= { xPDU 4 }
-xPDUInputContacts OBJECT IDENTIFIER ::= { xPDU 5 }
-xPDUOutputRelays OBJECT IDENTIFIER ::= { xPDU 6 }
-xPDUMiscGroup OBJECT IDENTIFIER ::= { xPDU 7 }
-
-xPDUMainInput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 1 }
-xPDUBypassInput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 2 }
-xPDUUPSInput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 3 }
-xPDUSystemOutput OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 4 }
-xPDUGroundMonitorPoint OBJECT IDENTIFIER ::= { xPDUACMonitoringPoint 5 }
-
-xPDUSystemBreakers OBJECT IDENTIFIER ::= { xPDUCircuitBreakers 1 }
-xPDUBranchBreakers OBJECT IDENTIFIER ::= { xPDUCircuitBreakers 2 }
-
-xATSIdent OBJECT IDENTIFIER ::= { xATS 1 }
-xATSDevice OBJECT IDENTIFIER ::= { xATS 2 }
-xATSSwitch OBJECT IDENTIFIER ::= { xATS 3 }
-xATSACMonitoringPoint OBJECT IDENTIFIER ::= { xATS 4 }
-xATSTesting OBJECT IDENTIFIER ::= { xATS 5 }
-xATSInputContacts OBJECT IDENTIFIER ::= { xATS 6 }
-xATSOutputRelays OBJECT IDENTIFIER ::= { xATS 7 }
-xATSMisc OBJECT IDENTIFIER ::= { xATS 8 }
-
-xATSSwitchStatus OBJECT IDENTIFIER ::= { xATSSwitch 1 }
-xATSSwitchSettings OBJECT IDENTIFIER ::= { xATSSwitch 2 }
-xATSSwitchTimers OBJECT IDENTIFIER ::= { xATSSwitch 3 }
-xATSSwitchBlockMap OBJECT IDENTIFIER ::= { xATSSwitch 4 }
-xATSSwitchStatistics OBJECT IDENTIFIER ::= { xATSSwitch 5 }
-
-xATSSource1 OBJECT IDENTIFIER ::= { xATSACMonitoringPoint 1 }
-xATSSource2 OBJECT IDENTIFIER ::= { xATSACMonitoringPoint 2 }
-xATSSystemOutput OBJECT IDENTIFIER ::= { xATSACMonitoringPoint 3 }
-
-xATSTestingStatus OBJECT IDENTIFIER ::= { xATSTesting 1 }
-xATSTestingResults OBJECT IDENTIFIER ::= { xATSTesting 2 }
-xATSTestingSchedule OBJECT IDENTIFIER ::= { xATSTesting 3 }
-xATSTestingSimulatePowerFail OBJECT IDENTIFIER ::= { xATSTesting 4 }
-
-xATSGenerator OBJECT IDENTIFIER ::= { generator 1 }
-
-xATSGeneratorIdent OBJECT IDENTIFIER ::= { xATSGenerator 1 }
-xATSGeneratorStatus OBJECT IDENTIFIER ::= { xATSGenerator 2 }
-xATSGeneratorAdvStatus OBJECT IDENTIFIER ::= { xATSGenerator 3 }
-xATSGeneratorOutput OBJECT IDENTIFIER ::= { xATSGenerator 4 }
-xATSGeneratorSettings OBJECT IDENTIFIER ::= { xATSGenerator 5 }
-xATSGeneratorService OBJECT IDENTIFIER ::= { xATSGenerator 6 }
-xATSGeneratorFuelSystem OBJECT IDENTIFIER ::= { xATSGenerator 7 }
-
-
-smartUPS250 OBJECT IDENTIFIER ::= { smartUPS 1 }
-smartUPS400 OBJECT IDENTIFIER ::= { smartUPS 2 }
-smartUPS600 OBJECT IDENTIFIER ::= { smartUPS 3 }
-smartUPS900 OBJECT IDENTIFIER ::= { smartUPS 4 }
-smartUPS1250 OBJECT IDENTIFIER ::= { smartUPS 5 }
-smartUPS2000 OBJECT IDENTIFIER ::= { smartUPS 6 }
-
-smartUPS450 OBJECT IDENTIFIER ::= { smartUPS 7 }
-smartUPS700 OBJECT IDENTIFIER ::= { smartUPS 8 }
-smartUPS1000 OBJECT IDENTIFIER ::= { smartUPS 9 }
-smartUPS1400 OBJECT IDENTIFIER ::= { smartUPS 10 }
-smartUPS2200 OBJECT IDENTIFIER ::= { smartUPS 11 }
-smartUPS3000 OBJECT IDENTIFIER ::= { smartUPS 12 }
-smartUPS5000 OBJECT IDENTIFIER ::= { smartUPS 13 }
-smartUPS7500 OBJECT IDENTIFIER ::= { smartUPS 14 }
-smartUPS10000 OBJECT IDENTIFIER ::= { smartUPS 15 }
-smartUPS1500 OBJECT IDENTIFIER ::= { smartUPS 16 }
-
-matrixUPS3000 OBJECT IDENTIFIER ::= { matrixUPS 1 }
-matrixUPS5000 OBJECT IDENTIFIER ::= { matrixUPS 2 }
-
-masterSwitchV1 OBJECT IDENTIFIER ::= { masterSwitch 1}
-masterSwitchV2 OBJECT IDENTIFIER ::= { masterSwitch 2}
-masterSwitchVM OBJECT IDENTIFIER ::= { masterSwitch 3}
-masterSwitchMSP OBJECT IDENTIFIER ::= { masterSwitch 4}
-masterSwitchrPDU OBJECT IDENTIFIER ::= { masterSwitch 5}
-
-symmetraUPS4kVA OBJECT IDENTIFIER ::= { symmetraUPS 1 }
-symmetraUPS8kVA OBJECT IDENTIFIER ::= { symmetraUPS 2 }
-symmetraUPS12kVA OBJECT IDENTIFIER ::= { symmetraUPS 3 }
-symmetraUPS16kVA OBJECT IDENTIFIER ::= { symmetraUPS 4 }
-
-environmental OBJECT IDENTIFIER ::= { monitors 1 }
-environmentalMgtSystem OBJECT IDENTIFIER ::= { monitors 2 }
-emu2 OBJECT IDENTIFIER ::= { monitors 3 }
-
-dm3 OBJECT IDENTIFIER ::= { dcPower 1 }
-dcmim2 OBJECT IDENTIFIER ::= { dcPower 2 }
-
-symmetra3PhaseUPS40kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 1 }
-symmetra3PhaseUPS60kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 2 }
-symmetra3PhaseUPS80kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 3 }
-symmetra3PhaseUPS20kVA OBJECT IDENTIFIER ::= { symmetra3PhaseUPS 4 }
-
-airFMSeries OBJECT IDENTIFIER ::= { networkAir 1 }
-rackAirRemovalUnit OBJECT IDENTIFIER ::= { networkAir 2 }
-airPASeries OBJECT IDENTIFIER ::= { networkAir 3 }
-
-ais5000UPS10kVA OBJECT IDENTIFIER ::= { ais5000UPS 1 }
-ais5000UPS20kVA OBJECT IDENTIFIER ::= { ais5000UPS 2 }
-ais5000UPS30kVA OBJECT IDENTIFIER ::= { ais5000UPS 3 }
-ais5000UPS40kVA OBJECT IDENTIFIER ::= { ais5000UPS 4 }
-ais5000UPS60kVA OBJECT IDENTIFIER ::= { ais5000UPS 5 }
-ais5000UPS80kVA OBJECT IDENTIFIER ::= { ais5000UPS 6 }
-ais5000UPS100kVA OBJECT IDENTIFIER ::= { ais5000UPS 7 }
-
-smartUPS3Phase10kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 1 }
-smartUPS3Phase15kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 2 }
-smartUPS3Phase20kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 3 }
-smartUPS3Phase30kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 4 }
-smartUPS3Phase40kVA OBJECT IDENTIFIER ::= { smartUPS3Phase 5 }
-
-upsIdent OBJECT IDENTIFIER ::= { ups 1 }
-upsBattery OBJECT IDENTIFIER ::= { ups 2 }
-upsInput OBJECT IDENTIFIER ::= { ups 3 }
-upsOutput OBJECT IDENTIFIER ::= { ups 4 }
-upsConfig OBJECT IDENTIFIER ::= { ups 5 }
-upsControl OBJECT IDENTIFIER ::= { ups 6 }
-upsTest OBJECT IDENTIFIER ::= { ups 7 }
-upsComm OBJECT IDENTIFIER ::= { ups 8 }
-upsPhase OBJECT IDENTIFIER ::= { ups 9 }
-upsSyncCtrlGroup OBJECT IDENTIFIER ::= { ups 10 }
-upsState OBJECT IDENTIFIER ::= { ups 11 }
-upsOutletGroups OBJECT IDENTIFIER ::= { ups 12 }
-upsDiagnostics OBJECT IDENTIFIER ::= { ups 13 }
-
-upsBasicIdent OBJECT IDENTIFIER ::= { upsIdent 1 }
-upsAdvIdent OBJECT IDENTIFIER ::= { upsIdent 2 }
-
-upsBasicBattery OBJECT IDENTIFIER ::= { upsBattery 1 }
-upsAdvBattery OBJECT IDENTIFIER ::= { upsBattery 2 }
-
-upsBasicInput OBJECT IDENTIFIER ::= { upsInput 1 }
-upsAdvInput OBJECT IDENTIFIER ::= { upsInput 2 }
-
-upsBasicOutput OBJECT IDENTIFIER ::= { upsOutput 1 }
-upsAdvOutput OBJECT IDENTIFIER ::= { upsOutput 2 }
-
-upsBasicConfig OBJECT IDENTIFIER ::= { upsConfig 1 }
-upsAdvConfig OBJECT IDENTIFIER ::= { upsConfig 2 }
-
-upsBasicControl OBJECT IDENTIFIER ::= { upsControl 1 }
-upsAdvControl OBJECT IDENTIFIER ::= { upsControl 2 }
-
-upsBasicTest OBJECT IDENTIFIER ::= { upsTest 1 }
-upsAdvTest OBJECT IDENTIFIER ::= { upsTest 2 }
-
-upsPhaseResetValues OBJECT IDENTIFIER ::= { upsPhase 1 }
-upsPhaseInput OBJECT IDENTIFIER ::= { upsPhase 2 }
-upsPhaseOutput OBJECT IDENTIFIER ::= { upsPhase 3 }
-
-upsSyncCtrlGroupConfig OBJECT IDENTIFIER ::= { upsSyncCtrlGroup 1 }
-upsSyncCtrlGroupStatus OBJECT IDENTIFIER ::= { upsSyncCtrlGroup 2 }
-
-upsBasicState OBJECT IDENTIFIER ::= { upsState 1 }
-upsAdvState OBJECT IDENTIFIER ::= { upsState 2 }
-
-upsOutletGroupStatus OBJECT IDENTIFIER ::= { upsOutletGroups 1 }
-upsOutletGroupConfig OBJECT IDENTIFIER ::= { upsOutletGroups 2 }
-upsOutletGroupControl OBJECT IDENTIFIER ::= { upsOutletGroups 3 }
-
-upsDiagnosticIM OBJECT IDENTIFIER ::= { upsDiagnostics 1 }
-upsDiagnosticPowerModules OBJECT IDENTIFIER ::= { upsDiagnostics 2 }
-upsDiagnosticBatteries OBJECT IDENTIFIER ::= { upsDiagnostics 3 }
-upsDiagnosticSubsystem OBJECT IDENTIFIER ::= { upsDiagnostics 4 }
-upsDiagnosticExternalDevices OBJECT IDENTIFIER ::= { upsDiagnostics 5 }
-upsDiagnosticComBus OBJECT IDENTIFIER ::= { upsDiagnostics 6 }
-
-upsDiagSwitchGear OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 1 }
-upsDiagMCCBBox OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 2 }
-upsDiagTransformer OBJECT IDENTIFIER ::= { upsDiagnosticExternalDevices 3 }
-
-mUpsEnviron OBJECT IDENTIFIER ::= { measureUps 1 }
-mUpsContact OBJECT IDENTIFIER ::= { measureUps 2 }
-
-serialPort OBJECT IDENTIFIER ::= { miniSNMPadapter 1}
-
-serialPort1 OBJECT IDENTIFIER ::= { serialPort 1}
-serialPort2 OBJECT IDENTIFIER ::= { serialPort 2}
-
-serialPort2Config OBJECT IDENTIFIER ::= { serialPort2 1}
-serialPort2Control OBJECT IDENTIFIER ::= { serialPort2 2}
-
-sPDUIdent OBJECT IDENTIFIER ::= { masterswitch 1 }
-sPDUMasterControl OBJECT IDENTIFIER ::= { masterswitch 2 }
-sPDUMasterConfig OBJECT IDENTIFIER ::= { masterswitch 3 }
-sPDUOutletControl OBJECT IDENTIFIER ::= { masterswitch 4 }
-sPDUOutletConfig OBJECT IDENTIFIER ::= { masterswitch 5 }
-
-sPDUIdentVM OBJECT IDENTIFIER ::= { masterswitchVM 1 }
-sPDUMasterControlVM OBJECT IDENTIFIER ::= { masterswitchVM 2 }
-sPDUMasterConfigVM OBJECT IDENTIFIER ::= { masterswitchVM 3 }
-sPDUMasterStatusVM OBJECT IDENTIFIER ::= { masterswitchVM 4 }
-sPDUOutletControlVM OBJECT IDENTIFIER ::= { masterswitchVM 5 }
-sPDUOutletConfigVM OBJECT IDENTIFIER ::= { masterswitchVM 6 }
-sPDUOutletStatusVM OBJECT IDENTIFIER ::= { masterswitchVM 7 }
-
-sPDUIdentMSP OBJECT IDENTIFIER ::= { masterswitchMSP 1 }
-sPDUMasterControlMSP OBJECT IDENTIFIER ::= { masterswitchMSP 2 }
-sPDUMasterConfigMSP OBJECT IDENTIFIER ::= { masterswitchMSP 3 }
-sPDUMasterStatusMSP OBJECT IDENTIFIER ::= { masterswitchMSP 4 }
-sPDUOutletControlMSP OBJECT IDENTIFIER ::= { masterswitchMSP 5 }
-sPDUOutletConfigMSP OBJECT IDENTIFIER ::= { masterswitchMSP 6 }
-sPDUOutletStatusMSP OBJECT IDENTIFIER ::= { masterswitchMSP 7 }
-
-sPDUOutletConfigMSPall OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 1 }
-sPDUOutletConfigMSPgs OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 2 }
-sPDUOutletConfigMSPannun OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 3 }
-sPDUOutletConfigMSPmups OBJECT IDENTIFIER ::= { sPDUOutletConfigMSP 4 }
-
-rPDUIdent OBJECT IDENTIFIER ::= { rPDU 1 }
-rPDULoad OBJECT IDENTIFIER ::= { rPDU 2 }
-rPDUOutlet OBJECT IDENTIFIER ::= { rPDU 3 }
-rPDUPowerSupply OBJECT IDENTIFIER ::= { rPDU 4 }
-
-rPDULoadDevice OBJECT IDENTIFIER ::= { rPDULoad 1 }
-rPDULoadPhaseConfig OBJECT IDENTIFIER ::= { rPDULoad 2 }
-rPDULoadStatus OBJECT IDENTIFIER ::= { rPDULoad 3 }
-rPDULoadBankConfig OBJECT IDENTIFIER ::= { rPDULoad 4 }
-
-rPDUOutletDevice OBJECT IDENTIFIER ::= { rPDUOutlet 1 }
-rPDUOutletPhase OBJECT IDENTIFIER ::= { rPDUOutlet 2 }
-rPDUOutletControl OBJECT IDENTIFIER ::= { rPDUOutlet 3 }
-rPDUOutletConfig OBJECT IDENTIFIER ::= { rPDUOutlet 4 }
-rPDUOutletStatus OBJECT IDENTIFIER ::= { rPDUOutlet 5 }
-rPDUOutletBank OBJECT IDENTIFIER ::= { rPDUOutlet 6 }
-
-rPDUPowerSupplyDevice OBJECT IDENTIFIER ::= { rPDUPowerSupply 1 }
-
-dm3Ident OBJECT IDENTIFIER ::= { dcDM3 1 }
-dm3Config OBJECT IDENTIFIER ::= { dcDM3 2 }
-dm3Status OBJECT IDENTIFIER ::= { dcDM3 3 }
-
-dm3IdentSystem OBJECT IDENTIFIER ::= { dm3Ident 1}
-
-dm3ConfigSystem OBJECT IDENTIFIER ::= { dm3Config 1 }
-dm3ConfigLVD OBJECT IDENTIFIER ::= { dm3Config 2 }
-dm3ConfigBattery OBJECT IDENTIFIER ::= { dm3Config 3 }
-dm3ConfigPowerModules OBJECT IDENTIFIER ::= { dm3Config 4 }
-dm3ConfigRelays OBJECT IDENTIFIER ::= { dm3Config 5 }
-dm3ConfigDistribution OBJECT IDENTIFIER ::= { dm3Config 6 }
-
-dm3ConfigRectifier OBJECT IDENTIFIER ::= { dm3ConfigPowerModules 1 }
-dm3ConfigConverter OBJECT IDENTIFIER ::= { dm3ConfigPowerModules 2 }
-
-dm3ConfigRectThresh OBJECT IDENTIFIER ::= { dm3ConfigRectifier 1 }
-dm3ConfigRectAlarms OBJECT IDENTIFIER ::= { dm3ConfigRectifier 2 }
-
-dm3ConfigConvThresh OBJECT IDENTIFIER ::= { dm3ConfigConverter 1 }
-dm3ConfigConvAlarms OBJECT IDENTIFIER ::= { dm3ConfigConverter 2 }
-
-dm3ConfigOutputRelays OBJECT IDENTIFIER ::= { dm3ConfigRelays 1 }
-dm3ConfigInputRelays OBJECT IDENTIFIER ::= { dm3ConfigRelays 2 }
-
-dm3ConfigBreakers OBJECT IDENTIFIER ::= { dm3ConfigDistribution 1 }
-dm3ConfigFuses OBJECT IDENTIFIER ::= { dm3ConfigDistribution 2 }
-
-dm3StatusSystem OBJECT IDENTIFIER ::= { dm3Status 1 }
-dm3StatusAlarms OBJECT IDENTIFIER ::= { dm3Status 2 }
-dm3StatusBattery OBJECT IDENTIFIER ::= { dm3Status 3 }
-dm3StatusOEM OBJECT IDENTIFIER ::= { dm3Status 4 }
-dm3StatusLVD OBJECT IDENTIFIER ::= { dm3Status 5 }
-dm3StatusPowerModules OBJECT IDENTIFIER ::= { dm3Status 6 }
-dm3StatusRelays OBJECT IDENTIFIER ::= { dm3Status 7 }
-dm3StatusDistribution OBJECT IDENTIFIER ::= { dm3Status 8 }
-
-dm3StatusRectifier OBJECT IDENTIFIER ::= { dm3StatusPowerModules 1 }
-dm3StatusConverter OBJECT IDENTIFIER ::= { dm3StatusPowerModules 2 }
-
-dm3StatusOutputRelays OBJECT IDENTIFIER ::= { dm3StatusRelays 1 }
-dm3StatusInputRelays OBJECT IDENTIFIER ::= { dm3StatusRelays 2 }
-
-dm3StatusBreakers OBJECT IDENTIFIER ::= { dm3StatusDistribution 1 }
-dm3StatusFuses OBJECT IDENTIFIER ::= { dm3StatusDistribution 2 }
-
-atsIdent OBJECT IDENTIFIER ::= { automaticTransferSwitch 1 }
-atsCalibration OBJECT IDENTIFIER ::= { automaticTransferSwitch 2 }
-atsControl OBJECT IDENTIFIER ::= { automaticTransferSwitch 3 }
-atsConfig OBJECT IDENTIFIER ::= { automaticTransferSwitch 4 }
-atsStatus OBJECT IDENTIFIER ::= { automaticTransferSwitch 5 }
-
-atsCalibrationInput OBJECT IDENTIFIER ::= { atsCalibration 1 }
-atsCalibrationPowerSupply OBJECT IDENTIFIER ::= { atsCalibration 2 }
-atsCalibrationOutput OBJECT IDENTIFIER ::= { atsCalibration 3 }
-
-atsStatusDeviceStatus OBJECT IDENTIFIER ::= { atsStatus 1 }
-atsStatusResetValues OBJECT IDENTIFIER ::= { atsStatus 2 }
-atsStatusInput OBJECT IDENTIFIER ::= { atsStatus 3 }
-atsStatusOutput OBJECT IDENTIFIER ::= { atsStatus 4 }
-
-dcmim2Ident OBJECT IDENTIFIER ::= { dc2 1 }
-dcmim2Control OBJECT IDENTIFIER ::= { dc2 2 }
-dcmim2Config OBJECT IDENTIFIER ::= { dc2 3 }
-dcmim2Status OBJECT IDENTIFIER ::= { dc2 4 }
-
-dcmim2IdentSystem OBJECT IDENTIFIER ::= { dcmim2Ident 1 }
-
-dcmim2ControlSystem OBJECT IDENTIFIER ::= { dcmim2Control 1 }
-
-dcmim2ConfigSystem OBJECT IDENTIFIER ::= { dcmim2Config 1 }
-dcmim2ConfigBattery OBJECT IDENTIFIER ::= { dcmim2Config 2 }
-dcmim2ConfigLVD OBJECT IDENTIFIER ::= { dcmim2Config 3 }
-
-dcmim2StatusSystem OBJECT IDENTIFIER ::= { dcmim2Status 1 }
-dcmim2StatusRectifier OBJECT IDENTIFIER ::= { dcmim2Status 2 }
-dcmim2StatusBattery OBJECT IDENTIFIER ::= { dcmim2Status 3 }
-dcmim2StatusLVD OBJECT IDENTIFIER ::= { dcmim2Status 4 }
-dcmim2StatusAlarms OBJECT IDENTIFIER ::= { dcmim2Status 5 }
-
-external OBJECT IDENTIFIER ::= { environmentalMonitor 1 }
-integrated OBJECT IDENTIFIER ::= { environmentalMonitor 2 }
-envMgtSystem OBJECT IDENTIFIER ::= { environmentalMonitor 3 }
-
-emIdent OBJECT IDENTIFIER ::= { external 1 }
-emConfig OBJECT IDENTIFIER ::= { external 2 }
-emStatus OBJECT IDENTIFIER ::= { external 3 }
-
-iemIdent OBJECT IDENTIFIER ::= { integrated 1 }
-iemConfig OBJECT IDENTIFIER ::= { integrated 2 }
-iemStatus OBJECT IDENTIFIER ::= { integrated 3 }
-
-emsIdent OBJECT IDENTIFIER ::= { envMgtSystem 1 }
-
-emsOutputRelayControl OBJECT IDENTIFIER ::= { envMgtSystem 2 }
-emsOutletControl OBJECT IDENTIFIER ::= { envMgtSystem 3 }
-emsSensorControl OBJECT IDENTIFIER ::= { envMgtSystem 4 }
-emsAlarmDeviceControl OBJECT IDENTIFIER ::= { envMgtSystem 5 }
-
-emsConfig OBJECT IDENTIFIER ::= { envMgtSystem 6 }
-emsProbeConfig OBJECT IDENTIFIER ::= { envMgtSystem 7 }
-emsInputContactConfig OBJECT IDENTIFIER ::= { envMgtSystem 8 }
-emsOutputRelayConfig OBJECT IDENTIFIER ::= { envMgtSystem 9 }
-emsOutletConfig OBJECT IDENTIFIER ::= { envMgtSystem 10 }
-emsSensorConfig OBJECT IDENTIFIER ::= { envMgtSystem 11 }
-
-emsStatus OBJECT IDENTIFIER ::= { envMgtSystem 12 }
-emsProbeStatus OBJECT IDENTIFIER ::= { envMgtSystem 13 }
-emsInputContactStatus OBJECT IDENTIFIER ::= { envMgtSystem 14 }
-emsOutputRelayStatus OBJECT IDENTIFIER ::= { envMgtSystem 15 }
-emsOutletStatus OBJECT IDENTIFIER ::= { envMgtSystem 16 }
-emsAlarmDeviceStatus OBJECT IDENTIFIER ::= { envMgtSystem 17 }
-emsSensorStatus OBJECT IDENTIFIER ::= { envMgtSystem 18 }
-
-nlIdent OBJECT IDENTIFIER ::= { netlock 1 }
-nlStatus OBJECT IDENTIFIER ::= { netlock 2 }
-
-airFM OBJECT IDENTIFIER ::= { airConditioners 1 }
-airFMIdent OBJECT IDENTIFIER ::= { airFM 1 }
-airFMStatus OBJECT IDENTIFIER ::= { airFM 2 }
-airFMGroup OBJECT IDENTIFIER ::= { airFM 3 }
-
-airPA OBJECT IDENTIFIER ::= { airConditioners 2 }
-airPAIdent OBJECT IDENTIFIER ::= { airPA 1 }
-airPAStatus OBJECT IDENTIFIER ::= { airPA 2 }
-
-rARUIdent OBJECT IDENTIFIER ::= { rARU 1 }
-rARUConfig OBJECT IDENTIFIER ::= { rARU 2 }
-rARUStatus OBJECT IDENTIFIER ::= { rARU 3 }
-
-
--- object types
-
--- the products group
--- the experimental group
-
-
-
--- the apcmgmt group
--- the mconfig group
-
-mconfigNumTrapReceivers OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of managers to send traps to."
- ::= { mconfig 1 }
-
-mconfigTrapReceiverTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MconfigTrapReceiverEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of managers to send traps to. The number of
- entries is given by the value of mconfigNumTrapReceivers.
- Maximum number of Trap Receivers is four."
- ::= { mconfig 2 }
-
-mconfigTrapReceiverEntry OBJECT-TYPE
- SYNTAX MconfigTrapReceiverEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The managers to send traps to."
- INDEX { trapIndex}
- ::= { mconfigTrapReceiverTable 1 }
-
-MconfigTrapReceiverEntry ::=
- SEQUENCE {
- trapIndex
- INTEGER,
- receiverAddr
- IpAddress,
- communityString
- DisplayString,
- severity
- INTEGER,
- acceptThisReceiver
- INTEGER,
- receiveTrapType
- INTEGER
- }
-
-trapIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to a trap receiver entry."
- ::= { mconfigTrapReceiverEntry 1 }
-
-receiverAddr OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The IP address of the manager to send a trap to."
- ::= { mconfigTrapReceiverEntry 2 }
-
-communityString OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The community name to use in the trap when
- sent to the manager."
- ::= { mconfigTrapReceiverEntry 3 }
-
-severity OBJECT-TYPE
- SYNTAX INTEGER {
- information(1),
- warning(2),
- severe(3)
- }
- ACCESS read-only
- STATUS obsolete
- DESCRIPTION
- "The severity threshold of traps to send to the manager.
- traps are labeled in severity as informational(1), warning(2),
- severe(3). Only traps of equal or greater severity than
- this value are sent to the manager."
- ::= { mconfigTrapReceiverEntry 4 }
-
-acceptThisReceiver OBJECT-TYPE
- SYNTAX INTEGER {
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An entry will become active if yes, and will
- be deleted if no."
- ::= { mconfigTrapReceiverEntry 5 }
-
-
-receiveTrapType OBJECT-TYPE
- SYNTAX INTEGER {
- powernet (1),
- ietf (2),
- both (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The node in this entry will receive traps defined in APC
- PowerNet MIB, if this OID is set to yes."
- ::= { mconfigTrapReceiverEntry 6 }
-
-mconfigBOOTPEnabled OBJECT-TYPE
- SYNTAX INTEGER {
- yes (1),
- no (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of yes(1) indicates the PowerNet Adapter is configured to
- obtain its IP configuration parameters from a BOOTP server.
-
- The value of no(2) indicates adapter will assume IP configuration parameters
- values saved in adapter's eeprom, which was originally configured at local
- console."
- ::= { mconfig 3 }
-
-mconfigTFTPServerIP OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The IP address of TFTP server. If mconfigBOOTPEnabled is yes(1), then this IP address
- is provided by BOOTP server and not allowed to be modified; otherwise, this IP address
- can be modified.
-
- Before using TFTP to load new code image, the image file should be placed in proper
- directory of the specified TFTP server. This OID is only supported by AP9605, AP9205,
- and AP9603 PowerNet SNMP Adapters."
- ::= { mconfig 4 }
-
-newCodeAuthentViaTFTP OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- validNewAgentCodeImage (2),
- sameAgentCodeImage (3),
- invalidAgentCodeImage (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Once mcontrolRestartAgent is set to loadAndExecuteNewAgent (3), PowerNet adapter will
- start to load the remote image file, for authentication only, instead of saving the code
- into flash memory. Only if a validNewAgentCodeImage (1) is found will the agent reboot
- the PowerNet adapter and invoke the loader to load and save new code into the flash memory.
- Otherwise, the current agent code will continue to run.
-
- This OID shows the result of the above authentication process.
- validNewAgentCodeImage (1) means the code image on TFTP server
- is a valid APC agent code and is different version from the current agent.
- Once agent identifies this, loader will start to update flash memory with
- the new agent code.
-
- sameAgentCodeImage (2) means the code image on TFTP server is exactly the
- same as the currently running agent. Currently running agent will not invoke
- loader to load the same again.
-
- invalidAgentCodeImage (3) means the code image on TFTP server is NOT a valid
- APC agent code. Thus, current agent will not load it into the flash memory.
-
- The value of this OID will be associated with TRAP codeImageAuthentDone.
- This OID is only supported by AP9605, AP9205, and AP9603 PowerNet SNMP Adapters."
-
- ::= { mconfig 5 }
-
-mconfigClockDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The current date in the mm/dd/yyyy format. Example: 01/01/2000."
- ::= { mconfigClock 1 }
-
-mconfigClockTime OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The current time in the hh:mm:ss am/pm format. Example: 12:00:00 am."
- ::= { mconfigClock 2 }
-
-mcontrolRestartAgent OBJECT-TYPE
- SYNTAX INTEGER {
- restartCurrentAgent (1),
- continueCurrentAgent (2),
- loadAndExecuteNewAgent (3),
- restartWithoutAgent (4),
- resetNetworkAndRestart (5),
- resetNetworkLeaveModeAndRestart (6)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to restartCurrentAgent (1) will restart the same SNMP
- agent code currently saved in flash memory. Setting this OID to
- loadAndExecuteNewAgent (3) will enable adapter to load a new agent code
- into the flash memory and start to execute this new agent code.
- Bootp/tftp is the default protocol. loadAndExecuteNewAgent is only
- supported by AP9605, AP9205, and AP9603 PowerNet SNMP Adapters. Setting
- this OID to restartWithoutAgent (4) will restart the system and not
- start the agent. The subsequent time the system restarts the agent will
- also automatically restart. Setting this OID to
- resetNetworkAndRestart (5) will set the Boot Mode, IP Address, Subnet
- Mask, and Default Gateway to defaults, expire any existing DHCP lease
- and then restart the system. Setting this OID to
- resetNetworkLeaveModeAndRestart (6) will leave the Boot Mode at the
- current setting, set the IP Address, Subnet Mask, and Default Gateway to
- defaults, expire any existing DHCP lease and then restart the system."
-
- ::= { mcontrol 1 }
-
--- The mtrapargs group
--- These OIDs allows APC traps to be sent with additional arguments
--- which may not be defined in the APC MIB.
-
-mtrapargsInteger OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an integer argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 1 }
-
-mtrapargsIpAddress OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an IP address argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0.0.0.0."
- ::= { mtrapargs 2 }
-
-mtrapargsString OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an octet string argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return a NULL string."
- ::= { mtrapargs 3 }
-
-mtrapargsGauge OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with a Gauge argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 4 }
-
-mtrapargsTimeTicks OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with a TimeTicks argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 5 }
-
-mtrapargsInteger02 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an integer argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 6 }
-
-mtrapargsInteger03 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an integer argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 7 }
-
-mtrapargsIpAddress02 OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an IP address argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0.0.0.0."
- ::= { mtrapargs 8 }
-
-mtrapargsIpAddress03 OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an IP address argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0.0.0.0."
- ::= { mtrapargs 9 }
-
-mtrapargsString02 OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an octet string argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return a NULL string."
- ::= { mtrapargs 10 }
-
-mtrapargsString03 OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with an octet string argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return a NULL string."
- ::= { mtrapargs 11 }
-
-mtrapargsGauge02 OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with a Gauge argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 12 }
-
-mtrapargsGauge03 OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with a Gauge argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 13 }
-
-mtrapargsTimeTicks02 OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with a TimeTicks argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 14 }
-
-mtrapargsTimeTicks03 OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID allows APC traps to be sent with a TimeTicks argument
- that my not be defined in the APC MIB.
-
- A get of this OID will return 0."
- ::= { mtrapargs 15 }
-
--- the mfiletransfer group
--- the mfiletransferStatus group
-mfiletransferStatusLastTransferResult OBJECT-TYPE
- SYNTAX INTEGER {
- lastFileTransferResultSuccessful (1),
- lastFileTransferResultNotAvailable (2),
- lastFileTransferResultFailureUnknown (3),
- lastFileTransferResultFailureServerInaccessible (4),
- lastFileTransferResultFailureServerAccessDenied (5),
- lastFileTransferResultFailureFileNotFound (6),
- lastFileTransferResultFailureFileTypeUnknown (7),
- lastFileTransferResultFailureFileCorrupted (8)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Once mfiletransferControlInitiateFileTransfer is set to a value other than doNotInitiateFileTransfer
- a file transfer of mfiletransferConfigSettingsFilename will be attempted from either a TFTP or FTP
- server.
-
- This OID shows the last attempted file transfer result.
- lastFileTransferResultSuccessful (1) means the file transfer was successful.
- lastFileTransferResultNotAvailable (2) means that there have been no previous file transfers.
- lastFileTransferResultFailureUnknown (3) means that the last file transfer failed for an unknown reason.
- lastFileTransferResultFailureServerInaccessible (4) means that the TFTP or FTP server could not be found on the network.
- lastFileTransferResultFailureServerAccessDenied (5) means that the TFTP or FTP server denied access.
- lastFileTransferResultFailureFileNotFound (6) means that the file could not be located.
- lastFileTransferResultFailureFileTypeUnknown (7) means the file was examined, but the contents were unknown.
- lastFileTransferResultFailureFileCorrupt (8) means the transferred file was corrupt."
-
- ::= { mfiletransferStatus 1 }
-
--- the mfiletransferConfig group
--- the mfiletransferConfigSettings group
-
-mfiletransferConfigSettingsFilename OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The path and name of the file to transfer using the mfiletransferControlInitiateFileTransfer OID.
- If the file to transfer exists in the default server directory then the path may be omitted."
-
- ::= { mfiletransferConfigSettings 1 }
-
--- the mfiletransferConfigTFTP group
-
-mfiletransferConfigTFTPServerAddress OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The IP Address in dotted decimal notation of the TFTP server involved in the file transfer."
-
- ::= { mfiletransferConfigTFTP 1 }
-
--- the mfiletransferConfigFTP group
-
-mfiletransferConfigFTPServerAddress OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The IP Address in dotted decimal notation of the FTP server involved in the file transfer."
-
- ::= { mfiletransferConfigFTP 1 }
-
-mfiletransferConfigFTPServerUser OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The user identification for logging into the FTP server specified with mfiletransferConfigFTPServerAddress."
-
- ::= { mfiletransferConfigFTP 2 }
-
-mfiletransferConfigFTPServerPassword OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The password for logging into the FTP server specified with mfiletransferConfigFTPServerAddress."
-
- ::= { mfiletransferConfigFTP 3 }
-
--- the mfiletransferControl group
-
-mfiletransferControlInitiateFileTransfer OBJECT-TYPE
- SYNTAX INTEGER {
- doNotInitiateFileTransfer (1),
- initiateFileTransferDownloadViaTFTP (2),
- initiateFileTransferDownloadViaFTP (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to doNotInitiateFileTransfer (1) will do nothing.
-
- Setting this OID to initiateFileTransferDownloadViaTFTP (2) will attempt to transfer the file named in
- mfiletransferConfigSettingsFilename from the TFTP Server identified in mfiletransferConfigTFTPAddress.
-
- Setting this OID to initiateFileTransferDownloadViaFTP (3) will attempt to transfer the file named in
- mfiletransferConfigSettingsFilename from the FTP Server identified in mfiletransferConfigFTPAddress
- using mfiletransferConfigFTPUser and mfiletransferConfigFTPPassword for the FTP Server login process."
-
- ::= { mfiletransferControl 1 }
-
--- the battManIdent group
-
-battManIdentProductName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the battery manager."
- ::= { battManIdent 1 }
-
-battManIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery manager network interface hardware revision.
- This value is set at the factory."
- ::= { battManIdent 2 }
-
-battManIdentFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery manager network interface firmware revision.
- This value is set at the factory and can change with firmware update."
- ::= { battManIdent 3 }
-
-battManIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date the battery manager was manufactured in mm/dd/yyyy format.
- This value is set at the factory."
- ::= { battManIdent 4 }
-
-battManIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery manager model number character string.
- This value is set at the factory."
- ::= { battManIdent 5 }
-
-battManIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery manager serial number character string.
- This value is set at the factory."
- ::= { battManIdent 6 }
-
--- the battManCalib group
--- system calibration
-
-battManOhmicValueCorrectionFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The system ohmic value correction factor in percent."
- ::= { battManSystemCalib 1 }
-
--- unit calibration
-
-battManUnitCalibTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManUnitCalibTable."
- ::= { battManUnitCalib 1 }
-
-battManUnitCalibTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManUnitCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting calibration information from each unit in the system."
- ::= { battManUnitCalib 2 }
-
-battManUnitCalibTableEntry OBJECT-TYPE
- SYNTAX BattManUnitCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The unit to get data from."
- INDEX { battManUnitCalibIndex }
- ::= { battManUnitCalibTable 1 }
-
-BattManUnitCalibTableEntry ::=
- SEQUENCE {
- battManUnitCalibIndex INTEGER,
- battManUnitSerialNumber DisplayString,
- battManBatteryVoltageZeroCalib INTEGER,
- battManBatteryVoltageSpanCalib INTEGER
- }
-
-battManUnitCalibIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of unit calibration entries in the table."
- ::= { battManUnitCalibTableEntry 1 }
-
-battManUnitSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the unit."
- ::= { battManUnitCalibTableEntry 2 }
-
-battManBatteryVoltageZeroCalib OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The unit battery voltage zero calibration in millivolts."
- ::= { battManUnitCalibTableEntry 3 }
-
-battManBatteryVoltageSpanCalib OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The unit battery voltage span calibration in percent."
- ::= { battManUnitCalibTableEntry 4 }
-
--- string calibration table
-
-battManStringCalibTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManStringCalibTable."
- ::= { battManStringCalib 1 }
-
-battManStringCalibTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManStringCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting calibration information from each string in the system."
- ::= { battManStringCalib 2 }
-
-battManStringCalibTableEntry OBJECT-TYPE
- SYNTAX BattManStringCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManStringCalibIndex }
- ::= { battManStringCalibTable 1 }
-
-BattManStringCalibTableEntry ::=
- SEQUENCE {
- battManStringCalibIndex INTEGER,
- battManDCCurrentZeroCalib INTEGER,
- battManACCurrentZeroCalib INTEGER,
- battManProbeRange INTEGER
- }
-
-battManStringCalibIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of string calibration entries in the table."
- ::= { battManStringCalibTableEntry 1 }
-
-battManDCCurrentZeroCalib OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The string DC current zero calibration in tenths of amps."
- ::= { battManStringCalibTableEntry 2 }
-
-battManACCurrentZeroCalib OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The string AC current zero calibration in tenths of amps."
- ::= { battManStringCalibTableEntry 3 }
-
-battManProbeRange OBJECT-TYPE
- SYNTAX INTEGER {
- amps1000 (1),
- amps500 (2),
- amps100 (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The string probe range in amps."
- ::= { battManStringCalibTableEntry 4 }
-
---string 1 battery calibration table
-
-battManString1BatteryCalibTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString1BatteryCalibTable."
- ::= { battManBatteryCalib 1 }
-
-battManString1BatteryCalibTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString1BatteryCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting calibration information from each battery in String 1."
- ::= { battManBatteryCalib 2 }
-
-battManString1BatteryCalibTableEntry OBJECT-TYPE
- SYNTAX BattManString1BatteryCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString1BatteryCalibIndex }
- ::= { battManString1BatteryCalibTable 1 }
-
-BattManString1BatteryCalibTableEntry ::=
- SEQUENCE {
- battManString1BatteryCalibIndex INTEGER,
- battManString1BatteryInterTierOhmicValue INTEGER
- }
-
-battManString1BatteryCalibIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of battery calibration entries in the table."
- ::= { battManString1BatteryCalibTableEntry 1 }
-
-battManString1BatteryInterTierOhmicValue OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The battery inter-tier ohmic value in ohms. This corresponds to the ohmic
- value for the positive terminal of the battery."
- ::= { battManString1BatteryCalibTableEntry 2 }
-
---string 2 battery calibration table
-
-battManString2BatteryCalibTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString2BatteryCalibTable."
- ::= { battManBatteryCalib 3 }
-
-battManString2BatteryCalibTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString2BatteryCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting calibration information from each battery in String 2."
- ::= { battManBatteryCalib 4 }
-
-battManString2BatteryCalibTableEntry OBJECT-TYPE
- SYNTAX BattManString2BatteryCalibTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString2BatteryCalibIndex }
- ::= { battManString2BatteryCalibTable 1 }
-
-BattManString2BatteryCalibTableEntry ::=
- SEQUENCE {
- battManString2BatteryCalibIndex INTEGER,
- battManString2BatteryInterTierOhmicValue INTEGER
- }
-
-battManString2BatteryCalibIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of battery calibration entries in the table."
- ::= { battManString2BatteryCalibTableEntry 1 }
-
-battManString2BatteryInterTierOhmicValue OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The battery inter-tier ohmic value in ohms."
- ::= { battManString2BatteryCalibTableEntry 2 }
-
--- the battManConfig group
-
-battManConfigApplication OBJECT-TYPE
- SYNTAX INTEGER {
- silcon (1),
- other (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The type of application the battery manager is installed on:
- Silcon(1) Silcon UPS or
- Other(2) Other UPS/Charger."
- ::= { battManConfig 1 }
-
-battManConfigBatteryChemistry OBJECT-TYPE
- SYNTAX INTEGER {
- leadAcid (1),
- nickel-Cadmium (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The battery chemistry of the monitored batteries:
- LeadAcid(1) Lead Acid or
- Nickel-Cadmium(2) Nickel-Cadmium."
- ::= { battManConfig 2 }
-
-battManConfigBatteryAHCapacity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amp hour capacity of the monitored batteries 5-2000 AH."
- ::= { battManConfig 3 }
-
-battManConfigNumberofStrings OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The number of strings in the battery manager system (1 - 2 Silcon)/(1 Other)."
- ::= { battManConfig 4 }
-
-battManConfigBatteriesperString OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The number of batteries per string."
- ::= { battManConfig 5 }
-
-battManConfigCellsperBattery OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The number of cells per battery (1 - 6 for lead-acid, 1 - 2 for NiCd."
- ::= { battManConfig 6 }
-
-battManConfigMinCellVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The minimum battery cell voltage alarm limit in millivolts DC."
- ::= { battManConfig 7 }
-
-battManConfigMaxCellVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum battery cell voltage alarm limit in millivolts DC."
- ::= { battManConfig 8 }
-
-battManConfigMaxPilotTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum pilot battery temperature alarm limit in tenths of degrees Fahrenheit."
- ::= { battManConfig 9 }
-
-battManConfigMaxPilotTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum pilot battery temperature alarm limit in tenths of degrees Celcius."
- ::= { battManConfig 10 }
-
-battManConfigMaxAmbientTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum ambient temperature alarm limit in tenths of degrees Fahrenheit."
- ::= { battManConfig 11 }
-
-battManConfigMaxAmbientTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum ambient temperature alarm limit in tenths of degrees Celcius."
- ::= { battManConfig 12 }
-
-battManConfigMinAmbientTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The Minimum Ambient Temperature alarm limit in tenths of degrees Fahrenheit."
- ::= { battManConfig 13 }
-
-battManConfigMinAmbientTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The Minimum Ambient Temperature alarm limit in tenths of degrees Celcius."
- ::= { battManConfig 14 }
-
-battManConfigMaxRippleCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum ripple current alarm limit for the monitored battery
- strings in percent of AH capacity."
- ::= { battManConfig 15 }
-
-battManConfigMaxCurrentAcceptanceDeviation OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum current acceptance deviation alarm limit in percentage."
- ::= { battManConfig 16 }
-
-battManConfigMonitorWireLength OBJECT-TYPE
- SYNTAX INTEGER {
- fiftyFeetOrLess (1),
- moreThanFiftyFeet (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The monitor wire length:
- fiftyFeetOrLess (1) indicates that the wire length is less than or equal to 50 feet.
- moreThanFiftyFeet (2) indicates that the wire length is greater than 50 feet."
- ::= { battManConfig 17 }
-
-battManConfigDischargeVoltageAlarmLevel OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The discharge voltage alarm level in percent."
- ::= { battManConfig 18 }
-
-battManConfigAutoAnnunciatorReset OBJECT-TYPE
- SYNTAX INTEGER {
- disabled (1),
- enabled (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The annunciator output signal reset method:
- disabled(1) means the annunciator signal output will be reset when the reset button is pressed.
- enabled(2) means the annunciator will stop signalling when all alarm conditions clear."
- ::= { battManConfig 19 }
-
--- the battManAlarm group
-
-battManAlarmManagementController OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Management Controller Alarm is :
- normal(1) no alarm condtions identified
- alarm(2) an alarm condition exits."
- ::= { battManAlarm 1 }
-
-battManAlarmBatteries OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Batteries Alarm is :
- normal(1) no alarm condtions identified
- alarm(2) an alarm condition exits."
- ::= { battManAlarm 2 }
-
-battManAlarmCharger OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Charger Alarm is :
- normal(1) no alarm condtions identified
- alarm(2) an alarm condition exits."
- ::= { battManAlarm 3 }
-
-battManAlarmEnvironment OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Environment Alarm is :
- normal(1) no alarm condtions identified
- alarm(2) an alarm condition exits."
- ::= { battManAlarm 4 }
-
--- the battManSystemStatus group
-
--- These are system wide parameters
-
-battManSystemAmbientTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system ambient temperture in tenths of degrees Celcius."
- ::= { battManSystemStatus 1 }
-
-battManSystemAmbientTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system ambient temperture in tenths of degrees Fahrenheit."
- ::= { battManSystemStatus 2 }
-
-battManSystemPilotTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system pilot temperature in tenths of degrees Celcius."
- ::= { battManSystemStatus 3 }
-
-battManSystemPilotTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system pilot temperature in tenths of degrees Fahrenheit."
- ::= { battManSystemStatus 4 }
-
-battManSystemAmbientHighTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the system has a high temperature alarm."
- ::= { battManSystemStatus 5 }
-
-battManSystemAmbientLowTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the system has a low temperature alarm."
- ::= { battManSystemStatus 6 }
-
-battManSystemPilotBatteryHighTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the system has a pilot battery high temperature alarm."
- ::= { battManSystemStatus 7 }
-
-battManSystemPilotProbeDisconnected OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the system pilot probe is disconnected."
- ::= { battManSystemStatus 8 }
-
-battManSystemAmbientProbeDisconnected OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the system ambient probe is disconnected."
- ::= { battManSystemStatus 9 }
-
--- This is a table of input contact parameters
-
-battManInputContactTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManContactTable."
- ::= { battManInputContactStatus 1 }
-
-battManInputContactTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManInputContactTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting information from each contact
- in the system. "
- ::= { battManInputContactStatus 2 }
-
-battManInputContactTableEntry OBJECT-TYPE
- SYNTAX BattManInputContactTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The contact to get data from."
- INDEX { battManInputContactIndex }
- ::= { battManInputContactTable 1 }
-
-BattManInputContactTableEntry ::=
- SEQUENCE {
- battManInputContactIndex INTEGER,
- battManInputContactName DisplayString,
- battManInputContactAlarmState INTEGER,
- battManInputContactState INTEGER,
- battManInputContactNormalState INTEGER,
- battManInputContactAlarmDelay INTEGER
- }
-
-battManInputContactIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of contact entries in the table."
- ::= { battManInputContactTableEntry 1 }
-
-battManInputContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the input contact."
- ::= { battManInputContactTableEntry 2 }
-
-battManInputContactAlarmState OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the alarm condition is active for this contact."
- ::= { battManInputContactTableEntry 3 }
-
-battManInputContactState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to open(1), the input contact is in the open state.
- When set to closed(2), the input contact is in the closed state."
- ::= { battManInputContactTableEntry 4 }
-
-battManInputContactNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to open(1), the input contact is normally open.
- When set to closed(2), the input contact is normally closed."
- ::= { battManInputContactTableEntry 5 }
-
-battManInputContactAlarmDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The alarm delay time in seconds."
- ::= { battManInputContactTableEntry 6 }
-
--- This is a table of battery string parameters
-
-battManStringTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManStringTable."
- ::= { battManStringStatus 1 }
-
-battManStringTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManStringTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting information from each string
- in the system. "
- ::= { battManStringStatus 2 }
-
-battManStringTableEntry OBJECT-TYPE
- SYNTAX BattManStringTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManStringIndex }
- ::= { battManStringTable 1 }
-
-BattManStringTableEntry ::=
- SEQUENCE {
- battManStringIndex INTEGER,
- battManStringCurrent INTEGER,
- battManStringRippleCurrent INTEGER,
- battManStringChargerHighVoltageAlarm INTEGER,
- battManStringChargerLowVoltageAlarm INTEGER,
- battManStringCurrentProbeDisconnected INTEGER,
- battManStringOnBattery INTEGER
- }
-
-battManStringIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of string entries in the table."
- ::= { battManStringTableEntry 1 }
-
-battManStringCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The string current in tenths of Amps."
- ::= { battManStringTableEntry 2 }
-
-battManStringRippleCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The string ripple current in tenths of Amps."
- ::= { battManStringTableEntry 3 }
-
-battManStringChargerHighVoltageAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the string charger has a high voltage alarm."
- ::= { battManStringTableEntry 4 }
-
-battManStringChargerLowVoltageAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the string charger has a low voltage alarm."
- ::= { battManStringTableEntry 5 }
-
-battManStringCurrentProbeDisconnected OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the string charger probe is disconnected."
- ::= { battManStringTableEntry 6 }
-
-battManStringOnBattery OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that the string is in the on-battery state."
- ::= { battManStringTableEntry 7 }
-
--- the battManString1BatteryStatus group
-
-battManString1BatteryTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString1BatteryStatusTable."
- ::= { battManBatteryStatus 1 }
-
-battManString1BatteryTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString1BatteryTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting information from each string
- in the system. "
- ::= { battManBatteryStatus 2 }
-
-battManString1BatteryTableEntry OBJECT-TYPE
- SYNTAX BattManString1BatteryTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString1BatteryIndex }
- ::= { battManString1BatteryTable 1 }
-
-BattManString1BatteryTableEntry ::=
- SEQUENCE {
- battManString1BatteryIndex INTEGER,
- battManString1BatteryVoltage INTEGER,
- battManString1BatteryLowestVoltage INTEGER,
- battManString1BatteryCellShorted INTEGER,
- battManString1BatteryOpenFuseOrConnection INTEGER,
- battManString1BatteryLowCapacity INTEGER,
- battManString1BatteryHighOhmicValue INTEGER,
- battManString1BatteryThermalRunaway INTEGER,
- battManString1BatteryDryout INTEGER
- }
-
-battManString1BatteryIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of string entries in the table."
- ::= { battManString1BatteryTableEntry 1 }
-
-battManString1BatteryVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery voltage in milli VDC."
- ::= { battManString1BatteryTableEntry 2 }
-
-battManString1BatteryLowestVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The lowest battery discharge voltage during the last power event in milli VDC."
- ::= { battManString1BatteryTableEntry 3 }
-
-battManString1BatteryCellShorted OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that a battery cell is shorted."
- ::= { battManString1BatteryTableEntry 4 }
-
-battManString1BatteryOpenFuseOrConnection OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that a fuse or connection is open."
- ::= { battManString1BatteryTableEntry 5 }
-
-battManString1BatteryLowCapacity OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has low capacity."
- ::= { battManString1BatteryTableEntry 6 }
-
-battManString1BatteryHighOhmicValue OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has a high ohmic value."
- ::= { battManString1BatteryTableEntry 7 }
-
-battManString1BatteryThermalRunaway OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has a thermal runaway condition."
- ::= { battManString1BatteryTableEntry 8 }
-
-battManString1BatteryDryout OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has a dryout condition."
- ::= { battManString1BatteryTableEntry 9 }
-
--- the battManString2BatteryStatus group
-
-battManString2BatteryTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString2BatteryStatusTable."
- ::= { battManBatteryStatus 3 }
-
-battManString2BatteryTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString2BatteryTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting information from each string
- in the system. "
- ::= { battManBatteryStatus 4 }
-
-battManString2BatteryTableEntry OBJECT-TYPE
- SYNTAX BattManString2BatteryTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString2BatteryIndex }
- ::= { battManString2BatteryTable 1 }
-
-BattManString2BatteryTableEntry ::=
- SEQUENCE {
- battManString2BatteryIndex INTEGER,
- battManString2BatteryVoltage INTEGER,
- battManString2BatteryLowestVoltage INTEGER,
- battManString2BatteryCellShorted INTEGER,
- battManString2BatteryOpenFuseOrConnection INTEGER,
- battManString2BatteryLowCapacity INTEGER,
- battManString2BatteryHighOhmicValue INTEGER,
- battManString2BatteryThermalRunaway INTEGER,
- battManString2BatteryDryout INTEGER
- }
-
-battManString2BatteryIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of string entries in the table."
- ::= { battManString2BatteryTableEntry 1 }
-
-battManString2BatteryVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery voltage in milli VDC."
- ::= { battManString2BatteryTableEntry 2 }
-
-battManString2BatteryLowestVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The lowest battery discharge voltage during the last power event in milli VDC."
- ::= { battManString2BatteryTableEntry 3 }
-
-battManString2BatteryCellShorted OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that a battery cell is shorted."
- ::= { battManString2BatteryTableEntry 4 }
-
-battManString2BatteryOpenFuseOrConnection OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates that a fuse or connection is open."
- ::= { battManString2BatteryTableEntry 5 }
-
-battManString2BatteryLowCapacity OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has low capacity."
- ::= { battManString2BatteryTableEntry 6 }
-
-battManString2BatteryHighOhmicValue OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has a high ohmic value."
- ::= { battManString2BatteryTableEntry 7 }
-
-battManString2BatteryThermalRunaway OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has a thermal runaway condition."
- ::= { battManString2BatteryTableEntry 8 }
-
-battManString2BatteryDryout OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- alarm (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When set to alarm(2), indicates a battery has a dryout condition."
- ::= { battManString2BatteryTableEntry 9 }
-
--- battery manager control group
-battManRemoteAnnunciatorReset OBJECT-TYPE
- SYNTAX INTEGER {
- noOperation (1),
- reset (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to reset(2) will reset the user interface annunciator.
- Getting this OID will do nothing and return the noOperation(1) value."
- ::= { battManControl 1 }
-
-battManResetChargeCurrentDeviationBenchmark OBJECT-TYPE
- SYNTAX INTEGER {
- noOperation (1),
- reset (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to reset(2) will reset the charge current deviation benchmark.
- Getting this OID will do nothing and return the noOperation(1) value."
- ::= { battManControl 2 }
-
-battManResetLowestDischargeVoltages OBJECT-TYPE
- SYNTAX INTEGER {
- noOperation (1),
- reset (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to reset(2) will reset the lowest discharge voltages.
- Getting this OID will do nothing and return the noOperation(1) value."
- ::= { battManControl 3 }
-
--- the battManTestResults group
-
---string 1 test results table
-
-battManString1OhmicValueLastDischargeInfo OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Informational text showing the date/time, load, and pilot temperature for the string
- during the last discharge when ohmic values were recorded."
- ::= { battManTestResults 1 }
-
-battManString1OhmicValueTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString1OhmicValueTable."
- ::= { battManTestResults 2 }
-
-battManString1OhmicValueTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString1OhmicValueTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting ohmic value information from each battery in String 1."
- ::= { battManTestResults 3 }
-
-battManString1OhmicValueTableEntry OBJECT-TYPE
- SYNTAX BattManString1OhmicValueTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString1OhmicValueIndex }
- ::= { battManString1OhmicValueTable 1 }
-
-BattManString1OhmicValueTableEntry ::=
- SEQUENCE {
- battManString1OhmicValueIndex INTEGER,
- battManString1OhmicValueData INTEGER
- }
-
-battManString1OhmicValueIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery number."
- ::= { battManString1OhmicValueTableEntry 1 }
-
-battManString1OhmicValueData OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery inter-tier ohmic value in ohms.
- Note: Negative values are invalid and may indicate faulty calibration
- of ohmic value correction factors."
- ::= { battManString1OhmicValueTableEntry 2 }
-
-battManString1ResponseTestChangeTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString1ResponseTestChangeTable."
- ::= { battManTestResults 4 }
-
-battManString1ResponseTestChangeTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString1ResponseTestChangeTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting response test change information from each battery in String 1."
- ::= { battManTestResults 5 }
-
-battManString1ResponseTestChangeTableEntry OBJECT-TYPE
- SYNTAX BattManString1ResponseTestChangeTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString1ResponseTestChangeIndex }
- ::= { battManString1ResponseTestChangeTable 1 }
-
-BattManString1ResponseTestChangeTableEntry ::=
- SEQUENCE {
- battManString1ResponseTestChangeIndex INTEGER,
- battManString1ResponseTestChangeData INTEGER
- }
-
-battManString1ResponseTestChangeIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of the entries in the table."
- ::= { battManString1ResponseTestChangeTableEntry 1 }
-
-battManString1ResponseTestChangeData OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery response test change in percent."
- ::= { battManString1ResponseTestChangeTableEntry 2 }
-
-battManString2OhmicValueLastDischargeInfo OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Informational text showing the date/time, load, and pilot temperature for the string
- during the last discharge when ohmic values were recorded."
- ::= { battManTestResults 6 }
-
-battManString2OhmicValueTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString2OhmicValueTable."
- ::= { battManTestResults 7 }
-
-battManString2OhmicValueTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString2OhmicValueTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting ohmic value information from each battery in String 1."
- ::= { battManTestResults 8 }
-
-battManString2OhmicValueTableEntry OBJECT-TYPE
- SYNTAX BattManString2OhmicValueTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString2OhmicValueIndex }
- ::= { battManString2OhmicValueTable 1 }
-
-BattManString2OhmicValueTableEntry ::=
- SEQUENCE {
- battManString2OhmicValueIndex INTEGER,
- battManString2OhmicValueData INTEGER
- }
-
-battManString2OhmicValueIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of battery calibration entries in the table."
- ::= { battManString2OhmicValueTableEntry 1 }
-
-battManString2OhmicValueData OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery inter-tier ohmic value in ohms.
- Note: Negative values are invalid and may indicate faulty calibration
- of ohmic value correction factors."
- ::= { battManString2OhmicValueTableEntry 2 }
-
-battManString2ResponseTestChangeTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the battManString2ResponseTestChangeTable."
- ::= { battManTestResults 9 }
-
-battManString2ResponseTestChangeTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BattManString2ResponseTestChangeTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting response test change information from each battery in String 1."
- ::= { battManTestResults 10 }
-
-battManString2ResponseTestChangeTableEntry OBJECT-TYPE
- SYNTAX BattManString2ResponseTestChangeTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The string to get data from."
- INDEX { battManString2ResponseTestChangeIndex }
- ::= { battManString2ResponseTestChangeTable 1 }
-
-BattManString2ResponseTestChangeTableEntry ::=
- SEQUENCE {
- battManString2ResponseTestChangeIndex INTEGER,
- battManString2ResponseTestChangeData INTEGER
- }
-
-battManString2ResponseTestChangeIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of the entries in the table."
- ::= { battManString2ResponseTestChangeTableEntry 1 }
-
-battManString2ResponseTestChangeData OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery response test change in percent."
- ::= { battManString2ResponseTestChangeTableEntry 2 }
-
--- the xPDUIdent group
-
-xPDUIdentProductName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the PDU."
- ::= { xPDUIdent 1 }
-
-xPDUIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the PDU.
- This value is set at the factory."
- ::= { xPDUIdent 2 }
-
-xPDUIdentFirmwareAppRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ID string identifying the application firmware revision of the PDU."
- ::= { xPDUIdent 3 }
-
-xPDUIdentFirmwareAppOSRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ID string identifying the application operating system firmware revision of the PDU."
- ::= { xPDUIdent 4 }
-
-xPDUIdentFirmwareControllerRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ID string identifying the PDU controller firmware revision."
- ::= { xPDUIdent 5 }
-
-xPDUIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the PDU was manufactured in mm/dd/yyyy format.
- This value is set at the factory."
- ::= { xPDUIdent 6 }
-
-xPDUIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the model number of
- the PDU. This value is set at the factory."
- ::= { xPDUIdent 7 }
-
-xPDUIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the serial number of
- the PDU. This value is set at the factory."
- ::= { xPDUIdent 8 }
-
--- the xPDUDevice group
-
-xPDUDeviceNominalMainInputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The nominal main input voltage to the PDU.
- Measured in Volts, line-to-line for a delta service or
- line-to-neutral for a wye service."
- ::= { xPDUDevice 1 }
-
-xPDUDeviceServiceType OBJECT-TYPE
- SYNTAX INTEGER {
- delta (1),
- wye (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of utility input to the PDU. Either 3 wires (delta), or 4 wires (wye)."
- ::= { xPDUDevice 2 }
-
-xPDUDeviceNominalOutputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The nominal line-to-neutral output voltage to the load measured in Volts."
- ::= { xPDUDevice 3 }
-
-xPDUDeviceMainInputBreakerRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The rating of the main input breaker measured in Amps."
- ::= { xPDUDevice 4 }
-
-xPDUDevicePanelBreakerRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The rating of the panel breaker measured in Amps."
- ::= { xPDUDevice 5 }
-
-xPDUDeviceTransformerPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not a transformer is installed in the PDU."
- ::= { xPDUDevice 6 }
-
-xPDUDeviceLoadTieBreakerPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not a load tie breaker is installed in the PDU."
- ::= { xPDUDevice 7 }
-
-xPDUDeviceLoadTestPortPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not a load test port is installed in the PDU."
- ::= { xPDUDevice 8 }
-
-xPDUDeviceFusesPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not the UPS feed from the PDU includes fuses."
- ::= { xPDUDevice 9 }
-
-xPDUDeviceFansPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not cooling fans are installed in the PDU."
- ::= { xPDUDevice 10 }
-
-xPDUDeviceBypassInputPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not the PDU is equipped with a second feed for
- the UPS's bypass input."
- ::= { xPDUDevice 11 }
-
-xPDUDeviceCrossTieOutputPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not the PDU is equipped with a cross-tie output."
- ::= { xPDUDevice 12 }
-
-xPDUDeviceEarthGroundMonitorPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not the PDU can provide ground current measurements."
- ::= { xPDUDevice 13 }
-
-xPDUDeviceInfraXureType OBJECT-TYPE
- SYNTAX INTEGER {
- typeB (1),
- typeC (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the configuration of this PDU system.
- Type-B PDU is in a distributed UPS system and has bypass capabilities.
- Type-C PDU receives power from a larger central UPS."
- ::= { xPDUDevice 14 }
-
--- Main Input
-
-xPDUMainInputOverVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..30)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which an input over voltage condition will be generated.
- Specified as percent deviation from nominal."
- ::= { xPDUMainInput 1 }
-
-xPDUMainInputUnderVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..30)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which an input under voltage condition will be generated.
- Specified as percent deviation from nominal."
- ::= { xPDUMainInput 2 }
-
--- Main Input Voltage Table
-
-xPDUMainInputVoltageTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Main input voltage entries."
- ::= { xPDUMainInput 3 }
-
-xPDUMainInputVoltageTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUMainInputVoltagePhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of input voltage table entries. The number of
- entries are the phase entries.
- The number of entries is contained in the
- xPDUMainInputVoltageTableSize OID."
- ::= { xPDUMainInput 4 }
-
- xPDUMainInputVoltagePhaseEntry OBJECT-TYPE
- SYNTAX XPDUMainInputVoltagePhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular main input voltage phase."
- INDEX { xPDUMainInputVoltagePhaseIndex }
- ::= { xPDUMainInputVoltageTable 1 }
-
- XPDUMainInputVoltagePhaseEntry ::= SEQUENCE {
- xPDUMainInputVoltagePhaseIndex INTEGER,
- xPDUMainInputVoltageLtoL INTEGER,
- xPDUMainInputVoltageLtoN INTEGER
- }
-
- xPDUMainInputVoltagePhaseIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each input phase entry in the table."
- ::= { xPDUMainInputVoltagePhaseEntry 1 }
-
- xPDUMainInputVoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-line PDU input voltage when an isolation transformer is present,
- or -1 if no transformer present in this PDU. Measured in tenths of Volts."
- ::= { xPDUMainInputVoltagePhaseEntry 2 }
-
- xPDUMainInputVoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-neutral PDU input voltage when an isolation transformer is not present,
- or -1 if a transformer is present in this PDU. Measured in tenths of Volts."
- ::= { xPDUMainInputVoltagePhaseEntry 3 }
-
-
-xPDUBypassInputOverVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..30)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which a bypass input over voltage condition will be generated.
- Specified as percent deviation from nominal."
- ::= { xPDUBypassInput 1 }
-
-xPDUBypassInputUnderVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..30)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which an bypass input under voltage condition will be generated.
- Specified as percent deviation from nominal."
- ::= { xPDUBypassInput 2 }
-
--- Bypass Input Voltage Table
-
-xPDUBypassInputVoltageTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bypass input voltage entries."
- ::= { xPDUBypassInput 3 }
-
-xPDUBypassInputVoltageTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUBypassInputVoltagePhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output table entries. The number of
- entries are the phase entries.
- The number of entries is contained in the
- xPDUBypassInputVoltageTableSize OID."
- ::= { xPDUBypassInput 4 }
-
- xPDUBypassInputVoltagePhaseEntry OBJECT-TYPE
- SYNTAX XPDUBypassInputVoltagePhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular bypass input voltage phase."
- INDEX { xPDUBypassInputVoltagePhaseIndex }
- ::= { xPDUBypassInputVoltageTable 1 }
-
- XPDUBypassInputVoltagePhaseEntry ::= SEQUENCE {
- xPDUBypassInputVoltagePhaseIndex INTEGER,
- xPDUBypassInputVoltageLtoL INTEGER,
- xPDUBypassInputVoltageLtoN INTEGER
- }
-
- xPDUBypassInputVoltagePhaseIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of each bypass input phase entry in the table."
- ::= { xPDUBypassInputVoltagePhaseEntry 1 }
-
- xPDUBypassInputVoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-line bypass input voltage, or -1 if no bypass
- feed is present in this PDU. Measured in tenths of Volts"
- ::= { xPDUBypassInputVoltagePhaseEntry 2 }
-
- xPDUBypassInputVoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-neutral bypass input voltage, or -1 if no bypass
- feed is present in this PDU. Measured in tenths of Volts"
- ::= { xPDUBypassInputVoltagePhaseEntry 3 }
-
--- UPS Input Table
-
-xPDUUPSInputVoltageTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of UPS input voltage entries."
- ::= { xPDUUPSInput 1 }
-
-xPDUUPSInputVoltageTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUUPSInputVoltagePhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of UPS input table entries. The number of
- entries are the phase entries.
- The number of entries is contained in the
- xPDUUPSInputVoltageTableSize OID."
- ::= { xPDUUPSInput 2 }
-
- xPDUUPSInputVoltagePhaseEntry OBJECT-TYPE
- SYNTAX XPDUUPSInputVoltagePhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular UPS input voltage phase."
- INDEX { xPDUUPSInputVoltagePhaseIndex }
- ::= { xPDUUPSInputVoltageTable 1 }
-
- XPDUUPSInputVoltagePhaseEntry ::= SEQUENCE {
- xPDUUPSInputVoltagePhaseIndex INTEGER,
- xPDUUPSInputVoltageLtoNPresent INTEGER
- }
-
- xPDUUPSInputVoltagePhaseIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each UPS input phase entry in the table."
- ::= { xPDUUPSInputVoltagePhaseEntry 1 }
-
- xPDUUPSInputVoltageLtoNPresent OBJECT-TYPE
- SYNTAX INTEGER {
- notPresent (1),
- present (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not voltage is present at the UPS feed."
- ::= { xPDUUPSInputVoltagePhaseEntry 2 }
-
--- System Output
-
-xPDUSystemOutputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system output frequency in tenths of Hertz."
- ::= { xPDUSystemOutput 1 }
-
-xPDUSystemOutputNeutralCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Shows the neutral current measured at the system output in tenths of Amps."
- ::= { xPDUSystemOutput 2 }
-
-xPDUSystemOutputTotalPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Shows the total system output power in tenths of kW."
- ::= { xPDUSystemOutput 3 }
-
-xPDUSystemOutputTotalApparentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Shows the total system output power in tenths of kVA."
- ::= { xPDUSystemOutput 4 }
-
-xPDUSystemOutputTotalPowerFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the total power factor of the system output.
- A value of 100 representing a unity power factor (1.00).
- Measured in hundredths."
- ::= { xPDUSystemOutput 5 }
-
-xPDUSystemOutputFrequencyTolerance OBJECT-TYPE
- SYNTAX INTEGER{
- freqToleranceOff (1),
- freqTolerancePointTwo (2),
- freqTolerancePointFive (3),
- freqToleranceOne (4),
- freqToleranceOnePointFive (5),
- freqToleranceTwo (6),
- freqToleranceThree (7),
- freqToleranceFour (8),
- freqToleranceFive (9),
- freqToleranceNine (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Shows the circuit panel output frequency tolerance in Hertz."
- ::= { xPDUSystemOutput 6 }
-
-xPDUSystemOutputMaxKWPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Defines 100% load in kW.
- Purpose is to set to match UPS capabilities."
- ::= { xPDUSystemOutput 7 }
-
-xPDUSystemOutputOverVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..30)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which an output over voltage condition will be generated.
- Specified as percent deviation from nominal."
- ::= { xPDUSystemOutput 8 }
-
-xPDUSystemOutputUnderVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..30)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which an output under voltage condition will be generated.
- Specified as percent deviation from nominal."
- ::= { xPDUSystemOutput 9 }
-
-
-xPDUSystemOutputOverCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which an over current condition will be generated.
- Specified as a percent of the panel breaker rating."
- ::= { xPDUSystemOutput 10 }
-
-xPDUSystemOutputOverCurrentNeutralThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which an Over current neutral condition will be generated.
- Specified as a percent of the panel breaker rating."
- ::= { xPDUSystemOutput 11 }
-
-xPDUSystemOutputUnderCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which an under current condition will be generated.
- Specified as a percent of the panel breaker rating."
- ::= { xPDUSystemOutput 12 }
-
-xPDUSystemOutputTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of System Output phase entries."
- ::= { xPDUSystemOutput 13 }
-
-xPDUSystemOutputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUSystemOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of system output table entries.
- The number of entries is contained in the
- xPDUSystemOutputTableSize OID."
- ::= { xPDUSystemOutput 14 }
-
- xPDUSystemOutputPhaseEntry OBJECT-TYPE
- SYNTAX XPDUSystemOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular system output phase."
- INDEX { xPDUSystemOutputPhaseIndex }
- ::= { xPDUSystemOutputTable 1 }
-
- XPDUSystemOutputPhaseEntry ::= SEQUENCE {
- xPDUSystemOutputPhaseIndex INTEGER,
- xPDUSystemOutputVoltageLtoL INTEGER,
- xPDUSystemOutputVoltageLtoN INTEGER,
- xPDUSystemOutputPhaseCurrent INTEGER,
- xPDUSystemOutputPower INTEGER,
- xPDUSystemOutputApparentPower INTEGER,
- xPDUSystemOutputPowerFactor INTEGER
- }
-
- xPDUSystemOutputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each output phase entry in the table."
- ::= { xPDUSystemOutputPhaseEntry 1 }
-
- xPDUSystemOutputVoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-line system output voltage available at the cicuit panel.
- Measured in tenths of Volts."
- ::= { xPDUSystemOutputPhaseEntry 2 }
-
- xPDUSystemOutputVoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-neutral system output voltage available at the cicuit panel.
- Measured in tenths of Volts."
- ::= { xPDUSystemOutputPhaseEntry 3 }
-
-
- xPDUSystemOutputPhaseCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System load current per phase. Measured in tenths of Amps."
- ::= { xPDUSystemOutputPhaseEntry 4 }
-
- xPDUSystemOutputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System output power per phase. Measured in tenths of kW."
- ::= { xPDUSystemOutputPhaseEntry 5 }
-
- xPDUSystemOutputApparentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System output power per phase. Measured in tenths of kVA."
- ::= { xPDUSystemOutputPhaseEntry 6 }
-
- xPDUSystemOutputPowerFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the Power Factor of the system output per phase.
- A value of 100 representing a unity Power Factor (1.00).
- Measured in hundredths."
- ::= { xPDUSystemOutputPhaseEntry 7 }
-
-xPDUGroundCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Shows the current measured in the earth ground conductor in tenths of Amps."
- ::= { xPDUGroundMonitorPoint 1 }
-
-xPDUGroundCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..50)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which a ground current over current
- condition will be generated. Measured in tenths of Amps."
- ::= { xPDUGroundMonitorPoint 2 }
-
--- System Breakers
-
-xPDUSystemBreakerTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of system breaker entries."
- ::= { xPDUSystemBreakers 1 }
-
-xPDUSystemBreakerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUSystemBreakerTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of system breaker entries.
- The number of entries is contained in the
- xPDUSystemBreakerTableSize OID."
- ::= { xPDUSystemBreakers 2 }
-
- xPDUSystemBreakerTableEntry OBJECT-TYPE
- SYNTAX XPDUSystemBreakerTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular system breaker."
- INDEX { xPDUSystemBreakerTableIndex }
- ::= { xPDUSystemBreakerTable 1 }
-
- XPDUSystemBreakerTableEntry ::= SEQUENCE {
- xPDUSystemBreakerTableIndex INTEGER,
- xPDUSystemBreakerDescription DisplayString,
- xPDUSystemBreakerPosition INTEGER
- }
-
- xPDUSystemBreakerTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of system breaker entries in the table."
- ::= { xPDUSystemBreakerTableEntry 1 }
-
-xPDUSystemBreakerDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..79))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A brief description of the system breakers."
- ::= { xPDUSystemBreakerTableEntry 2 }
-
- xPDUSystemBreakerPosition OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether this breaker is open(1) or closed(2)."
- ::= { xPDUSystemBreakerTableEntry 3 }
-
--- Branch Breakers (Breaker Panel)
-
-xPDUNumOfBranchBreakers OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of branch breakers in the Panel."
- ::= { xPDUBranchBreakers 1 }
-
--- Branch Breakers Table
-
-xPDUBranchBreakerTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of branch breaker entries."
- ::= { xPDUBranchBreakers 2 }
-
-xPDUBranchBreakerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUBranchBreakerEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of branch breaker table entries. The
- number of entries is given by the value of xPDUBranchBreakerTableSize
- The number of entries is contained in the
- xPDUBranchBreakerTableSize OID."
- ::= { xPDUBranchBreakers 3 }
-
- xPDUBranchBreakerEntry OBJECT-TYPE
- SYNTAX XPDUBranchBreakerEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular branch breaker."
- INDEX { xPDUBranchBreakerTableIndex }
- ::= { xPDUBranchBreakerTable 1 }
-
- XPDUBranchBreakerEntry ::= SEQUENCE {
- xPDUBranchBreakerTableIndex INTEGER,
- xPDUBranchBreakerRating INTEGER,
- xPDUBranchBreakerRDPFeed INTEGER,
- xPDUBranchBreakerTieIndicator INTEGER,
- xPDUBranchBreakerCurrent INTEGER,
- xPDUBranchBreakerOverCurrentThreshold INTEGER,
- xPDUBranchBreakerUnderCurrentThreshold INTEGER
- }
-
- xPDUBranchBreakerTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of branch breaker entries in the table."
- ::= { xPDUBranchBreakerEntry 1 }
-
- xPDUBranchBreakerRating OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Indicates current rating of this breaker.
- 0=Breaker is not present.
- 1=Earth leakage connection.
- 2=Neutral connection.
- A value greater than 2 indicates breaker current rating in Amps."
- ::= { xPDUBranchBreakerEntry 2 }
-
- xPDUBranchBreakerRDPFeed OBJECT-TYPE
- SYNTAX INTEGER {
- remoteDistribution (1),
- noRemoteDistribution (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Indicates that a breaker position is feeding a remote
- distribution panel."
- ::= { xPDUBranchBreakerEntry 3 }
-
- xPDUBranchBreakerTieIndicator OBJECT-TYPE
- SYNTAX INTEGER {
- breakerTied (1),
- breakerUntied (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Indicates whether or not the breaker pole is physically
- connected to the breaker immediately below."
- ::= { xPDUBranchBreakerEntry 4 }
-
- xPDUBranchBreakerCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the branch current in tenths of Amps or -1 when not available."
- ::= { xPDUBranchBreakerEntry 5 }
-
- xPDUBranchBreakerOverCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which a branch circuit over current
- condition will be generated.
- Specified as a percent of the branch breaker rating."
- ::= { xPDUBranchBreakerEntry 6 }
-
- xPDUBranchBreakerUnderCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which a branch circuit under current
- condition will be generated.
- Specified as a percent of the branch breaker rating."
- ::= { xPDUBranchBreakerEntry 7 }
-
--- the xPDUInputContacts group
-
-xPDUInputContactNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts supported by the PDU."
- ::= { xPDUInputContacts 1 }
-
-xPDUInputContactTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input contact entries."
- ::= { xPDUInputContacts 2 }
-
-xPDUInputContactTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUInputContactEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the PDU.
- The number of entries is contained in the
- xPDUInputContactTableSize OID."
- ::= { xPDUInputContacts 3 }
-
-xPDUInputContactEntry OBJECT-TYPE
- SYNTAX XPDUInputContactEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A contact entry containing information for a given contact."
- INDEX { xPDUInputContactNumber }
- ::= { xPDUInputContactTable 1 }
-
-XPDUInputContactEntry ::=
- SEQUENCE {
- xPDUInputContactNumber INTEGER,
- xPDUInputContactName DisplayString,
- xPDUInputContactNormalState INTEGER,
- xPDUInputContactCurrentState INTEGER
- }
-
-xPDUInputContactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index identifying the contact on the PDU."
- ::= { xPDUInputContactEntry 1 }
-
-xPDUInputContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The description of the purpose/use of the contact."
- ::= { xPDUInputContactEntry 2 }
-
-xPDUInputContactNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The normal operating position of the contact."
- ::= { xPDUInputContactEntry 3 }
-
-xPDUInputContactCurrentState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This value indicates the current state of the contact."
- ::= { xPDUInputContactEntry 4 }
-
--- the xPDUOutputRelays group
-
-xPDUOutputRelaysNumRelays OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output relays supported by the PDU."
- ::= { xPDUOutputRelays 1 }
-
-xPDUOutputRelaysTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output relay entries."
- ::= { xPDUOutputRelays 2 }
-
-xPDUOutputRelayTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XPDUOutputRelayEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output relays supported by the PDU.
- The number of entries is contained in the
- xPDUOutputRelayTableSize OID."
- ::= { xPDUOutputRelays 3 }
-
-xPDUOutputRelayEntry OBJECT-TYPE
- SYNTAX XPDUOutputRelayEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A output relay entry containing information for a given contact."
- INDEX { xPDUOutputRelayNumber }
- ::= { xPDUOutputRelayTable 1 }
-
-XPDUOutputRelayEntry ::=
- SEQUENCE {
- xPDUOutputRelayNumber INTEGER,
- xPDUOutputRelayName DisplayString,
- xPDUOutputRelayNormalState INTEGER,
- xPDUOutputRelayCurrentState INTEGER
- }
-
-xPDUOutputRelayNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index identifying the output relay on the PDU."
- ::= { xPDUOutputRelayEntry 1 }
-
-xPDUOutputRelayName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The description of the purpose/use of the output relay."
- ::= { xPDUOutputRelayEntry 2 }
-
-xPDUOutputRelayNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The normal operating position of the output relay."
- ::= { xPDUOutputRelayEntry 3 }
-
-xPDUOutputRelayCurrentState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This value indicates the current state of the output relay."
- ::= { xPDUOutputRelayEntry 4 }
-
--- the xPDUMiscGroup
-
-xPDUEPOMode OBJECT-TYPE
- SYNTAX INTEGER {
- armed (1),
- disarmed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the EPO System is armed(1) or disarmed(2)."
- ::= { xPDUMiscGroup 1 }
-
-xPDUTransformTempStatus OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- overtemp (2),
- noTransformerPresent (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates if the PDU's isolation transformer is over temperature."
- ::= { xPDUMiscGroup 2 }
-
-xPDUCoolingFanStatus OBJECT-TYPE
- SYNTAX INTEGER {
- normal (1),
- failed (2),
- noCoolingFansPresent (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates if one or more of the PDU's cooling fans have failed."
- ::= { xPDUMiscGroup 3 }
-
--- The xATSIdent group
-
-xATSIdentProductName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the transfer switch unit."
- ::= { xATSIdent 1 }
-
-xATSIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the transfer switch.
- This value is set at the factory."
- ::= { xATSIdent 2 }
-
-xATSIdentFirmwareAppRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ID string identifying the application firmware revision of the transfer switch."
- ::= { xATSIdent 3 }
-
-xATSIdentFirmwareAppOSRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ID string identifying the application operating system firmware revision of the transfer switch."
- ::= { xATSIdent 4 }
-
-xATSIdentFirmwareControllerRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ID string identifying the transfer switch controller firmware revision."
- ::= { xATSIdent 5 }
-
-xATSIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the transfer switch was manufactured in mm/dd/yyyy format.
- This value is set at the factory."
- ::= { xATSIdent 6 }
-
-xATSIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the model number of the transfer switch.
- This value is set at the factory."
- ::= { xATSIdent 7 }
-
-xATSIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the serial number of the transfer switch.
- This value is set at the factory."
- ::= { xATSIdent 8 }
-
--- The xATSDevice group
-
-xATSDeviceServiceType OBJECT-TYPE
- SYNTAX INTEGER {
- threeWire (1),
- fourWire (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of utility input to the transfer switch.
- Either 3 wires (delta), or 4 wires (wye)."
- ::= { xATSDevice 1 }
-
-xATSDeviceNominalVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The nominal line-to-neutral system voltage.
- Measured in Volts, line-to-line for a 3-wire service or
- line-to-neutral for a 4-wire service. -1 if not available."
- ::= { xATSDevice 2 }
-
-xATSDeviceNominalFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The nominal system frequency. Measured in tenths of Hertz.
- -1 if not available."
- ::= { xATSDevice 3 }
-
-xATSDeviceTransferSwitchRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The rating of the transfer switch.
- Measured in Amps."
- ::= { xATSDevice 4 }
-
-xATSDeviceDCBackUpPresent OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Indicates if a DC backup is present or not."
- ::= { xATSDevice 5 }
-
--- The xATS Switch Status group
-
-xATSSwitchStatusSelectedSource OBJECT-TYPE
- SYNTAX INTEGER{
- none (1),
- source1 (2),
- source2 (3),
- fault (4),
- unknown (5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The source which is currently selected, i.e. supplying power to the load."
- ::= { xATSSwitchStatus 1 }
-
-xATSSwitchStatusOperationalMode OBJECT-TYPE
- SYNTAX INTEGER{
- automatic (1),
- notInAutoAbnormal (2),
- notInAuto (3),
- unknown (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current operating mode of the transfer switch. When the ATS is in
- automatic mode, generator starting and ATS transferring is all done automatically
- as needed based on the state of source 1. Automatic operation is halted when the
- ATS is in either of the notInAuto modes.
- A mode of notInAuto indicates that the automatic operation switch is in the
- disabled position, as indicated by the xATSSwitchStatusAutomaticOperationSwitch OID.
- The notInAutoAbnormal condition indicates that an abnormal
- condition has caused the transfer switch to halt automatic operation.
- In this case, traps can indicate the exact problem. In the case of
- notInAutoAbnormal, refer to the operation manual for details
- on how debug the condition and restore automatic operation."
- ::= { xATSSwitchStatus 2 }
-
-xATSSwitchStatusAutomaticOperationSwitch OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- enabled (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The position of the automatic operation switch on the front of the transfer switch."
- ::= { xATSSwitchStatus 3 }
-
-xATSSwitchStatusEngineStartSignal OBJECT-TYPE
- SYNTAX INTEGER{
- run (1),
- stop (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The position of the Start/Stop contact which signals the generator
- engine to start/run. When the ATS is in automatic mode,
- generator starting/stopping is under ATS control."
- ::= { xATSSwitchStatus 4 }
-
--- The xATS Switch Setting group
-
-xATSSwitchSettingsLowVoltageTransferPoint OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The lowest acceptable voltage condition at source 1.
- When any phase of source 1 is lower than this voltage,
- source quality is considered bad and the generator run signal
- is asserted to begin generator operation.
- Specified in volts, line-to-line for a 3-wire service or
- line-to-neutral for a 4-wire service.
- -1 if not available."
- ::= { xATSSwitchSettings 1 }
-
-xATSSwitchSettingsHighVoltageTransferPoint OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The highest acceptable voltage condition at source 1.
- When any phase of source 1 is greater than this voltage,
- source quality is considered bad and the generator run signal
- is asserted to begin generator operation.
- Specified in volts, line-to-line for a 3-wire service or
- line-to-neutral for a 4-wire service.
- -1 if not available."
- ::= { xATSSwitchSettings 2 }
-
-xATSSwitchSettingsMaxFrequencyDeviation OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum acceptable frequency deviation condition from nominal at source 1.
- When source 1 frequency is outside the specified range,
- source quality is considered bad and the generator run signal
- is asserted to begin generator operation.
- Specified in tenths of Hertz above or below nominal.
- A value of zero indicates that frequency is ignored when
- determining source quality.
- -1 if not available."
- ::= { xATSSwitchSettings 3 }
-
-xATSSwitchSettingsMinPhaseBalance OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The minimum required phase balance at source 1.
- When the percentage difference between the minimum and maximum
- phase voltage measurements at source 1 is greater than this value,
- source quality is considered bad and the generator run signal
- is asserted to begin generator operation.
- Specified as a percentage. A value of zero indicates that phase balance
- is ignored when determining source quality.
- -1 if not available."
- ::= { xATSSwitchSettings 4 }
-
-xATSSwitchSettingsNominalRotation OBJECT-TYPE
- SYNTAX INTEGER{
- abc (1),
- cba (2),
- any (3),
- unknown (4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The nominal phase rotation (or phase sequence) required by the load.
- For certain types of equipment, such as rotating machinery, phase rotation
- is critical for proper operation as it determines the direction which motors
- will rotate (clockwise or counterclockwise).
- Source quality will be seen as bad if the rotation measured at that
- ATS input does not match this setting.
- If this setting is set to any, phase rotation is ignored."
- ::= { xATSSwitchSettings 5 }
-
-xATSSwitchSettingsAllowClosedTransfer OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2),
- unknown (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This setting enables seemless (closed) transfers between sources.
- When possible, both source 1 and source 2 are closed to the output
- for a brief time. If closed transfer is not possible within the amount
- of time specified by the xATSSwitchSettingsMaxSyncTime OID,
- an open transfer will be executed."
- ::= { xATSSwitchSettings 6 }
-
-xATSSwitchSettingsMaxSyncTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "When attempting/seeking to perform a closed transfer, this setting defines
- the maximum time allowed before the transfer switch will give up and perform
- an open transfer. Specified in seconds.
- -1 if not available."
- ::= { xATSSwitchSettings 7 }
-
-xATSSwitchSettingsNeutralTransferTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This setting defines how long both source 1 and source 2 will be
- disconnected from the output, during an open transfer.
- Specified in seconds.
- -1 if not available."
- ::= { xATSSwitchSettings 8 }
-
-xATSSwitchSettingsClearLatchedAlarms OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Clears any latched alarm conditions."
- ::= { xATSSwitchSettings 9 }
-
-xATSSwitchSettingsSetToFactoryDefaults OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Sets all transfer switch settings to factory default values."
- ::= { xATSSwitchSettings 10 }
-
-
--- The xATSSwitchTimers group
-
- xATSSwitchTimersTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of transfer switch timer entries."
- ::= { xATSSwitchTimers 1 }
-
- xATSSwitchTimersTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSSwitchTimersEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of timers supported by ATS.
- The number of entries is contained in the xATSSwitchTimersTableSize OID."
- ::= { xATSSwitchTimers 2 }
-
- xATSSwitchTimersEntry OBJECT-TYPE
- SYNTAX XATSSwitchTimersEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information about an individual ATS timer."
- INDEX { xATSSwitchTimersIndex }
- ::= { xATSSwitchTimersTable 1 }
-
- XATSSwitchTimersEntry ::=
- SEQUENCE {
- xATSSwitchTimersIndex INTEGER,
- xATSSwitchTimersName DisplayString,
- xATSSwitchTimersAbort INTEGER,
- xATSSwitchTimersStatus INTEGER,
- xATSSwitchTimersRemainingTime INTEGER,
- xATSSwitchTimersDelaySetting INTEGER
- }
-
-xATSSwitchTimersIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of timer entries in the table."
- ::= { xATSSwitchTimersEntry 1 }
-
-xATSSwitchTimersName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Name of the individual timer.Refer to ATS operation manual,
- or on-line help, for detailed descriptions of ATS timers."
- ::= { xATSSwitchTimersEntry 2 }
-
-xATSSwitchTimersAbort OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This aborts the individual timer."
- ::= { xATSSwitchTimersEntry 3 }
-
-xATSSwitchTimersStatus OBJECT-TYPE
- SYNTAX INTEGER{
- inactive (1),
- active (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the individual timer. Designates whether this timer
- entry is currently running or inactive."
- ::= { xATSSwitchTimersEntry 4 }
-
-xATSSwitchTimersRemainingTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time remaining for this timer entry.
- Specified in seconds."
- ::= { xATSSwitchTimersEntry 5 }
-
-xATSSwitchTimersDelaySetting OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The delay settings associated with this timer entry.
- When this timer entry is active, the timer value must exceed this setting
- before the ATS behavior associated with this timer is executed.
- Refer to ATS operation manual, or on-line help, for detailed
- descriptions of ATS timers."
- ::= { xATSSwitchTimersEntry 6 }
-
--- The xATSSwitchBlockMap group
-
- xATSSwitchBlockMapTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of blocking map entries, or how many ATS actions can be blocked."
- ::= { xATSSwitchBlockMap 1 }
-
- xATSSwitchBlockMapTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSSwitchBlockMapEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of blocking maps supported by the ATS.
- The number of entries is contained in the xATSSwitchBlockMapTableSize OID."
- ::= { xATSSwitchBlockMap 2 }
-
- xATSSwitchBlockMapEntry OBJECT-TYPE
- SYNTAX XATSSwitchBlockMapEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information about a specific ATS blocking map."
- INDEX { xATSSwitchBlockMapIndex }
- ::= { xATSSwitchBlockMapTable 1 }
-
- XATSSwitchBlockMapEntry ::=
- SEQUENCE {
- xATSSwitchBlockMapIndex INTEGER,
- xATSSwitchBlockMapName DisplayString,
- xATSSwitchBlockMapStatus INTEGER,
- xATSSwitchBlockMapSetting INTEGER
- }
-
- xATSSwitchBlockMapIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of blocking map entries in the table."
- ::= { xATSSwitchBlockMapEntry 1 }
-
- xATSSwitchBlockMapName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A string describing the ATS action to be blocked."
- ::= { xATSSwitchBlockMapEntry 2 }
-
- xATSSwitchBlockMapStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Represents the status of this blocking map entry, in bit-mapped format.
- A non-zero value indicates that this entry's ATS action is currently being blocked.
- The bit(s) set indicate which input(s) are causing the blocking (bit0, bit1, etc).
-
- bit 0 - Contact 1
- bit 1 - Contact 2
- bit 2 - Contact 3
- bit 3 - Contact 4."
- ::= { xATSSwitchBlockMapEntry 3 }
-
- xATSSwitchBlockMapSetting OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This setting designates the inputs that block the ATS action
- The mapping is specified as a bit-field, where each bit set indicates
- the input that blocks the ATS action associated with the entry.
-
- bit 0 - Contact 1
- bit 1 - Contact 2
- bit 2 - Contact 3
- bit 3 - Contact 4."
- ::= { xATSSwitchBlockMapEntry 4 }
-
--- The xATSSwitchStatistics group
-
- xATSSwitchStatisticsTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of transfer switch statistics entries."
- ::= { xATSSwitchStatistics 1 }
-
- xATSSwitchStatisticsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSSwitchStatisticsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of statistics supported by ATS.
- The number of entries is contained in the xATSSwitchStatisticsTableSize OID."
- ::= { xATSSwitchStatistics 2 }
-
- xATSSwitchStatisticsEntry OBJECT-TYPE
- SYNTAX XATSSwitchStatisticsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information about an individual ATS statistic."
- INDEX { xATSSwitchStatisticsIndex }
- ::= { xATSSwitchStatisticsTable 1 }
-
- XATSSwitchStatisticsEntry ::=
- SEQUENCE {
- xATSSwitchStatisticsIndex INTEGER,
- xATSSwitchStatisticsName DisplayString,
- xATSSwitchStatisticsValue DisplayString,
- xATSSwitchStatisticsReset INTEGER
- }
-
- xATSSwitchStatisticsIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Index of ATS statistics entries in the table."
- ::= { xATSSwitchStatisticsEntry 1 }
-
- xATSSwitchStatisticsName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This is the name of the ATS statistic associated with this entry."
- ::= { xATSSwitchStatisticsEntry 2 }
-
- xATSSwitchStatisticsValue OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This is the value of the ATS statistic associated with this entry."
- ::= { xATSSwitchStatisticsEntry 3 }
-
- xATSSwitchStatisticsReset OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This will reset the individual ATS statistic associated with this entry."
- ::= { xATSSwitchStatisticsEntry 4 }
-
--- The xATS Source 1 group
-
-xATSSource1Name OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "String used to identify source 1."
- ::= { xATSSource1 1 }
-
-xATSSource1Position OBJECT-TYPE
- SYNTAX INTEGER{
- open (1),
- closed (2),
- tripped (3),
- unknown (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current position of the switch at source 1."
- ::= { xATSSource1 2 }
-
-xATSSource1Frequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frequency at source 1 in tenths of Hertz.
- -1 if unavailable."
- ::= { xATSSource1 3 }
-
-xATSSource1Quality OBJECT-TYPE
- SYNTAX INTEGER{
- sourceGood (1),
- lowVoltage (2),
- highVoltage (3),
- phaseImbalance (4),
- freqOutOfRange (5),
- badRotation (6),
- unknown (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current line quality of source 1."
- ::= { xATSSource1 4 }
-
-xATSSource1Rotation OBJECT-TYPE
- SYNTAX INTEGER{
- abc (1),
- cba (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The phase rotation measured at the source 1 input of the ATS.
- The sequence is a reference to the order in which the three phases
- pass the zero-crossing boundary in time."
- ::= { xATSSource1 5 }
-
-xATSSource1TableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input voltage entries at the source 1 input of the ATS."
- ::= { xATSSource1 6 }
-
- xATSSource1Table OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSSource1PhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of voltage table entries for source 1. The number of
- entries are the phase entries. The number of entries is contained in the
- xATSSource1TableSize OID."
- ::= { xATSSource1 7 }
-
- xATSSource1PhaseEntry OBJECT-TYPE
- SYNTAX XATSSource1PhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular input voltage phase at the source 1 input of the ATS."
- INDEX { xATSSource1Index }
- ::= { xATSSource1Table 1 }
-
- XATSSource1PhaseEntry ::= SEQUENCE {
- xATSSource1Index INTEGER,
- xATSSource1VoltageLtoL INTEGER,
- xATSSource1VoltageLtoN INTEGER
- }
-
- xATSSource1Index OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each phase utilized at source 1."
- ::= { xATSSource1PhaseEntry 1 }
-
- xATSSource1VoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Source 1 line-to-line input voltage.
- Measured in tenths of Volts."
- ::= { xATSSource1PhaseEntry 2 }
-
- xATSSource1VoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Source 1 line-to-neutral input voltage.
- Measured in tenths of Volts. -1 for a 3-wire service type."
- ::= { xATSSource1PhaseEntry 3 }
-
--- The xATS Source 2 group
-
-xATSSource2Name OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "String used to identify source 2."
- ::= { xATSSource2 1 }
-
-xATSSource2Position OBJECT-TYPE
- SYNTAX INTEGER{
- open (1),
- closed (2),
- tripped (3),
- unknown (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current position of the switch at source 2."
- ::= { xATSSource2 2 }
-
-xATSSource2Frequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frequency at source 2 in tenths of Hertz.
- -1 if not available."
- ::= { xATSSource2 3 }
-
-xATSSource2Quality OBJECT-TYPE
- SYNTAX INTEGER{
- sourceGood (1),
- lowVoltage (2),
- highVoltage (3),
- phaseImbalance (4),
- freqOutOfRange (5),
- badRotation (6),
- unknown (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current line quality of source 2."
- ::= { xATSSource2 4 }
-
-xATSSource2Rotation OBJECT-TYPE
- SYNTAX INTEGER{
- abc (1),
- cba (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The phase rotation measured at the source 2 input of the ATS.
- -1 if not available."
- ::= { xATSSource2 5 }
-
-xATSSource2TableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input voltage entries at the source 2 input of the ATS."
- ::= { xATSSource2 6 }
-
- xATSSource2Table OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSSource2PhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of voltage table entries for the source 2. The number of
- entries are the phase entries. The number of entries is contained in the
- xATSSource2TableSize OID."
- ::= { xATSSource2 7 }
-
- xATSSource2PhaseEntry OBJECT-TYPE
- SYNTAX XATSSource2PhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular input voltage phase at the source 2 input of the ATS."
