[Debian-live-changes] r1218 - in dists: sid
trunk/live-helper/debian trunk/live-helper/templates/syslinux
Daniel Baumann
daniel at alioth.debian.org
Fri May 4 08:02:56 UTC 2007
Author: daniel
Date: 2007-05-04 08:02:55 +0000 (Fri, 04 May 2007)
New Revision: 1218
Added:
dists/trunk/live-helper/templates/syslinux/f2.txt
dists/trunk/live-helper/templates/syslinux/f5.txt
dists/trunk/live-helper/templates/syslinux/f6.txt
dists/trunk/live-helper/templates/syslinux/f7.txt
Removed:
dists/sid/live-helper/
Modified:
dists/trunk/live-helper/debian/changelog
dists/trunk/live-helper/templates/syslinux/f1.txt
dists/trunk/live-helper/templates/syslinux/f10.txt
dists/trunk/live-helper/templates/syslinux/f3.txt
dists/trunk/live-helper/templates/syslinux/f4.txt
dists/trunk/live-helper/templates/syslinux/f8.txt
dists/trunk/live-helper/templates/syslinux/f9.txt
Log:
Modified: dists/trunk/live-helper/debian/changelog
===================================================================
--- dists/trunk/live-helper/debian/changelog 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/debian/changelog 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,4 +1,4 @@
-live-helper (1.0~a8-1) UNRELEASED; urgency=medium
+live-helper (1.0~a8-1) unstable; urgency=medium
* New upstream release:
- updated syslinux templates (Closes: #399658).
Modified: dists/trunk/live-helper/templates/syslinux/f1.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f1.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f1.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,25 +1,25 @@
- 0fWelcome to Debian Live07 09F107
+ 0fWelcome to Debian GNU/Linux!07 09F107
-This is a Debian Live system CD-ROM, built on LIVE_DATE.
+This is a Debian Live CD-ROM.
+It was built on LIVE_DATE.
0fHELP INDEX07
0fKEY TOPIC07
<09F107> This page, the help index.
+<09F207> Prerequisites for installing Debian.
<09F307> Boot methods for special ways of using this CD-ROM
-<09F407> Special boot parameters, overview.
-<09F807> How to get help.
-<09F907> About the Debian Live project.
+<09F407> Additional boot methods; rescue mode.
+<09F507> Special boot parameters, overview.
+<09F607> Special boot parameters for special machines.
+<09F707> Special boot parameters for selected disk controllers.
+<09F807> Special boot parameters for the install system.
+<09F907> How to get help.
<09F1007> Copyrights and warranties.
For F1-F9 type control and F then the digit 1-9
For F10 type control and F then the digit 0
-
-
-
-
-
Press F2 through F10 for details, or ENTER to
Modified: dists/trunk/live-helper/templates/syslinux/f10.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f10.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f10.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,6 +1,6 @@
0fCOPYRIGHTS AND WARRANTIES07 09F1007
-Debian GNU/Linux is Copyright (C) 1993-2006 Software in the Public Interest,
+Debian GNU/Linux is Copyright (C) 1993-2007 Software in the Public Interest,
and others.
The Debian GNU/Linux system is freely redistributable. After installation,
Added: dists/trunk/live-helper/templates/syslinux/f2.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f2.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f2.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -0,0 +1,23 @@
+ 0fPREREQUISITES FOR INSTALLING DEBIAN07 09F207
+
+You must have at least 32 megabytes of RAM to use this Debian installer.
+
+You should have space on your hard disk to create a new disk partition
+of at least 256 megabytes to install the base system. You'll need more
+disk space to install additional packages, depending on what you wish
+to do with your new Debian system.
+
+See the Installation Manual or the FAQ for more information; both
+documents are available at the Debian web site, 0fhttp://www.debian.org/07
+
+Thank you for choosing Debian!
+
+
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Modified: dists/trunk/live-helper/templates/syslinux/f3.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f3.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f3.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,23 +1,23 @@
0fBOOT METHODS07 09F307
+
0fAvailable boot methods:07
-0flive07
- Start the live system -- this is the default CD-ROM mode.
