[SCM] live-boot branch, debian, updated. debian/2.0_a4-1
Daniel Baumann
daniel at debian.org
Wed Jun 2 20:54:05 UTC 2010
The following commit has been merged in the debian branch:
commit 4ae0534fc9dd76b58c263b300958e8515ec80cba
Author: Daniel Baumann <daniel at debian.org>
Date: Sun May 30 09:58:09 2010 +0200
Removing obsolete boot parameter from manpages.
diff --git a/manpages/de/live-boot.de.7 b/manpages/de/live-boot.de.7
index 0f7cb6f..f988c9d 100644
--- a/manpages/de/live-boot.de.7
+++ b/manpages/de/live-boot.de.7
@@ -66,8 +66,6 @@ Working: http://1.2.3.4/path/to/your_filesystem.squashfs
Also note that therefore it's currently not possible to fetch an image from
a namebased virtualhost of an httpd if it is sharing the ip with the main
httpd instance.
-.IP "\fBhostname\fP=\fIHOSTNAME\fP, \fBusername\fP=\fIUSER\fP, \fBuserfullname\fP=\fIUSERFULLNAME\fP" 4
-Those parameters lets you override values read from the config file.
.IP \fBignore_uuid\fP 4
Do not check that any UUID embedded in the initramfs matches the discovered
medium. live\-boot may be told to generate a UUID by setting
@@ -122,14 +120,6 @@ accordingly.
.IP \fBlive\-media\-timeout\fP=\fISECONDS\fP 4
Set the timeout in seconds for the device specified by "live\-media=" to
become ready before giving up.
-.IP {\fBlocale\fP|\fBdebian\-installer/locale\fP}=\fILOCALE\fP 4
-Configure the running locale as specified, if not present the live\-media
-rootfs configured locale will be used and if also this one misses live\-boot
-behave as "locale=en_US.UTF\-8" was specified. If only 2 lowercase letter are
-specified (like "it"), the "maybe wanted" locale is generated (like
-en:EN.UTF\-8), in this case if also "keyb=" is unspecified is set with those
-2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales are
-supported by live\-boot.
.IP \fBmodule\fP=\fINAME\fP 4
Instead of using the default optional file "filesystem.module" (see below)
another file could be specified without the extension ".module"; it should
@@ -140,12 +130,6 @@ This tells live\-boot to perform a network mount. The parameter "nfsroot="
filesystem. With no args, will try cifs first, and if it fails nfs.
.IP \fBnfsopts\fP= 4
This lets you specify custom nfs options.
-.IP \fBnoautologin\fP 4
-This parameter disables the automatic terminal login only, not touching
-gdk/kdm.
-.IP \fBnoxautologin\fP 4
-This parameter disables the automatic login of gdm/kdm only, not touching
-terminals.
.IP \fBnofastboot\fP 4
This parameter disables the default disabling of filesystem checks in
/etc/fstab. If you have static filesystems on your harddisk and you want
@@ -156,12 +140,8 @@ disables the "persistent" feature, useful if the bootloader (like syslinux)
has been installed with persistent enabled.
.IP \fBnoprompt\fP 4
Do not prompt to eject the CD or remove the USB flash drive on reboot.
-.IP \fBnosudo\fP 4
-This parameter disables the automatic configuration of sudo.
.IP \fBswapon\fP 4
This parameter enables usage of local swap partitions.
-.IP \fBnouser\fP 4
-This parameter disables the creation of the default user completely.
.IP \fBnoxautoconfig\fP 4
This parameter disables Xorg auto\-reconfiguration at boot time. This is
valuable if you either do the detection on your own, or, if you want to ship
@@ -200,9 +180,6 @@ If you boot with the normal quiet parameter, live\-boot hides most messages
of its own. When adding silent, it hides all.
.IP \fBtextonly\fP 4
Start up to text\-mode shell prompts, disabling the graphical user interface.
-.IP \fBtimezone\fP=\fITIMEZONE\fP 4
-By default, timezone is set to UTC. Using the timezone parameter, you can
-set it to your local zone, e.g. Europe/Zurich.
.IP \fBtodisk\fP=\fIDEVICE\fP 4
Adding this parameter, live\-boot will try to copy the entire read\-only media
to the specified device before mounting the root filesystem. It probably
@@ -216,9 +193,6 @@ lot of ram, according to the space used by the read\-only media.
.IP \fBunion\fP=aufs|unionfs 4
By default, live\-boot uses aufs. With this parameter, you can switch to
unionfs.
-.IP \fButc\fP=yes|no 4
-By default, Debian systems do assume that the hardware clock is set to
-UTC. You can change or explicitly set it with this parameter.
.IP \fBxdebconf\fP 4
Uses xdebconfigurator, if present on the rootfs, to configure X instead of
the standard procedure (experimental).
diff --git a/manpages/en/live-boot.7 b/manpages/en/live-boot.7
index cd4f7b7..899a1a0 100644
--- a/manpages/en/live-boot.7
+++ b/manpages/en/live-boot.7
@@ -40,8 +40,6 @@ Not working: http://example.com/path/to/your_filesystem.squashfs
Working: http://1.2.3.4/path/to/your_filesystem.squashfs
.br
Also note that therefore it's currently not possible to fetch an image from a namebased virtualhost of an httpd if it is sharing the ip with the main httpd instance.
-.IP "\fBhostname\fR=\fIHOSTNAME\fR, \fBusername\fR=\fIUSER\fR, \fBuserfullname\fR=\fIUSERFULLNAME\fR" 4
-Those parameters lets you override values read from the config file.
.IP "\fBignore_uuid\fR" 4
Do not check that any UUID embedded in the initramfs matches the discovered medium. live\-boot may be told to generate a UUID by setting LIVE_GENERATE_UUID=1 when building the initramfs.
.IP "\fBintegrity\-check\fR" 4
@@ -66,30 +64,20 @@ This way you could tell live\-boot that your image starts at offset BYTES in the
Sets the path to the live filesystem on the medium. By default, it is set to '/live' and you should not change that unless you have customized your media accordingly.
.IP "\fBlive\-media\-timeout\fR=\fISECONDS\fI" 4
Set the timeout in seconds for the device specified by "live\-media=" to become ready before giving up.