- INDEX { xATSSource2Index }
- ::= { xATSSource2Table 1 }
-
- XATSSource2PhaseEntry ::= SEQUENCE {
- xATSSource2Index INTEGER,
- xATSSource2VoltageLtoL INTEGER,
- xATSSource2VoltageLtoN INTEGER
- }
-
- xATSSource2Index OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each phase utilized at the source 2."
- ::= { xATSSource2PhaseEntry 1 }
-
- xATSSource2VoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Source 2 line-to-line input voltage.
- Measured in tenths of Volts."
- ::= { xATSSource2PhaseEntry 2 }
-
- xATSSource2VoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Source 2 line-to-neutral input voltage.
- Measured in tenths of Volts. -1 for a 3-wire service type."
- ::= { xATSSource2PhaseEntry 3 }
-
--- The xATSSystemOutput
-
-xATSSystemOutputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system output frequency in tenths of Hertz."
- ::= { xATSSystemOutput 1 }
-
-xATSSystemOutputTotalPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Shows the total system output power in tenths of kW."
- ::= { xATSSystemOutput 2 }
-
-xATSSystemOutputTotalApparentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Shows the total system output power in tenths of kVA."
- ::= { xATSSystemOutput 3 }
-
-xATSSystemOutputTotalPowerFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the total power factor of the system output.
- A value of 100 representing a unity power factor (1.00)
- Specified in hundredths."
- ::= { xATSSystemOutput 4 }
-
-xATSSystemOutputFrequencyTolerance OBJECT-TYPE
- SYNTAX INTEGER{
- freqToleranceOff (1),
- freqTolerancePointTwo (2),
- freqTolerancePointFive (3),
- freqToleranceOne (4),
- freqToleranceOnePointFive (5),
- freqToleranceTwo (6),
- freqToleranceThree (7),
- freqToleranceFour (8),
- freqToleranceFive (9),
- freqToleranceNine (10)
-
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Shows the panel output frequency tolerance in +/- Hertz."
- ::= { xATSSystemOutput 5 }
-
-xATSSystemOutputOverVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which an output over voltage condition will be generated.
- Specified as tenths of percent deviation from nominal.
- A value of zero indicates that the threshold is disabled."
- ::= { xATSSystemOutput 6 }
-
-xATSSystemOutputUnderVoltThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which an output under voltage condition will be generated.
- Specified as tenths of percent deviation from nominal.
- A value of zero indicates that the threshold is disabled."
- ::= { xATSSystemOutput 7 }
-
-xATSSystemOutputOverCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold above which an over current condition will be generated.
- Specified as a percent of the transfer switch rating (xATSDeviceTransferSwitchRating OID).
- A value of zero indicates that the threshold is disabled."
- ::= { xATSSystemOutput 8 }
-
-xATSSystemOutputUnderCurrentThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which an under current condition will be generated.
- Specified as a percent of the transfer switch rating (xATSDeviceTransferSwitchRating OID).
- A value of zero indicates that the threshold is disabled."
- ::= { xATSSystemOutput 9 }
-
-xATSSystemOutputAlarmDelayThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Delay the generation of an output alarm.
- Specified in seconds."
- ::= { xATSSystemOutput 10 }
-
-xATSSystemOutputTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of system output phase entries."
- ::= { xATSSystemOutput 11 }
-
-xATSSystemOutputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSSystemOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of system output table entries.
- The number of entries is contained in the xATSSystemOutputTableSize OID."
- ::= { xATSSystemOutput 12 }
-
- xATSSystemOutputPhaseEntry OBJECT-TYPE
- SYNTAX XATSSystemOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular system output phase."
- INDEX { xATSSystemOutputPhaseIndex }
- ::= { xATSSystemOutputTable 1 }
-
- XATSSystemOutputPhaseEntry ::= SEQUENCE {
- xATSSystemOutputPhaseIndex INTEGER,
- xATSSystemOutputVoltageLtoL INTEGER,
- xATSSystemOutputVoltageLtoN INTEGER,
- xATSSystemOutputPhaseCurrent INTEGER,
- xATSSystemOutputPower INTEGER,
- xATSSystemOutputApparentPower INTEGER,
- xATSSystemOutputPowerFactor INTEGER
- }
-
- xATSSystemOutputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each system output phase utilized in this device."
- ::= { xATSSystemOutputPhaseEntry 1 }
-
- xATSSystemOutputVoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-line system output voltage, measured in tenths of Volts, available at the circuit panel.
- -1 if not available."
- ::= { xATSSystemOutputPhaseEntry 2 }
-
- xATSSystemOutputVoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-neutral system output voltage, measured in tenths of Volts, available at the circuit panel.
- -1 for a 3-wire service type or if not available."
- ::= { xATSSystemOutputPhaseEntry 3 }
-
- xATSSystemOutputPhaseCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System load current per phase. Measured in Amps.
- -1 if not available."
- ::= { xATSSystemOutputPhaseEntry 4 }
-
- xATSSystemOutputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System output power per phase. Measured in tenths of kW."
- ::= { xATSSystemOutputPhaseEntry 5 }
-
- xATSSystemOutputApparentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "system output power per phase. Measured in tenths of kVA."
- ::= { xATSSystemOutputPhaseEntry 6 }
-
- xATSSystemOutputPowerFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "indicates the power factor of the system output per phase.
- A value of 100 representing a unity power factor (1.00).
- Measured in hundredths."
- ::= { xATSSystemOutputPhaseEntry 7 }
-
--- xATS TestingStatus group
-
-xATSTestingStatusSelectTestProcess OBJECT-TYPE
- SYNTAX INTEGER {
- engineStartTest (1),
- systemLoadTest (2),
- generatorHoldTest (3),
- cancelTest (4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Type of tests that can be selected when no test has been scheduled.
- engineStartTest and systemLoadTest may be selected when no tests
- are running. Tests that are selected may be cancelled manually."
- ::= { xATSTestingStatus 1 }
-
-xATSTestingStatusTestStatus OBJECT-TYPE
- SYNTAX INTEGER {
- noTestInProcess (1),
- testPending (2),
- startingEngine (3),
- engineWarmingUp (4),
- awaitingTransferToS2 (5),
- testingWithLoad (6),
- awaitingRetransferToS1 (7),
- testingWithoutLoad (8),
- stoppingEngine (9),
- holdingOnGenerator (10)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The present system test status/state."
- ::= { xATSTestingStatus 2 }
-
-xATSTestingStatusProfileWarmupTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time that the generator will warm up during a test.
- This is portion of the test when the xATSTestingStatusTestStatus
- OID returns the value engineWarmingUp.
- Specified in seconds."
- ::= { xATSTestingStatus 3 }
-
-xATSTestingStatusProfileLoadedTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time that ATS will apply the system load to the generator
- during a system load test.
- This is portion of the test when the xATSTestingStatusTestStatus
- OID returns the value testingWithLoad.
- Specified in minutes."
- ::= { xATSTestingStatus 4 }
-
-xATSTestingStatusProfileUnloadedTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time that the generator will run following the warm up
- portion of a start test, or the loaded portion of a load test.
- This is portion of the test when the xATSTestingStatusTestStatus
- OID returns the value testingWithoutLoad.
- Specified in seconds."
- ::= { xATSTestingStatus 5 }
-
--- xATS TestingResults group
-
-xATSTestingResultsLastDateOfTest OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Date of the last test that was performed, either scheduled or manual.
- Test results are available in the xATSTestingResultsLastResult OID.
- Specified in the dd/mm/yyyy format, or 'none' if not available."
- ::= { xATSTestingResults 1 }
-
-xATSTestingResultsLastResult OBJECT-TYPE
- SYNTAX INTEGER {
- startTestPassed (1),
- loadTestPassed (2),
- startSignalFailure (3),
- failedGenNotInAuto (4),
- failedGenEmerStop (5),
- failedGenShutdown (6),
- failedGenDidNotStart (7),
- failedS2NeverGood (8),
- genFailedDuringWarmup (9),
- failureOnXferToS1 (10),
- genFailedLoaded (11),
- failureOnRexferToS2 (12),
- genFailedToStop (13),
- failedAtsInternalFault (14),
- failedAtsNotInAuto (15),
- cancelledManualTest (16),
- cancelledScheduledTest (17)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The result of the last ATS/generator system test."
- ::= { xATSTestingResults 2 }
-
-xATSTestingResultsTestLastTestTime OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Time of day at which the last test was performed, either scheduled or manual.
- Test results are available in the xATSTestingResultsLastResult OID.
- Specified in the hh:mm:ss format, or 'none' if not available."
- ::= { xATSTestingResults 3 }
-
-xATSTestingResultsLastCrankDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time spent cranking the generator before it started during the last test.
- Specified in seconds, or -1 if not available."
- ::= { xATSTestingResults 4 }
-
-xATSTestingResultsLastWarmupDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time spent in the engineWarmingUp state during the last system test.
- Specified in seconds, or -1 if not available."
- ::= { xATSTestingResults 5 }
-
-xATSTestingResultsLastLoadedDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time spent in the testingWithLoad state during the last system test.
- Specified in seconds, or -1 if not available."
- ::= { xATSTestingResults 6 }
-
-xATSTestingResultsLastUnloadedDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time spent in the testingWithoutLoad state during the last system test.
- Specified in seconds, or -1 if not available."
- ::= { xATSTestingResults 7 }
-
--- xATS TestingSchedule group
-
-xATSTestingScheduleFrequency OBJECT-TYPE
- SYNTAX INTEGER {
- never (1),
- daily (2),
- weekly (3),
- monthly (4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The frequency of running scheduled tests."
- ::= { xATSTestingSchedule 1 }
-
-xATSTestingScheduleTestDay OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The desired day for the scheduled test. This object applies only
- when the xATSTestingScheduleFrequency OID is set to weekly or monthly.
- For weekly test frequency, the string is the day the test will be run.
- For monthly test frequency, the string indicates the day,
- and the instance within the month.
- For example, for monthly frequency: 2nd sunday, 3rd monday, 4th tuesday,
- for weekly frequency: sunday, monday, tuesday."
- ::= { xATSTestingSchedule 2 }
-
-xATSTestingScheduleTestTime OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The time of day that the scheduled test will occur.
- Specified in the format hh:mm."
- ::= { xATSTestingSchedule 3 }
-
-xATSTestingScheduleTestWithLoadInterval OBJECT-TYPE
- SYNTAX INTEGER {
- applyLoadEveryTest (1),
- neverApplyLoad (2),
- applyLoadMonthly (3),
- applyLoadMonthlyDetailed (4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This setting specifies which system tests should include applying the
- load to the generator. The applyLoadMonthlyDetailed entry
- in the list will apply load once, for each month represented in the
- xATSTestingScheduleTestWithLoadSelectMonth OID."
- ::= { xATSTestingSchedule 4 }
-
-xATSTestingScheduleTestWithLoadSelectMonth OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The detailed selection for testing with load on a month-by-month basis.
- This object is applicable when the xATSTestingScheduleTestWithLoadInterval
- is set to applyLoadMonthlyDetailed. Otherwise this selection will be ignored.
- Format for this string is a comma-separated entry of months.
- For example: Jan,Mar,Dec.
- The string will return 'No Months Scheduled' if no months have been selected."
- ::= { xATSTestingSchedule 5 }
-
-xATSTestingScheduleNextTestDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date of the next scheduled test, in the format dd-mmm-yyyy."
- ::= { xATSTestingSchedule 6 }
-
--- xATSTestingSimulatePowerFail group
-
-xATSTestingSimulatePowerFailTest OBJECT-TYPE
- SYNTAX INTEGER{
- cancelSimulation (1),
- fiveSecondsSimulation (2),
- tenSecondsSimulation (3),
- thirtySecondsSimulation (4),
- oneMinuteSimulation (5),
- threeMinutesSimulation (6),
- fiveMinutesSimulation (7),
- tenMinutesSimulation (8)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object executes a simulated power failure for the duration indicated.
- Simulation can be aborted by selecting cancelSimulation."
- ::= { xATSTestingSimulatePowerFail 1 }
-
-xATSTestingSimulatePowerFailTimeRemaining OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the time remaining in seconds, for a simulated power failure.
- a value of zero indicates that simulated power failure is not active."
- ::= { xATSTestingSimulatePowerFail 2 }
-
--- The xATS Input Contact group
-
-xATSInputContactNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts supported by the ATS."
- ::= { xATSInputContacts 1 }
-
-xATSInputContactTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input contact entries."
- ::= { xATSInputContacts 2 }
-
-xATSInputContactTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSContactEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the ATS.
- The number of entries is contained in the
- xATSInputContactTableSize OID."
- ::= { xATSInputContacts 3 }
-
- xATSInputContactEntry OBJECT-TYPE
- SYNTAX XATSContactEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A contact entry containing information for a given contact."
- INDEX { xATSInputContactNumber }
- ::= { xATSInputContactTable 1 }
-
- XATSContactEntry ::=
- SEQUENCE {
- xATSInputContactNumber INTEGER,
- xATSInputContactName DisplayString,
- xATSInputContactNormalState INTEGER,
- xATSInputContactCurrentState INTEGER
- }
-
- xATSInputContactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index identifying the contact on the ATS."
- ::= { xATSInputContactEntry 1 }
-
- xATSInputContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The description of the purpose/use of the contact."
- ::= { xATSInputContactEntry 2 }
-
- xATSInputContactNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The normal operating position of the contact."
- ::= { xATSInputContactEntry 3 }
-
- xATSInputContactCurrentState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This value indicates the current state of the contact."
- ::= { xATSInputContactEntry 4 }
-
--- the xATS OutputRelays group
-
- xATSOutputRelayNumRelays OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output relays supported by the ATS."
- ::= { xATSOutputRelays 1 }
-
- xATSOutputRelayTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output relay entries."
- ::= { xATSOutputRelays 2 }
-
- xATSOutputRelayTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSOutputRelayEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output relays supported by the ATS.
- The number of entries is contained in the
- xATSOutputRelayTableSize OID."
- ::= { xATSOutputRelays 3 }
-
- xATSOutputRelayEntry OBJECT-TYPE
- SYNTAX XATSOutputRelayEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A output relay entry containing information for a given contact."
- INDEX { xATSOutputRelayNumber }
- ::= { xATSOutputRelayTable 1 }
-
- XATSOutputRelayEntry ::=
- SEQUENCE {
- xATSOutputRelayNumber INTEGER,
- xATSOutputRelayName DisplayString,
- xATSOutputRelayNormalState INTEGER,
- xATSOutputRelayCurrentState INTEGER
- }
-
- xATSOutputRelayNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index identifying the output relay on the ATS."
- ::= { xATSOutputRelayEntry 1 }
-
- xATSOutputRelayName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The description of the purpose/use of the output relay."
- ::= { xATSOutputRelayEntry 2 }
-
- xATSOutputRelayNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The normal operating position of the output relay."
- ::= { xATSOutputRelayEntry 3 }
-
- xATSOutputRelayCurrentState OBJECT-TYPE
- SYNTAX INTEGER {
- open (1),
- closed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This value indicates the current state of the output relay."
- ::= { xATSOutputRelayEntry 4 }
-
--- The xATS Generator Ident group
-
-xATSGeneratorIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the model number of the generator.
- This value is set at the factory."
- ::= { xATSGeneratorIdent 1 }
-
-xATSGeneratorIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the serial number of the generator.
- This value is set at the factory."
- ::= { xATSGeneratorIdent 2 }
-
-xATSGeneratorIdentDateofManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying when the generator was manufactured in mm/dd/yyyy format.
- This value is set at the factory."
- ::= { xATSGeneratorIdent 3 }
-
-xATSGeneratorIdentVoltageConfiguration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The voltage for which the generator's alternator is designed.
- Specified in Volts line-to-line."
- ::= { xATSGeneratorIdent 4 }
-
-xATSGeneratorIdentMaxPowerRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The max power rating of the generator. Specified in kW."
- ::= { xATSGeneratorIdent 5 }
-
-xATSGeneratorIdentAlternatorFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frequency for which the generator's alternator is designed.
- Specified in Hertz."
- ::= { xATSGeneratorIdent 6 }
-
--- The xATS Generator Status group
-
-xATSGeneratorStatusGeneratorName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name or label for the generator connected to the source 2 of the ATS."
- ::= { xATSGeneratorStatus 1 }
-
-xATSGeneratorStatusOperational OBJECT-TYPE
- SYNTAX INTEGER{
- nocomm (1),
- off (2),
- ready (3),
- starting (4),
- idle (5),
- running (6),
- normalStop (7),
- emergencyStop (8),
- notInAuto (9),
- shutdown (10),
- unknown (11)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The operational status of the generator. unavailable when unrecognized status is received."
- ::= { xATSGeneratorStatus 2 }
-
-xATSGeneratorStatusModeSwitchPosition OBJECT-TYPE
- SYNTAX INTEGER{
- off (1),
- manual (2),
- automatic (3),
- unknown (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The position of the generator's auto-mode switch.
- In automatic mode, the generator is started and stopped via the
- remote start contact, which has state indicated in the
- xATSGeneratorStatusRemoteStart OID.
- In manual mode generator start/stop control is via local command only.
- Off prevents the generator from running."
- ::= { xATSGeneratorStatus 3 }
-
-xATSGeneratorStatusRemoteStart OBJECT-TYPE
- SYNTAX INTEGER{
- stop (1),
- run (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the generator's remote start contact, which is
- provided as an output from the transfer switch to start/stop the
- generator when in automatic mode."
- ::= { xATSGeneratorStatus 4 }
-
--- The xATS Generator Advanced Status group
-
-xATSGeneratorAdvStatusBatteryVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The voltage of the generator's starting battery.
- Measured in tenths of VDC, or -1 if not available."
- ::= { xATSGeneratorAdvStatus 1 }
-
-xATSGeneratorAdvStatusOilPressure OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The generator's engine oil pressure.
- Measured in tenths of Psi or kPa, based on the
- value of the xATSGeneratorSettingsMetricUnit OID,
- or -1 if not available."
- ::= { xATSGeneratorAdvStatus 2 }
-
-xATSGeneratorAdvStatusCoolantTemperature OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current coolant temperature in the generator.
- Measured in degrees Celsius or Fahrenheit, based on the
- value of the xATSGeneratorSettingsMetricUnit OID,
- or -1 if not available."
- ::= { xATSGeneratorAdvStatus 3 }
-
-xATSGeneratorAdvStatusEngineRPM OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Current engine speed of the generator.
- Measured in RPM, or -1 if not available."
- ::= { xATSGeneratorAdvStatus 4 }
-
-xATSGeneratorAdvStatusOilLevel OBJECT-TYPE
- SYNTAX INTEGER{
- ok (1),
- low (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates adequate oil level in the generator."
- ::= { xATSGeneratorAdvStatus 5 }
-
-xATSGeneratorAdvStatusCoolantLevel OBJECT-TYPE
- SYNTAX INTEGER{
- ok (1),
- low (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates adequate coolant level in the generator."
- ::= { xATSGeneratorAdvStatus 6 }
-
--- The xATS Generator Output group
-
-xATSGeneratorOutputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output frequency of the generator.
- Measured in tenths of Hertz, or -1 if not avaialble."
- ::= { xATSGeneratorOutput 1 }
-
-xATSGeneratorOutputTotalPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total output power of the generator.
- Measured in tenths of tenths of kW, or -1 if not avaialble."
- ::= { xATSGeneratorOutput 2 }
-
-xATSGeneratorOutputTotalApparentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total output power of the generator.
- Measured in tenths of kVA, or -1 if not avaialble."
- ::= { xATSGeneratorOutput 3 }
-
-xATSGeneratorOutputTotalPowerFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the total load power factor of the generator.
- A value of 100 representing a unity power factor (1.00),
- or -1 when if not avaialble."
- ::= { xATSGeneratorOutput 4 }
-
-xATSGeneratorOutputTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of generator output phase entries."
- ::= { xATSGeneratorOutput 5 }
-
- xATSGeneratorOutputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF XATSGeneratorOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of generator output table entries.
- The number of entries is contained in the xATSGeneratorOutputTableSize OID."
- ::= { xATSGeneratorOutput 6 }
-
- xATSGeneratorOutputPhaseEntry OBJECT-TYPE
- SYNTAX XATSGeneratorOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular generator output phase."
- INDEX { xATSGeneratorOutputPhaseIndex }
- ::= { xATSGeneratorOutputTable 1 }
-
- XATSGeneratorOutputPhaseEntry ::= SEQUENCE {
- xATSGeneratorOutputPhaseIndex INTEGER,
- xATSGeneratorOutputVoltageLtoL INTEGER,
- xATSGeneratorOutputVoltageLtoN INTEGER,
- xATSGeneratorOutputPhaseCurrent INTEGER,
- xATSGeneratorOutputPower INTEGER,
- xATSGeneratorOutputApparentPower INTEGER,
- xATSGeneratorOutputPowerFactor INTEGER
- }
-
- xATSGeneratorOutputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each generator output phase utilized in this device."
- ::= { xATSGeneratorOutputPhaseEntry 1 }
-
- xATSGeneratorOutputVoltageLtoL OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-line generator output voltage.
- Measured in Volts, or -1 if not available."
- ::= { xATSGeneratorOutputPhaseEntry 2 }
-
- xATSGeneratorOutputVoltageLtoN OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Line-to-neutral generator output voltage.
- Measured in volts, or -1 if not avaialble."
- ::= { xATSGeneratorOutputPhaseEntry 3 }
-
- xATSGeneratorOutputPhaseCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Generator load current per phase.
- Measured in Amps, or -1 if not avaialble."
- ::= { xATSGeneratorOutputPhaseEntry 4 }
-
- xATSGeneratorOutputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Generator output power per phase.
- Measured in tenths of kW, or -1 if not avaialble."
- ::= { xATSGeneratorOutputPhaseEntry 5 }
-
- xATSGeneratorOutputApparentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Generator output power per phase.
- Measured in tenths of kVA, or -1 if not available."
- ::= { xATSGeneratorOutputPhaseEntry 6 }
-
- xATSGeneratorOutputPowerFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates the load power factor of the generator output per phase.
- A value of 100 representing a unity power factor (1.00),
- or -1 if not avaialble."
- ::= { xATSGeneratorOutputPhaseEntry 7 }
-
--- xATS Generator Settings group
-
-xATSGeneratorSettingsVoltageAdjust OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The voltage adjust of the generator.
- Specified in volts line-to-line,
- or -1 if not available."
- ::= { xATSGeneratorSettings 1 }
-
-xATSGeneratorSettingsFrequencyAdjust OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frequency adjust of the generator.
- Specified in tenths of Hertz."
- ::= { xATSGeneratorSettings 2 }
-
-xATSGeneratorSettingsStartDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The delay, in seconds, after the remote run signal is activated
- before the generator's engine will be cranked to start,
- or -1 if not available."
- ::= { xATSGeneratorSettings 3 }
-
-xATSGeneratorSettingsStopDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The delay, in seconds, before the generator will stop
- after the remote run signal is deactivated,
- or -1 if not available."
- ::= { xATSGeneratorSettings 4 }
-
-xATSGeneratorSettingsCrankCycleEnable OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- enabled (2),
- unknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "When Crank Cycle is enabled, the engine will be cranked up to the time
- specified by the xATSGeneratorSettingsCrankTime OID.
- If the generator's engine does not start, there will be a pause as
- specified by the xATSGeneratorSettingsCrankRestTime OID before the
- engine will be cranked again. This cycle is repeated as specified by
- the xATSGeneratorSettingsNumberCrank OID.
- When crank cycle is disabled, the generator's engine will be
- cranked continuously until it starts."
- ::= { xATSGeneratorSettings 5 }
-
-xATSGeneratorSettingsCrankTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The duration of engine cranking, in seconds, when starting the generator.
- Applicable when the xATSGeneratorSettingsCrankCycleEnable OID is enabled.
- -1 if not available."
- ::= { xATSGeneratorSettings 6 }
-
-xATSGeneratorSettingsCrankRestTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The pause duration, in seconds, following an unsuccessful attempt to start the generator.
- Applicable when the xATSGeneratorSettingsCrankCycleEnable OID is enabled.
- -1 if not available."
- ::= { xATSGeneratorSettings 7 }
-
-xATSGeneratorSettingsNumberCrank OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of failed crank attempts before giving up on starting the generator.
- Applicable when the xATSGeneratorSettingsCrankCycleEnable OID is enabled.
- -1 if not available."
- ::= { xATSGeneratorSettings 8 }
-
-xATSGeneratorSettingsMetricUnit OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- enabled (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Specifies the use of metric units in generator related OIDs, as well
- as on all other interfaces including the generator's local interface."
- ::= { xATSGeneratorSettings 9 }
-
--- xATS generator service group
-
-xATSGeneratorServiceTotalRunHoursLifetime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total time that the generator engine has been run,
- over the life of the generator. Measured in hours.
- -1 if not available."
- ::= { xATSGeneratorService 1 }
-
-xATSGeneratorServiceEngineStartsLifetime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of engine starts over the life of the generator.
- -1 if not available."
- ::= { xATSGeneratorService 2 }
-
-xATSGeneratorServiceTotalkWhLifetime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total kWh of operation over the life of the generator.
- -1 if not available."
- ::= { xATSGeneratorService 3 }
-
-xATSGeneratorServiceTotalRunHoursSinceMaintanence OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total time that the generator engine has been run,
- since last service maintenance. Measured in tenths of hours.
- -1 if not available."
- ::= { xATSGeneratorService 4 }
-
-xATSGeneratorServiceEngineStartsSinceMaintanence OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Number of engine starts since last service maintenance.
- -1 if not available."
- ::= { xATSGeneratorService 5 }
-
-xATSGeneratorServiceTotalkWhMaintanence OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Total kWh of operation since last service maintenance.
- -1 if not available."
- ::= { xATSGeneratorService 6 }
-
-xATSGeneratorServiceResetRecord OBJECT-TYPE
- SYNTAX INTEGER{
- yes (1),
- no (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Resets the engine start counter, engine run-hours, and kWh values that have
- accumulated in the generator since last maintenance.
- Also, the last service date will be reset to the current system date, and
- any service alarms will be cleared."
- ::= { xATSGeneratorService 7 }
-
-xATSGeneratorServiceRecordResetDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Date at which the generator's service record was reset, in dd-mmm-yyyy format."
- ::= { xATSGeneratorService 8 }
-
-xATSGeneratorServiceNextServiceDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Date at which the next generator service is due in dd-mmm-yyyy format.
- Based on the xATSGeneratorServiceCalendarIntervalThreshold OID
- or '' if the calander-based threshold is set to off."
- ::= { xATSGeneratorService 9 }
-
-xATSGeneratorServiceRunHoursUntilServiceDate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Runhours until the next generator service is due, in hours.
- Based on the xATSGeneratorServiceRunHoursThreshold OID
- or -1 if the runhour-based threshold is set to off."
- ::= { xATSGeneratorService 10 }
-
-xATSGeneratorServiceRunHoursThreshold OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- runThreshold100Hours (2),
- runThreshold150Hours (3),
- runThreshold200Hours (4),
- runThreshold250Hours (5),
- runThreshold300Hours (6),
- runThreshold400Hours (7),
- runThreshold500Hours (8)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Runhour-based service interval. When the run-hours since
- service surpasses this threshold, generator service is due."
- ::= { xATSGeneratorService 11 }
-
-xATSGeneratorServiceCalendarIntervalThreshold OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- interval1month (2),
- interval2month (3),
- interval3month (4),
- interval6month (5),
- intervalyearly (6)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Calander-based service interval. When the next service date,
- as indicated by the xATSGeneratorServiceNextServiceDate OID
- is in the past, generator is due for service."
- ::= { xATSGeneratorService 12 }
-
--- The xATS Generator Fuel system group
-
-xATSGeneratorFuelSystemType OBJECT-TYPE
- SYNTAX INTEGER{
- diesel (1),
- propane (2),
- naturalGas (3),
- unknown (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of fuel used by the generator."
- ::= { xATSGeneratorFuelSystem 1 }
-
-xATSGeneratorFuelSystemTankSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Size of the generator's fuel tank.
- Specified in gallons or liters, based on the value of the
- xATSGeneratorSettingsMetricUnit OID, or -1 if not available."
- ::= { xATSGeneratorFuelSystem 2 }
-
-xATSGeneratorFuelSystemFuelLevel OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Fuel remaining in the generator tank.
- Measured in percent of tank fill, or -1 if if not available."
- ::= { xATSGeneratorFuelSystem 3 }
-
-xATSGeneratorFuelSystemRuntimePower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The power value used in the runtime remaining calculation.
- Measured in tenths of kW, or -1 if not available."
- ::= { xATSGeneratorFuelSystem 4 }
-
-xATSGeneratorFuelSystemEstimatedRunTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An estimate of available runtime for the generator, based on
- available fuel as specified in the xATSGeneratorFuelSystemFuelLevel OID
- and kW load as specified in the xATSGeneratorFuelSystemRuntimePower OID.
- Measured in tenths of hours, or -1 if not available."
- ::= { xATSGeneratorFuelSystem 5 }
-
-xATSGeneratorFuelSystemLowRunTimeThreshold OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- oneHour (2),
- twoHours (3),
- threeHours (4),
- fourHours (5),
- fiveHours (6),
- sixHours (7),
- twelveHours (8),
- oneDay (9),
- twoDays (10),
- threeDays (11),
- fourDays (12),
- fiveDays (13),
- sixDays (14),
- sevenDays (15)
-
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which a low runtime alarm will exist."
- ::= { xATSGeneratorFuelSystem 6 }
-
-xATSGeneratorFuelSystemVeryLowRunTimeThreshold OBJECT-TYPE
- SYNTAX INTEGER{
- disabled (1),
- oneHour (2),
- twoHours (3),
- threeHours (4),
- fourHours (5),
- fiveHours (6),
- sixHours (7),
- twelveHours (8),
- oneDay (9),
- twoDays (10),
- threeDays (11),
- fourDays (12),
- fiveDays (13),
- sixDays (14),
- sevenDays (15)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which a very low runtime alarm will exist."
- ::= { xATSGeneratorFuelSystem 7 }
-
-xATSGeneratorFuelSystemLowFuelLevelThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which a low fuel alarm will exist, with a value of 0 indicating disabled.
- Specified as percent of tank fill."
- ::= { xATSGeneratorFuelSystem 8 }
-
-xATSGeneratorFuelSystemVeryLowFuelLevelThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold below which a very low fuel alarm will exist, with a value of 0 indicating disabled.
- Specified as percent of tank fill."
- ::= { xATSGeneratorFuelSystem 9 }
-
--- the software group
--- the powerNetSubAgent group
--- the powerNetSoftwareSystem group
-
-powerNetSoftwareSystemDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..79))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A brief description of the PowerNet sub-agent."
- ::= { powerNetSoftwareSystem 1 }
-
-powerNetSoftwareOid OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The object identifier of the PowerNet sub-agent."
- ::= { powerNetSoftwareSystem 2 }
-
--- powerNetSmuxPeer OBJECT IDENTIFIER ::= { powerNetSoftwareOid 1 }
--- powerNetDPIPeer OBJECT IDENTIFIER ::= { powerNetSoftwareOid 2 }
-
-powerNetSoftwareSystemUpTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The time that the sub-agent has been running."
- ::= { powerNetSoftwareSystem 3 }
-
-
--- powerNetSoftwareConfig group
-
-powerNetSoftwareTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of software modules supporting the UPS."
- ::= { powerNetSoftwareConfig 1 }
-
-powerNetSoftwareTable OBJECT-TYPE
- SYNTAX SEQUENCE OF SoftwareEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of the software monitoring the UPS."
- ::= { powerNetSoftwareConfig 2 }
-
-powerNetSoftwareEntry OBJECT-TYPE
- SYNTAX SoftwareEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information on a software module."
- INDEX { moduleNumber }
- ::= { powerNetSoftwareTable 1 }
-
-SoftwareEntry ::=
- SEQUENCE {
- moduleNumber
- INTEGER,
- moduleName
- DisplayString,
- moduleVersion
- DisplayString,
- moduleDate
- DisplayString
- }
-
-moduleNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index into the Software Entry Table"
- ::= { powerNetSoftwareEntry 1 }
-
-moduleName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..79))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the software module."
- ::= { powerNetSoftwareEntry 2 }
-
-moduleVersion OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..8))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The version of the software module."
- ::= { powerNetSoftwareEntry 3 }
-
-moduleDate OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..9))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date of the software module represented as mm-dd-yy."
- ::= { powerNetSoftwareEntry 4 }
-
-
--- the ups group
--- the upsIdent group
--- the upsBasicIdent
-
-upsBasicIdentModel OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The UPS model name (e.g. 'APC Smart-UPS 600')."
- ::= { upsBasicIdent 1 }
-
-upsBasicIdentName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An 8 byte ID string identifying the UPS. This object
- can be set by the administrator."
- ::= { upsBasicIdent 2 }
-
-
--- the upsAdvIdent group
-
-upsAdvIdentFirmwareRevision OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the UPS system's microprocessor."
- ::= { upsAdvIdent 1 }
-
-upsAdvIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the UPS was manufactured in mm/dd/yy format."
- ::= { upsAdvIdent 2 }
-
-upsAdvIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An 8-character string identifying the serial number of
- the UPS internal microprocessor. This number is set at
- the factory. NOTE: This number does NOT correspond to
- the serial number on the rear of the UPS."
- ::= { upsAdvIdent 3 }
-
-
-
--- the upsBattery group
--- the upsBasicBattery group
-
-upsBasicBatteryStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- batteryNormal(2),
- batteryLow(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the UPS batteries. A batteryLow(3)
- value indicates the UPS will be unable to sustain the
- current load, and its services will be lost if power is
- not restored. The amount of run time in reserve at the
- time of low battery can be configured by the
- upsAdvConfigLowBatteryRunTime."
- ::= { upsBasicBattery 1 }
-
-upsBasicBatteryTimeOnBattery OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The elapsed time since the UPS has switched to battery
- power."
- ::= { upsBasicBattery 2 }
-
-upsBasicBatteryLastReplaceDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The date when the UPS system's batteries were last replaced
- in mm/dd/yy format. For Smart-UPS models, this value
- is originally set in the factory. When the UPS batteries
- are replaced, this value should be reset by the administrator."
- ::= { upsBasicBattery 3 }
-
-
-
--- the upsAdvBattery group
-
-upsAdvBatteryCapacity OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The remaining battery capacity expressed in
- percent of full capacity."
- ::= { upsAdvBattery 1 }
-
-upsAdvBatteryTemperature OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current internal UPS temperature expressed in
- Celsius."
- ::= { upsAdvBattery 2 }
-
-upsAdvBatteryRunTimeRemaining OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The UPS battery run time remaining before battery
- exhaustion."
- ::= { upsAdvBattery 3 }
-
-upsAdvBatteryReplaceIndicator OBJECT-TYPE
- SYNTAX INTEGER {
- noBatteryNeedsReplacing(1),
- batteryNeedsReplacing(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Indicates whether the UPS batteries need replacing."
- ::= { upsAdvBattery 4 }
-
-upsAdvBatteryNumOfBattPacks OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of external battery packs connected to the UPS. If
- the UPS does not use smart cells then the agent reports
- ERROR_NO_SUCH_NAME."
- ::= { upsAdvBattery 5 }
-
-upsAdvBatteryNumOfBadBattPacks OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of external battery packs connected to the UPS that
- are defective. If the UPS does not use smart cells then the
- agent reports ERROR_NO_SUCH_NAME."
- ::= { upsAdvBattery 6 }
-
-upsAdvBatteryNominalVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The nominal battery voltage in Volts."
- ::= { upsAdvBattery 7 }
-
-upsAdvBatteryActualVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The actual battery bus voltage in Volts."
- ::= { upsAdvBattery 8 }
-
-upsAdvBatteryCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery current in Amps."
- ::= { upsAdvBattery 9 }
-
-upsAdvTotalDCCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total DC current in Amps."
- ::= { upsAdvBattery 10 }
-
-
--- the upsBasicInput group
-
-upsBasicInputPhase OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current AC input phase."
- ::= { upsBasicInput 1 }
-
-
--- the upsAdvInput group
-
-upsAdvInputLineVoltage OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current utility line voltage in VAC."
- ::= { upsAdvInput 1 }
-
-upsAdvInputMaxLineVoltage OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum utility line voltage in VAC over the
- previous 1 minute period."
- ::= { upsAdvInput 2 }
-
-upsAdvInputMinLineVoltage OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum utility line voltage in VAC over the
- previous 1 minute period."
- ::= { upsAdvInput 3 }
-
-upsAdvInputFrequency OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current input frequency to the UPS system in Hz."
- ::= { upsAdvInput 4 }
-
-
-upsAdvInputLineFailCause OBJECT-TYPE
- SYNTAX INTEGER {
- noTransfer(1),
- highLineVoltage(2),
- brownout(3),
- blackout(4),
- smallMomentarySag(5),
- deepMomentarySag(6),
- smallMomentarySpike(7),
- largeMomentarySpike(8),
- selfTest(9),
- rateOfVoltageChnage(10)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The reason for the occurrence of the last transfer to UPS
- battery power. The variable is set to:
- - noTransfer(1) -- if there is no transfer yet.
- - highLineVoltage(2) -- if the transfer to battery is caused
- by an over voltage greater than the high transfer voltage.
- - brownout(3) -- if the duration of the outage is greater than
- five seconds and the line voltage is between 40% of the
- rated output voltage and the low transfer voltage.
- - blackout(4) -- if the duration of the outage is greater than five
- seconds and the line voltage is between 40% of the rated
- output voltage and ground.
- - smallMomentarySag(5) -- if the duration of the outage is less
- than five seconds and the line voltage is between 40% of the
- rated output voltage and the low transfer voltage.
- - deepMomentarySag(6) -- if the duration of the outage is less
- than five seconds and the line voltage is between 40% of the
- rated output voltage and ground. The variable is set to
- - smallMomentarySpike(7) -- if the line failure is caused by a
- rate of change of input voltage less than ten volts per cycle.
- - largeMomentarySpike(8) -- if the line failure is caused by
- a rate of change of input voltage greater than ten volts per cycle.
- - selfTest(9) -- if the UPS was commanded to do a self test.
- - rateOfVoltageChange(10) -- if the failure is due to the rate of change of
- the line voltage."
- ::= { upsAdvInput 5 }
-
-
--- the upsBasicOutput group
-
-upsBasicOutputStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- onLine(2),
- onBattery(3),
- onSmartBoost(4),
- timedSleeping(5),
- softwareBypass(6),
- off(7),
- rebooting(8),
- switchedBypass(9),
- hardwareFailureBypass(10),
- sleepingUntilPowerReturn(11),
- onSmartTrim(12)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current state of the UPS. If the UPS is unable
- to determine the state of the UPS this variable is set
- to unknown(1)."
- ::= { upsBasicOutput 1 }
-
-upsBasicOutputPhase OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current output phase."
- ::= { upsBasicOutput 2 }
-
-
--- the upsAdvOutput group
-
-upsAdvOutputVoltage OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output voltage of the UPS system in VAC."
- ::= { upsAdvOutput 1 }
-
-upsAdvOutputFrequency OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current output frequency of the UPS system in Hz."
- ::= { upsAdvOutput 2 }
-
-upsAdvOutputLoad OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current UPS load expressed in percent
- of rated capacity."
- ::= { upsAdvOutput 3 }
-
-upsAdvOutputCurrent OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current in amperes drawn by the load on the UPS."
- ::= { upsAdvOutput 4 }
-
-
--- the upsBasicConfig group
-
-upsBasicConfigNumDevices OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of devices that are plugged into the UPS."
- ::= { upsBasicConfig 1 }
-
-upsBasicConfigDeviceTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsBasicConfigDeviceEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of devices that are plugged into the UPS.
- The number of entries is given by the value of
- upsBasicConfigNumDevices."
- ::= { upsBasicConfig 2 }
-
-upsBasicConfigDeviceEntry OBJECT-TYPE
- SYNTAX UpsBasicConfigDeviceEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The devices plugged in to the UPS."
- INDEX { deviceIndex }
- ::= { upsBasicConfigDeviceTable 1 }
-
-UpsBasicConfigDeviceEntry ::=
- SEQUENCE {
- deviceIndex
- INTEGER,
- deviceName
- DisplayString,
- vaRating
- INTEGER,
- acceptThisDevice
- INTEGER
- }
-
-deviceIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the device that is plugged into the UPS."
- ::= { upsBasicConfigDeviceEntry 1 }
-
-deviceName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name/description of the device plugged into the UPS."
- ::= { upsBasicConfigDeviceEntry 2 }
-
-vaRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The volt-amp rating of the device plugged into the UPS."
- ::= { upsBasicConfigDeviceEntry 3 }
-
-acceptThisDevice OBJECT-TYPE
- SYNTAX INTEGER {
- yes(1),
- no(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An entry is added if yes, the entry is deleted if no."
- ::= { upsBasicConfigDeviceEntry 4 }
-
-
-
-
--- the upsAdvConfig group
-
-upsAdvConfigRatedOutputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The nominal output voltage from the UPS in VAC.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { upsAdvConfig 1 }
-
-upsAdvConfigHighTransferVolt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum line voltage in VAC allowed before the
- UPS system transfers to battery backup.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as a the next higher
- acceptable value. If the provided value is higher than
- the highest acceptable value, the highest acceptable
- value is used."
- ::= { upsAdvConfig 2 }
-
-upsAdvConfigLowTransferVolt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The minimum line voltage in VAC allowed before the
- UPS system transfers to battery backup.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { upsAdvConfig 3 }
-
-upsAdvConfigAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- timed(1),
- atLowBattery(2),
- never(3),
- mute(4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A flag indicating how the UPS should handle audible
- line fail alarms:
- timed(1): UPS alarm will sound after a preset timed duration starting
- from the line fail condition (see OID upsAdvConfigAlarmTimer for the
- alarm timer value)
- atLowBattery(2): UPS alarm will sound when the UPS has reached a Low
- Battery condition during a line fail
- never(3): Disables the UPS audible alarm
- mute(4): Mutes the current alarm for some UPSs only when it is in an
- alarm state and will return to the previously configured option when
- the UPS recovers from the alarm condition"
- ::= { upsAdvConfig 4 }
-
-upsAdvConfigAlarmTimer OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The time after initial line failure at which the UPS
- begins emitting audible alarms (beeping). This timer is
- observed only if the value of extControlAlarm is timed(2).
- Allowed values are 0 or 30 seconds.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as a the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { upsAdvConfig 5 }
-
-upsAdvConfigMinReturnCapacity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The minimum battery capacity required before the UPS will
- return from a low battery shutdown condition. The capacity is
- measured from 0% battery capacity (or Low Battery) as a percent
- of full capacity (100%). In other words, the UPS will not re-energize
- the output until the battery has charged so that its' capacity is equal
- to this value.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as a the next higher
- acceptable value. If the provided value is higher than
- the highest acceptable value, the highest acceptable
- value is used."
- ::= { upsAdvConfig 6 }
-
-upsAdvConfigSensitivity OBJECT-TYPE
- SYNTAX INTEGER {
- auto(1),
- low(2),
- medium(3),
- high(4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The sensitivity of the UPS to utility line abnormalities
- or noises."
- ::= { upsAdvConfig 7 }
-
-upsAdvConfigLowBatteryRunTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The desired run time of the UPS, in seconds, once the
- low battery condition is reached. During this time the UPS will
- produce a constant warning tone which can not be disabled.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a set
- request, the UPS interprets the value as the next higher
- acceptable value. If the provided value is higher than the
- highest acceptable value, the highest acceptable value is used."
- ::= { upsAdvConfig 8 }
-
-upsAdvConfigReturnDelay OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The delay in seconds after utility line power returns
- before the UPS will turn on. This value is also used
- when the UPS comes out of a reboot and before the UPS
- wakes up from 'sleep' mode.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as a the next higher
- acceptable value. If the provided value is higher than
- the highest acceptable value, the highest acceptable
- value is used."
- ::= { upsAdvConfig 9 }
-
-upsAdvConfigShutoffDelay OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The delay in seconds the UPS remains on after being told
- to turn off.
-
- For a list of allowed values supported by your UPS model,
- see the UPS User's Manual.
-
- If a value other than a supported value is provided in a
- set request, the UPS interprets it as a the next higher
- acceptable value. If the provided value is higher than
- the highest acceptable value, the highest acceptable
- value is used."
- ::= { upsAdvConfig 10 }
-
-upsAdvConfigUpsSleepTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The time in seconds for the UPS to go to 'sleep' when
- instructed. When in sleep mode, the UPS will not provide
- output power regardless of the input line state. Once the
- specified time has elapsed, output power will be restored.
-
- This is a configuration setting. The UPS will not go to
- sleep until told to do so by the manager from a management
- station.
-
- Any input value is allowed, however the UPS only recognizes
- 1/10 of an hour increments. The provided value will be
- rounded to the closest 1/10 of an hour with one exception:
- Any value entered between 1 and 540 seconds will be rounded
- to 360 seconds (or 6 minutes)."
- ::= { upsAdvConfig 11 }
-
-
-upsAdvConfigSetEEPROMDefaults OBJECT-TYPE
- SYNTAX INTEGER {
- noSetEEPROMDefaults(1),
- setEEPROMDefaults(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "WRITE: Resets the UPS EEPROM variables to default values.
- READ: returns 0"
- ::= { upsAdvConfig 12 }
-
-upsAdvConfigDipSwitchSetting OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsAdvConfigDipSwitchEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Current settings of UPS dip switches."
- ::= { upsAdvConfig 13 }
-
-upsAdvConfigDipSwitchEntry OBJECT-TYPE
- SYNTAX UpsAdvConfigDipSwitchEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The current setting of one dip switch."
- INDEX { dipSwitchIndex }
- ::= { upsAdvConfigDipSwitchSetting 1 }
-
-UpsAdvConfigDipSwitchEntry ::=
- SEQUENCE {
- dipSwitchIndex
- INTEGER,
- dipSwitchStatus
- INTEGER
- }
-
-dipSwitchIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of a UPS dip switch."
- ::= { upsAdvConfigDipSwitchEntry 1 }
-
-dipSwitchStatus OBJECT-TYPE
- SYNTAX INTEGER {
- on(1),
- off(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The setting of a UPS dip switch."
- ::= { upsAdvConfigDipSwitchEntry 2 }
-
-upsAdvConfigBattExhaustThresh OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The number of seconds prior to battery exhaustion when the
- UPS will switch off power to its load."
- ::= { upsAdvConfig 14 }
-
-upsAdvConfigPassword OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The password entered at the UPS front panel to enable local
- configuration of the EEProm. If the password is disabled or
- is not supported, then the agent returns a null string."
- ::= { upsAdvConfig 15 }
-
-upsAdvConfigAllowedSetTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ApcUpsConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The table listing the allowed values for all discrete
- configurable UPS variables."
- ::= { upsAdvConfig 16 }
-
-apcUpsConfigEntry OBJECT-TYPE
- SYNTAX ApcUpsConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The table entry for a configurable UPS variable."
- INDEX { apcUpsConfigFieldIndex }
- ::= { upsAdvConfigAllowedSetTable 1 }
-
-ApcUpsConfigEntry ::= SEQUENCE {
- apcUpsConfigFieldIndex INTEGER,
- apcUpsConfigFieldOID OBJECT IDENTIFIER,
- apcUpsConfigFieldValueRange DisplayString
- }
-
-apcUpsConfigFieldIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to an eeprom field entry."
- ::= { apcUpsConfigEntry 1 }
-
-apcUpsConfigFieldOID OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The OID of the current configurable value."
- ::= { apcUpsConfigEntry 2 }
-
-apcUpsConfigFieldValueRange OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The discrete set of allowed values of a configurable
- register. Individual values are delimited by a comma."
- ::= { apcUpsConfigEntry 3 }
-
-upsAdvConfigBattCabAmpHour OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure settings of UPS battery cabinet amp hour setting."
- ::= { upsAdvConfig 17 }
-
-upsAdvConfigPositionSelector OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- rack (2),
- tower (3)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure UPS position selector. If the UPS doesn't
- support this configuration it will report unknown (1).
- The positions are either rack (2) for rack mounted or
- tower (3) for tower unit."
- ::= { upsAdvConfig 18 }
-
-upsAdvConfigOutputFreqRange OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- freqRangeAUTO (2),
- freqRange60Var1 (3),
- freqRange60Var3 (4),
- freqRange50Var1 (5),
- freqRange50Var3 (6),
- freqRange60Var10 (7),
- freqRange50Var10 (8)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure the output frequency tolerance range.
- unknown(1) indicates the output frequency is unknown.
- freqRangeAUTO(2) configure the output frequency range for automatic.
- freqRange60Var1(3) configure the output frequency range for 60 +/- 0.1 Hz
- freqRange60Var3(4) configure the output frequency range for 60 +/- 3.0 Hz
- freqRange50Var1(5) configure the output frequency range for 50 +/- 0.1 Hz
- freqRange50Var3(6) configure the output frequency range for 50 +/- 3.0 Hz
- freqRange60Var10(7) configure the output frequency range for 60 +/- 10 Hz
- freqRange50Var10(8) configure the output frequency range for 50 +/- 10 Hz"
- ::= { upsAdvConfig 19 }
-
-upsAdvConfigUPSFail OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- gotoBypass (2),
- dropLoad (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure the UPS fail action. If UPS fails,
- and frequency or voltage is out of range it will either
- GotoBypass (2) or DropLoad (3). This OID will report
- unknown (1) if it is not supported feature or option."
- ::= { upsAdvConfig 20 }
-
-upsAdvConfigAlarmRedundancy OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure settings of UPS alarm if the redundancy is
- under the current redundancy. Use -1 for never."
- ::= { upsAdvConfig 21 }
-
-upsAdvConfigAlarmLoadOver OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure settings of UPS alarm if the load is
- over the current load in kVA. Use -1 for never."
- ::= { upsAdvConfig 22 }
-
-upsAdvConfigAlarmRuntimeUnder OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure settings of UPS alarm if the runtime is
- under the current time of minutes. Use -1 for never."
- ::= { upsAdvConfig 23 }
-
-upsAdvConfigVoutReporting OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- voutAUTO (2),
- vout208 (3),
- vout240 (4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure the way the UPS scales its output voltage readings.
- unknown(1) indicates the Vout Reporting is unknown.
- voutAUTO(2) configure the Vout Reporting for automatic scalling.
- vout208(3) configure the Vout Reporting for 208 Volts.
- vout240(4) configure the Vout Reporting for 240 Volts."
- ::= { upsAdvConfig 24 }
-
-upsAdvConfigNumExternalBatteries OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure the number of external batteries connected to the UPS."
- ::= { upsAdvConfig 25 }
-
-upsAdvConfigSimpleSignalShutdowns OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- disabled (2),
- enabled (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Configure Simple Signal shutdown commands from the Simple Signal
- port to be issued to the UPS.
- unknown(1) indicates the Simple Signal Shutdown setting is unknown.
- disabled(2) configure to disable Simple Signal Shutdowns.
- enabled(3) configure to enable Simple Signal Shutdowns."
- ::= { upsAdvConfig 26 }
-
-
--- the upsSyncCtrlGroupConfig group
-
-upsSCGMembershipGroupNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The SCG Membership Group number (MGN) is a 16-bit number allowing
- up to 65534 separate groups that can be identified and distinguished
- per IP subnet. Zero and 65535 are not used. The MGN is used in all
- communication between members of the SCG and a Network Management Card
- (NMC) will listen and only respond to commands sent to it using its
- configured SCG ID."
- ::= { upsSyncCtrlGroupConfig 1 }
-
-upsSCGActiveMembershipStatus OBJECT-TYPE
- SYNTAX INTEGER {
- enabledSCG (1),
- disabledSCG (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Membership in the configured SCG can be enabled and
- disabled. If an NMC is configured for an SCG, but
- has its membership disabled, all synchronized control commands
- received will be ignored."
- ::= { upsSyncCtrlGroupConfig 2 }
-
-upsSCGPowerSynchronizationDelayTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The Power Synchronization Delay Time (PSD) setting is the maximum
- number of seconds an SCG Initiator will wait for all SCG members to
- recover utility power before completing the reboot sequence of a
- reboot or sleep command. If all SCG members are ready to proceed,
- no additional delay is introduced."
- ::= { upsSyncCtrlGroupConfig 3 }
-
-upsSCGReturnBatteryCapacityOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A reboot command uses the Initiator�s Return battery Capacity (RBC) to control
- when the SCG completes this operation. In a Normal Control Operation (NCC) the
- UPS will only complete the reboot if RBC is reached. Due to normal battery
- charge rate variations it may be desirable for the Followers to complete the
- reboot if they are within some range of the Initiator�s RBC when the Initiator
- is prepared (charged to RBC) to complete the reboot. The Return Battery
- Capacity Offset (RBCO) defines a percent battery capacity subtracted from an
- RBC above which a Follower�s battery must be charged for it to complete a
- reboot. For example, if the Initiator�s RBC is 50% and the Initiator�s RBCO is
- 5% then a Follower�s battery capacity is within range if it is greater or equal
- to 45% (50% - 5%) at the time when the Initiator tries to complete the reboot
- command. The default RBCO is 10%. "
- ::= { upsSyncCtrlGroupConfig 4 }
-
-upsSCGMultiCastIP OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The MultiCast IP address of the SCG Group."
- ::= { upsSyncCtrlGroupConfig 5 }
-
--- the upsSyncCtrlGroupStatus group
-
-upsSCGNumOfGroupMembers OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of active, communicating members in the Sync Control Group (SCG).
- This variable indicates the number of rows in the SCG Status Table."
- ::= { upsSyncCtrlGroupStatus 1 }
-
--- Sync Control Group Status Table
-
-upsSCGStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsSCGStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of SCG status table entries. The number of entries
- is given by the value of upsSCGNumOfGroupMembers."
- ::= { upsSyncCtrlGroupStatus 2 }
-
- upsSCGStatusEntry OBJECT-TYPE
- SYNTAX UpsSCGStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular SCG Member."
- INDEX { upsSCGStatusTableIndex }
- ::= { upsSCGStatusTable 1 }
-
- UpsSCGStatusEntry ::= SEQUENCE {
- upsSCGStatusTableIndex INTEGER,
- upsSCGMemberIP IpAddress,
- upsSCGACInputStatus INTEGER,
- upsSCGACOutputStatus INTEGER
- }
-
- upsSCGStatusTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of a status entry for an active, communicating SCG member."
- ::= { upsSCGStatusEntry 1 }
-
- upsSCGMemberIP OBJECT-TYPE
- SYNTAX IpAddress
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The IP address of an active, communicating SCG Member."
- ::= { upsSCGStatusEntry 2 }
-
- upsSCGACInputStatus OBJECT-TYPE
- SYNTAX INTEGER {
- acInGood(1),
- acInBad(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID indicates the AC Input Status of the SCG Member.
- acInGood(1) indicates the AC Input is within tolerance.
- acInBad(2) indicates the AC Input is not within tolerance."
- ::= { upsSCGStatusEntry 3 }
-
- upsSCGACOutputStatus OBJECT-TYPE
- SYNTAX INTEGER {
- acOutOn(1),
- acOutOff(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID indicates the AC Output Status of the SCG Member.
- acOutOn(1) indicates the UPS output is providing power to the load.
- acOutOff(2) indicates the UPS output is not providing power to the load. "
- ::= { upsSCGStatusEntry 4 }
-
--- the upsBasicState group
-
-upsBasicStateOutputState OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ASCII string containing the 64 flags representing
- the current state(s) of the UPS. If the Network Card
- is unable to determine the state of the UPS, this
- variable is set to �UNKNOWN�.
-
- The flags are numbered 1 to 64, read from left to
- right. The flags are defined as follows:
-
- Flag 1: Abnormal Condition Present
- Flag 2: On Battery
- Flag 3: Low Battery
- Flag 4: On Line
-
- Flag 5: Replace Battery
- Flag 6: Serial Communication Established
- Flag 7: AVR Boost Active*
- Flag 8: AVR Trim Active*
-
- Flag 9: Overload
- Flag 10: Runtime Calibration
- Flag 11: Batteries Discharged
- Flag 12: Manual Bypass
-
- Flag 13: Software Bypass
- Flag 14: In Bypass due to Internal Fault
- Flag 15: In Bypass due to Supply Failure*
- Flag 16: In Bypass due to Fan Failure*
-
- Flag 17: Sleeping on a Timer
- Flag 18: Sleeping until Utility Power Returns
- Flag 19: On
- Flag 20: Rebooting
-
- Flag 21: Battery Communication Lost*
- Flag 22: Graceful Shutdown Initiated
- Flag 23: Smart Boost or Smart Trim Fault*
- Flag 24: Bad Output Voltage*
-
- Flag 25: Battery Charger Failure*
- Flag 26: High Battery Temperature
- Flag 27: Self Test In Progress
- Flag 28: Low Battery / On Battery
-
- Flag 29: Graceful Shutdown Issued by Upstream Device
- Flag 30: Graceful Shutdown Issued by Downstream Device
- Flag 31: No Batteries Attached*
- Flag 32: Synchronized command is in progress
-
- Flag 33: <Not Used>
- Flag 34: <Not Used>
- Flag 35: <Not Used>
- Flag 36: <Not Used>
-
- Flag 37: <Not Used>
- Flag 38: <Not Used>
- Flag 39: <Not Used>
- Flag 40: <Not Used>
-
- Flag 41: <Not Used>
- Flag 42: <Not Used>
- Flag 43: <Not Used>
- Flag 44: <Not Used>
-
- Flag 45: <Not Used>
- Flag 46: <Not Used>
- Flag 47: <Not Used>
- Flag 48: <Not Used>
-
- Flag 49: <Not Used>
- Flag 50: <Not Used>
- Flag 51: <Not Used>
- Flag 52: <Not Used>
-
- Flag 53: <Not Used>
- Flag 54: <Not Used>
- Flag 55: <Not Used>
- Flag 56: <Not Used>
-
- Flag 57: <Not Used>
- Flag 58: <Not Used>
- Flag 59: <Not Used>
- Flag 60: <Not Used>
-
- Flag 61: <Not Used>
- Flag 62: <Not Used>
- Flag 63: <Not Used>
- Flag 64: <Not Used>"
-
- ::= { upsBasicState 1 }
-
--- the upsAdvState group
-
-upsAdvStateAbnormalConditions OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ASCII string containing the 32 flags representing
- the current active UPS faults. If the Network Card
- is unable to determine the values of the flags, this
- variable is set to �UNKNOWN�. If this variable is not
- supported by the connected UPS, this variable is set to
- �NOT SUPPORTED�.
-
- The flags are numbered from 1 to 32, and read from left to
- right. The flags are defined as follows:
-
- Flag 1: Power Module Failure
- Flag 2: Main Intelligence Module Failure
- Flag 3: Redundant Intelligence Module Failure
- Flag 4: Battery Failure
-
- Flag 5: Load(kVA) Alarm Threshold Violation
- Flag 6: Redundancy Lost
- Flag 7: Redundancy Below Alarm Threshold
- Flag 8: Bypass notin Range; Either Frequency or Voltage
-
- Flag 9: Bypass Contactor Stuck in Bypass Condition
- Flag 10: Bypass Contactor Stuck in On-Line Condition
- Flag 11: In Bypass due to an Internal Fault
- Flag 12: In Bypass due to an Overload
-
- Flag 13: In Maintanence Bypass
- Flag 14: Input Circuit Braker Tripped Open
- Flag 15: System Level Fan Failure
- Flag 16: Redundant Intelligent Module in Control
-
- Flag 17: IIC Inter-Module Communication Failure
- Flag 18: No Working Power Modules
- Flag 19: Load Shutdown From Bypass; Input Frequency
- Flag 20: Runtime Below Alarm Threshold
-
- Flag 21: Extended Run Frame Fault
- Flag 22: Output Voltage out of Range
- Flag 23: UPS Not Synchronized
- Flag 24: No Batteries Installed
-
- Flag 25: Battery Voltage High
- Flag 26: UPS Specific Fault Detected
- Flag 27: Site Wiring Fault
- Flag 28: Backfeed Protection Relay Opened
-
- Flag 29: <Not Used>
- Flag 30: <Not Used>
- Flag 31: <Not Used>
- Flag 32: <Not Used>"
- ::= { upsAdvState 1 }
-
-upsAdvStateSymmetra3PhaseSpecificFaults OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ASCII string containing the 64 flags representing
- the current active UPS specific faults for the Symmetra
- 3-Phase UPS models. If the Network Card is unable to
- determine the values of the flags, this variable is set
- to �UNKNOWN�. If the connected UPS does not use this
- variable, it is set to �NOT SUPPORTED�.
-
- The flags are numbered from 1 to 64, and read from left
- to right. The bits are defined as follows:
-
- Flag 1: External Switch Gear Failure
- Flag 2: External Transformer Over Temperature
- Flag 3: External DC Circuit Breaker Tripped
- Flag 4: System Power Supply Failure
-
- Flag 5: Battery Monitor Card Failure
- Flag 6: Battery Monitor Card Removed
- Flag 7: XR Communication Card Failure
- Flag 8: XR Communication Card Removed
-
- Flag 9: External Switch Gear Monitoring Card Failure
- Flag 10: External Switch Gear Monitoring Card Removed
- Flag 11: Internal DC Circiut Breaker Tripped
- Flag 12: Static Bypass Switch Failure
-
- Flag 13: System EEPROM Removed
- Flag 14: System EEPROM Failure
- Flag 15: UPS in Forced Bypass
- Flag 16: <Not Used>
-
- Flag 17: <Not Used>
- Flag 18: <Not Used>
- Flag 19: <Not Used>
- Flag 20: <Not Used>
-
- Flag 21: <Not Used>
- Flag 22: <Not Used>
- Flag 23: <Not Used>
- Flag 24: <Not Used>
-
- Flag 25: <Not Used>
- Flag 26: <Not Used>
- Flag 27: <Not Used>
- Flag 28: <Not Used>
-
- Flag 29: <Not Used>
- Flag 30: <Not Used>
- Flag 31: <Not Used>
- Flag 32: <Not Used>
-
- Flag 33: <Not Used>
- Flag 34: <Not Used>
- Flag 35: <Not Used>
- Flag 36: <Not Used>
-
- Flag 37: <Not Used>
- Flag 38: <Not Used>
- Flag 39: <Not Used>
- Flag 40: <Not Used>
-
- Flag 41: <Not Used>
- Flag 42: <Not Used>
- Flag 43: <Not Used>
- Flag 44: <Not Used>
-
- Flag 45: <Not Used>
- Flag 46: <Not Used>
- Flag 47: <Not Used>
- Flag 48: <Not Used>
-
- Flag 49: <Not Used>
- Flag 50: <Not Used>
- Flag 51: <Not Used>
- Flag 52: <Not Used>
-
- Flag 53: <Not Used>
- Flag 54: <Not Used>
- Flag 55: <Not Used>
- Flag 56: <Not Used>
-
- Flag 57: <Not Used>
- Flag 58: <Not Used>
- Flag 59: <Not Used>
- Flag 60: <Not Used>
-
- Flag 61: <Not Used>
- Flag 62: <Not Used>
- Flag 63: <Not Used>
- Flag 64: <Not Used>"
- ::= { upsAdvState 2 }
-
-upsAdvStateDP300ESpecificFaults OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ASCII string containing the 64 flags representing
- the current active UPS specific faults for the Silcon
- DP300E UPS models. If the Network Card is unable to
- determine the values of the flags, this variable is set
- to �UNKNOWN�. If the connected UPS does not use this
- variable, it is set to �NOT SUPPORTED�.
-
- The flags are numbered from 1 to 64, and read from left
- to right. The bits are defined as follows:
-
- Flag 1: Peak Current Limiter Avtive
- Flag 2: Bypass Power Supply Fault
- Flag 3: Delta Current LImiter Active
- Flag 4: Fan Fault
-
- Flag 5: High DC warning
- Flag 6: Inverter Voltage Error
- Flag 7: Parallel Synchronization Error
- Flag 8: Second Power Supply Fault
-
- Flag 9: Internal Power Supply Fault
- Flag 10: <Not Used>
- Flag 11: <Not Used>
- Flag 12: <Not Used>
-
- Flag 13: <Not Used>
- Flag 14: Bypass Static Switch High Temperature
- Flag 15: High Battery Temperature
- Flag 16: Battery Weak
-
- Flag 17: <Not Used>
- Flag 18: System Locked in Operation Mode
- Flag 19: RAM1 Memory Write Error
- Flag 20: Memory Write Error
-
- Flag 21: Communication to VQ Bypass Lost
- Flag 22: Communication to VQ Output Lost
- Flag 23: Communication to DMU Lost
- Flag 24: Communication to Controller Lost
-
- Flag 25: Communication to Parallel IF Lost
- Flag 26: External Shutdown Accepted
- Flag 27: DC Capacitor Charge Error
- Flag 28: Communication to VQ Mains Lost
-
- Flag 29: Bypass Synchronization Error
- Flag 30: Charge Error
- Flag 31: <Not Used>
- Flag 32: <Not Used>
-
- Flag 33: <Not Used>
- Flag 34: <Not Used>
- Flag 35: <Not Used>
- Flag 36: <Not Used>
-
- Flag 37: <Not Used>
- Flag 38: <Not Used>
- Flag 39: <Not Used>
- Flag 40: <Not Used>
-
- Flag 41: <Not Used>
- Flag 42: <Not Used>
- Flag 43: <Not Used>
- Flag 44: <Not Used>
-
- Flag 45: <Not Used>
- Flag 46: <Not Used>
- Flag 47: <Not Used>
- Flag 48: <Not Used>
-
- Flag 49: <Not Used>
- Flag 50: <Not Used>
- Flag 51: <Not Used>
- Flag 52: <Not Used>
-
- Flag 53: <Not Used>
- Flag 54: <Not Used>
- Flag 55: <Not Used>
- Flag 56: <Not Used>
-
- Flag 57: <Not Used>
- Flag 58: <Not Used>
- Flag 59: <Not Used>
- Flag 60: <Not Used>
-
- Flag 61: <Not Used>
- Flag 62: <Not Used>
- Flag 63: <Not Used>
- Flag 64: <Not Used>"
- ::= { upsAdvState 3 }
-
-
--- the upsBasicControl group
-
-upsBasicControlConserveBattery OBJECT-TYPE
- SYNTAX INTEGER {
- noTurnOffUps(1),
- turnOffUpsToConserveBattery(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to turnUpsOffToConserveBattery(2)
- causes a UPS on battery to be put into 'sleep' mode. The
- UPS will turn back on when utility power is restored.
- Attempting to turn off a UPS that is not on battery will
- result in a badValue error.
-
- Setting this value to noTurnOffUps(1) has no
- effect.
-
- The value noTurnOffUps(1) will always be returned
- when the variable is read."
-::= { upsBasicControl 1 }
-
-
-
--- the upsAdvControl group
-
-upsAdvControlUpsOff OBJECT-TYPE
- SYNTAX INTEGER {
- noTurnUpsOff(1),
- turnUpsOff(2),
- turnUpsOffGracefully(3),
- turnUpsSyncGroupOff(4),
- turnUpsSyncGroupOffAfterDelay(5),
- turnUpsSyncGroupOffGracefully(6)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to turnUpsOff(2) causes
- the UPS to shut off. When in this state, the UPS
- will not provide output power regardless of the input
- line state.
-
- Setting this variable to turnUpsOffGracefully(3) causes
- the UPS to shut off after a delay period. This allows the
- host to shut down in a graceful manner. When in this state,
- the UPS will not provide output power regardless of the
- input line state.
-
- If this UPS is an active member of a Synchronized
- Control Group (SCG) the turnUpsSyncGroupOff(4) command
- will perform a Synchronized Turn Off of all active Group
- members regardless of their current AC output status.
-
- If this UPS is an active member of a Synchronized
- Control Group (SCG) the turnUpsSyncGroupOffAfterDelay(5)
- command will perform a Synchronized Turn Off After Delay
- of all active Group members regardless of their current
- AC output status. This unit's Shutdown Delay will be used
- to execute the Turn Off After Delay command.
-
- If this UPS is an active member of an SCG, the
- turnUpsSyncGroupOffGracefully(6) command will perform a
- Synchronized Turn Off Gracefully of all active Group
- members regardless of their current AC output status.
- This unit's Maximum Shutdown Time and Shutdown Delay will
- be used to execute the Turn Off Gracefully command.
-
- Setting this value to noTurnUpsOff(1) has no
- effect.
-
- The value noTurnUpsOff(1) will always be returned
- when the variable is read."
- ::= { upsAdvControl 1 }
-
-upsAdvControlRebootUps OBJECT-TYPE
- SYNTAX INTEGER {
- noRebootUps(1),
- rebootUps(2),
- rebootUpsGracefully(3),
- rebootSyncGroupUps(4),
- rebootSyncGroupUpsGracefully(5)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to rebootUps(2) causes the
- UPS to shut off and turn back on.
-
- Setting this variable to rebootUpsGracefully(3) causes the
- UPS to shut off and turn back on after a delay period.
- This allows the host to shut down in a graceful manner.
-
- If this UPS is an active member of a Synchronized Control
- Group (SCG) the rebootSyncGroupUps(4) command will perform
- a Synchronized Reboot of all active Group members regardless
- of their current AC output status. This unit's Power
- Synchronization Delay, Shutdown Delay, Return Delay,
- Return Battery Capacity, and Return Battery Capacity Offset
- will be used to execute the Reboot command.
-
- If this UPS is an active member of a SCG the
- rebootSyncGroupUpsGracefully(5) command will perform a
- Synchronized Reboot of all active Group members regardless
- of their current AC output status. This unit's Power
- Synchronization Delay, Maximum Shutdown Time,
- Shutdown Delay, Return Delay, Return Battery Capacity, and
- Return Battery Capacity Offset will be used
- to execute the Reboot command.
-
- Setting this value to noRebootUps(1) has no effect.
-
- The value noRebootUps(1) will always be returned
- when the variable is read."
- ::= { upsAdvControl 2 }
-
-upsAdvControlUpsSleep OBJECT-TYPE
- SYNTAX INTEGER {
- noPutUpsToSleep(1),
- putUpsToSleep(2),
- putUpsToSleepGracefully(3),
- putUpsSyncGroupToSleep(4),
- putUpsSyncGroupToSleepGracefully(5)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to putUpsToSleep(2) causes
- the UPS to go to sleep for the time specified by
- upsAdvConfigUpsSleepTime.
-
- Setting this variable to putUpsToSleepGracefully(3)
- causes the UPS to go to sleep for the time specified
- by upsAdvConfigUpsSleepTime after a delay period.
- This allows the host to shut down in a graceful manner.
-
- If this UPS is an active member of a Synchronized Control
- Group (SCG), the putUpsSyncGroupToSleep(4) command will perform
- a Synchronized Sleep of all active Group members regardless
- of their current AC output status. This unit's Power
- Synchronization Delay, Shutdown Delay, Sleep Time,
- and Return Delay will be used to execute the sleep command.
-
- If this UPS is an active member of a SCG the
- putUpsSyncGroupToSleepGracefully(5) command will perform a
- Synchronized Sleep Gracefully of all active Group members
- regardless of their current AC output status. This unit's
- Power Synchronization Delay, Maximum Shutdown Time, Shutdown
- Delay, Sleep Time, and Return Delay to execute the sleep
- command.
-
- When in sleep mode, the UPS will not provide output
- power regardless of the input line state. Once the
- specified time has elapsed, output power will be
- restored.
-
- Setting this value to noPutUpsToSleep(1) has no
- effect.
-
- The value noPutUpsToSleep(1) will always be returned
- when the variable is read."
- ::= { upsAdvControl 3 }
-
-
-upsAdvControlSimulatePowerFail OBJECT-TYPE
- SYNTAX INTEGER {
- noSimulatePowerFailure(1),
- simulatePowerFailure(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to simulatePowerFailure(2) causes
- the UPS switch to battery power.
-
- Setting this value to noSimulatePowerFailure(1) has no
- effect.
-
- The value noSimulatePowerFailure(1) will always be returned
- when the variable is read."
- ::= { upsAdvControl 4 }
-
-
-upsAdvControlFlashAndBeep OBJECT-TYPE
- SYNTAX INTEGER {
- noFlashAndBeep(1),
- flashAndBeep(2),
- flashAndBeepSyncGroup(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to flashAndBeep(2) causes the
- UPS to beep and simultaneously turn on the UPS front
- panel lights (Smart-UPS only).
-
- If this UPS is an active member of a Synchronized Control
- Group (SCG), the flashAndBeepSyncGroup(3) command will
- Flash and Beep all active Group members regardless of
- current AC output status.
-
- Setting this value to noFlashAndBeep(1) has no
- effect.
-
- The value noFlashAndBeep(1) will always be returned
- when the variable is read."
- ::= { upsAdvControl 5 }
-
-
-upsAdvControlTurnOnUPS OBJECT-TYPE
- SYNTAX INTEGER {
- noTurnOnUPS(1),
- turnOnUPS(2),
- turnOnUPSSyncGroup(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to turnOnUPS(2) causes the
- UPS to be turned on immediately.
-
- If this UPS is an active member of a Synchronized Control
- Group (SCG), the turnOnUPSSyncGroup(3) command will perform
- a Synchronized Turn On of all active Group members
- regardless of their current AC output status.
-
- Setting this value to noTurnOnUPS(1) has no
- effect.
-
- The value noTurnOnUPS(1) will always be returned
- when the variable is read."
- ::= { upsAdvControl 6 }
-
-upsAdvControlBypassSwitch OBJECT-TYPE
- SYNTAX INTEGER {
- noBypassSwitch (1),
- switchToBypass (2),
- switchOutOfBypass(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This switch puts the UPS in or out of bypass mode."
- ::= { upsAdvControl 7 }
-
-
--- the upsTest group
-
--- the upsBasicTest group
-
--- the upsAdvTest group
-
-upsAdvTestDiagnosticSchedule OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- biweekly(2),
- weekly(3),
- atTurnOn(4),
- never(5)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The UPS system's automatic battery test schedule."
- ::= { upsAdvTest 1 }
-
-
-upsAdvTestDiagnostics OBJECT-TYPE
- SYNTAX INTEGER {
- noTestDiagnostics(1),
- testDiagnostics(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to testDiagnostics(2) causes
- the UPS to perform a diagnostic self test.
-
- Setting this value to noTestDiagnostics(1) has no
- effect.
-
- The value noTestDiagnostics(1) will always be returned
- when the variable is read."
- ::= { upsAdvTest 2 }
-
-upsAdvTestDiagnosticsResults OBJECT-TYPE
- SYNTAX INTEGER {
- ok(1),
- failed(2),
- invalidTest(3),
- testInProgress(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The results of the last UPS diagnostics test performed."
- ::= { upsAdvTest 3 }
-
-upsAdvTestLastDiagnosticsDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date the last UPS diagnostics test was performed in
- mm/dd/yy format."
- ::= { upsAdvTest 4 }
-
-upsAdvTestRuntimeCalibration OBJECT-TYPE
- SYNTAX INTEGER {
- noPerformCalibration(1),
- performCalibration(2),
- cancelCurrentCalibration(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to performCalibration(2) causes
- the UPS to discharge to calibrate the UPS.
- The test will only start if the battery capacity is 100%.
- The test runs until capacity is less than 25%.
-
- Setting this variable to cancelCurrentCalibration(3)
- after setting performCalibration(2) will cancel the
- current discharge.
-
- Setting this variable to noPerformCalibration(1)
- will have no effect.
-
- The value noPerformCalibration(1) will always be returned
- when the variable is read.
-
- The result of the calibration will be saved in
- upsAdvTestCalibrationResult."
- ::= { upsAdvTest 5 }
-
-upsAdvTestCalibrationResults OBJECT-TYPE
- SYNTAX INTEGER {
- ok(1),
- invalidCalibration(2),
- calibrationInProgress(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The results of the last runtime calibration.
-
- Value ok(1) means a successful runtime calibration.
-
- Value invalidCalibration(2) indicates last calibration did
- not take place since the battery capacity was below
- 100%.
-
- Value calibrationInProgress(3) means a calibration
- is occurring now. "
- ::= { upsAdvTest 6 }
-
-upsAdvTestCalibrationDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date the last UPS runtime calibration was
- performed in mm/dd/yy format."
- ::= { upsAdvTest 7 }
-
--- the upsComm group
-
-upsCommStatus OBJECT-TYPE
- SYNTAX INTEGER {
- ok(1),
- noComm(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of agent's communication with UPS. "
- ::= { upsComm 1 }
-
-
--- the measureUps group
--- the Environ group
-
-mUpsEnvironAmbientTemperature OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The ambient temperature in Celsius for Probe 1."
- ::= { mUpsEnviron 1 }
-
-mUpsEnvironRelativeHumidity OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The relative humidity as a percentage for Probe 1."
- ::= { mUpsEnviron 2 }
-
-
-mUpsEnvironAmbientTemperature2 OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The ambient temperature in Celsius for Probe 2."
- ::= { mUpsEnviron 3 }
-
-mUpsEnvironRelativeHumidity2 OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The relative humidity as a percentage for Probe 2."
- ::= { mUpsEnviron 4 }
-
--- the mUpsContact group
-
-mUpsContactNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts supported by the Measure-UPS."
- ::= { mUpsContact 1 }
-
-mUpsContactTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ContactEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the Measure-UPS."
- ::= { mUpsContact 2 }
-
-mUpsContactEntry OBJECT-TYPE
- SYNTAX ContactEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A contact entry containing information for a given contact."
- INDEX { contactNumber }
- ::= { mUpsContactTable 1 }
-
-ContactEntry ::=
- SEQUENCE {
- contactNumber
- INTEGER,
- normalState
- INTEGER,
- description
- DisplayString,
- monitoringStatus
- INTEGER,
- currentStatus
- INTEGER
- }
-
-contactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index identifying the contact on the Measure-UPS."
- ::= { mUpsContactEntry 1 }
-
-normalState OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- open(2),
- closed(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The normal operating position of the contact. If the normal
- operating position cannot be set then it is controlled via the
- dip switch on the Measure-UPS and is therefore read-only."
- ::= { mUpsContactEntry 2 }
-
-description OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The description of the purpose/use of the contact."
- ::= { mUpsContactEntry 3 }
-
-monitoringStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- enabled(2),
- disabled(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A flag indicating whether this contact is
- monitored, or not."
- ::= { mUpsContactEntry 4 }
-
-currentStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- noFault(2),
- fault(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This value indicates the current state of the contact.
- If the contact is not in its normal state. This value
- is set to fault(2)."
- ::= { mUpsContactEntry 5 }
-
--- Three Phase Group
-
---
--- Reset Max/Min Values Group
---
-
- upsPhaseResetMaxMinValues OBJECT-TYPE
- SYNTAX INTEGER {
- none (1),
- reset (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Reset the maximum and minimum UPS values:
- upsPhaseInputMaxVoltage, upsPhaseInputMinVoltage,
- upsPhaseInputMaxCurrent, upsPhaseInputMinCurrent,
- upsPhaseInputMaxPower, upsPhaseInputMinPower,
- upsPhaseOutputMaxCurrent, upsPhaseOutputMinCurrent,
- upsPhaseOutputMaxLoad, upsPhaseOutputMinLoad,
- upsPhaseOutputMaxPercentLoad, upsPhaseOutputMinPercentLoad,
- upsPhaseOutputMaxPower, upsPhaseOutputMinPower,
- upsPhaseOutputMaxPercentPower, upsPhaseOutputMinPercentPower."
- ::= { upsPhaseResetValues 1 }
-
---
--- Input Group
---
-
--- Number of Inputs
-
- upsPhaseNumInputs OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input feeds to this device.
- This variable indicates the number of rows in the
- input table."
- ::= { upsPhaseInput 1 }
-
--- Input Table
-
- upsPhaseInputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsPhaseInputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of input table entries. The number of entries
- is given by the value of upsPhaseNumInputs."
- ::= { upsPhaseInput 2 }
-
- upsPhaseInputEntry OBJECT-TYPE
- SYNTAX UpsPhaseInputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular input."
- INDEX { upsPhaseInputTableIndex }
- ::= { upsPhaseInputTable 1 }
-
- UpsPhaseInputEntry ::= SEQUENCE {
- upsPhaseInputTableIndex INTEGER,
- upsPhaseNumInputPhases INTEGER,
- upsPhaseInputVoltageOrientation INTEGER,
- upsPhaseInputFrequency INTEGER,
- upsPhaseInputType INTEGER,
- upsPhaseInputName DisplayString
- }
-
- upsPhaseInputTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input identifier."
- ::= { upsPhaseInputEntry 1 }
-
- upsPhaseNumInputPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input phases utilized in this
- device. The sum of all the upsPhaseNumInputPhases
- variable indicates the number of rows in the
- input phase table."
- ::= { upsPhaseInputEntry 2 }
-
- upsPhaseInputVoltageOrientation OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- singlePhase(2),
- splitPhase(3),
- threePhasePhaseToNeutral(4),
- threePhasePhaseToPhase(5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input voltage orientation:
- 1: unknown for this UPS
- 2: singlePhase - phase 1 voltage is between Phase 1
- and Neutral.
- 3: splitPhase - phase 1 voltage is between Phase 1 and
- Neutral; phase 2 voltage is between Phase 2 and Neutral;
- phase 3 voltage is between Phase 1 and Phase2.
- 4: threePhasePhaseToNeutral - phase 1 voltage is between
- Phase 1 and Neutral; phase 2 voltage is between Phase 2
- and Neutral; phase 3 voltage is between Phase3 and
- Neutral.
- 5: threePhasePhaseToPhase - phase 1 voltage is between
- Phase 1 and Phase 2; phase 2 voltage is between Phase 2
- and Phase 3; phase 3 voltage is between Phase 3 and
- Phase 1."
- ::= { upsPhaseInputEntry 3 }
-
- upsPhaseInputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input frequency in 0.1 Hertz, or -1 if it's unsupported
- by this UPS."
- ::= { upsPhaseInputEntry 4 }
-
- upsPhaseInputType OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- main(2),
- bypass(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input type."
- ::= { upsPhaseInputEntry 5 }
-
- upsPhaseInputName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A name given to a particular input."
- ::= { upsPhaseInputEntry 6 }
-
--- Input Phase Table
-
- upsPhaseInputPhaseTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsPhaseInputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of input table entries. The number of entries
- is given by the sum of the upsPhaseNumInputPhases."
- ::= { upsPhaseInput 3 }
-
- upsPhaseInputPhaseEntry OBJECT-TYPE
- SYNTAX UpsPhaseInputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular input phase."
- INDEX { upsPhaseInputPhaseTableIndex, upsPhaseInputPhaseIndex }
- ::= { upsPhaseInputPhaseTable 1 }
-
- UpsPhaseInputPhaseEntry ::= SEQUENCE {
- upsPhaseInputPhaseTableIndex INTEGER,
- upsPhaseInputPhaseIndex INTEGER,
- upsPhaseInputVoltage INTEGER,
- upsPhaseInputMaxVoltage INTEGER,
- upsPhaseInputMinVoltage INTEGER,
- upsPhaseInputCurrent INTEGER,
- upsPhaseInputMaxCurrent INTEGER,
- upsPhaseInputMinCurrent INTEGER,
- upsPhaseInputPower INTEGER,
- upsPhaseInputMaxPower INTEGER,
- upsPhaseInputMinPower INTEGER
- }
-
- upsPhaseInputPhaseTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input identifier."
- ::= { upsPhaseInputPhaseEntry 1 }
-
- upsPhaseInputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input phase identifier."
- ::= { upsPhaseInputPhaseEntry 2 }
-
- upsPhaseInputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input voltage in VAC, or -1 if it's unsupported
- by this UPS."
- ::= { upsPhaseInputPhaseEntry 3 }
-
- upsPhaseInputMaxVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum input voltage in VAC measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseInputPhaseEntry 4 }
-
- upsPhaseInputMinVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum input voltage in VAC measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseInputPhaseEntry 5 }
-
- upsPhaseInputCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input current in 0.1 amperes, or -1 if it's
- unsupported by this UPS."
- ::= { upsPhaseInputPhaseEntry 6 }
-
- upsPhaseInputMaxCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum input current in 0.1 amperes measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseInputPhaseEntry 7 }
-
- upsPhaseInputMinCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum input current in 0.1 amperes measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseInputPhaseEntry 8 }
-
- upsPhaseInputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input power in Watts, or -1 if it's unsupported
- by this UPS."
- ::= { upsPhaseInputPhaseEntry 9 }
-
- upsPhaseInputMaxPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum input power in Watts measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseInputPhaseEntry 10 }
-
- upsPhaseInputMinPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum input power in Watts measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseInputPhaseEntry 11 }
-
- --
- -- The Output group.
- --
-
- -- Number of Outputs
-
- upsPhaseNumOutputs OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output feeds to this device.
- This variable indicates the number of rows in the
- output table."
- ::= { upsPhaseOutput 1 }
-
- -- Output Table
-
- upsPhaseOutputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsPhaseOutputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output table entries. The number of entries
- is given by the value of upsOutputNumPhases."
- ::= { upsPhaseOutput 2 }
-
- upsPhaseOutputEntry OBJECT-TYPE
- SYNTAX UpsPhaseOutputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular output."
- INDEX { upsPhaseOutputTableIndex }
- ::= { upsPhaseOutputTable 1 }
-
- UpsPhaseOutputEntry ::= SEQUENCE {
- upsPhaseOutputTableIndex INTEGER,
- upsPhaseNumOutputPhases INTEGER,
- upsPhaseOutputVoltageOrientation INTEGER,
- upsPhaseOutputFrequency INTEGER
- }
-
- upsPhaseOutputTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output identifier."
- ::= { upsPhaseOutputEntry 1 }
-
- upsPhaseNumOutputPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output phases utilized in this
- device. The sum of all the upsPhaseNumOutputPhases
- variable indicates the number of rows in the
- output phase table."
- ::= { upsPhaseOutputEntry 2 }
-
- upsPhaseOutputVoltageOrientation OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- singlePhase(2),
- splitPhase(3),
- threePhasePhaseToNeutral(4),
- threePhasePhaseToPhase(5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output voltage orientation:
- 1: unknown for this UPS
- 2: singlePhase - phase 1 voltage is between Phase 1
- and Neutral.
- 3: splitPhase - phase 1 voltage is between Phase 1 and
- Neutral; phase 2 voltage is between Phase 2 and Neutral;
- phase 3 voltage is between Phase 1 and Phase2.
- 4: threePhasePhaseToNeutral - phase 1 voltage is between
- Phase 1 and Neutral; phase 2 voltage is between Phase 2
- and Neutral; phase 3 voltage is between Phase3 and
- Neutral.
- 5: threePhasePhaseToPhase - phase 1 voltage is between
- Phase 1 and Phase 2; phase 2 voltage is between Phase 2
- and Phase 3; phase 3 voltage is between Phase 3 and
- Phase 1."
- ::= { upsPhaseOutputEntry 3 }
-
- upsPhaseOutputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output frequency in 0.1 Hertz, or -1 if it's
- unsupported by this UPS."
- ::= { upsPhaseOutputEntry 4 }
-
- -- Output Phase Table
-
- upsPhaseOutputPhaseTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsPhaseOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output table entries. The number of
- entries is given by the sum of the upsPhaseNumOutputPhases."
- ::= { upsPhaseOutput 3 }
-
- upsPhaseOutputPhaseEntry OBJECT-TYPE
- SYNTAX UpsPhaseOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular output phase."
- INDEX { upsPhaseOutputPhaseTableIndex, upsPhaseOutputPhaseIndex }
- ::= { upsPhaseOutputPhaseTable 1 }
-
- UpsPhaseOutputPhaseEntry ::= SEQUENCE {
- upsPhaseOutputPhaseTableIndex INTEGER,
- upsPhaseOutputPhaseIndex INTEGER,
- upsPhaseOutputVoltage INTEGER,
- upsPhaseOutputCurrent INTEGER,
- upsPhaseOutputMaxCurrent INTEGER,
- upsPhaseOutputMinCurrent INTEGER,
- upsPhaseOutputLoad INTEGER,
- upsPhaseOutputMaxLoad INTEGER,
- upsPhaseOutputMinLoad INTEGER,
- upsPhaseOutputPercentLoad INTEGER,
- upsPhaseOutputMaxPercentLoad INTEGER,
- upsPhaseOutputMinPercentLoad INTEGER,
- upsPhaseOutputPower INTEGER,
- upsPhaseOutputMaxPower INTEGER,
- upsPhaseOutputMinPower INTEGER,
- upsPhaseOutputPercentPower INTEGER,
- upsPhaseOutputMaxPercentPower INTEGER,
- upsPhaseOutputMinPercentPower INTEGER
- }
-
- upsPhaseOutputPhaseTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output identifier."
- ::= { upsPhaseOutputPhaseEntry 1 }
-
- upsPhaseOutputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output phase identifier."
- ::= { upsPhaseOutputPhaseEntry 2 }
-
- upsPhaseOutputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output voltage in VAC, or -1 if it's unsupported
- by this UPS."
- ::= { upsPhaseOutputPhaseEntry 3 }
-
- upsPhaseOutputCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output current in 0.1 amperes drawn
- by the load on the UPS, or -1 if it's unsupported
- by this UPS."
- ::= { upsPhaseOutputPhaseEntry 4 }
-
- upsPhaseOutputMaxCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum output current in 0.1 amperes measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 5 }
-
- upsPhaseOutputMinCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum output current in 0.1 amperes measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 6 }
-
- upsPhaseOutputLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output load in VA, or -1 if it's unsupported
- by this UPS."
- ::= { upsPhaseOutputPhaseEntry 7 }
-
- upsPhaseOutputMaxLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum output load in VA measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 8 }
-
- upsPhaseOutputMinLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum output load in VA measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 9 }
-
- upsPhaseOutputPercentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The percentage of the UPS load capacity in VA at
- redundancy @ (n + x) presently being used on this
- output phase, or -1 if it's unsupported by this UPS."
- ::= { upsPhaseOutputPhaseEntry 10 }
-
- upsPhaseOutputMaxPercentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum percentage of the UPS load capacity in
- VA measured at redundancy @ (n + x) presently
- being used on this output phase since the last reset
- (upsPhaseResetMaxMinValues), or -1 if it's unsupported
- by this UPS. Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 11 }
-
- upsPhaseOutputMinPercentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum percentage of the UPS load capacity in
- VA measured at redundancy @ (n + x) presently
- being used on this output phase since the last reset
- (upsPhaseResetMaxMinValues), or -1 if it's unsupported
- by this UPS. Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 12 }
-
- upsPhaseOutputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output power in Watts, or -1 if it's
- unsupported by this UPS."
- ::= { upsPhaseOutputPhaseEntry 13 }
-
- upsPhaseOutputMaxPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum output power in Watts measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 14 }
-
- upsPhaseOutputMinPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum output power in Watts measured
- since the last reset (upsPhaseResetMaxMinValues), or
- -1 if it's unsupported by this UPS.
- Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 15 }
-
- upsPhaseOutputPercentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The percentage of the UPS power capacity in Watts at
- redundancy @ (n + x) presently being used on this
- output phase, or -1 if it's unsupported by this UPS."
- ::= { upsPhaseOutputPhaseEntry 16 }
-
- upsPhaseOutputMaxPercentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum percentage of the UPS power capacity
- in Watts measured at redundancy @ (n + x) presently
- being used on this output phase since the last
- reset (upsPhaseResetMaxMinValues), or -1 if it's
- unsupported by this UPS. Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 17 }
-
- upsPhaseOutputMinPercentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum percentage of the UPS power capacity
- in Watts measured at redundancy @ (n + x) presently
- being used on this output phase since the last
- reset (upsPhaseResetMaxMinValues), or -1 if it's
- unsupported by this UPS. Sampled every 30 seconds."
- ::= { upsPhaseOutputPhaseEntry 18 }
-
--- the upsOutletGroupStatus group
-
-upsOutletGroupStatusTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of outlet groups for the UPS."
- ::= { upsOutletGroupStatus 1 }
-
-upsOutletGroupStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsOutletGroupStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting status of the outlet groups. The number of
- entries is contained in the upsOutletGroupStatusTableSize OID."
- ::= { upsOutletGroupStatus 2 }
-
-upsOutletGroupStatusEntry OBJECT-TYPE
- SYNTAX UpsOutletGroupStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlet group status to get."
- INDEX { upsOutletGroupStatusIndex}
- ::= { upsOutletGroupStatusTable 1 }
-
-UpsOutletGroupStatusEntry ::=
- SEQUENCE {
- upsOutletGroupStatusIndex INTEGER,
- upsOutletGroupStatusName DisplayString,
- upsOutletGroupStatusGroupState INTEGER,
- upsOutletGroupStatusCommandPending INTEGER
- }
-
-upsOutletGroupStatusIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet group entry."
- ::= { upsOutletGroupStatusEntry 1 }
-
-upsOutletGroupStatusName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet group. This OID is provided
- for informational purposes only. This value is set
- by the upsOutletGroupConfigName OID."
- ::= { upsOutletGroupStatusEntry 2 }
-
-upsOutletGroupStatusGroupState OBJECT-TYPE
- SYNTAX INTEGER {
- upsOutletGroupStatusOn (1),
- upsOutletGroupStatusOff (2),
- upsOutletGroupStatusUnknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet group state. If the outlet
- group is on, the upsOutletGroupStatusOn (1) value will be returned. If
- the outlet group is off, the upsOutletGroupStatusOff (2) value will be
- returned. If the state of the outlet group cannot be determined, the
- upsOutletGroupStatusUnknown (3) value will be returned."
-
- ::= { upsOutletGroupStatusEntry 3 }
-
-upsOutletGroupStatusCommandPending OBJECT-TYPE
- SYNTAX INTEGER {
- upsOutletGroupCommandPending (1),
- upsOutletGroupNoCommandPending (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the command pending
- state of the outlet group. If a command is pending on the
- outlet group, the upsOutletGroupCommandPending (1) value
- will be returned. If there is not a command pending
- on the outlet group, the upsOutletGroupNoCommandPending (2)
- will be returned."
- ::= { upsOutletGroupStatusEntry 4 }
-
--- the upsOutletGroupConfig group
-
-upsOutletGroupConfigTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of outlet groups for the UPS."
- ::= { upsOutletGroupConfig 1 }
-
-upsOutletGroupConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsOutletGroupConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The list of outlet groups to configure. The number of entries
- is defined by the upsOutletGroupConfigTableSize OID."
- ::= { upsOutletGroupConfig 2 }
-
-upsOutletGroupConfigEntry OBJECT-TYPE
- SYNTAX UpsOutletGroupConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlet groups to configure."
- INDEX { upsOutletGroupConfigIndex}
- ::= { upsOutletGroupConfigTable 1 }
-
-UpsOutletGroupConfigEntry ::=
- SEQUENCE {
- upsOutletGroupConfigIndex INTEGER,
- upsOutletGroupConfigName DisplayString,
- upsOutletGroupConfigPowerOnDelay INTEGER,
- upsOutletGroupConfigPowerOffDelay INTEGER,
- upsOutletGroupConfigRebootDuration INTEGER
- }
-
-upsOutletGroupConfigIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet group entry."
- ::= { upsOutletGroupConfigEntry 1 }
-
-upsOutletGroupConfigName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet group."
- ::= { upsOutletGroupConfigEntry 2 }
-
-upsOutletGroupConfigPowerOnDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet group will delay
- powering on when the delayed on or reboot command is applied.
- Allowed values are -1 (for Never) or 0 to 600 seconds."
- ::= { upsOutletGroupConfigEntry 3 }
-
-upsOutletGroupConfigPowerOffDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet group will delay
- powering off when the delayed off command is applied.
- Allowed values are 0 to 600 seconds."
- ::= { upsOutletGroupConfigEntry 4 }
-
-upsOutletGroupConfigRebootDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "During a reboot sequence, power is turned off and then
- back on. This OID defines the amount of time to wait,
- in seconds, after turning the power off, at the start
- of the sequence, before initiating the power on sequence.
- Allowed values are 0 to 600 seconds."
- ::= { upsOutletGroupConfigEntry 5 }
-
--- the upsOutletGroupControl group
-
-upsOutletGroupControlTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of outlet groups for the UPS."
- ::= { upsOutletGroupControl 1 }
-
-upsOutletGroupControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsOutletGroupControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual outlet groups. The number of
- entries is contained in the upsOutletGroupControlTableSize OID."
- ::= { upsOutletGroupControl 2 }
-
-upsOutletGroupControlEntry OBJECT-TYPE
- SYNTAX UpsOutletGroupControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlet group to control."
- INDEX { upsOutletGroupControlIndex}
- ::= { upsOutletGroupControlTable 1 }
-
-UpsOutletGroupControlEntry ::=
- SEQUENCE {
- upsOutletGroupControlIndex INTEGER,
- upsOutletGroupControlName DisplayString,
- upsOutletGroupControlCommand INTEGER
- }
-
-upsOutletGroupControlIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet group entry."
- ::= { upsOutletGroupControlEntry 1 }
-
-upsOutletGroupControlName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet group. This OID is provided
- for informational purposes only. This value is set
- by the upsOutletGroupConfigName OID."
- ::= { upsOutletGroupControlEntry 2 }
-
-upsOutletGroupControlCommand OBJECT-TYPE
- SYNTAX INTEGER {
- upsOutletGroupImmediateOn (1),
- upsOutletGroupImmediateOff (2),
- upsOutletGroupImmediateReboot (3),
- upsOutletGroupDelayedOn (4),
- upsOutletGroupDelayedOff (5),
- upsOutletGroupDelayedReboot (6),
- upsOutletGroupCancelPendingCommand (7),
- upsOutletGroupControlUnknown (8)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet group state. If the outlet
- group is on, the upsOutletGroupImmediateOn (1) value will be returned. If
- the outlet group is off, the upsOutletGroupImmediateOff (2) value will be
- returned.
-
- If the state of the outlet group cannot be determined, the
- upsOutletGroupControlUnknown (8) value will be returned.
-
- Setting this variable to upsOutletGroupImmediateOn (1) will turn the
- outlet group on.
-
- Setting this variable to upsOutletGroupImmediateOff (2) will turn the
- outlet group off.
-
- Setting this variable to upsOutletGroupImmediateReboot (3) will turn the outlet
- group off, wait the upsOutletGroupConfigRebootDuration OID time, wait the
- upsOutletGroupConfigPowerOnDelay OID, and then turn the outlet group on.
-
- Setting this variable to upsOutletGroupDelayedOn (4) will turn the outlet
- group on after the upsOutletGroupConfigPowerOnDelay OID has elapsed.
-
- Setting this variable to upsOutletGroupDelayedOff (5) will turn the outlet
- group off after the upsOutletGroupConfigPowerOffDelay OID has elapsed.