-0fmemtest07
- Start the memtest86+ RAM tester.
+0finstall07
+ Start the installation -- this is the default CD-ROM install.
+0finstallgui07
+ Start the installation using the graphical installer.
+0fexpert07
+ Start the installation in expert mode, for maximum control.
+0fexpertgui07
+ Start the installation in expert mode using the graphical installer.
To use one of these boot methods, type it at the prompt, optionally
followed by any boot parameters. For example:
- boot: live foo=bar
+ boot: install acpi=off
If unsure, you should use the default boot method, with no special
parameters, by simply pressing enter at the boot prompt.
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Modified: dists/trunk/live-helper/templates/syslinux/f4.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f4.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f4.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,23 +1,23 @@
- 0fSPECIAL BOOT PARAMETERS - VARIOUS HARDWARE07 09F407
+ 0fRESCUE MODE07 09F407
-You can use the following boot parameters at the 0fboot:07 prompt,
-in combination with the boot method (see <09F307>).
-0f
-OPTION PARAMETER TO SPECIFY07
-Check media for defects 0fintegrity-check07
-Set a static ip (no dhcp) 0fip=if,add,netm,gatew07
-Set a default locale 0flocale=<locale>07
-Suppress some debug informations 0fquiet07
-Show internal filesystems 0fshowmounts07
-Copy the live media to memory 0ftoram07
-Set initial display mode 0fvga=<mode>07
-For example:
+0fUse one of these boot methods to rescue an existing install07
- boot: live quiet vga=792 locale=it_IT.UTF-8
+0frescue07
+ Boot into rescue mode.
+0frescuegui07
+ Boot into rescue mode using the graphical installer.
-Press F1control and F then 1 for the help index, or ENTER to
+
+
+To use one of these boot methods, type it at the prompt, optionally
+followed by any boot parameters. For example:
+
+ boot: rescue acpi=off
+
+
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Added: dists/trunk/live-helper/templates/syslinux/f5.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f5.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f5.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -0,0 +1,23 @@
+ 0fSPECIAL BOOT PARAMETERS - OVERVIEW07 09F507
+
+On a few systems, you may need to specify a parameter at the 0fboot:07
+prompt in order to boot the system. For example, Linux may not be able
+to autodetect your hardware, and you may need to explicitly specify
+its location or type for it to be recognized.
+
+For more information about what boot parameters you can use, press:
+
+ <09F607> -- boot parameters for special machines
+ <09F707> -- boot parameters for various disk controllers
+ <09F807> -- boot parameters understood by the install system
+
+Note that to specify a parameter for a particular kernel module, use the form
+module.param=value, for example: libata.atapi_enabled=1
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Added: dists/trunk/live-helper/templates/syslinux/f6.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f6.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f6.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -0,0 +1,23 @@
+ 0fSPECIAL BOOT PARAMETERS - VARIOUS HARDWARE07 09F607
+
+You can use the following boot parameters at the 0fboot:07 prompt,
+in combination with the boot method (see <09F307>).
+If you use hex numbers you have to use the 0x prefix (e.g., 0x300).
+0f
+HARDWARE PARAMETER TO SPECIFY07
+IBM PS/1 or ValuePoint (IDE disk) 0fhd=0bcylinders0f,0bheads0f,0bsectors07
+Some IBM ThinkPads 0ffloppy.floppy=thinkpad07
+IBM Pentium Microchannel 0fmca-pentium no-hlt07
+Protect I/O port regions 0freserve=0biobase0f,0bextent07[0f,0b...07]
+Workaround faulty FPU (old machines) 0fno38707
+Laptops with screen display problems 0fvga=77107
+Use first serial port at 9600 baud 0fconsole=ttyS0,9600n807
+Force use of generic IDE driver 0fgeneric.all_generic_ide=107
+
+If you experience lockups or other hardware failures,
+disable buggy APIC interrupt routing 0fnoapic nolapic07
+
+For example:
+ boot: install vga=771 noapic nolapic
+
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Added: dists/trunk/live-helper/templates/syslinux/f7.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f7.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f7.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -0,0 +1,23 @@
+ 0fSPECIAL BOOT PARAMETERS - VARIOUS DISK DRIVES07 09F707
+
+You can use the following boot parameters at the 0fboot:07 prompt,
+in combination with the boot method (see <09F307>).