-.IP "{\fBlocale\fR|\fBdebian\-installer/locale\fR}=\fILOCALE\fR" 4
-Configure the running locale as specified, if not present the live\-media rootfs configured locale will be used and if also this one misses live\-boot behave as "locale=en_US.UTF\-8" was specified. If only 2 lowercase letter are specified (like "it"), the "maybe wanted" locale is generated (like en:EN.UTF\-8), in this case if also "keyb=" is unspecified is set with those 2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales are supported by live\-boot.
.IP "\fBmodule\fR=\fINAME\fR" 4
Instead of using the default optional file "filesystem.module" (see below) another file could be specified without the extension ".module"; it should be placed on "/live" directory of the live medium.
.IP "\fBnetboot\fR[=nfs|cifs]" 4
This tells live\-boot to perform a network mount. The parameter "nfsroot=" (with optional "nfsopts="), should specify where is the location of the root filesystem. With no args, will try cifs first, and if it fails nfs.
.IP "\fBnfsopts\fR=" 4
This lets you specify custom nfs options.
-.IP "\fBnoautologin\fR" 4
-This parameter disables the automatic terminal login only, not touching gdk/kdm.
-.IP "\fBnoxautologin\fR" 4
-This parameter disables the automatic login of gdm/kdm only, not touching terminals.
.IP "\fBnofastboot\fR" 4
This parameter disables the default disabling of filesystem checks in /etc/fstab. If you have static filesystems on your harddisk and you want them to be checked at boot time, use this parameter, otherwise they are skipped.
.IP "\fBnopersistent\fR" 4
disables the "persistent" feature, useful if the bootloader (like syslinux) has been installed with persistent enabled.
.IP "\fBnoprompt\fR" 4
Do not prompt to eject the CD or remove the USB flash drive on reboot.
-.IP "\fBnosudo\fR" 4
-This parameter disables the automatic configuration of sudo.
.IP "\fBswapon\fR" 4
This parameter enables usage of local swap partitions.
-.IP "\fBnouser\fR" 4
-This parameter disables the creation of the default user completely.
.IP "\fBnoxautoconfig\fR" 4
This parameter disables Xorg auto\-reconfiguration at boot time. This is valuable if you either do the detection on your own, or, if you want to ship a custom, premade xorg.conf in your live system.
.IP "\fBpersistent\fR[=nofiles]" 4
@@ -108,16 +96,12 @@ This parameter will make live\-boot to show on "/" the ro filesystems (mostly co
If you boot with the normal quiet parameter, live\-boot hides most messages of its own. When adding silent, it hides all.
.IP "\fBtextonly\fR" 4
Start up to text\-mode shell prompts, disabling the graphical user interface.
-.IP "\fBtimezone\fR=\fITIMEZONE\fR" 4
-By default, timezone is set to UTC. Using the timezone parameter, you can set it to your local zone, e.g. Europe/Zurich.
.IP "\fBtodisk\fR=\fIDEVICE\fR" 4
Adding this parameter, live\-boot will try to copy the entire read\-only media to the specified device before mounting the root filesystem. It probably needs a lot of free space. Subsequent boots should then skip this step and just specify the "live\-media=DEVICE" boot parameter with the same DEVICE used this time.
.IP "\fBtoram\fR" 4
Adding this parameter, live\-boot will try to copy the whole read\-only media to the computer's RAM before mounting the root filesystem. This could need a lot of ram, according to the space used by the read\-only media.
.IP "\fBunion\fR=aufs|unionfs\fR" 4
By default, live\-boot uses aufs. With this parameter, you can switch to unionfs.
-.IP "\fButc\fR=yes|no" 4
-By default, Debian systems do assume that the hardware clock is set to UTC. You can change or explicitly set it with this parameter.
.IP "\fBxdebconf\fR" 4
Uses xdebconfigurator, if present on the rootfs, to configure X instead of the standard procedure (experimental).
.IP "\fBxvideomode\fR=\fIRESOLUTION\fR" 4
diff --git a/manpages/po/de/live-boot.7.po b/manpages/po/de/live-boot.7.po
index 2f0cd12..c2e05f6 100644
--- a/manpages/po/de/live-boot.7.po
+++ b/manpages/po/de/live-boot.7.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: live-boot 2.0~a3\n"
-"POT-Creation-Date: 2010-05-30 09:26+0300\n"
+"POT-Creation-Date: 2010-05-30 09:55+0300\n"
"PO-Revision-Date: 2010-05-24 12:34+0300\n"
"Last-Translator: Daniel Baumann <daniel at debian.org>\n"
"Language-Team: none\n"
@@ -221,22 +221,11 @@ msgstr ""
#. type: IP
#: en/live-boot.7:43
#, no-wrap
-msgid "B<hostname>=I<HOSTNAME>, B<username>=I<USER>, B<userfullname>=I<USERFULLNAME>"
-msgstr "B<hostname>=I<HOSTNAME>, B<username>=I<USER>, B<userfullname>=I<USERFULLNAME>"
-
-#. type: Plain text
-#: en/live-boot.7:45
-msgid "Those parameters lets you override values read from the config file."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:45
-#, no-wrap
msgid "B<ignore_uuid>"
msgstr "B<ignore_uuid>"
#. type: Plain text
-#: en/live-boot.7:47
+#: en/live-boot.7:45
msgid ""
"Do not check that any UUID embedded in the initramfs matches the discovered "
"medium. live-boot may be told to generate a UUID by setting "
@@ -244,13 +233,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:47
+#: en/live-boot.7:45
#, no-wrap
msgid "B<integrity-check>"
msgstr "B<integrity-check>"
#. type: Plain text
-#: en/live-boot.7:49
+#: en/live-boot.7:47
msgid ""
"If specified, an MD5 sum is calculated on the live media during boot and "
"compared to the value found in md5sum.txt found in the root directory of the "
@@ -258,13 +247,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:49
+#: en/live-boot.7:47
#, no-wrap
msgid "B<ip>=[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>] [,[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>]]"
msgstr "B<ip>=[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>] [,[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>]]"
#. type: Plain text
-#: en/live-boot.7:51
+#: en/live-boot.7:49
