[SCM] UNNAMED PROJECT branch, master, updated. debian/2.0.5.0-1+090318-3-1-g550a5b7
Scott Howard
showard314 at gmail.com
Sun Jul 18 02:27:13 UTC 2010
The following commit has been merged in the master branch:
commit 550a5b7c3234c2c1aa5c5bfe2bd156fecbf96202
Author: Scott Howard <showard314 at gmail.com>
Date: Sat Jul 17 21:39:24 2010 -0400
Monolithic diff for new debian version, new git repo
* Adopted by deian-science (Closes: #588854)
- Scott Howard added to uploaders
* DM-Upload-Allowed per debian-science policy
* Typos in previous changelog (Closes: #564275, Closes: #572984)
* Policy 3.9.0, no changes
* debian/rules
- use dh overrides instead of makefile targets
- use autoreconf to generate configure and Makefiles (rather than use
upstream's). Depend on automake instead of autotools-dev
- removed calls to dh_installman dh_installmenu and replaced with
debian/qcad.menus debian/qcad.manpages
* Removed debian/README.source's references to quilt, not needed
with quilt source 3.0
* Fixed typo in debian/control (Closes: #579141)
* Removed libqcad0-dev package from control. The package does not include
any library binaries and has no rdepends.
* Added a link from /usr/share/qcad to the help files, and prevent the
qtassistant profiles from being compressed (Closes: #581257)
diff --git a/debian/README.source b/debian/README.source
index 444ee77..d43206e 100644
--- a/debian/README.source
+++ b/debian/README.source
@@ -1,17 +1,5 @@
-qcad for Debian
----------------
-
-<this file describes information about the source package, see Debian policy
-manual section 4.14. You WILL either need to modify or delete this file>
-
-This package uses quilt to manage all modifications to the upstream
-source. Changes are stored in the source package as diffs in
-debian/patches and applied during the build. Please see:
-
- /usr/share/doc/quilt/README.source
-
-for more information on how to apply the patches, modify patches, or
-remove a patch.
-
-
-
+RibbonSoft's community edition of QCad has been
+stalled for years (they are still working on their non-free version).
+A fork called qcad-free was started by Jani Frilander, including many
+bugfixes, polyline support, and additional arc modes.
+http://sites.google.com/site/qcadfree/
diff --git a/debian/changelog b/debian/changelog
index 9835442..781fa38 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,26 @@
+qcad (2.0.5.0-1+090318-4) unstable; urgency=low
+
+ * Adopted by deian-science (Closes: #588854)
+ - Scott Howard added to uploaders
+ * DM-Upload-Allowed per debian-science policy
+ * Typos in previous changelog (Closes: #564275, Closes: #572984)
+ * Policy 3.9.0, no changes
+ * debian/rules
+ - use dh overrides instead of makefile targets
+ - use autoreconf to generate configure and Makefiles (rather than use
+ upstream's). Depend on automake instead of autotools-dev
+ - removed calls to dh_installman dh_installmenu and replaced with
+ debian/qcad.menus debian/qcad.manpages
+ * Removed debian/README.source's references to quilt, not needed
+ with quilt source 3.0
+ * Fixed typo in debian/control (Closes: #579141)
+ * Removed libqcad0-dev package from control. The package does not include
+ any library binaries and has no rdepends.
+ * Added a link from /usr/share/qcad to the help files, and prevent the
+ qtassistant profiles from being compressed (Closes: #581257)
+
+ -- Scott Howard <showard314 at gmail.com> Sat, 17 Jul 2010 20:50:36 -0400
+
qcad (2.0.5.0-1+090318-3) unstable; urgency=low
* Standards-Version updated to 3.8.4
diff --git a/debian/control b/debian/control
index f78e022..bd526a6 100644
--- a/debian/control
+++ b/debian/control
@@ -1,11 +1,16 @@
Source: qcad
Section: graphics
Priority: optional
-Maintainer: Ruben Molina <rmolina at udea.edu.co>
-Build-Depends: debhelper (>= 7), autotools-dev,
+Maintainer: Debian Science Maintainers <debian-science-maintainers at lists.alioth.debian.org>
+Uploaders: Scott Howard <showard314 at gmail.com>, Ruben Molina <rmolina at udea.edu.co>
+Build-Depends: debhelper (>= 7.0.50~), automake,
libqt3-mt-dev, libqt3-headers, qt3-dev-tools, qt3-apps-dev
-Standards-Version: 3.8.4
+Standards-Version: 3.9.0
Homepage: http://www.ribbonsoft.com/qcad.html
+DM-Upload-Allowed: yes
+Vcs-Git: git://git.debian.org/git/debian-science/packages/qcad.git
+Vcs-Browser: http://git.debian.org/?p=debian-science/packages/qcad.git
+
Package: qcad
Architecture: any
@@ -28,7 +33,7 @@ Description: professional CAD system -- shared files
dimensions (2D).
.
This package contains plataform independent files for QCAD, including
- fonts, patterns, and interface trnalations
+ fonts, patterns, and interface translations.
Package: qcad-doc
Section: doc
@@ -40,16 +45,3 @@ Description: professional CAD system -- documentation
.
This package contains a set of tutorial web pages which helps you to
learn and practice QCAD.
-
-Package: libqcad0-dev
-Section: libdevel
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Conflicts: libqcad0
-Replaces: libqcad0
-Description: professional CAD system -- development headers and static libraries
- QCAD is an application for computer aided drafting (CAD) in two
- dimensions (2D).
- .
- This package contains header files and the static libraries of QCAD
- components.
diff --git a/debian/libqcad0-dev.install b/debian/libqcad0-dev.install
deleted file mode 100644
index 3b0c846..0000000
--- a/debian/libqcad0-dev.install
+++ /dev/null
@@ -1,8 +0,0 @@
-./*/src/*.h /usr/include/qcad/
-./*/src/qg_*.h /usr/include/qcad/
-./*/src/qc_*.h /usr/include/qcad/
-./*/src/qc_*.h /usr/include/qcad/
-./*/src/dl_*.h /usr/include/qcad/
-./*/src/rs_*.h /usr/include/qcad/
-./*/src/*/rs_*.h /usr/include/qcad/
-
diff --git a/debian/make_dist.sh b/debian/make_dist.sh
deleted file mode 100644
index 131085e..0000000
--- a/debian/make_dist.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh
-
-dirs="dxflib fparser qcad qcadactions qcadcmd qcadguiqt qcadlib"
-
-for i in $dirs
-do
- cd $i
- make clean
- cd ..
-done
-
-for i in $(find -name '*.qm') ; do rm -rf $i ; done
-for i in $(find -name '*.a') ; do rm -rf $i ; done
-rm */include/*
diff --git a/debian/patches/debian-changes-2.0.5.0-1+090318-3 b/debian/patches/debian-changes-2.0.5.0-1+090318-3
deleted file mode 100644
index b829c46..0000000
--- a/debian/patches/debian-changes-2.0.5.0-1+090318-3
+++ /dev/null
@@ -1,55 +0,0 @@
-Description: Upstream changes introduced in version 2.0.5.0-1+090318-3
- This patch has been created by dpkg-source during the package build.
- Here's the last changelog entry, hopefully it gives details on why
- those changes were made:
- .
- qcad (2.0.5.0-1+090318-3) unstable; urgency=low
- .
- * Standards-Version updated to 3.8.4
- * Restoring relationships (Closes: #559456, #561101).
- * Add Categories to qcad.desktop (Closes: #512600).
- * Fix spelling-error-in-manpage
- * Installing menu file (Close: #564275).
- * Installing file association (Close: #572984).
- .
- The person named in the Author field signed this changelog entry.
-Author: Ruben Molina <rmolina at udea.edu.co>
-Bug-Debian: http://bugs.debian.org/512600
-Bug-Debian: http://bugs.debian.org/559456
-Bug-Debian: http://bugs.debian.org/561101
-
----
-The information above should follow the Patch Tagging Guidelines, please
-checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here
-are templates for supplementary fields that you might want to add:
-
-Origin: <vendor|upstream|other>, <url of original patch>
-Bug: <url in upstream bugtracker>
-Bug-Debian: http://bugs.debian.org/<bugnumber>
-Bug-Ubuntu: https://launchpad.net/bugs/<bugnumber>
-Forwarded: <no|not-needed|url proving that it has been forwarded>
-Reviewed-By: <name and email of someone who approved the patch>
-Last-Update: <YYYY-MM-DD>
-
---- qcad-2.0.5.0-1+090318.orig/dxflib/Makefile
-+++ qcad-2.0.5.0-1+090318/dxflib/Makefile
-@@ -31,7 +31,7 @@ CFLAGS = -I./src -g -O2 -DPACKAGE
- INSTALL = /usr/bin/install -c
- INSTALL_DATA = ${INSTALL} -m 644
- FIND = find
--MAKEDEPEND = makedepend
-+MAKEDEPEND = :
- AR = ar
- ARFLAGS = -rs
-
---- qcad-2.0.5.0-1+090318.orig/fparser/Makefile
-+++ qcad-2.0.5.0-1+090318/fparser/Makefile
-@@ -30,7 +30,7 @@ CFLAGS = -I./src -g -O2 -DPACKAGE
- INSTALL = /usr/bin/install -c
- INSTALL_DATA = ${INSTALL} -m 644
- FIND = find
--MAKEDEPEND = makedepend
-+MAKEDEPEND = :
- AR = ar
- ARFLAGS = -rs
-
diff --git a/debian/patches/series b/debian/patches/series
index 27e0d1d..bca776c 100644
--- a/debian/patches/series
+++ b/debian/patches/series
@@ -5,4 +5,3 @@ bug#370464.patch
define-debian-paths.patch
add-hint-about-qcad-doc.patch
create-about_txt.patch
-debian-changes-2.0.5.0-1+090318-3
diff --git a/debian/qcad.links b/debian/qcad.links
new file mode 100644
index 0000000..64de311
--- /dev/null
+++ b/debian/qcad.links
@@ -0,0 +1 @@
+/usr/share/doc/qcad/html/ /usr/share/qcad/doc
diff --git a/debian/qcad.manpages b/debian/qcad.manpages
new file mode 100644
index 0000000..1da7631
--- /dev/null
+++ b/debian/qcad.manpages
@@ -0,0 +1 @@
+debian/qcad.1
diff --git a/debian/rules b/debian/rules
index 5b4cf18..2413b22 100755
--- a/debian/rules
+++ b/debian/rules
@@ -6,8 +6,12 @@
%:
dh $@
-clean:
- dh clean --before dh_auto_clean
+override_dh_auto_configure:
+ cd dxflib && autoreconf -f -i
+ cd fparser && autoreconf -f -i
+
+override_dh_auto_clean:
+ dh_auto_clean
touch ./dxflib/include/DELETE.ME
# touching because make_dist.sh will fail if there is nothing to delete in */include/*
@@ -17,18 +21,12 @@ clean:
# patch-system-but-direct-changes-in-diff
rm -f qcadguiqt/src/Makefile qcadcmd/src/Makefile qcad/src/Makefile qcadlib/src/Makefile qcadactions/src/Makefile
# configure-generated-file-in-source
- rm -f dxflib/config.log dxflib/config.status fparser/config.log fparser/config.status
+ rm -f dxflib/config.log dxflib/config.status fparser/config.log fparser/config.status fparser/Makefile dxflib/Makefile
# package-contains-empty-directory
[ ! -d qcad/doc/classref/html/en/ ] || rmdir qcad/doc/classref/html/en/
- dh clean --remaining
-build:
- dh build --before dh_auto_build
+override_dh_auto_build:
cd scripts/ && QTDIR=/usr/share/qt3 QMAKESPEC=/usr/share/qt3/mkspecs/linux-g++ PATH=${PATH}:/usr/share/qt3/bin ./build_qcad.sh
- dh build --after dh_auto_build
-binary:
- dh binary --until dh_prep
- dh_installman debian/qcad.1
- dh_installmenu debian/qcad.menu
- dh binary --remaining
+override_dh_compress:
+ dh_compress -X.adp
diff --git a/debian/source.lintian-overrides b/debian/source.lintian-overrides
index fe251d2..4410b84 100644
--- a/debian/source.lintian-overrides
+++ b/debian/source.lintian-overrides
@@ -1,4 +1,4 @@
-# Files are cleaned in debian/rules
+# Files are cleaned in debian/rules and rebuilt with autoreconf
qcad source: configure-generated-file-in-source dxflib/config.log
qcad source: configure-generated-file-in-source dxflib/config.status
qcad source: configure-generated-file-in-source fparser/config.log
diff --git a/dxflib/Makefile b/dxflib/Makefile
deleted file mode 100644
index 43367cc..0000000
--- a/dxflib/Makefile
+++ /dev/null
@@ -1,142 +0,0 @@
-#
-#
-# Makefile for dxflib
-#
-#
-VERSION = 2.0.4.8
-
-#
-# dxflib installation directories
-#
-LIBDIR = /usr/local/lib
-INCDIR = /usr/local/include/dxflib
-
-#PREFIX ?= /usr
-
-#LIBDIR = $(DESTDIR)$(PREFIX)/lib
-#INCDIR = $(DESTDIR)$(PREFIX)/include/dxflib
-
-
-#LIBDIR = $(HOME)/local/lib
-#INCDIR = $(HOME)/local/include/dxflib
-
-#
-#------------------------ do not edit ------------------------
-#
-SHELL = /bin/sh
-
-CC = gcc
-CXX = gcc
-CFLAGS = -I./src -g -O2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DLINUX=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-FIND = find
-MAKEDEPEND = makedepend
-AR = ar
-ARFLAGS = -rs
-
-BASE_DIR = ./src
-
-BASE_SRC = \
- $(BASE_DIR)/dl_dxf.cpp \
- $(BASE_DIR)/dl_writer_ascii.cpp
-
-BASE_INS = \
- $(BASE_DIR)/dl_attributes.h \
- $(BASE_DIR)/dl_codes.h \
- $(BASE_DIR)/dl_creationadapter.h \
- $(BASE_DIR)/dl_creationinterface.h \
- $(BASE_DIR)/dl_dxf.h \
- $(BASE_DIR)/dl_entities.h \
- $(BASE_DIR)/dl_exception.h \
- $(BASE_DIR)/dl_extrusion.h \
- $(BASE_DIR)/dl_writer.h \
- $(BASE_DIR)/dl_writer_ascii.h
-
-SRC = $(BASE_SRC)
-OBJ = $(SRC:.cpp=.o)
-
-INS = $(BASE_INS)
-
-.cpp.o:
- $(CXX) $(CFLAGS) -c $< -o $@
-
-
-all: prepare ./lib/libdxf.a
-
-prepare:
- test -d ./include || mkdir -p ./include
- -( cd ./include; rm -f *.h; \
- for hf in `find ../src -name '*.h'`; do \
- if [ "x$$OS" = "xWindows_NT" ]; then \
- cp "$$hf" .; \
- else \
- ln -s "$$hf" 2> /dev/null; \
- fi \
- done )
-
-shared: ./lib/libdxf.so.$(VERSION)
- @echo
-
-./lib/libdxf.a: $(OBJ)
- test -d ./lib || mkdir ./lib
- $(AR) $(ARFLAGS) ./lib/libdxf.a $(OBJ)
-
-./lib/libdxf.so.$(VERSION): $(OBJ)
- test -d ./lib || mkdir ./lib
- $(CC) -p -shared -o ./lib/libdxf.so.$(VERSION) $(OBJ) -lc -lm
- -(cd ./lib ; ln -s libdxf.so.$(VERSION) libdxf.so)
-
-install: ./lib/libdxf.a
- test -d $(LIBDIR) || mkdir -p $(LIBDIR)
- test -d $(INCDIR) || mkdir -p $(INCDIR)
- $(INSTALL_DATA) ./lib/libdxf.a $(LIBDIR)
- #-(ln -s $(LIBDIR)/libdxf.a $(LIBDIR)/libdxf.a)
- for IFILE in $(INS); do \
- $(INSTALL_DATA) $$IFILE $(INCDIR); \
- done
-
-install-shared: ./lib/libdxf.so.$(VERSION)
- test -d $(LIBDIR) || mkdir -p $(LIBDIR)
- test -d $(INCDIR) || mkdir -p $(INCDIR)
- #$(INSTALL_DATA) ./lib/libdxf.so.$(VERSION) $(LIBDIR)
- -(ln -s $(LIBDIR)/libdxf.so.$(VERSION) $(LIBDIR)/libdxf.so)
- for IFILE in $(INS); do \
- $(INSTALL_DATA) $$IFILE $(INCDIR); \
- done
-
-clean:
- -(cd ./test ; make clean)
- -rm -f $(OBJ)
- -rm -f ./lib/lib* Makefile.bak
- -rm -f ./include/dxflib/*.h
- -$(FIND) . -name "*~" -exec rm -f {} \;
- -rm -f ./lib/libdxf.a
-
-distclean: clean
- -rm -f Makefile configure
-
-testing: ./lib/libdxf.a
- (cd ./test ; make)
-
-docu:
- -(doxygen ./doxygen.cfg)
-
-dist: clean docu
- #-rm -r ./doc/classref/html/en/*
- -rm -r ./distribution/dxflib/*
- test -d ./distribution/dxflib || mkdir -p ./distribution/dxflib
- mkdir -p ./distribution/dxflib/doc
- -(cp -r ./src ./test ./distribution/dxflib/)
- -(cp -r ./doc/classref ./distribution/dxflib/doc/)
- -(cp * ./distribution/dxflib/)
- -(cd ./distribution/dxflib; rm config.log config.cache reinstall*; mkdir lib include)
- -(cd ./distribution; tar fvcz dxflib-$(VERSION).tar.gz dxflib)
-
-depend:
- $(MAKEDEPEND) -- $(CFLAGS) -- $(SRC)
- @echo
- @echo "Run 'make' to build dxflib library."
- @echo
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
diff --git a/dxflib/config.log b/dxflib/config.log
deleted file mode 100644
index e04d312..0000000
--- a/dxflib/config.log
+++ /dev/null
@@ -1,439 +0,0 @@
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by configure, which was
-generated by GNU Autoconf 2.57. Invocation command line was
-
- $ ./configure
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = masiina
-uname -m = x86_64
-uname -r = 2.6.27.7-9-default
-uname -s = Linux
-uname -v = #1 SMP 2008-12-04 18:10:04 +0100
-
-/usr/bin/uname -p = unknown
-/bin/uname -X = unknown
-
-/bin/arch = x86_64
-/usr/bin/arch -k = unknown
-/usr/convex/getsysinfo = unknown
-hostinfo = unknown
-/bin/machine = unknown
-/usr/bin/oslevel = unknown
-/bin/universe = unknown
-
-PATH: /usr/lib64/qt3/bin
-PATH: /home/frilande/bin
-PATH: /home/frilande/bin
-PATH: /usr/local/bin
-PATH: /usr/bin
-PATH: /bin
-PATH: /usr/bin/X11
-PATH: /usr/X11R6/bin
-PATH: /usr/games
-PATH: /opt/kde3/bin
-PATH: /usr/lib64/jvm/jre/bin
-PATH: /usr/lib/mit/bin
-PATH: /usr/lib/mit/sbin
-PATH: .
-PATH: /usr/lib/qt3/bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1304: checking build system type
-configure:1322: result: x86_64-unknown-linux-gnu
-configure:1330: checking host system type
-configure:1344: result: x86_64-unknown-linux-gnu
-configure:1416: checking for gcc
-configure:1432: found /usr/bin/gcc
-configure:1442: result: gcc
-configure:1686: checking for C compiler version
-configure:1689: gcc --version </dev/null >&5
-gcc (SUSE Linux) 4.3.2 [gcc-4_3-branch revision 141291]
-Copyright (C) 2008 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:1692: $? = 0
-configure:1694: gcc -v </dev/null >&5
-Using built-in specs.
-Target: x86_64-suse-linux
-Configured with: ../configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib64 --libexecdir=/usr/lib64 --enable-languages=c,c++,objc,fortran,obj-c++,java,ada --enable-checking=release --with-gxx-include-dir=/usr/include/c++/4.3 --enable-ssp --disable-libssp --with-bugurl=http://bugs.opensuse.org/ --with-pkgversion='SUSE Linux' --disable-libgcj --disable-libmudflap --with-slibdir=/lib64 --with-system-zlib --enable-__cxa_atexit --enable-libstdcxx-allocator=new --disable-libstdcxx-pch --enable-version-specific-runtime-libs --program-suffix=-4.3 --enable-linux-futex --without-system-libunwind --with-cpu=generic --build=x86_64-suse-linux
-Thread model: posix
-gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux)
-configure:1697: $? = 0
-configure:1699: gcc -V </dev/null >&5
-gcc: '-V' option must have argument
-configure:1702: $? = 1
-configure:1726: checking for C compiler default output
-configure:1729: gcc conftest.c >&5
-configure:1732: $? = 0
-configure:1778: result: a.out
-configure:1783: checking whether the C compiler works
-configure:1789: ./a.out
-configure:1792: $? = 0
-configure:1809: result: yes
-configure:1816: checking whether we are cross compiling
-configure:1818: result: no
-configure:1821: checking for suffix of executables
-configure:1823: gcc -o conftest conftest.c >&5
-configure:1826: $? = 0
-configure:1851: result:
-configure:1857: checking for suffix of object files
-configure:1879: gcc -c conftest.c >&5
-configure:1882: $? = 0
-configure:1904: result: o
-configure:1908: checking whether we are using the GNU C compiler
-configure:1933: gcc -c conftest.c >&5
-configure:1936: $? = 0
-configure:1939: test -s conftest.o
-configure:1942: $? = 0
-configure:1955: result: yes
-configure:1961: checking whether gcc accepts -g
-configure:1983: gcc -c -g conftest.c >&5
-configure:1986: $? = 0
-configure:1989: test -s conftest.o
-configure:1992: $? = 0
-configure:2003: result: yes
-configure:2020: checking for gcc option to accept ANSI C
-configure:2081: gcc -c -g -O2 conftest.c >&5
-configure:2084: $? = 0
-configure:2087: test -s conftest.o
-configure:2090: $? = 0
-configure:2108: result: none needed
-configure:2126: gcc -c -g -O2 conftest.c >&5
-conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
-configure:2129: $? = 1
-configure: failed program was:
-| #ifndef __cplusplus
-| choke me
-| #endif
-configure:2243: checking how to run the C preprocessor
-configure:2279: gcc -E conftest.c
-configure:2285: $? = 0
-configure:2317: gcc -E conftest.c
-configure:2317:28: error: ac_nonexistent.h: No such file or directory
-configure:2323: $? = 1
-configure: failed program was:
-| #line 2308 "configure"
-| /* confdefs.h. */
-|
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define LINUX 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:2361: result: gcc -E
-configure:2386: gcc -E conftest.c
-configure:2392: $? = 0
-configure:2424: gcc -E conftest.c
-configure:2424:28: error: ac_nonexistent.h: No such file or directory
-configure:2430: $? = 1
-configure: failed program was:
-| #line 2415 "configure"
-| /* confdefs.h. */
-|
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define LINUX 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:2484: checking for a BSD-compatible install
-configure:2538: result: /usr/bin/install -c
-configure:2551: checking for find
-configure:2567: found /usr/bin/find
-configure:2578: result: find
-configure:2587: checking for makedepend
-configure:2603: found /usr/bin/makedepend
-configure:2614: result: makedepend
-configure:2628: checking for X
-configure:2734: gcc -E conftest.c
-configure:2740: $? = 0
-configure:2848: result: libraries /usr/lib64, headers
-configure:3001: gcc -o conftest -g -O2 conftest.c -L/usr/lib64 -lX11 >&5
-configure:3004: $? = 0
-configure:3007: test -s conftest
-configure:3010: $? = 0
-configure:3147: checking for gethostbyname
-configure:3197: gcc -o conftest -g -O2 conftest.c >&5
-configure:3200: $? = 0
-configure:3203: test -s conftest
-configure:3206: $? = 0
-configure:3217: result: yes
-configure:3348: checking for connect
-configure:3398: gcc -o conftest -g -O2 conftest.c >&5
-configure:3401: $? = 0
-configure:3404: test -s conftest
-configure:3407: $? = 0
-configure:3418: result: yes
-configure:3483: checking for remove
-configure:3533: gcc -o conftest -g -O2 conftest.c >&5
-configure:3536: $? = 0
-configure:3539: test -s conftest
-configure:3542: $? = 0
-configure:3553: result: yes
-configure:3618: checking for shmat
-configure:3668: gcc -o conftest -g -O2 conftest.c >&5
-configure:3671: $? = 0
-configure:3674: test -s conftest
-configure:3677: $? = 0
-configure:3688: result: yes
-configure:3762: checking for IceConnectionNumber in -lICE
-configure:3793: gcc -o conftest -g -O2 -L/usr/lib64 conftest.c -lICE >&5
-configure:3796: $? = 0
-configure:3799: test -s conftest
-configure:3802: $? = 0
-configure:3814: result: yes
-configure:3834: checking for egrep
-configure:3844: result: grep -E
-configure:3849: checking for ANSI C header files
-configure:3875: gcc -c -g -O2 conftest.c >&5
-configure:3878: $? = 0
-configure:3881: test -s conftest.o
-configure:3884: $? = 0
-configure:3976: gcc -o conftest -g -O2 -L/usr/lib64 -L/usr/local/lib conftest.c >&5
-configure: In function 'main':
-configure:3970: warning: incompatible implicit declaration of built-in function 'exit'
-configure:3979: $? = 0
-configure:3981: ./conftest
-configure:3984: $? = 0
-configure:3999: result: yes
-configure:4023: checking for sys/types.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for sys/stat.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for stdlib.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for string.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for memory.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for strings.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for inttypes.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for stdint.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4023: checking for unistd.h
-configure:4040: gcc -c -g -O2 conftest.c >&5
-configure:4043: $? = 0
-configure:4046: test -s conftest.o
-configure:4049: $? = 0
-configure:4060: result: yes
-configure:4086: checking limits.h usability
-configure:4099: gcc -c -g -O2 conftest.c >&5
-configure:4102: $? = 0
-configure:4105: test -s conftest.o
-configure:4108: $? = 0
-configure:4118: result: yes
-configure:4122: checking limits.h presence
-configure:4133: gcc -E conftest.c
-configure:4139: $? = 0
-configure:4158: result: yes
-configure:4194: checking for limits.h
-configure:4201: result: yes
-configure:4347: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by config.status, which was
-generated by GNU Autoconf 2.57. Invocation command line was
-
- CONFIG_FILES =
- CONFIG_HEADERS =
- CONFIG_LINKS =
- CONFIG_COMMANDS =
- $ ./config.status
-
-on masiina
-
-config.status:622: creating Makefile
-config.status:622: creating test/Makefile
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_build=x86_64-unknown-linux-gnu
-ac_cv_build_alias=x86_64-unknown-linux-gnu
-ac_cv_c_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_exeext=
-ac_cv_func_connect=yes
-ac_cv_func_gethostbyname=yes
-ac_cv_func_remove=yes
-ac_cv_func_shmat=yes
-ac_cv_have_x='have_x=yes ac_x_includes= ac_x_libraries=/usr/lib64'
-ac_cv_header_inttypes_h=yes
-ac_cv_header_limits_h=yes
-ac_cv_header_memory_h=yes
-ac_cv_header_stdc=yes
-ac_cv_header_stdint_h=yes
-ac_cv_header_stdlib_h=yes
-ac_cv_header_string_h=yes
-ac_cv_header_strings_h=yes
-ac_cv_header_sys_stat_h=yes
-ac_cv_header_sys_types_h=yes
-ac_cv_header_unistd_h=yes
-ac_cv_host=x86_64-unknown-linux-gnu
-ac_cv_host_alias=x86_64-unknown-linux-gnu
-ac_cv_lib_ICE_IceConnectionNumber=yes
-ac_cv_objext=o
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_CPP='gcc -E'
-ac_cv_prog_FIND=find
-ac_cv_prog_MAKEDEPEND=makedepend
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_cc_g=yes
-ac_cv_prog_cc_stdc=
-ac_cv_prog_egrep='grep -E'
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-CC='gcc'
-CFLAGS='-g -O2 '
-CPP='gcc -E'
-CPPFLAGS=''
-DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DLINUX=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 '
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP='grep -E'
-EXEEXT=''
-FIND='find'
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-LDFLAGS=' -L/usr/lib64 -L/usr/local/lib'
-LIBOBJS=''
-LIBS=''
-LTLIBOBJS=''
-MAKEDEPEND='makedepend'
-OBJEXT='o'
-PACKAGE_BUGREPORT=''
-PACKAGE_NAME=''
-PACKAGE_STRING=''
-PACKAGE_TARNAME=''
-PACKAGE_VERSION=''
-PATH_SEPARATOR=':'
-SHELL='/bin/sh'
-X_CFLAGS=''
-X_EXTRA_LIBS=''
-X_LIBS=' -L/usr/lib64'
-X_PRE_LIBS=' -lSM -lICE'
-ac_ct_CC='gcc'
-bindir='${exec_prefix}/bin'
-build='x86_64-unknown-linux-gnu'
-build_alias=''
-build_cpu='x86_64'
-build_os='linux-gnu'
-build_vendor='unknown'
-datadir='${prefix}/share'
-exec_prefix='${prefix}'
-host='x86_64-unknown-linux-gnu'
-host_alias=''
-host_cpu='x86_64'
-host_os='linux-gnu'
-host_vendor='unknown'
-includedir='${prefix}/include'
-infodir='${prefix}/info'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localstatedir='${prefix}/var'
-mandir='${prefix}/man'
-oldincludedir='/usr/include'
-prefix='/usr/local'
-program_transform_name='s,x,x,'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target_alias=''
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define HAVE_INTTYPES_H 1
-#define HAVE_LIMITS_H 1
-#define HAVE_MEMORY_H 1
-#define HAVE_STDINT_H 1
-#define HAVE_STDLIB_H 1
-#define HAVE_STRINGS_H 1
-#define HAVE_STRING_H 1
-#define HAVE_SYS_STAT_H 1
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_UNISTD_H 1
-#define LINUX 1
-#define PACKAGE_BUGREPORT ""
-#define PACKAGE_NAME ""
-#define PACKAGE_STRING ""
-#define PACKAGE_TARNAME ""
-#define PACKAGE_VERSION ""
-#define STDC_HEADERS 1
-
-configure: exit 0
diff --git a/dxflib/config.status b/dxflib/config.status
deleted file mode 100755
index 3a081ce..0000000
--- a/dxflib/config.status
+++ /dev/null
@@ -1,696 +0,0 @@
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.57. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile test/Makefile"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <bug-autoconf at gnu.org>."
-ac_cs_version="\
-config.status
-configured by ./configure, generated by GNU Autoconf 2.57,
- with options \"\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c"
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
- echo "running /bin/sh ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6
- exec /bin/sh ./configure $ac_configure_extra_args --no-create --no-recursion
-fi
-
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s, at SHELL@,/bin/sh,;t t
-s, at PATH_SEPARATOR@,:,;t t
-s, at PACKAGE_NAME@,,;t t
-s, at PACKAGE_TARNAME@,,;t t
-s, at PACKAGE_VERSION@,,;t t
-s, at PACKAGE_STRING@,,;t t
-s, at PACKAGE_BUGREPORT@,,;t t
-s, at exec_prefix@,${prefix},;t t
-s, at prefix@,/usr/local,;t t
-s, at program_transform_name@,s,x,x,,;t t
-s, at bindir@,${exec_prefix}/bin,;t t
-s, at sbindir@,${exec_prefix}/sbin,;t t
-s, at libexecdir@,${exec_prefix}/libexec,;t t
-s, at datadir@,${prefix}/share,;t t
-s, at sysconfdir@,${prefix}/etc,;t t
-s, at sharedstatedir@,${prefix}/com,;t t
-s, at localstatedir@,${prefix}/var,;t t
-s, at libdir@,${exec_prefix}/lib,;t t
-s, at includedir@,${prefix}/include,;t t
-s, at oldincludedir@,/usr/include,;t t
-s, at infodir@,${prefix}/info,;t t
-s, at mandir@,${prefix}/man,;t t
-s, at build_alias@,,;t t
-s, at host_alias@,,;t t
-s, at target_alias@,,;t t
-s, at DEFS@,-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DLINUX=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 ,;t t
-s, at ECHO_C@,,;t t
-s, at ECHO_N@,-n,;t t
-s, at ECHO_T@,,;t t
-s, at LIBS@,,;t t
-s, at build@,x86_64-unknown-linux-gnu,;t t
-s, at build_cpu@,x86_64,;t t
-s, at build_vendor@,unknown,;t t
-s, at build_os@,linux-gnu,;t t
-s, at host@,x86_64-unknown-linux-gnu,;t t
-s, at host_cpu@,x86_64,;t t
-s, at host_vendor@,unknown,;t t
-s, at host_os@,linux-gnu,;t t
-s, at CC@,gcc,;t t
-s, at CFLAGS@,-g -O2 ,;t t
-s, at LDFLAGS@, -L/usr/lib64 -L/usr/local/lib,;t t
-s, at CPPFLAGS@,,;t t
-s, at ac_ct_CC@,gcc,;t t
-s, at EXEEXT@,,;t t
-s, at OBJEXT@,o,;t t
-s, at CPP@,gcc -E,;t t
-s, at INSTALL_PROGRAM@,${INSTALL},;t t
-s, at INSTALL_SCRIPT@,${INSTALL},;t t
-s, at INSTALL_DATA@,${INSTALL} -m 644,;t t
-s, at FIND@,find,;t t
-s, at MAKEDEPEND@,makedepend,;t t
-s, at X_CFLAGS@,,;t t
-s, at X_PRE_LIBS@, -lSM -lICE,;t t
-s, at X_LIBS@, -L/usr/lib64,;t t
-s, at X_EXTRA_LIBS@,,;t t
-s, at EGREP@,grep -E,;t t
-s, at LIBOBJS@,,;t t
-s, at LTLIBOBJS@,,;t t
-CEOF
-
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo $f;;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo $f
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo $srcdir/$f
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- sed "/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s, at configure_input@,$configure_input,;t t
-s, at srcdir@,$ac_srcdir,;t t
-s, at abs_srcdir@,$ac_abs_srcdir,;t t
-s, at top_srcdir@,$ac_top_srcdir,;t t
-s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s, at builddir@,$ac_builddir,;t t
-s, at abs_builddir@,$ac_abs_builddir,;t t
-s, at top_builddir@,$ac_top_builddir,;t t
-s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
-s, at INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-
-{ (exit 0); exit 0; }
diff --git a/fparser/Makefile b/fparser/Makefile
deleted file mode 100644
index 4cdf0ef..0000000
--- a/fparser/Makefile
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-#
-# Makefile for fparser
-#
-#
-
-#
-# fparser installation directories
-#
-#LIBDIR = /usr/local/lib
-#INCDIR = /usr/local/include/fparser
-VERSION = 2.51
-
-#LIBDIR = $(HOME)/local/lib
-#INCDIR = $(HOME)/local/include/fparser
-
-PREFIX ?= /usr
-
-LIBDIR = $(DESTDIR)/$(PREFIX)/lib
-INCDIR = $(DESTDIR)/$(PREFIX)/include/fparser
-
-#
-#------------------------ do not edit ------------------------
-#
-SHELL = /bin/sh
-
-CC = gcc
-CXX = gcc
-CFLAGS = -I./src -g -O2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DLINUX=1 -DSTDC_HEADERS=1
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-FIND = find
-MAKEDEPEND = makedepend
-AR = ar
-ARFLAGS = -rs
-
-BASE_DIR = ./src
-
-BASE_SRC = \
- $(BASE_DIR)/fparser.cpp
-
-BASE_INS = \
- $(BASE_DIR)/fparser.h
-
-SRC = $(BASE_SRC)
-OBJ = $(SRC:.cpp=.o)
-
-INS = $(BASE_INS)
-
-.cpp.o:
- $(CXX) $(CFLAGS) -c $< -o $@
-
-
-all: prepare ./lib/libfparser.a
-
-prepare:
- test -d ./include || mkdir -p ./include
- -( cd ./include; rm -f *.h; \
- for hf in `find ../src -name '*.h'`; do \
- if [ "x$$OS" = "xWindows_NT" ]; then \
- cp "$$hf" .; \
- else \
- ln -s "$$hf" 2> /dev/null; \
- fi \
- done )
-
-shared: ./lib/libfparser.so.$(VERSION)
- @echo
-
-./lib/libfparser.a: $(OBJ)
- test -d ./lib || mkdir ./lib
- $(AR) $(ARFLAGS) ./lib/libfparser.a $(OBJ)
-
-./lib/libfparser.so.$(VERSION): $(OBJ)
- test -d ./lib || mkdir ./lib
- $(CC) -p -shared -o ./lib/libfparser.so.$(VERSION) $(OBJ) -lc -lm
- -(cd ./lib ; ln -s libfparser.so.$(VERSION) libfparser.so)
-
-install: ./lib/libfparser.a
- test -d $(LIBDIR) || mkdir -p $(LIBDIR)
- test -d $(INCDIR) || mkdir -p $(INCDIR)
- $(INSTALL_DATA) ./lib/libfparser.a $(LIBDIR)
- #-(ln -s $(LIBDIR)/libfparser.a $(LIBDIR)/libfparser.a)
- for IFILE in $(INS); do \
- $(INSTALL_DATA) $$IFILE $(INCDIR); \
- done
-
-install-shared: ./lib/libfparser.so.$(VERSION)
- test -d $(LIBDIR) || mkdir -p $(LIBDIR)
- test -d $(INCDIR) || mkdir -p $(INCDIR)
- #$(INSTALL_DATA) ./lib/libfparser.so.$(VERSION) $(LIBDIR)
- -(ln -s $(LIBDIR)/libfparser.so.$(VERSION) $(LIBDIR)/libfparser.so)
- for IFILE in $(INS); do \
- $(INSTALL_DATA) $$IFILE $(INCDIR); \
- done
-
-clean:
- -rm -f $(OBJ)
- -rm -f ./lib/lib* Makefile.bak
- -rm -f ./include/fparser/*.h
- -$(FIND) . -name "*~" -exec rm -f {} \;
- -rm -f ./lib/libfparser.$(VERSION).a
-
-distclean: clean
- -rm -f Makefile configure
-
-depend:
- $(MAKEDEPEND) -- $(CFLAGS) -- $(SRC)
- @echo
- @echo "Run 'make' to build fparser library."
- @echo
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
diff --git a/fparser/config.log b/fparser/config.log
deleted file mode 100644
index 061a127..0000000
--- a/fparser/config.log
+++ /dev/null
@@ -1,352 +0,0 @@
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by configure, which was
-generated by GNU Autoconf 2.57. Invocation command line was
-
- $ ./configure
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = masiina
-uname -m = x86_64
-uname -r = 2.6.27.7-9-default
-uname -s = Linux
-uname -v = #1 SMP 2008-12-04 18:10:04 +0100
-
-/usr/bin/uname -p = unknown
-/bin/uname -X = unknown
-
-/bin/arch = x86_64
-/usr/bin/arch -k = unknown
-/usr/convex/getsysinfo = unknown
-hostinfo = unknown
-/bin/machine = unknown
-/usr/bin/oslevel = unknown
-/bin/universe = unknown
-
-PATH: /usr/lib64/qt3/bin
-PATH: /home/frilande/bin
-PATH: /home/frilande/bin
-PATH: /usr/local/bin
-PATH: /usr/bin
-PATH: /bin
-PATH: /usr/bin/X11
-PATH: /usr/X11R6/bin
-PATH: /usr/games
-PATH: /opt/kde3/bin
-PATH: /usr/lib64/jvm/jre/bin
-PATH: /usr/lib/mit/bin
-PATH: /usr/lib/mit/sbin
-PATH: .
-PATH: /usr/lib/qt3/bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1267: checking build system type
-configure:1285: result: x86_64-unknown-linux-gnu
-configure:1293: checking host system type
-configure:1307: result: x86_64-unknown-linux-gnu
-configure:1379: checking for gcc
-configure:1395: found /usr/bin/gcc
-configure:1405: result: gcc
-configure:1649: checking for C compiler version
-configure:1652: gcc --version </dev/null >&5
-gcc (SUSE Linux) 4.3.2 [gcc-4_3-branch revision 141291]
-Copyright (C) 2008 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:1655: $? = 0
-configure:1657: gcc -v </dev/null >&5
-Using built-in specs.
-Target: x86_64-suse-linux
-Configured with: ../configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib64 --libexecdir=/usr/lib64 --enable-languages=c,c++,objc,fortran,obj-c++,java,ada --enable-checking=release --with-gxx-include-dir=/usr/include/c++/4.3 --enable-ssp --disable-libssp --with-bugurl=http://bugs.opensuse.org/ --with-pkgversion='SUSE Linux' --disable-libgcj --disable-libmudflap --with-slibdir=/lib64 --with-system-zlib --enable-__cxa_atexit --enable-libstdcxx-allocator=new --disable-libstdcxx-pch --enable-version-specific-runtime-libs --program-suffix=-4.3 --enable-linux-futex --without-system-libunwind --with-cpu=generic --build=x86_64-suse-linux
-Thread model: posix
-gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux)
-configure:1660: $? = 0
-configure:1662: gcc -V </dev/null >&5
-gcc: '-V' option must have argument
-configure:1665: $? = 1
-configure:1689: checking for C compiler default output
-configure:1692: gcc conftest.c >&5
-configure:1695: $? = 0
-configure:1741: result: a.out
-configure:1746: checking whether the C compiler works
-configure:1752: ./a.out
-configure:1755: $? = 0
-configure:1772: result: yes
-configure:1779: checking whether we are cross compiling
-configure:1781: result: no
-configure:1784: checking for suffix of executables
-configure:1786: gcc -o conftest conftest.c >&5
-configure:1789: $? = 0
-configure:1814: result:
-configure:1820: checking for suffix of object files
-configure:1842: gcc -c conftest.c >&5
-configure:1845: $? = 0
-configure:1867: result: o
-configure:1871: checking whether we are using the GNU C compiler
-configure:1896: gcc -c conftest.c >&5
-configure:1899: $? = 0
-configure:1902: test -s conftest.o
-configure:1905: $? = 0
-configure:1918: result: yes
-configure:1924: checking whether gcc accepts -g
-configure:1946: gcc -c -g conftest.c >&5
-configure:1949: $? = 0
-configure:1952: test -s conftest.o
-configure:1955: $? = 0
-configure:1966: result: yes
-configure:1983: checking for gcc option to accept ANSI C
-configure:2044: gcc -c -g -O2 conftest.c >&5
-configure:2047: $? = 0
-configure:2050: test -s conftest.o
-configure:2053: $? = 0
-configure:2071: result: none needed
-configure:2089: gcc -c -g -O2 conftest.c >&5
-conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
-configure:2092: $? = 1
-configure: failed program was:
-| #ifndef __cplusplus
-| choke me
-| #endif
-configure:2206: checking how to run the C preprocessor
-configure:2242: gcc -E conftest.c
-configure:2248: $? = 0
-configure:2280: gcc -E conftest.c
-configure:2280:28: error: ac_nonexistent.h: No such file or directory
-configure:2286: $? = 1
-configure: failed program was:
-| #line 2271 "configure"
-| /* confdefs.h. */
-|
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define LINUX 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:2324: result: gcc -E
-configure:2349: gcc -E conftest.c
-configure:2355: $? = 0
-configure:2387: gcc -E conftest.c
-configure:2387:28: error: ac_nonexistent.h: No such file or directory
-configure:2393: $? = 1
-configure: failed program was:
-| #line 2378 "configure"
-| /* confdefs.h. */
-|
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define LINUX 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:2447: checking for a BSD-compatible install
-configure:2501: result: /usr/bin/install -c
-configure:2514: checking for find
-configure:2530: found /usr/bin/find
-configure:2541: result: find
-configure:2550: checking for makedepend
-configure:2566: found /usr/bin/makedepend
-configure:2577: result: makedepend
-configure:2591: checking for X
-configure:2697: gcc -E conftest.c
-configure:2703: $? = 0
-configure:2811: result: libraries /usr/lib64, headers
-configure:2964: gcc -o conftest -g -O2 conftest.c -L/usr/lib64 -lX11 >&5
-configure:2967: $? = 0
-configure:2970: test -s conftest
-configure:2973: $? = 0
-configure:3110: checking for gethostbyname
-configure:3160: gcc -o conftest -g -O2 conftest.c >&5
-configure:3163: $? = 0
-configure:3166: test -s conftest
-configure:3169: $? = 0
-configure:3180: result: yes
-configure:3311: checking for connect
-configure:3361: gcc -o conftest -g -O2 conftest.c >&5
-configure:3364: $? = 0
-configure:3367: test -s conftest
-configure:3370: $? = 0
-configure:3381: result: yes
-configure:3446: checking for remove
-configure:3496: gcc -o conftest -g -O2 conftest.c >&5
-configure:3499: $? = 0
-configure:3502: test -s conftest
-configure:3505: $? = 0
-configure:3516: result: yes
-configure:3581: checking for shmat
-configure:3631: gcc -o conftest -g -O2 conftest.c >&5
-configure:3634: $? = 0
-configure:3637: test -s conftest
-configure:3640: $? = 0
-configure:3651: result: yes
-configure:3725: checking for IceConnectionNumber in -lICE
-configure:3756: gcc -o conftest -g -O2 -L/usr/lib64 conftest.c -lICE >&5
-configure:3759: $? = 0
-configure:3762: test -s conftest
-configure:3765: $? = 0
-configure:3777: result: yes
-configure:3795: checking for egrep
-configure:3805: result: grep -E
-configure:3810: checking for ANSI C header files
-configure:3836: gcc -c -g -O2 conftest.c >&5
-configure:3839: $? = 0
-configure:3842: test -s conftest.o
-configure:3845: $? = 0
-configure:3937: gcc -o conftest -g -O2 -L/usr/lib64 -L/usr/local/lib conftest.c >&5
-configure: In function 'main':
-configure:3931: warning: incompatible implicit declaration of built-in function 'exit'
-configure:3940: $? = 0
-configure:3942: ./conftest
-configure:3945: $? = 0
-configure:3960: result: yes
-configure:4102: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by config.status, which was
-generated by GNU Autoconf 2.57. Invocation command line was
-
- CONFIG_FILES =
- CONFIG_HEADERS =
- CONFIG_LINKS =
- CONFIG_COMMANDS =
- $ ./config.status
-
-on masiina
-
-config.status:621: creating Makefile
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_build=x86_64-unknown-linux-gnu
-ac_cv_build_alias=x86_64-unknown-linux-gnu
-ac_cv_c_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_exeext=
-ac_cv_func_connect=yes
-ac_cv_func_gethostbyname=yes
-ac_cv_func_remove=yes
-ac_cv_func_shmat=yes
-ac_cv_have_x='have_x=yes ac_x_includes= ac_x_libraries=/usr/lib64'
-ac_cv_header_stdc=yes
-ac_cv_host=x86_64-unknown-linux-gnu
-ac_cv_host_alias=x86_64-unknown-linux-gnu
-ac_cv_lib_ICE_IceConnectionNumber=yes
-ac_cv_objext=o
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_CPP='gcc -E'
-ac_cv_prog_FIND=find
-ac_cv_prog_MAKEDEPEND=makedepend
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_cc_g=yes
-ac_cv_prog_cc_stdc=
-ac_cv_prog_egrep='grep -E'
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-CC='gcc'
-CFLAGS='-g -O2 '
-CPP='gcc -E'
-CPPFLAGS=''
-DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DLINUX=1 -DSTDC_HEADERS=1 '
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP='grep -E'
-EXEEXT=''
-FIND='find'
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-LDFLAGS=' -L/usr/lib64 -L/usr/local/lib'
-LIBOBJS=''
-LIBS=''
-LTLIBOBJS=''
-MAKEDEPEND='makedepend'
-OBJEXT='o'
-PACKAGE_BUGREPORT=''
-PACKAGE_NAME=''
-PACKAGE_STRING=''
-PACKAGE_TARNAME=''
-PACKAGE_VERSION=''
-PATH_SEPARATOR=':'
-SHELL='/bin/sh'
-X_CFLAGS=''
-X_EXTRA_LIBS=''
-X_LIBS=' -L/usr/lib64'
-X_PRE_LIBS=' -lSM -lICE'
-ac_ct_CC='gcc'
-bindir='${exec_prefix}/bin'
-build='x86_64-unknown-linux-gnu'
-build_alias=''
-build_cpu='x86_64'
-build_os='linux-gnu'
-build_vendor='unknown'
-datadir='${prefix}/share'
-exec_prefix='${prefix}'
-host='x86_64-unknown-linux-gnu'
-host_alias=''
-host_cpu='x86_64'
-host_os='linux-gnu'
-host_vendor='unknown'
-includedir='${prefix}/include'
-infodir='${prefix}/info'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localstatedir='${prefix}/var'
-mandir='${prefix}/man'
-oldincludedir='/usr/include'
-prefix='/usr/local'
-program_transform_name='s,x,x,'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target_alias=''
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define LINUX 1
-#define PACKAGE_BUGREPORT ""
-#define PACKAGE_NAME ""
-#define PACKAGE_STRING ""
-#define PACKAGE_TARNAME ""
-#define PACKAGE_VERSION ""
-#define STDC_HEADERS 1
-
-configure: exit 0
diff --git a/fparser/config.status b/fparser/config.status
deleted file mode 100755
index 5d0f44d..0000000
--- a/fparser/config.status
+++ /dev/null
@@ -1,695 +0,0 @@
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.57. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <bug-autoconf at gnu.org>."
