[SCM] FreeFem++ packaging branch, master, updated. debian/3.13.2-1-6-g09e9341
Dimitrios Eftaxiopoulos
eftaxi12 at otenet.gr
Mon Jul 4 02:00:29 UTC 2011
The following commit has been merged in the master branch:
commit 09e9341f7540f9735304baabf7f63c8ddc40f34f
Author: Dimitrios Eftaxiopoulos <eftaxi12 at otenet.gr>
Date: Mon Jul 4 04:55:59 2011 +0300
Create debian/source/options file to prevent the creation of long
unwanted patches
diff --git a/INSTALL b/INSTALL
index 7d1c323..54caf7c 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,25 +1,13 @@
-Installation Instructions
-*************************
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
Basic Installation
==================
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
+ These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -32,9 +20,9 @@ debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
+the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.
+cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -44,37 +32,30 @@ some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
- The simplest way to compile this package is:
+The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
+ the package.
4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -83,16 +64,6 @@ of `autoconf'.
all sorts of other programs in order to regenerate files that came
with the distribution.
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
Compilers and Options
=====================
@@ -104,7 +75,7 @@ for details on some of the pertinent environment variables.
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
@@ -113,89 +84,44 @@ Compiling For Multiple Architectures
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
+source code in the directory that `configure' is in and in `..'.
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
Installation Names
==================
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
+options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
+you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+Optional Features
+=================
+
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -208,45 +134,6 @@ find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
Specifying the System Type
==========================
@@ -262,15 +149,14 @@ type, such as `sun4', or a canonical name which has the form:
where SYSTEM can have one of these forms:
- OS
- KERNEL-OS
+ OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the `--target=TYPE' option to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
@@ -300,14 +186,9 @@ them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
-causes the specified `gcc' to be used as the C compiler (unless it is
+will cause the specified gcc to be used as the C compiler (unless it is
overridden in the site shell script).
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
`configure' Invocation
======================
@@ -316,14 +197,7 @@ operates.
`--help'
`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
+ Print a summary of the options to `configure', and exit.
`--version'
`-V'
@@ -350,16 +224,6 @@ operates.
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
diff --git a/configure b/configure
index 15b924c..7cbbd56 100755
--- a/configure
+++ b/configure
@@ -834,7 +834,9 @@ enable_optim
enable_generic
with_suffix
with_x
+with_flib
enable_opengl
+with_suffix
with_mpipath
with_mpilibs
with_mpilibsc
@@ -863,11 +865,21 @@ LIBS
CPPFLAGS
CXX
CXXFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
CCC
FC
FCFLAGS
+LDFLAGS
+LIBS
F77
FFLAGS
+LDFLAGS
+LIBS
+CC
+LDFLAGS
+LIBS
YACC
YFLAGS
XMKMF
diff --git a/debian/source/options b/debian/source/options
new file mode 100644
index 0000000..936aba9
--- /dev/null
+++ b/debian/source/options
@@ -0,0 +1 @@
+ extend-diff-ignore = "(^|/)(INSTALL|configure|depcomp|install-sh|missing|mkinstalldirs|src/fflib/strversionnumber\.cpp)$"
\ No newline at end of file
diff --git a/depcomp b/depcomp
index df8eea7..edb5d38 100755
--- a/depcomp
+++ b/depcomp
@@ -1,10 +1,7 @@
#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,7 +14,9 @@ scriptversion=2009-04-28.21; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -26,45 +25,22 @@ scriptversion=2009-04-28.21; # UTC
# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake at gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+ dir=`echo "$object" | sed 's,/.*$,/,'`
+ if test "$dir" = "$object"; then
+ dir=
+ fi
+ # FIXME: should be _deps on DOS.