msgid ""
"Let you specify the name(s) and the options of the interface(s) that should "
"be configured at boot time. Do not specify this if you want to use dhcp "
@@ -274,13 +263,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:51
+#: en/live-boot.7:49
#, no-wrap
msgid "B<ip>=[I<frommedia>]"
msgstr "B<ip>=[I<frommedia>]"
#. type: Plain text
-#: en/live-boot.7:53
+#: en/live-boot.7:51
msgid ""
"If this variable is set, dhcp and static configuration are just skipped and "
"the system will use the (must be) media-preconfigured /etc/network/"
@@ -288,13 +277,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:53
+#: en/live-boot.7:51
#, no-wrap
msgid "{B<keyb>|B<kbd-chooser/method>}=I<KEYBOARD>, {B<klayout>|B<console-setup/layoutcode>}=I<LAYOUT>, {B<kvariant>|B<console-setup/variantcode>}=I<VARIANT>, {B<kmodel>I<|>B<console-setup/modelcode>}=I<CODE>, B<koptions>=I<OPTIONS>"
msgstr "{B<keyb>|B<kbd-chooser/method>}=I<KEYBOARD>, {B<klayout>|B<console-setup/layoutcode>}=I<LAYOUT>, {B<kvariant>|B<console-setup/variantcode>}=I<VARIANT>, {B<kmodel>I<|>B<console-setup/modelcode>}=I<CODE>, B<koptions>=I<OPTIONS>"
#. type: Plain text
-#: en/live-boot.7:55
+#: en/live-boot.7:53
msgid ""
"Configure the running keyboard as specified, if this one misses live-boot "
"behaves as if \"keyb=us\" was specified. It will be interfered from \"locale="
@@ -303,13 +292,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:55
+#: en/live-boot.7:53
#, no-wrap
msgid "B<live-getty>"
msgstr "B<live-getty>"
#. type: Plain text
-#: en/live-boot.7:57
+#: en/live-boot.7:55
msgid ""
"This changes the auto-login on virtual terminals to use the (experimental) "
"live-getty code. With this option set the standard kernel argument \"console="
@@ -318,13 +307,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:57
+#: en/live-boot.7:55
#, no-wrap
msgid "{B<live-media>|B<bootfrom>}=I<DEVICE>"
msgstr "{B<live-media>|B<bootfrom>}=I<DEVICE>"
#. type: Plain text
-#: en/live-boot.7:59
+#: en/live-boot.7:57
msgid ""
"If you specify one of this two equivalent forms, live-boot will first try to "
"find this device for the \"/live\" directory where the read-only root "
@@ -333,7 +322,7 @@ msgid ""
msgstr ""
#. type: Plain text
-#: en/live-boot.7:61
+#: en/live-boot.7:59
msgid ""
"Instead of specifing an actual device name, the keyword 'removable' can be "
"used to limit the search of acceptable live media to removable type only. "
@@ -342,13 +331,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:61
+#: en/live-boot.7:59
#, no-wrap
msgid "{B<live-media-encryption>|B<encryption>}=I<TYPE>"
msgstr "{B<live-media-encryption>|B<encryption>}=I<TYPE>"
#. type: Plain text
-#: en/live-boot.7:63
+#: en/live-boot.7:61
msgid ""
"live-boot will mount the encrypted rootfs TYPE, asking the passphrase, "
"useful to build paranoid live systems :-). TYPE supported so far are \"aes\" "
@@ -356,13 +345,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:63
+#: en/live-boot.7:61
#, no-wrap
msgid "B<live-media-offset>=I<BYTES>"
msgstr "B<live-media-offset>=I<BYTES>"
#. type: Plain text
-#: en/live-boot.7:65
+#: en/live-boot.7:63
msgid ""
"This way you could tell live-boot that your image starts at offset BYTES in "
"the above specified or autodiscovered device, this could be useful to hide "
@@ -371,13 +360,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:65
+#: en/live-boot.7:63
#, no-wrap
msgid "B<live-media-path>=I<PATH>"
msgstr "B<live-media-path>=I<PATH>"
#. type: Plain text
-#: en/live-boot.7:67
+#: en/live-boot.7:65
msgid ""
"Sets the path to the live filesystem on the medium. By default, it is set to "
"'/live' and you should not change that unless you have customized your media "
@@ -385,44 +374,26 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:67
+#: en/live-boot.7:65
#, no-wrap
msgid "B<live-media-timeout>=I<SECONDS>"
msgstr "B<live-media-timeout>=I<SECONDS>"
#. type: Plain text
-#: en/live-boot.7:69
+#: en/live-boot.7:67
msgid ""
"Set the timeout in seconds for the device specified by \"live-media=\" to "
"become ready before giving up."
msgstr ""
#. type: IP
-#: en/live-boot.7:69
-#, no-wrap
-msgid "{B<locale>|B<debian-installer/locale>}=I<LOCALE>"
-msgstr "{B<locale>|B<debian-installer/locale>}=I<LOCALE>"
-
-#. type: Plain text
-#: en/live-boot.7:71
-msgid ""
-"Configure the running locale as specified, if not present the live-media "
-"rootfs configured locale will be used and if also this one misses live-boot "
-"behave as \"locale=en_US.UTF-8\" was specified. If only 2 lowercase letter "
-"are specified (like \"it\"), the \"maybe wanted\" locale is generated (like "
-"en:EN.UTF-8), in this case if also \"keyb=\" is unspecified is set with "
-"those 2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales "
-"are supported by live-boot."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:71
+#: en/live-boot.7:67
#, no-wrap
msgid "B<module>=I<NAME>"
msgstr "B<module>=I<NAME>"
#. type: Plain text
-#: en/live-boot.7:73
+#: en/live-boot.7:69
msgid ""
"Instead of using the default optional file \"filesystem.module\" (see below) "
"another file could be specified without the extension \".module\"; it should "
@@ -430,13 +401,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:73
+#: en/live-boot.7:69
#, no-wrap
msgid "B<netboot>[=nfs|cifs]"
msgstr "B<netboot>[=nfs|cifs]"
#. type: Plain text
-#: en/live-boot.7:75
+#: en/live-boot.7:71
msgid ""
"This tells live-boot to perform a network mount. The parameter \"nfsroot="
"\" (with optional \"nfsopts=\"), should specify where is the location of the "
@@ -444,50 +415,24 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:75
+#: en/live-boot.7:71
#, no-wrap
msgid "B<nfsopts>="
msgstr "B<nfsopts>="
#. type: Plain text
-#: en/live-boot.7:77
+#: en/live-boot.7:73
msgid "This lets you specify custom nfs options."
