[sundials] 01/21: imported debianization from sundials=2.5.0-4
Dima Kogan
dima at secretsauce.net
Tue Oct 11 07:12:50 UTC 2016
This is an automated email from the git hooks/post-receive script.
dkogan-guest pushed a commit to branch master
in repository sundials.
commit 57eb02b1ec69036e28736823f00ffafdab9ff756
Author: Dima Kogan <Dmitriy.Kogan at jpl.nasa.gov>
Date: Tue Oct 4 20:42:43 2016 -0700
imported debianization from sundials=2.5.0-4
---
debian/README.Debian | 23 +
debian/README.source | 9 +
debian/changelog | 301 ++
debian/check.sh | 45 +
debian/clean | 3 +
debian/compat | 1 +
debian/control | 193 +
debian/copyright | 71 +
debian/docs | 1 +
debian/libsundials-cvode1.install | 1 +
debian/libsundials-cvode1.symbols | 189 +
debian/libsundials-cvodes2.install | 1 +
debian/libsundials-cvodes2.symbols | 300 ++
debian/libsundials-doc.install | 1 +
debian/libsundials-ida2.install | 1 +
debian/libsundials-ida2.symbols | 192 +
debian/libsundials-idas0.install | 1 +
debian/libsundials-idas0.symbols | 302 ++
debian/libsundials-kinsol1.install | 1 +
debian/libsundials-kinsol1.symbols | 164 +
debian/libsundials-nvecparallel-dev.install | 6 +
debian/libsundials-nvecparallel0.install | 2 +
debian/libsundials-nvecparallel0.symbols | 55 +
debian/libsundials-nvecserial0.install | 2 +
debian/libsundials-nvecserial0.symbols | 55 +
debian/libsundials-parallel.lintian-overrides | 2 +
debian/libsundials-serial-dev.install | 21 +
debian/libsundials-serial-doc.docs | 11 +
debian/libsundials-serial.lintian-overrides | 2 +
debian/octave-sundials.install | 2 +
debian/orig-tar.exclude | 2 +
debian/orig-tarball.sh | 17 +
debian/patches/bashim.diff | 19 +
debian/patches/cmake.patch | 111 +
debian/patches/fix-format-error.patch | 65 +
debian/patches/link-blas-lapack.patch | 104 +
debian/patches/makefile.patch | 465 ++
debian/patches/modern-ltmain.sh.patch | 5878 +++++++++++++++++++++++++
debian/patches/octave-sundialstb.patch | 193 +
debian/patches/series | 7 +
debian/patches/sh4.patch | 13 +
debian/patches/sundials-config.patch | 34 +
debian/rules | 114 +
debian/source.lintian-overrides | 5 +
debian/source/format | 1 +
debian/sundials-config.1 | 57 +
debian/watch | 4 +
47 files changed, 9047 insertions(+)
diff --git a/debian/README.Debian b/debian/README.Debian
new file mode 100644
index 0000000..0033dc2
--- /dev/null
+++ b/debian/README.Debian
@@ -0,0 +1,23 @@
+sundials for Debian
+----------------
+
+Configuring Octave's startup
+
+
+"""
+Matlab will execute a file named 'startup.m' in the directory it was called from on the command line. Octave does not. It will, however, execute a file named '.octaverc' which can be edited to execute existing files
+
+if ( exist ('startup.m', 'file') )
+ source ('startup.m') # load startup.m like matlab
+endif
+"""
+
+According to the above doc create or add the folliwng lines to your .octaverc to activate sundials bindings for octave:
+
+ % SUNDIALS Toolbox startup M-file, if it exists.
+ if ( exist('startup_STB.m','file') )
+ source ('startup_STB.m') # load startup.m like matlab
+ end
+
+
+ -- Christophe Trophime <christophe.trophime at lncmi.cnrs.fr> Mon, 24 Oct 2011 15:01:41 +0200
diff --git a/debian/README.source b/debian/README.source
new file mode 100644
index 0000000..94c2cb7
--- /dev/null
+++ b/debian/README.source
@@ -0,0 +1,9 @@
+sundials source for Debian
+---------------------------
+
+Packaging makes use of CDBS and quilt. For the latter see
+`/usr/share/doc/quilt/README.source'.
+
+Documentation files included in the distribution have been removed
+You can find sundials documentation on
+https://computation.llnl.gov/casc/sundials/documentation/documentation.html
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..284fa3b
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,301 @@
+sundials (2.5.0-4) unstable; urgency=medium
+
+ * Remove myself from the uploaders
+
+ -- Sylvestre Ledru <sylvestre at debian.org> Sat, 26 Dec 2015 23:50:53 +0100
+
+sundials (2.5.0-3) unstable; urgency=low
+
+ * Team upload.
+ * Revert changes from experimental version which inadvertently made it into
+ the previous upload.
+ * Improve the fix for missing BLAS and LAPACK dependencies (closes: #700525)
+ + no longer pass BLAS and LAPACK through LDFLAGS
+ + link-blas-lapack.patch: new patch which rather adds the dependencies at
+ the libtool link level
+ + add missing dependency of libsundials-serial-dev on libblas-dev and
+ liblapack-dev
+ * Fix the dependency of octave-sundials on octave.
+
+ -- Sébastien Villemot <sebastien at debian.org> Wed, 27 Feb 2013 16:58:32 +0100
+
+sundials (2.5.0-2) unstable; urgency=low
+
+ * debian/rules:
+ - Add -lblas -llapack -lm to LDFLAGS (closes: #700525)
+
+ -- Christophe Trophime <christophe.trophime at lncmi.cnrs.fr> Thu, 14 Feb 2013 16:58:48 +0100
+
+sundials (2.5.0-2~exp1) experimental; urgency=low
+
+ [ Andrew Miller ]
+ * Fix spelling of suite (closes: #680881)
+ * Add a -dbg package (closes: #680878)
+
+ [ Rafael Laboissiere ]
+ * debian/rules:
+ - Install .mex files in the appropriate directory
+
+ * Switch to buildsystem to cmake
+ * Switch to debhelper 9
+ * Switch to dpkg-source 3.0 (quilt) format
+
+ * Add support for parallel version
+ * Add a separate package for examples
+ * Modify check.sh to run serial tests
+
+ -- Christophe Trophime <christophe.trophime at lncmi.cnrs.fr> Mon, 9 Jul 2012 09:40:03 +1200
+
+sundials (2.5.0-1) unstable; urgency=low
+
+ * New upstream release
+ * Remove sh4.patch
+ * Standards-Version changed to 3.9.3
+
+ [Kamaraju Kusumanchi][Rafael Laboissiere]
+ * Adjust for the new octave package version 3.6.1 (closes: #668830)
+
+ -- Christophe Trophime <christophe.trophime at lncmi.cnrs.fr> Tue, 24 Apr 2012 08:49:39 +0200
+
+sundials (2.4.0-6) unstable; urgency=low
+
+ * Rebuild using the last version of hdf5.
+
+ -- Sylvestre Ledru <sylvestre at debian.org> Thu, 26 Jan 2012 10:18:07 +0100
+
+sundials (2.4.0-5) unstable; urgency=low
+
+ * debian/rules: remove duplicate definition of debexp var.
+ This brings back the missing static libraries (closes: #650933)
+ * debian/control: add DM-Upload-Allowed
+
+ -- Christophe Trophime <christophe.trophime at lncmi.cnrs.fr> Mon, 05 Dec 2011 08:36:33 +0100
+
+sundials (2.4.0-4) unstable; urgency=low
+
+ * add octave support
+
+ [Peter Green]
+ * debian/patches: add fix-format-error.patch (Closes: #646457)
+
+ -- Christophe Trophime <christophe.trophime at lncmi.cnrs.fr> Mon, 24 Oct 2011 15:01:41 +0200
+
+sundials (2.4.0-3) unstable; urgency=low
+
+ * Change the uploader to Debian Science
+ * Standards-Version changed to 3.9.2
+
+ -- Sylvestre Ledru <sylvestre at debian.org> Mon, 08 Aug 2011 22:29:34 +0200
+
+sundials (2.4.0-2) unstable; urgency=low
+
+ [Nobuhiro Iwamatsu]
+ * debian/patches: add sh4.patch (Closes: #602160)
+
+ -- Christophe Trophime <christophe.trophime at grenoble.cnrs.fr> Mon, 14 Feb 2011 11:25:18 +0100
+
+sundials (2.4.0-1) unstable; urgency=low
+
+ * Standards-Version changed to 3.9.1
+
+ [ Christophe Trophime ]
+ * Team upload
+ * New upstream version
+ * Add a separate package for IDAS
+ * Remove pdf from the orig tarball
+ * debian/control: add missing builddependencies on blas/lapack
+ * debian/control: remove libsundials-serial-doc
+ * debian/rules: modify get-orig-rules target to remove pdf from the orig
+ tarball
+ * debian/orig-tarball.sh: change to force download to tarballs directory
+
+ -- Sylvestre Ledru <sylvestre at debian.org> Sat, 09 Oct 2010 18:18:22 +0200
+
+sundials (2.3.0-2) unstable; urgency=low
+
+ * Package moved to debian-science
+ * Raphael removed and add myself in the Uploaders list (Closes: #571898)
+ * Missing replace/conflicts added (Closes: #540498)
+ * No longer install *.la files
+ * bashim removed (Closes: #530983)
+ * Standards-Version updated to version 3.8.4
+
+ -- Sylvestre Ledru <sylvestre at debian.org> Tue, 30 Mar 2010 22:54:48 +0200
+
+sundials (2.3.0-1) unstable; urgency=low
+
+ [ Andrey Romanenko ]
+ * New upstream release
+ * Added sundials-config man page
+
+ [ Rafael Laboissiere ]
+ * Switch from CDBS' simple-patchsys to quilt
+ * Split the libsundials-serial package into individual library packages
+ * debian/clean: Add file for removing config.log (Lintian warning) and the
+ .libs/* files, which are not cleaned by make clean but should
+ * debian/compat: Bump debhelper compatibility to v7
+ * debian/control:
+ + Build-depends on debhelper >= 7, such that debian/clean is taken
+ into account
+ + Added Homepage, Vcs-Svn, and Vcs-Browser fields to the Source
+ section
+ + Dropped the Homepage pseudo-header from the extended descriptions
+ + Bumped Standards-Version to 3.8.0
+ + Switch from ${Source-Version} substvar to ${binary:Version}
+ + Fix Lintian warnings debhelper-but-no-misc-depends
+ + Drop duplicated Section fields in the Package stanzas
+ * debian/sundials-config.1: Drop .NH macro
+ * debian/watch: Add file for uscan
+ * debian/orig-tarball.sh: Add script for use by uscan. This is necessary
+ because of the javascript URL investigated in debian/watch.
+ * debian/{libsundials-cvode0,libsundials-cvodes1,libsundials-ida1,
+ libsundials-kinsol0,libsundials-nvecserial0}.symbols : Add shared
+ library symbols files
+ * debian/check.sh: Add script for exercising the serial checks
+ * debian/rules:
+ + (build/libsundials-serial): Call debian/check.sh
+ + (binary-install/libsundials-serial-dev): Install
+ the *.c, *.f, *.out, and READMe files from the examples/ directory.
+ * debian/control: Mention the presence of the examples in the
+ description of the libsundials-serial-dev package
+ * debian/patches/modern-ltmain.sh.patch: Add header and make Lintian happy
+ * debian/source.lintian-overrides: Override the ancient-libtool warning
+
+ [ Daniel Leidert ]
+ * debian/control (Depends): Added gfortran to build FORTRAN examples.
+ * debian/libsundials-cvode0.install: Removed DEB_DESTDIR from path.
+ * debian/libsundials-cvodes1.install: Ditto.
+ * debian/libsundials-ida1.install: Ditto.
+ * debian/libsundials-kinsol0.install: Ditto.
+ * debian/libsundials-nvecserial0.install: Ditto.
+ * debian/libsundials-serial-dev.install: Ditto. Further removed manpage
+ installation (done with dh_installman).
+ * debian/sundials-config.1: Minor format changes.
+ * debian/rules: Added get-orig-source target to retieve source code via
+ wget, which works atm. Set gfortran as FORTRAN compiler. Install
+ everything from DEB_DESTDIR.
+ (DEB_CONFIGURE_EXTRA_FLAGS): Removed --enable-fortran, which is not a
+ valid option.
+ (install/libsundials-serial-dev): Removed target. Better done with
+ DEB_INSTALL_MANPAGES.
+
+ -- Rafael Laboissiere <rafael at debian.org> Wed, 11 Feb 2009 17:58:22 +0100
+
+sundials (2.2.0-3) unstable; urgency=low
+
+ * debian/control: Changed maintainer to the pkg-scicomp team at Alioth
+
+ -- Rafael Laboissiere <rafael at debian.org> Sat, 16 Sep 2006 13:11:09 +0200
+
+sundials (2.2.0-2) unstable; urgency=low
+
+ * debian/rules:
+ - Create directories $(DEB_DESTDIR)/usr/{lib,include} before
+ installing the package. This should be done by the upstream
+ Makefiles (but it is not) and was preventing the libsundials_nvec
+ library and associated include files from being shipped in the
+ package (closes: #385630).
+ - Also reported in Bug#385630 was the fact that the libdir lines in
+ the *.la files were wrong. again, this is an upstream defect,
+ because there is no way to prevent the -rpath option from being
+ used. This problem is fixed in this version.
+
+ -- Rafael Laboissiere <rafael at debian.org> Sun, 3 Sep 2006 14:31:59 +0200
+
+sundials (2.2.0-1) unstable; urgency=low
+
+ [ Andrey Romanenko ]
+ * New upstream release
+ * debian/libsundials-serial-dev.install: add lines to copy the content of
+ include/sundials subdirectories
+ * config/ltmain.sh: upgrade with the current version to solve the .so
+ extension problem
+ * debian/libsundials-serial.lintian: removed
+ * debian/lintian/libsundials-serial0: new file
+
+ [ Rafael Laboissiere ]
+ * Switched to cdbs
+ * Since upstream is using soversion numbers for the libraries, the
+ package is renamed from libsundials-serial to libsundials-serial0
+ * debian/control: Bumped Standards-Version to 3.7.2 (no changes needed)
+
+ -- Rafael Laboissiere <rafael at debian.org> Mon, 8 May 2006 12:32:29 +0200
+
+sundials (2.1.1-7) unstable; urgency=low
+
+ +++ Changes by Rafael Laboissiere
+
+ * debian/control: Bumped Standards-Version to 3.7.0 (no changes needed)
+
+ -- Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org> Thu, 3 May 2006 22:24:39 +0000
+
+sundials (2.1.1-6) unstable; urgency=low
+
+ +++ Changes by Thomas Weber
+
+ * debian/control: make doc package architecture "all"
+ debian/rules: dito (closes: #346392)
+
+ -- Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org> Sun, 8 Jan 2006 23:24:39 +0100
+
+sundials (2.1.1-5) unstable; urgency=low
+
+ +++ Changes by Rafael Laboissiere
+
+ * First official Debian release (closes: #341565)
+
+ -- Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org> Tue, 6 Dec 2005 19:52:13 +0100
+
+sundials (2.1.1-4) unstable; urgency=low
+
+ +++ Changes by Rafael Laboissiere
+
+ * debian/control: Changed the name of the source package to sundials.
+ This corresponds to the name of the origianl usptream tarball.
