[Debian-ppc64-devel] Debian running on a pSeries 6E4 - almost
Roberto Suarez Soto
robe@allenta.com
Thu, 2 Jun 2005 16:01:38 +0200
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Jun/02, Sven Luther wrote:
> > > Also, i would appreciate if you could test the kernel i posted
> > > (http://people.debian.org/~luther/ppc64), and tell me how it went, i
> > > guess it will fail, but it is nice to have as much reports as possible,
> > > together with a working .config file to compare against.
You guessed wrong: it works :-) (in the 5 minutes of uptime I've had
with it, at least)
robe@talat:~$ uname -a
Linux talat 2.6.11-pseries #1 SMP Sat May 28 12:08:11 UTC 2005 ppc64 GNU/Linux
I'm attaching the dmesg of the system just booted. If you need any
other info or want me to do any other test, just ask :-)
--
Roberto Suarez Soto Allenta Consulting
robe@allenta.com www.allenta.com
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-2.6.11-ppc64-20050602.txt"
Content-Transfer-Encoding: quoted-printable
Found initrd at 0xc000000004000000:0xc000000004223000
firmware_features =3D 0x0
Starting Linux PPC64 2.6.11-pseries
-----------------------------------------------------
ppc64_pft_size =3D 0x1a
ppc64_debug_switch =3D 0x0
ppc64_interrupt_controller =3D 0x2
systemcfg =3D 0xc000000000005000
systemcfg->platform =3D 0x100
systemcfg->processorCount =3D 0x2
systemcfg->physicalMemorySize =3D 0x100000000
ppc64_caches.dcache_line_size =3D 0x80
ppc64_caches.icache_line_size =3D 0x80
htab_address =3D 0xc0000000f8000000
htab_hash_mask =3D 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.11-pseries (sven@pegasos2) (gcc version 3.4.4 (Debian 3.4=
=2E4-0ubuntu3)) #1 SMP Sat May 28 12:08:11 UTC 2005
[boot]0012 Setup Arch
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 81920 bytes
Using default idle loop
Top of RAM: 0x100000000, Total RAM: 0x100000000
Memory hole size: 0MB
On node 0 totalpages: 1048576
DMA zone: 1048576 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: root=3D/dev/sda2 ro ramdisk_size=3D8192=20
[boot]0020 XICS Init
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency =3D 150.099658 MHz
time_init: processor frequency =3D 1200.000000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 4022784k/4194304k available (2700k kernel code, 171136k reserved, 1=
256k data, 260k bss, 212k init)
Calibrating delay loop... 299.00 BogoMIPS (lpj=3D149504)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Processor 1 found.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
checking if image is initramfs...it isn't (bad gzip magic numbers); looks l=
ike an initrd
Freeing initrd memory: 2188k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Using INTC for W82c105 IDE controller.
IOMMU table initialized, virtual merging disabled
mapping IO 3fd30000000 -> e000000000000000, size: 100000
mapping IO 3fd40000000 -> e000000000100000, size: 100000
mapping IO 3fd50000000 -> e000000000200000, size: 100000
ISA bridge at 0000:00:03.0
PCI: Probing PCI hardware done
i/pSeries Real Time Clock Driver v1.1
RTAS daemon started
RTAS: event: 38, Type: Internal Device Failure, Severity: 2
audit: initializing netlink socket (disabled)
audit(1117720614.279:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
matroxfb: Matrox G450 detected
matroxfb: 640x480x8bpp (virtual: 640x26214)
matroxfb: framebuffer at 0x3FDCC000000, mapped to 0xe000000080007000, size =
16777216
Console: switching to colour frame buffer device 80x30
fb0: MATROX frame buffer device
matroxfb_crtc2: secondary head of fb0 was registered as fb1
Using unsupported 640x480 MTRX,G450 at ec000000, depth=3D8, pitch=3D640
fb2: Open Firmware frame buffer device on /pci@400000000111/pci@2,6/pci@1/d=
isplay@0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A
ttyS2 at I/O 0x898 (irq =3D 10) is a 16550A
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D=
xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 1048576 (order: 12, 16777216 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2188KiB [1 disk] into ram disk... |=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 212k freed
NET: Registered protocol family 1
SCSI subsystem initialized
PCI: Enabling device: (0000:41:01.0), cmd 143
sym0: <1010-66> rev 0x1 at pci 0000:41:01.0 irq 103
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18n
sym0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:8:0: tagged command queuing enabled, command queue depth 16.
target0:0:8: Beginning Domain Validation
sym0:8: asynchronous.
sym0:8: wide asynchronous.
sym0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:8: Ending Domain Validation
Vendor: IBM Model: IC35L018UCD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
target0:0:9: Beginning Domain Validation
sym0:9: wide asynchronous.
sym0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:9: Ending Domain Validation
sym0:11: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: ST336753LC Rev: C517
Type: Direct-Access ANSI SCSI revision: 03
sym0:11:0: tagged command queuing enabled, command queue depth 16.
target0:0:11: Beginning Domain Validation
sym0:11: asynchronous.
sym0:11: wide asynchronous.
sym0:11: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:11: Ending Domain Validation
Vendor: IBM Model: HSBPD4E PU3SCSI Rev: 0016
Type: Enclosure ANSI SCSI revision: 02
target0:0:15: Beginning Domain Validation
target0:0:15: Ending Domain Validation
PCI: Enabling device: (0000:41:01.1), cmd 143
sym1: <1010-66> rev 0x1 at pci 0000:41:01.1 irq 104
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18n
PCI: Enabling device: (0001:21:01.0), cmd 143
sym2: <875> rev 0x3 at pci 0001:21:01.0 irq 117
sym2: No NVRAM, ID 7, Fast-20, SE, parity checking
sym2: SCSI BUS has been reset.
scsi2 : sym-2.1.18n
Vendor: IBM Model: DVRM00203 !K Rev: A150
Type: CD-ROM ANSI SCSI revision: 02
target2:0:1: Beginning Domain Validation
target2:0:1: Domain Validation skipping write tests
sym2:1: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 16)
target2:0:1: Ending Domain Validation
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
PCI: Enabling device: (0000:21:01.0), cmd 143
e100: eth0: e100_probe: addr 0x3fd88030000, irq 101, MAC addr 00:02:55:4F:9=
E:A1
PCI: Enabling device: (0002:21:01.0), cmd 143
e100: eth1: e100_probe: addr 0x3fde8030000, irq 133, MAC addr 00:02:55:4F:9=
E:A0
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target8/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 8, lun 0
SCSI device sdb: 35548320 512-byte hdwr sectors (18201 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 35548320 512-byte hdwr sectors (18201 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target9/lun0: p1 p2
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host0/bus0/target11/lun0: p1
Attached scsi disk sdc at scsi0, channel 0, id 11, lun 0
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepr=
o100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <s=
aw@saw.sw.com.sg> and others
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on sda2, internal journal
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Raw Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
W82C105: IDE controller at PCI slot 0000:00:03.1
PCI: Enabling device: (0000:00:03.1), cmd 141
W82C105: chipset revision 5
W82C105: 100% native mode on irq 102
ide0: BM-DMA at 0xf040-0xf047, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf048-0xf04f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
NET: Registered protocol family 17
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0000000003f6c48(lo)
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
--d6Gm4EdcadzBjdND--