-ac_cs_version="\
-config.status
-configured by ./configure, generated by GNU Autoconf 2.57,
- with options \"\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c"
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
- echo "running /bin/sh ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6
- exec /bin/sh ./configure $ac_configure_extra_args --no-create --no-recursion
-fi
-
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s, at SHELL@,/bin/sh,;t t
-s, at PATH_SEPARATOR@,:,;t t
-s, at PACKAGE_NAME@,,;t t
-s, at PACKAGE_TARNAME@,,;t t
-s, at PACKAGE_VERSION@,,;t t
-s, at PACKAGE_STRING@,,;t t
-s, at PACKAGE_BUGREPORT@,,;t t
-s, at exec_prefix@,${prefix},;t t
-s, at prefix@,/usr/local,;t t
-s, at program_transform_name@,s,x,x,,;t t
-s, at bindir@,${exec_prefix}/bin,;t t
-s, at sbindir@,${exec_prefix}/sbin,;t t
-s, at libexecdir@,${exec_prefix}/libexec,;t t
-s, at datadir@,${prefix}/share,;t t
-s, at sysconfdir@,${prefix}/etc,;t t
-s, at sharedstatedir@,${prefix}/com,;t t
-s, at localstatedir@,${prefix}/var,;t t
-s, at libdir@,${exec_prefix}/lib,;t t
-s, at includedir@,${prefix}/include,;t t
-s, at oldincludedir@,/usr/include,;t t
-s, at infodir@,${prefix}/info,;t t
-s, at mandir@,${prefix}/man,;t t
-s, at build_alias@,,;t t
-s, at host_alias@,,;t t
-s, at target_alias@,,;t t
-s, at DEFS@,-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DLINUX=1 -DSTDC_HEADERS=1 ,;t t
-s, at ECHO_C@,,;t t
-s, at ECHO_N@,-n,;t t
-s, at ECHO_T@,,;t t
-s, at LIBS@,,;t t
-s, at build@,x86_64-unknown-linux-gnu,;t t
-s, at build_cpu@,x86_64,;t t
-s, at build_vendor@,unknown,;t t
-s, at build_os@,linux-gnu,;t t
-s, at host@,x86_64-unknown-linux-gnu,;t t
-s, at host_cpu@,x86_64,;t t
-s, at host_vendor@,unknown,;t t
-s, at host_os@,linux-gnu,;t t
-s, at CC@,gcc,;t t
-s, at CFLAGS@,-g -O2 ,;t t
-s, at LDFLAGS@, -L/usr/lib64 -L/usr/local/lib,;t t
-s, at CPPFLAGS@,,;t t
-s, at ac_ct_CC@,gcc,;t t
-s, at EXEEXT@,,;t t
-s, at OBJEXT@,o,;t t
-s, at CPP@,gcc -E,;t t
-s, at INSTALL_PROGRAM@,${INSTALL},;t t
-s, at INSTALL_SCRIPT@,${INSTALL},;t t
-s, at INSTALL_DATA@,${INSTALL} -m 644,;t t
-s, at FIND@,find,;t t
-s, at MAKEDEPEND@,makedepend,;t t
-s, at X_CFLAGS@,,;t t
-s, at X_PRE_LIBS@, -lSM -lICE,;t t
-s, at X_LIBS@, -L/usr/lib64,;t t
-s, at X_EXTRA_LIBS@,,;t t
-s, at EGREP@,grep -E,;t t
-s, at LIBOBJS@,,;t t
-s, at LTLIBOBJS@,,;t t
-CEOF
-
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo $f;;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo $f
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo $srcdir/$f
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- sed "/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s, at configure_input@,$configure_input,;t t
-s, at srcdir@,$ac_srcdir,;t t
-s, at abs_srcdir@,$ac_abs_srcdir,;t t
-s, at top_srcdir@,$ac_top_srcdir,;t t
-s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s, at builddir@,$ac_builddir,;t t
-s, at abs_builddir@,$ac_abs_builddir,;t t
-s, at top_builddir@,$ac_top_builddir,;t t
-s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
-s, at INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-
-{ (exit 0); exit 0; }
diff --git a/qcad/src/Makefile b/qcad/src/Makefile
deleted file mode 100644
index 1ca84af..0000000
--- a/qcad/src/Makefile
+++ /dev/null
@@ -1,216 +0,0 @@
-#############################################################################
-# Makefile for building: ../qcad
-# Generated by qmake (1.07a) (Qt 3.3.8b) on: Wed Mar 18 19:30:23 2009
-# Project: qcad.pro
-# Template: app
-# Command: $(QMAKE) -o Makefile qcad.pro
-#############################################################################
-
-####### Compiler, tools and options
-
-CC = gcc
-CXX = g++
-LEX = flex
-YACC = yacc
-CFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQC_APPKEY="\"/QCad\"" -DQC_APPDIR="\"qcad\"" -DQC_APPNAME="\"QCad\"" -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-CXXFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wno-long-long -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQC_APPKEY="\"/QCad\"" -DQC_APPDIR="\"qcad\"" -DQC_APPNAME="\"QCad\"" -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-LEXFLAGS =
-YACCFLAGS= -d
-INCPATH = -I/usr/lib64/qt3/mkspecs/default -I. -I../../fparser/include -I../../dxflib/include -I../../qcadlib/include -I../../qcadcmd/include -I../../qcadactions/include -I../../qcadguiqt/include -I/usr/include -I$(QTDIR)/include -Imoc/
-LINK = g++
-LFLAGS =
-LIBS = $(SUBLIBS) -L/usr/lib64/ -L$(QTDIR)/lib64/ -L/usr/X11R6/lib64/ -lqassistantclient -L../../qcadguiqt/lib -L../../qcadactions/lib -L../../qcadcmd/lib -L../../qcadlib/lib -L../../dxflib/lib -L../../fparser/lib -L/usr/lib64 -L/usr/X11R6/lib64 -L/usr/lib64/ -L/usr/src/packages/BUILD/qt-x11-free-3.3.8b/lib -lpng -lz -lSM -lICE -ldl -lpthread -lqcadguiqt -lqcadactions -lqcadcmd -lqcad -ldxf -lfparser -lqt-mt -lXext -lX11 -lm
-AR = ar cqs
-RANLIB =
-MOC = $(QTDIR)/bin/moc
-UIC = $(QTDIR)/bin/uic
-QMAKE = qmake
-TAR = tar -cf
-GZIP = gzip -9f
-COPY = cp -f
-COPY_FILE= $(COPY)
-COPY_DIR = $(COPY) -r
-INSTALL_FILE= $(COPY_FILE)
-INSTALL_DIR = $(COPY_DIR)
-DEL_FILE = rm -f
-SYMLINK = ln -sf
-DEL_DIR = rmdir
-MOVE = mv -f
-CHK_DIR_EXISTS= test -d
-MKDIR = mkdir -p
-
-####### Output directory
-
-OBJECTS_DIR = obj/
-
-####### Files
-
-HEADERS = qc_applicationwindow.h \
- qc_dialogfactory.h \
- qc_graphicview.h \
- qc_mdiwindow.h \
- main.h
-SOURCES = qc_applicationwindow.cpp \
- qc_dialogfactory.cpp \
- qc_graphicview.cpp \
- qc_mdiwindow.cpp \
- main.cpp
-OBJECTS = obj/qc_applicationwindow.o \
- obj/qc_dialogfactory.o \
- obj/qc_graphicview.o \
- obj/qc_mdiwindow.o \
- obj/main.o \
- obj/qmake_image_collection.o
-FORMS =
-UICDECLS =
-UICIMPLS =
-SRCMOC = moc/moc_qc_applicationwindow.cpp \
- moc/moc_qc_graphicview.cpp \
- moc/moc_qc_mdiwindow.cpp
-OBJMOC = obj/moc_qc_applicationwindow.o \
- obj/moc_qc_graphicview.o \
- obj/moc_qc_mdiwindow.o
-DIST = ../../mkspecs/defs.pro \
- qcad.pro
-QMAKE_TARGET = qcad
-DESTDIR = ../
-TARGET = ../qcad
-
-first: all
-####### Implicit rules
-
-.SUFFIXES: .c .o .cpp .cc .cxx .C
-
-.cpp.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cc.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cxx.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.C.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.c.o:
- $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $<
-
-####### Build rules
-
-all: Makefile $(TARGET)
-
-$(TARGET): $(UICDECLS) $(OBJECTS) $(OBJMOC)
- test -d ../ || mkdir -p ../
- $(LINK) $(LFLAGS) -o $(TARGET) $(OBJECTS) $(OBJMOC) $(OBJCOMP) $(LIBS)
-
-mocables: $(SRCMOC)
-uicables: $(UICDECLS) $(UICIMPLS)
-
-$(MOC):
- ( cd $(QTDIR)/src/moc && $(MAKE) )
-
-Makefile: qcad.pro /usr/lib64/qt3/mkspecs/default/qmake.conf ../../mkspecs/defs.pro \
- /usr/lib64/qt3/lib64/libqassistantclient.prl \
- /usr/lib64/qt3/lib64/libqt-mt.prl
- $(QMAKE) -o Makefile qcad.pro
-qmake:
- @$(QMAKE) -o Makefile qcad.pro
-
-dist:
- @mkdir -p obj/qcad && $(COPY_FILE) --parents $(SOURCES) $(HEADERS) $(FORMS) $(DIST) obj/qcad/ && $(COPY_FILE) --parents ts/qcad_cs.ts ts/qcad_et.ts ts/qcad_en.ts ts/qcad_da.ts ts/qcad_de.ts ts/qcad_el.ts ts/qcad_es.ts ts/qcad_fr.ts ts/qcad_hu.ts ts/qcad_it.ts ts/qcad_nl.ts ts/qcad_no.ts ts/qcad_pa.ts ts/qcad_pl.ts ts/qcad_ru.ts ts/qcad_sk.ts ts/qcad_tr.ts obj/qcad/ && $(COPY_FILE) --parents images/contents.png images/document.png images/editclear.png images/qcad16.png images/qcad.png obj/qcad/ && ( cd `dirname obj/qcad` && $(TAR) qcad.tar qcad && $(GZIP) qcad.tar ) && $(MOVE) `dirname obj/qcad`/qcad.tar.gz . && $(DEL_FILE) -r obj/qcad
-
-mocclean:
- -$(DEL_FILE) $(OBJMOC)
- -$(DEL_FILE) $(SRCMOC)
-
-uiclean:
-
-yaccclean:
-lexclean:
-clean: mocclean
- -$(DEL_FILE) $(OBJECTS)
- -$(DEL_FILE) qmake_image_collection.cpp
- -$(DEL_FILE) *~ core *.core
-
-
-####### Sub-libraries
-
-distclean: clean
- -$(DEL_FILE) ../$(TARGET) $(TARGET)
-
-
-FORCE:
-
-####### Compile
-
-obj/qc_applicationwindow.o: qc_applicationwindow.cpp qc_applicationwindow.h \
- qc_mdiwindow.h \
- qc_dialogfactory.h \
- main.h \
- qc_graphicview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qc_applicationwindow.o qc_applicationwindow.cpp
-
-obj/qc_dialogfactory.o: qc_dialogfactory.cpp qc_dialogfactory.h \
- qc_applicationwindow.h \
- qc_graphicview.h \
- qc_mdiwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qc_dialogfactory.o qc_dialogfactory.cpp
-
-obj/qc_graphicview.o: qc_graphicview.cpp qc_graphicview.h \
- qc_applicationwindow.h \
- qc_dialogfactory.h \
- qc_mdiwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qc_graphicview.o qc_graphicview.cpp
-
-obj/qc_mdiwindow.o: qc_mdiwindow.cpp qc_mdiwindow.h \
- qc_graphicview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qc_mdiwindow.o qc_mdiwindow.cpp
-
-obj/main.o: main.cpp main.h \
- qc_applicationwindow.h \
- xpm/intro_camexpert.xpm \
- xpm/splash_camexpert.xpm \
- xpm/intro_qcad.xpm \
- xpm/splash_qcad.xpm \
- qc_dialogfactory.h \
- qc_graphicview.h \
- qc_mdiwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/main.o main.cpp
-
-obj/moc_qc_applicationwindow.o: moc/moc_qc_applicationwindow.cpp qc_applicationwindow.h qc_dialogfactory.h \
- qc_graphicview.h \
- qc_mdiwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qc_applicationwindow.o moc/moc_qc_applicationwindow.cpp
-
-obj/moc_qc_graphicview.o: moc/moc_qc_graphicview.cpp qc_graphicview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qc_graphicview.o moc/moc_qc_graphicview.cpp
-
-obj/moc_qc_mdiwindow.o: moc/moc_qc_mdiwindow.cpp qc_mdiwindow.h qc_graphicview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qc_mdiwindow.o moc/moc_qc_mdiwindow.cpp
-
-moc/moc_qc_applicationwindow.cpp: $(MOC) qc_applicationwindow.h
- $(MOC) qc_applicationwindow.h -o moc/moc_qc_applicationwindow.cpp
-
-moc/moc_qc_graphicview.cpp: $(MOC) qc_graphicview.h
- $(MOC) qc_graphicview.h -o moc/moc_qc_graphicview.cpp
-
-moc/moc_qc_mdiwindow.cpp: $(MOC) qc_mdiwindow.h
- $(MOC) qc_mdiwindow.h -o moc/moc_qc_mdiwindow.cpp
-
-obj/qmake_image_collection.o: qmake_image_collection.cpp
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qmake_image_collection.o qmake_image_collection.cpp
-
-qmake_image_collection.cpp: images/contents.png \
- images/document.png \
- images/editclear.png \
- images/qcad16.png \
- images/qcad.png
- $(UIC) -embed qcad images/contents.png images/document.png images/editclear.png images/qcad16.png images/qcad.png -o qmake_image_collection.cpp
-
-####### Install
-
-install:
-
-uninstall:
-
diff --git a/qcad/src/qc_applicationwindow.cpp.orig b/qcad/src/qc_applicationwindow.cpp.orig
deleted file mode 100644
index 580cb17..0000000
--- a/qcad/src/qc_applicationwindow.cpp.orig
+++ /dev/null
@@ -1,4098 +0,0 @@
-/****************************************************************************
-** $Id: qc_applicationwindow.cpp 2416 2005-06-17 10:50:10Z andrew $
-**
-** Copyright (C) 2001-2003 RibbonSoft. All rights reserved.
-**
-** This file is part of the QCad project.
-**
-** This file may be distributed and/or modified under the terms of the
-** GNU General Public License version 2 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.
-**
-** Licensees holding valid QCad Professional Edition licenses may use
-** this file in accordance with the qcadlib Commercial License
-** Agreement provided with the Software.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-** See http://www.ribbonsoft.com for further details.
-**
-** Contact info at ribbonsoft.com if any conditions of this licensing are
-** not clear to you.
-**
-**********************************************************************/
-
-#include "qc_applicationwindow.h"
-
-#include <fstream>
-
-#include <qaccel.h>
-#include <qaction.h>
-#include <qapplication.h>
-#include <qdatetime.h>
-#include <qfile.h>
-#include <qfiledialog.h>
-#include <qkeycode.h>
-#include <qmessagebox.h>
-#include <qpaintdevicemetrics.h>
-#include <qpainter.h>
-#include <qprinter.h>
-#include <qtimer.h>
-#include <qtextstream.h>
-#include <qvbox.h>
-
-#if QT_VERSION>=0x030000
-#include <qdockwindow.h>
-#include <qeventloop.h>
-#include <qtextedit.h>
-#endif
-
-#include "rs_application.h"
-#include "rs_actiondrawlinefree.h"
-#include "rs_actionprintpreview.h"
-#include "rs_creation.h"
-#include "rs_dialogfactory.h"
-#include "rs_dimaligned.h"
-#include "rs_dimlinear.h"
-#include "rs_dimradial.h"
-#include "rs_ellipse.h"
-#include "rs_hatch.h"
-#include "rs_image.h"
-#include "rs_fileio.h"
-#include "rs_insert.h"
-#include "rs_text.h"
-#include "rs_settings.h"
-#include "rs_script.h"
-#include "rs_scriptlist.h"
-#include "rs_solid.h"
-#include "rs_staticgraphicview.h"
-#include "rs_system.h"
-#include "rs_actionlibraryinsert.h"
-
-#ifdef RS_CAM
-#include "rs_camdialog.h"
-#include "rs_simulationcontrols.h"
-#endif
-
-#include "qg_cadtoolbarmain.h"
-#include "qg_colorbox.h"
-#include "qg_coordinatewidget.h"
-#include "qg_dlgimageoptions.h"
-#include "qg_filedialog.h"
-#include "qg_mousewidget.h"
-#include "qg_pentoolbar.h"
-#include "qg_selectionwidget.h"
-#include "qg_cadtoolbarmain.h"
-#include "qg_dlgimageoptions.h"
-#include "qg_mousewidget.h"
-
-#include "qc_mdiwindow.h"
-#include "qc_dialogfactory.h"
-#include "main.h"
-
-QC_ApplicationWindow* QC_ApplicationWindow::appWindow = NULL;
-
-#ifndef QC_APP_ICON
-# define QC_APP_ICON "qcad.png"
-#endif
-#ifndef QC_APP_ICON16
-# define QC_APP_ICON16 "qcad16.png"
-#endif
-
-#if QT_VERSION>=0x030200
-# include <qsplashscreen.h>
- extern QSplashScreen *splash;
-#endif
-
-/**
- * Constructor. Initializes the app.
- */
-QC_ApplicationWindow::QC_ApplicationWindow()
- : QMainWindow(0, "", WDestructiveClose),
- QG_MainWindowInterface()
-{
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow");
-
- appWindow = this;
- assistant = NULL;
- workspace = NULL;
-
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: setting icon");
- setIcon(QPixmap::fromMimeSource(QC_APP_ICON));
-
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: creating action handler");
- actionHandler = new QG_ActionHandler(this);
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: creating action handler: OK");
-
-#ifdef RS_SCRIPTING
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: creating scripter");
- scripter = new QS_Scripter(this, this);
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: creating scripter: OK");
-#endif
-
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init view");
- initView();
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init toolbar");
- initToolBar();
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init actions");
- initActions();
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init menu bar");
- initMenuBar();
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init status bar");
- initStatusBar();
-
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: creating dialogFactory");
- dialogFactory = new QC_DialogFactory(this, optionWidget);
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: creating dialogFactory: OK");
- RS_DEBUG->print("setting dialog factory object");
- if (RS_DialogFactory::instance()==NULL) {
- RS_DEBUG->print("no RS_DialogFactory instance");
- }
- else {
- RS_DEBUG->print("got RS_DialogFactory instance");
- }
- RS_DialogFactory::instance()->setFactoryObject(dialogFactory);
- RS_DEBUG->print("setting dialog factory object: OK");
-
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init settings");
- initSettings();
-
- RS_DEBUG->print("QC_ApplicationWindow::QC_ApplicationWindow: init MDI");
- initMDI();
-
- // Disable menu and toolbar items
- emit windowsChanged(FALSE);
-
-
- statusBar()->message(QC_APPNAME " Ready", 2000);
- //setFocusPolicy(WheelFocus);
-}
-
-
-
-/**
- * Destructor.
- */
-QC_ApplicationWindow::~QC_ApplicationWindow() {
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow");
-#ifdef RS_SCRIPTING
-
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting scripter");
-
- delete scripter;
-
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting scripter: OK");
-
-#endif
-
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting action handler");
-
- delete actionHandler;
-
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting action handler: OK");
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting dialog factory");
-
- delete dialogFactory;
-
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting dialog factory: OK");
-
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting assistant..");
- if (assistant!=NULL) {
- delete assistant;
- }
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: "
- "deleting assistant: OK");
- RS_DEBUG->print("QC_ApplicationWindow::~QC_ApplicationWindow: OK");
-}
-
-
-
-/**
- * Runs the start script if scripting is available.
- */
-void QC_ApplicationWindow::slotRunStartScript() {
- slotRunScript("autostart.qs");
- restoreDocks();
-}
-
-
-
-/**
- * Runs a script. The action that triggers this slot has to carry the
- * name of the script file.
- */
-void QC_ApplicationWindow::slotRunScript() {
- RS_DEBUG->print("QC_ApplicationWindow::slotRunScript");
-
- const QObject* s = sender();
- if (s!=NULL) {
- QString script = ((QAction*)s)->text();
- RS_DEBUG->print("QC_ApplicationWindow::slotRunScript: %s",
- script.latin1());
- slotRunScript(script);
- }
-}
-
-
-
-/**
- * Runs the script with the given name.
- */
-void QC_ApplicationWindow::slotRunScript(const QString& name) {
-#ifdef RS_SCRIPTING
- RS_DEBUG->print("QC_ApplicationWindow::slotRunScript");
-
- if (scripter==NULL) {
- RS_DEBUG->print(RS_Debug::D_WARNING,
- "QC_ApplicationWindow::slotRunScript: "
- "scripter not initialized");
- return;
- }
-
- statusBar()->message(tr("Running script '%1'").arg(name), 2000);
-
- QStringList scriptList = RS_SYSTEM->getScriptList();
- scriptList.append(RS_SYSTEM->getHomeDir() + "/.qcad/" + name);
-
- for (QStringList::Iterator it = scriptList.begin(); it!=scriptList.end(); ++it) {
- RS_DEBUG->print("QC_ApplicationWindow::slotRunScript: "
- "checking script '%s'", (*it).latin1());
- QFileInfo fi(*it);
- if (fi.exists() && fi.fileName()==name) {
- RS_DEBUG->print("QC_ApplicationWindow::slotRunScript: running '%s'",
- (*it).latin1());
- scripter->runScript(*it, "main");
- }
- }
-#endif
-}
-
-
-
-/**
- * Called from toolbar buttons that were added by scripts to
- * insert blocks.
- */
-void QC_ApplicationWindow::slotInsertBlock() {
- const QObject* s = sender();
- if (s!=NULL) {
- QString block = ((QAction*)s)->text();
- RS_DEBUG->print("QC_ApplicationWindow::slotInsertBlock: %s",
- block.latin1());
- slotInsertBlock(block);
- }
-}
-
-
-
-/**
- * Called to insert blocks.
- */
-void QC_ApplicationWindow::slotInsertBlock(const QString& name) {
- RS_DEBUG->print("QC_ApplicationWindow::slotInsertBlock: '%s'", name.latin1());
-
- statusBar()->message(tr("Inserting block '%1'").arg(name), 2000);
-
- RS_GraphicView* graphicView = getGraphicView();
- RS_Document* document = getDocument();
- if (graphicView!=NULL && document!=NULL) {
- RS_ActionLibraryInsert* action =
- new RS_ActionLibraryInsert(*document, *graphicView);
- action->setFile(name);
- graphicView->setCurrentAction(action);
- }
-}
-
-
-
-/**
- * Shows the main application window and a splash screen.
- */
-void QC_ApplicationWindow::show() {
-#ifdef QSPLASHSCREEN_H
- if (splash) {
- splash->raise();
- }
-#endif
-
- QMainWindow::show();
-#ifdef QSPLASHSCREEN_H
- if (splash) {
- splash->raise();
- qApp->processEvents();
- splash->clear();
-# ifdef QC_DELAYED_SPLASH_SCREEN
- QTimer::singleShot(1000*2, this, SLOT(finishSplashScreen()));
-# else
- finishSplashScreen();
-# endif
- }
-#endif
-}
-
-
-
-/**
- * Called when the splash screen has to terminate.
- */
-void QC_ApplicationWindow::finishSplashScreen() {
-#ifdef QSPLASHSCREEN_H
- if (splash) {
- splash->finish(this);
- delete splash;
- splash = 0;
- }
-#endif
-}
-
-
-
-/**
- * Close Event. Called when the user tries to close the app.
- */
-void QC_ApplicationWindow::closeEvent(QCloseEvent* /*ce*/) {
- RS_DEBUG->print("QC_ApplicationWindow::closeEvent()");
-
- slotFileQuit();
-
- RS_DEBUG->print("QC_ApplicationWindow::closeEvent(): OK");
-}
-
-
-
-/**
- * Handles right-clicks for moving back to the last cad tool bar.
- */
-void QC_ApplicationWindow::mouseReleaseEvent(QMouseEvent* e) {
- if (e->button()==RightButton && cadToolBar!=NULL) {
- cadToolBar->showToolBarMain();
- }
- e->accept();
-}
-
-
-
-/**
- * Initializes the MDI workspace.
- */
-void QC_ApplicationWindow::initMDI() {
- RS_DEBUG->print("QC_ApplicationWindow::initMDI() begin");
-
- QVBox* vb = new QVBox(this);
- vb->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);
- workspace = new QWorkspace(vb);
- workspace->setScrollBarsEnabled(true);
- setCentralWidget(vb);
-
- connect(workspace, SIGNAL(windowActivated(QWidget*)),
- this, SLOT(slotWindowActivated(QWidget*)));
-
- RS_DEBUG->print("QC_ApplicationWindow::initMDI() end");
-}
-
-
-
-/**
- * Initializes all QActions of the application.
- */
-void QC_ApplicationWindow::initActions() {
- RS_DEBUG->print("QC_ApplicationWindow::initActions()");
-
- QG_ActionFactory actionFactory(actionHandler, this);
- QAction* action;
- QPopupMenu* menu;
- QToolBar* tb;
- QPopupMenu* subMenu;
-
-
- // File actions:
- //
- menu = new QPopupMenu(this);
- tb = fileToolBar;
- tb->setCaption("File");
-#if QT_VERSION>=0x030000
-
- tb->setCloseMode(QDockWindow::Undocked);
-#endif
-
- action = actionFactory.createAction(RS2::ActionFileNew, this);
- action->addTo(menu);
- action->addTo(tb);
- action = actionFactory.createAction(RS2::ActionFileOpen, this);
- action->addTo(menu);
- action->addTo(tb);
- action = actionFactory.createAction(RS2::ActionFileSave, this);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionFileSaveAs, this);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionFileExport, this);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertSeparator();
- action = actionFactory.createAction(RS2::ActionFileClose, this);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertSeparator();
- action = actionFactory.createAction(RS2::ActionFilePrint, this);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionFilePrintPreview, this);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(printPreviewChanged(bool)), action, SLOT(setOn(bool)));
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertSeparator();
- action = actionFactory.createAction(RS2::ActionFileQuit, this);
- action->addTo(menu);
- menu->insertSeparator();
- menuBar()->insertItem(tr("&File"), menu);
- //addToolBar(tb, tr("File"));
- addDockWindow(tb, tr("File"), DockTop);
- fileMenu = menu;
-
- // Editing actions:
- //
- menu=new QPopupMenu(this);
- tb = editToolBar;
- tb->setCaption("Edit");
-#if QT_VERSION>=0x030000
-
- tb->setCloseMode(QDockWindow::Undocked);
-#endif
-
- action = actionFactory.createAction(RS2::ActionEditUndo, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionEditRedo, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-
- tb->addSeparator();
- menu->insertSeparator();
-
- action = actionFactory.createAction(RS2::ActionEditCut, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionEditCopy, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionEditPaste, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-
- menu->insertSeparator();
-
- action = actionFactory.createAction(RS2::ActionOptionsGeneral, this);
- action->addTo(menu);
- action = actionFactory.createAction(RS2::ActionOptionsDrawing, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-
- menuBar()->insertItem(tr("&Edit"), menu);
- //addToolBar(tb, tr("Edit"));
- addDockWindow(tb, tr("Edit"), DockTop);
-
- // Options menu:
- //
- //menu = new QPopupMenu(this);
- //menuBar()->insertItem(tr("&Options"), menu);
-
- // Viewing / Zooming actions:
- //
- menu = new QPopupMenu(this);
- menu->setCheckable(true);
- tb = zoomToolBar;
- tb->setCaption("View");
-#if QT_VERSION>=0x030000
-
- tb->setCloseMode(QDockWindow::Undocked);
-#endif
-
- action = actionFactory.createAction(RS2::ActionViewGrid, this);
- action->addTo(menu);
- action->addTo(tb);
- action->setOn(true);
- connect(this, SIGNAL(gridChanged(bool)), action, SLOT(setOn(bool)));
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-
- RS_SETTINGS->beginGroup("/Appearance");
- bool draftMode = (bool)RS_SETTINGS->readNumEntry("/DraftMode", 0);
- RS_SETTINGS->endGroup();
-
- action = actionFactory.createAction(RS2::ActionViewDraft, this);
- action->addTo(menu);
- action->addTo(tb);
- action->setOn(draftMode);
- connect(this, SIGNAL(draftChanged(bool)), action, SLOT(setOn(bool)));
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-
- /*
- action = actionFactory.createAction(RS2::ActionViewLayerList, this);
- action->addTo(menu);
- action->setOn(true);
- action = actionFactory.createAction(RS2::ActionViewBlockList, this);
- action->addTo(menu);
- action->setOn(true);
- action = actionFactory.createAction(RS2::ActionViewOptionToolbar, this);
- action->addTo(menu);
- action->setOn(true);
- action = actionFactory.createAction(RS2::ActionViewCommandLine, this);
- action->addTo(menu);
- action->setOn(true);*/
-
- /*
- action = new QAction(tr("Back"),
- tr("&Back"), Key_Escape, this);
- connect(action, SIGNAL(activated()),
- this, SLOT(slotBack()));
- action->addTo(menu);
- */
-
-
- action = actionFactory.createAction(RS2::ActionZoomRedraw, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionZoomIn, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionZoomOut, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionZoomAuto, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionZoomPrevious, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionZoomWindow, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionZoomPan, actionHandler);
- action->addTo(menu);
- action->addTo(tb);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-
- menu->insertSeparator();
-
- action = actionFactory.createAction(RS2::ActionViewStatusBar, this);
- action->addTo(menu);
- action->setOn(true);
-
- menu->insertItem(tr("Vie&ws"), createDockWindowMenu(NoToolBars));
- menu->insertItem(tr("Tool&bars"), createDockWindowMenu(OnlyToolBars));
-
- action = new QAction(tr("Focus on Command Line"), QPixmap::fromMimeSource("editclear.png"),
- tr("Focus on &Command Line"), Key_Space, this);
- connect(action, SIGNAL(activated()),
- this, SLOT(slotFocusCommandLine()));
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&View"), menu);
- //addToolBar(tb, tr("View"));
- addDockWindow(tb, tr("View"), DockTop);
-
- // Selecting actions:
- //
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDeselectAll, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectAll, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectSingle, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectContour, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDeselectWindow, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectWindow, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectInvert, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectIntersected,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDeselectIntersected,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSelectLayer, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Select"), menu);
-
- // Drawing actions:
- //
- menu=new QPopupMenu(this);
-
- // Points:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawPoint, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertItem(tr("&Point"), subMenu);
-
- // Lines:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawLine,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineAngle,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineHorizontal,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineVertical,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineRectangle,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineParallel,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineParallelThrough,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineBisector,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineTangent1,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineTangent2,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineOrthogonal,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineRelAngle,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLineFree,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- //action = actionFactory.createAction(RS2::ActionDrawLineHorVert,
- // actionHandler);
- //action->addTo(subMenu);
- action = actionFactory.createAction(RS2::ActionDrawLinePolygon,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawLinePolygon2,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-#ifdef RS_PROF
- action = actionFactory.createAction(RS2::ActionDrawPolyline,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-#endif
- menu->insertItem(tr("&Line"), subMenu);
-
- // Arcs:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawArc, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawArc3P, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawArcParallel, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertItem(tr("&Arc"), subMenu);
- // Circles:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawCircle, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawCircleCR, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawCircle2P, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawCircle3P, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawCircleParallel, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertItem(tr("&Circle"), subMenu);
-
- // Ellipses:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawEllipseAxis,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDrawEllipseArcAxis,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertItem(tr("&Ellipse"), subMenu);
-
- // Splines:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawSpline, actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertItem(tr("&Spline"), subMenu);
-
-#ifdef RS_PROF
- // Polylines:
- subMenu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDrawPolyline,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionPolylineAdd,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionPolylineDel,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionPolylineDelBetween,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionPolylineTrim,
- actionHandler);
- action->addTo(subMenu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertItem(tr("&Polyline"), subMenu);
-#endif
-
- // Text:
- action = actionFactory.createAction(RS2::ActionDrawText,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- // Hatch:
- action = actionFactory.createAction(RS2::ActionDrawHatch,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- // Image:
- action = actionFactory.createAction(RS2::ActionDrawImage,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Draw"), menu);
-
- // Dimensioning actions:
- //
-#ifdef __APPLE__
-
- QPopupMenu* m = menu;
-#endif
-
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionDimAligned, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimLinear, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimLinearHor, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimLinearVer, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimRadial, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimDiametric, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimAngular, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionDimLeader, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
-#ifdef __APPLE__
-
- m->insertItem(tr("&Dimension"), menu);
-#else
-
- menuBar()->insertItem(tr("&Dimension"), menu);
-#endif
-
- // Modifying actions:
- //
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionModifyMove,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyRotate,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyScale,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyMirror,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyMoveRotate,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyRotate2,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyTrim,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyTrim2,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyTrimAmount,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyBevel,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyRound,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyCut,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyStretch,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyEntity,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyAttributes,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyDelete,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyDeleteQuick,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionModifyExplodeText,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- //action = actionFactory.createAction(RS2::ActionModifyDeleteFree,
- // actionHandler);
- //action->addTo(menu);
- action = actionFactory.createAction(RS2::ActionBlocksExplode, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Modify"), menu);
-
- // Snapping actions:
- //
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionSnapFree, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action->setOn(true);
- action = actionFactory.createAction(RS2::ActionSnapGrid, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapEndpoint,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapOnEntity,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapCenter, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapMiddle, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapDist, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapIntersection,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionSnapIntersectionManual,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertSeparator();
- action = actionFactory.createAction(RS2::ActionRestrictNothing,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionRestrictOrthogonal,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionRestrictHorizontal,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionRestrictVertical,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menu->insertSeparator();
- action = actionFactory.createAction(RS2::ActionSetRelativeZero,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionLockRelativeZero,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Snap"), menu);
-
- // Info actions:
- //
- menu=new QPopupMenu(this);
- //action = actionFactory.createAction(RS2::ActionInfoInside,
- // actionHandler);
- //action->addTo(menu);
- action = actionFactory.createAction(RS2::ActionInfoDist,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionInfoDist2,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionInfoAngle,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionInfoTotalLength,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Info"), menu);
-
- // Layer actions:
- //
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionLayersDefreezeAll,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionLayersFreezeAll,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionLayersAdd, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionLayersRemove,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionLayersEdit, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionLayersToggleView,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Layer"), menu);
-
- // Block actions:
- //
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionBlocksDefreezeAll,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksFreezeAll,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksAdd, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksRemove, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksAttributes,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksInsert,
- actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksEdit, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksCreate, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionBlocksExplode, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&Block"), menu);
-
-
- addDockWindow(penToolBar, tr("Pen"), DockTop);
- addDockWindow(optionWidget, tr("Tool Options"), DockTop, true);
-
-#ifdef RS_SCRIPTING
- // Scripts menu:
- //
- scriptMenu = new QPopupMenu(this);
- scriptOpenIDE = actionFactory.createAction(RS2::ActionScriptOpenIDE, this);
- scriptOpenIDE->addTo(scriptMenu);
- scriptRun = actionFactory.createAction(RS2::ActionScriptRun, this);
- scriptRun->addTo(scriptMenu);
-#else
- scriptMenu = 0;
- scriptOpenIDE = 0;
- scriptRun = 0;
-#endif
-
- // CAM menu:
-#ifdef RS_CAM
-
- menu=new QPopupMenu(this);
- action = actionFactory.createAction(RS2::ActionCamExportAuto, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- action = actionFactory.createAction(RS2::ActionCamReorder, actionHandler);
- action->addTo(menu);
- connect(this, SIGNAL(windowsChanged(bool)), action, SLOT(setEnabled(bool)));
- menuBar()->insertItem(tr("&CAM"), menu);
-#endif
-
- // Help menu:
- //
- helpAboutApp = new QAction(tr("About"),
- QPixmap::fromMimeSource(QC_APP_ICON16),
- tr("&About %1").arg(QC_APPNAME), 0, this);
- helpAboutApp->setStatusTip(tr("About the application"));
- //helpAboutApp->setWhatsThis(tr("About\n\nAbout the application"));
- connect(helpAboutApp, SIGNAL(activated()),
- this, SLOT(slotHelpAbout()));
-
- helpManual = new QAction(QPixmap::fromMimeSource("contents.png"), tr("&Manual"), Key_F1, this);
- helpManual->setStatusTip(tr("Launch the online manual"));
- connect(helpManual, SIGNAL(activated()),
- this, SLOT(slotHelpManual()));
-
- testDumpEntities = new QAction("Dump Entities",
- "Dump &Entities", 0, this);
- connect(testDumpEntities, SIGNAL(activated()),
- this, SLOT(slotTestDumpEntities()));
-
- testDumpUndo = new QAction("Dump Undo Info",
- "Undo Info", 0, this);
- connect(testDumpUndo, SIGNAL(activated()),
- this, SLOT(slotTestDumpUndo()));
-
- testUpdateInserts = new QAction("Update Inserts",
- "&Update Inserts", 0, this);
- connect(testUpdateInserts, SIGNAL(activated()),
- this, SLOT(slotTestUpdateInserts()));
-
- testDrawFreehand = new QAction("Draw Freehand",
- "Draw Freehand", 0, this);
- connect(testDrawFreehand, SIGNAL(activated()),
- this, SLOT(slotTestDrawFreehand()));
-
- testInsertBlock = new QAction("Insert Block",
- "Insert Block", 0, this);
- connect(testInsertBlock, SIGNAL(activated()),
- this, SLOT(slotTestInsertBlock()));
-
- testInsertText = new QAction("Insert Text",
- "Insert Text", 0, this);
- connect(testInsertText, SIGNAL(activated()),
- this, SLOT(slotTestInsertText()));
-
- testInsertImage = new QAction("Insert Image",
- "Insert Image", 0, this);
- connect(testInsertImage, SIGNAL(activated()),
- this, SLOT(slotTestInsertImage()));
-
- testUnicode = new QAction("Unicode",
- "Unicode", 0, this);
- connect(testUnicode, SIGNAL(activated()),
- this, SLOT(slotTestUnicode()));
-
- testInsertEllipse = new QAction("Insert Ellipse",
- "Insert Ellipse", 0, this);
- connect(testInsertEllipse, SIGNAL(activated()),
- this, SLOT(slotTestInsertEllipse()));
-
- testMath01 = new QAction("Math01",
- "Math01", 0, this);
- connect(testMath01, SIGNAL(activated()),
- this, SLOT(slotTestMath01()));
-
- testResize640 = new QAction("Resize to 640x480",
- "Resize 1", 0, this);
- connect(testResize640, SIGNAL(activated()),
- this, SLOT(slotTestResize640()));
-
- testResize800 = new QAction("Resize to 800x600",
- "Resize 2", 0, this);
- connect(testResize800, SIGNAL(activated()),
- this, SLOT(slotTestResize800()));
-
- testResize1024 = new QAction("Resize to 1024x768",
- "Resize 3", 0, this);
- connect(testResize1024, SIGNAL(activated()),
- this, SLOT(slotTestResize1024()));
-
-}
-
-
-/**
- * Initializes the menu bar.
- */
-void QC_ApplicationWindow::initMenuBar() {
- RS_DEBUG->print("QC_ApplicationWindow::initMenuBar()");
-
- // menuBar entry windowsMenu
- windowsMenu = new QPopupMenu(this);
- windowsMenu->setCheckable(true);
- connect(windowsMenu, SIGNAL(aboutToShow()),
- this, SLOT(slotWindowsMenuAboutToShow()));
-
- // menuBar entry scriptMenu
- //scriptMenu = new QPopupMenu(this);
- //scriptMenu->setCheckable(true);
- //scriptOpenIDE->addTo(scriptMenu);
- //scriptRun->addTo(scriptMenu);
- //connect(scriptMenu, SIGNAL(aboutToShow()),
- // this, SLOT(slotScriptMenuAboutToShow()));
-
- // menuBar entry helpMenu
- helpMenu=new QPopupMenu();
- helpManual->addTo(helpMenu);
- helpMenu->insertSeparator();
- helpAboutApp->addTo(helpMenu);
-
- // menuBar entry test menu
- testMenu=new QPopupMenu();
- testDumpEntities->addTo(testMenu);
- testDumpUndo->addTo(testMenu);
- testUpdateInserts->addTo(testMenu);
- testDrawFreehand->addTo(testMenu);
- testInsertBlock->addTo(testMenu);
- testInsertText->addTo(testMenu);
- testInsertImage->addTo(testMenu);
- testInsertEllipse->addTo(testMenu);
- testUnicode->addTo(testMenu);
- testMath01->addTo(testMenu);
- testResize640->addTo(testMenu);
- testResize800->addTo(testMenu);
- testResize1024->addTo(testMenu);
-
- // menuBar configuration
-#ifdef RS_SCRIPTING
- menuBar()->insertItem(tr("&Scripts"), scriptMenu);
-#endif
- menuBar()->insertItem(tr("&Window"), windowsMenu);
- menuBar()->insertSeparator();
- menuBar()->insertItem(tr("&Help"), helpMenu);
- if (QC_DEBUGGING) {
- menuBar()->insertItem(tr("De&bugging"), testMenu);
- }
-
- recentFiles = new QG_RecentFiles(9);
-}
-
-
-
-/**
- * Initializes the tool bars (file tool bar and pen tool bar).
- */
-void QC_ApplicationWindow::initToolBar() {
- RS_DEBUG->print("QC_ApplicationWindow::initToolBar()");
-
- fileToolBar = new QToolBar(this, "File Operations");
- editToolBar = new QToolBar(this, "Edit Operations");
- zoomToolBar = new QToolBar(this, "Zoom Operations");
- penToolBar = new QG_PenToolBar(this, "Pen Selection");
-
- connect(penToolBar, SIGNAL(penChanged(RS_Pen)),
- this, SLOT(slotPenChanged(RS_Pen)));
-
- optionWidget = new QToolBar(this, "Tool Options");
- optionWidget->setFixedExtentHeight(26);
- //optionWidget->setHorizontallyStretchable(true);
- //addDockWindow(optionWidget, DockTop, true);
-
- // CAD toolbar left:
- QToolBar* t = new QToolBar(this, "CAD Tools");
- t->setFixedExtentWidth(59);
- t->setVerticallyStretchable(true);
- addDockWindow(t, DockLeft, false);
-
- cadToolBar = new QG_CadToolBar(t, "CAD Tools");
- cadToolBar->createSubToolBars(actionHandler);
-
- connect(cadToolBar, SIGNAL(signalBack()),
- this, SLOT(slotBack()));
- connect(this, SIGNAL(windowsChanged(bool)),
- cadToolBar, SLOT(setEnabled(bool)));
-
- //QG_CadToolBarMain* cadToolBarMain =
- //new QG_CadToolBarMain(cadToolBar);
-}
-
-
-
-/**
- * Initializes the status bar at the bottom.
- */
-void QC_ApplicationWindow::initStatusBar() {
- RS_DEBUG->print("QC_ApplicationWindow::initStatusBar()");
-
- statusBar()->setMinimumHeight(32);
- coordinateWidget = new QG_CoordinateWidget(statusBar(), "coordinates");
- statusBar()->addWidget(coordinateWidget);
- mouseWidget = new QG_MouseWidget(statusBar(), "mouse info");
- statusBar()->addWidget(mouseWidget);
- selectionWidget = new QG_SelectionWidget(statusBar(), "selections");
- statusBar()->addWidget(selectionWidget);
-}
-
-
-
-/**
- * Initializes the global application settings from the
- * config file (unix, mac) or registry (windows).
- */
-void QC_ApplicationWindow::initSettings() {
- RS_DEBUG->print("QC_ApplicationWindow::initSettings()");
-
- //RS_Settings settings(QC_REGISTRY, QC_APPKEY);
-
- RS_SETTINGS->beginGroup("/RecentFiles");
- for (int i=0; i<recentFiles->getNumber(); ++i) {
- QString filename = RS_SETTINGS->readEntry(QString("/File") +
- QString::number(i+1));
- if (!filename.isEmpty()) {
- recentFiles->add(filename);
- }
- }
- RS_SETTINGS->endGroup();
- if (recentFiles->count()>0) {
- updateRecentFilesMenu();
- }
-
- RS_SETTINGS->beginGroup("/Geometry");
- int windowWidth = RS_SETTINGS->readNumEntry("/WindowWidth", 950);
- int windowHeight = RS_SETTINGS->readNumEntry("/WindowHeight", 700);
- int windowX = RS_SETTINGS->readNumEntry("/WindowX", 0);
- int windowY = RS_SETTINGS->readNumEntry("/WindowY", 30);
- RS_SETTINGS->endGroup();
-
-#ifdef __APPLE__
- if (windowY<30) {
- windowY=30;
- }
-#endif
-
- resize(windowWidth, windowHeight);
- move(windowX, windowY);
-
- restoreDocks();
-}
-
-
-/**
- * Restores the position of the dock windows.
- */
-void QC_ApplicationWindow::restoreDocks() {
- RS_SETTINGS->beginGroup("/Geometry");
- QString docks = RS_SETTINGS->readEntry("/DockWindows", "");
- RS_SETTINGS->endGroup();
-
- QTextStream ts(&docks, IO_ReadOnly);
- ts >> *this;
-}
-
-
-/**
- * Stores the global application settings to file or registry.
- */
-void QC_ApplicationWindow::storeSettings() {
- RS_DEBUG->print("QC_ApplicationWindow::storeSettings()");
- QString docks;
- QTextStream ts(&docks, IO_WriteOnly);
-
- RS_SETTINGS->beginGroup("/RecentFiles");
- for (int i=0; i<recentFiles->count(); ++i) {
- RS_SETTINGS->writeEntry(QString("/File") +
- QString::number(i+1), recentFiles->get(i));
- }
- RS_SETTINGS->endGroup();
-
- RS_SETTINGS->beginGroup("/Geometry");
- RS_SETTINGS->writeEntry("/WindowWidth", width());
- RS_SETTINGS->writeEntry("/WindowHeight", height());
- RS_SETTINGS->writeEntry("/WindowX", x());
- RS_SETTINGS->writeEntry("/WindowY", y());
- ts << *this;
- RS_SETTINGS->writeEntry("/DockWindows", docks);
- RS_SETTINGS->endGroup();
-
- RS_DEBUG->print("QC_ApplicationWindow::storeSettings(): OK");
-}
-
-
-
-/**
- * Initializes the view.
- */
-void QC_ApplicationWindow::initView() {
- RS_DEBUG->print("QC_ApplicationWindow::initView()");
-
- RS_DEBUG->print("init view..");
- QDockWindow* dw;
- layerWidget = NULL;
- blockWidget = NULL;
- libraryWidget = NULL;
- commandWidget = NULL;
-#ifdef RS_CAM
-
- simulationControls = NULL;
-#endif
-
-#if QT_VERSION>=0x030000
-
-#ifdef RS_CAM
-
- RS_DEBUG->print(" simulation widget..");
- dw = new QDockWindow(QDockWindow::InDock, this, "Simulation");
- simulationControls = new RS_SimulationControls(dw, "Simulation");
- simulationControls->setFocusPolicy(QWidget::NoFocus);
- connect(simulationControls, SIGNAL(escape()),
- this, SLOT(slotFocus()));
- connect(this, SIGNAL(windowsChanged(bool)),
- simulationControls, SLOT(setEnabled(bool)));
- dw->setWidget(simulationControls);
- dw->resize(240, 80);
- dw->setResizeEnabled(true);
- dw->setFixedExtentWidth(120);
- //dw->setFixedExtentHeight(80);
- //dw->setFixedExtentHeight(400);
- dw->setFixedHeight(80);
- dw->setCaption(tr("Simulation Controls"));
- dw->setCloseMode(QDockWindow::Always);
- //dw->resize(120,workspace->height()/2);
- addDockWindow(dw, DockRight);
- simulationDockWindow = dw;
- //simulationDockWindow->hide();
-#endif
-
- RS_DEBUG->print(" layer widget..");
- dw = new QDockWindow(QDockWindow::InDock, this, "Layer");
- layerWidget = new QG_LayerWidget(actionHandler, dw, "Layer");
- layerWidget->setFocusPolicy(QWidget::NoFocus);
- connect(layerWidget, SIGNAL(escape()),
- this, SLOT(slotFocus()));
- connect(this, SIGNAL(windowsChanged(bool)),
- layerWidget, SLOT(setEnabled(bool)));
- //dw->boxLayout()->addWidget(layerWidget);
- dw->setWidget(layerWidget);
- dw->setFixedExtentWidth(120);
- //dw->setFixedExtentHeight(400);
- //dw->setFixedHeight(400);
- dw->setResizeEnabled(true);
- dw->setCaption(tr("Layer List"));
- dw->setCloseMode(QDockWindow::Always);
- //dw->resize(120,workspace->height()/2);
- addDockWindow(dw, DockRight);
- layerDockWindow = dw;
-
- RS_DEBUG->print(" block widget..");
- dw = new QDockWindow(QDockWindow::InDock, this, "Block");
- dw->setResizeEnabled(true);
- blockWidget = new QG_BlockWidget(actionHandler, dw, "Block");
- blockWidget->setFocusPolicy(QWidget::NoFocus);
- connect(blockWidget, SIGNAL(escape()),
- this, SLOT(slotFocus()));
- connect(this, SIGNAL(windowsChanged(bool)),
- blockWidget, SLOT(setEnabled(bool)));
- //dw->boxLayout()->addWidget(blockWidget);
- dw->setWidget(blockWidget);
- dw->setFixedExtentWidth(120);
- dw->setCaption(tr("Block List"));
- dw->setCloseMode(QDockWindow::Always);
- //dw->setFixedExtentHeight(400);
- addDockWindow(dw, DockRight);
- blockDockWindow = dw;
-
- RS_DEBUG->print(" library widget..");
- dw = new QDockWindow(QDockWindow::OutsideDock, this, "Library");
- libraryWidget = new QG_LibraryWidget(dw, "Library");
- libraryWidget->setActionHandler(actionHandler);
- libraryWidget->setFocusPolicy(QWidget::NoFocus);
- connect(libraryWidget, SIGNAL(escape()),
- this, SLOT(slotFocus()));
- connect(this, SIGNAL(windowsChanged(bool)),
- (QObject*)libraryWidget->bInsert, SLOT(setEnabled(bool)));
- dw->setWidget(libraryWidget);
- //dw->setFixedExtentWidth(240);
- //dw->setHeight(400);
- dw->resize(240, 400);
- dw->setResizeEnabled(true);
- dw->setCaption(tr("Library Browser"));
- dw->setCloseMode(QDockWindow::Always);
- addDockWindow(dw, DockTornOff);
- libraryDockWindow = dw;
- libraryDockWindow->hide();
-
- RS_DEBUG->print(" command widget..");
- dw = new QDockWindow(QDockWindow::InDock, this, "Command");
- dw->setResizeEnabled(true);
- commandWidget = new QG_CommandWidget(dw, "Command");
- commandWidget->setActionHandler(actionHandler);
- //commandWidget->redirectStderr();
- //std::cerr << "Ready.\n";
- //commandWidget->processStderr();
- connect(this, SIGNAL(windowsChanged(bool)),
- commandWidget, SLOT(setEnabled(bool)));
- //connect(commandWidget, SIGNAL(escape()),
- // this, SLOT(slotFocus()));
- //commandWidget->grabKeyboard();
- //dw->boxLayout()->addWidget(commandWidget);
- dw->setWidget(commandWidget);
- //dw->setFixedExtentWidth(120);
- dw->setFixedExtentHeight(45);
- dw->setCaption(tr("Command line"));
- dw->setCloseMode(QDockWindow::Always);
- commandDockWindow = dw;
- addDockWindow(dw, DockBottom);
-
-
-#endif
-
- RS_DEBUG->print(" done");
-}
-
-
-
-/**
- * Creates a new toolbar.
- * Implementation from QG_MainWindowInterface.
- * Can be called from scripts to add individual GUI elements.
- */
-/*QToolBar* QC_ApplicationWindow::createToolBar(const RS_String& name) {
- QToolBar* tb = new QToolBar(this, name);
- tb->setLabel(name);
- return tb;
-}*/
-
-
-
-/**
- * Creates a new button in the given tool bar for running a script.
- */
-/*void QC_ApplicationWindow::addToolBarButton(QToolBar* tb) {
- if (tb!=NULL) {
- QAction* action = new QAction("Blah",
- QPixmap::fromMimeSource("zoomwindow.png"),
- "&Blah", QKeySequence(), NULL);
- action->setStatusTip("Blah blah");
- action->addTo(tb);
- }
-}*/
-
-
-
-/**
- * Updates the recent file list in the file menu.
- */
-void QC_ApplicationWindow::updateRecentFilesMenu() {
- RS_DEBUG->print("QC_ApplicationWindow::updateRecentFilesMenu()");
-
- RS_DEBUG->print("Updating recent file menu...");
- for (int i=0; i<recentFiles->getNumber(); ++i) {
- QString label = QString( "&%1 %2" ).
- arg(i+1).arg(recentFiles->get(i));
-
- if (fileMenu->findItem(i)) {
- RS_DEBUG->print("Changeing item %d", i);
- fileMenu->changeItem(i, label);
- } else if (i < int(recentFiles->count())) {
- RS_DEBUG->print("Adding item %d", i);
- fileMenu->insertItem(label,
- this, SLOT(slotFileOpenRecent(int)),
- 0, i);
- }
- }
-}
-
-
-
-/**
- * Goes back to the previous menu or one step in the current action.
- */
-void QC_ApplicationWindow::slotBack() {
- RS_GraphicView* graphicView = getGraphicView();
- if (graphicView!=NULL) {
- graphicView->back();
- } else {
- if (cadToolBar!=NULL) {
- cadToolBar->showToolBar(RS2::ToolBarMain);
- }
- }
-}
-
-
-
-/**
- * Goes one step further in the current action.
- */
-void QC_ApplicationWindow::slotEnter() {
-
- if (commandWidget==NULL || !commandWidget->checkFocus()) {
- if (cadToolBar!=NULL) {
- cadToolBar->forceNext();
- } else {
- RS_GraphicView* graphicView = getGraphicView();
- if (graphicView!=NULL) {
- graphicView->enter();
- }
- }
- }
-}
-
-
-
-/**
- * Sets the keyboard focus on the command line.
- */
-void QC_ApplicationWindow::slotFocusCommandLine() {
- if (commandWidget->isVisible()) {
- commandWidget->setFocus();
- }
-}
-
-
-/**
- * Shows the given error on the command line.
- */
-void QC_ApplicationWindow::slotError(const QString& msg) {
- commandWidget->appendHistory(msg);
-}
-
-
-
-/**
- * Hands focus back to the application window. In the rare event
- * of a escape press from the layer widget (e.g after switching desktops
- * in XP).
- */
-void QC_ApplicationWindow::slotFocus() {
- //QG_GraphicView* graphicView = getGraphicView();
- /*if (graphicView!=NULL) {
- graphicView->setFocus();
-}
- else {*/
- setFocus();
- //}
-}
-
-
-/**
- * Called when a document window was activated.
- */
-void QC_ApplicationWindow::slotWindowActivated(QWidget*) {
-
- RS_DEBUG->print("QC_ApplicationWindow::slotWindowActivated begin");
-
- QC_MDIWindow* m = getMDIWindow();
-
- if (m!=NULL && m->getDocument()!=NULL) {
- //m->setWindowState(WindowMaximized);
-
- RS_DEBUG->print("QC_ApplicationWindow::slotWindowActivated: "
- "document: %d", m->getDocument()->getId());
-
- bool showByBlock = m->getDocument()->rtti()==RS2::EntityBlock;
-
- layerWidget->setLayerList(m->getDocument()->getLayerList(),
- showByBlock);
-
-
- coordinateWidget->setGraphic(m->getGraphic());
-
-#ifdef RS_CAM
-
- simulationControls->setGraphicView(m->getGraphicView());
-#endif
-
- // Only graphics show blocks. (blocks don't)
- if (m->getDocument()->rtti()==RS2::EntityGraphic) {
- blockWidget->setBlockList(m->getDocument()->getBlockList());
- } else {
- blockWidget->setBlockList(NULL);
- }
-
- // Update all inserts in this graphic (blocks might have changed):
- m->getDocument()->updateInserts();
- m->getGraphicView()->redraw();
-
- // set snapmode from snapping menu
- actionHandler->updateSnapMode();
-
- // set pen from pen toolbar
- slotPenChanged(penToolBar->getPen());
-
- // update toggle button status:
- if (m->getGraphic()!=NULL) {
- emit(gridChanged(m->getGraphic()->isGridOn()));
- emit(printPreviewChanged(m->getGraphicView()->isPrintPreview()));
- }
- }
-
- // Disable/Enable menu and toolbar items
- emit windowsChanged(m!=NULL && m->getDocument()!=NULL);
-
- RS_DEBUG->print("QC_ApplicationWindow::slotWindowActivated end");
-}
-
-
-
-/**
- * Called when the menu 'windows' is about to be shown.
- * This is used to update the window list in the menu.
- */
-void QC_ApplicationWindow::slotWindowsMenuAboutToShow() {
-
- RS_DEBUG->print("QC_ApplicationWindow::slotWindowsMenuAboutToShow");
-
- windowsMenu->clear();
- int cascadeId = windowsMenu->insertItem(tr("&Cascade"),
- workspace, SLOT(cascade()));
- int tileId = windowsMenu->insertItem(tr("&Tile"),
- this, SLOT(slotTileVertical()));
- int horTileId = windowsMenu->insertItem(tr("Tile &Horizontally"),
- this, SLOT(slotTileHorizontal()));
- if (workspace->windowList().isEmpty()) {
- windowsMenu->setItemEnabled(cascadeId, false);
- windowsMenu->setItemEnabled(tileId, false);
- windowsMenu->setItemEnabled(horTileId, false);
- }
- windowsMenu->insertSeparator();
- QWidgetList windows = workspace->windowList();
- for (int i=0; i<int(windows.count()); ++i) {
- int id = windowsMenu->insertItem(windows.at(i)->caption(),
- this, SLOT(slotWindowsMenuActivated(int)));
- windowsMenu->setItemParameter(id, i);
- windowsMenu->setItemChecked(id, workspace->activeWindow()==windows.at(i));
- }
-}
-
-
-
-/**
- * Called when the user selects a document window from the
- * window list.
- */
-void QC_ApplicationWindow::slotWindowsMenuActivated(int id) {
- RS_DEBUG->print("QC_ApplicationWindow::slotWindowsMenuActivated");
-
- QWidget* w = workspace->windowList().at(id);
- if (w!=NULL) {
- w->showNormal();
- //w->setFocus();
- }
-}
-
-
-
-/**
- * Tiles MDI windows horizontally.
- */
-void QC_ApplicationWindow::slotTileHorizontal() {
-
- RS_DEBUG->print("QC_ApplicationWindow::slotTileHorizontal");
-
- // primitive horizontal tiling
- QWidgetList windows = workspace->windowList();
- if (windows.count()==0) {
- return;
- }
-
- int heightForEach = workspace->height() / windows.count();
- int y = 0;
- for (int i=0; i<int(windows.count()); ++i) {
- QWidget *window = windows.at(i);
- if (window->testWState(WState_Maximized)) {
- // prevent flicker
- window->hide();
- window->showNormal();
- }
- int preferredHeight = window->minimumHeight()
- + window->parentWidget()->baseSize().height();
- int actHeight = QMAX(heightForEach, preferredHeight);
-
- //window->parentWidget()->resize(workspace->width(), actHeight);
- window->parentWidget()->setGeometry(0, y,
- workspace->width(), actHeight);
- y+=actHeight;
- }
-}
-
-
-
-/**
- * Tiles MDI windows vertically.
- */
-void QC_ApplicationWindow::slotTileVertical() {
- workspace->tile();
-
- /*
- QWidgetList windows = workspace->windowList();
- if (windows.count()==0) {
- return;
- }
-
- //int heightForEach = workspace->height() / windows.count();
- //int y = 0;
- for (int i=0; i<int(windows.count()); ++i) {
- QWidget *window = windows.at(i);
- if (window->testWState(WState_Maximized)) {
- // prevent flicker
- window->hide();
- window->showNormal();
- }
- //int preferredHeight = window->minimumHeight()
- // + window->parentWidget()->baseSize().height();
- //int actHeight = QMAX(heightForEach, preferredHeight);
-
- //window->parentWidget()->setGeometry(0, y,
- // workspace->width(), actHeight);
- //window->parentWidget()->resize(window->parentWidget()->width(),
- // window->parentWidget()->height());
- //window->resize(window->width(), window->height());
- //y+=actHeight;
- }
- */
-}
-
-
-
-/**
- * CAM
- */
-/*
-#ifdef RS_CAM
-void QC_ApplicationWindow::slotCamExportAuto() {
- printf("CAM export..\n");
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- RS_Graphic* graphic = (RS_Graphic*)d;
-
- RS_CamDialog dlg(graphic, this);
- dlg.exec();
- }
-}
-#endif
-*/
-
-
-
-/**
- * Called when something changed in the pen tool bar
- * (e.g. color, width, style).
- */
-void QC_ApplicationWindow::slotPenChanged(RS_Pen pen) {
- RS_DEBUG->print("QC_ApplicationWindow::slotPenChanged() begin");
-
- RS_DEBUG->print("Setting active pen...");
-
- QC_MDIWindow* m = getMDIWindow();
- if (m!=NULL) {
- m->slotPenChanged(pen);
- }
-
- RS_DEBUG->print("QC_ApplicationWindow::slotPenChanged() end");
-}
-
-
-
-/**
- * Creates a new MDI window with the given document or a new
- * document if 'doc' is NULL.