+
+ -- Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org> Thu, 1 Dec 2005 08:32:22 +0100
+
+libsundials-serial (2.1.1-3) unstable; urgency=low
+
+ +++ Changes by Andrey Romanenko
+
+ * Set Maintainer to Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org>
+ * Create a documentation package that contains the user guides of the
+ solvers
+ * Change the name of the package containing the dynamic libraries to
+ sundials-serial
+ * added a lintian override file
+
+ +++ Changes by Rafael Laboissiere
+
+ * Centralize the /usr/share/doc/<pkg>* directories, by symlinking both
+ <pkg>-dev and <pkg>-doc to <pkg>. This forces the dependency of
+ libsundails-serial-doc on libsundials-serial.
+
+ -- Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org> Wed, 26 Oct 2005 12:47:56 +0100
+
+libsundials-serial (2.1.1-2) unstable; urgency=low
+
+ * Move header files into /usr/include/sundials
+
+ -- Andrey Romanenko <andrey at enginum.com> Fri, 21 Oct 2005 17:20:49 +0100
+
+libsundials-serial (2.1.1-1) unstable; urgency=low
+
+ * Initial release
+
+ -- Andrey Romanenko <andrey at enginum.com> Fri, 21 Oct 2005 17:19:32 +0100
+
+Local Variables:
+eval: (progn
+ (make-local-hook 'debian-changelog-add-version-hook)
+ (add-hook
+ 'debian-changelog-add-version-hook
+ (lambda ()
+ (save-excursion
+ (forward-line -1)
+ (beginning-of-line)
+ (insert "\n NOT YET RELEASED!\n\n [ "
+ (or (getenv "DEBFULLNAME") (user-full-name)) " ]")))
+ nil t))
+End:
diff --git a/debian/check.sh b/debian/check.sh
new file mode 100644
index 0000000..5cba9e2
--- /dev/null
+++ b/debian/check.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+
+## Simple script for exercising the serial checks of Sundials
+## Author: Rafael Laboissiere <rafael at debian.org>
+
+RESULTS=$(tempfile)
+
+cleanup(){
+ rm -f $RESULTS
+}
+trap "cleanup" 1 2 3 13 15
+
+CWD=$(pwd)
+cd $1/examples
+
+for dir in $(find . -type d -maxdepth 1 -mindepth 1) ; do
+ #for mode in "serial" "fcmix_serial" "parallel" "fcmix_parallel" ; do
+ for mode in "serial" ; do
+ cd $dir/$mode
+ echo "tests in " $mode
+ for prog in $(find . -executable -type f) ; do
+ echo -n "Checking $prog... "
+ if [ "$mode" != "parallel" ]; then
+ ./$prog > $RESULTS
+ else
+ OMPI_MCA_plm_rsh_agent=/bin/false ./$prog > $RESULTS
+ fi
+
+ if test -e $2/examples/$dir/serial/$prog.out ; then
+ DIFF=$(diff -u $2/examples/$dir/serial/$prog.out $RESULTS)
+ if test -z "$DIFF" ; then
+ echo success
+ else
+ echo fail
+ echo "$DIFF"
+ fi
+ else
+ echo pass
+ fi
+ done
+ cd $1/examples
+ done
+done
+
+cd $CWD
diff --git a/debian/clean b/debian/clean
new file mode 100644
index 0000000..8f4dafa
--- /dev/null
+++ b/debian/clean
@@ -0,0 +1,3 @@
+config.log
+src/*/.libs/*
+src/*/*/.libs/*
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..02f9d76
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,193 @@
+Source: sundials
+Priority: optional
+Section: libs
+Maintainer: Debian Science Team <debian-science-maintainers at lists.alioth.debian.org>
+Uploaders: Christophe Trophime <christophe.trophime at lncmi.cnrs.fr>
+Build-Depends: debhelper (>= 9), cmake, gfortran, mpi-default-dev,
+ libblas-dev | libblas-3gf.so, liblapack-dev | liblapack-3gf.so,
+ octave-pkg-dev (>= 0.7.0)
+Standards-Version: 3.9.3
+Homepage: http://www.llnl.gov/CASC/sundials/
+Vcs-Svn: svn://svn.debian.org/svn/debian-science/packages/sundials/trunk/
+Vcs-Browser: http://svn.debian.org/viewsvn/debian-science/packages/sundials/trunk/
+
+Package: libsundials-serial
+Architecture: any
+Depends: libsundials-cvode1, libsundials-cvodes2, libsundials-ida2,
+ libsundials-idas0, libsundials-kinsol1, libsundials-nvecserial0, ${misc:Depends}
+Conflicts: libsundials-serial0
+Replaces: libsundials-serial0
+Description: SUite of Nonlinear and DIfferential/ALgebraic equation Solvers
+ The family of solvers referred to as SUNDIALS consists of solvers CVODE
+ (for ODE systems), CVODES (ODE with sensitivity analysis capabilities),
+ IDA (for differential-algebraic systems), and KINSOL (for nonlinear
+ algebraic systems).
+ .
+ This package depends on all other packages containing the shared
+ libraries for the subcomponents of SUNDIALS: CVODE, CVODES, IDA,
+ KINSOL, and NVECTOR_SERIAL.
+
+Package: libsundials-parallel
+Architecture: any
+Depends: libsundials-cvode1, libsundials-cvodes2, libsundials-ida2,
+ libsundials-idas0, libsundials-kinsol1, libsundials-nvecparallel0,
+ ${misc:Depends}, mpi-default-run
+Description: SUite of Nonlinear and DIfferential/ALgebraic equation Solvers
+ The family of solvers referred to as SUNDIALS consists of solvers CVODE
+ (for ODE systems), CVODES (ODE with sensitivity analysis capabilities),
+ IDA (for differential-algebraic systems), and KINSOL (for nonlinear
+ algebraic systems).
+ .
+ This package depends on all other packages containing the shared
+ libraries for the subcomponents of SUNDIALS: CVODE, CVODES, IDA,
+ KINSOL, and NVECTOR_PARALLEL.
+
+Package: libsundials-cvode1
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: ordinary differentialequation solver (SUNDIALS library)
+ This package contains the library for ordinary differential equation
+ (ODE) system solvers from SUNDIALS (SUite of Nonlinear and
+ DIfferential/ALgebraic equation Solvers).
+
+Package: libsundials-cvodes2
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: ODE solver with sensistivity analysis (SUNDIALS library)
+ This package contains the library for ordinary differential equation
+ (ODE) system solver with sensistivity analysis capabilities from
+ SUNDIALS (SUite of Nonlinear and DIfferential/ALgebraic equation
+ Solvers).
+
+Package: libsundials-ida2
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: differential-algebraic system solver (SUNDIALS library)
+ This package contains the library for differential-algebraic system
+ (IDA) solver from SUNDIALS (SUite of Nonlinear and
+ DIfferential/ALgebraic equation Solvers).
+
+Package: libsundials-idas0
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: IDA solver with sensitivity capabilities (SUNDIALS library)
+ This package contains the library for differential-algebraic system
+ with Sensitivity capabilities (IDAS) solver from SUNDIALS (SUite of
+ Nonlinear and DIfferential/ALgebraic equation Solvers).
+
+Package: libsundials-kinsol1
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: KINSOL solver (SUNDIALS library)
+ This package contain the library for KINSOL (nonlinear algebraic
+ systems) system solver from SUNDIALS (SUite of Nonlinear and
+ DIfferential/ALgebraic equation Solvers).
+
+Package: libsundials-nvecserial0
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: vector operations library (SUNDIALS library)
+ This package provides implementations for all vector operations
+ defined by the generic NVECTOR module in the table of operations for
+ SUNDIALS (SUite of Nonlinear and DIfferential/ALgebraic equation
+ Solvers).
+
+Package: libsundials-nvecparallel0
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, mpi-default-run
+Description: MPI vector operations library (SUNDIALS library)
+ This package provides implementations for all vector operations
+ defined by the generic NVECTOR module in the table of operations for
+ SUNDIALS (SUite of Nonlinear and DIfferential/ALgebraic equation
+ Solvers).
+
+Package: libsundials-serial-dev
+Section: libdevel
+Architecture: any
+Depends: libsundials-serial (= ${binary:Version}), ${misc:Depends},
+ libblas-dev | libatlas-base-dev | libopenblas-dev,
+ liblapack-dev | libatlas-base-dev
+Recommends: libsundials-serial-dbg
+Description: SUNDIALS development files
+ The family of solvers referred to as SUNDIALS (SUite of Nonlinear and
+ DIfferential/ALgebraic equation Solvers) consists of solvers CVODE
+ (for ODE systems), CVODES (ODE with sensitivity analysis capabilities),
+ IDA (for differential-algebraic systems), and KINSOL (for nonlinear
+ algebraic systems).
+ .
+ This package contains files necessary for development applications using
+ SUNDIALS in C and, in case of FCVODE and FKINSOL, Fortran. It also
+ contains various example programs distributed by the upstream authors.
+
+Package: libsundials-nvecparallel-dev
+Section: libdevel
+Architecture: any
+Depends: libsundials-nvecparallel0 (= ${binary:Version}), ${misc:Depends}
+Description: MPI vector operations library (SUNDIALS library)
+ This package provides implementations for all vector operations
+ defined by the generic NVECTOR module in the table of operations for
+ SUNDIALS (SUite of Nonlinear and DIfferential/ALgebraic equation
+ Solvers).
+ .
+ This package contains files necessary for development applications using
+ SUNDIALS in C and, in case of FCVODE and FKINSOL, Fortran. It also
+ contains various example programs distributed by the upstream authors.
+ .
+ This package provides MPI version
+
+Package: libsundials-doc
+Section: doc
+Architecture: all
+Depends: ${misc:Depends}
+Recommends: libsundials-serial-dev
+Description: SUNDIALS examples files
+ The family of solvers referred to as SUNDIALS (SUite of Nonlinear and
+ DIfferential/ALgebraic equation Solvers) consists of solvers CVODE
+ (for ODE systems), CVODES (ODE with sensitivity analysis capabilities),
+ IDA (for differential-algebraic systems), and KINSOL (for nonlinear
+ algebraic systems).
+ .
+ This package contains SUNDIALS examples.
+
+Package: octave-sundials
+Architecture: any
+Depends: ${misc:Depends}, ${shlibs:Depends}, octave
+Recommends: libsundials-serial-dev
+Description: SUNDIALS for octave
+ The family of solvers referred to as SUNDIALS (SUite of Nonlinear and
+ DIfferential/ALgebraic equation Solvers) consists of solvers CVODE
+ (for ODE systems), CVODES (ODE with sensitivity analysis capabilities),
+ IDA (for differential-algebraic systems), and KINSOL (for nonlinear
+ algebraic systems).
+ .
+ This package contains SUNDIALS plugins for octave.
+
+Package: libsundials-serial-dbg
+Section: debug
+Architecture: any
+Priority: extra
+Depends: libsundials-serial, ${misc:Depends}
+Description: SUite of Nonlinear and DIfferential/ALgebraic equation Solvers
+ The family of solvers referred to as SUNDIALS consists of solvers CVODE
+ (for ODE systems), CVODES (ODE with sensitivity analysis capabilities),
+ IDA (for differential-algebraic systems), and KINSOL (for nonlinear
+ algebraic systems).
+ .
+ This package contains the debugging symbols for SUNDIALS.
+
+Package: libsundials-nvecparallel-dbg
+Section: debug
+Architecture: any
+Priority: extra
+Depends: libsundials-nvecparallel0 (= ${binary:Version}), ${misc:Depends}
+Description: MPI vector operations library (SUNDIALS library)
+ This package provides implementations for all vector operations
+ defined by the generic NVECTOR module in the table of operations for
+ SUNDIALS (SUite of Nonlinear and DIfferential/ALgebraic equation
+ Solvers).
+ .
+ This package contains files necessary for development applications using
+ SUNDIALS in C and, in case of FCVODE and FKINSOL, Fortran. It also
+ contains various example programs distributed by the upstream authors.
+ .
+ This package contains the debugging symbols.
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..98cde97
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,71 @@
+This package was debianized by Andrey Romanenko <andrey at enginum.com> on
+Wed, 20 Apr 2005 12:01:42 +0100.
+
+It was downloaded from http://www.llnl.gov/CASC/sundials/
+
+Authors: Peter Brown, Aaron Collier, Keith Grant, Alan Hindmarsh,
+ Steve Lee, Radu Serban, Dan Shumaker, Carol Woodward
+
+Copyright Holder: The Regents of the University of California.
+
+License:
+
+Copyright (c) 2002, The Regents of the University of California.
+Produced at the Lawrence Livermore National Laboratory
+Written by A.C. Hindmarsh and R. Serban.
+UCRL-CODE-155950
+All rights reserved.
+
+This file is part of CVODES v2.1.0.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the disclaimer below.
+
+2. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the disclaimer (as noted below)
+in the documentation and/or other materials provided with the
+distribution.
+
+3. Neither the name of the UC/LLNL nor the names of its contributors
+may be used to endorse or promote products derived from this software
+without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+REGENTS OF THE UNIVERSITY OF CALIFORNIA, THE U.S. DEPARTMENT OF ENERGY
+OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Additional BSD Notice
+---------------------
+1. This notice is required to be provided under our contract with
+the U.S. Department of Energy (DOE). This work was produced at the
+University of California, Lawrence Livermore National Laboratory
+under Contract No. W-7405-ENG-48 with the DOE.
+
+2. Neither the United States Government nor the University of
+California nor any of their employees, makes any warranty, express
+or implied, or assumes any liability or responsibility for the
+accuracy, completeness, or usefulness of any information, apparatus,
+product, or process disclosed, or represents that its use would not
+infringe privately-owned rights.