-
- Setting this variable to upsOutletGroupDelayedReboot (6) will turn the outlet
- group off after the upsOutletGroupConfigPowerOffDelay OID has elapsed, wait the
- upsOutletGroupConfigRebootDuration OID time, wait the
- upsOutletGroupConfigPowerOnDelay OID, and then turn the outlet group on.
-
- Setting this variable to upsOutletGroupCancelPendingCommand (7) will
- cause any pending command to this outlet group to be canceled."
- ::= { upsOutletGroupControlEntry 3 }
-
--- the upsDiagnosticIM group
-
-upsDiagIMTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Intelligence Modules in or attached to the UPS."
- ::= { upsDiagnosticIM 1 }
-
-upsDiagIMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagIMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual Intelligence Modules. The number of
- entries is contained in the upsDiagIMTableSize OID."
- ::= { upsDiagnosticIM 2 }
-
-upsDiagIMEntry OBJECT-TYPE
- SYNTAX UpsDiagIMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics and information of an Intelligence Module."
- INDEX { upsDiagIMIndex}
- ::= { upsDiagIMTable 1 }
-
-UpsDiagIMEntry ::=
- SEQUENCE {
- upsDiagIMIndex INTEGER,
- upsDiagIMType INTEGER,
- upsDiagIMStatus INTEGER,
- upsDiagIMFirmwareRev DisplayString,
- upsDiagIMSlaveFirmwareRev DisplayString,
- upsDiagIMHardwareRev DisplayString,
- upsDiagIMSerialNum DisplayString,
- upsDiagIMManufactureDate DisplayString
- }
-
-upsDiagIMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Intelligence Module entry."
- ::= { upsDiagIMEntry 1 }
-
-upsDiagIMType OBJECT-TYPE
- SYNTAX INTEGER {
- imUnknown (1),
- imMIM (2),
- imRIM (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of the Intelligence Module.
- imUnknown(1) indicates the IM type is unknown.
- imMIM(2) indicates the IM type is a Main Intelligence Module.
- imRIM(3) indicates the IM type is Redundant Intelligence Module."
- ::= { upsDiagIMEntry 2 }
-
-upsDiagIMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Intelligence Module.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagIMEntry 3 }
-
-upsDiagIMFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the Intelligence Module."
- ::= { upsDiagIMEntry 4 }
-
-upsDiagIMSlaveFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The slave firmware revision of the Intelligence Module."
- ::= { upsDiagIMEntry 5 }
-
-upsDiagIMHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the Intelligence Module."
- ::= { upsDiagIMEntry 6 }
-
-upsDiagIMSerialNum OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the Intelligence Module."
- ::= { upsDiagIMEntry 7 }
-
-upsDiagIMManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The manufacture date of the Intelligence Module."
- ::= { upsDiagIMEntry 8 }
-
--- the upsDiagnosticPowerModules group
-
-upsDiagPMTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Power Modules in or attached to the UPS."
- ::= { upsDiagnosticPowerModules 1 }
-
-upsDiagPMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagPMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of Individual Power modules. The number of
- entries is contained in the upsDiagPMTableSize OID."
- ::= { upsDiagnosticPowerModules 2 }
-
-upsDiagPMEntry OBJECT-TYPE
- SYNTAX UpsDiagPMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of an Power Module."
- INDEX { upsDiagPMIndex}
- ::= { upsDiagPMTable 1 }
-
-UpsDiagPMEntry ::=
- SEQUENCE {
- upsDiagPMIndex INTEGER,
- upsDiagPMStatus INTEGER,
- upsDiagPMFirmwareRev DisplayString,
- upsDiagPMHardwareRev DisplayString,
- upsDiagPMSerialNum DisplayString,
- upsDiagPMManufactureDate DisplayString
- }
-
-upsDiagPMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Power Module entry."
- ::= { upsDiagPMEntry 1 }
-
-upsDiagPMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Power Module.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagPMEntry 2 }
-
-upsDiagPMFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the Power Module."
- ::= { upsDiagPMEntry 3 }
-
-upsDiagPMHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the Power Module."
- ::= { upsDiagPMEntry 4 }
-
-upsDiagPMSerialNum OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the Power Module."
- ::= { upsDiagPMEntry 5 }
-
-upsDiagPMManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The manufacture date of the Power Module."
- ::= { upsDiagPMEntry 6 }
-
--- the upsDiagnosticBatteries group
-
-upsDiagBatteryTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of batteries in or attached to the UPS."
- ::= { upsDiagnosticBatteries 1 }
-
-upsDiagBatteryTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagBatteryEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual batteries. The number of
- entries is contained in the upsDiagBattTableSize OID."
- ::= { upsDiagnosticBatteries 2 }
-
-upsDiagBatteryEntry OBJECT-TYPE
- SYNTAX UpsDiagBatteryEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of a battery."
- INDEX { upsDiagBatteryIndex}
- ::= { upsDiagBatteryTable 1 }
-
-UpsDiagBatteryEntry ::=
- SEQUENCE {
- upsDiagBatteryFrameIndex INTEGER,
- upsDiagBatteryIndex INTEGER,
- upsDiagBatteryStatus INTEGER,
- upsDiagBatterySerialNumber DisplayString,
- upsDiagBatteryFirmwareRev DisplayString,
- upsDiagBatteryManufactureDate DisplayString,
- upsDiagBatteryType DisplayString
- }
-
-upsDiagBatteryFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the battery frame entry.
- Frame 0 indicates the Main frame. Extended Run (XR) frames
- start from index 1."
- ::= { upsDiagBatteryEntry 1 }
-
-upsDiagBatteryIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the battery entry."
- ::= { upsDiagBatteryEntry 2 }
-
-upsDiagBatteryStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- failed (4),
- highTemperature (5),
- replaceImmediately (6),
- lowCapacity (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the battery.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the battery status is OK.
- failed(4) indicates the battery status is failed.
- highTemperature(5) indicates the battery has a high temperature condition.
- replaceImmediately(6) indicates the battery must be replaced immediately.
- lowCapacity(7) indicates the battery has a low capacity."
- ::= { upsDiagBatteryEntry 3 }
-
-upsDiagBatterySerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the battery."
- ::= { upsDiagBatteryEntry 4 }
-
-upsDiagBatteryFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the battery."
- ::= { upsDiagBatteryEntry 5 }
-
-upsDiagBatteryManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The manufacture date of the battery."
- ::= { upsDiagBatteryEntry 6 }
-
-upsDiagBatteryType OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The battery type or rating for the battery."
- ::= { upsDiagBatteryEntry 7 }
-
--- the upsDiagnosticSubsystem group
-
-upsDiagSubSysFrameTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of frames attached to the UPS including the Main frame."
- ::= { upsDiagnosticSubsystem 1 }
-
-upsDiagSubSysFrameTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysFrameEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual XR Frames."
- ::= { upsDiagnosticSubsystem 2 }
-
-upsDiagSubSysFrameEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysFrameEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of an XR Frame."
- INDEX { upsDiagSubSysFrameIndex}
- ::= { upsDiagSubSysFrameTable 1 }
-
-UpsDiagSubSysFrameEntry ::=
- SEQUENCE {
- upsDiagSubSysFrameIndex INTEGER,
- upsDiagSubSysFrameType INTEGER,
- upsDiagSubSysFrameFirmwareRev DisplayString,
- upsDiagSubSysFrameHardwareRev DisplayString,
- upsDiagSubSysFrameSerialNum DisplayString,
- upsDiagSubSysFrameManufactureDate DisplayString
- }
-
-upsDiagSubSysFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysFrameEntry 1 }
-
-upsDiagSubSysFrameType OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- frameTypeMain (3),
- frameTypeXR (4),
- frameTypeLXR (5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The type of Frame.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- frameTypeMain(3) indicates the the frame type is the Main Frame.
- frameTypeXR(4) indicates the frame type is an XR Frame.
- frameTypeLXR(5) indicates the frame type is an LXR Frame."
- ::= { upsDiagSubSysFrameEntry 2 }
-
-upsDiagSubSysFrameFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the frame."
- ::= { upsDiagSubSysFrameEntry 3 }
-
-upsDiagSubSysFrameHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the frame."
- ::= { upsDiagSubSysFrameEntry 4 }
-
-upsDiagSubSysFrameSerialNum OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the frame."
- ::= { upsDiagSubSysFrameEntry 5 }
-
-upsDiagSubSysFrameManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The manufacture date of the frame."
- ::= { upsDiagSubSysFrameEntry 6 }
-
-upsDiagSubSysIntBypSwitchTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Internal Bypass switches attached to the UPS."
- ::= { upsDiagnosticSubsystem 3 }
-
-upsDiagSubSysIntBypSwitchTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysIntBypSwitchEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of the Internal Bypass Switch."
- ::= { upsDiagnosticSubsystem 4 }
-
-upsDiagSubSysIntBypSwitchEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysIntBypSwitchEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of the Internal Bypass Switch."
- INDEX { upsDiagSubSysIntBypSwitchIndex}
- ::= { upsDiagSubSysIntBypSwitchTable 1 }
-
-UpsDiagSubSysIntBypSwitchEntry ::=
- SEQUENCE {
- upsDiagSubSysIntBypSwitchFrameIndex INTEGER,
- upsDiagSubSysIntBypSwitchIndex INTEGER,
- upsDiagSubSysIntBypSwitchStatus INTEGER,
- upsDiagSubSysIntBypSwitchFirmwareRev DisplayString,
- upsDiagSubSysIntBypSwitchHardwareRev DisplayString,
- upsDiagSubSysIntBypSwitchSerialNum DisplayString,
- upsDiagSubSysIntBypSwitchManufactureDate DisplayString
- }
-
-upsDiagSubSysIntBypSwitchFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysIntBypSwitchEntry 1 }
-
-upsDiagSubSysIntBypSwitchIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Internal Bypass Switch index entry."
- ::= { upsDiagSubSysIntBypSwitchEntry 2 }
-
-upsDiagSubSysIntBypSwitchStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Internal Bypass Switch status.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysIntBypSwitchEntry 3 }
-
-upsDiagSubSysIntBypSwitchFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the Internal Bypass Switch."
- ::= { upsDiagSubSysIntBypSwitchEntry 4 }
-
-upsDiagSubSysIntBypSwitchHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the Internal Bypass Switch."
- ::= { upsDiagSubSysIntBypSwitchEntry 5 }
-
-upsDiagSubSysIntBypSwitchSerialNum OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the Internal Bypass Switch."
- ::= { upsDiagSubSysIntBypSwitchEntry 6 }
-
-upsDiagSubSysIntBypSwitchManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The manufacture date of the Internal Bypass Switch."
- ::= { upsDiagSubSysIntBypSwitchEntry 7 }
-
-upsDiagSubSysBattMonitorTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Battery Monitor Boards attached to the UPS."
- ::= { upsDiagnosticSubsystem 5 }
-
-upsDiagSubSysBattMonitorTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysBattMonitorEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of the Battery Monitor Board."
- ::= { upsDiagnosticSubsystem 6 }
-
-upsDiagSubSysBattMonitorEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysBattMonitorEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of the Battery Monitor Board."
- INDEX { upsDiagSubSysBattMonitorIndex}
- ::= { upsDiagSubSysBattMonitorTable 1 }
-
-UpsDiagSubSysBattMonitorEntry ::=
- SEQUENCE {
- upsDiagSubSysBattMonitorFrameIndex INTEGER,
- upsDiagSubSysBattMonitorIndex INTEGER,
- upsDiagSubSysBattMonitorStatus INTEGER,
- upsDiagSubSysBattMonitorFirmwareRev DisplayString,
- upsDiagSubSysBattMonitorHardwareRev DisplayString,
- upsDiagSubSysBattMonitorSerialNum DisplayString,
- upsDiagSubSysBattMonitorManufactureDate DisplayString
- }
-
-upsDiagSubSysBattMonitorFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysBattMonitorEntry 1 }
-
-upsDiagSubSysBattMonitorIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the Battery Monitor Board."
- ::= { upsDiagSubSysBattMonitorEntry 2 }
-
-upsDiagSubSysBattMonitorStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Battery Monitor Board.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysBattMonitorEntry 3 }
-
-upsDiagSubSysBattMonitorFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the Battery Monitor Board."
- ::= { upsDiagSubSysBattMonitorEntry 4 }
-
-upsDiagSubSysBattMonitorHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the Battery Monitor Board."
- ::= { upsDiagSubSysBattMonitorEntry 5 }
-
-upsDiagSubSysBattMonitorSerialNum OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the Battery Monitor Board."
- ::= { upsDiagSubSysBattMonitorEntry 6 }
-
-upsDiagSubSysBattMonitorManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date of the manufacture for the Battery Monitor Board."
- ::= { upsDiagSubSysBattMonitorEntry 7 }
-
-upsDiagSubSysExternalSwitchGearTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of External Switch Gears attached to the UPS."
- ::= { upsDiagnosticSubsystem 7 }
-
-upsDiagSubSysExternalSwitchGearTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysExternalSwitchGearEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of the individual External Switch Gear."
- ::= { upsDiagnosticSubsystem 8 }
-
-upsDiagSubSysExternalSwitchGearEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysExternalSwitchGearEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of an individual External Switch Gear."
- INDEX { upsDiagSubSysExternalSwitchGearIndex}
- ::= { upsDiagSubSysExternalSwitchGearTable 1 }
-
-UpsDiagSubSysExternalSwitchGearEntry ::=
- SEQUENCE {
- upsDiagSubSysExternalSwitchGearFrameIndex INTEGER,
- upsDiagSubSysExternalSwitchGearIndex INTEGER,
- upsDiagSubSysExternalSwitchGearStatus INTEGER,
- upsDiagSubSysExternalSwitchGearFirmwareRev DisplayString,
- upsDiagSubSysExternalSwitchGearHardwareRev DisplayString,
- upsDiagSubSysExternalSwitchGearSerialNum DisplayString,
- upsDiagSubSysExternalSwitchGearManufactureDate DisplayString
- }
-
-upsDiagSubSysExternalSwitchGearFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysExternalSwitchGearEntry 1 }
-
-upsDiagSubSysExternalSwitchGearIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the External Switch Gear."
- ::= { upsDiagSubSysExternalSwitchGearEntry 2 }
-
-upsDiagSubSysExternalSwitchGearStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the External Switch Gear.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysExternalSwitchGearEntry 3 }
-
-upsDiagSubSysExternalSwitchGearFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the External Switch Gear monitor card."
- ::= { upsDiagSubSysExternalSwitchGearEntry 4 }
-
-upsDiagSubSysExternalSwitchGearHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the External Switch Gear monitor card."
- ::= { upsDiagSubSysExternalSwitchGearEntry 5 }
-
-upsDiagSubSysExternalSwitchGearSerialNum OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The serial number of the External Switch Gear monitor card."
- ::= { upsDiagSubSysExternalSwitchGearEntry 6 }
-
-upsDiagSubSysExternalSwitchGearManufactureDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date of the manufacture for the External Switch Gear monitor card."
- ::= { upsDiagSubSysExternalSwitchGearEntry 7 }
-
-upsDiagSubSysDisplayInterfaceCardTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Display Interface Cards attached to the UPS."
- ::= { upsDiagnosticSubsystem 9 }
-
-upsDiagSubSysDisplayInterfaceCardTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysDisplayInterfaceCardEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual Display Interface Cards."
- ::= { upsDiagnosticSubsystem 10 }
-
-upsDiagSubSysDisplayInterfaceCardEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysDisplayInterfaceCardEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of a Display Interface Card."
- INDEX { upsDiagSubSysDisplayInterfaceCardIndex}
- ::= { upsDiagSubSysDisplayInterfaceCardTable 1 }
-
-UpsDiagSubSysDisplayInterfaceCardEntry ::=
- SEQUENCE {
- upsDiagSubSysDisplayInterfaceCardFrameIndex INTEGER,
- upsDiagSubSysDisplayInterfaceCardIndex INTEGER,
- upsDiagSubSysDisplayInterfaceCardStatus INTEGER
- }
-
-upsDiagSubSysDisplayInterfaceCardFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysDisplayInterfaceCardEntry 1 }
-
-upsDiagSubSysDisplayInterfaceCardIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the Display Interface Card."
- ::= { upsDiagSubSysDisplayInterfaceCardEntry 2 }
-
-upsDiagSubSysDisplayInterfaceCardStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Display Interface Card.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysDisplayInterfaceCardEntry 3 }
-
-upsDiagSubSysDCCircuitBreakerTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC Circuit Breakers attached to the UPS."
- ::= { upsDiagnosticSubsystem 11 }
-
-upsDiagSubSysDCCircuitBreakerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysDCCircuitBreakerEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual DC Circuit Breakers."
- ::= { upsDiagnosticSubsystem 12 }
-
-upsDiagSubSysDCCircuitBreakerEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysDCCircuitBreakerEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of a DC Circuit Breaker."
- INDEX { upsDiagSubSysDCCircuitBreakerIndex}
- ::= { upsDiagSubSysDCCircuitBreakerTable 1 }
-
-UpsDiagSubSysDCCircuitBreakerEntry ::=
- SEQUENCE {
- upsDiagSubSysDCCircuitBreakerFrameIndex INTEGER,
- upsDiagSubSysDCCircuitBreakerIndex INTEGER,
- upsDiagSubSysDCCircuitBreakerStatus INTEGER
- }
-
-upsDiagSubSysDCCircuitBreakerFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysDCCircuitBreakerEntry 1 }
-
-upsDiagSubSysDCCircuitBreakerIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the DC Circuit Breaker."
- ::= { upsDiagSubSysDCCircuitBreakerEntry 2 }
-
-upsDiagSubSysDCCircuitBreakerStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- opened (3),
- closed (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the DC Circuit Breaker.
- unknown(1) indicates the circuit breaker status is unknown.
- notInstalled(2) indicates the circuit breaker is not installed.
- opened(3) indicates the circuit breaker is opened.
- closed(4) indicates the circuit breaker is closed."
- ::= { upsDiagSubSysDCCircuitBreakerEntry 3 }
-
-upsDiagSubSysSystemPowerSupplyTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of System Power Supplies attached to the UPS."
- ::= { upsDiagnosticSubsystem 13 }
-
-upsDiagSubSysSystemPowerSupplyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysSystemPowerSupplyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual System Power Supplies."
- ::= { upsDiagnosticSubsystem 14 }
-
-upsDiagSubSysSystemPowerSupplyEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysSystemPowerSupplyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of a System Power Supply."
- INDEX { upsDiagSubSysSystemPowerSupplyIndex}
- ::= { upsDiagSubSysSystemPowerSupplyTable 1 }
-
-UpsDiagSubSysSystemPowerSupplyEntry ::=
- SEQUENCE {
- upsDiagSubSysSystemPowerSupplyFrameIndex INTEGER,
- upsDiagSubSysSystemPowerSupplyIndex INTEGER,
- upsDiagSubSysSystemPowerSupplyStatus INTEGER
- }
-
-upsDiagSubSysSystemPowerSupplyFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysSystemPowerSupplyEntry 1 }
-
-upsDiagSubSysSystemPowerSupplyIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of a System Power Supply."
- ::= { upsDiagSubSysSystemPowerSupplyEntry 2 }
-
-upsDiagSubSysSystemPowerSupplyStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the System Power Supply.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysSystemPowerSupplyEntry 3 }
-
-upsDiagSubSysXRCommunicationCardTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of XR Communication Cards attached to the UPS."
- ::= { upsDiagnosticSubsystem 15 }
-
-upsDiagSubSysXRCommunicationCardTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysXRCommunicationCardEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual XR Communication Cards."
- ::= { upsDiagnosticSubsystem 16 }
-
-upsDiagSubSysXRCommunicationCardEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysXRCommunicationCardEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of an XR Communication Card."
- INDEX { upsDiagSubSysXRCommunicationCardIndex}
- ::= { upsDiagSubSysXRCommunicationCardTable 1 }
-
-UpsDiagSubSysXRCommunicationCardEntry ::=
- SEQUENCE {
- upsDiagSubSysXRCommunicationCardFrameIndex INTEGER,
- upsDiagSubSysXRCommunicationCardIndex INTEGER,
- upsDiagSubSysXRCommunicationCardStatus INTEGER
- }
-
-upsDiagSubSysXRCommunicationCardFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysXRCommunicationCardEntry 1 }
-
-upsDiagSubSysXRCommunicationCardIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of an XR Communication Card."
- ::= { upsDiagSubSysXRCommunicationCardEntry 2 }
-
-upsDiagSubSysXRCommunicationCardStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the XR Communication Card.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysXRCommunicationCardEntry 3 }
-
-upsDiagSubSysExternalPowerFrameBoardTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of External Power Frame Boards attached to the UPS."
- ::= { upsDiagnosticSubsystem 17 }
-
-upsDiagSubSysExternalPowerFrameBoardTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysExternalPowerFrameBoardEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual External Power Frame Boards."
- ::= { upsDiagnosticSubsystem 18 }
-
-upsDiagSubSysExternalPowerFrameBoardEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysExternalPowerFrameBoardEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of an External Power Frame Board."
- INDEX { upsDiagSubSysExternalPowerFrameBoardIndex}
- ::= { upsDiagSubSysExternalPowerFrameBoardTable 1 }
-
-UpsDiagSubSysExternalPowerFrameBoardEntry ::=
- SEQUENCE {
- upsDiagSubSysExternalPowerFrameBoardFrameIndex INTEGER,
- upsDiagSubSysExternalPowerFrameBoardIndex INTEGER,
- upsDiagSubSysExternalPowerFrameBoardStatus INTEGER
- }
-
-upsDiagSubSysExternalPowerFrameBoardFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysExternalPowerFrameBoardEntry 1 }
-
-upsDiagSubSysExternalPowerFrameBoardIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of an External Power Frame Board."
- ::= { upsDiagSubSysExternalPowerFrameBoardEntry 2 }
-
-upsDiagSubSysExternalPowerFrameBoardStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the External Power Frame Board.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysExternalPowerFrameBoardEntry 3 }
-
-upsDiagSubSysChargerTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of Chargers attached to the UPS."
- ::= { upsDiagnosticSubsystem 19 }
-
- upsDiagSubSysChargerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF UpsDiagSubSysChargerEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for diagnostics of individual chargers."
- ::= { upsDiagnosticSubsystem 20 }
-
-upsDiagSubSysChargerEntry OBJECT-TYPE
- SYNTAX UpsDiagSubSysChargerEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The diagnostics of a charger."
- INDEX { upsDiagSubSysChargerIndex}
- ::= { upsDiagSubSysChargerTable 1 }
-
-UpsDiagSubSysChargerEntry ::=
- SEQUENCE {
- upsDiagSubSysChargerFrameIndex INTEGER,
- upsDiagSubSysChargerIndex INTEGER,
- upsDiagSubSysChargerStatus INTEGER
- }
-
-upsDiagSubSysChargerFrameIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The frame index entry."
- ::= { upsDiagSubSysChargerEntry 1 }
-
-upsDiagSubSysChargerIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of a charger."
- ::= { upsDiagSubSysChargerEntry 2 }
-
-upsDiagSubSysChargerStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- offOk (3),
- onOk (4),
- offFail (5),
- onFail (6),
- lostComm (7)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Charger.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- offOk(3) indicates the device status is off and OK.
- onOk(4) indicates the device status is on and OK.
- offFail(5) indicates the device status is off and failed.
- onFail(6) indicates the device status is on and failed.
- lostComm(7) indicates the device has lost communication."
- ::= { upsDiagSubSysChargerEntry 3 }
-
--- the upsDiagnosticExternalDevices group
-
-upsDiagSwitchGearStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- fail (4),
- lostComm (5),
- overtemp (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Switch Gear.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- fail(4) indicates the device status has failed.
- lostComm(5) indicates the device has lost communication.
- overtemp(6) indicates the device has an over temperature condition."
- ::= { upsDiagSwitchGear 1 }
-
-upsDiagSwitchGearInputSwitchStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- opened (3),
- closed (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Switch Gear Input Switch.
- unknown(1) indicates the switch status is unknown.
- notInstalled(2) indicates the switch is not installed.
- opened(3) indicates the switch is opened.
- closed(4) indicates the switch is closed."
- ::= { upsDiagSwitchGear 2 }
-
-upsDiagSwitchGearOutputSwitchStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- opened (3),
- closed (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Switch Gear Output Switch.
- unknown(1) indicates the switch status is unknown.
- notInstalled(2) indicates the switch is not installed.
- opened(3) indicates the switch is opened.
- closed(4) indicates the switch is closed."
- ::= { upsDiagSwitchGear 3 }
-
-upsDiagSwitchGearBypassSwitchStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- opened (3),
- closed (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Switch Gear Bypass Switch.
- unknown(1) indicates the switch status is unknown.
- notInstalled(2) indicates the switch is not installed.
- opened(3) indicates the switch is opened.
- closed(4) indicates the switch is closed."
- ::= { upsDiagSwitchGear 4 }
-
-upsDiagMCCBBoxStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- opened (3),
- closed (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the MCCB Box (Molded Case Circuit Breaker Box) external device.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- opened(3) indicates the circuit is opened.
- closed(4) indicates the circuit is closed."
- ::= { upsDiagMCCBBox 1 }
-
-upsDiagTransformerStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- fail (4),
- lostComm (5),
- overtemp (6),
- opened (7),
- closed (8)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the External Transformer.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- fail(4) indicates the device status has failed.
- lostComm(5) indicates the device has lost communication.
- overtemp(6) indicates the device has an over temperature condition.
- opened(7) indicates the circuit is opened.
- closed(8) indicates the circuit is closed."
- ::= { upsDiagTransformer 1 }
-
--- the upsDiagnosticComBus group
-
-upsDiagComBusInternalMIMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- lostComm (4),
- rxFailure (5),
- txFailure (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the internal MIM communication bus.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- lostComm(4) indicates the device has lost communication.
- rxFailure(5) indicates the device has a receive failure.
- txFailure(6) indicates the device has a transmit failure."
- ::= { upsDiagnosticComBus 1 }
-
-upsDiagComBusInternalRIMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- lostComm (4),
- rxFailure (5),
- txFailure (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the internal RIM communication bus.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- lostComm(4) indicates the device has lost communication.
- rxFailure(5) indicates the device has a receive failure.
- txFailure(6) indicates the device has a transmit failure."
- ::= { upsDiagnosticComBus 2 }
-
-upsDiagComBusMIMtoRIMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- lostComm (4),
- rxFailure (5),
- txFailure (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the MIM to RIM communication bus.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- lostComm(4) indicates the device has lost communication.
- rxFailure(5) indicates the device has a receive failure.
- txFailure(6) indicates the device has a transmit failure."
- ::= { upsDiagnosticComBus 3 }
-
-upsDiagComBusExternalMIMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- lostComm (4),
- rxFailure (5),
- txFailure (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the external MIM communication bus.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- lostComm(4) indicates the device has lost communication.
- rxFailure(5) indicates the device has a receive failure.
- txFailure(6) indicates the device has a transmit failure."
- ::= { upsDiagnosticComBus 4 }
-
-upsDiagComBusExternalRIMStatus OBJECT-TYPE
- SYNTAX INTEGER {
- unknown (1),
- notInstalled (2),
- ok (3),
- lostComm (4),
- rxFailure (5),
- txFailure (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the external RIM communication bus.
- unknown(1) indicates the device status is unknown.
- notInstalled(2) indicates the device is not installed.
- ok(3) indicates the device status is OK.
- lostComm(4) indicates the device has lost communication.
- rxFailure(5) indicates the device has a receive failure.
- txFailure(6) indicates the device has a transmit failure."
- ::= { upsDiagnosticComBus 5 }
-
--- the serialPort2Config group
-
-serialPort2Mode OBJECT-TYPE
- SYNTAX INTEGER {
- localConsole(1),
- passthrough(2)
- }
- ACCESS read-write
- STATUS obsolete
- DESCRIPTION
- "Setting this variable to passthrough will enable mini's port2
- behave like a UPS port. Choosing localConsole will enable the port
- to be used as local console."
- ::= { serialPort2Config 1 }
--- the serialPort2Control group
-
-setPulseOnTXD OBJECT-TYPE
- SYNTAX INTEGER {
- noSetPulseOnTXD(1),
- setPulseOnTXD(2),
- setTXDLow(3),
- setTXDHigh(4)
-
- }
- ACCESS read-write
- STATUS obsolete
- DESCRIPTION
- "Setting this variable to setPulseOnTXD(2)
- causes adapter to generate a PULSE on TXD pin of serial port 2.
- The duration in the prototype implementation will be 1 second.
-
- Setting this value to noSetPulseOnTXD(1) has no
- effect.
-
- The value noSetPulseOnTXD(1) will always be returned
- when the variable is read.
-
- Setting this value to setTXDLow(3), or setTXDHigh(4) will keep TXD
- always low or high respectively."
- ::= { serialPort2Control 1 }
-
--- the sPDUIdent group
-
-sPDUIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the PDU. This value
- is set at the factory."
- ::= { sPDUIdent 1 }
-
-sPDUIdentFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An 8 byte ID string identifying the PDU firmware revision.
- This value is set at the factory."
- ::= { sPDUIdent 2 }
-
-
-sPDUIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the PDU was manufactured in mm/dd/yy format.
- This value is set at the factory. The year 2000 will be
- represented by 00."
- ::= { sPDUIdent 3 }
-
-sPDUIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 10-character string identifying the model number of
- the PDU internal. This value is set at the factory."
- ::= { sPDUIdent 4 }
-
-sPDUIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 12-character string identifying the serial number of
- the PDU internal microprocessor. This value is set at
- the factory."
- ::= { sPDUIdent 5 }
-
-
--- the sPDUMasterControl group
-
-sPDUMasterControlSwitch OBJECT-TYPE
- SYNTAX INTEGER {
- turnAllOnNow (1),
- turnAllOnSequence (2),
- turnAllOffNow (3),
- rebootAllNow (4),
- rebootAllSequence (5),
- noCommand (6),
- turnAllOffSequence (7)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to turnAllOnNow (1) will turn all outlets
- on immediately.
-
- Setting this OID to turnAllOnSequence (2) will turn all outlets
- on as defined by each outlet's sPDUOutletPowerOnTime OID value.
-
- Setting this OID to turnAllOff (3) will turn all outlets
- off immediately.
-
- Setting this OID to rebootAllNow (4) will reboot all outlets
- immediately.
-
- For MasterSwitch firmware version 1.X, setting this OID to
- rebootAllSequence (5) reboots all outlets, with power returned
- to the outlets in the sequence defined by each outlet's
- sPDUOutletPowerOnTime OID value.
-
- For MasterSwitch firmware version 2.X, setting this OID to
- rebootAllSequence (5) will cause a turnAllOffSequence to be performed.
- Once all outlets are off, the MasterSwitch will then delay the
- sPDUMasterConfigReboot OID time, and then perform a turnAllOnSequence.
-
- For MasterSwitch firmware version 2.X, setting this OID to
- turnAllOffSequence (7) will turn all outlets off as defined by
- each outlet's sPDUOutletPowerOffTime OID value.
-
- For MasterSwitch firmware version 1.X, setting this OID to
- turnAllOffSequence (7) will have no effect.
-
- Getting this OID will return the noCommand (6) value."
-
- ::= { sPDUMasterControl 1 }
-
-
-sPDUMasterState OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will cause the status of all outlets to be
- returned. This OID is provided for informational purposes only.
- To change the outlet state, the user should use the sPDUOutletCtl
- OID in the sPDUOutletControlTable.
-
- The format of the data returned is a character string consisting
- of the word 'On' if the outlet is on or 'Off' if the outlet is
- off. At least one space will delimit each outlet entry in the
- string.
-
- If the outlet states are unknown, the character string 'Unknown'
- will be returned. This signifies that there is an inconsistancy
- in the PDU. In the rare case that this should happen, the user
- is advised to shut down all equipment powered by the PDU and
- then cycle the PDU's power. This will put the PDU in a consistent
- state."
-
- ::= { sPDUMasterControl 2 }
-
-sPDUMasterPending OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will cause the command pending status of all outlets to be returned.
-
- The format of the data returned is a character string consisting
- of the word 'Yes' if a command is pending for the outlet or 'No'
- if there is no command pending for the outlet. At least one
- space will delimit each outlet entry in the string.
-
- If the pending states are unknown, the character string 'Unknown'
- will be returned. This signifies that there is an inconsistancy
- in the PDU. In the rare case that this should happen, the user
- is advised to shut down all equipment powered by the PDU and then
- cycle the PDU's power. This will put the PDU in a consistent state."
- ::= { sPDUMasterControl 3 }
-
-
--- the sPDUMasterConfig group
-
-sPDUMasterConfigPowerOn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in seconds, between when
- power is provided to the PDU and when the PDU
- provides basic master power to the outlets.
-
- Allowed values are:
-
- -1 never apply power automatically.
- 0 apply power immediately.
- 15 apply power in 15 seconds.
- 30 apply power in 30 seconds.
- 45 apply power in 45 seconds.
- 60 apply power in 60 seconds (1 minute).
- 120 apply power in 120 seconds (2 minutes).
- 300 apply power in 300 seconds (5 minutes).
-
- If a value other than a supported value is provided in a
- set request, the PDU interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
-
- ::= { sPDUMasterConfig 1 }
-
-sPDUMasterConfigReboot OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "During a reboot sequence, power is turned off and then
- back on. This OID defines the amount of time to wait,
- in seconds, after turning the power off, at the start
- of the sequence, before turning power back on, at the
- end of the reboot sequence.
-
- Allowed values are:
-
- 5 wait 5 seconds between off/on.
- 10 wait 10 seconds between off/on.
- 15 wait 15 seconds between off/on.
- 20 wait 20 seconds between off/on.
- 30 wait 30 seconds between off/on.
- 45 wait 45 seconds between off/on.
- 60 wait 60 seconds (1 minute) between off/on.
-
- If a value other than a supported value is provided in a
- set request, the PDU interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used.
-
- This OID is read-only for the MasterSwitch version 2.X and is the
- maximum sPDUOutletRebootDuration OID of the individual outlets."
-
- ::= { sPDUMasterConfig 2 }
-
-sPDUMasterConfigPDUName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the PDU. The maximum value is 20 characters."
- ::= { sPDUMasterConfig 3 }
-
-
-
--- the sPDUOutletControl group
-sPDUOutletControlTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of outlets for the PDU."
- ::= { sPDUOutletControl 1 }
-
-
-sPDUOutletControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual outlet switches. The number of
- entries is contained in the sPDUOutletControlTableSize OID."
- ::= { sPDUOutletControl 2 }
-
-sPDUOutletControlEntry OBJECT-TYPE
- SYNTAX OutletControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to control."
- INDEX { sPDUOutletControlIndex}
- ::= { sPDUOutletControlTable 1 }
-
-OutletControlEntry ::=
- SEQUENCE {
- sPDUOutletControlIndex INTEGER,
- sPDUOutletPending INTEGER,
- sPDUOutletCtl INTEGER,
- sPDUOutletCtlName DisplayString
- }
-
-sPDUOutletControlIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletControlEntry 1 }
-
-sPDUOutletPending OBJECT-TYPE
- SYNTAX INTEGER{
- commandPending (1),
- noCommandPending (2),
- commandPendingUnknown (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Reports whether the current outlet has a pending command.
-
- If the commandPendingUnknown (3) value is returned, all
- devices powered by the PDU should be shut down. The PDU's
- power should then be cycled to clear this condition."
-
- ::= { sPDUOutletControlEntry 2 }
-
-sPDUOutletCtl OBJECT-TYPE
- SYNTAX INTEGER {
- outletOn (1),
- outletOff (2),
- outletReboot (3),
- outletUnknown (4),
- outletOnWithDelay (5),
- outletOffWithDelay (6),
- outletRebootWithDelay (7)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the outletOn (1) value will be returned.
- If the outlet is off, the outletOff (2) value will be
- returned.
-
- If the state of the outlet cannot be determined, the
- outletUnknown (4) value will be returned. If the
- outletUnknown condition should occur, all devices
- powered by the PDU should be shut down. The PDU's power
- should then be cycled to clear this condition.
-
- Setting this variable to outletOn (1) will turn the outlet on.
-
- Setting this variable to outletOff (2) will turn the outlet off.
-
- Setting this variable to outletReboot (3) will reboot the outlet.
-
- Setting this variable to outletOnWithDelay (5) will turn the outlet on
- after the sPDUOutletPowerOnTime OID has elapsed. This option is not
- valid for MasterSwitch firmware version 1.X.
-
- Setting this variable to outletOffWithDelay (6) will turn the outlet off
- after the sPDUOutletPowerOffTime OID has elapsed. This option is not valid
- for MasterSwitch firmware version 1.X.
-
- Setting this variable to outletRebootWithDelay (7) will turn the outlet off
- after the sPDUOutletPowerOffTime OID has elapsed, wait the sPDUOutletRebootDuration
- OID time, then turn the outlet back on.
- This option is not valid for MasterSwitch firmware version 1.X."
-
- ::= { sPDUOutletControlEntry 3 }
-
-sPDUOutletCtlName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is 20 characters.
- This OID is provided for informational purposes only.
- This value is set by the sPDUOutletName OID."
-
- ::= { sPDUOutletControlEntry 4 }
-
--- the sPDUOutletConfig group
-sPDUOutletConfigTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of outlets for the PDU."
- ::= { sPDUOutletConfig 1 }
-
-sPDUOutletConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF SPDUOutletConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The list of outlets to configure. The number of
- entries is defined by the sPDUOutletConfigTableSize
- OID."
-
- ::= { sPDUOutletConfig 2 }
-
-sPDUOutletConfigEntry OBJECT-TYPE
- SYNTAX SPDUOutletConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to control."
- INDEX { sPDUOutletConfigIndex}
- ::= { sPDUOutletConfigTable 1 }
-
-SPDUOutletConfigEntry ::=
- SEQUENCE {
- sPDUOutletConfigIndex INTEGER,
- sPDUOutletPowerOnTime INTEGER,
- sPDUOutletName DisplayString,
- sPDUOutletPowerOffTime INTEGER,
- sPDUOutletRebootDuration INTEGER
- }
-
-sPDUOutletConfigIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletConfigEntry 1 }
-
-sPDUOutletPowerOnTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet will delay
- powering on when the MasterSwitch is powered on.
-
- Allowed values are:
-
- -1 never power on automatically.
- 0 power on with the Master Switch.
- 15 power on 15 seconds after the MasterSwitch has power applied.
- 30 power on 30 seconds after the MasterSwitch has power applied.
- 45 power on 45 seconds after the MasterSwitch has power applied.
- 60 power on 60 seconds (1 minute) after the MasterSwitch has power applied.
- 120 power on 120 seconds (2 minutes) after the MasterSwitch has power applied.
- 300 power on 300 seconds (5 minutes) after the MasterSwitch has power applied.
-
- If a value other than a supported value is provided in a
- set request, the PDU interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
-
- ::= { sPDUOutletConfigEntry 2 }
-
-sPDUOutletName OBJECT-TYPE
- SYNTAX DisplayString ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is 20 characters."
-
- ::= { sPDUOutletConfigEntry 3 }
-
-sPDUOutletPowerOffTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet will delay
- powering off.
-
- Allowed values are:
-
- -1 never power off automatically.
- 0 power off with the MasterSwitch.
- 15 power off 15 seconds after being commanded.
- 30 power off 30 seconds after being commanded.
- 45 power off 45 seconds after being commanded.
- 60 power off 60 seconds (1 minute) after being commanded.
- 120 power off 120 seconds (2 minutes) after being commanded.
- 300 power off 300 seconds (5 minutes) after being commanded.
-
- If a value other than a supported value is provided in a
- set request, the PDU interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used.
-
- This OID is not available for MasterSwitch firmware version 1.X."
-
- ::= { sPDUOutletConfigEntry 4 }
-
-sPDUOutletRebootDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "During a reboot sequence, power is turned off and then
- back on. This OID defines the amount of time to wait,
- in seconds, after turning the power off, at the start
- of the sequence, before turning power back on, at the
- end of the reboot sequence.
-
- Allowed values are:
-
- 5 wait 5 seconds between off/on.
- 10 wait 10 seconds between off/on.
- 15 wait 15 seconds between off/on.
- 20 wait 20 seconds between off/on.
- 30 wait 30 seconds between off/on.
- 45 wait 45 seconds between off/on.
- 60 wait 60 seconds (1 minute) between off/on.
-
- If a value other than a supported value is provided in a
- set request, the PDU interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used.
-
- This OID is not available for MasterSwitch firmware version 1.X."
-
- ::= { sPDUOutletConfigEntry 5 }
-
-
--- the sPDUIdentVM group
-
-sPDUIdentVMTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch VMs controllable
- by this IP address."
- ::= { sPDUIdentVM 1 }
-
-
-sPDUIdentVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IdentVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for query of the individual MasterSwitch VMs.
- The number of entries is contained in the
- sPDUIdentVMTableSize OID."
- ::= { sPDUIdentVM 2 }
-
-sPDUIdentVMEntry OBJECT-TYPE
- SYNTAX IdentVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch VMs to query."
- INDEX { sPDUIdentVMIndex}
- ::= { sPDUIdentVMTable 1 }
-
-IdentVMEntry ::=
- SEQUENCE {
- sPDUIdentVMIndex INTEGER,
- sPDUIdentNameVM DisplayString,
- sPDUIdentHardwareRevVM DisplayString,
- sPDUIdentFirmwareRevVM DisplayString,
- sPDUIdentDateOfManufactureVM DisplayString,
- sPDUIdentModelNumberVM DisplayString,
- sPDUIdentSerialNumberVM DisplayString
- }
-
-sPDUIdentVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM entry."
- ::= { sPDUIdentVMEntry 1 }
-
-sPDUIdentNameVM OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 23-character string identifying the
- MasterSwitch VM. "
- ::= { sPDUIdentVMEntry 2 }
-
-sPDUIdentHardwareRevVM OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware version of the MasterSwitch VM.
- This value is set at the factory."
- ::= { sPDUIdentVMEntry 3 }
-
-sPDUIdentFirmwareRevVM OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An 6-character ID string identifying the MasterSwitch VM
- firmware version. This value is set at the factory."
- ::= { sPDUIdentVMEntry 4 }
-
-
-sPDUIdentDateOfManufactureVM OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the MasterSwitch VM was manufactured in mm/dd/yyyy format.
- This value is set at the factory. "
- ::= { sPDUIdentVMEntry 5 }
-
-sPDUIdentModelNumberVM OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 17-character string identifying the model number of
- the MasterSwitch VM. This value is set at the factory."
- ::= { sPDUIdentVMEntry 6 }
-
-sPDUIdentSerialNumberVM OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 17-character string identifying the serial number of
- the MasterSwitch VM. This value is set at the factory."
- ::= { sPDUIdentVMEntry 7 }
-
-
--- the sPDUMasterControlVM group
-
-sPDUMasterControlVMTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch VMs controllable
- by this IP address."
- ::= { sPDUMasterControlVM 1 }
-
-
-sPDUMasterControlVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MasterControlVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of the individual MasterSwitch VMs.
- The number of entries is contained in the
- sPDUMasterControlVMTableSize OID."
- ::= { sPDUMasterControlVM 2 }
-
-sPDUMasterControlVMEntry OBJECT-TYPE
- SYNTAX MasterControlVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch VMs to control."
- INDEX { sPDUMasterControlVMIndex}
- ::= { sPDUMasterControlVMTable 1 }
-
-MasterControlVMEntry ::=
- SEQUENCE {
- sPDUMasterControlVMIndex INTEGER,
- sPDUMasterControlVMName DisplayString,
- sPDUMasterControlVMCommand INTEGER
- }
-
-sPDUMasterControlVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM entry."
- ::= { sPDUMasterControlVMEntry 1 }
-
-sPDUMasterControlVMName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch VM. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigVMName OID."
- ::= { sPDUMasterControlVMEntry 2 }
-
-sPDUMasterControlVMCommand OBJECT-TYPE
- SYNTAX INTEGER {
- noCommandAllVM (1),
- immediateAllOnVM (2),
- immediateAllOffVM (3),
- immediateAllRebootVM (4),
- delayedAllOnVM (5),
- delayedAllOffVM (6),
- sequencedAllRebootVM (7),
- delayedAllRebootVM (8),
- delayedSequenceAllRebootVM (9),
- cancelAllPendingCommandsVM (10),
- audioAlarmMute (11)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to immediateAllOnVM (2) will turn all outlets
- on immediately.
-
- Setting this OID to immediateAllOffVM (3) will turn all outlets
- off immediately.
-
- Setting this OID to immediateAllRebootVM (4) will reboot all outlets
- immediately.
-
- Setting this OID to delayedAllOnVM (5) will turn all outlets on as
- defined by each outlet's sPDUOutletConfigVMPowerOnTime OID value.
-
- Setting this OID to delayedAllOffVM (6) will turn all outlets
- off as defined by each outlet's sPDUOutletConfigVMPowerOffTime OID value.
-
- Setting this OID to sequencedAllRebootVM (7) will cause a
- immediateAllOffVM command to be performed. The MasterSwitch VM will
- then delay the sPDUMasterStatusVMRebootDuration OID time, and then
- perform a delayedAllOnVM command.
-
- Setting this OID to delayedAllRebootVM (8) will cause a delayedAllOffVM
- command to be performed. Each outlet will then wait its
- sPDUOutletConfigVMRebootDuration before returning power to the outlet.
-
- Setting this OID to delayedSequenceAllRebootVM (9) will cause a
- delayedAllOffVM command to be performed. Once all outlets are off,
- the MasterSwitch VM will then delay the sPDUMasterStatusVMRebootDuration
- OID time, and then perform a delayedAllOnVM command.
-
- Setting this OID to cancelAllPendingCommandsVM (10) will cause all pending
- commands on the MasterSwitch VM to be canceled.
-
-
- Setting this OID to audioAlarmMute (11) will temporarily silence the audible
- alarm for the duration of the current overload condition. The audible alarm
- will be activated on subsequent overload alarms.
-
- Getting this OID will return the noCommandAllVM (1) value."
- ::= { sPDUMasterControlVMEntry 3 }
-
-
--- the sPDUMasterConfigVM group
-
-sPDUMasterConfigVMTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch VMs configurable
- by this IP address."
- ::= { sPDUMasterConfigVM 1 }
-
-
-sPDUMasterConfigVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MasterConfigVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of the individual MasterSwitch VMs.
- The number of entries is contained in the
- sPDUMasterConfigVMTableSize OID."
- ::= { sPDUMasterConfigVM 2 }
-
-sPDUMasterConfigVMEntry OBJECT-TYPE
- SYNTAX MasterConfigVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch VMs to configure."
- INDEX { sPDUMasterConfigVMIndex}
- ::= { sPDUMasterConfigVMTable 1 }
-
-MasterConfigVMEntry ::=
- SEQUENCE {
- sPDUMasterConfigVMIndex INTEGER,
- sPDUMasterConfigVMName DisplayString,
- sPDUMasterConfigVMColdstartDelay INTEGER,
- sPDUMasterConfigVMAudioAlarmActivated INTEGER,
- sPDUMasterConfigVMHighLoadWarningThreshold INTEGER,
- sPDUMasterConfigVMLowLoadWarningThreshold INTEGER,
- sPDUMasterConfigVMOverloadRestriction INTEGER
- }
-
-sPDUMasterConfigVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM entry."
- ::= { sPDUMasterConfigVMEntry 1 }
-
-
-sPDUMasterConfigVMName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch VM. Maximum size is 23 characters."
- ::= { sPDUMasterConfigVMEntry 2 }
-
-sPDUMasterConfigVMColdstartDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in seconds, between when
- power is provided to the MasterSwitch VM and
- when the MasterSwitch VM provides basic master
- power to the outlets.
-
- Allowed values are:
-
- -1 never apply power automatically.
- 0 apply power immediately.
- 15 apply power in 15 seconds.
- 30 apply power in 30 seconds.
- 45 apply power in 45 seconds.
- 60 apply power in 60 seconds (1 minute).
- 120 apply power in 120 seconds (2 minutes).
- 300 apply power in 300 seconds (5 minutes).
-
- If a value other than a supported value is provided in a
- set request, the MasterSwitch VM interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { sPDUMasterConfigVMEntry 3 }
-
-sPDUMasterConfigVMAudioAlarmActivated OBJECT-TYPE
- SYNTAX INTEGER {
- audioAlarmActiveNever (1),
- audioAlarmActiveOnOverload (2),
- audioAlarmActiveOnOverloadImminent (3)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to audioAlarmActiveNever (1) will disable
- the audio alarm on the MasterSwitch VM.
-
- Setting this OID to audioAlarmActiveOnOverload (2) will
- activate the audio alarm on the MasterSwitch VM when an
- overload condition is present.
-
- Setting this OID to audioAlarmActiveOnOverloadImminent (3)
- will activate the audio alarm on the MasterSwitch VM when
- the load on the MasterSwitch VM has surpassed the
- sPDUMasterConfigVMHighLoadWarningThreshold OID value."
- ::= { sPDUMasterConfigVMEntry 4 }
-
-sPDUMasterConfigVMHighLoadWarningThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load is nearing an overload condition. It is
- represented as a percentage of full load."
- ::= { sPDUMasterConfigVMEntry 5 }
-
-sPDUMasterConfigVMLowLoadWarningThreshold OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load is nearing a low consumption condition. It is
- represented as a percentage of full load."
- ::= { sPDUMasterConfigVMEntry 6 }
-
-sPDUMasterConfigVMOverloadRestriction OBJECT-TYPE
- SYNTAX INTEGER {
- alwaysAllowTurnON (1),
- restrictOnWarning (2),
- restrictOnOverload (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID controls the behavior of the MasterSwitch VM
- when an overload condition is possible and additional
- outlets are requested to be turned on.
-
- Setting this OID to alwaysAllowTurnON (1) will always allow
- the outlets to turn on.
-
- Setting this OID to restrictOnWarning (2) will not allow
- outlets to turn on if the sPDUMasterConfigVMHighLoadWarningThreshold
- OID is exceeded.
-
- Setting this OID to restrictOnOverload (3) will not allow
- outlets to turn on if the MasterSwitch Vm is in an
- overload condition."
- ::= { sPDUMasterConfigVMEntry 7 }
-
--- the sPDUMasterStatusVM group
-
-sPDUMasterStatusVMTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch VMs at
- this IP address."
- ::= { sPDUMasterStatusVM 1 }
-
-
-sPDUMasterStatusVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MasterStatusVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for gathering of status from the individual
- MasterSwitch VMs. The number of entries is contained
- in the sPDUMasterStatusVMTableSize OID."
- ::= { sPDUMasterStatusVM 2 }
-
-sPDUMasterStatusVMEntry OBJECT-TYPE
- SYNTAX MasterStatusVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch VMs to gather status from."
- INDEX { sPDUMasterStatusVMIndex}
- ::= { sPDUMasterStatusVMTable 1 }
-
-MasterStatusVMEntry ::=
- SEQUENCE {
- sPDUMasterStatusVMIndex INTEGER,
- sPDUMasterStatusVMName DisplayString,
- sPDUMasterStatusVMCommandPending INTEGER,
- sPDUMasterStatusVMOverloadCondition INTEGER,
- sPDUMasterStatusVMLowLoadCondition INTEGER,
- sPDUMasterStatusVMCurrentLoad INTEGER,
- sPDUMasterStatusVMMaxLoad INTEGER,
- sPDUMasterStatusVMOutletCount INTEGER,
- sPDUMasterStatusVMRebootDuration INTEGER
- }
-
-sPDUMasterStatusVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM entry."
- ::= { sPDUMasterStatusVMEntry 1 }
-
-sPDUMasterStatusVMName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch VM. Maximum size is 23 characters."
- ::= { sPDUMasterStatusVMEntry 2 }
-
-sPDUMasterStatusVMCommandPending OBJECT-TYPE
- SYNTAX INTEGER {
- commandPendingMasterTrueVM (1),
- commandPendingMasterFalseVM (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return commandPendingMasterTrueVM (1)
- if the MasterSwitch VM has a pending command on any of its
- outlets.
-
- commandPendingMasterFalseVM (2) will be returned if there are
- no pending commands."
- ::= { sPDUMasterStatusVMEntry 3 }
-
-sPDUMasterStatusVMOverloadCondition OBJECT-TYPE
- SYNTAX INTEGER {
- overloadConditionTrueVM (1),
- overloadConditionFalseVM (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return overloadConditionTrueVM (1)
- if the sPDUMasterConfigVMHighLoadWarningThreshold OID is
- violated.
-
- overloadConditionFalseVM (2) will be returned if the
- sPDUMasterConfigVMHighLoadWarningThreshold OID is not
- violated."
- ::= { sPDUMasterStatusVMEntry 4 }
-
-sPDUMasterStatusVMLowLoadCondition OBJECT-TYPE
- SYNTAX INTEGER {
- lowLoadConditionTrueVM (1),
- lowLoadConditionFalseVM (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return lowLoadConditionTrueVM (1)
- if the sPDUMasterConfigVMLowLoadWarningThreshold OID is
- violated.
-
- lowLoadConditionFalseVM (2) will be returned if the
- sPDUMasterConfigVMHighLoadWarningThreshold OID is not
- violated. "
- ::= { sPDUMasterStatusVMEntry 5 }
-
-sPDUMasterStatusVMCurrentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the total amount of power
- being consumed by the load. It is represented as a
- percentage of full load."
- ::= { sPDUMasterStatusVMEntry 6 }
-
-sPDUMasterStatusVMMaxLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the total amount of power
- that this MasterSwitch VM can provide. It is represented
- in Amps."
- ::= { sPDUMasterStatusVMEntry 7 }
-
-sPDUMasterStatusVMOutletCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the number of controllable
- outlets for this MasterSwitch VM."
- ::= { sPDUMasterStatusVMEntry 8 }
-
-sPDUMasterStatusVMRebootDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the largest
- sPDUOutletConfigVMRebootDuration OID time
- for this MasterSwitch VM."
- ::= { sPDUMasterStatusVMEntry 9 }
-
--- the sPDUOutletControlVM group
-
-
-sPDUOutletControlVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletControlVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual outlet switches. The number of
- entries is contained in the sPDUMasterStatusOutletCount OID."
- ::= { sPDUOutletControlVM 1 }
-
-sPDUOutletControlVMEntry OBJECT-TYPE
- SYNTAX OutletControlVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to control."
- INDEX { sPDUOutletControlVMIndex, sPDUOutletControlVMOutletIndex }
- ::= { sPDUOutletControlVMTable 1 }
-
-OutletControlVMEntry ::=
- SEQUENCE {
- sPDUOutletControlVMIndex INTEGER,
- sPDUOutletControlVMName DisplayString,
- sPDUOutletControlVMOutletIndex INTEGER,
- sPDUOutletControlVMOutletName DisplayString,
- sPDUOutletControlVMOutletCommand INTEGER
- }
-
-sPDUOutletControlVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM."
- ::= { sPDUOutletControlVMEntry 1 }
-
-sPDUOutletControlVMName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch VM. Maximum size is 23 characters.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletControlVMEntry 2 }
-
-sPDUOutletControlVMOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletControlVMEntry 3 }
-
-sPDUOutletControlVMOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is 23 characters.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletControlVMEntry 4 }
-
-sPDUOutletControlVMOutletCommand OBJECT-TYPE
- SYNTAX INTEGER {
- immediateOnVM (1),
- immediateOffVM (2),
- immediateRebootVM (3),
- delayedOnVM (4),
- delayedOffVM (5),
- delayedRebootVM (6),
- cancelPendingCommandVM (7)
-
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the immediateOnVM (1) value will be returned.
- If the outlet is off, the immediateOffVM (2) value will be
- returned.
-
-
- Setting this variable to immediateOnVM (1) will immediately turn the outlet on.
-
- Setting this variable to immediateOffVM (2) will immediately turn the outlet off.
-
- Setting this variable to immediateRebootVM (3) will immediately reboot the outlet.
-
- Setting this variable to delayedOnVM (4) will turn the outlet on
- after the sPDUOutletConfigVMPowerOnTime OID time has elapsed.
-
- Setting this variable to delayedOffVM (5) will turn the outlet off
- after the sPDUOutletConfigVMPowerOffTime OID time has elapsed.
-
- Setting this variable to delayedRebootVM (6) will cause the
- MasterSwitch VM to perform a delayedOffVM command, wait the
- sPDUOutletConfigVMRebootDuration OID time, and then perform the
- immediateOnVM command.
-
- Setting this variable to cancelPendingCommandVM (7) will cause any
- pending command to this outlet to be canceled."
- ::= { sPDUOutletControlVMEntry 5 }
-
--- the sPDUOutletConfigVM group
-
-sPDUOutletConfigVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletConfigVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the sPDUMasterStatusOutletCount OID."
- ::= { sPDUOutletConfigVM 1 }
-
-sPDUOutletConfigVMEntry OBJECT-TYPE
- SYNTAX OutletConfigVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to configure."
- INDEX { sPDUOutletConfigVMIndex, sPDUOutletConfigVMOutletIndex }
- ::= { sPDUOutletConfigVMTable 1 }
-
-OutletConfigVMEntry ::=
- SEQUENCE {
- sPDUOutletConfigVMIndex INTEGER,
- sPDUOutletConfigVMName DisplayString,
- sPDUOutletConfigVMOutletIndex INTEGER,
- sPDUOutletConfigVMOutletName DisplayString,
- sPDUOutletConfigVMPowerOnTime INTEGER,
- sPDUOutletConfigVMPowerOffTime INTEGER,
- sPDUOutletConfigVMRebootDuration INTEGER
- }
-
-sPDUOutletConfigVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM."
- ::= { sPDUOutletConfigVMEntry 1 }
-
-sPDUOutletConfigVMName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch VM. Maximum size is 23 characters."
- ::= { sPDUOutletConfigVMEntry 2 }
-
-sPDUOutletConfigVMOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletConfigVMEntry 3 }
-
-
-sPDUOutletConfigVMOutletName OBJECT-TYPE
- SYNTAX DisplayString ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is 23 characters."
- ::= { sPDUOutletConfigVMEntry 4 }
-
-sPDUOutletConfigVMPowerOnTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet will delay
- powering on at coldstart or when a command that requires
- a turn-on delay is issued.
-
- Allowed values are:
-
- -1 never power on.
- 0 power on immediately.
- 15 power on 15 seconds after being commanded.
- 30 power on 30 seconds after being commanded.
- 45 power on 45 seconds after being commanded.
- 60 power on 60 seconds (1 minute) after being commanded.
- 120 power on 120 seconds (2 minutes) after being commanded.
- 300 power on 300 seconds (5 minutes) after being commanded.
-
- If a value other than a supported value is provided in a
- set request, the MasterSwitch VM interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { sPDUOutletConfigVMEntry 5 }
-
-
-sPDUOutletConfigVMPowerOffTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet will delay
- powering off when a command that requires
- a turn-off delay is issued.
-
-
- Allowed values are:
-
- -1 never power off automatically.
- 0 power off immediately.
- 15 power off 15 seconds after being commanded.
- 30 power off 30 seconds after being commanded.
- 45 power off 45 seconds after being commanded.
- 60 power off 60 seconds (1 minute) after being commanded.
- 120 power off 120 seconds (2 minutes) after being commanded.
- 300 power off 300 seconds (5 minutes) after being commanded.
-
- If a value other than a supported value is provided in a
- set request, the MasterSwitch VM interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { sPDUOutletConfigVMEntry 6 }
-
-sPDUOutletConfigVMRebootDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "During a reboot sequence, power is turned off and then
- back on. This OID defines the amount of time to wait,
- in seconds, after turning the power off, at the start
- of the sequence, before turning power back on, at the
- end of the reboot sequence.
-
- Allowed values are:
-
- 5 wait 5 seconds between off/on.
- 10 wait 10 seconds between off/on.
- 15 wait 15 seconds between off/on.
- 20 wait 20 seconds between off/on.
- 30 wait 30 seconds between off/on.
- 45 wait 45 seconds between off/on.
- 60 wait 60 seconds (1 minute) between off/on.
-
- If a value other than a supported value is provided in a
- set request, the MasterSwitch VM interprets it as the next lower
- acceptable value. If the provided value is lower than
- the lowest acceptable value, the lowest acceptable
- value is used."
- ::= { sPDUOutletConfigVMEntry 7 }
-
--- the sPDUOutletStatusVM group
-
-sPDUOutletStatusVMTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletStatusVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting of status of individual outlets. The number of
- entries is contained in the sPDUMasterStatusOutletCount OID."
- ::= { sPDUOutletStatusVM 1 }
-
-sPDUOutletStatusVMEntry OBJECT-TYPE
- SYNTAX OutletStatusVMEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to gather status from."
- INDEX { sPDUOutletStatusVMIndex, sPDUOutletStatusVMOutletIndex }
- ::= { sPDUOutletStatusVMTable 1 }
-
-OutletStatusVMEntry ::=
- SEQUENCE {
- sPDUOutletStatusVMIndex INTEGER,
- sPDUOutletStatusVMName DisplayString,
- sPDUOutletStatusVMOutletIndex INTEGER,
- sPDUOutletStatusVMOutletName DisplayString,
- sPDUOutletStatusVMOutletState INTEGER,
- sPDUOutletStatusVMCommandPending INTEGER
- }
-
-sPDUOutletStatusVMIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch VM."
- ::= { sPDUOutletStatusVMEntry 1 }
-
-sPDUOutletStatusVMName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch VM. Maximum size is 23 characters."
- ::= { sPDUOutletStatusVMEntry 2 }
-
-sPDUOutletStatusVMOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletStatusVMEntry 3 }
-
-sPDUOutletStatusVMOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is 23 characters."
- ::= { sPDUOutletStatusVMEntry 4 }
-
-sPDUOutletStatusVMOutletState OBJECT-TYPE
- SYNTAX INTEGER {
- outletStatusVMOn (1),
- outletStatusVMOff (2)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the outletStatusOnVM (1) value will be returned.
- If the outlet is off, the outletStatusOffVM (2) value will be
- returned. "
- ::= { sPDUOutletStatusVMEntry 5 }
-
-sPDUOutletStatusVMCommandPending OBJECT-TYPE
- SYNTAX INTEGER {
- outletStatusVMCommandPending (1),
- outletStatusVMNoCommandPending (2)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the command pending
- state of the outlet. If a command is pending on the
- outlet, the outletStatusVMCommandPending (1) value
- will be returned. If there is not a command pending
- on the outlet, the outletStatusVMNoCommandPending (2)
- will be returned."
- ::= { sPDUOutletStatusVMEntry 6 }
-
--- the sPDUIdentMSP group
-
-sPDUIdentMSPTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch pluses controllable
- by this IP address."
- ::= { sPDUIdentMSP 1 }
-
-
-sPDUIdentMSPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IdentMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for query of the individual MasterSwitch pluses.
- The number of entries is contained in the
- sPDUIdentMSPTableSize OID."
- ::= { sPDUIdentMSP 2 }
-
-sPDUIdentMSPEntry OBJECT-TYPE
- SYNTAX IdentMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch pluses to query."
- INDEX { sPDUIdentMSPIndex}
- ::= { sPDUIdentMSPTable 1 }
-
-IdentMSPEntry ::=
- SEQUENCE {
- sPDUIdentMSPIndex INTEGER,
- sPDUIdentNameMSP DisplayString,
- sPDUIdentHardwareRevMSP DisplayString,
- sPDUIdentFirmwareRevMSP DisplayString,
- sPDUIdentDateOfManufactureMSP DisplayString,
- sPDUIdentModelNumberMSP DisplayString,
- sPDUIdentSerialNumberMSP DisplayString
- }
-
-sPDUIdentMSPIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus entry."
- ::= { sPDUIdentMSPEntry 1 }
-
-sPDUIdentNameMSP OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUIdentMSPEntry 2 }
-
-sPDUIdentHardwareRevMSP OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware version of the MasterSwitch plus.
- This value is set at the factory."
- ::= { sPDUIdentMSPEntry 3 }
-
-sPDUIdentFirmwareRevMSP OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An 6-character ID string identifying the MasterSwitch plus
- firmware version. This value is set at the factory."
- ::= { sPDUIdentMSPEntry 4 }
-
-sPDUIdentDateOfManufactureMSP OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the MasterSwitch plus was manufactured in mm/dd/yyyy format.
- This value is set at the factory. "
- ::= { sPDUIdentMSPEntry 5 }
-
-sPDUIdentModelNumberMSP OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 17-character string identifying the model number of
- the MasterSwitch plus. This value is set at the factory."
- ::= { sPDUIdentMSPEntry 6 }
-
-sPDUIdentSerialNumberMSP OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 17-character string identifying the serial number of
- the MasterSwitch plus. This value is set at the factory."
- ::= { sPDUIdentMSPEntry 7 }
-
-
--- the sPDUMasterControlMSP group
-
-sPDUMasterControlMSPTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch pluses controllable
- by this IP address."
- ::= { sPDUMasterControlMSP 1 }
-
-sPDUMasterControlMSPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MasterControlMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of the individual MasterSwitch pluses.
- The number of entries is contained in the
- sPDUMasterControlMSPTableSize OID."
- ::= { sPDUMasterControlMSP 2 }
-
-sPDUMasterControlMSPEntry OBJECT-TYPE
- SYNTAX MasterControlMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch pluses to control."
- INDEX { sPDUMasterControlMSPIndex}
- ::= { sPDUMasterControlMSPTable 1 }
-
-MasterControlMSPEntry ::=
- SEQUENCE {
- sPDUMasterControlMSPIndex INTEGER,
- sPDUMasterControlMSPName DisplayString,
- sPDUMasterControlMSPCommand INTEGER
- }
-
-sPDUMasterControlMSPIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus entry."
- ::= { sPDUMasterControlMSPEntry 1 }
-
-sPDUMasterControlMSPName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUMasterControlMSPEntry 2 }
-
-sPDUMasterControlMSPCommand OBJECT-TYPE
- SYNTAX INTEGER {
- noCommandAllMSP (1),
- immediateAllOnMSP (2),
- sequencedAllOnMSP (3),
- immediateAllOffMSP (4),
- gracefulAllRebootMSP (5),
- immediateAllRebootMSP (6),
- gracefulAllShutdownMSP (7),
- overrideAllBatCapThreshMSP (8),
- cancelAllPendingCommandsMSP (9),
- restoreFactoryDefaultsMSP (10)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to immediateAllOnMSP (2) will turn all outlets
- on immediately.
-
- Setting this OID to sequencedAllOnMSP (3) will turn all outlets
- on as defined by each outlet's sPDUOutletConfigMSPPowerOnDelay OID value.
-
- Setting this OID to immediateAllOffMSP (4) will turn all outlets
- off immediately.
-
- Setting this OID to gracefulAllRebootMSP (5) will reboot all outlets
- (after the device running PowerChute confirms shutdown) as defined
- by each outlet's sPDUOutletConfigMSPRebootDuration OID time value.
-
- Setting this OID to immediateAllRebootMSP (6) will reboot all outlets
- immediately.
-
- Setting this OID to gracefulAllShutdownMSP (7) will shutdown all outlets
- (after the device running PowerChute confirms shutdown) as defined
- by each outlet's sPDUOutletConfigMSPPowerOffDelay OID time value. Each
- outlet will then turn on after the sum of its
- sPDUOutletConfigMSPRestartDelay and sPDUOutletConfigMSPPowerOnDelay OID
- values.
-
- Setting this OID to overrideAllBatCapThreshMSP (8) will cause the
- outlet to ignore the Battery Capacity Threshold and proceed turning on
- the outlets as defined by each outlet's sPDUOutletConfigMSPPowerOnDelay
- OID value.
-
- Setting this OID to cancelAllPendingCommandsMSP (9) will cause all pending
- commands on the MasterSwitch plus to be canceled.
-
- Setting this OID to restoreFactoryDefaultsMSP (10) will cause the settings of
- the MasterSwitch plus to be restored to the factory defaults.
-
- Getting this OID will return the noCommandAllMSP (1) value."
- ::= { sPDUMasterControlMSPEntry 3 }
-
-
--- the sPDUMasterConfigMSP group
-
-sPDUMasterConfigMSPTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch pluses configurable
- by this IP address."
- ::= { sPDUMasterConfigMSP 1 }
-
-sPDUMasterConfigMSPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MasterConfigMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of the individual MasterSwitch pluses.
- The number of entries is contained in the
- sPDUMasterConfigMSPTableSize OID."
- ::= { sPDUMasterConfigMSP 2 }
-
-sPDUMasterConfigMSPEntry OBJECT-TYPE
- SYNTAX MasterConfigMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch pluses to configure."
- INDEX { sPDUMasterConfigMSPIndex}
- ::= { sPDUMasterConfigMSPTable 1 }
-
-MasterConfigMSPEntry ::=
- SEQUENCE {
- sPDUMasterConfigMSPIndex INTEGER,
- sPDUMasterConfigMSPName DisplayString,
- sPDUMasterConfigMSPPowerOnTimeDelay INTEGER,
- sPDUMasterConfigMSPManualButton INTEGER
- }
-
-sPDUMasterConfigMSPIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus entry."
- ::= { sPDUMasterConfigMSPEntry 1 }
-
-sPDUMasterConfigMSPName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. Maximum size is 23 characters."
- ::= { sPDUMasterConfigMSPEntry 2 }
-
-sPDUMasterConfigMSPPowerOnTimeDelay OBJECT-TYPE
- SYNTAX INTEGER (0..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in seconds, between when
- power is provided to the MasterSwitch plus and
- when the MasterSwitch plus provides basic master
- power to the outlets.
-
- Allowed values are:
-
- 0 - 9999 seconds (0 - 2hrs, 46 mins, 39 secs).
- 0 indicates to apply power immediately."
- ::= { sPDUMasterConfigMSPEntry 3 }
-
-
-sPDUMasterConfigMSPManualButton OBJECT-TYPE
- SYNTAX INTEGER {
- manualButtonDisabled (1),
- manualButtonEnabled (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to manualButtonDisabled (1) will disable
- the manual button on the MasterSwitch plus.
-
- Setting this OID to manualButtonEnabled (2) will enable
- the manual button on the MasterSwitch plus."
- ::= { sPDUMasterConfigMSPEntry 4 }
-
--- the sPDUMasterStatusMSP group
-
-sPDUMasterStatusMSPTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of MasterSwitch pluses at
- this IP address."
- ::= { sPDUMasterStatusMSP 1 }
-
-
-sPDUMasterStatusMSPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MasterStatusMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for gathering of status from the individual
- MasterSwitch pluses. The number of entries is contained
- in the sPDUMasterStatusMSPTableSize OID."
- ::= { sPDUMasterStatusMSP 2 }
-
-sPDUMasterStatusMSPEntry OBJECT-TYPE
- SYNTAX MasterStatusMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The MasterSwitch pluses to gather status from."
- INDEX { sPDUMasterStatusMSPIndex}
- ::= { sPDUMasterStatusMSPTable 1 }
-
-MasterStatusMSPEntry ::=
- SEQUENCE {
- sPDUMasterStatusMSPIndex INTEGER,
- sPDUMasterStatusMSPName DisplayString,
- sPDUMasterStatusMSPOutletCount INTEGER
- }
-
-sPDUMasterStatusMSPIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus entry."
- ::= { sPDUMasterStatusMSPEntry 1 }
-
-sPDUMasterStatusMSPName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUMasterStatusMSPEntry 2 }
-
-sPDUMasterStatusMSPOutletCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the number of controllable
- outlets for this MasterSwitch plus."
- ::= { sPDUMasterStatusMSPEntry 3 }
-
--- the sPDUOutletControlMSP group
-
-sPDUOutletControlMSPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletControlMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual outlet switches. The number of
- entries is contained in the sPDUMasterStatusMSPOutletCount OID."
- ::= { sPDUOutletControlMSP 1 }
-
-sPDUOutletControlMSPEntry OBJECT-TYPE
- SYNTAX OutletControlMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to control."
- INDEX { sPDUOutletControlMSPIndex, sPDUOutletControlMSPOutletIndex }
- ::= { sPDUOutletControlMSPTable 1 }
-
-OutletControlMSPEntry ::=
- SEQUENCE {
- sPDUOutletControlMSPIndex INTEGER,
- sPDUOutletControlMSPName DisplayString,
- sPDUOutletControlMSPOutletIndex INTEGER,
- sPDUOutletControlMSPOutletName DisplayString,
- sPDUOutletControlMSPOutletCommand INTEGER
- }
-
-sPDUOutletControlMSPIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus."
- ::= { sPDUOutletControlMSPEntry 1 }
-
-sPDUOutletControlMSPName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUOutletControlMSPEntry 2 }
-
-sPDUOutletControlMSPOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletControlMSPEntry 3 }
-
-sPDUOutletControlMSPOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. The maximum size is
- 23 characters. The name is set by using the
- sPDUOutletConfigMSPallOutletName OID.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletControlMSPEntry 4 }
-
-sPDUOutletControlMSPOutletCommand OBJECT-TYPE
- SYNTAX INTEGER {
- immediateOnMSP (1),
- delayedOnMSP (2),
- immediateOffMSP (3),
- gracefulRebootMSP (4),
- immediateRebootMSP (5),
- gracefulshutdownMSP (6),
- overrideBatCapThreshMSP (7),
- cancelPendingCommandMSP (8)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the immediateOnMSP (1) value will be returned.
- If the outlet is off, the immediateOffMSP (3) value will be
- returned.
-
- Setting this variable to immediateOnMSP (1) will immediately turn the outlet on.
-
- Setting this variable to delayedOnMSP (2) will turn the outlet on
- after the sPDUOutletConfigMSPPowerOnDelay OID time has elapsed.
-
- Setting this variable to immediateOffMSP (3) will immediately turn the outlet off.
-
- Setting this variable to gracefulRebootMSP (4) will cause the outlet to wait for
- device confirmation (if applicable) and then turn the outlet off after the
- sPDUOutletConfigMSPPowerOffDelay OID time has elapsed. The outlet will then turn
- on after the sPDUOutletConfigMSPRebootDuration OID time has elapsed.
-
- Setting this variable to immediateRebootMSP (5) will immediately reboot the outlet.
-
- Setting this variable to gracefulshutdownMSP (6) will cause the outlet to wait for
- device confirmation (if applicable) and then turn the outlet off after the
- sPDUOutletConfigMSPPowerOffDelay OID time has elapsed. The outlet will then turn
- on after the sum of the sPDUOutletConfigMSPRestartTime OID time and the
- sPDUOutletConfigMSPPowerOnDelay OID time has elapsed.
-
- Setting this variable to overrideBatCapThreshMSP (7) will cause the outlet to
- ignore the Battery Capacity Threshold and proceed waiting on the
- sPDUOutletConfigMSPPowerOnDelay OID time before turning the outlet on.
-
- Setting this variable to cancelPendingCommandMSP (8) will cause any
- pending command to this outlet to be canceled."
- ::= { sPDUOutletControlMSPEntry 5 }
-
--- the sPDUOutletConfigMSPall group
-
-sPDUOutletConfigMSPallTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletConfigMSPallEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the sPDUMasterStatusMSPOutletCount OID."
- ::= { sPDUOutletConfigMSPall 1 }
-
-sPDUOutletConfigMSPallEntry OBJECT-TYPE
- SYNTAX OutletConfigMSPallEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to configure."
- INDEX { sPDUOutletConfigMSPallIndex, sPDUOutletConfigMSPallOutletIndex }
- ::= { sPDUOutletConfigMSPallTable 1 }
-
-OutletConfigMSPallEntry ::=
- SEQUENCE {
- sPDUOutletConfigMSPallIndex INTEGER,
- sPDUOutletConfigMSPallName DisplayString,
- sPDUOutletConfigMSPallOutletIndex INTEGER,
- sPDUOutletConfigMSPallOutletName DisplayString,
- sPDUOutletConfigMSPallOutletCtrlMode INTEGER
- }
-
-sPDUOutletConfigMSPallIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus."
- ::= { sPDUOutletConfigMSPallEntry 1 }
-
-sPDUOutletConfigMSPallName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUOutletConfigMSPallEntry 2 }
-
-sPDUOutletConfigMSPallOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletConfigMSPallEntry 3 }
-
-sPDUOutletConfigMSPallOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is 23 characters."
- ::= { sPDUOutletConfigMSPallEntry 4 }
-
-sPDUOutletConfigMSPallOutletCtrlMode OBJECT-TYPE
- SYNTAX INTEGER {
- modeGracefulShutdown (1),
- modeAnnunciator (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to modeGracefulShutdown (1) will put this
- outlet into the Graceful Shutdown control mode.
-
- Setting this OID to modeAnnunciator (2) will put this outlet
- into the Annunciator control mode."
- ::= { sPDUOutletConfigMSPallEntry 5 }
-
-
--- the sPDUOutConfigMSPgs group
-
-sPDUOutletConfigMSPgsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletConfigMSPgsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the sPDUMasterStatusMSPOutletCount OID."
- ::= { sPDUOutletConfigMSPgs 1 }
-
-sPDUOutletConfigMSPgsEntry OBJECT-TYPE
- SYNTAX OutletConfigMSPgsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to configure."
- INDEX { sPDUOutletConfigMSPgsIndex, sPDUOutletConfigMSPgsOutletIndex }
- ::= { sPDUOutletConfigMSPgsTable 1 }
-
-OutletConfigMSPgsEntry ::=
- SEQUENCE {
- sPDUOutletConfigMSPgsIndex INTEGER,
- sPDUOutletConfigMSPgsName DisplayString,
- sPDUOutletConfigMSPgsOutletIndex INTEGER,
- sPDUOutletConfigMSPgsOutletName DisplayString,
- sPDUOutletConfigMSPgsOutletCtrlMode INTEGER,
- sPDUOutletConfigMSPgsDeviceConfirm INTEGER,
- sPDUOutletConfigMSPgsLowBattWarning INTEGER,
- sPDUOutletConfigMSPgsLowBattMult INTEGER,
- sPDUOutletConfigMSPgsRestartDelay INTEGER,
- sPDUOutletConfigMSPgsPowerOnDelay INTEGER,
- sPDUOutletConfigMSPgsPowerOffDelay INTEGER,
- sPDUOutletConfigMSPgsBattCapThresh INTEGER,
- sPDUOutletConfigMSPgsRebootDuration INTEGER
- }
-
-sPDUOutletConfigMSPgsIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus."
- ::= { sPDUOutletConfigMSPgsEntry 1 }
-
-sPDUOutletConfigMSPgsName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUOutletConfigMSPgsEntry 2 }
-
-sPDUOutletConfigMSPgsOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletConfigMSPgsEntry 3 }
-
-sPDUOutletConfigMSPgsOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. The maximum size is
- 23 characters. The name is set by using the
- sPDUOutletConfigMSPallOutletName OID.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletConfigMSPgsEntry 4 }
-
-sPDUOutletConfigMSPgsOutletCtrlMode OBJECT-TYPE
- SYNTAX INTEGER {
- modeGracefulShutdown (1),
- modeAnnunciator (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Control Mode of the outlet.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletConfigMSPgsEntry 5 }
-
-sPDUOutletConfigMSPgsDeviceConfirm OBJECT-TYPE
- SYNTAX INTEGER {
- deviceConfirmNo (1),
- deviceConfirmYes (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to deviceConfirmNo (1) cause the outlet to
- NOT wait for device confirmation while performing graceful
- operations.
-
- Setting this OID to deviceConfirmYes (2) cause the outlet to
- wait for device confirmation while performing graceful
- operations."
- ::= { sPDUOutletConfigMSPgsEntry 6 }
-
-sPDUOutletConfigMSPgsLowBattWarning OBJECT-TYPE
- SYNTAX INTEGER (-2..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in 6 second intervals, between
- when the UPS goes on battery and the power down sequence for
- the outlet is initiated.
-
- Allowed values are:
-
- -2 - Never initiate the power down sequence on low battery warning.
- -1 - Initiate power down sequence based on remaining runtime.
- 1 - 9999 six second intervals (6 secs - 16hrs, 39 mins, 54 secs).
- 0 indicates to immediately initiate power down sequence on low
- battery warning."
- ::= { sPDUOutletConfigMSPgsEntry 7 }
-
-sPDUOutletConfigMSPgsLowBattMult OBJECT-TYPE
- SYNTAX INTEGER (1..7)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " Only applicable if sPDUOutletConfigMSPgsLowBattWarning OID is
- set to -1 (On Runtime Remaining).
-
- Allows you to set the value to stagger the shutdown sequence of the outlets.
- 1 provides the longest delay (the outlet to shutoff first), and 7 would
- provide the shortest delay (the outlet to shut off last).
-
- Allowed values are:
- 1 - 7."
- ::= { sPDUOutletConfigMSPgsEntry 8 }
-
-sPDUOutletConfigMSPgsRestartDelay OBJECT-TYPE
- SYNTAX INTEGER (-1..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in 6 minute intervals, between
- when the outlet is turned off and the outlet is turned back on
- when performing a Graceful Shutdown.
-
- Allowed values are:
-
- -1 - Never turn outlet back on after a Graceful shutdown.
- 0 - 9999 six minute intervals (0 - 999hrs, 54 mins)."
- ::= { sPDUOutletConfigMSPgsEntry 9 }
-
-sPDUOutletConfigMSPgsPowerOnDelay OBJECT-TYPE
- SYNTAX INTEGER (-1..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in seconds, between the UPS entering
- normal (on-line) state and the outlet being powered on.
-
- Allowed values are:
-
- -1 - Remain Off when the UPS enters the on-line state.
- 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
- ::= { sPDUOutletConfigMSPgsEntry 10 }
-
-
-sPDUOutletConfigMSPgsPowerOffDelay OBJECT-TYPE
- SYNTAX INTEGER (0..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in seconds, between when the server
- shuts down and the outlet is powered off.
-
- Allowed values are:
-
- 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
- ::= { sPDUOutletConfigMSPgsEntry 11 }
-
-sPDUOutletConfigMSPgsBattCapThresh OBJECT-TYPE
- SYNTAX INTEGER (0..100)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The minimum battery capacity, as a percent (0-100%), required
- of the UPS before an outlet will be allowed to power on.
-
- Allowed values are:
-
- 0 - 100 percent."
- ::= { sPDUOutletConfigMSPgsEntry 12 }
-
-sPDUOutletConfigMSPgsRebootDuration OBJECT-TYPE
- SYNTAX INTEGER (0..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of delay, in seconds, from outlet off until
- outlet on during a reboot.
-
- Allowed values are:
-
- 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
- ::= { sPDUOutletConfigMSPgsEntry 13 }
-
-
--- the sPDUOutConfigMSPannun group
-
-sPDUOutletConfigMSPannunTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletConfigMSPannunEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the sPDUMasterStatusMSPOutletCount OID."
- ::= { sPDUOutletConfigMSPannun 1 }
-
-sPDUOutletConfigMSPannunEntry OBJECT-TYPE
- SYNTAX OutletConfigMSPannunEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to configure."
- INDEX { sPDUOutletConfigMSPannunIndex, sPDUOutletConfigMSPannunOutletIndex }
- ::= { sPDUOutletConfigMSPannunTable 1 }
-
-OutletConfigMSPannunEntry ::=
- SEQUENCE {
- sPDUOutletConfigMSPannunIndex INTEGER,
- sPDUOutletConfigMSPannunName DisplayString,
- sPDUOutletConfigMSPannunOutletIndex INTEGER,
- sPDUOutletConfigMSPannunOutletName DisplayString,
- sPDUOutletConfigMSPannunOutletCtrlMode INTEGER,
- sPDUOutletConfigMSPannunInitialState INTEGER,
- sPDUOutletConfigMSPannunAlarmActionDly INTEGER
- }
-
-sPDUOutletConfigMSPannunIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus."
- ::= { sPDUOutletConfigMSPannunEntry 1 }
-
-sPDUOutletConfigMSPannunName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUOutletConfigMSPannunEntry 2 }
-
-sPDUOutletConfigMSPannunOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletConfigMSPannunEntry 3 }
-
-sPDUOutletConfigMSPannunOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. The maximum size is
- 23 characters. The name is set by using the
- sPDUOutletConfigMSPallOutletName OID.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletConfigMSPannunEntry 4 }
-
-sPDUOutletConfigMSPannunOutletCtrlMode OBJECT-TYPE
- SYNTAX INTEGER {
- modeGracefulShutdown (1),
- modeAnnunciator (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Control Mode of the outlet.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletConfigMSPannunEntry 5 }
-
-sPDUOutletConfigMSPannunInitialState OBJECT-TYPE
- SYNTAX INTEGER {
- initialStateOff (1),
- initialStateOn (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to initialStateOff (1) causes the outlet
- to default to off when in the non-alarmed condition.
-
- Setting this OID to initialStateOn (2) causes the outlet
- to default to on when in the non-alarmed condition."
- ::= { sPDUOutletConfigMSPannunEntry 6 }
-
-sPDUOutletConfigMSPannunAlarmActionDly OBJECT-TYPE
- SYNTAX INTEGER (0..9999)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- " The amount of time, in seconds, that an enabled Measure-UPS
- alarm must be asserted before an alarm condition is recognized.
-
- Allowed values are:
-
- 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs)."
- ::= { sPDUOutletConfigMSPannunEntry 7 }
-
-
--- the sPDUOutConfigMSPmups group
-
-sPDUOutletConfigMSPmupsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletConfigMSPmupsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the sPDUMasterStatusMSPOutletCount OID."
- ::= { sPDUOutletConfigMSPmups 1 }
-
-sPDUOutletConfigMSPmupsEntry OBJECT-TYPE
- SYNTAX OutletConfigMSPmupsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to configure."
- INDEX { sPDUOutletConfigMSPmupsIndex, sPDUOutletConfigMSPmupsOutletIndex }
- ::= { sPDUOutletConfigMSPmupsTable 1 }
-
-OutletConfigMSPmupsEntry ::=
- SEQUENCE {
- sPDUOutletConfigMSPmupsIndex INTEGER,
- sPDUOutletConfigMSPmupsName DisplayString,
- sPDUOutletConfigMSPmupsOutletIndex INTEGER,
- sPDUOutletConfigMSPmupsOutletName DisplayString,
- sPDUOutletConfigMSPmupsZone1 INTEGER,
- sPDUOutletConfigMSPmupsZone2 INTEGER,
- sPDUOutletConfigMSPmupsZone3 INTEGER,
- sPDUOutletConfigMSPmupsZone4 INTEGER,
- sPDUOutletConfigMSPmupsP1LowHum INTEGER,
- sPDUOutletConfigMSPmupsP1HiHum INTEGER,
- sPDUOutletConfigMSPmupsP1LowTemp INTEGER,
- sPDUOutletConfigMSPmupsP1HiTemp INTEGER,
- sPDUOutletConfigMSPmupsP2LowHum INTEGER,
- sPDUOutletConfigMSPmupsP2HiHum INTEGER,
- sPDUOutletConfigMSPmupsP2LowTemp INTEGER,
- sPDUOutletConfigMSPmupsP2HiTemp INTEGER
- }
-
-sPDUOutletConfigMSPmupsIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch plus."
- ::= { sPDUOutletConfigMSPmupsEntry 1 }
-
-sPDUOutletConfigMSPmupsName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUOutletConfigMSPmupsEntry 2 }
-
-sPDUOutletConfigMSPmupsOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletConfigMSPmupsEntry 3 }
-
-sPDUOutletConfigMSPmupsOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. The maximum size is
- 23 characters. The name is set by using the
- sPDUOutletConfigMSPallOutletName OID.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletConfigMSPmupsEntry 4 }
-
-sPDUOutletConfigMSPmupsZone1 OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Zone 1 alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Zone 1 alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 5 }
-
-sPDUOutletConfigMSPmupsZone2 OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Zone 2 alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Zone 2 alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 6 }
-
-sPDUOutletConfigMSPmupsZone3 OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Zone 3 alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Zone 3 alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 7 }
-
-sPDUOutletConfigMSPmupsZone4 OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Zone 4 alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Zone 4 alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 8 }
-
-sPDUOutletConfigMSPmupsP1LowHum OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 1 low humidity alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 1 low humidity alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 9 }
-
-sPDUOutletConfigMSPmupsP1HiHum OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 1 high humidity alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 1 high humidity alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 10 }
-
-sPDUOutletConfigMSPmupsP1LowTemp OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 1 low temperature alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 1 low temperature alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 11 }
-
-sPDUOutletConfigMSPmupsP1HiTemp OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 1 high temperature alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 1 high temperature alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 12 }
-
-sPDUOutletConfigMSPmupsP2LowHum OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 2 low humidity alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 2 low humidity alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 13 }
-
-sPDUOutletConfigMSPmupsP2HiHum OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 2 high humidity alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 2 high humidity alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 14 }
-
-sPDUOutletConfigMSPmupsP2LowTemp OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 2 low temperature alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 2 low temperature alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 15 }
-
-sPDUOutletConfigMSPmupsP2HiTemp OBJECT-TYPE
- SYNTAX INTEGER {
- disableAlarm (1),
- enableAlarm (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to disableAlarm (1) disables the
- Probe 2 high temperature alarm for this outlet.
-
- Setting this OID to enableAlarm (2) enables the
- Probe 2 high temperature alarm for this outlet."
- ::= { sPDUOutletConfigMSPmupsEntry 16 }
-
--- the sPDUOutletStatusMSP group
-
-sPDUOutletStatusMSPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletStatusMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting of status of individual outlets. The number of
- entries is contained in the sPDUMasterStatusOutletCount OID."
- ::= { sPDUOutletStatusMSP 1 }
-
-sPDUOutletStatusMSPEntry OBJECT-TYPE
- SYNTAX OutletStatusMSPEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to gather status from."
- INDEX { sPDUOutletStatusMSPIndex, sPDUOutletStatusMSPOutletIndex }
- ::= { sPDUOutletStatusMSPTable 1 }
-
-OutletStatusMSPEntry ::=
- SEQUENCE {
- sPDUOutletStatusMSPIndex INTEGER,
- sPDUOutletStatusMSPName DisplayString,
- sPDUOutletStatusMSPOutletIndex INTEGER,
- sPDUOutletStatusMSPOutletName DisplayString,
- sPDUOutletStatusMSPOutletState INTEGER,
- sPDUOutletStatusMSPCommandPending INTEGER,
- sPDUOutletStatusMSPOutletCtrlMode INTEGER
- }
-
-sPDUOutletStatusMSPIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the MasterSwitch MSP."
- ::= { sPDUOutletStatusMSPEntry 1 }
-
-sPDUOutletStatusMSPName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the MasterSwitch plus. The maximum
- value is 23 characters. The name is set by
- using the sPDUMasterConfigMSPName OID."
- ::= { sPDUOutletStatusMSPEntry 2 }
-
-sPDUOutletStatusMSPOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { sPDUOutletStatusMSPEntry 3 }
-
-sPDUOutletStatusMSPOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. The maximum size is
- 23 characters. The name is set by using the
- sPDUOutletConfigMSPallOutletName OID.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletStatusMSPEntry 4 }
-
-sPDUOutletStatusMSPOutletState OBJECT-TYPE
- SYNTAX INTEGER {
- outletStatusMSPOn (1),
- outletStatusMSPOff (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the outletStatusMSPOn (1) value will be returned.
- If the outlet is off, the outletStatusMSPOff (2) value will be
- returned. "
- ::= { sPDUOutletStatusMSPEntry 5 }
-
-sPDUOutletStatusMSPCommandPending OBJECT-TYPE
- SYNTAX INTEGER {
- outletStatusMSPCommandPending (1),
- outletStatusMSPNoCommandPending (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the command pending
- state of the outlet. If a command is pending on the
- outlet, the outletStatusMSPCommandPending (1) value
- will be returned. If there is not a command pending
- on the outlet, the outletStatusMSPNoCommandPending (2)
- will be returned."
- ::= { sPDUOutletStatusMSPEntry 6 }
-
-sPDUOutletStatusMSPOutletCtrlMode OBJECT-TYPE
- SYNTAX INTEGER {
- modeGracefulShutdown (1),
- modeAnnunciator (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Control Mode of the outlet.
- This OID is provided for informational purposes only."
- ::= { sPDUOutletStatusMSPEntry 7 }
-
-
--- the rPDUIdent group
-
-rPDUIdentName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the Rack PDU.
- The maximum string size is device dependent."
- ::= { rPDUIdent 1 }
-
-rPDUIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the Rack PDU.
- This value is set at the factory."
- ::= { rPDUIdent 2 }
-
-rPDUIdentFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An 8-byte ID string identifying the Rack PDU firmware revision.
- This value is set at the factory."
- ::= { rPDUIdent 3 }
-
-
-rPDUIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the Rack PDU was manufactured in mm/dd/yy format.
- This value is set at the factory. The year 2000 will be
- represented by 00."
- ::= { rPDUIdent 4 }
-
-rPDUIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 10-character string identifying the model number of
- the Rack PDU. This value is set at the factory."
- ::= { rPDUIdent 5 }
-
-rPDUIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 12-character string identifying the serial number of
- the Rack PDU. This value is set at the factory."
- ::= { rPDUIdent 6 }
-
-rPDUIdentDeviceRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the electrical rating of the device."
-
- ::= { rPDUIdent 7 }
-
-rPDUIdentDeviceNumOutlets OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the number of outlets contained in the device."
-
- ::= { rPDUIdent 8 }
-
-rPDUIdentDeviceNumPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the number of phases supported by the device."
-
- ::= { rPDUIdent 9 }
-
-rPDUIdentDeviceNumBreakers OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the number of circuit breakers supported by the device.
- This is the same as the number of banks of outlets."
-
- ::= { rPDUIdent 10 }
-
-rPDUIdentDeviceBreakerRating OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return rating of the circuit breakers on the device if it has any."
-
- ::= { rPDUIdent 11 }
-
-rPDUIdentDeviceOrientation OBJECT-TYPE
- SYNTAX INTEGER {
- orientHorizontal (1),
- orientVertical (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the intended physical orientation of the device.
-
- OrientHorizonatal(1) indicates Horizontal.
- OrientVertical(2) indicates Vertical."
-
- ::= { rPDUIdent 12 }
-
-rPDUIdentDeviceOutletLayout OBJECT-TYPE
- SYNTAX INTEGER {
- seqPhaseToNeutral (1),
- seqPhaseToPhase (2),
- seqPhToNeu21PhToPh (3),
- seqPhToPhGrouped (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return outlet layout for the device.
-
- SeqPhaseToNeutral(1) indicates outlet layout as follows:
- 1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,...
-
- SeqPhaseToPhase(2) indicates outlet layout as follows:
- 1:1-2,2:2-3,3:3-1,4:1-2,5:2-3,...
-
- SeqPhToNeu21PhToPh(3) indicates outlet layout as follows:
- 1:1-N,2:2-N...21:3-N,22:1-2,23:2-3,24:3-1,...
-
- SeqPhToPhGrouped(4) indicates outlet layout as follows:
- Otlts1-8::(3-1),Otlts9-16::(2-3),Otlts17-24::(1-2)."
- ::= { rPDUIdent 13 }
-
-
-
--- the rPDULoadDevice group
-
-rPDULoadDevMaxPhaseLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the maximum rated power
- that each phase of the Rack PDU can provide. It is
- represented in Amps."
- ::= { rPDULoadDevice 1 }
-
-rPDULoadDevNumPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of phases available with this Rack PDU."
- ::= { rPDULoadDevice 2 }
-
-rPDULoadDevMaxBankLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the maximum rated power
- that each bank of the Rack PDU can provide. It is
- represented in Amps.
-
- 0 will be returned if the device does not have any banks."
-
- ::= { rPDULoadDevice 3 }
-
-rPDULoadDevNumBanks OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of banks of outlets available with this Rack PDU.
- A bank of outlets has a unique circuit breaker for a subset
- of the total number of outlets on the rPDU."
- ::= { rPDULoadDevice 4 }
-
--- the rPDULoadPhaseConfig group
-
-rPDULoadPhaseConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LoadPhaseConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of each Rack PDU phase.
- The number of entries is contained in the
- rPDULoadDevNumPhases OID."
- ::= { rPDULoadPhaseConfig 1 }
-
-rPDULoadPhaseConfigEntry OBJECT-TYPE
- SYNTAX LoadPhaseConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Rack PDU phase to configure."
- INDEX { rPDULoadPhaseConfigIndex}
- ::= { rPDULoadPhaseConfigTable 1 }
-
-LoadPhaseConfigEntry ::=
- SEQUENCE {
- rPDULoadPhaseConfigIndex INTEGER,
- rPDULoadPhaseConfigLowLoadThreshold INTEGER,
- rPDULoadPhaseConfigNearOverloadThreshold INTEGER,
- rPDULoadPhaseConfigOverloadThreshold INTEGER
- }
-
-rPDULoadPhaseConfigIndex OBJECT-TYPE
- SYNTAX INTEGER {
- phase1 (1),
- phase2 (2),
- phase3 (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Rack PDU phase entry."
- ::= { rPDULoadPhaseConfigEntry 1 }
-
-rPDULoadPhaseConfigLowLoadThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load is nearing a low consumption condition. It is
- represented in amps. A warning will be issued when the
- load is less than the threshold value.
-
- A threshold value of 0 amps effectively disables this
- warning.
-
- Maximum value must be less than the value returned
- by the rPDULoadPhaseConfigNearOverloadThreshold OID."
- ::= { rPDULoadPhaseConfigEntry 2 }
-
-rPDULoadPhaseConfigNearOverloadThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load is nearing an overload condition. It is
- represented in amps. A warning will be issued when the
- load is greater than or equal to the threshold value.
-
- Minimum value must be greater than the value returned by
- the rPDULoadPhaseConfigLowLoadThreshold OID.
-
- Maximum value must be less than or equal to the value
- returned by the rPDULoadPhaseConfigOverloadThreshold OID."
- ::= { rPDULoadPhaseConfigEntry 3 }
-
-rPDULoadPhaseConfigOverloadThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load has entered an overload condition. It is
- represented in amps. A warning will be issued when the
- load is greater than or equal to the threshold value.
-
- Minimum value must be greater than or equal to the value
- returned by the rPDULoadPhaseConfigNearOverloadThreshold OID.
-
- Maximum value must be less than or equal to the value
- returned by the rPDULoadDevMaxPhaseLoad OID."
- ::= { rPDULoadPhaseConfigEntry 4 }
-
-
--- the rPDULoadStatus group
-
-rPDULoadStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LoadStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting of status of each Rack PDU phase/bank.
- The number of entries is calculated by adding
- the number of phases (rPDULoadDevNumPhases OID) and
- the number of banks of outlets (rPDULoadDevNumBanks)
- Number of entries = #phases + #banks.