msgstr ""
#. type: IP
-#: en/live-boot.7:77
-#, no-wrap
-msgid "B<noautologin>"
-msgstr "B<noautologin>"
-
-#. type: Plain text
-#: en/live-boot.7:79
-msgid ""
-"This parameter disables the automatic terminal login only, not touching gdk/"
-"kdm."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:79
-#, no-wrap
-msgid "B<noxautologin>"
-msgstr "B<noxautologin>"
-
-#. type: Plain text
-#: en/live-boot.7:81
-msgid ""
-"This parameter disables the automatic login of gdm/kdm only, not touching "
-"terminals."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:81
+#: en/live-boot.7:73
#, no-wrap
msgid "B<nofastboot>"
msgstr "B<nofastboot>"
#. type: Plain text
-#: en/live-boot.7:83
+#: en/live-boot.7:75
msgid ""
"This parameter disables the default disabling of filesystem checks in /etc/"
"fstab. If you have static filesystems on your harddisk and you want them to "
@@ -495,70 +440,48 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:83
+#: en/live-boot.7:75
#, no-wrap
msgid "B<nopersistent>"
msgstr "B<nopersistent>"
#. type: Plain text
-#: en/live-boot.7:85
+#: en/live-boot.7:77
msgid ""
"disables the \"persistent\" feature, useful if the bootloader (like "
"syslinux) has been installed with persistent enabled."
msgstr ""
#. type: IP
-#: en/live-boot.7:85
+#: en/live-boot.7:77
#, no-wrap
msgid "B<noprompt>"
msgstr "B<noprompt>"
#. type: Plain text
-#: en/live-boot.7:87
+#: en/live-boot.7:79
msgid "Do not prompt to eject the CD or remove the USB flash drive on reboot."
msgstr ""
#. type: IP
-#: en/live-boot.7:87
-#, no-wrap
-msgid "B<nosudo>"
-msgstr "B<nosudo>"
-
-#. type: Plain text
-#: en/live-boot.7:89
-msgid "This parameter disables the automatic configuration of sudo."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:89
+#: en/live-boot.7:79
#, no-wrap
msgid "B<swapon>"
msgstr "B<swapon>"
#. type: Plain text
-#: en/live-boot.7:91
+#: en/live-boot.7:81
msgid "This parameter enables usage of local swap partitions."
msgstr ""
#. type: IP
-#: en/live-boot.7:91
-#, no-wrap
-msgid "B<nouser>"
-msgstr "B<nouser>"
-
-#. type: Plain text
-#: en/live-boot.7:93
-msgid "This parameter disables the creation of the default user completely."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:93
+#: en/live-boot.7:81
#, no-wrap
msgid "B<noxautoconfig>"
msgstr "B<noxautoconfig>"
#. type: Plain text
-#: en/live-boot.7:95
+#: en/live-boot.7:83
msgid ""
"This parameter disables Xorg auto-reconfiguration at boot time. This is "
"valuable if you either do the detection on your own, or, if you want to ship "
@@ -566,13 +489,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:95
+#: en/live-boot.7:83
#, no-wrap
msgid "B<persistent>[=nofiles]"
msgstr "B<persistent>[=nofiles]"
#. type: Plain text
-#: en/live-boot.7:97
+#: en/live-boot.7:85
msgid ""
"live-boot will look for persistent and snapshot partitions or files labeled "
"\"live-rw\", \"home-rw\", and files called \"live-sn*\", \"home-sn*\" and "
@@ -586,13 +509,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:97
+#: en/live-boot.7:85
#, no-wrap
msgid "B<persistent-path>=I<PATH>"
msgstr "B<persistent-path>=I<PATH>"
#. type: Plain text
-#: en/live-boot.7:99
+#: en/live-boot.7:87
msgid ""
"live-boot will look for persistency files in the root directory of a "
"partition, with this parameter, the path can be configured so that you can "
@@ -600,26 +523,26 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:99
+#: en/live-boot.7:87
#, no-wrap
msgid "{B<preseed/file>|B<file>}=I<FILE>"
msgstr "{B<preseed/file>|B<file>}=I<FILE>"
#. type: Plain text
-#: en/live-boot.7:101
+#: en/live-boot.7:89
msgid ""
"A path to a file present on the rootfs could be used to preseed debconf "
"database."
msgstr ""
#. type: IP
-#: en/live-boot.7:101
+#: en/live-boot.7:89
#, no-wrap
msgid "B<package/question>=I<VALUE>"
msgstr "B<package/question>=I<VALUE>"
#. type: Plain text
-#: en/live-boot.7:103
+#: en/live-boot.7:91
msgid ""
"All debian installed packages could be preseeded from command-line that way, "
"beware of blanks spaces, they will interfere with parsing, use a preseed "
@@ -627,26 +550,26 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:103
+#: en/live-boot.7:91
#, no-wrap
msgid "B<quickreboot>"
msgstr "B<quickreboot>"
#. type: Plain text
-#: en/live-boot.7:105
+#: en/live-boot.7:93
msgid ""
"This option causes live-boot to reboot without attempting to eject the media "
"and without asking the user to remove the boot media."
msgstr ""
#. type: IP
-#: en/live-boot.7:105
+#: en/live-boot.7:93
#, no-wrap
msgid "B<showmounts>"
msgstr "B<showmounts>"
#. type: Plain text
-#: en/live-boot.7:107
+#: en/live-boot.7:95
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
"(mostly compressed) on \"/live\". This is not enabled by default because "
@@ -655,51 +578,38 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:107
+#: en/live-boot.7:95
#, no-wrap
msgid "B<silent>"
msgstr "B<silent>"
#. type: Plain text
-#: en/live-boot.7:109
+#: en/live-boot.7:97
msgid ""
"If you boot with the normal quiet parameter, live-boot hides most messages "
"of its own. When adding silent, it hides all."
msgstr ""
#. type: IP
-#: en/live-boot.7:109
+#: en/live-boot.7:97
#, no-wrap
msgid "B<textonly>"
msgstr "B<textonly>"
#. type: Plain text
-#: en/live-boot.7:111
+#: en/live-boot.7:99
msgid ""
"Start up to text-mode shell prompts, disabling the graphical user interface."