- */
-QC_MDIWindow* QC_ApplicationWindow::slotFileNew(RS_Document* doc) {
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileNew() begin");
-
- static int id = 0;
- id++;
-
- statusBar()->message(tr("Creating new file..."));
-
- RS_DEBUG->print(" creating MDI window");
- QC_MDIWindow* w = new QC_MDIWindow(doc, workspace,
- 0, WDestructiveClose);
- //w->setWindowState(WindowMaximized);
- connect(w, SIGNAL(signalClosing()),
- this, SLOT(slotFileClosing()));
-
- if (w->getDocument()->rtti()==RS2::EntityBlock) {
- w->setCaption(tr("Block '%1'").arg(((RS_Block*)(w->getDocument()))->getName()));
- } else {
- w->setCaption(tr("unnamed document %1").arg(id));
- }
- w->setIcon(QPixmap::fromMimeSource("document.png"));
-
- // only graphics offer block lists, blocks don't
- RS_DEBUG->print(" adding listeners");
- RS_Graphic* graphic = w->getDocument()->getGraphic();
- if (graphic!=NULL) {
- // Link the graphic's layer list to the pen tool bar
- graphic->addLayerListListener(penToolBar);
- // Link the layer list to the layer widget
- graphic->addLayerListListener(layerWidget);
-
- // Link the block list to the block widget
- graphic->addBlockListListener(blockWidget);
- }
-
- // Link the dialog factory to the mouse widget:
- QG_DIALOGFACTORY->setMouseWidget(mouseWidget);
- // Link the dialog factory to the coordinate widget:
- QG_DIALOGFACTORY->setCoordinateWidget(coordinateWidget);
- QG_DIALOGFACTORY->setSelectionWidget(selectionWidget);
- // Link the dialog factory to the option widget:
- //QG_DIALOGFACTORY->setOptionWidget(optionWidget);
- // Link the dialog factory to the cad tool bar:
- QG_DIALOGFACTORY->setCadToolBar(cadToolBar);
- // Link the dialog factory to the command widget:
- QG_DIALOGFACTORY->setCommandWidget(commandWidget);
- // Link the dialog factory to the main app window:
- QG_DIALOGFACTORY->setMainWindow(this);
-
- RS_DEBUG->print(" showing MDI window");
- if (workspace->windowList().isEmpty()) {
- w->showMaximized();
- } else {
- w->show();
- }
- slotWindowActivated(w);
- statusBar()->message(tr("New Drawing created."), 2000);
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileNew() OK");
- setFocus();
-
- return w;
-}
-
-
-
-/**
- * Menu file -> open.
- */
-void QC_ApplicationWindow::slotFileOpen() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen()");
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen() 001");
- RS2::FormatType type = RS2::FormatUnknown;
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen() 002");
- QString fileName = QG_FileDialog::getOpenFileName(this, &type);
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen() 003");
- slotFileOpen(fileName, type);
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen(): OK");
-}
-
-
-
-/**
- * Called when a recently opened file is chosen from the list in the
- * file menu.
- */
-void QC_ApplicationWindow::slotFileOpenRecent(int id) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpenRecent()");
-
- statusBar()->message(tr("Opening recent file..."));
- QString fileName = recentFiles->get(id);
-
- if (fileName.endsWith(" (DXF 1)")) {
- slotFileOpen(fileName.left(fileName.length()-8), RS2::FormatDXF1);
- } else {
- slotFileOpen(fileName, RS2::FormatUnknown);
- }
-}
-
-
-
-/**
- * Menu file -> open.
- */
-void QC_ApplicationWindow::slotFileOpen(const QString& fileName,
- RS2::FormatType type) {
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen(..)");
-
- QApplication::setOverrideCursor( QCursor(Qt::WaitCursor) );
- if (!fileName.isEmpty()) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: creating new doc window");
- // Create new document window:
- QC_MDIWindow* w = slotFileNew();
- RS_APP->processEvents(1000);
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: linking layer list");
- // link the layer widget to the new document:
- layerWidget->setLayerList(w->getDocument()->getLayerList(), false);
- // link the block widget to the new document:
- blockWidget->setBlockList(w->getDocument()->getBlockList());
- // link coordinate widget to graphic
- coordinateWidget->setGraphic(w->getGraphic());
-#ifdef RS_CAM
- // link the layer widget to the new document:
- simulationControls->setGraphicView(w->getGraphicView());
-#endif
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: open file");
-
- RS_APP->processEvents(1000);
-
- // open the file in the new view:
- if (w->slotFileOpen(fileName, type)==false) {
- // error
- QApplication::restoreOverrideCursor();
- QMessageBox::information(this, QMessageBox::tr("Warning"),
- tr("Cannot open the file\n%1\nPlease "
- "check the permissions.")
- .arg(fileName),
- QMessageBox::Ok);
- w->setForceClosing(true);
- w->close();
- return;
- }
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: open file: OK");
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: update recent file menu: 1");
-
- // update recent files menu:
- if (type==RS2::FormatDXF1) {
- recentFiles->add(fileName + " (DXF 1)");
- } else {
- recentFiles->add(fileName);
- }
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: update recent file menu: 2");
- updateRecentFilesMenu();
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: update recent file menu: OK");
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: set caption");
- // update caption:
- w->setCaption(fileName);
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: set caption: OK");
-
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: update coordinate widget");
- // update coordinate widget format:
- RS_DIALOGFACTORY->updateCoordinateWidget(RS_Vector(0.0,0.0),
- RS_Vector(0.0,0.0),
- true);
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen: update coordinate widget: OK");
-
- // show output of filter (if any):
- commandWidget->processStderr();
- QString message=tr("Loaded document: ")+fileName;
- commandWidget->appendHistory(message);
- statusBar()->message(message, 2000);
- } else {
- statusBar()->message(tr("Opening aborted"), 2000);
- }
- QApplication::restoreOverrideCursor();
- RS_DEBUG->print("QC_ApplicationWindow::slotFileOpen(..) OK");
-}
-
-
-
-/**
- * Menu file -> save.
- */
-void QC_ApplicationWindow::slotFileSave() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileSave()");
-
- statusBar()->message(tr("Saving drawing..."));
-
- QC_MDIWindow* w = getMDIWindow();
- QString name;
- if (w!=NULL) {
- if (w->getDocument()->getFilename().isEmpty()) {
- slotFileSaveAs();
- } else {
- bool cancelled;
- if (w->slotFileSave(cancelled)) {
- if (!cancelled) {
- name = w->getDocument()->getFilename();
- statusBar()->message(tr("Saved drawing: %1").arg(name), 2000);
- }
- } else {
- // error
- QMessageBox::information(this, QMessageBox::tr("Warning"),
- tr("Cannot save the file\n%1\nPlease "
- "check the permissions.")
- .arg(w->getDocument()->getFilename()),
- QMessageBox::Ok);
- }
- }
- }
-}
-
-
-
-/**
- * Menu file -> save as.
- */
-void QC_ApplicationWindow::slotFileSaveAs() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileSaveAs()");
-
- statusBar()->message(tr("Saving drawing under new filename..."));
-
- QC_MDIWindow* w = getMDIWindow();
- QString name;
- if (w!=NULL) {
- bool cancelled;
- if (w->slotFileSaveAs(cancelled)) {
- if (!cancelled) {
- name = w->getDocument()->getFilename();
- recentFiles->add(name);
- w->setCaption(name);
- }
- } else {
- // error
- QMessageBox::information(this, QMessageBox::tr("Warning"),
- tr("Cannot save the file\n%1\nPlease "
- "check the permissions.")
- .arg(w->getDocument()->getFilename()),
- QMessageBox::Ok);
- }
- }
- updateRecentFilesMenu();
-
- QString message = tr("Saved drawing: %1").arg(name);
- statusBar()->message(message, 2000);
- commandWidget->appendHistory(message);
-}
-
-
-
-/**
- * Menu file -> export.
- */
-void QC_ApplicationWindow::slotFileExport() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileExport()");
-
- statusBar()->message(tr("Exporting drawing..."));
-
- QC_MDIWindow* w = getMDIWindow();
- QString fn;
- if (w!=NULL) {
-
- // read default settings:
- RS_SETTINGS->beginGroup("/Paths");
- RS_String defDir = RS_SETTINGS->readEntry("/ExportImage",
- RS_SYSTEM->getHomeDir());
- RS_String defFilter = RS_SETTINGS->readEntry("/ExportImageFilter",
- "Portable Network Graphic (*.png)");
- RS_SETTINGS->endGroup();
-
- bool cancel = false;
-
- QFileDialog fileDlg(NULL, "", true);
-
- QStrList f = QImageIO::outputFormats();
- QStringList formats = QStringList::fromStrList(f);
- QStringList filters;
- //QString all = "";
-
- for (QStringList::Iterator it = formats.begin();
- it!=formats.end(); ++it) {
-
- QString st;
- if ((*it)=="JPEG") {
- st = QString("%1 (*.%2 *.jpg)")
- .arg(QG_DialogFactory::extToFormat(*it))
- .arg(QString(*it).lower());
- } else {
- st = QString("%1 (*.%2)")
- .arg(QG_DialogFactory::extToFormat(*it))
- .arg(QString(*it).lower());
- }
- filters.append(st);
-
- //if (!all.isEmpty()) {
- // all += " ";
- //}
- //all += QString("*.%1").arg(QString(*it).lower());
- }
-
- fileDlg.setFilters(filters);
- fileDlg.setMode(QFileDialog::AnyFile);
- fileDlg.setCaption(QObject::tr("Export Image"));
- fileDlg.setDir(defDir);
- fileDlg.setSelectedFilter(defFilter);
-
- if (fileDlg.exec()==QDialog::Accepted) {
- fn = fileDlg.selectedFile();
- cancel = false;
- } else {
- cancel = true;
- }
-
- // store new default settings:
- if (!cancel) {
- RS_SETTINGS->beginGroup("/Paths");
- RS_SETTINGS->writeEntry("/ExportImage", QFileInfo(fn).dirPath(true));
- RS_SETTINGS->writeEntry("/ExportImageFilter",
- fileDlg.selectedFilter());
- RS_SETTINGS->endGroup();
-
- // find out extension:
- QString filter = fileDlg.selectedFilter();
- QString format = "";
- int i = filter.find("(*.");
- if (i!=-1) {
- int i2 = filter.find(QRegExp("[) ]"), i);
- format = filter.mid(i+3, i2-(i+3));
- format = format.upper();
- }
-
- // append extension to file:
- if (!QFileInfo(fn).fileName().contains(".")) {
- fn.append("." + format.lower());
- }
-
- // show options dialog:
- QG_ImageOptionsDialog dlg(this);
- dlg.setGraphicSize(w->getGraphic()->getSize());
- if (dlg.exec()) {
- bool ret = slotFileExport(fn, format, dlg.getSize(),
- dlg.isBackgroundBlack());
- if (ret) {
- QString message = tr("Exported: %1").arg(fn);
- statusBar()->message(message, 2000);
- commandWidget->appendHistory(message);
- }
- }
- }
- }
-
-}
-
-
-
-/**
- * Exports the drawing as a bitmap.
- *
- * @param name File name.
- * @param format File format (e.g. "png")
- * @param size Size of the bitmap in pixel
- * @param black true: Black background, false: white
- * @param bw true: black/white export, false: color
- */
-bool QC_ApplicationWindow::slotFileExport(const QString& name,
- const QString& format, QSize size, bool black, bool bw) {
-
- QC_MDIWindow* w = getMDIWindow();
- if (w==NULL) {
- RS_DEBUG->print(RS_Debug::D_WARNING,
- "QC_ApplicationWindow::slotFileExport: "
- "no window opened");
- return false;
- }
-
- RS_Graphic* graphic = w->getDocument()->getGraphic();
- if (graphic==NULL) {
- RS_DEBUG->print(RS_Debug::D_WARNING,
- "QC_ApplicationWindow::slotFileExport: "
- "no graphic");
- return false;
- }
-
- statusBar()->message(tr("Exporting..."));
- QApplication::setOverrideCursor( QCursor(Qt::WaitCursor) );
-
- bool ret = false;
- QPixmap* buffer = new QPixmap(size);
- RS_PainterQt* painter = new RS_PainterQt(buffer);
-
- // black background:
- if (black) {
- painter->setBackgroundColor(RS_Color(0,0,0));
- }
- // white background:
- else {
- painter->setBackgroundColor(RS_Color(255,255,255));
- }
-
- // black/white:
- if (bw) {
- painter->setDrawingMode(RS2::ModeBW);
- }
-
- painter->eraseRect(0,0, size.width(), size.height());
-
- RS_StaticGraphicView gv(size.width(), size.height(), painter);
- if (black) {
- gv.setBackground(RS_Color(0,0,0));
- } else {
- gv.setBackground(RS_Color(255,255,255));
- }
- gv.setContainer(graphic);
- gv.zoomAuto(false);
- gv.drawEntity(graphic, true);
-
- QImageIO iio;
- QImage img;
- img = *buffer;
- iio.setImage(img);
- iio.setFileName(name);
- iio.setFormat(format);
- if (iio.write()) {
- ret = true;
- }
- QApplication::restoreOverrideCursor();
-
- // GraphicView deletes painter
- painter->end();
- delete buffer;
-
- if (ret) {
- statusBar()->message(tr("Export complete"), 2000);
- } else {
- statusBar()->message(tr("Export failed!"), 2000);
- }
-
- return ret;
-}
-
-
-/**
- * Menu file -> close.
- */
-void QC_ApplicationWindow::slotFileClose() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileClose()");
-
- QC_MDIWindow* m = getMDIWindow();
- if (m!=NULL) {
- m->close(true);
- }
-
- /*
- m = getMDIWindow();
- if (m!=NULL) {
- //m->showMaximized();
- m->setWindowState(WindowMaximized);
- }
- */
-}
-
-
-
-/**
- * Called when a MDI window is actually about to close. Used to
- * detach widgets from the document.
- */
-void QC_ApplicationWindow::slotFileClosing() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileClosing()");
-
- RS_DEBUG->print("detaching lists");
- layerWidget->setLayerList(NULL, false);
- blockWidget->setBlockList(NULL);
- coordinateWidget->setGraphic(NULL);
-#ifdef RS_CAM
-
- simulationControls->setGraphicView(NULL);
-#endif
-}
-
-
-
-/**
- * Menu file -> print.
- */
-void QC_ApplicationWindow::slotFilePrint() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFilePrint()");
-
- QC_MDIWindow* w = getMDIWindow();
- if (w==NULL) {
- RS_DEBUG->print(RS_Debug::D_WARNING,
- "QC_ApplicationWindow::slotFilePrint: "
- "no window opened");
- return;
- }
-
- RS_Graphic* graphic = w->getDocument()->getGraphic();
- if (graphic==NULL) {
- RS_DEBUG->print(RS_Debug::D_WARNING,
- "QC_ApplicationWindow::slotFilePrint: "
- "no graphic");
- return;
- }
-
- statusBar()->message(tr("Printing..."));
- QPrinter* printer;
- printer = new QPrinter(QPrinter::HighResolution);
- bool landscape = false;
- printer->setPageSize(RS2::rsToQtPaperFormat(graphic->getPaperFormat(&landscape)));
- if (landscape) {
- printer->setOrientation(QPrinter::Landscape);
- } else {
- printer->setOrientation(QPrinter::Portrait);
- }
-
- RS_SETTINGS->beginGroup("/Print");
- printer->setOutputFileName(RS_SETTINGS->readEntry("/FileName", ""));
- printer->setColorMode((QPrinter::ColorMode)RS_SETTINGS->readNumEntry("/ColorMode", (int)QPrinter::Color));
- printer->setOutputToFile((bool)RS_SETTINGS->readNumEntry("/PrintToFile",
- 0));
- RS_SETTINGS->endGroup();
-
- // printer setup:
- if (printer->setup(this)) {
- //printer->setOutputToFile(true);
- //printer->setOutputFileName(outputFile);
-
- QApplication::setOverrideCursor( QCursor(Qt::WaitCursor) );
- printer->setFullPage(true);
- QPaintDeviceMetrics metr(printer);
-
- RS_PainterQt* painter = new RS_PainterQt(printer);
- painter->setDrawingMode(w->getGraphicView()->getDrawingMode());
-
- RS_StaticGraphicView gv(metr.width(), metr.height(), painter);
- gv.setPrinting(true);
- gv.setBorders(0,0,0,0);
-
- double fx = (double)metr.width() / metr.widthMM()
- * RS_Units::getFactorToMM(graphic->getUnit());
- double fy = (double)metr.height() / metr.heightMM()
- * RS_Units::getFactorToMM(graphic->getUnit());
-
- double f = (fx+fy)/2;
-
- double scale = graphic->getPaperScale();
-
- gv.setOffset((int)(graphic->getPaperInsertionBase().x * f),
- (int)(graphic->getPaperInsertionBase().y * f));
- gv.setFactor(f*scale);
-
- gv.setContainer(graphic);
-
- gv.drawEntity(graphic, true);
-
- // GraphicView deletes painter
- painter->end();
-
- RS_SETTINGS->beginGroup("/Print");
- RS_SETTINGS->writeEntry("/PrintToFile", (int)printer->outputToFile());
- RS_SETTINGS->writeEntry("/ColorMode", (int)printer->colorMode());
- RS_SETTINGS->writeEntry("/FileName", printer->outputFileName());
- RS_SETTINGS->endGroup();
- QApplication::restoreOverrideCursor();
- }
-
- delete printer;
-
- statusBar()->message(tr("Printing complete"), 2000);
-}
-
-
-
-/**
- * Menu file -> print preview.
- */
-void QC_ApplicationWindow::slotFilePrintPreview(bool on) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFilePrintPreview()");
-
- RS_DEBUG->print(" creating MDI window");
- QC_MDIWindow* parent = getMDIWindow();
- if (parent==NULL) {
- RS_DEBUG->print(RS_Debug::D_WARNING,
- "QC_ApplicationWindow::slotFilePrintPreview: "
- "no window opened");
- return;
- }
-
- // close print preview:
- if (!on) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFilePrintPreview(): off");
- if (parent->getGraphicView()->isPrintPreview()) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFilePrintPreview(): close");
- slotFileClose();
- }
- }
-
- // open print preview:
- else {
- // look for an existing print preview:
- QC_MDIWindow* ppv = parent->getPrintPreview();
- if (ppv!=NULL) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFilePrintPreview(): show existing");
- slotWindowActivated(ppv);
- ppv->showNormal();
- } else {
- if (!parent->getGraphicView()->isPrintPreview()) {
- RS_DEBUG->print("QC_ApplicationWindow::slotFilePrintPreview(): create");
-
- QC_MDIWindow* w = new QC_MDIWindow(parent->getDocument(), workspace,
- 0, WDestructiveClose);
- parent->addChildWindow(w);
- //connect(w, SIGNAL(signalClosing()),
- // this, SLOT(slotFileClosing()));
-
- w->setCaption(tr("Print preview for %1").arg(parent->caption()));
- w->setIcon(QPixmap::fromMimeSource("document.png"));
- w->getGraphicView()->setPrintPreview(true);
- w->getGraphicView()->setBackground(RS_Color(255,255,255));
- w->getGraphicView()->setDefaultAction(
- new RS_ActionPrintPreview(*w->getDocument(), *w->getGraphicView()));
-
- // only graphics offer block lists, blocks don't
- RS_DEBUG->print(" adding listeners");
- RS_Graphic* graphic = w->getDocument()->getGraphic();
- if (graphic!=NULL) {
- // Link the layer list to the pen tool bar
- graphic->addLayerListListener(penToolBar);
- // Link the layer list to the layer widget
- graphic->addLayerListListener(layerWidget);
-
- // Link the block list to the block widget
- graphic->addBlockListListener(blockWidget);
-
- // Center by default:
- graphic->centerToPage();
- }
-
- // Link the graphic view to the mouse widget:
- QG_DIALOGFACTORY->setMouseWidget(mouseWidget);
- // Link the graphic view to the coordinate widget:
- QG_DIALOGFACTORY->setCoordinateWidget(coordinateWidget);
- QG_DIALOGFACTORY->setSelectionWidget(selectionWidget);
- // Link the graphic view to the option widget:
- //QG_DIALOGFACTORY->setOptionWidget(optionWidget);
- // Link the graphic view to the cad tool bar:
- QG_DIALOGFACTORY->setCadToolBar(cadToolBar);
- // Link the graphic view to the command widget:
- QG_DIALOGFACTORY->setCommandWidget(commandWidget);
-
- RS_DEBUG->print(" showing MDI window");
-
- if (workspace->windowList().isEmpty()) {
- w->showMaximized();
- } else {
- w->show();
- }
- w->getGraphicView()->zoomPage();
- setFocus();
-
- slotWindowActivated(w);
- }
- }
- }
-}
-
-
-
-/**
- * Menu file -> quit.
- */
-void QC_ApplicationWindow::slotFileQuit() {
- RS_DEBUG->print("QC_ApplicationWindow::slotFileQuit()");
-
- statusBar()->message(tr("Exiting application..."));
-
- if (queryExit(false)) {
- qApp->exit(0);
- }
-}
-
-
-/**
- * Forces termination of QCad (demo version).
- */
-void QC_ApplicationWindow::slotFileDemoQuit() {
-
- statusBar()->message(tr("Exiting application..."));
-
- queryExit(true);
- qApp->exit(0);
-}
-
-
-
-/**
- * Shows / hides the grid.
- *
- * @param toggle true: show, false: hide.
- */
-void QC_ApplicationWindow::slotViewGrid(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewGrid()");
-
- QC_MDIWindow* m = getMDIWindow();
- if (m!=NULL) {
- RS_Graphic* g = m->getGraphic();
- if (g!=NULL) {
- g->setGridOn(toggle);
- }
- }
-
- updateGrids();
- redrawAll();
-
- RS_DEBUG->print("QC_ApplicationWindow::slotViewGrid() OK");
-}
-
-
-
-/**
- * Enables / disables the draft mode.
- *
- * @param toggle true: enable, false: disable.
- */
-void QC_ApplicationWindow::slotViewDraft(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewDraft()");
-
- /*QC_MDIWindow* m = getMDIWindow();
- if (m!=NULL) {
- RS_Graphic* g = m->getGraphic();
- if (g!=NULL) {
- g->setDraftOn(toggle);
- }
-}*/
-
- RS_SETTINGS->beginGroup("/Appearance");
- RS_SETTINGS->writeEntry("/DraftMode", (int)toggle);
- RS_SETTINGS->endGroup();
-
- redrawAll();
-}
-
-
-
-/**
- * Redraws all mdi windows.
- */
-void QC_ApplicationWindow::redrawAll() {
- if (workspace!=NULL) {
- QWidgetList windows = workspace->windowList();
- for (int i = 0; i < int(windows.count()); ++i) {
- QC_MDIWindow* m = (QC_MDIWindow*)windows.at(i);
- if (m!=NULL) {
- QG_GraphicView* gv = m->getGraphicView();
- if (gv!=NULL) {
- gv->redraw();
- }
- }
- }
- }
-}
-
-
-
-/**
- * Updates all grids of all graphic views.
- */
-void QC_ApplicationWindow::updateGrids() {
- if (workspace!=NULL) {
- QWidgetList windows = workspace->windowList();
- for (int i = 0; i < int(windows.count()); ++i) {
- QC_MDIWindow* m = (QC_MDIWindow*)windows.at(i);
- if (m!=NULL) {
- QG_GraphicView* gv = m->getGraphicView();
- if (gv!=NULL) {
- gv->updateGrid();
- }
- }
- }
- }
-}
-
-
-
-/**
- * Shows / hides the status bar.
- *
- * @param toggle true: show, false: hide.
- */
-void QC_ApplicationWindow::slotViewStatusBar(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewStatusBar()");
-
- if (toggle==false) {
- statusBar()->hide();
- } else {
- statusBar()->show();
- }
-}
-
-
-
-/**
- * Shows / hides the layer list.
- *
- * @param toggle true: show, false: hide.
- */
-/*void QC_ApplicationWindow::slotViewLayerList(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewLayerList()");
-
- if (toggle==false) {
- layerDockWindow->hide();
- } else {
- layerDockWindow->show();
- }
-}
-*/
-
-
-/**
- * Shows / hides the block list.
- *
- * @param toggle true: show, false: hide.
- */
-/*
-void QC_ApplicationWindow::slotViewBlockList(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewBlockList()");
-
- if (toggle==false) {
- blockDockWindow->hide();
- } else {
- blockDockWindow->show();
- }
-}
-*/
-
-
-
-/**
- * Shows / hides the command line.
- *
- * @param toggle true: show, false: hide.
- */
-/*
-void QC_ApplicationWindow::slotViewCommandLine(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewCommandLine()");
-
- if (toggle==false) {
- commandDockWindow->hide();
- //QG_GraphicView* graphicView = getGraphicView();
- //if (graphicView!=NULL) {
- //graphicView->setFocus();
- //}
- setFocus();
- } else {
- commandDockWindow->show();
- }
-}
-*/
-
-
-
-/**
- * Shows / hides the option toolbar.
- *
- * @param toggle true: show, false: hide.
- */
-/*
-void QC_ApplicationWindow::slotViewOptionToolbar(bool toggle) {
- RS_DEBUG->print("QC_ApplicationWindow::slotViewOptionToolbar()");
-
- if (toggle==false) {
- optionWidget->hide();
- } else {
- optionWidget->show();
- }
-}
-*/
-
-
-/**
- * Creates a new MDI window for editing the selected block.
- */
-/*
-void QC_ApplicationWindow::slotBlocksEdit() {
- RS_DEBUG->print("QC_ApplicationWindow::slotBlocksEdit()");
-
- QC_MDIWindow* parent = getMDIWindow();
- if (parent!=NULL) {
- RS_BlockList* blist = blockWidget->getBlockList();
- if (blist!=NULL) {
- RS_Block* blk = blist->getActiveBlock();
- if (blk!=NULL) {
- QC_MDIWindow* w = slotFileNew(blk);
- // the parent needs a pointer to the block window and
- // vice versa
- parent->addChildWindow(w);
- w->getGraphicView()->zoomAuto();
- }
- }
- }
-}
-*/
-
-
-
-/**
- * Shows the dialog for general application preferences.
- */
-void QC_ApplicationWindow::slotOptionsGeneral() {
- RS_DIALOGFACTORY->requestOptionsGeneralDialog();
-
- // update background color of all open drawings:
- RS_SETTINGS->beginGroup("/Appearance");
- QColor color(RS_SETTINGS->readEntry("/BackgroundColor", "#000000"));
- QColor gridColor(RS_SETTINGS->readEntry("/GridColor", "Gray"));
- QColor metaGridColor(RS_SETTINGS->readEntry("/MetaGridColor", "Darkgray"));
- QColor selectedColor(RS_SETTINGS->readEntry("/SelectedColor", "#A54747"));
- QColor highlightedColor(RS_SETTINGS->readEntry("/HighlightedColor",
- "#739373"));
- RS_SETTINGS->endGroup();
-
- QWidgetList windows = workspace->windowList();
- for (int i = 0; i < int(windows.count()); ++i) {
- QC_MDIWindow* m = (QC_MDIWindow*)windows.at(i);
- if (m!=NULL) {
- QG_GraphicView* gv = m->getGraphicView();
- if (gv!=NULL) {
- gv->setBackground(color);
- gv->setGridColor(gridColor);
- gv->setMetaGridColor(metaGridColor);
- gv->setSelectedColor(selectedColor);
- gv->setHighlightedColor(highlightedColor);
- gv->updateGrid();
- gv->redraw();
- }
- }
- }
-
-}
-
-
-
-/**
- * Menu script -> show ide
- */
-void QC_ApplicationWindow::slotScriptOpenIDE() {
-#ifdef RS_SCRIPTING
- scripter->openIDE();
-#endif
-}
-
-
-
-/**
- * Menu script -> run
- */
-void QC_ApplicationWindow::slotScriptRun() {
-#ifdef RS_SCRIPTING
- scripter->runScript();
-#endif
-}
-
-
-
-/**
- * Menu help -> about.
- */
-void QC_ApplicationWindow::slotHelpAbout() {
- RS_DEBUG->print("QC_ApplicationWindow::slotHelpAbout()");
-
- QString edition;
-
-#ifdef RS_DEMO
- //demo; // = " [Demo]";
-#else
-#ifdef RS_PROF
- edition = " [Professional]";
-#else
- edition = " [Community Edition]";
-#endif
-#endif
-
- QStringList modules;
-
-#ifdef RS_CAM
- modules += "CAM";
-#endif
-
-#ifdef RS_SCRIPTING
- modules += "Scripting";
-#endif
-
- QString modulesString;
-
- if (modules.empty()==false) {
- modulesString = modules.join(", ");
- } else {
- modulesString = tr("None");
- }
-
- QMessageBox box(this);
- box.setCaption(tr("About..."));
- box.setText( QString("<qt>") + // no center for main stream QCad
-#ifdef QC_ABOUT_HEADER
- QString("<center>") +
- QString(QC_ABOUT_HEADER) +
-#else
- "<h2>"+ QC_APPNAME+ "</h2>" +
-#endif
- tr("Version: %1 %2").arg(QC_VERSION).arg(edition) + "<br>" +
- tr("Date: %1").arg(__DATE__) + "<br>" +
- QString("(c) 2001-2005 by RibbonSoft,<br> Andrew Mustun") +
- "<br>" +
- tr("Modules: %1").arg(modulesString) + "<br>" +
- QString("http://www.ribbonsoft.com")
-#ifdef QC_ABOUT_ADD_COMPANY
- + QString("<br>") + QC_ABOUT_ADD_COMPANY
- + QString("</center>")
-#endif
- );
-#ifndef QC_ABOUT_HEADER
- box.setIcon( QPixmap::fromMimeSource(QC_APP_ICON) );
- box.setFixedWidth(340);
- box.setFixedHeight(250);
-#endif
- box.exec();
-}
-
-
-
-/**
- * Menu help -> help.
- */
-void QC_ApplicationWindow::slotHelpManual() {
- RS_DEBUG->print("QC_ApplicationWindow::slotHelpManual()");
-
- if (assistant==NULL) {
- RS_DEBUG->print("QC_ApplicationWindow::slotHelpManual(): appdir: %s",
- RS_SYSTEM->getAppDir().latin1());
- RS_DEBUG->print("QC_ApplicationWindow::slotHelpManual(): appdir: %s",
- RS_SYSTEM->getAppDir().latin1());
- assistant = new QAssistantClient(QString::null, this);
- connect(assistant, SIGNAL(error(const QString&)),
- this, SLOT(slotError(const QString&)));
- QStringList args;
- args << "-profile";
- args << QDir::convertSeparators(RS_SYSTEM->getDocPath() + "/qcaddoc.adp");
-// args << QString("doc") + QDir::separator() + QString("qcaddoc.adp");
-
-#if QT_VERSION>=0x030200
- assistant->setArguments(args);
-#endif
- }
- assistant->openAssistant();
- //assistant->showPage("index.html");
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestDumpEntities(RS_EntityContainer* d) {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestDumpEntities()");
- static int level = 0;
- std::ofstream dumpFile;
-
- if (d==NULL) {
- d = getDocument();
- dumpFile.open("debug_entities.html");
- level = 0;
- } else {
- dumpFile.open("debug_entities.html", std::ios::app);
- level++;
- }
-
- if (d!=NULL) {
- if (level==0) {
- dumpFile << "<html>\n";
- dumpFile << "<body>\n";
- }
-
- for (RS_Entity* e=d->firstEntity();
- e!=NULL;
- e=d->nextEntity()) {
-
- dumpFile << "<table border=\"1\">\n";
- dumpFile << "<tr><td>Entity: " << e->getId()
- << "</td></tr>\n";
-
- dumpFile
- << "<tr><td><table><tr>"
- << "<td>VIS:" << e->isVisible() << "</td>"
- << "<td>UND:" << e->isUndone() << "</td>"
- << "<td>SEL:" << e->isSelected() << "</td>"
- << "<td>TMP:" << e->getFlag(RS2::FlagTemp) << "</td>";
- RS_String lay = "NULL";
- if (e->getLayer()!=NULL) {
- lay = e->getLayer()->getName();
- }
- dumpFile
- << "<td>Layer: " << lay << "</td>"
- << "<td>Width: " << (int)e->getPen(false).getWidth() << "</td>"
- << "<td>Parent: " << e->getParent()->getId() << "</td>"
- << "</tr></table>";
-
- dumpFile
- << "<tr><td>\n";
-
- switch (e->rtti()) {
- case RS2::EntityPoint: {
- RS_Point* p = (RS_Point*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Point:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>"
- << p->getPos()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityLine: {
- RS_Line* l = (RS_Line*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Line:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>"
- << l->getStartpoint()
- << "</td>"
- << "<td>"
- << l->getEndpoint()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityArc: {
- RS_Arc* a = (RS_Arc*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Arc:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>Center: "
- << a->getCenter()
- << "</td>"
- << "<td>Radius: "
- << a->getRadius()
- << "</td>"
- << "<td>Angle 1: "
- << a->getAngle1()
- << "</td>"
- << "<td>Angle 2: "
- << a->getAngle2()
- << "</td>"
- << "<td>Startpoint: "
- << a->getStartpoint()
- << "</td>"
- << "<td>Endpoint: "
- << a->getEndpoint()
- << "</td>"
- << "<td>reversed: "
- << (int)a->isReversed()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityCircle: {
- RS_Circle* c = (RS_Circle*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Circle:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>Center: "
- << c->getCenter()
- << "</td>"
- << "<td>Radius: "
- << c->getRadius()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityDimAligned: {
- RS_DimAligned* d = (RS_DimAligned*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Dimension / Aligned:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>"
- << d->getDefinitionPoint()
- << "</td>"
- << "<td>"
- << d->getExtensionPoint1()
- << "</td>"
- << "<td>"
- << d->getExtensionPoint2()
- << "</td>"
- << "<td>Text: "
- << d->getText().latin1()
- << "</td>"
- << "<td>Label: "
- << d->getLabel().latin1()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityDimLinear: {
- RS_DimLinear* d = (RS_DimLinear*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Dimension / Linear:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>"
- << d->getDefinitionPoint()
- << "</td>"
- << "<td>"
- << d->getExtensionPoint1()
- << "</td>"
- << "<td>"
- << d->getExtensionPoint2()
- << "</td>"
- << "<td>Text: "
- << d->getText()
- << "</td>"
- << "<td>Label: "
- << d->getLabel()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityInsert: {
- RS_Insert* i = (RS_Insert*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Insert:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>Insertion point:"
- << i->getInsertionPoint()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityText: {
- RS_Text* t = (RS_Text*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Text:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>Text:"
- << t->getText().latin1()
- << "</td>"
- << "<td>Height:"
- << t->getHeight()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- case RS2::EntityHatch: {
- RS_Hatch* h = (RS_Hatch*)e;
- dumpFile
- << "<table><tr><td>"
- << "<b>Hatch:</b>"
- << "</td></tr>";
- dumpFile
- << "<tr>"
- << "<td>Pattern:"
- << h->getPattern().latin1()
- << "</td>"
- << "<td>Scale:"
- << h->getScale()
- << "</td>"
- << "<td>Solid:"
- << (int)h->isSolid()
- << "</td>"
- << "</tr></table>";
- }
- break;
-
- default:
- dumpFile
- << "<tr><td>"
- << "<b>Unknown Entity: " << e->rtti() << "</b>"
- << "</td></tr>";
- break;
- }
-
- if (e->isContainer() || e->rtti()==RS2::EntityHatch) {
- RS_EntityContainer* ec = (RS_EntityContainer*)e;
- dumpFile << "<table><tr><td valign=\"top\"> Contents:</td><td>\n";
- dumpFile.close();
- slotTestDumpEntities(ec);
- dumpFile.open("debug_entities.html", std::ios::app);
- dumpFile << "</td></tr></table>\n";
- }
-
- dumpFile
- << "</td></tr>"
- << "</table>\n"
- << "<br><br>";
- }
-
- if (level==0) {
- dumpFile << "</body>\n";
- dumpFile << "</html>\n";
- } else {
- level--;
- }
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestDumpUndo() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestDumpUndo()");
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- std::cout << *(RS_Undo*)d;
- std::cout << std::endl;
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestUpdateInserts() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestUpdateInserts()");
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- d->updateInserts();
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestDrawFreehand() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestDrawFreehand()");
-
-
- //RS_Graphic* g = document->getMarking();
- /*
-
- RS_ActionDrawLineFree* action =
- new RS_ActionDrawLineFree(*document->getGraphic(),
- *graphicView);
-
- for (int i=0; i<100; ++i) {
-
- int posx = (random()%600);
- int posy = (random()%400);
-
- //RS_MouseEvent rsm1(posx, posy, LEFT);
- RS_MouseEvent rsm1(QEvent::MouseButtonPress,
- QPoint(posx,posy),
- RS2::LeftButton,
- RS2::LeftButton);
- action->mousePressEvent(&rsm1);
-
- int speedx = 0;
- int speedy = 0;
-
- for (int k=0; k<100; ++k) {
- int accx = (random()%40)-20;
- int accy = (random()%40)-20;
-
- speedx+=accx;
- speedy+=accy;
-
- posx+=speedx;
- posy+=speedy;
-
- //RS_MouseEvent rsm2(posx, posy, LEFT);
-
- RS_MouseEvent rsm2(QEvent::MouseMove,
- QPoint(posx,posy),
- RS2::LeftButton,
- RS2::LeftButton);
- action->mouseMoveEvent(&rsm2);
- }
-
- action->mouseReleaseEvent(NULL);
-
- slotFileSave();
- }
-
- delete action;
- */
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestInsertBlock() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestInsertBlock()");
-
- RS_Document* d = getDocument();
- if (d!=NULL && d->rtti()==RS2::EntityGraphic) {
- RS_Graphic* graphic = (RS_Graphic*)d;
- if (graphic==NULL) {
- return;
- }
-
- graphic->addLayer(new RS_Layer("default"));
- RS_Block* block = new RS_Block(graphic, RS_BlockData("debugblock",
- RS_Vector(0.0,0.0), true));
-
- RS_Line* line;
- RS_Arc* arc;
- RS_Circle* circle;
-
- // Add one red line:
- line = new RS_Line(block,
- RS_LineData(RS_Vector(0.0,0.0),
- RS_Vector(50.0,0.0)));
- line->setLayerToActive();
- line->setPen(RS_Pen(RS_Color(255, 0, 0),
- RS2::Width01,
- RS2::SolidLine));
- block->addEntity(line);
-
- // Add one line with attributes from block:
- line = new RS_Line(block,
- RS_LineData(RS_Vector(50.0,0.0),
- RS_Vector(50.0,50.0)));
- line->setPen(RS_Pen(RS_Color(RS2::FlagByBlock),
- RS2::WidthByBlock,
- RS2::LineByBlock));
- block->addEntity(line);
-
- // Add one arc with attributes from block:
- RS_ArcData d(RS_Vector(50.0,0.0),
- 50.0, M_PI/2.0, M_PI,
- false);
- arc = new RS_Arc(block, d);
- arc->setPen(RS_Pen(RS_Color(RS2::FlagByBlock),
- RS2::WidthByBlock,
- RS2::LineByBlock));
- block->addEntity(arc);
-
- // Add one blue circle:
- RS_CircleData circleData(RS_Vector(20.0,15.0),
- 12.5);
- circle = new RS_Circle(block, circleData);
- circle->setLayerToActive();
- circle->setPen(RS_Pen(RS_Color(0, 0, 255),
- RS2::Width01,
- RS2::SolidLine));
- block->addEntity(circle);
-
-
- graphic->addBlock(block);
-
-
-
- RS_Insert* ins;
- RS_InsertData insData("debugblock",
- RS_Vector(0.0,0.0),
- RS_Vector(1.0,1.0), 0.0,
- 1, 1, RS_Vector(0.0, 0.0),
- NULL, RS2::NoUpdate);
-
- // insert one magenta instance of the block (original):
- ins = new RS_Insert(graphic, insData);
- ins->setLayerToActive();
- ins->setPen(RS_Pen(RS_Color(255, 0, 255),
- RS2::Width02,
- RS2::SolidLine));
- ins->update();
- graphic->addEntity(ins);
-
- // insert one green instance of the block (rotate):
- insData = RS_InsertData("debugblock",
- RS_Vector(-50.0,20.0),
- RS_Vector(1.0,1.0), 30.0/ARAD,
- 1, 1, RS_Vector(0.0, 0.0),
- NULL, RS2::NoUpdate);
- ins = new RS_Insert(graphic, insData);
- ins->setLayerToActive();
- ins->setPen(RS_Pen(RS_Color(0, 255, 0),
- RS2::Width02,
- RS2::SolidLine));
- ins->update();
- graphic->addEntity(ins);
-
- // insert one cyan instance of the block (move):
- insData = RS_InsertData("debugblock",
- RS_Vector(10.0,20.0),
- RS_Vector(1.0,1.0), 0.0,
- 1, 1, RS_Vector(0.0, 0.0),
- NULL, RS2::NoUpdate);
- ins = new RS_Insert(graphic, insData);
- ins->setLayerToActive();
- ins->setPen(RS_Pen(RS_Color(0, 255, 255),
- RS2::Width02,
- RS2::SolidLine));
- ins->update();
- graphic->addEntity(ins);
-
- // insert one blue instance of the block:
- for (double a=0.0; a<360.0; a+=45.0) {
- insData = RS_InsertData("debugblock",
- RS_Vector(60.0,0.0),
- RS_Vector(2.0/5,2.0/5), a/ARAD,
- 1, 1, RS_Vector(0.0, 0.0),
- NULL, RS2::NoUpdate);
- ins = new RS_Insert(graphic, insData);
- ins->setLayerToActive();
- ins->setPen(RS_Pen(RS_Color(0, 0, 255),
- RS2::Width05,
- RS2::SolidLine));
- ins->update();
- graphic->addEntity(ins);
- }
-
- // insert an array of yellow instances of the block:
- insData = RS_InsertData("debugblock",
- RS_Vector(-100.0,-100.0),
- RS_Vector(0.2,0.2), M_PI/6.0,
- 6, 4, RS_Vector(100.0, 100.0),
- NULL, RS2::NoUpdate);
- ins = new RS_Insert(graphic, insData);
- ins->setLayerToActive();
- ins->setPen(RS_Pen(RS_Color(255, 255, 0),
- RS2::Width01,
- RS2::SolidLine));
- ins->update();
- graphic->addEntity(ins);
-
-
- RS_GraphicView* v = getGraphicView();
- if (v!=NULL) {
- v->redraw();
- }
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestInsertEllipse() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestInsertEllipse()");
-
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- RS_Graphic* graphic = (RS_Graphic*)d;
- if (graphic==NULL) {
- return;
- }
-
- RS_Ellipse* ellipse;
- RS_Line* line;
-
- for (double a=0.0; a<2*M_PI; a+=0.1) {
- RS_Vector v;
- v.setPolar(50.0, a);
- double xp = 1000.0*a;
-
- RS_EllipseData ellipseData(RS_Vector(xp,0.0),
- v,
- 0.5,
- 0.0, 2*M_PI,
- false);
- ellipse = new RS_Ellipse(graphic, ellipseData);
-
- ellipse->setPen(RS_Pen(RS_Color(255, 0, 255),
- RS2::Width01,
- RS2::SolidLine));
-
- graphic->addEntity(ellipse);
- //graphic->addEntity(new RS_Point(graphic, ellipse->getMax()));
- //graphic->addEntity(new RS_Point(graphic, ellipse->getMin()));
-
- line = new RS_Line(graphic,
- RS_LineData(RS_Vector(xp,0.0),
- RS_Vector(xp,0.0)+v));
- line->setPen(RS_Pen(RS_Color(128, 128, 128),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(line);
-
-
- /*
- for (double mx=-60.0; mx<60.0; mx+=1.0) {
- //for (double mx=0.0; mx<1.0; mx+=2.5) {
- RS_VectorSolutions sol = ellipse->mapX(xp + mx);
- //graphic->addEntity(new RS_Point(graphic,
- // sol.vector2 + RS_Vector(a*500.0, 0.0)));
- //graphic->addEntity(new RS_Point(graphic,
- // sol.vector3 + RS_Vector(a*500.0, 0.0)));
- //graphic->addEntity(new RS_Point(graphic,
- // sol.vector4 + RS_Vector(a*500.0, 0.0)));
-
- line = new RS_Line(graphic,
- RS_LineData(RS_Vector(xp+mx,-50.0),
- RS_Vector(xp+mx,50.0)));
- line->setPen(RS_Pen(RS_Color(60, 60, 60),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(line);
-
- graphic->addEntity(new RS_Point(graphic,
- sol.get(0)));
- }
- */
- }
-
-
- // different minor/minor relations
- /*
- double x, y;
- for (y=-250.0; y<=250.0; y+=50.0) {
- for (x=-250.0; x<=250.0; x+=50.0) {
- RS_Vector v(x, y);
-
- ellipse = new RS_Ellipse(graphic,
- v,
- RS_Vector((x/5+50.0)/2.0, 0.0),
- fabs(x/y),
- 0.0, 2*M_PI,
- false);
-
- ellipse->setPen(RS_Pen(RS_Color(255, 255, 0),
- RS2::Width01,
- RS2::DashDotLine));
-
- graphic->addEntity(ellipse);
- graphic->addEntity(new RS_Point(graphic, ellipse->getMax()));
- graphic->addEntity(new RS_Point(graphic, ellipse->getMin()));
-
- ellipse = new RS_Ellipse(graphic,
- v + RS_Vector(750.0, 0.0),
- RS_Vector((x/5+50.0)/2.0, 0.0),
- fabs(x/y),
- 2*M_PI, 0.0,
- true);
-
- graphic->addEntity(ellipse);
- graphic->addEntity(new RS_Point(graphic, ellipse->getMax()));
- graphic->addEntity(new RS_Point(graphic, ellipse->getMin()));
- }
- }
- */
-
- /*
- // different rotation angles:
- double rot;
- for (rot=0.0; rot<=2*M_PI+0.1; rot+=(M_PI/8)) {
- ellipse = new RS_Ellipse(graphic,
- RS_Vector(rot*200, 500.0),
- RS_Vector(50.0, 0.0).rotate(rot),
- 0.3,
- 0.0, 2*M_PI,
- false);
- graphic->addEntity(ellipse);
- graphic->addEntity(new RS_Point(graphic, ellipse->getMax()));
- graphic->addEntity(new RS_Point(graphic, ellipse->getMin()));
- }
-
-
- // different arc angles:
- double a1, a2;
- for (rot=0.0; rot<=2*M_PI+0.1; rot+=(M_PI/8)) {
- for (a1=0.0; a1<=2*M_PI+0.1; a1+=(M_PI/8)) {
- for (a2=a1+M_PI/8; a2<=2*M_PI+a1+0.1; a2+=(M_PI/8)) {
- ellipse = new RS_Ellipse(graphic,
- RS_Vector(-500.0-a1*200.0-5000.0*rot,
- 500.0-a2*200.0),
- RS_Vector(50.0, 0.0).rotate(rot),
- 0.3,
- a1, a2,
- false);
- graphic->addEntity(ellipse);
- graphic->addEntity(new RS_Point(graphic, ellipse->getMax()));
- graphic->addEntity(new RS_Point(graphic, ellipse->getMin()));
- }
- }
- }
- */
-
- RS_GraphicView* v = getGraphicView();
- if (v!=NULL) {
- v->redraw();
- }
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestInsertText() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestInsertText()");
-
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- RS_Graphic* graphic = (RS_Graphic*)d;
- if (graphic==NULL) {
- return;
- }
-
- RS_Text* text;
- RS_TextData textData;
-
- textData = RS_TextData(RS_Vector(10.0,10.0),
- 10.0, 100.0,
- RS2::VAlignTop,
- RS2::HAlignLeft,
- RS2::LeftToRight,
- RS2::Exact,
- 1.0,
- "Andrew",
- "normal",
- 0.0);
- text = new RS_Text(graphic, textData);
-
- text->setLayerToActive();
- text->setPen(RS_Pen(RS_Color(255, 0, 0),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(text);
-
- /*
- double x, y;
- for (y=-250.0; y<=250.0; y+=50.0) {
- for (x=-250.0; x<=250.0; x+=50.0) {
- RS_Vector v(x, y);
-
- textData = RS_TextData(v,
- 10.0, 100.0,
- RS2::VAlignTop,
- RS2::HAlignLeft,
- RS2::LeftToRight,
- RS2::Exact,
- 1.0,
- "Andrew",
- "normal",
- 0.0);
-
- text = new RS_Text(graphic, textData);
-
- text->setLayerToActive();
- text->setPen(RS_Pen(RS_Color(255, 0, 0),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(text);
- }
- }
-
- RS_Line* line;
- for (x=0.0; x<M_PI*2.0; x+=0.2) {
- RS_Vector v(600.0+cos(x)*50.0, 0.0+sin(x)*50.0);
-
- line = new RS_Line(graphic,
- RS_LineData(RS_Vector(600.0,0.0),
- v));
- line->setLayerToActive();
- line->setPenToActive();
- graphic->addEntity(line);
-
- textData = RS_TextData(v,
- 5.0, 50.0,
- RS2::VAlignTop,
- RS2::HAlignLeft,
- RS2::LeftToRight,
- RS2::Exact,
- 1.0,
- "Andrew",
- "normal",
- x);
-
- text = new RS_Text(graphic, textData);
-
- text->setLayerToActive();
- text->setPen(RS_Pen(RS_Color(255, 0, 0),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(text);
- }
-
- RS_SolidData solidData = RS_SolidData(RS_Vector(5.0, 10.0),
- RS_Vector(25.0, 15.0),
- RS_Vector(15.0, 30.0));
-
- RS_Solid* s = new RS_Solid(graphic, solidData);
-
- s->setLayerToActive();
- s->setPen(RS_Pen(RS_Color(255, 255, 0),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(s);
-
- RS_GraphicView* v = getGraphicView();
- if (v!=NULL) {
- v->redraw();
- }
- */
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestInsertImage() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestInsertImage()");
-
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- RS_Graphic* graphic = (RS_Graphic*)d;
- if (graphic==NULL) {
- return;
- }
-
- RS_Image* image;
- RS_ImageData imageData;
-
- imageData = RS_ImageData(0, RS_Vector(50.0,30.0),
- RS_Vector(0.5,0.5),
- RS_Vector(-0.5,0.5),
- RS_Vector(640,480),
- "/home/andrew/data/image.png",
- 50, 50, 0);
- image = new RS_Image(graphic, imageData);
-
- image->setLayerToActive();
- image->setPen(RS_Pen(RS_Color(255, 0, 0),
- RS2::Width01,
- RS2::SolidLine));
- graphic->addEntity(image);
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestUnicode() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestUnicode()");
-
- slotFileOpen("./fonts/unicode.cxf", RS2::FormatCXF);
- RS_Document* d = getDocument();
- if (d!=NULL) {
- RS_Graphic* graphic = (RS_Graphic*)d;
- if (graphic==NULL) {
- return;
- }
-
- RS_Insert* ins;
-
- int col;
- int row;
- RS_Char uCode; // e.g. 65 (or 'A')
- RS_String strCode; // unicde as string e.g. '[0041] A'
-
- graphic->setAutoUpdateBorders(false);
-
- for (col=0x0000; col<=0xFFF0; col+=0x10) {
- printf("col: %X\n", col);
- for (row=0x0; row<=0xF; row++) {
- //printf(" row: %X\n", row);
-
- uCode = RS_Char(col+row);
- //printf(" code: %X\n", uCode.unicode());
-
- strCode.setNum(uCode.unicode(), 16);
- while (strCode.length()<4) {
- strCode="0"+strCode;
- }
- strCode = "[" + strCode + "] " + uCode;
-
- if (graphic->findBlock(strCode)!=NULL) {
- RS_InsertData d(strCode,
- RS_Vector(col/0x10*20.0,row*20.0),
- RS_Vector(1.0,1.0), 0.0,
- 1, 1, RS_Vector(0.0, 0.0),
- NULL, RS2::NoUpdate);
- ins = new RS_Insert(graphic, d);
- ins->setLayerToActive();
- ins->setPen(RS_Pen(RS_Color(255, 255, 255),
- RS2::Width01,
- RS2::SolidLine));
- ins->update();
- graphic->addEntity(ins);
- }
- }
- }
- graphic->setAutoUpdateBorders(true);
- graphic->calculateBorders();
- }
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestMath01() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestMath01()");
-
- RS_Document* d = getDocument();
- if (d!=NULL) {
- RS_Graphic* graphic = (RS_Graphic*)d;
- if (graphic==NULL) {
- return;
- }
-
- // axis
- graphic->addEntity(new RS_Line(graphic,
- RS_LineData(RS_Vector(0.0,0.0),
- RS_Vector(2*M_PI,0.0))));
- graphic->addEntity(new RS_Line(graphic,
- RS_LineData(RS_Vector(0.0,-1.0),
- RS_Vector(0.0,1.0))));
-
- // cos
- double a;
- double x = 59.0/ARAD;
- double x_0 = 60.0/ARAD;
- for (a=0.01; a<2*M_PI; a+=0.01) {
- // cos curve:
- RS_Line* line = new RS_Line(graphic,
- RS_LineData(RS_Vector(a-0.01, cos(a-0.01)),
- RS_Vector(a, cos(a))));
- graphic->addEntity(line);
-
- // tangent:
- graphic->addEntity(new RS_Line(graphic,
- RS_LineData(RS_Vector(a-0.01,cos(x_0)-sin(x_0)*(a-0.01-x_0)),
- RS_Vector(a,cos(x_0)-sin(x_0)*(a-x_0)))));
- }
-
- // 59.0 deg
- graphic->addEntity(new RS_Line(graphic,
- RS_LineData(RS_Vector(x,0.0),
- RS_Vector(x,1.0))));
-
- // 60.0 deg
- graphic->addEntity(new RS_Line(graphic,
- RS_LineData(RS_Vector(x_0,0.0),
- RS_Vector(x_0,1.0))));
-
- // tangent
- //graphic->addEntity(new RS_Line(graphic,
- // RS_Vector(0.0,cos(x_0)-sin(x_0)*(0.0-x_0)),
- // RS_Vector(6.0,cos(x_0)-sin(x_0)*(6.0-x_0))));
-
-
- RS_GraphicView* v = getGraphicView();
- if (v!=NULL) {
- v->redraw();
- }
- }
-}
-
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestResize640() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestResize640()");
-
- resize(640, 480);
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestResize800() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestResize800()");
-
- resize(800, 600);
-}
-
-
-
-/**
- * Testing function.
- */
-void QC_ApplicationWindow::slotTestResize1024() {
- RS_DEBUG->print("QC_ApplicationWindow::slotTestResize1024()");
-
- resize(1024, 768);
-}
-
-
-
-/**
- * overloaded for Message box on last window exit.
- */
-bool QC_ApplicationWindow::queryExit(bool force) {
- RS_DEBUG->print("QC_ApplicationWindow::queryExit()");
-
- bool succ = true;
-
- // demo:
- if (force) {
- QMessageBox::information(this, QMessageBox::tr("Warning"),
- tr("This is a %1 version "
- "which terminates\n"
- "automatically after 10min. This software is\n"
- "not intended for production use. Please buy\n"
- "a full version of the application from\n%2.\n"
- "You can save your work now.")
- .arg(QC_APPNAME)
-#ifdef QC_CUSTOM_VENDOR
- .arg(QC_CUSTOM_VENDOR),
-#else
- .arg("RibbonSoft, http://www.ribbonsoft.com"),
-#endif
- QMessageBox::Ok);
- }
-
- QWidgetList list = workspace->windowList();
- for (QWidget* w = list.first(); w!=NULL; w = list.next()) {
- succ = ((QC_MDIWindow*)w)->closeMDI(force);
- if (!succ) {
- break;
- }
- }
- if (succ) {
- storeSettings();
- }
-
- RS_DEBUG->print("QC_ApplicationWindow::queryExit(): OK");
-
- return succ;
-}
-
-
-
-/**
- * Handle hotkeys. Don't let it to the default handler of Qt.
- * it will consume them also if a text field is active
- * which means it's impossible to enter a command.