+
+3. Also, reference herein to any specific commercial products,
+process, or services by trade name, trademark, manufacturer or
+otherwise does not necessarily constitute or imply its endorsement,
+recommendation, or favoring by the United States Government or the
+University of California. The views and opinions of authors expressed
+herein do not necessarily state or reflect those of the United States
+Government or the University of California, and shall not be used for
+advertising or product endorsement purposes.
diff --git a/debian/docs b/debian/docs
new file mode 100644
index 0000000..e845566
--- /dev/null
+++ b/debian/docs
@@ -0,0 +1 @@
+README
diff --git a/debian/libsundials-cvode1.install b/debian/libsundials-cvode1.install
new file mode 100644
index 0000000..51e86a6
--- /dev/null
+++ b/debian/libsundials-cvode1.install
@@ -0,0 +1 @@
+usr/lib/libsundials_cvode.so.*
diff --git a/debian/libsundials-cvode1.symbols b/debian/libsundials-cvode1.symbols
new file mode 100644
index 0000000..e918f19
--- /dev/null
+++ b/debian/libsundials-cvode1.symbols
@@ -0,0 +1,189 @@
+libsundials_cvode.so.1 libsundials-cvode1 #MINVER#
+ AddIdentity at Base 2.5.0
+ BandCopy at Base 2.5.0
+ BandGBTRF at Base 2.5.0
+ BandGBTRS at Base 2.5.0
+ BandScale at Base 2.5.0
+ CVBBDPrecGetNumGfnEvals at Base 2.5.0
+ CVBBDPrecGetWorkSpace at Base 2.5.0
+ CVBBDPrecInit at Base 2.5.0
+ CVBBDPrecReInit at Base 2.5.0
+ CVBand at Base 2.5.0
+ CVBandPrecGetNumRhsEvals at Base 2.5.0
+ CVBandPrecGetWorkSpace at Base 2.5.0
+ CVBandPrecInit at Base 2.5.0
+ CVDense at Base 2.5.0
+ CVDiag at Base 2.5.0
+ CVDiagGetLastFlag at Base 2.5.0
+ CVDiagGetNumRhsEvals at Base 2.5.0
+ CVDiagGetReturnFlagName at Base 2.5.0
+ CVDiagGetWorkSpace at Base 2.5.0
+ CVDlsGetLastFlag at Base 2.5.0
+ CVDlsGetNumJacEvals at Base 2.5.0
+ CVDlsGetNumRhsEvals at Base 2.5.0
+ CVDlsGetReturnFlagName at Base 2.5.0
+ CVDlsGetWorkSpace at Base 2.5.0
+ CVDlsSetBandJacFn at Base 2.5.0
+ CVDlsSetDenseJacFn at Base 2.5.0
+ CVErrHandler at Base 2.5.0
+ CVEwtSet at Base 2.5.0
+ CVLapackBand at Base 2.5.0
+ CVLapackDense at Base 2.5.0
+ CVProcessError at Base 2.5.0
+ CVSpbcg at Base 2.5.0
+ CVSpgmr at Base 2.5.0
+ CVSpilsAtimes at Base 2.5.0
+ CVSpilsDQJtimes at Base 2.5.0
+ CVSpilsGetLastFlag at Base 2.5.0
+ CVSpilsGetNumConvFails at Base 2.5.0
+ CVSpilsGetNumJtimesEvals at Base 2.5.0
+ CVSpilsGetNumLinIters at Base 2.5.0
+ CVSpilsGetNumPrecEvals at Base 2.5.0
+ CVSpilsGetNumPrecSolves at Base 2.5.0
+ CVSpilsGetNumRhsEvals at Base 2.5.0
+ CVSpilsGetReturnFlagName at Base 2.5.0
+ CVSpilsGetWorkSpace at Base 2.5.0
+ CVSpilsPSolve at Base 2.5.0
+ CVSpilsSetEpsLin at Base 2.5.0
+ CVSpilsSetGSType at Base 2.5.0
+ CVSpilsSetJacTimesVecFn at Base 2.5.0
+ CVSpilsSetMaxl at Base 2.5.0
+ CVSpilsSetPrecType at Base 2.5.0
+ CVSpilsSetPreconditioner at Base 2.5.0
+ CVSptfqmr at Base 2.5.0
+ CVode at Base 2.5.0
+ CVodeCreate at Base 2.5.0
+ CVodeFree at Base 2.5.0
+ CVodeGetActualInitStep at Base 2.5.0
+ CVodeGetCurrentOrder at Base 2.5.0
+ CVodeGetCurrentStep at Base 2.5.0
+ CVodeGetCurrentTime at Base 2.5.0
+ CVodeGetDky at Base 2.5.0
+ CVodeGetErrWeights at Base 2.5.0
+ CVodeGetEstLocalErrors at Base 2.5.0
+ CVodeGetIntegratorStats at Base 2.5.0
+ CVodeGetLastOrder at Base 2.5.0
+ CVodeGetLastStep at Base 2.5.0
+ CVodeGetNonlinSolvStats at Base 2.5.0
+ CVodeGetNumErrTestFails at Base 2.5.0
+ CVodeGetNumGEvals at Base 2.5.0
+ CVodeGetNumLinSolvSetups at Base 2.5.0
+ CVodeGetNumNonlinSolvConvFails at Base 2.5.0
+ CVodeGetNumNonlinSolvIters at Base 2.5.0
+ CVodeGetNumRhsEvals at Base 2.5.0
+ CVodeGetNumStabLimOrderReds at Base 2.5.0
+ CVodeGetNumSteps at Base 2.5.0
+ CVodeGetReturnFlagName at Base 2.5.0
+ CVodeGetRootInfo at Base 2.5.0
+ CVodeGetTolScaleFactor at Base 2.5.0
+ CVodeGetWorkSpace at Base 2.5.0
+ CVodeInit at Base 2.5.0
+ CVodeReInit at Base 2.5.0
+ CVodeRootInit at Base 2.5.0
+ CVodeSStolerances at Base 2.5.0
+ CVodeSVtolerances at Base 2.5.0
+ CVodeSetErrFile at Base 2.5.0
+ CVodeSetErrHandlerFn at Base 2.5.0
+ CVodeSetInitStep at Base 2.5.0
+ CVodeSetIterType at Base 2.5.0
+ CVodeSetMaxConvFails at Base 2.5.0
+ CVodeSetMaxErrTestFails at Base 2.5.0
+ CVodeSetMaxHnilWarns at Base 2.5.0
+ CVodeSetMaxNonlinIters at Base 2.5.0
+ CVodeSetMaxNumSteps at Base 2.5.0
+ CVodeSetMaxOrd at Base 2.5.0
+ CVodeSetMaxStep at Base 2.5.0
+ CVodeSetMinStep at Base 2.5.0
+ CVodeSetNoInactiveRootWarn at Base 2.5.0
+ CVodeSetNonlinConvCoef at Base 2.5.0
+ CVodeSetRootDirection at Base 2.5.0
+ CVodeSetStabLimDet at Base 2.5.0
+ CVodeSetStopTime at Base 2.5.0
+ CVodeSetUserData at Base 2.5.0
+ CVodeWFtolerances at Base 2.5.0
+ ClassicalGS at Base 2.5.0
+ DenseCopy at Base 2.5.0
+ DenseGEQRF at Base 2.5.0
+ DenseGETRF at Base 2.5.0
+ DenseGETRS at Base 2.5.0
+ DenseORMQR at Base 2.5.0
+ DensePOTRF at Base 2.5.0
+ DensePOTRS at Base 2.5.0
+ DenseScale at Base 2.5.0
+ DestroyArray at Base 2.5.0
+ DestroyMat at Base 2.5.0
+ ModifiedGS at Base 2.5.0
+ N_VAbs at Base 2.5.0
+ N_VAddConst at Base 2.5.0
+ N_VClone at Base 2.5.0
+ N_VCloneEmpty at Base 2.5.0
+ N_VCloneEmptyVectorArray at Base 2.5.0
+ N_VCloneVectorArray at Base 2.5.0
+ N_VCompare at Base 2.5.0
+ N_VConst at Base 2.5.0
+ N_VConstrMask at Base 2.5.0
+ N_VDestroy at Base 2.5.0
+ N_VDestroyVectorArray at Base 2.5.0
+ N_VDiv at Base 2.5.0
+ N_VDotProd at Base 2.5.0
+ N_VGetArrayPointer at Base 2.5.0
+ N_VInv at Base 2.5.0
+ N_VInvTest at Base 2.5.0
+ N_VL1Norm at Base 2.5.0
+ N_VLinearSum at Base 2.5.0
+ N_VMaxNorm at Base 2.5.0
+ N_VMin at Base 2.5.0
+ N_VMinQuotient at Base 2.5.0
+ N_VProd at Base 2.5.0
+ N_VScale at Base 2.5.0
+ N_VSetArrayPointer at Base 2.5.0
+ N_VSpace at Base 2.5.0
+ N_VWL2Norm at Base 2.5.0
+ N_VWrmsNorm at Base 2.5.0
+ N_VWrmsNormMask at Base 2.5.0
+ NewBandMat at Base 2.5.0
+ NewDenseMat at Base 2.5.0
+ NewIntArray at Base 2.5.0
+ NewLintArray at Base 2.5.0
+ NewRealArray at Base 2.5.0
+ PrintMat at Base 2.5.0
+ QRfact at Base 2.5.0
+ QRsol at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+ SetToZero at Base 2.5.0
+ SpbcgFree at Base 2.5.0
+ SpbcgMalloc at Base 2.5.0
+ SpbcgSolve at Base 2.5.0
+ SpgmrFree at Base 2.5.0
+ SpgmrMalloc at Base 2.5.0
+ SpgmrSolve at Base 2.5.0
+ SptfqmrFree at Base 2.5.0
+ SptfqmrMalloc at Base 2.5.0
+ SptfqmrSolve at Base 2.5.0
+ bandAddIdentity at Base 2.5.0
+ bandCopy at Base 2.5.0
+ bandGBTRF at Base 2.5.0
+ bandGBTRS at Base 2.5.0
+ bandScale at Base 2.5.0
+ cvDlsBandDQJac at Base 2.5.0
+ cvDlsDenseDQJac at Base 2.5.0
+ denseAddIdentity at Base 2.5.0
+ denseCopy at Base 2.5.0
+ denseGEQRF at Base 2.5.0
+ denseGETRF at Base 2.5.0
+ denseGETRS at Base 2.5.0
+ denseORMQR at Base 2.5.0
+ densePOTRF at Base 2.5.0
+ densePOTRS at Base 2.5.0
+ denseScale at Base 2.5.0
+ destroyArray at Base 2.5.0
+ destroyMat at Base 2.5.0
+ newBandMat at Base 2.5.0
+ newDenseMat at Base 2.5.0
+ newIntArray at Base 2.5.0
+ newLintArray at Base 2.5.0
+ newRealArray at Base 2.5.0
diff --git a/debian/libsundials-cvodes2.install b/debian/libsundials-cvodes2.install
new file mode 100644
index 0000000..1c26287
--- /dev/null
+++ b/debian/libsundials-cvodes2.install
@@ -0,0 +1 @@
+usr/lib/libsundials_cvodes.so.*
diff --git a/debian/libsundials-cvodes2.symbols b/debian/libsundials-cvodes2.symbols
new file mode 100644
index 0000000..99e5185
--- /dev/null
+++ b/debian/libsundials-cvodes2.symbols
@@ -0,0 +1,300 @@
+libsundials_cvodes.so.2 libsundials-cvodes2 #MINVER#
+ AddIdentity at Base 2.5.0
+ BandCopy at Base 2.5.0
+ BandGBTRF at Base 2.5.0
+ BandGBTRS at Base 2.5.0
+ BandScale at Base 2.5.0
+ CVBBDPrecGetNumGfnEvals at Base 2.5.0
+ CVBBDPrecGetWorkSpace at Base 2.5.0
+ CVBBDPrecInit at Base 2.5.0
+ CVBBDPrecInitB at Base 2.5.0
+ CVBBDPrecReInit at Base 2.5.0
+ CVBBDPrecReInitB at Base 2.5.0
+ CVBand at Base 2.5.0
+ CVBandB at Base 2.5.0
+ CVBandPrecGetNumRhsEvals at Base 2.5.0
+ CVBandPrecGetWorkSpace at Base 2.5.0
+ CVBandPrecInit at Base 2.5.0
+ CVBandPrecInitB at Base 2.5.0
+ CVDense at Base 2.5.0
+ CVDenseB at Base 2.5.0
+ CVDiag at Base 2.5.0
+ CVDiagB at Base 2.5.0
+ CVDiagGetLastFlag at Base 2.5.0
+ CVDiagGetNumRhsEvals at Base 2.5.0
+ CVDiagGetReturnFlagName at Base 2.5.0
+ CVDiagGetWorkSpace at Base 2.5.0
+ CVDlsGetLastFlag at Base 2.5.0
+ CVDlsGetNumJacEvals at Base 2.5.0
+ CVDlsGetNumRhsEvals at Base 2.5.0
+ CVDlsGetReturnFlagName at Base 2.5.0
+ CVDlsGetWorkSpace at Base 2.5.0
+ CVDlsSetBandJacFn at Base 2.5.0
+ CVDlsSetBandJacFnB at Base 2.5.0
+ CVDlsSetDenseJacFn at Base 2.5.0
+ CVDlsSetDenseJacFnB at Base 2.5.0
+ CVLapackBand at Base 2.5.0
+ CVLapackBandB at Base 2.5.0
+ CVLapackDense at Base 2.5.0
+ CVLapackDenseB at Base 2.5.0
+ CVSpbcg at Base 2.5.0
+ CVSpbcgB at Base 2.5.0
+ CVSpgmr at Base 2.5.0
+ CVSpgmrB at Base 2.5.0
+ CVSpilsAtimes at Base 2.5.0
+ CVSpilsDQJtimes at Base 2.5.0
+ CVSpilsGetLastFlag at Base 2.5.0
+ CVSpilsGetNumConvFails at Base 2.5.0
+ CVSpilsGetNumJtimesEvals at Base 2.5.0
+ CVSpilsGetNumLinIters at Base 2.5.0
+ CVSpilsGetNumPrecEvals at Base 2.5.0
+ CVSpilsGetNumPrecSolves at Base 2.5.0
+ CVSpilsGetNumRhsEvals at Base 2.5.0
+ CVSpilsGetReturnFlagName at Base 2.5.0
+ CVSpilsGetWorkSpace at Base 2.5.0
+ CVSpilsPSolve at Base 2.5.0
+ CVSpilsSetEpsLin at Base 2.5.0
+ CVSpilsSetEpsLinB at Base 2.5.0
+ CVSpilsSetGSType at Base 2.5.0
+ CVSpilsSetGSTypeB at Base 2.5.0
+ CVSpilsSetJacTimesVecFn at Base 2.5.0
+ CVSpilsSetJacTimesVecFnB at Base 2.5.0
+ CVSpilsSetMaxl at Base 2.5.0
+ CVSpilsSetMaxlB at Base 2.5.0
+ CVSpilsSetPrecType at Base 2.5.0
+ CVSpilsSetPrecTypeB at Base 2.5.0
+ CVSpilsSetPreconditioner at Base 2.5.0
+ CVSpilsSetPreconditionerB at Base 2.5.0
+ CVSptfqmr at Base 2.5.0
+ CVSptfqmrB at Base 2.5.0
+ CVode at Base 2.5.0
+ CVodeAdjFree at Base 2.5.0
+ CVodeAdjInit at Base 2.5.0
+ CVodeAdjReInit at Base 2.5.0
+ CVodeB at Base 2.5.0
+ CVodeCreate at Base 2.5.0
+ CVodeCreateB at Base 2.5.0
+ CVodeF at Base 2.5.0
+ CVodeFree at Base 2.5.0
+ CVodeGetActualInitStep at Base 2.5.0
+ CVodeGetAdjCVodeBmem at Base 2.5.0
+ CVodeGetAdjCheckPointsInfo at Base 2.5.0
+ CVodeGetAdjCurrentCheckPoint at Base 2.5.0
+ CVodeGetAdjDataPointHermite at Base 2.5.0