- NOTE: If a device has phase and bank information, all phase information
- shall preceed the bank information."
- ::= { rPDULoadStatus 1 }
-
-rPDULoadStatusEntry OBJECT-TYPE
- SYNTAX LoadStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Rack PDU phase/bank to gather status from."
- INDEX { rPDULoadStatusIndex}
- ::= { rPDULoadStatusTable 1 }
-
-LoadStatusEntry ::=
- SEQUENCE {
- rPDULoadStatusIndex INTEGER,
- rPDULoadStatusLoad Gauge,
- rPDULoadStatusLoadState INTEGER,
- rPDULoadStatusPhaseNumber INTEGER,
- rPDULoadStatusBankNumber INTEGER
- }
-
-rPDULoadStatusIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Rack PDU phase/bank entry. All phase information will preceed
- any bank information"
- ::= { rPDULoadStatusEntry 1 }
-
-rPDULoadStatusLoad OBJECT-TYPE
- SYNTAX Gauge
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the phase/bank load measured
- in tenths of amps."
- ::= { rPDULoadStatusEntry 2 }
-
-rPDULoadStatusLoadState OBJECT-TYPE
- SYNTAX INTEGER {
- phaseLoadNormal (1),
- phaseLoadLow (2),
- phaseLoadNearOverload (3),
- phaseLoadOverload (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the phase/bank load state.
-
- phaseLoadNormal(1) indicates that the phase/bank is
- operating properly within the rPDULoadConfigLowLoadThreshold
- and rPDULoadConfigNearOverloadThreshold OID values.
-
- phaseLoadLow(2) indicates that the phase/bank load has
- dropped below the rPDULoadConfigLowLoadThreshold OID value.
- An SNMP trap will occur when this state is entered or cleared.
-
- phaseLoadNearOverload(3) indicates that the phase/bank load
- is greater than or equal to the
- rPDULoadConfigNearOverloadThreshold OID value.
- An SNMP trap will occur when this state is entered or cleared.
-
- phaseLoadOverload(4) indicates that the phase/bank load is
- greater than or equal to the rPDULoadConfigOverloadThreshold
- OID value.
- An SNMP trap will occur when this state is entered or cleared."
- ::= { rPDULoadStatusEntry 3 }
-
-rPDULoadStatusPhaseNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The phase number to which this record refers. A value of 0 will be returned if
- this is bank related information."
- ::= { rPDULoadStatusEntry 4 }
-
-rPDULoadStatusBankNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The bank number to which this record refers. A value of 0 will be returned if
- this is phase related information."
- ::= { rPDULoadStatusEntry 5 }
-
--- the rPDULoadBankConfig group
-
-rPDULoadBankConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LoadBankConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of each Rack PDU bank.
- The number of entries is contained in the
- rPDULoadDevNumBanks OID."
- ::= { rPDULoadBankConfig 1 }
-
-rPDULoadBankConfigEntry OBJECT-TYPE
- SYNTAX LoadBankConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Rack PDU bank to configure."
- INDEX { rPDULoadBankConfigIndex}
- ::= { rPDULoadBankConfigTable 1 }
-
-LoadBankConfigEntry ::=
- SEQUENCE {
- rPDULoadBankConfigIndex INTEGER,
- rPDULoadBankConfigLowLoadThreshold INTEGER,
- rPDULoadBankConfigNearOverloadThreshold INTEGER,
- rPDULoadBankConfigOverloadThreshold INTEGER
- }
-
-rPDULoadBankConfigIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Rack PDU bank entry."
- ::= { rPDULoadBankConfigEntry 1 }
-
-rPDULoadBankConfigLowLoadThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load is nearing a low consumption condition. It is
- represented in amps. A warning will be issued when the
- load is less than the threshold value.
-
- A threshold value of 0 amps effectively disables this
- warning.
-
- Maximum value must be less than the value returned
- by the rPDULoadBankConfigNearOverloadThreshold OID.
-
- -1 will be returned if the device has no banks."
-
- ::= { rPDULoadBankConfigEntry 2 }
-
-rPDULoadBankConfigNearOverloadThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load is nearing an overload condition. It is
- represented in amps. A warning will be issued when the
- load is greater than or equal to the threshold value.
-
- Minimum value must be greater than the value returned by
- the rPDULoadBankConfigLowLoadThreshold OID.
-
- Maximum value must be less than or equal to the value
- returned by the rPDULoadBankConfigOverloadThreshold OID.
-
- -1 will be returned if the device has no banks."
-
- ::= { rPDULoadBankConfigEntry 3 }
-
-rPDULoadBankConfigOverloadThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold that indicates the power consumption of
- the load has entered an overload condition. It is
- represented in amps. A warning will be issued when the
- load is greater than or equal to the threshold value.
-
- Minimum value must be greater than or equal to the value
- returned by the rPDULoadBankConfigNearOverloadThreshold OID.
-
- Maximum value must be less than or equal to the value
- returned by the rPDULoadDevMaxBankLoad OID.
-
- -1 will be returned if the device has no banks."
-
- ::= { rPDULoadBankConfigEntry 4 }
-
-
--- the rPDUOutletDevice group
-
-rPDUOutletDevCommand OBJECT-TYPE
- SYNTAX INTEGER {
- noCommandAll (1),
- immediateAllOn (2),
- immediateAllOff (3),
- immediateAllReboot (4),
- delayedAllOn (5),
- delayedAllOff (6),
- delayedAllReboot (7),
- cancelAllPendingCommands (8),
- gracefulAllOff (9),
- gracefulAllReboot (10)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this OID to immediateAllOn (2) will turn all outlets
- on immediately.
-
- Setting this OID to immediateAllOff (3) will turn all outlets
- off immediately.
-
- Setting this OID to immediateAllReboot (4) will reboot all outlets
- immediately.
-
- Setting this OID to delayedAllOn (5) will turn all outlets on as
- defined by each outlet's rPDUOutletConfigPowerOnTime OID value.
-
- Setting this OID to delayedAllOff (6) will turn all outlets
- off as defined by each outlet's rPDUOutletConfigPowerOffTime OID value.
-
- Setting this OID to delayedAllReboot (7) will cause a
- delayedAllOff command to be performed. Once all outlets are off,
- the Switched Rack PDU will then delay the largest
- rPDUOutletConfigRebootDuration OID time, and then perform a
- delayedAllOn command.
-
- Setting this OID to cancelAllPendingCommands (8) will cause all pending
- commands on the Switched Rack PDU to be canceled.
-
- Setting this variable to gracefulAllOff (9) will cause the
- Switched Rack PDU to shut all outlets off after it waits the
- servers graceful shutdown time and each outlet's shutdown delay.
-
- Setting this variable to gracefulAllReboot (10) will cause the
- Switched Rack PDU to shut all outlets off after it waits the
- servers graceful shutdown time and each outlet's shutdown delay.
- Once all outlet are off, it will wait until the UPS reaches the
- configured minimum return battery capacity, then each outlet's
- return delay before it turns the outlet back on.
-
- Getting this OID will return the noCommandAll (1) value."
- ::= { rPDUOutletDevice 1 }
-
-rPDUOutletDevColdstartDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of delay, in seconds, between when
- power is provided to the Switched Rack PDU and
- when the Switched Rack PDU provides basic master
- power to the outlets.
-
- Allowed values are:
-
- -1 - never apply power automatically.
- 0 - apply power immediately.
- 1 to 300 - delay up to 300 seconds (5 minutes)."
- ::= { rPDUOutletDevice 2 }
-
-rPDUOutletDevNumCntrlOutlets OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of controlled outlets on this Switched Rack PDU."
- ::= { rPDUOutletDevice 3 }
-
-rPDUOutletDevNumTotalOutlets OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of outlets on this Rack PDU."
- ::= { rPDUOutletDevice 4 }
-
-
--- the rPDUOutletPhase group
-
-rPDUOutletPhaseTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for management of outlets on a per phase basis."
- ::= { rPDUOutletPhase 1 }
-
-rPDUOutletPhaseEntry OBJECT-TYPE
- SYNTAX OutletPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The phase to manage."
- INDEX { rPDUOutletPhaseIndex}
- ::= { rPDUOutletPhaseTable 1 }
-
-OutletPhaseEntry ::=
- SEQUENCE {
- rPDUOutletPhaseIndex INTEGER,
- rPDUOutletPhaseOverloadRestriction INTEGER
- }
-
-rPDUOutletPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER {
- phase1 (1),
- phase2 (2),
- phase3 (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Switched Rack PDU phase entry."
- ::= { rPDUOutletPhaseEntry 1 }
-
-rPDUOutletPhaseOverloadRestriction OBJECT-TYPE
- SYNTAX INTEGER {
- alwaysAllowTurnON (1),
- restrictOnNearOverload (2),
- restrictOnOverload (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID controls the behavior of a Switched Rack PDU
- phase when an overload condition is possible and
- additional outlets are requested to be turned on.
-
- Setting this OID to alwaysAllowTurnON (1) will always allow
- the outlets on the corresponding phase to turn on.
-
- Setting this OID to restrictOnNearOverload (2) will not allow
- outlets on the corresponding phase to turn on if the
- rPDULoadConfigNearOverloadThreshold OID is exceeded.
-
- Setting this OID to restrictOnOverload (3) will not allow
- outlets on the corresponding phase to turn on if the
- rPDULoadConfigOverloadThreshold OID is exceeded."
- ::= { rPDUOutletPhaseEntry 2 }
-
-
--- the rPDUOutletControl group
-
-rPDUOutletControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF RPDUOutletControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of the individual outlets.
- The number of entries is contained in the
- rPDUOutletDevNumCntrlOutlets OID."
- ::= { rPDUOutletControl 1 }
-
-rPDUOutletControlEntry OBJECT-TYPE
- SYNTAX RPDUOutletControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlet to control."
- INDEX { rPDUOutletControlIndex}
- ::= { rPDUOutletControlTable 1 }
-
-RPDUOutletControlEntry ::=
- SEQUENCE {
- rPDUOutletControlIndex INTEGER,
- rPDUOutletControlOutletName DisplayString,
- rPDUOutletControlOutletPhase INTEGER,
- rPDUOutletControlOutletCommand INTEGER,
- rPDUOutletControlOutletBank INTEGER
- }
-
-rPDUOutletControlIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { rPDUOutletControlEntry 1 }
-
-rPDUOutletControlOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is dependent on device.
- An error will be returned if the set request exceeds the max size.
- This OID is provided for informational purposes only."
- ::= { rPDUOutletControlEntry 2 }
-
-rPDUOutletControlOutletPhase OBJECT-TYPE
- SYNTAX INTEGER {
- phase1 (1),
- phase2 (2),
- phase3 (3),
- phase1-2 (4),
- phase2-3 (5),
- phase3-1 (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The phase/s associated with this outlet.
-
- For single phase devices, this object will always
- return phase1(1).
-
- For 3-phase devices, this object will return phase1 (1),
- phase2 (2), or phase3 (3) for outlets tied to a single
- phase. For outlets tied to two phases, this object will
- return phase1-2 (4) for phases 1 and 2, phase2-3 (5) for
- phases 2 and 3, and phase3-1 (6) for phases 3 and 1."
- ::= { rPDUOutletControlEntry 3 }
-
-rPDUOutletControlOutletCommand OBJECT-TYPE
- SYNTAX INTEGER {
- immediateOn (1),
- immediateOff (2),
- immediateReboot (3),
- delayedOn (4),
- delayedOff (5),
- delayedReboot (6),
- cancelPendingCommand (7),
- gracefulOff (8),
- gracefulReboot (9)
-
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the immediateOn (1) value will be returned.
- If the outlet is off, the immediateOff (2) value will be
- returned.
-
-
- Setting this variable to immediateOn (1) will immediately turn
- the outlet on.
-
- Setting this variable to immediateOff (2) will immediately turn
- the outlet off.
-
- Setting this variable to immediateReboot (3) will immediately
- reboot the outlet.
-
- Setting this variable to delayedOn (4) will turn the outlet on
- after the rPDUOutletConfigPowerOnTime OID time has elapsed.
-
- Setting this variable to delayedOff (5) will turn the outlet off
- after the rPDUOutletConfigPowerOffTime OID time has elapsed.
-
- Setting this variable to delayedReboot (6) will cause the
- Switched Rack PDU to perform a delayedOff command, wait the
- rPDUOutletConfigRebootDuration OID time, and then perform a
- delayedOn command.
-
- Setting this variable to cancelPendingCommand (7) will cause any
- pending command to this outlet to be canceled.
-
- Setting this variable to gracefulOff (8) will cause the
- Switched Rack PDU to shut the outlet off after it waits the
- servers graceful shutdown time and the outlets shutdown delay.
-
- Setting this variable to gracefulReboot (9) will cause the
- Switched Rack PDU to shut the outlet off after it waits the
- servers graceful shutdown time and the outlets shutdown delay.
- Once the outlet is off, it will wait until the UPS reaches the
- configured minimum return battery capacity, then the outlets
- return delay before it turns the outlet back on."
-
- ::= { rPDUOutletControlEntry 4 }
-
-rPDUOutletControlOutletBank OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The bank associated with this outlet."
- ::= { rPDUOutletControlEntry 5 }
-
-
--- the rPDUOutletConfig group
-
-rPDUOutletConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF RPDUOutletConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the rPDUOutletDevNumCntrlOutlets OID."
- ::= { rPDUOutletConfig 1 }
-
-rPDUOutletConfigEntry OBJECT-TYPE
- SYNTAX RPDUOutletConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlet to configure."
- INDEX { rPDUOutletConfigIndex}
- ::= { rPDUOutletConfigTable 1 }
-
-RPDUOutletConfigEntry ::=
- SEQUENCE {
- rPDUOutletConfigIndex INTEGER,
- rPDUOutletConfigOutletName DisplayString,
- rPDUOutletConfigOutletPhase INTEGER,
- rPDUOutletConfigPowerOnTime INTEGER,
- rPDUOutletConfigPowerOffTime INTEGER,
- rPDUOutletConfigRebootDuration INTEGER,
- rPDUOutletConfigOutletBank INTEGER
- }
-
-rPDUOutletConfigIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { rPDUOutletConfigEntry 1 }
-
-rPDUOutletConfigOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is dependent on device.
- An error will be returned if the set request exceeds the max size."
- ::= { rPDUOutletConfigEntry 2 }
-
-rPDUOutletConfigOutletPhase OBJECT-TYPE
- SYNTAX INTEGER {
- phase1 (1),
- phase2 (2),
- phase3 (3),
- phase1-2 (4),
- phase2-3 (5),
- phase3-1 (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The phase/s associated with this outlet.
-
- For single phase devices, this object will always
- return phase1(1).
-
- For 3-phase devices, this object will return phase1 (1),
- phase2 (2), or phase3 (3) for outlets tied to a single
- phase. For outlets tied to two phases, this object will
- return phase1-2 (4) for phases 1 and 2, phase2-3 (5) for
- phases 2 and 3, and phase3-1 (6) for phases 3 and 1."
- ::= { rPDUOutletConfigEntry 3 }
-
-rPDUOutletConfigPowerOnTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet will delay
- powering on at coldstart or when a command that requires
- a turn-on delay is issued.
-
- Allowed values are:
-
- -1 - never power on.
- 0 - power on immediately.
- 1 to 300 - power on up to 300 seconds (5 minutes) after being
- commanded."
- ::= { rPDUOutletConfigEntry 4 }
-
-rPDUOutletConfigPowerOffTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The amount of time (in seconds) the outlet will delay
- powering off when a command that requires
- a turn-off delay is issued.
-
- Allowed values are:
-
- -1 - never power off.
- 0 - power off immediately.
- 1 to 300 - power off up to 300 seconds (5 minutes) after being
- commanded."
- ::= { rPDUOutletConfigEntry 5 }
-
-rPDUOutletConfigRebootDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "During a reboot sequence, power is turned off and then
- back on. This OID defines the amount of time to wait,
- in seconds, after turning the power off, at the start
- of the sequence, before turning power back on, at the
- end of the reboot sequence.
-
- Allowed range is any value between 5 and 60 seconds (1 minute)."
- ::= { rPDUOutletConfigEntry 6 }
-
-rPDUOutletConfigOutletBank OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The bank associated with this outlet."
- ::= { rPDUOutletConfigEntry 7 }
-
-
--- the rPDUOutletStatus group
-
-rPDUOutletStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF RPDUOutletStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting of status of individual outlets. The number of
- entries is contained in the rPDUOutletDevNumCntrlOutlets OID."
- ::= { rPDUOutletStatus 1 }
-
-rPDUOutletStatusEntry OBJECT-TYPE
- SYNTAX RPDUOutletStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlet to gather status from."
- INDEX { rPDUOutletStatusIndex}
- ::= { rPDUOutletStatusTable 1 }
-
-RPDUOutletStatusEntry ::=
- SEQUENCE {
- rPDUOutletStatusIndex INTEGER,
- rPDUOutletStatusOutletName DisplayString,
- rPDUOutletStatusOutletPhase INTEGER,
- rPDUOutletStatusOutletState INTEGER,
- rPDUOutletStatusCommandPending INTEGER,
- rPDUOutletStatusOutletBank INTEGER
- }
-
-rPDUOutletStatusIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { rPDUOutletStatusEntry 1 }
-
-rPDUOutletStatusOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet. Maximum size is dependent on device.
- An error will be returned if the set request exceeds the max size.
- This OID is provided for informational purposes only."
- ::= { rPDUOutletStatusEntry 2 }
-
-rPDUOutletStatusOutletPhase OBJECT-TYPE
- SYNTAX INTEGER {
- phase1 (1),
- phase2 (2),
- phase3 (3),
- phase1-2 (4),
- phase2-3 (5),
- phase3-1 (6)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The phase/s associated with this outlet.
-
- For single phase devices, this object will always
- return phase1(1).
-
- For 3-phase devices, this object will return phase1 (1),
- phase2 (2), or phase3 (3) for outlets tied to a single
- phase. For outlets tied to two phases, this object will
- return phase1-2 (4) for phases 1 and 2, phase2-3 (5) for
- phases 2 and 3, and phase3-1 (6) for phases 3 and 1."
- ::= { rPDUOutletStatusEntry 3 }
-
-rPDUOutletStatusOutletState OBJECT-TYPE
- SYNTAX INTEGER {
- outletStatusOn (1),
- outletStatusOff (2)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the outletStatusOn (1) value will be returned.
- If the outlet is off, the outletStatusOff (2) value will be
- returned. "
- ::= { rPDUOutletStatusEntry 4 }
-
-rPDUOutletStatusCommandPending OBJECT-TYPE
- SYNTAX INTEGER {
- outletStatusCommandPending (1),
- outletStatusNoCommandPending (2)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the command pending
- state of the outlet. If a command is pending on the
- outlet, the outletStatusCommandPending (1) value
- will be returned. If there is not a command pending
- on the outlet, the outletStatusNoCommandPending (2)
- will be returned."
- ::= { rPDUOutletStatusEntry 5 }
-
-rPDUOutletStatusOutletBank OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The bank associated with this outlet."
- ::= { rPDUOutletStatusEntry 6 }
-
-
--- the rPDUOutletBank group
-
-rPDUOutletBankTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletBankEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for management of outlets on a per bank basis."
- ::= { rPDUOutletBank 1 }
-
-rPDUOutletBankEntry OBJECT-TYPE
- SYNTAX OutletBankEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The bank to manage."
- INDEX { rPDUOutletBankIndex}
- ::= { rPDUOutletBankTable 1 }
-
-OutletBankEntry ::=
- SEQUENCE {
- rPDUOutletBankIndex INTEGER,
- rPDUOutletBankOverloadRestriction INTEGER
- }
-
-rPDUOutletBankIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the Switched Rack PDU bank entry."
- ::= { rPDUOutletBankEntry 1 }
-
-rPDUOutletBankOverloadRestriction OBJECT-TYPE
- SYNTAX INTEGER {
- alwaysAllowTurnON (1),
- restrictOnNearOverload (2),
- restrictOnOverload (3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID controls the behavior of a Switched Rack PDU
- bank when an overload condition is possible and
- additional outlets are requested to be turned on.
-
- Setting this OID to alwaysAllowTurnON (1) will always allow
- the outlets on the corresponding bank to turn on.
-
- Setting this OID to restrictOnNearOverload (2) will not allow
- outlets on the corresponding bank to turn on if the
- rPDULoadConfigNearOverloadThreshold OID is exceeded.
-
- Setting this OID to restrictOnOverload (3) will not allow
- outlets on the corresponding bank to turn on if the
- rPDULoadConfigOverloadThreshold OID is exceeded."
- ::= { rPDUOutletBankEntry 2 }
-
--- the rPDUPowerSupplyDevice group
-
-rPDUPowerSupply1Status OBJECT-TYPE
- SYNTAX INTEGER {
- powerSupply1Ok (1),
- powerSupply1Failed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return powerSupply1Ok(1) if power
- supply 1 is functioning normally. If not functioning normally,
- this OID will return powerSupply1Failed(2)."
- ::= { rPDUPowerSupplyDevice 1 }
-
-rPDUPowerSupply2Status OBJECT-TYPE
- SYNTAX INTEGER {
- powerSupply2Ok (1),
- powerSupply2Failed (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return powerSupply2Ok(1) if power
- supply 2 is functioning normally. If not functioning normally,
- this OID will return powerSupply2Failed(2)."
- ::= { rPDUPowerSupplyDevice 2 }
-
-
-
--- the dm3IdentSystem group
-
-dm3IdentSysDescriptionTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC description records."
- ::= { dm3IdentSystem 1 }
-
-dm3IdentSysDescriptionTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IdentSysDescriptionEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing description records of the powerplant. The number of
- entries is contained in the dm3IdentSysDescriptionTableSize OID."
- ::= { dm3IdentSystem 2 }
-
-dm3IdentSysDescriptionEntry OBJECT-TYPE
- SYNTAX IdentSysDescriptionEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The powerplant description record to reference."
- INDEX { dm3IdentSysDescriptionIndex }
- ::= { dm3IdentSysDescriptionTable 1 }
-
-IdentSysDescriptionEntry ::=
- SEQUENCE {
- dm3IdentSysDescriptionIndex INTEGER,
- dm3IdentSysDescriptionText DisplayString
- }
-
-dm3IdentSysDescriptionIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant description record."
- ::= { dm3IdentSysDescriptionEntry 1 }
-
-dm3IdentSysDescriptionText OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A 16 character text field describing the DC power plant device.
- This field can be configured from the dm3ConfigSysDescriptionText OID."
- ::= { dm3IdentSysDescriptionEntry 2 }
-
-dm3IdentSysModel OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Model type of the DC power plant."
- ::= { dm3IdentSystem 3 }
-
-dm3IdentSysCntrlRev OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Integer representation of the hardware revision of the Master Controller board."
- ::= { dm3IdentSystem 4 }
-
-dm3IdentSysFWVersion OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Integer representation of the power plant Master Controller firmware revision."
- ::= { dm3IdentSystem 5 }
-
--- the dm3ConfigSystem group
-
-dm3ConfigSysDescriptionTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC description records."
- ::= { dm3ConfigSystem 1 }
-
-dm3ConfigSysDescriptionTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigSysDescriptionEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing description records of the powerplant. The number of
- entries is contained in the dm3ConfigSysDescriptionTableSize OID."
- ::= { dm3ConfigSystem 2 }
-
-dm3ConfigSysDescriptionEntry OBJECT-TYPE
- SYNTAX ConfigSysDescriptionEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The powerplant description record to reference."
- INDEX { dm3ConfigSysDescriptionIndex }
- ::= { dm3ConfigSysDescriptionTable 1 }
-
-ConfigSysDescriptionEntry ::=
- SEQUENCE {
- dm3ConfigSysDescriptionIndex INTEGER,
- dm3ConfigSysDescriptionText DisplayString
- }
-
-dm3ConfigSysDescriptionIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant description record."
-
- ::= { dm3ConfigSysDescriptionEntry 1 }
-
-dm3ConfigSysDescriptionText OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "16 character text field describing the DC power plant device."
-
- ::= { dm3ConfigSysDescriptionEntry 2 }
-
-dm3ConfigSysHighTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Ambient high temperature threshold. Temperature sensor located on Master
- Controller board.
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
-
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigSystem 3 }
-
-dm3ConfigSysHighTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the System High Temperature Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
- ::= { dm3ConfigSystem 4 }
-
-dm3ConfigSysLowTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Ambient low temperature threshold. Temperature sensor located on Master
- Controller board.
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
-
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigSystem 5 }
-
-dm3ConfigSysLowTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the System Low Temperature Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
- ::= { dm3ConfigSystem 6 }
-
-dm3ConfigSysHardwareTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the System Hardware Temperature Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
- ::= { dm3ConfigSystem 7 }
-
-dm3ConfigSysRemoteAccess OBJECT-TYPE
- SYNTAX INTEGER {
- accessEnabled (1),
- accessDisabled (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "
- This OID is used to disable remote write access to the power plant.
- Setting this OID to accessEnabled (1) will have no affect.
- Setting this OID to accessDisabled (2) will disable the ability to
- remotely configure the DC powerplant.
-
- Once remote access is disabled, it can only be restored from the front
- panel of the DC power plant."
- ::= { dm3ConfigSystem 8 }
-
-
--- the dm3ConfigLVD group
-
-dm3ConfigLVDTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant LVDs controllable
- by this IP address."
- ::= { dm3ConfigLVD 1 }
-
-dm3ConfigLVDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the LVDs. The number of
- entries is contained in the dm3ConfigLVDTableSize OID."
- ::= { dm3ConfigLVD 2 }
-
-dm3ConfigLVDEntry OBJECT-TYPE
- SYNTAX ConfigLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The LVD to configure."
- INDEX { dm3ConfigLVDIndex }
- ::= { dm3ConfigLVDTable 1 }
-
-ConfigLVDEntry ::=
- SEQUENCE {
- dm3ConfigLVDIndex INTEGER,
- dm3ConfigLVDName DisplayString,
- dm3ConfigLVDEnable INTEGER,
- dm3ConfigLVDTripThresh INTEGER,
- dm3ConfigLVDResetThresh INTEGER,
- dm3ConfigLVDOpenAlarm INTEGER,
- dm3ConfigLVDHWAlarm INTEGER
- }
-
-dm3ConfigLVDIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant LVD."
- ::= { dm3ConfigLVDEntry 1 }
-
-dm3ConfigLVDName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the LVD. The maximum value is 16 characters."
- ::= { dm3ConfigLVDEntry 2 }
-
-dm3ConfigLVDEnable OBJECT-TYPE
- SYNTAX INTEGER {
- enabledYes (1),
- enabledNo (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID is used to control and indicate if the LVD is on or off.
- Setting this OID to enabledYes (1) will enable (turn on) the LVD.
- Setting this OID to enabledNo (2) will disable (turn off) the LVD."
- ::= { dm3ConfigLVDEntry 3 }
-
-dm3ConfigLVDTripThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "LVD Trip threshold. If voltage exceeds threshold, the LVD will trip.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigLVDEntry 4 }
-
-dm3ConfigLVDResetThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "LVD Reset threshold. If voltage exceeds threshold, the LVD will reset.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigLVDEntry 5 }
-
-dm3ConfigLVDOpenAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the LVD Open Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
- ::= { dm3ConfigLVDEntry 6 }
-
-dm3ConfigLVDHWAlarm OBJECT-TYPE
-SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the LVD Hardware Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
- ::= { dm3ConfigLVDEntry 7 }
-
-
--- the dm3ConfigBattery group
-
-dm3ConfigBattFloatVolt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery Float Voltage. This setting controls the power plant voltage.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 1 }
-
-dm3ConfigBattMaxRecharge OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery Maximum Recharge Rate. This setting controls the battery max
- recharge rate. The value is based on C/20 for 240 AHr battery string.
-
- Values are represented in thousandths of Amps (mA).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 2 }
-
-dm3ConfigBattDischargeThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery discharge threshold. If battery output current exceeds threshold
- a battery discharge alarm will occur.
-
- Values are represented in thousandths of Amps (mA).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 3 }
-
-dm3ConfigBattDischargeAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery Discharge Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 4 }
-
-dm3ConfigBattHighVoltThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery high voltage threshold. If system battery voltage exceeds threshold
- a battery high voltage alarm will occur.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 5 }
-
-dm3ConfigBattHighVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery High Voltage Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 6 }
-
-dm3ConfigBattLowVoltThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery low voltage threshold. If system battery voltage is under threshold
- a battery low voltage alarm will occur.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 7 }
-
-dm3ConfigBattLowVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery Low Voltage Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 8 }
-
-dm3ConfigBattHighTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery high temperature threshold. If system battery temperature exceeds threshold
- a battery high temperature alarm will occur.
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
-
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
-
- ::= { dm3ConfigBattery 9 }
-
-dm3ConfigBattHighTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery High Temperature Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 10 }
-
-dm3ConfigBattLowTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery low temperature threshold. If system battery temperature is under threshold
- a battery low temperature alarm will occur.
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit).
-
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
-
- ::= { dm3ConfigBattery 11 }
-
-dm3ConfigBattLowTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery Low Temperature Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 12 }
-
-dm3ConfigBattAmpHour OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery Amp-Hour Size. Units are thousandths of Amp hours (mAHr).
-
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 13 }
-
-dm3ConfigCompMethod OBJECT-TYPE
- SYNTAX INTEGER {
- tempcompOn (1),
- tempcompOff (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID is used to configure and get the state of the battery
- temperature compensation.
-
- Setting this OID to tempcompOn (1) will enable/turn on the battery temperature compensation.
- Setting this OID to tempcompOff (2) will disable/turn off the battery temperature compensation."
- ::= { dm3ConfigBattery 14 }
-
-dm3ConfigCompTempCoeff OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Compensation Temperature Coefficient. (uV/degC/cell).
-
- Units are presented in microvolts.
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 15 }
-
-dm3ConfigHighKneeTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "High Knee for temperature compensation: Compensation temperature coefficient
- becomes 0mV/degC/cell.
-
- Values are represented in thousandths of degrees Celcius.
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 16 }
-
-dm3ConfigLowKneeTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Low Knee for temperature compensation: Compensation temperature coefficient
- becomes 0mV/degC/cell.
-
- Values are represented in thousandths of degrees Celcius.
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigBattery 17 }
-
-dm3ConfigBattHwCurrentAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery Current Hardware Alarm (indicating current is outside realistic
- limits, or a possible measurement fault;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 18 }
-
-dm3ConfigBattHwTempAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Battery Temperature Hardware Alarm (indicating temperature is outside realistic
- limits, or a possible measurement fault;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBattery 19 }
-
-
--- the dm3ConfigRectThresh group
-dm3ConfigRectHighVoltThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Rectifier high voltage threshold. If rectifier voltage exceeds threshold
- a rectifier high voltage alarm will occur.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigRectThresh 1 }
-
-
-dm3ConfigRectLowVoltThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Rectifier low voltage threshold. If rectifier voltage is under threshold
- a rectifier low voltage alarm will occur.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigRectThresh 2 }
-
-dm3ConfigRectFailSafe OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Rectifier Fail Safe point. This OID represents the value sent to rectifier controllers
- to use in the event of communications loss with the Master Controller or Master Controller
- board failure.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigRectThresh 3 }
-
-dm3ConfigRectFailComm OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Rectifier Communication Fail timeout. This OID represents the time interval in which there is no
- communication between the rectifier and the master controller at which the rectifier will reset
- all its values to default.
-
- Values are represented in hundredths of Seconds.
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigRectThresh 4 }
-
--- the dm3ConfigRectAlarms group
-
-dm3ConfigRectHighVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier High Voltage Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 1 }
-
-dm3ConfigRectLowVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Low Voltage Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 2 }
-
-dm3ConfigRectConfigAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This alarm is activated when a new rectifier is detected;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 3 }
-
-dm3ConfigRect1ofNAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This setting indicates the action if ONE rectifier of a N+1 system has failed;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 4 }
-
-dm3ConfigRect2ofNAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This setting indicates the action if TWO OR MORE rectifiers of a N+1 system have failed;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 5 }
-
-dm3ConfigRectDiagAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Controller Diagnostics Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
- to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
-
- ::= { dm3ConfigRectAlarms 6 }
-
-dm3ConfigRectImbalanceAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Imbalance Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 7 }
-
-dm3ConfigRectCurrLimitAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Current Limit Alarm (indicating rectifier in the Current Limit state);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
- to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
-
- ::= { dm3ConfigRectAlarms 8 }
-
-dm3ConfigRectStandbyAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Standby Alarm (indicating output DC has been turned off);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
- to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
-
- ::= { dm3ConfigRectAlarms 9 }
-
-dm3ConfigRectFanFailAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Fan Fail Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
- to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
-
- ::= { dm3ConfigRectAlarms 10 }
-
-dm3ConfigRectFailAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Fail Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
- to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."
-
- ::= { dm3ConfigRectAlarms 11 }
-
-dm3ConfigRectHwVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Rectifier Hardware Voltage Alarm (indicating voltage outside realistic limits,
- or a possible measurement fault);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigRectAlarms 12 }
-
-
--- the dm3ConfigConvThresh group
-
-dm3ConfigConvHighVoltThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter high voltage threshold. If converter voltage exceeds threshold
- a converter high voltage alarm will occur.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
-
- ::= { dm3ConfigConvThresh 1 }
-
-dm3ConfigConvLowVoltThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter low voltage threshold. If converter voltage exceeds threshold
- a converter low voltage alarm will occur.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigConvThresh 2 }
-
-dm3ConfigConvFailSafe OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter Fail Safe point. This OID represents the value sent to converter controllers
- to use in the event of communications loss with the Master Controller or Master Controller
- board failure.
-
- Values are represented in thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigConvThresh 3 }
-
-dm3ConfigConvSetPoint OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter Set point. This OID represents the initial set point used in the
- voltage control loop.
-
- Units are thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigConvThresh 4 }
-
-dm3ConfigConvFailMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter Fail Maximum limit. This OID represents the value sent to the converter
- controllers to define the maximum set point allowed.
-
- Units are thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigConvThresh 5 }
-
-dm3ConfigConvFailMin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter Fail Minimum limit. This OID represents the value sent to the converter
- controllers to define the minimum set point allowed.
-
- Units are thousandths of Volts (mV).
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigConvThresh 6 }
-
-dm3ConfigConvFailComm OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Converter Communication Fail timeout. This OID represents the time interval in which there is no
- communication between the converter and the master controller at which the converter will reset
- all its values to default.
-
- Values are represented in hundredths of Seconds.
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigConvThresh 7 }
-
--- the dm3ConfigConvAlarms group
-dm3ConfigConvHighVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter High Voltage Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigConvAlarms 1 }
-
-dm3ConfigConvLowVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Low Voltage Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigConvAlarms 2 }
-
-dm3ConfigConvConfigAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Configuration Alarm (indicating a new converter has been detected);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigConvAlarms 3 }
-
-dm3ConfigConv1ofNAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter 1ofN Alarm (indicating action if ONE converter of a N+1 system has failed);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigConvAlarms 4 }
-
-dm3ConfigConv2ofNAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter 2ofN Alarm (indicating action if TWO OR MORE converters of a N+1 system has failed);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigConvAlarms 5 }
-
-dm3ConfigConvDiagAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Diagnostics Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 6 }
-
-dm3ConfigConvImbalanceAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Imbalance Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 7 }
-
-dm3ConfigConvCurrLimitAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Current Limit Alarm (indicating the converter is in the Current Limit state);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 8 }
-
-dm3ConfigConvStandbyAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Standby Alarm (indicating the converter is in the Standby state);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 9 }
-
-dm3ConfigConvFanFailAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Fan Fail Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 10 }
-
-dm3ConfigConvFailAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Fail Alarm;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 11 }
-
-dm3ConfigConvHwVoltAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9),
- alarmNofN (10)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "For the Converter Voltage Alarm (indicating voltage outside realistic limits, or a
- possible measurement fault);
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
- Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigConv1ofNAlarm OID
- to be activated if ONE converter fails in an N+1 system. It causes the alarm specified in the
- dm3ConfigConv2ofNAlarm OID to be activated if TWO OR MORE converters fail in an N+1 system."
-
- ::= { dm3ConfigConvAlarms 12 }
-
-
--- the dm3ConfigOutputRelays group
-
-dm3ConfigOutRlyTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant Output Relays controllable
- by this IP address."
- ::= { dm3ConfigOutputRelays 1 }
-
-dm3ConfigOutRlyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigOutRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the Output Relays. The number of
- entries is contained in the dm3ConfigOutRlyTableSize OID."
- ::= { dm3ConfigOutputRelays 2 }
-
-dm3ConfigOutRlyEntry OBJECT-TYPE
- SYNTAX ConfigOutRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The output relay to configure."
- INDEX { dm3ConfigOutRlyIndex }
- ::= { dm3ConfigOutRlyTable 1 }
-
-ConfigOutRlyEntry ::=
- SEQUENCE {
- dm3ConfigOutRlyIndex INTEGER,
- dm3ConfigOutRlyName DisplayString,
- dm3ConfigOutRlyDelay INTEGER,
- dm3ConfigOutRlyAlarm INTEGER
- }
-
-dm3ConfigOutRlyIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant output relay."
- ::= { dm3ConfigOutRlyEntry 1 }
-
-dm3ConfigOutRlyName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the output relay. The maximum value is 16 characters."
- ::= { dm3ConfigOutRlyEntry 2 }
-
-dm3ConfigOutRlyDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Output Relay Delay. This OID represents the time delay from the initiation of an
- output relay action to when the output relay action does occur. If the alarm condition
- disappears before the end of the delay, no action will occur. Delay for Major
- and Minor alarms is not configurable and is always set to 0.
-
- Values are represented in hundredths of seconds.
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigOutRlyEntry 3 }
-
-dm3ConfigOutRlyAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Output Relay Alarm. This setting indicates what action to perform in the event of
- an output relay alarm condition;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition.
-
- Relay Alarm for Major and Minor alarms is not configurable and is always set to
- alarmMajor and alarmMinor respectively."
-
- ::= { dm3ConfigOutRlyEntry 4 }
-
-
--- the dm3ConfigInputRelays group
-
-dm3ConfigInRlyTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant Input Relays controllable
- by this IP address."
- ::= { dm3ConfigInputRelays 1 }
-
-dm3ConfigInRlyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigInRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the Input Relays. The number of
- entries is contained in the dm3ConfigInRlyTableSize OID."
- ::= { dm3ConfigInputRelays 2 }
-
-dm3ConfigInRlyEntry OBJECT-TYPE
- SYNTAX ConfigInRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The input relay to configure."
- INDEX { dm3ConfigInRlyIndex }
- ::= { dm3ConfigInRlyTable 1 }
-
-ConfigInRlyEntry ::=
- SEQUENCE {
- dm3ConfigInRlyIndex INTEGER,
- dm3ConfigInRlyName DisplayString,
- dm3ConfigInRlyDelay INTEGER,
- dm3ConfigInRlyAlarm INTEGER
- }
-
-dm3ConfigInRlyIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant input relay."
- ::= { dm3ConfigInRlyEntry 1 }
-
-dm3ConfigInRlyName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the input relay. The maximum value is 16 characters."
-
- ::= { dm3ConfigInRlyEntry 2 }
-
-dm3ConfigInRlyDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Input Relay Delay. This OID represents the time delay from the initiation of an
- input relay action to when the input relay action does occur. If the alarm condition
- disappears before the end of the delay, no action will occur.
-
- Values are represented in hundredths of seconds.
-
- Attempts to set the value above or below the acceptable range of the powerplant
- will cause the value to be set at the high or low point of the range respectively."
- ::= { dm3ConfigInRlyEntry 3 }
-
-dm3ConfigInRlyAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Input Relay Alarm. This setting indicates what action to perform in the event of
- an input relay alarm condition;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigInRlyEntry 4 }
-
--- the dm3ConfigBreakers group
-
-dm3ConfigBreakersTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant circuit breakers controllable
- by this IP address."
- ::= { dm3ConfigBreakers 1 }
-
-dm3ConfigBreakersTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigBreakersEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the circuit breakers. The number of
- entries is contained in the dm3ConfigBreakersTableSize OID."
- ::= { dm3ConfigBreakers 2 }
-
-dm3ConfigBreakersEntry OBJECT-TYPE
- SYNTAX ConfigBreakersEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The circuit breaker to configure."
- INDEX { dm3ConfigBreakersIndex }
- ::= { dm3ConfigBreakersTable 1 }
-
-ConfigBreakersEntry ::=
- SEQUENCE {
- dm3ConfigBreakersIndex INTEGER,
- dm3ConfigBreakersName DisplayString,
- dm3ConfigBreakersAlarm INTEGER
- }
-
-dm3ConfigBreakersIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant circuit breaker."
- ::= { dm3ConfigBreakersEntry 1 }
-
-dm3ConfigBreakersName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the circuit breaker. The maximum value is 16 characters."
- ::= { dm3ConfigBreakersEntry 2 }
-
-dm3ConfigBreakersAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Circuit Breaker Alarm. This setting indicates what action to perform in the event of
- a circuit breaker alarm condition;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigBreakersEntry 3 }
-
--- the dm3ConfigFuses group
-
-dm3ConfigFusesTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant Fuses controllable
- by this IP address."
- ::= { dm3ConfigFuses 1 }
-
-dm3ConfigFusesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigFusesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the Fuses. The number of
- entries is contained in the dm3ConfigFusesTableSize OID."
- ::= { dm3ConfigFuses 2 }
-
-dm3ConfigFusesEntry OBJECT-TYPE
- SYNTAX ConfigFusesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The fuse to configure."
- INDEX { dm3ConfigFusesIndex }
- ::= { dm3ConfigFusesTable 1 }
-
-ConfigFusesEntry ::=
- SEQUENCE {
- dm3ConfigFusesIndex INTEGER,
- dm3ConfigFusesName DisplayString,
- dm3ConfigFusesAlarm INTEGER
- }
-
-dm3ConfigFusesIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant fuse."
- ::= { dm3ConfigFusesEntry 1 }
-
-dm3ConfigFusesName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the fuse. The maximum value is 16 characters."
- ::= { dm3ConfigFusesEntry 2 }
-
-dm3ConfigFusesAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- alarmIgnore (1),
- alarmRelay1 (2),
- alarmRelay2 (3),
- alarmRelay3 (4),
- alarmRelay4 (5),
- alarmRelay5 (6),
- alarmRelay6 (7),
- alarmMinor (8),
- alarmMajor (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Fuses Alarm. This setting indicates what action to perform in the event of
- a Fuse alarm condition;
- Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
- Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
- alarm condition.
- Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
- alarm condition.
- Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
- alarm condition.
- Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
- alarm condition."
-
- ::= { dm3ConfigFusesEntry 3 }
-
--- the dm3StatusSystem group
-
-dm3StatusSystemTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System temperature based on sensor on Master Controller PCB.
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit)."
-
- ::= { dm3StatusSystem 1 }
-
-dm3StatusSystemStart OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Time stamp at DC powerplant initialization.
- The time is represented as MMM,DD,YYYY,HH:MM:SS."
- ::= { dm3StatusSystem 2 }
-
-dm3StatusSysRemoteAccess OBJECT-TYPE
- SYNTAX INTEGER {
- accessEnabled (1),
- accessDisabled (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Remote Access indicator
- This setting indicates if configuration (write) access to the powerplant is enabled or
- disabled at the powerplant level.
- This value will be accessEnabled (1) if remote configuration is enabled, and
- accessDisabled (2) if remote configuration is disabled."
- ::= { dm3StatusSystem 3 }
-
-dm3StatusSysSecurityLevel OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable shows the current active security access level of controller. This
- can only be changed directly from the front panel."
- ::= { dm3StatusSystem 4 }
-
-dm3StatusSysTempSanity OBJECT-TYPE
- SYNTAX INTEGER{
- saneYES (1),
- saneNO (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System temperature sanity indicator. Indicates if the system temperature is
- reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
- indicates temperature is reasonable, a value of saneNo (2) indicates it is not."
- ::= { dm3StatusSystem 5 }
-
-dm3StatusSysAlarmState OBJECT-TYPE
- SYNTAX INTEGER{
- alarmMinor (1),
- alarmMajor (2),
- alarmBoth (3),
- alarmNone (4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System Alarm State. Reflects the alarm status of the overall DC system.
- If a minor alarm is present, the value will be alarmMinor(1).
- If a major alarm is present, the value will be alarmMajor(2).
- If both minor and a major alarm is present, the value will be alarmBoth(3).
- If no alarm is present, the value will be alarmNone(4)."
- ::= { dm3StatusSystem 6 }
-
-dm3StatusSysTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- in the DC system, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { dm3StatusSystem 7 }
-
-
--- the dm3StatusAlarms group
-
-dm3StatusAlarmsTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant alarms viewable
- by this IP address."
- ::= { dm3StatusAlarms 1 }
-
-dm3StatusAlarmsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusAlarmsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing system alarms. The number of
- entries is contained in the dm3StatusAlarmsTableSize OID."
- ::= { dm3StatusAlarms 2 }
-
-dm3StatusAlarmsEntry OBJECT-TYPE
- SYNTAX StatusAlarmsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The alarm to display."
- INDEX { dm3StatusAlarmsIndex }
- ::= { dm3StatusAlarmsTable 1 }
-
-StatusAlarmsEntry ::=
- SEQUENCE {
- dm3StatusAlarmsIndex INTEGER,
- dm3StatusAlarmsText DisplayString
- }
-
-dm3StatusAlarmsIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the system alarm."
- ::= { dm3StatusAlarmsEntry 1 }
-
-dm3StatusAlarmsText OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The 16 character text describing the active alarm condition."
- ::= { dm3StatusAlarmsEntry 2 }
-
--- the dm3StatusBattery group
-
-dm3StatusBattCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery Current: This OID shows the battery current in thousandths of Amps (mA)."
- ::= { dm3StatusBattery 1 }
-
-dm3StatusBattTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery Temperature:
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dm3StatusSysTempUnits' OID (Celsius or Fahrenheit)."
-
- ::= { dm3StatusBattery 2 }
-
-dm3StatusBattCurrentSanity OBJECT-TYPE
- SYNTAX INTEGER{
- saneYES (1),
- saneNO (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery current sanity indicator. Indicates if the battery current is
- reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
- indicates current is reasonable, a value of saneNo (2) indicates it is not."
- ::= { dm3StatusBattery 3 }
-
-dm3StatusBattTempSanity OBJECT-TYPE
- SYNTAX INTEGER{
- saneYES (1),
- saneNO (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery temperature sanity indicator. Indicates if the battery temperature is
- reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
- indicates temperature is reasonable, a value of saneNo (2) indicates it is not."
- ::= { dm3StatusBattery 4 }
-
--- the dm3StatusOEM group
-
-dm3StatusOEMrectOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier offset value in thousandths of Volts (mV)."
- ::= { dm3StatusOEM 1 }
-
-dm3StatusOEMrectGain OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier gain value in thousandths of Volts (mV/V)."
- ::= { dm3StatusOEM 2 }
-
-dm3StatusOEMconvOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter offset value in thousandths of Volts (mV)."
- ::= { dm3StatusOEM 3 }
-
-dm3StatusOEMconvGain OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter gain value in thousandths of Volts (mV/V)."
- ::= { dm3StatusOEM 4 }
-
-dm3StatusOEMshuntOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the shunt offset value in thousandths of Amps (mA)."
- ::= { dm3StatusOEM 5 }
-
-dm3StatusOEMshuntGain OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the shunt gain value in thousandths of Amps (mA/A)."
- ::= { dm3StatusOEM 6 }
-
--- the dm3StatusLVD group
-
-dm3StatusLVDTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant LVDs viewable
- by this IP address."
- ::= { dm3StatusLVD 1 }
-
-dm3StatusLVDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the LVDs. The number of
- entries is contained in the dm3StatusLVDTableSize OID."
- ::= { dm3StatusLVD 2 }
-
-dm3StatusLVDEntry OBJECT-TYPE
- SYNTAX StatusLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The LVD to gather status from."
- INDEX { dm3StatusLVDIndex }
- ::= { dm3StatusLVDTable 1 }
-
-StatusLVDEntry ::=
- SEQUENCE {
- dm3StatusLVDIndex INTEGER,
- dm3StatusLVDName DisplayString,
- dm3StatusLVDState INTEGER,
- dm3StatusLVDHwFault INTEGER
- }
-
-dm3StatusLVDIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant LVD."
- ::= { dm3StatusLVDEntry 1 }
-
-dm3StatusLVDName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the LVD. The maximum size is
- 16 characters. The name is set by using the
- dm3ConfigLVDName OID.
- This OID is provided for informational purposes only."
- ::= { dm3StatusLVDEntry 2 }
-
-dm3StatusLVDState OBJECT-TYPE
- SYNTAX INTEGER {
- statusClosed (1),
- statusOpened (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusClosed (1) if the LVD is closed.
- statusOpened (2) will be returned if the LVD is opened."
- ::= { dm3StatusLVDEntry 3 }
-
-dm3StatusLVDHwFault OBJECT-TYPE
- SYNTAX INTEGER {
- statusFault (1),
- statusNofault (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusFault (1) if the LVD is faulted.
- statusNofault (2) will be returned if the LVD is not faulted."
- ::= { dm3StatusLVDEntry 4 }
-
--- the dm3StatusRectifier group
-
-dm3StatusRectTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant rectifiers viewable
- by this IP address."
- ::= { dm3StatusRectifier 1 }
-
-dm3StatusRectTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusRectEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the rectifiers. The number of
- entries is contained in the dm3StatusRectTableSize OID."
- ::= { dm3StatusRectifier 2 }
-
-dm3StatusRectEntry OBJECT-TYPE
- SYNTAX StatusRectEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The rectifier to gather status from."
- INDEX { dm3StatusRectIndex }
- ::= { dm3StatusRectTable 1 }
-
-StatusRectEntry ::=
- SEQUENCE {
- dm3StatusRectIndex INTEGER,
- dm3StatusRectID INTEGER,
- dm3StatusRectDesc DisplayString,
- dm3StatusRectCurrent INTEGER,
- dm3StatusRectCurrentLimit INTEGER,
- dm3StatusRectStandby INTEGER,
- dm3StatusRectFanFail INTEGER,
- dm3StatusRectFail INTEGER,
- dm3StatusRectDevType INTEGER,
- dm3StatusRectPhyAddr INTEGER,
- dm3StatusRectCfg INTEGER,
- dm3StatusRectPcbRev INTEGER,
- dm3StatusRectFwVer INTEGER,
- dm3StatusRectPresent INTEGER,
- dm3StatusRectDiagPass INTEGER,
- dm3StatusRectState INTEGER
- }
-
-dm3StatusRectIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant rectifier."
- ::= { dm3StatusRectEntry 1 }
-
-dm3StatusRectID OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier ID. This enumerates the number of the rectifier within
- a group of rectifiers."
- ::= { dm3StatusRectEntry 2 }
-
-dm3StatusRectDesc OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the 16-character rectifier description."
- ::= { dm3StatusRectEntry 3 }
-
-dm3StatusRectCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier current in thousandths of Amps (mA)."
- ::= { dm3StatusRectEntry 4 }
-
-dm3StatusRectCurrentLimit OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier is in the Current Limit state.
- statusFalse (2) will be returned if the rectifier is not in the Current Limit state."
- ::= { dm3StatusRectEntry 5 }
-
-dm3StatusRectStandby OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier is in the Standby state.
- statusFalse (2) will be returned if the rectifier is not in the Standby state."
- ::= { dm3StatusRectEntry 6 }
-
-dm3StatusRectFanFail OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier Fan has failed.
- statusFalse (2) will be returned if the rectifier Fan has not failed."
- ::= { dm3StatusRectEntry 7 }
-
-dm3StatusRectFail OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier has failed.
- statusFalse (2) will be returned if the rectifier has not failed."
- ::= { dm3StatusRectEntry 8 }
-
-dm3StatusRectDevType OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier device type."
- ::= { dm3StatusRectEntry 9 }
-
-dm3StatusRectPhyAddr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier physical address (the address on the bus)."
- ::= { dm3StatusRectEntry 10 }
-
-dm3StatusRectCfg OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier is present after
- power-up or set-configuration.
- statusFalse (2) will be returned if the rectifier is not configured."
- ::= { dm3StatusRectEntry 11 }
-
-dm3StatusRectPcbRev OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier device PCB serial number."
- ::= { dm3StatusRectEntry 12 }
-
-dm3StatusRectFwVer OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier device firmware revision."
- ::= { dm3StatusRectEntry 13 }
-
-dm3StatusRectPresent OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier is present.
- statusFalse (2) will be returned if the rectifier is not present."
- ::= { dm3StatusRectEntry 14 }
-
-dm3StatusRectDiagPass OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier diagnostics have passed.
- statusFalse (2) will be returned if the rectifier diagnostics have not passed."
- ::= { dm3StatusRectEntry 15 }
-
-dm3StatusRectState OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier device state as defined by the device status register."
- ::= { dm3StatusRectEntry 16 }
-
-dm3StatusSysRectVoltSanity OBJECT-TYPE
- SYNTAX INTEGER {
- saneYES (1),
- saneNO (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Rectifier voltage sanity indicator. Indicates if the rectifier voltage is
- reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
- indicates voltage is reasonable, a value of saneNo (2) indicates it is not."
- ::= { dm3StatusRectifier 3 }
-
-dm3StatusSysRectAvailable OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier is available.
- statusFalse (2) will be returned if the rectifier is not available."
- ::= { dm3StatusRectifier 4 }
-
-dm3StatusSysRectType OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the type of rectifier the system has. There can only be a single type of
- rectifier in the power plant"
- ::= { dm3StatusRectifier 5 }
-
-dm3StatusSysRectVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the system level rectifier voltage in thousandths of Volts (mV)."
- ::= { dm3StatusRectifier 6 }
-
-dm3StatusSysRectCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the system level rectifier current in thousandths of Amps (mA)."
- ::= { dm3StatusRectifier 7 }
-
-
--- the dm3StatusConverter group
-
-dm3StatusConvTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant converters viewable
- by this IP address."
- ::= { dm3StatusConverter 1 }
-
-dm3StatusConvTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusConvEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for viewing status of the converters. The number of
- entries is contained in the dm3StatusConvTableSize OID."
- ::= { dm3StatusConverter 2 }
-
-dm3StatusConvEntry OBJECT-TYPE
- SYNTAX StatusConvEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The converter to gather status from."
- INDEX { dm3StatusConvIndex }
- ::= { dm3StatusConvTable 1 }
-
-StatusConvEntry ::=
- SEQUENCE {
- dm3StatusConvIndex INTEGER,
- dm3StatusConvID INTEGER,
- dm3StatusConvDesc DisplayString,
- dm3StatusConvCurrent INTEGER,
- dm3StatusConvCurrentLimit INTEGER,
- dm3StatusConvStandby INTEGER,
- dm3StatusConvFanFail INTEGER,
- dm3StatusConvFail INTEGER,
- dm3StatusConvDevType INTEGER,
- dm3StatusConvPhyAddr INTEGER,
- dm3StatusConvCfg INTEGER,
- dm3StatusConvPcbRev INTEGER,
- dm3StatusConvFwVer INTEGER,
- dm3StatusConvPresent INTEGER,
- dm3StatusConvDiagPass INTEGER,
- dm3StatusConvState INTEGER
- }
-
-dm3StatusConvIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant converter."
- ::= { dm3StatusConvEntry 1 }
-
-dm3StatusConvID OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter ID. This enumerates the number of the converter within
- a group of converters."
- ::= { dm3StatusConvEntry 2 }
-
-dm3StatusConvDesc OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the 16 character converter description."
- ::= { dm3StatusConvEntry 3 }
-
-dm3StatusConvCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter current in thousandths of Amps (mA)."
- ::= { dm3StatusConvEntry 4 }
-
-dm3StatusConvCurrentLimit OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter is in the Current Limit state.
- statusFalse (2) will be returned if the converter is not in the Current Limit state."
- ::= { dm3StatusConvEntry 5 }
-
-dm3StatusConvStandby OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter is in the Standby state.
- statusFalse (2) will be returned if the converter is not in the Standby state."
- ::= { dm3StatusConvEntry 6 }
-
-dm3StatusConvFanFail OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter Fan has failed.
- statusFalse (2) will be returned if the converter Fan has not failed."
- ::= { dm3StatusConvEntry 7 }
-
-dm3StatusConvFail OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter has failed.
- statusFalse (2) will be returned if the converter has not failed."
- ::= { dm3StatusConvEntry 8 }
-
-dm3StatusConvDevType OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter device type."
- ::= { dm3StatusConvEntry 9 }
-
-dm3StatusConvPhyAddr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter physical address (the address on the bus)."
- ::= { dm3StatusConvEntry 10 }
-
-dm3StatusConvCfg OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter is present after
- power-up or set-configuration.
- statusFalse (2) will be returned if the converter is not configured."
- ::= { dm3StatusConvEntry 11 }
-
-dm3StatusConvPcbRev OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter device PCB serial number."
- ::= { dm3StatusConvEntry 12 }
-
-dm3StatusConvFwVer OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter device firmware version."
- ::= { dm3StatusConvEntry 13 }
-
-dm3StatusConvPresent OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter is present.
- statusFalse (2) will be returned if the converter is not present."
- ::= { dm3StatusConvEntry 14 }
-
-dm3StatusConvDiagPass OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter diagnostics have passed.
- statusFalse (2) will be returned if the converter diagnostics have not passed."
- ::= { dm3StatusConvEntry 15 }
-
-dm3StatusConvState OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter state as defined by the device status register."
- ::= { dm3StatusConvEntry 16 }
-
-dm3StatusSysConvVoltSanity OBJECT-TYPE
- SYNTAX INTEGER{
- saneYES (1),
- saneNO (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Converter voltage sanity indicator. Indicates if the converter voltage is
- reasonable. Reasonable is defined based on powerplant type. A value of saneYes (1)
- indicates voltage is reasonable, a value of saneNo (2) indicates it is not."
- ::= { dm3StatusConverter 3 }
-
-dm3StatusSysConvAvailable OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the converter is available.
- statusFalse (2) will be returned if the converter is not available."
- ::= { dm3StatusConverter 4 }
-
-dm3StatusSysConvType OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the converter type."
- ::= { dm3StatusConverter 5 }
-
-dm3StatusSysConvVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the system level converter voltage in thousandths of volts (mV)."
- ::= { dm3StatusConverter 6 }
-
-dm3StatusSysConvCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the system level converter current in thousandths of Amps (mA)."
- ::= { dm3StatusConverter 7 }
-
--- the dm3StatusOutputRelays group
-
-dm3StatusOutRlyTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant output relays viewable
- by this IP address."
- ::= { dm3StatusOutputRelays 1 }
-
-dm3StatusOutRlyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusOutRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for viewing status of the output relays. The number of
- entries is contained in the dm3StatusOutRlyTableSize OID."
- ::= { dm3StatusOutputRelays 2 }
-
-dm3StatusOutRlyEntry OBJECT-TYPE
- SYNTAX StatusOutRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The output relay to gather status from."
- INDEX { dm3StatusOutRlyIndex }
- ::= { dm3StatusOutRlyTable 1 }
-
-StatusOutRlyEntry ::=
- SEQUENCE {
- dm3StatusOutRlyIndex INTEGER,
- dm3StatusOutRlyName DisplayString,
- dm3StatusOutRlyStatus INTEGER
- }
-
-dm3StatusOutRlyIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant output relay."
- ::= { dm3StatusOutRlyEntry 1 }
-
-dm3StatusOutRlyName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the output relay. The maximum size is
- 16 characters. The name is set by using the
- dm3ConfigOutRlyName OID.
- This OID is provided for informational purposes only."
- ::= { dm3StatusOutRlyEntry 2 }
-
-dm3StatusOutRlyStatus OBJECT-TYPE
- SYNTAX INTEGER {
- statusOn (1),
- statusOff (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusOn (1) if the output relay is enabled/on.
- statusOff (2) will be returned if the output relay is disabled/off."
- ::= { dm3StatusOutRlyEntry 3 }
-
-
--- the dm3StatusInputRelays group
-
-dm3StatusInRlyTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant input relays viewable
- by this IP address."
- ::= { dm3StatusInputRelays 1 }
-
-dm3StatusInRlyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusInRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for viewing status of the input relays. The number of
- entries is contained in the dm3StatusInRlyTableSize OID."
- ::= { dm3StatusInputRelays 2 }
-
-
-dm3StatusInRlyEntry OBJECT-TYPE
- SYNTAX StatusInRlyEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The input relays to gather status from."
- INDEX { dm3StatusInRlyIndex }
- ::= { dm3StatusInRlyTable 1 }
-
-StatusInRlyEntry ::=
- SEQUENCE {
- dm3StatusInRlyIndex INTEGER,
- dm3StatusInRlyName DisplayString,
- dm3StatusInRlyStatus INTEGER
- }
-
-dm3StatusInRlyIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant input relay."
- ::= { dm3StatusInRlyEntry 1 }
-
-dm3StatusInRlyName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the input relay. The maximum size is
- 16 characters. The name is set by using the
- dm3ConfigInRlyName OID.
- This OID is provided for informational purposes only."
- ::= { dm3StatusInRlyEntry 2 }
-
-dm3StatusInRlyStatus OBJECT-TYPE
- SYNTAX INTEGER {
- statusOn (1),
- statusOff (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusOn (1) if the input relay is enabled/on.
- statusOff (2) will be returned if the input relay is disabled/off."
- ::= { dm3StatusInRlyEntry 3 }
-
--- the dm3StatusBreakers group
-
-dm3StatusBreakersTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant circuit breakers viewable
- by this IP address."
- ::= { dm3StatusBreakers 1 }
-
-dm3StatusBreakersTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusBreakersEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for viewing status of the circuit breakers. The number of
- entries is contained in the dm3StatusBreakersTableSize OID."
- ::= { dm3StatusBreakers 2 }
-
-dm3StatusBreakersEntry OBJECT-TYPE
- SYNTAX StatusBreakersEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The circuit breaker to gather status from."
- INDEX { dm3StatusBreakersIndex }
- ::= { dm3StatusBreakersTable 1 }
-
-StatusBreakersEntry ::=
- SEQUENCE {
- dm3StatusBreakersIndex INTEGER,
- dm3StatusBreakersName DisplayString,
- dm3StatusBreakersStatus INTEGER
- }
-
-dm3StatusBreakersIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant circuit breaker."
- ::= { dm3StatusBreakersEntry 1 }
-
-dm3StatusBreakersName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the circuit breaker. The maximum size is
- 16 characters. The name is set by using the
- dm3ConfigBreakersName OID.
- This OID is provided for informational purposes only."
- ::= { dm3StatusBreakersEntry 2 }
-
-dm3StatusBreakersStatus OBJECT-TYPE
- SYNTAX INTEGER {
- statusClosed (1),
- statusOpen (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusClosed (1) if the circuit breaker is closed.
- statusOpen (2) will be returned if the circuit breaker is open."
- ::= { dm3StatusBreakersEntry 3 }
-
--- the dm3StatusFuses group
-
-dm3StatusFusesTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant fuses controllable
- by this IP address."
- ::= { dm3StatusFuses 1 }
-
-dm3StatusFusesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusFusesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for viewing status of the fuses. The number of
- entries is contained in the dm3StatusFusesTableSize OID."
- ::= { dm3StatusFuses 2 }
-
-dm3StatusFusesEntry OBJECT-TYPE
- SYNTAX StatusFusesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The fuse to gather status from."
- INDEX { dm3StatusFusesIndex }
- ::= { dm3StatusFusesTable 1 }
-
-StatusFusesEntry ::=
- SEQUENCE {
- dm3StatusFusesIndex INTEGER,
- dm3StatusFusesName DisplayString,
- dm3StatusFusesStatus INTEGER
- }
-
-dm3StatusFusesIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant fuse."
- ::= { dm3StatusFusesEntry 1 }
-
-dm3StatusFusesName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the fuse. The maximum size is
- 16 characters. The name is set by using the
- dm3ConfigFuseName OID.
- This OID is provided for informational purposes only."
- ::= { dm3StatusFusesEntry 2 }
-
-dm3StatusFusesStatus OBJECT-TYPE
- SYNTAX INTEGER {
- statusClosed (1),
- statusOpen (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusClosed (1) if the fuse is closed.
- statusOpen (2) will be returned if the fuse is open."
- ::= { dm3StatusFusesEntry 3 }
-
--- the atsIdent group
-
-atsIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware version of the Automatic Transfer Switch.
- This value is set at the factory."
- ::= { atsIdent 1 }
-
-atsIdentFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A string identifying the Automatic Transfer Switch
- firmware version."
- ::= { atsIdent 2 }
-
-atsIdentFirmwareDate OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date of release for this Automatic Transfer Switch
- firmware version. "
- ::= { atsIdent 3 }
-
-atsIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the Automatic Transfer Switch was manufactured in mm/dd/yyyy format.
- This value is set at the factory. "
- ::= { atsIdent 4 }
-
-atsIdentModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A string identifying the model number of the Automatic Transfer Switch.
- This value is set at the factory."
- ::= { atsIdent 5 }
-
-atsIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A string identifying the serial number of
- the Automatic Transfer Switch. This value is set at the factory."
- ::= { atsIdent 6 }
-
-atsIdentNominalLineVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "RMS Utility Voltage measured in V."
- ::= { atsIdent 7 }
-
-atsIdentNominalLineFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Utility Power Frequency measured in Hz."
- ::= { atsIdent 8 }
-
--- the atsCalibration group
-
--- Input Voltage Calibration Factor table
-
- atsCalibrationNumInputs OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of inputs to this device."
- ::= { atsCalibrationInput 1 }
-
- atsCalibrationNumInputPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of phases per input for this device."
- ::= { atsCalibrationInput 2 }
-
- atsCalibrationInputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSCalibrationInputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The number of phases per input line to this device."
- ::= { atsCalibrationInput 3 }
-
- atsCalibrationInputPhaseEntry OBJECT-TYPE
- SYNTAX ATSCalibrationInputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing calibration information applicable to a
- particular input phase."
- INDEX { atsCalibrationInputTableIndex, atsCalibrationInputPhaseTableIndex }
- ::= { atsCalibrationInputTable 1 }
-
- ATSCalibrationInputPhaseEntry ::= SEQUENCE {
- atsCalibrationInputTableIndex INTEGER,
- atsCalibrationInputPhaseTableIndex INTEGER,
- atsLineVoltageCalibrationFactor INTEGER
- }
-
- atsCalibrationInputTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input identifier."
- ::= { atsCalibrationInputPhaseEntry 1 }
-
- atsCalibrationInputPhaseTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input phase identifier."
- ::= { atsCalibrationInputPhaseEntry 2 }
-
- atsLineVoltageCalibrationFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Line Voltage Calibration factor.
- This value is set at the factory."
- ::= { atsCalibrationInputPhaseEntry 3 }
-
--- Power Supply Voltage Calibration table
-
- atsCalibrationPowerSupplyVoltages OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of power supply voltages supported by this device.
- This variable indicates the number of rows in the
- atsCalibrationPowerSupplyTable. There is one entry per
- supported voltage: 24V, 12V and 5V"
- ::= { atsCalibrationPowerSupply 1 }
-
- atsCalibrationPowerSupplyVoltageTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSCalibrationPowerSupplyVoltageEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of Power Supply table entries."
- ::= { atsCalibrationPowerSupply 2 }
-
- atsCalibrationPowerSupplyVoltageEntry OBJECT-TYPE
- SYNTAX ATSCalibrationPowerSupplyVoltageEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular Power Supply Voltage."
- INDEX { atsCalibrationPowerSupplyVoltageTableIndex }
- ::= { atsCalibrationPowerSupplyVoltageTable 1 }
-
- ATSCalibrationPowerSupplyVoltageEntry ::= SEQUENCE {
- atsCalibrationPowerSupplyVoltageTableIndex INTEGER,
- atsCalibrationPowerSupplyVoltage INTEGER,
- atsPowerSupplyVoltageCalibrationFactor INTEGER
- }
-
- atsCalibrationPowerSupplyVoltageTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The power supply voltage identifier.
- Three power supply voltages are supported by the ATS:
- 24V , 12V and 5V .
- The value of this index indicates the power supply voltage:
- 1 = 24V
- 2 = 12V
- 3 = 5V"
- ::= { atsCalibrationPowerSupplyVoltageEntry 1 }
-
- atsCalibrationPowerSupplyVoltage OBJECT-TYPE
- SYNTAX INTEGER {
- powerSupply24V(1),
- powerSupply12V(2),
- powerSupply(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This value describes the power supply voltage."
- ::= { atsCalibrationPowerSupplyVoltageEntry 2 }
-
- atsPowerSupplyVoltageCalibrationFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The Line Voltage Calibration factor.
- This value is set at the factory."
- ::= { atsCalibrationPowerSupplyVoltageEntry 3 }
-
--- Output Current Calibration table
-
- atsCalibrationNumOutputs OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output lines from this device.
- This variable indicates the number of rows in the
- atsCalibrationOutputTable."
- ::= { atsCalibrationOutput 1 }
-
- atsCalibrationNumOutputPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output phases utilized in this
- device."
- ::= { atsCalibrationOutput 2 }
-
- atsCalibrationOutputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSCalibrationOutputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output table entries."
- ::= { atsCalibrationOutput 3 }
-
- atsCalibrationOutputEntry OBJECT-TYPE
- SYNTAX ATSCalibrationOutputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular output."
- INDEX { atsCalibrationOutputTableIndex, atsCalibrationOutputPhasesTableIndex }
- ::= { atsCalibrationOutputTable 1 }
-
- ATSCalibrationOutputEntry ::= SEQUENCE {
- atsCalibrationOutputTableIndex INTEGER,
- atsCalibrationOutputPhasesTableIndex INTEGER,
- atsOutputCurrentCalibrationFactor INTEGER
- }
-
- atsCalibrationOutputTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output identifier."
- ::= { atsCalibrationOutputEntry 1 }
-
- atsCalibrationOutputPhasesTableIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3),
- neutral(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each calibration factor for each
- output phase utilized in this device and one for neutral. "
- ::= { atsCalibrationOutputEntry 2 }
-
- atsOutputCurrentCalibrationFactor OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output current calibration factor measured in Amps."
- ::= { atsCalibrationOutputEntry 3 }
-
-
--- the atsControl group
-
-atsControlResetATS OBJECT-TYPE
- SYNTAX INTEGER {
- none(1),
- reset(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable will cause the Automatic Transfer Switch to
- perform a power-on reset."
- ::= { atsControl 1 }
-
-atsControlClearAllAlarms OBJECT-TYPE
- SYNTAX INTEGER {
- none(1),
- clear(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable will clear all alarms in the Automatic Transfer Switch."
- ::= { atsControl 2 }
-
--- the atsConfig group
-
-atsConfigProductName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A configurable character string."
- ::= { atsConfig 1 }
-
-atsConfigPreferredSource OBJECT-TYPE
- SYNTAX INTEGER {
- sourceA(1),
- sourceB(2),
- none(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This variable returns the preferred source of power when both sources are OK."
- ::= { atsConfig 2 }
-
-atsConfigFrontPanelLockout OBJECT-TYPE
- SYNTAX INTEGER {
- disableFrontPanel(1),
- enableFrontPanel(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Setting this variable to disableFrontPanel(1) will disallow source
- preference configuration of the Automatic Transfer Switch via the
- Front Panel. Once this value is set, it can only be re-enabled through
- the serial interface of the ATS.
- When this variable is set to enableFrontPanel(2), source preference
- configuration of the Automatic Transfer Switch via the Front Panel
- is allowed."
- ::= { atsConfig 3 }
-
-atsConfigVoltageSensitivity OBJECT-TYPE
- SYNTAX INTEGER {
- high(1),
- low(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This variable defines the sensitivity to changes in voltage:
- high(1) for best protection, low(2) for frequent small line
- voltage changes."
- ::= { atsConfig 4 }
-
-atsConfigTransferVoltageRange OBJECT-TYPE
- SYNTAX INTEGER {
- wide(1),
- medium(2),
- narrow(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This variable defines the range of acceptable voltage from a power source.
- If the voltage measured from the selected input source is not within this
- range, the Automatic Transfer Switch will switch over (transfer) to the
- alternate power source."
-
- ::= { atsConfig 5 }
-
-atsConfigCurrentLimit OBJECT-TYPE
- SYNTAX INTEGER (0..20)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The threshold (in Amps) at which an Over Current Alarm will be generated."
-
- ::= { atsConfig 6 }
-
-
-atsConfigResetValues OBJECT-TYPE
- SYNTAX INTEGER {
- none(1),
- reset(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Resets the ATS configuration to its default values."
-
- ::= { atsConfig 7 }
-
--- the atsStatus group
-
- atsStatusCommStatus OBJECT-TYPE
- SYNTAX INTEGER {
- atsNeverDiscovered(1),
- atsCommEstablished(2),
- atsCommLost(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable returns the current communication status
- of the Automatic Transfer Switch. "
- ::= { atsStatusDeviceStatus 1 }
-
- atsStatusSelectedSource OBJECT-TYPE
- SYNTAX INTEGER {
- sourceA(1),
- sourceB(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable returns the current source of power. "
- ::= { atsStatusDeviceStatus 2 }
-
- atsStatusRedundancyState OBJECT-TYPE
- SYNTAX INTEGER {
- atsRedundancyLost(1),
- atsFullyRedundant(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable returns the current redundancy state of the ATS.
- atsRedundancyLost(1) indicates that the ATS is unable to
- switch over to the alternate power source if the current source fails.
- atsFullyRedundant(2) indicates that the ATS will switch over to
- the alternate power source if the current source fails."
- ::= { atsStatusDeviceStatus 3 }
-
- atsStatusOverCurrentState OBJECT-TYPE
- SYNTAX INTEGER {
- atsOverCurrent(1),
- atsCurrentOK(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable returns the output current state of the ATS.
- atsOverCurrent(1) indicates that the ATS has exceeded the output
- current threshold and will not allow a switch over to the alternate power
- source if the current source fails.
- atsCurrentOK(2) indicates that the output current is below the
- output current threshold."
- ::= { atsStatusDeviceStatus 4 }
-
- atsStatus5VPowerSupply OBJECT-TYPE
- SYNTAX INTEGER {
- atsPowerSupplyFailure(1),
- atsPowerSupplyOK(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable returns the current state of the ATS 5-volt power supply.
- atsPowerSupplyFailure(1) indicates the 5-volt power supply has failed
- and that the ATS serial port Configuration Menu is not accessible .
- atsPowerSupplyOK(2) indicates that the ATS 5-volt power supply
- is operating within tolerance."
- ::= { atsStatusDeviceStatus 5 }
-
- atsStatus24VPowerSupply OBJECT-TYPE
- SYNTAX INTEGER {
- atsPowerSupplyFailure(1),
- atsPowerSupplyOK(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This variable returns the current state of the ATS 24-volt power supply.
- atsPowerSupplyFailure(1) indicates the 24-volt power supply has failed
- and the ATS is unable to switch over to the alternate power source if
- the current source fails.
- atsPowerSupplyOK(2) indicates that the ATS 24-volt power supply
- is operating within tolerance."
- ::= { atsStatusDeviceStatus 6 }
-
- atsStatusResetMaxMinValues OBJECT-TYPE
- SYNTAX INTEGER {
- none(1),
- reset(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Resets the maximum and minimum ATS values:
- atsInputMaxVoltage, atsInputMinVoltage,
- atsInputMaxCurrent, atsInputMinCurrent,
- atsInputMaxPower, atsInputMinPower,
- atsOutputMaxCurrent, atsOutputMinCurrent,
- atsOutputMaxLoad, atsOutputMinLoad,
- atsOutputMaxPercentLoad, atsOutputMinPercentLoad,
- atsOutputMaxPower, atsOutputMinPower,
- atsOutputMaxPercentPower, atsOutputMinPercentPower.
- These variables represent the maximum and minimum ATS values
- since the last time they were read or reset by this OID.
- Values unsupported by this ATS will return (-1)."
- ::= { atsStatusResetValues 1 }
-
---
--- Input Group
---
-
--- Number of Inputs
-
- atsNumInputs OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input feeds to this device.
- This variable indicates the number of rows in the
- input table."
- ::= { atsStatusInput 1 }
-
--- Input Table
-
- atsInputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSPhaseInputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of input table entries. The number of entries
- is given by the value of atsNumInputs."
- ::= { atsStatusInput 2 }
-
- atsInputEntry OBJECT-TYPE
- SYNTAX ATSPhaseInputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular input."
- INDEX { atsInputTableIndex }
- ::= { atsInputTable 1 }
-
- ATSPhaseInputEntry ::= SEQUENCE {
- atsInputTableIndex INTEGER,
- atsNumInputPhases INTEGER,
- atsInputVoltageOrientation INTEGER,
- atsInputFrequency INTEGER,
- atsInputType INTEGER,
- atsInputName DisplayString
- }
-
- atsInputTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input identifier."
- ::= { atsInputEntry 1 }
-
- atsNumInputPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of input phases utilized in this
- device. The sum of all the atsNumInputPhases
- variable indicates the number of rows in the
- input phase table."
- ::= { atsInputEntry 2 }
-
- atsInputVoltageOrientation OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- singlePhase(2),
- splitPhase(3),
- threePhasePhaseToNeutral(4),
- threePhasePhaseToPhase(5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input voltage orientation:
- 1: unknown for this Source
- 2: singlePhase - phase 1 voltage is between Phase 1
- and Neutral.
- 3: splitPhase - phase 1 voltage is between Phase 1 and
- Neutral; phase 2 voltage is between Phase 2 and Neutral;
- phase 3 voltage is between Phase 1 and Phase2.
- 4: threePhasePhaseToNeutral - phase 1 voltage is between
- Phase 1 and Neutral; phase 2 voltage is between Phase 2
- and Neutral; phase 3 voltage is between Phase3 and
- Neutral.
- 5: threePhasePhaseToPhase - phase 1 voltage is between
- Phase 1 and Phase 2; phase 2 voltage is between Phase 2
- and Phase 3; phase 3 voltage is between Phase 3 and
- Phase 1."
- ::= { atsInputEntry 3 }
-
- atsInputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input frequency in Hertz, or -1 if it's unsupported
- by this Source."
- ::= { atsInputEntry 4 }
-
- atsInputType OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- main(2),
- bypass(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input type."
- ::= { atsInputEntry 5 }
-
- atsInputName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A name given to a particular input."
- ::= { atsInputEntry 6 }
-
--- Input Phase Table
-
- atsInputPhaseTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSPhaseInputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of input table entries. The number of entries
- is given by the sum of the atsNumInputPhases."
- ::= { atsStatusInput 3 }
-
- atsInputPhaseEntry OBJECT-TYPE
- SYNTAX ATSPhaseInputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular input phase."
- INDEX { atsInputPhaseTableIndex, atsInputPhaseIndex }
- ::= { atsInputPhaseTable 1 }
-
- ATSPhaseInputPhaseEntry ::= SEQUENCE {
- atsInputPhaseTableIndex INTEGER,
- atsInputPhaseIndex INTEGER,
- atsInputVoltage INTEGER,
- atsInputMaxVoltage INTEGER,
- atsInputMinVoltage INTEGER,
- atsInputCurrent INTEGER,
- atsInputMaxCurrent INTEGER,
- atsInputMinCurrent INTEGER,
- atsInputPower INTEGER,
- atsInputMaxPower INTEGER,
- atsInputMinPower INTEGER
- }
-
- atsInputPhaseTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input identifier."
- ::= { atsInputPhaseEntry 1 }
-
- atsInputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input phase identifier."
- ::= { atsInputPhaseEntry 2 }
-
- atsInputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input voltage in VAC, or -1 if it's unsupported
- by this Source."
- ::= { atsInputPhaseEntry 3 }
-
- atsInputMaxVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum input voltage in VAC measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsInputPhaseEntry 4 }
-
- atsInputMinVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum input voltage in VAC measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsInputPhaseEntry 5 }
-
- atsInputCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input current in amperes, or -1 if it's
- unsupported by this Source."
- ::= { atsInputPhaseEntry 6 }
-
- atsInputMaxCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum input current in amperes measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsInputPhaseEntry 7 }
-
- atsInputMinCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum input current in amperes measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsInputPhaseEntry 8 }
-
- atsInputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The input power in Watts, or -1 if it's unsupported
- by this Source."
- ::= { atsInputPhaseEntry 9 }
-
- atsInputMaxPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum input power in Watts measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsInputPhaseEntry 10 }
-
- atsInputMinPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum input power in Watts measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsInputPhaseEntry 11 }
-
- --
- -- The Output group.
- --
-
- -- Number of Outputs
-
- atsNumOutputs OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output feeds to this device.
- This variable indicates the number of rows in the
- output table."
- ::= { atsStatusOutput 1 }
-
- -- Output Table
-
- atsOutputTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSPhaseOutputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output table entries. The number of entries
- is given by the value of atsOutputNumPhases."
- ::= { atsStatusOutput 2 }
-
- atsOutputEntry OBJECT-TYPE
- SYNTAX ATSPhaseOutputEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular output."
- INDEX { atsOutputTableIndex }
- ::= { atsOutputTable 1 }
-
- ATSPhaseOutputEntry ::= SEQUENCE {
- atsOutputTableIndex INTEGER,
- atsNumOutputPhases INTEGER,
- atsOutputVoltageOrientation INTEGER,
- atsOutputFrequency INTEGER
- }
-
- atsOutputTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output identifier."
- ::= { atsOutputEntry 1 }
-
- atsNumOutputPhases OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output phases utilized in this
- device. The sum of all the atsNumOutputPhases
- variable indicates the number of rows in the
- output phase table."
- ::= { atsOutputEntry 2 }
-
- atsOutputVoltageOrientation OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- singlePhase(2),
- splitPhase(3),
- threePhasePhaseToNeutral(4),
- threePhasePhaseToPhase(5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output voltage orientation:
- 1: unknown for this ATS
- 2: singlePhase - phase 1 voltage is between Phase 1
- and Neutral.
- 3: splitPhase - phase 1 voltage is between Phase 1 and
- Neutral; phase 2 voltage is between Phase 2 and Neutral;
- phase 3 voltage is between Phase 1 and Phase2.
- 4: threePhasePhaseToNeutral - phase 1 voltage is between
- Phase 1 and Neutral; phase 2 voltage is between Phase 2
- and Neutral; phase 3 voltage is between Phase3 and
- Neutral.
- 5: threePhasePhaseToPhase - phase 1 voltage is between
- Phase 1 and Phase 2; phase 2 voltage is between Phase 2
- and Phase 3; phase 3 voltage is between Phase 3 and
- Phase 1."
- ::= { atsOutputEntry 3 }
-
- atsOutputFrequency OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output frequency in Hertz, or -1 if it's
- unsupported by this ATS."
- ::= { atsOutputEntry 4 }
-
- -- Output Phase Table
-
- atsOutputPhaseTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ATSPhaseOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output table entries. The number of
- entries is given by the sum of the atsNumOutputPhases."
- ::= { atsStatusOutput 3 }
-
- atsOutputPhaseEntry OBJECT-TYPE
- SYNTAX ATSPhaseOutputPhaseEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An entry containing information applicable to a
- particular output phase."
- INDEX { atsOutputPhaseTableIndex, atsOutputPhaseIndex }
- ::= { atsOutputPhaseTable 1 }
-
- ATSPhaseOutputPhaseEntry ::= SEQUENCE {
- atsOutputPhaseTableIndex INTEGER,
- atsOutputPhaseIndex INTEGER,
- atsOutputVoltage INTEGER,
- atsOutputCurrent INTEGER,
- atsOutputMaxCurrent INTEGER,
- atsOutputMinCurrent INTEGER,
- atsOutputLoad INTEGER,
- atsOutputMaxLoad INTEGER,
- atsOutputMinLoad INTEGER,
- atsOutputPercentLoad INTEGER,
- atsOutputMaxPercentLoad INTEGER,
- atsOutputMinPercentLoad INTEGER,
- atsOutputPower INTEGER,
- atsOutputMaxPower INTEGER,
- atsOutputMinPower INTEGER,
- atsOutputPercentPower INTEGER,
- atsOutputMaxPercentPower INTEGER,
- atsOutputMinPercentPower INTEGER
- }
-
- atsOutputPhaseTableIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output identifier."
- ::= { atsOutputPhaseEntry 1 }
-
- atsOutputPhaseIndex OBJECT-TYPE
- SYNTAX INTEGER{
- phase1(1),
- phase2(2),
- phase3(3),
- neutral(4)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Description of each output phase utilized in
- this device and one for neutral. "
- ::= { atsOutputPhaseEntry 2 }
-
- atsOutputVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output voltage in VAC, or -1 if it's unsupported
- by this ATS."
- ::= { atsOutputPhaseEntry 3 }
-
- atsOutputCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output current in 0.1 amperes drawn
- by the load on the ATS, or -1 if it's unsupported
- by this ATS."
- ::= { atsOutputPhaseEntry 4 }
-
- atsOutputMaxCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum output current in 0.1 amperes measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 5 }
-
- atsOutputMinCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum output current in 0.1 amperes measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 6 }
-
- atsOutputLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output load in VA, or -1 if it's unsupported
- by this ATS."
- ::= { atsOutputPhaseEntry 7 }
-
- atsOutputMaxLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum output load in VA measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 8 }
-
- atsOutputMinLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum output load in VA measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 9 }
-
- atsOutputPercentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The percentage of the ATS load capacity in VA at
- redundancy @ (n + x) presently being used on this
- output phase, or -1 if it's unsupported by this ATS."
- ::= { atsOutputPhaseEntry 10 }
-
- atsOutputMaxPercentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum percentage of the ATS load capacity in
- VA measured at redundancy @ (n + x) presently
- being used on this output phase since the last time
- this variable was read or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 11 }
-
- atsOutputMinPercentLoad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum percentage of the ATS load capacity in
- VA measured at redundancy @ (n + x) presently
- being used on this output phase since the last time
- this variable was read or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 12 }
-
- atsOutputPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The output power in Watts, or -1 if it's
- unsupported by this ATS."
- ::= { atsOutputPhaseEntry 13 }
-
- atsOutputMaxPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum output power in Watts measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 14 }
-
- atsOutputMinPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum output power in Watts measured
- since the last time this variable was read
- or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 15 }
-
- atsOutputPercentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The percentage of the ATSpower capacity in Watts at
- redundancy @ (n + x) presently being used on this
- output phase, or -1 if it's unsupported by this ATS."
- ::= { atsOutputPhaseEntry 16 }
-
- atsOutputMaxPercentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum percentage of the ATSpower capacity
- in Watts measured at redundancy @ (n + x) presently
- being used on this output phase since the last time
- this variable was read or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 17 }
-
- atsOutputMinPercentPower OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The minimum percentage of the ATSpower capacity
- in Watts measured at redundancy @ (n + x) presently
- being used on this output phase since the last time
- this variable was read or reset (atsStatusResetMaxMinValues).
- Returns (-1) if unsupported."
- ::= { atsOutputPhaseEntry 18 }
-
--- the dcmim2IdentSystem group
-
-dcmim2IdentSysFWVersion OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Integer representation of the power plant Master Controller firmware revision."
- ::= { dcmim2IdentSystem 1 }
-
-
--- the dcmim2ControlSystem group
-
-dcmim2ControlRunFunctBatteryTest OBJECT-TYPE
- SYNTAX INTEGER {
- battTestOff (1),
- battTestOn (2)
-}
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the battery functional test state. If
- the test is off, the battTestOff (1) value will be returned.
- If the test is on, the battTestOn (2) value will be
- returned.
-
- Setting this OID to battTestOff (1) will turn the battery functional test off.
- Setting this OID to battTestOn (2) will turn the battery functional test on."
-
- ::= { dcmim2ControlSystem 1 }
-
-dcmim2ControlRunCapacityBatteryTest OBJECT-TYPE
- SYNTAX INTEGER {
- battTestOff (1),
- battTestOn (2)
-}
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return the battery capacity test state. If
- the test is off, the battTestOff (1) value will be returned.
- If the test is on, the battTestOn (2) value will be
- returned.
-
- Setting this OID to battTestOff (1) will turn the battery capacity test off.
- Setting this OID to battTestOn (2) will turn the battery capacity test on."
-
- ::= { dcmim2ControlSystem 2 }
-
-
--- the dcmim2ConfigSystem group
-
-dcmim2ConfigSysHighTempTrip OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Trip level (threshold) at which System High Temp alarm condition is created.
- Range 28 to 100 (degC).
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
-
-
- ::= { dcmim2ConfigSystem 1 }
-
-dcmim2ConfigSysHighTempReset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Level at which System High Temp alarm condition is reset (cleared).
- Range 25 to (upper temp - 3) (degC).
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
-
- ::= { dcmim2ConfigSystem 2 }
-
-dcmim2ConfigSysLowTempTrip OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Trip level (threshold) at which System Low Temp alarm condition is created.
- Range -100 to 10 (degC).
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
-
- ::= { dcmim2ConfigSystem 3 }
-
-dcmim2ConfigSysLowTempReset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Level at which System Low Temp alarm condition is reset (cleared).
- Range (lower temp + 3) to 13 (degC).
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
-
- ::= { dcmim2ConfigSystem 4 }
-
--- the dcmim2ConfigBattery group
-
-dcmim2ConfigBattFloatVolt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery Float Voltage defined at 25 degrees Celsius.
-
- Values are represented in thousandths of Volts (mV)."
-
- ::= { dcmim2ConfigBattery 1 }
-
-dcmim2ConfigBattMaxRecharge OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery Maximum Recharge Rate. This is the maximum current used
- during battery charging.
-
- Values are represented in thousandths of Amps (mA)."
-
- ::= { dcmim2ConfigBattery 2 }
-
-dcmim2ConfigBattMfgCapacity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Battery capacity (Amp-Hour Size) as specified by the battery manufacturer.
-
- Values are represented in thousandths of Amp hours (mAHr)."
-
- ::= { dcmim2ConfigBattery 3 }
-
-dcmim2ConfigBattType OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Type of battery in the powerplant
-
- Valid values range from 0 to 254."
-
- ::= { dcmim2ConfigBattery 4 }
-
-dcmim2ConfigBattFunctTestDuration OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Duration of the battery functional test.
-
- Values are represented in thousandths of seconds (mSecs)."
-
- ::= { dcmim2ConfigBattery 5 }
-
-dcmim2ConfigBattFunctTestThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold the battery voltage of the system must remain above
- in order to pass the battery functional test.
-
- Values are represented in thousandths of Volts (mV)."
-
- ::= { dcmim2ConfigBattery 6 }
-
-dcmim2ConfigBattCapacityTestPercent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Threshold for good battery capacity test results.
-
- Values range from 0 to 100 percent."
-
- ::= { dcmim2ConfigBattery 7 }
-
-dcmim2ConfigBattCapacityTestEndThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Safeguard voltage at which battery capacity test will end
- if there is a battery problem.
-
- Values are represented in thousandths of Volts (mV)."
-
- ::= { dcmim2ConfigBattery 8 }
-
-dcmim2ConfigBattCapacityTestCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Constant current value used during battery capacity testing.
-
- Values are represented in thousandths of Amps (mA)."
-
- ::= { dcmim2ConfigBattery 9 }
-
-
--- the dcmim2ConfigLVD group
-
-dcmim2ConfigLVDTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant LVDs controllable
- by this IP address."
- ::= { dcmim2ConfigLVD 1 }
-
-dcmim2ConfigLVDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF DC2ConfigLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the LVDs. The number of
- entries is contained in the dcmim2ConfigLVDTableSize OID."
- ::= { dcmim2ConfigLVD 2 }
-
-dcmim2ConfigLVDEntry OBJECT-TYPE
- SYNTAX DC2ConfigLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The LVD to configure."
- INDEX { dcmim2ConfigLVDIndex }
- ::= { dcmim2ConfigLVDTable 1 }
-
-DC2ConfigLVDEntry ::=
- SEQUENCE {
- dcmim2ConfigLVDIndex INTEGER,
- dcmim2ConfigLVDTrip INTEGER,
- dcmim2ConfigLVDReset INTEGER,
- dcmim2ConfigLVDState INTEGER
- }
-
-dcmim2ConfigLVDIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant LVD."
- ::= { dcmim2ConfigLVDEntry 1 }
-
-dcmim2ConfigLVDTrip OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "LVD Trip threshold. System bus voltage at which LVD will trip (open)
- during a battery backup operation.
-
- Values are represented in thousandths of Volts (mV)."
- ::= { dcmim2ConfigLVDEntry 2 }
-
-dcmim2ConfigLVDReset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "LVD Reset threshold. System bus voltage at which LVD will reset (close)
- after AC power has been restored.
-
- Values are represented in thousandths of Volts (mV)."
- ::= { dcmim2ConfigLVDEntry 3 }
-
-dcmim2ConfigLVDState OBJECT-TYPE
- SYNTAX INTEGER {
- statusClosed (1),
- statusOpened (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusClosed (1) if the LVD is closed.
- statusOpened (2) will be returned if the LVD is opened."
- ::= { dcmim2ConfigLVDEntry 4 }
-
-
--- the dcmim2StatusSystem group
-
-dcmim2StatusSysRectCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System (Total Rectifier) current in thousandths of Amps (mA)."
- ::= { dcmim2StatusSystem 1 }
-
-dcmim2StatusSysLoadCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Load current in thousandths of Amps (mA)."
- ::= { dcmim2StatusSystem 2 }
-
-dcmim2StatusSysBusVoltage OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System bus voltage in thousandths of Volts (mV)."
- ::= { dcmim2StatusSystem 3 }
-
-dcmim2StatusSysAmbientTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "System temperature based on sensor on Master Controller PCB.
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
- ::= { dcmim2StatusSystem 4 }
-
-dcmim2StatusSysUpTime OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Length of time since the DC Powerplant controller has been powered up."
- ::= { dcmim2StatusSystem 5 }
-
-dcmim2StatusSysTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- in the DC system, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { dcmim2StatusSystem 6 }
-
-
--- the dcmim2StatusRectifier group
-
-dcmim2StatusRectTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant rectifiers viewable
- by this IP address."
- ::= { dcmim2StatusRectifier 1 }
-
-dcmim2StatusRectTable OBJECT-TYPE
- SYNTAX SEQUENCE OF DC2StatusRectEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing settings of the rectifiers. The number of
- entries is contained in the dcmim2StatusRectTableSize OID."
- ::= { dcmim2StatusRectifier 2 }
-
-dcmim2StatusRectEntry OBJECT-TYPE
- SYNTAX DC2StatusRectEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The rectifier to gather status from."
- INDEX { dcmim2StatusRectIndex }
- ::= { dcmim2StatusRectTable 1 }
-
-DC2StatusRectEntry ::=
- SEQUENCE {
- dcmim2StatusRectIndex INTEGER,
- dcmim2StatusRectDevType INTEGER,
- dcmim2StatusRectID INTEGER,
- dcmim2StatusRectPhyAddr INTEGER,
- dcmim2StatusRectFail INTEGER,
- dcmim2StatusRectCurrent INTEGER
- }
-
-dcmim2StatusRectIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant rectifier."
- ::= { dcmim2StatusRectEntry 1 }
-
-dcmim2StatusRectDevType OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier device type."
- ::= { dcmim2StatusRectEntry 2 }
-
-dcmim2StatusRectID OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier ID. This enumerates the number of the rectifier within
- a group of rectifiers."
- ::= { dcmim2StatusRectEntry 3 }
-
-dcmim2StatusRectPhyAddr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the rectifier physical address (the address on the bus)."
- ::= { dcmim2StatusRectEntry 4 }
-
-dcmim2StatusRectFail OBJECT-TYPE
- SYNTAX INTEGER {
- statusTrue (1),
- statusFalse (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusTrue (1) if the rectifier has failed.
- statusFalse (2) will be returned if the rectifier has not failed."
- ::= { dcmim2StatusRectEntry 5 }
-
-dcmim2StatusRectCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID shows the individual rectifier current in thousandths of Amps (mA)."
- ::= { dcmim2StatusRectEntry 6 }
-
-
--- the dcmim2StatusBattery group
-
-dcmim2StatusBattFloatVolt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery Float Voltage represented in thousandths of Volts (mV)."
- ::= { dcmim2StatusBattery 1 }
-
-dcmim2StatusBattCurrent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery Current: This OID shows the battery current in thousandths of Amps (mA)."
- ::= { dcmim2StatusBattery 2 }
-
-dcmim2StatusBattTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery Temperature:
-
- Values are represented in thousandths of a degree.
- Units are displayed in the scale shown in
- the 'dcmim2StatusSysTempUnits' OID (Celsius or Fahrenheit)."
- ::= { dcmim2StatusBattery 3 }
-
-dcmim2StatusBattMfgCapacity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery capacity (Amp-Hour Size) as specified by the battery manufacturer.
- Values are represented in thousandths of Amp hours (mAHr)."
- ::= { dcmim2StatusBattery 4 }
-
-dcmim2StatusBattTestCapacity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Battery capacity (Amp-Hour Size) as determined by the battery capacity test.
- Values are represented in thousandths of Amp hours (mAHr)."
- ::= { dcmim2StatusBattery 5 }
-
-dcmim2StatusBattFunctTestResult OBJECT-TYPE
- SYNTAX INTEGER{
- functTestNotPerformed (1),
- functTestInProcess (2),
- functTestInterrupted (3),
- functTestPass (4),
- functTestFail (5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Results of the last battery functional test that was run."
- ::= { dcmim2StatusBattery 6 }
-
-dcmim2StatusBattCapacityTestResult OBJECT-TYPE
- SYNTAX INTEGER{
- capacityTestNotPerformed (1),
- capacityTestInProcess (2),
- capacityTestInterrupted (3),
- capacityTestPass (4),
- capacityTestFail (5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Results of the last battery capacity test that was run."
- ::= { dcmim2StatusBattery 7 }
-
-
--- the dcmim2StatusLVD group
-
-dcmim2StatusLVDTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant LVDs accessible
- by this IP address."
- ::= { dcmim2StatusLVD 1 }
-
-dcmim2StatusLVDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF DC2StatusLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing the LVDs. The number of
- entries is contained in the dcmim2StatusLVDTableSize OID."
- ::= { dcmim2StatusLVD 2 }
-
-dcmim2StatusLVDEntry OBJECT-TYPE
- SYNTAX DC2StatusLVDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The LVD to access."