- */
-void QC_ApplicationWindow::keyPressEvent(QKeyEvent* e) {
-
- // timer
- static QTime ts = QTime();
- static QString firstKey = "";
-
- // single key codes:
- switch (e->key()) {
- case Qt::Key_Shift:
- case Qt::Key_Control:
- case Qt::Key_Meta:
- case Qt::Key_Alt:
- case Qt::Key_CapsLock: {
- QMainWindow::keyPressEvent(e);
-
- // forward to actions:
- RS_GraphicView* graphicView = getGraphicView();
- if (graphicView!=NULL) {
- graphicView->keyPressEvent(e);
- }
- e->accept();
- }
- break;
-
- case Qt::Key_Escape:
- firstKey = "";
- slotBack();
- e->accept();
- break;
-
- case Qt::Key_Return:
- if (firstKey.isEmpty()) {
- slotEnter();
- e->accept();
- }
- break;
-
- case Qt::Key_Plus:
- if (firstKey.isEmpty()) {
- actionHandler->slotZoomIn();
- e->accept();
- }
- break;
-
- case Qt::Key_Minus:
- if (firstKey.isEmpty()) {
- actionHandler->slotZoomOut();
- e->accept();
- }
- break;
-
- default:
- e->ignore();
- break;
- }
-
- if (e->isAccepted()) {
- return;
- }
-
- QTime now = QTime::currentTime();
-
- // multi key codes:
- if (ts.msecsTo(now)<2000) {
- QString code =
- QString("%1%2").arg(firstKey).arg(QChar(e->key())).lower();
-
- if (actionHandler->keycode(code)==false) {
- ts = now;
- if (QChar(e->key()).isPrint()) {
- firstKey += e->key();
- }
- }
- else {
- firstKey="";
- }
- }
- else {
- ts = now;
- if (QChar(e->key()).isPrint()) {
- firstKey = e->key();
- }
- }
-
- QMainWindow::keyPressEvent(e);
-}
-
-
-void QC_ApplicationWindow::keyReleaseEvent(QKeyEvent* e) {
-
- switch (e->key()) {
- case Qt::Key_Shift:
- case Qt::Key_Control:
- case Qt::Key_Meta:
- case Qt::Key_Alt:
- case Qt::Key_CapsLock: {
- QMainWindow::keyReleaseEvent(e);
-
- // forward to actions:
- RS_GraphicView* graphicView = getGraphicView();
- if (graphicView!=NULL) {
- graphicView->keyReleaseEvent(e);
- }
- e->accept();
- }
- break;
- }
-
- QMainWindow::keyPressEvent(e);
-}
-
-
diff --git a/qcadactions/src/Makefile b/qcadactions/src/Makefile
deleted file mode 100644
index cf55c9e..0000000
--- a/qcadactions/src/Makefile
+++ /dev/null
@@ -1,1688 +0,0 @@
-#############################################################################
-# Makefile for building: libqcadactions.a
-# Generated by qmake (1.07a) (Qt 3.3.8b) on: Wed Mar 18 19:30:12 2009
-# Project: qcadactions.pro
-# Template: lib
-# Command: $(QMAKE) -o Makefile qcadactions.pro
-#############################################################################
-
-####### Compiler, tools and options
-
-CC = gcc
-CXX = g++
-LEX = flex
-YACC = yacc
-CFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-CXXFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wno-long-long -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-LEXFLAGS =
-YACCFLAGS= -d
-INCPATH = -I/usr/lib64/qt3/mkspecs/default -I. -I../include -I../../dxflib/include -I../../qcadlib/include -I../../fparser/include -I../../qcadcmd/include -I/usr/include -I$(QTDIR)/include -Imoc/
-AR = ar cqs
-RANLIB =
-MOC = $(QTDIR)/bin/moc
-UIC = $(QTDIR)/bin/uic
-QMAKE = qmake
-TAR = tar -cf
-GZIP = gzip -9f
-COPY = cp -f
-COPY_FILE= $(COPY)
-COPY_DIR = $(COPY) -r
-INSTALL_FILE= $(COPY_FILE)
-INSTALL_DIR = $(COPY_DIR)
-DEL_FILE = rm -f
-SYMLINK = ln -sf
-DEL_DIR = rmdir
-MOVE = mv -f
-CHK_DIR_EXISTS= test -d
-MKDIR = mkdir -p
-
-####### Output directory
-
-OBJECTS_DIR = obj/
-
-####### Files
-
-HEADERS = rs_actionblocksadd.h \
- rs_actionblocksattributes.h \
- rs_actionblockscreate.h \
- rs_actionblocksedit.h \
- rs_actionblocksexplode.h \
- rs_actionblocksinsert.h \
- rs_actionblocksfreezeall.h \
- rs_actionblocksremove.h \
- rs_actionblockstoggleview.h \
- rs_actiondefault.h \
- rs_actiondimaligned.h \
- rs_actiondimangular.h \
- rs_actiondimdiametric.h \
- rs_actiondimension.h \
- rs_actiondimleader.h \
- rs_actiondimlinear.h \
- rs_actiondimradial.h \
- rs_actiondrawarc.h \
- rs_actiondrawarc3p.h \
- rs_actiondrawarctangential.h \
- rs_actiondrawcircle.h \
- rs_actiondrawcircle2p.h \
- rs_actiondrawcircle3p.h \
- rs_actiondrawcirclecr.h \
- rs_actiondrawellipseaxis.h \
- rs_actiondrawhatch.h \
- rs_actiondrawimage.h \
- rs_actiondrawline.h \
- rs_actiondrawlineangle.h \
- rs_actiondrawlinebisector.h \
- rs_actiondrawlinefree.h \
- rs_actiondrawlinehorvert.h \
- rs_actiondrawlineparallel.h \
- rs_actiondrawlineparallelthrough.h \
- rs_actiondrawlinepolygon.h \
- rs_actiondrawlinepolygon2.h \
- rs_actiondrawlinerectangle.h \
- rs_actiondrawlinerelangle.h \
- rs_actiondrawlinetangent1.h \
- rs_actiondrawlinetangent2.h \
- rs_actiondrawpoint.h \
- rs_actiondrawpolyline.h \
- rs_actiondrawspline.h \
- rs_actiondrawtext.h \
- rs_actioneditcopy.h \
- rs_actioneditpaste.h \
- rs_actioneditundo.h \
- rs_actionfilenew.h \
- rs_actionfileopen.h \
- rs_actionfilesave.h \
- rs_actionfilesaveas.h \
- rs_actioninfoangle.h \
- rs_actioninfoarea.h \
- rs_actioninfoinside.h \
- rs_actioninfodist.h \
- rs_actioninfodist2.h \
- rs_actioninfototallength.h \
- rs_actionlayersadd.h \
- rs_actionlayersedit.h \
- rs_actionlayersfreezeall.h \
- rs_actionlayersremove.h \
- rs_actionlayerstogglelock.h \
- rs_actionlayerstoggleview.h \
- rs_actionlibraryinsert.h \
- rs_actionlockrelativezero.h \
- rs_actionmodifyattributes.h \
- rs_actionmodifybevel.h \
- rs_actionmodifycut.h \
- rs_actionmodifydelete.h \
- rs_actionmodifydeletefree.h \
- rs_actionmodifydeletequick.h \
- rs_actionmodifyentity.h \
- rs_actionmodifymirror.h \
- rs_actionmodifymove.h \
- rs_actionmodifymoverotate.h \
- rs_actionmodifyrotate.h \
- rs_actionmodifyrotate2.h \
- rs_actionmodifyround.h \
- rs_actionmodifyscale.h \
- rs_actionmodifystretch.h \
- rs_actionmodifytrim.h \
- rs_actionmodifytrimamount.h \
- rs_actionmodifyexplodetext.h \
- rs_actionoptionsdrawing.h \
- rs_actionparisdebugcreatecontainer.h \
- rs_actionprintpreview.h \
- rs_actionselect.h \
- rs_actionselectall.h \
- rs_actionselectbase.h \
- rs_actionselectcontour.h \
- rs_actionselectintersected.h \
- rs_actionselectinvert.h \
- rs_actionselectsingle.h \
- rs_actionselectwindow.h \
- rs_actionselectlayer.h \
- rs_actionsetrelativezero.h \
- rs_actionsetsnapmode.h \
- rs_actionsetsnaprestriction.h \
- rs_actionsnapintersectionmanual.h \
- rs_actiontoolregeneratedimensions.h \
- rs_actionzoomauto.h \
- rs_actionzoomautoy.h \
- rs_actionzoomin.h \
- rs_actionzoompan.h \
- rs_actionzoomprevious.h \
- rs_actionzoomredraw.h \
- rs_actionzoomscroll.h \
- rs_actionzoomwindow.h
-SOURCES = rs_actionblocksadd.cpp \
- rs_actionblocksattributes.cpp \
- rs_actionblockscreate.cpp \
- rs_actionblocksedit.cpp \
- rs_actionblocksexplode.cpp \
- rs_actionblocksinsert.cpp \
- rs_actionblocksfreezeall.cpp \
- rs_actionblocksremove.cpp \
- rs_actionblockstoggleview.cpp \
- rs_actiondefault.cpp \
- rs_actiondimaligned.cpp \
- rs_actiondimangular.cpp \
- rs_actiondimdiametric.cpp \
- rs_actiondimension.cpp \
- rs_actiondimleader.cpp \
- rs_actiondimlinear.cpp \
- rs_actiondimradial.cpp \
- rs_actiondrawarc.cpp \
- rs_actiondrawarc3p.cpp \
- rs_actiondrawarctangential.cpp \
- rs_actiondrawcircle.cpp \
- rs_actiondrawcircle2p.cpp \
- rs_actiondrawcircle3p.cpp \
- rs_actiondrawcirclecr.cpp \
- rs_actiondrawellipseaxis.cpp \
- rs_actiondrawhatch.cpp \
- rs_actiondrawimage.cpp \
- rs_actiondrawline.cpp \
- rs_actiondrawlineangle.cpp \
- rs_actiondrawlinebisector.cpp \
- rs_actiondrawlinefree.cpp \
- rs_actiondrawlinehorvert.cpp \
- rs_actiondrawlineparallel.cpp \
- rs_actiondrawlineparallelthrough.cpp \
- rs_actiondrawlinepolygon.cpp \
- rs_actiondrawlinepolygon2.cpp \
- rs_actiondrawlinerectangle.cpp \
- rs_actiondrawlinerelangle.cpp \
- rs_actiondrawlinetangent1.cpp \
- rs_actiondrawlinetangent2.cpp \
- rs_actiondrawpoint.cpp \
- rs_actiondrawpolyline.cpp \
- rs_actiondrawspline.cpp \
- rs_actiondrawtext.cpp \
- rs_actioneditcopy.cpp \
- rs_actioneditpaste.cpp \
- rs_actioneditundo.cpp \
- rs_actionfilenew.cpp \
- rs_actionfileopen.cpp \
- rs_actionfilesave.cpp \
- rs_actionfilesaveas.cpp \
- rs_actioninfoangle.cpp \
- rs_actioninfoarea.cpp \
- rs_actioninfoinside.cpp \
- rs_actioninfodist.cpp \
- rs_actioninfodist2.cpp \
- rs_actioninfototallength.cpp \
- rs_actionlayersadd.cpp \
- rs_actionlayersedit.cpp \
- rs_actionlayersfreezeall.cpp \
- rs_actionlayersremove.cpp \
- rs_actionlayerstogglelock.cpp \
- rs_actionlayerstoggleview.cpp \
- rs_actionlibraryinsert.cpp \
- rs_actionlockrelativezero.cpp \
- rs_actionmodifyattributes.cpp \
- rs_actionmodifybevel.cpp \
- rs_actionmodifycut.cpp \
- rs_actionmodifydelete.cpp \
- rs_actionmodifydeletefree.cpp \
- rs_actionmodifydeletequick.cpp \
- rs_actionmodifyentity.cpp \
- rs_actionmodifymirror.cpp \
- rs_actionmodifymove.cpp \
- rs_actionmodifymoverotate.cpp \
- rs_actionmodifyrotate.cpp \
- rs_actionmodifyrotate2.cpp \
- rs_actionmodifyround.cpp \
- rs_actionmodifyscale.cpp \
- rs_actionmodifystretch.cpp \
- rs_actionmodifytrim.cpp \
- rs_actionmodifytrimamount.cpp \
- rs_actionmodifyexplodetext.cpp \
- rs_actionoptionsdrawing.cpp \
- rs_actionparisdebugcreatecontainer.cpp \
- rs_actionprintpreview.cpp \
- rs_actionselect.cpp \
- rs_actionselectall.cpp \
- rs_actionselectbase.cpp \
- rs_actionselectcontour.cpp \
- rs_actionselectintersected.cpp \
- rs_actionselectinvert.cpp \
- rs_actionselectsingle.cpp \
- rs_actionselectwindow.cpp \
- rs_actionselectlayer.cpp \
- rs_actionsetrelativezero.cpp \
- rs_actionsetsnapmode.cpp \
- rs_actionsetsnaprestriction.cpp \
- rs_actionsnapintersectionmanual.cpp \
- rs_actiontoolregeneratedimensions.cpp \
- rs_actionzoomauto.cpp \
- rs_actionzoomautoy.cpp \
- rs_actionzoomin.cpp \
- rs_actionzoompan.cpp \
- rs_actionzoomprevious.cpp \
- rs_actionzoomredraw.cpp \
- rs_actionzoomscroll.cpp \
- rs_actionzoomwindow.cpp
-OBJECTS = obj/rs_actionblocksadd.o \
- obj/rs_actionblocksattributes.o \
- obj/rs_actionblockscreate.o \
- obj/rs_actionblocksedit.o \
- obj/rs_actionblocksexplode.o \
- obj/rs_actionblocksinsert.o \
- obj/rs_actionblocksfreezeall.o \
- obj/rs_actionblocksremove.o \
- obj/rs_actionblockstoggleview.o \
- obj/rs_actiondefault.o \
- obj/rs_actiondimaligned.o \
- obj/rs_actiondimangular.o \
- obj/rs_actiondimdiametric.o \
- obj/rs_actiondimension.o \
- obj/rs_actiondimleader.o \
- obj/rs_actiondimlinear.o \
- obj/rs_actiondimradial.o \
- obj/rs_actiondrawarc.o \
- obj/rs_actiondrawarc3p.o \
- obj/rs_actiondrawarctangential.o \
- obj/rs_actiondrawcircle.o \
- obj/rs_actiondrawcircle2p.o \
- obj/rs_actiondrawcircle3p.o \
- obj/rs_actiondrawcirclecr.o \
- obj/rs_actiondrawellipseaxis.o \
- obj/rs_actiondrawhatch.o \
- obj/rs_actiondrawimage.o \
- obj/rs_actiondrawline.o \
- obj/rs_actiondrawlineangle.o \
- obj/rs_actiondrawlinebisector.o \
- obj/rs_actiondrawlinefree.o \
- obj/rs_actiondrawlinehorvert.o \
- obj/rs_actiondrawlineparallel.o \
- obj/rs_actiondrawlineparallelthrough.o \
- obj/rs_actiondrawlinepolygon.o \
- obj/rs_actiondrawlinepolygon2.o \
- obj/rs_actiondrawlinerectangle.o \
- obj/rs_actiondrawlinerelangle.o \
- obj/rs_actiondrawlinetangent1.o \
- obj/rs_actiondrawlinetangent2.o \
- obj/rs_actiondrawpoint.o \
- obj/rs_actiondrawpolyline.o \
- obj/rs_actiondrawspline.o \
- obj/rs_actiondrawtext.o \
- obj/rs_actioneditcopy.o \
- obj/rs_actioneditpaste.o \
- obj/rs_actioneditundo.o \
- obj/rs_actionfilenew.o \
- obj/rs_actionfileopen.o \
- obj/rs_actionfilesave.o \
- obj/rs_actionfilesaveas.o \
- obj/rs_actioninfoangle.o \
- obj/rs_actioninfoarea.o \
- obj/rs_actioninfoinside.o \
- obj/rs_actioninfodist.o \
- obj/rs_actioninfodist2.o \
- obj/rs_actioninfototallength.o \
- obj/rs_actionlayersadd.o \
- obj/rs_actionlayersedit.o \
- obj/rs_actionlayersfreezeall.o \
- obj/rs_actionlayersremove.o \
- obj/rs_actionlayerstogglelock.o \
- obj/rs_actionlayerstoggleview.o \
- obj/rs_actionlibraryinsert.o \
- obj/rs_actionlockrelativezero.o \
- obj/rs_actionmodifyattributes.o \
- obj/rs_actionmodifybevel.o \
- obj/rs_actionmodifycut.o \
- obj/rs_actionmodifydelete.o \
- obj/rs_actionmodifydeletefree.o \
- obj/rs_actionmodifydeletequick.o \
- obj/rs_actionmodifyentity.o \
- obj/rs_actionmodifymirror.o \
- obj/rs_actionmodifymove.o \
- obj/rs_actionmodifymoverotate.o \
- obj/rs_actionmodifyrotate.o \
- obj/rs_actionmodifyrotate2.o \
- obj/rs_actionmodifyround.o \
- obj/rs_actionmodifyscale.o \
- obj/rs_actionmodifystretch.o \
- obj/rs_actionmodifytrim.o \
- obj/rs_actionmodifytrimamount.o \
- obj/rs_actionmodifyexplodetext.o \
- obj/rs_actionoptionsdrawing.o \
- obj/rs_actionparisdebugcreatecontainer.o \
- obj/rs_actionprintpreview.o \
- obj/rs_actionselect.o \
- obj/rs_actionselectall.o \
- obj/rs_actionselectbase.o \
- obj/rs_actionselectcontour.o \
- obj/rs_actionselectintersected.o \
- obj/rs_actionselectinvert.o \
- obj/rs_actionselectsingle.o \
- obj/rs_actionselectwindow.o \
- obj/rs_actionselectlayer.o \
- obj/rs_actionsetrelativezero.o \
- obj/rs_actionsetsnapmode.o \
- obj/rs_actionsetsnaprestriction.o \
- obj/rs_actionsnapintersectionmanual.o \
- obj/rs_actiontoolregeneratedimensions.o \
- obj/rs_actionzoomauto.o \
- obj/rs_actionzoomautoy.o \
- obj/rs_actionzoomin.o \
- obj/rs_actionzoompan.o \
- obj/rs_actionzoomprevious.o \
- obj/rs_actionzoomredraw.o \
- obj/rs_actionzoomscroll.o \
- obj/rs_actionzoomwindow.o \
- obj/qmake_image_collection.o
-FORMS =
-UICDECLS =
-UICIMPLS =
-SRCMOC = moc/moc_rs_actionblocksadd.cpp \
- moc/moc_rs_actionblocksattributes.cpp \
- moc/moc_rs_actionblockscreate.cpp \
- moc/moc_rs_actionblocksedit.cpp \
- moc/moc_rs_actionblocksexplode.cpp \
- moc/moc_rs_actionblocksinsert.cpp \
- moc/moc_rs_actionblocksfreezeall.cpp \
- moc/moc_rs_actionblocksremove.cpp \
- moc/moc_rs_actionblockstoggleview.cpp \
- moc/moc_rs_actiondefault.cpp \
- moc/moc_rs_actiondimaligned.cpp \
- moc/moc_rs_actiondimangular.cpp \
- moc/moc_rs_actiondimdiametric.cpp \
- moc/moc_rs_actiondimension.cpp \
- moc/moc_rs_actiondimleader.cpp \
- moc/moc_rs_actiondimlinear.cpp \
- moc/moc_rs_actiondimradial.cpp \
- moc/moc_rs_actiondrawarc.cpp \
- moc/moc_rs_actiondrawarc3p.cpp \
- moc/moc_rs_actiondrawarctangential.cpp \
- moc/moc_rs_actiondrawcircle.cpp \
- moc/moc_rs_actiondrawcircle2p.cpp \
- moc/moc_rs_actiondrawcircle3p.cpp \
- moc/moc_rs_actiondrawcirclecr.cpp \
- moc/moc_rs_actiondrawellipseaxis.cpp \
- moc/moc_rs_actiondrawhatch.cpp \
- moc/moc_rs_actiondrawimage.cpp \
- moc/moc_rs_actiondrawline.cpp \
- moc/moc_rs_actiondrawlineangle.cpp \
- moc/moc_rs_actiondrawlinebisector.cpp \
- moc/moc_rs_actiondrawlinefree.cpp \
- moc/moc_rs_actiondrawlinehorvert.cpp \
- moc/moc_rs_actiondrawlineparallel.cpp \
- moc/moc_rs_actiondrawlineparallelthrough.cpp \
- moc/moc_rs_actiondrawlinepolygon.cpp \
- moc/moc_rs_actiondrawlinepolygon2.cpp \
- moc/moc_rs_actiondrawlinerectangle.cpp \
- moc/moc_rs_actiondrawlinerelangle.cpp \
- moc/moc_rs_actiondrawlinetangent1.cpp \
- moc/moc_rs_actiondrawlinetangent2.cpp \
- moc/moc_rs_actiondrawpoint.cpp \
- moc/moc_rs_actiondrawpolyline.cpp \
- moc/moc_rs_actiondrawspline.cpp \
- moc/moc_rs_actiondrawtext.cpp \
- moc/moc_rs_actioneditcopy.cpp \
- moc/moc_rs_actioneditpaste.cpp \
- moc/moc_rs_actioneditundo.cpp \
- moc/moc_rs_actionfilenew.cpp \
- moc/moc_rs_actionfileopen.cpp \
- moc/moc_rs_actionfilesave.cpp \
- moc/moc_rs_actionfilesaveas.cpp \
- moc/moc_rs_actioninfoangle.cpp \
- moc/moc_rs_actioninfoarea.cpp \
- moc/moc_rs_actioninfoinside.cpp \
- moc/moc_rs_actioninfodist.cpp \
- moc/moc_rs_actioninfodist2.cpp \
- moc/moc_rs_actioninfototallength.cpp \
- moc/moc_rs_actionlayersadd.cpp \
- moc/moc_rs_actionlayersedit.cpp \
- moc/moc_rs_actionlayersfreezeall.cpp \
- moc/moc_rs_actionlayersremove.cpp \
- moc/moc_rs_actionlayerstogglelock.cpp \
- moc/moc_rs_actionlayerstoggleview.cpp \
- moc/moc_rs_actionlibraryinsert.cpp \
- moc/moc_rs_actionlockrelativezero.cpp \
- moc/moc_rs_actionmodifyattributes.cpp \
- moc/moc_rs_actionmodifybevel.cpp \
- moc/moc_rs_actionmodifycut.cpp \
- moc/moc_rs_actionmodifydelete.cpp \
- moc/moc_rs_actionmodifydeletefree.cpp \
- moc/moc_rs_actionmodifydeletequick.cpp \
- moc/moc_rs_actionmodifyentity.cpp \
- moc/moc_rs_actionmodifymirror.cpp \
- moc/moc_rs_actionmodifymove.cpp \
- moc/moc_rs_actionmodifymoverotate.cpp \
- moc/moc_rs_actionmodifyrotate.cpp \
- moc/moc_rs_actionmodifyrotate2.cpp \
- moc/moc_rs_actionmodifyround.cpp \
- moc/moc_rs_actionmodifyscale.cpp \
- moc/moc_rs_actionmodifystretch.cpp \
- moc/moc_rs_actionmodifytrim.cpp \
- moc/moc_rs_actionmodifytrimamount.cpp \
- moc/moc_rs_actionmodifyexplodetext.cpp \
- moc/moc_rs_actionoptionsdrawing.cpp \
- moc/moc_rs_actionparisdebugcreatecontainer.cpp \
- moc/moc_rs_actionprintpreview.cpp \
- moc/moc_rs_actionselect.cpp \
- moc/moc_rs_actionselectall.cpp \
- moc/moc_rs_actionselectbase.cpp \
- moc/moc_rs_actionselectcontour.cpp \
- moc/moc_rs_actionselectintersected.cpp \
- moc/moc_rs_actionselectinvert.cpp \
- moc/moc_rs_actionselectsingle.cpp \
- moc/moc_rs_actionselectwindow.cpp \
- moc/moc_rs_actionselectlayer.cpp \
- moc/moc_rs_actionsetrelativezero.cpp \
- moc/moc_rs_actionsetsnapmode.cpp \
- moc/moc_rs_actionsetsnaprestriction.cpp \
- moc/moc_rs_actionsnapintersectionmanual.cpp \
- moc/moc_rs_actiontoolregeneratedimensions.cpp \
- moc/moc_rs_actionzoomauto.cpp \
- moc/moc_rs_actionzoomautoy.cpp \
- moc/moc_rs_actionzoomin.cpp \
- moc/moc_rs_actionzoompan.cpp \
- moc/moc_rs_actionzoomprevious.cpp \
- moc/moc_rs_actionzoomredraw.cpp \
- moc/moc_rs_actionzoomscroll.cpp \
- moc/moc_rs_actionzoomwindow.cpp
-OBJMOC = obj/moc_rs_actionblocksadd.o \
- obj/moc_rs_actionblocksattributes.o \
- obj/moc_rs_actionblockscreate.o \
- obj/moc_rs_actionblocksedit.o \
- obj/moc_rs_actionblocksexplode.o \
- obj/moc_rs_actionblocksinsert.o \
- obj/moc_rs_actionblocksfreezeall.o \
- obj/moc_rs_actionblocksremove.o \
- obj/moc_rs_actionblockstoggleview.o \
- obj/moc_rs_actiondefault.o \
- obj/moc_rs_actiondimaligned.o \
- obj/moc_rs_actiondimangular.o \
- obj/moc_rs_actiondimdiametric.o \
- obj/moc_rs_actiondimension.o \
- obj/moc_rs_actiondimleader.o \
- obj/moc_rs_actiondimlinear.o \
- obj/moc_rs_actiondimradial.o \
- obj/moc_rs_actiondrawarc.o \
- obj/moc_rs_actiondrawarc3p.o \
- obj/moc_rs_actiondrawarctangential.o \
- obj/moc_rs_actiondrawcircle.o \
- obj/moc_rs_actiondrawcircle2p.o \
- obj/moc_rs_actiondrawcircle3p.o \
- obj/moc_rs_actiondrawcirclecr.o \
- obj/moc_rs_actiondrawellipseaxis.o \
- obj/moc_rs_actiondrawhatch.o \
- obj/moc_rs_actiondrawimage.o \
- obj/moc_rs_actiondrawline.o \
- obj/moc_rs_actiondrawlineangle.o \
- obj/moc_rs_actiondrawlinebisector.o \
- obj/moc_rs_actiondrawlinefree.o \
- obj/moc_rs_actiondrawlinehorvert.o \
- obj/moc_rs_actiondrawlineparallel.o \
- obj/moc_rs_actiondrawlineparallelthrough.o \
- obj/moc_rs_actiondrawlinepolygon.o \
- obj/moc_rs_actiondrawlinepolygon2.o \
- obj/moc_rs_actiondrawlinerectangle.o \
- obj/moc_rs_actiondrawlinerelangle.o \
- obj/moc_rs_actiondrawlinetangent1.o \
- obj/moc_rs_actiondrawlinetangent2.o \
- obj/moc_rs_actiondrawpoint.o \
- obj/moc_rs_actiondrawpolyline.o \
- obj/moc_rs_actiondrawspline.o \
- obj/moc_rs_actiondrawtext.o \
- obj/moc_rs_actioneditcopy.o \
- obj/moc_rs_actioneditpaste.o \
- obj/moc_rs_actioneditundo.o \
- obj/moc_rs_actionfilenew.o \
- obj/moc_rs_actionfileopen.o \
- obj/moc_rs_actionfilesave.o \
- obj/moc_rs_actionfilesaveas.o \
- obj/moc_rs_actioninfoangle.o \
- obj/moc_rs_actioninfoarea.o \
- obj/moc_rs_actioninfoinside.o \
- obj/moc_rs_actioninfodist.o \
- obj/moc_rs_actioninfodist2.o \
- obj/moc_rs_actioninfototallength.o \
- obj/moc_rs_actionlayersadd.o \
- obj/moc_rs_actionlayersedit.o \
- obj/moc_rs_actionlayersfreezeall.o \
- obj/moc_rs_actionlayersremove.o \
- obj/moc_rs_actionlayerstogglelock.o \
- obj/moc_rs_actionlayerstoggleview.o \
- obj/moc_rs_actionlibraryinsert.o \
- obj/moc_rs_actionlockrelativezero.o \
- obj/moc_rs_actionmodifyattributes.o \
- obj/moc_rs_actionmodifybevel.o \
- obj/moc_rs_actionmodifycut.o \
- obj/moc_rs_actionmodifydelete.o \
- obj/moc_rs_actionmodifydeletefree.o \
- obj/moc_rs_actionmodifydeletequick.o \
- obj/moc_rs_actionmodifyentity.o \
- obj/moc_rs_actionmodifymirror.o \
- obj/moc_rs_actionmodifymove.o \
- obj/moc_rs_actionmodifymoverotate.o \
- obj/moc_rs_actionmodifyrotate.o \
- obj/moc_rs_actionmodifyrotate2.o \
- obj/moc_rs_actionmodifyround.o \
- obj/moc_rs_actionmodifyscale.o \
- obj/moc_rs_actionmodifystretch.o \
- obj/moc_rs_actionmodifytrim.o \
- obj/moc_rs_actionmodifytrimamount.o \
- obj/moc_rs_actionmodifyexplodetext.o \
- obj/moc_rs_actionoptionsdrawing.o \
- obj/moc_rs_actionparisdebugcreatecontainer.o \
- obj/moc_rs_actionprintpreview.o \
- obj/moc_rs_actionselect.o \
- obj/moc_rs_actionselectall.o \
- obj/moc_rs_actionselectbase.o \
- obj/moc_rs_actionselectcontour.o \
- obj/moc_rs_actionselectintersected.o \
- obj/moc_rs_actionselectinvert.o \
- obj/moc_rs_actionselectsingle.o \
- obj/moc_rs_actionselectwindow.o \
- obj/moc_rs_actionselectlayer.o \
- obj/moc_rs_actionsetrelativezero.o \
- obj/moc_rs_actionsetsnapmode.o \
- obj/moc_rs_actionsetsnaprestriction.o \
- obj/moc_rs_actionsnapintersectionmanual.o \
- obj/moc_rs_actiontoolregeneratedimensions.o \
- obj/moc_rs_actionzoomauto.o \
- obj/moc_rs_actionzoomautoy.o \
- obj/moc_rs_actionzoomin.o \
- obj/moc_rs_actionzoompan.o \
- obj/moc_rs_actionzoomprevious.o \
- obj/moc_rs_actionzoomredraw.o \
- obj/moc_rs_actionzoomscroll.o \
- obj/moc_rs_actionzoomwindow.o
-DIST = ../../mkspecs/defs.pro \
- qcadactions.pro
-QMAKE_TARGET = qcadactions
-DESTDIR = ../lib/
-TARGET = libqcadactions.a
-
-first: all
-####### Implicit rules
-
-.SUFFIXES: .c .o .cpp .cc .cxx .C
-
-.cpp.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cc.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cxx.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.C.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.c.o:
- $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $<
-
-####### Build rules
-
-all: Makefile ../lib/$(TARGET)
-
-staticlib: ../lib/$(TARGET)
-
-../lib/$(TARGET): $(UICDECLS) $(OBJECTS) $(OBJMOC) $(OBJCOMP)
- test -d ../lib/ || mkdir -p ../lib/
- -$(DEL_FILE) $(TARGET)
- $(AR) $(TARGET) $(OBJECTS) $(OBJMOC)
- -$(DEL_FILE) ../lib/$(TARGET)
- -$(MOVE) $(TARGET) ../lib/
-
-
-mocables: $(SRCMOC)
-uicables: $(UICDECLS) $(UICIMPLS)
-
-$(MOC):
- ( cd $(QTDIR)/src/moc && $(MAKE) )
-
-Makefile: qcadactions.pro /usr/lib64/qt3/mkspecs/default/qmake.conf ../../mkspecs/defs.pro \
- /usr/lib64/qt3/lib64/libqt-mt.prl
- $(QMAKE) -o Makefile qcadactions.pro
-qmake:
- @$(QMAKE) -o Makefile qcadactions.pro
-
-dist:
- @mkdir -p obj/qcadactions && $(COPY_FILE) --parents $(SOURCES) $(HEADERS) $(FORMS) $(DIST) obj/qcadactions/ && $(COPY_FILE) --parents ts/qcadactions_cs.ts ts/qcadactions_en.ts ts/qcadactions_et.ts ts/qcadactions_da.ts ts/qcadactions_de.ts ts/qcadactions_el.ts ts/qcadactions_es.ts ts/qcadactions_fr.ts ts/qcadactions_hu.ts ts/qcadactions_it.ts ts/qcadactions_nl.ts ts/qcadactions_no.ts ts/qcadactions_pa.ts ts/qcadactions_pl.ts ts/qcadactions_ru.ts ts/qcadactions_sk.ts ts/qcadactions_tr.ts obj/qcadactions/ && $(COPY_FILE) --parents images/configure.png images/editcopy2.png images/editcut2.png images/editpaste2.png images/exit.png images/fileclose.png images/filenew.png images/fileopen2.png images/fileprint.png images/fileprintpreview.png images/filesave2.png images/filesaveas.png images/redo2.png images/undo2.png images/viewgrid.png images/viewdraft.png images/zoomauto.png images/zoomin.png images/zoomout.png images/zoompan.png images/zoomprevious.png images/zoomredraw.png images/zoomwindow.png obj/qcadactions/ && ( cd `dirname obj/qcadactions` && $(TAR) qcadactions.tar qcadactions && $(GZIP) qcadactions.tar ) && $(MOVE) `dirname obj/qcadactions`/qcadactions.tar.gz . && $(DEL_FILE) -r obj/qcadactions
-
-mocclean:
- -$(DEL_FILE) $(OBJMOC)
- -$(DEL_FILE) $(SRCMOC)
-
-uiclean:
-
-yaccclean:
-lexclean:
-clean: mocclean
- -$(DEL_FILE) $(OBJECTS)
- -$(DEL_FILE) qmake_image_collection.cpp
- -$(DEL_FILE) *~ core *.core
-
-
-####### Sub-libraries
-
-distclean: clean
- -$(DEL_FILE) ../lib/$(TARGET) $(TARGET)
-
-
-FORCE:
-
-####### Compile
-
-obj/rs_actionblocksadd.o: rs_actionblocksadd.cpp rs_actionblocksadd.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksadd.o rs_actionblocksadd.cpp
-
-obj/rs_actionblocksattributes.o: rs_actionblocksattributes.cpp rs_actionblocksattributes.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksattributes.o rs_actionblocksattributes.cpp
-
-obj/rs_actionblockscreate.o: rs_actionblockscreate.cpp rs_actionblockscreate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblockscreate.o rs_actionblockscreate.cpp
-
-obj/rs_actionblocksedit.o: rs_actionblocksedit.cpp rs_actionblocksedit.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksedit.o rs_actionblocksedit.cpp
-
-obj/rs_actionblocksexplode.o: rs_actionblocksexplode.cpp rs_actionblocksexplode.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksexplode.o rs_actionblocksexplode.cpp
-
-obj/rs_actionblocksinsert.o: rs_actionblocksinsert.cpp rs_actionblocksinsert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksinsert.o rs_actionblocksinsert.cpp
-
-obj/rs_actionblocksfreezeall.o: rs_actionblocksfreezeall.cpp rs_actionblocksfreezeall.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksfreezeall.o rs_actionblocksfreezeall.cpp
-
-obj/rs_actionblocksremove.o: rs_actionblocksremove.cpp rs_actionblocksremove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblocksremove.o rs_actionblocksremove.cpp
-
-obj/rs_actionblockstoggleview.o: rs_actionblockstoggleview.cpp rs_actionblockstoggleview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionblockstoggleview.o rs_actionblockstoggleview.cpp
-
-obj/rs_actiondefault.o: rs_actiondefault.cpp rs_actiondefault.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondefault.o rs_actiondefault.cpp
-
-obj/rs_actiondimaligned.o: rs_actiondimaligned.cpp rs_actiondimaligned.h \
- rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimaligned.o rs_actiondimaligned.cpp
-
-obj/rs_actiondimangular.o: rs_actiondimangular.cpp rs_actiondimangular.h \
- rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimangular.o rs_actiondimangular.cpp
-
-obj/rs_actiondimdiametric.o: rs_actiondimdiametric.cpp rs_actiondimdiametric.h \
- rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimdiametric.o rs_actiondimdiametric.cpp
-
-obj/rs_actiondimension.o: rs_actiondimension.cpp rs_actiondimaligned.h \
- rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimension.o rs_actiondimension.cpp
-
-obj/rs_actiondimleader.o: rs_actiondimleader.cpp rs_actiondimleader.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimleader.o rs_actiondimleader.cpp
-
-obj/rs_actiondimlinear.o: rs_actiondimlinear.cpp rs_actiondimlinear.h \
- rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimlinear.o rs_actiondimlinear.cpp
-
-obj/rs_actiondimradial.o: rs_actiondimradial.cpp rs_actiondimradial.h \
- rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondimradial.o rs_actiondimradial.cpp
-
-obj/rs_actiondrawarc.o: rs_actiondrawarc.cpp rs_actiondrawarc.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawarc.o rs_actiondrawarc.cpp
-
-obj/rs_actiondrawarc3p.o: rs_actiondrawarc3p.cpp rs_actiondrawarc3p.h \
- rs_actiondrawarc.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawarc3p.o rs_actiondrawarc3p.cpp
-
-obj/rs_actiondrawarctangential.o: rs_actiondrawarctangential.cpp rs_actiondrawarctangential.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawarctangential.o rs_actiondrawarctangential.cpp
-
-obj/rs_actiondrawcircle.o: rs_actiondrawcircle.cpp rs_actiondrawcircle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawcircle.o rs_actiondrawcircle.cpp
-
-obj/rs_actiondrawcircle2p.o: rs_actiondrawcircle2p.cpp rs_actiondrawcircle2p.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawcircle2p.o rs_actiondrawcircle2p.cpp
-
-obj/rs_actiondrawcircle3p.o: rs_actiondrawcircle3p.cpp rs_actiondrawcircle3p.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawcircle3p.o rs_actiondrawcircle3p.cpp
-
-obj/rs_actiondrawcirclecr.o: rs_actiondrawcirclecr.cpp rs_actiondrawcirclecr.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawcirclecr.o rs_actiondrawcirclecr.cpp
-
-obj/rs_actiondrawellipseaxis.o: rs_actiondrawellipseaxis.cpp rs_actiondrawellipseaxis.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawellipseaxis.o rs_actiondrawellipseaxis.cpp
-
-obj/rs_actiondrawhatch.o: rs_actiondrawhatch.cpp rs_actiondrawhatch.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawhatch.o rs_actiondrawhatch.cpp
-
-obj/rs_actiondrawimage.o: rs_actiondrawimage.cpp rs_actiondrawimage.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawimage.o rs_actiondrawimage.cpp
-
-obj/rs_actiondrawline.o: rs_actiondrawline.cpp rs_actiondrawline.h \
- rs_actioneditundo.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawline.o rs_actiondrawline.cpp
-
-obj/rs_actiondrawlineangle.o: rs_actiondrawlineangle.cpp rs_actiondrawlineangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlineangle.o rs_actiondrawlineangle.cpp
-
-obj/rs_actiondrawlinebisector.o: rs_actiondrawlinebisector.cpp rs_actiondrawlinebisector.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinebisector.o rs_actiondrawlinebisector.cpp
-
-obj/rs_actiondrawlinefree.o: rs_actiondrawlinefree.cpp rs_actiondrawlinefree.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinefree.o rs_actiondrawlinefree.cpp
-
-obj/rs_actiondrawlinehorvert.o: rs_actiondrawlinehorvert.cpp rs_actiondrawlinehorvert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinehorvert.o rs_actiondrawlinehorvert.cpp
-
-obj/rs_actiondrawlineparallel.o: rs_actiondrawlineparallel.cpp rs_actiondrawlineparallel.h \
- rs_actiondrawlineparallelthrough.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlineparallel.o rs_actiondrawlineparallel.cpp
-
-obj/rs_actiondrawlineparallelthrough.o: rs_actiondrawlineparallelthrough.cpp rs_actiondrawlineparallelthrough.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlineparallelthrough.o rs_actiondrawlineparallelthrough.cpp
-
-obj/rs_actiondrawlinepolygon.o: rs_actiondrawlinepolygon.cpp rs_actiondrawlinepolygon.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinepolygon.o rs_actiondrawlinepolygon.cpp
-
-obj/rs_actiondrawlinepolygon2.o: rs_actiondrawlinepolygon2.cpp rs_actiondrawlinepolygon2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinepolygon2.o rs_actiondrawlinepolygon2.cpp
-
-obj/rs_actiondrawlinerectangle.o: rs_actiondrawlinerectangle.cpp rs_actiondrawlinerectangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinerectangle.o rs_actiondrawlinerectangle.cpp
-
-obj/rs_actiondrawlinerelangle.o: rs_actiondrawlinerelangle.cpp rs_actiondrawlinerelangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinerelangle.o rs_actiondrawlinerelangle.cpp
-
-obj/rs_actiondrawlinetangent1.o: rs_actiondrawlinetangent1.cpp rs_actiondrawlinetangent1.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinetangent1.o rs_actiondrawlinetangent1.cpp
-
-obj/rs_actiondrawlinetangent2.o: rs_actiondrawlinetangent2.cpp rs_actiondrawlinetangent2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawlinetangent2.o rs_actiondrawlinetangent2.cpp
-
-obj/rs_actiondrawpoint.o: rs_actiondrawpoint.cpp rs_actiondrawpoint.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawpoint.o rs_actiondrawpoint.cpp
-
-obj/rs_actiondrawpolyline.o: rs_actiondrawpolyline.cpp rs_actiondrawpolyline.h \
- rs_actioneditundo.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawpolyline.o rs_actiondrawpolyline.cpp
-
-obj/rs_actiondrawspline.o: rs_actiondrawspline.cpp rs_actiondrawspline.h \
- rs_actioneditundo.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawspline.o rs_actiondrawspline.cpp
-
-obj/rs_actiondrawtext.o: rs_actiondrawtext.cpp rs_actiondrawtext.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiondrawtext.o rs_actiondrawtext.cpp
-
-obj/rs_actioneditcopy.o: rs_actioneditcopy.cpp rs_actioneditcopy.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioneditcopy.o rs_actioneditcopy.cpp
-
-obj/rs_actioneditpaste.o: rs_actioneditpaste.cpp rs_actioneditpaste.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioneditpaste.o rs_actioneditpaste.cpp
-
-obj/rs_actioneditundo.o: rs_actioneditundo.cpp rs_actioneditundo.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioneditundo.o rs_actioneditundo.cpp
-
-obj/rs_actionfilenew.o: rs_actionfilenew.cpp rs_actionfilenew.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionfilenew.o rs_actionfilenew.cpp
-
-obj/rs_actionfileopen.o: rs_actionfileopen.cpp rs_actionfileopen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionfileopen.o rs_actionfileopen.cpp
-
-obj/rs_actionfilesave.o: rs_actionfilesave.cpp rs_actionfilesave.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionfilesave.o rs_actionfilesave.cpp
-
-obj/rs_actionfilesaveas.o: rs_actionfilesaveas.cpp rs_actionfilesaveas.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionfilesaveas.o rs_actionfilesaveas.cpp
-
-obj/rs_actioninfoangle.o: rs_actioninfoangle.cpp rs_actioninfoangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninfoangle.o rs_actioninfoangle.cpp
-
-obj/rs_actioninfoarea.o: rs_actioninfoarea.cpp rs_actioninfoarea.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninfoarea.o rs_actioninfoarea.cpp
-
-obj/rs_actioninfoinside.o: rs_actioninfoinside.cpp rs_actioninfoinside.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninfoinside.o rs_actioninfoinside.cpp
-
-obj/rs_actioninfodist.o: rs_actioninfodist.cpp rs_actioninfodist.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninfodist.o rs_actioninfodist.cpp
-
-obj/rs_actioninfodist2.o: rs_actioninfodist2.cpp rs_actioninfodist2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninfodist2.o rs_actioninfodist2.cpp
-
-obj/rs_actioninfototallength.o: rs_actioninfototallength.cpp rs_actioninfototallength.h \
- rs_actionselectsingle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninfototallength.o rs_actioninfototallength.cpp
-
-obj/rs_actionlayersadd.o: rs_actionlayersadd.cpp rs_actionlayersadd.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlayersadd.o rs_actionlayersadd.cpp
-
-obj/rs_actionlayersedit.o: rs_actionlayersedit.cpp rs_actionlayersedit.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlayersedit.o rs_actionlayersedit.cpp
-
-obj/rs_actionlayersfreezeall.o: rs_actionlayersfreezeall.cpp rs_actionlayersfreezeall.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlayersfreezeall.o rs_actionlayersfreezeall.cpp
-
-obj/rs_actionlayersremove.o: rs_actionlayersremove.cpp rs_actionlayersremove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlayersremove.o rs_actionlayersremove.cpp
-
-obj/rs_actionlayerstogglelock.o: rs_actionlayerstogglelock.cpp rs_actionlayerstogglelock.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlayerstogglelock.o rs_actionlayerstogglelock.cpp
-
-obj/rs_actionlayerstoggleview.o: rs_actionlayerstoggleview.cpp rs_actionlayerstoggleview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlayerstoggleview.o rs_actionlayerstoggleview.cpp
-
-obj/rs_actionlibraryinsert.o: rs_actionlibraryinsert.cpp rs_actionlibraryinsert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlibraryinsert.o rs_actionlibraryinsert.cpp
-
-obj/rs_actionlockrelativezero.o: rs_actionlockrelativezero.cpp rs_actionlockrelativezero.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionlockrelativezero.o rs_actionlockrelativezero.cpp
-
-obj/rs_actionmodifyattributes.o: rs_actionmodifyattributes.cpp rs_actionmodifyattributes.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyattributes.o rs_actionmodifyattributes.cpp
-
-obj/rs_actionmodifybevel.o: rs_actionmodifybevel.cpp rs_actionmodifybevel.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifybevel.o rs_actionmodifybevel.cpp
-
-obj/rs_actionmodifycut.o: rs_actionmodifycut.cpp rs_actionmodifycut.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifycut.o rs_actionmodifycut.cpp
-
-obj/rs_actionmodifydelete.o: rs_actionmodifydelete.cpp rs_actionmodifydelete.h \
- rs_actionselectsingle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifydelete.o rs_actionmodifydelete.cpp
-
-obj/rs_actionmodifydeletefree.o: rs_actionmodifydeletefree.cpp rs_actionmodifydeletefree.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifydeletefree.o rs_actionmodifydeletefree.cpp
-
-obj/rs_actionmodifydeletequick.o: rs_actionmodifydeletequick.cpp rs_actionmodifydeletequick.h \
- rs_actionselectsingle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifydeletequick.o rs_actionmodifydeletequick.cpp
-
-obj/rs_actionmodifyentity.o: rs_actionmodifyentity.cpp rs_actionmodifyentity.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyentity.o rs_actionmodifyentity.cpp
-
-obj/rs_actionmodifymirror.o: rs_actionmodifymirror.cpp rs_actionmodifymirror.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifymirror.o rs_actionmodifymirror.cpp
-
-obj/rs_actionmodifymove.o: rs_actionmodifymove.cpp rs_actionmodifymove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifymove.o rs_actionmodifymove.cpp
-
-obj/rs_actionmodifymoverotate.o: rs_actionmodifymoverotate.cpp rs_actionmodifymoverotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifymoverotate.o rs_actionmodifymoverotate.cpp
-
-obj/rs_actionmodifyrotate.o: rs_actionmodifyrotate.cpp rs_actionmodifyrotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyrotate.o rs_actionmodifyrotate.cpp
-
-obj/rs_actionmodifyrotate2.o: rs_actionmodifyrotate2.cpp rs_actionmodifyrotate2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyrotate2.o rs_actionmodifyrotate2.cpp
-
-obj/rs_actionmodifyround.o: rs_actionmodifyround.cpp rs_actionmodifyround.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyround.o rs_actionmodifyround.cpp
-
-obj/rs_actionmodifyscale.o: rs_actionmodifyscale.cpp rs_actionmodifyscale.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyscale.o rs_actionmodifyscale.cpp
-
-obj/rs_actionmodifystretch.o: rs_actionmodifystretch.cpp rs_actionmodifystretch.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifystretch.o rs_actionmodifystretch.cpp
-
-obj/rs_actionmodifytrim.o: rs_actionmodifytrim.cpp rs_actionmodifytrim.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifytrim.o rs_actionmodifytrim.cpp
-
-obj/rs_actionmodifytrimamount.o: rs_actionmodifytrimamount.cpp rs_actionmodifytrimamount.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifytrimamount.o rs_actionmodifytrimamount.cpp
-
-obj/rs_actionmodifyexplodetext.o: rs_actionmodifyexplodetext.cpp rs_actionmodifyexplodetext.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionmodifyexplodetext.o rs_actionmodifyexplodetext.cpp
-
-obj/rs_actionoptionsdrawing.o: rs_actionoptionsdrawing.cpp rs_actionoptionsdrawing.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionoptionsdrawing.o rs_actionoptionsdrawing.cpp
-
-obj/rs_actionparisdebugcreatecontainer.o: rs_actionparisdebugcreatecontainer.cpp rs_actionparisdebugcreatecontainer.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionparisdebugcreatecontainer.o rs_actionparisdebugcreatecontainer.cpp
-
-obj/rs_actionprintpreview.o: rs_actionprintpreview.cpp rs_actionprintpreview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionprintpreview.o rs_actionprintpreview.cpp
-
-obj/rs_actionselect.o: rs_actionselect.cpp rs_actionselect.h \
- rs_actionselectsingle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselect.o rs_actionselect.cpp
-
-obj/rs_actionselectall.o: rs_actionselectall.cpp rs_actionselectall.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectall.o rs_actionselectall.cpp
-
-obj/rs_actionselectbase.o: rs_actionselectbase.cpp rs_actionselectbase.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectbase.o rs_actionselectbase.cpp
-
-obj/rs_actionselectcontour.o: rs_actionselectcontour.cpp rs_actionselectcontour.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectcontour.o rs_actionselectcontour.cpp
-
-obj/rs_actionselectintersected.o: rs_actionselectintersected.cpp rs_actionselectintersected.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectintersected.o rs_actionselectintersected.cpp
-
-obj/rs_actionselectinvert.o: rs_actionselectinvert.cpp rs_actionselectinvert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectinvert.o rs_actionselectinvert.cpp
-
-obj/rs_actionselectsingle.o: rs_actionselectsingle.cpp rs_actionselectsingle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectsingle.o rs_actionselectsingle.cpp
-
-obj/rs_actionselectwindow.o: rs_actionselectwindow.cpp rs_actionselectwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectwindow.o rs_actionselectwindow.cpp
-
-obj/rs_actionselectlayer.o: rs_actionselectlayer.cpp rs_actionselectlayer.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionselectlayer.o rs_actionselectlayer.cpp
-
-obj/rs_actionsetrelativezero.o: rs_actionsetrelativezero.cpp rs_actionsetrelativezero.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionsetrelativezero.o rs_actionsetrelativezero.cpp
-
-obj/rs_actionsetsnapmode.o: rs_actionsetsnapmode.cpp rs_actionsetsnapmode.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionsetsnapmode.o rs_actionsetsnapmode.cpp
-
-obj/rs_actionsetsnaprestriction.o: rs_actionsetsnaprestriction.cpp rs_actionsetsnaprestriction.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionsetsnaprestriction.o rs_actionsetsnaprestriction.cpp
-
-obj/rs_actionsnapintersectionmanual.o: rs_actionsnapintersectionmanual.cpp rs_actionsnapintersectionmanual.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionsnapintersectionmanual.o rs_actionsnapintersectionmanual.cpp
-
-obj/rs_actiontoolregeneratedimensions.o: rs_actiontoolregeneratedimensions.cpp rs_actiontoolregeneratedimensions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actiontoolregeneratedimensions.o rs_actiontoolregeneratedimensions.cpp
-
-obj/rs_actionzoomauto.o: rs_actionzoomauto.cpp rs_actionzoomauto.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomauto.o rs_actionzoomauto.cpp
-
-obj/rs_actionzoomautoy.o: rs_actionzoomautoy.cpp rs_actionzoomautoy.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomautoy.o rs_actionzoomautoy.cpp
-
-obj/rs_actionzoomin.o: rs_actionzoomin.cpp rs_actionzoomin.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomin.o rs_actionzoomin.cpp
-
-obj/rs_actionzoompan.o: rs_actionzoompan.cpp rs_actionzoompan.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoompan.o rs_actionzoompan.cpp
-
-obj/rs_actionzoomprevious.o: rs_actionzoomprevious.cpp rs_actionzoomprevious.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomprevious.o rs_actionzoomprevious.cpp
-
-obj/rs_actionzoomredraw.o: rs_actionzoomredraw.cpp rs_actionzoomredraw.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomredraw.o rs_actionzoomredraw.cpp
-
-obj/rs_actionzoomscroll.o: rs_actionzoomscroll.cpp rs_actionzoomscroll.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomscroll.o rs_actionzoomscroll.cpp
-
-obj/rs_actionzoomwindow.o: rs_actionzoomwindow.cpp rs_actionzoomwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actionzoomwindow.o rs_actionzoomwindow.cpp
-
-obj/moc_rs_actionblocksadd.o: moc/moc_rs_actionblocksadd.cpp rs_actionblocksadd.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksadd.o moc/moc_rs_actionblocksadd.cpp
-
-obj/moc_rs_actionblocksattributes.o: moc/moc_rs_actionblocksattributes.cpp rs_actionblocksattributes.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksattributes.o moc/moc_rs_actionblocksattributes.cpp
-
-obj/moc_rs_actionblockscreate.o: moc/moc_rs_actionblockscreate.cpp rs_actionblockscreate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblockscreate.o moc/moc_rs_actionblockscreate.cpp
-