+ CVodeGetAdjDataPointPolynomial at Base 2.5.0
+ CVodeGetAdjY at Base 2.5.0
+ CVodeGetB at Base 2.5.0
+ CVodeGetCurrentOrder at Base 2.5.0
+ CVodeGetCurrentStep at Base 2.5.0
+ CVodeGetCurrentTime at Base 2.5.0
+ CVodeGetDky at Base 2.5.0
+ CVodeGetErrWeights at Base 2.5.0
+ CVodeGetEstLocalErrors at Base 2.5.0
+ CVodeGetIntegratorStats at Base 2.5.0
+ CVodeGetLastOrder at Base 2.5.0
+ CVodeGetLastStep at Base 2.5.0
+ CVodeGetNonlinSolvStats at Base 2.5.0
+ CVodeGetNumErrTestFails at Base 2.5.0
+ CVodeGetNumGEvals at Base 2.5.0
+ CVodeGetNumLinSolvSetups at Base 2.5.0
+ CVodeGetNumNonlinSolvConvFails at Base 2.5.0
+ CVodeGetNumNonlinSolvIters at Base 2.5.0
+ CVodeGetNumRhsEvals at Base 2.5.0
+ CVodeGetNumRhsEvalsSens at Base 2.5.0
+ CVodeGetNumStabLimOrderReds at Base 2.5.0
+ CVodeGetNumSteps at Base 2.5.0
+ CVodeGetQuad at Base 2.5.0
+ CVodeGetQuadB at Base 2.5.0
+ CVodeGetQuadDky at Base 2.5.0
+ CVodeGetQuadErrWeights at Base 2.5.0
+ CVodeGetQuadNumErrTestFails at Base 2.5.0
+ CVodeGetQuadNumRhsEvals at Base 2.5.0
+ CVodeGetQuadSens1 at Base 2.5.0
+ CVodeGetQuadSens at Base 2.5.0
+ CVodeGetQuadSensDky1 at Base 2.5.0
+ CVodeGetQuadSensDky at Base 2.5.0
+ CVodeGetQuadSensErrWeights at Base 2.5.0
+ CVodeGetQuadSensNumErrTestFails at Base 2.5.0
+ CVodeGetQuadSensNumRhsEvals at Base 2.5.0
+ CVodeGetQuadSensStats at Base 2.5.0
+ CVodeGetQuadStats at Base 2.5.0
+ CVodeGetReturnFlagName at Base 2.5.0
+ CVodeGetRootInfo at Base 2.5.0
+ CVodeGetSens1 at Base 2.5.0
+ CVodeGetSens at Base 2.5.0
+ CVodeGetSensDky1 at Base 2.5.0
+ CVodeGetSensDky at Base 2.5.0
+ CVodeGetSensErrWeights at Base 2.5.0
+ CVodeGetSensNonlinSolvStats at Base 2.5.0
+ CVodeGetSensNumErrTestFails at Base 2.5.0
+ CVodeGetSensNumLinSolvSetups at Base 2.5.0
+ CVodeGetSensNumNonlinSolvConvFails at Base 2.5.0
+ CVodeGetSensNumNonlinSolvIters at Base 2.5.0
+ CVodeGetSensNumRhsEvals at Base 2.5.0
+ CVodeGetSensStats at Base 2.5.0
+ CVodeGetStgrSensNumNonlinSolvConvFails at Base 2.5.0
+ CVodeGetStgrSensNumNonlinSolvIters at Base 2.5.0
+ CVodeGetTolScaleFactor at Base 2.5.0
+ CVodeGetWorkSpace at Base 2.5.0
+ CVodeInit at Base 2.5.0
+ CVodeInitB at Base 2.5.0
+ CVodeInitBS at Base 2.5.0
+ CVodeQuadFree at Base 2.5.0
+ CVodeQuadInit at Base 2.5.0
+ CVodeQuadInitB at Base 2.5.0
+ CVodeQuadInitBS at Base 2.5.0
+ CVodeQuadReInit at Base 2.5.0
+ CVodeQuadReInitB at Base 2.5.0
+ CVodeQuadSStolerances at Base 2.5.0
+ CVodeQuadSStolerancesB at Base 2.5.0
+ CVodeQuadSVtolerances at Base 2.5.0
+ CVodeQuadSVtolerancesB at Base 2.5.0
+ CVodeQuadSensEEtolerances at Base 2.5.0
+ CVodeQuadSensFree at Base 2.5.0
+ CVodeQuadSensInit at Base 2.5.0
+ CVodeQuadSensReInit at Base 2.5.0
+ CVodeQuadSensSStolerances at Base 2.5.0
+ CVodeQuadSensSVtolerances at Base 2.5.0
+ CVodeReInit at Base 2.5.0
+ CVodeReInitB at Base 2.5.0
+ CVodeRootInit at Base 2.5.0
+ CVodeSStolerances at Base 2.5.0
+ CVodeSStolerancesB at Base 2.5.0
+ CVodeSVtolerances at Base 2.5.0
+ CVodeSVtolerancesB at Base 2.5.0
+ CVodeSensEEtolerances at Base 2.5.0
+ CVodeSensFree at Base 2.5.0
+ CVodeSensInit1 at Base 2.5.0
+ CVodeSensInit at Base 2.5.0
+ CVodeSensReInit at Base 2.5.0
+ CVodeSensSStolerances at Base 2.5.0
+ CVodeSensSVtolerances at Base 2.5.0
+ CVodeSensToggleOff at Base 2.5.0
+ CVodeSetAdjNoSensi at Base 2.5.0
+ CVodeSetErrFile at Base 2.5.0
+ CVodeSetErrHandlerFn at Base 2.5.0
+ CVodeSetInitStep at Base 2.5.0
+ CVodeSetInitStepB at Base 2.5.0
+ CVodeSetIterType at Base 2.5.0
+ CVodeSetIterTypeB at Base 2.5.0
+ CVodeSetMaxConvFails at Base 2.5.0
+ CVodeSetMaxErrTestFails at Base 2.5.0
+ CVodeSetMaxHnilWarns at Base 2.5.0
+ CVodeSetMaxNonlinIters at Base 2.5.0
+ CVodeSetMaxNumSteps at Base 2.5.0
+ CVodeSetMaxNumStepsB at Base 2.5.0
+ CVodeSetMaxOrd at Base 2.5.0
+ CVodeSetMaxOrdB at Base 2.5.0
+ CVodeSetMaxStep at Base 2.5.0
+ CVodeSetMaxStepB at Base 2.5.0
+ CVodeSetMinStep at Base 2.5.0
+ CVodeSetMinStepB at Base 2.5.0
+ CVodeSetNoInactiveRootWarn at Base 2.5.0
+ CVodeSetNonlinConvCoef at Base 2.5.0
+ CVodeSetQuadErrCon at Base 2.5.0
+ CVodeSetQuadErrConB at Base 2.5.0
+ CVodeSetQuadSensErrCon at Base 2.5.0
+ CVodeSetRootDirection at Base 2.5.0
+ CVodeSetSensDQMethod at Base 2.5.0
+ CVodeSetSensErrCon at Base 2.5.0
+ CVodeSetSensMaxNonlinIters at Base 2.5.0
+ CVodeSetSensParams at Base 2.5.0
+ CVodeSetStabLimDet at Base 2.5.0
+ CVodeSetStabLimDetB at Base 2.5.0
+ CVodeSetStopTime at Base 2.5.0
+ CVodeSetUserData at Base 2.5.0
+ CVodeSetUserDataB at Base 2.5.0
+ CVodeWFtolerances at Base 2.5.0
+ ClassicalGS at Base 2.5.0
+ DenseCopy at Base 2.5.0
+ DenseGEQRF at Base 2.5.0
+ DenseGETRF at Base 2.5.0
+ DenseGETRS at Base 2.5.0
+ DenseORMQR at Base 2.5.0
+ DensePOTRF at Base 2.5.0
+ DensePOTRS at Base 2.5.0
+ DenseScale at Base 2.5.0
+ DestroyArray at Base 2.5.0
+ DestroyMat at Base 2.5.0
+ ModifiedGS at Base 2.5.0
+ N_VAbs at Base 2.5.0
+ N_VAddConst at Base 2.5.0
+ N_VClone at Base 2.5.0
+ N_VCloneEmpty at Base 2.5.0
+ N_VCloneEmptyVectorArray at Base 2.5.0
+ N_VCloneVectorArray at Base 2.5.0
+ N_VCompare at Base 2.5.0
+ N_VConst at Base 2.5.0
+ N_VConstrMask at Base 2.5.0
+ N_VDestroy at Base 2.5.0
+ N_VDestroyVectorArray at Base 2.5.0
+ N_VDiv at Base 2.5.0
+ N_VDotProd at Base 2.5.0
+ N_VGetArrayPointer at Base 2.5.0
+ N_VInv at Base 2.5.0
+ N_VInvTest at Base 2.5.0
+ N_VL1Norm at Base 2.5.0
+ N_VLinearSum at Base 2.5.0
+ N_VMaxNorm at Base 2.5.0
+ N_VMin at Base 2.5.0
+ N_VMinQuotient at Base 2.5.0
+ N_VProd at Base 2.5.0
+ N_VScale at Base 2.5.0
+ N_VSetArrayPointer at Base 2.5.0
+ N_VSpace at Base 2.5.0
+ N_VWL2Norm at Base 2.5.0
+ N_VWrmsNorm at Base 2.5.0
+ N_VWrmsNormMask at Base 2.5.0
+ NewBandMat at Base 2.5.0
+ NewDenseMat at Base 2.5.0
+ NewIntArray at Base 2.5.0
+ NewLintArray at Base 2.5.0
+ NewRealArray at Base 2.5.0
+ PrintMat at Base 2.5.0
+ QRfact at Base 2.5.0
+ QRsol at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+ SetToZero at Base 2.5.0
+ SpbcgFree at Base 2.5.0
+ SpbcgMalloc at Base 2.5.0
+ SpbcgSolve at Base 2.5.0
+ SpgmrFree at Base 2.5.0
+ SpgmrMalloc at Base 2.5.0
+ SpgmrSolve at Base 2.5.0
+ SptfqmrFree at Base 2.5.0
+ SptfqmrMalloc at Base 2.5.0
+ SptfqmrSolve at Base 2.5.0
+ bandAddIdentity at Base 2.5.0
+ bandCopy at Base 2.5.0
+ bandGBTRF at Base 2.5.0
+ bandGBTRS at Base 2.5.0
+ bandScale at Base 2.5.0
+ cvDlsBandDQJac at Base 2.5.0
+ cvDlsDenseDQJac at Base 2.5.0
+ cvErrHandler at Base 2.5.0
+ cvEwtSet at Base 2.5.0
+ cvProcessError at Base 2.5.0
+ cvSensRhs1InternalDQ at Base 2.5.0
+ cvSensRhs1Wrapper at Base 2.5.0
+ cvSensRhsInternalDQ at Base 2.5.0
+ cvSensRhsWrapper at Base 2.5.0
+ denseAddIdentity at Base 2.5.0
+ denseCopy at Base 2.5.0
+ denseGEQRF at Base 2.5.0
+ denseGETRF at Base 2.5.0
+ denseGETRS at Base 2.5.0
+ denseORMQR at Base 2.5.0
+ densePOTRF at Base 2.5.0
+ densePOTRS at Base 2.5.0
+ denseScale at Base 2.5.0
+ destroyArray at Base 2.5.0
+ destroyMat at Base 2.5.0
+ newBandMat at Base 2.5.0
+ newDenseMat at Base 2.5.0
+ newIntArray at Base 2.5.0
+ newLintArray at Base 2.5.0
+ newRealArray at Base 2.5.0
diff --git a/debian/libsundials-doc.install b/debian/libsundials-doc.install
new file mode 100644
index 0000000..c857f66
--- /dev/null
+++ b/debian/libsundials-doc.install
@@ -0,0 +1 @@
+examples usr/share/doc/libsundials-doc
diff --git a/debian/libsundials-ida2.install b/debian/libsundials-ida2.install
new file mode 100644
index 0000000..c3066dd
--- /dev/null
+++ b/debian/libsundials-ida2.install
@@ -0,0 +1 @@
+usr/lib/libsundials_ida.so.*
diff --git a/debian/libsundials-ida2.symbols b/debian/libsundials-ida2.symbols
new file mode 100644
index 0000000..4773f09
--- /dev/null
+++ b/debian/libsundials-ida2.symbols
@@ -0,0 +1,192 @@
+libsundials_ida.so.2 libsundials-ida2 #MINVER#
+ AddIdentity at Base 2.5.0
+ BandCopy at Base 2.5.0
+ BandGBTRF at Base 2.5.0
+ BandGBTRS at Base 2.5.0
+ BandScale at Base 2.5.0
+ ClassicalGS at Base 2.5.0
+ DenseCopy at Base 2.5.0
+ DenseGEQRF at Base 2.5.0
+ DenseGETRF at Base 2.5.0
+ DenseGETRS at Base 2.5.0
+ DenseORMQR at Base 2.5.0
+ DensePOTRF at Base 2.5.0
+ DensePOTRS at Base 2.5.0
+ DenseScale at Base 2.5.0
+ DestroyArray at Base 2.5.0
+ DestroyMat at Base 2.5.0
+ IDABBDPrecGetNumGfnEvals at Base 2.5.0
+ IDABBDPrecGetWorkSpace at Base 2.5.0
+ IDABBDPrecInit at Base 2.5.0
+ IDABBDPrecReInit at Base 2.5.0
+ IDABand at Base 2.5.0
+ IDACalcIC at Base 2.5.0
+ IDACreate at Base 2.5.0
+ IDADense at Base 2.5.0
+ IDADlsGetLastFlag at Base 2.5.0
+ IDADlsGetNumJacEvals at Base 2.5.0
+ IDADlsGetNumResEvals at Base 2.5.0
+ IDADlsGetReturnFlagName at Base 2.5.0
+ IDADlsGetWorkSpace at Base 2.5.0
+ IDADlsSetBandJacFn at Base 2.5.0
+ IDADlsSetDenseJacFn at Base 2.5.0
+ IDAErrHandler at Base 2.5.0
+ IDAEwtSet at Base 2.5.0
+ IDAFree at Base 2.5.0
+ IDAGetActualInitStep at Base 2.5.0
+ IDAGetConsistentIC at Base 2.5.0
+ IDAGetCurrentOrder at Base 2.5.0
+ IDAGetCurrentStep at Base 2.5.0
+ IDAGetCurrentTime at Base 2.5.0
+ IDAGetDky at Base 2.5.0
+ IDAGetErrWeights at Base 2.5.0
+ IDAGetEstLocalErrors at Base 2.5.0
+ IDAGetIntegratorStats at Base 2.5.0
+ IDAGetLastOrder at Base 2.5.0
+ IDAGetLastStep at Base 2.5.0
+ IDAGetNonlinSolvStats at Base 2.5.0
+ IDAGetNumBacktrackOps at Base 2.5.0
+ IDAGetNumErrTestFails at Base 2.5.0
+ IDAGetNumGEvals at Base 2.5.0
+ IDAGetNumLinSolvSetups at Base 2.5.0
+ IDAGetNumNonlinSolvConvFails at Base 2.5.0
+ IDAGetNumNonlinSolvIters at Base 2.5.0
+ IDAGetNumResEvals at Base 2.5.0
+ IDAGetNumSteps at Base 2.5.0
+ IDAGetReturnFlagName at Base 2.5.0
+ IDAGetRootInfo at Base 2.5.0
+ IDAGetSolution at Base 2.5.0
+ IDAGetTolScaleFactor at Base 2.5.0
+ IDAGetWorkSpace at Base 2.5.0
+ IDAInit at Base 2.5.0
+ IDAInitialSetup at Base 2.5.0
+ IDALapackBand at Base 2.5.0
+ IDALapackDense at Base 2.5.0
+ IDAProcessError at Base 2.5.0
+ IDAReInit at Base 2.5.0
+ IDARootInit at Base 2.5.0
+ IDASStolerances at Base 2.5.0
+ IDASVtolerances at Base 2.5.0
+ IDASetConstraints at Base 2.5.0
+ IDASetErrFile at Base 2.5.0
+ IDASetErrHandlerFn at Base 2.5.0
+ IDASetId at Base 2.5.0
+ IDASetInitStep at Base 2.5.0
+ IDASetLineSearchOffIC at Base 2.5.0
+ IDASetMaxConvFails at Base 2.5.0
+ IDASetMaxErrTestFails at Base 2.5.0
