[Debian-ppc64-devel] Dmesg of OpenPower 720 Express with kernel
2.6.12-1-powerpc64
Roberto Suarez Soto
robe at allenta.com
Wed Sep 14 13:17:10 UTC 2005
Hi,
Sven, the kernel 2.6.12-1-powerpc64 booted flawlessly. I'm
attaching the dmesg with this message. BTW, one question: why are the
packages of these kernels named "linux-image-*" instead of the common
"kernel-image-*"?
The next checkpoint is checking the d-i stuff, but that'll take me
a bit longer :-)
--
Roberto Suarez Soto Allenta Consulting
robe at allenta.com www.allenta.com
-------------- next part --------------
Found initrd at 0xc000000002200000:0xc00000000241d000
firmware_features = 0x1ffd5f
Partition configured for 4 cpus.
Starting Linux PPC64 2.6.12-1-powerpc64
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_debug_switch = 0x0
ppc64_interrupt_controller = 0x2
systemcfg = 0xc000000000360000
systemcfg->platform = 0x101
systemcfg->processorCount = 0x4
systemcfg->physicalMemorySize = 0xef000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.12-1-powerpc64 (buildd at voltaire) (gcc version 4.0.2 20050821 (prerelease) (Debian 4.0.1-6)) #1 SMP Wed Sep 7 02:51:04 UTC 2005
[boot]0012 Setup Arch
Node 0 Memory: 0x0-0xef000000
Syscall map setup, 242 32 bits and 220 64 bits syscalls
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using dedicated idle loop
On node 0 totalpages: 978944
DMA zone: 978944 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro ramdisk_size=8192
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 188.047000 MHz
time_init: processor frequency = 1504.376000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 3838200k/3915776k available (2868k kernel code, 76888k reserved, 1340k data, 269k bss, 236k init)
Calibrating delay loop... 374.78 BogoMIPS (lpj=187392)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Processor 1 found.
Processor 2 found.
Processor 3 found.
Brought up 4 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
domain 1: span 0000000f
groups: 00000003 0000000c
domain 2: span 0000000f
groups: 0000000f
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
domain 1: span 0000000f
groups: 00000003 0000000c
domain 2: span 0000000f
groups: 0000000f
CPU2 attaching sched-domain:
domain 0: span 0000000c
groups: 00000004 00000008
domain 1: span 0000000f
groups: 0000000c 00000003
domain 2: span 0000000f
groups: 0000000f
CPU3 attaching sched-domain:
domain 0: span 0000000c
groups: 00000008 00000004
domain 1: span 0000000f
groups: 0000000c 00000003
domain 2: span 0000000f
groups: 0000000f
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2164k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging enabled
mapping IO 3fe00200000 -> e000000000000000, size: 100000
mapping IO 3fe00700000 -> e000000000100000, size: 100000
PCI: Probing PCI hardware done
i/pSeries Real Time Clock Driver v1.1
probe_bus_pseries: processing c0000000eeff78a0
probe_bus_pseries: processing c0000000eeff7a88
RTAS daemon started
probe_bus_pseries: processing c0000000eeff7c70
probe_bus_pseries: processing c0000000eeff7dd8
probe_bus_pseries: processing c0000000eeff7f60
RTAS: event: 14, Type: Dump Notification Event, Severity: 2
audit: initializing netlink socket (disabled)
audit(1126709192.088:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
matroxfb: probe of 0000:d9:00.0 failed with error -1
Using unsupported 640x480 display at 40080000000, depth=8, pitch=640
Console: switching to colour frame buffer device 80x30
fb0: Open Firmware frame buffer device on /pci at 800000020000002/pci at 2,6/pci at 1/display at 0
vio_register_driver: driver hvc_console registering
HVSI: registered 2 devices
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh at kernel.crashing.org>)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2164KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 236k freed
NET: Registered protocol family 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:c8:01.0: NEC Corporation USB
ohci_hcd 0000:c8:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:c8:01.0: irq 133, io mem 0x400b8001000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: over-current change on port 1
ohci_hcd 0000:c8:01.1: NEC Corporation USB (#2)
ohci_hcd 0000:c8:01.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:c8:01.1: irq 133, io mem 0x400b8000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device: (0000:c8:01.2), cmd 142
ehci_hcd 0000:c8:01.2: NEC Corporation USB 2.0
ehci_hcd 0000:c8:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:c8:01.2: irq 133, io mem 0x400b8002000
ehci_hcd 0000:c8:01.2: park 0
ehci_hcd 0000:c8:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Enabling device: (0001:c0:01.0), cmd 143
e100: eth0: e100_probe: addr 0x401e8030000, irq 163, MAC addr 00:0D:60:0B:40:67
PCI: Enabling device: (0001:d8:01.0), cmd 143
e100: eth1: e100_probe: addr 0x401c0030000, irq 169, MAC addr 00:0D:60:0B:40:6A
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
PCI: Enabling device: (0001:c8:01.0), cmd 143
usb 2-1: new low speed USB device using ohci_hcd and address 3
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Enabling device: (0001:c8:01.1), cmd 143
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
SCSI subsystem initialized
ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21, 2005)
ipr 0000:d0:01.0: Found IOA with IRQ: 135
ipr 0000:d0:01.0: Starting IOA initialization sequence.
ipr 0000:d0:01.0: Adapter firmware version: 03090061
ipr 0000:d0:01.0: IOA initialized.
scsi0 : IBM 5703 Storage Adapter
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: VSBPD4E2 U4SCSI Rev: 5105
Type: Enclosure ANSI SCSI revision: 02
scsi: unknown device type 31
Vendor: IBM Model: 5703001 Rev: 0150
Type: Unknown ANSI SCSI revision: 00
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A0057
ipr 0001:d0:01.0: IOA initialized.
scsi1 : IBM 570B Storage Adapter
Vendor: IBM Model: DDS Gen5 Rev: V314
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770
Type: Enclosure ANSI SCSI revision: 02
scsi: unknown device type 31
Vendor: IBM Model: 570B001 Rev: 0150
Type: Unknown ANSI SCSI revision: 00
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target5/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 5, lun 0
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target8/lun0:
Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host1/bus0/target5/lun0:
Attached scsi disk sdc at scsi1, channel 0, id 5, lun 0
SCSI device sdd: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdd: drive cache: write through
SCSI device sdd: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdd: drive cache: write through
/dev/scsi/host1/bus0/target8/lun0:
Attached scsi disk sdd at scsi1, channel 0, id 8, lun 0
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw at saw.sw.com.sg> and others
usbcore: registered new driver hiddev
input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:c8:01.1-1
input,hiddev0: USB HID v1.10 Mouse [NOVATEK USB Keyboard] on usb-0000:c8:01.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ts: Compaq touchscreen protocol output
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3905528k swap on /dev/sda3. Priority:-1 extents:1
EXT3 FS on sda2, internal journal
PDC20275: IDE controller at PCI slot 0000:cc:01.0
PCI: Enabling device: (0000:cc:01.0), cmd 3
PDC20275: chipset revision 1
PDC20275: 100% native mode on irq 134
ide2: BM-DMA at 0xeec00-0xeec07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xeec08-0xeec0f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: IBM DROM00205, ATAPI CD/DVD-ROM drive
ide2 at 0xee400-0xee407,0xedc02 on irq 134
Probing IDE interface ide3...
e1000: eth2: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c000000000436bc8(lo)
IPv6 over IPv4 tunneling driver
eth2: no IPv6 routers present
RTAS: event: 15, Type: Dump Notification Event, Severity: 2
e1000: eth2: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
eth2: no IPv6 routers present
More information about the Debian-ppc64-devel
mailing list