-obj/moc_rs_actionblocksedit.o: moc/moc_rs_actionblocksedit.cpp rs_actionblocksedit.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksedit.o moc/moc_rs_actionblocksedit.cpp
-
-obj/moc_rs_actionblocksexplode.o: moc/moc_rs_actionblocksexplode.cpp rs_actionblocksexplode.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksexplode.o moc/moc_rs_actionblocksexplode.cpp
-
-obj/moc_rs_actionblocksinsert.o: moc/moc_rs_actionblocksinsert.cpp rs_actionblocksinsert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksinsert.o moc/moc_rs_actionblocksinsert.cpp
-
-obj/moc_rs_actionblocksfreezeall.o: moc/moc_rs_actionblocksfreezeall.cpp rs_actionblocksfreezeall.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksfreezeall.o moc/moc_rs_actionblocksfreezeall.cpp
-
-obj/moc_rs_actionblocksremove.o: moc/moc_rs_actionblocksremove.cpp rs_actionblocksremove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblocksremove.o moc/moc_rs_actionblocksremove.cpp
-
-obj/moc_rs_actionblockstoggleview.o: moc/moc_rs_actionblockstoggleview.cpp rs_actionblockstoggleview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionblockstoggleview.o moc/moc_rs_actionblockstoggleview.cpp
-
-obj/moc_rs_actiondefault.o: moc/moc_rs_actiondefault.cpp rs_actiondefault.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondefault.o moc/moc_rs_actiondefault.cpp
-
-obj/moc_rs_actiondimaligned.o: moc/moc_rs_actiondimaligned.cpp rs_actiondimaligned.h rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimaligned.o moc/moc_rs_actiondimaligned.cpp
-
-obj/moc_rs_actiondimangular.o: moc/moc_rs_actiondimangular.cpp rs_actiondimangular.h rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimangular.o moc/moc_rs_actiondimangular.cpp
-
-obj/moc_rs_actiondimdiametric.o: moc/moc_rs_actiondimdiametric.cpp rs_actiondimdiametric.h rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimdiametric.o moc/moc_rs_actiondimdiametric.cpp
-
-obj/moc_rs_actiondimension.o: moc/moc_rs_actiondimension.cpp rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimension.o moc/moc_rs_actiondimension.cpp
-
-obj/moc_rs_actiondimleader.o: moc/moc_rs_actiondimleader.cpp rs_actiondimleader.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimleader.o moc/moc_rs_actiondimleader.cpp
-
-obj/moc_rs_actiondimlinear.o: moc/moc_rs_actiondimlinear.cpp rs_actiondimlinear.h rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimlinear.o moc/moc_rs_actiondimlinear.cpp
-
-obj/moc_rs_actiondimradial.o: moc/moc_rs_actiondimradial.cpp rs_actiondimradial.h rs_actiondimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondimradial.o moc/moc_rs_actiondimradial.cpp
-
-obj/moc_rs_actiondrawarc.o: moc/moc_rs_actiondrawarc.cpp rs_actiondrawarc.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawarc.o moc/moc_rs_actiondrawarc.cpp
-
-obj/moc_rs_actiondrawarc3p.o: moc/moc_rs_actiondrawarc3p.cpp rs_actiondrawarc3p.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawarc3p.o moc/moc_rs_actiondrawarc3p.cpp
-
-obj/moc_rs_actiondrawarctangential.o: moc/moc_rs_actiondrawarctangential.cpp rs_actiondrawarctangential.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawarctangential.o moc/moc_rs_actiondrawarctangential.cpp
-
-obj/moc_rs_actiondrawcircle.o: moc/moc_rs_actiondrawcircle.cpp rs_actiondrawcircle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawcircle.o moc/moc_rs_actiondrawcircle.cpp
-
-obj/moc_rs_actiondrawcircle2p.o: moc/moc_rs_actiondrawcircle2p.cpp rs_actiondrawcircle2p.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawcircle2p.o moc/moc_rs_actiondrawcircle2p.cpp
-
-obj/moc_rs_actiondrawcircle3p.o: moc/moc_rs_actiondrawcircle3p.cpp rs_actiondrawcircle3p.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawcircle3p.o moc/moc_rs_actiondrawcircle3p.cpp
-
-obj/moc_rs_actiondrawcirclecr.o: moc/moc_rs_actiondrawcirclecr.cpp rs_actiondrawcirclecr.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawcirclecr.o moc/moc_rs_actiondrawcirclecr.cpp
-
-obj/moc_rs_actiondrawellipseaxis.o: moc/moc_rs_actiondrawellipseaxis.cpp rs_actiondrawellipseaxis.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawellipseaxis.o moc/moc_rs_actiondrawellipseaxis.cpp
-
-obj/moc_rs_actiondrawhatch.o: moc/moc_rs_actiondrawhatch.cpp rs_actiondrawhatch.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawhatch.o moc/moc_rs_actiondrawhatch.cpp
-
-obj/moc_rs_actiondrawimage.o: moc/moc_rs_actiondrawimage.cpp rs_actiondrawimage.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawimage.o moc/moc_rs_actiondrawimage.cpp
-
-obj/moc_rs_actiondrawline.o: moc/moc_rs_actiondrawline.cpp rs_actiondrawline.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawline.o moc/moc_rs_actiondrawline.cpp
-
-obj/moc_rs_actiondrawlineangle.o: moc/moc_rs_actiondrawlineangle.cpp rs_actiondrawlineangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlineangle.o moc/moc_rs_actiondrawlineangle.cpp
-
-obj/moc_rs_actiondrawlinebisector.o: moc/moc_rs_actiondrawlinebisector.cpp rs_actiondrawlinebisector.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinebisector.o moc/moc_rs_actiondrawlinebisector.cpp
-
-obj/moc_rs_actiondrawlinefree.o: moc/moc_rs_actiondrawlinefree.cpp rs_actiondrawlinefree.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinefree.o moc/moc_rs_actiondrawlinefree.cpp
-
-obj/moc_rs_actiondrawlinehorvert.o: moc/moc_rs_actiondrawlinehorvert.cpp rs_actiondrawlinehorvert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinehorvert.o moc/moc_rs_actiondrawlinehorvert.cpp
-
-obj/moc_rs_actiondrawlineparallel.o: moc/moc_rs_actiondrawlineparallel.cpp rs_actiondrawlineparallel.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlineparallel.o moc/moc_rs_actiondrawlineparallel.cpp
-
-obj/moc_rs_actiondrawlineparallelthrough.o: moc/moc_rs_actiondrawlineparallelthrough.cpp rs_actiondrawlineparallelthrough.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlineparallelthrough.o moc/moc_rs_actiondrawlineparallelthrough.cpp
-
-obj/moc_rs_actiondrawlinepolygon.o: moc/moc_rs_actiondrawlinepolygon.cpp rs_actiondrawlinepolygon.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinepolygon.o moc/moc_rs_actiondrawlinepolygon.cpp
-
-obj/moc_rs_actiondrawlinepolygon2.o: moc/moc_rs_actiondrawlinepolygon2.cpp rs_actiondrawlinepolygon2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinepolygon2.o moc/moc_rs_actiondrawlinepolygon2.cpp
-
-obj/moc_rs_actiondrawlinerectangle.o: moc/moc_rs_actiondrawlinerectangle.cpp rs_actiondrawlinerectangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinerectangle.o moc/moc_rs_actiondrawlinerectangle.cpp
-
-obj/moc_rs_actiondrawlinerelangle.o: moc/moc_rs_actiondrawlinerelangle.cpp rs_actiondrawlinerelangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinerelangle.o moc/moc_rs_actiondrawlinerelangle.cpp
-
-obj/moc_rs_actiondrawlinetangent1.o: moc/moc_rs_actiondrawlinetangent1.cpp rs_actiondrawlinetangent1.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinetangent1.o moc/moc_rs_actiondrawlinetangent1.cpp
-
-obj/moc_rs_actiondrawlinetangent2.o: moc/moc_rs_actiondrawlinetangent2.cpp rs_actiondrawlinetangent2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawlinetangent2.o moc/moc_rs_actiondrawlinetangent2.cpp
-
-obj/moc_rs_actiondrawpoint.o: moc/moc_rs_actiondrawpoint.cpp rs_actiondrawpoint.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawpoint.o moc/moc_rs_actiondrawpoint.cpp
-
-obj/moc_rs_actiondrawpolyline.o: moc/moc_rs_actiondrawpolyline.cpp rs_actiondrawpolyline.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawpolyline.o moc/moc_rs_actiondrawpolyline.cpp
-
-obj/moc_rs_actiondrawspline.o: moc/moc_rs_actiondrawspline.cpp rs_actiondrawspline.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawspline.o moc/moc_rs_actiondrawspline.cpp
-
-obj/moc_rs_actiondrawtext.o: moc/moc_rs_actiondrawtext.cpp rs_actiondrawtext.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiondrawtext.o moc/moc_rs_actiondrawtext.cpp
-
-obj/moc_rs_actioneditcopy.o: moc/moc_rs_actioneditcopy.cpp rs_actioneditcopy.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioneditcopy.o moc/moc_rs_actioneditcopy.cpp
-
-obj/moc_rs_actioneditpaste.o: moc/moc_rs_actioneditpaste.cpp rs_actioneditpaste.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioneditpaste.o moc/moc_rs_actioneditpaste.cpp
-
-obj/moc_rs_actioneditundo.o: moc/moc_rs_actioneditundo.cpp rs_actioneditundo.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioneditundo.o moc/moc_rs_actioneditundo.cpp
-
-obj/moc_rs_actionfilenew.o: moc/moc_rs_actionfilenew.cpp rs_actionfilenew.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionfilenew.o moc/moc_rs_actionfilenew.cpp
-
-obj/moc_rs_actionfileopen.o: moc/moc_rs_actionfileopen.cpp rs_actionfileopen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionfileopen.o moc/moc_rs_actionfileopen.cpp
-
-obj/moc_rs_actionfilesave.o: moc/moc_rs_actionfilesave.cpp rs_actionfilesave.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionfilesave.o moc/moc_rs_actionfilesave.cpp
-
-obj/moc_rs_actionfilesaveas.o: moc/moc_rs_actionfilesaveas.cpp rs_actionfilesaveas.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionfilesaveas.o moc/moc_rs_actionfilesaveas.cpp
-
-obj/moc_rs_actioninfoangle.o: moc/moc_rs_actioninfoangle.cpp rs_actioninfoangle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninfoangle.o moc/moc_rs_actioninfoangle.cpp
-
-obj/moc_rs_actioninfoarea.o: moc/moc_rs_actioninfoarea.cpp rs_actioninfoarea.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninfoarea.o moc/moc_rs_actioninfoarea.cpp
-
-obj/moc_rs_actioninfoinside.o: moc/moc_rs_actioninfoinside.cpp rs_actioninfoinside.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninfoinside.o moc/moc_rs_actioninfoinside.cpp
-
-obj/moc_rs_actioninfodist.o: moc/moc_rs_actioninfodist.cpp rs_actioninfodist.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninfodist.o moc/moc_rs_actioninfodist.cpp
-
-obj/moc_rs_actioninfodist2.o: moc/moc_rs_actioninfodist2.cpp rs_actioninfodist2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninfodist2.o moc/moc_rs_actioninfodist2.cpp
-
-obj/moc_rs_actioninfototallength.o: moc/moc_rs_actioninfototallength.cpp rs_actioninfototallength.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninfototallength.o moc/moc_rs_actioninfototallength.cpp
-
-obj/moc_rs_actionlayersadd.o: moc/moc_rs_actionlayersadd.cpp rs_actionlayersadd.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlayersadd.o moc/moc_rs_actionlayersadd.cpp
-
-obj/moc_rs_actionlayersedit.o: moc/moc_rs_actionlayersedit.cpp rs_actionlayersedit.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlayersedit.o moc/moc_rs_actionlayersedit.cpp
-
-obj/moc_rs_actionlayersfreezeall.o: moc/moc_rs_actionlayersfreezeall.cpp rs_actionlayersfreezeall.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlayersfreezeall.o moc/moc_rs_actionlayersfreezeall.cpp
-
-obj/moc_rs_actionlayersremove.o: moc/moc_rs_actionlayersremove.cpp rs_actionlayersremove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlayersremove.o moc/moc_rs_actionlayersremove.cpp
-
-obj/moc_rs_actionlayerstogglelock.o: moc/moc_rs_actionlayerstogglelock.cpp rs_actionlayerstogglelock.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlayerstogglelock.o moc/moc_rs_actionlayerstogglelock.cpp
-
-obj/moc_rs_actionlayerstoggleview.o: moc/moc_rs_actionlayerstoggleview.cpp rs_actionlayerstoggleview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlayerstoggleview.o moc/moc_rs_actionlayerstoggleview.cpp
-
-obj/moc_rs_actionlibraryinsert.o: moc/moc_rs_actionlibraryinsert.cpp rs_actionlibraryinsert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlibraryinsert.o moc/moc_rs_actionlibraryinsert.cpp
-
-obj/moc_rs_actionlockrelativezero.o: moc/moc_rs_actionlockrelativezero.cpp rs_actionlockrelativezero.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionlockrelativezero.o moc/moc_rs_actionlockrelativezero.cpp
-
-obj/moc_rs_actionmodifyattributes.o: moc/moc_rs_actionmodifyattributes.cpp rs_actionmodifyattributes.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyattributes.o moc/moc_rs_actionmodifyattributes.cpp
-
-obj/moc_rs_actionmodifybevel.o: moc/moc_rs_actionmodifybevel.cpp rs_actionmodifybevel.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifybevel.o moc/moc_rs_actionmodifybevel.cpp
-
-obj/moc_rs_actionmodifycut.o: moc/moc_rs_actionmodifycut.cpp rs_actionmodifycut.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifycut.o moc/moc_rs_actionmodifycut.cpp
-
-obj/moc_rs_actionmodifydelete.o: moc/moc_rs_actionmodifydelete.cpp rs_actionmodifydelete.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifydelete.o moc/moc_rs_actionmodifydelete.cpp
-
-obj/moc_rs_actionmodifydeletefree.o: moc/moc_rs_actionmodifydeletefree.cpp rs_actionmodifydeletefree.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifydeletefree.o moc/moc_rs_actionmodifydeletefree.cpp
-
-obj/moc_rs_actionmodifydeletequick.o: moc/moc_rs_actionmodifydeletequick.cpp rs_actionmodifydeletequick.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifydeletequick.o moc/moc_rs_actionmodifydeletequick.cpp
-
-obj/moc_rs_actionmodifyentity.o: moc/moc_rs_actionmodifyentity.cpp rs_actionmodifyentity.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyentity.o moc/moc_rs_actionmodifyentity.cpp
-
-obj/moc_rs_actionmodifymirror.o: moc/moc_rs_actionmodifymirror.cpp rs_actionmodifymirror.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifymirror.o moc/moc_rs_actionmodifymirror.cpp
-
-obj/moc_rs_actionmodifymove.o: moc/moc_rs_actionmodifymove.cpp rs_actionmodifymove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifymove.o moc/moc_rs_actionmodifymove.cpp
-
-obj/moc_rs_actionmodifymoverotate.o: moc/moc_rs_actionmodifymoverotate.cpp rs_actionmodifymoverotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifymoverotate.o moc/moc_rs_actionmodifymoverotate.cpp
-
-obj/moc_rs_actionmodifyrotate.o: moc/moc_rs_actionmodifyrotate.cpp rs_actionmodifyrotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyrotate.o moc/moc_rs_actionmodifyrotate.cpp
-
-obj/moc_rs_actionmodifyrotate2.o: moc/moc_rs_actionmodifyrotate2.cpp rs_actionmodifyrotate2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyrotate2.o moc/moc_rs_actionmodifyrotate2.cpp
-
-obj/moc_rs_actionmodifyround.o: moc/moc_rs_actionmodifyround.cpp rs_actionmodifyround.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyround.o moc/moc_rs_actionmodifyround.cpp
-
-obj/moc_rs_actionmodifyscale.o: moc/moc_rs_actionmodifyscale.cpp rs_actionmodifyscale.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyscale.o moc/moc_rs_actionmodifyscale.cpp
-
-obj/moc_rs_actionmodifystretch.o: moc/moc_rs_actionmodifystretch.cpp rs_actionmodifystretch.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifystretch.o moc/moc_rs_actionmodifystretch.cpp
-
-obj/moc_rs_actionmodifytrim.o: moc/moc_rs_actionmodifytrim.cpp rs_actionmodifytrim.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifytrim.o moc/moc_rs_actionmodifytrim.cpp
-
-obj/moc_rs_actionmodifytrimamount.o: moc/moc_rs_actionmodifytrimamount.cpp rs_actionmodifytrimamount.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifytrimamount.o moc/moc_rs_actionmodifytrimamount.cpp
-
-obj/moc_rs_actionmodifyexplodetext.o: moc/moc_rs_actionmodifyexplodetext.cpp rs_actionmodifyexplodetext.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionmodifyexplodetext.o moc/moc_rs_actionmodifyexplodetext.cpp
-
-obj/moc_rs_actionoptionsdrawing.o: moc/moc_rs_actionoptionsdrawing.cpp rs_actionoptionsdrawing.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionoptionsdrawing.o moc/moc_rs_actionoptionsdrawing.cpp
-
-obj/moc_rs_actionparisdebugcreatecontainer.o: moc/moc_rs_actionparisdebugcreatecontainer.cpp rs_actionparisdebugcreatecontainer.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionparisdebugcreatecontainer.o moc/moc_rs_actionparisdebugcreatecontainer.cpp
-
-obj/moc_rs_actionprintpreview.o: moc/moc_rs_actionprintpreview.cpp rs_actionprintpreview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionprintpreview.o moc/moc_rs_actionprintpreview.cpp
-
-obj/moc_rs_actionselect.o: moc/moc_rs_actionselect.cpp rs_actionselect.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselect.o moc/moc_rs_actionselect.cpp
-
-obj/moc_rs_actionselectall.o: moc/moc_rs_actionselectall.cpp rs_actionselectall.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectall.o moc/moc_rs_actionselectall.cpp
-
-obj/moc_rs_actionselectbase.o: moc/moc_rs_actionselectbase.cpp rs_actionselectbase.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectbase.o moc/moc_rs_actionselectbase.cpp
-
-obj/moc_rs_actionselectcontour.o: moc/moc_rs_actionselectcontour.cpp rs_actionselectcontour.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectcontour.o moc/moc_rs_actionselectcontour.cpp
-
-obj/moc_rs_actionselectintersected.o: moc/moc_rs_actionselectintersected.cpp rs_actionselectintersected.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectintersected.o moc/moc_rs_actionselectintersected.cpp
-
-obj/moc_rs_actionselectinvert.o: moc/moc_rs_actionselectinvert.cpp rs_actionselectinvert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectinvert.o moc/moc_rs_actionselectinvert.cpp
-
-obj/moc_rs_actionselectsingle.o: moc/moc_rs_actionselectsingle.cpp rs_actionselectsingle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectsingle.o moc/moc_rs_actionselectsingle.cpp
-
-obj/moc_rs_actionselectwindow.o: moc/moc_rs_actionselectwindow.cpp rs_actionselectwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectwindow.o moc/moc_rs_actionselectwindow.cpp
-
-obj/moc_rs_actionselectlayer.o: moc/moc_rs_actionselectlayer.cpp rs_actionselectlayer.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionselectlayer.o moc/moc_rs_actionselectlayer.cpp
-
-obj/moc_rs_actionsetrelativezero.o: moc/moc_rs_actionsetrelativezero.cpp rs_actionsetrelativezero.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionsetrelativezero.o moc/moc_rs_actionsetrelativezero.cpp
-
-obj/moc_rs_actionsetsnapmode.o: moc/moc_rs_actionsetsnapmode.cpp rs_actionsetsnapmode.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionsetsnapmode.o moc/moc_rs_actionsetsnapmode.cpp
-
-obj/moc_rs_actionsetsnaprestriction.o: moc/moc_rs_actionsetsnaprestriction.cpp rs_actionsetsnaprestriction.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionsetsnaprestriction.o moc/moc_rs_actionsetsnaprestriction.cpp
-
-obj/moc_rs_actionsnapintersectionmanual.o: moc/moc_rs_actionsnapintersectionmanual.cpp rs_actionsnapintersectionmanual.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionsnapintersectionmanual.o moc/moc_rs_actionsnapintersectionmanual.cpp
-
-obj/moc_rs_actiontoolregeneratedimensions.o: moc/moc_rs_actiontoolregeneratedimensions.cpp rs_actiontoolregeneratedimensions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actiontoolregeneratedimensions.o moc/moc_rs_actiontoolregeneratedimensions.cpp
-
-obj/moc_rs_actionzoomauto.o: moc/moc_rs_actionzoomauto.cpp rs_actionzoomauto.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomauto.o moc/moc_rs_actionzoomauto.cpp
-
-obj/moc_rs_actionzoomautoy.o: moc/moc_rs_actionzoomautoy.cpp rs_actionzoomautoy.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomautoy.o moc/moc_rs_actionzoomautoy.cpp
-
-obj/moc_rs_actionzoomin.o: moc/moc_rs_actionzoomin.cpp rs_actionzoomin.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomin.o moc/moc_rs_actionzoomin.cpp
-
-obj/moc_rs_actionzoompan.o: moc/moc_rs_actionzoompan.cpp rs_actionzoompan.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoompan.o moc/moc_rs_actionzoompan.cpp
-
-obj/moc_rs_actionzoomprevious.o: moc/moc_rs_actionzoomprevious.cpp rs_actionzoomprevious.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomprevious.o moc/moc_rs_actionzoomprevious.cpp
-
-obj/moc_rs_actionzoomredraw.o: moc/moc_rs_actionzoomredraw.cpp rs_actionzoomredraw.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomredraw.o moc/moc_rs_actionzoomredraw.cpp
-
-obj/moc_rs_actionzoomscroll.o: moc/moc_rs_actionzoomscroll.cpp rs_actionzoomscroll.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomscroll.o moc/moc_rs_actionzoomscroll.cpp
-
-obj/moc_rs_actionzoomwindow.o: moc/moc_rs_actionzoomwindow.cpp rs_actionzoomwindow.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actionzoomwindow.o moc/moc_rs_actionzoomwindow.cpp
-
-moc/moc_rs_actionblocksadd.cpp: $(MOC) rs_actionblocksadd.h
- $(MOC) rs_actionblocksadd.h -o moc/moc_rs_actionblocksadd.cpp
-
-moc/moc_rs_actionblocksattributes.cpp: $(MOC) rs_actionblocksattributes.h
- $(MOC) rs_actionblocksattributes.h -o moc/moc_rs_actionblocksattributes.cpp
-
-moc/moc_rs_actionblockscreate.cpp: $(MOC) rs_actionblockscreate.h
- $(MOC) rs_actionblockscreate.h -o moc/moc_rs_actionblockscreate.cpp
-
-moc/moc_rs_actionblocksedit.cpp: $(MOC) rs_actionblocksedit.h
- $(MOC) rs_actionblocksedit.h -o moc/moc_rs_actionblocksedit.cpp
-
-moc/moc_rs_actionblocksexplode.cpp: $(MOC) rs_actionblocksexplode.h
- $(MOC) rs_actionblocksexplode.h -o moc/moc_rs_actionblocksexplode.cpp
-
-moc/moc_rs_actionblocksinsert.cpp: $(MOC) rs_actionblocksinsert.h
- $(MOC) rs_actionblocksinsert.h -o moc/moc_rs_actionblocksinsert.cpp
-
-moc/moc_rs_actionblocksfreezeall.cpp: $(MOC) rs_actionblocksfreezeall.h
- $(MOC) rs_actionblocksfreezeall.h -o moc/moc_rs_actionblocksfreezeall.cpp
-
-moc/moc_rs_actionblocksremove.cpp: $(MOC) rs_actionblocksremove.h
- $(MOC) rs_actionblocksremove.h -o moc/moc_rs_actionblocksremove.cpp
-
-moc/moc_rs_actionblockstoggleview.cpp: $(MOC) rs_actionblockstoggleview.h
- $(MOC) rs_actionblockstoggleview.h -o moc/moc_rs_actionblockstoggleview.cpp
-
-moc/moc_rs_actiondefault.cpp: $(MOC) rs_actiondefault.h
- $(MOC) rs_actiondefault.h -o moc/moc_rs_actiondefault.cpp
-
-moc/moc_rs_actiondimaligned.cpp: $(MOC) rs_actiondimaligned.h
- $(MOC) rs_actiondimaligned.h -o moc/moc_rs_actiondimaligned.cpp
-
-moc/moc_rs_actiondimangular.cpp: $(MOC) rs_actiondimangular.h
- $(MOC) rs_actiondimangular.h -o moc/moc_rs_actiondimangular.cpp
-
-moc/moc_rs_actiondimdiametric.cpp: $(MOC) rs_actiondimdiametric.h
- $(MOC) rs_actiondimdiametric.h -o moc/moc_rs_actiondimdiametric.cpp
-
-moc/moc_rs_actiondimension.cpp: $(MOC) rs_actiondimension.h
- $(MOC) rs_actiondimension.h -o moc/moc_rs_actiondimension.cpp
-
-moc/moc_rs_actiondimleader.cpp: $(MOC) rs_actiondimleader.h
- $(MOC) rs_actiondimleader.h -o moc/moc_rs_actiondimleader.cpp
-
-moc/moc_rs_actiondimlinear.cpp: $(MOC) rs_actiondimlinear.h
- $(MOC) rs_actiondimlinear.h -o moc/moc_rs_actiondimlinear.cpp
-
-moc/moc_rs_actiondimradial.cpp: $(MOC) rs_actiondimradial.h
- $(MOC) rs_actiondimradial.h -o moc/moc_rs_actiondimradial.cpp
-
-moc/moc_rs_actiondrawarc.cpp: $(MOC) rs_actiondrawarc.h
- $(MOC) rs_actiondrawarc.h -o moc/moc_rs_actiondrawarc.cpp
-
-moc/moc_rs_actiondrawarc3p.cpp: $(MOC) rs_actiondrawarc3p.h
- $(MOC) rs_actiondrawarc3p.h -o moc/moc_rs_actiondrawarc3p.cpp
-
-moc/moc_rs_actiondrawarctangential.cpp: $(MOC) rs_actiondrawarctangential.h
- $(MOC) rs_actiondrawarctangential.h -o moc/moc_rs_actiondrawarctangential.cpp
-
-moc/moc_rs_actiondrawcircle.cpp: $(MOC) rs_actiondrawcircle.h
- $(MOC) rs_actiondrawcircle.h -o moc/moc_rs_actiondrawcircle.cpp
-
-moc/moc_rs_actiondrawcircle2p.cpp: $(MOC) rs_actiondrawcircle2p.h
- $(MOC) rs_actiondrawcircle2p.h -o moc/moc_rs_actiondrawcircle2p.cpp
-
-moc/moc_rs_actiondrawcircle3p.cpp: $(MOC) rs_actiondrawcircle3p.h
- $(MOC) rs_actiondrawcircle3p.h -o moc/moc_rs_actiondrawcircle3p.cpp
-
-moc/moc_rs_actiondrawcirclecr.cpp: $(MOC) rs_actiondrawcirclecr.h
- $(MOC) rs_actiondrawcirclecr.h -o moc/moc_rs_actiondrawcirclecr.cpp
-
-moc/moc_rs_actiondrawellipseaxis.cpp: $(MOC) rs_actiondrawellipseaxis.h
- $(MOC) rs_actiondrawellipseaxis.h -o moc/moc_rs_actiondrawellipseaxis.cpp
-
-moc/moc_rs_actiondrawhatch.cpp: $(MOC) rs_actiondrawhatch.h
- $(MOC) rs_actiondrawhatch.h -o moc/moc_rs_actiondrawhatch.cpp
-
-moc/moc_rs_actiondrawimage.cpp: $(MOC) rs_actiondrawimage.h
- $(MOC) rs_actiondrawimage.h -o moc/moc_rs_actiondrawimage.cpp
-
-moc/moc_rs_actiondrawline.cpp: $(MOC) rs_actiondrawline.h
- $(MOC) rs_actiondrawline.h -o moc/moc_rs_actiondrawline.cpp
-
-moc/moc_rs_actiondrawlineangle.cpp: $(MOC) rs_actiondrawlineangle.h
- $(MOC) rs_actiondrawlineangle.h -o moc/moc_rs_actiondrawlineangle.cpp
-
-moc/moc_rs_actiondrawlinebisector.cpp: $(MOC) rs_actiondrawlinebisector.h
- $(MOC) rs_actiondrawlinebisector.h -o moc/moc_rs_actiondrawlinebisector.cpp
-
-moc/moc_rs_actiondrawlinefree.cpp: $(MOC) rs_actiondrawlinefree.h
- $(MOC) rs_actiondrawlinefree.h -o moc/moc_rs_actiondrawlinefree.cpp
-
-moc/moc_rs_actiondrawlinehorvert.cpp: $(MOC) rs_actiondrawlinehorvert.h
- $(MOC) rs_actiondrawlinehorvert.h -o moc/moc_rs_actiondrawlinehorvert.cpp
-
-moc/moc_rs_actiondrawlineparallel.cpp: $(MOC) rs_actiondrawlineparallel.h
- $(MOC) rs_actiondrawlineparallel.h -o moc/moc_rs_actiondrawlineparallel.cpp
-
-moc/moc_rs_actiondrawlineparallelthrough.cpp: $(MOC) rs_actiondrawlineparallelthrough.h
- $(MOC) rs_actiondrawlineparallelthrough.h -o moc/moc_rs_actiondrawlineparallelthrough.cpp
-
-moc/moc_rs_actiondrawlinepolygon.cpp: $(MOC) rs_actiondrawlinepolygon.h
- $(MOC) rs_actiondrawlinepolygon.h -o moc/moc_rs_actiondrawlinepolygon.cpp
-
-moc/moc_rs_actiondrawlinepolygon2.cpp: $(MOC) rs_actiondrawlinepolygon2.h
- $(MOC) rs_actiondrawlinepolygon2.h -o moc/moc_rs_actiondrawlinepolygon2.cpp
-
-moc/moc_rs_actiondrawlinerectangle.cpp: $(MOC) rs_actiondrawlinerectangle.h
- $(MOC) rs_actiondrawlinerectangle.h -o moc/moc_rs_actiondrawlinerectangle.cpp
-
-moc/moc_rs_actiondrawlinerelangle.cpp: $(MOC) rs_actiondrawlinerelangle.h
- $(MOC) rs_actiondrawlinerelangle.h -o moc/moc_rs_actiondrawlinerelangle.cpp
-
-moc/moc_rs_actiondrawlinetangent1.cpp: $(MOC) rs_actiondrawlinetangent1.h
- $(MOC) rs_actiondrawlinetangent1.h -o moc/moc_rs_actiondrawlinetangent1.cpp
-
-moc/moc_rs_actiondrawlinetangent2.cpp: $(MOC) rs_actiondrawlinetangent2.h
- $(MOC) rs_actiondrawlinetangent2.h -o moc/moc_rs_actiondrawlinetangent2.cpp
-
-moc/moc_rs_actiondrawpoint.cpp: $(MOC) rs_actiondrawpoint.h
- $(MOC) rs_actiondrawpoint.h -o moc/moc_rs_actiondrawpoint.cpp
-
-moc/moc_rs_actiondrawpolyline.cpp: $(MOC) rs_actiondrawpolyline.h
- $(MOC) rs_actiondrawpolyline.h -o moc/moc_rs_actiondrawpolyline.cpp
-
-moc/moc_rs_actiondrawspline.cpp: $(MOC) rs_actiondrawspline.h
- $(MOC) rs_actiondrawspline.h -o moc/moc_rs_actiondrawspline.cpp
-
-moc/moc_rs_actiondrawtext.cpp: $(MOC) rs_actiondrawtext.h
- $(MOC) rs_actiondrawtext.h -o moc/moc_rs_actiondrawtext.cpp
-
-moc/moc_rs_actioneditcopy.cpp: $(MOC) rs_actioneditcopy.h
- $(MOC) rs_actioneditcopy.h -o moc/moc_rs_actioneditcopy.cpp
-
-moc/moc_rs_actioneditpaste.cpp: $(MOC) rs_actioneditpaste.h
- $(MOC) rs_actioneditpaste.h -o moc/moc_rs_actioneditpaste.cpp
-
-moc/moc_rs_actioneditundo.cpp: $(MOC) rs_actioneditundo.h
- $(MOC) rs_actioneditundo.h -o moc/moc_rs_actioneditundo.cpp
-
-moc/moc_rs_actionfilenew.cpp: $(MOC) rs_actionfilenew.h
- $(MOC) rs_actionfilenew.h -o moc/moc_rs_actionfilenew.cpp
-
-moc/moc_rs_actionfileopen.cpp: $(MOC) rs_actionfileopen.h
- $(MOC) rs_actionfileopen.h -o moc/moc_rs_actionfileopen.cpp
-
-moc/moc_rs_actionfilesave.cpp: $(MOC) rs_actionfilesave.h
- $(MOC) rs_actionfilesave.h -o moc/moc_rs_actionfilesave.cpp
-
-moc/moc_rs_actionfilesaveas.cpp: $(MOC) rs_actionfilesaveas.h
- $(MOC) rs_actionfilesaveas.h -o moc/moc_rs_actionfilesaveas.cpp
-
-moc/moc_rs_actioninfoangle.cpp: $(MOC) rs_actioninfoangle.h
- $(MOC) rs_actioninfoangle.h -o moc/moc_rs_actioninfoangle.cpp
-
-moc/moc_rs_actioninfoarea.cpp: $(MOC) rs_actioninfoarea.h
- $(MOC) rs_actioninfoarea.h -o moc/moc_rs_actioninfoarea.cpp
-
-moc/moc_rs_actioninfoinside.cpp: $(MOC) rs_actioninfoinside.h
- $(MOC) rs_actioninfoinside.h -o moc/moc_rs_actioninfoinside.cpp
-
-moc/moc_rs_actioninfodist.cpp: $(MOC) rs_actioninfodist.h
- $(MOC) rs_actioninfodist.h -o moc/moc_rs_actioninfodist.cpp
-
-moc/moc_rs_actioninfodist2.cpp: $(MOC) rs_actioninfodist2.h
- $(MOC) rs_actioninfodist2.h -o moc/moc_rs_actioninfodist2.cpp
-
-moc/moc_rs_actioninfototallength.cpp: $(MOC) rs_actioninfototallength.h
- $(MOC) rs_actioninfototallength.h -o moc/moc_rs_actioninfototallength.cpp
-
-moc/moc_rs_actionlayersadd.cpp: $(MOC) rs_actionlayersadd.h
- $(MOC) rs_actionlayersadd.h -o moc/moc_rs_actionlayersadd.cpp
-
-moc/moc_rs_actionlayersedit.cpp: $(MOC) rs_actionlayersedit.h
- $(MOC) rs_actionlayersedit.h -o moc/moc_rs_actionlayersedit.cpp
-
-moc/moc_rs_actionlayersfreezeall.cpp: $(MOC) rs_actionlayersfreezeall.h
- $(MOC) rs_actionlayersfreezeall.h -o moc/moc_rs_actionlayersfreezeall.cpp
-
-moc/moc_rs_actionlayersremove.cpp: $(MOC) rs_actionlayersremove.h
- $(MOC) rs_actionlayersremove.h -o moc/moc_rs_actionlayersremove.cpp
-
-moc/moc_rs_actionlayerstogglelock.cpp: $(MOC) rs_actionlayerstogglelock.h
- $(MOC) rs_actionlayerstogglelock.h -o moc/moc_rs_actionlayerstogglelock.cpp
-
-moc/moc_rs_actionlayerstoggleview.cpp: $(MOC) rs_actionlayerstoggleview.h
- $(MOC) rs_actionlayerstoggleview.h -o moc/moc_rs_actionlayerstoggleview.cpp
-
-moc/moc_rs_actionlibraryinsert.cpp: $(MOC) rs_actionlibraryinsert.h
- $(MOC) rs_actionlibraryinsert.h -o moc/moc_rs_actionlibraryinsert.cpp
-
-moc/moc_rs_actionlockrelativezero.cpp: $(MOC) rs_actionlockrelativezero.h
- $(MOC) rs_actionlockrelativezero.h -o moc/moc_rs_actionlockrelativezero.cpp
-
-moc/moc_rs_actionmodifyattributes.cpp: $(MOC) rs_actionmodifyattributes.h
- $(MOC) rs_actionmodifyattributes.h -o moc/moc_rs_actionmodifyattributes.cpp
-
-moc/moc_rs_actionmodifybevel.cpp: $(MOC) rs_actionmodifybevel.h
- $(MOC) rs_actionmodifybevel.h -o moc/moc_rs_actionmodifybevel.cpp
-
-moc/moc_rs_actionmodifycut.cpp: $(MOC) rs_actionmodifycut.h
- $(MOC) rs_actionmodifycut.h -o moc/moc_rs_actionmodifycut.cpp
-
-moc/moc_rs_actionmodifydelete.cpp: $(MOC) rs_actionmodifydelete.h
- $(MOC) rs_actionmodifydelete.h -o moc/moc_rs_actionmodifydelete.cpp
-
-moc/moc_rs_actionmodifydeletefree.cpp: $(MOC) rs_actionmodifydeletefree.h
- $(MOC) rs_actionmodifydeletefree.h -o moc/moc_rs_actionmodifydeletefree.cpp
-
-moc/moc_rs_actionmodifydeletequick.cpp: $(MOC) rs_actionmodifydeletequick.h
- $(MOC) rs_actionmodifydeletequick.h -o moc/moc_rs_actionmodifydeletequick.cpp
-
-moc/moc_rs_actionmodifyentity.cpp: $(MOC) rs_actionmodifyentity.h
- $(MOC) rs_actionmodifyentity.h -o moc/moc_rs_actionmodifyentity.cpp
-
-moc/moc_rs_actionmodifymirror.cpp: $(MOC) rs_actionmodifymirror.h
- $(MOC) rs_actionmodifymirror.h -o moc/moc_rs_actionmodifymirror.cpp
-
-moc/moc_rs_actionmodifymove.cpp: $(MOC) rs_actionmodifymove.h
- $(MOC) rs_actionmodifymove.h -o moc/moc_rs_actionmodifymove.cpp
-
-moc/moc_rs_actionmodifymoverotate.cpp: $(MOC) rs_actionmodifymoverotate.h
- $(MOC) rs_actionmodifymoverotate.h -o moc/moc_rs_actionmodifymoverotate.cpp
-
-moc/moc_rs_actionmodifyrotate.cpp: $(MOC) rs_actionmodifyrotate.h
- $(MOC) rs_actionmodifyrotate.h -o moc/moc_rs_actionmodifyrotate.cpp
-
-moc/moc_rs_actionmodifyrotate2.cpp: $(MOC) rs_actionmodifyrotate2.h
- $(MOC) rs_actionmodifyrotate2.h -o moc/moc_rs_actionmodifyrotate2.cpp
-
-moc/moc_rs_actionmodifyround.cpp: $(MOC) rs_actionmodifyround.h
- $(MOC) rs_actionmodifyround.h -o moc/moc_rs_actionmodifyround.cpp
-
-moc/moc_rs_actionmodifyscale.cpp: $(MOC) rs_actionmodifyscale.h
- $(MOC) rs_actionmodifyscale.h -o moc/moc_rs_actionmodifyscale.cpp
-
-moc/moc_rs_actionmodifystretch.cpp: $(MOC) rs_actionmodifystretch.h
- $(MOC) rs_actionmodifystretch.h -o moc/moc_rs_actionmodifystretch.cpp
-
-moc/moc_rs_actionmodifytrim.cpp: $(MOC) rs_actionmodifytrim.h
- $(MOC) rs_actionmodifytrim.h -o moc/moc_rs_actionmodifytrim.cpp
-
-moc/moc_rs_actionmodifytrimamount.cpp: $(MOC) rs_actionmodifytrimamount.h
- $(MOC) rs_actionmodifytrimamount.h -o moc/moc_rs_actionmodifytrimamount.cpp
-
-moc/moc_rs_actionmodifyexplodetext.cpp: $(MOC) rs_actionmodifyexplodetext.h
- $(MOC) rs_actionmodifyexplodetext.h -o moc/moc_rs_actionmodifyexplodetext.cpp
-
-moc/moc_rs_actionoptionsdrawing.cpp: $(MOC) rs_actionoptionsdrawing.h
- $(MOC) rs_actionoptionsdrawing.h -o moc/moc_rs_actionoptionsdrawing.cpp
-
-moc/moc_rs_actionparisdebugcreatecontainer.cpp: $(MOC) rs_actionparisdebugcreatecontainer.h
- $(MOC) rs_actionparisdebugcreatecontainer.h -o moc/moc_rs_actionparisdebugcreatecontainer.cpp
-
-moc/moc_rs_actionprintpreview.cpp: $(MOC) rs_actionprintpreview.h
- $(MOC) rs_actionprintpreview.h -o moc/moc_rs_actionprintpreview.cpp
-
-moc/moc_rs_actionselect.cpp: $(MOC) rs_actionselect.h
- $(MOC) rs_actionselect.h -o moc/moc_rs_actionselect.cpp
-
-moc/moc_rs_actionselectall.cpp: $(MOC) rs_actionselectall.h
- $(MOC) rs_actionselectall.h -o moc/moc_rs_actionselectall.cpp
-
-moc/moc_rs_actionselectbase.cpp: $(MOC) rs_actionselectbase.h
- $(MOC) rs_actionselectbase.h -o moc/moc_rs_actionselectbase.cpp
-
-moc/moc_rs_actionselectcontour.cpp: $(MOC) rs_actionselectcontour.h
- $(MOC) rs_actionselectcontour.h -o moc/moc_rs_actionselectcontour.cpp
-
-moc/moc_rs_actionselectintersected.cpp: $(MOC) rs_actionselectintersected.h
- $(MOC) rs_actionselectintersected.h -o moc/moc_rs_actionselectintersected.cpp
-
-moc/moc_rs_actionselectinvert.cpp: $(MOC) rs_actionselectinvert.h
- $(MOC) rs_actionselectinvert.h -o moc/moc_rs_actionselectinvert.cpp
-
-moc/moc_rs_actionselectsingle.cpp: $(MOC) rs_actionselectsingle.h
- $(MOC) rs_actionselectsingle.h -o moc/moc_rs_actionselectsingle.cpp
-
-moc/moc_rs_actionselectwindow.cpp: $(MOC) rs_actionselectwindow.h
- $(MOC) rs_actionselectwindow.h -o moc/moc_rs_actionselectwindow.cpp
-
-moc/moc_rs_actionselectlayer.cpp: $(MOC) rs_actionselectlayer.h
- $(MOC) rs_actionselectlayer.h -o moc/moc_rs_actionselectlayer.cpp
-
-moc/moc_rs_actionsetrelativezero.cpp: $(MOC) rs_actionsetrelativezero.h
- $(MOC) rs_actionsetrelativezero.h -o moc/moc_rs_actionsetrelativezero.cpp
-
-moc/moc_rs_actionsetsnapmode.cpp: $(MOC) rs_actionsetsnapmode.h
- $(MOC) rs_actionsetsnapmode.h -o moc/moc_rs_actionsetsnapmode.cpp
-
-moc/moc_rs_actionsetsnaprestriction.cpp: $(MOC) rs_actionsetsnaprestriction.h
- $(MOC) rs_actionsetsnaprestriction.h -o moc/moc_rs_actionsetsnaprestriction.cpp
-
-moc/moc_rs_actionsnapintersectionmanual.cpp: $(MOC) rs_actionsnapintersectionmanual.h
- $(MOC) rs_actionsnapintersectionmanual.h -o moc/moc_rs_actionsnapintersectionmanual.cpp
-
-moc/moc_rs_actiontoolregeneratedimensions.cpp: $(MOC) rs_actiontoolregeneratedimensions.h
- $(MOC) rs_actiontoolregeneratedimensions.h -o moc/moc_rs_actiontoolregeneratedimensions.cpp
-
-moc/moc_rs_actionzoomauto.cpp: $(MOC) rs_actionzoomauto.h
- $(MOC) rs_actionzoomauto.h -o moc/moc_rs_actionzoomauto.cpp
-
-moc/moc_rs_actionzoomautoy.cpp: $(MOC) rs_actionzoomautoy.h
- $(MOC) rs_actionzoomautoy.h -o moc/moc_rs_actionzoomautoy.cpp
-
-moc/moc_rs_actionzoomin.cpp: $(MOC) rs_actionzoomin.h
- $(MOC) rs_actionzoomin.h -o moc/moc_rs_actionzoomin.cpp
-
-moc/moc_rs_actionzoompan.cpp: $(MOC) rs_actionzoompan.h
- $(MOC) rs_actionzoompan.h -o moc/moc_rs_actionzoompan.cpp
-
-moc/moc_rs_actionzoomprevious.cpp: $(MOC) rs_actionzoomprevious.h
- $(MOC) rs_actionzoomprevious.h -o moc/moc_rs_actionzoomprevious.cpp
-
-moc/moc_rs_actionzoomredraw.cpp: $(MOC) rs_actionzoomredraw.h
- $(MOC) rs_actionzoomredraw.h -o moc/moc_rs_actionzoomredraw.cpp
-
-moc/moc_rs_actionzoomscroll.cpp: $(MOC) rs_actionzoomscroll.h
- $(MOC) rs_actionzoomscroll.h -o moc/moc_rs_actionzoomscroll.cpp
-
-moc/moc_rs_actionzoomwindow.cpp: $(MOC) rs_actionzoomwindow.h
- $(MOC) rs_actionzoomwindow.h -o moc/moc_rs_actionzoomwindow.cpp
-
-obj/qmake_image_collection.o: qmake_image_collection.cpp
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qmake_image_collection.o qmake_image_collection.cpp
-
-qmake_image_collection.cpp: images/configure.png \
- images/editcopy2.png \
- images/editcut2.png \
- images/editpaste2.png \
- images/exit.png \
- images/fileclose.png \
- images/filenew.png \
- images/fileopen2.png \
- images/fileprint.png \
- images/fileprintpreview.png \
- images/filesave2.png \
- images/filesaveas.png \
- images/redo2.png \
- images/undo2.png \
- images/viewgrid.png \
- images/viewdraft.png \
- images/zoomauto.png \
- images/zoomin.png \
- images/zoomout.png \
- images/zoompan.png \
- images/zoomprevious.png \
- images/zoomredraw.png \
- images/zoomwindow.png
- $(UIC) -embed qcadactions images/configure.png images/editcopy2.png images/editcut2.png images/editpaste2.png images/exit.png images/fileclose.png images/filenew.png images/fileopen2.png images/fileprint.png images/fileprintpreview.png images/filesave2.png images/filesaveas.png images/redo2.png images/undo2.png images/viewgrid.png images/viewdraft.png images/zoomauto.png images/zoomin.png images/zoomout.png images/zoompan.png images/zoomprevious.png images/zoomredraw.png images/zoomwindow.png -o qmake_image_collection.cpp
-
-####### Install
-
-install:
-
-uninstall:
-
diff --git a/qcadcmd/src/Makefile b/qcadcmd/src/Makefile
deleted file mode 100644
index 224fc3a..0000000
--- a/qcadcmd/src/Makefile
+++ /dev/null
@@ -1,145 +0,0 @@
-#############################################################################
-# Makefile for building: libqcadcmd.a
-# Generated by qmake (1.07a) (Qt 3.3.8b) on: Wed Mar 18 19:30:12 2009
-# Project: qcadcmd.pro
-# Template: lib
-# Command: $(QMAKE) -o Makefile qcadcmd.pro
-#############################################################################
-
-####### Compiler, tools and options
-
-CC = gcc
-CXX = g++
-LEX = flex
-YACC = yacc
-CFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-CXXFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wno-long-long -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-LEXFLAGS =
-YACCFLAGS= -d
-INCPATH = -I/usr/lib64/qt3/mkspecs/default -I. -I../include -I../../qcadlib/include -I../../fparser/include -I/usr/include -I$(QTDIR)/include -Imoc/
-AR = ar cqs
-RANLIB =
-MOC = $(QTDIR)/bin/moc
-UIC = $(QTDIR)/bin/uic
-QMAKE = qmake
-TAR = tar -cf
-GZIP = gzip -9f
-COPY = cp -f
-COPY_FILE= $(COPY)
-COPY_DIR = $(COPY) -r
-INSTALL_FILE= $(COPY_FILE)
-INSTALL_DIR = $(COPY_DIR)
-DEL_FILE = rm -f
-SYMLINK = ln -sf
-DEL_DIR = rmdir
-MOVE = mv -f
-CHK_DIR_EXISTS= test -d
-MKDIR = mkdir -p
-
-####### Output directory
-
-OBJECTS_DIR = obj/
-
-####### Files
-
-HEADERS = rs_commands.h
-SOURCES = rs_commands.cpp
-OBJECTS = obj/rs_commands.o
-FORMS =
-UICDECLS =
-UICIMPLS =
-SRCMOC = moc/moc_rs_commands.cpp
-OBJMOC = obj/moc_rs_commands.o
-DIST = ../../mkspecs/defs.pro \
- qcadcmd.pro
-QMAKE_TARGET = qcadcmd
-DESTDIR = ../lib/
-TARGET = libqcadcmd.a
-
-first: all
-####### Implicit rules
-
-.SUFFIXES: .c .o .cpp .cc .cxx .C
-
-.cpp.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cc.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cxx.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.C.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.c.o:
- $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $<
-
-####### Build rules
-
-all: Makefile ../lib/$(TARGET)
-
-staticlib: ../lib/$(TARGET)
-
-../lib/$(TARGET): $(UICDECLS) $(OBJECTS) $(OBJMOC) $(OBJCOMP)
- test -d ../lib/ || mkdir -p ../lib/
- -$(DEL_FILE) $(TARGET)
- $(AR) $(TARGET) $(OBJECTS) $(OBJMOC)
- -$(DEL_FILE) ../lib/$(TARGET)
- -$(MOVE) $(TARGET) ../lib/
-
-
-mocables: $(SRCMOC)
-uicables: $(UICDECLS) $(UICIMPLS)
-
-$(MOC):
- ( cd $(QTDIR)/src/moc && $(MAKE) )
-
-Makefile: qcadcmd.pro /usr/lib64/qt3/mkspecs/default/qmake.conf ../../mkspecs/defs.pro \
- /usr/lib64/qt3/lib64/libqt-mt.prl
- $(QMAKE) -o Makefile qcadcmd.pro
-qmake:
- @$(QMAKE) -o Makefile qcadcmd.pro
-
-dist:
- @mkdir -p obj/qcadcmd && $(COPY_FILE) --parents $(SOURCES) $(HEADERS) $(FORMS) $(DIST) obj/qcadcmd/ && $(COPY_FILE) --parents ts/qcadcmd_cs.ts ts/qcadcmd_et.ts ts/qcadcmd_en.ts ts/qcadcmd_da.ts ts/qcadcmd_de.ts ts/qcadcmd_el.ts ts/qcadcmd_es.ts ts/qcadcmd_fr.ts ts/qcadcmd_hu.ts ts/qcadcmd_it.ts ts/qcadcmd_nl.ts ts/qcadcmd_no.ts ts/qcadcmd_pa.ts ts/qcadcmd_pl.ts ts/qcadcmd_ru.ts ts/qcadcmd_sk.ts ts/qcadcmd_tr.ts obj/qcadcmd/ && ( cd `dirname obj/qcadcmd` && $(TAR) qcadcmd.tar qcadcmd && $(GZIP) qcadcmd.tar ) && $(MOVE) `dirname obj/qcadcmd`/qcadcmd.tar.gz . && $(DEL_FILE) -r obj/qcadcmd
-
-mocclean:
- -$(DEL_FILE) $(OBJMOC)
- -$(DEL_FILE) $(SRCMOC)
-
-uiclean:
-
-yaccclean:
-lexclean:
-clean: mocclean
- -$(DEL_FILE) $(OBJECTS)
- -$(DEL_FILE) *~ core *.core
-
-
-####### Sub-libraries
-
-distclean: clean
- -$(DEL_FILE) ../lib/$(TARGET) $(TARGET)
-
-
-FORCE:
-
-####### Compile
-
-obj/rs_commands.o: rs_commands.cpp rs_commands.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_commands.o rs_commands.cpp
-
-obj/moc_rs_commands.o: moc/moc_rs_commands.cpp rs_commands.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_commands.o moc/moc_rs_commands.cpp
-
-moc/moc_rs_commands.cpp: $(MOC) rs_commands.h
- $(MOC) rs_commands.h -o moc/moc_rs_commands.cpp
-
-####### Install
-
-install:
-
-uninstall:
-
diff --git a/qcadguiqt/src/Makefile b/qcadguiqt/src/Makefile
deleted file mode 100644
index 741a4d4..0000000
--- a/qcadguiqt/src/Makefile
+++ /dev/null
@@ -1,2268 +0,0 @@
-#############################################################################
-# Makefile for building: libqcadguiqt.a
-# Generated by qmake (1.07a) (Qt 3.3.8b) on: Wed Mar 18 19:30:17 2009
-# Project: qcadguiqt.pro
-# Template: lib
-# Command: $(QMAKE) -o Makefile qcadguiqt.pro
-#############################################################################
-
-####### Compiler, tools and options
-
-CC = gcc
-CXX = g++
-LEX = flex
-YACC = yacc
-CFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-CXXFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wno-long-long -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-LEXFLAGS =
-YACCFLAGS= -d
-INCPATH = -I/usr/lib64/qt3/mkspecs/default -I. -I../include -I../../qcadlib/include -I../../qcadactions/include -I../../dxflib/include -I../../fparser/include -I../../qcadcmd/include -I/usr/include -I$(QTDIR)/include -Imoc/
-AR = ar cqs
-RANLIB =
-MOC = $(QTDIR)/bin/moc
-UIC = $(QTDIR)/bin/uic
-QMAKE = qmake
-TAR = tar -cf
-GZIP = gzip -9f
-COPY = cp -f
-COPY_FILE= $(COPY)
-COPY_DIR = $(COPY) -r
-INSTALL_FILE= $(COPY_FILE)
-INSTALL_DIR = $(COPY_DIR)
-DEL_FILE = rm -f
-SYMLINK = ln -sf
-DEL_DIR = rmdir
-MOVE = mv -f
-CHK_DIR_EXISTS= test -d
-MKDIR = mkdir -p
-
-####### Output directory
-
-OBJECTS_DIR = obj/
-
-####### Files
-
-HEADERS = qg_actionfactory.h \
- qg_actionhandler.h \
- qg_blockwidget.h \
- qg_colorbox.h \
- qg_commandedit.h \
- qg_dialogfactory.h \
- qg_filedialog.h \
- qg_fontbox.h \
- qg_graphicview.h \
- qg_layerbox.h \
- qg_layerwidget.h \
- qg_linetypebox.h \
- qg_listviewitem.h \
- qg_mainwindowinterface.h \
- qg_patternbox.h \
- qg_pentoolbar.h \
- qg_qt2rs.h \
- qg_recentfiles.h \
- qg_scrollbar.h \
- qg_widthbox.h
-SOURCES = qg_actionfactory.cpp \
- qg_actionhandler.cpp \
- qg_blockwidget.cpp \
- qg_colorbox.cpp \
- qg_commandedit.cpp \
- qg_dialogfactory.cpp \
- qg_filedialog.cpp \
- qg_fontbox.cpp \
- qg_graphicview.cpp \
- qg_layerbox.cpp \
- qg_layerwidget.cpp \
- qg_linetypebox.cpp \
- qg_listviewitem.cpp \
- qg_patternbox.cpp \
- qg_pentoolbar.cpp \
- qg_recentfiles.cpp \
- qg_widthbox.cpp
-OBJECTS = obj/qg_actionfactory.o \
- obj/qg_actionhandler.o \
- obj/qg_blockwidget.o \
- obj/qg_colorbox.o \
- obj/qg_commandedit.o \
- obj/qg_dialogfactory.o \
- obj/qg_filedialog.o \
- obj/qg_fontbox.o \
- obj/qg_graphicview.o \
- obj/qg_layerbox.o \
- obj/qg_layerwidget.o \
- obj/qg_linetypebox.o \
- obj/qg_listviewitem.o \
- obj/qg_patternbox.o \
- obj/qg_pentoolbar.o \
- obj/qg_recentfiles.o \
- obj/qg_widthbox.o \
- obj/qg_commandwidget.o \
- obj/qg_arcoptions.o \
- obj/qg_arctangentialoptions.o \
- obj/qg_beveloptions.o \
- obj/qg_blockdialog.o \
- obj/qg_cadtoolbar.o \
- obj/qg_cadtoolbararcs.o \
- obj/qg_cadtoolbarcircles.o \