+ IDASetMaxNonlinIters at Base 2.5.0
+ IDASetMaxNumItersIC at Base 2.5.0
+ IDASetMaxNumJacsIC at Base 2.5.0
+ IDASetMaxNumSteps at Base 2.5.0
+ IDASetMaxNumStepsIC at Base 2.5.0
+ IDASetMaxOrd at Base 2.5.0
+ IDASetMaxStep at Base 2.5.0
+ IDASetNoInactiveRootWarn at Base 2.5.0
+ IDASetNonlinConvCoef at Base 2.5.0
+ IDASetNonlinConvCoefIC at Base 2.5.0
+ IDASetRootDirection at Base 2.5.0
+ IDASetStepToleranceIC at Base 2.5.0
+ IDASetStopTime at Base 2.5.0
+ IDASetSuppressAlg at Base 2.5.0
+ IDASetUserData at Base 2.5.0
+ IDASolve at Base 2.5.0
+ IDASpbcg at Base 2.5.0
+ IDASpgmr at Base 2.5.0
+ IDASpilsAtimes at Base 2.5.0
+ IDASpilsDQJtimes at Base 2.5.0
+ IDASpilsGetLastFlag at Base 2.5.0
+ IDASpilsGetNumConvFails at Base 2.5.0
+ IDASpilsGetNumJtimesEvals at Base 2.5.0
+ IDASpilsGetNumLinIters at Base 2.5.0
+ IDASpilsGetNumPrecEvals at Base 2.5.0
+ IDASpilsGetNumPrecSolves at Base 2.5.0
+ IDASpilsGetNumResEvals at Base 2.5.0
+ IDASpilsGetReturnFlagName at Base 2.5.0
+ IDASpilsGetWorkSpace at Base 2.5.0
+ IDASpilsPSolve at Base 2.5.0
+ IDASpilsSetEpsLin at Base 2.5.0
+ IDASpilsSetGSType at Base 2.5.0
+ IDASpilsSetIncrementFactor at Base 2.5.0
+ IDASpilsSetJacTimesVecFn at Base 2.5.0
+ IDASpilsSetMaxRestarts at Base 2.5.0
+ IDASpilsSetMaxl at Base 2.5.0
+ IDASpilsSetPreconditioner at Base 2.5.0
+ IDASptfqmr at Base 2.5.0
+ IDAWFtolerances at Base 2.5.0
+ IDAWrmsNorm at Base 2.5.0
+ ModifiedGS at Base 2.5.0
+ N_VAbs at Base 2.5.0
+ N_VAddConst at Base 2.5.0
+ N_VClone at Base 2.5.0
+ N_VCloneEmpty at Base 2.5.0
+ N_VCloneEmptyVectorArray at Base 2.5.0
+ N_VCloneVectorArray at Base 2.5.0
+ N_VCompare at Base 2.5.0
+ N_VConst at Base 2.5.0
+ N_VConstrMask at Base 2.5.0
+ N_VDestroy at Base 2.5.0
+ N_VDestroyVectorArray at Base 2.5.0
+ N_VDiv at Base 2.5.0
+ N_VDotProd at Base 2.5.0
+ N_VGetArrayPointer at Base 2.5.0
+ N_VInv at Base 2.5.0
+ N_VInvTest at Base 2.5.0
+ N_VL1Norm at Base 2.5.0
+ N_VLinearSum at Base 2.5.0
+ N_VMaxNorm at Base 2.5.0
+ N_VMin at Base 2.5.0
+ N_VMinQuotient at Base 2.5.0
+ N_VProd at Base 2.5.0
+ N_VScale at Base 2.5.0
+ N_VSetArrayPointer at Base 2.5.0
+ N_VSpace at Base 2.5.0
+ N_VWL2Norm at Base 2.5.0
+ N_VWrmsNorm at Base 2.5.0
+ N_VWrmsNormMask at Base 2.5.0
+ NewBandMat at Base 2.5.0
+ NewDenseMat at Base 2.5.0
+ NewIntArray at Base 2.5.0
+ NewLintArray at Base 2.5.0
+ NewRealArray at Base 2.5.0
+ PrintMat at Base 2.5.0
+ QRfact at Base 2.5.0
+ QRsol at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+ SetToZero at Base 2.5.0
+ SpbcgFree at Base 2.5.0
+ SpbcgMalloc at Base 2.5.0
+ SpbcgSolve at Base 2.5.0
+ SpgmrFree at Base 2.5.0
+ SpgmrMalloc at Base 2.5.0
+ SpgmrSolve at Base 2.5.0
+ SptfqmrFree at Base 2.5.0
+ SptfqmrMalloc at Base 2.5.0
+ SptfqmrSolve at Base 2.5.0
+ bandAddIdentity at Base 2.5.0
+ bandCopy at Base 2.5.0
+ bandGBTRF at Base 2.5.0
+ bandGBTRS at Base 2.5.0
+ bandScale at Base 2.5.0
+ denseAddIdentity at Base 2.5.0
+ denseCopy at Base 2.5.0
+ denseGEQRF at Base 2.5.0
+ denseGETRF at Base 2.5.0
+ denseGETRS at Base 2.5.0
+ denseORMQR at Base 2.5.0
+ densePOTRF at Base 2.5.0
+ densePOTRS at Base 2.5.0
+ denseScale at Base 2.5.0
+ destroyArray at Base 2.5.0
+ destroyMat at Base 2.5.0
+ idaDlsBandDQJac at Base 2.5.0
+ idaDlsDenseDQJac at Base 2.5.0
+ newBandMat at Base 2.5.0
+ newDenseMat at Base 2.5.0
+ newIntArray at Base 2.5.0
+ newLintArray at Base 2.5.0
+ newRealArray at Base 2.5.0
diff --git a/debian/libsundials-idas0.install b/debian/libsundials-idas0.install
new file mode 100644
index 0000000..9cd7c0b
--- /dev/null
+++ b/debian/libsundials-idas0.install
@@ -0,0 +1 @@
+usr/lib/libsundials_idas.so.*
diff --git a/debian/libsundials-idas0.symbols b/debian/libsundials-idas0.symbols
new file mode 100644
index 0000000..75bf8b2
--- /dev/null
+++ b/debian/libsundials-idas0.symbols
@@ -0,0 +1,302 @@
+libsundials_idas.so.0 libsundials-idas0 #MINVER#
+ AddIdentity at Base 2.5.0
+ BandCopy at Base 2.5.0
+ BandGBTRF at Base 2.5.0
+ BandGBTRS at Base 2.5.0
+ BandScale at Base 2.5.0
+ ClassicalGS at Base 2.5.0
+ DenseCopy at Base 2.5.0
+ DenseGEQRF at Base 2.5.0
+ DenseGETRF at Base 2.5.0
+ DenseGETRS at Base 2.5.0
+ DenseORMQR at Base 2.5.0
+ DensePOTRF at Base 2.5.0
+ DensePOTRS at Base 2.5.0
+ DenseScale at Base 2.5.0
+ DestroyArray at Base 2.5.0
+ DestroyMat at Base 2.5.0
+ IDAAdjFree at Base 2.5.0
+ IDAAdjInit at Base 2.5.0
+ IDAAdjReInit at Base 2.5.0
+ IDAAdjSetNoSensi at Base 2.5.0
+ IDABBDPrecGetNumGfnEvals at Base 2.5.0
+ IDABBDPrecGetWorkSpace at Base 2.5.0
+ IDABBDPrecInit at Base 2.5.0
+ IDABBDPrecInitB at Base 2.5.0
+ IDABBDPrecReInit at Base 2.5.0
+ IDABBDPrecReInitB at Base 2.5.0
+ IDABand at Base 2.5.0
+ IDABandB at Base 2.5.0
+ IDACalcIC at Base 2.5.0
+ IDACalcICB at Base 2.5.0
+ IDACalcICBS at Base 2.5.0
+ IDACreate at Base 2.5.0
+ IDACreateB at Base 2.5.0
+ IDADense at Base 2.5.0
+ IDADenseB at Base 2.5.0
+ IDADlsGetLastFlag at Base 2.5.0
+ IDADlsGetNumJacEvals at Base 2.5.0
+ IDADlsGetNumResEvals at Base 2.5.0
+ IDADlsGetReturnFlagName at Base 2.5.0
+ IDADlsGetWorkSpace at Base 2.5.0
+ IDADlsSetBandJacFn at Base 2.5.0
+ IDADlsSetBandJacFnB at Base 2.5.0
+ IDADlsSetDenseJacFn at Base 2.5.0
+ IDADlsSetDenseJacFnB at Base 2.5.0
+ IDAErrHandler at Base 2.5.0
+ IDAEwtSet at Base 2.5.0
+ IDAFree at Base 2.5.0
+ IDAGetActualInitStep at Base 2.5.0
+ IDAGetAdjCheckPointsInfo at Base 2.5.0
+ IDAGetAdjCurrentCheckPoint at Base 2.5.0
+ IDAGetAdjDataPointHermite at Base 2.5.0
+ IDAGetAdjDataPointPolynomial at Base 2.5.0
+ IDAGetAdjIDABmem at Base 2.5.0
+ IDAGetAdjY at Base 2.5.0
+ IDAGetB at Base 2.5.0
+ IDAGetConsistentIC at Base 2.5.0
+ IDAGetConsistentICB at Base 2.5.0
+ IDAGetCurrentOrder at Base 2.5.0
+ IDAGetCurrentStep at Base 2.5.0
+ IDAGetCurrentTime at Base 2.5.0
+ IDAGetDky at Base 2.5.0
+ IDAGetErrWeights at Base 2.5.0
+ IDAGetEstLocalErrors at Base 2.5.0
+ IDAGetIntegratorStats at Base 2.5.0
+ IDAGetLastOrder at Base 2.5.0
+ IDAGetLastStep at Base 2.5.0
+ IDAGetNonlinSolvStats at Base 2.5.0
+ IDAGetNumBacktrackOps at Base 2.5.0
+ IDAGetNumErrTestFails at Base 2.5.0
+ IDAGetNumGEvals at Base 2.5.0
+ IDAGetNumLinSolvSetups at Base 2.5.0
+ IDAGetNumNonlinSolvConvFails at Base 2.5.0
+ IDAGetNumNonlinSolvIters at Base 2.5.0
+ IDAGetNumResEvals at Base 2.5.0
+ IDAGetNumResEvalsSens at Base 2.5.0
+ IDAGetNumSteps at Base 2.5.0
+ IDAGetQuad at Base 2.5.0
+ IDAGetQuadB at Base 2.5.0
+ IDAGetQuadDky at Base 2.5.0
+ IDAGetQuadErrWeights at Base 2.5.0
+ IDAGetQuadNumErrTestFails at Base 2.5.0
+ IDAGetQuadNumRhsEvals at Base 2.5.0
+ IDAGetQuadSens1 at Base 2.5.0
+ IDAGetQuadSens at Base 2.5.0
+ IDAGetQuadSensDky1 at Base 2.5.0
+ IDAGetQuadSensDky at Base 2.5.0
+ IDAGetQuadSensErrWeights at Base 2.5.0
+ IDAGetQuadSensNumErrTestFails at Base 2.5.0
+ IDAGetQuadSensNumRhsEvals at Base 2.5.0
+ IDAGetQuadSensStats at Base 2.5.0
+ IDAGetQuadStats at Base 2.5.0
+ IDAGetReturnFlagName at Base 2.5.0
+ IDAGetRootInfo at Base 2.5.0
+ IDAGetSens1 at Base 2.5.0
+ IDAGetSens at Base 2.5.0
+ IDAGetSensConsistentIC at Base 2.5.0
+ IDAGetSensDky1 at Base 2.5.0
+ IDAGetSensDky at Base 2.5.0
+ IDAGetSensErrWeights at Base 2.5.0
+ IDAGetSensNonlinSolvStats at Base 2.5.0
+ IDAGetSensNumErrTestFails at Base 2.5.0
+ IDAGetSensNumLinSolvSetups at Base 2.5.0
+ IDAGetSensNumNonlinSolvConvFails at Base 2.5.0
+ IDAGetSensNumNonlinSolvIters at Base 2.5.0
+ IDAGetSensNumResEvals at Base 2.5.0
+ IDAGetSensStats at Base 2.5.0
+ IDAGetSolution at Base 2.5.0
+ IDAGetTolScaleFactor at Base 2.5.0
+ IDAGetWorkSpace at Base 2.5.0
+ IDAInit at Base 2.5.0
+ IDAInitB at Base 2.5.0
+ IDAInitBS at Base 2.5.0
+ IDAInitialSetup at Base 2.5.0
+ IDALapackBand at Base 2.5.0
+ IDALapackDense at Base 2.5.0
+ IDAProcessError at Base 2.5.0
+ IDAQuadFree at Base 2.5.0
+ IDAQuadInit at Base 2.5.0
+ IDAQuadInitB at Base 2.5.0
+ IDAQuadInitBS at Base 2.5.0
+ IDAQuadReInit at Base 2.5.0
+ IDAQuadReInitB at Base 2.5.0
+ IDAQuadSStolerances at Base 2.5.0
+ IDAQuadSStolerancesB at Base 2.5.0
+ IDAQuadSVtolerances at Base 2.5.0
+ IDAQuadSVtolerancesB at Base 2.5.0
+ IDAQuadSensEEtolerances at Base 2.5.0
+ IDAQuadSensEwtSet at Base 2.5.0
+ IDAQuadSensFree at Base 2.5.0
+ IDAQuadSensInit at Base 2.5.0
+ IDAQuadSensReInit at Base 2.5.0
+ IDAQuadSensSStolerances at Base 2.5.0
+ IDAQuadSensSVtolerances at Base 2.5.0
+ IDAReInit at Base 2.5.0
+ IDAReInitB at Base 2.5.0
+ IDARootInit at Base 2.5.0
+ IDASStolerances at Base 2.5.0
+ IDASStolerancesB at Base 2.5.0
+ IDASVtolerances at Base 2.5.0
+ IDASVtolerancesB at Base 2.5.0
+ IDASensEEtolerances at Base 2.5.0
+ IDASensEwtSet at Base 2.5.0
+ IDASensFree at Base 2.5.0
+ IDASensInit at Base 2.5.0
+ IDASensReInit at Base 2.5.0
+ IDASensResDQ at Base 2.5.0
+ IDASensSStolerances at Base 2.5.0
+ IDASensSVtolerances at Base 2.5.0
+ IDASensToggleOff at Base 2.5.0
+ IDASensWrmsNorm at Base 2.5.0
+ IDASensWrmsNormUpdate at Base 2.5.0
+ IDASetConstraints at Base 2.5.0
+ IDASetConstraintsB at Base 2.5.0
+ IDASetErrFile at Base 2.5.0
+ IDASetErrHandlerFn at Base 2.5.0
+ IDASetId at Base 2.5.0
+ IDASetIdB at Base 2.5.0
+ IDASetInitStep at Base 2.5.0
+ IDASetInitStepB at Base 2.5.0
+ IDASetLineSearchOffIC at Base 2.5.0
+ IDASetMaxConvFails at Base 2.5.0
+ IDASetMaxErrTestFails at Base 2.5.0
+ IDASetMaxNonlinIters at Base 2.5.0
+ IDASetMaxNumItersIC at Base 2.5.0
+ IDASetMaxNumJacsIC at Base 2.5.0
+ IDASetMaxNumSteps at Base 2.5.0
+ IDASetMaxNumStepsB at Base 2.5.0
+ IDASetMaxNumStepsIC at Base 2.5.0
+ IDASetMaxOrd at Base 2.5.0
+ IDASetMaxOrdB at Base 2.5.0
+ IDASetMaxStep at Base 2.5.0
+ IDASetMaxStepB at Base 2.5.0
+ IDASetNoInactiveRootWarn at Base 2.5.0
+ IDASetNonlinConvCoef at Base 2.5.0
+ IDASetNonlinConvCoefIC at Base 2.5.0
+ IDASetQuadErrCon at Base 2.5.0
+ IDASetQuadErrConB at Base 2.5.0
+ IDASetQuadSensErrCon at Base 2.5.0
+ IDASetRootDirection at Base 2.5.0
+ IDASetSensDQMethod at Base 2.5.0
+ IDASetSensErrCon at Base 2.5.0
+ IDASetSensMaxNonlinIters at Base 2.5.0
+ IDASetSensParams at Base 2.5.0
+ IDASetStepToleranceIC at Base 2.5.0
+ IDASetStopTime at Base 2.5.0
+ IDASetSuppressAlg at Base 2.5.0
+ IDASetSuppressAlgB at Base 2.5.0
+ IDASetUserData at Base 2.5.0