msgstr ""
#. type: IP
-#: en/live-boot.7:111
-#, no-wrap
-msgid "B<timezone>=I<TIMEZONE>"
-msgstr "B<timezone>=I<TIMEZONE>"
-
-#. type: Plain text
-#: en/live-boot.7:113
-msgid ""
-"By default, timezone is set to UTC. Using the timezone parameter, you can "
-"set it to your local zone, e.g. Europe/Zurich."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:113
+#: en/live-boot.7:99
#, no-wrap
msgid "B<todisk>=I<DEVICE>"
msgstr "B<todisk>=I<DEVICE>"
#. type: Plain text
-#: en/live-boot.7:115
+#: en/live-boot.7:101
msgid ""
"Adding this parameter, live-boot will try to copy the entire read-only media "
"to the specified device before mounting the root filesystem. It probably "
@@ -709,13 +619,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:115
+#: en/live-boot.7:101
#, no-wrap
msgid "B<toram>"
msgstr "B<toram>"
#. type: Plain text
-#: en/live-boot.7:117
+#: en/live-boot.7:103
msgid ""
"Adding this parameter, live-boot will try to copy the whole read-only media "
"to the computer's RAM before mounting the root filesystem. This could need a "
@@ -723,84 +633,71 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:117
+#: en/live-boot.7:103
#, no-wrap
msgid "B<union>=aufs|unionfs"
msgstr "B<union>=aufs|unionfs"
#. type: Plain text
-#: en/live-boot.7:119
+#: en/live-boot.7:105
msgid ""
"By default, live-boot uses aufs. With this parameter, you can switch to "
"unionfs."
msgstr ""
#. type: IP
-#: en/live-boot.7:119
-#, no-wrap
-msgid "B<utc>=yes|no"
-msgstr "B<utc>=yes|no"
-
-#. type: Plain text
-#: en/live-boot.7:121
-msgid ""
-"By default, Debian systems do assume that the hardware clock is set to UTC. "
-"You can change or explicitly set it with this parameter."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:121
+#: en/live-boot.7:105
#, no-wrap
msgid "B<xdebconf>"
msgstr "B<xdebconf>"
#. type: Plain text
-#: en/live-boot.7:123
+#: en/live-boot.7:107
msgid ""
"Uses xdebconfigurator, if present on the rootfs, to configure X instead of "
"the standard procedure (experimental)."
msgstr ""
#. type: IP
-#: en/live-boot.7:123
+#: en/live-boot.7:107
#, no-wrap
msgid "B<xvideomode>=I<RESOLUTION>"
msgstr "B<xvideomode>=I<RESOLUTION>"
#. FIXME
#. type: Plain text
-#: en/live-boot.7:126
+#: en/live-boot.7:110
msgid "Doesn't do xorg autodetection, but enforces a given resolution."
msgstr ""
#. FIXME
#. type: SH
-#: en/live-boot.7:128
+#: en/live-boot.7:112
#, no-wrap
msgid "FILES (old)"
msgstr ""
#. type: IP
-#: en/live-boot.7:129 en/live-snapshot.1:43
+#: en/live-boot.7:113 en/live-snapshot.1:43
#, no-wrap
msgid "B</etc/live.conf>"
msgstr "B</etc/live.conf>"
#. type: Plain text
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
msgid ""
"Some variables can be configured via this config file (inside the live "
"system)."
msgstr ""
#. type: IP
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
#, no-wrap
msgid "B<live/filesystem.module>"
msgstr "B<live/filesystem.module>"
#. type: Plain text
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
msgid ""
"This optional file (inside the live media) contains a list of white-space or "
"carriage-return-separated file names corresponding to disk images in the \"/"
@@ -813,13 +710,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
#, no-wrap
msgid "B</etc/live-persistence.binds>"
msgstr "B</etc/live-persistence.binds>"
#. type: Plain text
-#: en/live-boot.7:135 en/live-snapshot.1:49
+#: en/live-boot.7:119 en/live-snapshot.1:49
msgid ""
"This optional file (which resides in the rootfs system, not in the live "
"media) is used as a list of directories which not need be persistent: ie. "
@@ -828,7 +725,7 @@ msgid ""
msgstr ""
#. type: Plain text
-#: en/live-boot.7:138 en/live-snapshot.1:51
+#: en/live-boot.7:122 en/live-snapshot.1:51
msgid ""
"This saves expensive writes and speeds up operations on volatile data such "
"as web caches and temporary files (like e.g. /tmp and .mozilla) which are "
@@ -837,64 +734,64 @@ msgid ""
msgstr ""
#. type: SH
-#: en/live-boot.7:139 en/live-snapshot.1:42
+#: en/live-boot.7:123 en/live-snapshot.1:42
#, no-wrap
msgid "FILES"
msgstr "DATEIEN"
#. type: IP
-#: en/live-boot.7:140
+#: en/live-boot.7:124
#, no-wrap
msgid "B</etc/live/boot.conf>"
msgstr "B</etc/live/boot.conf>"
#. type: IP
-#: en/live-boot.7:141
+#: en/live-boot.7:125
#, no-wrap
msgid "B</etc/live/boot.conf.d/>"
msgstr "B</etc/live/boot.conf.d/>"
#. type: IP
-#: en/live-boot.7:142
+#: en/live-boot.7:126
#, no-wrap
msgid "B<live/boot.conf>"
msgstr "B<live/boot.conf>"
#. type: IP
-#: en/live-boot.7:143
+#: en/live-boot.7:127
#, no-wrap
msgid "B<live/boot.conf.d/>"
msgstr "B<live/boot.conf.d/>"
#. type: SH
-#: en/live-boot.7:145 en/live-snapshot.1:52
+#: en/live-boot.7:129 en/live-snapshot.1:52
#, no-wrap
msgid "SEE ALSO"
msgstr "SIEHE AUCH"
#. type: Plain text
-#: en/live-boot.7:147
+#: en/live-boot.7:131
msgid "I<live-snapshot>(1)"
msgstr "I<live-snapshot>(1)"
#. type: Plain text
-#: en/live-boot.7:149 en/live-snapshot.1:56
+#: en/live-boot.7:133 en/live-snapshot.1:56
msgid "I<live-config>(7)"
msgstr "I<live-config>(7)"
#. type: Plain text
-#: en/live-boot.7:151 en/live-snapshot.1:58
+#: en/live-boot.7:135 en/live-snapshot.1:58
msgid "I<live-helper>(7)"
msgstr "I<live-helper>(7)"
#. type: SH
-#: en/live-boot.7:152 en/live-snapshot.1:59
+#: en/live-boot.7:136 en/live-snapshot.1:59
#, no-wrap
msgid "HOMEPAGE"
msgstr "HOMEPAGE"
#. type: Plain text
-#: en/live-boot.7:154 en/live-snapshot.1:61
+#: en/live-boot.7:138 en/live-snapshot.1:61
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
@@ -905,13 +802,13 @@ msgstr ""
"unter E<lt>I<http://live.debian.net/manual/>E<gt> gefunden werden."