- obj/qg_cadtoolbardim.o \
- obj/qg_cadtoolbarellipses.o \
- obj/qg_cadtoolbarinfo.o \
- obj/qg_cadtoolbarlines.o \
- obj/qg_cadtoolbarmain.o \
- obj/qg_cadtoolbarmodify.o \
- obj/qg_cadtoolbarpoints.o \
- obj/qg_cadtoolbarpolylines.o \
- obj/qg_cadtoolbarselect.o \
- obj/qg_cadtoolbarsnap.o \
- obj/qg_cadtoolbarsplines.o \
- obj/qg_circleoptions.o \
- obj/qg_coordinatewidget.o \
- obj/qg_dimensionlabeleditor.o \
- obj/qg_dimlinearoptions.o \
- obj/qg_dimoptions.o \
- obj/qg_dlgattributes.o \
- obj/qg_dlghatch.o \
- obj/qg_dlginitial.o \
- obj/qg_dlginsert.o \
- obj/qg_dlgimageoptions.o \
- obj/qg_dlgarc.o \
- obj/qg_dlgcircle.o \
- obj/qg_dlgdimension.o \
- obj/qg_dlgdimlinear.o \
- obj/qg_dlgline.o \
- obj/qg_dlgellipse.o \
- obj/qg_dlgmirror.o \
- obj/qg_dlgmove.o \
- obj/qg_dlgmoverotate.o \
- obj/qg_dlgoptionsdrawing.o \
- obj/qg_dlgoptionsgeneral.o \
- obj/qg_dlgpoint.o \
- obj/qg_dlgrotate.o \
- obj/qg_dlgrotate2.o \
- obj/qg_dlgscale.o \
- obj/qg_dlgspline.o \
- obj/qg_dlgtext.o \
- obj/qg_exitdialog.o \
- obj/qg_imageoptions.o \
- obj/qg_insertoptions.o \
- obj/qg_layerdialog.o \
- obj/qg_libraryinsertoptions.o \
- obj/qg_librarywidget.o \
- obj/qg_lineangleoptions.o \
- obj/qg_linebisectoroptions.o \
- obj/qg_lineoptions.o \
- obj/qg_lineparalleloptions.o \
- obj/qg_lineparallelthroughoptions.o \
- obj/qg_linepolygon2options.o \
- obj/qg_linepolygonoptions.o \
- obj/qg_linerelangleoptions.o \
- obj/qg_mousewidget.o \
- obj/qg_moverotateoptions.o \
- obj/qg_printpreviewoptions.o \
- obj/qg_roundoptions.o \
- obj/qg_selectionwidget.o \
- obj/qg_snapdistoptions.o \
- obj/qg_splineoptions.o \
- obj/qg_textoptions.o \
- obj/qg_trimamountoptions.o \
- obj/qg_widgetpen.o \
- obj/qg_polylineoptions.o
-FORMS = ui/qg_commandwidget.ui \
- ui/qg_arcoptions.ui \
- ui/qg_arctangentialoptions.ui \
- ui/qg_beveloptions.ui \
- ui/qg_blockdialog.ui \
- ui/qg_cadtoolbar.ui \
- ui/qg_cadtoolbararcs.ui \
- ui/qg_cadtoolbarcircles.ui \
- ui/qg_cadtoolbardim.ui \
- ui/qg_cadtoolbarellipses.ui \
- ui/qg_cadtoolbarinfo.ui \
- ui/qg_cadtoolbarlines.ui \
- ui/qg_cadtoolbarmain.ui \
- ui/qg_cadtoolbarmodify.ui \
- ui/qg_cadtoolbarpoints.ui \
- ui/qg_cadtoolbarpolylines.ui \
- ui/qg_cadtoolbarselect.ui \
- ui/qg_cadtoolbarsnap.ui \
- ui/qg_cadtoolbarsplines.ui \
- ui/qg_circleoptions.ui \
- ui/qg_coordinatewidget.ui \
- ui/qg_dimensionlabeleditor.ui \
- ui/qg_dimlinearoptions.ui \
- ui/qg_dimoptions.ui \
- ui/qg_dlgattributes.ui \
- ui/qg_dlghatch.ui \
- ui/qg_dlginitial.ui \
- ui/qg_dlginsert.ui \
- ui/qg_dlgimageoptions.ui \
- ui/qg_dlgarc.ui \
- ui/qg_dlgcircle.ui \
- ui/qg_dlgdimension.ui \
- ui/qg_dlgdimlinear.ui \
- ui/qg_dlgline.ui \
- ui/qg_dlgellipse.ui \
- ui/qg_dlgmirror.ui \
- ui/qg_dlgmove.ui \
- ui/qg_dlgmoverotate.ui \
- ui/qg_dlgoptionsdrawing.ui \
- ui/qg_dlgoptionsgeneral.ui \
- ui/qg_dlgpoint.ui \
- ui/qg_dlgrotate.ui \
- ui/qg_dlgrotate2.ui \
- ui/qg_dlgscale.ui \
- ui/qg_dlgspline.ui \
- ui/qg_dlgtext.ui \
- ui/qg_exitdialog.ui \
- ui/qg_imageoptions.ui \
- ui/qg_insertoptions.ui \
- ui/qg_layerdialog.ui \
- ui/qg_libraryinsertoptions.ui \
- ui/qg_librarywidget.ui \
- ui/qg_lineangleoptions.ui \
- ui/qg_linebisectoroptions.ui \
- ui/qg_lineoptions.ui \
- ui/qg_lineparalleloptions.ui \
- ui/qg_lineparallelthroughoptions.ui \
- ui/qg_linepolygon2options.ui \
- ui/qg_linepolygonoptions.ui \
- ui/qg_linerelangleoptions.ui \
- ui/qg_mousewidget.ui \
- ui/qg_moverotateoptions.ui \
- ui/qg_printpreviewoptions.ui \
- ui/qg_roundoptions.ui \
- ui/qg_selectionwidget.ui \
- ui/qg_snapdistoptions.ui \
- ui/qg_splineoptions.ui \
- ui/qg_textoptions.ui \
- ui/qg_trimamountoptions.ui \
- ui/qg_widgetpen.ui \
- ui/qg_polylineoptions.ui
-UICDECLS = ui/qg_commandwidget.h \
- ui/qg_arcoptions.h \
- ui/qg_arctangentialoptions.h \
- ui/qg_beveloptions.h \
- ui/qg_blockdialog.h \
- ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbararcs.h \
- ui/qg_cadtoolbarcircles.h \
- ui/qg_cadtoolbardim.h \
- ui/qg_cadtoolbarellipses.h \
- ui/qg_cadtoolbarinfo.h \
- ui/qg_cadtoolbarlines.h \
- ui/qg_cadtoolbarmain.h \
- ui/qg_cadtoolbarmodify.h \
- ui/qg_cadtoolbarpoints.h \
- ui/qg_cadtoolbarpolylines.h \
- ui/qg_cadtoolbarselect.h \
- ui/qg_cadtoolbarsnap.h \
- ui/qg_cadtoolbarsplines.h \
- ui/qg_circleoptions.h \
- ui/qg_coordinatewidget.h \
- ui/qg_dimensionlabeleditor.h \
- ui/qg_dimlinearoptions.h \
- ui/qg_dimoptions.h \
- ui/qg_dlgattributes.h \
- ui/qg_dlghatch.h \
- ui/qg_dlginitial.h \
- ui/qg_dlginsert.h \
- ui/qg_dlgimageoptions.h \
- ui/qg_dlgarc.h \
- ui/qg_dlgcircle.h \
- ui/qg_dlgdimension.h \
- ui/qg_dlgdimlinear.h \
- ui/qg_dlgline.h \
- ui/qg_dlgellipse.h \
- ui/qg_dlgmirror.h \
- ui/qg_dlgmove.h \
- ui/qg_dlgmoverotate.h \
- ui/qg_dlgoptionsdrawing.h \
- ui/qg_dlgoptionsgeneral.h \
- ui/qg_dlgpoint.h \
- ui/qg_dlgrotate.h \
- ui/qg_dlgrotate2.h \
- ui/qg_dlgscale.h \
- ui/qg_dlgspline.h \
- ui/qg_dlgtext.h \
- ui/qg_exitdialog.h \
- ui/qg_imageoptions.h \
- ui/qg_insertoptions.h \
- ui/qg_layerdialog.h \
- ui/qg_libraryinsertoptions.h \
- ui/qg_librarywidget.h \
- ui/qg_lineangleoptions.h \
- ui/qg_linebisectoroptions.h \
- ui/qg_lineoptions.h \
- ui/qg_lineparalleloptions.h \
- ui/qg_lineparallelthroughoptions.h \
- ui/qg_linepolygon2options.h \
- ui/qg_linepolygonoptions.h \
- ui/qg_linerelangleoptions.h \
- ui/qg_mousewidget.h \
- ui/qg_moverotateoptions.h \
- ui/qg_printpreviewoptions.h \
- ui/qg_roundoptions.h \
- ui/qg_selectionwidget.h \
- ui/qg_snapdistoptions.h \
- ui/qg_splineoptions.h \
- ui/qg_textoptions.h \
- ui/qg_trimamountoptions.h \
- ui/qg_widgetpen.h \
- ui/qg_polylineoptions.h
-UICIMPLS = ui/qg_commandwidget.cpp \
- ui/qg_arcoptions.cpp \
- ui/qg_arctangentialoptions.cpp \
- ui/qg_beveloptions.cpp \
- ui/qg_blockdialog.cpp \
- ui/qg_cadtoolbar.cpp \
- ui/qg_cadtoolbararcs.cpp \
- ui/qg_cadtoolbarcircles.cpp \
- ui/qg_cadtoolbardim.cpp \
- ui/qg_cadtoolbarellipses.cpp \
- ui/qg_cadtoolbarinfo.cpp \
- ui/qg_cadtoolbarlines.cpp \
- ui/qg_cadtoolbarmain.cpp \
- ui/qg_cadtoolbarmodify.cpp \
- ui/qg_cadtoolbarpoints.cpp \
- ui/qg_cadtoolbarpolylines.cpp \
- ui/qg_cadtoolbarselect.cpp \
- ui/qg_cadtoolbarsnap.cpp \
- ui/qg_cadtoolbarsplines.cpp \
- ui/qg_circleoptions.cpp \
- ui/qg_coordinatewidget.cpp \
- ui/qg_dimensionlabeleditor.cpp \
- ui/qg_dimlinearoptions.cpp \
- ui/qg_dimoptions.cpp \
- ui/qg_dlgattributes.cpp \
- ui/qg_dlghatch.cpp \
- ui/qg_dlginitial.cpp \
- ui/qg_dlginsert.cpp \
- ui/qg_dlgimageoptions.cpp \
- ui/qg_dlgarc.cpp \
- ui/qg_dlgcircle.cpp \
- ui/qg_dlgdimension.cpp \
- ui/qg_dlgdimlinear.cpp \
- ui/qg_dlgline.cpp \
- ui/qg_dlgellipse.cpp \
- ui/qg_dlgmirror.cpp \
- ui/qg_dlgmove.cpp \
- ui/qg_dlgmoverotate.cpp \
- ui/qg_dlgoptionsdrawing.cpp \
- ui/qg_dlgoptionsgeneral.cpp \
- ui/qg_dlgpoint.cpp \
- ui/qg_dlgrotate.cpp \
- ui/qg_dlgrotate2.cpp \
- ui/qg_dlgscale.cpp \
- ui/qg_dlgspline.cpp \
- ui/qg_dlgtext.cpp \
- ui/qg_exitdialog.cpp \
- ui/qg_imageoptions.cpp \
- ui/qg_insertoptions.cpp \
- ui/qg_layerdialog.cpp \
- ui/qg_libraryinsertoptions.cpp \
- ui/qg_librarywidget.cpp \
- ui/qg_lineangleoptions.cpp \
- ui/qg_linebisectoroptions.cpp \
- ui/qg_lineoptions.cpp \
- ui/qg_lineparalleloptions.cpp \
- ui/qg_lineparallelthroughoptions.cpp \
- ui/qg_linepolygon2options.cpp \
- ui/qg_linepolygonoptions.cpp \
- ui/qg_linerelangleoptions.cpp \
- ui/qg_mousewidget.cpp \
- ui/qg_moverotateoptions.cpp \
- ui/qg_printpreviewoptions.cpp \
- ui/qg_roundoptions.cpp \
- ui/qg_selectionwidget.cpp \
- ui/qg_snapdistoptions.cpp \
- ui/qg_splineoptions.cpp \
- ui/qg_textoptions.cpp \
- ui/qg_trimamountoptions.cpp \
- ui/qg_widgetpen.cpp \
- ui/qg_polylineoptions.cpp
-SRCMOC = moc/moc_qg_actionfactory.cpp \
- moc/moc_qg_actionhandler.cpp \
- moc/moc_qg_blockwidget.cpp \
- moc/moc_qg_colorbox.cpp \
- moc/moc_qg_commandedit.cpp \
- moc/moc_qg_fontbox.cpp \
- moc/moc_qg_graphicview.cpp \
- moc/moc_qg_layerbox.cpp \
- moc/moc_qg_layerwidget.cpp \
- moc/moc_qg_linetypebox.cpp \
- moc/moc_qg_patternbox.cpp \
- moc/moc_qg_pentoolbar.cpp \
- moc/moc_qg_scrollbar.cpp \
- moc/moc_qg_widthbox.cpp \
- moc/moc_qg_commandwidget.cpp \
- moc/moc_qg_arcoptions.cpp \
- moc/moc_qg_arctangentialoptions.cpp \
- moc/moc_qg_beveloptions.cpp \
- moc/moc_qg_blockdialog.cpp \
- moc/moc_qg_cadtoolbar.cpp \
- moc/moc_qg_cadtoolbararcs.cpp \
- moc/moc_qg_cadtoolbarcircles.cpp \
- moc/moc_qg_cadtoolbardim.cpp \
- moc/moc_qg_cadtoolbarellipses.cpp \
- moc/moc_qg_cadtoolbarinfo.cpp \
- moc/moc_qg_cadtoolbarlines.cpp \
- moc/moc_qg_cadtoolbarmain.cpp \
- moc/moc_qg_cadtoolbarmodify.cpp \
- moc/moc_qg_cadtoolbarpoints.cpp \
- moc/moc_qg_cadtoolbarpolylines.cpp \
- moc/moc_qg_cadtoolbarselect.cpp \
- moc/moc_qg_cadtoolbarsnap.cpp \
- moc/moc_qg_cadtoolbarsplines.cpp \
- moc/moc_qg_circleoptions.cpp \
- moc/moc_qg_coordinatewidget.cpp \
- moc/moc_qg_dimensionlabeleditor.cpp \
- moc/moc_qg_dimlinearoptions.cpp \
- moc/moc_qg_dimoptions.cpp \
- moc/moc_qg_dlgattributes.cpp \
- moc/moc_qg_dlghatch.cpp \
- moc/moc_qg_dlginitial.cpp \
- moc/moc_qg_dlginsert.cpp \
- moc/moc_qg_dlgimageoptions.cpp \
- moc/moc_qg_dlgarc.cpp \
- moc/moc_qg_dlgcircle.cpp \
- moc/moc_qg_dlgdimension.cpp \
- moc/moc_qg_dlgdimlinear.cpp \
- moc/moc_qg_dlgline.cpp \
- moc/moc_qg_dlgellipse.cpp \
- moc/moc_qg_dlgmirror.cpp \
- moc/moc_qg_dlgmove.cpp \
- moc/moc_qg_dlgmoverotate.cpp \
- moc/moc_qg_dlgoptionsdrawing.cpp \
- moc/moc_qg_dlgoptionsgeneral.cpp \
- moc/moc_qg_dlgpoint.cpp \
- moc/moc_qg_dlgrotate.cpp \
- moc/moc_qg_dlgrotate2.cpp \
- moc/moc_qg_dlgscale.cpp \
- moc/moc_qg_dlgspline.cpp \
- moc/moc_qg_dlgtext.cpp \
- moc/moc_qg_exitdialog.cpp \
- moc/moc_qg_imageoptions.cpp \
- moc/moc_qg_insertoptions.cpp \
- moc/moc_qg_layerdialog.cpp \
- moc/moc_qg_libraryinsertoptions.cpp \
- moc/moc_qg_librarywidget.cpp \
- moc/moc_qg_lineangleoptions.cpp \
- moc/moc_qg_linebisectoroptions.cpp \
- moc/moc_qg_lineoptions.cpp \
- moc/moc_qg_lineparalleloptions.cpp \
- moc/moc_qg_lineparallelthroughoptions.cpp \
- moc/moc_qg_linepolygon2options.cpp \
- moc/moc_qg_linepolygonoptions.cpp \
- moc/moc_qg_linerelangleoptions.cpp \
- moc/moc_qg_mousewidget.cpp \
- moc/moc_qg_moverotateoptions.cpp \
- moc/moc_qg_printpreviewoptions.cpp \
- moc/moc_qg_roundoptions.cpp \
- moc/moc_qg_selectionwidget.cpp \
- moc/moc_qg_snapdistoptions.cpp \
- moc/moc_qg_splineoptions.cpp \
- moc/moc_qg_textoptions.cpp \
- moc/moc_qg_trimamountoptions.cpp \
- moc/moc_qg_widgetpen.cpp \
- moc/moc_qg_polylineoptions.cpp
-OBJMOC = obj/moc_qg_actionfactory.o \
- obj/moc_qg_actionhandler.o \
- obj/moc_qg_blockwidget.o \
- obj/moc_qg_colorbox.o \
- obj/moc_qg_commandedit.o \
- obj/moc_qg_fontbox.o \
- obj/moc_qg_graphicview.o \
- obj/moc_qg_layerbox.o \
- obj/moc_qg_layerwidget.o \
- obj/moc_qg_linetypebox.o \
- obj/moc_qg_patternbox.o \
- obj/moc_qg_pentoolbar.o \
- obj/moc_qg_scrollbar.o \
- obj/moc_qg_widthbox.o \
- obj/moc_qg_commandwidget.o \
- obj/moc_qg_arcoptions.o \
- obj/moc_qg_arctangentialoptions.o \
- obj/moc_qg_beveloptions.o \
- obj/moc_qg_blockdialog.o \
- obj/moc_qg_cadtoolbar.o \
- obj/moc_qg_cadtoolbararcs.o \
- obj/moc_qg_cadtoolbarcircles.o \
- obj/moc_qg_cadtoolbardim.o \
- obj/moc_qg_cadtoolbarellipses.o \
- obj/moc_qg_cadtoolbarinfo.o \
- obj/moc_qg_cadtoolbarlines.o \
- obj/moc_qg_cadtoolbarmain.o \
- obj/moc_qg_cadtoolbarmodify.o \
- obj/moc_qg_cadtoolbarpoints.o \
- obj/moc_qg_cadtoolbarpolylines.o \
- obj/moc_qg_cadtoolbarselect.o \
- obj/moc_qg_cadtoolbarsnap.o \
- obj/moc_qg_cadtoolbarsplines.o \
- obj/moc_qg_circleoptions.o \
- obj/moc_qg_coordinatewidget.o \
- obj/moc_qg_dimensionlabeleditor.o \
- obj/moc_qg_dimlinearoptions.o \
- obj/moc_qg_dimoptions.o \
- obj/moc_qg_dlgattributes.o \
- obj/moc_qg_dlghatch.o \
- obj/moc_qg_dlginitial.o \
- obj/moc_qg_dlginsert.o \
- obj/moc_qg_dlgimageoptions.o \
- obj/moc_qg_dlgarc.o \
- obj/moc_qg_dlgcircle.o \
- obj/moc_qg_dlgdimension.o \
- obj/moc_qg_dlgdimlinear.o \
- obj/moc_qg_dlgline.o \
- obj/moc_qg_dlgellipse.o \
- obj/moc_qg_dlgmirror.o \
- obj/moc_qg_dlgmove.o \
- obj/moc_qg_dlgmoverotate.o \
- obj/moc_qg_dlgoptionsdrawing.o \
- obj/moc_qg_dlgoptionsgeneral.o \
- obj/moc_qg_dlgpoint.o \
- obj/moc_qg_dlgrotate.o \
- obj/moc_qg_dlgrotate2.o \
- obj/moc_qg_dlgscale.o \
- obj/moc_qg_dlgspline.o \
- obj/moc_qg_dlgtext.o \
- obj/moc_qg_exitdialog.o \
- obj/moc_qg_imageoptions.o \
- obj/moc_qg_insertoptions.o \
- obj/moc_qg_layerdialog.o \
- obj/moc_qg_libraryinsertoptions.o \
- obj/moc_qg_librarywidget.o \
- obj/moc_qg_lineangleoptions.o \
- obj/moc_qg_linebisectoroptions.o \
- obj/moc_qg_lineoptions.o \
- obj/moc_qg_lineparalleloptions.o \
- obj/moc_qg_lineparallelthroughoptions.o \
- obj/moc_qg_linepolygon2options.o \
- obj/moc_qg_linepolygonoptions.o \
- obj/moc_qg_linerelangleoptions.o \
- obj/moc_qg_mousewidget.o \
- obj/moc_qg_moverotateoptions.o \
- obj/moc_qg_printpreviewoptions.o \
- obj/moc_qg_roundoptions.o \
- obj/moc_qg_selectionwidget.o \
- obj/moc_qg_snapdistoptions.o \
- obj/moc_qg_splineoptions.o \
- obj/moc_qg_textoptions.o \
- obj/moc_qg_trimamountoptions.o \
- obj/moc_qg_widgetpen.o \
- obj/moc_qg_polylineoptions.o
-DIST = ../../mkspecs/defs.pro \
- qcadguiqt.pro
-QMAKE_TARGET = qcadguiqt
-DESTDIR = ../lib/
-TARGET = libqcadguiqt.a
-
-first: all
-####### Implicit rules
-
-.SUFFIXES: .c .o .cpp .cc .cxx .C
-
-.cpp.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cc.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cxx.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.C.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.c.o:
- $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $<
-
-####### Build rules
-
-all: Makefile ../lib/$(TARGET)
-
-staticlib: ../lib/$(TARGET)
-
-../lib/$(TARGET): $(UICDECLS) $(OBJECTS) $(OBJMOC) $(OBJCOMP)
- test -d ../lib/ || mkdir -p ../lib/
- -$(DEL_FILE) $(TARGET)
- $(AR) $(TARGET) $(OBJECTS) $(OBJMOC)
- -$(DEL_FILE) ../lib/$(TARGET)
- -$(MOVE) $(TARGET) ../lib/
-
-
-mocables: $(SRCMOC)
-uicables: $(UICDECLS) $(UICIMPLS)
-
-$(MOC):
- ( cd $(QTDIR)/src/moc && $(MAKE) )
-
-Makefile: qcadguiqt.pro /usr/lib64/qt3/mkspecs/default/qmake.conf ../../mkspecs/defs.pro \
- /usr/lib64/qt3/lib64/libqt-mt.prl
- $(QMAKE) -o Makefile qcadguiqt.pro
-qmake:
- @$(QMAKE) -o Makefile qcadguiqt.pro
-
-dist:
- @mkdir -p obj/qcadguiqt && $(COPY_FILE) --parents $(SOURCES) $(HEADERS) $(FORMS) $(DIST) obj/qcadguiqt/ && $(COPY_FILE) --parents ts/qcadguiqt_cs.ts ts/qcadguiqt_et.ts ts/qcadguiqt_en.ts ts/qcadguiqt_da.ts ts/qcadguiqt_de.ts ts/qcadguiqt_el.ts ts/qcadguiqt_es.ts ts/qcadguiqt_fr.ts ts/qcadguiqt_hu.ts ts/qcadguiqt_it.ts ts/qcadguiqt_nl.ts ts/qcadguiqt_no.ts ts/qcadguiqt_pa.ts ts/qcadguiqt_pl.ts ts/qcadguiqt_ru.ts ts/qcadguiqt_sk.ts ts/qcadguiqt_tr.ts obj/qcadguiqt/ && $(COPY_FILE) --parents ui/qg_commandwidget.ui.h ui/qg_arcoptions.ui.h ui/qg_arctangentialoptions.ui.h ui/qg_beveloptions.ui.h ui/qg_blockdialog.ui.h ui/qg_cadtoolbar.ui.h ui/qg_cadtoolbararcs.ui.h ui/qg_cadtoolbarcircles.ui.h ui/qg_cadtoolbardim.ui.h ui/qg_cadtoolbarellipses.ui.h ui/qg_cadtoolbarinfo.ui.h ui/qg_cadtoolbarlines.ui.h ui/qg_cadtoolbarmain.ui.h ui/qg_cadtoolbarmodify.ui.h ui/qg_cadtoolbarpoints.ui.h ui/qg_cadtoolbarpolylines.ui.h ui/qg_cadtoolbarselect.ui.h ui/qg_cadtoolbarsnap.ui.h ui/qg_cadtoolbarsplines.ui.h ui/qg_circleoptions.ui.h ui/qg_coordinatewidget.ui.h ui/qg_dimensionlabeleditor.ui.h ui/qg_dimlinearoptions.ui.h ui/qg_dimoptions.ui.h ui/qg_dlgattributes.ui.h ui/qg_dlghatch.ui.h ui/qg_dlginitial.ui.h ui/qg_dlginsert.ui.h ui/qg_dlgimageoptions.ui.h ui/qg_dlgarc.ui.h ui/qg_dlgcircle.ui.h ui/qg_dlgdimension.ui.h ui/qg_dlgdimlinear.ui.h ui/qg_dlgline.ui.h ui/qg_dlgellipse.ui.h ui/qg_dlgmirror.ui.h ui/qg_dlgmove.ui.h ui/qg_dlgmoverotate.ui.h ui/qg_dlgoptionsdrawing.ui.h ui/qg_dlgoptionsgeneral.ui.h ui/qg_dlgpoint.ui.h ui/qg_dlgrotate.ui.h ui/qg_dlgrotate2.ui.h ui/qg_dlgscale.ui.h ui/qg_dlgspline.ui.h ui/qg_dlgtext.ui.h ui/qg_exitdialog.ui.h ui/qg_imageoptions.ui.h ui/qg_insertoptions.ui.h ui/qg_layerdialog.ui.h ui/qg_libraryinsertoptions.ui.h ui/qg_librarywidget.ui.h ui/qg_lineangleoptions.ui.h ui/qg_linebisectoroptions.ui.h ui/qg_lineoptions.ui.h ui/qg_lineparalleloptions.ui.h ui/qg_lineparallelthroughoptions.ui.h ui/qg_linepolygon2options.ui.h ui/qg_linepolygonoptions.ui.h ui/qg_linerelangleoptions.ui.h ui/qg_mousewidget.ui.h ui/qg_moverotateoptions.ui.h ui/qg_printpreviewoptions.ui.h ui/qg_roundoptions.ui.h ui/qg_selectionwidget.ui.h ui/qg_snapdistoptions.ui.h ui/qg_splineoptions.ui.h ui/qg_textoptions.ui.h ui/qg_trimamountoptions.ui.h ui/qg_widgetpen.ui.h ui/qg_polylineoptions.ui.h obj/qcadguiqt/ && ( cd `dirname obj/qcadguiqt` && $(TAR) qcadguiqt.tar qcadguiqt && $(GZIP) qcadguiqt.tar ) && $(MOVE) `dirname obj/qcadguiqt`/qcadguiqt.tar.gz . && $(DEL_FILE) -r obj/qcadguiqt
-
-mocclean:
- -$(DEL_FILE) $(OBJMOC)
- -$(DEL_FILE) $(SRCMOC)
-
-uiclean:
- -$(DEL_FILE) $(UICIMPLS) $(UICDECLS)
-
-yaccclean:
-lexclean:
-clean: mocclean uiclean
- -$(DEL_FILE) $(OBJECTS)
- -$(DEL_FILE) *~ core *.core
-
-
-####### Sub-libraries
-
-distclean: clean
- -$(DEL_FILE) ../lib/$(TARGET) $(TARGET)
-
-
-FORCE:
-
-####### Compile
-
-obj/qg_actionfactory.o: qg_actionfactory.cpp qg_actionfactory.h \
- qg_actionhandler.h \
- qg_mainwindowinterface.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_actionfactory.o qg_actionfactory.cpp
-
-obj/qg_actionhandler.o: qg_actionhandler.cpp qg_actionhandler.h \
- qg_mainwindowinterface.h \
- ui/qg_cadtoolbarsnap.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_actionhandler.o qg_actionhandler.cpp
-
-obj/qg_blockwidget.o: qg_blockwidget.cpp qg_blockwidget.h \
- xpm/visibleblock.xpm \
- xpm/hiddenblock.xpm \
- xpm/blockadd.xpm \
- xpm/blockremove.xpm \
- xpm/blockedit.xpm \
- xpm/blockattributes.xpm \
- xpm/blockinsert.xpm \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_blockwidget.o qg_blockwidget.cpp
-
-obj/qg_colorbox.o: qg_colorbox.cpp qg_colorbox.h \
- xpm/color00.xpm \
- xpm/color01.xpm \
- xpm/color02.xpm \
- xpm/color03.xpm \
- xpm/color04.xpm \
- xpm/color05.xpm \
- xpm/color06.xpm \
- xpm/color07.xpm \
- xpm/color08.xpm \
- xpm/color09.xpm \
- xpm/color11.xpm \
- xpm/color14.xpm \
- xpm/colorxx.xpm
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_colorbox.o qg_colorbox.cpp
-
-obj/qg_commandedit.o: qg_commandedit.cpp qg_commandedit.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_commandedit.o qg_commandedit.cpp
-
-obj/qg_dialogfactory.o: qg_dialogfactory.cpp qg_dialogfactory.h \
- ui/qg_arcoptions.h \
- ui/qg_arctangentialoptions.h \
- ui/qg_beveloptions.h \
- ui/qg_blockdialog.h \
- ui/qg_cadtoolbar.h \
- ui/qg_circleoptions.h \
- ui/qg_commandwidget.h \
- ui/qg_coordinatewidget.h \
- ui/qg_dimlinearoptions.h \
- ui/qg_dimoptions.h \
- ui/qg_dlgarc.h \
- ui/qg_dlgattributes.h \
- ui/qg_dlgcircle.h \
- ui/qg_dlgdimension.h \
- ui/qg_dlgdimlinear.h \
- ui/qg_dlgellipse.h \
- ui/qg_dlghatch.h \
- ui/qg_dlginsert.h \
- ui/qg_dlgline.h \
- ui/qg_dlgmirror.h \
- ui/qg_dlgmove.h \
- ui/qg_dlgmoverotate.h \
- ui/qg_dlgoptionsdrawing.h \
- ui/qg_dlgoptionsgeneral.h \
- ui/qg_dlgpoint.h \
- ui/qg_dlgrotate.h \
- ui/qg_dlgrotate2.h \
- ui/qg_dlgscale.h \
- ui/qg_dlgspline.h \
- ui/qg_dlgtext.h \
- ui/qg_imageoptions.h \
- ui/qg_insertoptions.h \
- ui/qg_layerdialog.h \
- ui/qg_libraryinsertoptions.h \
- ui/qg_lineangleoptions.h \
- ui/qg_linebisectoroptions.h \
- ui/qg_lineoptions.h \
- ui/qg_lineparalleloptions.h \
- ui/qg_lineparallelthroughoptions.h \
- ui/qg_linepolygon2options.h \
- ui/qg_linepolygonoptions.h \
- ui/qg_linerelangleoptions.h \
- ui/qg_mousewidget.h \
- ui/qg_moverotateoptions.h \
- ui/qg_printpreviewoptions.h \
- ui/qg_roundoptions.h \
- ui/qg_selectionwidget.h \
- ui/qg_snapdistoptions.h \
- ui/qg_splineoptions.h \
- ui/qg_textoptions.h \
- ui/qg_trimamountoptions.h \
- ui/qg_polylineoptions.h \
- qg_layerwidget.h \
- qg_mainwindowinterface.h \
- ui/qg_cadtoolbararcs.h \
- ui/qg_cadtoolbarcircles.h \
- ui/qg_cadtoolbarmodify.h \
- ui/qg_cadtoolbarellipses.h \
- ui/qg_cadtoolbarlines.h \
- ui/qg_cadtoolbarpoints.h \
- ui/qg_cadtoolbardim.h \
- ui/qg_cadtoolbarsnap.h \
- ui/qg_cadtoolbarselect.h \
- ui/qg_cadtoolbarmain.h \
- ui/qg_cadtoolbarinfo.h \
- ui/qg_cadtoolbarsplines.h \
- ui/qg_cadtoolbarpolylines.h \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h \
- ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dialogfactory.o qg_dialogfactory.cpp
-
-obj/qg_filedialog.o: qg_filedialog.cpp qg_filedialog.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_filedialog.o qg_filedialog.cpp
-
-obj/qg_fontbox.o: qg_fontbox.cpp qg_fontbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_fontbox.o qg_fontbox.cpp
-
-obj/qg_graphicview.o: qg_graphicview.cpp qg_graphicview.h \
- ui/qg_cadtoolbar.h \
- qg_dialogfactory.h \
- qg_qt2rs.h \
- xpm/cur_glass_bmp.xpm \
- xpm/cur_glass_mask.xpm \
- xpm/cur_cad_bmp.xpm \
- xpm/cur_cad_mask.xpm \
- xpm/cur_del_bmp.xpm \
- xpm/cur_del_mask.xpm \
- xpm/cur_select_bmp.xpm \
- xpm/cur_select_mask.xpm \
- xpm/cur_hand_bmp.xpm \
- xpm/cur_hand_mask.xpm \
- qg_scrollbar.h \
- ui/qg_cadtoolbararcs.h \
- ui/qg_cadtoolbarcircles.h \
- ui/qg_cadtoolbarmodify.h \
- ui/qg_cadtoolbarellipses.h \
- ui/qg_cadtoolbarlines.h \
- ui/qg_cadtoolbarpoints.h \
- ui/qg_cadtoolbardim.h \
- ui/qg_cadtoolbarsnap.h \
- ui/qg_cadtoolbarselect.h \
- ui/qg_cadtoolbarmain.h \
- ui/qg_cadtoolbarinfo.h \
- ui/qg_cadtoolbarsplines.h \
- ui/qg_cadtoolbarpolylines.h \
- qg_actionhandler.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_graphicview.o qg_graphicview.cpp
-
-obj/qg_layerbox.o: qg_layerbox.cpp qg_layerbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_layerbox.o qg_layerbox.cpp
-
-obj/qg_layerwidget.o: qg_layerwidget.cpp qg_layerwidget.h \
- xpm/layerstatus_00.xpm \
- xpm/layerstatus_01.xpm \
- xpm/layerstatus_10.xpm \
- xpm/layerstatus_11.xpm \
- xpm/visibleblock.xpm \
- xpm/hiddenblock.xpm \
- xpm/layeradd.xpm \
- xpm/layerremove.xpm \
- xpm/layeredit.xpm \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_layerwidget.o qg_layerwidget.cpp
-
-obj/qg_linetypebox.o: qg_linetypebox.cpp qg_linetypebox.h \
- xpm/linetype00.xpm \
- xpm/linetype01.xpm \
- xpm/linetype02.xpm \
- xpm/linetype03.xpm \
- xpm/linetype04.xpm \
- xpm/linetype05.xpm \
- xpm/linetype06.xpm \
- xpm/linetype07.xpm
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_linetypebox.o qg_linetypebox.cpp
-
-obj/qg_listviewitem.o: qg_listviewitem.cpp qg_listviewitem.h \
- xpm/folderclosed.xpm \
- xpm/folderopen.xpm
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_listviewitem.o qg_listviewitem.cpp
-
-obj/qg_patternbox.o: qg_patternbox.cpp qg_patternbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_patternbox.o qg_patternbox.cpp
-
-obj/qg_pentoolbar.o: qg_pentoolbar.cpp qg_pentoolbar.h \
- qg_colorbox.h \
- qg_widthbox.h \
- qg_linetypebox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_pentoolbar.o qg_pentoolbar.cpp
-
-obj/qg_recentfiles.o: qg_recentfiles.cpp qg_recentfiles.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_recentfiles.o qg_recentfiles.cpp
-
-obj/qg_widthbox.o: qg_widthbox.cpp qg_widthbox.h \
- xpm/width00.xpm \
- xpm/width01.xpm \
- xpm/width02.xpm \
- xpm/width03.xpm \
- xpm/width04.xpm \
- xpm/width05.xpm \
- xpm/width06.xpm \
- xpm/width07.xpm \
- xpm/width08.xpm \
- xpm/width09.xpm \
- xpm/width10.xpm \
- xpm/width11.xpm \
- xpm/width12.xpm
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_widthbox.o qg_widthbox.cpp
-
-ui/qg_commandwidget.h: ui/qg_commandwidget.ui qg_commandedit.h \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_commandwidget.ui -o ui/qg_commandwidget.h
-
-ui/qg_commandwidget.cpp: ui/qg_commandwidget.h ui/qg_commandwidget.ui ui/qg_commandwidget.ui.h qg_commandedit.h \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_commandwidget.ui -i qg_commandwidget.h -o ui/qg_commandwidget.cpp
-
-ui/qg_arcoptions.h: ui/qg_arcoptions.ui
- $(UIC) ui/qg_arcoptions.ui -o ui/qg_arcoptions.h
-
-ui/qg_arcoptions.cpp: ui/qg_arcoptions.h ui/qg_arcoptions.ui ui/qg_arcoptions.ui.h
- $(UIC) ui/qg_arcoptions.ui -i qg_arcoptions.h -o ui/qg_arcoptions.cpp
-
-ui/qg_arctangentialoptions.h: ui/qg_arctangentialoptions.ui
- $(UIC) ui/qg_arctangentialoptions.ui -o ui/qg_arctangentialoptions.h
-
-ui/qg_arctangentialoptions.cpp: ui/qg_arctangentialoptions.h ui/qg_arctangentialoptions.ui ui/qg_arctangentialoptions.ui.h
- $(UIC) ui/qg_arctangentialoptions.ui -i qg_arctangentialoptions.h -o ui/qg_arctangentialoptions.cpp
-
-ui/qg_beveloptions.h: ui/qg_beveloptions.ui
- $(UIC) ui/qg_beveloptions.ui -o ui/qg_beveloptions.h
-
-ui/qg_beveloptions.cpp: ui/qg_beveloptions.h ui/qg_beveloptions.ui ui/qg_beveloptions.ui.h
- $(UIC) ui/qg_beveloptions.ui -i qg_beveloptions.h -o ui/qg_beveloptions.cpp
-
-ui/qg_blockdialog.h: ui/qg_blockdialog.ui
- $(UIC) ui/qg_blockdialog.ui -o ui/qg_blockdialog.h
-
-ui/qg_blockdialog.cpp: ui/qg_blockdialog.h ui/qg_blockdialog.ui ui/qg_blockdialog.ui.h
- $(UIC) ui/qg_blockdialog.ui -i qg_blockdialog.h -o ui/qg_blockdialog.cpp
-
-ui/qg_cadtoolbar.h: ui/qg_cadtoolbar.ui ui/qg_cadtoolbararcs.h \
- ui/qg_cadtoolbarcircles.h \
- ui/qg_cadtoolbarmodify.h \
- ui/qg_cadtoolbarellipses.h \
- ui/qg_cadtoolbarlines.h \
- ui/qg_cadtoolbarpoints.h \
- ui/qg_cadtoolbardim.h \
- ui/qg_cadtoolbarsnap.h \
- ui/qg_cadtoolbarselect.h \
- ui/qg_cadtoolbarmain.h \
- ui/qg_cadtoolbarinfo.h \
- ui/qg_cadtoolbarsplines.h \
- ui/qg_cadtoolbarpolylines.h \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbar.ui -o ui/qg_cadtoolbar.h
-
-ui/qg_cadtoolbar.cpp: ui/qg_cadtoolbar.h ui/qg_cadtoolbar.ui ui/qg_cadtoolbar.ui.h ui/qg_cadtoolbararcs.h \
- ui/qg_cadtoolbarcircles.h \
- ui/qg_cadtoolbarmodify.h \
- ui/qg_cadtoolbarellipses.h \
- ui/qg_cadtoolbarlines.h \
- ui/qg_cadtoolbarpoints.h \
- ui/qg_cadtoolbardim.h \
- ui/qg_cadtoolbarsnap.h \
- ui/qg_cadtoolbarselect.h \
- ui/qg_cadtoolbarmain.h \
- ui/qg_cadtoolbarinfo.h \
- ui/qg_cadtoolbarsplines.h \
- ui/qg_cadtoolbarpolylines.h \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbar.ui -i qg_cadtoolbar.h -o ui/qg_cadtoolbar.cpp
-
-ui/qg_cadtoolbararcs.h: ui/qg_cadtoolbararcs.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbararcs.ui -o ui/qg_cadtoolbararcs.h
-
-ui/qg_cadtoolbararcs.cpp: ui/qg_cadtoolbararcs.h ui/qg_cadtoolbararcs.ui ui/qg_cadtoolbararcs.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbararcs.ui -i qg_cadtoolbararcs.h -o ui/qg_cadtoolbararcs.cpp
-
-ui/qg_cadtoolbarcircles.h: ui/qg_cadtoolbarcircles.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarcircles.ui -o ui/qg_cadtoolbarcircles.h
-
-ui/qg_cadtoolbarcircles.cpp: ui/qg_cadtoolbarcircles.h ui/qg_cadtoolbarcircles.ui ui/qg_cadtoolbarcircles.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarcircles.ui -i qg_cadtoolbarcircles.h -o ui/qg_cadtoolbarcircles.cpp
-
-ui/qg_cadtoolbardim.h: ui/qg_cadtoolbardim.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbardim.ui -o ui/qg_cadtoolbardim.h
-
-ui/qg_cadtoolbardim.cpp: ui/qg_cadtoolbardim.h ui/qg_cadtoolbardim.ui ui/qg_cadtoolbardim.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbardim.ui -i qg_cadtoolbardim.h -o ui/qg_cadtoolbardim.cpp
-
-ui/qg_cadtoolbarellipses.h: ui/qg_cadtoolbarellipses.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarellipses.ui -o ui/qg_cadtoolbarellipses.h
-
-ui/qg_cadtoolbarellipses.cpp: ui/qg_cadtoolbarellipses.h ui/qg_cadtoolbarellipses.ui ui/qg_cadtoolbarellipses.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarellipses.ui -i qg_cadtoolbarellipses.h -o ui/qg_cadtoolbarellipses.cpp
-
-ui/qg_cadtoolbarinfo.h: ui/qg_cadtoolbarinfo.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarinfo.ui -o ui/qg_cadtoolbarinfo.h
-
-ui/qg_cadtoolbarinfo.cpp: ui/qg_cadtoolbarinfo.h ui/qg_cadtoolbarinfo.ui ui/qg_cadtoolbarinfo.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarinfo.ui -i qg_cadtoolbarinfo.h -o ui/qg_cadtoolbarinfo.cpp
-
-ui/qg_cadtoolbarlines.h: ui/qg_cadtoolbarlines.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarlines.ui -o ui/qg_cadtoolbarlines.h
-
-ui/qg_cadtoolbarlines.cpp: ui/qg_cadtoolbarlines.h ui/qg_cadtoolbarlines.ui ui/qg_cadtoolbarlines.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarlines.ui -i qg_cadtoolbarlines.h -o ui/qg_cadtoolbarlines.cpp
-
-ui/qg_cadtoolbarmain.h: ui/qg_cadtoolbarmain.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarmain.ui -o ui/qg_cadtoolbarmain.h
-
-ui/qg_cadtoolbarmain.cpp: ui/qg_cadtoolbarmain.h ui/qg_cadtoolbarmain.ui ui/qg_cadtoolbarmain.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarmain.ui -i qg_cadtoolbarmain.h -o ui/qg_cadtoolbarmain.cpp
-
-ui/qg_cadtoolbarmodify.h: ui/qg_cadtoolbarmodify.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarmodify.ui -o ui/qg_cadtoolbarmodify.h
-
-ui/qg_cadtoolbarmodify.cpp: ui/qg_cadtoolbarmodify.h ui/qg_cadtoolbarmodify.ui ui/qg_cadtoolbarmodify.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarmodify.ui -i qg_cadtoolbarmodify.h -o ui/qg_cadtoolbarmodify.cpp
-
-ui/qg_cadtoolbarpoints.h: ui/qg_cadtoolbarpoints.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarpoints.ui -o ui/qg_cadtoolbarpoints.h
-
-ui/qg_cadtoolbarpoints.cpp: ui/qg_cadtoolbarpoints.h ui/qg_cadtoolbarpoints.ui ui/qg_cadtoolbarpoints.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarpoints.ui -i qg_cadtoolbarpoints.h -o ui/qg_cadtoolbarpoints.cpp
-
-ui/qg_cadtoolbarpolylines.h: ui/qg_cadtoolbarpolylines.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarpolylines.ui -o ui/qg_cadtoolbarpolylines.h
-
-ui/qg_cadtoolbarpolylines.cpp: ui/qg_cadtoolbarpolylines.h ui/qg_cadtoolbarpolylines.ui ui/qg_cadtoolbarpolylines.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarpolylines.ui -i qg_cadtoolbarpolylines.h -o ui/qg_cadtoolbarpolylines.cpp
-
-ui/qg_cadtoolbarselect.h: ui/qg_cadtoolbarselect.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarselect.ui -o ui/qg_cadtoolbarselect.h
-
-ui/qg_cadtoolbarselect.cpp: ui/qg_cadtoolbarselect.h ui/qg_cadtoolbarselect.ui ui/qg_cadtoolbarselect.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarselect.ui -i qg_cadtoolbarselect.h -o ui/qg_cadtoolbarselect.cpp
-
-ui/qg_cadtoolbarsnap.h: ui/qg_cadtoolbarsnap.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarsnap.ui -o ui/qg_cadtoolbarsnap.h
-
-ui/qg_cadtoolbarsnap.cpp: ui/qg_cadtoolbarsnap.h ui/qg_cadtoolbarsnap.ui ui/qg_cadtoolbarsnap.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarsnap.ui -i qg_cadtoolbarsnap.h -o ui/qg_cadtoolbarsnap.cpp
-
-ui/qg_cadtoolbarsplines.h: ui/qg_cadtoolbarsplines.ui qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarsplines.ui -o ui/qg_cadtoolbarsplines.h
-
-ui/qg_cadtoolbarsplines.cpp: ui/qg_cadtoolbarsplines.h ui/qg_cadtoolbarsplines.ui ui/qg_cadtoolbarsplines.ui.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_cadtoolbarsplines.ui -i qg_cadtoolbarsplines.h -o ui/qg_cadtoolbarsplines.cpp
-
-ui/qg_circleoptions.h: ui/qg_circleoptions.ui
- $(UIC) ui/qg_circleoptions.ui -o ui/qg_circleoptions.h
-
-ui/qg_circleoptions.cpp: ui/qg_circleoptions.h ui/qg_circleoptions.ui ui/qg_circleoptions.ui.h
- $(UIC) ui/qg_circleoptions.ui -i qg_circleoptions.h -o ui/qg_circleoptions.cpp
-
-ui/qg_coordinatewidget.h: ui/qg_coordinatewidget.ui
- $(UIC) ui/qg_coordinatewidget.ui -o ui/qg_coordinatewidget.h
-
-ui/qg_coordinatewidget.cpp: ui/qg_coordinatewidget.h ui/qg_coordinatewidget.ui ui/qg_coordinatewidget.ui.h
- $(UIC) ui/qg_coordinatewidget.ui -i qg_coordinatewidget.h -o ui/qg_coordinatewidget.cpp
-
-ui/qg_dimensionlabeleditor.h: ui/qg_dimensionlabeleditor.ui
- $(UIC) ui/qg_dimensionlabeleditor.ui -o ui/qg_dimensionlabeleditor.h
-
-ui/qg_dimensionlabeleditor.cpp: ui/qg_dimensionlabeleditor.h ui/qg_dimensionlabeleditor.ui ui/qg_dimensionlabeleditor.ui.h
- $(UIC) ui/qg_dimensionlabeleditor.ui -i qg_dimensionlabeleditor.h -o ui/qg_dimensionlabeleditor.cpp
-
-ui/qg_dimlinearoptions.h: ui/qg_dimlinearoptions.ui
- $(UIC) ui/qg_dimlinearoptions.ui -o ui/qg_dimlinearoptions.h
-
-ui/qg_dimlinearoptions.cpp: ui/qg_dimlinearoptions.h ui/qg_dimlinearoptions.ui ui/qg_dimlinearoptions.ui.h
- $(UIC) ui/qg_dimlinearoptions.ui -i qg_dimlinearoptions.h -o ui/qg_dimlinearoptions.cpp
-
-ui/qg_dimoptions.h: ui/qg_dimoptions.ui
- $(UIC) ui/qg_dimoptions.ui -o ui/qg_dimoptions.h
-
-ui/qg_dimoptions.cpp: ui/qg_dimoptions.h ui/qg_dimoptions.ui ui/qg_dimoptions.ui.h
- $(UIC) ui/qg_dimoptions.ui -i qg_dimoptions.h -o ui/qg_dimoptions.cpp
-
-ui/qg_dlgattributes.h: ui/qg_dlgattributes.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgattributes.ui -o ui/qg_dlgattributes.h
-
-ui/qg_dlgattributes.cpp: ui/qg_dlgattributes.h ui/qg_dlgattributes.ui ui/qg_dlgattributes.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgattributes.ui -i qg_dlgattributes.h -o ui/qg_dlgattributes.cpp
-
-ui/qg_dlghatch.h: ui/qg_dlghatch.ui qg_patternbox.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_dlghatch.ui -o ui/qg_dlghatch.h
-
-ui/qg_dlghatch.cpp: ui/qg_dlghatch.h ui/qg_dlghatch.ui ui/qg_dlghatch.ui.h qg_patternbox.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_dlghatch.ui -i qg_dlghatch.h -o ui/qg_dlghatch.cpp
-
-ui/qg_dlginitial.h: ui/qg_dlginitial.ui
- $(UIC) ui/qg_dlginitial.ui -o ui/qg_dlginitial.h
-
-ui/qg_dlginitial.cpp: ui/qg_dlginitial.h ui/qg_dlginitial.ui ui/qg_dlginitial.ui.h
- $(UIC) ui/qg_dlginitial.ui -i qg_dlginitial.h -o ui/qg_dlginitial.cpp
-
-ui/qg_dlginsert.h: ui/qg_dlginsert.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlginsert.ui -o ui/qg_dlginsert.h
-
-ui/qg_dlginsert.cpp: ui/qg_dlginsert.h ui/qg_dlginsert.ui ui/qg_dlginsert.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlginsert.ui -i qg_dlginsert.h -o ui/qg_dlginsert.cpp
-
-ui/qg_dlgimageoptions.h: ui/qg_dlgimageoptions.ui
- $(UIC) ui/qg_dlgimageoptions.ui -o ui/qg_dlgimageoptions.h
-
-ui/qg_dlgimageoptions.cpp: ui/qg_dlgimageoptions.h ui/qg_dlgimageoptions.ui ui/qg_dlgimageoptions.ui.h
- $(UIC) ui/qg_dlgimageoptions.ui -i qg_dlgimageoptions.h -o ui/qg_dlgimageoptions.cpp
-
-ui/qg_dlgarc.h: ui/qg_dlgarc.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgarc.ui -o ui/qg_dlgarc.h
-
-ui/qg_dlgarc.cpp: ui/qg_dlgarc.h ui/qg_dlgarc.ui ui/qg_dlgarc.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgarc.ui -i qg_dlgarc.h -o ui/qg_dlgarc.cpp
-
-ui/qg_dlgcircle.h: ui/qg_dlgcircle.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgcircle.ui -o ui/qg_dlgcircle.h
-
-ui/qg_dlgcircle.cpp: ui/qg_dlgcircle.h ui/qg_dlgcircle.ui ui/qg_dlgcircle.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgcircle.ui -i qg_dlgcircle.h -o ui/qg_dlgcircle.cpp
-
-ui/qg_dlgdimension.h: ui/qg_dlgdimension.ui ui/qg_widgetpen.h \
- qg_layerbox.h \
- ui/qg_dimensionlabeleditor.h
- $(UIC) ui/qg_dlgdimension.ui -o ui/qg_dlgdimension.h
-
-ui/qg_dlgdimension.cpp: ui/qg_dlgdimension.h ui/qg_dlgdimension.ui ui/qg_dlgdimension.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h \
- ui/qg_dimensionlabeleditor.h
- $(UIC) ui/qg_dlgdimension.ui -i qg_dlgdimension.h -o ui/qg_dlgdimension.cpp
-
-ui/qg_dlgdimlinear.h: ui/qg_dlgdimlinear.ui ui/qg_widgetpen.h \
- qg_layerbox.h \
- ui/qg_dimensionlabeleditor.h
- $(UIC) ui/qg_dlgdimlinear.ui -o ui/qg_dlgdimlinear.h
-
-ui/qg_dlgdimlinear.cpp: ui/qg_dlgdimlinear.h ui/qg_dlgdimlinear.ui ui/qg_dlgdimlinear.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h \
- ui/qg_dimensionlabeleditor.h
- $(UIC) ui/qg_dlgdimlinear.ui -i qg_dlgdimlinear.h -o ui/qg_dlgdimlinear.cpp
-
-ui/qg_dlgline.h: ui/qg_dlgline.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgline.ui -o ui/qg_dlgline.h
-
-ui/qg_dlgline.cpp: ui/qg_dlgline.h ui/qg_dlgline.ui ui/qg_dlgline.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgline.ui -i qg_dlgline.h -o ui/qg_dlgline.cpp
-
-ui/qg_dlgellipse.h: ui/qg_dlgellipse.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgellipse.ui -o ui/qg_dlgellipse.h
-
-ui/qg_dlgellipse.cpp: ui/qg_dlgellipse.h ui/qg_dlgellipse.ui ui/qg_dlgellipse.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgellipse.ui -i qg_dlgellipse.h -o ui/qg_dlgellipse.cpp
-
-ui/qg_dlgmirror.h: ui/qg_dlgmirror.ui
- $(UIC) ui/qg_dlgmirror.ui -o ui/qg_dlgmirror.h
-
-ui/qg_dlgmirror.cpp: ui/qg_dlgmirror.h ui/qg_dlgmirror.ui ui/qg_dlgmirror.ui.h
- $(UIC) ui/qg_dlgmirror.ui -i qg_dlgmirror.h -o ui/qg_dlgmirror.cpp
-
-ui/qg_dlgmove.h: ui/qg_dlgmove.ui
- $(UIC) ui/qg_dlgmove.ui -o ui/qg_dlgmove.h
-
-ui/qg_dlgmove.cpp: ui/qg_dlgmove.h ui/qg_dlgmove.ui ui/qg_dlgmove.ui.h
- $(UIC) ui/qg_dlgmove.ui -i qg_dlgmove.h -o ui/qg_dlgmove.cpp
-
-ui/qg_dlgmoverotate.h: ui/qg_dlgmoverotate.ui
- $(UIC) ui/qg_dlgmoverotate.ui -o ui/qg_dlgmoverotate.h
-
-ui/qg_dlgmoverotate.cpp: ui/qg_dlgmoverotate.h ui/qg_dlgmoverotate.ui ui/qg_dlgmoverotate.ui.h
- $(UIC) ui/qg_dlgmoverotate.ui -i qg_dlgmoverotate.h -o ui/qg_dlgmoverotate.cpp
-
-ui/qg_dlgoptionsdrawing.h: ui/qg_dlgoptionsdrawing.ui
- $(UIC) ui/qg_dlgoptionsdrawing.ui -o ui/qg_dlgoptionsdrawing.h
-
-ui/qg_dlgoptionsdrawing.cpp: ui/qg_dlgoptionsdrawing.h ui/qg_dlgoptionsdrawing.ui ui/qg_dlgoptionsdrawing.ui.h
- $(UIC) ui/qg_dlgoptionsdrawing.ui -i qg_dlgoptionsdrawing.h -o ui/qg_dlgoptionsdrawing.cpp
-
-ui/qg_dlgoptionsgeneral.h: ui/qg_dlgoptionsgeneral.ui
- $(UIC) ui/qg_dlgoptionsgeneral.ui -o ui/qg_dlgoptionsgeneral.h
-
-ui/qg_dlgoptionsgeneral.cpp: ui/qg_dlgoptionsgeneral.h ui/qg_dlgoptionsgeneral.ui ui/qg_dlgoptionsgeneral.ui.h
- $(UIC) ui/qg_dlgoptionsgeneral.ui -i qg_dlgoptionsgeneral.h -o ui/qg_dlgoptionsgeneral.cpp
-
-ui/qg_dlgpoint.h: ui/qg_dlgpoint.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgpoint.ui -o ui/qg_dlgpoint.h
-
-ui/qg_dlgpoint.cpp: ui/qg_dlgpoint.h ui/qg_dlgpoint.ui ui/qg_dlgpoint.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgpoint.ui -i qg_dlgpoint.h -o ui/qg_dlgpoint.cpp
-
-ui/qg_dlgrotate.h: ui/qg_dlgrotate.ui
- $(UIC) ui/qg_dlgrotate.ui -o ui/qg_dlgrotate.h
-
-ui/qg_dlgrotate.cpp: ui/qg_dlgrotate.h ui/qg_dlgrotate.ui ui/qg_dlgrotate.ui.h
- $(UIC) ui/qg_dlgrotate.ui -i qg_dlgrotate.h -o ui/qg_dlgrotate.cpp
-
-ui/qg_dlgrotate2.h: ui/qg_dlgrotate2.ui
- $(UIC) ui/qg_dlgrotate2.ui -o ui/qg_dlgrotate2.h
-
-ui/qg_dlgrotate2.cpp: ui/qg_dlgrotate2.h ui/qg_dlgrotate2.ui ui/qg_dlgrotate2.ui.h
- $(UIC) ui/qg_dlgrotate2.ui -i qg_dlgrotate2.h -o ui/qg_dlgrotate2.cpp
-
-ui/qg_dlgscale.h: ui/qg_dlgscale.ui
- $(UIC) ui/qg_dlgscale.ui -o ui/qg_dlgscale.h
-
-ui/qg_dlgscale.cpp: ui/qg_dlgscale.h ui/qg_dlgscale.ui ui/qg_dlgscale.ui.h
- $(UIC) ui/qg_dlgscale.ui -i qg_dlgscale.h -o ui/qg_dlgscale.cpp
-
-ui/qg_dlgspline.h: ui/qg_dlgspline.ui ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgspline.ui -o ui/qg_dlgspline.h
-
-ui/qg_dlgspline.cpp: ui/qg_dlgspline.h ui/qg_dlgspline.ui ui/qg_dlgspline.ui.h ui/qg_widgetpen.h \
- qg_layerbox.h
- $(UIC) ui/qg_dlgspline.ui -i qg_dlgspline.h -o ui/qg_dlgspline.cpp
-
-ui/qg_dlgtext.h: ui/qg_dlgtext.ui qg_fontbox.h
- $(UIC) ui/qg_dlgtext.ui -o ui/qg_dlgtext.h
-
-ui/qg_dlgtext.cpp: ui/qg_dlgtext.h ui/qg_dlgtext.ui ui/qg_dlgtext.ui.h qg_fontbox.h
- $(UIC) ui/qg_dlgtext.ui -i qg_dlgtext.h -o ui/qg_dlgtext.cpp
-
-ui/qg_exitdialog.h: ui/qg_exitdialog.ui
- $(UIC) ui/qg_exitdialog.ui -o ui/qg_exitdialog.h
-
-ui/qg_exitdialog.cpp: ui/qg_exitdialog.h ui/qg_exitdialog.ui ui/qg_exitdialog.ui.h
- $(UIC) ui/qg_exitdialog.ui -i qg_exitdialog.h -o ui/qg_exitdialog.cpp
-
-ui/qg_imageoptions.h: ui/qg_imageoptions.ui
- $(UIC) ui/qg_imageoptions.ui -o ui/qg_imageoptions.h
-
-ui/qg_imageoptions.cpp: ui/qg_imageoptions.h ui/qg_imageoptions.ui ui/qg_imageoptions.ui.h
- $(UIC) ui/qg_imageoptions.ui -i qg_imageoptions.h -o ui/qg_imageoptions.cpp
-
-ui/qg_insertoptions.h: ui/qg_insertoptions.ui
- $(UIC) ui/qg_insertoptions.ui -o ui/qg_insertoptions.h
-
-ui/qg_insertoptions.cpp: ui/qg_insertoptions.h ui/qg_insertoptions.ui ui/qg_insertoptions.ui.h
- $(UIC) ui/qg_insertoptions.ui -i qg_insertoptions.h -o ui/qg_insertoptions.cpp
-
-ui/qg_layerdialog.h: ui/qg_layerdialog.ui ui/qg_widgetpen.h
- $(UIC) ui/qg_layerdialog.ui -o ui/qg_layerdialog.h
-
-ui/qg_layerdialog.cpp: ui/qg_layerdialog.h ui/qg_layerdialog.ui ui/qg_layerdialog.ui.h ui/qg_widgetpen.h
- $(UIC) ui/qg_layerdialog.ui -i qg_layerdialog.h -o ui/qg_layerdialog.cpp
-
-ui/qg_libraryinsertoptions.h: ui/qg_libraryinsertoptions.ui
- $(UIC) ui/qg_libraryinsertoptions.ui -o ui/qg_libraryinsertoptions.h
-
-ui/qg_libraryinsertoptions.cpp: ui/qg_libraryinsertoptions.h ui/qg_libraryinsertoptions.ui ui/qg_libraryinsertoptions.ui.h
- $(UIC) ui/qg_libraryinsertoptions.ui -i qg_libraryinsertoptions.h -o ui/qg_libraryinsertoptions.cpp
-
-ui/qg_librarywidget.h: ui/qg_librarywidget.ui qg_actionhandler.h \
- qg_listviewitem.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_librarywidget.ui -o ui/qg_librarywidget.h
-
-ui/qg_librarywidget.cpp: ui/qg_librarywidget.h ui/qg_librarywidget.ui ui/qg_librarywidget.ui.h qg_actionhandler.h \
- qg_listviewitem.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(UIC) ui/qg_librarywidget.ui -i qg_librarywidget.h -o ui/qg_librarywidget.cpp
-
-ui/qg_lineangleoptions.h: ui/qg_lineangleoptions.ui
- $(UIC) ui/qg_lineangleoptions.ui -o ui/qg_lineangleoptions.h
-
-ui/qg_lineangleoptions.cpp: ui/qg_lineangleoptions.h ui/qg_lineangleoptions.ui ui/qg_lineangleoptions.ui.h
- $(UIC) ui/qg_lineangleoptions.ui -i qg_lineangleoptions.h -o ui/qg_lineangleoptions.cpp
-
-ui/qg_linebisectoroptions.h: ui/qg_linebisectoroptions.ui
- $(UIC) ui/qg_linebisectoroptions.ui -o ui/qg_linebisectoroptions.h
-
-ui/qg_linebisectoroptions.cpp: ui/qg_linebisectoroptions.h ui/qg_linebisectoroptions.ui ui/qg_linebisectoroptions.ui.h
- $(UIC) ui/qg_linebisectoroptions.ui -i qg_linebisectoroptions.h -o ui/qg_linebisectoroptions.cpp
-
-ui/qg_lineoptions.h: ui/qg_lineoptions.ui
- $(UIC) ui/qg_lineoptions.ui -o ui/qg_lineoptions.h
-
-ui/qg_lineoptions.cpp: ui/qg_lineoptions.h ui/qg_lineoptions.ui ui/qg_lineoptions.ui.h
- $(UIC) ui/qg_lineoptions.ui -i qg_lineoptions.h -o ui/qg_lineoptions.cpp
-
-ui/qg_lineparalleloptions.h: ui/qg_lineparalleloptions.ui
- $(UIC) ui/qg_lineparalleloptions.ui -o ui/qg_lineparalleloptions.h
-
-ui/qg_lineparalleloptions.cpp: ui/qg_lineparalleloptions.h ui/qg_lineparalleloptions.ui ui/qg_lineparalleloptions.ui.h
- $(UIC) ui/qg_lineparalleloptions.ui -i qg_lineparalleloptions.h -o ui/qg_lineparalleloptions.cpp
-
-ui/qg_lineparallelthroughoptions.h: ui/qg_lineparallelthroughoptions.ui
- $(UIC) ui/qg_lineparallelthroughoptions.ui -o ui/qg_lineparallelthroughoptions.h
-
-ui/qg_lineparallelthroughoptions.cpp: ui/qg_lineparallelthroughoptions.h ui/qg_lineparallelthroughoptions.ui ui/qg_lineparallelthroughoptions.ui.h
- $(UIC) ui/qg_lineparallelthroughoptions.ui -i qg_lineparallelthroughoptions.h -o ui/qg_lineparallelthroughoptions.cpp
-
-ui/qg_linepolygon2options.h: ui/qg_linepolygon2options.ui
- $(UIC) ui/qg_linepolygon2options.ui -o ui/qg_linepolygon2options.h
-
-ui/qg_linepolygon2options.cpp: ui/qg_linepolygon2options.h ui/qg_linepolygon2options.ui ui/qg_linepolygon2options.ui.h
- $(UIC) ui/qg_linepolygon2options.ui -i qg_linepolygon2options.h -o ui/qg_linepolygon2options.cpp
-
-ui/qg_linepolygonoptions.h: ui/qg_linepolygonoptions.ui
- $(UIC) ui/qg_linepolygonoptions.ui -o ui/qg_linepolygonoptions.h
-
-ui/qg_linepolygonoptions.cpp: ui/qg_linepolygonoptions.h ui/qg_linepolygonoptions.ui ui/qg_linepolygonoptions.ui.h
- $(UIC) ui/qg_linepolygonoptions.ui -i qg_linepolygonoptions.h -o ui/qg_linepolygonoptions.cpp
-
-ui/qg_linerelangleoptions.h: ui/qg_linerelangleoptions.ui
- $(UIC) ui/qg_linerelangleoptions.ui -o ui/qg_linerelangleoptions.h
-
-ui/qg_linerelangleoptions.cpp: ui/qg_linerelangleoptions.h ui/qg_linerelangleoptions.ui ui/qg_linerelangleoptions.ui.h
- $(UIC) ui/qg_linerelangleoptions.ui -i qg_linerelangleoptions.h -o ui/qg_linerelangleoptions.cpp
-
-ui/qg_mousewidget.h: ui/qg_mousewidget.ui