+ depfile="$dir.deps/$base"
+fi
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
@@ -85,34 +61,12 @@ if test "$depmode" = dashXmstdout; then
depmode=dashmstdout
fi
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u="sed s,\\\\\\\\,/,g"
- depmode=msvisualcpp
-fi
-
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
@@ -199,14 +153,14 @@ sgi)
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
-' ' ' >> "$depfile"
- echo >> "$depfile"
+' ' ' >> $depfile
+ echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ >> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -222,39 +176,34 @@ aix)
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ rm -f "$tmpdepfile"
exit $stat
fi
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -302,51 +251,6 @@ icc)
rm -f "$tmpdepfile"
;;
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -358,43 +262,27 @@ tru64)
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
+ if test -f "$tmpdepfile1"; then
+ tmpdepfile="$tmpdepfile1"
+ else
+ tmpdepfile="$tmpdepfile2"
+ fi
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
@@ -416,7 +304,7 @@ dashmstdout)
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
@@ -467,39 +355,32 @@ makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no eat=no
- for arg
- do
+ cleared=no
+ for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
- if test $eat = yes; then
- eat=no
- continue
- fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
@@ -519,7 +400,7 @@ cpp)
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
@@ -545,8 +426,7 @@ cpp)
done
"$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
@@ -557,27 +437,13 @@ cpp)
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
"$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
IFS=" "
for arg
do
case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
@@ -590,23 +456,16 @@ msvisualcpp)
;;
esac
done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
none)
exec "$@"
;;
@@ -618,13 +477,3 @@ none)
esac
exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/install-sh b/install-sh
index 6781b98..4fbbae7 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2006-10-14.15
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
+doit="${DOITPROG-}"
if test -z "$doit"; then
doit_exec=exec
else
@@ -58,49 +58,34 @@ fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+posix_glob=
posix_mkdir=
# Desired mode of installed file.
mode=0755
-chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
+chgrpcmd=
stripcmd=
-
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
src=
dst=
dir_arg=
-dst_arg=
-
-copy_on_change=false
+dstarg=
no_target_directory=
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
@@ -110,55 +95,65 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
- --help display this help and exit.
- --version display version info and exit.
-
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
- -c) ;;
-
- -C) copy_on_change=true;;
+ -c) shift
+ continue;;
- -d) dir_arg=true;;
+ -d) dir_arg=true
+ shift
+ continue;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift
+ shift
+ continue;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
+ shift
+ shift
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
- shift;;
+ continue;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift
+ shift
+ continue;;
- -s) stripcmd=$stripprog;;
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
- -t) dst_arg=$2
- shift;;
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
- -T) no_target_directory=true;;
+ -T) no_target_directory=true
+ shift
+ continue;;
--version) echo "$0 $scriptversion"; exit $?;;
@@ -170,22 +165,21 @@ while test $# -ne 0; do
*) break;;
esac
- shift
done
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
- if test -n "$dst_arg"; then
+ if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
+ set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
- dst_arg=$arg
+ dstarg=$arg
done
fi
@@ -230,7 +224,7 @@ for src
do
# Protect names starting with `-'.
case $src in
- -*) src=./$src;;
+ -*) src=./$src ;;
esac
if test -n "$dir_arg"; then
@@ -248,22 +242,22 @@ do
exit 1
fi
- if test -z "$dst_arg"; then
+ if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
- dst=$dst_arg
+ dst=$dstarg
# Protect names starting with `-'.
case $dst in
- -*) dst=./$dst;;
+ -*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
+ echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dstdir=$dst
@@ -384,19 +378,26 @@ do
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
esac
- eval "$initialize_posix_glob"
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ $posix_glob && set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ $posix_glob && set +f
IFS=$oIFS
prefixes=
@@ -458,54 +459,41 @@ do
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ || {
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ } || exit 1
trap '' 0
fi
@@ -515,6 +503,5 @@ done
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
diff --git a/missing b/missing
index 28055d2..fc54c64 100755
--- a/missing
+++ b/missing
@@ -1,10 +1,6 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -18,7 +14,9 @@ scriptversion=2009-04-28.21; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -31,8 +29,6 @@ if test $# -eq 0; then
fi
run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -42,24 +38,18 @@ else
configure_ac=configure.in
fi
-msg="missing on your system"
-
-case $1 in
+case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
-h|--h|--he|--hel|--help)
echo "\
@@ -77,7 +67,6 @@ Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -85,18 +74,11 @@ Supported PROGRAM values:
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake at gnu.org>."
- exit $?
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
+ echo "missing 0.4 - GNU automake"
;;
-*)
@@ -105,69 +87,42 @@ Send bug reports to <bug-automake at gnu.org>."
exit 1
;;
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar*)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
+ aclocal*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
fi
- ;;
-esac
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
- autoconf*)
+ autoconf)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
- autoheader*)
+ autoheader)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
@@ -175,7 +130,7 @@ WARNING: \`$1' is $msg. You should only need it if
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case $f in
+ case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -185,8 +140,13 @@ WARNING: \`$1' is $msg. You should only need it if
;;
automake*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
@@ -195,16 +155,21 @@ WARNING: \`$1' is $msg. You should only need it if
while read f; do touch "$f"; done
;;
- autom4te*)
+ autom4te)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
@@ -218,108 +183,111 @@ WARNING: \`$1' is needed, but is $msg.
fi
;;
- bison*|yacc*)
+ bison|yacc)
echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if test ! -f y.tab.h; then
+ if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
- if test ! -f y.tab.c; then
+ if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
- lex*|flex*)
+ lex|flex)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if test ! -f lex.yy.c; then
+ if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
- help2man*)
+ help2man)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit $?