+ IDASetUserDataB at Base 2.5.0
+ IDASolve at Base 2.5.0
+ IDASolveB at Base 2.5.0
+ IDASolveF at Base 2.5.0
+ IDASpbcg at Base 2.5.0
+ IDASpbcgB at Base 2.5.0
+ IDASpgmr at Base 2.5.0
+ IDASpgmrB at Base 2.5.0
+ IDASpilsAtimes at Base 2.5.0
+ IDASpilsDQJtimes at Base 2.5.0
+ IDASpilsGetLastFlag at Base 2.5.0
+ IDASpilsGetNumConvFails at Base 2.5.0
+ IDASpilsGetNumJtimesEvals at Base 2.5.0
+ IDASpilsGetNumLinIters at Base 2.5.0
+ IDASpilsGetNumPrecEvals at Base 2.5.0
+ IDASpilsGetNumPrecSolves at Base 2.5.0
+ IDASpilsGetNumResEvals at Base 2.5.0
+ IDASpilsGetReturnFlagName at Base 2.5.0
+ IDASpilsGetWorkSpace at Base 2.5.0
+ IDASpilsPSolve at Base 2.5.0
+ IDASpilsSetEpsLin at Base 2.5.0
+ IDASpilsSetEpsLinB at Base 2.5.0
+ IDASpilsSetGSType at Base 2.5.0
+ IDASpilsSetGSTypeB at Base 2.5.0
+ IDASpilsSetIncrementFactor at Base 2.5.0
+ IDASpilsSetIncrementFactorB at Base 2.5.0
+ IDASpilsSetJacTimesVecFn at Base 2.5.0
+ IDASpilsSetJacTimesVecFnB at Base 2.5.0
+ IDASpilsSetMaxRestarts at Base 2.5.0
+ IDASpilsSetMaxRestartsB at Base 2.5.0
+ IDASpilsSetMaxl at Base 2.5.0
+ IDASpilsSetMaxlB at Base 2.5.0
+ IDASpilsSetPreconditioner at Base 2.5.0
+ IDASpilsSetPreconditionerB at Base 2.5.0
+ IDASptfqmr at Base 2.5.0
+ IDASptfqmrB at Base 2.5.0
+ IDAWFtolerances at Base 2.5.0
+ IDAWrmsNorm at Base 2.5.0
+ ModifiedGS at Base 2.5.0
+ N_VAbs at Base 2.5.0
+ N_VAddConst at Base 2.5.0
+ N_VClone at Base 2.5.0
+ N_VCloneEmpty at Base 2.5.0
+ N_VCloneEmptyVectorArray at Base 2.5.0
+ N_VCloneVectorArray at Base 2.5.0
+ N_VCompare at Base 2.5.0
+ N_VConst at Base 2.5.0
+ N_VConstrMask at Base 2.5.0
+ N_VDestroy at Base 2.5.0
+ N_VDestroyVectorArray at Base 2.5.0
+ N_VDiv at Base 2.5.0
+ N_VDotProd at Base 2.5.0
+ N_VGetArrayPointer at Base 2.5.0
+ N_VInv at Base 2.5.0
+ N_VInvTest at Base 2.5.0
+ N_VL1Norm at Base 2.5.0
+ N_VLinearSum at Base 2.5.0
+ N_VMaxNorm at Base 2.5.0
+ N_VMin at Base 2.5.0
+ N_VMinQuotient at Base 2.5.0
+ N_VProd at Base 2.5.0
+ N_VScale at Base 2.5.0
+ N_VSetArrayPointer at Base 2.5.0
+ N_VSpace at Base 2.5.0
+ N_VWL2Norm at Base 2.5.0
+ N_VWrmsNorm at Base 2.5.0
+ N_VWrmsNormMask at Base 2.5.0
+ NewBandMat at Base 2.5.0
+ NewDenseMat at Base 2.5.0
+ NewIntArray at Base 2.5.0
+ NewLintArray at Base 2.5.0
+ NewRealArray at Base 2.5.0
+ PrintMat at Base 2.5.0
+ QRfact at Base 2.5.0
+ QRsol at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+ SetToZero at Base 2.5.0
+ SpbcgFree at Base 2.5.0
+ SpbcgMalloc at Base 2.5.0
+ SpbcgSolve at Base 2.5.0
+ SpgmrFree at Base 2.5.0
+ SpgmrMalloc at Base 2.5.0
+ SpgmrSolve at Base 2.5.0
+ SptfqmrFree at Base 2.5.0
+ SptfqmrMalloc at Base 2.5.0
+ SptfqmrSolve at Base 2.5.0
+ bandAddIdentity at Base 2.5.0
+ bandCopy at Base 2.5.0
+ bandGBTRF at Base 2.5.0
+ bandGBTRS at Base 2.5.0
+ bandScale at Base 2.5.0
+ denseAddIdentity at Base 2.5.0
+ denseCopy at Base 2.5.0
+ denseGEQRF at Base 2.5.0
+ denseGETRF at Base 2.5.0
+ denseGETRS at Base 2.5.0
+ denseORMQR at Base 2.5.0
+ densePOTRF at Base 2.5.0
+ densePOTRS at Base 2.5.0
+ denseScale at Base 2.5.0
+ destroyArray at Base 2.5.0
+ destroyMat at Base 2.5.0
+ idaDlsBandDQJac at Base 2.5.0
+ idaDlsDenseDQJac at Base 2.5.0
+ newBandMat at Base 2.5.0
+ newDenseMat at Base 2.5.0
+ newIntArray at Base 2.5.0
+ newLintArray at Base 2.5.0
+ newRealArray at Base 2.5.0
diff --git a/debian/libsundials-kinsol1.install b/debian/libsundials-kinsol1.install
new file mode 100644
index 0000000..4c515ed
--- /dev/null
+++ b/debian/libsundials-kinsol1.install
@@ -0,0 +1 @@
+usr/lib/libsundials_kinsol.so.*
diff --git a/debian/libsundials-kinsol1.symbols b/debian/libsundials-kinsol1.symbols
new file mode 100644
index 0000000..404e00f
--- /dev/null
+++ b/debian/libsundials-kinsol1.symbols
@@ -0,0 +1,164 @@
+libsundials_kinsol.so.1 libsundials-kinsol1 #MINVER#
+ AddIdentity at Base 2.5.0
+ BandCopy at Base 2.5.0
+ BandGBTRF at Base 2.5.0
+ BandGBTRS at Base 2.5.0
+ BandScale at Base 2.5.0
+ ClassicalGS at Base 2.5.0
+ DenseCopy at Base 2.5.0
+ DenseGEQRF at Base 2.5.0
+ DenseGETRF at Base 2.5.0
+ DenseGETRS at Base 2.5.0
+ DenseORMQR at Base 2.5.0
+ DensePOTRF at Base 2.5.0
+ DensePOTRS at Base 2.5.0
+ DenseScale at Base 2.5.0
+ DestroyArray at Base 2.5.0
+ DestroyMat at Base 2.5.0
+ KINBBDPrecGetNumGfnEvals at Base 2.5.0
+ KINBBDPrecGetWorkSpace at Base 2.5.0
+ KINBBDPrecInit at Base 2.5.0
+ KINBand at Base 2.5.0
+ KINCreate at Base 2.5.0
+ KINDense at Base 2.5.0
+ KINDlsGetLastFlag at Base 2.5.0
+ KINDlsGetNumFuncEvals at Base 2.5.0
+ KINDlsGetNumJacEvals at Base 2.5.0
+ KINDlsGetReturnFlagName at Base 2.5.0
+ KINDlsGetWorkSpace at Base 2.5.0
+ KINDlsSetBandJacFn at Base 2.5.0
+ KINDlsSetDenseJacFn at Base 2.5.0
+ KINErrHandler at Base 2.5.0
+ KINFree at Base 2.5.0
+ KINGetFuncNorm at Base 2.5.0
+ KINGetNumBacktrackOps at Base 2.5.0
+ KINGetNumBetaCondFails at Base 2.5.0
+ KINGetNumFuncEvals at Base 2.5.0
+ KINGetNumNonlinSolvIters at Base 2.5.0
+ KINGetReturnFlagName at Base 2.5.0
+ KINGetStepLength at Base 2.5.0
+ KINGetWorkSpace at Base 2.5.0
+ KINInfoHandler at Base 2.5.0
+ KINInit at Base 2.5.0
+ KINLapackBand at Base 2.5.0
+ KINLapackDense at Base 2.5.0
+ KINPrintInfo at Base 2.5.0
+ KINProcessError at Base 2.5.0
+ KINSetConstraints at Base 2.5.0
+ KINSetErrFile at Base 2.5.0
+ KINSetErrHandlerFn at Base 2.5.0
+ KINSetEtaConstValue at Base 2.5.0
+ KINSetEtaForm at Base 2.5.0
+ KINSetEtaParams at Base 2.5.0
+ KINSetFuncNormTol at Base 2.5.0
+ KINSetInfoFile at Base 2.5.0
+ KINSetInfoHandlerFn at Base 2.5.0
+ KINSetMaxBetaFails at Base 2.5.0
+ KINSetMaxNewtonStep at Base 2.5.0
+ KINSetMaxSetupCalls at Base 2.5.0
+ KINSetMaxSubSetupCalls at Base 2.5.0
+ KINSetNoInitSetup at Base 2.5.0
+ KINSetNoMinEps at Base 2.5.0
+ KINSetNoResMon at Base 2.5.0
+ KINSetNumMaxIters at Base 2.5.0
+ KINSetPrintLevel at Base 2.5.0
+ KINSetRelErrFunc at Base 2.5.0
+ KINSetResMonConstValue at Base 2.5.0
+ KINSetResMonParams at Base 2.5.0
+ KINSetScaledStepTol at Base 2.5.0
+ KINSetSysFunc at Base 2.5.0
+ KINSetUserData at Base 2.5.0
+ KINSol at Base 2.5.0
+ KINSpbcg at Base 2.5.0
+ KINSpgmr at Base 2.5.0
+ KINSpilsAtimes at Base 2.5.0
+ KINSpilsDQJtimes at Base 2.5.0
+ KINSpilsGetLastFlag at Base 2.5.0
+ KINSpilsGetNumConvFails at Base 2.5.0
+ KINSpilsGetNumFuncEvals at Base 2.5.0
+ KINSpilsGetNumJtimesEvals at Base 2.5.0
+ KINSpilsGetNumLinIters at Base 2.5.0
+ KINSpilsGetNumPrecEvals at Base 2.5.0
+ KINSpilsGetNumPrecSolves at Base 2.5.0
+ KINSpilsGetReturnFlagName at Base 2.5.0
+ KINSpilsGetWorkSpace at Base 2.5.0
+ KINSpilsPSolve at Base 2.5.0
+ KINSpilsSetJacTimesVecFn at Base 2.5.0
+ KINSpilsSetMaxRestarts at Base 2.5.0
+ KINSpilsSetPreconditioner at Base 2.5.0
+ KINSptfqmr at Base 2.5.0
+ ModifiedGS at Base 2.5.0
+ N_VAbs at Base 2.5.0
+ N_VAddConst at Base 2.5.0
+ N_VClone at Base 2.5.0
+ N_VCloneEmpty at Base 2.5.0
+ N_VCloneEmptyVectorArray at Base 2.5.0
+ N_VCloneVectorArray at Base 2.5.0
+ N_VCompare at Base 2.5.0
+ N_VConst at Base 2.5.0
+ N_VConstrMask at Base 2.5.0
+ N_VDestroy at Base 2.5.0
+ N_VDestroyVectorArray at Base 2.5.0
+ N_VDiv at Base 2.5.0
+ N_VDotProd at Base 2.5.0
+ N_VGetArrayPointer at Base 2.5.0
+ N_VInv at Base 2.5.0
+ N_VInvTest at Base 2.5.0
+ N_VL1Norm at Base 2.5.0
+ N_VLinearSum at Base 2.5.0
+ N_VMaxNorm at Base 2.5.0
+ N_VMin at Base 2.5.0
+ N_VMinQuotient at Base 2.5.0
+ N_VProd at Base 2.5.0
+ N_VScale at Base 2.5.0
+ N_VSetArrayPointer at Base 2.5.0
+ N_VSpace at Base 2.5.0
+ N_VWL2Norm at Base 2.5.0
+ N_VWrmsNorm at Base 2.5.0
+ N_VWrmsNormMask at Base 2.5.0
+ NewBandMat at Base 2.5.0
+ NewDenseMat at Base 2.5.0
+ NewIntArray at Base 2.5.0
+ NewLintArray at Base 2.5.0
+ NewRealArray at Base 2.5.0
+ PrintMat at Base 2.5.0
+ QRfact at Base 2.5.0
+ QRsol at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+ SetToZero at Base 2.5.0
+ SpbcgFree at Base 2.5.0
+ SpbcgMalloc at Base 2.5.0
+ SpbcgSolve at Base 2.5.0
+ SpgmrFree at Base 2.5.0
+ SpgmrMalloc at Base 2.5.0
+ SpgmrSolve at Base 2.5.0
+ SptfqmrFree at Base 2.5.0
+ SptfqmrMalloc at Base 2.5.0
+ SptfqmrSolve at Base 2.5.0
+ bandAddIdentity at Base 2.5.0
+ bandCopy at Base 2.5.0
+ bandGBTRF at Base 2.5.0
+ bandGBTRS at Base 2.5.0
+ bandScale at Base 2.5.0
+ denseAddIdentity at Base 2.5.0
+ denseCopy at Base 2.5.0
+ denseGEQRF at Base 2.5.0
+ denseGETRF at Base 2.5.0
+ denseGETRS at Base 2.5.0
+ denseORMQR at Base 2.5.0
+ densePOTRF at Base 2.5.0
+ densePOTRS at Base 2.5.0
+ denseScale at Base 2.5.0
+ destroyArray at Base 2.5.0
+ destroyMat at Base 2.5.0
+ kinDlsBandDQJac at Base 2.5.0
+ kinDlsDenseDQJac at Base 2.5.0
+ newBandMat at Base 2.5.0
+ newDenseMat at Base 2.5.0
+ newIntArray at Base 2.5.0
+ newLintArray at Base 2.5.0
+ newRealArray at Base 2.5.0
diff --git a/debian/libsundials-nvecparallel-dev.install b/debian/libsundials-nvecparallel-dev.install
new file mode 100644
index 0000000..2dcc27a
--- /dev/null
+++ b/debian/libsundials-nvecparallel-dev.install
@@ -0,0 +1,6 @@
+usr/lib/libsundials_nvecparallel.a
+usr/lib/libsundials_fnvecparallel.a
+usr/lib/libsundials_nvecparallel.so
+usr/lib/libsundials_fnvecparallel.so
+
+usr/include/nvector/nvector_parallel.h
diff --git a/debian/libsundials-nvecparallel0.install b/debian/libsundials-nvecparallel0.install
new file mode 100644
index 0000000..93e2da7
--- /dev/null
+++ b/debian/libsundials-nvecparallel0.install
@@ -0,0 +1,2 @@
+usr/lib/libsundials_nvecparallel.so.*
+usr/lib/libsundials_fnvecparallel.so.*
diff --git a/debian/libsundials-nvecparallel0.symbols b/debian/libsundials-nvecparallel0.symbols
new file mode 100644
index 0000000..698af24
--- /dev/null
+++ b/debian/libsundials-nvecparallel0.symbols
@@ -0,0 +1,55 @@
+libsundials_nvecparallel.so.0 libsundials-nvecparallel0 #MINVER#
+ N_VAbs_Parallel at Base 2.5.0
+ N_VAddConst_Parallel at Base 2.5.0
+ N_VCloneEmpty_Parallel at Base 2.5.0
+ N_VCloneVectorArrayEmpty_Parallel at Base 2.5.0
+ N_VCloneVectorArray_Parallel at Base 2.5.0
+ N_VClone_Parallel at Base 2.5.0
+ N_VCompare_Parallel at Base 2.5.0
+ N_VConst_Parallel at Base 2.5.0
+ N_VConstrMask_Parallel at Base 2.5.0
+ N_VDestroyVectorArray_Parallel at Base 2.5.0
+ N_VDestroy_Parallel at Base 2.5.0