- $(UIC) ui/qg_mousewidget.ui -o ui/qg_mousewidget.h
-
-ui/qg_mousewidget.cpp: ui/qg_mousewidget.h ui/qg_mousewidget.ui ui/qg_mousewidget.ui.h
- $(UIC) ui/qg_mousewidget.ui -i qg_mousewidget.h -o ui/qg_mousewidget.cpp
-
-ui/qg_moverotateoptions.h: ui/qg_moverotateoptions.ui
- $(UIC) ui/qg_moverotateoptions.ui -o ui/qg_moverotateoptions.h
-
-ui/qg_moverotateoptions.cpp: ui/qg_moverotateoptions.h ui/qg_moverotateoptions.ui ui/qg_moverotateoptions.ui.h
- $(UIC) ui/qg_moverotateoptions.ui -i qg_moverotateoptions.h -o ui/qg_moverotateoptions.cpp
-
-ui/qg_printpreviewoptions.h: ui/qg_printpreviewoptions.ui
- $(UIC) ui/qg_printpreviewoptions.ui -o ui/qg_printpreviewoptions.h
-
-ui/qg_printpreviewoptions.cpp: ui/qg_printpreviewoptions.h ui/qg_printpreviewoptions.ui ui/qg_printpreviewoptions.ui.h
- $(UIC) ui/qg_printpreviewoptions.ui -i qg_printpreviewoptions.h -o ui/qg_printpreviewoptions.cpp
-
-ui/qg_roundoptions.h: ui/qg_roundoptions.ui
- $(UIC) ui/qg_roundoptions.ui -o ui/qg_roundoptions.h
-
-ui/qg_roundoptions.cpp: ui/qg_roundoptions.h ui/qg_roundoptions.ui ui/qg_roundoptions.ui.h
- $(UIC) ui/qg_roundoptions.ui -i qg_roundoptions.h -o ui/qg_roundoptions.cpp
-
-ui/qg_selectionwidget.h: ui/qg_selectionwidget.ui
- $(UIC) ui/qg_selectionwidget.ui -o ui/qg_selectionwidget.h
-
-ui/qg_selectionwidget.cpp: ui/qg_selectionwidget.h ui/qg_selectionwidget.ui ui/qg_selectionwidget.ui.h
- $(UIC) ui/qg_selectionwidget.ui -i qg_selectionwidget.h -o ui/qg_selectionwidget.cpp
-
-ui/qg_snapdistoptions.h: ui/qg_snapdistoptions.ui
- $(UIC) ui/qg_snapdistoptions.ui -o ui/qg_snapdistoptions.h
-
-ui/qg_snapdistoptions.cpp: ui/qg_snapdistoptions.h ui/qg_snapdistoptions.ui ui/qg_snapdistoptions.ui.h
- $(UIC) ui/qg_snapdistoptions.ui -i qg_snapdistoptions.h -o ui/qg_snapdistoptions.cpp
-
-ui/qg_splineoptions.h: ui/qg_splineoptions.ui
- $(UIC) ui/qg_splineoptions.ui -o ui/qg_splineoptions.h
-
-ui/qg_splineoptions.cpp: ui/qg_splineoptions.h ui/qg_splineoptions.ui ui/qg_splineoptions.ui.h
- $(UIC) ui/qg_splineoptions.ui -i qg_splineoptions.h -o ui/qg_splineoptions.cpp
-
-ui/qg_textoptions.h: ui/qg_textoptions.ui
- $(UIC) ui/qg_textoptions.ui -o ui/qg_textoptions.h
-
-ui/qg_textoptions.cpp: ui/qg_textoptions.h ui/qg_textoptions.ui ui/qg_textoptions.ui.h
- $(UIC) ui/qg_textoptions.ui -i qg_textoptions.h -o ui/qg_textoptions.cpp
-
-ui/qg_trimamountoptions.h: ui/qg_trimamountoptions.ui
- $(UIC) ui/qg_trimamountoptions.ui -o ui/qg_trimamountoptions.h
-
-ui/qg_trimamountoptions.cpp: ui/qg_trimamountoptions.h ui/qg_trimamountoptions.ui ui/qg_trimamountoptions.ui.h
- $(UIC) ui/qg_trimamountoptions.ui -i qg_trimamountoptions.h -o ui/qg_trimamountoptions.cpp
-
-ui/qg_widgetpen.h: ui/qg_widgetpen.ui qg_colorbox.h \
- qg_widthbox.h \
- qg_linetypebox.h
- $(UIC) ui/qg_widgetpen.ui -o ui/qg_widgetpen.h
-
-ui/qg_widgetpen.cpp: ui/qg_widgetpen.h ui/qg_widgetpen.ui ui/qg_widgetpen.ui.h qg_colorbox.h \
- qg_widthbox.h \
- qg_linetypebox.h
- $(UIC) ui/qg_widgetpen.ui -i qg_widgetpen.h -o ui/qg_widgetpen.cpp
-
-ui/qg_polylineoptions.h: ui/qg_polylineoptions.ui
- $(UIC) ui/qg_polylineoptions.ui -o ui/qg_polylineoptions.h
-
-ui/qg_polylineoptions.cpp: ui/qg_polylineoptions.h ui/qg_polylineoptions.ui ui/qg_polylineoptions.ui.h
- $(UIC) ui/qg_polylineoptions.ui -i qg_polylineoptions.h -o ui/qg_polylineoptions.cpp
-
-obj/qg_commandwidget.o: ui/qg_commandwidget.cpp ui/qg_commandwidget.ui.h \
- ui/qg_commandwidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_commandwidget.o ui/qg_commandwidget.cpp
-
-obj/qg_arcoptions.o: ui/qg_arcoptions.cpp ui/qg_arcoptions.ui.h \
- ui/qg_arcoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_arcoptions.o ui/qg_arcoptions.cpp
-
-obj/qg_arctangentialoptions.o: ui/qg_arctangentialoptions.cpp ui/qg_arctangentialoptions.ui.h \
- ui/qg_arctangentialoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_arctangentialoptions.o ui/qg_arctangentialoptions.cpp
-
-obj/qg_beveloptions.o: ui/qg_beveloptions.cpp ui/qg_beveloptions.ui.h \
- ui/qg_beveloptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_beveloptions.o ui/qg_beveloptions.cpp
-
-obj/qg_blockdialog.o: ui/qg_blockdialog.cpp ui/qg_blockdialog.ui.h \
- ui/qg_blockdialog.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_blockdialog.o ui/qg_blockdialog.cpp
-
-obj/qg_cadtoolbar.o: ui/qg_cadtoolbar.cpp ui/qg_cadtoolbar.ui.h \
- ui/qg_cadtoolbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbar.o ui/qg_cadtoolbar.cpp
-
-obj/qg_cadtoolbararcs.o: ui/qg_cadtoolbararcs.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbararcs.ui.h \
- ui/qg_cadtoolbararcs.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbararcs.o ui/qg_cadtoolbararcs.cpp
-
-obj/qg_cadtoolbarcircles.o: ui/qg_cadtoolbarcircles.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarcircles.ui.h \
- ui/qg_cadtoolbarcircles.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarcircles.o ui/qg_cadtoolbarcircles.cpp
-
-obj/qg_cadtoolbardim.o: ui/qg_cadtoolbardim.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbardim.ui.h \
- ui/qg_cadtoolbardim.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbardim.o ui/qg_cadtoolbardim.cpp
-
-obj/qg_cadtoolbarellipses.o: ui/qg_cadtoolbarellipses.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarellipses.ui.h \
- ui/qg_cadtoolbarellipses.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarellipses.o ui/qg_cadtoolbarellipses.cpp
-
-obj/qg_cadtoolbarinfo.o: ui/qg_cadtoolbarinfo.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarinfo.ui.h \
- ui/qg_cadtoolbarinfo.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarinfo.o ui/qg_cadtoolbarinfo.cpp
-
-obj/qg_cadtoolbarlines.o: ui/qg_cadtoolbarlines.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarlines.ui.h \
- ui/qg_cadtoolbarlines.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarlines.o ui/qg_cadtoolbarlines.cpp
-
-obj/qg_cadtoolbarmain.o: ui/qg_cadtoolbarmain.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarmain.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarmain.o ui/qg_cadtoolbarmain.cpp
-
-obj/qg_cadtoolbarmodify.o: ui/qg_cadtoolbarmodify.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarmodify.ui.h \
- ui/qg_cadtoolbarmodify.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarmodify.o ui/qg_cadtoolbarmodify.cpp
-
-obj/qg_cadtoolbarpoints.o: ui/qg_cadtoolbarpoints.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarpoints.ui.h \
- ui/qg_cadtoolbarpoints.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarpoints.o ui/qg_cadtoolbarpoints.cpp
-
-obj/qg_cadtoolbarpolylines.o: ui/qg_cadtoolbarpolylines.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarpolylines.ui.h \
- ui/qg_cadtoolbarpolylines.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarpolylines.o ui/qg_cadtoolbarpolylines.cpp
-
-obj/qg_cadtoolbarselect.o: ui/qg_cadtoolbarselect.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarselect.ui.h \
- ui/qg_cadtoolbarselect.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarselect.o ui/qg_cadtoolbarselect.cpp
-
-obj/qg_cadtoolbarsnap.o: ui/qg_cadtoolbarsnap.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarsnap.ui.h \
- ui/qg_cadtoolbarsnap.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarsnap.o ui/qg_cadtoolbarsnap.cpp
-
-obj/qg_cadtoolbarsplines.o: ui/qg_cadtoolbarsplines.cpp ui/qg_cadtoolbar.h \
- ui/qg_cadtoolbarsplines.ui.h \
- ui/qg_cadtoolbarsplines.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_cadtoolbarsplines.o ui/qg_cadtoolbarsplines.cpp
-
-obj/qg_circleoptions.o: ui/qg_circleoptions.cpp ui/qg_circleoptions.ui.h \
- ui/qg_circleoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_circleoptions.o ui/qg_circleoptions.cpp
-
-obj/qg_coordinatewidget.o: ui/qg_coordinatewidget.cpp ui/qg_coordinatewidget.ui.h \
- ui/qg_coordinatewidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_coordinatewidget.o ui/qg_coordinatewidget.cpp
-
-obj/qg_dimensionlabeleditor.o: ui/qg_dimensionlabeleditor.cpp ui/qg_dimensionlabeleditor.ui.h \
- ui/qg_dimensionlabeleditor.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dimensionlabeleditor.o ui/qg_dimensionlabeleditor.cpp
-
-obj/qg_dimlinearoptions.o: ui/qg_dimlinearoptions.cpp ui/qg_dimlinearoptions.ui.h \
- ui/qg_dimlinearoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dimlinearoptions.o ui/qg_dimlinearoptions.cpp
-
-obj/qg_dimoptions.o: ui/qg_dimoptions.cpp ui/qg_dimoptions.ui.h \
- ui/qg_dimoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dimoptions.o ui/qg_dimoptions.cpp
-
-obj/qg_dlgattributes.o: ui/qg_dlgattributes.cpp ui/qg_dlgattributes.ui.h \
- ui/qg_dlgattributes.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgattributes.o ui/qg_dlgattributes.cpp
-
-obj/qg_dlghatch.o: ui/qg_dlghatch.cpp ui/qg_dlghatch.ui.h \
- ui/qg_dlghatch.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlghatch.o ui/qg_dlghatch.cpp
-
-obj/qg_dlginitial.o: ui/qg_dlginitial.cpp ui/qg_dlginitial.ui.h \
- ui/qg_dlginitial.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlginitial.o ui/qg_dlginitial.cpp
-
-obj/qg_dlginsert.o: ui/qg_dlginsert.cpp ui/qg_dlginsert.ui.h \
- ui/qg_dlginsert.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlginsert.o ui/qg_dlginsert.cpp
-
-obj/qg_dlgimageoptions.o: ui/qg_dlgimageoptions.cpp ui/qg_dlgimageoptions.ui.h \
- ui/qg_dlgimageoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgimageoptions.o ui/qg_dlgimageoptions.cpp
-
-obj/qg_dlgarc.o: ui/qg_dlgarc.cpp ui/qg_dlgarc.ui.h \
- ui/qg_dlgarc.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgarc.o ui/qg_dlgarc.cpp
-
-obj/qg_dlgcircle.o: ui/qg_dlgcircle.cpp ui/qg_dlgcircle.ui.h \
- ui/qg_dlgcircle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgcircle.o ui/qg_dlgcircle.cpp
-
-obj/qg_dlgdimension.o: ui/qg_dlgdimension.cpp ui/qg_dlgdimension.ui.h \
- ui/qg_dlgdimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgdimension.o ui/qg_dlgdimension.cpp
-
-obj/qg_dlgdimlinear.o: ui/qg_dlgdimlinear.cpp ui/qg_dlgdimlinear.ui.h \
- ui/qg_dlgdimlinear.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgdimlinear.o ui/qg_dlgdimlinear.cpp
-
-obj/qg_dlgline.o: ui/qg_dlgline.cpp ui/qg_dlgline.ui.h \
- ui/qg_dlgline.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgline.o ui/qg_dlgline.cpp
-
-obj/qg_dlgellipse.o: ui/qg_dlgellipse.cpp ui/qg_dlgellipse.ui.h \
- ui/qg_dlgellipse.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgellipse.o ui/qg_dlgellipse.cpp
-
-obj/qg_dlgmirror.o: ui/qg_dlgmirror.cpp ui/qg_dlgmirror.ui.h \
- ui/qg_dlgmirror.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgmirror.o ui/qg_dlgmirror.cpp
-
-obj/qg_dlgmove.o: ui/qg_dlgmove.cpp ui/qg_dlgmove.ui.h \
- ui/qg_dlgmove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgmove.o ui/qg_dlgmove.cpp
-
-obj/qg_dlgmoverotate.o: ui/qg_dlgmoverotate.cpp ui/qg_dlgmoverotate.ui.h \
- ui/qg_dlgmoverotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgmoverotate.o ui/qg_dlgmoverotate.cpp
-
-obj/qg_dlgoptionsdrawing.o: ui/qg_dlgoptionsdrawing.cpp ui/qg_dlgoptionsdrawing.ui.h \
- ui/qg_dlgoptionsdrawing.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgoptionsdrawing.o ui/qg_dlgoptionsdrawing.cpp
-
-obj/qg_dlgoptionsgeneral.o: ui/qg_dlgoptionsgeneral.cpp ui/qg_dlgoptionsgeneral.ui.h \
- ui/qg_dlgoptionsgeneral.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgoptionsgeneral.o ui/qg_dlgoptionsgeneral.cpp
-
-obj/qg_dlgpoint.o: ui/qg_dlgpoint.cpp ui/qg_dlgpoint.ui.h \
- ui/qg_dlgpoint.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgpoint.o ui/qg_dlgpoint.cpp
-
-obj/qg_dlgrotate.o: ui/qg_dlgrotate.cpp ui/qg_dlgrotate.ui.h \
- ui/qg_dlgrotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgrotate.o ui/qg_dlgrotate.cpp
-
-obj/qg_dlgrotate2.o: ui/qg_dlgrotate2.cpp ui/qg_dlgrotate2.ui.h \
- ui/qg_dlgrotate2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgrotate2.o ui/qg_dlgrotate2.cpp
-
-obj/qg_dlgscale.o: ui/qg_dlgscale.cpp ui/qg_dlgscale.ui.h \
- ui/qg_dlgscale.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgscale.o ui/qg_dlgscale.cpp
-
-obj/qg_dlgspline.o: ui/qg_dlgspline.cpp ui/qg_dlgspline.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgspline.o ui/qg_dlgspline.cpp
-
-obj/qg_dlgtext.o: ui/qg_dlgtext.cpp ui/qg_dlgtext.ui.h \
- ui/qg_dlgtext.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_dlgtext.o ui/qg_dlgtext.cpp
-
-obj/qg_exitdialog.o: ui/qg_exitdialog.cpp ui/qg_exitdialog.ui.h \
- ui/qg_exitdialog.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_exitdialog.o ui/qg_exitdialog.cpp
-
-obj/qg_imageoptions.o: ui/qg_imageoptions.cpp ui/qg_imageoptions.ui.h \
- ui/qg_imageoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_imageoptions.o ui/qg_imageoptions.cpp
-
-obj/qg_insertoptions.o: ui/qg_insertoptions.cpp ui/qg_insertoptions.ui.h \
- ui/qg_insertoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_insertoptions.o ui/qg_insertoptions.cpp
-
-obj/qg_layerdialog.o: ui/qg_layerdialog.cpp ui/qg_layerdialog.ui.h \
- ui/qg_layerdialog.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_layerdialog.o ui/qg_layerdialog.cpp
-
-obj/qg_libraryinsertoptions.o: ui/qg_libraryinsertoptions.cpp ui/qg_libraryinsertoptions.ui.h \
- ui/qg_libraryinsertoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_libraryinsertoptions.o ui/qg_libraryinsertoptions.cpp
-
-obj/qg_librarywidget.o: ui/qg_librarywidget.cpp ui/qg_librarywidget.ui.h \
- ui/qg_librarywidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_librarywidget.o ui/qg_librarywidget.cpp
-
-obj/qg_lineangleoptions.o: ui/qg_lineangleoptions.cpp ui/qg_lineangleoptions.ui.h \
- ui/qg_lineangleoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_lineangleoptions.o ui/qg_lineangleoptions.cpp
-
-obj/qg_linebisectoroptions.o: ui/qg_linebisectoroptions.cpp ui/qg_linebisectoroptions.ui.h \
- ui/qg_linebisectoroptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_linebisectoroptions.o ui/qg_linebisectoroptions.cpp
-
-obj/qg_lineoptions.o: ui/qg_lineoptions.cpp ui/qg_lineoptions.ui.h \
- ui/qg_lineoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_lineoptions.o ui/qg_lineoptions.cpp
-
-obj/qg_lineparalleloptions.o: ui/qg_lineparalleloptions.cpp ui/qg_lineparalleloptions.ui.h \
- ui/qg_lineparalleloptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_lineparalleloptions.o ui/qg_lineparalleloptions.cpp
-
-obj/qg_lineparallelthroughoptions.o: ui/qg_lineparallelthroughoptions.cpp ui/qg_lineparallelthroughoptions.ui.h \
- ui/qg_lineparallelthroughoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_lineparallelthroughoptions.o ui/qg_lineparallelthroughoptions.cpp
-
-obj/qg_linepolygon2options.o: ui/qg_linepolygon2options.cpp ui/qg_linepolygon2options.ui.h \
- ui/qg_linepolygon2options.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_linepolygon2options.o ui/qg_linepolygon2options.cpp
-
-obj/qg_linepolygonoptions.o: ui/qg_linepolygonoptions.cpp ui/qg_linepolygonoptions.ui.h \
- ui/qg_linepolygonoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_linepolygonoptions.o ui/qg_linepolygonoptions.cpp
-
-obj/qg_linerelangleoptions.o: ui/qg_linerelangleoptions.cpp ui/qg_linerelangleoptions.ui.h \
- ui/qg_linerelangleoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_linerelangleoptions.o ui/qg_linerelangleoptions.cpp
-
-obj/qg_mousewidget.o: ui/qg_mousewidget.cpp ui/qg_mousewidget.ui.h \
- ui/qg_mousewidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_mousewidget.o ui/qg_mousewidget.cpp
-
-obj/qg_moverotateoptions.o: ui/qg_moverotateoptions.cpp ui/qg_moverotateoptions.ui.h \
- ui/qg_moverotateoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_moverotateoptions.o ui/qg_moverotateoptions.cpp
-
-obj/qg_printpreviewoptions.o: ui/qg_printpreviewoptions.cpp ui/qg_printpreviewoptions.ui.h \
- ui/qg_printpreviewoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_printpreviewoptions.o ui/qg_printpreviewoptions.cpp
-
-obj/qg_roundoptions.o: ui/qg_roundoptions.cpp ui/qg_roundoptions.ui.h \
- ui/qg_roundoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_roundoptions.o ui/qg_roundoptions.cpp
-
-obj/qg_selectionwidget.o: ui/qg_selectionwidget.cpp ui/qg_selectionwidget.ui.h \
- ui/qg_selectionwidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_selectionwidget.o ui/qg_selectionwidget.cpp
-
-obj/qg_snapdistoptions.o: ui/qg_snapdistoptions.cpp ui/qg_snapdistoptions.ui.h \
- ui/qg_snapdistoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_snapdistoptions.o ui/qg_snapdistoptions.cpp
-
-obj/qg_splineoptions.o: ui/qg_splineoptions.cpp ui/qg_splineoptions.ui.h \
- ui/qg_splineoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_splineoptions.o ui/qg_splineoptions.cpp
-
-obj/qg_textoptions.o: ui/qg_textoptions.cpp ui/qg_textoptions.ui.h \
- ui/qg_textoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_textoptions.o ui/qg_textoptions.cpp
-
-obj/qg_trimamountoptions.o: ui/qg_trimamountoptions.cpp ui/qg_trimamountoptions.ui.h \
- ui/qg_trimamountoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_trimamountoptions.o ui/qg_trimamountoptions.cpp
-
-obj/qg_widgetpen.o: ui/qg_widgetpen.cpp ui/qg_widgetpen.ui.h \
- ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_widgetpen.o ui/qg_widgetpen.cpp
-
-obj/qg_polylineoptions.o: ui/qg_polylineoptions.cpp ui/qg_polylineoptions.ui.h \
- ui/qg_polylineoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/qg_polylineoptions.o ui/qg_polylineoptions.cpp
-
-obj/moc_qg_actionfactory.o: moc/moc_qg_actionfactory.cpp qg_actionfactory.h qg_actionhandler.h \
- qg_mainwindowinterface.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_actionfactory.o moc/moc_qg_actionfactory.cpp
-
-obj/moc_qg_actionhandler.o: moc/moc_qg_actionhandler.cpp qg_actionhandler.h qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_actionhandler.o moc/moc_qg_actionhandler.cpp
-
-obj/moc_qg_blockwidget.o: moc/moc_qg_blockwidget.cpp qg_blockwidget.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_blockwidget.o moc/moc_qg_blockwidget.cpp
-
-obj/moc_qg_colorbox.o: moc/moc_qg_colorbox.cpp qg_colorbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_colorbox.o moc/moc_qg_colorbox.cpp
-
-obj/moc_qg_commandedit.o: moc/moc_qg_commandedit.cpp qg_commandedit.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_commandedit.o moc/moc_qg_commandedit.cpp
-
-obj/moc_qg_fontbox.o: moc/moc_qg_fontbox.cpp qg_fontbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_fontbox.o moc/moc_qg_fontbox.cpp
-
-obj/moc_qg_graphicview.o: moc/moc_qg_graphicview.cpp qg_graphicview.h qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_graphicview.o moc/moc_qg_graphicview.cpp
-
-obj/moc_qg_layerbox.o: moc/moc_qg_layerbox.cpp qg_layerbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_layerbox.o moc/moc_qg_layerbox.cpp
-
-obj/moc_qg_layerwidget.o: moc/moc_qg_layerwidget.cpp qg_layerwidget.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_layerwidget.o moc/moc_qg_layerwidget.cpp
-
-obj/moc_qg_linetypebox.o: moc/moc_qg_linetypebox.cpp qg_linetypebox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_linetypebox.o moc/moc_qg_linetypebox.cpp
-
-obj/moc_qg_patternbox.o: moc/moc_qg_patternbox.cpp qg_patternbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_patternbox.o moc/moc_qg_patternbox.cpp
-
-obj/moc_qg_pentoolbar.o: moc/moc_qg_pentoolbar.cpp qg_pentoolbar.h qg_colorbox.h \
- qg_widthbox.h \
- qg_linetypebox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_pentoolbar.o moc/moc_qg_pentoolbar.cpp
-
-obj/moc_qg_scrollbar.o: moc/moc_qg_scrollbar.cpp qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_scrollbar.o moc/moc_qg_scrollbar.cpp
-
-obj/moc_qg_widthbox.o: moc/moc_qg_widthbox.cpp qg_widthbox.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_widthbox.o moc/moc_qg_widthbox.cpp
-
-obj/moc_qg_commandwidget.o: moc/moc_qg_commandwidget.cpp ui/qg_commandwidget.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_commandwidget.o moc/moc_qg_commandwidget.cpp
-
-obj/moc_qg_arcoptions.o: moc/moc_qg_arcoptions.cpp ui/qg_arcoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_arcoptions.o moc/moc_qg_arcoptions.cpp
-
-obj/moc_qg_arctangentialoptions.o: moc/moc_qg_arctangentialoptions.cpp ui/qg_arctangentialoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_arctangentialoptions.o moc/moc_qg_arctangentialoptions.cpp
-
-obj/moc_qg_beveloptions.o: moc/moc_qg_beveloptions.cpp ui/qg_beveloptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_beveloptions.o moc/moc_qg_beveloptions.cpp
-
-obj/moc_qg_blockdialog.o: moc/moc_qg_blockdialog.cpp ui/qg_blockdialog.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_blockdialog.o moc/moc_qg_blockdialog.cpp
-
-obj/moc_qg_cadtoolbar.o: moc/moc_qg_cadtoolbar.cpp ui/qg_cadtoolbar.h ui/qg_cadtoolbararcs.h \
- ui/qg_cadtoolbarcircles.h \
- ui/qg_cadtoolbarmodify.h \
- ui/qg_cadtoolbarellipses.h \
- ui/qg_cadtoolbarlines.h \
- ui/qg_cadtoolbarpoints.h \
- ui/qg_cadtoolbardim.h \
- ui/qg_cadtoolbarsnap.h \
- ui/qg_cadtoolbarselect.h \
- ui/qg_cadtoolbarmain.h \
- ui/qg_cadtoolbarinfo.h \
- ui/qg_cadtoolbarsplines.h \
- ui/qg_cadtoolbarpolylines.h \
- qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbar.o moc/moc_qg_cadtoolbar.cpp
-
-obj/moc_qg_cadtoolbararcs.o: moc/moc_qg_cadtoolbararcs.cpp ui/qg_cadtoolbararcs.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbararcs.o moc/moc_qg_cadtoolbararcs.cpp
-
-obj/moc_qg_cadtoolbarcircles.o: moc/moc_qg_cadtoolbarcircles.cpp ui/qg_cadtoolbarcircles.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarcircles.o moc/moc_qg_cadtoolbarcircles.cpp
-
-obj/moc_qg_cadtoolbardim.o: moc/moc_qg_cadtoolbardim.cpp ui/qg_cadtoolbardim.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbardim.o moc/moc_qg_cadtoolbardim.cpp
-
-obj/moc_qg_cadtoolbarellipses.o: moc/moc_qg_cadtoolbarellipses.cpp ui/qg_cadtoolbarellipses.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarellipses.o moc/moc_qg_cadtoolbarellipses.cpp
-
-obj/moc_qg_cadtoolbarinfo.o: moc/moc_qg_cadtoolbarinfo.cpp ui/qg_cadtoolbarinfo.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarinfo.o moc/moc_qg_cadtoolbarinfo.cpp
-
-obj/moc_qg_cadtoolbarlines.o: moc/moc_qg_cadtoolbarlines.cpp ui/qg_cadtoolbarlines.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarlines.o moc/moc_qg_cadtoolbarlines.cpp
-
-obj/moc_qg_cadtoolbarmain.o: moc/moc_qg_cadtoolbarmain.cpp ui/qg_cadtoolbarmain.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarmain.o moc/moc_qg_cadtoolbarmain.cpp
-
-obj/moc_qg_cadtoolbarmodify.o: moc/moc_qg_cadtoolbarmodify.cpp ui/qg_cadtoolbarmodify.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarmodify.o moc/moc_qg_cadtoolbarmodify.cpp
-
-obj/moc_qg_cadtoolbarpoints.o: moc/moc_qg_cadtoolbarpoints.cpp ui/qg_cadtoolbarpoints.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarpoints.o moc/moc_qg_cadtoolbarpoints.cpp
-
-obj/moc_qg_cadtoolbarpolylines.o: moc/moc_qg_cadtoolbarpolylines.cpp ui/qg_cadtoolbarpolylines.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarpolylines.o moc/moc_qg_cadtoolbarpolylines.cpp
-
-obj/moc_qg_cadtoolbarselect.o: moc/moc_qg_cadtoolbarselect.cpp ui/qg_cadtoolbarselect.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarselect.o moc/moc_qg_cadtoolbarselect.cpp
-
-obj/moc_qg_cadtoolbarsnap.o: moc/moc_qg_cadtoolbarsnap.cpp ui/qg_cadtoolbarsnap.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarsnap.o moc/moc_qg_cadtoolbarsnap.cpp
-
-obj/moc_qg_cadtoolbarsplines.o: moc/moc_qg_cadtoolbarsplines.cpp ui/qg_cadtoolbarsplines.h qg_actionhandler.h \
- qg_graphicview.h \
- qg_scrollbar.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_cadtoolbarsplines.o moc/moc_qg_cadtoolbarsplines.cpp
-
-obj/moc_qg_circleoptions.o: moc/moc_qg_circleoptions.cpp ui/qg_circleoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_circleoptions.o moc/moc_qg_circleoptions.cpp
-
-obj/moc_qg_coordinatewidget.o: moc/moc_qg_coordinatewidget.cpp ui/qg_coordinatewidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_coordinatewidget.o moc/moc_qg_coordinatewidget.cpp
-
-obj/moc_qg_dimensionlabeleditor.o: moc/moc_qg_dimensionlabeleditor.cpp ui/qg_dimensionlabeleditor.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dimensionlabeleditor.o moc/moc_qg_dimensionlabeleditor.cpp
-
-obj/moc_qg_dimlinearoptions.o: moc/moc_qg_dimlinearoptions.cpp ui/qg_dimlinearoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dimlinearoptions.o moc/moc_qg_dimlinearoptions.cpp
-
-obj/moc_qg_dimoptions.o: moc/moc_qg_dimoptions.cpp ui/qg_dimoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dimoptions.o moc/moc_qg_dimoptions.cpp
-
-obj/moc_qg_dlgattributes.o: moc/moc_qg_dlgattributes.cpp ui/qg_dlgattributes.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgattributes.o moc/moc_qg_dlgattributes.cpp
-
-obj/moc_qg_dlghatch.o: moc/moc_qg_dlghatch.cpp ui/qg_dlghatch.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlghatch.o moc/moc_qg_dlghatch.cpp
-
-obj/moc_qg_dlginitial.o: moc/moc_qg_dlginitial.cpp ui/qg_dlginitial.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlginitial.o moc/moc_qg_dlginitial.cpp
-
-obj/moc_qg_dlginsert.o: moc/moc_qg_dlginsert.cpp ui/qg_dlginsert.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlginsert.o moc/moc_qg_dlginsert.cpp
-
-obj/moc_qg_dlgimageoptions.o: moc/moc_qg_dlgimageoptions.cpp ui/qg_dlgimageoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgimageoptions.o moc/moc_qg_dlgimageoptions.cpp
-
-obj/moc_qg_dlgarc.o: moc/moc_qg_dlgarc.cpp ui/qg_dlgarc.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgarc.o moc/moc_qg_dlgarc.cpp
-
-obj/moc_qg_dlgcircle.o: moc/moc_qg_dlgcircle.cpp ui/qg_dlgcircle.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgcircle.o moc/moc_qg_dlgcircle.cpp
-
-obj/moc_qg_dlgdimension.o: moc/moc_qg_dlgdimension.cpp ui/qg_dlgdimension.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgdimension.o moc/moc_qg_dlgdimension.cpp
-
-obj/moc_qg_dlgdimlinear.o: moc/moc_qg_dlgdimlinear.cpp ui/qg_dlgdimlinear.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgdimlinear.o moc/moc_qg_dlgdimlinear.cpp
-
-obj/moc_qg_dlgline.o: moc/moc_qg_dlgline.cpp ui/qg_dlgline.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgline.o moc/moc_qg_dlgline.cpp
-
-obj/moc_qg_dlgellipse.o: moc/moc_qg_dlgellipse.cpp ui/qg_dlgellipse.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgellipse.o moc/moc_qg_dlgellipse.cpp
-
-obj/moc_qg_dlgmirror.o: moc/moc_qg_dlgmirror.cpp ui/qg_dlgmirror.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgmirror.o moc/moc_qg_dlgmirror.cpp
-
-obj/moc_qg_dlgmove.o: moc/moc_qg_dlgmove.cpp ui/qg_dlgmove.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgmove.o moc/moc_qg_dlgmove.cpp
-
-obj/moc_qg_dlgmoverotate.o: moc/moc_qg_dlgmoverotate.cpp ui/qg_dlgmoverotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgmoverotate.o moc/moc_qg_dlgmoverotate.cpp
-
-obj/moc_qg_dlgoptionsdrawing.o: moc/moc_qg_dlgoptionsdrawing.cpp ui/qg_dlgoptionsdrawing.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgoptionsdrawing.o moc/moc_qg_dlgoptionsdrawing.cpp
-
-obj/moc_qg_dlgoptionsgeneral.o: moc/moc_qg_dlgoptionsgeneral.cpp ui/qg_dlgoptionsgeneral.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgoptionsgeneral.o moc/moc_qg_dlgoptionsgeneral.cpp
-
-obj/moc_qg_dlgpoint.o: moc/moc_qg_dlgpoint.cpp ui/qg_dlgpoint.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgpoint.o moc/moc_qg_dlgpoint.cpp
-
-obj/moc_qg_dlgrotate.o: moc/moc_qg_dlgrotate.cpp ui/qg_dlgrotate.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgrotate.o moc/moc_qg_dlgrotate.cpp
-
-obj/moc_qg_dlgrotate2.o: moc/moc_qg_dlgrotate2.cpp ui/qg_dlgrotate2.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgrotate2.o moc/moc_qg_dlgrotate2.cpp
-
-obj/moc_qg_dlgscale.o: moc/moc_qg_dlgscale.cpp ui/qg_dlgscale.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgscale.o moc/moc_qg_dlgscale.cpp
-
-obj/moc_qg_dlgspline.o: moc/moc_qg_dlgspline.cpp ui/qg_dlgspline.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgspline.o moc/moc_qg_dlgspline.cpp
-
-obj/moc_qg_dlgtext.o: moc/moc_qg_dlgtext.cpp ui/qg_dlgtext.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_dlgtext.o moc/moc_qg_dlgtext.cpp
-
-obj/moc_qg_exitdialog.o: moc/moc_qg_exitdialog.cpp ui/qg_exitdialog.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_exitdialog.o moc/moc_qg_exitdialog.cpp
-
-obj/moc_qg_imageoptions.o: moc/moc_qg_imageoptions.cpp ui/qg_imageoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_imageoptions.o moc/moc_qg_imageoptions.cpp
-
-obj/moc_qg_insertoptions.o: moc/moc_qg_insertoptions.cpp ui/qg_insertoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_insertoptions.o moc/moc_qg_insertoptions.cpp
-
-obj/moc_qg_layerdialog.o: moc/moc_qg_layerdialog.cpp ui/qg_layerdialog.h ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_layerdialog.o moc/moc_qg_layerdialog.cpp
-
-obj/moc_qg_libraryinsertoptions.o: moc/moc_qg_libraryinsertoptions.cpp ui/qg_libraryinsertoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_libraryinsertoptions.o moc/moc_qg_libraryinsertoptions.cpp
-
-obj/moc_qg_librarywidget.o: moc/moc_qg_librarywidget.cpp ui/qg_librarywidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_librarywidget.o moc/moc_qg_librarywidget.cpp
-
-obj/moc_qg_lineangleoptions.o: moc/moc_qg_lineangleoptions.cpp ui/qg_lineangleoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_lineangleoptions.o moc/moc_qg_lineangleoptions.cpp
-
-obj/moc_qg_linebisectoroptions.o: moc/moc_qg_linebisectoroptions.cpp ui/qg_linebisectoroptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_linebisectoroptions.o moc/moc_qg_linebisectoroptions.cpp
-
-obj/moc_qg_lineoptions.o: moc/moc_qg_lineoptions.cpp ui/qg_lineoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_lineoptions.o moc/moc_qg_lineoptions.cpp
-
-obj/moc_qg_lineparalleloptions.o: moc/moc_qg_lineparalleloptions.cpp ui/qg_lineparalleloptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_lineparalleloptions.o moc/moc_qg_lineparalleloptions.cpp
-
-obj/moc_qg_lineparallelthroughoptions.o: moc/moc_qg_lineparallelthroughoptions.cpp ui/qg_lineparallelthroughoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_lineparallelthroughoptions.o moc/moc_qg_lineparallelthroughoptions.cpp
-
-obj/moc_qg_linepolygon2options.o: moc/moc_qg_linepolygon2options.cpp ui/qg_linepolygon2options.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_linepolygon2options.o moc/moc_qg_linepolygon2options.cpp
-
-obj/moc_qg_linepolygonoptions.o: moc/moc_qg_linepolygonoptions.cpp ui/qg_linepolygonoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_linepolygonoptions.o moc/moc_qg_linepolygonoptions.cpp
-
-obj/moc_qg_linerelangleoptions.o: moc/moc_qg_linerelangleoptions.cpp ui/qg_linerelangleoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_linerelangleoptions.o moc/moc_qg_linerelangleoptions.cpp
-
-obj/moc_qg_mousewidget.o: moc/moc_qg_mousewidget.cpp ui/qg_mousewidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_mousewidget.o moc/moc_qg_mousewidget.cpp
-
-obj/moc_qg_moverotateoptions.o: moc/moc_qg_moverotateoptions.cpp ui/qg_moverotateoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_moverotateoptions.o moc/moc_qg_moverotateoptions.cpp
-
-obj/moc_qg_printpreviewoptions.o: moc/moc_qg_printpreviewoptions.cpp ui/qg_printpreviewoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_printpreviewoptions.o moc/moc_qg_printpreviewoptions.cpp
-
-obj/moc_qg_roundoptions.o: moc/moc_qg_roundoptions.cpp ui/qg_roundoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_roundoptions.o moc/moc_qg_roundoptions.cpp
-
-obj/moc_qg_selectionwidget.o: moc/moc_qg_selectionwidget.cpp ui/qg_selectionwidget.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_selectionwidget.o moc/moc_qg_selectionwidget.cpp
-
-obj/moc_qg_snapdistoptions.o: moc/moc_qg_snapdistoptions.cpp ui/qg_snapdistoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_snapdistoptions.o moc/moc_qg_snapdistoptions.cpp
-
-obj/moc_qg_splineoptions.o: moc/moc_qg_splineoptions.cpp ui/qg_splineoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_splineoptions.o moc/moc_qg_splineoptions.cpp
-
-obj/moc_qg_textoptions.o: moc/moc_qg_textoptions.cpp ui/qg_textoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_textoptions.o moc/moc_qg_textoptions.cpp
-
-obj/moc_qg_trimamountoptions.o: moc/moc_qg_trimamountoptions.cpp ui/qg_trimamountoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_trimamountoptions.o moc/moc_qg_trimamountoptions.cpp
-
-obj/moc_qg_widgetpen.o: moc/moc_qg_widgetpen.cpp ui/qg_widgetpen.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_widgetpen.o moc/moc_qg_widgetpen.cpp
-
-obj/moc_qg_polylineoptions.o: moc/moc_qg_polylineoptions.cpp ui/qg_polylineoptions.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_qg_polylineoptions.o moc/moc_qg_polylineoptions.cpp
-
-moc/moc_qg_actionfactory.cpp: $(MOC) qg_actionfactory.h
- $(MOC) qg_actionfactory.h -o moc/moc_qg_actionfactory.cpp
-
-moc/moc_qg_actionhandler.cpp: $(MOC) qg_actionhandler.h
- $(MOC) qg_actionhandler.h -o moc/moc_qg_actionhandler.cpp
-
-moc/moc_qg_blockwidget.cpp: $(MOC) qg_blockwidget.h
- $(MOC) qg_blockwidget.h -o moc/moc_qg_blockwidget.cpp
-
-moc/moc_qg_colorbox.cpp: $(MOC) qg_colorbox.h
- $(MOC) qg_colorbox.h -o moc/moc_qg_colorbox.cpp
-
-moc/moc_qg_commandedit.cpp: $(MOC) qg_commandedit.h
- $(MOC) qg_commandedit.h -o moc/moc_qg_commandedit.cpp
-
-moc/moc_qg_fontbox.cpp: $(MOC) qg_fontbox.h
- $(MOC) qg_fontbox.h -o moc/moc_qg_fontbox.cpp
-
-moc/moc_qg_graphicview.cpp: $(MOC) qg_graphicview.h
- $(MOC) qg_graphicview.h -o moc/moc_qg_graphicview.cpp
-
-moc/moc_qg_layerbox.cpp: $(MOC) qg_layerbox.h
- $(MOC) qg_layerbox.h -o moc/moc_qg_layerbox.cpp
-
-moc/moc_qg_layerwidget.cpp: $(MOC) qg_layerwidget.h
- $(MOC) qg_layerwidget.h -o moc/moc_qg_layerwidget.cpp
-
-moc/moc_qg_linetypebox.cpp: $(MOC) qg_linetypebox.h
- $(MOC) qg_linetypebox.h -o moc/moc_qg_linetypebox.cpp
-
-moc/moc_qg_patternbox.cpp: $(MOC) qg_patternbox.h
- $(MOC) qg_patternbox.h -o moc/moc_qg_patternbox.cpp
-
-moc/moc_qg_pentoolbar.cpp: $(MOC) qg_pentoolbar.h
- $(MOC) qg_pentoolbar.h -o moc/moc_qg_pentoolbar.cpp
-
-moc/moc_qg_scrollbar.cpp: $(MOC) qg_scrollbar.h
- $(MOC) qg_scrollbar.h -o moc/moc_qg_scrollbar.cpp
-
-moc/moc_qg_widthbox.cpp: $(MOC) qg_widthbox.h
- $(MOC) qg_widthbox.h -o moc/moc_qg_widthbox.cpp
-
-moc/moc_qg_commandwidget.cpp: $(MOC) ui/qg_commandwidget.h
- $(MOC) ui/qg_commandwidget.h -o moc/moc_qg_commandwidget.cpp
-
-moc/moc_qg_arcoptions.cpp: $(MOC) ui/qg_arcoptions.h
- $(MOC) ui/qg_arcoptions.h -o moc/moc_qg_arcoptions.cpp
-
-moc/moc_qg_arctangentialoptions.cpp: $(MOC) ui/qg_arctangentialoptions.h
- $(MOC) ui/qg_arctangentialoptions.h -o moc/moc_qg_arctangentialoptions.cpp
-
-moc/moc_qg_beveloptions.cpp: $(MOC) ui/qg_beveloptions.h
- $(MOC) ui/qg_beveloptions.h -o moc/moc_qg_beveloptions.cpp
-
-moc/moc_qg_blockdialog.cpp: $(MOC) ui/qg_blockdialog.h
- $(MOC) ui/qg_blockdialog.h -o moc/moc_qg_blockdialog.cpp
-
-moc/moc_qg_cadtoolbar.cpp: $(MOC) ui/qg_cadtoolbar.h
- $(MOC) ui/qg_cadtoolbar.h -o moc/moc_qg_cadtoolbar.cpp
-
-moc/moc_qg_cadtoolbararcs.cpp: $(MOC) ui/qg_cadtoolbararcs.h
- $(MOC) ui/qg_cadtoolbararcs.h -o moc/moc_qg_cadtoolbararcs.cpp
-
-moc/moc_qg_cadtoolbarcircles.cpp: $(MOC) ui/qg_cadtoolbarcircles.h
- $(MOC) ui/qg_cadtoolbarcircles.h -o moc/moc_qg_cadtoolbarcircles.cpp
-
-moc/moc_qg_cadtoolbardim.cpp: $(MOC) ui/qg_cadtoolbardim.h
- $(MOC) ui/qg_cadtoolbardim.h -o moc/moc_qg_cadtoolbardim.cpp
-
-moc/moc_qg_cadtoolbarellipses.cpp: $(MOC) ui/qg_cadtoolbarellipses.h
- $(MOC) ui/qg_cadtoolbarellipses.h -o moc/moc_qg_cadtoolbarellipses.cpp
-
-moc/moc_qg_cadtoolbarinfo.cpp: $(MOC) ui/qg_cadtoolbarinfo.h
- $(MOC) ui/qg_cadtoolbarinfo.h -o moc/moc_qg_cadtoolbarinfo.cpp
-
-moc/moc_qg_cadtoolbarlines.cpp: $(MOC) ui/qg_cadtoolbarlines.h
- $(MOC) ui/qg_cadtoolbarlines.h -o moc/moc_qg_cadtoolbarlines.cpp
-
-moc/moc_qg_cadtoolbarmain.cpp: $(MOC) ui/qg_cadtoolbarmain.h
- $(MOC) ui/qg_cadtoolbarmain.h -o moc/moc_qg_cadtoolbarmain.cpp
-
-moc/moc_qg_cadtoolbarmodify.cpp: $(MOC) ui/qg_cadtoolbarmodify.h
- $(MOC) ui/qg_cadtoolbarmodify.h -o moc/moc_qg_cadtoolbarmodify.cpp
-
-moc/moc_qg_cadtoolbarpoints.cpp: $(MOC) ui/qg_cadtoolbarpoints.h
- $(MOC) ui/qg_cadtoolbarpoints.h -o moc/moc_qg_cadtoolbarpoints.cpp
-
-moc/moc_qg_cadtoolbarpolylines.cpp: $(MOC) ui/qg_cadtoolbarpolylines.h
- $(MOC) ui/qg_cadtoolbarpolylines.h -o moc/moc_qg_cadtoolbarpolylines.cpp
-
-moc/moc_qg_cadtoolbarselect.cpp: $(MOC) ui/qg_cadtoolbarselect.h
- $(MOC) ui/qg_cadtoolbarselect.h -o moc/moc_qg_cadtoolbarselect.cpp
-
-moc/moc_qg_cadtoolbarsnap.cpp: $(MOC) ui/qg_cadtoolbarsnap.h
- $(MOC) ui/qg_cadtoolbarsnap.h -o moc/moc_qg_cadtoolbarsnap.cpp
-
-moc/moc_qg_cadtoolbarsplines.cpp: $(MOC) ui/qg_cadtoolbarsplines.h
- $(MOC) ui/qg_cadtoolbarsplines.h -o moc/moc_qg_cadtoolbarsplines.cpp
-
-moc/moc_qg_circleoptions.cpp: $(MOC) ui/qg_circleoptions.h
- $(MOC) ui/qg_circleoptions.h -o moc/moc_qg_circleoptions.cpp
-
-moc/moc_qg_coordinatewidget.cpp: $(MOC) ui/qg_coordinatewidget.h
- $(MOC) ui/qg_coordinatewidget.h -o moc/moc_qg_coordinatewidget.cpp
-
-moc/moc_qg_dimensionlabeleditor.cpp: $(MOC) ui/qg_dimensionlabeleditor.h
- $(MOC) ui/qg_dimensionlabeleditor.h -o moc/moc_qg_dimensionlabeleditor.cpp
-
-moc/moc_qg_dimlinearoptions.cpp: $(MOC) ui/qg_dimlinearoptions.h
- $(MOC) ui/qg_dimlinearoptions.h -o moc/moc_qg_dimlinearoptions.cpp
-
-moc/moc_qg_dimoptions.cpp: $(MOC) ui/qg_dimoptions.h
- $(MOC) ui/qg_dimoptions.h -o moc/moc_qg_dimoptions.cpp
-
-moc/moc_qg_dlgattributes.cpp: $(MOC) ui/qg_dlgattributes.h
- $(MOC) ui/qg_dlgattributes.h -o moc/moc_qg_dlgattributes.cpp
-
-moc/moc_qg_dlghatch.cpp: $(MOC) ui/qg_dlghatch.h
- $(MOC) ui/qg_dlghatch.h -o moc/moc_qg_dlghatch.cpp
-
-moc/moc_qg_dlginitial.cpp: $(MOC) ui/qg_dlginitial.h
- $(MOC) ui/qg_dlginitial.h -o moc/moc_qg_dlginitial.cpp
-
-moc/moc_qg_dlginsert.cpp: $(MOC) ui/qg_dlginsert.h
- $(MOC) ui/qg_dlginsert.h -o moc/moc_qg_dlginsert.cpp
-
-moc/moc_qg_dlgimageoptions.cpp: $(MOC) ui/qg_dlgimageoptions.h
- $(MOC) ui/qg_dlgimageoptions.h -o moc/moc_qg_dlgimageoptions.cpp
-
-moc/moc_qg_dlgarc.cpp: $(MOC) ui/qg_dlgarc.h
- $(MOC) ui/qg_dlgarc.h -o moc/moc_qg_dlgarc.cpp
-
-moc/moc_qg_dlgcircle.cpp: $(MOC) ui/qg_dlgcircle.h
- $(MOC) ui/qg_dlgcircle.h -o moc/moc_qg_dlgcircle.cpp
-
-moc/moc_qg_dlgdimension.cpp: $(MOC) ui/qg_dlgdimension.h
- $(MOC) ui/qg_dlgdimension.h -o moc/moc_qg_dlgdimension.cpp
-
-moc/moc_qg_dlgdimlinear.cpp: $(MOC) ui/qg_dlgdimlinear.h
- $(MOC) ui/qg_dlgdimlinear.h -o moc/moc_qg_dlgdimlinear.cpp
-
-moc/moc_qg_dlgline.cpp: $(MOC) ui/qg_dlgline.h
- $(MOC) ui/qg_dlgline.h -o moc/moc_qg_dlgline.cpp
-
-moc/moc_qg_dlgellipse.cpp: $(MOC) ui/qg_dlgellipse.h
- $(MOC) ui/qg_dlgellipse.h -o moc/moc_qg_dlgellipse.cpp
-
-moc/moc_qg_dlgmirror.cpp: $(MOC) ui/qg_dlgmirror.h
- $(MOC) ui/qg_dlgmirror.h -o moc/moc_qg_dlgmirror.cpp
-
-moc/moc_qg_dlgmove.cpp: $(MOC) ui/qg_dlgmove.h
- $(MOC) ui/qg_dlgmove.h -o moc/moc_qg_dlgmove.cpp
-
-moc/moc_qg_dlgmoverotate.cpp: $(MOC) ui/qg_dlgmoverotate.h
- $(MOC) ui/qg_dlgmoverotate.h -o moc/moc_qg_dlgmoverotate.cpp
-
-moc/moc_qg_dlgoptionsdrawing.cpp: $(MOC) ui/qg_dlgoptionsdrawing.h
- $(MOC) ui/qg_dlgoptionsdrawing.h -o moc/moc_qg_dlgoptionsdrawing.cpp
-
-moc/moc_qg_dlgoptionsgeneral.cpp: $(MOC) ui/qg_dlgoptionsgeneral.h
- $(MOC) ui/qg_dlgoptionsgeneral.h -o moc/moc_qg_dlgoptionsgeneral.cpp
-
-moc/moc_qg_dlgpoint.cpp: $(MOC) ui/qg_dlgpoint.h
- $(MOC) ui/qg_dlgpoint.h -o moc/moc_qg_dlgpoint.cpp
-
-moc/moc_qg_dlgrotate.cpp: $(MOC) ui/qg_dlgrotate.h
- $(MOC) ui/qg_dlgrotate.h -o moc/moc_qg_dlgrotate.cpp
-
-moc/moc_qg_dlgrotate2.cpp: $(MOC) ui/qg_dlgrotate2.h
- $(MOC) ui/qg_dlgrotate2.h -o moc/moc_qg_dlgrotate2.cpp
-
-moc/moc_qg_dlgscale.cpp: $(MOC) ui/qg_dlgscale.h
- $(MOC) ui/qg_dlgscale.h -o moc/moc_qg_dlgscale.cpp
-
-moc/moc_qg_dlgspline.cpp: $(MOC) ui/qg_dlgspline.h
- $(MOC) ui/qg_dlgspline.h -o moc/moc_qg_dlgspline.cpp
-
-moc/moc_qg_dlgtext.cpp: $(MOC) ui/qg_dlgtext.h
- $(MOC) ui/qg_dlgtext.h -o moc/moc_qg_dlgtext.cpp
-
-moc/moc_qg_exitdialog.cpp: $(MOC) ui/qg_exitdialog.h
- $(MOC) ui/qg_exitdialog.h -o moc/moc_qg_exitdialog.cpp
-
-moc/moc_qg_imageoptions.cpp: $(MOC) ui/qg_imageoptions.h
- $(MOC) ui/qg_imageoptions.h -o moc/moc_qg_imageoptions.cpp
-
-moc/moc_qg_insertoptions.cpp: $(MOC) ui/qg_insertoptions.h
- $(MOC) ui/qg_insertoptions.h -o moc/moc_qg_insertoptions.cpp
-
-moc/moc_qg_layerdialog.cpp: $(MOC) ui/qg_layerdialog.h
- $(MOC) ui/qg_layerdialog.h -o moc/moc_qg_layerdialog.cpp
-
-moc/moc_qg_libraryinsertoptions.cpp: $(MOC) ui/qg_libraryinsertoptions.h
- $(MOC) ui/qg_libraryinsertoptions.h -o moc/moc_qg_libraryinsertoptions.cpp
-
-moc/moc_qg_librarywidget.cpp: $(MOC) ui/qg_librarywidget.h
- $(MOC) ui/qg_librarywidget.h -o moc/moc_qg_librarywidget.cpp
-
-moc/moc_qg_lineangleoptions.cpp: $(MOC) ui/qg_lineangleoptions.h
- $(MOC) ui/qg_lineangleoptions.h -o moc/moc_qg_lineangleoptions.cpp
-
-moc/moc_qg_linebisectoroptions.cpp: $(MOC) ui/qg_linebisectoroptions.h
- $(MOC) ui/qg_linebisectoroptions.h -o moc/moc_qg_linebisectoroptions.cpp
-
-moc/moc_qg_lineoptions.cpp: $(MOC) ui/qg_lineoptions.h
- $(MOC) ui/qg_lineoptions.h -o moc/moc_qg_lineoptions.cpp
-
-moc/moc_qg_lineparalleloptions.cpp: $(MOC) ui/qg_lineparalleloptions.h
- $(MOC) ui/qg_lineparalleloptions.h -o moc/moc_qg_lineparalleloptions.cpp
-
-moc/moc_qg_lineparallelthroughoptions.cpp: $(MOC) ui/qg_lineparallelthroughoptions.h
- $(MOC) ui/qg_lineparallelthroughoptions.h -o moc/moc_qg_lineparallelthroughoptions.cpp
-
-moc/moc_qg_linepolygon2options.cpp: $(MOC) ui/qg_linepolygon2options.h
- $(MOC) ui/qg_linepolygon2options.h -o moc/moc_qg_linepolygon2options.cpp
-
-moc/moc_qg_linepolygonoptions.cpp: $(MOC) ui/qg_linepolygonoptions.h
- $(MOC) ui/qg_linepolygonoptions.h -o moc/moc_qg_linepolygonoptions.cpp
-
-moc/moc_qg_linerelangleoptions.cpp: $(MOC) ui/qg_linerelangleoptions.h
- $(MOC) ui/qg_linerelangleoptions.h -o moc/moc_qg_linerelangleoptions.cpp
-
-moc/moc_qg_mousewidget.cpp: $(MOC) ui/qg_mousewidget.h
- $(MOC) ui/qg_mousewidget.h -o moc/moc_qg_mousewidget.cpp
-
-moc/moc_qg_moverotateoptions.cpp: $(MOC) ui/qg_moverotateoptions.h
- $(MOC) ui/qg_moverotateoptions.h -o moc/moc_qg_moverotateoptions.cpp
-
-moc/moc_qg_printpreviewoptions.cpp: $(MOC) ui/qg_printpreviewoptions.h
- $(MOC) ui/qg_printpreviewoptions.h -o moc/moc_qg_printpreviewoptions.cpp
-
-moc/moc_qg_roundoptions.cpp: $(MOC) ui/qg_roundoptions.h
- $(MOC) ui/qg_roundoptions.h -o moc/moc_qg_roundoptions.cpp
-
-moc/moc_qg_selectionwidget.cpp: $(MOC) ui/qg_selectionwidget.h
- $(MOC) ui/qg_selectionwidget.h -o moc/moc_qg_selectionwidget.cpp
-
-moc/moc_qg_snapdistoptions.cpp: $(MOC) ui/qg_snapdistoptions.h
- $(MOC) ui/qg_snapdistoptions.h -o moc/moc_qg_snapdistoptions.cpp
-
-moc/moc_qg_splineoptions.cpp: $(MOC) ui/qg_splineoptions.h
- $(MOC) ui/qg_splineoptions.h -o moc/moc_qg_splineoptions.cpp
-
-moc/moc_qg_textoptions.cpp: $(MOC) ui/qg_textoptions.h
- $(MOC) ui/qg_textoptions.h -o moc/moc_qg_textoptions.cpp
-
-moc/moc_qg_trimamountoptions.cpp: $(MOC) ui/qg_trimamountoptions.h
- $(MOC) ui/qg_trimamountoptions.h -o moc/moc_qg_trimamountoptions.cpp
-
-moc/moc_qg_widgetpen.cpp: $(MOC) ui/qg_widgetpen.h
- $(MOC) ui/qg_widgetpen.h -o moc/moc_qg_widgetpen.cpp
-
-moc/moc_qg_polylineoptions.cpp: $(MOC) ui/qg_polylineoptions.h
- $(MOC) ui/qg_polylineoptions.h -o moc/moc_qg_polylineoptions.cpp
-
-####### Install
-
-install:
-
-uninstall:
-
diff --git a/qcadguiqt/src/ui/qg_polylineoptions.ui.h~ b/qcadguiqt/src/ui/qg_polylineoptions.ui.h~
deleted file mode 100644
index 8eabccf..0000000
--- a/qcadguiqt/src/ui/qg_polylineoptions.ui.h~
+++ /dev/null
@@ -1,140 +0,0 @@
-/****************************************************************************
-** ui.h extension file, included from the uic-generated form implementation.