- INDEX { dcmim2StatusLVDIndex }
- ::= { dcmim2StatusLVDTable 1 }
-
-DC2StatusLVDEntry ::=
- SEQUENCE {
- dcmim2StatusLVDIndex INTEGER,
- dcmim2StatusLVDState INTEGER
- }
-
-dcmim2StatusLVDIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the DC powerplant LVD."
- ::= { dcmim2StatusLVDEntry 1 }
-
-dcmim2StatusLVDState OBJECT-TYPE
- SYNTAX INTEGER {
- statusClosed (1),
- statusOpened (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this OID will return statusClosed (1) if the LVD is closed.
- statusOpened (2) will be returned if the LVD is opened."
- ::= { dcmim2StatusLVDEntry 2 }
-
-
--- the dcmim2StatusAlarms group
-
-dcmim2StatusAlarmsTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of DC powerplant alarms viewable
- by this IP address."
- ::= { dcmim2StatusAlarms 1 }
-
-dcmim2StatusAlarmsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF DC2StatusAlarmsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for accessing system alarms. The number of
- entries is contained in the dcmim2StatusAlarmsTableSize OID."
- ::= { dcmim2StatusAlarms 2 }
-
-dcmim2StatusAlarmsEntry OBJECT-TYPE
- SYNTAX DC2StatusAlarmsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The alarm to display."
- INDEX { dcmim2StatusAlarmsIndex }
- ::= { dcmim2StatusAlarmsTable 1 }
-
-DC2StatusAlarmsEntry ::=
- SEQUENCE {
- dcmim2StatusAlarmsIndex INTEGER,
- dcmim2StatusAlarmsText DisplayString
- }
-
-dcmim2StatusAlarmsIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the system alarm."
- ::= { dcmim2StatusAlarmsEntry 1 }
-
-dcmim2StatusAlarmsText OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The 16 character text describing the active alarm condition."
- ::= { dcmim2StatusAlarmsEntry 2 }
-
--- External Environmental Monitor
-
-emIdentFirmwareRevision OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the Environmental Monitor."
- ::= { emIdent 1 }
-
-emConfigProbesNumProbes OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of temperature and humidity probes available."
- ::= { emConfig 1 }
-
-emConfigProbesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EmConfigProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of probes supported by the Environmental Monitor
- and their configurations."
- ::= { emConfig 2 }
-
-emConfigProbesEntry OBJECT-TYPE
- SYNTAX EmConfigProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Environmental Monitor probe configurations."
- INDEX { emConfigProbeNumber }
- ::= { emConfigProbesTable 1 }
-
-EmConfigProbesEntry ::=
- SEQUENCE {
- emConfigProbeNumber
- INTEGER,
- emConfigProbeName
- DisplayString,
- emConfigProbeHighTempThreshold
- INTEGER,
- emConfigProbeLowTempThreshold
- INTEGER,
- emConfigProbeTempUnits
- INTEGER,
- emConfigProbeHighHumidThreshold
- INTEGER,
- emConfigProbeLowHumidThreshold
- INTEGER,
- emConfigProbeHighTempEnable
- INTEGER,
- emConfigProbeLowTempEnable
- INTEGER,
- emConfigProbeHighHumidEnable
- INTEGER,
- emConfigProbeLowHumidEnable
- INTEGER
- }
-
-emConfigProbeNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index into an Environmental Monitor probe entry."
- ::= { emConfigProbesEntry 1 }
-
-emConfigProbeName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A descriptive name of the probe set by the user,
- possibly denoting its location or purpose."
- ::= { emConfigProbesEntry 2 }
-
-emConfigProbeHighTempThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high temperature alarm threshold for the probe.
- Units are displayed in the scale selected in
- the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
- ::= { emConfigProbesEntry 3 }
-
-emConfigProbeLowTempThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low temperature alarm threshold for the probe.
- Units are displayed in the scale selected in
- the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
- ::= { emConfigProbesEntry 4 }
-
-emConfigProbeTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- thresholds of the probe, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { emConfigProbesEntry 5 }
-
-emConfigProbeHighHumidThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high humidity alarm threshold for the probe in
- percent relative humidity."
- ::= { emConfigProbesEntry 6 }
-
-emConfigProbeLowHumidThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low humidity alarm threshold for the probe in
- percent relative humidity."
- ::= { emConfigProbesEntry 7 }
-
-emConfigProbeHighTempEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high temperature alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { emConfigProbesEntry 8 }
-
-emConfigProbeLowTempEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low temperature alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { emConfigProbesEntry 9 }
-
-emConfigProbeHighHumidEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high humidity alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { emConfigProbesEntry 10 }
-
-emConfigProbeLowHumidEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low humidity alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { emConfigProbesEntry 11 }
-
-emConfigContactsNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts supported by the Environmental
- Monitor."
- ::= { emConfig 3 }
-
-emConfigContactsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EmConfigContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the Environmental Monitor
- and their configurations."
- ::= { emConfig 4 }
-
-emConfigContactsEntry OBJECT-TYPE
- SYNTAX EmConfigContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Environmental Monitor contact configurations."
- INDEX { emConfigContactNumber }
- ::= { emConfigContactsTable 1 }
-
-EmConfigContactsEntry ::=
- SEQUENCE {
- emConfigContactNumber
- INTEGER,
- emConfigContactName
- DisplayString,
- emConfigContactEnable
- INTEGER
- }
-
-emConfigContactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of an Environmental Monitor contact."
- ::= { emConfigContactsEntry 1 }
-
-emConfigContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for an Environmental Monitor
- contact set by the user, possibly denoting its
- location or purpose."
- ::= { emConfigContactsEntry 2 }
-
-emConfigContactEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An Environmental Monitor contact alarm enable/disable.
- No alarm will be generated if the contact is disabled(1).
- An alarm will be generated if the contact is enabled(2)
- and the contact has been faulted."
- ::= { emConfigContactsEntry 3 }
-
-emStatusCommStatus OBJECT-TYPE
- SYNTAX INTEGER {
- noComm(1),
- comm(2),
- commLost(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The communication status between the agent
- and the Environmental Monitor.
-
- noComm(1), Communication has never been established.
- comm(2), Communication has been established.
- commLost(3), Communication was established, but was lost."
- ::= { emStatus 1 }
-
-emStatusProbesNumProbes OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of available probes on the Environmental
- Monitor."
- ::= { emStatus 2 }
-
-emStatusProbesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EmStatusProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of probes supported by the Environmental Monitor
- and their status."
- ::= { emStatus 3 }
-
-emStatusProbesEntry OBJECT-TYPE
- SYNTAX EmStatusProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The status of the probe."
- INDEX { emStatusProbeNumber }
- ::= { emStatusProbesTable 1 }
-
-EmStatusProbesEntry ::=
- SEQUENCE {
- emStatusProbeNumber
- INTEGER,
- emStatusProbeName
- DisplayString,
- emStatusProbeStatus
- INTEGER,
- emStatusProbeCurrentTemp
- INTEGER,
- emStatusProbeTempUnits
- INTEGER,
- emStatusProbeCurrentHumid
- INTEGER,
- emStatusProbeHighTempViolation
- INTEGER,
- emStatusProbeLowTempViolation
- INTEGER,
- emStatusProbeHighHumidViolation
- INTEGER,
- emStatusProbeLowHumidViolation
- INTEGER
- }
-
-emStatusProbeNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the probe."
- ::= { emStatusProbesEntry 1 }
-
-emStatusProbeName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the probe set by the user,
- possibly denoting its location or purpose."
- ::= { emStatusProbesEntry 2 }
-
-emStatusProbeStatus OBJECT-TYPE
- SYNTAX INTEGER {
- disconnected(1),
- connected(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The connected status of the probe, either
- disconnected(1) or connected(2)."
- ::= { emStatusProbesEntry 3 }
-
-emStatusProbeCurrentTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current temperature reading from the probe displayed
- in the units shown in the 'emStatusProbeTempUnits' OID
- (Celsius or Fahrenheit)."
- ::= { emStatusProbesEntry 4 }
-
-emStatusProbeTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- thresholds of the probe, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { emStatusProbesEntry 5 }
-
-emStatusProbeCurrentHumid OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current humidity reading from the probe in
- percent relative humidity."
- ::= { emStatusProbesEntry 6 }
-
-emStatusProbeHighTempViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- highTempViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The high temperature violation status of the probe
- temperature reading. This OID will show a highTempViolation(2)
- if the current temperature reading shown in the
- 'emStatusProbeCurrentTemp' OID is greater than or equal to
- the high temperature threshold value, the
- 'emConfigProbeHighTempThreshold' OID, and the value of the
- 'emConfigProbeHighTempEnable' OID is enabled. Otherwise it will show
- noViolation(1). If the 'emConfigProbeHighTempEnable' OID is disabled,
- this OID will show disabled(3)."
- ::= { emStatusProbesEntry 7 }
-
-emStatusProbeLowTempViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- lowTempViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The high temperature violation status of the probe
- temperature reading. This OID will show a lowTempViolation(2)
- if the current temperature reading shown in the
- 'emStatusProbeCurrentTemp' OID is less than or equal to
- the low temperature threshold value, the
- 'emConfigProbeLowTempThreshold' OID, and the value of the
- 'emConfigProbeLowTempEnable' OID is enabled. Otherwise it will show
- noViolation(1). If the 'emConfigProbeLowTempEnable' OID is disabled,
- this OID will show disabled(3)."
- ::= { emStatusProbesEntry 8 }
-
-emStatusProbeHighHumidViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- highHumidViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The high humidity violation status of the probe humidity
- reading. This OID will show a highTempViolation(2)
- if the current humidity reading shown in the
- 'emStatusProbeCurrentHumid' OID is greater than or equal to
- the high humidity threshold value, the
- 'emConfigProbeHighHumidThreshold' OID, and the value of the
- 'emConfigProbeHighHumidEnable' OID is enabled. Otherwise it will
- show noViolation(1). If the 'emConfigProbeHighHumidEnable' OID is
- disabled, this OID will show disabled(3)"
- ::= { emStatusProbesEntry 9 }
-
-emStatusProbeLowHumidViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- lowHumidViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The low humidity violation status of the probe humidity
- reading. This OID will show a lowTempViolation(2)
- if the current humidity reading shown in the
- 'emStatusProbeCurrentHumid' OID is less than or equal to
- the low humidity threshold value, the
- 'emConfigProbeLowHumidThreshold' OID, and the value of the
- 'emConfigProbeLowHumidEnable' OID is enabled. Otherwise it will
- show noViolation(1). If the 'emConfigProbeLowHumidEnable' OID is
- disabled, this OID will show disabled(3)."
- ::= { emStatusProbesEntry 10 }
-
-emStatusContactsNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts supported by the
- Environmental Monitor."
- ::= { emStatus 4 }
-
-emStatusContactsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EmStatusContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the Environmental Monitor
- and their status."
- ::= { emStatus 5 }
-
-emStatusContactsEntry OBJECT-TYPE
- SYNTAX EmStatusContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The status of the contact."
- INDEX { emStatusContactNumber }
- ::= { emStatusContactsTable 1 }
-
-EmStatusContactsEntry ::=
- SEQUENCE {
- emStatusContactNumber
- INTEGER,
- emStatusContactName
- DisplayString,
- emStatusContactStatus
- INTEGER
- }
-
-emStatusContactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the Environmental Monitor contact."
- ::= { emStatusContactsEntry 1 }
-
-emStatusContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the Environmental Monitor contact
- set by the user, possibly denoting its location or purpose."
- ::= { emStatusContactsEntry 2 }
-
-emStatusContactStatus OBJECT-TYPE
- SYNTAX INTEGER {
- noFault(1),
- fault(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Environmental Monitor contact. The status
- will show noFault(1) if the contact is in the normal state
- and the 'emConfigContactEnable' OID is enabled. The status will
- show a fault(2) if the contact is faulted and the
- 'emContactEnable' OID is enabled. If the 'emConfigContactEnable'
- OID is disabled, the status will show disabled(3)."
- ::= { emStatusContactsEntry 3 }
-
--- Integrated Environmental Monitor (IEM)
-
-iemIdentHardwareRevision OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the Integrated Environmental
- Monitor."
- ::= { iemIdent 1 }
-
-iemConfigProbesNumProbes OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of temperature and humidity probes available."
- ::= { iemConfig 1 }
-
-iemConfigProbesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IemConfigProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of probes supported by the Environmental Monitor
- and their configurations."
- ::= { iemConfig 2 }
-
-iemConfigProbesEntry OBJECT-TYPE
- SYNTAX IemConfigProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Environmental Monitor probe configurations."
- INDEX { iemConfigProbeNumber }
- ::= { iemConfigProbesTable 1 }
-
-IemConfigProbesEntry ::=
- SEQUENCE {
- iemConfigProbeNumber
- INTEGER,
- iemConfigProbeName
- DisplayString,
- iemConfigProbeHighTempThreshold
- INTEGER,
- iemConfigProbeLowTempThreshold
- INTEGER,
- iemConfigProbeTempUnits
- INTEGER,
- iemConfigProbeHighHumidThreshold
- INTEGER,
- iemConfigProbeLowHumidThreshold
- INTEGER,
- iemConfigProbeHighTempEnable
- INTEGER,
- iemConfigProbeLowTempEnable
- INTEGER,
- iemConfigProbeHighHumidEnable
- INTEGER,
- iemConfigProbeLowHumidEnable
- INTEGER
- }
-
-iemConfigProbeNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to a Environmental Monitor probe entry."
- ::= { iemConfigProbesEntry 1 }
-
-iemConfigProbeName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the probe set by the user,
- possibly denoting its location or purpose."
- ::= { iemConfigProbesEntry 2 }
-
-iemConfigProbeHighTempThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high temperature alarm threshold for the probe.
- Units are displayed in the scale selected in the
- 'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
- ::= { iemConfigProbesEntry 3 }
-
-iemConfigProbeLowTempThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low temperature alarm threshold for the probe.
- Units are displayed in the scale selected in the
- 'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit)."
- ::= { iemConfigProbesEntry 4 }
-
-iemConfigProbeTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- thresholds of the probe, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { iemConfigProbesEntry 5 }
-
-iemConfigProbeHighHumidThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high humidity alarm threshold for the probe in
- percent relative humidity."
- ::= { iemConfigProbesEntry 6 }
-
-iemConfigProbeLowHumidThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low humidity alarm threshold for the probe in
- percent relative humidity."
- ::= { iemConfigProbesEntry 7 }
-
-iemConfigProbeHighTempEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high temperature alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { iemConfigProbesEntry 8 }
-
-iemConfigProbeLowTempEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low temperature alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { iemConfigProbesEntry 9 }
-
-iemConfigProbeHighHumidEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The high humidity alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { iemConfigProbesEntry 10 }
-
-iemConfigProbeLowHumidEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The low humidity alarm enable/disable for the
- probe. No alarm will be generated if this value
- is set to disabled(1). The alarm will be
- generated if this value is set to enabled(2) and
- the threshold has been violated."
- ::= { iemConfigProbesEntry 11 }
-
-iemConfigContactsNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts available on the Environmental
- Monitor."
- ::= { iemConfig 3 }
-
-iemConfigContactsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IemConfigContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the Environmental Monitor
- and their configurations."
- ::= { iemConfig 4 }
-
-iemConfigContactsEntry OBJECT-TYPE
- SYNTAX IemConfigContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The Environmental Monitor contact configurations."
- INDEX { iemConfigContactNumber }
- ::= { iemConfigContactsTable 1 }
-
-IemConfigContactsEntry ::=
- SEQUENCE {
- iemConfigContactNumber
- INTEGER,
- iemConfigContactName
- DisplayString,
- iemConfigContactEnable
- INTEGER
- }
-
-iemConfigContactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of an Environmental Monitor contact."
- ::= { iemConfigContactsEntry 1 }
-
-iemConfigContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the Environmental Monitor contact
- set by the user, possibly denoting its location or purpose."
- ::= { iemConfigContactsEntry 2 }
-
-iemConfigContactEnable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An Environmental Monitor contact alarm enable/disable."
- ::= { iemConfigContactsEntry 3 }
-
-
-iemStatusProbesNumProbes OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of available probes on the Environmental
- Monitor."
- ::= { iemStatus 1 }
-
-iemStatusProbesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IemStatusProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of probes supported by the Environmental Monitor
- and their status."
- ::= { iemStatus 2 }
-
-iemStatusProbesEntry OBJECT-TYPE
- SYNTAX IemStatusProbesEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The status of the probe."
- INDEX { iemStatusProbeNumber }
- ::= { iemStatusProbesTable 1 }
-
-IemStatusProbesEntry ::=
- SEQUENCE {
- iemStatusProbeNumber
- INTEGER,
- iemStatusProbeName
- DisplayString,
- iemStatusProbeStatus
- INTEGER,
- iemStatusProbeCurrentTemp
- INTEGER,
- iemStatusProbeTempUnits
- INTEGER,
- iemStatusProbeCurrentHumid
- INTEGER,
- iemStatusProbeHighTempViolation
- INTEGER,
- iemStatusProbeLowTempViolation
- INTEGER,
- iemStatusProbeHighHumidViolation
- INTEGER,
- iemStatusProbeLowHumidViolation
- INTEGER
- }
-
-iemStatusProbeNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the probe."
- ::= { iemStatusProbesEntry 1 }
-
-iemStatusProbeName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the probe set by the user,
- denoting its location or purpose."
- ::= { iemStatusProbesEntry 2 }
-
-iemStatusProbeStatus OBJECT-TYPE
- SYNTAX INTEGER {
- disconnected(1),
- connected(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The connected status of the probe, either
- disconnected(1) or connected(2)."
- ::= { iemStatusProbesEntry 3 }
-
-iemStatusProbeCurrentTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current temperature reading from the probe displayed
- in the units shown in the 'iemStatusProbeTempUnits' OID
- (Celsius or Fahrenheit)."
- ::= { iemStatusProbesEntry 4 }
-
-iemStatusProbeTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- thresholds of the probe, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { iemStatusProbesEntry 5 }
-
-iemStatusProbeCurrentHumid OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current humidity reading from the probe in percent
- relative humidity."
- ::= { iemStatusProbesEntry 6 }
-
-iemStatusProbeHighTempViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- highTempViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The high temperature violation status of the probe
- temperature reading. This OID will show a highTempViolation(2)
- if the current temperature reading shown in the
- 'iemStatusProbeCurrentTemp' OID is greater than or equal to
- the high temperature threshold value, the
- 'iemConfigProbeHighTempThreshold' OID, and the value of the
- 'iemConfigProbeHighTempEnable' OID is enabled. Otherwise it will show
- noViolation(1). If the 'iemConfigProbeHighTempEnable' OID is disabled,
- this OID will show disabled(3)."
- ::= { iemStatusProbesEntry 7 }
-
-iemStatusProbeLowTempViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- lowTempViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The high temperature violation status of the probe
- temperature reading. This OID will show a lowTempViolation(2)
- if the current temperature reading shown in the
- 'iemStatusProbeCurrentTemp' OID is less than or equal to
- the low temperature threshold value, the
- 'iemConfigProbeLowTempThreshold' OID, and the value of the
- 'iemPConfigrobeLowTempEnable' OID is enabled. Otherwise it will show
- noViolation(1). If the 'iemConfigProbeLowTempEnable' OID is disabled,
- this OID will show disabled(3)."
- ::= { iemStatusProbesEntry 8 }
-
-iemStatusProbeHighHumidViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- highHumidViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The high humidity violation status of the probe humidity
- reading. This OID will show a highTempViolation(2)
- if the current humidity reading shown in the
- 'iemStatusProbeCurrentHumid' OID is greater than or equal to
- the high humidity threshold value, the
- 'iemConfigProbeHighHumidThreshold' OID, and the value of the
- 'iemConfigProbeHighHumidEnable' OID is enabled. Otherwise it will
- show noViolation(1). If the 'iemConfigProbeHighHumidEnable' OID is
- disabled, this OID will show disabled(3)."
- ::= { iemStatusProbesEntry 9 }
-
-iemStatusProbeLowHumidViolation OBJECT-TYPE
- SYNTAX INTEGER {
- noViolation(1),
- lowHumidViolation(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The low humidity violation status of the probe humidity
- reading. This OID will show a lowTempViolation(2)
- if the current humidity reading shown in the
- 'iemStatusProbeCurrentHumid' OID is less than or equal to
- the low humidity threshold value, the
- 'iemConfigProbeLowHumidThreshold' OID, and the value of the
- 'iemConfigProbeLowHumidEnable' OID is enabled. Otherwise it will
- show noViolation(1). If the 'iemConfigProbeLowHumidEnable' OID is
- disabled, this OID will show disabled(3)."
- ::= { iemStatusProbesEntry 10 }
-
-iemStatusContactsNumContacts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of contacts supported on the
- Environmental Monitor."
- ::= { iemStatus 3 }
-
-iemStatusContactsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IemStatusContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of contacts supported by the Environmental Monitor
- and their status."
- ::= { iemStatus 4 }
-
-iemStatusContactsEntry OBJECT-TYPE
- SYNTAX IemStatusContactsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The status of the contact."
- INDEX { iemStatusContactNumber }
- ::= { iemStatusContactsTable 1 }
-
-IemStatusContactsEntry ::=
- SEQUENCE {
- iemStatusContactNumber
- INTEGER,
- iemStatusContactName
- DisplayString,
- iemStatusContactStatus
- INTEGER
- }
-
-iemStatusContactNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the Environmental Monitor contact."
- ::= { iemStatusContactsEntry 1 }
-
-iemStatusContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the Environmental Monitor contact
- set by the user, denoting its location or purpose."
- ::= { iemStatusContactsEntry 2 }
-
-iemStatusContactStatus OBJECT-TYPE
- SYNTAX INTEGER {
- noFault(1),
- fault(2),
- disabled(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the Environmental Monitor contact. The status
- will show noFault(1) if the contact is in the normal state
- and the 'iemConfigContactEnable' OID is enabled. The status will
- show a fault(2) if the contact is faulted and the
- 'iemConfigContactEnable' OID is enabled. If the
- 'iemConfigContactEnable' OID is disabled, the status will show
- disabled(3)."
- ::= { iemStatusContactsEntry 3 }
-
-iemStatusRelaysNumRelays OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of output relays supported on the
- Environmental Monitor."
- ::= { iemStatus 6 }
-
-iemStatusRelaysTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IemStatusRelaysEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of output relays supported by the
- Environmental Monitor and their status."
- ::= { iemStatus 7 }
-
-iemStatusRelaysEntry OBJECT-TYPE
- SYNTAX IemStatusRelaysEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The status of the relay."
- INDEX { iemStatusRelayNumber }
- ::= { iemStatusRelaysTable 1 }
-
-IemStatusRelaysEntry ::=
- SEQUENCE {
- iemStatusRelayNumber
- INTEGER,
- iemStatusRelayName
- DisplayString,
- iemStatusRelayStatus
- INTEGER
- }
-
-iemStatusRelayNumber OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the output relay."
- ::= { iemStatusRelaysEntry 1 }
-
-iemStatusRelayName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A descriptive name for the output relay set by the
- user, denoting its location or purpose."
- ::= { iemStatusRelaysEntry 2 }
-
-iemStatusRelayStatus OBJECT-TYPE
- SYNTAX INTEGER {
- faultState(1),
- normalState(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the output relay, either faultState(1) or
- normalState(2)."
- ::= { iemStatusRelaysEntry 3 }
-
--- Environmental Management System (EMS)
-
--- EMS IDENT
-
-emsIdentEMSName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- device. "
- ::= { emsIdent 1 }
-
-emsIdentProductNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the model number of
- the device. This value is set at the factory."
- ::= { emsIdent 2 }
-
-emsIdentFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The firmware revision of the device."
- ::= { emsIdent 3 }
-
-emsIdentHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The hardware revision of the device.
- This value is set at the factory."
- ::= { emsIdent 4 }
-
-emsIdentDateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The date when the device was manufactured in mm/dd/yyyy format.
- This value is set at the factory. "
- ::= { emsIdent 5 }
-
-emsIdentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the serial number of
- the device. This value is set at the factory."
- ::= { emsIdent 6 }
-
--- EMS CONTROL
-
--- EMS OUTPUT RELAY CONTROL STATUS TABLE
-
-emsOutputRelayControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutputRelayControlEMSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual output relays. The number of
- entries is contained in the emsStatusOutputRelayCount OID."
- ::= { emsOutputRelayControl 1 }
-
-emsOutputRelayControlEntry OBJECT-TYPE
- SYNTAX OutputRelayControlEMSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The output relays to control."
- INDEX { emsOutputRelayControlOutputRelayIndex }
- ::= { emsOutputRelayControlTable 1 }
-
-OutputRelayControlEMSEntry ::=
- SEQUENCE {
- emsOutputRelayControlOutputRelayIndex INTEGER,
- emsOutputRelayControlOutputRelayName DisplayString,
- emsOutputRelayControlOutputRelayCommand INTEGER
- }
-
-emsOutputRelayControlOutputRelayIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the output relay entry."
- ::= { emsOutputRelayControlEntry 1 }
-
-emsOutputRelayControlOutputRelayName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the output relay.
- This OID is provided for informational purposes only."
- ::= { emsOutputRelayControlEntry 2 }
-
-emsOutputRelayControlOutputRelayCommand OBJECT-TYPE
- SYNTAX INTEGER {
- immediateCloseEMS (1),
- immediateOpenEMS (2)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the output relay state. If
- the output relay is closed, the immediateCloseEMS (1) value will be returned.
- If the output relay is open, the immediateOpenEMS (2) value will be
- returned.
-
- Setting this variable to immediateCloseEMS (1) will immediately close the relay.
-
- Setting this variable to immediateOpenEMS (2) will immediately open the relay."
- ::= { emsOutputRelayControlEntry 3 }
-
--- EMS OUTLET CONTROL TABLE
-
-emsOutletControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OutletControlEMSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual outlet switches. The number of
- entries is contained in the emsStatusOutletCount OID."
- ::= { emsOutletControl 1 }
-
-emsOutletControlEntry OBJECT-TYPE
- SYNTAX OutletControlEMSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to control."
- INDEX { emsOutletControlOutletIndex }
- ::= { emsOutletControlTable 1 }
-
-OutletControlEMSEntry ::=
- SEQUENCE {
- emsOutletControlOutletIndex INTEGER,
- emsOutletControlOutletName DisplayString,
- emsOutletControlOutletCommand INTEGER
- }
-
-emsOutletControlOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { emsOutletControlEntry 1 }
-
-emsOutletControlOutletName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet.
- This OID is provided for informational purposes only."
- ::= { emsOutletControlEntry 2 }
-
-emsOutletControlOutletCommand OBJECT-TYPE
- SYNTAX INTEGER {
- immediateOnEMS (1),
- immediateOffEMS (2)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the outlet state. If
- the outlet is on, the immediateOnEMS (1) value will be returned.
- If the outlet is off, the immediateOffEMS (2) value will be
- returned.
-
- Setting this variable to immediateOnEMS (1) will immediately turn the outlet on.
-
- Setting this variable to immediateOffEMS (2) will immediately turn the outlet off."
- ::= { emsOutletControlEntry 3 }
-
--- EMS SENSOR CONTROL TABLE
-
-emsSensorControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSSensorControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control/reset of individual sensors. The number of
- entries is contained in the emsStatusSensorCount OID."
- ::= { emsSensorControl 1 }
-
-emsSensorControlEntry OBJECT-TYPE
- SYNTAX EMSSensorControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The sensors to control/reset."
- INDEX { emsSensorControlSensorIndex }
- ::= { emsSensorControlTable 1 }
-
-EMSSensorControlEntry ::=
- SEQUENCE {
- emsSensorControlSensorIndex INTEGER,
- emsSensorControlSensorSystemName DisplayString,
- emsSensorControlSensorUserName DisplayString,
- emsSensorControlSensorCommand INTEGER
- }
-
-emsSensorControlSensorIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the sensor entry."
- ::= { emsSensorControlEntry 1 }
-
-emsSensorControlSensorSystemName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system name of the sensor. This describes the hardware system
- intent of this sensor."
- ::= { emsSensorControlEntry 2 }
-
-emsSensorControlSensorUserName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the sensor as given by the system user."
- ::= { emsSensorControlEntry 3 }
-
-emsSensorControlSensorCommand OBJECT-TYPE
- SYNTAX INTEGER {
- noCommandEMS (1),
- resetCommandEMS (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return noCommandEMS(1).
-
- Setting this variable to resetCommandEMS(2) will issue a reset command to the
- sensor. Some sensors cannot be manually reset and will not be affected
- by this command."
- ::= { emsSensorControlEntry 4 }
-
--- EMS ALARM DEVICE CONTROL TABLE
-
-emsAlarmDeviceControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF AlarmDeviceControlEMSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for control of individual alarm devices.
- Note: Some alarm devices are not controllable. The number of
- entries is contained in the emsStatusAlarmDeviceCount OID."
- ::= { emsAlarmDeviceControl 1 }
-
-emsAlarmDeviceControlEntry OBJECT-TYPE
- SYNTAX AlarmDeviceControlEMSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The alarm devices to control."
- INDEX { emsAlarmDeviceControlDeviceIndex }
- ::= { emsAlarmDeviceControlTable 1 }
-
-AlarmDeviceControlEMSEntry ::=
- SEQUENCE {
- emsAlarmDeviceControlDeviceIndex INTEGER,
- emsAlarmDeviceControlDeviceName DisplayString,
- emsAlarmDeviceControlDeviceCommand INTEGER
- }
-
-emsAlarmDeviceControlDeviceIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the alarm device entry."
- ::= { emsAlarmDeviceControlEntry 1 }
-
-emsAlarmDeviceControlDeviceName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the alarm device.
- This OID is provided for informational purposes only."
- ::= { emsAlarmDeviceControlEntry 2 }
-
-emsAlarmDeviceControlDeviceCommand OBJECT-TYPE
- SYNTAX INTEGER {
- alarmDeviceOnEMS (1),
- alarmDeviceOffEMS (2),
- alarmDeviceNotInstalledEMS (3)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the device state. If
- the device is active, the alarmDeviceOnEMS (1) value will be returned.
- If the device is inactive, the alarmDeviceOffEMS (2) value will be
- returned. If the device is not installed, the
- alarmDeviceNotInstalledEMS (3) value will be returned.
-
- Actions resulting from setting this variable are device-dependent.
-
- Setting this variable to alarmDeviceOnEMS (1) will turn that device (ex. Beacon) on.
- Setting this variable to alarmDeviceOffEMS (2) will turn that device off."
-
- ::= { emsAlarmDeviceControlEntry 3 }
-
-
--- EMS CONFIG
-
-emsConfigName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the device."
- ::= { emsConfig 1 }
-
-emsConfigCheckLogLight OBJECT-TYPE
- SYNTAX INTEGER {
- lightDisabled (1),
- lightOnInformational (2),
- lightOnWarning (3),
- lightOnSevere (4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The setting of this OID determines the level of event that will
- trigger the check-log light on the EMS. This is not available on the EMU2.
-
- lightDisabled (1) disables the check-log light.
- lightOnInformational (2) lights check-log for any event of
- informational severity or above.
- lightOnWarning (3) lights check-log for any event of
- warning severity or above.
- lightOnSevere (4) lights check-log for any event of severe severity."
-
- ::= { emsConfig 2 }
-
--- EMS PROBE CONFIG TABLE
-
-emsProbeConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSProbeConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual probes. The number of
- entries is contained in the emsStatusProbeCount OID."
- ::= { emsProbeConfig 1 }
-
-emsProbeConfigEntry OBJECT-TYPE
- SYNTAX EMSProbeConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The probes to configure."
- INDEX { emsProbeConfigProbeIndex }
- ::= { emsProbeConfigTable 1 }
-
-EMSProbeConfigEntry ::=
- SEQUENCE {
- emsProbeConfigProbeIndex INTEGER,
- emsProbeConfigProbeName DisplayString,
- emsProbeConfigProbeHighTempThresh INTEGER,
- emsProbeConfigProbeLowTempThresh INTEGER,
- emsProbeConfigProbeHighHumidityThresh INTEGER,
- emsProbeConfigProbeLowHumidityThresh INTEGER,
- emsProbeConfigProbeMaxTempThresh INTEGER,
- emsProbeConfigProbeMinTempThresh INTEGER,
- emsProbeConfigProbeDeltaTemp INTEGER,
- emsProbeConfigProbeMaxHumidityThresh INTEGER,
- emsProbeConfigProbeMinHumidityThresh INTEGER,
- emsProbeConfigProbeDeltaHumidity INTEGER,
- emsProbeConfigProbeSTIncTempVariance INTEGER,
- emsProbeConfigProbeSTIncTempTime INTEGER,
- emsProbeConfigProbeSTDecTempVariance INTEGER,
- emsProbeConfigProbeSTDecTempTime INTEGER,
- emsProbeConfigProbeLTIncTempVariance INTEGER,
- emsProbeConfigProbeLTIncTempTime INTEGER,
- emsProbeConfigProbeLTDecTempVariance INTEGER,
- emsProbeConfigProbeLTDecTempTime INTEGER
- }
-
-emsProbeConfigProbeIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the probe entry."
- ::= { emsProbeConfigEntry 1 }
-
-emsProbeConfigProbeName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the probe."
- ::= { emsProbeConfigEntry 2 }
-
-emsProbeConfigProbeHighTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe high temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 3 }
-
-emsProbeConfigProbeLowTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe low temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 4 }
-
-emsProbeConfigProbeHighHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe high humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeConfigEntry 5 }
-
-emsProbeConfigProbeLowHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe low humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeConfigEntry 6 }
-
-emsProbeConfigProbeMaxTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe maximum temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 7 }
-
-emsProbeConfigProbeMinTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe minimum temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 8 }
-
-emsProbeConfigProbeDeltaTemp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe delta temperature.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 9 }
-
-emsProbeConfigProbeMaxHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe maximum humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeConfigEntry 10 }
-
-emsProbeConfigProbeMinHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe minimum humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeConfigEntry 11 }
-
-emsProbeConfigProbeDeltaHumidity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe delta humidity.
-
- Values are represented in whole number percentage."
- ::= { emsProbeConfigEntry 12 }
-
-emsProbeConfigProbeSTIncTempVariance OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe short-term increasing temperature variance used for rate of change alarms.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 13 }
-
-emsProbeConfigProbeSTIncTempTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe short-term increasing temperature time used for rate of change alarms.
-
- Values are represented in whole number minutes."
- ::= { emsProbeConfigEntry 14 }
-
-emsProbeConfigProbeSTDecTempVariance OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe short-term decreasing temperature variance used for rate of change alarms.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 15 }
-
-emsProbeConfigProbeSTDecTempTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe short-term decreasing temperature time used for rate of change alarms.
-
- Values are represented in whole number minutes."
- ::= { emsProbeConfigEntry 16 }
-
-emsProbeConfigProbeLTIncTempVariance OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe long-term increasing temperature variance used for rate of change alarms.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 17 }
-
-emsProbeConfigProbeLTIncTempTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe long-term increasing temperature time used for rate of change alarms.
-
- Values are represented in whole number hours."
- ::= { emsProbeConfigEntry 18 }
-
-emsProbeConfigProbeLTDecTempVariance OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe long-term decreasing temperature variance used for rate of change alarms.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeConfigEntry 19 }
-
-emsProbeConfigProbeLTDecTempTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Probe long-term decreasing temperature time used for rate of change alarms.
-
- Values are represented in whole number hours."
- ::= { emsProbeConfigEntry 20 }
-
-
--- EMS INPUT CONTACT CONFIG STATUS TABLE
-
-emsInputContactConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSInputContactConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual input contacts. The number of
- entries is contained in the emsStatusInputContactCount OID."
- ::= { emsInputContactConfig 1 }
-
-emsInputContactConfigEntry OBJECT-TYPE
- SYNTAX EMSInputContactConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The input contacts to configure."
- INDEX { emsInputContactConfigInputContactIndex }
- ::= { emsInputContactConfigTable 1 }
-
-EMSInputContactConfigEntry ::=
- SEQUENCE {
- emsInputContactConfigInputContactIndex INTEGER,
- emsInputContactConfigInputContactName DisplayString,
- emsInputContactConfigInputContactNormalState INTEGER
- }
-
-emsInputContactConfigInputContactIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the input contact entry."
- ::= { emsInputContactConfigEntry 1 }
-
-emsInputContactConfigInputContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the input contact."
- ::= { emsInputContactConfigEntry 2 }
-
-emsInputContactConfigInputContactNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyClosedEMS (1),
- normallyOpenEMS (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the input contact. If
- the normal state is closed, the normallyClosedEMS (1) value will be returned.
- If the normal state is closed, the normallyOpenEMS (2) value will be
- returned.
-
- Setting this variable will change the normal state of the input contact"
- ::= { emsInputContactConfigEntry 3 }
-
--- EMS OUTPUT RELAY CONFIG STATUS TABLE
-
-emsOutputRelayConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSOutputRelayConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual output relays. The number of
- entries is contained in the emsStatusOutputRelayCount OID."
- ::= { emsOutputRelayConfig 1 }
-
-emsOutputRelayConfigEntry OBJECT-TYPE
- SYNTAX EMSOutputRelayConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The output relays to configure."
- INDEX { emsOutputRelayConfigOutputRelayIndex }
- ::= { emsOutputRelayConfigTable 1 }
-
-EMSOutputRelayConfigEntry ::=
- SEQUENCE {
- emsOutputRelayConfigOutputRelayIndex INTEGER,
- emsOutputRelayConfigOutputRelayName DisplayString,
- emsOutputRelayConfigOutputRelayNormalState INTEGER
- }
-
-emsOutputRelayConfigOutputRelayIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the output relay entry."
- ::= { emsOutputRelayConfigEntry 1 }
-
-emsOutputRelayConfigOutputRelayName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the output relay."
- ::= { emsOutputRelayConfigEntry 2 }
-
-emsOutputRelayConfigOutputRelayNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyClosedEMS (1),
- normallyOpenEMS (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the output relay. If
- the normal state is closed, the normallyClosedEMS (1) value will be returned.
- If the normal state is closed, the normallyOpenEMS (2) value will be
- returned.
-
- Setting this variable will change the normal state of the output relay"
- ::= { emsOutputRelayConfigEntry 3 }
-
--- EMS OUTLET CONFIG TABLE
-
-emsOutletConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSOutletConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual outlets. The number of
- entries is contained in the emsStatusOutletCount OID."
- ::= { emsOutletConfig 1 }
-
-emsOutletConfigEntry OBJECT-TYPE
- SYNTAX EMSOutletConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to configure."
- INDEX { emsOutletConfigOutletIndex }
- ::= { emsOutletConfigTable 1 }
-
-EMSOutletConfigEntry ::=
- SEQUENCE {
- emsOutletConfigOutletIndex INTEGER,
- emsOutletConfigOutletName DisplayString,
- emsOutletConfigOutletNormalState INTEGER
- }
-
-emsOutletConfigOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { emsOutletConfigEntry 1 }
-
-emsOutletConfigOutletName OBJECT-TYPE
- SYNTAX DisplayString ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet."
- ::= { emsOutletConfigEntry 2 }
-
-emsOutletConfigOutletNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyOnEMS (1),
- normallyOffEMS (2)
- }
-
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the outlet. If
- the normal state is on, the normallyOnEMS (1) value will be returned.
- If the normal state is off, the normallyOffEMS (2) value will be
- returned.
-
- Setting this variable will change the normal state of the outlet"
- ::= { emsOutletConfigEntry 3 }
-
--- EMS SENSOR CONFIG TABLE
-
-emsSensorConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSSensorConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual sensors. The number of
- entries is contained in the emsStatusSensorCount OID."
- ::= { emsSensorConfig 1 }
-
-emsSensorConfigEntry OBJECT-TYPE
- SYNTAX EMSSensorConfigEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The sensors to configure."
- INDEX { emsSensorConfigSensorIndex }
- ::= { emsSensorConfigTable 1 }
-
-EMSSensorConfigEntry ::=
- SEQUENCE {
- emsSensorConfigSensorIndex INTEGER,
- emsSensorConfigSensorSystemName DisplayString,
- emsSensorConfigSensorUserName DisplayString,
- emsSensorConfigSensorNormalState INTEGER,
- emsSensorConfigSensorAlarmDelay INTEGER
- }
-
-emsSensorConfigSensorIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the sensor entry."
- ::= { emsSensorConfigEntry 1 }
-
-emsSensorConfigSensorSystemName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system name of the sensor. This describes the hardware system
- intent of this sensor."
- ::= { emsSensorConfigEntry 2 }
-
-emsSensorConfigSensorUserName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the sensor as given by the system user."
- ::= { emsSensorConfigEntry 3 }
-
-emsSensorConfigSensorNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyClosedEMS (1),
- normallyOpenEMS (2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the sensor. If
- the normal state is closed, the normallyClosedEMS (1) value will be returned.
- If the normal state is closed, the normallyOpenEMS (2) value will be
- returned.
-
- Setting this variable will change the normal state of the sensor. Note:
- Only the AUX sensor in the EMS has a configurable Normal State"
- ::= { emsSensorConfigEntry 4 }
-
-emsSensorConfigSensorAlarmDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The delay (in seconds) after a sensor detects an alarm condition before the
- condition is reported."
- ::= { emsSensorConfigEntry 5 }
-
--- EMS STATUS
---- EMS MASTER status
-
-emsStatusEMSName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- device. "
- ::= { emsStatus 1 }
-
-emsStatusCommStatus OBJECT-TYPE
- SYNTAX INTEGER {
- noComm(1),
- comm(2),
- commLost(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The communication status between the agent
- and the device.
-
- noComm(1), Communication has never been established.
- comm(2), Communication has been established.
- commLost(3), Communication was established, but was lost."
- ::= { emsStatus 2 }
-
-emsStatusProbeCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of T/H probes (both local and remote) that
- is supported by this device."
- ::= { emsStatus 3 }
-
-emsStatusInputContactCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of Input Contacts that
- is supported by this device."
- ::= { emsStatus 4 }
-
-emsStatusOutputRelayCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of Output Relays that
- is supported by this device."
- ::= { emsStatus 5 }
-
-emsStatusOutletCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of AC Outlets that
- is supported by this device."
- ::= { emsStatus 6 }
-
-emsStatusSensorCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of Sensors that
- is supported by this device."
- ::= { emsStatus 7 }
-
-emsStatusAlinkAruDeviceCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of remote Aru's supported by this device."
- ::= { emsStatus 8 }
-
-emsStatusAlinkProbeDeviceCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of remote T/H probes supported by this device."
- ::= { emsStatus 9 }
-
-emsStatusAlarmDeviceCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of alarm devices supported by this device."
- ::= { emsStatus 10 }
-
-emsStatusSysTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- in the system, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { emsStatus 11 }
-
-emsStatusCheckLogLight OBJECT-TYPE
- SYNTAX INTEGER {
- lightOff (1),
- lightOn (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the check-log light on the device.
- For the EMU2, this will always indicate lightOff(1).
-
- lightOff (1) indicates the light is off (no new log entries).
- lightOn (2) indicates the light is on (new log entries present)."
-
- ::= { emsStatus 12 }
-
-emsStatusHardwareStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the EMS hardware. This integer should be interpreted
- as a bit map, with each bit representing the presence or absence of
- a specific hardware error condition.
-
- 0 indicates there are no error conditions detected in the EMS hardware.
- 1 indicates a Current Limit error condition related to the Alink port.
- 2 indicates incorrect hardware is plugged into an EMS port.
- 3 indicates that both of these error conditions are present."
-
- ::= { emsStatus 13 }
-
--- EMS PROBE STATUS TABLE
-
-emsProbeStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSProbeStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual probes. The number of
- entries is contained in the emsStatusProbeCount OID."
- ::= { emsProbeStatus 1 }
-
-emsProbeStatusEntry OBJECT-TYPE
- SYNTAX EMSProbeStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The probes to access."
- INDEX { emsProbeStatusProbeIndex }
- ::= { emsProbeStatusTable 1 }
-
-EMSProbeStatusEntry ::=
- SEQUENCE {
- emsProbeStatusProbeIndex INTEGER,
- emsProbeStatusProbeName DisplayString,
- emsProbeStatusProbeTemperature INTEGER,
- emsProbeStatusProbeHighTempThresh INTEGER,
- emsProbeStatusProbeLowTempThresh INTEGER,
- emsProbeStatusProbeHumidity INTEGER,
- emsProbeStatusProbeHighHumidityThresh INTEGER,
- emsProbeStatusProbeLowHumidityThresh INTEGER,
- emsProbeStatusProbeSerialNumber DisplayString,
- emsProbeStatusProbeCommStatus INTEGER,
- emsProbeStatusProbeAlarmStatus INTEGER,
- emsProbeStatusProbeMaxTempThresh INTEGER,
- emsProbeStatusProbeMinTempThresh INTEGER,
- emsProbeStatusProbeMaxHumidityThresh INTEGER,
- emsProbeStatusProbeMinHumidityThresh INTEGER
- }
-
-emsProbeStatusProbeIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the probe entry."
- ::= { emsProbeStatusEntry 1 }
-
-emsProbeStatusProbeName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the probe."
- ::= { emsProbeStatusEntry 2 }
-
-emsProbeStatusProbeTemperature OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe temperature reading.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeStatusEntry 3 }
-
-emsProbeStatusProbeHighTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe high temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeStatusEntry 4 }
-
-emsProbeStatusProbeLowTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe low temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeStatusEntry 5 }
-
-emsProbeStatusProbeHumidity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe humidity reading.
-
- Values are represented in whole number percentage."
- ::= { emsProbeStatusEntry 6 }
-
-emsProbeStatusProbeHighHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe high humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeStatusEntry 7 }
-
-emsProbeStatusProbeLowHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe low humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeStatusEntry 8 }
-
-emsProbeStatusProbeSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A label indicating the type (Local[L] or Remote[R]) and Number
- of the probe. For example, the first local probe would be L1 and
- the third remote probe would be R3."
- ::= { emsProbeStatusEntry 9 }
-
-emsProbeStatusProbeCommStatus OBJECT-TYPE
- SYNTAX INTEGER {
- commsNeverDiscovered(1),
- commsEstablished(2),
- commsLost(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- " The state of communications to the probe.
- commNeverDiscovered(1) indicates there has never been communications with this device.
- commsEstablished(2) indicates communication is normal and active with this device.
- commsLost(3) indicates communication had been established, but is no longer."
- ::= { emsProbeStatusEntry 10 }
-
-emsProbeStatusProbeAlarmStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The alarm status of the probe. This integer should be interpreted
- as a bit map, with each bit representing the presence or absence of
- the specific alarm conditions listed below. The bit will be '1' if
- the condition is present, and '0' if the condition is not present.
-
- Bit Hex. Value Description
- 1 0x0001 Maximum temperature exceeded.
- 2 0x0002 High temperature exceeded.
- 3 0x0004 Low temperature exceeded.
- 4 0x0008 Minimum temperature exceeded.
- 5 0x0010 Short-term increasing temperature rate exceeded.
- 6 0x0020 Short-term decreasing temperature rate exceeded.
- 7 0x0040 Long-term increasing temperature rate exceeded.
- 8 0x0080 Long-term decreasing temperature rate exceeded.
- 9 0x0100 Maximum humidity exceeded.
- 10 0x0200 High humidity exceeded.
- 11 0x0400 Low humidity exceeded.
- 12 0x0800 Minimum humidity exceeded."
- ::= { emsProbeStatusEntry 11 }
-
-emsProbeStatusProbeMaxTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe maximum temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeStatusEntry 12 }
-
-emsProbeStatusProbeMinTempThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe minimum temperature threshold.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the emsStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { emsProbeStatusEntry 13 }
-
-emsProbeStatusProbeMaxHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe maximum humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeStatusEntry 14 }
-
-emsProbeStatusProbeMinHumidityThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Probe minimum humidity threshold.
-
- Values are represented in whole number percentage."
- ::= { emsProbeStatusEntry 15 }
-
-
--- EMS INPUT CONTACT STATUS TABLE
-
-emsInputContactStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSInputContactStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual input contacts. The number of
- entries is contained in the emsStatusInputContactCount OID."
- ::= { emsInputContactStatus 1 }
-
-emsInputContactStatusEntry OBJECT-TYPE
- SYNTAX EMSInputContactStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The input contacts to access."
- INDEX { emsInputContactStatusInputContactIndex }
- ::= { emsInputContactStatusTable 1 }
-
-EMSInputContactStatusEntry ::=
- SEQUENCE {
- emsInputContactStatusInputContactIndex INTEGER,
- emsInputContactStatusInputContactName DisplayString,
- emsInputContactStatusInputContactState INTEGER,
- emsInputContactStatusInputContactNormalState INTEGER
- }
-
-emsInputContactStatusInputContactIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the input contact entry."
- ::= { emsInputContactStatusEntry 1 }
-
-emsInputContactStatusInputContactName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the input contact."
- ::= { emsInputContactStatusEntry 2 }
-
-emsInputContactStatusInputContactState OBJECT-TYPE
- SYNTAX INTEGER {
- contactClosedEMS (1),
- contactOpenEMS (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the state of the input contact. If
- the input contact is closed, the contactClosedEMS (1) value will be returned.
- If the input contact state is open, the contactOpenEMS (2) value will be
- returned. "
-
- ::= { emsInputContactStatusEntry 3 }
-
-emsInputContactStatusInputContactNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyClosedEMS (1),
- normallyOpenEMS (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the input contact. If
- the normal state is closed, the normallyClosedEMS (1) value will be returned.
- If the normal state is open, the normallyOpenEMS (2) value will be
- returned. "
-
- ::= { emsInputContactStatusEntry 4 }
-
-
--- EMS OUTPUT RELAY STATUS TABLE
-
-emsOutputRelayStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSOutputRelayStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual output relays. The number of
- entries is contained in the emsStatusOutputRelayCount OID."
- ::= { emsOutputRelayStatus 1 }
-
-emsOutputRelayStatusEntry OBJECT-TYPE
- SYNTAX EMSOutputRelayStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The output relays to access."
- INDEX { emsOutputRelayStatusOutputRelayIndex }
- ::= { emsOutputRelayStatusTable 1 }
-
-EMSOutputRelayStatusEntry ::=
- SEQUENCE {
- emsOutputRelayStatusOutputRelayIndex INTEGER,
- emsOutputRelayStatusOutputRelayName DisplayString,
- emsOutputRelayStatusOutputRelayState INTEGER,
- emsOutputRelayStatusOutputRelayNormalState INTEGER
- }
-
-emsOutputRelayStatusOutputRelayIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the output relay entry."
- ::= { emsOutputRelayStatusEntry 1 }
-
-emsOutputRelayStatusOutputRelayName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the output relay."
- ::= { emsOutputRelayStatusEntry 2 }
-
-emsOutputRelayStatusOutputRelayState OBJECT-TYPE
- SYNTAX INTEGER {
- relayClosedEMS (1),
- relayOpenEMS (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the state of the output relay. If
- the output relay is closed, the relayClosedEMS (1) value will be returned.
- If the output relay is open, the relayOpenEMS (2) value will be
- returned. "
-
- ::= { emsOutputRelayStatusEntry 3 }
-
-emsOutputRelayStatusOutputRelayNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyClosedEMS (1),
- normallyOpenEMS (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the output relay. If
- the normal state is closed, the normallyClosedEMS (1) value will be returned.
- If the normal state is open, the normallyOpenEMS (2) value will be
- returned. "
-
- ::= { emsOutputRelayStatusEntry 4 }
-
--- EMS OUTLET STATUS TABLE
-
-emsOutletStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSOutletStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual outlets. The number of
- entries is contained in the emsStatusOutletCount OID."
- ::= { emsOutletStatus 1 }
-
-emsOutletStatusEntry OBJECT-TYPE
- SYNTAX EMSOutletStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The outlets to access."
- INDEX { emsOutletStatusOutletIndex }
- ::= { emsOutletStatusTable 1 }
-
-EMSOutletStatusEntry ::=
- SEQUENCE {
- emsOutletStatusOutletIndex INTEGER,
- emsOutletStatusOutletName DisplayString,
- emsOutletStatusOutletState INTEGER,
- emsOutletStatusOutletNormalState INTEGER
- }
-
-emsOutletStatusOutletIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the outlet entry."
- ::= { emsOutletStatusEntry 1 }
-
-emsOutletStatusOutletName OBJECT-TYPE
- SYNTAX DisplayString ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the outlet."
- ::= { emsOutletStatusEntry 2 }
-
-emsOutletStatusOutletState OBJECT-TYPE
- SYNTAX INTEGER {
- outletOnEMS (1),
- outletOffEMS (2)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the state of the outlet. If
- the outlet is on, the outletOnEMS (1) value will be returned.
- If the outlet is off, the outletOffEMS (2) value will be
- returned. "
-
- ::= { emsOutletStatusEntry 3 }
-
-emsOutletStatusOutletNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyOnEMS (1),
- normallyOffEMS (2)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the outlet. If
- the normal state is on, the normallyOnEMS (1) value will be returned.
- If the normal state is off, the normallyOffEMS (2) value will be
- returned. "
-
- ::= { emsOutletStatusEntry 4 }
-
--- EMS ALARM DEVICE STATUS TABLE
-
-emsAlarmDeviceStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSAlarmDeviceStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual alarm devices. The number of
- entries is contained in the emsStatusAlarmDeviceCount OID."
- ::= { emsAlarmDeviceStatus 1 }
-
-emsAlarmDeviceStatusEntry OBJECT-TYPE
- SYNTAX EMSAlarmDeviceStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The alarm devices to access."
- INDEX { emsAlarmDeviceStatusDeviceIndex }
- ::= { emsAlarmDeviceStatusTable 1 }
-
-EMSAlarmDeviceStatusEntry ::=
- SEQUENCE {
- emsAlarmDeviceStatusDeviceIndex INTEGER,
- emsAlarmDeviceStatusDeviceName DisplayString,
- emsAlarmDeviceStatusDeviceState INTEGER
- }
-
-emsAlarmDeviceStatusDeviceIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the alarm device entry."
- ::= { emsAlarmDeviceStatusEntry 1 }
-
-emsAlarmDeviceStatusDeviceName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the alarm device.
- This OID is provided for informational purposes only."
- ::= { emsAlarmDeviceStatusEntry 2 }
-
-emsAlarmDeviceStatusDeviceState OBJECT-TYPE
- SYNTAX INTEGER {
- alarmDeviceOnEMS (1),
- alarmDeviceOffEMS (2),
- alarmDeviceNotInstalledEMS (3)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the device state. If
- the device is active, the alarmDeviceOnEMS (1) value will be returned.
- If the device is inactive, the alarmDeviceOffEMS (2) value will be
- returned. If the device is not installed, the
- alarmDeviceNotInstalledEMS (3) value will be returned."
-
- ::= { emsAlarmDeviceStatusEntry 3 }
-
-
--- EMS SENSOR STATUS TABLE
-
-emsSensorStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EMSSensorStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual sensors. The number of
- entries is contained in the emsStatusSensorCount OID."
- ::= { emsSensorStatus 1 }
-
-emsSensorStatusEntry OBJECT-TYPE
- SYNTAX EMSSensorStatusEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The sensors to access."
- INDEX { emsSensorStatusSensorIndex }
- ::= { emsSensorStatusTable 1 }
-
-EMSSensorStatusEntry ::=
- SEQUENCE {
- emsSensorStatusSensorIndex INTEGER,
- emsSensorStatusSensorSystemName DisplayString,
- emsSensorStatusSensorName DisplayString,
- emsSensorStatusSensorState INTEGER,
- emsSensorStatusSensorNormalState INTEGER,
- emsSensorStatusSensorAlarmDelay INTEGER
- }
-
-emsSensorStatusSensorIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the sensor entry."
- ::= { emsSensorStatusEntry 1 }
-
-emsSensorStatusSensorSystemName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system name of the sensor. This describes the hardware system
- intent of this sensor."
- ::= { emsSensorStatusEntry 2 }
-
-emsSensorStatusSensorName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the sensor as given by the system user."
- ::= { emsSensorStatusEntry 3 }
-
-emsSensorStatusSensorState OBJECT-TYPE
- SYNTAX INTEGER {
- sensorFaultedEMS (1),
- sensorOKEMS (2),
- sensorNotInstalledEMS (3)
- }
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the sensor state. If the sensor is faulted,
- the sensorFaultedEMS (1) value will be returned.
- If the sensor is not faulted, the sensorOKEMS (2) value will be
- returned. If the sensor is not installed, the sensorNotInstalledEMS (3)
- value will be returned."
- ::= { emsSensorStatusEntry 4 }
-
-emsSensorStatusSensorNormalState OBJECT-TYPE
- SYNTAX INTEGER {
- normallyClosedEMS (1),
- normallyOpenEMS (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "Getting this variable will return the normal state of the sensor. If
- the normal state is closed, the normallyClosedEMS (1) value will be returned.
- If the normal state is closed, the normallyOpenEMS (2) value will be
- returned."
- ::= { emsSensorStatusEntry 5 }
-
-emsSensorStatusSensorAlarmDelay OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The delay (in seconds) after a sensor detects an alarm condition before the
- condition is reported."
- ::= { emsSensorStatusEntry 6 }
-
-
-
--- airFM AIR CONDITIONER IDENT
-
-airFMIdentName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- device. "
- ::= { airFMIdent 1 }
-
-airFMIdentTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the airFMIdentTable. "
- ::= { airFMIdent 2 }
-
-airFMIdentTable OBJECT-TYPE
- SYNTAX SEQUENCE OF AirFMIdentTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting identification information
- from each module in the system. "
- ::= { airFMIdent 3 }
-
-airFMIdentTableEntry OBJECT-TYPE
- SYNTAX AirFMIdentTableEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The module to get information from."
- INDEX { airFMIdentModuleIndex }
- ::= { airFMIdentTable 1 }
-
-AirFMIdentTableEntry ::=
- SEQUENCE {
- airFMIdentModuleIndex INTEGER,
- airFMIdentModuleModelNumber DisplayString,
- airFMIdentModuleDateOfMfg DisplayString,
- airFMIdentModuleSerialNumber DisplayString,
- airFMIdentModuleFirmwareRev DisplayString,
- airFMIdentModuleHardwareRev DisplayString
- }
-
-airFMIdentModuleIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the module information."
- ::= { airFMIdentTableEntry 1 }
-
-airFMIdentModuleModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- model number. "
- ::= { airFMIdentTableEntry 2 }
-
-airFMIdentModuleDateOfMfg OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- manufacture date. "
- ::= { airFMIdentTableEntry 3 }
-
-airFMIdentModuleSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- unit serial number. "
- ::= { airFMIdentTableEntry 4 }
-
-airFMIdentModuleFirmwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- firmware revision. "
- ::= { airFMIdentTableEntry 5 }
-
-airFMIdentModuleHardwareRev OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- hardware revision. "
- ::= { airFMIdentTableEntry 6 }
-
--- airFM AIR CONDITIONER STATUS
-
-airFMStatusSystemOn OBJECT-TYPE
- SYNTAX INTEGER {
- statusOn (1),
- statusOff (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The operating state of the system. "
- ::= { airFMStatus 1 }
-
-airFMStatusSystemAverageRetTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system average return air
- temperature in tenths of degrees Celsius. "
- ::= { airFMStatus 2 }
-
-airFMStatusSystemAverageRetTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system average return air
- temperature in tenths of degrees Fahrenheit. "
- ::= { airFMStatus 3 }
-
-airFMStatusSystemAverageRetHum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system average return air
- humidity. "
- ::= { airFMStatus 4 }
-
-airFMStatusSystemActionTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system action air
- temperature in tenths of degrees Celsius. "
- ::= { airFMStatus 5 }
-
-airFMStatusSystemActionTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system action air
- temperature in tenths of degrees Fahrenheit. "
- ::= { airFMStatus 6 }
-
-airFMStatusSystemActionHum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system action air humidity. "
- ::= { airFMStatus 7 }
-
-airFMStatusSystemRemoteHighTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote high air
- temperature in tenths of degrees Celsius. "
- ::= { airFMStatus 8 }
-
-airFMStatusSystemRemoteHighTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote high air
- temperature in tenths of degrees Fahrenheit. "
- ::= { airFMStatus 9 }
-
-airFMStatusSystemRemoteAvgTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote average air
- temperature in tenths of degrees Celsius. "
- ::= { airFMStatus 10 }
-
-airFMStatusSystemRemoteAvgTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote average air
- temperature in tenths of degrees Fahrenheit. "
- ::= { airFMStatus 11 }
-
-airFMStatusSystemRemoteAvgHum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote average air
- humidity. "
- ::= { airFMStatus 12 }
-
-airFMStatusSystemRemoteLowTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote low air
- temperature in tenths of degrees Celsius. "
- ::= { airFMStatus 13 }
-
-airFMStatusSystemRemoteLowTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The system remote low air
- temperature in tenths of degrees Fahrenheit. "
- ::= { airFMStatus 14 }
-
-airFMStatusSystemCoolingEnabled OBJECT-TYPE
- SYNTAX INTEGER {
- enabledYes (1),
- enabledNo (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The state of the system cooling
- function enable. "
- ::= { airFMStatus 15 }
-
-airFMStatusSystemReheatingEnabled OBJECT-TYPE
- SYNTAX INTEGER {
- enabledYes (1),
- enabledNo (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The state of the system reheating
- function enable. "
- ::= { airFMStatus 16 }
-
-airFMStatusSystemHumidifyEnabled OBJECT-TYPE
- SYNTAX INTEGER {
- enabledYes (1),
- enabledNo (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The state of the system humidify
- function enable. "
- ::= { airFMStatus 17 }
-
-airFMStatusSystemDehumidifyEnabled OBJECT-TYPE
- SYNTAX INTEGER {
- enabledYes (1),
- enabledNo (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The state of the system dehumidify
- function enable. "
- ::= { airFMStatus 18 }
-
-airFMStatusModuleTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of entries in the airFMStatusModuleTable. "
- ::= { airFMStatus 19 }
-
-airFMStatusModuleTable OBJECT-TYPE
- SYNTAX SEQUENCE OF AirFMStatusModuleEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for getting information from each module
- in the system. "
- ::= { airFMStatus 20 }
-
-airFMStatusModuleEntry OBJECT-TYPE
- SYNTAX AirFMStatusModuleEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The module to get status from."
- INDEX { airFMStatusModuleIndex }
- ::= { airFMStatusModuleTable 1 }
-
-AirFMStatusModuleEntry ::=
- SEQUENCE {
- airFMStatusModuleIndex INTEGER,
- airFMStatusModuleOutputCapacity INTEGER,
- airFMStatusModuleSupplyTempC INTEGER,
- airFMStatusModuleSupplyTempF INTEGER,
- airFMStatusModuleSupplyHum INTEGER,
- airFMStatusModuleReturnTempC INTEGER,
- airFMStatusModuleReturnTempF INTEGER,
- airFMStatusModuleReturnHum INTEGER
- }
-
-airFMStatusModuleIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the module information."
- ::= { airFMStatusModuleEntry 1 }
-
-airFMStatusModuleOutputCapacity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module output capacity in kilowatts."
- ::= { airFMStatusModuleEntry 2 }
-
-airFMStatusModuleSupplyTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module supply air temperature in
- tenths of degrees Celsius. "
- ::= { airFMStatusModuleEntry 3 }
-
-airFMStatusModuleSupplyTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module supply air temperature in
- tenths of degrees Fahrenheit. "
- ::= { airFMStatusModuleEntry 4 }
-
-airFMStatusModuleSupplyHum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module supply air humidity. "
- ::= { airFMStatusModuleEntry 5 }
-
-airFMStatusModuleReturnTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module return air temperature in
- tenths of degrees Celsius. "
- ::= { airFMStatusModuleEntry 6 }
-
-airFMStatusModuleReturnTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module return air temperature in
- tenths of degrees Fahrenheit. "
- ::= { airFMStatusModuleEntry 7 }
-
-airFMStatusModuleReturnHum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The module return air humidity. "
- ::= { airFMStatusModuleEntry 8 }
-
--- airFM AIR CONDITIONER GROUP DATA
-
-airFMGroupSysStatus OBJECT-TYPE
- SYNTAX INTEGER {
- statusOnLine (1),
- statusIdle (2),
- statusLoadShare (3),
- statusOffLine (4),
- statusFailed (5)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of this system within the group. "
- ::= { airFMGroup 1 }
-
-airFMGroupSysRuntime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of hours the system has been running. "
- ::= { airFMGroup 2 }
-
-airFMGroupSysRole OBJECT-TYPE
- SYNTAX INTEGER {
- rolePrimary (1),
- roleBackup (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The role of this system within the group. "
- ::= { airFMGroup 3 }
-
--- airPA Portable Air Conditioner Ident
-
-airPAIdentName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the device name. "
- ::= { airPAIdent 1 }
-
-airPAModelNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the device model number. "
- ::= { airPAIdent 2 }
-
-airPADateOfManufacture OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying when the device was produced. "
- ::= { airPAIdent 3 }
-
-airPASerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the device serial number. "
- ::= { airPAIdent 4 }
-
-airPAFirmwareRevision OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the device firmware revision. "
- ::= { airPAIdent 5 }
-
-airPAHardwareRevision OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the device hardware revision. "
- ::= { airPAIdent 6 }
-
--- airPA Portable Air Conditioner Status
-
-airPASystemPower OBJECT-TYPE
- SYNTAX INTEGER {
- powerON (1),
- powerOFF (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The status of the unit's system power setting.
-
- ON(1) The system power is turned on.
- OFF(2) The system power is turned off. "
- ::= { airPAStatus 1 }
-
-airPAOperatingMode OBJECT-TYPE
- SYNTAX INTEGER {
- modeOFF (1),
- modeVENTING (2),
- modeCOOLING (3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The current operating mode of the unit.
-
- OFF(1) The system is off.
- VENTING(2) The system's venting function is active.
- COOLING(3) The system's cooling function is active. "
- ::= { airPAStatus 2 }
-
-airPASetpointTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature setpoint in Fahrenheit to which the unit is controlling. "
- ::= { airPAStatus 3 }
-
-airPASetpointTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature setpoint in Celsius to which the unity is controlling. "
- ::= { airPAStatus 4 }
-
-airPABlowerSpeed OBJECT-TYPE
- SYNTAX INTEGER {
- speedLOW (1),
- speedHIGH (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The unit's blower speed setting.
-
- LOW(1) The blower speed is low.
- HIGH(2) The blower speed is high. "
- ::= { airPAStatus 5 }
-
-airPACompressor OBJECT-TYPE
- SYNTAX INTEGER {
- statusON (1),
- statusOFF (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The unit's compressor status.
-
- ON(1) The compressor is turned on.
- OFF(2) The compressor is turned off. "
- ::= { airPAStatus 6 }
-
-airPACondenserFan OBJECT-TYPE
- SYNTAX INTEGER {
- statusON (1),
- statusOFF (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The unit's condenser fan status.
-
- ON(1) The condenser fan is turned on.
- OFF(2) The condenser fan is turned off. "
- ::= { airPAStatus 7 }
-
-airPACondensatePump OBJECT-TYPE
- SYNTAX INTEGER {
- statusON (1),
- statusOFF (2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The unit's condensate pump status.
-
- ON(1) The condensate pump is turned on.
- OFF(2) The condensate pump is turned off. "
- ::= { airPAStatus 8 }
-
-airPASupplyTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The supply temperature in degrees Fahrenheit. "
- ::= { airPAStatus 9 }
-
-airPASupplyTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The supply temperature in degrees Celsius. "
- ::= { airPAStatus 10 }
-
-airPAReturnTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The return temperature in degrees Fahrenheit. "
- ::= { airPAStatus 11 }
-
-airPAReturnTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The return temperature in degrees Celsius. "
- ::= { airPAStatus 12 }
-
-airPARemoteTempF OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The remote temperature in degrees Fahrenheit. "
- ::= { airPAStatus 13 }
-
-airPARemoteTempC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The remote temperature in degrees Celsius. "
- ::= { airPAStatus 14 }
-
-airPARemoteHumidity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The remote humidity. "
- ::= { airPAStatus 15 }
-
--- RACK AIR REMOVAL UNIT IDENT
-
-rARUIdentTable OBJECT-TYPE
- SYNTAX SEQUENCE OF IdentRARUEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for query of the individual devices.
- The number of entries is contained in the
- rARUStatusAruDeviceCount OID."
- ::= { rARUIdent 1 }
-
-rARUIdentEntry OBJECT-TYPE
- SYNTAX IdentRARUEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The device to query."
- INDEX { rARUIdentIndex}
- ::= { rARUIdentTable 1 }
-
-IdentRARUEntry ::=
- SEQUENCE {
- rARUIdentIndex INTEGER,
- rARUIdentName DisplayString
- }
-
-rARUIdentIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the device entry."
- ::= { rARUIdentEntry 1 }
-
-rARUIdentName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A character string identifying the
- device. "
- ::= { rARUIdentEntry 2 }
-
-
--- RACK AIR REMOVAL UNIT CONFIGURATION
-
-rARUConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ConfigRARUEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for configuration of individual ARUs. The number of
- entries is contained in the rARUStatusAruDeviceCount OID."
- ::= { rARUConfig 1 }
-
-rARUConfigEntry OBJECT-TYPE
- SYNTAX ConfigRARUEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The ARUs to configure."
- INDEX { rARUConfigAruIndex }
- ::= { rARUConfigTable 1 }
-
-ConfigRARUEntry ::=
- SEQUENCE {
- rARUConfigAruIndex INTEGER,
- rARUConfigAruName DisplayString,
- rARUConfigAruRemoteSetpoint INTEGER,
- rARUConfigAruTempOvrdEnableDisable INTEGER,
- rARUConfigAruTempOvrdSetpoint INTEGER
- }
-
-rARUConfigAruIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the device entry."
- ::= { rARUConfigEntry 1 }
-
-rARUConfigAruName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The name of the ARU."
- ::= { rARUConfigEntry 2 }
-
-rARUConfigAruRemoteSetpoint OBJECT-TYPE
- SYNTAX INTEGER {
- aruOff (1),
- aru85F-29C (2),
- aru90F-32C (3),
- aru95F-35C (4),
- aru100F-38C (5),
- aru7kW (6),
- aru5kW (7),
- aru3kW (8),
- aru2kW (9)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID is the Remote setpoint of the ARU.
- NOTE: -1 will be returned if the ARU is not communicating."
-
- ::= { rARUConfigEntry 3 }
-
-rARUConfigAruTempOvrdEnableDisable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID is used to enable/disable the remote temperature override setting of the ARU.
-
- If this OID is set to 1, the remote setting for temperature override is disabled.
- If this OID is set to 2, the remote setting for temperature override is enabled."
- ::= { rARUConfigEntry 4 }
-
-rARUConfigAruTempOvrdSetpoint OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This OID is the Temperature Override setpoint of the ARU.
- NOTE: -1 will be returned if the ARU is not communicating."
-
- ::= { rARUConfigEntry 5 }
-
--- RACK AIR REMOVAL UNIT STATUS
-
-rARUStatusAruDeviceCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of ARUs accessible from this IP."
- ::= { rARUStatus 1 }
-
-rARUStatusSysTempUnits OBJECT-TYPE
- SYNTAX INTEGER {
- celsius(1),
- fahrenheit(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The temperature scale used to display the temperature
- in the system, Celsius(1) or Fahrenheit(2).
- This setting is based on the system preferences
- configuration in the agent."
- ::= { rARUStatus 2 }
-
-rARUStatusTable OBJECT-TYPE
- SYNTAX SEQUENCE OF StatusRARUEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Allows for access of individual ARUs. The number of
- entries is contained in the rARUStatusAruDeviceCount OID."
- ::= { rARUStatus 3 }
-
-rARUStatusEntry OBJECT-TYPE
- SYNTAX StatusRARUEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "The ARUs to access."
- INDEX { rARUStatusAruIndex }
- ::= { rARUStatusTable 1 }
-
-StatusRARUEntry ::=
- SEQUENCE {
- rARUStatusAruIndex INTEGER,
- rARUStatusAruName DisplayString,
- rARUStatusAruRemoteSetpoint INTEGER,
- rARUStatusAruManualSetpoint INTEGER,
- rARUStatusAruTemp1 INTEGER,
- rARUStatusAruTemp2 INTEGER,
- rARUStatusAruTemp3 INTEGER,
- rARUStatusAruTempOvrdEnableDisable INTEGER,
- rARUStatusAruTempOvrdSetpoint INTEGER,
- rARUStatusAruAlarmState DisplayString,
- rARUStatusAruCommStatus INTEGER
- }
-
-rARUStatusAruIndex OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index to the ARU entry."
- ::= { rARUStatusEntry 1 }
-
-rARUStatusAruName OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The name of the ARU."
- ::= { rARUStatusEntry 2 }
-
-rARUStatusAruRemoteSetpoint OBJECT-TYPE
- SYNTAX INTEGER {
- aruOff (1),
- aru85F-29C (2),
- aru90F-32C (3),
- aru95F-35C (4),
- aru100F-38C (5),
- aru7kW (6),
- aru5kW (7),
- aru3kW (8),
- aru2kW (9)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "ARU remote setpoint temperature setting.
-
- NOTE: -1 will be returned if the ARU is not communicating.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { rARUStatusEntry 3 }
-
-rARUStatusAruManualSetpoint OBJECT-TYPE
- SYNTAX INTEGER {
- aruOff (1),
- aru85F-29C (2),
- aru90F-32C (3),
- aru95F-35C (4),
- aru100F-38C (5),
- aru7kW (6),
- aru5kW (7),
- aru3kW (8),
- aru2kW (9),
- aruRem (10)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "ARU manual setpoint temperature setting.
-
- NOTE: -1 will be returned if the ARU is not communicating.
-
- Values are represented in whole number degrees.
- If the manual setpoint is set to Remote, this OID will return 0.
- Units are displayed in the scale shown in
- the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { rARUStatusEntry 4 }
-
-rARUStatusAruTemp1 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "ARU temperature probe #1 reading.
-
- NOTE: -1 will be returned if the ARU is not communicating.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { rARUStatusEntry 5 }
-
-rARUStatusAruTemp2 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "ARU temperature probe #2 reading.
-
- NOTE: -1 will be returned if the ARU is not communicating.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { rARUStatusEntry 6 }
-
-rARUStatusAruTemp3 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "ARU temperature probe #3 reading.
-
- NOTE: -1 will be returned if the ARU is not communicating.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { rARUStatusEntry 7 }
-
-rARUStatusAruTempOvrdEnableDisable OBJECT-TYPE
- SYNTAX INTEGER {
- disabled(1),
- enabled(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This OID indicates whether the ARU remote temperature override is enabled or disabled.
- If this OID is a 1, the remote setting for temperature override is disabled.
- If this OID is a 2, the remote setting for temperature override is enabled."
- ::= { rARUStatusEntry 8 }
-
-rARUStatusAruTempOvrdSetpoint OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "ARU remote temperature override setpoint setting.
-
- NOTE: -1 will be returned if the ARU is not communicating.
-
- Values are represented in whole number degrees.
- Units are displayed in the scale shown in
- the rARUStatusSysTempUnits OID (Celsius or Fahrenheit)."
- ::= { rARUStatusEntry 9 }
-
-rARUStatusAruAlarmState OBJECT-TYPE
- SYNTAX DisplayString
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An ASCII string containing the 8 flags representing
- the current alarm state of the ARU. If the state of
- the ARU is unknown, this variable is set to �UNKNOWN�.
-
- The flags are numbered 1 to 8, read from left to
- right. The flags are defined as follows:
-
- Flag 1: Fan Fail 1
- Flag 2: Fan Fail 2
- Flag 3: Fan Fail 3
- Flag 4: Smoke
-
- Flag 5: High Temp (Out of Thermal Control)
- Flag 6: Over Temp (Exhaust Temp. Exceeds Override Setpoint)
- Flag 7: Reserved
- Flag 8: Reserved"
- ::= { rARUStatusEntry 10 }
-
-rARUStatusAruCommStatus OBJECT-TYPE
- SYNTAX INTEGER {
- commsNeverDiscovered(1),
- commsEstablished(2),
- commsLost(3)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The state of communications to the device.
- commNeverDiscovered(1) indicates there has never been communications with this device.
- commsEstablished(2) indicates communication is normal and active with this device.
- commsLost(3) indicates communication had been established, but is no device."
- ::= { rARUStatusEntry 11 }
-
--- Traps
--- Annotations are provided for Novell's NMS product
---
--- Each trap has at least one variable (mtrapargsString) which always appears
--- as the last variable in the list. This variable contains either a static
--- or dynamically-constructed string which provides an enhanced description of
--- the trap's purpose and any pertinent information about the trap.
-
-communicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Communication to the UPS has been lost. Steps
- to reestablish communication are in progress."
- --#TYPE "APC UPS: Communication lost"
- --#SUMMARY "Communication lost between the agent and the UPS."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 1
-
-upsOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: The UPS has sensed a load greater than 100 percent
- of its rated capacity."
- --#TYPE "APC UPS: Overload"
- --#SUMMARY "The UPS has sensed a load greater than 100 percent of its rated capacity."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 2
-
-upsDiagnosticsFailed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: The UPS failed its internal diagnostic self-test."
- --#TYPE "APC UPS: Failed self-test"
- --#SUMMARY "The UPS has failed its internal self-test."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 3
-
-upsDischarged TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: The UPS batteries are discharged; if utility power fails
- an immediate low battery condition will exist. Sufficient runtime
- for necessary action cannot be guaranteed."
- --#TYPE "APC UPS: batteries are discharged"
- --#SUMMARY "The UPS batteries are discharged."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 4
-
-upsOnBattery TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS has switched to battery backup power."
- --#TYPE "APC UPS: On battery"
- --#SUMMARY "The UPS has switched to battery backup power."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 5
-
-smartBoostOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS has enabled SmartBoost(TM)."
- --#TYPE "APC UPS: SmartBoost(TM)"
- --#SUMMARY "The UPS has enabled SmartBoost(TM); low incoming line voltage."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 6
-
-lowBattery TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: The UPS batteries are low and will soon be exhausted.
- If utility power is not restored the UPS will put itself
- to 'sleep' and immediately cut power to the load."
- --#TYPE "APC UPS: Low battery"
- --#SUMMARY "The UPS system's batteries are low and will soon be exhausted."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 7
-
-communicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communication with the UPS has been established."
- --#TYPE "APC UPS: Communication established"
- --#SUMMARY "UPS communication has been established."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 8
-
-powerRestored TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Utility power has been restored."
- --#TYPE "APC UPS: Utility power restored"
- --#SUMMARY "Returned from battery backup power; utility power restored."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 9
-
-upsDiagnosticsPassed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The UPS passed its internal self-test."
- --#TYPE "APC UPS: Passed self-test"
- --#SUMMARY "The UPS passed internal self-test."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 10
-
-returnFromLowBattery TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The UPS has returned from a low battery
- condition."
- --#TYPE "APC UPS: Returned from Low-Battery condition"
- --#SUMMARY "The UPS has returned from a Low-Battery condition."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 11
-
-upsTurnedOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS has been turned 'off' by the management station."
- --#TYPE "APC UPS: Turned off"
- --#SUMMARY "The UPS has been switched off by a management station."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 12
-
-upsSleeping TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS is entering 'sleep' mode. Power
- to the load will be cut off."
- --#TYPE "APC UPS: Entered sleep mode"
- --#SUMMARY "The UPS entered sleep mode. Power to the load will be cut off."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 13
-
-upsWokeUp TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATION: The UPS has returned from 'sleep' mode. Power
- to the load has been restored."
- --#TYPE "APC UPS: Wake up"
- --#SUMMARY "The UPS has returned from sleep mode. Power to the load has been restored."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 14
-
-upsRebootStarted TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS has started its reboot sequence.
- The UPS will reboot itself at this time."
- --#TYPE "APC UPS: Starting reboot"
- --#SUMMARY "The UPS has started its reboot sequence."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 15
-
-upsDipSwitchChanged TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The dip switch settings on the UPS have been
- changed, possibly altering UPS performance."
- --#TYPE "APC UPS: DIP switch altered"
- --#SUMMARY "The DIP switch settings on the UPS have been changed."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 16
-
-upsBatteryNeedsReplacement TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: The batteries of the UPS need immediate replacement."
- --#TYPE "APC UPS: UPS batteries need replacement"
- --#SUMMARY "The UPS batteries require immediate replacement."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 17
-
-
--- the Environmental Monitor traps
-
-contactFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: One of the contacts on the Environmental Monitor has
- changed from its default position. The first variable is
- the contact number that is faulted."
- --#TYPE "APC Environment: Contact fault"
- --#SUMMARY "An Environment contact closure has faulted."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 18
-
-contactFaultResolved TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A fault on one of the Environmental Monitor contacts
- has been resolved. The first variable is
- the contact number that has been resolved."
- --#TYPE "APC Environment: Contact fault cleared."
- --#SUMMARY "A Environment contact closure has returned to it's default state."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 19
-
--- the Matrix-UPS traps
-
-hardwareFailureBypass TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: UPS on bypass due to internal fault"
- --#TYPE "APC UPS: On bypass due to internal fault"
- --#SUMMARY "The UPS is on bypass due to an internal fault."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 20
-
-softwareBypass TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: UPS on bypass - user set via software or panel"
- --#TYPE "APC UPS: On bypass by user via software or panel"
- --#SUMMARY "UPS put on bypass by user via software or front UPS panel."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 21
-
-switchedBypass TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: UPS on bypass - initiated by user"
- --#TYPE "APC UPS: On bypass initiated by user"
- --#SUMMARY "UPS put on bypass by user."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 22
-
-returnFromBypass TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: UPS has returned from bypass"
- --#TYPE "APC UPS: UPS has returned from bypass"
- --#SUMMARY "The UPS has returned from bypass mode."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 23
-
-bypassPowerSupplyFailure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Base module bypass power supply needs repair"
- --#TYPE "APC UPS: Base module bypass power supply needs repair"
- --#SUMMARY "The base module bypass power supply needs repair."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 24
-
-baseFanFailure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Base module fan needs repair"
- --#TYPE "APC UPS: Base module fan needs repair"
- --#SUMMARY "The base module fan needs repair."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 25
-
-batteryPackCommLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Check installation of external battery packs signal cable"
- --#TYPE "APC UPS: Communication lost with battery packs"
- --#SUMMARY "Communication lost with external battery packs, check battery signal cable."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 26
-
-batteryPackCommEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: UPS is communicating with the external battery packs."
- --#TYPE "APC UPS: Communication established with battery packs"
- --#SUMMARY "Communication established with external battery packs."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 27
-
-calibrationStart TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A battery calibration test has been initiated on the UPS."
- --#TYPE "APC UPS: Calibration initiated"
- --#SUMMARY "A battery run time calibration test has been initiated."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 28
-
--- Misc. Traps
-
-restartAgent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Agent restarting as commanded by manager."
- --#TYPE "APC SNMP Agent: Agent restarting"
- --#SUMMARY "Agent restarting as commanded by manager."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 29
-
-upsTurnedOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A UPS is turned on."
- --#TYPE "APC UPS: A UPS is turned on."
- --#SUMMARY " A UPS is turned on."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 30
-
-smartAvrReducing TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS is reducing the line voltage via SmartTrim(TM)."
- --#TYPE "APC UPS: SmartTrim(TM) reducing"
- --#SUMMARY "The UPS has enabled SmartTrim(TM) voltage reduction."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 31
-
-codeAuthenticationDone TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mconfigTFTPServerIP, newCodeAuthentViaTFTP }
- DESCRIPTION
- "INFORMATIONAL: Authentication on agent code image is done."
- --#TYPE "APC CODE: Authentication on agent code image is done."
- --#SUMMARY "Authentication on agent code image is done."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 32
-
-upsOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The overload condition has been cleared."
- --#TYPE "APC UPS: Overload cleared."
- --#SUMMARY "The overload condition has been cleared. ."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 33
-
-smartBoostOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The UPS has returned from SmartBoost(TM)."
- --#TYPE "APC UPS: SmartBoost(TM) off."
- --#SUMMARY "The UPS has returned from SmartBoost(TM)."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 34
-
-smartAvrReducingOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The UPS has returned from SmartTrim(TM)."
- --#TYPE "APC UPS: SmartTrim(TM) reducing off"
- --#SUMMARY "The UPS has returned from SmartTrim(TM) voltage reduction."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 35
-
-upsBatteryReplaced TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A bad battery fault has been cleared."
- --#TYPE "APC UPS: Bad battery replaced"
- --#SUMMARY "The UPS has returned from a bad battery fault."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 36
-
-calibrationEnd TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The UPS has finished calibrating."
- --#TYPE "APC UPS: Calibration end"
- --#SUMMARY "The UPS has finished calibrating"
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 37
-
-dischargeCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A UPS discharge condition has been cleared."
- --#TYPE "APC UPS: Discharge cleared."
- --#SUMMARY "The UPS discharge condition has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 38
-
-gracefullShutdown TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A graceful shutdown has been initiated."
- --#TYPE "APC UPS: A graceful shutdown has been initiated."
- --#SUMMARY "A graceful shutdown has been initiated."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 39
-
-
-outletOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUOutletControlIndex }
- DESCRIPTION
- "WARNING: The specified PDU outlet has turned on.
- If sPDUOutletControlIndex equals zero, then all outlets have
- turned on."
- --#TYPE "APC PDU: Outlet has been turned on."
- --#SUMMARY "Outlet has been turned on"
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 41
-
-
-outletOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUOutletControlIndex }
- DESCRIPTION
- "WARNING: The specified PDU outlet has turned off.
- If sPDUOutletControlIndex equals zero, then all outlets
- have turned off."
- --#TYPE "APC PDU: Outlet has turned off."
- --#SUMMARY "Outlet has turned off."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 42
-
-outletReboot TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUOutletControlIndex }
- DESCRIPTION
- "WARNING: The specified PDU outlet has rebooted.
- If sPDUOutletControlIndex equals zero, then all outlets
- have rebooted."
- --#TYPE "APC PDU: Outlet has rebooted."
- --#SUMMARY "Outlet has rebooted."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 43
-
-configChangeSNMP TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The SNMP configuration has been changed."
- --#TYPE "APC: The SNMP configuration has been changed."
- --#SUMMARY "The SNMP configuration has been changed."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 44
-
-
-configChangeOutlet TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUOutletConfigIndex }
- DESCRIPTION
- "WARNING: The specified PDU outlet has changed configuration.
- If sPDUOutletConfigIndex equals zero, then the Master outlet
- has changed configuration."
- --#TYPE "APC PDU: Outlet configuration has been changed."
- --#SUMMARY "Outlet configuration has been changed."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 45
-
-accessViolationConsole TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: Someone has attempted to login via the console with the incorrect password."
- --#TYPE "APC: Access violation via the console."
- --#SUMMARY "Three unsuccessful logins have been attempted via the console."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 46
-
-accessViolationHTTP TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: Someone has attempted to login via HTTP with the incorrect password."
- --#TYPE "APC: Access violation via HTTP."
- --#SUMMARY "An unsuccessful attempt to login via HTTP."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 47
-
-passwordChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The password for the device has been changed."
- --#TYPE "APC: Password change for the device."
- --#SUMMARY "Someone has changed the password on the device."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 48
-
-badVoltage TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The output voltage is not within acceptable range."
- --#TYPE "APC UPS: Bad output voltage."
- --#SUMMARY "The output voltage is not within acceptable range."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 49
-
-badVoltageCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The output voltage has returned to an acceptable level."
- --#TYPE "APC UPS: The bad voltage output condition has been cleared."
- --#SUMMARY "The output voltage has returned to an acceptable level."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 50
-
-chargerFailure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The battery charger has failed."
- --#TYPE "APC UPS: The battery charger has failed."
- --#SUMMARY "The battery charger has failed."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 51
-
-chargerFailureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The battery charger failure condition has been cleared."
- --#TYPE "APC UPS: The battery charger failure condition cleared"
- --#SUMMARY "The battery charger failure condition has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 52
-
-batteryOverTemperature TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The battery temperature threshold has been violated."
- --#TYPE "APC UPS: The battery temperature threshold has been violated."
- --#SUMMARY "The battery temperature threshold has been violated."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 53
-
-batteryOverTemperatureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The battery over temperature has been cleared."
- --#TYPE "APC UPS: The battery over temperature has been cleared."
- --#SUMMARY "The battery over temperature has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 54
-
- smartRelayFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: SmartBoost(TM) or SmartTrim(TM) relay fault."
- --#TYPE "APC UPS: SmartBoost(TM) or SmartTrim(TM) relay fault."
- --#SUMMARY "SmartBoost(TM) or SmartTrim(TM) relay fault."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 55
-
-smartRelayFaultCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: SmartBoost(TM) or SmartTrim(TM) relay fault has been cleared."
- --#TYPE "APC UPS: SmartBoost(TM) or SmartTrim(TM) relay fault cleared."
- --#SUMMARY "SmartBoost(TM) or SmartTrim(TM) relay fault has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 56
-
-humidityThresholdViolation1 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Probe 1 humidity threshold violated. The
- first variable is the current humidity."
- --#TYPE "APC Environmental Monitor: Probe 1 humidity threshold violation"
- --#SUMMARY "A humidity threshold has been violated on probe 1."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 57
-
-humidityThresholdViolationCleared1 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Environmental Monitor humidity threshold violation has been cleared on probe 1."
- --#TYPE "APC Environmental Monitor: Probe 1 humidity violation cleared"
- --#SUMMARY "A humidity threshold violation has been cleared on probe 1."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 58
-
-temperatureThresholdViolation1 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: An Environmental Monitor temperature threshold has been violated on probe 1.
- The first variable is the current temperature."
- --#TYPE "APC Environmental Monitor: Probe 1 temperature violation"
- --#SUMMARY "A temperature threshold has been violated on probe 1."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 59
-
-temperatureThresholdViolationCleared1 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Environmental Monitor temperature threshold violation has been cleared on probe 1."
- --#TYPE "APC Environmental Monitor: Probe 1 temperature violation cleared"
- --#SUMMARY "A temperature threshold violation has been cleared on probe 1."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 60
-
-humidityThresholdViolation2 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: An Environmental Monitor humidity threshold has been violated on probe 2.
- The first variable is the current humidity."
- --#TYPE "APC Environmental Monitor: Probe 2 humidity violation"
- --#SUMMARY "A humidity threshold has been violated on probe 2."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 61
-
-humidityThresholdViolationCleared2 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Environmental Monitor humidity threshold violation has been cleared on probe 2."
- --#TYPE "APC Environmental Monitor: Probe 2 humidity violation cleared"
- --#SUMMARY "A humidity threshold violation has been cleared on probe 2."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 62
-
-temperatureThresholdViolation2 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: An Environmental Monitor temperature threshold has been violated on probe 2.
- The first variable is the current temperature."
- --#TYPE "APC Environmental Monitor: Probe 2 temperature violation"
- --#SUMMARY "A temperature threshold has been violated on probe 2."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 63
-
-temperatureThresholdViolationCleared2 TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Environmental Monitor temperature threshold violation has been cleared on probe 2."
- --#TYPE "APC Environmental Monitor: Probe 2 temperature violation cleared"
- --#SUMMARY "A temperature threshold violation has been cleared on probe 2."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 64
-
-mupsCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communication with the Environmental Monitor has been established."
- --#TYPE "APC Environmental Monitor: Communication established"
- --#SUMMARY "Communication established between the agent and the Environmental Monitor."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 65
-
-mupsCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Communication to the Environmental Monitor has been lost. Steps
- to reestablish communication are in progress."
- --#TYPE "APC Environmental Monitor: Communication failure"
- --#SUMMARY "Communication lost between the agent and the Environmental Monitor."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 66
-
-batteryIncrease TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The number of batteries has increased."
- --#TYPE "APC UPS: The number of batteries has increased."
- --#SUMMARY "The number of batteries has increased."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 67
-
-batteryDecrease TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The number of batteries has decreased."
- --#TYPE "APC UPS: The number of batteries has decreased."
- --#SUMMARY "The number of batteries has decreased."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 68
-
-powerModuleIncrease TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The number of power modules has increased."
- --#TYPE "APC UPS: The number of power modules has increased."
- --#SUMMARY "The number of power modules has increased."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 69
-
-powerModuleDecrease TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The number of power modules has decreased."
- --#TYPE "APC UPS: The number of power modules has decreased."
- --#SUMMARY "The number of power modules has decreased."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 70
-
-intelligenceModuleInserted TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An intelligence module has been inserted."
- --#TYPE "APC UPS: An intelligence module has been inserted."
- --#SUMMARY "An intelligence module has been inserted."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 71
-
-intelligenceModuleRemoved TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An intelligence module has been removed."
- --#TYPE "APC UPS: An intelligence module has been removed."
- --#SUMMARY "An intelligence module has been removed."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 72
-
-rintelligenceModuleInserted TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A redundant intelligence module has been inserted."
- --#TYPE "APC UPS: A redundant intelligence module has been inserted."
- --#SUMMARY "A redundant intelligence module has been inserted."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 73
-
-rintelligenceModuleRemoved TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A redundant intelligence module has been removed."
- --#TYPE "APC UPS: A redundant intelligence module has been removed."
- --#SUMMARY "A redundant intelligence module has been removed."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 74
-
-extBatteryFrameIncease TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An external battery frame has been added."
- --#TYPE "APC UPS: An external battery frame has been added."
- --#SUMMARY "An external battery frame has been added."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 75
-
-extBatteryFrameDecrease TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An external battery frame has been removed."
- --#TYPE "APC UPS: An external battery frame has been removed."
- --#SUMMARY "An external battery frame has been removed."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 76
-
-abnormalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: An abnormal condition has been detected.
- The first variable is the fault condition."
- --#TYPE "APC: An abnormal condition has been detected."
- --#SUMMARY "An abnormal condition has been detected."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 77
-
-abnormalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An abnormal condition has been cleared.
- The first variable is the fault condition."
- --#TYPE "APC: An abnormal condition has been cleared."
- --#SUMMARY "An abnormal condition has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 78
-
-deviceStatusChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString}
- DESCRIPTION
- "INFORMATIONAL: The status of the device being monitored has changed."
- --#TYPE "APC : The status of the device being monitored has changed."
- --#SUMMARY "The status of the device being monitored has changed."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 79
-
-noBatteries TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The UPS has no batteries attached."
- --#TYPE "APC UPS: No batteries attached."
- --#SUMMARY "The UPS has no batteries attached."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 80
-
-noBatteriesCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The UPS's batteries have been attached."
- --#TYPE "APC UPS: The no batteries attached condition has been cleared."
- --#SUMMARY "The UPS's batteries have been attached."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 81
-
-userAdded TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A new user has been added."
- --#TYPE "APC: A new user has been added."
- --#SUMMARY "A new user has been added."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 82
-
-userDeleted TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A user has been deleted."
- --#TYPE "APC: A user has been deleted."
- --#SUMMARY "A user has been deleted."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 83
-
-userModified TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A user has been modified."
- --#TYPE "APC: A user has been modified."
- --#SUMMARY "A user has been modified."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 84
-
--- MasterSwitch Vm Traps
-
-msvmCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communications with the MasterSwitch VM has been established."
- --#TYPE "APC: Communications established with the MasterSwitch VM."
- --#SUMMARY "Communications with the MasterSwitch VM has been established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 85
-
-msvmCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Communications with the MasterSwitch VM has been lost."
- --#TYPE "APC: Communications lost with the MasterSwitch VM."
- --#SUMMARY "Communications with the MasterSwitch VM has been lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 86
-
-msvmOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The MasterSwitch VM in an overload condition."
- --#TYPE "APC: The MasterSwitch VM is near or at an overload condition."
- --#SUMMARY "The MasterSwitch VM is near or at an overload condition."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 87
-
-msvmOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The overload condition on the MasterSwitch VM has been cleared."
- --#TYPE "APC: The overload condition cleared on the MasterSwitch VM."
- --#SUMMARY "The overload condition on the MasterSwitch VM has been cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 88
-
-msvmOutletOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName,
- sPDUOutletControlVMOutletIndex, sPDUOutletControlVMOutletName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on the MasterSwitch VM has turned on."
- --#TYPE "APC: An outlet on the MasterSwitch VM has turned on."
- --#SUMMARY "An outlet on the MasterSwitch VM has turned on."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 89
-
-msvmOutletOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName,
- sPDUOutletControlVMOutletIndex, sPDUOutletControlVMOutletName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on the MasterSwitch VM has turned off."
- --#TYPE "APC: An outlet on the MasterSwitch VM has turned off."
- --#SUMMARY "An outlet on the MasterSwitch VM has turned off."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 90
-
-msvmDeviceConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A device configuration change has been made on a MasterSwitch VM."
- --#TYPE "APC: A device configuration change on a MasterSwitch VM."
- --#SUMMARY "A device configuration change has been made on a MasterSwitch VM."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 91
-
-msvmOutletConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName,
- sPDUOutletControlVMOutletIndex, sPDUOutletControlVMOutletName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet configuration change has been made on a MasterSwitch VM."
- --#TYPE "APC: An outlet configuration change on a MasterSwitch VM."
- --#SUMMARY "An outlet configuration change has been made on a MasterSwitch VM."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 92
-
-msvmLowLoad TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The MasterSwitch VM has violated the low load threshold."
- --#TYPE "APC: The MasterSwitch VM has violated the low load threshold."
- --#SUMMARY "The MasterSwitch VM has violated the low load threshold."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 93
-
-msvmLowLoadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The low load condition on the MasterSwitch VM has been cleared."
- --#TYPE "APC: The low load condition cleared on the MasterSwitch VM."
- --#SUMMARY "The low load condition on the MasterSwitch VM has been cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 94
-
-msvmNearOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The MasterSwitch VM is approaching an overload condition."
- --#TYPE "APC: The MasterSwitch VM is near or at an overload condition."
- --#SUMMARY "The MasterSwitch VM is near or at an overload condition."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 95
-
-msvmNearOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The near overload condition on the MasterSwitch VM has been cleared."
- --#TYPE "APC: The overload condition cleared on the MasterSwitch VM."
- --#SUMMARY "The overload condition on the MasterSwitch VM has been cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 96
-
-msvmPowerSupplyStatusChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlVMIndex, sPDUMasterControlVMName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: The power supply status of the MasterSwitch VM has changed."
- --#TYPE "APC: The power supply status changed on MasterSwitch VM"
- --#SUMMARY "The power supply status of the MasterSwitch VM has changed."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 97
-
--- MasterSwitch plus (MSP) Traps
-
-mspCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communications with the MasterSwitch plus has been established."
- --#TYPE "APC: Communications established with the MasterSwitch plus."