#. type: SH
-#: en/live-boot.7:155 en/live-snapshot.1:62
+#: en/live-boot.7:139 en/live-snapshot.1:62
#, no-wrap
msgid "BUGS"
msgstr "FEHLER"
#. type: Plain text
-#: en/live-boot.7:157 en/live-snapshot.1:64
+#: en/live-boot.7:141 en/live-snapshot.1:64
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
@@ -925,13 +822,13 @@ msgstr ""
"werden."
#. type: SH
-#: en/live-boot.7:158 en/live-snapshot.1:65
+#: en/live-boot.7:142 en/live-snapshot.1:65
#, no-wrap
msgid "AUTHOR"
msgstr "AUTOR"
#. type: Plain text
-#: en/live-boot.7:159 en/live-snapshot.1:66
+#: en/live-boot.7:143 en/live-snapshot.1:66
msgid ""
"live-boot was written by Daniel Baumann E<lt>I<daniel at debian.org>E<gt> for "
"the Debian project."
diff --git a/manpages/pot/live-boot.7.pot b/manpages/pot/live-boot.7.pot
index 13a8ec4..7fb644e 100644
--- a/manpages/pot/live-boot.7.pot
+++ b/manpages/pot/live-boot.7.pot
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: live-boot VERSION\n"
-"POT-Creation-Date: 2010-05-30 09:26+0300\n"
+"POT-Creation-Date: 2010-05-30 09:55+0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
"Language-Team: LANGUAGE <LL at li.org>\n"
@@ -215,22 +215,11 @@ msgstr ""
#. type: IP
#: en/live-boot.7:43
#, no-wrap
-msgid "B<hostname>=I<HOSTNAME>, B<username>=I<USER>, B<userfullname>=I<USERFULLNAME>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:45
-msgid "Those parameters lets you override values read from the config file."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:45
-#, no-wrap
msgid "B<ignore_uuid>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:47
+#: en/live-boot.7:45
msgid ""
"Do not check that any UUID embedded in the initramfs matches the discovered "
"medium. live-boot may be told to generate a UUID by setting "
@@ -238,13 +227,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:47
+#: en/live-boot.7:45
#, no-wrap
msgid "B<integrity-check>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:49
+#: en/live-boot.7:47
msgid ""
"If specified, an MD5 sum is calculated on the live media during boot and "
"compared to the value found in md5sum.txt found in the root directory of the "
@@ -252,13 +241,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:49
+#: en/live-boot.7:47
#, no-wrap
msgid "B<ip>=[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>] [,[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>]]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:51
+#: en/live-boot.7:49
msgid ""
"Let you specify the name(s) and the options of the interface(s) that should "
"be configured at boot time. Do not specify this if you want to use dhcp "
@@ -268,13 +257,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:51
+#: en/live-boot.7:49
#, no-wrap
msgid "B<ip>=[I<frommedia>]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:53
+#: en/live-boot.7:51
msgid ""
"If this variable is set, dhcp and static configuration are just skipped and "
"the system will use the (must be) media-preconfigured /etc/network/"
@@ -282,13 +271,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:53
+#: en/live-boot.7:51
#, no-wrap
msgid "{B<keyb>|B<kbd-chooser/method>}=I<KEYBOARD>, {B<klayout>|B<console-setup/layoutcode>}=I<LAYOUT>, {B<kvariant>|B<console-setup/variantcode>}=I<VARIANT>, {B<kmodel>I<|>B<console-setup/modelcode>}=I<CODE>, B<koptions>=I<OPTIONS>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:55
+#: en/live-boot.7:53
msgid ""
"Configure the running keyboard as specified, if this one misses live-boot "
"behaves as if \"keyb=us\" was specified. It will be interfered from \"locale="
@@ -297,13 +286,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:55
+#: en/live-boot.7:53
#, no-wrap
msgid "B<live-getty>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:57
+#: en/live-boot.7:55
msgid ""
"This changes the auto-login on virtual terminals to use the (experimental) "
"live-getty code. With this option set the standard kernel argument \"console="
@@ -312,13 +301,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:57
+#: en/live-boot.7:55
#, no-wrap
msgid "{B<live-media>|B<bootfrom>}=I<DEVICE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:59
+#: en/live-boot.7:57
msgid ""
"If you specify one of this two equivalent forms, live-boot will first try to "
"find this device for the \"/live\" directory where the read-only root "
@@ -327,7 +316,7 @@ msgid ""
msgstr ""
#. type: Plain text
-#: en/live-boot.7:61
+#: en/live-boot.7:59
msgid ""
"Instead of specifing an actual device name, the keyword 'removable' can be "
"used to limit the search of acceptable live media to removable type only. "
@@ -336,13 +325,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:61
+#: en/live-boot.7:59
#, no-wrap
msgid "{B<live-media-encryption>|B<encryption>}=I<TYPE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:63
+#: en/live-boot.7:61
msgid ""
"live-boot will mount the encrypted rootfs TYPE, asking the passphrase, "
"useful to build paranoid live systems :-). TYPE supported so far are \"aes\" "
@@ -350,13 +339,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:63
+#: en/live-boot.7:61
#, no-wrap
msgid "B<live-media-offset>=I<BYTES>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:65
+#: en/live-boot.7:63
msgid ""
"This way you could tell live-boot that your image starts at offset BYTES in "
"the above specified or autodiscovered device, this could be useful to hide "
@@ -365,13 +354,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:65
+#: en/live-boot.7:63
#, no-wrap
msgid "B<live-media-path>=I<PATH>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:67
+#: en/live-boot.7:65
msgid ""
"Sets the path to the live filesystem on the medium. By default, it is set to "
"'/live' and you should not change that unless you have customized your media "
@@ -379,44 +368,26 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:67
+#: en/live-boot.7:65
#, no-wrap
msgid "B<live-media-timeout>=I<SECONDS>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:69
+#: en/live-boot.7:67
msgid ""
"Set the timeout in seconds for the device specified by \"live-media=\" to "
"become ready before giving up."