+0f
+HARDWARE PARAMETER TO SPECIFY07
+Adaptec 151x, 152x 0faha152x.aha152x=0biobase07[0f,0birq07[0f,0bscsi-id07[0f,0breconnect07]]]
+Adaptec 1542 0faha1542.aha1542=0biobase07[0f,0bbuson0f,0bbusoff07[0f,0bdmaspeed07]]
+Adaptec 274x, 284x 0faic7xxx.aic7xxx=no_reset07 (enabled if non-zero)
+BusLogic SCSI Hosts 0fBusLogic.BusLogic=0biobase07
+Certain DELL machines 0faic7xxx.aic7xxx=no_probe07
+
+This list is incomplete, see the kernel's kernel-parameters.txt file
+for more.
+
+
+
+
+For example:
+
+ boot: install aic7xxx.aic7xxx=no_probe
+
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Modified: dists/trunk/live-helper/templates/syslinux/f8.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f8.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f8.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,23 +1,23 @@
- 0fGETTING HELP07 09F807
+ 0fSPECIAL BOOT PARAMETERS - INSTALLATION SYSTEM07 09F807
-If you can't run Debian Live, don't despair! The Debian Live team is
-ready to help you! We are interested in hearing about problems, because
-in general they don't happen to only 0fone07 person.
-We've either already heard about your particular problem and can dispense a
-quick fix, or we would like to hear about it and work through it with you,
-and the next user who comes up with the same problem will profit from your
-experience!
+You can use the following boot parameters at the 0fboot:07 prompt,
+in combination with the boot method (see <09F307>). These parameters
+control how the installer works.
+0f
+RESULT PARAMETER07
+Verbose debugging 0fDEBCONF_DEBUG=507
+Debug boot sequence 0fBOOT_DEBUG=2|307
+Disable framebuffer 0ffb=false07
+Don't probe for USB 0fdebian-installer/probe/usb=false07
+Don't start PCMCIA 0fhw-detect/start_pcmcia=false07
+Force static network config 0fnetcfg/disable_dhcp=true07
+Set keyboard map 0fbootkbd=es07
+Use Braille tty 0fbrltty=driver,device,texttable07
+Use high contrast accessibility theme 0ftheme=dark07
+Use special tasks 0ftasks="kde-desktop, standard"07
-See the mailinglist and wiki for more information; both
-are available at the Debian Live web site, 0fhttp://debian-live.alioth.debian.org/07
+For example:
+ boot: install fb=false
-
-
-
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
Modified: dists/trunk/live-helper/templates/syslinux/f9.txt
===================================================================
--- dists/trunk/live-helper/templates/syslinux/f9.txt 2007-05-03 18:33:04 UTC (rev 1217)
+++ dists/trunk/live-helper/templates/syslinux/f9.txt 2007-05-04 08:02:55 UTC (rev 1218)
@@ -1,11 +1,16 @@
- 0fABOUT THE DEBIAN LIVE PROJECT07 09F907
+ 0fGETTING HELP07 09F907
-For information about the Debian Live project, see our web site:
-0fhttp://debian-live.alioth.debian.org/07
+If you can't install Debian, don't despair! The Debian team is ready to
+help you! We are especially interested in hearing about installation
+problems, because in general they don't happen to only 0fone07 person.
+We've either already heard about your particular problem and can dispense a
+quick fix, or we would like to hear about it and work through it with you,
+and the next user who comes up with the same problem will profit from your
+experience!
-For copyright information, press <09F1007>.
+See the Installation Manual or the FAQ for more information; both
+documents are available at the Debian web site, 0fhttp://www.debian.org/07
-Thank you for using Debian Live!
@@ -15,9 +20,4 @@
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to
+Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file
More information about the Debian-live-changes
mailing list