- --#SUMMARY "Communications with the MasterSwitch plus has been established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 98
-
-mspCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Communications with the MasterSwitch plus has been lost."
- --#TYPE "APC: Communications lost with the MasterSwitch plus."
- --#SUMMARY "Communications with the MasterSwitch plus has been lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 99
-
-mspOutletOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName,
- sPDUOutletControlMSPOutletIndex, sPDUOutletControlMSPOutletName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on the MasterSwitch plus has turned on."
- --#TYPE "APC: An outlet on the MasterSwitch plus has turned on."
- --#SUMMARY "An outlet on the MasterSwitch plus has turned on."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 100
-
-mspOutletOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName,
- sPDUOutletControlMSPOutletIndex, sPDUOutletControlMSPOutletName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on the MasterSwitch plus has turned off."
- --#TYPE "APC: An outlet on the MasterSwitch plus has turned off."
- --#SUMMARY "An outlet on the MasterSwitch plus has turned off."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 101
-
-mspDeviceConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A device configuration change has been made on a MasterSwitch plus."
- --#TYPE "APC: A device configuration change on a MasterSwitch plus."
- --#SUMMARY "A device configuration change has been made on a MasterSwitch plus."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 102
-
-mspOutletConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { sPDUMasterControlMSPIndex, sPDUMasterControlMSPName, sPDUOutletControlMSPOutletIndex, sPDUOutletControlMSPOutletName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet configuration change has been made on a MasterSwitch plus."
- --#TYPE "APC: An outlet configuration change on a MasterSwitch plus."
- --#SUMMARY "An outlet configuration change has been made on a MasterSwitch plus."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 103
-
-rsSourceSwitched TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger02, mtrapargsString03, mtrapargsInteger, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The Redundant Switch has switched source.
- The first variable is an integer representing the current source: 0=A, 1=B.
- The second variable is the 32-character name of the current source.
- The third variable is an integer representing the transfer cause:
- 0=No Transfers Recorded, 1=Due to user action or preferred switching,
- 3=Due to line notch or spike, 5=Due to low line voltage,
- 7=Transfer due to high line voltage,
- 9=Transfer due to frequency out of range.
- The fourth variable is a character string listing the transfer cause."
- --#TYPE "APC Redundant Switch: The Redundant Switch has switched source"
- --#SUMMARY "The Redundant Switch has switched source."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 104
-
-rsLostRedundancy TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: The Redundant Switch has lost redundancy.
- The first variable is an integer representing the source which is no longer available: 0=A, 1=B.
- The second variable is the 32-character name of the source which is no longer available."
- --#TYPE "APC Redundant Switch: The Redundant Switch has lost redundancy"
- --#SUMMARY "The Redundant Switch has has lost redundancy."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 105
-
-rsRedundancyRestored TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Redundancy has been restored to the Redundant Switch .
- The first variable is an integer representing the source which has been restored: 0=A, 1=B.
- The second variable is the 32-character name of the source which has been restored."
- --#TYPE "APC Redundant Switch: Redundancy has been restored."
- --#SUMMARY "Redundancy has been restored to the Redundant Switch ."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 106
-
-rsConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A configuration change has been made on a Redundant Switch."
- --#TYPE "APC: A configuration change on a Redundant Switch."
- --#SUMMARY "A configuration change has been made on a Redundant Switch."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 107
-
-rsCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communications with the Redundant Switch has been established."
- --#TYPE "APC: Communications established with the Redundant Switch."
- --#SUMMARY "Communications with the Redundant Switch has been established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 108
-
-rsCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Communications with the Redundant Switch has been lost."
- --#TYPE "APC: Communications lost with the Redundant Switch."
- --#SUMMARY "Communications with the Redundant Switch has been lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 109
-
-dcCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communications with the DC power plant has been established."
- --#TYPE "APC: Communications established with the DC power plant."
- --#SUMMARY "Communications with the DC power plant has been established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 110
-
-dcCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Communications with the DC power plant has been lost."
- --#TYPE "APC: Communications lost with the DC power plant."
- --#SUMMARY "Communications with the DC power plant has been lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 111
-
-dcPINChanged TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The active PIN on the DC controller has been changed."
- --#TYPE "APC: The active PIN on the DC controller has been changed."
- --#SUMMARY "The active PIN on the DC controller has been changed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 112
-
-dcMajorAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: A Major alarm is active in the DC power plant."
- --#TYPE "APC: A Major alarm is active in the DC power plant."
- --#SUMMARY "A Major alarm is active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 113
-
-dcMajorAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Major alarm is no longer active in the DC power plant."
- --#TYPE "APC: A Major alarm is no longer active in the DC power plant."
- --#SUMMARY "A Major alarm is no longer active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 114
-
-dcMinorAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Minor alarm is active in the DC power plant."
- --#TYPE "APC: A Minor alarm is active in the DC power plant."
- --#SUMMARY "A Minor alarm is active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 115
-
-dcMinorAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Minor alarm is no longer active in the DC power plant."
- --#TYPE "APC: A Minor alarm is no longer active in the DC power plant."
- --#SUMMARY "A Minor alarm is no longer active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 116
-
-dcOutputRelayOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { dm3StatusOutRlyIndex, dm3StatusOutRlyName, mtrapargsString }
- DESCRIPTION
- "WARNING: An output relay for the powerplant has been activated (state changed to on).
- The first variable is an integer representing the output relay number that has gone on.
- The second variable is the 16-character name of the output relay."
- --#TYPE "APC: An output relay has gone on."
- --#SUMMARY "An output relay has gone on in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 117
-
-dcOutputRelayOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { dm3StatusOutRlyIndex, dm3StatusOutRlyName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An output relay for the powerplant has been deactivated (state changed to off).
- The first variable is an integer representing the output relay number that has gone off.
- The second variable is the 16-character name of the output relay."
- --#TYPE "APC: An output relay has gone off."
- --#SUMMARY "An output relay has gone off in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 118
-
-dcInputRelayOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { dm3StatusInRlyIndex, dm3StatusInRlyName, mtrapargsString }
- DESCRIPTION
- "WARNING: An input relay for the powerplant has been activated (state changed to on).
- The first variable is an integer representing the input relay number that has gone on.
- The second variable is the 16-character name of the input relay."
- --#TYPE "APC: An input relay has gone on."
- --#SUMMARY "An input relay has gone on in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 119
-
-dcInputRelayOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { dm3StatusInRlyIndex, dm3StatusInRlyName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An input relay for the powerplant has been deactivated (state changed to off).
- The first variable is an integer representing the input relay number that has gone off.
- The second variable is the 16-character name of the input relay."
- --#TYPE "APC: An input relay has gone off."
- --#SUMMARY "An input relay has gone off in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 120
-
-logicPowerSuppliesIncreased TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The number of system power supplies has increased."
- --#TYPE "APC UPS: The number of system power supplies has increased."
- --#SUMMARY "The number of system power supplies has increased."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 121
-
-logicPowerSuppliesDecreased TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The number of system power supplies has decreased."
- --#TYPE "APC UPS: The number of system power supplies has decreased."
- --#SUMMARY "The number of system power supplies has decreased."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 122
-
-externalSwitchGearClosed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: External Switch Gear closed."
- --#TYPE "APC UPS: External Switch Gear closed."
- --#SUMMARY "External Switch Gear closed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 123
-
-externalSwitchGearOpened TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: External Switch Gear opened."
- --#TYPE "APC UPS: External Switch Gear opened."
- --#SUMMARY "External Switch Gear opened."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 124
-
-generalDeviceEvent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: APC Device event."
- --#TYPE "APC Device event"
- --#SUMMARY "APC Device event."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 125
-
-atsSourceSwitched TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The Automatic Transfer Switch has switched source.
- The first variable is an integer representing the current source: 0=A, 1=B.
- The second variable is the 32-character name of the current source."
- --#TYPE "APC Automatic Transfer Switch: The ATS has switched source"
- --#SUMMARY "The Automatic Transfer Switch has switched source."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 126
-
-atsLostRedundancy TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: The Automatic Transfer Switch has lost redundancy.
- The first variable is an integer representing the source which is no longer available: 0=A, 1=B.
- The second variable is the 32-character name of the source which is no longer available."
- --#TYPE "APC Automatic Transfer Switch: The ATS has lost redundancy. "
- --#SUMMARY "The Automatic Transfer Switch has has lost redundancy."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 127
-
-atsRedundancyRestored TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Redundancy has been restored to the Automatic Transfer Switch .
- The first variable is an integer representing the source which has been restored: 0=A, 1=B.
- The second variable is the 32-character name of the source which has been restored."
- --#TYPE "APC Automatic Transfer Switch: Redundancy has been restored."
- --#SUMMARY "Redundancy has been restored to the Automatic Transfer Switch ."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 128
-
-atsConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A configuration change has been made on the Automatic Transfer Switch.
- The first variable is an integer representing the configuration setting which changed:
- 0=Transfer Voltage Range, 1=Sensitivity 2=Preferred Source
- 3=Front Panel Lockout 4=Current Limit"
- --#TYPE "APC Automatic Transfer Switch: ATS configuration changed."
- --#SUMMARY "A configuration change has been made on a Automatic Transfer Switch."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 129
-
-atsCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communications with the Automatic Transfer Switch has been established."
- --#TYPE "APC Automatic Transfer Switch: Communications established."
- --#SUMMARY "Communications with the Automatic Transfer Switch has been established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 130
-
-atsCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Communications with the Automatic Transfer Switch has been lost."
- --#TYPE "APC Automatic Transfer Switch: Communications lost."
- --#SUMMARY "Communications with the Automatic Transfer Switch has been lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 131
-
-atsOverCurrent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Output Current has exceeded threshold."
- --#TYPE "APC Automatic Transfer Switch: Output Current exceeded threshold"
- --#SUMMARY "Output Current has exceeded Threshold. "
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 132
-
-atsOverCurrentCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Output Current has returned below threshold."
- --#TYPE "APC Automatic Transfer Switch: Output Current below threshold."
- --#SUMMARY "Output Current has returned below threshold."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 133
-
-atsPowerSupplyFailure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The Automatic Transfer Switch Power Supply has failed.
- The first variable is an integer representing the Power Supply which
- has failed: 0=24V, 1=12V 2=5V."
- --#TYPE "APC Automatic Transfer Switch: The ATS Power Supply has failed."
- --#SUMMARY "The Automatic Transfer Switch Power Supply has failed."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 134
-
-atsPowerSupplyFailureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The Automatic Transfer Power Supply Failure Cleared.
- The first variable is an integer representing the Power Supply which
- has cleared: 0=24V, 1=12V 2=5V."
- --#TYPE "APC Automatic Transfer Switch: Power Supply Failure Cleared."
- --#SUMMARY "The Automatic Transfer Switch Power Supply Failure Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 135
-
-dcMainsFailAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Mains Fail alarm is active in the DC power plant."
- --#TYPE "APC: A Mains Fail alarm is active in the DC power plant."
- --#SUMMARY "A Mains Fail alarm is active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 136
-
-dcMainsFailAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Mains Fail alarm is no longer active in the DC power plant."
- --#TYPE "APC: Mains Fail alarm is no longer active in the DC power plant."
- --#SUMMARY "Mains Fail alarm is no longer active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 137
-
-dcFanFailAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Fan Fail alarm is active in the DC power plant."
- --#TYPE "APC: A Fan Fail alarm is active in the DC power plant."
- --#SUMMARY "A Fan Fail alarm is active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 138
-
-dcFanFailAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Fan Fail alarm is no longer active in the DC power plant."
- --#TYPE "APC: A Fan Fail alarm is no longer active in the DC power plant."
- --#SUMMARY "A Fan Fail alarm is no longer active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 139
-
-dcRectifierOvertempAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: Rect. Overtemp alarm is active in the power plant."
- --#TYPE "APC: Rect. Overtemp alarm is active in the power plant."
- --#SUMMARY "Rect. Overtemp alarm is active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 140
-
-dcRectifierOvertempAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Rect. Overtemp alarm is no longer active in the power plant."
- --#TYPE "APC: Rect. Overtmp alarm is no longer active in the power plant."
- --#SUMMARY "Rect. Overtmp alarm is no longer active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 141
-
-dcCurrentLimitAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Current Limit alarm is active in the power plant."
- --#TYPE "APC: A Current Limit alarm is active in the power plant."
- --#SUMMARY "A Current Limit alarm is active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 142
-
-dcCurrentLimitAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Current Limit alarm is no longer active in the power plant."
- --#TYPE "APC: Current Limit alarm is no longer active in the power plant."
- --#SUMMARY "Current Limit alarm is no longer active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 143
-
-dcRectifierFailAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Rect. Fail alarm is active in the power plant."
- --#TYPE "APC: A Rect. Fail alarm is active in the power plant."
- --#SUMMARY "A Rect. Fail alarm is active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 144
-
-dcRectifierFailAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Rect. Fail alarm is no longer active in the power plant."
- --#TYPE "APC: Rect. Fail alarm is no longer active in the power plant."
- --#SUMMARY "Rect. Fail alarm is no longer active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 145
-
-dcMultRectFailAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: Multiple Rect. Fail alarm is active in the powerplant."
- --#TYPE "APC: Multiple Rect. Fail alarm is active in the powerplant."
- --#SUMMARY "Multiple Rect. Fail alarm is active in the powerplant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 146
-
-dcMultRectFailAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Mult Rect Fail alarm is no longer active in the powerplant."
- --#TYPE "APC: Mult Rect Fail alarm is no longer active in the powerplant."
- --#SUMMARY "Mult Rect Fail alarm is no longer active in the powerplant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 147
-
-dcBatteryBreakerAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: Batt. Breaker alarm is active in the power plant."
- --#TYPE "APC: Batt. Breaker alarm is active in the power plant."
- --#SUMMARY "Batt. Breaker alarm is active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 148
-
-dcBatteryBreakerAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Batt. Breaker alarm is no longer active in the power plant."
- --#TYPE "APC: Batt. Breaker alarm is no longer active in the power plant."
- --#SUMMARY "Batt. Breaker alarm is no longer active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 149
-
-dcRectifierOVPAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Rect. OVP alarm is active in the power plant."
- --#TYPE "APC: A Rect. OVP alarm is active in the power plant."
- --#SUMMARY "A Rect. OVP alarm is active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 150
-
-dcRectifierOVPAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Rect. OVP alarm is no longer active in the power plant."
- --#TYPE "APC: A Rect. OVP alarm is no longer active in the power plant."
- --#SUMMARY "A Rect. OVP alarm is no longer active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 151
-
-dcLVDImminentAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A LVD Imminent alarm is active in the powerplant."
- --#TYPE "APC: A LVD Imminent alarm is active in the powerplant."
- --#SUMMARY "A LVD Imminent alarm is active in the powerplant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 152
-
-dcLVDImminentAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A LVD Imminent alarm is no longer active in the powerplant."
- --#TYPE "APC: A LVD Imminent alarm is no longer active in the powerplant."
- --#SUMMARY "A LVD Imminent alarm is no longer active in the powerplant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 153
-
-dcFuseCBAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Fuse/CB alarm is active in the DC power plant."
- --#TYPE "APC: A Fuse/CB alarm alarm is active in the DC power plant."
- --#SUMMARY "A Fuse/CB alarm is active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 154
-
-dcFuseCBAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Fuse/CB alarm is no longer active in the DC power plant."
- --#TYPE "APC: A Fuse/CB alarm is no longer active in the DC power plant."
- --#SUMMARY "A Fuse/CB alarm is no longer active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 155
-
-dcBatteryTestFail TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Battery Test failed in the DC power plant."
- --#TYPE "APC: A Battery Test failed in the DC power plant."
- --#SUMMARY "A Battery Test failed in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 156
-
-dcTemperatureAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Temperature is active in the power plant."
- --#TYPE "APC: A Temperature alarm is active in the power plant."
- --#SUMMARY "A Temperature alarm is active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 157
-
-dcTemperatureAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Temperature alarm is no longer active in the power plant."
- --#TYPE "APC: A Temperature alarm is no longer active in the power plant."
- --#SUMMARY "A Temperature alarm is no longer active in the power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 158
-
-dcHumidityAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: A Humidity alarm is active in the DC power plant."
- --#TYPE "APC: A Humidity alarm is active in the DC power plant."
- --#SUMMARY "A Humidity alarm is active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 159
-
-dcHumidityAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Humidity alarm is no longer active in the DC power plant."
- --#TYPE "APC: A Humidity alarm is no longer active in the DC power plant."
- --#SUMMARY "A Humidity alarm is no longer active in the DC power plant."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 160
-
-dcBBCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Power plant bridging board communications established."
- --#TYPE "APC: Power plant bridging board communications established."
- --#SUMMARY "Power plant bridging board communications established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 161
-
-dcBBCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "SEVERE: Power plant bridging board communications lost."
- --#TYPE "APC: Power plant bridging board communications lost."
- --#SUMMARY "Power plant bridging board communications lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 162
-
-iemHighTempThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeCurrentTemp, iemStatusProbeTempUnits, iemStatusProbeNumber,
- iemStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: High temperature threshold violated on Integrated
- Environmental Monitor probe. The first variable is the
- current temperature. The second variable is the temperature
- scale. The third variable is the probe number. The fourth
- variable is the probe name."
- --#TYPE "APC IEM: High temperature threshold violation."
- --#SUMMARY "High temperature threshold violation."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 163
-
-iemHighTempThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: High temperature threshold violated on Integrated
- Environmental Monitor probe has been cleared. The first variable
- is the probe number. The second variable is the probe name."
- --#TYPE "APC IEM: High temperature threshold violation cleared."
- --#SUMMARY "High temperature threshold violation has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 164
-
-iemLowTempThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeCurrentTemp, iemStatusProbeTempUnits, iemStatusProbeNumber,
- iemStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Low temperature threshold violated on integrated
- probe. The first variable is the current temperature. The
- second variable is the temperature scale. The third
- variable is the probe number. The fourth variable is the
- probe name."
- --#TYPE "APC IEM: Low temperature threshold violation."
- --#SUMMARY "Low temperature threshold violation."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 165
-
-iemLowTempThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Low temperature threshold violated on integrated
- probe has been cleared. The first variable is the probe number.
- The second variable is the probe name."
- --#TYPE "APC IEM: Low temperature threshold violation cleared."
- --#SUMMARY "Low temperature threshold violation has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 166
-
-iemHighHumidThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeCurrentHumid, iemStatusProbeNumber, iemStatusProbeName,
- mtrapargsString }
- DESCRIPTION
- "SEVERE: High humidity threshold violated on integrated
- probe. The first variable is the current humidity. The
- second variable is the probe number. The third variable
- is the probe name."
- --#TYPE "APC IEM: High humidity threshold violation."
- --#SUMMARY "High humidity threshold violation."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 167
-
-iemHighHumidThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: High humidity threshold violated on integrated
- probe cleared. The first variable is the probe number. The second
- variable is the probe name."
- --#TYPE "APC IEM: High humidity threshold violation cleared."
- --#SUMMARY "High humidity threshold violation has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 168
-
-iemLowHumidThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeCurrentHumid, iemStatusProbeNumber, iemStatusProbeName,
- mtrapargsString }
- DESCRIPTION
- "SEVERE: Low humidity threshold violated on integrated
- probe. The first variable is the current humidity. The
- second variable is the probe number. The third variable
- is the probe name."
- --#TYPE "APC IEM: Low humidity threshold violation."
- --#SUMMARY "Low humidity threshold violation."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 169
-
-iemLowHumidThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusProbeNumber, iemStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Low humidity threshold violated on integrated
- probe cleared. The first variable is the probe number. The second
- variable is the probe name."
- --#TYPE "APC IEM: Low humidity threshold violation cleared."
- --#SUMMARY "Low humidity threshold violation has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 170
-
-iemProbeDisconnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The temperature/humidity probe on the Integrated
- Environmental Monitor has been disconnected. This trap is
- generated when a probe that has been in communication with
- the Environmental Monitor has been disconnected or can no
- longer communicate."
- --#TYPE "APC IEM: Probe disconnected."
- --#SUMMARY "Probe has been disconnected."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 171
-
-iemProbeConnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The temperature/humidity probe on the Integrated
- Environmental Monitor has been connected. This trap is generated
- when the Environmental Monitor establishes communication with a
- probe that had previously not been connected."
- --#TYPE "APC IEM: Probe Connected."
- --#SUMMARY "Probe has been connected."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 172
-
-iemContactFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusContactNumber, iemStatusContactName, mtrapargsString }
- DESCRIPTION
- "SEVERE: There is a contact fault on the Integrated
- Environmental Monitor. The first argument is the number
- of the contact. The second argument is the name of the
- contact."
- --#TYPE "APC IEM: Contact fault."
- --#SUMMARY "Contact fault."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 173
-
-iemContactFaultCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusContactNumber, iemStatusContactName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The contact fault on the Integrated
- Environmental Monitor has been cleared. The first
- argument is the number of the contact. The second
- argument is the name of the contact."
- --#TYPE "APC IEM: Contact fault."
- --#SUMMARY "Contact fault cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 174
-
-iemRelayFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusRelayNumber, iemStatusRelayName, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: The output relay on the Integrated Environmental
- Monitor has switched to the fault state. The first
- argument is the number of the output relay. The second
- argument is the name of the output relay. The third
- argument is the event that caused the fault."
- --#TYPE "APC IEM: Output relay fault."
- --#SUMMARY "Output relay has faulted."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 175
-
-iemRelayFaultCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { iemStatusRelayNumber, iemStatusRelayName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The fault condition on the output relay on the
- Integrated Environmental Monitor has cleared. The first
- argument is the number of the output relay. The second
- argument is the name of the output relay."
- --#TYPE "APC IEM: Output relay fault condition cleared."
- --#SUMMARY "Output relay fault cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 176
-
-bmBatManCommEstab TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Serial Communications Established with Battery Manager."
- --#TYPE "BatMan : Communications Established."
- --#SUMMARY "Communications Established."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 177
-
-bmBatManCommLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Serial Communications Lost with Battery Manager."
- --#TYPE "BatMan : Communications Lost."
- --#SUMMARY "Communications Lost."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 178
-
-bmBatManKneeAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Battery Voltage Knee Threshold Alarm Detected."
- --#TYPE "BatMan : Knee Alarm Detected."
- --#SUMMARY "Knee Alarm Detected."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 179
-
-bmBatManKneeAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Battery Voltage Knee Threshold Alarm Cleared."
- --#TYPE "BatMan : Knee Alarm Cleared."
- --#SUMMARY "Knee Alarm Cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 180
-
-bmBatManChargerAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: Charger Alarm Detected."
- --#TYPE "BatMan : Charger Alarm Detected."
- --#SUMMARY "Charger Alarm Detected."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 181
-
-bmBatManChargerAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Charger Alarm Cleared."
- --#TYPE "BatMan : Charger Alarm Cleared."
- --#SUMMARY "Charger Alarm Cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 182
-
-bmBatManBatteryAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: Battery Alarm Detected."
- --#TYPE "BatMan : Battery Alarm Detected."
- --#SUMMARY "Battery Alarm Detected."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 183
-
-bmBatManBatteryAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Battery Alarm Cleared."
- --#TYPE "BatMan : Battery Alarm Cleared."
- --#SUMMARY "Battery Alarm Cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 184
-
-bmBatManEnvironmentAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: Environment Alarm Detected."
- --#TYPE "BatMan : Environment Alarm Detected."
- --#SUMMARY "Environment Alarm Detected."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 185
-
-bmBatManEnvironmentAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Environment Alarm Cleared."
- --#TYPE "BatMan : Environment Alarm Cleared."
- --#SUMMARY "Environment Alarm Cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 186
-
-bmBatManMaintenanceAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Maintenance Alarm Detected."
- --#TYPE "BatMan : Maintenance Due Alarm Detected."
- --#SUMMARY "Maintenance Due Alarm Detected."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 187
-
-bmBatManMaintenanceAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Maintenance Alarm Cleared."
- --#TYPE "BatMan : Maintenance Due Alarm Cleared."
- --#SUMMARY "Maintenance Due Alarm Cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 188
-
-pduCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communication Established.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Communication Established."
- --#SUMMARY "Communication Established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 189
-
-pduCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: Communication Lost.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Communication Lost."
- --#SUMMARY "Communication Lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 190
-
-pduUtilityLineUndervoltage TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Utility Line Undervoltage.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Utility Line Undervoltage."
- --#SUMMARY "Utility Line Undervoltage."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 191
-
-pduUtilityLineUndervoltageCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Utility Line Undervoltage Cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Utility Line Undervoltage Cleared."
- --#SUMMARY "Utility Line Undervoltage Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 192
-
-pduUtilityLineOvervoltage TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Utility Line Overvoltage.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Utility Line Overvoltage."
- --#SUMMARY "Utility Line Overvoltage."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 193
-
-pduUtilityLineOvervoltageCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Utility Line Overvoltage Cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Utility Line Overvoltage Cleared."
- --#SUMMARY "Utility Line Overvoltage Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 194
-
-pduGroundOvercurrent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: Ground Overcurrent.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Ground Overcurrent."
- --#SUMMARY "Ground Overcurrent."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 195
-
-pduGroundOvercurrentCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Ground Overcurrent Cleared.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Ground Overcurrent Cleared."
- --#SUMMARY "Ground Overcurrent Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 196
-
-pduCircuitPanelInputUndervoltage TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Circuit Panel Input Undervoltage.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Undervoltage."
- --#SUMMARY "Circuit Panel Input Undervoltage."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 197
-
-pduCircuitPanelInputUndervoltageCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Circuit Panel Input Undervoltage Cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Undervoltage Cleared."
- --#SUMMARY "Circuit Panel Input Undervoltage Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 198
-
-pduCircuitPanelInputOvervoltage TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Circuit Panel Input Overvoltage.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Overvoltage."
- --#SUMMARY "Circuit Panel Input Overvoltage."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 199
-
-pduCircuitPanelInputOvervoltageCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Circuit Panel Input Overvoltage Cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Overvoltage Cleared."
- --#SUMMARY "Circuit Panel Input Overvoltage Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 200
-
-pduCircuitPanelInputUndercurrent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Circuit Panel Input Undercurrent.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Undercurrent."
- --#SUMMARY "Circuit Panel Input Undercurrent."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 201
-
-pduCircuitPanelInputUndercurrentCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Circuit Panel Input Undercurrent Cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Undercurrent Cleared."
- --#SUMMARY "Circuit Panel Input Undercurrent Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 202
-
-pduCircuitPanelInputOvercurrent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Circuit Panel Input Overcurrent.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Overcurrent."
- --#SUMMARY "Circuit Panel Input Overcurrent."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 203
-
-pduCircuitPanelInputOvercurrentCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Circuit Panel Input Overcurrent Cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: Circuit Panel Input Overcurrent Cleared."
- --#SUMMARY "Circuit Panel Input Overcurrent Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 204
-
-pduCircuitPanelFrequencyOutOfRange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: Circuit Panel Input Frequency Out Of Range.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Circuit Panel Input Frequency Out Of Range."
- --#SUMMARY "Circuit Panel Input Frequency Out Of Range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 205
-
-pduCircuitPanelFrequencyOutofRangeCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Circuit Panel Input Frequency No Longer Out Of Range.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Circuit Panel Input Frequency No Longer Out Of Range."
- --#SUMMARY "Circuit Panel Input Frequency No Longer Out Of Range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 206
-
-pduCircuitPanelNeutralOvercurrent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: Circuit Panel Input Neutral Overcurrent.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Circuit Panel Input Neutral Overcurrent."
- --#SUMMARY "Circuit Panel Input Neutral Overcurrent."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 207
-
-pduCircuitPanelNeutralOvercurrentCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Circuit Panel Input Neutral Overcurrent Cleared.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Circuit Panel Input Neutral Overcurrent Cleared."
- --#SUMMARY "Circuit Panel Input Neutral Overcurrent Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 208
-
-pduSystemOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: PDU System Off.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: System Off."
- --#SUMMARY "PDU System Off."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 209
-
-pduOnBatteryMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: PDU is in On Battery Mode.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: On Battery Mode."
- --#SUMMARY "PDU is in On Battery Mode."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 210
-
-pduMaintenanceBypassMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: PDU is in Maintenance Bypass Mode.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Maintenance Bypass Mode."
- --#SUMMARY "PDU is in Maintenance Bypass Mode."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 211
-
-pduAtypicalBypassMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "WARNING: PDU is in Atypical Bypass Mode.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Atypical Bypass Mode."
- --#SUMMARY "PDU is in Atypical Bypass Mode."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 212
-
-pduNoPanelFeedMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: PDU is in No Panel Feed Mode.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: No Panel Feed Mode."
- --#SUMMARY "PDU is in No Panel Feed Mode."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 213
-
-pduUpsOperationMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: PDU is in Ups Operation Mode.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Ups Operation Mode."
- --#SUMMARY "PDU is in Ups Operation Mode."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 214
-
-pduForcedBypassMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "WARNING: PDU is in Forced Bypass Mode.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Forced Bypass Mode."
- --#SUMMARY "PDU is in Forced Bypass Mode."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 215
-
-pduInputTransformerOverTemperature TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: Input Transformer Over Temperature.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Input Transformer Over Temperature."
- --#SUMMARY "Input Transformer Over Temperature."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 216
-
-pduInputTransformerOverTemperatureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Input Transformer Over Temperature Cleared.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC PDU: Input Transformer Over Temperature Cleared."
- --#SUMMARY "Input Transformer Over Temperature Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 217
-
-pduUPSInputVoltageLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: UPS Input Voltage phase-N Lost.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: UPS Input Voltage phase-N Lost."
- --#SUMMARY "UPS Input Voltage phase-N Lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 218
-
-pduUPSInputVoltageRestored TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: UPS Input Voltage phase-N Restored.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC PDU: UPS Input Voltage phase-N Restored."
- --#SUMMARY "UPS Input Voltage phase-N Restored."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 219
-
-pduContactFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: A contact closure in the PDU is in an abnormal position.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the number of the contact."
- --#TYPE "APC PDU: Contact Abnormal."
- --#SUMMARY "Contact Abnormal."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 220
-
-pduContactFaultCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A contact closure in the PDU is in a normal position.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the number of the contact."
- --#TYPE "APC PDU: Contact Normal."
- --#SUMMARY "Contact Normal."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 221
-
-rPDUBankPhaseLowLoad TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "WARNING: A bank or phase on the Rack PDU has violated the low load threshold.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the bank number (0 if this is phase data).
- The fourth argument is the phase number (0 if this is bank data)."
- --#TYPE "APC Rack PDU: Violation of bank or phase low load threshold."
- --#SUMMARY "A bank or phase on the Rack PDU has violated the low load threshold."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 222
-
-rPDUBankPhaseLowLoadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The bank or phase low load condition on a Rack PDU has been
- cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the bank number (0 if this is phase data).
- The fourth argument is the phase number (0 if this is bank data)."
- --#TYPE "APC Rack PDU: Bank or phase low load condition cleared."
- --#SUMMARY "The bank or phase low load condition on a Rack PDU has been cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 223
-
-rPDUBankPhaseNearOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "WARNING: A bank or phase of the Rack PDU is near an overload condition.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the bank number (0 if this is phase data).
- The fourth argument is the phase number (0 if this is bank data)."
- --#TYPE "APC Rack PDU: Bank or phase near an overload condition."
- --#SUMMARY "A bank or phase of the Rack PDU is near an overload condition."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 224
-
-rPDUBankPhaseNearOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The bank or phase near overload condition on a Rack PDU has
- been cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the bank number (0 if this is phase data).
- The fourth argument is the phase number (0 if this is bank data)."
- --#TYPE "APC Rack PDU: Bank or phase near overload condition has cleared."
- --#SUMMARY "Rack PDU bank or phase near overload condition has cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 225
-
-rPDUBankPhaseOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "SEVERE: A bank or phase of the Rack PDU is in an overload condition.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number.
- The third argument is the bank number (0 if this is phase data).
- The fourth argument is the phase number (0 if this is bank data)."
- --#TYPE "APC Rack PDU: Bank or phase overload condition."
- --#SUMMARY "A bank or phase of the Rack PDU is in an overload condition."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 226
-
-rPDUBankPhaseOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusBankNumber, rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The bank or phase overload condition on a Rack PDU has been
- cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the bank number (0 if this is phase data).
- The fourth argument is the phase number (0 if this is bank data)."
- --#TYPE "APC Rack PDU: Bank or phase overload condition has cleared."
- --#SUMMARY "The bank or phase overload condition on a Rack PDU has cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 227
-
-aruDeviceConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote ARU Device Configurtion change.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: ARU Device configuration change."
- --#SUMMARY "ARU device configuration change."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 228
-
-rmPDUCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString03, mtrapargsString02, mtrapargsString }
- DESCRIPTION
- "SEVERE: Communication Lost.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC RM PDU: Communication Lost."
- --#SUMMARY "Communication Lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 229
-
-emsCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communication Established.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC EMS: Communication Established."
- --#SUMMARY "Communication Established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 230
-
-emsCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Communication Lost.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC EMS: Communication Lost."
- --#SUMMARY "Communication Lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 231
-
-emsProbeConnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A probe has been connected to the EMS.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the probe number.
- The fourth argument is the probe name."
- --#TYPE "APC EMS: Probe Connected."
- --#SUMMARY "Probe Connected."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 232
-
-emsProbeDisconnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A probe has been disconnected from the EMS.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the probe number.
- The fourth argument is the probe name."
- --#TYPE "APC EMS: Probe Disconnected."
- --#SUMMARY "Probe Disconnected."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 233
-
-emsSensorConnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A sensor has been connected to the EMS.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the sensor number.
- The fourth argument is the sensor name."
- --#TYPE "APC EMS: Sensor Connected."
- --#SUMMARY "Sensor Connected."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 234
-
-emsSensorDisconnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A sensor has been disconnected from the EMS.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the sensor number.
- The fourth argument is the sensor name."
- --#TYPE "APC EMS: Sensor Disconnected."
- --#SUMMARY "Sensor Disconnected."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 235
-
-emsSensorFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A EMS sensor is in the fault condition.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the sensor number.
- The fourth argument is the sensor name."
- --#TYPE "APC EMS: Sensor Fault."
- --#SUMMARY "Sensor Fault."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 236
-
-emsSensorFaultCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsSensorStatusSensorIndex, emsSensorStatusSensorName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A EMS sensor fault condition has cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the sensor number.
- The fourth argument is the sensor name."
- --#TYPE "APC EMS: Sensor Fault Cleared."
- --#SUMMARY "Sensor Fault Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 237
-
-emsBeaconConnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A beacon has been connected to the EMS.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC EMS: Beacon Connected."
- --#SUMMARY "Beacon Connected."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 238
-
-emsBeaconDisconnected TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A beacon has been disconnected from the EMS.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC EMS: Beacon Disconnected."
- --#SUMMARY "Beacon Disconnected."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 239
-
-emsBeaconOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A EMS beacon has gone on.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC EMS: Beacon On."
- --#SUMMARY "Beacon On."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 240
-
-emsBeaconOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A EMS beacon has gone off.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC EMS: Beacon Off."
- --#SUMMARY "Beacon Off."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 241
-
-emsMajorAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A Major Alarm is present in the EMS.
- The first argument is the EMS serial number.
- The second argument is the EMS name."
- --#TYPE "APC EMS: Major Alarm."
- --#SUMMARY "Major Alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 242
-
-emsMajorAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Major Alarm condition has been cleared in the EMS.
- The first argument is the EMS serial number.
- The second argument is the EMS name."
- --#TYPE "APC EMS: Major Alarm Cleared."
- --#SUMMARY "Major Alarm Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 243
-
-emsMinorAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A Minor Alarm is present in the EMS.
- The first argument is the EMS serial number.
- The second argument is the EMS name."
- --#TYPE "APC EMS: Minor Alarm."
- --#SUMMARY "Minor Alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 244
-
-emsMinorAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Minor Alarm condition has been cleared in the EMS.
- The first argument is the EMS serial number.
- The second argument is the EMS name."
- --#TYPE "APC EMS: Minor Alarm Cleared."
- --#SUMMARY "Minor Alarm Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 245
-
-emsOutletStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutletStatusOutletIndex, emsOutletStatusOutletName,
- emsOutletStatusOutletState, emsOutletStatusOutletNormalState, mtrapargsString }
- DESCRIPTION
- "WARNING: An outlet on the EMS has changed to its abnormal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the outlet number.
- The fourth argument is the outlet name.
- The fifth argument is the current outlet state (1=ON, 2=OFF).
- The sixth argument is the configured normal outlet state (1=ON, 2=OFF)."
- --#TYPE "APC EMS: Outlet has changed to its abnormal state."
- --#SUMMARY "Outlet has changed to its abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 246
-
-emsOutletStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutletStatusOutletIndex, emsOutletStatusOutletName,
- emsOutletStatusOutletState, emsOutletStatusOutletNormalState, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on the EMS has changed to its normal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the outlet number.
- The fourth argument is the outlet name.
- The fifth argument is the current outlet state (1=ON, 2=OFF).
- The sixth argument is the configured normal outlet state (1=ON, 2=OFF)."
- --#TYPE "APC EMS: Outlet has changed to its normal state."
- --#SUMMARY "Outlet has changed to its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 247
-
-emsInputContactStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsInputContactStatusInputContactIndex,
- emsInputContactStatusInputContactName, emsInputContactStatusInputContactState,
- emsInputContactStatusInputContactNormalState, mtrapargsString }
- DESCRIPTION
- "WARNING: An input contact on the EMS has changed to its abnormal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the input contact number.
- The fourth argument is the input contact name.
- The fifth argument is the input contact state (1=CLOSED, 2=OPEN).
- The sixth argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
- --#TYPE "APC EMS: Input contact has changed to its abnormal state."
- --#SUMMARY "Input contact has changed to its abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 248
-
-emsInputContactStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsInputContactStatusInputContactIndex,
- emsInputContactStatusInputContactName, emsInputContactStatusInputContactState,
- emsInputContactStatusInputContactNormalState, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An input contact on the EMS has changed to its normal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the input contact number.
- The fourth argument is the input contact name.
- The fifth argument is the input contact state (1=CLOSED, 2=OPEN).
- The sixth argument is the configured normal input contact state (1=CLOSED, 2=OPEN)."
- --#TYPE "APC EMS: Input contact has changed to its normal state."
- --#SUMMARY "Input contact has changed to its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 249
-
-emsOutputRelayStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutputRelayStatusOutputRelayIndex,
- emsOutputRelayStatusOutputRelayName, emsOutputRelayStatusOutputRelayState,
- emsOutputRelayStatusOutputRelayNormalState, mtrapargsString }
- DESCRIPTION
- "WARNING: An output relay on the EMS has changed to its abnormal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the output relay number.
- The fourth argument is the output relay name.
- The fifth argument is the current output relay state (1=CLOSED, 2=OPEN).
- The sixth argument is the configured normal output relay state (1=CLOSED, 2=OPEN)."
- --#TYPE "APC EMS: Output Relay has changed to its abnormal state."
- --#SUMMARY "Output Relay has changed to its abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 250
-
-emsOutputRelayStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsOutputRelayStatusOutputRelayIndex,
- emsOutputRelayStatusOutputRelayName, emsOutputRelayStatusOutputRelayState,
- emsOutputRelayStatusOutputRelayNormalState, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An output relay on the EMS has changed to its normal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the output relay number.
- The fourth argument is the output relay name.
- The fifth argument is the current output relay state (1=CLOSED, 2=OPEN).
- The sixth argument is the configured normal output relay state (1=CLOSED, 2=OPEN)."
- --#TYPE "APC EMS: Output Relay has changed to its normal state."
- --#SUMMARY "Output Relay has changed to its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 251
-
-emsDeviceConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A device configuration change has been made on the EMS.
- The first argument is the EMS serial number.
- The second argument is the EMS name."
- --#TYPE "APC: A device configuration change on a EMS."
- --#SUMMARY "A device configuration change has been made on a EMS."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 252
-
-envHighTempThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: High temperature threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: High temperature threshold violation."
- --#SUMMARY "High temperature threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 253
-
-envHighTempThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: High temperature threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: High temperature threshold violation cleared."
- --#SUMMARY "High temperature threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 254
-
-envLowTempThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Low temperature threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Low temperature threshold violation."
- --#SUMMARY "Low temperature threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 255
-
-envLowTempThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Low temperature threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Low temperature threshold violation cleared."
- --#SUMMARY "Low temperature threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 256
-
-envHighHumidityThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: High humidity threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: High humidity threshold violation."
- --#SUMMARY "High humidity threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 257
-
-envHighHumidityThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: High humidity threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity.
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: High humidity threshold violation cleared."
- --#SUMMARY "High humidity threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 258
-
-envLowHumidityThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Low humidity threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: Low humidity threshold violation."
- --#SUMMARY "Low humidity threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 259
-
-envLowHumidityThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Low humidity threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity.
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: Low humidity threshold violation cleared."
- --#SUMMARY "Low humidity threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 260
-
-
--- Switched and Metered Rack PDU Traps
-
-rPDUCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Communication with a Rack PDU has been established.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Communication established."
- --#SUMMARY "Communication with a Rack PDU established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 266
-
-rPDUCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Communication with a Rack PDU has been lost.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Communication lost."
- --#SUMMARY "Communication with a Rack PDU has been lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 267
-
-rPDUOutletOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDUOutletControlIndex, rPDUOutletControlOutletName,
- mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on a Switched Rack PDU has turned on.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the outlet index number.
- The fourth argument is the outlet name."
- --#TYPE "APC Switched Rack PDU: An outlet has turned on."
- --#SUMMARY "An outlet on a Switched Rack PDU has turned on."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 268
-
-rPDUOutletOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDUOutletControlIndex, rPDUOutletControlOutletName,
- mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet on a Switched Rack PDU has turned off.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the outlet index number.
- The fourth argument is the outlet name."
- --#TYPE "APC Switched Rack PDU: An outlet has turned off."
- --#SUMMARY "An outlet on a Switched Rack PDU has turned off."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 269
-
-rPDUDeviceConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A device configuration change has been made on a
- Rack PDU.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Device configuration change made."
- --#SUMMARY "Device configuration change has been made on a Rack PDU."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 270
-
-rPDUOutletConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDUOutletControlIndex, rPDUOutletControlOutletName,
- mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An outlet configuration change has been made on a
- Switched Rack PDU.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the outlet index number.
- The fourth argument is the outlet name."
- --#TYPE "APC Switched Rack PDU: Outlet configuration change made."
- --#SUMMARY "Outlet configuration change has been made on a Switched Rack PDU."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 271
-
-rPDULowLoad TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "WARNING: A Rack PDU has violated the low load threshold.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC Rack PDU: Violation of low load threshold."
- --#SUMMARY "A Rack PDU has violated the low load threshold."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 272
-
-rPDULowLoadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The low load condition on a Rack PDU has been
- cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC Rack PDU: Low load condition cleared."
- --#SUMMARY "The low load condition on a Rack PDU has been cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 273
-
-rPDUNearOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "WARNING: A Rack PDU is near an overload condition.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC Rack PDU: Near an overload condition."
- --#SUMMARY "A Rack PDU is near an overload condition."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 274
-
-rPDUNearOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The near overload condition on a Rack PDU has
- been cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC Rack PDU: Near overload condition has cleared."
- --#SUMMARY "Rack PDU near overload condition has cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 275
-
-rPDUOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "SEVERE: A Rack PDU is in an overload condition.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC Rack PDU: Overload condition."
- --#SUMMARY "A Rack PDU is in an overload condition."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 276
-
-rPDUOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadStatusPhaseNumber, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The overload condition on a Rack PDU has been
- cleared.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase number."
- --#TYPE "APC Rack PDU: Overload condition has cleared."
- --#SUMMARY "The overload condition on a Rack PDU has cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 277
-
-rPDUPowerSupply1Fail TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Power Supply 1 on Rack PDU is in FAIL state.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Power Supply 1 is in FAIL state."
- --#SUMMARY "Power Supply 1 on Rack PDU is in FAIL state."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 278
-
-rPDUPowerSupply1Ok TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Power Supply 1 on Rack PDU is operating normally.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Power Supply 1 is operating normally."
- --#SUMMARY "Power Supply 1 on Rack PDU is operating normally."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 279
-
-rPDUPowerSupply2Fail TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Power Supply 2 on Rack PDU is in FAIL state.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Power Supply 2 is in FAIL state."
- --#SUMMARY "Power Supply 2 on Rack PDU is in FAIL state."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 280
-
-rPDUPowerSupply2Ok TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Power Supply 2 on Rack PDU is operating normally.
- The first argument is the serial number.
- The second argument is the device name."
- --#TYPE "APC Rack PDU: Power Supply 2 is operating normally."
- --#SUMMARY "Power Supply 2 on Rack PDU is operating normally."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 281
-
-rPDUPhaseConfigChange TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDULoadPhaseConfigIndex, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A phase configuration change has been made on a
- Rack PDU.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the phase index number."
- --#TYPE "APC Rack PDU: Phase configuration change made."
- --#SUMMARY "Phase configuration change has been made on a Rack PDU."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 282
-
-rPDUCancelPendingCommand TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { rPDUIdentSerialNumber, rPDUIdentName,
- rPDUOutletControlIndex, rPDUOutletControlOutletName,
- mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A cancel pending command has been made on a
- Switched Rack PDU.
- The first argument is the serial number.
- The second argument is the device name.
- The third argument is the outlet index number (0 indicates all outlets).
- The fourth argument is the outlet name (or device name if all outlets)."
- --#TYPE "APC Switched Rack PDU: Cancel Pending Command made."
- --#SUMMARY "A Cancel Pending Command has been made on a Switched Rack PDU."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 283
-
-aruAlinkCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote ARU Communication Established.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Communication Established."
- --#SUMMARY "Communication Established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 284
-
-aruAlinkCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Remote ARU Communication Lost.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Communication Lost."
- --#SUMMARY "Communication Lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 285
-
-aruFanFail TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Remote ARU Fan Fail.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Fan Fail."
- --#SUMMARY "Fan Fail."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 286
-
-aruFanFailCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote ARU Fan Fail Cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Fan Fail Cleared."
- --#SUMMARY "Fan Fail Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 287
-
-aruSmokeAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Remote ARU Smoke Alarm.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Smoke Alarm."
- --#SUMMARY "Smoke Alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 288
-
-aruSmokeAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote ARU Smoke Alarm Cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Smoke Alarm Cleared."
- --#SUMMARY "Smoke Alarm Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 289
-
-aruHighTemperatureAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Remote ARU High Temperature Alarm.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: High Temperature Alarm."
- --#SUMMARY "High Temperature Alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 290
-
-aruHighTemperatureAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote ARU High Temperature Alarm Cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: High Temperature Alarm Cleared."
- --#SUMMARY "High Temperature Alarm Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 291
-
-aruExhaustTemperatureAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Remote ARU Exhaust Temperature Alarm.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Exhaust Temperature Alarm."
- --#SUMMARY "Exhaust Temperature Alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 292
-
-aruExhaustTemperatureAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- rARUStatusAruIndex, rARUStatusAruName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote ARU Exhaust Temperature Alarm Cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the ARU number.
- The fourth argument is the ARU name."
- --#TYPE "APC ARU: Exhaust Temperature Alarm Cleared."
- --#SUMMARY "Exhaust Temperature Alarm Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 293
-
-envAlinkCommunicationEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Remote Probe Communication Established.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the probe number.
- The fourth argument is the probe name."
- --#TYPE "APC ENV: Communication Established."
- --#SUMMARY "Communication Established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 294
-
-envAlinkCommunicationLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Remote Probe Communication Lost.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the probe number.
- The fourth argument is the probe name."
- --#TYPE "APC ENV: Communication Lost."
- --#SUMMARY "Communication Lost."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 295
-
-emsAlinkPowerOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Alink Power Overload.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC EMS: Alink Power Overload."
- --#SUMMARY "Alink Power Overload."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 296
-
-emsAlinkPowerOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Alink Power Overload Cleared.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC EMS: Alink Power Overload Cleared."
- --#SUMMARY "Alink Power Overload Cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 297
-
-upsOutletGroupTurnedOn TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { upsOutletGroupControlIndex, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The specified Outlet Group turned on."
- --#TYPE "APC UPS: Outlet Group turned on."
- --#SUMMARY "Outlet Group turned on"
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 298
-
-upsOutletGroupTurnedOff TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { upsOutletGroupControlIndex, mtrapargsString }
- DESCRIPTION
- "WARNING: The specified Outlet Group turned off."
- --#TYPE "APC UPS: Outlet Group turned off."
- --#SUMMARY "Outlet Group turned off."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 299
-
-smwCriticalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsGauge, mtrapargsString }
- DESCRIPTION
- "SEVERE: A Symmetra MW UPS critical condition has been detected.
- The first variable is the fault condition."
- --#TYPE "APC Symmetra MW UPS: A critical condition has been detected."
- --#SUMMARY "A critical condition has been detected."
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 300
-
-smwCriticalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsGauge, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Symmetra MW UPS critical condition has been cleared.
- The first variable is the fault condition."
- --#TYPE "APC Symmetra MW UPS: A critical condition has been cleared."
- --#SUMMARY "A critical condition has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 301
-
-smwWarningCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsGauge, mtrapargsString }
- DESCRIPTION
- "WARNING: A Symmetra MW UPS warning condition has been detected.
- The first variable is the fault condition."
- --#TYPE "APC Symmetra MW UPS: A warning condition has been detected."
- --#SUMMARY "A warning condition has been detected."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 302
-
-smwWarningConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsGauge, mtrapargsString }
- DESCRIPTION
- "WARNING: A Symmetra MW UPS warning condition has been cleared.
- The first variable is the fault condition."
- --#TYPE "APC Symmetra MW UPS: A warning condition has been cleared."
- --#SUMMARY "A warning condition has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 303
-
-smwInformationalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsGauge, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Symmetra MW UPS informational condition has been detected.
- The first variable is the fault condition."
- --#TYPE "APC Symmetra MW UPS: Informational condition detected."
- --#SUMMARY "An informational condition has been detected."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 304
-
-smwInformationalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsGauge, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Symmetra MW UPS informational condition has been cleared.
- The first variable is the fault condition."
- --#TYPE "APC Symmetra MW UPS: Informational condition cleared."
- --#SUMMARY "An informational condition has been cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 305
-
-airCriticalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: An Air critical condition was detected.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC Air: A critical condition was detected. "
- --#SUMMARY "A critical condition was detected. "
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 306
-
-airCriticalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Air critical condition was cleared.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC Air: A critical condition was cleared. "
- --#SUMMARY "A critical condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 307
-
-airWarningCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: An Air warning condition was detected.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC Air: A warning condition was detected. "
- --#SUMMARY "A warning condition was detected. "
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 308
-
-airWarningConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: An Air warning condition was cleared.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC Air: A warning condition was cleared. "
- --#SUMMARY "A warning condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 309
-
-airInformationalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Air informational condition was detected.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC Air: Informational condition detected. "
- --#SUMMARY "An informational condition was detected. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 310
-
-airInformationalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Air informational condition was cleared.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC Air: Informational condition was cleared. "
- --#SUMMARY "An informational condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 311
-
--- xPDU Traps (part 1)
-
-xPDUInputVoltageLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: Three-phase input voltage to the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase
- (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
- --#TYPE "APC XPDU: Main input voltage out-of-range alarm."
- --#SUMMARY "Input voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 312
-
-xPDUInputVoltageLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Three-phase input voltage to the device is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XPDU: Main input voltage back in range."
- --#SUMMARY "Input voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 313
-
-
-xPDUInputVoltageHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: Three-phase input voltage to the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase
- (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, above which the alarm was generated."
- --#TYPE "APC XPDU: Main input voltage out-of-range alarm."
- --#SUMMARY "Input voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 314
-
-xPDUInputVoltageHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Three-phase input voltage to the device is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XPDU: Main input voltage back in range."
- --#SUMMARY "Input voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 315
-
-xPDUBypassVoltageLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: Three-phase bypass input voltage to the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
- --#TYPE "APC XPDU: Bypass input voltage out-of-range alarm."
- --#SUMMARY "Bypass input voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 316
-
-xPDUBypassVoltageLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Three-phase bypass input voltage to the device is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XPDU: Bypass input voltage back in range."
- --#SUMMARY "Bypass input voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 317
-
-xPDUBypassVoltageHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: Three-phase bypass input voltage to the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, above which the alarm was generated."
- --#TYPE "APC XPDU: Bypass input voltage out-of-range alarm."
- --#SUMMARY "Bypass input voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 318
-
-xPDUBypassVoltageHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Three-phase bypass input voltage to the device is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XPDU: Bypass input voltage back in range."
- --#SUMMARY "Bypass input voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 319
-
-xPDUOutputVoltageLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: The device three-phase output voltage of the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
- --#TYPE "APC XPDU: Output voltage out-of-range alarm."
- --#SUMMARY "Output voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 320
-
-xPDUOutputVoltageLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output voltage is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XPDU: Output voltage back in range."
- --#SUMMARY "Output voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 321
-
-xPDUOutputVoltageHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: The device three-phase output voltage of the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, above which the alarm was generated."
- --#TYPE "APC XPDU: Output voltage out-of-range alarm."
- --#SUMMARY "Output voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 322
-
-xPDUOutputVoltageHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output voltage is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XPDU: Output voltage back in range."
- --#SUMMARY "Output voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 323
-
-xPDUOutputCurrentLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices three-phase load current is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3).
- The fourth argument is the measured current in tenths of Amps.
- The fifth argument is the threshold, in Amps, from which the alarm was generated."
- --#TYPE "APC XPDU: Output (load) current out-of-range alarm."
- --#SUMMARY "Output current is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 324
-
-xPDUOutputCurrentLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output current is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3).
- The fourth argument is the measured current in tenths of Amps."
- --#TYPE "APC XPDU: Output (load) current back in range."
- --#SUMMARY "Output current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 325
-
-xPDUOutputCurrentHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices three-phase load current is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3).
- The fourth argument is the measured current in tenths of Amps.
- The fifth argument is the threshold, in Amps, above which the alarm was generated."
- --#TYPE "APC XPDU: Output (load) current out-of-range alarm."
- --#SUMMARY "Output current is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 326
-
-xPDUOutputCurrentHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output current is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3).
- The fourth argument is the measured current in tenths of Amps."
- --#TYPE "APC XPDU: Output (load) current back in range."
- --#SUMMARY "Output current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 327
-
-xPDUOutputFrequencyAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices output frequency is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the frequency deviation from the nominal in tenths of Hertz."
- --#TYPE "APC XPDU: Output frequency out-of-range alarm."
- --#SUMMARY "Output frequency is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 328
-
-xPDUOutputFrequencyAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices output frequency is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Output frequency back in range."
- --#SUMMARY "Output frequency in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 329
-
-xPDUSystemGroundCurrentAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices earth ground current is over the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the measured current in tenths of Amps."
- --#TYPE "APC XPDU: Earth ground current over range alarm."
- --#SUMMARY "Earth ground current is over limit."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 330
-
-xPDUSystemGroundCurrentAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices earth ground current is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the measured current in tenths of Amps."
- --#TYPE "APC XPDU: Earth ground current back in range."
- --#SUMMARY "Earth ground current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 331
-
-xPDUInputContactStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: A user input contact on the device has changed to its abnormal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the input contact number.
- The fourth argument is the input contact name.
- The fifth argument is the input contact state (1=OPEN, 2=CLOSED).
- The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XPDU: Input contact has changed to its abnormal state."
- --#SUMMARY "Input contact has changed to its abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 332
-
-xPDUInputContactStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A user input contact on the device has changed to its normal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the input contact number.
- The fourth argument is the input contact name.
- The fifth argument is the input contact state (1=CLOSED, 2=OPEN).
- The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XPDU: Input contact has changed to its normal state."
- --#SUMMARY "Input contact has changed to its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 333
-
-xPDUOutputRelayStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "WARNING: An Output Relay on the device has changed to its abnormal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the Output Relay number.
- The fourth argument is the Output Relay name.
- The fifth argument is the current Output Relay state (1=OPEN, 2=CLOSED).
- The sixth argument is the configured normal Output Relay state (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XPDU: Output Relay has changed to its abnormal state."
- --#SUMMARY "Output Relay has changed to its abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 334
-
-xPDUOutputRelayStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: An Output Relay on the device has changed to its normal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the Output Relay number.
- The fourth argument is the Output Relay name.
- The fifth argument is the current Output Relay state (1=OPEN, 2=CLOSED).
- The sixth argument is the configured normal Output Relay state (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XPDU: Output Relay has changed to its normal state."
- --#SUMMARY "Output Relay has changed to its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 335
-
-xPDUCoolingFanAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The device's internal cooling fans have failed.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Cooling fan failure alarm."
- --#SUMMARY "Cooling fan failure."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 336
-
-xPDUCoolingFanAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The device's cooling fans are now functioning properly.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Cooling fan alarm cleared."
- --#SUMMARY "Cooling fan alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 337
-
-xPDUTransformerTempAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The device's isolation transformer is over temperature.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Isolation transformer over temperature alarm."
- --#SUMMARY "Transformer temp alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 338
-
-xPDUTransformerTempAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The device's isolation transformer is no longer over temperature.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Isolation transformer over temperature alarm cleared."
- --#SUMMARY "Transformer temp alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 339
-
-xPDUBranchCurrentLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The current in a branch circuit is outside the limits specified for that
- branch circuit.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the panel position of the branch circuit (1-based index).
- The fourth argument is the measured current in tenths of Amps.
- The fifth argument is the threshold, in tenth of Amps, from which the alarm was generated."
- --#TYPE "APC XPDU: Branch circuit current out-of-range alarm."
- --#SUMMARY "Branch circuit current is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 340
-
-xPDUBranchCurrentLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The current in a branch circuit is back within the limits
- specified for that branch circuit.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the panel position of the branch circuit (1-based index).
- The fourth argument is the measured current in tenths of Amps."
- --#TYPE "APC XPDU: Branch circuit current back in range."
- --#SUMMARY "Branch circuit current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 341
-
-xPDUBranchCurrentHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The current in a branch circuit is outside the limits specified for that
- branch circuit.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the panel position of the branch circuit (1-based index).
- The fourth argument is the measured current in tenths of Amps.
- The fifth argument is the threshold, in tenth of Amps, above which the alarm was generated."
- --#TYPE "APC XPDU: Branch circuit current out-of-range alarm."
- --#SUMMARY "Branch circuit current is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 342
-
-xPDUBranchCurrentHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The current in a branch circuit is back within the limits
- specified for that branch circuit.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the panel position of the branch circuit (1-based index).
- The fourth argument is the measured current in tenths of Amps."
- --#TYPE "APC XPDU: Branch circuit current back in range."
- --#SUMMARY "Branch circuit current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 343
-
-
-xPDUInternalCommError TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: There is an internal communication error in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Internal communication error."
- --#SUMMARY "Internal communication error."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 344
-
-emsHardwareStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The device's hardware is improperly configured and operating outside
- normal bounds for the hardware. This can be caused by improper devices being
- connected to the EMS ports or Alink Current limit detection."
- --#TYPE "APC EMS: Hardware is in an abnormal state."
- --#SUMMARY "Hardware is in an abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 345
-
-emsHardwareStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The device's hardware is in its normal operational state.
- The first argument is the host device serial number."
- --#TYPE "APC EMS: Hardware is in a normal state."
- --#SUMMARY "Hardware is in its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 346
-
-ceSevereCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: A Custom Event severe condition was detected.
- The first variable is the custom event text message.
- The second variable is the custom event number."
- --#TYPE "APC CustomEvent: A severe condition was detected. "
- --#SUMMARY "A severe condition was detected. "
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 347
-
-ceSevereConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Custom Event severe condition was cleared.
- The first variable is the custom event text message.
- The second variable is the custom event number."
- --#TYPE "APC CustomEvent: A severe condition was cleared. "
- --#SUMMARY "A severe condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 348
-
-ceWarningCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: A Custom Event warning condition was detected.
- The first variable is the custom event text message.
- The second variable is the custom event number."
- --#TYPE "APC CustomEvent: A warning condition was detected. "
- --#SUMMARY "A warning condition was detected. "
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 349
-
-ceWarningConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Custom Event warning condition was cleared.
- The first variable is the custom event text message.
- The second variable is the custom event number."
- --#TYPE "APC CustomEvent: A warning condition was cleared. "
- --#SUMMARY "A warning condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 350
-
-ceInformationalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Custom Event informational condition was detected.
- The first variable is the custom event text message.
- The second variable is the custom event number."
- --#TYPE "APC CustomEvent: Informational condition detected. "
- --#SUMMARY "An informational condition was detected. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 351
-
-ceInformationalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Custom Event informational condition was cleared.
- The first variable is the custom event text message.
- The second variable is the custom event number."
- --#TYPE "APC CustomEvent: Informational condition was cleared. "
- --#SUMMARY "An informational condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 352
-
-upsInternalOverTemperature TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "WARNING: The internal over temperature condition exists."
- --#TYPE "APC UPS: The internal over temperature condition exists."
- --#SUMMARY "The internal over temperature condition exists."
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 353
-
-upsInternalOverTemperatureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The internal over temperature condition cleared."
- --#TYPE "APC UPS: The internal over temperature condition cleared."
- --#SUMMARY "The internal over temperature condition cleared."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 354
-
-upsMpuReset TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The MPU has been reset."
- --#TYPE "APC UPS: The MPU has been reset."
- --#SUMMARY "The MPU has been reset."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 355
-
-upsOutputSwitchClosed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The Output Switch is closed."
- --#TYPE "APC UPS: The Output Switch is closed."
- --#SUMMARY "The Output Switch is closed."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 356
-
-upsOutputSwitchOpened TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The Output Switch is open."
- --#TYPE "APC UPS: The Output Switch is open."
- --#SUMMARY "The Output Switch is open."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 357
-
-upsCalibrationStackChanged TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A calibration value in the stack was changed."
- --#TYPE "APC UPS: A calibration value in the stack was changed."
- --#SUMMARY "A calibration value in the stack was changed."
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 358
-
-
--- Upgraded EMS now has more env traps
-
-envMaxTempThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Max temperature threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Max temperature threshold violation."
- --#SUMMARY "Max temperature threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 359
-
-envMaxTempThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Max temperature threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Max temperature threshold violation cleared."
- --#SUMMARY "Max temperature threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 360
-
-envMinTempThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Min temperature threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Min temperature threshold violation."
- --#SUMMARY "Min temperature threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 361
-
-envMinTempThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Min temperature threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Min temperature threshold violation cleared."
- --#SUMMARY "Min temperature threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 362
-
-envMaxHumidityThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Max humidity threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: Max humidity threshold violation."
- --#SUMMARY "Max humidity threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 363
-
-envMaxHumidityThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Max humidity threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity.
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: Max humidity threshold violation cleared."
- --#SUMMARY "Max humidity threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 364
-
-envMinHumidityThresholdViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Min humidity threshold violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: Min humidity threshold violation."
- --#SUMMARY "Min humidity threshold violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 365
-
-envMinHumidityThresholdViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeHumidity,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Min humidity threshold violation cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current humidity.
- The fourth argument is the probe number.
- The fifth argument is the probe name."
- --#TYPE "APC ENV: Min humidity threshold violation cleared."
- --#SUMMARY "Min humidity threshold violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 366
-
-envSTIncTempRateViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Short-term increasing temperature rate violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Short-term inc. temp rate violation."
- --#SUMMARY "Short-term inc. temp rate violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 367
-
-envSTIncTempRateViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Short-term increasing temperature rate cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Short-term inc. temp rate violation cleared."
- --#SUMMARY "Short-term inc. temp rate violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 368
-
-envSTDecTempRateViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Short-term decreasing temperature rate violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Short-term dec. temp rate violation."
- --#SUMMARY "Short-term dec. temp rate violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 369
-
-envSTDecTempRateViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Short-term decreasing temperature rate cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Short-term dec. temp rate violation cleared."
- --#SUMMARY "Short-term dec. temp rate violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 370
-
-envLTIncTempRateViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Long-term increasing temperature rate violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Long-term inc. temp rate violation."
- --#SUMMARY "Long-term inc. temp rate violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 371
-
-envLTIncTempRateViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Long-term increasing temperature rate cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Long-term inc. temp rate violation cleared."
- --#SUMMARY "Long-term inc. temp rate violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 372
-
-envLTDecTempRateViolation TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Long-term decreasing temperature rate violated on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Long-term dec. temp rate violation."
- --#SUMMARY "Long-term dec. temp rate violation."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 373
-
-envLTDecTempRateViolationCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { emsIdentSerialNumber, emsIdentEMSName, emsProbeStatusProbeTemperature, emsStatusSysTempUnits,
- emsProbeStatusProbeIndex, emsProbeStatusProbeName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Long-term decreasing temperature rate cleared on the probe.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the current temperature.
- The fourth argument is the temperature scale.
- The fifth argument is the probe number.
- The sixth argument is the probe name."
- --#TYPE "APC ENV: Long-term dec. temp rate violation cleared."
- --#SUMMARY "Long-term dec. temp rate violation cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 374
-
--- Battery Management System Traps
-
-bmsCriticalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: A Battery Management System critical condition was detected.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC BMS: A critical condition was detected. "
- --#SUMMARY "A critical condition was detected. "
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 375
-
-bmsCriticalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Battery Management System critical condition was cleared.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC BMS: A critical condition was cleared. "
- --#SUMMARY "A critical condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 376
-
-bmsWarningCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: A Battery Management System warning condition was detected.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC BMS: A warning condition was detected. "
- --#SUMMARY "A warning condition was detected. "
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 377
-
-bmsWarningConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: A Battery Management System warning condition was cleared.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC BMS: A warning condition was cleared. "
- --#SUMMARY "A warning condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 378
-
-bmsInformationalCondition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Battery Management System informational condition was detected.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC BMS: Informational condition detected. "
- --#SUMMARY "An informational condition was detected. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 379
-
-bmsInformationalConditionCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsString02, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A Battery Management System informational condition was cleared.
- The first variable is the error condition text message.
- The second variable is the error number."
- --#TYPE "APC BMS: Informational condition was cleared. "
- --#SUMMARY "An informational condition was cleared. "
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 380
-
--- xATS Traps
-
-xATSOutputVoltageLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The device three-phase output voltage of the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, from which the alarm was generated."
- --#TYPE "APC XATS: Output voltage out-of-range alarm."
- --#SUMMARY "Output voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 381
-
-xATSOutputVoltageLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output voltage is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XATS: Output voltage back in range."
- --#SUMMARY "Output voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 382
-
-xATSOutputVoltageHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The device three-phase output voltage of the device is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts.
- The fifth argument is the threshold, in tenths of Volts, above which the alarm is generated."
- --#TYPE "APC XATS: Output voltage out-of-range alarm."
- --#SUMMARY "Output voltage is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 383
-
-xATSOutputVoltageHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output voltage is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1-N, 2=L2-N, 3=L3-N, 4=unused, 5=L1-L2, 6=L2-L3, 7=L3-L1).
- The fourth argument is the measured voltage in tenths of Volts."
- --#TYPE "APC XATS: Output voltage back in range."
- --#SUMMARY "Output voltage in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 384
-
-xATSOutputCurrentLowAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices three-phase load current is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3, 4=Neutral, 5=L1-2, 6=L2-3, 7=L3-1).
- The fourth argument is the measured current in Amps.
- The fifth argument is the threshold, in Amps, from which the alarm was generated."
- --#TYPE "APC XATS: Output (load) current out-of-range alarm."
- --#SUMMARY "Output current is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 385
-
-xATSOutputCurrentLowAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output current is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3, 4=Neutral).
- The fourth argument is the measured current in Amps."
- --#TYPE "APC XATS: Output (load) current back in range."
- --#SUMMARY "Output current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 386
-
-xATSOutputCurrentHighAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices three-phase load current is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3, 4=Neutral).
- The fourth argument is the measured current in Amps.
- The fifth argument is the threshold, in Amps, from which the alarm was generated."
- --#TYPE "APC XATS: Output (load) current out-of-range alarm."
- --#SUMMARY "Output current is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 387
-
-xATSOutputCurrentHighAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices three-phase output current is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3, 4=Neutral).
- The fourth argument is the measured current in Amps."
- --#TYPE "APC XATS: Output (load) current back in range."
- --#SUMMARY "Output current in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 388
-
-
-xATSOutputFrequencyAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "SEVERE: The devices output frequency is outside the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the frequency deviation from the nominal in tenths of Hertz.
- The fourth argument is the frequency deviation threshold in tenths of Hertz,
- from which the alarm was generated."
- --#TYPE "APC XATS: Output frequency out-of-range alarm."
- --#SUMMARY "Output frequency is out-of-range."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 389
-
-xATSOutputFrequencyAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The devices output frequency is back within the specified limits.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Output frequency back in range."
- --#SUMMARY "Output frequency in range."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 390
-
-xATSInternalCommError TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: There is an internal communication error in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Internal communication error."
- --#SUMMARY "Internal communication error."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 391
-
-xATSInternalCommErrorCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Internal communication has been restored.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Internal Communication error cleared."
- --#SUMMARY "ATS Communication error cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 392
-
-xATSDataCommMismatchError TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: A data incompatibility exists within the device. This
- is typically the result of mismatches between firmware revisions
- of the transfer switch controller and the Network Management interface.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Data mismatch error."
- --#SUMMARY "ATS data mismatch error."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 393
-
-xATSDataCommMismatchErrorCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The internal data incompatibility has been resolved.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: data mismatch error cleared."
- --#SUMMARY "ATS data mismatch error cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 394
-
-xATSGenCommLost TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The XATS cannot communicate with the generator.
- This will make unavailable all the xATSGenerator OIDs.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: No communication with generator."
- --#SUMMARY "ATS/Generator communication lost."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 395
-
-xATSGenCommEstablished TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The XATS has established communication with the generator.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Communication with generator established."
- --#SUMMARY "ATS/generator communication established."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 396
-
-xATSNeutralPosition TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsString }
- DESCRIPTION
- "WARNING: XATS has transferred to neutral position.
- In this position neither Source 1 nor Source 2 is selected,
- and the XATS will have no output voltage.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the mode in which the switch is operating
- (1=Auto, 2=Not-in-Auto, Abnormal Condition 3=Not-in-Auto, manual)."
- --#TYPE "APC XATS: Transferred to the neutral (no output power) position."
- --#SUMMARY "Transferred to neutral."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 397
-
-xATSSwitchTransferEvent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: XATS has transferred from one source to the other.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the mode in which the switch is operating.
- (1=Auto, 2=Not-in-Auto, Abnormal Condition 3=Not-in-Auto, manual).
- The fourth argument is the input source selected (1=Source 1, 2=Source 2).
- The fifth argument is type of transfer that took place. (1=Closed, 2=Open, 3=Unknown)"
- --#TYPE "APC XATS: Transferred from Source-X to Source-Y."
- --#SUMMARY "Source-to-Source transfer."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 398
-
-xATSInternalATSFault TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: An internal XATS fault has been detected.
- The XATS may have forced itself to not-in-auto mode (abnormal condition),
- as indicated by the xATSSwitchStatusAutoSwitchOperationalMode OID.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument indicates the detected fault.
-
- 1=Cannot Close S1
- 2=Cannot Close S2
- 3=Cannot Open S1
- 4=Cannot Open S2
- 5=Cannot Trip Open S1
- 6=Cannot Trip Open S2
- 7=Start Contact Failure
- 8=Voltage Sensing Failure"
-
- --#TYPE "APC XATS: Internal fault detected."
- --#SUMMARY "ATS internal fault detected."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 399
-
-xATSInternalATSFaultCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected internal XATS fault has been cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument indicates the detected fault.
-
- 1=Cannot Close S1
- 2=Cannot Close S2
- 3=Cannot Open S1
- 4=Cannot Open S2
- 5=Cannot Trip Open S1
- 6=Cannot Trip Open S2
- 7=Start Contact Failure
- 8=Voltage Sensing Failure"
-
- --#TYPE "APC XATS: Internal fault cleared."
- --#SUMMARY "ATS internal fault cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 400
-
-xATSEngineStartAsserted TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The XATS has asserted the Engine Start contact.
- This should result in the generator producing output voltage.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument indicates the reason that the start signal was asserted
- 1=Unknown, 2=S1 Low Voltage, 3=S1 High Voltage, 4=S1 Line Imbalance,
- 5=S1 Freq Range, 6=S1 Bad Rotation."
- --#TYPE "APC XATS: Engine Start signal asserted."
- --#SUMMARY "Engine Start asserted."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 401
-
-xATSEngineStopAsserted TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The XATS has de-asserted the Engine Start contact.
- This should result in the generator shutting down, and producing no output voltage.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Engine Stop signal asserted."
- --#SUMMARY "Engine Stop asserted."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 402
-
-xATSStartFailure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator failed to start. After assertion of the
- Engine Start signal, the quality of Source 2 was not seen as good.
- This alarm can be cleared using the xATSSwitchStatusClearLatchedAlarms OID.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument indicates the line quality at S2
- 1=Unknown, 2=S2 Low Voltage, 3=S2 High Voltage, 4=S2 Line Imbalance,
- 4=S2 Freq Range, 5=S2 Bad Rotation."
- --#TYPE "APC XATS: Generator failed to start alarm."
- --#SUMMARY "Generator failed to start."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 403
-
-xATSStopFailure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The generator failed to stop. After de-assertion of the
- Engine Start signal, the quality of Source 2 continued to be seen as good.
- This alarm can be cleared using the xATSSwitchStatusClearLatchedAlarms OID.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Generator failed to stop alarm."
- --#SUMMARY "Generator failed to stop."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 404
-
-xATSNotInAutomaticMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Automatic Transfer Switch is not in automatic mode.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The xATSSwitchStatusAutoSwitchStatus OID and the
- xATSSwitchStatusAutoSwitchOperationalMode OID
- can provide more information about the state of the XATS."
- --#TYPE "APC XATS: XATS is not-in-automatic mode."
- --#SUMMARY "ATS not in auto."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 405
-
-xATSNotInAutomaticModeCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Automatic Transfer Switch is in automatic mode.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: XATS in auto mode."
- --#SUMMARY "ATS in auto mode."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 406
-
-xATSEpoTripped TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The device's Emergency Power Off (EPO) circuit is tripped.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Emergency Power Off (EPO) tripped."
- --#SUMMARY "EPO tripped."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 407
-
-xATSEpoReset TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The device's Emergency Power Off (EPO) circuit has been
- reset to the armed position.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Emergency Power Off (EPO) reset."
- --#SUMMARY "EPO armed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 408
-
-xATSEpoTestMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The device's Emergency Power Off (EPO) circuit has been
- switched back to the test position.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Emergency Power Off (EPO) in test mode."
- --#SUMMARY "EPO disabled."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 409
-
-xATSEpoArmed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The device's Emergency Power Off (EPO) circuit has been
- switched back to the armed position.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Emergency Power Off (EPO) enabled."
- --#SUMMARY "EPO armed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 410
-
-xATSTestInitiated TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A scheduled test has been initiated.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the type of test initiated (1=scheduled, 2=manual)."
- --#TYPE "APC XATS: Test initiated."
- --#SUMMARY "Test initiated."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 411
-
-xATSTestCancelled TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The scheduled test has been canceled
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the type of test initiated (1=scheduled, 2=manual)."
- --#TYPE "APC XATS: Test cancelled."
- --#SUMMARY "Test cancelled."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 412
-
-xATSTestFailed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The initiated test has failed.
- This alarm can be cleared using the xATSSwitchStatusClearLatchedAlarms OID.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Initiated test failed."
- --#SUMMARY "Initiated test failed."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 413
-
-xATSTestPassed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The initiated test has passed
- switched back to the armed position.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Initiated test passed."
- --#SUMMARY "Initiated test passed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 414
-
-xATSInputContactStateAbnormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "SEVERE: A user input contact on the device has changed to its abnormal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the input contact number.
- The fourth argument is the input contact name.
- The fifth argument is the input contact state (1=OPEN, 2=CLOSED).
- The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XATS: Input contact has changed to its abnormal state."
- --#SUMMARY "Input contact has changed to its abnormal state."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 415
-
-xATSInputContactStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger,
- mtrapargsString02, mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A user input contact on the device has changed to its normal state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the input contact number.
- The fourth argument is the input contact name.
- The fifth argument is the input contact state (1=OPEN, 2=CLOSED).
- The sixth argument is the configured normal input contact state (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XATS: Input contact has changed to its normal state."
- --#SUMMARY "Input contact has changed to its normal state."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 416
-
-xATSRemoteStartContactMismatch TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: The state of the generator's Remote Start input
- and the ATS's Engine Start output do not match.
- This indicates something wrong in the Engine Start wiring,
- which must be corrected. This condition will prevent the
- generator from being started when needed.
-
- (See also: xATSGeneratorStatusRemoteStart
- and xATSSwitchStatusEngineStartSignal OIDs)
-
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Generator/ATS start contact mismatch."
- --#SUMMARY "Generator/ATS start contact mismatch."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 417
-
-xATSRemoteStartContactMismatchCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Mismatch in the state of the generator's
- Remote Start input and the ATS's Engine Start output as been resolved.
- This indicates something wrong in the Engine Start wiring,
- which must be corrected. This condition will prevent the
- generator from being started when needed.
-
- (See also: xATSGeneratorStatusRemoteStart
- and xATSSwitchStatusEngineStartSignal OIDs)
-
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Generator/ATS start contact mismatch cleared."
- --#SUMMARY "Generator/ATS start contact mismatch cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 418
-
-xATSDoorOpenAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The XATS exterior panel door is open.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Panel door is open alarm."
- --#SUMMARY "Panel door open alarm."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 419
-
-xATSDoorOpenAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The external door to the device is closed.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Panel door open alarm cleared."
- --#SUMMARY "Panel door open alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 420
-
-xATSDCBackupAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The XATS's DC backup has been lost. The XATS will lose power
- on Source 1 failure, causing the Engine Start signal to be asserted.
- The XATS will then restart from Source 2.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: DC backup failure."
- --#SUMMARY "ATS DC backup failure."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 421
-
-xATSDCBackupAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: DC backup alarm has been cleared in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: DC backup alarm cleared."
- --#SUMMARY "DC backup alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 422
-
--- xATS Generator Traps
-
-xATSGeneratorLowCoolantLevelAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Low coolant level has been detected in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low coolant level alarm."
- --#SUMMARY "Generator low coolant level alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 423
-
-xATSGeneratorLowCoolantLevelAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected low coolant level has been cleared in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low coolant level alarm cleared."
- --#SUMMARY "Generator low coolant level alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 424
-
-xATSGeneratorVeryLowCoolantLevelAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Very low coolant level has been detected in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator very low coolant level alarm."
- --#SUMMARY "Generator very low coolant level alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 425
-
-xATSGeneratorVeryLowCoolantLevelAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected Very low coolant level has been cleared in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator very low coolant level alarm cleared."
- --#SUMMARY "Generator very low coolant level alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 426
-
-xATSGeneratorHighCoolantTempAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: High coolant temperature has been detected in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator high coolant temperature alarm."
- --#SUMMARY "Generator high coolant temperature alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 427
-
-xATSGeneratorHighCoolantTempAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected high coolant temperature has been cleared in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator high coolant temperature alarm cleared."
- --#SUMMARY "Generator high coolant temperature alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 428
-
-xATSGeneratorVeryHighCoolantTempAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Very high coolant temperature has been detected in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator very high coolant temperature alarm."
- --#SUMMARY "Generator very high coolant temperature alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 429
-
-xATSGeneratorVeryHighCoolantTempAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The Very high coolant temperature condition has been cleared in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator very high coolant temperature alarm cleared."
- --#SUMMARY "Generator very high coolant temperature alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 430
-
-xATSGeneratorLowCoolantTempAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: Low coolant temperature has been detected in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low coolant temperature alarm."
- --#SUMMARY "Generator low coolant temperature alarm."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 431
-
-xATSGeneratorLowCoolantTempAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The low coolant temperature condition has been cleared in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low coolant temperature alarm cleared."
- --#SUMMARY "Generator low coolant temperature alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 432
-
-xATSGeneratorLowOilLevelAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: Low oil level has been detected in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low oil level alarm."
- --#SUMMARY "Generator low oil level alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 433
-
-xATSGeneratorLowOilLevelAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Low oil level alarm has been cleared in the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low oil level alarm cleared."
- --#SUMMARY "Generator low oil level alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 434
-
-xATSGeneratorLowBatteryVoltDuringCrankAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator's battery voltage has been detected
- as low while cranking the engine.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Low batt. voltage while cranking alarm."
- --#SUMMARY "Generator low battery volts while cranking alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 435
-
-xATSGeneratorLowBatteryVoltDuringCrankAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator's low battery voltage while
- cranking condition has been cleared.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "XGEN: Generator low batt. voltage while cranking alarm cleared."
- --#SUMMARY "Generator low battery volts while cranking alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 436
-
-xATSGeneratorVeryLowBatteryVoltDuringCrankAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator's battery voltage has been detected
- as very low while cranking the engine.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "XGEN: Generator v.low battery voltage while cranking alarm."
- --#SUMMARY "Generator v.low battery volts while cranking alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 437
-
-xATSGeneratorVeryLowBatteryVoltDuringCrankAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator's high battery voltage while
- cranking condition has been cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "XGEN: Generator v.low batt volt, while cranking alarm cleared."
- --#SUMMARY "Generator v.low battery volts while cranking alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 438
-
-xATSGeneratorEStop TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator's emergency stop input has been activated.
- After the emergency stop signal has been removed, the E-Stop condition
- must be cleared before the generator can be started again.
- E-Stop conditions can only be cleared via the generator front panel.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code.
- The fourth argument is the type of E-Stop (1=LOCAL, 2=REMOTE)."
- --#TYPE "APC XGEN: Generator emergency stop engaged."
- --#SUMMARY "Generator emergency stop engaged."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 439
-
-xATSGeneratorEStopCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator's emergency stop condition has been cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code.
- The fourth argument is the type of E-Stop (1=LOCAL, 2=REMOTE)."
- --#TYPE "APC XGEN: Generator emergency stop condition cleared."
- --#SUMMARY "Generator emergency stop condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 440
-
-xATSGeneratorHighBatteryVolt TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: The generator's battery voltage has been detected as high.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator high battery voltage."
- --#SUMMARY "Generator high battery volts."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 441
-
-xATSGeneratorHighBatteryVoltCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected high battery voltage has been cleared, on the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator high battery voltage condition cleared."
- --#SUMMARY "Generator high battery volts condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 442
-
-xATSGeneratorLowBatteryVolt TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator's battery voltage has been detected as low.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low battery voltage."
- --#SUMMARY "Generator low battery volts."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 443
-
-xATSGeneratorLowBatteryVoltCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected low battery voltage has been cleared, on the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low battery voltage condition cleared."
- --#SUMMARY "Generator low battery volts condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 444
-
-xATSGeneratorControlSwitchNotAuto TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The control switch on the generator is not in auto position.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator not-in-automatic mode."
- --#SUMMARY "Generator not-in-auto."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 445
-
-xATSGeneratorControlSwitchNotAutoCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The control switch on the generator is in auto position.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator automatic mode restored."
- --#SUMMARY "Generator not-in-auto cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 446
-
-xATSGeneratorLowOilPressure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator's oil pressure has been detected as low.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low oil pressure."
- --#SUMMARY "Generator low oil pressure."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 447
-
-xATSGeneratorLowOilPressureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected low oil pressure has been cleared, on the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator low oil pressure condition cleared."
- --#SUMMARY "Generator low oil pressure condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 448
-
-xATSGeneratorVeryLowOilPressure TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator's oil pressure has been detected as very low.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator v.low oil pressure."
- --#SUMMARY "Generator v.low oil pressure."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 449
-
-xATSGeneratorVeryLowOilPressureCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected v.low oil pressure has been cleared, on the generator.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator v.low oil pressure condition cleared."
- --#SUMMARY "Generator v.low oil pressure condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 450
-
-xATSGeneratorOverload TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator is overloaded.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator is in overload event."
- --#SUMMARY "Generator on overload event."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 451
-
-xATSGeneratorOverloadCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator is running within loading limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator is in overload event cleared."
- --#SUMMARY "Generator on overload event cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 452
-
-xATSGeneratorLowACVEvent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator AC voltage is outside the acceptable bounds.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: State of the Generator ac voltage."
- --#SUMMARY " State of the Generator ac voltage."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 453
-
-xATSGeneratorLowACVEventCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator AC voltage is within normal bounds.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: State of the Generator ac voltage cleared."
- --#SUMMARY "State of the Generator ac voltage cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 454
-
-xATSGeneratorHighACVEvent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator AC voltage is outside the acceptable bounds.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: State of the Generator ac voltage."
- --#SUMMARY " State of the Generator ac voltage."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 455
-
-xATSGeneratorHighACVEventCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator AC voltage is within normal bounds.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: State of the Generator ac voltage cleared."
- --#SUMMARY "State of the Generator ac voltage cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 456
-
-xATSGeneratorOverspeed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator is running over the acceptable RPM.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator overspeed condition."
- --#SUMMARY "Generator overspeed condition."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 457
-
-xATSGeneratorOverspeedCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator overspeed shutdown has been cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator overspeed condition cleared."
- --#SUMMARY "Generator overspeed condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 458
-
-xATSGeneratorEngineCold TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator engine is cold, may not start.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator engine is cold, may not start."
- --#SUMMARY "Generator engine is cold."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 459
-
-xATSGeneratorEngineColdCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The engine is not cold to start.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Engine is cold to start condition cleared."
- --#SUMMARY "Engine is cold to start condition cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 460
-
-xATSGeneratorOutputBreakerOpen TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generators output breaker has been detected as open.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator output breaker open alarm."
- --#SUMMARY "Generator output breaker open."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE NONOPERATIONAL
- ::= 461
-
-xATSGeneratorOutputBreakerOpenCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The engine is not cold to start.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator output breaker open alarm cleared."
- --#SUMMARY "Generator output breaker open cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 462
-
-xATSGeneratorLowFuelLevelAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: The tank fuel level is below the limits specified
- in the xATSGeneratorFuelSystemLowFuelLevelThreshold OID.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the measured fuel level in percent of full."
- --#TYPE "APC XGEN: Low fuel level alarm."
- --#SUMMARY "Generator low fuel level alarm."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 463
-
-xATSGeneratorLowFuelLevelAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The tank fuel level is back above the specified limit.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XGEN: Low fuel level alarm cleared."
- --#SUMMARY "Generator low fuel level alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 464
-
-xATSGeneratorVeryLowFuelLevelAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The tank fuel level is below the low threshold limits.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the measured tank fuel level in percent of full."
- --#TYPE "APC XGEN: Very Low fuel level alarm."
- --#SUMMARY "Generator very low fuel level alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 465
-
-xATSGeneratorVeryLowFuelLevelAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected low tank level has been cleared in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XGEN: Very low fuel level alarm cleared."
- --#SUMMARY "Generator very low fuel level alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 466
-
-xATSGeneratorLowRunTimeAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: The estimated runtime is below the limits specified.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the estimated runtime in hours."
- --#TYPE "APC XGEN: Low run time alarm."
- --#SUMMARY "Generator low run time alarm."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 467
-
-xATSGeneratorLowRunTimeAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected low runtime has been cleared in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XGEN: Low run time alarm cleared."
- --#SUMMARY "Generator low run time alarm."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 468
-
-xATSGeneratorVeryLowRunTimeAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The estimated runtime is below the limits specified
- in the xATSGeneratorFuelSystemVeryLowRunTimeThreshold OID.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the estimated runtime in hours."
- --#TYPE "APC XGEN: Very low run time alarm."
- --#SUMMARY "Generator very low run time alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 469
-
-xATSGeneratorVeryLowRunTimeAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The detected low runtime has been cleared in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XGEN: Very low run time alarm cleared."
- --#SUMMARY "Generator very low run time alarm."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 470
-
-xATSGeneratorServiceDueAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The generator is due for scheduled service.
- Generation of this alarm is based on calender days since
- and/or actual generator run-hours since last service.
- This alarm is cleared using the xATSGeneratorServiceResetRecord OID.
-
- (See also: xATSGeneratorServiceCalendarIntervalThreshold
- and xATSGeneratorServiceRunHoursThreshold OIDs)
-
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Generator scheduled maintenance is due."
- --#SUMMARY "Generator maintenance due."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 471
-
-xATSGeneratorServiceDueAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator's service registers have been reset.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Generator service due alarm is cleared."
- --#SUMMARY "Generator service alarm is cleard."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 472
-
-xATSGeneratorShutdown TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator is shutdown.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator shutdown."
- --#SUMMARY "Generator shutdown"
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 473
-
-xATSGeneratorShutdownCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The generator shutdown alarm is cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator shutdown is cleared."
- --#SUMMARY "Generator shutdown is cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 474
-
-xATSGeneratorBatteryCharger TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: The generator battery charger is nonfunctional.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator batt. charger is nonfunctional."
- --#SUMMARY "Generator battery charger is nonfunctional"
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 475
-
-xATSGeneratorBatteryChargerCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: nonfunctionality of the generator battery is cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: " Nonfunctionality of battery charger is cleared."
- --#SUMMARY "non-functionality of Generator battery charger is cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 476
-
-xATSGeneratorGenericEvent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: Any generic generator event.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generator generic event."
- --#SUMMARY "Generator generic event."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 477
-
-xATSGeneratorGenericEventCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xATSIdentSerialNumber, xATSIdentProductName, mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Generated generic generator event is cleared.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the OEM's fault/event code."
- --#TYPE "APC XGEN: Generic generator event is cleared."
- --#SUMMARY "Generic generator event is cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 478
-
--- xPDU Traps (part 2)
-
-xPDUInternalCommErrorCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Internal communication has been restored.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Internal Communication error cleared."
- --#SUMMARY "Communication error cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 479
-
-xPDUSystemStateAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
- mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "WARNING: The PDU's breakers (Q1, Q2 & Q3) are in a configuration that might lead
- to system unavailability. it may signify a temporary condition, when the breakers
- are placed in an atypical manner as the user transitions to (UPS OPERATION or MAINTENANCE BYPASS)
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the type of alarm
- (1=NO UPS INPUT, 2=NO PANEL FEED, 3=ATYPICAL BYPASS MODE)."
- --#TYPE "APC XPDU: System state alarm ."
- --#SUMMARY "PDU state alarm."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 480
-
-xPDUSystemStateNormal TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
- mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The PDU's breakers (Q1, Q2 & Q3) are set in a configuration
- that is a non-alarm state.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the type of alarm (1=UPS OPERATION, 2=MAINTENANCE BYPASS)."
- --#TYPE "APC XPDU: System state returned to normal."
- --#SUMMARY "PDU state normal."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 481
-
-xPDUEpoTestMode TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "WARNING: The device's Emergency Power Off (EPO) circuit has been
- switched back to the test position.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Emergency Power Off (EPO) in test mode."
- --#SUMMARY "EPO disabled."
- --#ARGUMENTS { }
- --#SEVERITY WARNING
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 482
-
-xPDUEpoArmed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: The device's Emergency Power Off (EPO) circuit has been
- switched back to the armed position.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Emergency Power Off (EPO) enabled."
- --#SUMMARY "EPO armed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 483
-
-xPDUFuseBlownAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
- mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "SEVERE: One or more fuses in this PDU have been detected as open.
- These fuses are in the feed to the UPS associated with this PDU.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3)."
- --#TYPE "APC XPDU: Check fuse alarm."
- --#SUMMARY "Fuse detected opened."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 484
-
-xPDUFuseBlownAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
- mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A previous check fuse alarm in this PDU has cleared.
- These fuses are in the feed to the UPS associated with this PDU.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the phase (1=L1, 2=L2, 3=L3)."
- --#TYPE "APC XPDU: Check fuse alarm cleared."
- --#SUMMARY "Fuse alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 485
-
-xPDUBreakerPositionAlarm TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
- mtrapargsInteger, mtrapargsInteger02, mtrapargsString }
- DESCRIPTION
- "SEVERE: A PDU breaker is in a state that compromises system availability.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the breaker (1=MAIN INPUT, 2=BYPASS INPUT, 3=CROSS TIE).
- The fourth argument is the breaker position (1=OPEN, 2=CLOSED)."
- --#TYPE "APC XPDU: Breaker position alarm."
- --#SUMMARY "Breaker position alarm."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 486
-
-xPDUBreakerPositionAlarmCleared TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName,
- mtrapargsInteger, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A PDU breaker is no longer in a state that compromises system availability.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the breaker (1=MAIN INPUT, 2=BYPASS INPUT, 3=CROSS TIE)."
- --#TYPE "APC XPDU: Breaker position alarm cleared."
- --#SUMMARY "Breaker alarm cleared."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 487
-
-xPDUBreakerChangeEvent TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsInteger,
- mtrapargsInteger02, mtrapargsInteger03, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: A system breaker or switch within the device has changed state.
- They are generated when any of the Q1, Q2 or Q3 breakers have changed states.
- The first argument is the host device serial number.
- The second argument is the host device name.
- The third argument is the breaker that has changed
- (1=UPS FEED (Q1), 2=UPS OUTPUT(Q2), 3=MAINTENANCE BYPASS (Q3).
- The fourth argument is the state of the breaker that has changed (1=OPEN, 2=CLOSED).
- The fifth argument is a 8-bit field representing the state of all breakers in the system,
- when any of one of the Q1, Q2 or Q3 breakers have changed state.
-
- The bit map is represented in the following manner (b7, b6 ... b0)
- b0 - UPS FEED (Q1)
- b1 - MAINTENANCE BYPASS (Q3)
- b2 - UPS OUTPUT (Q2)
- b3 - MAIN INPUT
- b4 - BYPASS INPUT
- b5 - CROSS-TIE OUTPUT
-
- Example: value of 60 (0x3C) indicates that the CROSS_TIE, BYPASS and MAIN INPUT, and Q2 breakers
- are CLOSED and Q2, Q1 breakers are OPEN."
- --#TYPE "APC XPDU: Breaker/switch change event."
- --#SUMMARY "Breaker/switch change event."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 488
-
-xPDUControllerFirmwareUpdateTransferStart TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Start Controller firmware transfer in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Start controller firmware transfer."
- --#SUMMARY "Start controller firmware transfer."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 489
-
-xPDUControllerFirmwareUpdateTransferComplete TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Transfer of Controller firmware was completed in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Controller firmware transfer completed."
- --#SUMMARY "Controller firmware transfer completed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 490
-
-xPDUControllerFirmwareUpdateTransferFailed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Transfer of Controller firmware has failed in the PDU.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XPDU: Controller firmware transfer failed."
- --#SUMMARY "Controller firmware transfer failed."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 491
-
-xATSControllerFirmwareUpdateTransferStart TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Start Controller firmware transfer in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Start controller firmware transfer."
- --#SUMMARY "Start controller firmware transfer."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 492
-
-xATSControllerFirmwareUpdateTransferComplete TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "INFORMATIONAL: Transfer of Controller firmware was completed in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Controller firmware transfer completed."
- --#SUMMARY "Controller firmware transfer completed."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 493
-
-xATSControllerFirmwareUpdateTransferFailed TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { xPDUIdentSerialNumber, xPDUIdentProductName, mtrapargsString }
- DESCRIPTION
- "SEVERE: Transfer of Controller firmware has failed in the device.
- The first argument is the host device serial number.
- The second argument is the host device name."
- --#TYPE "APC XATS: Controller firmware transfer failed."
- --#SUMMARY "Controller firmware transfer failed."
- --#ARGUMENTS { }
- --#SEVERITY SEVERE
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE DEGRADED
- ::= 494
-
-apcDeviceShutdownHeartbeat TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { mtrapargsInteger, mtrapargsTimeTicks, mtrapargsString}
- DESCRIPTION
- "INFORMATIONAL: "
- --#TYPE "APC X:"
- --#SUMMARY "."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 999
-
-apcDiscoveryAlarmStateTableUpdate TRAP-TYPE
- ENTERPRISE apc
- VARIABLES { apcDiscoveryDeviceAlarmStateChangeCount }
- DESCRIPTION
- "INTERNAL: A Discovery Alarm State Table Update trap is sent
- when any data alarm state is added, removed, or its parameters
- are changed in the condition table. This trap is
- only for machine-to-machine communication. "
- --#TYPE "APC X:"
- --#SUMMARY "."