msgstr ""
#. type: IP
-#: en/live-boot.7:69
-#, no-wrap
-msgid "{B<locale>|B<debian-installer/locale>}=I<LOCALE>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:71
-msgid ""
-"Configure the running locale as specified, if not present the live-media "
-"rootfs configured locale will be used and if also this one misses live-boot "
-"behave as \"locale=en_US.UTF-8\" was specified. If only 2 lowercase letter "
-"are specified (like \"it\"), the \"maybe wanted\" locale is generated (like "
-"en:EN.UTF-8), in this case if also \"keyb=\" is unspecified is set with "
-"those 2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales "
-"are supported by live-boot."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:71
+#: en/live-boot.7:67
#, no-wrap
msgid "B<module>=I<NAME>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:73
+#: en/live-boot.7:69
msgid ""
"Instead of using the default optional file \"filesystem.module\" (see below) "
"another file could be specified without the extension \".module\"; it should "
@@ -424,13 +395,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:73
+#: en/live-boot.7:69
#, no-wrap
msgid "B<netboot>[=nfs|cifs]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:75
+#: en/live-boot.7:71
msgid ""
"This tells live-boot to perform a network mount. The parameter \"nfsroot="
"\" (with optional \"nfsopts=\"), should specify where is the location of the "
@@ -438,50 +409,24 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:75
+#: en/live-boot.7:71
#, no-wrap
msgid "B<nfsopts>="
msgstr ""
#. type: Plain text
-#: en/live-boot.7:77
+#: en/live-boot.7:73
msgid "This lets you specify custom nfs options."
msgstr ""
#. type: IP
-#: en/live-boot.7:77
-#, no-wrap
-msgid "B<noautologin>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:79
-msgid ""
-"This parameter disables the automatic terminal login only, not touching gdk/"
-"kdm."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:79
-#, no-wrap
-msgid "B<noxautologin>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:81
-msgid ""
-"This parameter disables the automatic login of gdm/kdm only, not touching "
-"terminals."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:81
+#: en/live-boot.7:73
#, no-wrap
msgid "B<nofastboot>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:83
+#: en/live-boot.7:75
msgid ""
"This parameter disables the default disabling of filesystem checks in /etc/"
"fstab. If you have static filesystems on your harddisk and you want them to "
@@ -489,70 +434,48 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:83
+#: en/live-boot.7:75
#, no-wrap
msgid "B<nopersistent>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:85
+#: en/live-boot.7:77
msgid ""
"disables the \"persistent\" feature, useful if the bootloader (like "
"syslinux) has been installed with persistent enabled."
msgstr ""
#. type: IP
-#: en/live-boot.7:85
+#: en/live-boot.7:77
#, no-wrap
msgid "B<noprompt>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:87
+#: en/live-boot.7:79
msgid "Do not prompt to eject the CD or remove the USB flash drive on reboot."
msgstr ""
#. type: IP
-#: en/live-boot.7:87
-#, no-wrap
-msgid "B<nosudo>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:89
-msgid "This parameter disables the automatic configuration of sudo."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:89
+#: en/live-boot.7:79
#, no-wrap
msgid "B<swapon>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:91
+#: en/live-boot.7:81
msgid "This parameter enables usage of local swap partitions."
msgstr ""
#. type: IP
-#: en/live-boot.7:91
-#, no-wrap
-msgid "B<nouser>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:93
-msgid "This parameter disables the creation of the default user completely."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:93
+#: en/live-boot.7:81
#, no-wrap
msgid "B<noxautoconfig>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:95
+#: en/live-boot.7:83
msgid ""
"This parameter disables Xorg auto-reconfiguration at boot time. This is "
"valuable if you either do the detection on your own, or, if you want to ship "
@@ -560,13 +483,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:95
+#: en/live-boot.7:83
#, no-wrap
msgid "B<persistent>[=nofiles]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:97
+#: en/live-boot.7:85
msgid ""
"live-boot will look for persistent and snapshot partitions or files labeled "
"\"live-rw\", \"home-rw\", and files called \"live-sn*\", \"home-sn*\" and "
@@ -580,13 +503,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:97
+#: en/live-boot.7:85
#, no-wrap
msgid "B<persistent-path>=I<PATH>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:99
+#: en/live-boot.7:87
msgid ""
"live-boot will look for persistency files in the root directory of a "
"partition, with this parameter, the path can be configured so that you can "
@@ -594,26 +517,26 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:99
+#: en/live-boot.7:87
#, no-wrap
msgid "{B<preseed/file>|B<file>}=I<FILE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:101
+#: en/live-boot.7:89
msgid ""
"A path to a file present on the rootfs could be used to preseed debconf "
"database."
msgstr ""
#. type: IP
-#: en/live-boot.7:101
+#: en/live-boot.7:89
#, no-wrap
msgid "B<package/question>=I<VALUE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:103
+#: en/live-boot.7:91
msgid ""
"All debian installed packages could be preseeded from command-line that way, "
"beware of blanks spaces, they will interfere with parsing, use a preseed "
@@ -621,26 +544,26 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:103
+#: en/live-boot.7:91
#, no-wrap
msgid "B<quickreboot>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:105
+#: en/live-boot.7:93
msgid ""
"This option causes live-boot to reboot without attempting to eject the media "
"and without asking the user to remove the boot media."
msgstr ""
#. type: IP
-#: en/live-boot.7:105
+#: en/live-boot.7:93
#, no-wrap
msgid "B<showmounts>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:107
+#: en/live-boot.7:95
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
"(mostly compressed) on \"/live\". This is not enabled by default because "
@@ -649,51 +572,38 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:107
+#: en/live-boot.7:95
#, no-wrap
msgid "B<silent>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:109
+#: en/live-boot.7:97
msgid ""
"If you boot with the normal quiet parameter, live-boot hides most messages "
"of its own. When adding silent, it hides all."
msgstr ""
#. type: IP
-#: en/live-boot.7:109
+#: en/live-boot.7:97
#, no-wrap
msgid "B<textonly>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:111
+#: en/live-boot.7:99
msgid ""
"Start up to text-mode shell prompts, disabling the graphical user interface."