+ N_VDiv_Parallel at Base 2.5.0
+ N_VDotProd_Parallel at Base 2.5.0
+ N_VGetArrayPointer_Parallel at Base 2.5.0
+ N_VInvTest_Parallel at Base 2.5.0
+ N_VInv_Parallel at Base 2.5.0
+ N_VL1Norm_Parallel at Base 2.5.0
+ N_VLinearSum_Parallel at Base 2.5.0
+ N_VMake_Parallel at Base 2.5.0
+ N_VMaxNorm_Parallel at Base 2.5.0
+ N_VMinQuotient_Parallel at Base 2.5.0
+ N_VMin_Parallel at Base 2.5.0
+ N_VNewEmpty_Parallel at Base 2.5.0
+ N_VNew_Parallel at Base 2.5.0
+ N_VPrint_Parallel at Base 2.5.0
+ N_VProd_Parallel at Base 2.5.0
+ N_VScale_Parallel at Base 2.5.0
+ N_VSetArrayPointer_Parallel at Base 2.5.0
+ N_VSpace_Parallel at Base 2.5.0
+ N_VWL2Norm_Parallel at Base 2.5.0
+ N_VWrmsNormMask_Parallel at Base 2.5.0
+ N_VWrmsNorm_Parallel at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+libsundials_fnvecparallel.so.0 libsundials-nvecparallel0 #MINVER#
+ F2C_CVODE_vec at Base 2.5.0
+ F2C_CVODE_vecB at Base 2.5.0
+ F2C_CVODE_vecQ at Base 2.5.0
+ F2C_CVODE_vecQB at Base 2.5.0
+ F2C_CVODE_vecS at Base 2.5.0
+ F2C_IDA_vec at Base 2.5.0
+ F2C_IDA_vecB at Base 2.5.0
+ F2C_IDA_vecQ at Base 2.5.0
+ F2C_IDA_vecQB at Base 2.5.0
+ F2C_IDA_vecS at Base 2.5.0
+ F2C_KINSOL_vec at Base 2.5.0
+ fnvinitp_ at Base 2.5.0
+ fnvinitp_b_ at Base 2.5.0
+ fnvinitp_q_ at Base 2.5.0
+ fnvinitp_qb_ at Base 2.5.0
+ fnvinitp_s_ at Base 2.5.0
diff --git a/debian/libsundials-nvecserial0.install b/debian/libsundials-nvecserial0.install
new file mode 100644
index 0000000..f6ef1af
--- /dev/null
+++ b/debian/libsundials-nvecserial0.install
@@ -0,0 +1,2 @@
+usr/lib/libsundials_nvecserial.so.*
+usr/lib/libsundials_fnvecserial.so.*
diff --git a/debian/libsundials-nvecserial0.symbols b/debian/libsundials-nvecserial0.symbols
new file mode 100644
index 0000000..bee6165
--- /dev/null
+++ b/debian/libsundials-nvecserial0.symbols
@@ -0,0 +1,55 @@
+libsundials_nvecserial.so.0 libsundials-nvecserial0 #MINVER#
+ N_VAbs_Serial at Base 2.5.0
+ N_VAddConst_Serial at Base 2.5.0
+ N_VCloneEmpty_Serial at Base 2.5.0
+ N_VCloneVectorArrayEmpty_Serial at Base 2.5.0
+ N_VCloneVectorArray_Serial at Base 2.5.0
+ N_VClone_Serial at Base 2.5.0
+ N_VCompare_Serial at Base 2.5.0
+ N_VConst_Serial at Base 2.5.0
+ N_VConstrMask_Serial at Base 2.5.0
+ N_VDestroyVectorArray_Serial at Base 2.5.0
+ N_VDestroy_Serial at Base 2.5.0
+ N_VDiv_Serial at Base 2.5.0
+ N_VDotProd_Serial at Base 2.5.0
+ N_VGetArrayPointer_Serial at Base 2.5.0
+ N_VInvTest_Serial at Base 2.5.0
+ N_VInv_Serial at Base 2.5.0
+ N_VL1Norm_Serial at Base 2.5.0
+ N_VLinearSum_Serial at Base 2.5.0
+ N_VMake_Serial at Base 2.5.0
+ N_VMaxNorm_Serial at Base 2.5.0
+ N_VMinQuotient_Serial at Base 2.5.0
+ N_VMin_Serial at Base 2.5.0
+ N_VNewEmpty_Serial at Base 2.5.0
+ N_VNew_Serial at Base 2.5.0
+ N_VPrint_Serial at Base 2.5.0
+ N_VProd_Serial at Base 2.5.0
+ N_VScale_Serial at Base 2.5.0
+ N_VSetArrayPointer_Serial at Base 2.5.0
+ N_VSpace_Serial at Base 2.5.0
+ N_VWL2Norm_Serial at Base 2.5.0
+ N_VWrmsNormMask_Serial at Base 2.5.0
+ N_VWrmsNorm_Serial at Base 2.5.0
+ RAbs at Base 2.5.0
+ RExp at Base 2.5.0
+ RPowerI at Base 2.5.0
+ RPowerR at Base 2.5.0
+ RSqrt at Base 2.5.0
+libsundials_fnvecserial.so.0 libsundials-nvecserial0 #MINVER#
+ F2C_CVODE_vec at Base 2.5.0
+ F2C_CVODE_vecB at Base 2.5.0
+ F2C_CVODE_vecQ at Base 2.5.0
+ F2C_CVODE_vecQB at Base 2.5.0
+ F2C_CVODE_vecS at Base 2.5.0
+ F2C_IDA_vec at Base 2.5.0
+ F2C_IDA_vecB at Base 2.5.0
+ F2C_IDA_vecQ at Base 2.5.0
+ F2C_IDA_vecQB at Base 2.5.0
+ F2C_IDA_vecS at Base 2.5.0
+ F2C_KINSOL_vec at Base 2.5.0
+ fnvinits_ at Base 2.5.0
+ fnvinits_b_ at Base 2.5.0
+ fnvinits_q_ at Base 2.5.0
+ fnvinits_qb_ at Base 2.5.0
+ fnvinits_s_ at Base 2.5.0
diff --git a/debian/libsundials-parallel.lintian-overrides b/debian/libsundials-parallel.lintian-overrides
new file mode 100644
index 0000000..b4e8118
--- /dev/null
+++ b/debian/libsundials-parallel.lintian-overrides
@@ -0,0 +1,2 @@
+# This package will install all serial libraries
+libsundials-parallel: empty-binary-package
diff --git a/debian/libsundials-serial-dev.install b/debian/libsundials-serial-dev.install
new file mode 100644
index 0000000..9aa026c
--- /dev/null
+++ b/debian/libsundials-serial-dev.install
@@ -0,0 +1,21 @@
+usr/lib/libsundials_cvode*.a
+usr/lib/libsundials_cvode*.so
+usr/lib/libsundials_ida*.a
+usr/lib/libsundials_ida*.so
+usr/lib/libsundials_kinsol.a
+usr/lib/libsundials_*serial.a
+usr/lib/libsundials_*serial.so
+
+usr/lib/libsundials_kinsol.so
+
+usr/include/cvode
+usr/include/cvodes
+usr/include/ida
+usr/include/idas
+usr/include/kinsol
+usr/include/nvector/nvector_serial.h
+usr/include/sundials
+
+bin/sundials-config usr/bin
+
+debian/sundials-config.1 usr/share/man/man1
diff --git a/debian/libsundials-serial-doc.docs b/debian/libsundials-serial-doc.docs
new file mode 100644
index 0000000..bb06dd9
--- /dev/null
+++ b/debian/libsundials-serial-doc.docs
@@ -0,0 +1,11 @@
+./doc/ida/ida_guide.pdf
+./doc/ida/ida_examples.pdf
+./doc/cvodes/cvs_guide.pdf
+./doc/cvodes/cvs_examples.pdf
+./doc/sundialsTB/sundialsTB.pdf
+./doc/idas/idas_examples.pdf
+./doc/idas/idas_guide.pdf
+./doc/kinsol/kin_examples.pdf
+./doc/kinsol/kin_guide.pdf
+./doc/cvode/cv_guide.pdf
+./doc/cvode/cv_examples.pdf
diff --git a/debian/libsundials-serial.lintian-overrides b/debian/libsundials-serial.lintian-overrides
new file mode 100644
index 0000000..e8157b7
--- /dev/null
+++ b/debian/libsundials-serial.lintian-overrides
@@ -0,0 +1,2 @@
+# This package will install all serial libraries
+libsundials-serial: empty-binary-package
diff --git a/debian/octave-sundials.install b/debian/octave-sundials.install
new file mode 100644
index 0000000..1c79c6a
--- /dev/null
+++ b/debian/octave-sundials.install
@@ -0,0 +1,2 @@
+usr/share/octave/
+usr/lib/*/octave/
diff --git a/debian/orig-tar.exclude b/debian/orig-tar.exclude
new file mode 100644
index 0000000..bd98a73
--- /dev/null
+++ b/debian/orig-tar.exclude
@@ -0,0 +1,2 @@
+*.pdf
+
diff --git a/debian/orig-tarball.sh b/debian/orig-tarball.sh
new file mode 100644
index 0000000..c71e5fa
--- /dev/null
+++ b/debian/orig-tarball.sh
@@ -0,0 +1,17 @@
+#!/bin/sh -e
+
+# called by uscan with '--upstream-version' <version> <file>
+PKG=sundials
+VER=$2
+echo "plop :" $3
+tar zxvf $3
+tar -c -z -f $3 -X debian/orig-tar.exclude $PKG-$VER
+rm -rf $PKG-$VER
+# move to directory 'tarballs'
+if [ -r .svn/deb-layout ]; then
+ . .svn/deb-layout
+ mv $TAR $origDir
+ echo "moved $TAR to $origDir"
+fi
+
+exit 0
diff --git a/debian/patches/bashim.diff b/debian/patches/bashim.diff
new file mode 100644
index 0000000..3b3e1ad
--- /dev/null
+++ b/debian/patches/bashim.diff
@@ -0,0 +1,19 @@
+Index: sundials-2.3.0/config/sundials-config.in
+===================================================================
+--- sundials-2.3.0.orig/config/sundials-config.in 2010-03-30 23:15:34.000000000 +0200
++++ sundials-2.3.0/config/sundials-config.in 2010-03-30 23:17:00.000000000 +0200
+@@ -50,10 +50,10 @@
+ shift $(( $OPTIND - 1 ))
+
+ # args check
+-[[ $module ]] || { echo >&2 the -m option and argument must be specified; exit 1; }
+-[[ $vector ]] || { echo >&2 the -t option and argument must be specified; exit 1; }
+-[[ $lang ]] || { echo >&2 the -l option and argument must be specified; exit 1; }
+-[[ $show ]] || { show=both; }
++[ $module ] || { echo >&2 the -m option and argument must be specified; exit 1; }
++[ $vector ] || { echo >&2 the -t option and argument must be specified; exit 1; }
++[ $lang ] || { echo >&2 the -l option and argument must be specified; exit 1; }
++[ $show ] || { show=both; }
+
+ # main
+
diff --git a/debian/patches/cmake.patch b/debian/patches/cmake.patch
new file mode 100644
index 0000000..949cb06
--- /dev/null
+++ b/debian/patches/cmake.patch
@@ -0,0 +1,111 @@
+Index: sundials-2.5.0/CMakeLists.txt
+===================================================================
+--- sundials-2.5.0.orig/CMakeLists.txt 2012-07-09 16:10:55.000000000 +0200
++++ sundials-2.5.0/CMakeLists.txt 2012-07-09 16:14:25.000000000 +0200
+@@ -18,7 +18,7 @@
+
+ # Require a fairly recent cmake version
+
+-CMAKE_MINIMUM_REQUIRED(VERSION 2.2)
++CMAKE_MINIMUM_REQUIRED(VERSION 2.8)
+
+ # Project SUNDIALS (initially only C supported)
+
+@@ -28,9 +28,9 @@
+
+ SET(PACKAGE_BUGREPORT "radu at llnl.gov")
+ SET(PACKAGE_NAME "SUNDIALS")
+-SET(PACKAGE_STRING "SUNDIALS 2.4.0")
++SET(PACKAGE_STRING "SUNDIALS 2.5.0")
+ SET(PACKAGE_TARNAME "sundials")
+-SET(PACKAGE_VERSION "2.4.0")
++SET(PACKAGE_VERSION "2.5.0")
+
+ # Prohibit in-source build
+
+@@ -229,6 +229,7 @@
+
+ IF(UNIX)
+ OPTION(USE_GENERIC_MATH "Use generic (std-c) math libraries" ON)
++ MESSAGE(STATUS "Use generic (std-c) math libraries")
+ IF(USE_GENERIC_MATH)
+ # executables will be linked against -lm
+ SET(EXTRA_LINK_LIBS -lm)
+Index: sundials-2.5.0/config/SundialsLapack.cmake
+===================================================================
+--- sundials-2.5.0.orig/config/SundialsLapack.cmake 2012-07-09 16:10:55.000000000 +0200
++++ sundials-2.5.0/config/SundialsLapack.cmake 2012-07-09 16:14:55.000000000 +0200
+@@ -31,9 +31,9 @@
+ endif(NOT LAPACK_LIBRARIES)
+ # If using a GNU C compiler, it is quite likely we'll want LAPACK_LINKER_FLAGS
+ # to include -lg2c (if not already present)
+-if(CMAKE_COMPILER_IS_GNUCC AND NOT LAPACK_LINKER_FLAGS MATCHES "g2c")
+- set(LAPACK_LINKER_FLAGS "${LAPACK_LINKER_FLAGS} -lg2c")
+-endif(CMAKE_COMPILER_IS_GNUCC AND NOT LAPACK_LINKER_FLAGS MATCHES "g2c")
++if(CMAKE_COMPILER_IS_GNUCC AND NOT LAPACK_LINKER_FLAGS MATCHES "gfortran")
++ set(LAPACK_LINKER_FLAGS "${LAPACK_LINKER_FLAGS} -lgfortran")
++endif(CMAKE_COMPILER_IS_GNUCC AND NOT LAPACK_LINKER_FLAGS MATCHES "gfortran")
+ # If we have the LAPACK libraries, test them
+ if(LAPACK_LIBRARIES)
+ message(STATUS "Looking for LAPACK libraries... OK")
+@@ -69,7 +69,9 @@
+ "}\n")
+ # Attempt to link the "ltest" executable
+ try_compile(LTEST_OK ${LapackTest_DIR} ${LapackTest_DIR}
+- ltest OUTPUT_VARIABLE MY_OUTPUT)
++ ltest
++ LINK_LIBRARIES ${LAPACK_LIBRARIES}
++ OUTPUT_VARIABLE MY_OUTPUT)
+ # To ensure we do not use stuff from the previous attempts,
+ # we must remove the CMakeFiles directory.