- --#ARGUMENTS { }
- --#SEVERITY INFORMATIONAL
- --#TIMEINDEX 1
- --#HELP ""
- --#HELPTAG 0
- --#STATE OPERATIONAL
- ::= 1000
-
-END
diff --git a/fence/agents/bladecenter/Makefile.am b/fence/agents/bladecenter/Makefile.am
deleted file mode 100644
index 09358b5..0000000
--- a/fence/agents/bladecenter/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_bladecenter
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/bladecenter/Makefile.in b/fence/agents/bladecenter/Makefile.in
deleted file mode 100644
index d64bc8c..0000000
--- a/fence/agents/bladecenter/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/bladecenter
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_bladecenter
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/bladecenter/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/bladecenter/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/bladecenter/fence_bladecenter.py b/fence/agents/bladecenter/fence_bladecenter.py
index d72c07f..b45f315 100644
--- a/fence/agents/bladecenter/fence_bladecenter.py
+++ b/fence/agents/bladecenter/fence_bladecenter.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -31,7 +31,7 @@ def get_power_status(conn, options):
i = conn.log_expect([node_cmd, "system>"], int(options["--shell-timeout"]))
if i == 1:
## Given blade number does not exist
- if options.has_key("--missing-as-off"):
+ if "--missing-as-off" in options:
return "off"
else:
fail(EC_STATUS)
@@ -50,7 +50,7 @@ def set_power_status(conn, options):
i = conn.log_expect([node_cmd, "system>"], int(options["--shell-timeout"]))
if i == 1:
## Given blade number does not exist
- if options.has_key("--missing-as-off"):
+ if "--missing-as-off" in options:
return
else:
fail(EC_GENERIC_ERROR)
diff --git a/fence/agents/brocade/Makefile.am b/fence/agents/brocade/Makefile.am
deleted file mode 100644
index 6ff704d..0000000
--- a/fence/agents/brocade/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_brocade
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/brocade/Makefile.in b/fence/agents/brocade/Makefile.in
deleted file mode 100644
index 907c390..0000000
--- a/fence/agents/brocade/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/brocade
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_brocade
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/brocade/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/brocade/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/brocade/fence_brocade.py b/fence/agents/brocade/fence_brocade.py
index 5257bcc..4cf039a 100644
--- a/fence/agents/brocade/fence_brocade.py
+++ b/fence/agents/brocade/fence_brocade.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
import atexit
diff --git a/fence/agents/cisco_mds/Makefile.am b/fence/agents/cisco_mds/Makefile.am
deleted file mode 100644
index c6a19de..0000000
--- a/fence/agents/cisco_mds/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_cisco_mds
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n fc1/1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/cisco_mds/Makefile.in b/fence/agents/cisco_mds/Makefile.in
deleted file mode 100644
index f5dced5..0000000
--- a/fence/agents/cisco_mds/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/cisco_mds
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_cisco_mds
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n fc1/1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/cisco_mds/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/cisco_mds/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/cisco_mds/fence_cisco_mds.py b/fence/agents/cisco_mds/fence_cisco_mds.py
index ba9d917..cb3c960 100644
--- a/fence/agents/cisco_mds/fence_cisco_mds.py
+++ b/fence/agents/cisco_mds/fence_cisco_mds.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following agent has been tested on:
# - Cisco MDS UROS 9134 FC (1 Slot) Chassis ("1/2/4 10 Gbps FC/Supervisor-2") Motorola, e500v2
@@ -64,7 +64,7 @@ def get_outlets_status(conn, options):
port_num = x[0].split('.')[-1]
port_name = x[1].strip('"')
- port_alias = (res_aliases.has_key(port_num) and res_aliases[port_num].strip('"') or "")
+ port_alias = (port_num in res_aliases and res_aliases[port_num].strip('"') or "")
port_status = ""
result[port_name] = (port_alias, port_status)
diff --git a/fence/agents/cisco_ucs/Makefile.am b/fence/agents/cisco_ucs/Makefile.am
deleted file mode 100644
index cc81ee6..0000000
--- a/fence/agents/cisco_ucs/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_cisco_ucs
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/cisco_ucs/Makefile.in b/fence/agents/cisco_ucs/Makefile.in
deleted file mode 100644
index 4c9db5e..0000000
--- a/fence/agents/cisco_ucs/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/cisco_ucs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_cisco_ucs
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/cisco_ucs/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/cisco_ucs/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/cisco_ucs/fence_cisco_ucs.py b/fence/agents/cisco_ucs/fence_cisco_ucs.py
index 6288207..648e45f 100644
--- a/fence/agents/cisco_ucs/fence_cisco_ucs.py
+++ b/fence/agents/cisco_ucs/fence_cisco_ucs.py
@@ -1,7 +1,7 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
-import pycurl, StringIO
+import pycurl, io
import logging
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
@@ -17,7 +17,9 @@ BUILD_DATE="March, 2008"
RE_COOKIE = re.compile("<aaaLogin .* outCookie=\"(.*?)\"", re.IGNORECASE)
RE_STATUS = re.compile("<lsPower .*? state=\"(.*?)\"", re.IGNORECASE)
RE_GET_DN = re.compile(" dn=\"(.*?)\"", re.IGNORECASE)
+RE_GET_PNDN = re.compile(" pndn=\"(.*?)\"", re.IGNORECASE)
RE_GET_DESC = re.compile(" descr=\"(.*?)\"", re.IGNORECASE)
+RE_GET_PRESENCE = re.compile(" presence=\"(.*?)\"", re.IGNORECASE)
options_global = None
@@ -26,18 +28,34 @@ def get_power_status(conn, options):
res = send_command(options, "<configResolveDn cookie=\"" + options["cookie"] +
"\" inHierarchical=\"false\" dn=\"org-root" + options["--suborg"] + "/ls-" +
- options["--plug"] + "/power\"/>", int(options["--shell-timeout"]))
+ options["--plug"] + "\"/>", int(options["--shell-timeout"]))
- result = RE_STATUS.search(res)
+ result = RE_GET_PNDN.search(res)
+ if result == None:
+ pndn = ""
+ else:
+ pndn = result.group(1)
+
+ if pndn.strip() == "":
+ if "--missing-as-off" in options:
+ return "off"
+ else:
+ fail(EC_STATUS)
+
+ res = send_command(options, "<configResolveDn cookie=\"" + options["cookie"] +
+ "\" inHierarchical=\"false\" dn=\"" + pndn +
+ "\"/>", int(options["--shell-timeout"]))
+
+ result = RE_GET_PRESENCE.search(res)
if result == None:
fail(EC_STATUS)
else:
status = result.group(1)
- if status == "up":
- return "on"
- else:
+ if status in ["missing", "mismatch"]:
return "off"
+ else:
+ return "on"
def set_power_status(conn, options):
del conn
@@ -86,17 +104,17 @@ def send_command(opt, command, timeout):
## send command through pycurl
conn = pycurl.Curl()
- web_buffer = StringIO.StringIO()
+ web_buffer = io.StringIO()
conn.setopt(pycurl.URL, url)
conn.setopt(pycurl.HTTPHEADER, ["Content-type: text/xml"])
conn.setopt(pycurl.POSTFIELDS, command)
conn.setopt(pycurl.WRITEFUNCTION, web_buffer.write)
conn.setopt(pycurl.TIMEOUT, timeout)
- if opt.has_key("--ssl") or opt.has_key("--ssl-secure"):
+ if "--ssl" in opt or "--ssl-secure" in opt:
conn.setopt(pycurl.SSL_VERIFYPEER, 1)
conn.setopt(pycurl.SSL_VERIFYHOST, 2)
- if opt.has_key("--ssl-insecure"):
+ if "--ssl-insecure" in opt:
conn.setopt(pycurl.SSL_VERIFYPEER, 0)
conn.setopt(pycurl.SSL_VERIFYHOST, 0)
conn.perform()
@@ -127,7 +145,7 @@ def logout():
def main():
global options_global
- device_opt = ["ipaddr", "login", "passwd", "ssl", "notls", "port", "web", "suborg"]
+ device_opt = ["ipaddr", "login", "passwd", "ssl", "notls", "port", "web", "suborg", "missing_as_off"]
atexit.register(atexit_handler)
atexit.register(logout)
diff --git a/fence/agents/compute/Makefile.am b/fence/agents/compute/Makefile.am
deleted file mode 100644
index ab21272..0000000
--- a/fence/agents/compute/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_compute
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/compute/Makefile.in b/fence/agents/compute/Makefile.in
deleted file mode 100644
index 711c1e5..0000000
--- a/fence/agents/compute/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/compute
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_compute
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/compute/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/compute/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/compute/fence_compute.py b/fence/agents/compute/fence_compute.py
index 4538beb..e3d5061 100644
--- a/fence/agents/compute/fence_compute.py
+++ b/fence/agents/compute/fence_compute.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import time
@@ -45,7 +45,7 @@ def get_power_status(_, options):
else:
logging.debug("Unknown status detected from nova: " + service.state)
break
- except ConnectionError as (err):
+ except ConnectionError as err:
logging.warning("Nova connection failed: " + str(err))
return status
@@ -76,42 +76,53 @@ def _server_evacuate(server, on_shared_storage):
}
def _is_server_evacuable(server, evac_flavors, evac_images):
- if server.flavor.get('id') in evac_flavors:
- return True
- if server.image.get('id') in evac_images:
- return True
- return False
+ if server.flavor.get('id') in evac_flavors:
+ return True
+ if server.image.get('id') in evac_images:
+ return True
+ logging.debug("Instance %s is not evacuable" % server.image.get('id'))
+ return False
def _get_evacuable_flavors():
- result = []
- flavors = nova.flavors.list()
- # Since the detailed view for all flavors doesn't provide the extra specs,
- # we need to call each of the flavor to get them.
- for flavor in flavors:
- if flavor.get_keys().get(EVACUABLE_TAG).strip().lower() in TRUE_TAGS:
- result.append(flavor.id)
- return result
+ result = []
+ flavors = nova.flavors.list()
+ # Since the detailed view for all flavors doesn't provide the extra specs,
+ # we need to call each of the flavor to get them.
+ for flavor in flavors:
+ tag = flavor.get_keys().get(EVACUABLE_TAG)
+ if tag and tag.strip().lower() in TRUE_TAGS:
+ result.append(flavor.id)
+ return result
def _get_evacuable_images():
- result = []
- images = nova.images.list(detailed=True)
- for image in images:
- if hasattr(image, 'metadata'):
- if image.metadata.get(EVACUABLE_TAG).strip.lower() in TRUE_TAGS:
- result.append(image.id)
- return result
+ result = []
+ images = nova.images.list(detailed=True)
+ for image in images:
+ if hasattr(image, 'metadata'):
+ tag = image.metadata.get(EVACUABLE_TAG)
+ if tag and tag.strip().lower() in TRUE_TAGS:
+ result.append(image.id)
+ return result
def _host_evacuate(options):
result = True
- servers = nova.servers.list(search_opts={'host': options["--plug"]})
+ images = _get_evacuable_images()
+ flavors = _get_evacuable_flavors()
+ servers = nova.servers.list(search_opts={'host': options["--plug"], 'all_tenants': 1 })
+
if options["--instance-filtering"] == "False":
- evacuables = servers
- else:
- flavors = _get_evacuable_flavors()
- images = _get_evacuable_images()
+ logging.debug("Not evacuating anything")
+ evacuables = []
+ elif len(flavors) or len(images):
+ logging.debug("Filtering images and flavors: %s %s" % (repr(flavors), repr(images)))
# Identify all evacuable servers
+ logging.debug("Checking %s" % repr(servers))
evacuables = [server for server in servers
- if _is_server_evacuable(server, flavors, images)]
+ if _is_server_evacuable(server, flavors, images)]
+ logging.debug("Evacuating %s" % repr(evacuables))
+ else:
+ logging.debug("Evacuating all images and flavors")
+ evacuables = servers
if options["--no-shared-storage"] != "False":
on_shared_storage = False
@@ -119,6 +130,7 @@ def _host_evacuate(options):
on_shared_storage = True
for server in evacuables:
+ logging.debug("Processing %s" % server)
if hasattr(server, 'id'):
response = _server_evacuate(server.id, on_shared_storage)
if response["accepted"]:
@@ -156,7 +168,7 @@ def set_power_status(_, options):
nova.services.force_down(
options["--plug"], "nova-compute", force_down=False)
except Exception as e:
- # In theory, if foce_down=False fails, that's for the exact
+ # In theory, if force_down=False fails, that's for the exact
# same possible reasons that below with force_down=True
# eg. either an incompatible version or an old client.
# Since it's about forcing back to a default value, there is
@@ -190,7 +202,7 @@ def set_power_status(_, options):
#
# Some callers (such as Pacemaker) will have a timer
# running and kill us if necessary
- logging.debug("Waiting for nova to update it's internal state for %s" % options["--plug"])
+ logging.debug("Waiting for nova to update its internal state for %s" % options["--plug"])
time.sleep(1)
if not _host_evacuate(options):
@@ -198,6 +210,86 @@ def set_power_status(_, options):
return
+
+def fix_domain(options):
+ domains = {}
+ last_domain = None
+
+ if nova:
+ # Find it in nova
+
+ hypervisors = nova.hypervisors.list()
+ for hypervisor in hypervisors:
+ shorthost = hypervisor.hypervisor_hostname.split('.')[0]
+
+ if shorthost == hypervisor.hypervisor_hostname:
+ # Nova is not using FQDN
+ calculated = ""
+ else:
+ # Compute nodes are named as FQDN, strip off the hostname
+ calculated = hypervisor.hypervisor_hostname.replace(shorthost+".", "")
+
+ domains[calculated] = shorthost
+
+ if calculated == last_domain:
+ # Avoid complaining for each compute node with the same name
+ # One hopes they don't appear interleaved as A.com B.com A.com B.com
+ logging.debug("Calculated the same domain from: %s" % hypervisor.hypervisor_hostname)
+
+ elif "--domain" in options and options["--domain"] == calculated:
+ # Supplied domain name is valid
+ return
+
+ elif "--domain" in options:
+ # Warn in case nova isn't available at some point
+ logging.warning("Supplied domain '%s' does not match the one calculated from: %s"
+ % (options["--domain"], hypervisor.hypervisor_hostname))
+
+ last_domain = calculated
+
+ if len(domains) == 0 and "--domain" not in options:
+ logging.error("Could not calculate the domain names used by compute nodes in nova")
+
+ elif len(domains) == 1 and "--domain" not in options:
+ options["--domain"] = last_domain
+
+ elif len(domains) == 1:
+ logging.error("Overriding supplied domain '%s' does not match the one calculated from: %s"
+ % (options["--domain"], hypervisor.hypervisor_hostname))
+ options["--domain"] = last_domain
+
+ elif len(domains) > 1:
+ logging.error("The supplied domain '%s' did not match any used inside nova: %s"
+ % (options["--domain"], repr(domains)))
+ sys.exit(1)
+
+def fix_plug_name(options):
+ if options["--action"] == "list":
+ return
+
+ if "--plug" not in options:
+ return
+
+ fix_domain(options)
+ short_plug = options["--plug"].split('.')[0]
+ logging.debug("Checking target '%s' against calculated domain '%s'"% (options["--plug"], calculated))
+
+ if "--domain" not in options:
+ # Nothing supplied and nova not available... what to do... nothing
+ return
+
+ elif options["--domain"] == "":
+ # Ensure any domain is stripped off since nova isn't using FQDN
+ options["--plug"] = short_plug
+
+ elif options["--plug"].find(options["--domain"]):
+ # Plug already contains the domain, don't re-add
+ return
+
+ else:
+ # Add the domain to the plug
+ options["--plug"] = short_plug + "." + options["--domain"]
+
def get_plugs_list(_, options):
result = {}
@@ -205,12 +297,9 @@ def get_plugs_list(_, options):
hypervisors = nova.hypervisors.list()
for hypervisor in hypervisors:
longhost = hypervisor.hypervisor_hostname
- if options["--domain"] != "":
- shorthost = longhost.replace("." + options["--domain"], "")
- result[longhost] = ("", None)
- result[shorthost] = ("", None)
- else:
- result[longhost] = ("", None)
+ shorthost = longhost.split('.')[0]
+ result[longhost] = ("", None)
+ result[shorthost] = ("", None)
return result
@@ -242,13 +331,30 @@ def define_new_opts():
"default" : "",
"order": 1,
}
+ all_opt["region-name"] = {
+ "getopt" : "",
+ "longopt" : "region-name",
+ "help" : "--region-name=[region] Region Name",
+ "required" : "0",
+ "shortdesc" : "Region Name",
+ "default" : "",
+ "order": 1,
+ }
+ all_opt["insecure"] = {
+ "getopt" : "",
+ "longopt" : "insecure",
+ "help" : "--insecure Explicitly allow agent to perform \"insecure\" TLS (https) requests",
+ "required" : "0",
+ "shortdesc" : "Allow Insecure TLS Requests",
+ "default" : "False",
+ "order": 2,
+ }
all_opt["domain"] = {
"getopt" : "d:",
"longopt" : "domain",
"help" : "-d, --domain=[string] DNS domain in which hosts live, useful when the cluster uses short names and nova uses FQDN",
"required" : "0",
"shortdesc" : "DNS domain in which hosts live",
- "default" : "",
"order": 5,
}
all_opt["record-only"] = {
@@ -263,10 +369,10 @@ def define_new_opts():
all_opt["instance-filtering"] = {
"getopt" : "",
"longopt" : "instance-filtering",
- "help" : "--instance-filtering Only evacuate instances create from images and flavors with evacuable=true",
+ "help" : "--instance-filtering Allow instances created from images and flavors with evacuable=true to be evacuated (or all if no images/flavors have been tagged)",
"required" : "0",
- "shortdesc" : "Only evacuate flagged instances",
- "default" : "False",
+ "shortdesc" : "Allow instances to be evacuated",
+ "default" : "True",
"order": 5,
}
all_opt["no-shared-storage"] = {
@@ -286,7 +392,7 @@ def main():
device_opt = ["login", "passwd", "tenant-name", "auth-url", "fabric_fencing", "on_target",
"no_login", "no_password", "port", "domain", "no-shared-storage", "endpoint-type",
- "record-only", "instance-filtering"]
+ "record-only", "instance-filtering", "insecure", "region-name"]
define_new_opts()
all_opt["shell_timeout"]["default"] = "180"
@@ -306,9 +412,7 @@ def main():
except ImportError:
fail_usage("nova not found or not accessible")
- # Potentially we should make this a pacemaker feature
- if options["--action"] != "list" and options["--domain"] != "" and options.has_key("--plug"):
- options["--plug"] = options["--plug"] + "." + options["--domain"]
+ fix_plug_name(options)
if options["--record-only"] in [ "2", "Disabled", "disabled" ]:
sys.exit(0)
@@ -331,6 +435,8 @@ def main():
options["--password"],
options["--tenant-name"],
options["--auth-url"],
+ insecure=options["--insecure"],
+ region_name=options["--region-name"],
endpoint_type=options["--endpoint-type"])
if options["--action"] in ["off", "reboot"]:
diff --git a/fence/agents/docker/Makefile.am b/fence/agents/docker/Makefile.am
deleted file mode 100644
index 5e623f7..0000000
--- a/fence/agents/docker/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_docker
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/docker/Makefile.in b/fence/agents/docker/Makefile.in
deleted file mode 100644
index 1f435b5..0000000
--- a/fence/agents/docker/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/docker
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_docker
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/docker/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/docker/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/docker/fence_docker.py b/fence/agents/docker/fence_docker.py
index a27ecb1..453a987 100644
--- a/fence/agents/docker/fence_docker.py
+++ b/fence/agents/docker/fence_docker.py
@@ -1,8 +1,8 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import atexit
import sys
-import StringIO
+import io
import logging
import pycurl
import json
@@ -51,7 +51,7 @@ def get_list(conn, options):
def send_cmd(options, cmd, post = False):
url = "http%s://%s:%s/v%s/%s" % ("s" if "--ssl" in options else "", options["--ip"], options["--ipport"], options["--api-version"], cmd)
conn = pycurl.Curl()
- output_buffer = StringIO.StringIO()
+ output_buffer = io.StringIO()
if logging.getLogger().getEffectiveLevel() < logging.WARNING:
conn.setopt(pycurl.VERBOSE, True)
conn.setopt(pycurl.HTTPGET, 1)
@@ -136,7 +136,7 @@ TLS authentication. Required if --ssl option is used.",
"help" : "--api-version "
"Version of Docker Remote API (default: 1.11)",
"required" : "0",
- "order" : "2",
+ "order" : 2,
"default" : "1.11",
}
diff --git a/fence/agents/drac/Makefile.am b/fence/agents/drac/Makefile.am
deleted file mode 100644
index 178da39..0000000
--- a/fence/agents/drac/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_drac
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/drac/Makefile.in b/fence/agents/drac/Makefile.in
deleted file mode 100644
index 1eb5172..0000000
--- a/fence/agents/drac/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/drac
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_drac
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/drac/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/drac/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/drac/fence_drac.py b/fence/agents/drac/fence_drac.py
index 2bac539..f698b39 100644
--- a/fence/agents/drac/fence_drac.py
+++ b/fence/agents/drac/fence_drac.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
import atexit
diff --git a/fence/agents/drac5/Makefile.am b/fence/agents/drac5/Makefile.am
deleted file mode 100644
index 8324764..0000000
--- a/fence/agents/drac5/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_drac5
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/drac5/Makefile.in b/fence/agents/drac5/Makefile.in
deleted file mode 100644
index 6373080..0000000
--- a/fence/agents/drac5/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/drac5
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_drac5
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/drac5/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/drac5/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/drac5/fence_drac5.py b/fence/agents/drac5/fence_drac5.py
index 76dc97d..df113fe 100644
--- a/fence/agents/drac5/fence_drac5.py
+++ b/fence/agents/drac5/fence_drac5.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -88,7 +88,7 @@ def get_list_devices(conn, options):
## standard fence library can't handle correctly situation
## when some fence devices supported by fence agent
## works with 'list' and other should returns 'N/A'
- print "N/A"
+ print("N/A")
return outlets
@@ -129,7 +129,7 @@ By default, the telnet interface is not enabled."
######
conn = fence_login(options)
- if not options.has_key("--drac-version"):
+ if "--drac-version" not in options:
## autodetect from text issued by fence device
if conn.before.find("CMC") >= 0:
options["--drac-version"] = "DRAC CMC"
@@ -142,7 +142,7 @@ By default, the telnet interface is not enabled."
options["--drac-version"] = "DRAC 5"
if options["--drac-version"] in ["DRAC MC", "DRAC CMC"]:
- if not options.has_key("--plug") and 0 == ["monitor", "list"].count(options["--action"]):
+ if "--plug" not in options and 0 == ["monitor", "list"].count(options["--action"]):
fail_usage("Failed: You have to enter module name (-n)")
result = fence_action(conn, options, set_power_status, get_power_status, get_list_devices)
diff --git a/fence/agents/dummy/Makefile.am b/fence/agents/dummy/Makefile.am
deleted file mode 100644
index 0c160a5..0000000
--- a/fence/agents/dummy/Makefile.am
+++ /dev/null
@@ -1,15 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_dummy
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/dummy/Makefile.in b/fence/agents/dummy/Makefile.in
deleted file mode 100644
index 0b76f92..0000000
--- a/fence/agents/dummy/Makefile.in
+++ /dev/null
@@ -1,668 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/dummy
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_dummy
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/dummy/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/dummy/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/dummy/fence_dummy.py b/fence/agents/dummy/fence_dummy.py
index 932009e..e4f1589 100644
--- a/fence/agents/dummy/fence_dummy.py
+++ b/fence/agents/dummy/fence_dummy.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, random
import logging
@@ -42,7 +42,7 @@ def set_power_status_file(conn, options):
def get_power_status_fail(conn, options):
outlets = get_outlets_fail(conn, options)
- if len(outlets) == 0 or not options.has_key("--plug"):
+ if len(outlets) == 0 or "--plug" not in options:
fail_usage("Failed: You have to enter existing machine!")
else:
return outlets[options["--plug"]][0]
@@ -69,7 +69,7 @@ def get_outlets_fail(conn, options):
if options.get("--action", None) == "list":
result["fake_port_1"] = [plug_status, "fake"]
result["fake_port_2"] = [plug_status, "fake"]
- elif not options.has_key("--plug"):
+ elif "--plug" not in options:
fail_usage("Failed: You have to enter existing machine!")
else:
port = options["--plug"]
@@ -78,7 +78,7 @@ def get_outlets_fail(conn, options):
return result
def main():
- device_opt = ["no_password", "status_file", "random_sleep_range", "type", "port"]
+ device_opt = ["no_password", "status_file", "random_sleep_range", "type", "no_port"]
atexit.register(atexit_handler)
@@ -111,12 +111,6 @@ def main():
"order": 1
}
- pinput = process_input(device_opt)
- if (pinput.has_key("--type") and pinput["--type"] == "file") or (pinput.has_key("--type") == False):
- # hack to have fence agents that require ports 'fail' and one that do not 'file'
- device_opt.remove("port")
- device_opt.remove("separator")
-
options = check_input(device_opt, process_input(device_opt))
docs = {}
@@ -128,7 +122,7 @@ def main():
run_delay(options)
# random sleep for testing
- if options.has_key("--random_sleep_range"):
+ if "--random_sleep_range" in options:
val = int(options["--random_sleep_range"])
ran = random.randint(1, val)
logging.info("Random sleep for %d seconds\n", ran)
diff --git a/fence/agents/eaton_snmp/Makefile.am b/fence/agents/eaton_snmp/Makefile.am
deleted file mode 100644
index 415c2b6..0000000
--- a/fence/agents/eaton_snmp/Makefile.am
+++ /dev/null
@@ -1,18 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_eaton_snmp
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC) \
- README
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/eaton_snmp/Makefile.in b/fence/agents/eaton_snmp/Makefile.in
deleted file mode 100644
index 181ac37..0000000
--- a/fence/agents/eaton_snmp/Makefile.in
+++ /dev/null
@@ -1,671 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/eaton_snmp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk README
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_eaton_snmp
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC) \
- README
-
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/eaton_snmp/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/eaton_snmp/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/eaton_snmp/README b/fence/agents/eaton_snmp/README
deleted file mode 100644
index 82619d7..0000000
--- a/fence/agents/eaton_snmp/README
+++ /dev/null
@@ -1,20 +0,0 @@
-This is an snmp based fence agent for Eaton power distribution units to be used
-with RHEL4 Red Hat Cluster Suite.
-
-In order to use this agent, you will need to have net-snmp-utils installed
-on every node in your cluster. net-snmp-utils is scheduled for inclusion
-in the base RHEL distribution for Update 4, and is yummable in FC5.
-
-To use the agent, cp the agent to the /sbin directory on every
-cluster node.
-
-Then define a <fencedevice> in the cluster.conf file with
-agent="fence_eaton_snmp" as an attribute, and use it that way.
-Note, please, that the GUI does not support this agent yet, and you will have
-to edit your cluster.conf by hand and then propagate it yourself. If you need
-help with this, email me at the address below.
-
-The interface for the fence_eaton_snmp agent is identical to the existing
-fence_apc_snmp agent, upon which it has been derived.
-
---Arnaud Quette - ArnaudQuette at Eaton.com
diff --git a/fence/agents/eaton_snmp/fence_eaton_snmp.py b/fence/agents/eaton_snmp/fence_eaton_snmp.py
index 812790d..dfd540c 100644
--- a/fence/agents/eaton_snmp/fence_eaton_snmp.py
+++ b/fence/agents/eaton_snmp/fence_eaton_snmp.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following agent has been tested on:
# - Eaton ePDU Managed - SNMP v1
@@ -77,7 +77,7 @@ def eaton_set_device(conn):
# First resolve type of Eaton
eaton_type = conn.walk(OID_SYS_OBJECT_ID)
- if not ((len(eaton_type) == 1) and (agents_dir.has_key(eaton_type[0][1]))):
+ if not ((len(eaton_type) == 1) and (eaton_type[0][1] in agents_dir)):
eaton_type = [[None, None]]
device = agents_dir[eaton_type[0][1]]
@@ -215,7 +215,7 @@ def main():
# Plug indexing start from zero on ePDU Managed, so we substract '1' from
# the user's given plug number.
# For Switched ePDU, we will add this back again later.
- if options.has_key("--plug") and options["--plug"].isdigit():
+ if "--plug" in options and options["--plug"].isdigit():
options["--plug"] = str(int(options["--plug"]) - 1)
docs = {}
diff --git a/fence/agents/emerson/Makefile.am b/fence/agents/emerson/Makefile.am
deleted file mode 100644
index f7e5497..0000000
--- a/fence/agents/emerson/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_emerson
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/emerson/Makefile.in b/fence/agents/emerson/Makefile.in
deleted file mode 100644
index ad68b9a..0000000
--- a/fence/agents/emerson/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/emerson
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_emerson
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/emerson/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/emerson/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/emerson/fence_emerson.py b/fence/agents/emerson/fence_emerson.py
index a98351a..ed5b5ae 100644
--- a/fence/agents/emerson/fence_emerson.py
+++ b/fence/agents/emerson/fence_emerson.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import atexit
diff --git a/fence/agents/eps/Makefile.am b/fence/agents/eps/Makefile.am
deleted file mode 100644
index c3d6762..0000000
--- a/fence/agents/eps/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_eps
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/eps/Makefile.in b/fence/agents/eps/Makefile.in
deleted file mode 100644
index 971e087..0000000
--- a/fence/agents/eps/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/eps
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_eps
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/eps/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/eps/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/eps/fence_eps.py b/fence/agents/eps/fence_eps.py
index e4fb1e9..dcdacb8 100644
--- a/fence/agents/eps/fence_eps.py
+++ b/fence/agents/eps/fence_eps.py
@@ -1,16 +1,21 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following Agent Has Been Tested On:
# ePowerSwitch 8M+ version 1.0.0.4
import sys, re
-import httplib, base64, string, socket
+import base64, string, socket
import logging
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
from fencing import *
from fencing import fail, fail_usage, EC_LOGIN_DENIED, EC_TIMED_OUT, run_delay
+if sys.version_info.major > 2:
+ import http.client as httplib
+else:
+ import httplib
+
#BEGIN_VERSION_GENERATION
RELEASE_VERSION="ePowerSwitch 8M+ (eps)"
REDHAT_COPYRIGHT=""
@@ -33,8 +38,8 @@ def eps_run_command(options, params):
logging.debug("GET %s\n", request_str)
conn.putrequest('GET', request_str)
- if options.has_key("--username"):
- if not options.has_key("--password"):
+ if "--username" in options:
+ if "--password" not in options:
options["--password"] = "" # Default is empty password
# String for Authorization header
diff --git a/fence/agents/hds_cb/Makefile.am b/fence/agents/hds_cb/Makefile.am
deleted file mode 100644
index f36fca1..0000000
--- a/fence/agents/hds_cb/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_hds_cb
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/hds_cb/Makefile.in b/fence/agents/hds_cb/Makefile.in
deleted file mode 100644
index 74da5dd..0000000
--- a/fence/agents/hds_cb/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/hds_cb
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_hds_cb
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/hds_cb/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/hds_cb/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/hds_cb/fence_hds_cb.py b/fence/agents/hds_cb/fence_hds_cb.py
index 5de8e2a..51cf717 100755
--- a/fence/agents/hds_cb/fence_hds_cb.py
+++ b/fence/agents/hds_cb/fence_hds_cb.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
diff --git a/fence/agents/hpblade/Makefile.am b/fence/agents/hpblade/Makefile.am
deleted file mode 100644
index a5fc2b1..0000000
--- a/fence/agents/hpblade/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_hpblade
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/hpblade/Makefile.in b/fence/agents/hpblade/Makefile.in
deleted file mode 100644
index 9393afa..0000000
--- a/fence/agents/hpblade/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/hpblade
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_hpblade
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/hpblade/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/hpblade/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/hpblade/fence_hpblade.py b/fence/agents/hpblade/fence_hpblade.py
index d527402..a9e712c 100644
--- a/fence/agents/hpblade/fence_hpblade.py
+++ b/fence/agents/hpblade/fence_hpblade.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -8,7 +8,7 @@
#####
import sys, re
-import pexpect, exceptions
+import pexpect
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
from fencing import *
@@ -61,7 +61,7 @@ def get_power_status(conn, options):
status = res.group(1)
if status == "unknown":
- if options.has_key("--missing-as-off"):
+ if "--missing-as-off" in options:
return "off"
else:
fail(EC_STATUS)
diff --git a/fence/agents/ibmblade/Makefile.am b/fence/agents/ibmblade/Makefile.am
deleted file mode 100644
index 47b83d7..0000000
--- a/fence/agents/ibmblade/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ibmblade
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ibmblade/Makefile.in b/fence/agents/ibmblade/Makefile.in
deleted file mode 100644
index 3f14af4..0000000
--- a/fence/agents/ibmblade/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ibmblade
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ibmblade
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ibmblade/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ibmblade/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ibmblade/fence_ibmblade.py b/fence/agents/ibmblade/fence_ibmblade.py
index b4810a5..11ba169 100644
--- a/fence/agents/ibmblade/fence_ibmblade.py
+++ b/fence/agents/ibmblade/fence_ibmblade.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import atexit
diff --git a/fence/agents/ifmib/Makefile.am b/fence/agents/ifmib/Makefile.am
deleted file mode 100644
index 74ba950..0000000
--- a/fence/agents/ifmib/Makefile.am
+++ /dev/null
@@ -1,18 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ifmib
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC) \
- README
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ifmib/Makefile.in b/fence/agents/ifmib/Makefile.in
deleted file mode 100644
index cea774b..0000000
--- a/fence/agents/ifmib/Makefile.in
+++ /dev/null
@@ -1,671 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ifmib
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk README
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ifmib
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC) \
- README
-
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ifmib/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ifmib/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ifmib/README b/fence/agents/ifmib/README
deleted file mode 100644
index cd2a3c1..0000000
--- a/fence/agents/ifmib/README
+++ /dev/null
@@ -1,45 +0,0 @@
-Intro:
-------
-This is an SNMP-based fencing agent for RHCS. It was designed with the use-case
-of disabling ethernet ports on an iSCSI SAN, but could be used to disable any
-port on any SNMP v1/2c/3 device that implementes the IF-MIB.
-
-The script requires NetSNMP to be installed and working on all nodes
-in the cluster. There are no requirements for any MIBs to be setup --- all of
-the required OIDs are hard-coded into the script. Since the IF-MIB is an IETF
-standard, these identifiers are very widely supported and will not change.
-
-
-Typical usage:
---------------
-To use this agen with the switch used on the iSCSI network, you'll require:
- 1) A managed switch running SNMP.
- 2) An SNMP community with write privileges.
- 3) Permission to send SNMP through any ACLs or firewalls from the nodes.
- 4) The ifIndex or ifPort associated with the ports being used by the cluster nodes.
-
-Consider a three-node cluster composed of A, B, and C. Each node has two
-network interfaces - one used for network and cluster communication, the second
-used for iSCSI traffic. If A needs to be fenced, B and C will run this script
-to administratively disable the switchport for A's connection to the iSCSI
-storage.
-
-If you are using a single interface for cluster and iSCSI traffic, this will
-still work, but you will lose network connectivity to the fenced host.
-
-
-cluster.conf:
--------------
-There is no GUI support for this fence agent at this time. To use it, you will
-need something like this cluster.conf
-
-<fencedevice agent="fence_ifmib" name="myswitch" comm="fencing" ipaddr="sw1"/>
-
-In a node's fencing methods, you'll include a line like this:
-
-<device name="myswitch" port="43" option="off"/>
-
-This node will be fenced by disabling the port with ifIndex 43 on the host sw1.
-In SNMP speak, we set IF-MIB::ifAdminStatus.43 = down(2).
-
-If you will use port name (like fc1/1), script will try to find ifIndex.
diff --git a/fence/agents/ifmib/fence_ifmib.py b/fence/agents/ifmib/fence_ifmib.py
index 7df7683..963d3e9 100644
--- a/fence/agents/ifmib/fence_ifmib.py
+++ b/fence/agents/ifmib/fence_ifmib.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following agent has been tested on:
# - Cisco MDS UROS 9134 FC (1 Slot) Chassis ("1/2/4 10 Gbps FC/Supervisor-2") Motorola, e500v2
@@ -84,7 +84,7 @@ def get_outlets_status(conn, options):
port_number = x[0].split('.')[-1]
port_name = x[1].strip('"')
- port_alias = (res_aliases.has_key(port_number) and res_aliases[port_number].strip('"') or "")
+ port_alias = (port_number in res_aliases and res_aliases[port_number].strip('"') or "")
port_status = ""
result[port_name] = (port_alias, port_status)
diff --git a/fence/agents/ilo/Makefile.am b/fence/agents/ilo/Makefile.am
deleted file mode 100644
index c8bdf63..0000000
--- a/fence/agents/ilo/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ilo
-
-SYMTARGET = fence_ilo2
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-
-man_MANS = $(TARGET).8 $(SYMTARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-$(SYMTARGET): $(TARGET)
- cp $^ $@
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ilo/Makefile.in b/fence/agents/ilo/Makefile.in
deleted file mode 100644
index 9c1c730..0000000
--- a/fence/agents/ilo/Makefile.in
+++ /dev/null
@@ -1,673 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ilo
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ilo
-SYMTARGET = fence_ilo2
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-man_MANS = $(TARGET).8 $(SYMTARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ilo/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ilo/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-$(SYMTARGET): $(TARGET)
- cp $^ $@
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ilo/fence_ilo.py b/fence/agents/ilo/fence_ilo.py
index 43f9c4c..36e2ba1 100644
--- a/fence/agents/ilo/fence_ilo.py
+++ b/fence/agents/ilo/fence_ilo.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -113,7 +113,7 @@ the iLO card through an XML stream."
try:
version = re.compile("<RIBCL VERSION=\"(.*?)\"", re.IGNORECASE).search(conn.before).group(1)
- if not options.has_key("--ribcl-version"):
+ if "--ribcl-version" not in options:
options["--ribcl-version"] = float(version)
if options["--ribcl-version"] >= 2:
diff --git a/fence/agents/ilo_moonshot/Makefile.am b/fence/agents/ilo_moonshot/Makefile.am
deleted file mode 100644
index d6e12d7..0000000
--- a/fence/agents/ilo_moonshot/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ilo_moonshot
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ilo_moonshot/Makefile.in b/fence/agents/ilo_moonshot/Makefile.in
deleted file mode 100644
index 611010e..0000000
--- a/fence/agents/ilo_moonshot/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ilo_moonshot
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ilo_moonshot
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ilo_moonshot/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ilo_moonshot/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ilo_moonshot/fence_ilo_moonshot.py b/fence/agents/ilo_moonshot/fence_ilo_moonshot.py
index e161ac6..c534947 100644
--- a/fence/agents/ilo_moonshot/fence_ilo_moonshot.py
+++ b/fence/agents/ilo_moonshot/fence_ilo_moonshot.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import atexit
diff --git a/fence/agents/ilo_mp/Makefile.am b/fence/agents/ilo_mp/Makefile.am
deleted file mode 100644
index fdf265c..0000000
--- a/fence/agents/ilo_mp/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ilo_mp
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ilo_mp/Makefile.in b/fence/agents/ilo_mp/Makefile.in
deleted file mode 100644
index b085eeb..0000000
--- a/fence/agents/ilo_mp/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ilo_mp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ilo_mp
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ilo_mp/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ilo_mp/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ilo_mp/fence_ilo_mp.py b/fence/agents/ilo_mp/fence_ilo_mp.py
index 396d1a9..f878c5c 100644
--- a/fence/agents/ilo_mp/fence_ilo_mp.py
+++ b/fence/agents/ilo_mp/fence_ilo_mp.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
import atexit
diff --git a/fence/agents/ilo_ssh/Makefile.am b/fence/agents/ilo_ssh/Makefile.am
deleted file mode 100644
index 883c306..0000000
--- a/fence/agents/ilo_ssh/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ilo_ssh
-
-SYMTARGET = fence_ilo3_ssh fence_ilo4_ssh
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-
-man_MANS = $(TARGET).8 $(SYMTARGET:%=%.8)
-
-FENCE_TEST_ARGS = -p test -a test -l test
-
-$(SYMTARGET) : $(TARGET)
- cp $^ $@
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ilo_ssh/Makefile.in b/fence/agents/ilo_ssh/Makefile.in
deleted file mode 100644
index d245b34..0000000
--- a/fence/agents/ilo_ssh/Makefile.in
+++ /dev/null
@@ -1,673 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ilo_ssh
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ilo_ssh
-SYMTARGET = fence_ilo3_ssh fence_ilo4_ssh
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-man_MANS = $(TARGET).8 $(SYMTARGET:%=%.8)
-FENCE_TEST_ARGS = -p test -a test -l test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ilo_ssh/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ilo_ssh/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-$(SYMTARGET) : $(TARGET)
- cp $^ $@
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ilo_ssh/fence_ilo_ssh.py b/fence/agents/ilo_ssh/fence_ilo_ssh.py
index a510b2e..fb2d9f3 100644
--- a/fence/agents/ilo_ssh/fence_ilo_ssh.py
+++ b/fence/agents/ilo_ssh/fence_ilo_ssh.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
import atexit
@@ -46,7 +46,6 @@ def main():
all_opt["cmd_prompt"]["default"] = ["MP>", "hpiLO->"]
all_opt["power_wait"]["default"] = 5
- all_opt["method"]["default"] = "onoff"
options = check_input(device_opt, process_input(device_opt))
diff --git a/fence/agents/intelmodular/Makefile.am b/fence/agents/intelmodular/Makefile.am
deleted file mode 100644
index 837fcee..0000000
--- a/fence/agents/intelmodular/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_intelmodular
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/intelmodular/Makefile.in b/fence/agents/intelmodular/Makefile.in
deleted file mode 100644
index f9ec666..0000000
--- a/fence/agents/intelmodular/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/intelmodular
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_intelmodular
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/intelmodular/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/intelmodular/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/intelmodular/fence_intelmodular.py b/fence/agents/intelmodular/fence_intelmodular.py
index e91ccc0..4e1301c 100644
--- a/fence/agents/intelmodular/fence_intelmodular.py
+++ b/fence/agents/intelmodular/fence_intelmodular.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# Tested with an Intel MFSYS25 using firmware package 2.6 Should work with an
# MFSYS35 as well.
diff --git a/fence/agents/ipdu/Makefile.am b/fence/agents/ipdu/Makefile.am
deleted file mode 100644
index 8b16284..0000000
--- a/fence/agents/ipdu/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ipdu
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ipdu/Makefile.in b/fence/agents/ipdu/Makefile.in
deleted file mode 100644
index 2d52195..0000000
--- a/fence/agents/ipdu/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ipdu
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ipdu
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ipdu/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ipdu/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ipdu/fence_ipdu.py b/fence/agents/ipdu/fence_ipdu.py
index 642dc79..7e64859 100644
--- a/fence/agents/ipdu/fence_ipdu.py
+++ b/fence/agents/ipdu/fence_ipdu.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following agent has been tested on:
# IBM iPDU model 46M4002
@@ -8,7 +8,7 @@
import sys
import atexit
import logging
-sys.path.append("/usr/share/fence")
+sys.path.append("@FENCEAGENTSLIBDIR@")
from fencing import *
from fencing import fail_usage
from fencing_snmp import FencingSnmp
@@ -55,7 +55,7 @@ def ipdu_set_device(conn, options):
# First resolve type of PDU device
pdu_type = conn.walk(OID_SYS_OBJECT_ID)
- if not ((len(pdu_type) == 1) and (agents_dir.has_key(pdu_type[0][1]))):
+ if not ((len(pdu_type) == 1) and (pdu_type[0][1] in agents_dir)):
pdu_type = [[None, None]]
device = agents_dir[pdu_type[0][1]]
diff --git a/fence/agents/ipmilan/Makefile.am b/fence/agents/ipmilan/Makefile.am
deleted file mode 100644
index fba2198..0000000
--- a/fence/agents/ipmilan/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ipmilan
-
-SYMTARGET = fence_ilo3 fence_ilo4 fence_imm fence_idrac
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-
-man_MANS = $(TARGET).8 $(SYMTARGET:%=%.8)
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-$(SYMTARGET): $(TARGET)
- cp $^ $@
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ipmilan/Makefile.in b/fence/agents/ipmilan/Makefile.in
deleted file mode 100644
index 516ec86..0000000
--- a/fence/agents/ipmilan/Makefile.in
+++ /dev/null
@@ -1,673 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ipmilan
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ipmilan
-SYMTARGET = fence_ilo3 fence_ilo4 fence_imm fence_idrac
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET) $(SYMTARGET)
-man_MANS = $(TARGET).8 $(SYMTARGET:%=%.8)
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ipmilan/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ipmilan/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-$(SYMTARGET): $(TARGET)
- cp $^ $@
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ipmilan/fence_ipmilan.py b/fence/agents/ipmilan/fence_ipmilan.py
index 66494ed..2b1831b 100644
--- a/fence/agents/ipmilan/fence_ipmilan.py
+++ b/fence/agents/ipmilan/fence_ipmilan.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re, os
import atexit
@@ -35,7 +35,7 @@ def create_command(options, action):
cmd = options["--ipmitool-path"]
# --lanplus / -L
- if options.has_key("--lanplus") and options["--lanplus"] in ["", "1"]:
+ if "--lanplus" in options and options["--lanplus"] in ["", "1"]:
cmd += " -I lanplus"
else:
cmd += " -I lan"
@@ -43,15 +43,15 @@ def create_command(options, action):
cmd += " -H " + options["--ip"]
# --username / -l
- if options.has_key("--username") and len(options["--username"]) != 0:
+ if "--username" in options and len(options["--username"]) != 0:
cmd += " -U " + quote(options["--username"])
# --auth / -A
- if options.has_key("--auth"):
+ if "--auth" in options:
cmd += " -A " + options["--auth"]
# --password / -p
- if options.has_key("--password"):
+ if "--password" in options:
cmd += " -P " + quote(options["--password"])
else:
cmd += " -P ''"
@@ -61,17 +61,17 @@ def create_command(options, action):
cmd += " -C " + options["--cipher"]
# --port / -n
- if options.has_key("--ipport"):
+ if "--ipport" in options:
cmd += " -p " + options["--ipport"]
- if options.has_key("--privlvl"):
+ if "--privlvl" in options:
cmd += " -L " + options["--privlvl"]
# --action / -o
cmd += " chassis power " + action
# --use-sudo / -d
- if options.has_key("--use-sudo"):
+ if "--use-sudo" in options:
cmd = options["--sudo-path"] + " " + cmd
return cmd
@@ -140,6 +140,9 @@ def main():
all_opt["lanplus"]["default"] = "1"
all_opt["ipport"]["default"] = "623"
+ all_opt["method"]["help"] = "-m, --method=[method] Method to fence (onoff|cycle) (Default: cycle)\n" \
+ "WARNING! This fence agent might report success before the node is powered off. " \
+ "You should use -m/method onoff if your fence device works correctly with that option."
options = check_input(device_opt, process_input(device_opt))
@@ -147,7 +150,9 @@ def main():
docs["shortdesc"] = "Fence agent for IPMI"
docs["longdesc"] = "fence_ipmilan is an I/O Fencing agent\
which can be used with machines controlled by IPMI.\
-This agent calls support software ipmitool (http://ipmitool.sf.net/)."
+This agent calls support software ipmitool (http://ipmitool.sf.net/). \
+WARNING! This fence agent might report success before the node is powered off. \
+You should use -m/method onoff if your fence device works correctly with that option."
docs["vendorurl"] = ""
docs["symlink"] = [("fence_ilo3", "Fence agent for HP iLO3"),
("fence_ilo4", "Fence agent for HP iLO4"),
diff --git a/fence/agents/kdump/Makefile.am b/fence/agents/kdump/Makefile.am
deleted file mode 100644
index 2195f64..0000000
--- a/fence/agents/kdump/Makefile.am
+++ /dev/null
@@ -1,20 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-sbin_PROGRAMS = fence_kdump
-libexec_PROGRAMS = fence_kdump_send
-
-noinst_HEADERS = list.h message.h options.h version.h
-
-fence_kdump_SOURCES = fence_kdump.c
-fence_kdump_CFLAGS = -D_GNU_SOURCE
-
-fence_kdump_send_SOURCES = fence_kdump_send.c
-fence_kdump_send_CFLAGS = -D_GNU_SOURCE
-
-dist_man_MANS = fence_kdump.8 fence_kdump_send.8
-
-FENCE_TEST_ARGS = -n test
-
-include $(top_srcdir)/make/agentccheck.mk
-
-check: xml-check.fence_kdump
diff --git a/fence/agents/kdump/Makefile.in b/fence/agents/kdump/Makefile.in
deleted file mode 100644
index 4d44a5a..0000000
--- a/fence/agents/kdump/Makefile.in
+++ /dev/null
@@ -1,863 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = fence_kdump$(EXEEXT)
-libexec_PROGRAMS = fence_kdump_send$(EXEEXT)
-subdir = fence/agents/kdump
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
- $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" \
- "$(DESTDIR)$(man8dir)"
-PROGRAMS = $(libexec_PROGRAMS) $(sbin_PROGRAMS)
-am_fence_kdump_OBJECTS = fence_kdump-fence_kdump.$(OBJEXT)
-fence_kdump_OBJECTS = $(am_fence_kdump_OBJECTS)
-fence_kdump_LDADD = $(LDADD)
-AM_V_lt = $(am__v_lt_ at AM_V@)
-am__v_lt_ = $(am__v_lt_ at AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 =
-fence_kdump_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(fence_kdump_CFLAGS) \
- $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-am_fence_kdump_send_OBJECTS = \
- fence_kdump_send-fence_kdump_send.$(OBJEXT)
-fence_kdump_send_OBJECTS = $(am_fence_kdump_send_OBJECTS)
-fence_kdump_send_LDADD = $(LDADD)
-fence_kdump_send_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
- $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
- $(fence_kdump_send_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
- -o $@
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/make
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_ at AM_V@)
-am__v_CC_ = $(am__v_CC_ at AM_DEFAULT_V@)
-am__v_CC_0 = @echo " CC " $@;
-am__v_CC_1 =
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_ at AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_ at AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo " CCLD " $@;
-am__v_CCLD_1 =
-SOURCES = $(fence_kdump_SOURCES) $(fence_kdump_send_SOURCES)
-DIST_SOURCES = $(fence_kdump_SOURCES) $(fence_kdump_send_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(dist_man_MANS)
-HEADERS = $(noinst_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp $(top_srcdir)/make/agentccheck.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-noinst_HEADERS = list.h message.h options.h version.h
-fence_kdump_SOURCES = fence_kdump.c
-fence_kdump_CFLAGS = -D_GNU_SOURCE
-fence_kdump_send_SOURCES = fence_kdump_send.c
-fence_kdump_send_CFLAGS = -D_GNU_SOURCE
-dist_man_MANS = fence_kdump.8 fence_kdump_send.8
-FENCE_TEST_ARGS = -n test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/agentccheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/kdump/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/kdump/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/agentccheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-libexecPROGRAMS: $(libexec_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p \
- || test -f $$p1 \
- ; then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' \
- -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-libexecPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' \
- `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
-
-clean-libexecPROGRAMS:
- @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \
- echo " rm -f" $$list; \
- rm -f $$list || exit $$?; \
- test -n "$(EXEEXT)" || exit 0; \
- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f" $$list; \
- rm -f $$list
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p \
- || test -f $$p1 \
- ; then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' \
- -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' \
- `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(sbindir)" && rm -f $$files
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
- echo " rm -f" $$list; \
- rm -f $$list || exit $$?; \
- test -n "$(EXEEXT)" || exit 0; \
- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f" $$list; \
- rm -f $$list
-
-fence_kdump$(EXEEXT): $(fence_kdump_OBJECTS) $(fence_kdump_DEPENDENCIES) $(EXTRA_fence_kdump_DEPENDENCIES)
- @rm -f fence_kdump$(EXEEXT)
- $(AM_V_CCLD)$(fence_kdump_LINK) $(fence_kdump_OBJECTS) $(fence_kdump_LDADD) $(LIBS)
-
-fence_kdump_send$(EXEEXT): $(fence_kdump_send_OBJECTS) $(fence_kdump_send_DEPENDENCIES) $(EXTRA_fence_kdump_send_DEPENDENCIES)
- @rm -f fence_kdump_send$(EXEEXT)
- $(AM_V_CCLD)$(fence_kdump_send_LINK) $(fence_kdump_send_OBJECTS) $(fence_kdump_send_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fence_kdump-fence_kdump.Po at am__quote@
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fence_kdump_send-fence_kdump_send.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-fence_kdump-fence_kdump.o: fence_kdump.c
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_CFLAGS) $(CFLAGS) -MT fence_kdump-fence_kdump.o -MD -MP -MF $(DEPDIR)/fence_kdump-fence_kdump.Tpo -c -o fence_kdump-fence_kdump.o `test -f 'fence_kdump.c' || echo '$(srcdir)/'`fence_kdump.c
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fence_kdump-fence_kdump.Tpo $(DEPDIR)/fence_kdump-fence_kdump.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fence_kdump.c' object='fence_kdump-fence_kdump.o' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_CFLAGS) $(CFLAGS) -c -o fence_kdump-fence_kdump.o `test -f 'fence_kdump.c' || echo '$(srcdir)/'`fence_kdump.c
-
-fence_kdump-fence_kdump.obj: fence_kdump.c
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_CFLAGS) $(CFLAGS) -MT fence_kdump-fence_kdump.obj -MD -MP -MF $(DEPDIR)/fence_kdump-fence_kdump.Tpo -c -o fence_kdump-fence_kdump.obj `if test -f 'fence_kdump.c'; then $(CYGPATH_W) 'fence_kdump.c'; else $(CYGPATH_W) '$(srcdir)/fence_kdump.c'; fi`
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fence_kdump-fence_kdump.Tpo $(DEPDIR)/fence_kdump-fence_kdump.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fence_kdump.c' object='fence_kdump-fence_kdump.obj' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_CFLAGS) $(CFLAGS) -c -o fence_kdump-fence_kdump.obj `if test -f 'fence_kdump.c'; then $(CYGPATH_W) 'fence_kdump.c'; else $(CYGPATH_W) '$(srcdir)/fence_kdump.c'; fi`
-
-fence_kdump_send-fence_kdump_send.o: fence_kdump_send.c
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_send_CFLAGS) $(CFLAGS) -MT fence_kdump_send-fence_kdump_send.o -MD -MP -MF $(DEPDIR)/fence_kdump_send-fence_kdump_send.Tpo -c -o fence_kdump_send-fence_kdump_send.o `test -f 'fence_kdump_send.c' || echo '$(srcdir)/'`fence_kdump_send.c
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fence_kdump_send-fence_kdump_send.Tpo $(DEPDIR)/fence_kdump_send-fence_kdump_send.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fence_kdump_send.c' object='fence_kdump_send-fence_kdump_send.o' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_send_CFLAGS) $(CFLAGS) -c -o fence_kdump_send-fence_kdump_send.o `test -f 'fence_kdump_send.c' || echo '$(srcdir)/'`fence_kdump_send.c
-
-fence_kdump_send-fence_kdump_send.obj: fence_kdump_send.c
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_send_CFLAGS) $(CFLAGS) -MT fence_kdump_send-fence_kdump_send.obj -MD -MP -MF $(DEPDIR)/fence_kdump_send-fence_kdump_send.Tpo -c -o fence_kdump_send-fence_kdump_send.obj `if test -f 'fence_kdump_send.c'; then $(CYGPATH_W) 'fence_kdump_send.c'; else $(CYGPATH_W) '$(srcdir)/fence_kdump_send.c'; fi`
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fence_kdump_send-fence_kdump_send.Tpo $(DEPDIR)/fence_kdump_send-fence_kdump_send.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fence_kdump_send.c' object='fence_kdump_send-fence_kdump_send.obj' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_kdump_send_CFLAGS) $(CFLAGS) -c -o fence_kdump_send-fence_kdump_send.obj `if test -f 'fence_kdump_send.c'; then $(CYGPATH_W) 'fence_kdump_send.c'; else $(CYGPATH_W) '$(srcdir)/fence_kdump_send.c'; fi`
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(dist_man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(dist_man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \
- clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libexecPROGRAMS install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libexecPROGRAMS uninstall-man \
- uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
- clean-libexecPROGRAMS clean-libtool clean-sbinPROGRAMS \
- cscopelist-am ctags ctags-am distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-libexecPROGRAMS \
- install-man install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinPROGRAMS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-am uninstall uninstall-am uninstall-libexecPROGRAMS \
- uninstall-man uninstall-man8 uninstall-sbinPROGRAMS
-
-.PRECIOUS: Makefile
-
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- ./$(INPUT) -o metadata > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- ./$(INPUT) -o metadata > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `/usr/bin/time -f "%e" ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || \
- /usr/bin/time -f "%e" ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --
-
-check: xml-check.fence_kdump
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/kdump/fence_kdump.8 b/fence/agents/kdump/fence_kdump.8
index 768f2d3..7161e09 100644
--- a/fence/agents/kdump/fence_kdump.8
+++ b/fence/agents/kdump/fence_kdump.8
@@ -1,11 +1,9 @@
-.TH fence_kdump 8
+
+.TH FENCE_AGENT 8 2009-10-20 "fence_kdump (Fence Agent)"
.SH NAME
fence_kdump - fencing agent for use with kdump crash recovery service
-.SH SYNOPSIS
-.B
-fence_kdump
-[\fIOPTIONS\fR]...
.SH DESCRIPTION
+.P
\fIfence_kdump\fP is an I/O fencing agent to be used with the kdump
crash recovery service. When the \fIfence_kdump\fP agent is invoked,
it will listen for a message from the failed node that acknowledges
@@ -15,71 +13,118 @@ fencing methods. The \fIfence_kdump\fP agent can only detect that a
node has entered the kdump crash recovery service. This allows the
kdump crash recovery service complete without being preempted by
traditional power fencing methods.
-.SH OPTIONS
+
+Note: the "off" action listen for message from failed node that
+acknowledges node has entered kdump crash recovery service. If a valid
+message is received from the failed node, the node is considered to be
+fenced and the agent returns success. Failure to receive a valid
+message from the failed node in the given timeout period results in
+fencing failure.
+.P
+fence_kdump accepts options on the command line as well
+as from stdin. Fenced sends parameters through stdin when it execs the
+agent. fence_kdump can be run by itself with command
+line options. This is useful for testing and for turning outlets on or off
+from scripts.
+
+Vendor URL: http://www.kernel.org/pub/linux/utils/kernel/kexec/
+.SH PARAMETERS
+
+
.TP
.B -n, --nodename=\fINODE\fP
-Name or IP address of node to be fenced. This option is required for
-the "off" action. (default: none)
+.
+Name or IP address of node to be fenced. This option is required for the "off" action.
+
.TP
.B -p, --ipport=\fIPORT\fP
-IP port number that the \fIfence_kdump\fP agent will use to listen for
-messages. (default: 7410)
+.
+IP port number that the \fIfence_kdump\fP agent will use to listen for messages. (Default Value: 7410)
+
.TP
.B -f, --family=\fIFAMILY\fP
-IP network family. Force the \fIfence_kdump\fP agent to use a specific
-family. The value for \fIFAMILY\fP can be "auto", "ipv4", or
-"ipv6". (default: auto)
+.
+IP network family. Force the \fIfence_kdump\fP agent to use a specific family. The value for \fIFAMILY\fP can be "auto", "ipv4", or "ipv6". (Default Value: auto)
+
.TP
.B -o, --action=\fIACTION\fP
-Fencing action to perform. The value for \fIACTION\fP can be either
-"off" or "metadata". (default: off)
+.
+Fencing action to perform. The value for \fIACTION\fP can be either "off" or "metadata". (Default Value: off)
+
.TP
.B -t, --timeout=\fITIMEOUT\fP
-Numer of seconds to wait for message from failed node. If no message
-is received within \fITIMEOUT\fP seconds, the \fIfence_kdump\fP agent
-returns failure. (default: 60)
+.
+Number of seconds to wait for message from failed node. If no message is received within \fITIMEOUT\fP seconds, the \fIfence_kdump\fP agent returns failure. (Default Value: 60)
+
.TP
.B -v, --verbose
-Print verbose output.
+.
+Print verbose output
+
.TP
.B -V, --version
-Print version and exit.
+.
+Print version
+
.TP
.B -h, --help
-Print usage and exit.
-.SH STDIN PARAMETERS
-.PP
-These parameters are passed to \fIfence_kdump\fP via standard input if
-no command-line options are present.
-.TP
-.B nodename=\fINODE\fP
-Name or IP address of node to be fenced. This option is required for
-the "off" action. (default: none)
-.TP
-.B ipport=\fIPORT\fP
-IP port number that the \fIfence_kdump\fP agent will use to listen for
-messages. (default: 7410)
-.TP
-.B action=\fIACTION\fP
-Fencing action to perform. The value for \fIACTION\fP can be either
-"off" or "metadata". (default: off)
-.TP
-.B timeout=\fITIMEOUT\fP
-Numer of seconds to wait for message from failed node. If no message
-is received within \fITIMEOUT\fP seconds, the \fIfence_kdump\fP agent
-returns failure. (default: 60)
+.
+Print usage
+
.SH ACTIONS
+
+
+.TP
+\fBoff \fP
+Power off machine.
+
+.TP
+\fBmonitor \fP
+Check the health of fence device
+
+.TP
+\fBmetadata \fP
+Display the XML metadata describing this resource.
+
+.SH STDIN PARAMETERS
+
+
+.TP
+.B nodename
+.
+Name or IP address of node to be fenced. This option is required for the "off" action.
+
+.TP
+.B ipport
+.
+IP port number that the \fIfence_kdump\fP agent will use to listen for messages. (Default Value: 7410)
+
+.TP
+.B family
+.
+IP network family. Force the \fIfence_kdump\fP agent to use a specific family. The value for \fIFAMILY\fP can be "auto", "ipv4", or "ipv6". (Default Value: auto)
+
+.TP
+.B action
+.
+Fencing action to perform. The value for \fIACTION\fP can be either "off" or "metadata". (Default Value: off)
+
+.TP
+.B timeout
+.
+Number of seconds to wait for message from failed node. If no message is received within \fITIMEOUT\fP seconds, the \fIfence_kdump\fP agent returns failure. (Default Value: 60)
+
+.TP
+.B verbose
+.
+Print verbose output
+
+.TP
+.B version
+.
+Print version
+
.TP
-.B off
-Listen for message from failed node that acknowledges node has entered
-kdump crash recovery service. If a valid message is received from the
-failed node, the node is considered to be fenced and the agent returns
-success. Failure to receive a valid message from the failed node in
-the given timeout period results in fencing failure.
-.TP
-.B metadata
-Print XML metadata to standard output.
-.SH AUTHOR
-Ryan O'Hara <rohara at redhat.com>
-.SH SEE ALSO
-fence_kdump_send(8), fenced(8), fence_node(8)
+.B usage
+.
+Print usage
diff --git a/fence/agents/kdump/fence_kdump.c b/fence/agents/kdump/fence_kdump.c
index 781df64..c3bcf08 100644
--- a/fence/agents/kdump/fence_kdump.c
+++ b/fence/agents/kdump/fence_kdump.c
@@ -203,47 +203,68 @@ do_action_metadata (const char *self)
{
fprintf (stdout, "<?xml version=\"1.0\" ?>\n");
fprintf (stdout, "<resource-agent name=\"%s\"", basename (self));
- fprintf (stdout, " shortdesc=\"Fence agent for use with kdump\">\n");
+ fprintf (stdout, " shortdesc=\"fencing agent for use with kdump crash recovery service\">\n");
fprintf (stdout, "<longdesc>");
- fprintf (stdout, "The fence_kdump agent is intended to be used with with kdump service.");
+ fprintf (stdout, "\\fIfence_kdump\\fP is an I/O fencing agent to be used with the kdump\n"
+ "crash recovery service. When the \\fIfence_kdump\\fP agent is invoked,\n"
+ "it will listen for a message from the failed node that acknowledges\n"
+ "that the failed node it executing the kdump crash kernel.\n"
+ "Note that \\fIfence_kdump\\fP is not a replacement for traditional\n"
+ "fencing methods. The \\fIfence_kdump\\fP agent can only detect that a\n"
+ "node has entered the kdump crash recovery service. This allows the\n"
+ "kdump crash recovery service complete without being preempted by\n"
+ "traditional power fencing methods.\n\n"
+ "Note: the \"off\" action listen for message from failed node that\n"
+ "acknowledges node has entered kdump crash recovery service. If a valid\n"
+ "message is received from the failed node, the node is considered to be\n"
+ "fenced and the agent returns success. Failure to receive a valid\n"
+ "message from the failed node in the given timeout period results in\n"
+ "fencing failure.");
fprintf (stdout, "</longdesc>\n");
fprintf (stdout, "<vendor-url>http://www.kernel.org/pub/linux/utils/kernel/kexec/</vendor-url>\n");
fprintf (stdout, "<parameters>\n");
fprintf (stdout, "\t<parameter name=\"nodename\" unique=\"0\" required=\"0\">\n");
- fprintf (stdout, "\t\t<getopt mixed=\"-n, --nodename\" />\n");
+ fprintf (stdout, "\t\t<getopt mixed=\"-n, --nodename=\\fINODE\\fP\" />\n");
fprintf (stdout, "\t\t<content type=\"string\" />\n");
fprintf (stdout, "\t\t<shortdesc lang=\"en\">%s</shortdesc>\n",
- "Name or IP address of node to be fenced");
+ "Name or IP address of node to be fenced. This option is required for\n"
+ "the \"off\" action.");
fprintf (stdout, "\t</parameter>\n");
fprintf (stdout, "\t<parameter name=\"ipport\" unique=\"0\" required=\"0\">\n");
- fprintf (stdout, "\t\t<getopt mixed=\"-p, --ipport\" />\n");
+ fprintf (stdout, "\t\t<getopt mixed=\"-p, --ipport=\\fIPORT\\fP\" />\n");
fprintf (stdout, "\t\t<content type=\"string\" default=\"7410\" />\n");
fprintf (stdout, "\t\t<shortdesc lang=\"en\">%s</shortdesc>\n",
- "Port number");
+ "IP port number that the \\fIfence_kdump\\fP agent will use to listen for\n"
+ "messages.");
fprintf (stdout, "\t</parameter>\n");
fprintf (stdout, "\t<parameter name=\"family\" unique=\"0\" required=\"0\">\n");
- fprintf (stdout, "\t\t<getopt mixed=\"-f, --family\" />\n");
+ fprintf (stdout, "\t\t<getopt mixed=\"-f, --family=\\fIFAMILY\\fP\" />\n");
fprintf (stdout, "\t\t<content type=\"string\" default=\"auto\" />\n");
fprintf (stdout, "\t\t<shortdesc lang=\"en\">%s</shortdesc>\n",
- "Network family");
+ "IP network family. Force the \\fIfence_kdump\\fP agent to use a specific\n"
+ "family. The value for \\fIFAMILY\\fP can be \"auto\", \"ipv4\", or\n"
+ "\"ipv6\".");
fprintf (stdout, "\t</parameter>\n");
fprintf (stdout, "\t<parameter name=\"action\" unique=\"0\" required=\"0\">\n");
- fprintf (stdout, "\t\t<getopt mixed=\"-o, --action\" />\n");
+ fprintf (stdout, "\t\t<getopt mixed=\"-o, --action=\\fIACTION\\fP\" />\n");
fprintf (stdout, "\t\t<content type=\"string\" default=\"off\" />\n");
fprintf (stdout, "\t\t<shortdesc lang=\"en\">%s</shortdesc>\n",
- "Fencing action");
+ "Fencing action to perform. The value for \\fIACTION\\fP can be either\n"
+ "\"off\" or \"metadata\".");
fprintf (stdout, "\t</parameter>\n");
fprintf (stdout, "\t<parameter name=\"timeout\" unique=\"0\" required=\"0\">\n");
- fprintf (stdout, "\t\t<getopt mixed=\"-t, --timeout\" />\n");
+ fprintf (stdout, "\t\t<getopt mixed=\"-t, --timeout=\\fITIMEOUT\\fP\" />\n");
fprintf (stdout, "\t\t<content type=\"string\" default=\"60\" />\n");
fprintf (stdout, "\t\t<shortdesc lang=\"en\">%s</shortdesc>\n",
- "Timeout in seconds");
+ "Number of seconds to wait for message from failed node. If no message\n"
+ "is received within \\fITIMEOUT\\fP seconds, the \\fIfence_kdump\\fP agent\n"
+ "returns failure.");
fprintf (stdout, "\t</parameter>\n");
fprintf (stdout, "\t<parameter name=\"verbose\" unique=\"0\" required=\"0\">\n");
diff --git a/fence/agents/ldom/Makefile.am b/fence/agents/ldom/Makefile.am
deleted file mode 100644
index 8a58536..0000000
--- a/fence/agents/ldom/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ldom
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ldom/Makefile.in b/fence/agents/ldom/Makefile.in
deleted file mode 100644
index 9073fbd..0000000
--- a/fence/agents/ldom/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ldom
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ldom
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ldom/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ldom/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ldom/fence_ldom.py b/fence/agents/ldom/fence_ldom.py
index 27a1a4a..b4d8724 100644
--- a/fence/agents/ldom/fence_ldom.py
+++ b/fence/agents/ldom/fence_ldom.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
##
## The Following Agent Has Been Tested On - LDOM 1.0.3
@@ -7,7 +7,7 @@
##
#####
-import sys, re, pexpect, exceptions
+import sys, re, pexpect
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
from fencing import *
diff --git a/fence/agents/lib/Makefile.in b/fence/agents/lib/Makefile.in
index a6ebb6d..4c5bbac 100644
--- a/fence/agents/lib/Makefile.in
+++ b/fence/agents/lib/Makefile.in
@@ -228,6 +228,11 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SBD_PATH = @SBD_PATH@
SED = @SED@
@@ -287,9 +292,13 @@ mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@@ -546,11 +555,13 @@ uninstall-am: uninstall-fencelibDATA uninstall-rngDATA
.PRECIOUS: Makefile
$(TARGET): $(SRC)
+ mkdir -p `dirname $@`
bash $(top_srcdir)/scripts/fenceparse \
$(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
$(VERSION) \
$(abs_srcdir) $@ | \
sed \
+ -e 's#@''PYTHON@#${PYTHON}#g' \
-e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
-e 's#@''LOGDIR@#${LOGDIR}#g' \
-e 's#@''SBINDIR@#${sbindir}#g' \
@@ -575,12 +586,21 @@ $(TARGET): $(SRC)
-e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
> $@
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
+ if [ 0 -eq `echo "$(@)" | grep fence_ &> /dev/null; echo $$?` ]; then \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
else true ; fi
+ for x in `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ cp $(@) $(@D)/$$x; \
+ $(MAKE) $(@D)/$$x.8; \
+ done
+
clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
+ rm -f $(CLEAN_TARGET:%.8=%) $(CLEAN_TARGET_ADDITIONAL) $(scsidata_SCRIPTS) */*.pyc */*.wiki
+
+ if [ "$(abs_builddir)" = "$(abs_top_builddir)/fence/agents/lib" ]; then \
+ rm -f $(TARGET); \
+ fi
clean-local: clean
diff --git a/fence/agents/lib/XenAPI.py.py b/fence/agents/lib/XenAPI.py.py
index b91efda..3f5456d 100644
--- a/fence/agents/lib/XenAPI.py.py
+++ b/fence/agents/lib/XenAPI.py.py
@@ -44,12 +44,18 @@
# OF THIS SOFTWARE.
# --------------------------------------------------------------------
+import sys
import gettext
-import xmlrpclib
-import httplib
import socket
import logging
+if sys.version_info.major > 2:
+ import xmlrpc.client as xmlrpclib
+ import http.client as httplib
+else:
+ import xmlrpclib
+ import httplib
+
translation = gettext.translation('xen-xm', fallback=True)
class Failure(Exception):
@@ -63,16 +69,16 @@ class Failure(Exception):
details[3] = str(int(details[3]) - 1)
self.details = details
- except Exception, exn:
+ except Exception as exn:
self.details = ['INTERNAL_ERROR', 'Client-side: ' + str(exn)]
def __str__(self):
try:
return translation.ugettext(self.details[0]) % self._details_map()
- except TypeError, exn:
+ except TypeError as exn:
return "Message database broken: %s.\nXen-API failure: %s" % \
(exn, str(self.details))
- except Exception, exn:
+ except Exception as exn:
logging.error("%s\n", str(exn))
return "Xen-API failure: %s" % str(self.details)
@@ -91,12 +97,9 @@ class UDSHTTPConnection(httplib.HTTPConnection):
self.sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
self.sock.connect(path)
-class UDSHTTP(httplib.HTTP):
- _connection_class = UDSHTTPConnection
-
class UDSTransport(xmlrpclib.Transport):
def make_connection(self, host):
- return UDSHTTP(host)
+ return httplib.HTTPConnection(host)
class Session(xmlrpclib.ServerProxy):
"""A server proxy and session manager for communicating with Xend using
diff --git a/fence/agents/lib/check_used_options.py b/fence/agents/lib/check_used_options.py
index 0eb19e3..b90bc05 100755
--- a/fence/agents/lib/check_used_options.py
+++ b/fence/agents/lib/check_used_options.py
@@ -16,8 +16,8 @@ def main():
available = {}
## all_opt from fencing library are imported
- for k in all_opt.keys():
- if all_opt[k].has_key("longopt"):
+ for k in list(all_opt.keys()):
+ if "longopt" in all_opt[k]:
available["--" + all_opt[k]["longopt"]] = True
## add UUID which is derived automatically from --plug if possible
@@ -47,13 +47,13 @@ def main():
counter += 1
for option in option_use_re.findall(line):
- if not available.has_key(option):
- print "ERROR on line %d in %s: option %s is not defined" % (counter, agent, option_use_re.search(line).group(1))
+ if option not in available:
+ print("ERROR on line %d in %s: option %s is not defined" % (counter, agent, option_use_re.search(line).group(1)))
without_errors = False
for option in option_has_re.findall(line):
- if not available.has_key(option):
- print "ERROR on line %d in %s: option %s is not defined" % (counter, agent, option_has_re.search(line).group(1))
+ if option not in available:
+ print("ERROR on line %d in %s: option %s is not defined" % (counter, agent, option_has_re.search(line).group(1)))
without_errors = False
if without_errors:
diff --git a/fence/agents/lib/fencing.py.py b/fence/agents/lib/fencing.py.py
index 0e57e39..4e0b30a 100644
--- a/fence/agents/lib/fencing.py.py
+++ b/fence/agents/lib/fencing.py.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, getopt, time, os, uuid, pycurl, stat
import pexpect, re, syslog
@@ -6,7 +6,6 @@ import logging
import subprocess
import threading
import shlex
-import exceptions
import socket
import textwrap
import __main__
@@ -139,11 +138,11 @@ all_opt = {
"telnet" : {
"getopt" : "",
"help" : "",
- "order" : ""},
+ "order" : 1},
"diag" : {
"getopt" : "",
"help" : "",
- "order" : ""},
+ "order" : 1},
"passwd" : {
"getopt" : "p:",
"longopt" : "password",
@@ -489,7 +488,7 @@ def _add_dependency_options(options):
## Add also options which are available for every fence agent
added_opt = []
for opt in options + ["default"]:
- if DEPENDENCY_OPT.has_key(opt):
+ if opt in DEPENDENCY_OPT:
added_opt.extend([y for y in DEPENDENCY_OPT[opt] if options.count(y) == 0])
if not "port" in (options + added_opt) and \
@@ -525,37 +524,36 @@ def fail(error_code):
sys.exit(EC_GENERIC_ERROR)
def usage(avail_opt):
- print "Usage:"
- print "\t" + os.path.basename(sys.argv[0]) + " [options]"
- print "Options:"
+ print("Usage:")
+ print("\t" + os.path.basename(sys.argv[0]) + " [options]")
+ print("Options:")
sorted_list = [(key, all_opt[key]) for key in avail_opt]
- sorted_list.sort(lambda x, y: cmp(x[1]["order"], y[1]["order"]))
+ sorted_list.sort(key=lambda x: x[1]["order"])
for key, value in sorted_list:
if len(value["help"]) != 0:
- print " " + _join_wrap([value["help"]], first_indent=3)
+ print(" " + _join_wrap([value["help"]], first_indent=3))
def metadata(avail_opt, docs):
# avail_opt has to be unique, if there are duplicities then they should be removed
sorted_list = [(key, all_opt[key]) for key in list(set(avail_opt))]
- sorted_list.sort(lambda x, y: cmp(x[0], y[0]))
- sorted_list.sort(lambda x, y: cmp(x[1]["order"], y[1]["order"]))
+ sorted_list.sort(key=lambda x: (x[1]["order"], x[0]))
- print "<?xml version=\"1.0\" ?>"
- print "<resource-agent name=\"" + os.path.basename(sys.argv[0]) + \
- "\" shortdesc=\"" + docs["shortdesc"] + "\" >"
+ print("<?xml version=\"1.0\" ?>")
+ print("<resource-agent name=\"" + os.path.basename(sys.argv[0]) + \
+ "\" shortdesc=\"" + docs["shortdesc"] + "\" >")
for (symlink, desc) in docs.get("symlink", []):
- print "<symlink name=\"" + symlink + "\" shortdesc=\"" + desc + "\"/>"
- print "<longdesc>" + docs["longdesc"] + "</longdesc>"
- print "<vendor-url>" + docs["vendorurl"] + "</vendor-url>"
- print "<parameters>"
+ print("<symlink name=\"" + symlink + "\" shortdesc=\"" + desc + "\"/>")
+ print("<longdesc>" + docs["longdesc"] + "</longdesc>")
+ print("<vendor-url>" + docs["vendorurl"] + "</vendor-url>")
+ print("<parameters>")
for option, _ in sorted_list:
- if all_opt[option].has_key("help") and len(all_opt[option]["help"]) > 0:
- print "\t<parameter name=\"" + option + "\" unique=\"0\" required=\"" + all_opt[option]["required"] + "\">"
+ if "help" in all_opt[option] and len(all_opt[option]["help"]) > 0:
+ print("\t<parameter name=\"" + option + "\" unique=\"0\" required=\"" + all_opt[option]["required"] + "\">")
default = ""
- if all_opt[option].has_key("default"):
+ if "default" in all_opt[option]:
default = "default=\"" + _encode_html_entities(str(all_opt[option]["default"])) + "\" "
mixed = all_opt[option]["help"]
@@ -570,32 +568,32 @@ def metadata(avail_opt, docs):
else:
shortdesc = all_opt[option]["shortdesc"]
- print "\t\t<getopt mixed=\"" + mixed + "\" />"
- if all_opt[option].has_key("choices"):
- print "\t\t<content type=\"select\" "+default+" >"
+ print("\t\t<getopt mixed=\"" + mixed + "\" />")
+ if "choices" in all_opt[option]:
+ print("\t\t<content type=\"select\" "+default+" >")
for choice in all_opt[option]["choices"]:
- print "\t\t\t<option value=\"%s\" />" % (choice)
- print "\t\t</content>"
+ print("\t\t\t<option value=\"%s\" />" % (choice))
+ print("\t\t</content>")
elif all_opt[option]["getopt"].count(":") > 0:
- print "\t\t<content type=\"string\" "+default+" />"
+ print("\t\t<content type=\"string\" "+default+" />")
else:
- print "\t\t<content type=\"boolean\" "+default+" />"
- print "\t\t<shortdesc lang=\"en\">" + shortdesc + "</shortdesc>"
- print "\t</parameter>"
- print "</parameters>"
- print "<actions>"
+ print("\t\t<content type=\"boolean\" "+default+" />")
+ print("\t\t<shortdesc lang=\"en\">" + shortdesc + "</shortdesc>")
+ print("\t</parameter>")
+ print("</parameters>")
+ print("<actions>")
(available_actions, _) = _get_available_actions(avail_opt)
if "on" in available_actions:
available_actions.remove("on")
on_target = ' on_target="1"' if avail_opt.count("on_target") else ''
- print "\t<action name=\"on\"%s automatic=\"%d\"/>" % (on_target, avail_opt.count("fabric_fencing"))
+ print("\t<action name=\"on\"%s automatic=\"%d\"/>" % (on_target, avail_opt.count("fabric_fencing")))
for action in available_actions:
- print "\t<action name=\"%s\" />" % (action)
- print "</actions>"
- print "</resource-agent>"
+ print("\t<action name=\"%s\" />" % (action))
+ print("</actions>")
+ print("</resource-agent>")
def process_input(avail_opt):
avail_opt.extend(_add_dependency_options(avail_opt))
@@ -638,10 +636,10 @@ def check_input(device_opt, opt, other_conditions = False):
if options["--action"] == "meta-data":
options["--action"] = "metadata"
- if options["--action"] == "metadata" or any(options.has_key(k) for k in ("--help", "--version")):
+ if options["--action"] == "metadata" or any(k in options for k in ("--help", "--version")):
return options
- if options.has_key("--verbose"):
+ if "--verbose" in options:
logging.getLogger().setLevel(logging.DEBUG)
## add logging to syslog
@@ -671,7 +669,7 @@ def check_input(device_opt, opt, other_conditions = False):
else:
_validate_input(options, True)
- if options.has_key("--debug-file"):
+ if "--debug-file" in options:
try:
debug_file = logging.FileHandler(options["--debug-file"])
debug_file.setLevel(logging.DEBUG)
@@ -680,10 +678,10 @@ def check_input(device_opt, opt, other_conditions = False):
logging.error("Unable to create file %s", options["--debug-file"])
fail_usage("Failed: Unable to create file " + options["--debug-file"])
- if options.has_key("--snmp-priv-passwd-script"):
+ if "--snmp-priv-passwd-script" in options:
options["--snmp-priv-passwd"] = os.popen(options["--snmp-priv-passwd-script"]).read().rstrip()
- if options.has_key("--password-script"):
+ if "--password-script" in options:
options["--password"] = os.popen(options["--password-script"]).read().rstrip()
return options
@@ -693,7 +691,7 @@ def check_input(device_opt, opt, other_conditions = False):
######
def get_multi_power_fn(connection, options, get_power_fn):
status = "off"
- plugs = options["--plugs"] if options.has_key("--plugs") else [""]
+ plugs = options["--plugs"] if "--plugs" in options else [""]
for plug in plugs:
try:
@@ -711,7 +709,7 @@ def get_multi_power_fn(connection, options, get_power_fn):
return status
def set_multi_power_fn(connection, options, set_power_fn, get_power_fn, retry_attempts=1):
- plugs = options["--plugs"] if options.has_key("--plugs") else [""]
+ plugs = options["--plugs"] if "--plugs" in options else [""]
for _ in range(retry_attempts):
for plug in plugs:
@@ -726,7 +724,7 @@ def set_multi_power_fn(connection, options, set_power_fn, get_power_fn, retry_at
set_power_fn(connection, options)
time.sleep(int(options["--power-wait"]))
- for _ in xrange(int(options["--power-timeout"])):
+ for _ in range(int(options["--power-timeout"])):
if get_multi_power_fn(connection, options, get_power_fn) != options["--action"]:
time.sleep(1)
else:
@@ -741,7 +739,7 @@ def show_docs(options, docs=None):
docs["shortdesc"] = "Fence agent"
docs["longdesc"] = ""
- if options.has_key("--help"):
+ if "--help" in options:
usage(device_opt)
sys.exit(0)
@@ -751,16 +749,16 @@ def show_docs(options, docs=None):
metadata(device_opt, docs)
sys.exit(0)
- if options.has_key("--version"):
- print __main__.RELEASE_VERSION, __main__.BUILD_DATE
- print __main__.REDHAT_COPYRIGHT
+ if "--version" in options:
+ print(__main__.RELEASE_VERSION, __main__.BUILD_DATE)
+ print(__main__.REDHAT_COPYRIGHT)
sys.exit(0)
def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_list=None, reboot_cycle_fn=None):
result = 0
try:
- if options.has_key("--plug"):
+ if "--plug" in options:
options["--plugs"] = options["--plug"].split(",")
## Process options that manipulate fencing device
@@ -770,12 +768,12 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
0 == options["device_opt"].count("port_as_ip")):
if 0 == options["device_opt"].count("port"):
- print "N/A"
+ print("N/A")
elif get_outlet_list == None:
## @todo: exception?
## This is just temporal solution, we will remove default value
## None as soon as all existing agent will support this operation
- print "NOTICE: List option is not working on this device yet"
+ print("NOTICE: List option is not working on this device yet")
else:
options["--original-action"] = options["--action"]
options["--action"] = "list"
@@ -784,16 +782,16 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
del options["--original-action"]
## keys can be numbers (port numbers) or strings (names of VM, UUID)
- for outlet_id in outlets.keys():
+ for outlet_id in list(outlets.keys()):
(alias, status) = outlets[outlet_id]
if status is None or (not status.upper() in ["ON", "OFF"]):
status = "UNKNOWN"
status = status.upper()
if options["--action"] == "list":
- print outlet_id + options["--separator"] + alias
+ print(outlet_id + options["--separator"] + alias)
elif options["--action"] == "list-status":
- print outlet_id + options["--separator"] + alias + options["--separator"] + status
+ print(outlet_id + options["--separator"] + alias + options["--separator"] + status)
return
@@ -809,17 +807,17 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
if options["--action"] == status:
if not (status == "on" and "force_on" in options["device_opt"]):
- print "Success: Already %s" % (status.upper())
+ print("Success: Already %s" % (status.upper()))
return 0
if options["--action"] == "on":
if set_multi_power_fn(connection, options, set_power_fn, get_power_fn, 1 + int(options["--retry-on"])):
- print "Success: Powered ON"
+ print("Success: Powered ON")
else:
fail(EC_WAITING_ON)
elif options["--action"] == "off":
if set_multi_power_fn(connection, options, set_power_fn, get_power_fn):
- print "Success: Powered OFF"
+ print("Success: Powered OFF")
else:
fail(EC_WAITING_OFF)
elif options["--action"] == "reboot":
@@ -843,7 +841,7 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
try:
power_on = set_multi_power_fn(connection, options, set_power_fn, get_power_fn, int(options["--retry-on"]))
- except Exception, ex:
+ except Exception as ex:
# an error occured during power ON phase in reboot
# fence action was completed succesfully even in that case
logging.warning("%s", str(ex))
@@ -852,9 +850,9 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
# this should not fail as node was fenced succesfully
logging.error('Timed out waiting to power ON\n')
- print "Success: Rebooted"
+ print("Success: Rebooted")
elif options["--action"] == "status":
- print "Status: " + status.upper()
+ print("Status: " + status.upper())
if status.upper() == "OFF":
result = 2
elif options["--action"] == "monitor":
@@ -863,10 +861,10 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
fail(EC_CONNECTION_LOST)
except pexpect.TIMEOUT:
fail(EC_TIMED_OUT)
- except pycurl.error, ex:
+ except pycurl.error as ex:
logging.error("%s\n", str(ex))
fail(EC_TIMED_OUT)
- except socket.timeout, ex:
+ except socket.timeout as ex:
logging.error("%s\n", str(ex))
fail(EC_TIMED_OUT)
@@ -875,25 +873,25 @@ def fence_action(connection, options, set_power_fn, get_power_fn, get_outlet_lis
def fence_login(options, re_login_string=r"(login\s*: )|((?!Last )Login Name: )|(username: )|(User Name :)"):
run_delay(options)
- if not options.has_key("eol"):
+ if "eol" not in options:
options["eol"] = "\r\n"
- if options.has_key("--command-prompt") and type(options["--command-prompt"]) is not list:
+ if "--command-prompt" in options and type(options["--command-prompt"]) is not list:
options["--command-prompt"] = [options["--command-prompt"]]
try:
- if options.has_key("--ssl"):
+ if "--ssl" in options:
conn = _open_ssl_connection(options)
- elif options.has_key("--ssh") and not options.has_key("--identity-file"):
+ elif "--ssh" in options and "--identity-file" not in options:
conn = _login_ssh_with_password(options, re_login_string)
- elif options.has_key("--ssh") and options.has_key("--identity-file"):
+ elif "--ssh" in options and "--identity-file" in options:
conn = _login_ssh_with_identity_file(options)
else:
conn = _login_telnet(options, re_login_string)
- except pexpect.EOF, exception:
+ except pexpect.EOF as exception:
logging.debug("%s", str(exception))
fail(EC_LOGIN_DENIED)
- except pexpect.TIMEOUT, exception:
+ except pexpect.TIMEOUT as exception:
logging.debug("%s", str(exception))
fail(EC_LOGIN_DENIED)
return conn
@@ -953,7 +951,7 @@ def fence_logout(conn, logout_string, sleep=0):
conn.send_eol(logout_string)
time.sleep(sleep)
conn.close()
- except exceptions.OSError:
+ except OSError:
pass
except pexpect.ExceptionPexpect:
pass
@@ -989,29 +987,29 @@ def _open_ssl_connection(options):
gnutls_opts = ""
ssl_opts = ""
- if options.has_key("--notls"):
+ if "--notls" in options:
gnutls_opts = "--priority \"NORMAL:-VERS-TLS1.2:-VERS-TLS1.1:-VERS-TLS1.0:+VERS-SSL3.0\""
- elif options.has_key("--tls1.0"):
+ elif "--tls1.0" in options:
gnutls_opts = "--priority \"NORMAL:-VERS-TLS1.2:-VERS-TLS1.1:+VERS-TLS1.0:%LATEST_RECORD_VERSION\""
# --ssl is same as the --ssl-secure; it means we want to verify certificate in these cases
- if options.has_key("--ssl-insecure"):
+ if "--ssl-insecure" in options:
ssl_opts = "--insecure"
command = '%s %s %s --crlf -p %s %s' % \
(options["--gnutlscli-path"], gnutls_opts, ssl_opts, options["--ipport"], options["--ip"])
try:
conn = fspawn(options, command)
- except pexpect.ExceptionPexpect, ex:
+ except pexpect.ExceptionPexpect as ex:
logging.error("%s\n", str(ex))
sys.exit(EC_GENERIC_ERROR)
return conn
def _login_ssh_with_identity_file(options):
- if options.has_key("--inet6-only"):
+ if "--inet6-only" in options:
force_ipvx = "-6 "
- elif options.has_key("--inet4-only"):
+ elif "--inet4-only" in options:
force_ipvx = "-4 "
else:
force_ipvx = ""
@@ -1019,7 +1017,7 @@ def _login_ssh_with_identity_file(options):
command = '%s %s %s@%s -i %s -p %s' % \
(options["--ssh-path"], force_ipvx, options["--username"], options["--ip"], \
options["--identity-file"], options["--ipport"])
- if options.has_key("--ssh-options"):
+ if "--ssh-options" in options:
command += ' ' + options["--ssh-options"]
conn = fspawn(options, command)
@@ -1033,7 +1031,7 @@ def _login_ssh_with_identity_file(options):
["Enter passphrase for key '" + options["--identity-file"]+"':"] + \
options["--command-prompt"], int(options["--login-timeout"]))
if result == 0:
- if options.has_key("--password"):
+ if "--password" in options:
conn.sendline(options["--password"])
conn.log_expect(options["--command-prompt"], int(options["--login-timeout"]))
else:
@@ -1086,21 +1084,21 @@ def _login_ssh_with_password(options, re_login_string):
re_login = re.compile(re_login_string, re.IGNORECASE)
re_pass = re.compile("(password)|(pass phrase)", re.IGNORECASE)
- if options.has_key("--inet6-only"):
+ if "--inet6-only" in options:
force_ipvx = "-6 "
- elif options.has_key("--inet4-only"):
+ elif "--inet4-only" in options:
force_ipvx = "-4 "
else:
force_ipvx = ""
command = '%s %s %s@%s -p %s -o PubkeyAuthentication=no' % \
(options["--ssh-path"], force_ipvx, options["--username"], options["--ip"], options["--ipport"])
- if options.has_key("--ssh-options"):
+ if "--ssh-options" in options:
command += ' ' + options["--ssh-options"]
conn = fspawn(options, command)
- if options.has_key("telnet_over_ssh"):
+ if "telnet_over_ssh" in options:
# This is for stupid ssh servers (like ALOM) which behave more like telnet
# (ignore name and display login prompt)
result = conn.log_expect( \
@@ -1151,7 +1149,7 @@ def _update_metadata(options):
default_value = None
default_string = None
- if all_opt["ipport"].has_key("default"):
+ if "default" in all_opt["ipport"]:
default_value = all_opt["ipport"]["default"]
elif device_opt.count("web") and device_opt.count("ssl"):
default_value = "80"
@@ -1195,9 +1193,9 @@ def _set_default_values(options):
all_opt["ipport"]["default"] = options["--ipport"]
for opt in options["device_opt"]:
- if all_opt[opt].has_key("default") and not opt == "ipport":
+ if "default" in all_opt[opt] and not opt == "ipport":
getopt_long = "--" + all_opt[opt]["longopt"]
- if not options.has_key(getopt_long):
+ if getopt_long not in options:
options[getopt_long] = all_opt[opt]["default"]
return options
@@ -1207,42 +1205,42 @@ def _validate_input(options, stop = True):
device_opt = options["device_opt"]
valid_input = True
- if not options.has_key("--username") and \
+ if "--username" not in options and \
device_opt.count("login") and (device_opt.count("no_login") == 0):
valid_input = False
fail_usage("Failed: You have to set login name", stop)
- if device_opt.count("ipaddr") and not options.has_key("--ip") and not options.has_key("--managed"):
+ if device_opt.count("ipaddr") and "--ip" not in options and "--managed" not in options:
valid_input = False
fail_usage("Failed: You have to enter fence address", stop)
if device_opt.count("no_password") == 0:
if 0 == device_opt.count("identity_file"):
- if not (options.has_key("--password") or options.has_key("--password-script")):
+ if not ("--password" in options or "--password-script" in options):
valid_input = False
fail_usage("Failed: You have to enter password or password script", stop)
else:
- if not (options.has_key("--password") or \
- options.has_key("--password-script") or options.has_key("--identity-file")):
+ if not ("--password" in options or \
+ "--password-script" in options or "--identity-file" in options):
valid_input = False
fail_usage("Failed: You have to enter password, password script or identity file", stop)
- if not options.has_key("--ssh") and options.has_key("--identity-file"):
+ if "--ssh" not in options and "--identity-file" in options:
valid_input = False
fail_usage("Failed: You have to use identity file together with ssh connection (-x)", stop)
- if options.has_key("--identity-file") and not os.path.isfile(options["--identity-file"]):
+ if "--identity-file" in options and not os.path.isfile(options["--identity-file"]):
valid_input = False
fail_usage("Failed: Identity file " + options["--identity-file"] + " does not exist", stop)
if (0 == ["list", "list-status", "monitor"].count(options["--action"])) and \
- not options.has_key("--plug") and device_opt.count("port") and \
+ "--plug" not in options and device_opt.count("port") and \
device_opt.count("no_port") == 0 and not device_opt.count("port_as_ip"):
valid_input = False
fail_usage("Failed: You have to enter plug number or machine identification", stop)
- if options.has_key("--plug") and len(options["--plug"].split(",")) > 1 and \
- options.has_key("--method") and options["--method"] == "cycle":
+ if "--plug" in options and len(options["--plug"].split(",")) > 1 and \
+ "--method" in options and options["--method"] == "cycle":
valid_input = False
fail_usage("Failed: Cannot use --method cycle for more than 1 plug", stop)
@@ -1261,13 +1259,13 @@ def _prepare_getopt_args(options):
getopt_string = ""
longopt_list = []
for k in options:
- if all_opt.has_key(k) and all_opt[k]["getopt"] != ":":
+ if k in all_opt and all_opt[k]["getopt"] != ":":
# getopt == ":" means that opt is without short getopt, but has value
getopt_string += all_opt[k]["getopt"]
- elif not all_opt.has_key(k):
+ elif k not in all_opt:
fail_usage("Parse error: unknown option '"+k+"'")
- if all_opt.has_key(k) and all_opt[k].has_key("longopt"):
+ if k in all_opt and "longopt" in all_opt[k]:
if all_opt[k]["getopt"].endswith(":"):
longopt_list.append(all_opt[k]["longopt"] + "=")
else:
@@ -1309,7 +1307,7 @@ def _parse_input_cmdline(avail_opt):
(entered_opt, left_arg) = getopt.gnu_getopt(sys.argv[1:], getopt_string, longopt_list)
if len(left_arg) > 0:
logging.warning("Unused arguments on command line: %s" % (str(left_arg)))
- except getopt.GetoptError, error:
+ except getopt.GetoptError as error:
fail_usage("Parse error: " + error.msg)
for opt in avail_opt:
@@ -1317,8 +1315,8 @@ def _parse_input_cmdline(avail_opt):
# Short and long getopt names are changed to consistent "--" + long name (e.g. --username)
long_opts = {}
- for arg_name in dict(entered_opt).keys():
- all_key = [key for (key, value) in filtered_opts.items() \
+ for arg_name in list(dict(entered_opt).keys()):
+ all_key = [key for (key, value) in list(filtered_opts.items()) \
if "--" + value.get("longopt", "") == arg_name or "-" + value.get("getopt", "").rstrip(":") == arg_name][0]
long_opts["--" + filtered_opts[all_key]["longopt"]] = dict(entered_opt)[arg_name]
@@ -1353,10 +1351,10 @@ def _get_opts_with_invalid_choices(options):
device_opt = options["device_opt"]
for opt in device_opt:
- if all_opt[opt].has_key("choices"):
+ if "choices" in all_opt[opt]:
longopt = "--" + all_opt[opt]["longopt"]
possible_values_upper = [y.upper() for y in all_opt[opt]["choices"]]
- if options.has_key(longopt):
+ if longopt in options:
options[longopt] = options[longopt].upper()
if not options["--" + all_opt[opt]["longopt"]] in possible_values_upper:
options_failed.append(opt)
diff --git a/fence/agents/lib/fencing_snmp.py.py b/fence/agents/lib/fencing_snmp.py.py
index 88700c4..9aaf52b 100644
--- a/fence/agents/lib/fencing_snmp.py.py
+++ b/fence/agents/lib/fencing_snmp.py.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# For example of use please see fence_cisco_mds
@@ -39,11 +39,11 @@ class FencingSnmp:
res = True
for item in e:
- if item[0] == '!' and self.options.has_key("--" + item[1:]):
+ if item[0] == '!' and "--" + item[1:] in self.options:
res = False
break
- if item[0] != '!' and not self.options.has_key("--" + item[0:]):
+ if item[0] != '!' and "--" + item[0:] not in self.options:
res = False
break
@@ -59,28 +59,28 @@ class FencingSnmp:
mapping = (('snmp-version', 'v'), ('community', 'c'))
for item in mapping:
- if self.options.has_key("--" + item[0]):
+ if "--" + item[0] in self.options:
cmd += " -%s '%s'"% (item[1], self.quote_for_run(self.options["--" + item[0]]))
# Some options make sense only for v3 (and for v1/2c can cause "problems")
- if (self.options.has_key("--snmp-version")) and (self.options["--snmp-version"] == "3"):
+ if ("--snmp-version" in self.options) and (self.options["--snmp-version"] == "3"):
# Mapping from our options to snmpcmd options for v3
mapping_v3 = (('snmp-auth-prot', 'a'), ('snmp-sec-level', 'l'), ('snmp-priv-prot', 'x'), \
('snmp-priv-passwd', 'X'), ('password', 'A'), ('username', 'u'))
for item in mapping_v3:
- if self.options.has_key("--"+item[0]):
+ if "--"+item[0] in self.options:
cmd += " -%s '%s'"% (item[1], self.quote_for_run(self.options["--" + item[0]]))
force_ipvx = ""
- if self.options.has_key("--inet6-only"):
+ if "--inet6-only" in self.options:
force_ipvx = "udp6:"
- if self.options.has_key("--inet4-only"):
+ if "--inet4-only" in self.options:
force_ipvx = "udp:"
cmd += " '%s%s%s'"% (force_ipvx, self.quote_for_run(self.options["--ip"]),
- self.options.has_key("--ipport") and self.quote_for_run(":" + str(self.options["--ipport"])) or "")
+ "--ipport" in self.options and self.quote_for_run(":" + str(self.options["--ipport"])) or "")
return cmd
def run_command(self, command, additional_timemout=0):
diff --git a/fence/agents/lpar/Makefile.am b/fence/agents/lpar/Makefile.am
deleted file mode 100644
index ae4fb5e..0000000
--- a/fence/agents/lpar/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_lpar
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1 --managed 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/lpar/Makefile.in b/fence/agents/lpar/Makefile.in
deleted file mode 100644
index fce349d..0000000
--- a/fence/agents/lpar/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/lpar
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_lpar
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1 --managed 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/lpar/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/lpar/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/lpar/fence_lpar.py b/fence/agents/lpar/fence_lpar.py
index 6676e1c..26111ce 100644
--- a/fence/agents/lpar/fence_lpar.py
+++ b/fence/agents/lpar/fence_lpar.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -141,7 +141,7 @@ def main():
docs["vendorurl"] = "http://www.ibm.com"
show_docs(options, docs)
- if not options.has_key("--managed"):
+ if "--managed" not in options:
fail_usage("Failed: You have to enter name of managed system")
if options["--action"] == "validate-all":
diff --git a/fence/agents/manual/Makefile.am b/fence/agents/manual/Makefile.am
deleted file mode 100644
index 1eb2971..0000000
--- a/fence/agents/manual/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ack_manual
-
-sbin_SCRIPTS = $(TARGET)
-
-EXTRA_DIST = $(TARGET).in
-
-dist_man_MANS = $(TARGET).8
-
-$(TARGET): $(TARGET).in
- cat $^ | sed \
- -e 's#@clustervarrun@#${CLUSTERVARRUN}#g' \
- > $@
-
-clean-local:
- rm -f $(TARGET)
diff --git a/fence/agents/manual/Makefile.in b/fence/agents/manual/Makefile.in
deleted file mode 100644
index b21f34d..0000000
--- a/fence/agents/manual/Makefile.in
+++ /dev/null
@@ -1,595 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/manual
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(dist_man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ack_manual
-sbin_SCRIPTS = $(TARGET)
-EXTRA_DIST = $(TARGET).in
-dist_man_MANS = $(TARGET).8
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/manual/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/manual/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(dist_man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(dist_man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-$(TARGET): $(TARGET).in
- cat $^ | sed \
- -e 's#@clustervarrun@#${CLUSTERVARRUN}#g' \
- > $@
-
-clean-local:
- rm -f $(TARGET)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/mpath/Makefile.am b/fence/agents/mpath/Makefile.am
deleted file mode 100644
index fd3d8d2..0000000
--- a/fence/agents/mpath/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_mpath
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -k 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/mpath/Makefile.in b/fence/agents/mpath/Makefile.in
deleted file mode 100644
index 01b3d92..0000000
--- a/fence/agents/mpath/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/mpath
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_mpath
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -k 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/mpath/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/mpath/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/mpath/fence_mpath.py b/fence/agents/mpath/fence_mpath.py
index f990d7e..349225f 100644
--- a/fence/agents/mpath/fence_mpath.py
+++ b/fence/agents/mpath/fence_mpath.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import stat
@@ -83,7 +83,7 @@ def set_status(conn, options):
def run_cmd(options, cmd):
ret = {}
- if options.has_key("--use-sudo"):
+ if "--use-sudo" in options:
prefix = options["--sudo-path"] + " "
else:
prefix = ""
@@ -169,7 +169,7 @@ def define_new_opts():
"help" : "-d, --devices=[devices] List of devices to use for current operation",
"required" : "1",
"shortdesc" : "List of devices to use for current operation. Devices can \
-be comma-separated list of device-mapper multipath devices (eg. /dev/dm-3). \
+be comma-separated list of device-mapper multipath devices (eg. /dev/mapper/3600508b400105df70000e00000ac0000 or /dev/mapper/mpath1). \
Each device must support SCSI-3 persistent reservations.",
"order": 1
}
diff --git a/fence/agents/netio/Makefile.am b/fence/agents/netio/Makefile.am
deleted file mode 100644
index 8820b8e..0000000
--- a/fence/agents/netio/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_netio
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/netio/Makefile.in b/fence/agents/netio/Makefile.in
deleted file mode 100644
index a259688..0000000
--- a/fence/agents/netio/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/netio
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_netio
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/netio/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/netio/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/netio/fence_netio.py b/fence/agents/netio/fence_netio.py
index 7b67e15..6dc6a1a 100755
--- a/fence/agents/netio/fence_netio.py
+++ b/fence/agents/netio/fence_netio.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re, pexpect
import atexit
@@ -47,8 +47,8 @@ def get_outlet_list(conn, options):
# the name is enclosed in "", drop those with [1:-1]
name = conn.after.split()[1][1:-1]
result[plug] = (name, "unknown")
- except Exception, exn:
- print str(exn)
+ except Exception as exn:
+ print(str(exn))
return result
diff --git a/fence/agents/ovh/Makefile.am b/fence/agents/ovh/Makefile.am
deleted file mode 100644
index 3793562..0000000
--- a/fence/agents/ovh/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_ovh
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -n 1 --email test at test.te
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/ovh/Makefile.in b/fence/agents/ovh/Makefile.in
deleted file mode 100644
index 0b350fb..0000000
--- a/fence/agents/ovh/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/ovh
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_ovh
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -n 1 --email test at test.te
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/ovh/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/ovh/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/ovh/fence_ovh.py b/fence/agents/ovh/fence_ovh.py
index de5333c..f5403c5 100644
--- a/fence/agents/ovh/fence_ovh.py
+++ b/fence/agents/ovh/fence_ovh.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# Copyright 2013 Adrian Gibanel Lopez (bTactic)
# Adrian Gibanel improved this script at 2013 to add verification of success and to output metadata
@@ -98,7 +98,7 @@ Poweroff is simulated with a reboot into rescue-pro mode."