msgstr ""
#. type: IP
-#: en/live-boot.7:111
-#, no-wrap
-msgid "B<timezone>=I<TIMEZONE>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:113
-msgid ""
-"By default, timezone is set to UTC. Using the timezone parameter, you can "
-"set it to your local zone, e.g. Europe/Zurich."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:113
+#: en/live-boot.7:99
#, no-wrap
msgid "B<todisk>=I<DEVICE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:115
+#: en/live-boot.7:101
msgid ""
"Adding this parameter, live-boot will try to copy the entire read-only media "
"to the specified device before mounting the root filesystem. It probably "
@@ -703,13 +613,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:115
+#: en/live-boot.7:101
#, no-wrap
msgid "B<toram>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:117
+#: en/live-boot.7:103
msgid ""
"Adding this parameter, live-boot will try to copy the whole read-only media "
"to the computer's RAM before mounting the root filesystem. This could need a "
@@ -717,84 +627,71 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:117
+#: en/live-boot.7:103
#, no-wrap
msgid "B<union>=aufs|unionfs"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:119
+#: en/live-boot.7:105
msgid ""
"By default, live-boot uses aufs. With this parameter, you can switch to "
"unionfs."
msgstr ""
#. type: IP
-#: en/live-boot.7:119
-#, no-wrap
-msgid "B<utc>=yes|no"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:121
-msgid ""
-"By default, Debian systems do assume that the hardware clock is set to UTC. "
-"You can change or explicitly set it with this parameter."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:121
+#: en/live-boot.7:105
#, no-wrap
msgid "B<xdebconf>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:123
+#: en/live-boot.7:107
msgid ""
"Uses xdebconfigurator, if present on the rootfs, to configure X instead of "
"the standard procedure (experimental)."
msgstr ""
#. type: IP
-#: en/live-boot.7:123
+#: en/live-boot.7:107
#, no-wrap
msgid "B<xvideomode>=I<RESOLUTION>"
msgstr ""
#. FIXME
#. type: Plain text
-#: en/live-boot.7:126
+#: en/live-boot.7:110
msgid "Doesn't do xorg autodetection, but enforces a given resolution."
msgstr ""
#. FIXME
#. type: SH
-#: en/live-boot.7:128
+#: en/live-boot.7:112
#, no-wrap
msgid "FILES (old)"
msgstr ""
#. type: IP
-#: en/live-boot.7:129 en/live-snapshot.1:43
+#: en/live-boot.7:113 en/live-snapshot.1:43
#, no-wrap
msgid "B</etc/live.conf>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
msgid ""
"Some variables can be configured via this config file (inside the live "
"system)."
msgstr ""
#. type: IP
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
#, no-wrap
msgid "B<live/filesystem.module>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
msgid ""
"This optional file (inside the live media) contains a list of white-space or "
"carriage-return-separated file names corresponding to disk images in the \"/"
@@ -807,13 +704,13 @@ msgid ""
msgstr ""
#. type: IP
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
#, no-wrap
msgid "B</etc/live-persistence.binds>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:135 en/live-snapshot.1:49
+#: en/live-boot.7:119 en/live-snapshot.1:49
msgid ""
"This optional file (which resides in the rootfs system, not in the live "
"media) is used as a list of directories which not need be persistent: ie. "
@@ -822,7 +719,7 @@ msgid ""
msgstr ""
#. type: Plain text
-#: en/live-boot.7:138 en/live-snapshot.1:51
+#: en/live-boot.7:122 en/live-snapshot.1:51
msgid ""
"This saves expensive writes and speeds up operations on volatile data such "
"as web caches and temporary files (like e.g. /tmp and .mozilla) which are "
@@ -831,64 +728,64 @@ msgid ""
msgstr ""
#. type: SH
-#: en/live-boot.7:139 en/live-snapshot.1:42
+#: en/live-boot.7:123 en/live-snapshot.1:42
#, no-wrap
msgid "FILES"
msgstr ""
#. type: IP
-#: en/live-boot.7:140
+#: en/live-boot.7:124
#, no-wrap
msgid "B</etc/live/boot.conf>"
msgstr ""
#. type: IP
-#: en/live-boot.7:141
+#: en/live-boot.7:125
#, no-wrap
msgid "B</etc/live/boot.conf.d/>"
msgstr ""
#. type: IP
-#: en/live-boot.7:142
+#: en/live-boot.7:126
#, no-wrap
msgid "B<live/boot.conf>"
msgstr ""
#. type: IP
-#: en/live-boot.7:143
+#: en/live-boot.7:127
#, no-wrap
msgid "B<live/boot.conf.d/>"
msgstr ""
#. type: SH
-#: en/live-boot.7:145 en/live-snapshot.1:52
+#: en/live-boot.7:129 en/live-snapshot.1:52
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:147
+#: en/live-boot.7:131
msgid "I<live-snapshot>(1)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:149 en/live-snapshot.1:56
+#: en/live-boot.7:133 en/live-snapshot.1:56
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:151 en/live-snapshot.1:58
+#: en/live-boot.7:135 en/live-snapshot.1:58
msgid "I<live-helper>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:152 en/live-snapshot.1:59
+#: en/live-boot.7:136 en/live-snapshot.1:59
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:154 en/live-snapshot.1:61
+#: en/live-boot.7:138 en/live-snapshot.1:61
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
@@ -896,13 +793,13 @@ msgid ""
msgstr ""
#. type: SH
-#: en/live-boot.7:155 en/live-snapshot.1:62
+#: en/live-boot.7:139 en/live-snapshot.1:62
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:157 en/live-snapshot.1:64
+#: en/live-boot.7:141 en/live-snapshot.1:64
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
@@ -911,13 +808,13 @@ msgid ""
msgstr ""
#. type: SH
-#: en/live-boot.7:158 en/live-snapshot.1:65
+#: en/live-boot.7:142 en/live-snapshot.1:65
#, no-wrap
msgid "AUTHOR"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:159 en/live-snapshot.1:66
+#: en/live-boot.7:143 en/live-snapshot.1:66
msgid ""
"live-boot was written by Daniel Baumann E<lt>I<daniel at debian.org>E<gt> for "
"the Debian project."
--
live-boot
More information about the debian-live-changes
mailing list