-**
-** If you wish to add, delete or rename functions or slots use
-** Qt Designer which will update this file, preserving your code. Create an
-** init() function in place of a constructor, and a destroy() function in
-** place of a destructor.
-*****************************************************************************/
-
-void QG_PolylineOptions::destroy() {
- RS_SETTINGS->beginGroup("/Draw");
- RS_SETTINGS->writeEntry("/PolylineMode",cbMode->currentItem());
- RS_SETTINGS->writeEntry("/PolylineRadius", leRadius->text());
- RS_SETTINGS->writeEntry("/PolylineAngle", leAngle->text());
- RS_SETTINGS->endGroup();
-}
-
-void QG_PolylineOptions::setAction(RS_ActionInterface* a, bool update) {
- if (a!=NULL && a->rtti()==RS2::ActionDrawPolyline) {
- action = (RS_ActionDrawPolyline*)a;
-
- QString sd1;
- QString sd2;
- QString sr;
- if (update) {
- sd1 = QString("%1").arg(action->getRadius());
- sd2 = QString("%1").arg(action->getAngle());
- sr = QString("%1").arg(action->getMode());
- } else {
- RS_SETTINGS->beginGroup("/Draw");
- sd1 = RS_SETTINGS->readEntry("/PolylineRadius", "1.0");
- sd2 = RS_SETTINGS->readEntry("/PolylineAngle", "1.0");
- sr = RS_SETTINGS->readEntry("/PolylineMode","0");
- RS_SETTINGS->endGroup();
- action->setRadius(sd1.toDouble());
- action->setAngle(sd2.toDouble());
- action->setMode(sr.toInt());
- }
- leRadius->setText(sd1);
- leAngle->setText(sd2);
- cbMode->setCurrentItem(sr.toInt());
- } else {
- std::cerr << "QG_PolylineOptions::setAction: wrong action type\n";
- action = NULL;
- }
-}
-
-void QG_PolylineOptions::close() {
- if (action!=NULL) {
- action->close();
- }
-}
-
-void QG_PolylineOptions::undo() {
- if (action!=NULL) {
- action->undo();
- }
-}
-
-void QG_PolylineOptions::updateRadius(const QString& s) {
- if (action!=NULL) {
- action->setRadius(RS_Math::eval(s));
- }
-}
-
-void QG_PolylineOptions::updateAngle(const QString& s) {
- if (action!=NULL) {
- double a=RS_Math::eval(s);
-// QString sr;
- if (a>360.0) {
- a=360.0;
- leAngle->setText(QString("%1").arg(a));
- }
- else if (a<-0.0) {
- a=0.0;
- leAngle->setText(QString("%1").arg(a));
- }
- if (rbNeg->isChecked ())
- action->setAngle(-a);
- else
- action->setAngle(a);
- }
-}
-
-void QG_ArcOptions::updateDirection(bool /*pos*/) {
- if (action!=NULL) {
- action->setReversed(!(rbPos->isChecked()));
- }
-}
-
-void QG_PolylineOptions::updateMode( int m )
-{
- enum Mode {
- Line,
- Tangential,
- TanRad,
- TanAng,
- TanRadAng,
- Ang,
- RadAngEndp,
- RadAngCenp
- };
-
- if (action!=NULL) {
- action->setMode(m);
- }
- switch(m) {
- case Line:
- case Tangential:
- leRadius->setDisabled(true);
- leAngle->setDisabled(true);
- lRadius->setDisabled(true);
- lAngle->setDisabled(true);
- buttonGroup1->setDisabled(true);
- break;
- case TanRad:
- leRadius->setDisabled(false);
- leAngle->setDisabled(true);
- lRadius->setDisabled(false);
- lAngle->setDisabled(true);
- buttonGroup1->setDisabled(true);
- break;
- case TanAng:
- case Ang:
- leRadius->setDisabled(true);
- leAngle->setDisabled(false);
- lRadius->setDisabled(true);
- lAngle->setDisabled(false);
- buttonGroup1->setDisabled(false);
- break;
- case TanRadAng:
- case RadAngEndp:
- case RadAngCenp:
- leRadius->setDisabled(false);
- leAngle->setDisabled(false);
- lRadius->setDisabled(false);
- lAngle->setDisabled(false);
- buttonGroup1->setDisabled(false);
- }
-}
diff --git a/qcadguiqt/src/ui/qg_polylineoptions.ui~ b/qcadguiqt/src/ui/qg_polylineoptions.ui~
deleted file mode 100644
index 8116167..0000000
--- a/qcadguiqt/src/ui/qg_polylineoptions.ui~
+++ /dev/null
@@ -1,292 +0,0 @@
-<!DOCTYPE UI><UI version="3.3" stdsetdef="1">
-<class>QG_PolylineOptions</class>
-<widget class="QWidget">
- <property name="name">
- <cstring>QG_PolylineOptions</cstring>
- </property>
- <property name="geometry">
- <rect>
- <x>0</x>
- <y>0</y>
- <width>650</width>
- <height>22</height>
- </rect>
- </property>
- <property name="sizePolicy">
- <sizepolicy>
- <hsizetype>4</hsizetype>
- <vsizetype>5</vsizetype>
- <horstretch>0</horstretch>
- <verstretch>0</verstretch>
- </sizepolicy>
- </property>
- <property name="minimumSize">
- <size>
- <width>650</width>
- <height>22</height>
- </size>
- </property>
- <property name="maximumSize">
- <size>
- <width>650</width>
- <height>22</height>
- </size>
- </property>
- <property name="caption">
- <string>Polyline Options</string>
- </property>
- <hbox>
- <property name="name">
- <cstring>unnamed</cstring>
- </property>
- <property name="margin">
- <number>1</number>
- </property>
- <widget class="QToolButton">
- <property name="name">
- <cstring>bClose</cstring>
- </property>
- <property name="text">
- <string>Close</string>
- </property>
- </widget>
- <widget class="QToolButton">
- <property name="name">
- <cstring>bUndo</cstring>
- </property>
- <property name="text">
- <string>Undo</string>
- </property>
- </widget>
- <widget class="QComboBox">
- <item>
- <property name="text">
- <string>Line</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Tangential</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Tan Radius</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Tan Angle</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Tan Rad + Angle</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Angle</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Rad + Ang End</string>
- </property>
- </item>
- <item>
- <property name="text">
- <string>Rad + Ang Center</string>
- </property>
- </item>
- <property name="name">
- <cstring>cbMode</cstring>
- </property>
- <property name="sizePolicy">
- <sizepolicy>
- <hsizetype>1</hsizetype>
- <vsizetype>0</vsizetype>
- <horstretch>0</horstretch>
- <verstretch>0</verstretch>
- </sizepolicy>
- </property>
- </widget>
- <widget class="QLabel">
- <property name="name">
- <cstring>lRadius</cstring>
- </property>
- <property name="text">
- <string>Radius:</string>
- </property>
- <property name="alignment">
- <set>AlignVCenter</set>
- </property>
- </widget>
- <widget class="QLineEdit">
- <property name="name">
- <cstring>leRadius</cstring>
- </property>
- </widget>
- <widget class="QLabel">
- <property name="name">
- <cstring>lAngle</cstring>
- </property>
- <property name="text">
- <string>Angle:</string>
- </property>
- <property name="alignment">
- <set>AlignVCenter</set>
- </property>
- </widget>
- <widget class="QLineEdit">
- <property name="name">
- <cstring>leAngle</cstring>
- </property>
- </widget>
- <widget class="QButtonGroup">
- <property name="name">
- <cstring>buttonGroup1</cstring>
- </property>
- <property name="lineWidth">
- <number>0</number>
- </property>
- <property name="title">
- <string></string>
- </property>
- <property name="flat">
- <bool>true</bool>
- </property>
- <widget class="QRadioButton">
- <property name="name">
- <cstring>rbNeg</cstring>
- </property>
- <property name="geometry">
- <rect>
- <x>38</x>
- <y>2</y>
- <width>36</width>
- <height>19</height>
- </rect>
- </property>
- <property name="text">
- <string></string>
- </property>
- <property name="pixmap">
- <pixmap>image0</pixmap>
- </property>
- <property name="toolTip" stdset="0">
- <string>Clockwise</string>
- </property>
- </widget>
- <widget class="QRadioButton">
- <property name="name">
- <cstring>rbPos</cstring>
- </property>
- <property name="geometry">
- <rect>
- <x>2</x>
- <y>2</y>
- <width>36</width>
- <height>19</height>
- </rect>
- </property>
- <property name="text">
- <string></string>
- </property>
- <property name="pixmap">
- <pixmap>image1</pixmap>
- </property>
- <property name="checked">
- <bool>true</bool>
- </property>
- <property name="toolTip" stdset="0">
- <string>Counter Clockwise</string>
- </property>
- </widget>
- </widget>
- <widget class="Line">
- <property name="name">
- <cstring>sep1</cstring>
- </property>
- <property name="sizePolicy">
- <sizepolicy>
- <hsizetype>0</hsizetype>
- <vsizetype>1</vsizetype>
- <horstretch>0</horstretch>
- <verstretch>0</verstretch>
- </sizepolicy>
- </property>
- <property name="frameShape">
- <enum>VLine</enum>
- </property>
- <property name="frameShadow">
- <enum>Sunken</enum>
- </property>
- <property name="orientation">
- <enum>Vertical</enum>
- </property>
- </widget>
- </hbox>
-</widget>
-<images>
- <image name="image0">
- <data format="PNG" length="172">89504e470d0a1a0a0000000d494844520000000e0000000f0806000000d414fe7400000073494441542891bd93510ac0200c4353f152e6fe64c7721fc321a562ddc7f259fad216a349c2a91ad9ab2f92ec51b3241b1000540f8d86c870762c190800fc1a2503b5607d03700c01eec648d7c2b444c58cfe0549f6ef1325d92a2dab6992ac004f9c32f0fcdeefaa3bd887c4fcefd8857ce80672d24274c76563db0000000049454e44ae426082</data>
- </image>
- <image name="image1">
- <data format="PNG" length="164">89504e470d0a1a0a0000000d494844520000000e0000000f0806000000d414fe740000006b494441542891bd924b0e80200c44a78d97a2f7cf782c5c61c8584275e1db11fad2af91c44c44742490b4f97da8a401ab3faf4823e35c8d57a44c36002549cbf67d58ce2791a4fd9b11903d66b4c541b8ee4739171377e0b9dc8a7cf7b893d5b4b7473e7a7e88155a44bf0011fe441424295e9a0000000049454e44ae426082</data>
- </image>
-</images>
-<connections>
- <connection>
- <sender>bClose</sender>
- <signal>clicked()</signal>
- <receiver>QG_PolylineOptions</receiver>
- <slot>close()</slot>
- </connection>
- <connection>
- <sender>bUndo</sender>
- <signal>clicked()</signal>
- <receiver>QG_PolylineOptions</receiver>
- <slot>undo()</slot>
- </connection>
- <connection>
- <sender>leRadius</sender>
- <signal>textChanged(const QString&)</signal>
- <receiver>QG_PolylineOptions</receiver>
- <slot>updateRadius(const QString&)</slot>
- </connection>
- <connection>
- <sender>leAngle</sender>
- <signal>textChanged(const QString&)</signal>
- <receiver>QG_PolylineOptions</receiver>
- <slot>updateAngle(const QString&)</slot>
- </connection>
- <connection>
- <sender>cbMode</sender>
- <signal>activated(int)</signal>
- <receiver>QG_PolylineOptions</receiver>
- <slot>updateMode(int)</slot>
- </connection>
-</connections>
-<includes>
- <include location="local" impldecl="in declaration">rs_line.h</include>
- <include location="local" impldecl="in declaration">rs_settings.h</include>
- <include location="local" impldecl="in declaration">rs_actiondrawpolyline.h</include>
- <include location="local" impldecl="in implementation">qg_polylineoptions.ui.h</include>
-</includes>
-<variables>
- <variable>RS_ActionDrawPolyline* action;</variable>
-</variables>
-<slots>
- <slot>setAction( RS_ActionInterface * a, bool update )</slot>
- <slot>close()</slot>
- <slot>undo()</slot>
- <slot>updateRadius( const QString & s )</slot>
- <slot>updateAngle( const QString & s )</slot>
- <slot>updateMode( int m )</slot>
-</slots>
-<functions>
- <function access="private" specifier="non virtual">destroy()</function>
-</functions>
-<layoutdefaults spacing="6" margin="11"/>
-</UI>
diff --git a/qcadlib/src/Makefile b/qcadlib/src/Makefile
deleted file mode 100644
index f5926df..0000000
--- a/qcadlib/src/Makefile
+++ /dev/null
@@ -1,1524 +0,0 @@
-#############################################################################
-# Makefile for building: libqcad.a
-# Generated by qmake (1.07a) (Qt 3.3.8b) on: Wed Mar 18 19:30:10 2009
-# Project: qcadlib.pro
-# Template: lib
-# Command: $(QMAKE) -o Makefile qcadlib.pro
-#############################################################################
-
-####### Compiler, tools and options
-
-CC = gcc
-CXX = g++
-LEX = flex
-YACC = yacc
-CFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DRS_NO_COMPLEX_ENTITIES -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-CXXFLAGS = -pipe -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -Wno-long-long -Wall -W -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DUSE_LIB64_PATHES -fno-strict-aliasing -DRS_NO_COMPLEX_ENTITIES -DQT_NO_DEBUG -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT
-LEXFLAGS =
-YACCFLAGS= -d
-INCPATH = -I/usr/lib64/qt3/mkspecs/default -I. -I../include -I../../dxflib/include -I../../fparser/include -I../../qcadcmd/include -I/usr/include -I$(QTDIR)/include -Imoc/
-AR = ar cqs
-RANLIB =
-MOC = $(QTDIR)/bin/moc
-UIC = $(QTDIR)/bin/uic
-QMAKE = qmake
-TAR = tar -cf
-GZIP = gzip -9f
-COPY = cp -f
-COPY_FILE= $(COPY)
-COPY_DIR = $(COPY) -r
-INSTALL_FILE= $(COPY_FILE)
-INSTALL_DIR = $(COPY_DIR)
-DEL_FILE = rm -f
-SYMLINK = ln -sf
-DEL_DIR = rmdir
-MOVE = mv -f
-CHK_DIR_EXISTS= test -d
-MKDIR = mkdir -p
-
-####### Output directory
-
-OBJECTS_DIR = obj/
-
-####### Files
-
-HEADERS = actions/rs_actioninterface.h \
- actions/rs_preview.h \
- actions/rs_previewactioninterface.h \
- actions/rs_snapper.h \
- creation/rs_creation.h \
- debug/rs_debug.h \
- engine/rs.h \
- engine/rs_application.h \
- engine/rs_arc.h \
- engine/rs_atomicentity.h \
- engine/rs_block.h \
- engine/rs_blocklist.h \
- engine/rs_blocklistlistener.h \
- engine/rs_clipboard.h \
- engine/rs_circle.h \
- engine/rs_color.h \
- engine/rs_constructionline.h \
- engine/rs_datetime.h \
- engine/rs_dimaligned.h \
- engine/rs_dimangular.h \
- engine/rs_dimdiametric.h \
- engine/rs_dimension.h \
- engine/rs_dimlinear.h \
- engine/rs_dimradial.h \
- engine/rs_dir.h \
- engine/rs_document.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_entitycontainer.h \
- engine/rs_file.h \
- engine/rs_fileinfo.h \
- engine/rs_flags.h \
- engine/rs_font.h \
- engine/rs_fontchar.h \
- engine/rs_fontlist.h \
- engine/rs_graphic.h \
- engine/rs_hatch.h \
- engine/rs_insert.h \
- engine/rs_img.h \
- engine/rs_image.h \
- engine/rs_layer.h \
- engine/rs_layerlist.h \
- engine/rs_layerlistlistener.h \
- engine/rs_leader.h \
- engine/rs_line.h \
- engine/rs_pattern.h \
- engine/rs_patternlist.h \
- engine/rs_pen.h \
- engine/rs_point.h \
- engine/rs_polyline.h \
- engine/rs_ptrlist.h \
- engine/rs_regexp.h \
- engine/rs_settings.h \
- engine/rs_solid.h \
- engine/rs_spline.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_system.h \
- engine/rs_text.h \
- engine/rs_textstream.h \
- engine/rs_undo.h \
- engine/rs_undoable.h \
- engine/rs_undocycle.h \
- engine/rs_units.h \
- engine/rs_utility.h \
- engine/rs_valuelist.h \
- engine/rs_variabledict.h \
- engine/rs_vector.h \
- fileio/rs_fileio.h \
- filters/rs_filtercxf.h \
- filters/rs_filterdxf.h \
- filters/rs_filterdxf1.h \
- filters/rs_filterinterface.h \
- gui/rs_commandevent.h \
- gui/rs_coordinateevent.h \
- gui/rs_dialogfactory.h \
- gui/rs_dialogfactoryinterface.h \
- gui/rs_dialogfactoryadapter.h \
- gui/rs_event.h \
- gui/rs_eventhandler.h \
- gui/rs_graphicview.h \
- gui/rs_grid.h \
- gui/rs_keyevent.h \
- gui/rs_linetypepattern.h \
- gui/rs_mainwindowinterface.h \
- gui/rs_mouseevent.h \
- gui/rs_painter.h \
- gui/rs_painteradapter.h \
- gui/rs_painterqt.h \
- gui/rs_staticgraphicview.h \
- information/rs_information.h \
- information/rs_infoarea.h \
- modification/rs_modification.h \
- modification/rs_selection.h \
- math/rs_math.h \
- scripting/rs_python.h \
- scripting/rs_simplepython.h \
- scripting/rs_python_wrappers.h \
- scripting/rs_script.h \
- scripting/rs_scriptlist.h
-SOURCES = actions/rs_actioninterface.cpp \
- actions/rs_preview.cpp \
- actions/rs_previewactioninterface.cpp \
- actions/rs_snapper.cpp \
- creation/rs_creation.cpp \
- debug/rs_debug.cpp \
- engine/rs_arc.cpp \
- engine/rs_block.cpp \
- engine/rs_blocklist.cpp \
- engine/rs_clipboard.cpp \
- engine/rs_circle.cpp \
- engine/rs_constructionline.cpp \
- engine/rs_dimaligned.cpp \
- engine/rs_dimangular.cpp \
- engine/rs_dimdiametric.cpp \
- engine/rs_dimension.cpp \
- engine/rs_dimlinear.cpp \
- engine/rs_dimradial.cpp \
- engine/rs_document.cpp \
- engine/rs_ellipse.cpp \
- engine/rs_entity.cpp \
- engine/rs_entitycontainer.cpp \
- engine/rs_font.cpp \
- engine/rs_fontlist.cpp \
- engine/rs_graphic.cpp \
- engine/rs_hatch.cpp \
- engine/rs_insert.cpp \
- engine/rs_image.cpp \
- engine/rs_layer.cpp \
- engine/rs_layerlist.cpp \
- engine/rs_leader.cpp \
- engine/rs_line.cpp \
- engine/rs_pattern.cpp \
- engine/rs_patternlist.cpp \
- engine/rs_point.cpp \
- engine/rs_polyline.cpp \
- engine/rs_settings.cpp \
- engine/rs_solid.cpp \
- engine/rs_spline.cpp \
- engine/rs_string.cpp \
- engine/rs_system.cpp \
- engine/rs_text.cpp \
- engine/rs_undo.cpp \
- engine/rs_undoable.cpp \
- engine/rs_units.cpp \
- engine/rs_utility.cpp \
- engine/rs_variabledict.cpp \
- engine/rs_vector.cpp \
- fileio/rs_fileio.cpp \
- filters/rs_filtercxf.cpp \
- filters/rs_filterdxf.cpp \
- filters/rs_filterdxf1.cpp \
- gui/rs_dialogfactory.cpp \
- gui/rs_eventhandler.cpp \
- gui/rs_graphicview.cpp \
- gui/rs_grid.cpp \
- gui/rs_linetypepattern.cpp \
- gui/rs_painter.cpp \
- gui/rs_painterqt.cpp \
- gui/rs_staticgraphicview.cpp \
- information/rs_information.cpp \
- information/rs_infoarea.cpp \
- math/rs_math.cpp \
- modification/rs_modification.cpp \
- modification/rs_selection.cpp \
- scripting/rs_python.cpp \
- scripting/rs_simplepython.cpp \
- scripting/rs_python_wrappers.cpp \
- scripting/rs_script.cpp \
- scripting/rs_scriptlist.cpp
-OBJECTS = obj/rs_actioninterface.o \
- obj/rs_preview.o \
- obj/rs_previewactioninterface.o \
- obj/rs_snapper.o \
- obj/rs_creation.o \
- obj/rs_debug.o \
- obj/rs_arc.o \
- obj/rs_block.o \
- obj/rs_blocklist.o \
- obj/rs_clipboard.o \
- obj/rs_circle.o \
- obj/rs_constructionline.o \
- obj/rs_dimaligned.o \
- obj/rs_dimangular.o \
- obj/rs_dimdiametric.o \
- obj/rs_dimension.o \
- obj/rs_dimlinear.o \
- obj/rs_dimradial.o \
- obj/rs_document.o \
- obj/rs_ellipse.o \
- obj/rs_entity.o \
- obj/rs_entitycontainer.o \
- obj/rs_font.o \
- obj/rs_fontlist.o \
- obj/rs_graphic.o \
- obj/rs_hatch.o \
- obj/rs_insert.o \
- obj/rs_image.o \
- obj/rs_layer.o \
- obj/rs_layerlist.o \
- obj/rs_leader.o \
- obj/rs_line.o \
- obj/rs_pattern.o \
- obj/rs_patternlist.o \
- obj/rs_point.o \
- obj/rs_polyline.o \
- obj/rs_settings.o \
- obj/rs_solid.o \
- obj/rs_spline.o \
- obj/rs_string.o \
- obj/rs_system.o \
- obj/rs_text.o \
- obj/rs_undo.o \
- obj/rs_undoable.o \
- obj/rs_units.o \
- obj/rs_utility.o \
- obj/rs_variabledict.o \
- obj/rs_vector.o \
- obj/rs_fileio.o \
- obj/rs_filtercxf.o \
- obj/rs_filterdxf.o \
- obj/rs_filterdxf1.o \
- obj/rs_dialogfactory.o \
- obj/rs_eventhandler.o \
- obj/rs_graphicview.o \
- obj/rs_grid.o \
- obj/rs_linetypepattern.o \
- obj/rs_painter.o \
- obj/rs_painterqt.o \
- obj/rs_staticgraphicview.o \
- obj/rs_information.o \
- obj/rs_infoarea.o \
- obj/rs_math.o \
- obj/rs_modification.o \
- obj/rs_selection.o \
- obj/rs_python.o \
- obj/rs_simplepython.o \
- obj/rs_python_wrappers.o \
- obj/rs_script.o \
- obj/rs_scriptlist.o
-FORMS =
-UICDECLS =
-UICIMPLS =
-SRCMOC = moc/moc_rs_actioninterface.cpp
-OBJMOC = obj/moc_rs_actioninterface.o
-DIST = ../../mkspecs/defs.pro \
- qcadlib.pro
-QMAKE_TARGET = qcad
-DESTDIR = ../lib/
-TARGET = libqcad.a
-
-first: all
-####### Implicit rules
-
-.SUFFIXES: .c .o .cpp .cc .cxx .C
-
-.cpp.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cc.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.cxx.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.C.o:
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
-
-.c.o:
- $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $<
-
-####### Build rules
-
-all: Makefile ../lib/$(TARGET)
-
-staticlib: ../lib/$(TARGET)
-
-../lib/$(TARGET): $(UICDECLS) $(OBJECTS) $(OBJMOC) $(OBJCOMP)
- test -d ../lib/ || mkdir -p ../lib/
- -$(DEL_FILE) $(TARGET)
- $(AR) $(TARGET) $(OBJECTS) $(OBJMOC)
- -$(DEL_FILE) ../lib/$(TARGET)
- -$(MOVE) $(TARGET) ../lib/
-
-
-mocables: $(SRCMOC)
-uicables: $(UICDECLS) $(UICIMPLS)
-
-$(MOC):
- ( cd $(QTDIR)/src/moc && $(MAKE) )
-
-Makefile: qcadlib.pro /usr/lib64/qt3/mkspecs/default/qmake.conf ../../mkspecs/defs.pro \
- /usr/lib64/qt3/lib64/libqt-mt.prl
- $(QMAKE) -o Makefile qcadlib.pro
-qmake:
- @$(QMAKE) -o Makefile qcadlib.pro
-
-dist:
- @mkdir -p obj/qcad && $(COPY_FILE) --parents $(SOURCES) $(HEADERS) $(FORMS) $(DIST) obj/qcad/ && $(COPY_FILE) --parents ts/qcadlib_cs.ts ts/qcadlib_et.ts ts/qcadlib_en.ts ts/qcadlib_da.ts ts/qcadlib_de.ts ts/qcadlib_el.ts ts/qcadlib_fr.ts ts/qcadlib_hu.ts ts/qcadlib_it.ts ts/qcadlib_nl.ts ts/qcadlib_no.ts ts/qcadlib_pl.ts ts/qcadlib_ru.ts ts/qcadlib_sk.ts ts/qcadlib_tr.ts obj/qcad/ && ( cd `dirname obj/qcad` && $(TAR) qcad.tar qcad && $(GZIP) qcad.tar ) && $(MOVE) `dirname obj/qcad`/qcad.tar.gz . && $(DEL_FILE) -r obj/qcad
-
-mocclean:
- -$(DEL_FILE) $(OBJMOC)
- -$(DEL_FILE) $(SRCMOC)
-
-uiclean:
-
-yaccclean:
-lexclean:
-clean: mocclean
- -$(DEL_FILE) $(OBJECTS)
- -$(DEL_FILE) *~ core *.core
-
-
-####### Sub-libraries
-
-distclean: clean
- -$(DEL_FILE) ../lib/$(TARGET) $(TARGET)
-
-
-FORCE:
-
-####### Compile
-
-obj/rs_actioninterface.o: actions/rs_actioninterface.cpp actions/rs_actioninterface.h \
- actions/rs_snapper.h \
- actions/rs_preview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_actioninterface.o actions/rs_actioninterface.cpp
-
-obj/rs_preview.o: actions/rs_preview.cpp actions/rs_preview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_preview.o actions/rs_preview.cpp
-
-obj/rs_previewactioninterface.o: actions/rs_previewactioninterface.cpp actions/rs_previewactioninterface.h \
- actions/rs_actioninterface.h \
- actions/rs_preview.h \
- actions/rs_snapper.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_previewactioninterface.o actions/rs_previewactioninterface.cpp
-
-obj/rs_snapper.o: actions/rs_snapper.cpp actions/rs_snapper.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_snapper.o actions/rs_snapper.cpp
-
-obj/rs_creation.o: creation/rs_creation.cpp creation/rs_creation.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_creation.o creation/rs_creation.cpp
-
-obj/rs_debug.o: debug/rs_debug.cpp debug/rs_debug.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_debug.o debug/rs_debug.cpp
-
-obj/rs_arc.o: engine/rs_arc.cpp engine/rs_arc.h \
- engine/rs_constructionline.h \
- engine/rs_atomicentity.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_arc.o engine/rs_arc.cpp
-
-obj/rs_block.o: engine/rs_block.cpp engine/rs_block.h \
- engine/rs_graphic.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_string.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_dict.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h \
- engine/rs_blocklist.h \
- engine/rs_variabledict.h \
- engine/rs_units.h \
- engine/rs_blocklistlistener.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_block.o engine/rs_block.cpp
-
-obj/rs_blocklist.o: engine/rs_blocklist.cpp engine/rs_blocklist.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_string.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_dict.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_blocklist.o engine/rs_blocklist.cpp
-
-obj/rs_clipboard.o: engine/rs_clipboard.cpp engine/rs_clipboard.h \
- engine/rs_block.h \
- engine/rs_layer.h \
- engine/rs_entity.h \
- engine/rs_graphic.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_blocklistlistener.h \
- engine/rs_ptrlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_string.h \
- engine/rs_layerlistlistener.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_dict.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_clipboard.o engine/rs_clipboard.cpp
-
-obj/rs_circle.o: engine/rs_circle.cpp engine/rs_circle.h \
- engine/rs_constructionline.h \
- engine/rs_atomicentity.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_circle.o engine/rs_circle.cpp
-
-obj/rs_constructionline.o: engine/rs_constructionline.cpp engine/rs_constructionline.h \
- engine/rs_atomicentity.h \
- engine/rs_vector.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_constructionline.o engine/rs_constructionline.cpp
-
-obj/rs_dimaligned.o: engine/rs_dimaligned.cpp engine/rs_dimaligned.h \
- engine/rs_graphic.h \
- engine/rs_units.h \
- engine/rs_constructionline.h \
- engine/rs_dimension.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dimaligned.o engine/rs_dimaligned.cpp
-
-obj/rs_dimangular.o: engine/rs_dimangular.cpp engine/rs_dimangular.h \
- engine/rs_constructionline.h \
- engine/rs_graphic.h \
- engine/rs_solid.h \
- engine/rs_text.h \
- engine/rs_dimension.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dimangular.o engine/rs_dimangular.cpp
-
-obj/rs_dimdiametric.o: engine/rs_dimdiametric.cpp engine/rs_dimdiametric.h \
- engine/rs_text.h \
- engine/rs_solid.h \
- engine/rs_graphic.h \
- engine/rs_units.h \
- engine/rs_dimension.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dimdiametric.o engine/rs_dimdiametric.cpp
-
-obj/rs_dimension.o: engine/rs_dimension.cpp engine/rs_dimension.h \
- engine/rs_solid.h \
- engine/rs_text.h \
- engine/rs_units.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dimension.o engine/rs_dimension.cpp
-
-obj/rs_dimlinear.o: engine/rs_dimlinear.cpp engine/rs_dimlinear.h \
- engine/rs_constructionline.h \
- engine/rs_text.h \
- engine/rs_solid.h \
- engine/rs_graphic.h \
- engine/rs_dimension.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dimlinear.o engine/rs_dimlinear.cpp
-
-obj/rs_dimradial.o: engine/rs_dimradial.cpp engine/rs_dimradial.h \
- engine/rs_text.h \
- engine/rs_solid.h \
- engine/rs_graphic.h \
- engine/rs_dimension.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dimradial.o engine/rs_dimradial.cpp
-
-obj/rs_document.o: engine/rs_document.cpp engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_string.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_dict.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_document.o engine/rs_document.cpp
-
-obj/rs_ellipse.o: engine/rs_ellipse.cpp engine/rs_ellipse.h \
- engine/rs_graphic.h \
- engine/rs_atomicentity.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_ptrlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_ellipse.o engine/rs_ellipse.cpp
-
-obj/rs_entity.o: engine/rs_entity.cpp engine/rs_entity.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_document.h \
- engine/rs_ellipse.h \
- engine/rs_graphic.h \
- engine/rs_insert.h \
- engine/rs_layer.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_polyline.h \
- engine/rs_text.h \
- engine/rs_stringlist.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_atomicentity.h \
- engine/rs_layerlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_ptrlist.h \
- engine/rs_undocycle.h \
- engine/rs_blocklist.h \
- engine/rs_variabledict.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_entity.o engine/rs_entity.cpp
-
-obj/rs_entitycontainer.o: engine/rs_entitycontainer.cpp engine/rs_entitycontainer.h \
- engine/rs_dimension.h \
- engine/rs_layer.h \
- engine/rs_line.h \
- engine/rs_polyline.h \
- engine/rs_text.h \
- engine/rs_insert.h \
- engine/rs_spline.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_block.h \
- engine/rs_graphic.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_blocklist.h \
- engine/rs_variabledict.h \
- engine/rs_units.h \
- engine/rs_blocklistlistener.h \
- engine/rs_variable.h \
- engine/rs_valuelist.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_entitycontainer.o engine/rs_entitycontainer.cpp
-
-obj/rs_font.o: engine/rs_font.cpp engine/rs_font.h \
- engine/rs_color.h \
- engine/rs_file.h \
- engine/rs_fileinfo.h \
- engine/rs_fontchar.h \
- engine/rs_regexp.h \
- engine/rs_string.h \
- engine/rs_system.h \
- engine/rs_textstream.h \
- engine/rs_blocklist.h \
- engine/rs_stringlist.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_dict.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h \
- engine/rs_dir.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_font.o engine/rs_font.cpp
-
-obj/rs_fontlist.o: engine/rs_fontlist.cpp engine/rs_fontlist.h \
- engine/rs_fileinfo.h \
- engine/rs_stringlist.h \
- engine/rs_system.h \
- engine/rs_dict.h \
- engine/rs_font.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_blocklist.h \
- engine/rs_string.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h \
- engine/rs_dir.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_fontlist.o engine/rs_fontlist.cpp
-
-obj/rs_graphic.o: engine/rs_graphic.cpp engine/rs_graphic.h \
- engine/rs_units.h \
- engine/rs_settings.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_string.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_dict.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_graphic.o engine/rs_graphic.cpp
-
-obj/rs_hatch.o: engine/rs_hatch.cpp engine/rs_hatch.h \
- engine/rs_graphic.h \
- engine/rs_pointarray.h \
- engine/rs_pattern.h \
- engine/rs_patternlist.h \
- engine/rs_entity.h \
- engine/rs_entitycontainer.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_hatch.o engine/rs_hatch.cpp
-
-obj/rs_insert.o: engine/rs_insert.cpp engine/rs_insert.h \
- engine/rs_block.h \
- engine/rs_graphic.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_blocklist.h \
- engine/rs_variabledict.h \
- engine/rs_units.h \
- engine/rs_blocklistlistener.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_insert.o engine/rs_insert.cpp
-
-obj/rs_image.o: engine/rs_image.cpp engine/rs_image.h \
- engine/rs_constructionline.h \
- engine/rs_atomicentity.h \
- engine/rs_img.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_image.o engine/rs_image.cpp
-
-obj/rs_layer.o: engine/rs_layer.cpp engine/rs_layer.h \
- engine/rs_color.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_layer.o engine/rs_layer.cpp
-
-obj/rs_layerlist.o: engine/rs_layerlist.cpp engine/rs_layerlist.h \
- engine/rs_layer.h \
- engine/rs_layerlistlistener.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_flags.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs.h \
- engine/rs_color.h \
- engine/rs_dict.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_layerlist.o engine/rs_layerlist.cpp
-
-obj/rs_leader.o: engine/rs_leader.cpp engine/rs_leader.h \
- engine/rs_line.h \
- engine/rs_solid.h \
- engine/rs_entity.h \
- engine/rs_entitycontainer.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_leader.o engine/rs_leader.cpp
-
-obj/rs_line.o: engine/rs_line.cpp engine/rs_line.h \
- engine/rs_graphic.h \
- engine/rs_atomicentity.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_ptrlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_point.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_line.o engine/rs_line.cpp
-
-obj/rs_pattern.o: engine/rs_pattern.cpp engine/rs_pattern.h \
- engine/rs_stringlist.h \
- engine/rs_fileinfo.h \
- engine/rs_system.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_dir.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_pattern.o engine/rs_pattern.cpp
-
-obj/rs_patternlist.o: engine/rs_patternlist.cpp engine/rs_patternlist.h \
- engine/rs_fileinfo.h \
- engine/rs_stringlist.h \
- engine/rs_system.h \
- engine/rs_pattern.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_entitycontainer.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_dir.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_patternlist.o engine/rs_patternlist.cpp
-
-obj/rs_point.o: engine/rs_point.cpp engine/rs_point.h \
- engine/rs_atomicentity.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_point.o engine/rs_point.cpp
-
-obj/rs_polyline.o: engine/rs_polyline.cpp engine/rs_polyline.h \
- engine/rs_line.h \
- engine/rs_arc.h \
- engine/rs_entity.h \
- engine/rs_entitycontainer.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_polyline.o engine/rs_polyline.cpp
-
-obj/rs_settings.o: engine/rs_settings.cpp engine/rs_settings.h \
- engine/rs_string.h \
- engine/rs_dict.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_settings.o engine/rs_settings.cpp
-
-obj/rs_solid.o: engine/rs_solid.cpp engine/rs_solid.h \
- engine/rs_atomicentity.h \
- engine/rs_vector.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_solid.o engine/rs_solid.cpp
-
-obj/rs_spline.o: engine/rs_spline.cpp engine/rs_spline.h \
- engine/rs_graphic.h \
- engine/rs_entitycontainer.h \
- engine/rs_valuelist.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_entity.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_blocklist.h \
- engine/rs_layerlist.h \
- engine/rs_variabledict.h \
- engine/rs_document.h \
- engine/rs_units.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_spline.o engine/rs_spline.cpp
-
-obj/rs_string.o: engine/rs_string.cpp engine/rs_string.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_string.o engine/rs_string.cpp
-
-obj/rs_system.o: engine/rs_system.cpp engine/rs_settings.h \
- engine/rs_system.h \
- engine/rs_regexp.h \
- engine/rs_translator.h \
- engine/rs_fileinfo.h \
- engine/rs_string.h \
- engine/rs_dict.h \
- engine/rs_dir.h \
- engine/rs_stringlist.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_system.o engine/rs_system.cpp
-
-obj/rs_text.o: engine/rs_text.cpp engine/rs_text.h \
- engine/rs_fontlist.h \
- engine/rs_insert.h \
- engine/rs_entity.h \
- engine/rs_entitycontainer.h \
- engine/rs_dict.h \
- engine/rs.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h \
- engine/rs_arc.h \
- engine/rs_circle.h \
- engine/rs_ellipse.h \
- engine/rs_line.h \
- engine/rs_point.h \
- engine/rs_ptrlist.h \
- engine/rs_atomicentity.h \
- engine/rs_font.h \
- engine/rs_blocklist.h \
- engine/rs_block.h \
- engine/rs_blocklistlistener.h \
- engine/rs_document.h \
- engine/rs_layerlist.h \
- engine/rs_undo.h \
- engine/rs_layerlistlistener.h \
- engine/rs_undocycle.h \
- engine/rs_graphic.h \
- engine/rs_variabledict.h \
- engine/rs_units.h \
- engine/rs_variable.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_text.o engine/rs_text.cpp
-
-obj/rs_undo.o: engine/rs_undo.cpp engine/rs_undo.h \
- engine/rs_undocycle.h \
- engine/rs_ptrlist.h \
- engine/rs.h \
- engine/rs_entity.h \
- engine/rs_undoable.h \
- engine/rs_dict.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_vector.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_undo.o engine/rs_undo.cpp
-
-obj/rs_undoable.o: engine/rs_undoable.cpp engine/rs_undoable.h \
- engine/rs_undocycle.h \
- engine/rs_flags.h \
- engine/rs.h \
- engine/rs_entity.h \
- engine/rs_ptrlist.h \
- engine/rs_dict.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_vector.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_undoable.o engine/rs_undoable.cpp
-
-obj/rs_units.o: engine/rs_units.cpp engine/rs_units.h \
- engine/rs.h \
- engine/rs_string.h \
- engine/rs_vector.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_units.o engine/rs_units.cpp
-
-obj/rs_utility.o: engine/rs_utility.cpp engine/rs_utility.h \
- engine/rs_string.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_utility.o engine/rs_utility.cpp
-
-obj/rs_variabledict.o: engine/rs_variabledict.cpp engine/rs_variabledict.h \
- engine/rs_variable.h \
- engine/rs_dict.h \
- engine/rs_string.h \
- engine/rs.h \
- engine/rs_vector.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_variabledict.o engine/rs_variabledict.cpp
-
-obj/rs_vector.o: engine/rs_vector.cpp engine/rs_vector.h \
- engine/rs_constructionline.h \
- engine/rs.h \
- engine/rs_atomicentity.h \
- engine/rs_entity.h \
- engine/rs_dict.h \
- engine/rs_layer.h \
- engine/rs_pen.h \
- engine/rs_string.h \
- engine/rs_stringlist.h \
- engine/rs_undoable.h \
- engine/rs_flags.h \
- engine/rs_color.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_vector.o engine/rs_vector.cpp
-
-obj/rs_fileio.o: fileio/rs_fileio.cpp fileio/rs_fileio.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_fileio.o fileio/rs_fileio.cpp
-
-obj/rs_filtercxf.o: filters/rs_filtercxf.cpp filters/rs_filtercxf.h \
- filters/rs_filterinterface.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_filtercxf.o filters/rs_filtercxf.cpp
-
-obj/rs_filterdxf.o: filters/rs_filterdxf.cpp filters/rs_filterdxf.h \
- filters/rs_filterinterface.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_filterdxf.o filters/rs_filterdxf.cpp
-
-obj/rs_filterdxf1.o: filters/rs_filterdxf1.cpp filters/rs_filterdxf.h \
- filters/rs_filterdxf1.h \
- filters/rs_filterinterface.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_filterdxf1.o filters/rs_filterdxf1.cpp
-
-obj/rs_dialogfactory.o: gui/rs_dialogfactory.cpp gui/rs_dialogfactory.h \
- gui/rs_dialogfactoryinterface.h \
- gui/rs_dialogfactoryadapter.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_dialogfactory.o gui/rs_dialogfactory.cpp
-
-obj/rs_eventhandler.o: gui/rs_eventhandler.cpp gui/rs_eventhandler.h \
- gui/rs_coordinateevent.h \
- gui/rs_event.h \
- gui/rs_keyevent.h \
- gui/rs_mouseevent.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_eventhandler.o gui/rs_eventhandler.cpp
-
-obj/rs_graphicview.o: gui/rs_graphicview.cpp gui/rs_graphicview.h \
- gui/rs_eventhandler.h \
- gui/rs_grid.h \
- gui/rs_keyevent.h \
- gui/rs_mouseevent.h \
- gui/rs_painter.h \
- gui/rs_linetypepattern.h \
- gui/rs_commandevent.h \
- gui/rs_event.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_graphicview.o gui/rs_graphicview.cpp
-
-obj/rs_grid.o: gui/rs_grid.cpp gui/rs_grid.h \
- gui/rs_graphicview.h \
- gui/rs_keyevent.h \
- gui/rs_linetypepattern.h \
- gui/rs_mouseevent.h \
- gui/rs_commandevent.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_grid.o gui/rs_grid.cpp
-
-obj/rs_linetypepattern.o: gui/rs_linetypepattern.cpp gui/rs_linetypepattern.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_linetypepattern.o gui/rs_linetypepattern.cpp
-
-obj/rs_painter.o: gui/rs_painter.cpp gui/rs_painter.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_painter.o gui/rs_painter.cpp
-
-obj/rs_painterqt.o: gui/rs_painterqt.cpp gui/rs_painterqt.h \
- gui/rs_graphicview.h \
- gui/rs_painter.h \
- gui/rs_keyevent.h \
- gui/rs_linetypepattern.h \
- gui/rs_mouseevent.h \
- gui/rs_commandevent.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_painterqt.o gui/rs_painterqt.cpp
-
-obj/rs_staticgraphicview.o: gui/rs_staticgraphicview.cpp gui/rs_staticgraphicview.h \
- gui/rs_graphicview.h \
- gui/rs_keyevent.h \
- gui/rs_linetypepattern.h \
- gui/rs_mouseevent.h \
- gui/rs_commandevent.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_staticgraphicview.o gui/rs_staticgraphicview.cpp
-
-obj/rs_information.o: information/rs_information.cpp information/rs_information.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_information.o information/rs_information.cpp
-
-obj/rs_infoarea.o: information/rs_infoarea.cpp information/rs_infoarea.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_infoarea.o information/rs_infoarea.cpp
-
-obj/rs_math.o: math/rs_math.cpp math/rs_math.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_math.o math/rs_math.cpp
-
-obj/rs_modification.o: modification/rs_modification.cpp modification/rs_modification.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_modification.o modification/rs_modification.cpp
-
-obj/rs_selection.o: modification/rs_selection.cpp modification/rs_selection.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_selection.o modification/rs_selection.cpp
-
-obj/rs_python.o: scripting/rs_python.cpp scripting/rs_python.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_python.o scripting/rs_python.cpp
-
-obj/rs_simplepython.o: scripting/rs_simplepython.cpp scripting/rs_simplepython.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_simplepython.o scripting/rs_simplepython.cpp
-
-obj/rs_python_wrappers.o: scripting/rs_python_wrappers.cpp scripting/rs_python_wrappers.h \
- scripting/rs_python.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_python_wrappers.o scripting/rs_python_wrappers.cpp
-
-obj/rs_script.o: scripting/rs_script.cpp scripting/rs_script.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_script.o scripting/rs_script.cpp
-
-obj/rs_scriptlist.o: scripting/rs_scriptlist.cpp scripting/rs_scriptlist.h \
- scripting/rs_script.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/rs_scriptlist.o scripting/rs_scriptlist.cpp
-
-obj/moc_rs_actioninterface.o: moc/moc_rs_actioninterface.cpp actions/rs_actioninterface.h actions/rs_snapper.h \
- actions/rs_preview.h
- $(CXX) -c $(CXXFLAGS) $(INCPATH) -o obj/moc_rs_actioninterface.o moc/moc_rs_actioninterface.cpp
-
-moc/moc_rs_actioninterface.cpp: $(MOC) actions/rs_actioninterface.h
- $(MOC) actions/rs_actioninterface.h -o moc/moc_rs_actioninterface.cpp
-
-####### Install
-
-install:
-
-uninstall:
-
--
UNNAMED PROJECT
More information about the debian-science-commits
mailing list