if options["--action"] == "list-status":
fail_usage("Action 'list-status' is not supported in this fence agent")
- if not options.has_key("--email"):
+ if "--email" not in options:
fail_usage("You have to enter e-mail address which is notified by fence agent")
if options["--action"] == "validate-all":
diff --git a/fence/agents/pve/Makefile.am b/fence/agents/pve/Makefile.am
deleted file mode 100644
index 792ec24..0000000
--- a/fence/agents/pve/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_pve
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/pve/Makefile.in b/fence/agents/pve/Makefile.in
deleted file mode 100644
index b7697b0..0000000
--- a/fence/agents/pve/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/pve
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_pve
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/pve/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/pve/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/pve/fence_pve.py b/fence/agents/pve/fence_pve.py
index 39d0e86..3867047 100755
--- a/fence/agents/pve/fence_pve.py
+++ b/fence/agents/pve/fence_pve.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# This agent uses Proxmox VE API
# Thanks to Frank Brendel (author of original perl fence_pve)
@@ -7,13 +7,15 @@
import sys
import json
import pycurl
-import StringIO
-import urllib
+import io
import atexit
import logging
sys.path.append("@FENCEAGENTSLIBDIR@")
from fencing import fail, EC_LOGIN_DENIED, atexit_handler, all_opt, check_input, process_input, show_docs, fence_action, run_delay
+if sys.version_info.major > 2: import urllib.parse as urllib
+else: import urllib
+
#BEGIN_VERSION_GENERATION
RELEASE_VERSION=""
BUILD_DATE=""
@@ -94,7 +96,7 @@ def get_ticket(options):
def send_cmd(options, cmd, post=None):
url = options["url"] + cmd
conn = pycurl.Curl()
- output_buffer = StringIO.StringIO()
+ output_buffer = io.StringIO()
if logging.getLogger().getEffectiveLevel() < logging.WARNING:
conn.setopt(pycurl.VERBOSE, True)
conn.setopt(pycurl.HTTPGET, 1)
@@ -103,10 +105,13 @@ def send_cmd(options, cmd, post=None):
conn.setopt(pycurl.COOKIE, options["auth"]["ticket"])
conn.setopt(pycurl.HTTPHEADER, [options["auth"]["CSRF_token"]])
if post is not None:
- conn.setopt(pycurl.POSTFIELDS, urllib.urlencode(post))
+ if "skiplock" in post:
+ conn.setopt(conn.CUSTOMREQUEST, 'POST')
+ else:
+ conn.setopt(pycurl.POSTFIELDS, urllib.urlencode(post))
conn.setopt(pycurl.WRITEFUNCTION, output_buffer.write)
conn.setopt(pycurl.TIMEOUT, int(options["--shell-timeout"]))
- if options.has_key("--ssl") or options.has_key("--ssl-secure"):
+ if "--ssl" in options or "--ssl-secure" in options:
conn.setopt(pycurl.SSL_VERIFYPEER, 1)
conn.setopt(pycurl.SSL_VERIFYHOST, 2)
else:
diff --git a/fence/agents/raritan/Makefile.am b/fence/agents/raritan/Makefile.am
deleted file mode 100644
index bd751d0..0000000
--- a/fence/agents/raritan/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_raritan
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/raritan/Makefile.in b/fence/agents/raritan/Makefile.in
deleted file mode 100644
index 3861fda..0000000
--- a/fence/agents/raritan/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/raritan
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_raritan
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/raritan/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/raritan/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/raritan/fence_raritan.py b/fence/agents/raritan/fence_raritan.py
index 502742e..36f2bea 100644
--- a/fence/agents/raritan/fence_raritan.py
+++ b/fence/agents/raritan/fence_raritan.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re, pexpect
import atexit
diff --git a/fence/agents/rcd_serial/Makefile.am b/fence/agents/rcd_serial/Makefile.am
deleted file mode 100644
index c1a1c79..0000000
--- a/fence/agents/rcd_serial/Makefile.am
+++ /dev/null
@@ -1,20 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_rcd_serial
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS =
-
-fence_rcd_serial_check: $(TARGET)
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
-
diff --git a/fence/agents/rcd_serial/Makefile.in b/fence/agents/rcd_serial/Makefile.in
deleted file mode 100644
index 3f26920..0000000
--- a/fence/agents/rcd_serial/Makefile.in
+++ /dev/null
@@ -1,671 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/rcd_serial
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_rcd_serial
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS =
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/rcd_serial/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/rcd_serial/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-fence_rcd_serial_check: $(TARGET)
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/rcd_serial/fence_rcd_serial.py b/fence/agents/rcd_serial/fence_rcd_serial.py
index 104efb9..0148951 100644
--- a/fence/agents/rcd_serial/fence_rcd_serial.py
+++ b/fence/agents/rcd_serial/fence_rcd_serial.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# Copyright 2015 Infoxchange, Danielle Madeley, Sam McLeod-Jones
@@ -78,6 +78,7 @@ def main():
all_opt["method"]["default"] = "cycle"
all_opt["power_wait"]["default"] = "2"
+ all_opt["method"]["help"] = "-m, --method=[method] Method to fence (onoff|cycle) (Default: cycle)"
options = check_input(device_opt, process_input(device_opt))
diff --git a/fence/agents/rhevm/Makefile.am b/fence/agents/rhevm/Makefile.am
deleted file mode 100644
index e50d747..0000000
--- a/fence/agents/rhevm/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_rhevm
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/rhevm/Makefile.in b/fence/agents/rhevm/Makefile.in
deleted file mode 100644
index 4ef8b07..0000000
--- a/fence/agents/rhevm/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/rhevm
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_rhevm
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/rhevm/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/rhevm/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/rhevm/fence_rhevm.py b/fence/agents/rhevm/fence_rhevm.py
index 3926f3b..ee005b7 100644
--- a/fence/agents/rhevm/fence_rhevm.py
+++ b/fence/agents/rhevm/fence_rhevm.py
@@ -1,7 +1,7 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
-import pycurl, StringIO
+import pycurl, io
import logging
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
@@ -77,7 +77,7 @@ def get_list(conn, options):
def send_command(opt, command, method="GET"):
## setup correct URL
- if opt.has_key("--ssl") or opt.has_key("--ssl-secure") or opt.has_key("--ssl-insecure"):
+ if "--ssl" in opt or "--ssl-secure" in opt or "--ssl-insecure" in opt:
url = "https:"
else:
url = "http:"
@@ -86,24 +86,24 @@ def send_command(opt, command, method="GET"):
## send command through pycurl
conn = pycurl.Curl()
- web_buffer = StringIO.StringIO()
+ web_buffer = io.StringIO()
conn.setopt(pycurl.URL, url)
conn.setopt(pycurl.HTTPHEADER, ["Content-type: application/xml", "Accept: application/xml", "Prefer: persistent-auth", "Filter: true"])
- if opt.has_key("cookie"):
+ if "cookie" in opt:
conn.setopt(pycurl.COOKIE, opt["cookie"])
else:
conn.setopt(pycurl.HTTPAUTH, pycurl.HTTPAUTH_BASIC)
conn.setopt(pycurl.USERPWD, opt["--username"] + ":" + opt["--password"])
- if opt.has_key("--use-cookies"):
+ if "--use-cookies" in opt:
conn.setopt(pycurl.COOKIEFILE, "")
conn.setopt(pycurl.TIMEOUT, int(opt["--shell-timeout"]))
- if opt.has_key("--ssl") or opt.has_key("--ssl-secure"):
+ if "--ssl" in opt or "--ssl-secure" in opt:
conn.setopt(pycurl.SSL_VERIFYPEER, 1)
conn.setopt(pycurl.SSL_VERIFYHOST, 2)
- if opt.has_key("--ssl-insecure"):
+ if "--ssl-insecure" in opt:
conn.setopt(pycurl.SSL_VERIFYPEER, 0)
conn.setopt(pycurl.SSL_VERIFYHOST, 0)
@@ -113,7 +113,7 @@ def send_command(opt, command, method="GET"):
conn.setopt(pycurl.WRITEFUNCTION, web_buffer.write)
conn.perform()
- if not opt.has_key("cookie") and opt.has_key("--use-cookies"):
+ if "cookie" not in opt and "--use-cookies" in opt:
cookie = ""
for c in conn.getinfo(pycurl.INFO_COOKIELIST):
tokens = c.split("\t",7)
diff --git a/fence/agents/rsa/Makefile.am b/fence/agents/rsa/Makefile.am
deleted file mode 100644
index 2536c7c..0000000
--- a/fence/agents/rsa/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_rsa
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/rsa/Makefile.in b/fence/agents/rsa/Makefile.in
deleted file mode 100644
index 3937aad..0000000
--- a/fence/agents/rsa/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/rsa
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_rsa
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/rsa/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/rsa/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/rsa/fence_rsa.py b/fence/agents/rsa/fence_rsa.py
index 46f4bb9..7b24ea6 100644
--- a/fence/agents/rsa/fence_rsa.py
+++ b/fence/agents/rsa/fence_rsa.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
diff --git a/fence/agents/rsb/Makefile.am b/fence/agents/rsb/Makefile.am
deleted file mode 100644
index 5556020..0000000
--- a/fence/agents/rsb/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_rsb
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/rsb/Makefile.in b/fence/agents/rsb/Makefile.in
deleted file mode 100644
index 9dcb150..0000000
--- a/fence/agents/rsb/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/rsb
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_rsb
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/rsb/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/rsb/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/rsb/fence_rsb.py b/fence/agents/rsb/fence_rsb.py
index 2ee85fe..725398d 100755
--- a/fence/agents/rsb/fence_rsb.py
+++ b/fence/agents/rsb/fence_rsb.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, re
import atexit
@@ -47,7 +47,7 @@ def main():
opt = process_input(device_opt)
- if not opt.has_key("--ssh") and not opt.has_key("--ipport"):
+ if "--ssh" not in opt and "--ipport" not in opt:
# set default value like it should be set as usually
all_opt["ipport"]["default"] = "3172"
opt["--ipport"] = all_opt["ipport"]["default"]
diff --git a/fence/agents/sanbox2/Makefile.am b/fence/agents/sanbox2/Makefile.am
deleted file mode 100644
index f9c7c30..0000000
--- a/fence/agents/sanbox2/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_sanbox2
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/sanbox2/Makefile.in b/fence/agents/sanbox2/Makefile.in
deleted file mode 100644
index db55c64..0000000
--- a/fence/agents/sanbox2/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/sanbox2
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_sanbox2
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/sanbox2/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/sanbox2/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/sanbox2/fence_sanbox2.py b/fence/agents/sanbox2/fence_sanbox2.py
index efa7dc8..e298a3e 100644
--- a/fence/agents/sanbox2/fence_sanbox2.py
+++ b/fence/agents/sanbox2/fence_sanbox2.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -8,7 +8,7 @@
## +-----------------+---------------------------+
#####
-import sys, re, pexpect, exceptions
+import sys, re, pexpect
import logging
import atexit
sys.path.append("@FENCEAGENTSLIBDIR@")
@@ -146,7 +146,7 @@ because the connection will block any necessary fencing actions."
conn.send_eol("admin end")
conn.send_eol("exit\n")
conn.close()
- except exceptions.OSError:
+ except OSError:
pass
except pexpect.ExceptionPexpect:
pass
diff --git a/fence/agents/sbd/Makefile.am b/fence/agents/sbd/Makefile.am
deleted file mode 100644
index 36a8925..0000000
--- a/fence/agents/sbd/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_sbd
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -n test --devices test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/sbd/Makefile.in b/fence/agents/sbd/Makefile.in
deleted file mode 100644
index b9ba4a9..0000000
--- a/fence/agents/sbd/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/sbd
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_sbd
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -n test --devices test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/sbd/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/sbd/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/sbd/fence_sbd.py b/fence/agents/sbd/fence_sbd.py
index 7120c4d..d09b97e 100644
--- a/fence/agents/sbd/fence_sbd.py
+++ b/fence/agents/sbd/fence_sbd.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys, stat
import logging
@@ -177,7 +177,7 @@ def set_power_status(conn, options):
options -- options dictionary
Return Value:
- return_code -- return code (integer)
+ return_code -- action result (bool)
"""
target_status = options["--action"]
@@ -200,7 +200,7 @@ def set_power_status(conn, options):
logging.error("DETAIL: output on stdout was \"%s\"", out)
logging.error("DETAIL: output on stderr was \"%s\"", err)
- return return_code
+ return not bool(return_code)
def reboot_cycle(conn, options):
"""" trigger reboot by sbd messages
@@ -210,7 +210,7 @@ def reboot_cycle(conn, options):
options -- options dictionary
Return Value:
- return_code -- return code (integer)
+ return_code -- action result (bool)
"""
plug = options["--plug"]
@@ -219,7 +219,7 @@ def reboot_cycle(conn, options):
err = ""
(return_code, out, err) = send_sbd_message(conn, options, plug, "reset")
- return return_code
+ return not bool(return_code)
def get_power_status(conn, options):
"""Returns the status of a specific node.
@@ -239,7 +239,7 @@ def get_power_status(conn, options):
# We need to check if the specified plug / node a already a allocated slot
# on the device.
- if not nodelist.has_key(plug):
+ if plug not in nodelist:
logging.error("node \"%s\" not found in node list", plug)
else:
status = nodelist[plug][1]
@@ -373,7 +373,7 @@ which can be used in environments where sbd can be used (shared storage)."
show_docs(options, docs)
# We need to check if --devices is given and not empty.
- if not options.has_key("--devices"):
+ if "--devices" not in options:
fail_usage("No SBD devices specified. \
At least one SBD device is required.")
diff --git a/fence/agents/scsi/Makefile.am b/fence/agents/scsi/Makefile.am
deleted file mode 100644
index cb16d06..0000000
--- a/fence/agents/scsi/Makefile.am
+++ /dev/null
@@ -1,29 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_scsi
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-scsidatadir = $(CLUSTERDATA)
-scsidata_SCRIPTS = fence_scsi_check fence_scsi_check_hardreboot
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -k 1
-
-fence_scsi_check: $(TARGET)
- cp $^ $@
-
-fence_scsi_check_hardreboot: $(TARGET)
- cp $^ $@
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
-
-clean-local: clean-man
- rm -f $(TARGET) $(SYMTARGET) $(scsidata_SCRIPTS)
diff --git a/fence/agents/scsi/Makefile.in b/fence/agents/scsi/Makefile.in
deleted file mode 100644
index 7648faf..0000000
--- a/fence/agents/scsi/Makefile.in
+++ /dev/null
@@ -1,717 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/scsi
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(scsidatadir)" \
- "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS) $(scsidata_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_scsi
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-scsidatadir = $(CLUSTERDATA)
-scsidata_SCRIPTS = fence_scsi_check fence_scsi_check_hardreboot
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -k 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/scsi/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/scsi/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-install-scsidataSCRIPTS: $(scsidata_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(scsidata_SCRIPTS)'; test -n "$(scsidatadir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(scsidatadir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(scsidatadir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scsidatadir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scsidatadir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-scsidataSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(scsidata_SCRIPTS)'; test -n "$(scsidatadir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(scsidatadir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(scsidatadir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man install-scsidataSCRIPTS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS \
- uninstall-scsidataSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-scsidataSCRIPTS \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags-am uninstall uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS uninstall-scsidataSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-fence_scsi_check: $(TARGET)
- cp $^ $@
-
-fence_scsi_check_hardreboot: $(TARGET)
- cp $^ $@
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-clean-local: clean-man
- rm -f $(TARGET) $(SYMTARGET) $(scsidata_SCRIPTS)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/scsi/fence_scsi.py b/fence/agents/scsi/fence_scsi.py
index 1d188f2..d572ca3 100644
--- a/fence/agents/scsi/fence_scsi.py
+++ b/fence/agents/scsi/fence_scsi.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import stat
@@ -291,8 +291,8 @@ def define_new_opts():
"help" : "-d, --devices=[devices] List of devices to use for current operation",
"required" : "0",
"shortdesc" : "List of devices to use for current operation. Devices can \
-be comma-separated list of raw device (eg. /dev/sdc) or device-mapper multipath \
-devices (eg. /dev/dm-3). Each device must support SCSI-3 persistent reservations.",
+be comma-separated list of raw devices (eg. /dev/sdc). Each device must support SCSI-3 \
+persistent reservations.",
"order": 1
}
all_opt["nodename"] = {
@@ -432,7 +432,7 @@ def main():
options = check_input(device_opt, process_input(device_opt), other_conditions=True)
docs = {}
- docs["shortdesc"] = "Fence agent for SCSI persistentl reservation"
+ docs["shortdesc"] = "Fence agent for SCSI persistent reservation"
docs["longdesc"] = "fence_scsi is an I/O fencing agent that uses SCSI-3 \
persistent reservations to control access to shared storage devices. These \
devices must support SCSI-3 persistent reservations (SPC-3 or greater) as \
diff --git a/fence/agents/vbox/Makefile.am b/fence/agents/vbox/Makefile.am
deleted file mode 100644
index f335ba8..0000000
--- a/fence/agents/vbox/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_vbox
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/vbox/Makefile.in b/fence/agents/vbox/Makefile.in
deleted file mode 100644
index 967db6b..0000000
--- a/fence/agents/vbox/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/vbox
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_vbox
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/vbox/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/vbox/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/vbox/fence_vbox.py b/fence/agents/vbox/fence_vbox.py
index bed95ef..4347352 100644
--- a/fence/agents/vbox/fence_vbox.py
+++ b/fence/agents/vbox/fence_vbox.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following Agent Has Been Tested On:
#
diff --git a/fence/agents/virsh/Makefile.am b/fence/agents/virsh/Makefile.am
deleted file mode 100644
index 7dd0fa2..0000000
--- a/fence/agents/virsh/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_virsh
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/virsh/Makefile.in b/fence/agents/virsh/Makefile.in
deleted file mode 100644
index 242c79d..0000000
--- a/fence/agents/virsh/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/virsh
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_virsh
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/virsh/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/virsh/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/virsh/fence_virsh.py b/fence/agents/virsh/fence_virsh.py
index 643f31f..baa5ee0 100644
--- a/fence/agents/virsh/fence_virsh.py
+++ b/fence/agents/virsh/fence_virsh.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
# The Following Agent Has Been Tested On:
#
@@ -19,10 +19,10 @@ BUILD_DATE=""
#END_VERSION_GENERATION
def get_name_or_uuid(options):
- return options["--uuid"] if options.has_key("--uuid") else options["--plug"]
+ return options["--uuid"] if "--uuid" in options else options["--plug"]
def get_outlets_status(conn, options):
- if options.has_key("--use-sudo"):
+ if "--use-sudo" in options:
prefix = options["--sudo-path"] + " "
else:
prefix = ""
@@ -47,14 +47,14 @@ def get_outlets_status(conn, options):
return result
def get_power_status(conn, options):
- prefix = options["--sudo-path"] + " " if options.has_key("--use-sudo") else ""
+ prefix = options["--sudo-path"] + " " if "--use-sudo" in options else ""
conn.sendline(prefix + "virsh domstate %s" % (get_name_or_uuid(options)))
conn.log_expect(options["--command-prompt"], int(options["--shell-timeout"]))
for line in conn.before.splitlines():
if line.strip() in ["running", "blocked", "idle", "no state", "paused"]:
return "on"
- if "error: failed to get domain" in line.strip() and options.has_key("--missing-as-off"):
+ if "error: failed to get domain" in line.strip() and "--missing-as-off" in options:
return "off"
if "error:" in line.strip():
fail_usage("Failed: You have to enter existing name/UUID of virtual machine!")
@@ -62,7 +62,7 @@ def get_power_status(conn, options):
return "off"
def set_power_status(conn, options):
- prefix = options["--sudo-path"] + " " if options.has_key("--use-sudo") else ""
+ prefix = options["--sudo-path"] + " " if "--use-sudo" in options else ""
conn.sendline(prefix + "virsh %s " %
(options["--action"] == "on" and "start" or "destroy") + get_name_or_uuid(options))
diff --git a/fence/agents/vmware/Makefile.am b/fence/agents/vmware/Makefile.am
deleted file mode 100644
index e0cd910..0000000
--- a/fence/agents/vmware/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_vmware fence_vmware_helper
-
-SRC = fence_vmware.py fence_vmware_helper.pl
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = fence_vmware.8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
diff --git a/fence/agents/vmware/Makefile.in b/fence/agents/vmware/Makefile.in
deleted file mode 100644
index 7429ba0..0000000
--- a/fence/agents/vmware/Makefile.in
+++ /dev/null
@@ -1,638 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/vmware
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_vmware fence_vmware_helper
-SRC = fence_vmware.py fence_vmware_helper.pl
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = fence_vmware.8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/vmware/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/vmware/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/vmware/fence_vmware.py b/fence/agents/vmware/fence_vmware.py
index e252fe3..8bb061e 100644
--- a/fence/agents/vmware/fence_vmware.py
+++ b/fence/agents/vmware/fence_vmware.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#
# The Following agent has been tested on:
@@ -129,7 +129,7 @@ def vmware_prepare_command(options, add_login_params, additional_params):
if len(host_name_array) > 1:
res += "-P '%s' "% (quote_for_run(host_name_array[1]))
- if options.has_key("--vmware-datacenter") and vmware_internal_type == VMWARE_TYPE_ESX:
+ if "--vmware-datacenter" in options and vmware_internal_type == VMWARE_TYPE_ESX:
res += "--datacenter '%s' "% (quote_for_run(options["--vmware-datacenter"]))
if additional_params != "":
@@ -271,15 +271,15 @@ def vmware_check_vmware_type(options):
if options["--vmware_type"] == "esx":
vmware_internal_type = VMWARE_TYPE_ESX
- if not options.has_key("--exec"):
+ if "--exec" not in options:
options["--exec"] = VMHELPER_COMMAND
elif options["--vmware_type"] == "server2":
vmware_internal_type = VMWARE_TYPE_SERVER2
- if not options.has_key("--exec"):
+ if "--exec" not in options:
options["--exec"] = VMRUN_COMMAND
elif options["--vmware_type"] == "server1":
vmware_internal_type = VMWARE_TYPE_SERVER1
- if not options.has_key("--exec"):
+ if "--exec" not in options:
options["--exec"] = VMRUN_COMMAND
else:
fail_usage("vmware_type can be esx,server2 or server1!")
diff --git a/fence/agents/vmware/fence_vmware_helper.pl b/fence/agents/vmware/fence_vmware_helper.pl
deleted file mode 100644
index a0b5cea..0000000
--- a/fence/agents/vmware/fence_vmware_helper.pl
+++ /dev/null
@@ -1,276 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use warnings;
-
-my $ME = $0;
-
-END {
- defined fileno STDOUT or return;
- close STDOUT and return;
- warn "$ME: failed to close standard output: $!\n";
- $? ||= 1;
-}
-
-my ($RELEASE_VERSION, $REDHAT_COPYRIGHT, $BUILD_DATE);
-
-#BEGIN_VERSION_GENERATION
-$RELEASE_VERSION="";
-$REDHAT_COPYRIGHT="";
-$BUILD_DATE="";
-#END_VERSION_GENERATION
-
-#### FUNCTIONS #####
-# Show error message
-sub show_error {
- print STDERR @_;
-}
-
-sub my_exit {
- my ($exit_code)=@_;
-
- # Disconnect from server
- Util::disconnect();
-
- exit $exit_code;
-}
-
-# Convert one field (string) to format acceptable by DSV. This
-# means replace any : with \: and \ with \\.
-sub convert_field_to_dsv {
- my ($input_line)=@_;
-
- $input_line =~ s/([\\:])/\\$1/g;
- return $input_line
-}
-
-#### Global variables #####
-# Aditional options
-my %opts = (
- 'operation' => {
- type => "=s",
- help => "The operation to perform (on,off,list,status). "
- . "Operations on/off/status require name of the virtual machine",
- default => "list",
- required => 0,
- },
- 'vmname' => {
- type => "=s",
- help => "The name of the virtual machine",
- required => 0,
- },
- 'datacenter' => {
- type => "=s",
- help => "The name of the datacenter",
- required => 0,
- }
-);
-
-#################
-##### MAIN ######
-#################
-
-# Conditional use of VIRuntime
-eval "use VMware::VIRuntime;";
-
-if ($@) {
- show_error "Please install VI Perl API package to use this tool!\nPerl error: $@";
- exit 1;
-}
-
-# Parse options
-Opts::add_options(%opts);
-Opts::parse();
-Opts::validate();
-
-if (!(Opts::get_option('operation')=~/^(on|off|list|status)$/i)) {
- show_error "Operation should be on, off, list or status!\n";
- exit 2;
-}
-
-my $operation=lc(Opts::get_option('operation'));
-
-if (($operation ne 'list') && (!defined Opts::get_option('vmname'))) {
- show_error "Operation on, off, status require vmname parameter!\n";
- exit 2;
-}
-
-
-# Try connect to machine
-eval {
- Util::connect();
-};
-
-if ($@) {
- show_error "Cannot connect to server!\nVMware error:".$@;
- exit 3;
-}
-
-my ($datacenter, $datacenter_view, $vm_views,$vm);
-# We are connected to machine
-
-# If user want's datacenter, we must first find datacenter
-my %filter=(view_type => 'VirtualMachine');
-
-if( defined (Opts::get_option('datacenter')) ) {
- $datacenter = Opts::get_option('datacenter');
- $datacenter_view = Vim::find_entity_view(view_type => 'Datacenter',
- filter => { name => $datacenter });
- if (!$datacenter_view) {
- show_error "Cannot find datacenter ".$datacenter."!\n";
-
- my_exit 4;
- }
-
- $filter{'begin_entity'}=$datacenter_view;
-}
-
-if ($operation ne 'list') {
- $filter{'filter'}= {"config.name" => Opts::get_option('vmname')};
-}
-
-$vm_views = Vim::find_entity_views(%filter);
-
-my $found=0;
-
-# Traverse all found vm
-foreach $vm(@$vm_views) {
- if (($operation eq 'list') or ($operation eq 'status')) {
- if (!$vm->summary->config->template) {
- print convert_field_to_dsv($vm->name).":".
- convert_field_to_dsv($vm->summary->config->vmPathName).":".
- convert_field_to_dsv($vm->runtime->powerState->val).":".
- convert_field_to_dsv($vm->runtime->connectionState->val)."\n";
- }
- } elsif ($operation eq 'on') {
- eval {
- $vm->PowerOnVM();
- };
-
- if ($@) {
- # If error is SoapFault with InvalidPowerState, user maybe use some auto power on tool.
- # This is not error, warning is enought.
- if (ref($@) eq 'SoapFault') {
- if (ref($@->detail) eq 'InvalidPowerState') {
- show_error "Warning: Cannot power on vm (somebody done it before???) ".Opts::get_option('vmname').
- "!\nVMware error:".$@."\n";
- }
- } else {
- # Some other more serious problem
- show_error "Cannot power on vm ".Opts::get_option('vmname')."!\nVMware error:".$@."\n";
- my_exit 6;
- }
- }
- } elsif ($operation eq 'off') {
- eval {
- $vm->PowerOffVM();
- };
-
- if ($@) {
- # If error is SoapFault with InvalidPowerState, user maybe use some auto power off tool.
- # This is not error, warning is enought.
- if (ref($@) eq 'SoapFault') {
- if (ref($@->detail) eq 'InvalidPowerState') {
- show_error "Warning: Cannot power off vm (somebody done it before???) ".Opts::get_option('vmname').
- "!\nVMware error:".$@."\n";
- }
- } else {
- # Some other more serious problem
- show_error "Cannot power off vm ".Opts::get_option('vmname')."!\nVMware error:".$@."\n";
- my_exit 6;
- }
- }
- } else {
- show_error "Operation should be on, off or list!\n";
- my_exit 2;
- }
- $found++;
-}
-
-if ((!$found) && ($operation ne 'list')) {
- show_error "Cannot find vm ".Opts::get_option('vmname')."!\n";
- my_exit 5;
-}
-
-# Should be 0 -> success all, or 6 in case of error
-my_exit 0;
-
-__END__
-
-=head1 NAME
-
-fence_vmware_helper - Perform list of virtual machines and
- poweron, poweroff of operations on virtual machines.
-
-=head1 SYNOPSIS
-
- fence_vmware_helper --operation <on|off|list|status> [options]
-
-=head1 DESCRIPTION
-
-This VI Perl command-line utility provides an interface for
-seven common provisioning operations on one or more virtual
-machines: powering on, powering off and listing virtual mode.
-
-=head1 OPTIONS
-
-=head2 GENERAL OPTIONS
-
-=over
-
-=item B<operation>
-
-Operation to be performed. One of the following:
-
- <on> (power on one or more virtual machines),
- <off> (power off one or more virtual machines),
- <list> (list virtual machines and their status)
- <status> (same as list, but show only machines with vmname)
-
-=item B<vmname>
-
-Optional. Name of the virtual machine on which the
-operation is to be performed.
-
-=item B<datacenter>
-
-Optional. Name of the datacenter for the virtual machine(s).
-Operations will be performed on all the virtual machines under the given datacenter.
-
-=back
-
-=head1 EXAMPLES
-
-Power on a virtual machine
-
- fence_vmware_helper --username administrator --password administrator --operation on
- --vmname rhel --server win1
-
- fence_vmware_helper --username administrator --password administrator --operation on
- --vmname rhel --server win1 --datacenter Datacenter
-
-Power off a virtual machine
-
- fence_vmware_helper --username administrator --password administrator --operation off
- --vmname rhel --server win1
-
- perl fence_vmware_helper --username administrator --password administrator --operation off
- --vmname rhel --server win1 --datacenter Datacenter
-
-List of virtual machines
-
- fence_vmware_helper --username administrator --password administrator --server win1
-
- fence_vmware_helper --username administrator --password administrator --server win1
- --operation list
-
-Get status of virtual machine
-
- fence_vmware_helper --username administrator --password administrator --server win1
- --vmname rhel --operation status
-
-=head1 SUPPORTED PLATFORMS
-
-All operations supported on ESX 3.0.1
-
-All operations supported on Virtual Center 2.0.1
diff --git a/fence/agents/vmware_soap/Makefile.am b/fence/agents/vmware_soap/Makefile.am
deleted file mode 100644
index 15e6748..0000000
--- a/fence/agents/vmware_soap/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_vmware_soap
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/vmware_soap/Makefile.in b/fence/agents/vmware_soap/Makefile.in
deleted file mode 100644
index b5df56f..0000000
--- a/fence/agents/vmware_soap/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/vmware_soap
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_vmware_soap
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/vmware_soap/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/vmware_soap/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/vmware_soap/fence_vmware_soap.py b/fence/agents/vmware_soap/fence_vmware_soap.py
index e47f11e..df84ae5 100644
--- a/fence/agents/vmware_soap/fence_vmware_soap.py
+++ b/fence/agents/vmware_soap/fence_vmware_soap.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import shutil, tempfile, suds
@@ -40,8 +40,8 @@ class RequestsTransport(HttpAuthenticated):
def soap_login(options):
run_delay(options)
- if options.has_key("--ssl") or options.has_key("--ssl-secure") or options.has_key("--ssl-insecure"):
- if options.has_key("--ssl-insecure"):
+ if "--ssl" in options or "--ssl-secure" in options or "--ssl-insecure" in options:
+ if "--ssl-insecure" in options:
verify = False
else:
verify = True
@@ -67,7 +67,7 @@ def soap_login(options):
mo_SessionManager._type = 'SessionManager'
conn.service.Login(mo_SessionManager, options["--username"], options["--password"])
- except requests.exceptions.SSLError, ex:
+ except requests.exceptions.SSLError as ex:
fail_usage("Server side certificate verification failed")
except Exception:
fail(EC_LOGIN_DENIED)
@@ -83,7 +83,7 @@ def process_results(results, machines, uuid, mappingToUUID):
info[i.name] = i.val
# Prevent error KeyError: 'config.uuid' when reaching systems which P2V failed,
# since these systems don't have a valid UUID
- if info.has_key("config.uuid"):
+ if "config.uuid" in info:
machines[info["name"]] = (info["config.uuid"], info["summary.runtime.powerState"])
uuid[info["config.uuid"]] = info["summary.runtime.powerState"]
mappingToUUID[m.obj.value] = info["config.uuid"]
@@ -143,13 +143,13 @@ def get_power_status(conn, options):
uuid.update(more_uuid)
mappingToUUID.update(more_mappingToUUID)
# Do not run unnecessary SOAP requests
- if options.has_key("--uuid") and options["--uuid"] in uuid:
+ if "--uuid" in options and options["--uuid"] in uuid:
break
if ["list", "monitor"].count(options["--action"]) == 1:
return machines
else:
- if not options.has_key("--uuid"):
+ if "--uuid" not in options:
if options["--plug"].startswith('/'):
## Transform InventoryPath to UUID
mo_SearchIndex = Property(options["ServiceContent"].searchIndex.value)
@@ -194,7 +194,7 @@ def set_power_status(conn, options):
conn.service.PowerOnVM_Task(mo_machine)
else:
conn.service.PowerOffVM_Task(mo_machine)
- except suds.WebFault, ex:
+ except suds.WebFault as ex:
if (str(ex).find("Permission to perform this operation was denied")) >= 0:
fail(EC_INVALID_PRIVILEGES)
else:
diff --git a/fence/agents/wti/Makefile.am b/fence/agents/wti/Makefile.am
deleted file mode 100644
index 17b6f21..0000000
--- a/fence/agents/wti/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_wti
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/wti/Makefile.in b/fence/agents/wti/Makefile.in
deleted file mode 100644
index be147ff..0000000
--- a/fence/agents/wti/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/wti
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_wti
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/wti/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/wti/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/wti/fence_wti.py b/fence/agents/wti/fence_wti.py
index f4ab51b..a7b2f0d 100644
--- a/fence/agents/wti/fence_wti.py
+++ b/fence/agents/wti/fence_wti.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#####
##
@@ -149,7 +149,7 @@ def get_plug_group_status(conn, options):
if ["list", "monitor"].count(options["--action"]) == 1:
results = {}
- for group, status in outlets.items():
+ for group, status in list(outlets.items()):
results[group] = (group, status[0])
return results
@@ -163,8 +163,8 @@ def get_power_status(conn, options):
if ret == "PROBLEM":
ret = get_plug_group_status(conn, options)
else:
- ret = dict(get_plug_status(conn, options).items() + \
- get_plug_group_status(conn, options).items())
+ ret = dict(list(get_plug_status(conn, options).items()) + \
+ list(get_plug_group_status(conn, options).items()))
return ret
@@ -202,7 +202,7 @@ is running because the connection will block any necessary fencing actions."
##
## @note: if it possible that this device does not need either login, password or both of them
#####
- if not options.has_key("--ssh"):
+ if "--ssh" not in options:
try:
if options["--action"] in ["off", "reboot"]:
time.sleep(int(options["--delay"]))
@@ -218,14 +218,14 @@ is running because the connection will block any necessary fencing actions."
result = conn.log_expect([re_login, "Password: ", re_prompt], int(options["--shell-timeout"]))
if result == 0:
- if options.has_key("--username"):
+ if "--username" in options:
conn.send_eol(options["--username"])
result = conn.log_expect([re_login, "Password: ", re_prompt], int(options["--shell-timeout"]))
else:
fail_usage("Failed: You have to set login name")
if result == 1:
- if options.has_key("--password"):
+ if "--password" in options:
conn.send_eol(options["--password"])
conn.log_expect(options["--command-prompt"], int(options["--shell-timeout"]))
else:
diff --git a/fence/agents/xenapi/Makefile.am b/fence/agents/xenapi/Makefile.am
deleted file mode 100644
index 1f05023..0000000
--- a/fence/agents/xenapi/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_xenapi
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC)
-
-sbin_SCRIPTS = $(TARGET)
-
-man_MANS = $(TARGET).8
-
-FENCE_TEST_ARGS = -l test -p test -n 1 --session-url http://test
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
diff --git a/fence/agents/xenapi/Makefile.in b/fence/agents/xenapi/Makefile.in
deleted file mode 100644
index 9379314..0000000
--- a/fence/agents/xenapi/Makefile.in
+++ /dev/null
@@ -1,669 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = fence/agents/xenapi
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_xenapi
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC)
-sbin_SCRIPTS = $(TARGET)
-man_MANS = $(TARGET).8
-FENCE_TEST_ARGS = -l test -p test -n 1 --session-url http://test
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/xenapi/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/xenapi/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local cscopelist-am ctags-am distclean distclean-generic \
- distclean-libtool distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man8 install-pdf install-pdf-am install-ps \
- install-ps-am install-sbinSCRIPTS install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/xenapi/fence_xenapi.py b/fence/agents/xenapi/fence_xenapi.py
index 5fe7646..ccddf2d 100644
--- a/fence/agents/xenapi/fence_xenapi.py
+++ b/fence/agents/xenapi/fence_xenapi.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
#
#############################################################################
# Copyright 2011 Matthew Clark
@@ -47,7 +47,7 @@ BUILD_DATE=""
EC_BAD_SESSION = 1
# Find the status of the port given in the -U flag of options.
def get_power_fn(session, options):
- if options.has_key("--verbose"):
+ if "--verbose" in options:
verbose = True
else:
verbose = False
@@ -62,7 +62,7 @@ def get_power_fn(session, options):
if not record["is_a_template"] and not record["is_control_domain"]:
status = record["power_state"]
if verbose:
- print "UUID:", record["uuid"], "NAME:", record["name_label"], "POWER STATUS:", record["power_state"]
+ print("UUID:", record["uuid"], "NAME:", record["name_label"], "POWER STATUS:", record["power_state"])
# Note that the VM can be in the following states (from the XenAPI document)
# Halted: VM is offline and not using any resources.
# Paused: All resources have been allocated but the VM itself is paused and its vCPUs are not running
@@ -72,8 +72,8 @@ def get_power_fn(session, options):
# is checked before a fencing action. Only when the machine is Halted is it not consuming resources which
# may include whatever you are trying to protect with this fencing action.
return status == "Halted" and "off" or "on"
- except Exception, exn:
- print str(exn)
+ except Exception as exn:
+ print(str(exn))
return "Error"
@@ -96,13 +96,13 @@ def set_power_fn(session, options):
elif options["--action"] == "reboot":
# Force reboot the VM
session.xenapi.VM.hard_reboot(vm)
- except Exception, exn:
- print str(exn)
+ except Exception as exn:
+ print(str(exn))
# Function to populate an array of virtual machines and their status
def get_outlet_list(session, options):
result = {}
- if options.has_key("--verbose"):
+ if "--verbose" in options:
verbose = True
else:
verbose = False
@@ -121,9 +121,9 @@ def get_outlet_list(session, options):
status = record["power_state"]
result[uuid] = (name, status)
if verbose:
- print "UUID:", record["uuid"], "NAME:", name, "POWER STATUS:", record["power_state"]
- except Exception, exn:
- print str(exn)
+ print("UUID:", record["uuid"], "NAME:", name, "POWER STATUS:", record["power_state"])
+ except Exception as exn:
+ print(str(exn))
return result
@@ -138,8 +138,8 @@ def connect_and_login(options):
session = XenAPI.Session(url)
# Login using the supplied credentials.
session.xenapi.login_with_password(username, password)
- except Exception, exn:
- print str(exn)
+ except Exception as exn:
+ print(str(exn))
# http://sources.redhat.com/cluster/wiki/FenceAgentAPI says that for no connectivity
# the exit value should be 1. It doesn't say anything about failed logins, so
# until I hear otherwise it is best to keep this exit the same to make sure that
@@ -152,13 +152,13 @@ def connect_and_login(options):
# this is tried first as this is the only properly unique identifier.
# Exceptions are not handled in this function, code that calls this must be ready to handle them.
def return_vm_reference(session, options):
- if options.has_key("--verbose"):
+ if "--verbose" in options:
verbose = True
else:
verbose = False
# Case where the UUID has been specified
- if options.has_key("--uuid"):
+ if "--uuid" in options:
uuid = options["--uuid"].lower()
# When using the -n parameter for name, we get an error message (in verbose
# mode) that tells us that we didn't find a VM. To immitate that here we
@@ -167,11 +167,11 @@ def return_vm_reference(session, options):
return session.xenapi.VM.get_by_uuid(uuid)
except Exception:
if verbose:
- print "No VM's found with a UUID of \"%s\"" % uuid
+ print("No VM's found with a UUID of \"%s\"" % uuid)
raise
# Case where the vm_name/port has been specified
- if options.has_key("--plug"):
+ if "--plug" in options:
vm_name = options["--plug"]
vm_arr = session.xenapi.VM.get_by_name_label(vm_name)
# Need to make sure that we only have one result as the vm_name may
@@ -181,14 +181,14 @@ def return_vm_reference(session, options):
else:
if len(vm_arr) == 0:
if verbose:
- print "No VM's found with a name of \"%s\"" % vm_name
+ print("No VM's found with a name of \"%s\"" % vm_name)
# NAME_INVALID used as the XenAPI throws a UUID_INVALID if it can't find
# a VM with the specified UUID. This should make the output look fairly
# consistent.
raise Exception("NAME_INVALID")
else:
if verbose:
- print "Multiple VM's have the name \"%s\", use UUID instead" % vm_name
+ print("Multiple VM's have the name \"%s\", use UUID instead" % vm_name)
raise Exception("MULTIPLE_VMS_FOUND")
# We should never get to this case as the input processing checks that either the UUID or
diff --git a/fence/agents/zvm/Makefile.am b/fence/agents/zvm/Makefile.am
deleted file mode 100644
index 2e0f12d..0000000
--- a/fence/agents/zvm/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-TARGET = fence_zvmip
-
-SRC = $(TARGET).py
-
-EXTRA_DIST = $(SRC) fence_zvm_man_page
-
-sbin_SCRIPTS = $(TARGET)
-
-sbin_PROGRAMS = fence_zvm
-fence_zvm_SOURCES = fence_zvm.c
-fence_zvm_CFLAGS = -D_GNU_SOURCE
-
-man_MANS = $(TARGET).8 fence_zvm.8
-
-fence_zvm.8: fence_zvm_man_page
- cp $(top_srcdir)/fence/agents/zvm/fence_zvm_man_page fence_zvm.8
-
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-
-include $(top_srcdir)/make/fencebuild.mk
-include $(top_srcdir)/make/fenceman.mk
-include $(top_srcdir)/make/agentpycheck.mk
-
-# we do not test fence_zvm because it can be compiled only on specific architecture
-check: xml-check.fence_zvmip delay-check.fence_zvmip
diff --git a/fence/agents/zvm/Makefile.in b/fence/agents/zvm/Makefile.in
deleted file mode 100644
index e096878..0000000
--- a/fence/agents/zvm/Makefile.in
+++ /dev/null
@@ -1,882 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = fence_zvm$(EXEEXT)
-subdir = fence/agents/zvm
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/make/ac_python_module.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/make/clusterautoconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" \
- "$(DESTDIR)$(man8dir)"
-PROGRAMS = $(sbin_PROGRAMS)
-am_fence_zvm_OBJECTS = fence_zvm-fence_zvm.$(OBJEXT)
-fence_zvm_OBJECTS = $(am_fence_zvm_OBJECTS)
-fence_zvm_LDADD = $(LDADD)
-AM_V_lt = $(am__v_lt_ at AM_V@)
-am__v_lt_ = $(am__v_lt_ at AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 =
-fence_zvm_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(fence_zvm_CFLAGS) \
- $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-SCRIPTS = $(sbin_SCRIPTS)
-AM_V_P = $(am__v_P_ at AM_V@)
-am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_ at AM_V@)
-am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_ at AM_V@)
-am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-DEFAULT_INCLUDES = -I. at am__isrc@ -I$(top_builddir)/make
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_ at AM_V@)
-am__v_CC_ = $(am__v_CC_ at AM_DEFAULT_V@)
-am__v_CC_0 = @echo " CC " $@;
-am__v_CC_1 =
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_ at AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_ at AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo " CCLD " $@;
-am__v_CCLD_1 =
-SOURCES = $(fence_zvm_SOURCES)
-DIST_SOURCES = $(fence_zvm_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \
- $(top_srcdir)/make/agentpycheck.mk \
- $(top_srcdir)/make/fencebuild.mk \
- $(top_srcdir)/make/fenceman.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AGENTS_LIST = @AGENTS_LIST@
-AMTAR = @AMTAR@
-AMTTOOL_PATH = @AMTTOOL_PATH@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLUSTERDATA = @CLUSTERDATA@
-CLUSTERVARRUN = @CLUSTERVARRUN@
-COROSYNC_CMAPCTL_PATH = @COROSYNC_CMAPCTL_PATH@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CONFIG_DIR = @DEFAULT_CONFIG_DIR@
-DEFAULT_CONFIG_FILE = @DEFAULT_CONFIG_FILE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FENCEAGENTSLIBDIR = @FENCEAGENTSLIBDIR@
-FGREP = @FGREP@
-GNUTLSCLI_PATH = @GNUTLSCLI_PATH@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMITOOL_PATH = @IPMITOOL_PATH@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LOGDIR = @LOGDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPATH_PATH = @MPATH_PATH@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NOVA_PATH = @NOVA_PATH@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SBD_PATH = @SBD_PATH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SG_PERSIST_PATH = @SG_PERSIST_PATH@
-SG_TURS_PATH = @SG_TURS_PATH@
-SHELL = @SHELL@
-SNMPBIN = @SNMPBIN@
-SNMPGET_PATH = @SNMPGET_PATH@
-SNMPSET_PATH = @SNMPSET_PATH@
-SNMPWALK_PATH = @SNMPWALK_PATH@
-SSH_PATH = @SSH_PATH@
-STRIP = @STRIP@
-SUDO_PATH = @SUDO_PATH@
-TELNET_PATH = @TELNET_PATH@
-VERSION = @VERSION@
-VGS_PATH = @VGS_PATH@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-TARGET = fence_zvmip
-SRC = $(TARGET).py
-EXTRA_DIST = $(SRC) fence_zvm_man_page
-sbin_SCRIPTS = $(TARGET)
-fence_zvm_SOURCES = fence_zvm.c
-fence_zvm_CFLAGS = -D_GNU_SOURCE
-man_MANS = $(TARGET).8 fence_zvm.8
-FENCE_TEST_ARGS = -l test -p test -a test -n 1
-DATADIR := $(abs_top_srcdir)/tests/data/metadata
-AWK_VAL = 'BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu fence/agents/zvm/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu fence/agents/zvm/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/make/fencebuild.mk $(top_srcdir)/make/fenceman.mk $(top_srcdir)/make/agentpycheck.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p \
- || test -f $$p1 \
- ; then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' \
- -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' \
- `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(sbindir)" && rm -f $$files
-
-clean-sbinPROGRAMS:
- @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
- echo " rm -f" $$list; \
- rm -f $$list || exit $$?; \
- test -n "$(EXEEXT)" || exit 0; \
- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f" $$list; \
- rm -f $$list
-
-fence_zvm$(EXEEXT): $(fence_zvm_OBJECTS) $(fence_zvm_DEPENDENCIES) $(EXTRA_fence_zvm_DEPENDENCIES)
- @rm -f fence_zvm$(EXEEXT)
- $(AM_V_CCLD)$(fence_zvm_LINK) $(fence_zvm_OBJECTS) $(fence_zvm_LDADD) $(LIBS)
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
- at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fence_zvm-fence_zvm.Po at am__quote@
-
-.c.o:
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-fence_zvm-fence_zvm.o: fence_zvm.c
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_zvm_CFLAGS) $(CFLAGS) -MT fence_zvm-fence_zvm.o -MD -MP -MF $(DEPDIR)/fence_zvm-fence_zvm.Tpo -c -o fence_zvm-fence_zvm.o `test -f 'fence_zvm.c' || echo '$(srcdir)/'`fence_zvm.c
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fence_zvm-fence_zvm.Tpo $(DEPDIR)/fence_zvm-fence_zvm.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fence_zvm.c' object='fence_zvm-fence_zvm.o' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_zvm_CFLAGS) $(CFLAGS) -c -o fence_zvm-fence_zvm.o `test -f 'fence_zvm.c' || echo '$(srcdir)/'`fence_zvm.c
-
-fence_zvm-fence_zvm.obj: fence_zvm.c
- at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_zvm_CFLAGS) $(CFLAGS) -MT fence_zvm-fence_zvm.obj -MD -MP -MF $(DEPDIR)/fence_zvm-fence_zvm.Tpo -c -o fence_zvm-fence_zvm.obj `if test -f 'fence_zvm.c'; then $(CYGPATH_W) 'fence_zvm.c'; else $(CYGPATH_W) '$(srcdir)/fence_zvm.c'; fi`
- at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fence_zvm-fence_zvm.Tpo $(DEPDIR)/fence_zvm-fence_zvm.Po
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fence_zvm.c' object='fence_zvm-fence_zvm.obj' libtool=no @AMDEPBACKSLASH@
- at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fence_zvm_CFLAGS) $(CFLAGS) -c -o fence_zvm-fence_zvm.obj `if test -f 'fence_zvm.c'; then $(CYGPATH_W) 'fence_zvm.c'; else $(CYGPATH_W) '$(srcdir)/fence_zvm.c'; fi`
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean-am: clean-generic clean-libtool clean-local clean-sbinPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinPROGRAMS install-sbinSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS \
- uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-local clean-sbinPROGRAMS cscopelist-am \
- ctags ctags-am distclean distclean-compile distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man8 install-pdf \
- install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
- install-sbinSCRIPTS install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
- uninstall-am uninstall-man uninstall-man8 \
- uninstall-sbinPROGRAMS uninstall-sbinSCRIPTS
-
-.PRECIOUS: Makefile
-
-
-fence_zvm.8: fence_zvm_man_page
- cp $(top_srcdir)/fence/agents/zvm/fence_zvm_man_page fence_zvm.8
-$(TARGET): $(SRC)
- bash $(top_srcdir)/scripts/fenceparse \
- $(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
- $(VERSION) \
- $(abs_srcdir) $@ | \
- sed \
- -e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
- -e 's#@''LOGDIR@#${LOGDIR}#g' \
- -e 's#@''SBINDIR@#${sbindir}#g' \
- -e 's#@''LIBEXECDIR@#${libexecdir}#g' \
- -e 's#@''IPMITOOL_PATH@#${IPMITOOL_PATH}#g' \
- -e 's#@''AMTTOOL_PATH@#${AMTTOOL_PATH}#g' \
- -e 's#@''GNUTLSCLI_PATH@#${GNUTLSCLI_PATH}#g' \
- -e 's#@''COROSYNC_CMAPCTL_PATH@#${COROSYNC_CMAPCTL_PATH}#g' \
- -e 's#@''SG_PERSIST_PATH@#${SG_PERSIST_PATH}#g' \
- -e 's#@''SG_TURS_PATH@#${SG_TURS_PATH}#g' \
- -e 's#@''VGS_PATH@#${VGS_PATH}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SSH_PATH@#${SSH_PATH}#g' \
- -e 's#@''TELNET_PATH@#${TELNET_PATH}#g' \
- -e 's#@''MPATH_PATH@#${MPATH_PATH}#g' \
- -e 's#@''SBD_PATH@#${SBD_PATH}#g' \
- -e 's#@''STORE_PATH@#${CLUSTERVARRUN}#g' \
- -e 's#@''SUDO_PATH@#${SUDO_PATH}#g' \
- -e 's#@''SNMPWALK_PATH@#${SNMPWALK_PATH}#g' \
- -e 's#@''SNMPSET_PATH@#${SNMPSET_PATH}#g' \
- -e 's#@''SNMPGET_PATH@#${SNMPGET_PATH}#g' \
- -e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
- > $@
-
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
- else true ; fi
-
-clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
-
-clean-local: clean
-%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
- set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
-
-clean-man:
- rm -f *.8 .*.8.tmp *.wiki
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
-
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
-
-# we do not test fence_zvm because it can be compiled only on specific architecture
-check: xml-check.fence_zvmip delay-check.fence_zvmip
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fence/agents/zvm/fence_zvm.c b/fence/agents/zvm/fence_zvm.c
index 2f82e25..dcd00c8 100644
--- a/fence/agents/zvm/fence_zvm.c
+++ b/fence/agents/zvm/fence_zvm.c
@@ -843,7 +843,7 @@ get_options(int argc, char **argv, zvm_driver_t *zvm)
static int
usage()
{
- fprintf(stderr,"Usage: fence_zvm [options]\n\n"
+ printf("Usage: fence_zvm [options]\n\n"
"\tWhere [options] =\n"
"\t-o --action [action] - \"off\", \"on\", \"list\", \"metadata\", "
"\"monitor\", \"reboot\", \"status\"\n"
@@ -853,7 +853,7 @@ usage()
"\t-T --timeout [secs] - Time to wait for fence in seconds - currently ignored\n"
"\t--zvmsys [node] - z/VM Node on which SMAPI server lives\n"
"\t-h --help - Display this usage information\n");
- return(1);
+ return(0);
}
/**
diff --git a/fence/agents/zvm/fence_zvm_man_page b/fence/agents/zvm/fence_zvm_man_page
deleted file mode 100644
index 359436e..0000000
--- a/fence/agents/zvm/fence_zvm_man_page
+++ /dev/null
@@ -1,87 +0,0 @@
-.TH fence_zvm 8
-
-.SH NAME
-fence_zvm - Power Fencing agent for GFS on System z z/VM Clusters
-
-.SH SYNOPSIS
-.B
-fence_zvm
-[\fIOPTION\fR]...
-
-.SH DESCRIPTION
-fence_zvm is a Power Fencing agent used on a GFS virtual machine in a System z z/VM cluster.
-It uses the SMAPI interface to recycle an active image.
-
-fence_zvm accepts options on the command line as well as from stdin.
-fence_node sends the options through stdin when it execs the agent.
-fence_zvm can be run by itself with command line options which is useful
-for testing.
-
-Vendor URL: http://www.sinenomine.net
-
-.SH OPTIONS
-.TP
-\fB-o --action\fP
-Fencing action: "off" - deactivate virtual machine; "on" - activate virtual machine; "metadata" - display device metadata" - describe fence agent parameters; "status" - state of virtual machine
-.TP
-\fB--delay\fP \fIseconds\fP
-Time to delay fencing action in seconds
-.TP
-\fB-n --plug\fP \fItarget\fP
-Name of virtual machine to recycle.
-.TP
-\fB-h --help\fP
-Print out a help message describing available options, then exit.
-.TP
-\fB-a --ip\fP \fIsmapi Server\fP
-\fBName\fP of SMAPI server virtual machine. To be consistent with other fence agents this name is a little misleading: it is the name of the virtual machine not its IP address or hostname.
-.TP
-\fB--zvmsys\fP \fIz/VM System\fP
-\fBName\fP of z/VM on which the SMAPI server virtual machine resides. Optional - defaults to system on which the node is running.
-.TP
-\fB-h --help\fP
-Display usage information
-.TP
-\fI-t --timeout = < shutdown timeout >\fP
-Amount of \fIgrace\fP time to give the virtual machine to shutdown cleanly before being
-forcibly terminated. Currently, this option is ignored.
-
-.SH STDIN PARAMETERS
-.TP
-\fIagent = < param >\fP
-This option is used by fence_node(8) and is ignored by fence_zvm.
-.TP
-\fIaction = < action >\fP
-Fencing action: "off" - fence off device; "metadata" - display device metadata; "status" - state of device
-.TP
-\fIport = < target >\fP
-Name of virtual machine to recycle.
-.TP
-\fIipaddr= < server name >\fP
-\fBName\fP of SMAPI server virtual machine. To be consistent with other fence agents thisname is a little misleading: it is the name of the virtual machine not its IP address or hostname.
-.TP
-\fItimeout = < shutdown timeout >\fP
-Amount of \fIgrace\fP time to give the virtual machine to shutdown cleanly before being
-forcibly terminated. Currently, this option is ignored.
-
-.SH SEE ALSO
-fence(8), fenced(8), fence_node(8)
-
-.SH NOTES
-To use this agent the z/VM SMAPI service needs to be configured to allow the virtual
-machine running this agent to connect to it and issue the image_recycle operation.
-This involves updating the VSMWORK1 AUTHLIST VMSYS:VSMWORK1. file. The entry should look
-something similar to this:
-
-.nf
-Column 1 Column 66 Column 131
-| | |
-V V V
-XXXXXXXX ALL IMAGE_OPERATIONS
-.fi
-
-Where XXXXXXX is the name of the virtual machine where the agent resides.
-
-In addition, the VM directory entry that defines this virtual machine requires the
-IUCV ANY statement (or IUCV <userid of SMAPI Server>). This authorizes use of IUCV
-to connect to the SMAPI server.
diff --git a/fence/agents/zvm/fence_zvmip.py b/fence/agents/zvm/fence_zvmip.py
index 08c7ae7..f4214fc 100644
--- a/fence/agents/zvm/fence_zvmip.py
+++ b/fence/agents/zvm/fence_zvmip.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python -tt
+#!@PYTHON@ -tt
import sys
import atexit
diff --git a/make/ac_python_module.m4 b/make/ac_python_module.m4
index 32b9d72..d1c81f6 100644
--- a/make/ac_python_module.m4
+++ b/make/ac_python_module.m4
@@ -12,7 +12,7 @@ dnl @license AllPermissive
AC_DEFUN([AC_PYTHON_MODULE],[
AC_MSG_CHECKING(python module: $1)
- python -c "import $1" 2>/dev/null
+ $PYTHON -c "import $1" 2>/dev/null
if test $? -eq 0;
then
AC_MSG_RESULT(yes)
diff --git a/make/agentccheck.mk b/make/agentccheck.mk
deleted file mode 100644
index 9f7a8b4..0000000
--- a/make/agentccheck.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-DATADIR:=$(abs_top_srcdir)/tests/data/metadata
-
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%)
-
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- ./$(INPUT) -o metadata > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
-
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- ./$(INPUT) -o metadata > $(DATADIR)/$(INPUT).xml
-
-# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `/usr/bin/time -f "%e" ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || \
- /usr/bin/time -f "%e" ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --
-
diff --git a/make/agentpycheck.mk b/make/agentpycheck.mk
index 45dcefb..181fd17 100644
--- a/make/agentpycheck.mk
+++ b/make/agentpycheck.mk
@@ -1,30 +1,41 @@
DATADIR:=$(abs_top_srcdir)/tests/data/metadata
AWK_VAL='BEGIN {store=-1} /name=\"store_path\"/ {store=2} {if (store!=0) {print}; store--}'
-check: $(TARGET:%=xml-check.%) $(SYMTARGET:%=xml-check.%) $(TARGET:%=delay-check.%) $(TARGET:%=rng-check.%)
+TEST_TARGET=$(filter-out $(TEST_TARGET_SKIP),$(TARGET))
-xml-check.%: %
- $(eval INPUT=$(subst xml-check.,,$@))
- $(eval TEMPFILE = $(shell mktemp))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(TEMPFILE)
- diff $(TEMPFILE) $(DATADIR)/$(INPUT).xml
- rm $(TEMPFILE)
+check: $(TEST_TARGET:%=%.xml-check) $(SYMTARGET:%=%.xml-check) $(TEST_TARGET:%=%.delay-check) $(TEST_TARGET:%=%.rng-check)
-xml-upload.%: %
- $(eval INPUT=$(subst xml-upload.,,$@))
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$(INPUT).xml
+%.xml-check: %
+ $(eval INPUT=$(subst .xml-check,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ TEMPFILE=$$(mktemp); \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$$x -o metadata | $(AWK) $(AWK_VAL) > $$TEMPFILE && \
+ diff $$TEMPFILE $(DATADIR)/$$x.xml && \
+ rm $$TEMPFILE; \
+ done
+
+%.xml-upload: %
+ $(eval INPUT=$(subst .xml-upload,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$$x -o metadata | $(AWK) $(AWK_VAL) > $(DATADIR)/$$x.xml; \
+ done
# If test will fail, rerun fence agents to show problems
-delay-check.%: %
- $(eval INPUT=$(subst delay-check.,,$@))
- test `PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 10 $(FENCE_TEST_ARGS) -- 2>&1 |\
- sed 's/\.//' | tail -n 1` -ge 1000 || ( \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib /usr/bin/time -f "%e" \
- python ./$(INPUT) --delay 0 $(FENCE_TEST_ARGS) --; false )
+%.delay-check: %
+ $(eval INPUT=$(subst .delay-check,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ test `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e 'delay=10\n $(FENCE_TEST_ARGS)' | $(PYTHON) $(@D)/$$x" 2>&1 |\
+ sed 's/\.//' | tail -n 1` -ge 1000 || ( \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib /usr/bin/time -f "%e" \
+ sh -c "/bin/echo -e 'delay=0\n $(FENCE_TEST_ARGS)' | $(PYTHON) $(@D)/$$x"; false ); \
+ done
-rng-check.%: %
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib python ./$(INPUT) -o metadata | \
- /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
- sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
- xmllint --nsclean --noout -
+%.rng-check: %
+ $(eval INPUT=$(subst .rng-check,,$(@F)))
+ for x in $(INPUT) `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$(INPUT) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@D)/$$x -o metadata | \
+ /usr/bin/xsltproc ${abs_top_srcdir}/fence/agents/lib/fence2rng.xsl - | \
+ sed -e 's/ rha:description=/ description=/g' -e 's/ rha:name=/ name=/g' | \
+ xmllint --nsclean --noout -; \
+ done
diff --git a/make/fencebuild.mk b/make/fencebuild.mk
index 2e9330c..1d50398 100644
--- a/make/fencebuild.mk
+++ b/make/fencebuild.mk
@@ -1,9 +1,11 @@
$(TARGET): $(SRC)
+ mkdir -p `dirname $@`
bash $(top_srcdir)/scripts/fenceparse \
$(top_srcdir)/make/copyright.cf REDHAT_COPYRIGHT \
$(VERSION) \
$(abs_srcdir) $@ | \
sed \
+ -e 's#@''PYTHON@#${PYTHON}#g' \
-e 's#@''FENCEAGENTSLIBDIR@#${FENCEAGENTSLIBDIR}#g' \
-e 's#@''LOGDIR@#${LOGDIR}#g' \
-e 's#@''SBINDIR@#${sbindir}#g' \
@@ -28,11 +30,20 @@ $(TARGET): $(SRC)
-e 's#@''NOVA_PATH@#${NOVA_PATH}#g' \
> $@
- if [ 0 -eq `echo "$(SRC)" | grep fence_ &> /dev/null; echo $$?` ]; then \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
+ if [ 0 -eq `echo "$(@)" | grep fence_ &> /dev/null; echo $$?` ]; then \
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(top_srcdir)/fence/agents/lib/check_used_options.py $@; \
else true ; fi
+ for x in `PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/lib $(PYTHON) $(@) -o metadata | grep symlink | sed -e "s/.*\(fence.*\)\" .*/\1/g"`; do \
+ cp $(@) $(@D)/$$x; \
+ $(MAKE) $(@D)/$$x.8; \
+ done
+
clean: clean-man
- rm -f $(TARGET) $(SYMTARGET) *.pyc *.wiki
+ rm -f $(CLEAN_TARGET:%.8=%) $(CLEAN_TARGET_ADDITIONAL) $(scsidata_SCRIPTS) */*.pyc */*.wiki
+
+ if [ "$(abs_builddir)" = "$(abs_top_builddir)/fence/agents/lib" ]; then \
+ rm -f $(TARGET); \
+ fi
-clean-local: clean
\ No newline at end of file
+clean-local: clean
diff --git a/make/fenceman.mk b/make/fenceman.mk
index c3360b7..1496eb4 100644
--- a/make/fenceman.mk
+++ b/make/fenceman.mk
@@ -1,10 +1,11 @@
%.8: $(TARGET) $(top_srcdir)/fence/agents/lib/fence2man.xsl
set -e && \
- PYTHONPATH=$(abs_srcdir)/../lib:$(abs_builddir)/../lib \
- python $(@:%.8=%) -o metadata > .$@.tmp && \
- xmllint --noout --relaxng $(abs_srcdir)/../lib/metadata.rng .$@.tmp && \
- xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl .$@.tmp > $@
- xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl .$@.tmp | grep -v '<?xml' > $(@:%.8=%.wiki)
+ PYTHONPATH=$(abs_srcdir)/lib:$(abs_builddir)/../lib:$(abs_builddir)/lib \
+ $(PYTHON) $(@:%.8=%) -o metadata > $(@D)/.$(@F).tmp && \
+ xmllint --noout --relaxng $(abs_srcdir)/lib/metadata.rng $(@D)/.$(@F).tmp && \
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2man.xsl $(@D)/.$(@F).tmp > $@
+ xsltproc $(top_srcdir)/fence/agents/lib/fence2wiki.xsl $(@D)/.$(@F).tmp | grep -v '<?xml' > $(@D)/$(@F:%.8=%.wiki)
clean-man:
- rm -f *.8 .*.8.tmp *.wiki
+ $(eval CLEAN_TARGET=$(shell find -name "*.8" | grep -Pv "kdump/fence_kdump_send.8|manual/fence_ack_manual.8"))
+ rm -f $(CLEAN_TARGET) */.*.8.tmp */*.wiki
diff --git a/tests/data/metadata/fence_imm.xml b/tests/data/metadata/fence_amt_ws.xml
similarity index 64%
copy from tests/data/metadata/fence_imm.xml
copy to tests/data/metadata/fence_amt_ws.xml
index d9bbe75..16b2035 100644
--- a/tests/data/metadata/fence_imm.xml
+++ b/tests/data/metadata/fence_amt_ws.xml
@@ -1,30 +1,23 @@
<?xml version="1.0" ?>
-<resource-agent name="fence_imm" shortdesc="Fence agent for IPMI" >
-<symlink name="fence_ilo3" shortdesc="Fence agent for HP iLO3"/>
-<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
-<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
-<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
-<vendor-url></vendor-url>
+<resource-agent name="fence_amt_ws" shortdesc="Fence agent for AMT (WS)" >
+<longdesc>fence_amt_ws is an I/O Fencing agent which can be used with Intel AMT (WS). This agent requires the pywsman Python library which is included in OpenWSMAN. (http://openwsman.github.io/).</longdesc>
+<vendor-url>http://www.intel.com/</vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
<getopt mixed="-o, --action=[action]" />
<content type="string" default="reboot" />
<shortdesc lang="en">Fencing action</shortdesc>
</parameter>
- <parameter name="auth" unique="0" required="0">
- <getopt mixed="-A, --auth=[auth]" />
+ <parameter name="boot_option" unique="0" required="0">
+ <getopt mixed="-b, --boot-option=[option]" />
<content type="select" >
- <option value="md5" />
- <option value="password" />
- <option value="none" />
+ <option value="pxe" />
+ <option value="hd" />
+ <option value="hdsafe" />
+ <option value="cd" />
+ <option value="diag" />
</content>
- <shortdesc lang="en">IPMI Lan Auth type.</shortdesc>
- </parameter>
- <parameter name="cipher" unique="0" required="0">
- <getopt mixed="-C, --cipher=[cipher]" />
- <content type="string" />
- <shortdesc lang="en">Ciphersuite to use (same as ipmitool -C parameter)</shortdesc>
+ <shortdesc lang="en">Change the default boot behavior of the machine.</shortdesc>
</parameter>
<parameter name="inet4_only" unique="0" required="0">
<getopt mixed="-4, --inet4-only" />
@@ -43,19 +36,9 @@
</parameter>
<parameter name="ipport" unique="0" required="0">
<getopt mixed="-u, --ipport=[port]" />
- <content type="string" default="623" />
+ <content type="string" default="16992" />
<shortdesc lang="en">TCP/UDP port to use for connection with device</shortdesc>
</parameter>
- <parameter name="lanplus" unique="0" required="0">
- <getopt mixed="-P, --lanplus" />
- <content type="boolean" default="0" />
- <shortdesc lang="en">Use Lanplus to improve security of connection</shortdesc>
- </parameter>
- <parameter name="login" unique="0" required="0">
- <getopt mixed="-l, --username=[name]" />
- <content type="string" />
- <shortdesc lang="en">Login name</shortdesc>
- </parameter>
<parameter name="method" unique="0" required="0">
<getopt mixed="-m, --method=[method]" />
<content type="select" default="onoff" >
@@ -79,16 +62,6 @@
<content type="string" />
<shortdesc lang="en">IP address or hostname of fencing device (together with --port-as-ip)</shortdesc>
</parameter>
- <parameter name="privlvl" unique="0" required="0">
- <getopt mixed="-L, --privlvl=[level]" />
- <content type="select" default="administrator" >
- <option value="callback" />
- <option value="user" />
- <option value="operator" />
- <option value="administrator" />
- </content>
- <shortdesc lang="en">Privilege level on IPMI device</shortdesc>
- </parameter>
<parameter name="verbose" unique="0" required="0">
<getopt mixed="-v, --verbose" />
<content type="boolean" />
@@ -114,11 +87,6 @@
<content type="string" default="0" />
<shortdesc lang="en">Wait X seconds before fencing is started</shortdesc>
</parameter>
- <parameter name="ipmitool_path" unique="0" required="0">
- <getopt mixed="--ipmitool-path=[path]" />
- <content type="string" default="/usr/bin/ipmitool" />
- <shortdesc lang="en">Path to ipmitool binary</shortdesc>
- </parameter>
<parameter name="login_timeout" unique="0" required="0">
<getopt mixed="--login-timeout=[seconds]" />
<content type="string" default="5" />
@@ -136,7 +104,7 @@
</parameter>
<parameter name="power_wait" unique="0" required="0">
<getopt mixed="--power-wait=[seconds]" />
- <content type="string" default="2" />
+ <content type="string" default="0" />
<shortdesc lang="en">Wait X seconds after issuing ON/OFF</shortdesc>
</parameter>
<parameter name="shell_timeout" unique="0" required="0">
@@ -149,16 +117,6 @@
<content type="string" default="1" />
<shortdesc lang="en">Count of attempts to retry power on</shortdesc>
</parameter>
- <parameter name="sudo" unique="0" required="0">
- <getopt mixed="--use-sudo" />
- <content type="boolean" />
- <shortdesc lang="en">Use sudo (without password) when calling 3rd party software</shortdesc>
- </parameter>
- <parameter name="sudo_path" unique="0" required="0">
- <getopt mixed="--sudo-path=[path]" />
- <content type="string" default="/usr/bin/sudo" />
- <shortdesc lang="en">Path to sudo binary</shortdesc>
- </parameter>
</parameters>
<actions>
<action name="on" automatic="0"/>
@@ -168,6 +126,5 @@
<action name="monitor" />
<action name="metadata" />
<action name="validate-all" />
- <action name="diag" />
</actions>
</resource-agent>
diff --git a/tests/data/metadata/fence_apc_snmp.xml b/tests/data/metadata/fence_apc_snmp.xml
index 8f2bb4d..608f271 100644
--- a/tests/data/metadata/fence_apc_snmp.xml
+++ b/tests/data/metadata/fence_apc_snmp.xml
@@ -1,5 +1,6 @@
<?xml version="1.0" ?>
<resource-agent name="fence_apc_snmp" shortdesc="Fence agent for APC, Tripplite PDU over SNMP" >
+<symlink name="fence_tripplite_snmp" shortdesc="Fence agent for Tripplife over SNMP"/>
<longdesc>fence_apc_snmp is an I/O Fencing agent which can be used with the APC network power switch or Tripplite PDU devices.It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1, v2c, v3 with all combinations of authenticity/privacy settings.</longdesc>
<vendor-url>http://www.apc.com</vendor-url>
<parameters>
diff --git a/tests/data/metadata/fence_cisco_ucs.xml b/tests/data/metadata/fence_cisco_ucs.xml
index 8db8a4f..a0d7697 100644
--- a/tests/data/metadata/fence_cisco_ucs.xml
+++ b/tests/data/metadata/fence_cisco_ucs.xml
@@ -108,6 +108,11 @@
<content type="string" default="5" />
<shortdesc lang="en">Wait X seconds for cmd prompt after login</shortdesc>
</parameter>
+ <parameter name="missing_as_off" unique="0" required="0">
+ <getopt mixed="--missing-as-off" />
+ <content type="boolean" />
+ <shortdesc lang="en">Missing port returns OFF instead of failure</shortdesc>
+ </parameter>
<parameter name="power_timeout" unique="0" required="0">
<getopt mixed="--power-timeout=[seconds]" />
<content type="string" default="20" />
diff --git a/tests/data/metadata/fence_compute.xml b/tests/data/metadata/fence_compute.xml
index 290a2eb..1864303 100644
--- a/tests/data/metadata/fence_compute.xml
+++ b/tests/data/metadata/fence_compute.xml
@@ -38,20 +38,30 @@
<content type="string" />
<shortdesc lang="en">Physical plug number on device, UUID or identification of machine</shortdesc>
</parameter>
+ <parameter name="region-name" unique="0" required="0">
+ <getopt mixed="--region-name=[region]" />
+ <content type="boolean" default="" />
+ <shortdesc lang="en">Region Name</shortdesc>
+ </parameter>
<parameter name="tenant-name" unique="0" required="0">
<getopt mixed="-t, --tenant-name=[tenant]" />
<content type="string" default="" />
<shortdesc lang="en">Keystone Admin Tenant</shortdesc>
</parameter>
+ <parameter name="insecure" unique="0" required="0">
+ <getopt mixed="--insecure" />
+ <content type="boolean" default="False" />
+ <shortdesc lang="en">Allow Insecure TLS Requests</shortdesc>
+ </parameter>
<parameter name="domain" unique="0" required="0">
<getopt mixed="-d, --domain=[string]" />
- <content type="string" default="" />
+ <content type="string" />
<shortdesc lang="en">DNS domain in which hosts live</shortdesc>
</parameter>
<parameter name="instance-filtering" unique="0" required="0">
<getopt mixed="--instance-filtering" />
- <content type="boolean" default="False" />
- <shortdesc lang="en">Only evacuate flagged instances</shortdesc>
+ <content type="boolean" default="True" />
+ <shortdesc lang="en">Allow instances to be evacuated</shortdesc>
</parameter>
<parameter name="no-shared-storage" unique="0" required="0">
<getopt mixed="--no-shared-storage" />
diff --git a/tests/data/metadata/fence_docker.xml b/tests/data/metadata/fence_docker.xml
index 8aeded6..6ef6019 100644
--- a/tests/data/metadata/fence_docker.xml
+++ b/tests/data/metadata/fence_docker.xml
@@ -56,6 +56,11 @@
<content type="boolean" />
<shortdesc lang="en">Use SSL connection with verifying certificate</shortdesc>
</parameter>
+ <parameter name="api_version" unique="0" required="0">
+ <getopt mixed="--api-version" />
+ <content type="string" default="1.11" />
+ <shortdesc lang="en">Version of Docker Remote API (default: 1.11)</shortdesc>
+ </parameter>
<parameter name="tlscacert" unique="0" required="0">
<getopt mixed="--tlscacert" />
<content type="string" />
@@ -131,11 +136,6 @@
<content type="string" default="/usr/bin/gnutls-cli" />
<shortdesc lang="en">Path to gnutls-cli binary</shortdesc>
</parameter>
- <parameter name="api_version" unique="0" required="0">
- <getopt mixed="--api-version" />
- <content type="string" default="1.11" />
- <shortdesc lang="en">Version of Docker Remote API (default: 1.11)</shortdesc>
- </parameter>
</parameters>
<actions>
<action name="on" automatic="0"/>
diff --git a/tests/data/metadata/fence_idrac.xml b/tests/data/metadata/fence_idrac.xml
index a6451e2..c8929b7 100644
--- a/tests/data/metadata/fence_idrac.xml
+++ b/tests/data/metadata/fence_idrac.xml
@@ -4,7 +4,7 @@
<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
+<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.</longdesc>
<vendor-url></vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
diff --git a/tests/data/metadata/fence_ilo3.xml b/tests/data/metadata/fence_ilo3.xml
index 5e8689a..cc8562c 100644
--- a/tests/data/metadata/fence_ilo3.xml
+++ b/tests/data/metadata/fence_ilo3.xml
@@ -4,7 +4,7 @@
<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
+<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.</longdesc>
<vendor-url></vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
diff --git a/tests/data/metadata/fence_ilo4.xml b/tests/data/metadata/fence_ilo4.xml
index 8a6660f..a5c7061 100644
--- a/tests/data/metadata/fence_ilo4.xml
+++ b/tests/data/metadata/fence_ilo4.xml
@@ -4,7 +4,7 @@
<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
+<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.</longdesc>
<vendor-url></vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
diff --git a/tests/data/metadata/fence_imm.xml b/tests/data/metadata/fence_imm.xml
index d9bbe75..5f29130 100644
--- a/tests/data/metadata/fence_imm.xml
+++ b/tests/data/metadata/fence_imm.xml
@@ -4,7 +4,7 @@
<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
+<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.</longdesc>
<vendor-url></vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
diff --git a/tests/data/metadata/fence_ipmilan.xml b/tests/data/metadata/fence_ipmilan.xml
index 30a25dc..e6a93e4 100644
--- a/tests/data/metadata/fence_ipmilan.xml
+++ b/tests/data/metadata/fence_ipmilan.xml
@@ -4,7 +4,7 @@
<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
+<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.</longdesc>
<vendor-url></vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
diff --git a/tests/data/metadata/fence_mpath.xml b/tests/data/metadata/fence_mpath.xml
index 7891ea9..c20b0bc 100644
--- a/tests/data/metadata/fence_mpath.xml
+++ b/tests/data/metadata/fence_mpath.xml
@@ -12,7 +12,7 @@ The fence_mpath agent works by having an unique key for each pair of node and de
<parameter name="devices" unique="0" required="1">
<getopt mixed="-d, --devices=[devices]" />
<content type="string" />
- <shortdesc lang="en">List of devices to use for current operation. Devices can be comma-separated list of device-mapper multipath devices (eg. /dev/dm-3). Each device must support SCSI-3 persistent reservations.</shortdesc>
+ <shortdesc lang="en">List of devices to use for current operation. Devices can be comma-separated list of device-mapper multipath devices (eg. /dev/mapper/3600508b400105df70000e00000ac0000 or /dev/mapper/mpath1). Each device must support SCSI-3 persistent reservations.</shortdesc>
</parameter>
<parameter name="key" unique="0" required="1">
<getopt mixed="-k, --key=[key]" />
diff --git a/tests/data/metadata/fence_scsi.xml b/tests/data/metadata/fence_scsi.xml
index 926b921..c635633 100644
--- a/tests/data/metadata/fence_scsi.xml
+++ b/tests/data/metadata/fence_scsi.xml
@@ -1,5 +1,5 @@
<?xml version="1.0" ?>
-<resource-agent name="fence_scsi" shortdesc="Fence agent for SCSI persistentl reservation" >
+<resource-agent name="fence_scsi" shortdesc="Fence agent for SCSI persistent reservation" >
<longdesc>fence_scsi is an I/O fencing agent that uses SCSI-3 persistent reservations to control access to shared storage devices. These devices must support SCSI-3 persistent reservations (SPC-3 or greater) as well as the "preempt-and-abort" subcommand.
The fence_scsi agent works by having each node in the cluster register a unique key with the SCSI devive(s). Once registered, a single node will become the reservation holder by creating a "write exclusive, registrants only" reservation on the device(s). The result is that only registered nodes may write to the device(s). When a node failure occurs, the fence_scsi agent will remove the key belonging to the failed node from the device(s). The failed node will no longer be able to write to [...]
<vendor-url></vendor-url>
@@ -17,7 +17,7 @@ The fence_scsi agent works by having each node in the cluster register a unique
<parameter name="devices" unique="0" required="0">
<getopt mixed="-d, --devices=[devices]" />
<content type="string" />
- <shortdesc lang="en">List of devices to use for current operation. Devices can be comma-separated list of raw device (eg. /dev/sdc) or device-mapper multipath devices (eg. /dev/dm-3). Each device must support SCSI-3 persistent reservations.</shortdesc>
+ <shortdesc lang="en">List of devices to use for current operation. Devices can be comma-separated list of raw devices (eg. /dev/sdc). Each device must support SCSI-3 persistent reservations.</shortdesc>
</parameter>
<parameter name="key" unique="0" required="0">
<getopt mixed="-k, --key=[key]" />
diff --git a/tests/data/metadata/fence_tripplite_snmp.xml b/tests/data/metadata/fence_tripplite_snmp.xml
index 64d332c..4ce4ec4 100644
--- a/tests/data/metadata/fence_tripplite_snmp.xml
+++ b/tests/data/metadata/fence_tripplite_snmp.xml
@@ -1,5 +1,6 @@
<?xml version="1.0" ?>
<resource-agent name="fence_tripplite_snmp" shortdesc="Fence agent for APC, Tripplite PDU over SNMP" >
+<symlink name="fence_tripplite_snmp" shortdesc="Fence agent for Tripplife over SNMP"/>
<longdesc>fence_apc_snmp is an I/O Fencing agent which can be used with the APC network power switch or Tripplite PDU devices.It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1, v2c, v3 with all combinations of authenticity/privacy settings.</longdesc>
<vendor-url>http://www.apc.com</vendor-url>
<parameters>
diff --git a/tests/data/metadata/fence_ilo3.xml b/tests/data/metadata/fence_vmware.xml
similarity index 63%
copy from tests/data/metadata/fence_ilo3.xml
copy to tests/data/metadata/fence_vmware.xml
index 5e8689a..fbe0323 100644
--- a/tests/data/metadata/fence_ilo3.xml
+++ b/tests/data/metadata/fence_vmware.xml
@@ -1,30 +1,30 @@
<?xml version="1.0" ?>
-<resource-agent name="fence_ilo3" shortdesc="Fence agent for IPMI" >
-<symlink name="fence_ilo3" shortdesc="Fence agent for HP iLO3"/>
-<symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
-<symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
-<symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
-<longdesc>fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).</longdesc>
-<vendor-url></vendor-url>
+<resource-agent name="fence_vmware" shortdesc="Fence agent for VMWare" >
+<longdesc>fence_vmware is an I/O Fencing agent which can be used with the VMware ESX, VMware ESXi or VMware Server to fence virtual machines.
+.P
+Before you can use this agent, it must be installed VI Perl Toolkit or vmrun command on every node you want to make fencing.
+.P
+VI Perl Toolkit is preferred for VMware ESX/ESXi and Virtual Center. Vmrun command is only solution for VMware Server 1/2 (this command will works against ESX/ESXi 3.5 up2 and VC up2 too, but not cluster aware!) and is available as part of VMware VIX API SDK package. VI Perl and VIX API SDK are both available from VMware web pages (not int RHEL repository!).
+.P
+You can specify type of VMware you are connecting to with \fB-d\fP switch (or \fIvmware_type\fR for stdin). Possible values are esx, server2 and server1.Default value is esx, which will use VI Perl. With server1 and server2, vmrun command is used.
+.P
+After you have successfully installed VI Perl Toolkit or VIX API, you should be able to run fence_vmware_helper (part of this agent) or vmrun command. This agent supports only vmrun from version 2.0.0 (VIX API 1.6.0).</longdesc>
+<vendor-url>http://www.vmware.com</vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
<getopt mixed="-o, --action=[action]" />
<content type="string" default="reboot" />
<shortdesc lang="en">Fencing action</shortdesc>
</parameter>
- <parameter name="auth" unique="0" required="0">
- <getopt mixed="-A, --auth=[auth]" />
- <content type="select" >
- <option value="md5" />
- <option value="password" />
- <option value="none" />
- </content>
- <shortdesc lang="en">IPMI Lan Auth type.</shortdesc>
- </parameter>
- <parameter name="cipher" unique="0" required="0">
- <getopt mixed="-C, --cipher=[cipher]" />
+ <parameter name="exec" unique="0" required="0">
+ <getopt mixed="-e, --exec=[command]" />
<content type="string" />
- <shortdesc lang="en">Ciphersuite to use (same as ipmitool -C parameter)</shortdesc>
+ <shortdesc lang="en">Command to execute</shortdesc>
+ </parameter>
+ <parameter name="identity_file" unique="0" required="0">
+ <getopt mixed="-k, --identity-file=[filename]" />
+ <content type="string" />
+ <shortdesc lang="en">Identity file (private key) for SSH</shortdesc>
</parameter>
<parameter name="inet4_only" unique="0" required="0">
<getopt mixed="-4, --inet4-only" />
@@ -43,27 +43,14 @@
</parameter>
<parameter name="ipport" unique="0" required="0">
<getopt mixed="-u, --ipport=[port]" />
- <content type="string" default="623" />
+ <content type="string" default="22" />
<shortdesc lang="en">TCP/UDP port to use for connection with device</shortdesc>
</parameter>
- <parameter name="lanplus" unique="0" required="0">
- <getopt mixed="-P, --lanplus" />
- <content type="boolean" default="1" />
- <shortdesc lang="en">Use Lanplus to improve security of connection</shortdesc>
- </parameter>
- <parameter name="login" unique="0" required="0">
+ <parameter name="login" unique="0" required="1">
<getopt mixed="-l, --username=[name]" />
<content type="string" />
<shortdesc lang="en">Login name</shortdesc>
</parameter>
- <parameter name="method" unique="0" required="0">
- <getopt mixed="-m, --method=[method]" />
- <content type="select" default="cycle" >
- <option value="onoff" />
- <option value="cycle" />
- </content>
- <shortdesc lang="en">Method to fence</shortdesc>
- </parameter>
<parameter name="passwd" unique="0" required="0">
<getopt mixed="-p, --password=[password]" />
<content type="string" />
@@ -79,15 +66,25 @@
<content type="string" />
<shortdesc lang="en">IP address or hostname of fencing device (together with --port-as-ip)</shortdesc>
</parameter>
- <parameter name="privlvl" unique="0" required="0">
- <getopt mixed="-L, --privlvl=[level]" />
- <content type="select" default="administrator" >
- <option value="callback" />
- <option value="user" />
- <option value="operator" />
- <option value="administrator" />
- </content>
- <shortdesc lang="en">Privilege level on IPMI device</shortdesc>
+ <parameter name="secure" unique="0" required="0">
+ <getopt mixed="-x, --ssh" />
+ <content type="boolean" default="1" />
+ <shortdesc lang="en">Use SSH connection</shortdesc>
+ </parameter>
+ <parameter name="ssh_options" unique="0" required="0">
+ <getopt mixed="--ssh-options=[options]" />
+ <content type="string" />
+ <shortdesc lang="en">SSH options to use</shortdesc>
+ </parameter>
+ <parameter name="vmware_type" unique="0" required="0">
+ <getopt mixed="-d, --vmware_type=[type]" />
+ <content type="string" default="esx" />
+ <shortdesc lang="en">Type of VMware to connect</shortdesc>
+ </parameter>
+ <parameter name="vmware_datacenter" unique="0" required="0">
+ <getopt mixed="-s, --vmware-datacenter=[dc]" />
+ <content type="string" />
+ <shortdesc lang="en">VMWare datacenter filter</shortdesc>
</parameter>
<parameter name="verbose" unique="0" required="0">
<getopt mixed="-v, --verbose" />
@@ -114,11 +111,6 @@
<content type="string" default="0" />
<shortdesc lang="en">Wait X seconds before fencing is started</shortdesc>
</parameter>
- <parameter name="ipmitool_path" unique="0" required="0">
- <getopt mixed="--ipmitool-path=[path]" />
- <content type="string" default="/usr/bin/ipmitool" />
- <shortdesc lang="en">Path to ipmitool binary</shortdesc>
- </parameter>
<parameter name="login_timeout" unique="0" required="0">
<getopt mixed="--login-timeout=[seconds]" />
<content type="string" default="5" />
@@ -136,7 +128,7 @@
</parameter>
<parameter name="power_wait" unique="0" required="0">
<getopt mixed="--power-wait=[seconds]" />
- <content type="string" default="4" />
+ <content type="string" default="0" />
<shortdesc lang="en">Wait X seconds after issuing ON/OFF</shortdesc>
</parameter>
<parameter name="shell_timeout" unique="0" required="0">
@@ -149,15 +141,10 @@
<content type="string" default="1" />
<shortdesc lang="en">Count of attempts to retry power on</shortdesc>
</parameter>
- <parameter name="sudo" unique="0" required="0">
- <getopt mixed="--use-sudo" />
- <content type="boolean" />
- <shortdesc lang="en">Use sudo (without password) when calling 3rd party software</shortdesc>
- </parameter>
- <parameter name="sudo_path" unique="0" required="0">
- <getopt mixed="--sudo-path=[path]" />
- <content type="string" default="/usr/bin/sudo" />
- <shortdesc lang="en">Path to sudo binary</shortdesc>
+ <parameter name="ssh_path" unique="0" required="0">
+ <getopt mixed="--ssh-path=[path]" />
+ <content type="string" default="/usr/bin/ssh" />
+ <shortdesc lang="en">Path to ssh binary</shortdesc>
</parameter>
</parameters>
<actions>
@@ -168,6 +155,5 @@
<action name="monitor" />
<action name="metadata" />
<action name="validate-all" />
- <action name="diag" />
</actions>
</resource-agent>
diff --git a/tests/fence_testing.py b/tests/fence_testing.py
index 166eaf8..524a56a 100755
--- a/tests/fence_testing.py
+++ b/tests/fence_testing.py
@@ -26,11 +26,11 @@ def _prepare_command(agent_file, method):
config = ConfigObj(agent_file, unrepr = True)
- assert (config.has_key("agent")), "Fence agent has to be defined"
+ assert ("agent" in config), "Fence agent has to be defined"
final_command = config["agent"]
stdin_values = None
- for opt in config["options"].keys():
+ for opt in list(config["options"].keys()):
assert isinstance(config["options"][opt], list), "Option %s have to have at least value and longopt"% (opt)
assert len(config["options"][opt]) >= 2, "Option %s have to have at least value and longopt"% (opt)
value = config["options"][opt][0]
@@ -75,8 +75,8 @@ def test_action(agent, action_file, method, verbose = False):
(command, stdin_options) = _prepare_command(agent, method)
for action in config["actions"]:
- assert action.has_key("command"), "Action %s need to have defined 'command'"% (action_file)
- assert action.has_key("return_code"), "Command %s (in %s) need to have 'return_code' defined"% (action_file, action["command"])
+ assert "command" in action, "Action %s need to have defined 'command'"% (action_file)
+ assert "return_code" in action, "Command %s (in %s) need to have 'return_code' defined"% (action_file, action["command"])
sleep_wait = None
current_command = None
@@ -113,14 +113,14 @@ def test_action(agent, action_file, method, verbose = False):
if verbose == False:
result = os.system(current_command + " &> /dev/null")
else:
- print current_command
+ print(current_command)
result = os.system(current_command)
exitcode = (result >> 8) & 0xFF
is_valid_result_code = re.search(action["return_code"], str(exitcode), re.IGNORECASE)
if is_valid_result_code == None:
- print "TEST FAILED: %s failed on %s when using (%s)\n"% (agent, action_file, method)
- print "TEST INFO: %s returns %s\n"% (action["command"], str(exitcode))
+ print(("TEST FAILED: %s failed on %s when using (%s)\n"% (agent, action_file, method)))
+ print(("TEST INFO: %s returns %s\n"% (action["command"], str(exitcode))))
return
- print "TEST PASSED: %s worked on %s (%s)\n"% (agent, action_file, method)
+ print(("TEST PASSED: %s worked on %s (%s)\n"% (agent, action_file, method)))
diff --git a/tests/fence_testing_test.py b/tests/fence_testing_test.py
index 368ff70..36b2a5e 100755
--- a/tests/fence_testing_test.py
+++ b/tests/fence_testing_test.py
@@ -25,27 +25,27 @@ class TestPrepareCommand(unittest.TestCase):
def test_is_action_ignored(self):
(command1, _) = fence_testing._prepare_command(self.DEVICE_CORRECT, "getopt")
(command2, _) = fence_testing._prepare_command(self.DEVICE_CORRECT_WITH_ACTION, "getopt")
- self.assertEquals(command1, command2)
+ self.assertEqual(command1, command2)
def test_is_stdin_empty(self):
(_, stdin) = fence_testing._prepare_command(self.DEVICE_CORRECT, "getopt")
- self.assertEquals(None, stdin)
+ self.assertEqual(None, stdin)
(_, stdin) = fence_testing._prepare_command(self.DEVICE_CORRECT, "longopt")
- self.assertEquals(None, stdin)
+ self.assertEqual(None, stdin)
def test_prepared_command_getopt(self):
## Test also fallback to longopt if short is not present
(command, _) = fence_testing._prepare_command(self.DEVICE_CORRECT, "getopt")
- self.assertEquals("/bin/true -l foo -p bar -a fence.example.com --plug 1", command)
+ self.assertEqual("/bin/true -l foo -p bar -a fence.example.com --plug 1", command)
def test_prepared_command_longopt(self):
(command, _) = fence_testing._prepare_command(self.DEVICE_CORRECT, "longopt")
- self.assertEquals("/bin/true --username foo --password bar --ip fence.example.com --plug 1", command)
+ self.assertEqual("/bin/true --username foo --password bar --ip fence.example.com --plug 1", command)
def test_prepared_command_stdin(self):
(command, stdin) = fence_testing._prepare_command(self.DEVICE_CORRECT, "stdin")
- self.assertEquals("/bin/true", command)
- self.assertEquals("login=foo\npasswd=bar\nipaddr=fence.example.com\nport=1\n", stdin)
+ self.assertEqual("/bin/true", command)
+ self.assertEqual("login=foo\npasswd=bar\nipaddr=fence.example.com\nport=1\n", stdin)
class TestTestAction(unittest.TestCase):
def test_valid_actions(self):
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/debian-ha/fence-agents.git
More information about the Debian-HA-Commits
mailing list