+ exit 1
fi
;;
- makeinfo*)
+ makeinfo)
+ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+ # We have makeinfo, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
touch $file
;;
- tar*)
+ tar)
shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
@@ -332,13 +300,13 @@ WARNING: \`$1' is $msg. You should only need it if
fi
firstarg="$1"
if shift; then
- case $firstarg in
+ case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case $firstarg in
+ case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
@@ -355,8 +323,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
*)
echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
@@ -366,11 +334,3 @@ WARNING: \`$1' is needed, and is $msg.
esac
exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/mkinstalldirs b/mkinstalldirs
index 4191a45..d2d5f21 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -1,36 +1,21 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2009-04-28.21; # UTC
-
-# Original author: Noah Friedman <friedman at prep.ai.mit.edu>
+# Author: Noah Friedman <friedman at prep.ai.mit.edu>
# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake at gnu.org> or send patches to
-# <automake-patches at gnu.org>.
+# Public domain
-nl='
-'
-IFS=" "" $nl"
errstatus=0
-dirmode=
+dirmode=""
usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake at gnu.org>."
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
# process command line arguments
while test $# -gt 0 ; do
case $1 in
-h | --help | --h*) # -h for help
- echo "$usage"
- exit $?
+ echo "$usage" 1>&2
+ exit 0
;;
-m) # -m PERM arg
shift
@@ -38,10 +23,6 @@ while test $# -gt 0 ; do
dirmode=$1
shift
;;
- --version)
- echo "$0 $scriptversion"
- exit $?
- ;;
--) # stop option processing
shift
break
@@ -69,58 +50,30 @@ case $# in
0) exit 0 ;;
esac
-# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error. This is a problem when calling mkinstalldirs
-# from a parallel make. We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
case $dirmode in
'')
- if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ if mkdir -p -- . 2>/dev/null; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
- else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- test -d ./-p && rmdir ./-p
- test -d ./--version && rmdir ./--version
fi
;;
*)
- if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
- test ! -d ./--version; then
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
- else
- # Clean up after NextStep and OpenStep mkdir.
- for d in ./-m ./-p ./--version "./$dirmode";
- do
- test -d $d && rmdir $d
- done
fi
;;
esac
for file
do
- case $file in
- /*) pathcomp=/ ;;
- *) pathcomp= ;;
- esac
- oIFS=$IFS
- IFS=/
- set fnord $file
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
shift
- IFS=$oIFS
+ pathcomp=
for d
do
- test "x$d" = x && continue
-
- pathcomp=$pathcomp$d
+ pathcomp="$pathcomp$d"
case $pathcomp in
-*) pathcomp=./$pathcomp ;;
esac
@@ -131,21 +84,21 @@ do
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
- errstatus=$lasterr
+ errstatus=$lasterr
else
- if test ! -z "$dirmode"; then
+ if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
- lasterr=
- chmod "$dirmode" "$pathcomp" || lasterr=$?
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
fi
fi
- pathcomp=$pathcomp/
+ pathcomp="$pathcomp/"
done
done
@@ -154,9 +107,5 @@ exit $errstatus
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
# End:
+# mkinstalldirs ends here
diff --git a/src/fflib/strversionnumber.cpp b/src/fflib/strversionnumber.cpp
index 0e7ac8a..6d3ee34 100644
--- a/src/fflib/strversionnumber.cpp
+++ b/src/fflib/strversionnumber.cpp
@@ -18,6 +18,6 @@ string StrVersionNumber(){
// buffer.precision(8);
// buffer<<VersionNumber();
static char buffer[100];
- sprintf(buffer," %9f (date Mon Jul 4 00:08:24 UTC 2011)",VersionNumber());
- return buffer; //.str()+" (date Mon Jul 4 00:08:24 UTC 2011)" ;
+ sprintf(buffer," %9f (date Mar 28 jui 2011 09:22:37 CEST)",VersionNumber());
+ return buffer; //.str()+" (date Mar 28 jui 2011 09:22:37 CEST)" ;
}
--
FreeFem++ packaging
More information about the debian-science-commits
mailing list