[SCM] Gerris Flow Solver branch, upstream, updated. b3aa46814a06c9cb2912790b23916ffb44f1f203

Stephane Popinet popinet at users.sf.net
Fri May 15 02:55:14 UTC 2009


The following commit has been merged in the upstream branch:
commit 05a46f9523cd2794a0cbf9f4678a3e5e0dacc112
Author: Stephane Popinet <popinet at users.sf.net>
Date:   Wed Apr 23 07:30:46 2008 +1000

    Use dolt instead of standard libtool
    
    darcs-hash:20080422213046-d4795-46f50d9f03378362a184d1168275458f121d7db9.gz

diff --git a/acinclude.m4 b/acinclude.m4
index 0eb3328..a1c6f69 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -232,3 +232,138 @@ ac_cv_dx_install_path=$DX_PATH
 ])
 DX_PATH=$ac_cv_dx_install_path
 ])
+dnl dolt, a replacement for libtool
+dnl Copyright © 2007-2008 Josh Triplett <josh at freedesktop.org>
+dnl Copying and distribution of this file, with or without modification,
+dnl are permitted in any medium without royalty provided the copyright
+dnl notice and this notice are preserved.
+dnl
+dnl To use dolt, invoke the DOLT macro immediately after the libtool macros.
+dnl Optionally, copy this file into acinclude.m4, to avoid the need to have it
+dnl installed when running autoconf on your project.
+
+AC_DEFUN([DOLT], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+# dolt, a replacement for libtool
+# Josh Triplett <josh at freedesktop.org>
+AC_PATH_PROG(DOLT_BASH, bash)
+AC_MSG_CHECKING([if libtool sucks])
+AC_MSG_RESULT([yup, it does])
+AC_MSG_CHECKING([if dolt supports this host])
+dolt_supported=yes
+if test x$DOLT_BASH = x; then
+    dolt_supported=no
+fi
+if test x$GCC != xyes; then
+    dolt_supported=no
+fi
+case $host in
+i?86-*-linux*|x86_64-*-linux*) ;;
+*) dolt_supported=no ;;
+esac
+if test x$dolt_supported = xno ; then
+    AC_MSG_RESULT([no, falling back to libtool])
+else
+    AC_MSG_RESULT([yes, replacing libtool])
+
+dnl Start writing out doltcompile.
+    cat <<__DOLTCOMPILE__EOF__ >doltcompile
+#!$DOLT_BASH
+__DOLTCOMPILE__EOF__
+    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+args=("$[]@")
+for ((arg=0; arg<${#args@<:@@@:>@}; arg++)) ; do
+    if test x"${args@<:@$arg@:>@}" = x-o ; then
+        objarg=$((arg+1))
+        break
+    fi
+done
+if test x$objarg = x ; then
+    echo 'Error: no -o on compiler command line' 1>&2
+    exit 1
+fi
+lo="${args@<:@$objarg@:>@}"
+obj="${lo%.lo}"
+if test x"$lo" = x"$obj" ; then
+    echo "Error: libtool object file name \"$lo\" does not end in .lo" 1>&2
+    exit 1
+fi
+objbase="${obj##*/}"
+__DOLTCOMPILE__EOF__
+
+dnl Write out shared compilation code.
+    if test x$enable_shared = xyes; then
+        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+libobjdir="${obj%$objbase}.libs"
+if test ! -d "$libobjdir" ; then
+    mkdir "$libobjdir"
+    mkdir_ret=$?
+    if test "$mkdir_ret" -ne 0 && test ! -d "$libobjdir" ; then
+        exit $mkdir_ret
+    fi
+fi
+pic_object="$libobjdir/$objbase.o"
+args@<:@$objarg@:>@="$pic_object"
+"${args@<:@@@:>@}" -fPIC -DPIC
+__DOLTCOMPILE__EOF__
+    fi
+
+dnl Write out static compilation code.
+dnl Avoid duplicate compiler output if also building shared objects.
+    if test x$enable_static = xyes; then
+        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+non_pic_object="$obj.o"
+args@<:@$objarg@:>@="$non_pic_object"
+__DOLTCOMPILE__EOF__
+        if test x$enable_shared = xyes; then
+            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+"${args@<:@@@:>@}" >/dev/null 2>&1
+__DOLTCOMPILE__EOF__
+        else
+            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+"${args@<:@@@:>@}"
+__DOLTCOMPILE__EOF__
+        fi
+    fi
+
+dnl Write out the code to write the .lo file.
+dnl The second line of the .lo file must match "^# Generated by .*libtool"
+    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+{
+echo "# $lo - a libtool object file"
+echo "# Generated by doltcompile, not libtool"
+__DOLTCOMPILE__EOF__
+
+    if test x$enable_shared = xyes; then
+        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+echo "pic_object='$pic_object'"
+__DOLTCOMPILE__EOF__
+    else
+        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+echo pic_object=none
+__DOLTCOMPILE__EOF__
+    fi
+
+    if test x$enable_static = xyes; then
+        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+echo "non_pic_object='$non_pic_object'"
+__DOLTCOMPILE__EOF__
+    else
+        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+echo non_pic_object=none
+__DOLTCOMPILE__EOF__
+    fi
+
+    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
+} > "$lo"
+__DOLTCOMPILE__EOF__
+
+dnl Done writing out doltcompile; substitute it for libtool compilation.
+    chmod +x doltcompile
+    LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
+    AC_SUBST(LTCOMPILE)
+    LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'
+    AC_SUBST(LTCXXCOMPILE)
+fi
+# end dolt
+])
diff --git a/configure.in b/configure.in
index 0d94b11..b052f2f 100644
--- a/configure.in
+++ b/configure.in
@@ -101,6 +101,9 @@ dnl Initialize libtool
 AC_LIBTOOL_WIN32_DLL
 AM_PROG_LIBTOOL
 
+dnl try dolt instead
+DOLT
+
 dnl Enable verbose output from libtool (enable libtool's default)
 AC_ARG_ENABLE(libtool-verbose,
 	      [  --enable-libtool-verbose enable verbose libtool output (default disabled)],

-- 
Gerris Flow Solver



More information about the debian-science-commits mailing list