+ file(REMOVE_RECURSE ${LapackTest_DIR}/CMakeFiles)
+Index: sundials-2.5.0/config/SundialsFortran.cmake
+===================================================================
+--- sundials-2.5.0.orig/config/SundialsFortran.cmake 2012-07-09 16:10:55.000000000 +0200
++++ sundials-2.5.0/config/SundialsFortran.cmake 2012-07-09 16:14:25.000000000 +0200
+@@ -52,6 +52,7 @@
+ # and an executable "ftest"
+ file(WRITE ${FortranTest_DIR}/CMakeLists.txt
+ "PROJECT(ftest Fortran)\n"
++ "CMAKE_MINIMUM_REQUIRED(VERSION 2.8)\n"
+ "SET(CMAKE_VERBOSE_MAKEFILE ON)\n"
+ "SET(CMAKE_BUILD_TYPE \"${CMAKE_BUILD_TYPE}\")\n"
+ "SET(CMAKE_Fortran_FLAGS \"${CMAKE_Fortran_FLAGS}\")\n"
+@@ -90,6 +91,7 @@
+ # Overwrite CMakeLists.txt with one which will generate the "ctest1" executable
+ file(WRITE ${FortranTest_DIR}/CMakeLists.txt
+ "PROJECT(ctest1 C)\n"
++ "CMAKE_MINIMUM_REQUIRED(VERSION 2.8)\n"
+ "SET(CMAKE_VERBOSE_MAKEFILE ON)\n"
+ "SET(CMAKE_BUILD_TYPE \"${CMAKE_BUILD_TYPE}\")\n"
+ "SET(CMAKE_C_FLAGS \"${CMAKE_C_FLAGS}\")\n"
+@@ -134,6 +136,7 @@
+ # Practically a duplicate of the previous steps.
+ file(WRITE ${FortranTest_DIR}/CMakeLists.txt
+ "PROJECT(ctest2 C)\n"
++ "CMAKE_MINIMUM_REQUIRED(VERSION 2.8)\n"
+ "SET(CMAKE_VERBOSE_MAKEFILE ON)\n"
+ "SET(CMAKE_BUILD_TYPE \"${CMAKE_BUILD_TYPE}\")\n"
+ "SET(CMAKE_C_FLAGS \"${CMAKE_C_FLAGS}\")\n"
+Index: sundials-2.5.0/config/FindLAPACK.cmake
+===================================================================
+--- sundials-2.5.0.orig/config/FindLAPACK.cmake 2012-07-09 16:10:55.000000000 +0200
++++ sundials-2.5.0/config/FindLAPACK.cmake 2012-07-09 16:14:25.000000000 +0200
+@@ -30,7 +30,7 @@
+ check_fortran_function_exists(cheev LAPACK_BLAS_WORKS)
+ mark_as_advanced(LAPACK_BLAS_WORKS)
+ if(LAPACK_BLAS_WORKS)
+- set(LAPACK_FOUND TRUE)
++ #???set(LAPACK_FOUND TRUE)
+ set(LAPACK_LIBRARIES ${BLAS_LIBRARIES})
+ endif(LAPACK_BLAS_WORKS)
+ # Generic LAPACK library?
+@@ -81,7 +81,7 @@
+
+ if(NOT LAPACK_FIND_QUIETLY)
+ if(LAPACK_FOUND)
+- message(STATUS "A library with LAPACK API found.")
++ message(STATUS "A library with LAPACK API found ${LAPACK_LIBRARIES}")
+ else(LAPACK_FOUND)
+ if(LAPACK_FIND_REQUIRED)
+ message(FATAL_ERROR
diff --git a/debian/patches/fix-format-error.patch b/debian/patches/fix-format-error.patch
new file mode 100644
index 0000000..313e326
--- /dev/null
+++ b/debian/patches/fix-format-error.patch
@@ -0,0 +1,65 @@
+Index: sundials-2.4.0/src/cvode/cvode.c
+===================================================================
+--- sundials-2.4.0.orig/src/cvode/cvode.c 2009-05-10 00:22:28.000000000 +0000
++++ sundials-2.4.0/src/cvode/cvode.c 2011-11-12 13:23:18.000000000 +0000
+@@ -4128,7 +4128,7 @@
+
+ #ifndef NO_FPRINTF_OUTPUT
+ fprintf(stderr, "\n[%s ERROR] %s\n ", module, fname);
+- fprintf(stderr, msgfmt);
++ vfprintf(stderr, msgfmt, ap);
+ fprintf(stderr, "\n\n");
+ #endif
+
+Index: sundials-2.4.0/src/cvodes/cvodes.c
+===================================================================
+--- sundials-2.4.0.orig/src/cvodes/cvodes.c 2009-05-10 00:22:35.000000000 +0000
++++ sundials-2.4.0/src/cvodes/cvodes.c 2011-11-12 13:26:19.000000000 +0000
+@@ -8942,7 +8942,7 @@
+
+ #ifndef NO_FPRINTF_OUTPUT
+ fprintf(stderr, "\n[%s ERROR] %s\n ", module, fname);
+- fprintf(stderr, msg);
++ fprintf(stderr, "%s",msg);
+ fprintf(stderr, "\n\n");
+ #endif
+
+Index: sundials-2.4.0/src/ida/ida.c
+===================================================================
+--- sundials-2.4.0.orig/src/ida/ida.c 2009-05-10 00:22:51.000000000 +0000
++++ sundials-2.4.0/src/ida/ida.c 2011-11-12 13:28:56.000000000 +0000
+@@ -3248,7 +3248,7 @@
+
+ #ifndef NO_FPRINTF_OUTPUT
+ fprintf(stderr, "\n[%s ERROR] %s\n ", module, fname);
+- fprintf(stderr, msgfmt);
++ vfprintf(stderr, msgfmt,ap);
+ fprintf(stderr, "\n\n");
+ #endif
+
+Index: sundials-2.4.0/src/idas/idas.c
+===================================================================
+--- sundials-2.4.0.orig/src/idas/idas.c 2009-05-10 00:22:58.000000000 +0000
++++ sundials-2.4.0/src/idas/idas.c 2011-11-12 13:30:16.000000000 +0000
+@@ -7170,7 +7170,7 @@
+
+ #ifndef NO_FPRINTF_OUTPUT
+ fprintf(stderr, "\n[%s ERROR] %s\n ", module, fname);
+- fprintf(stderr, msgfmt);
++ vfprintf(stderr, msgfmt,ap);
+ fprintf(stderr, "\n\n");
+ #endif
+
+Index: sundials-2.4.0/src/kinsol/kinsol.c
+===================================================================
+--- sundials-2.4.0.orig/src/kinsol/kinsol.c 2009-05-10 00:23:08.000000000 +0000
++++ sundials-2.4.0/src/kinsol/kinsol.c 2011-11-12 13:31:25.000000000 +0000
+@@ -1864,7 +1864,7 @@
+
+ #ifndef NO_FPRINTF_OUTPUT
+ fprintf(stderr, "\n[%s ERROR] %s\n ", module, fname);
+- fprintf(stderr, msgfmt);
++ vfprintf(stderr, msgfmt,ap);
+ fprintf(stderr, "\n\n");
+ #endif
+
diff --git a/debian/patches/link-blas-lapack.patch b/debian/patches/link-blas-lapack.patch
new file mode 100644
index 0000000..8b7bc53
--- /dev/null
+++ b/debian/patches/link-blas-lapack.patch
@@ -0,0 +1,104 @@
+Description: Ensure that libraries are linked against BLAS and LAPACK when needed
+ In particular, this ensures that the shared libraries packages have correct
+ dependencies.
+Author: Sébastien Villemot <sebastien at debian.org>
+Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700525
+Forwarded: no
+Last-Update: 2013-02-27
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/src/cvode/Makefile.in
++++ b/src/cvode/Makefile.in
+@@ -42,6 +42,7 @@
+ LIBS = @LIBS@
+
+ LAPACK_ENABLED = @LAPACK_ENABLED@
++BLAS_LAPACK_LIBS = @BLAS_LAPACK_LIBS@
+
+ top_srcdir = $(srcdir)/../..
+
+@@ -88,7 +89,7 @@
+ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(CVODE_LIB) $(CVODE_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
+
+ lib_with_bl: shared $(CVODE_LIB_FILES) $(CVODE_BL_LIB_FILES)
+- $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(CVODE_LIB) $(CVODE_LIB_FILES) $(CVODE_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
++ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(CVODE_LIB) $(CVODE_LIB_FILES) $(CVODE_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) $(BLAS_LAPACK_LIBS) -version-info $(LIB_REVISION)
+
+ install: $(CVODE_LIB)
+ $(mkinstalldirs) $(includedir)/cvode
+--- a/src/cvodes/Makefile.in
++++ b/src/cvodes/Makefile.in
+@@ -42,6 +42,7 @@
+ LIBS = @LIBS@
+
+ LAPACK_ENABLED = @LAPACK_ENABLED@
++BLAS_LAPACK_LIBS = @BLAS_LAPACK_LIBS@
+
+ top_srcdir = $(srcdir)/../..
+
+@@ -88,7 +89,7 @@
+ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(CVODES_LIB) $(CVODES_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
+
+ lib_with_bl: shared $(CVODES_LIB_FILES) $(CVODES_BL_LIB_FILES)
+- $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(CVODES_LIB) $(CVODES_LIB_FILES) $(CVODES_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
++ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(CVODES_LIB) $(CVODES_LIB_FILES) $(CVODES_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) $(BLAS_LAPACK_LIBS) -version-info $(LIB_REVISION)
+
+ install: $(CVODES_LIB)
+ $(mkinstalldirs) $(includedir)/cvodes
+--- a/src/ida/Makefile.in
++++ b/src/ida/Makefile.in
+@@ -42,6 +42,7 @@
+ LIBS = @LIBS@
+
+ LAPACK_ENABLED = @LAPACK_ENABLED@
++BLAS_LAPACK_LIBS = @BLAS_LAPACK_LIBS@
+
+ top_srcdir = $(srcdir)/../..
+
+@@ -88,7 +89,7 @@
+ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(IDA_LIB) $(IDA_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
+
+ lib_with_bl: shared $(IDA_LIB_FILES) $(IDA_BL_LIB_FILES)
+- $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(IDA_LIB) $(IDA_LIB_FILES) $(IDA_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
++ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(IDA_LIB) $(IDA_LIB_FILES) $(IDA_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) $(BLAS_LAPACK_LIBS) -version-info $(LIB_REVISION)
+
+ install: $(IDA_LIB)
+ $(mkinstalldirs) $(includedir)/ida
+--- a/src/idas/Makefile.in
++++ b/src/idas/Makefile.in
+@@ -42,6 +42,7 @@
+ LIBS = @LIBS@
+
+ LAPACK_ENABLED = @LAPACK_ENABLED@
++BLAS_LAPACK_LIBS = @BLAS_LAPACK_LIBS@
+
+ top_srcdir = $(srcdir)/../..
+
+@@ -88,7 +89,7 @@
+ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(IDAS_LIB) $(IDAS_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
+
+ lib_with_bl: shared $(IDAS_LIB_FILES) $(IDAS_BL_LIB_FILES)
+- $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(IDAS_LIB) $(IDAS_LIB_FILES) $(IDAS_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
++ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(IDAS_LIB) $(IDAS_LIB_FILES) $(IDAS_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) $(BLAS_LAPACK_LIBS) -version-info $(LIB_REVISION)
+
+ install: $(IDAS_LIB)
+ $(mkinstalldirs) $(includedir)/idas
+--- a/src/kinsol/Makefile.in
++++ b/src/kinsol/Makefile.in
+@@ -42,6 +42,7 @@
+ LIBS = @LIBS@
+
+ LAPACK_ENABLED = @LAPACK_ENABLED@
++BLAS_LAPACK_LIBS = @BLAS_LAPACK_LIBS@
+
+ top_srcdir = $(srcdir)/../..
+
+@@ -88,7 +89,7 @@
+ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(KINSOL_LIB) $(KINSOL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
+
+ lib_with_bl: shared $(KINSOL_LIB_FILES) $(KINSOL_BL_LIB_FILES)
+- $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(KINSOL_LIB) $(KINSOL_LIB_FILES) $(KINSOL_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) -version-info $(LIB_REVISION)
++ $(LIBTOOL) --mode=link $(CC) $(CFLAGS) -o $(KINSOL_LIB) $(KINSOL_LIB_FILES) $(KINSOL_BL_LIB_FILES) $(SHARED_LIB_FILES) -rpath $(libdir) $(LDFLAGS) $(LIBS) $(BLAS_LAPACK_LIBS) -version-info $(LIB_REVISION)
+
+ install: $(KINSOL_LIB)
+ $(mkinstalldirs) $(includedir)/kinsol
diff --git a/debian/patches/makefile.patch b/debian/patches/makefile.patch
new file mode 100644
index 0000000..8f5ef1c
--- /dev/null
+++ b/debian/patches/makefile.patch
@@ -0,0 +1,465 @@
+Index: sundials-2.4.0/examples/cvode/fcmix_parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/cvode/fcmix_parallel/Makefile.in 2009-05-10 02:22:28.000000000 +0200
++++ sundials-2.4.0/examples/cvode/fcmix_parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -84,7 +84,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_parallel/README $(EXS_INSTDIR)/cvode/fcmix_parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_parallel/$${i}.f $(EXS_INSTDIR)/cvode/fcmix_parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_parallel/$${i}.out $(EXS_INSTDIR)/cvode/fcmix_parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_parallel/$${i} $(EXS_INSTDIR)/cvode/fcmix_parallel/ ; \
+ done
+
+ uninstall:
+@@ -92,7 +92,7 @@
+ rm -f $(EXS_INSTDIR)/cvode/fcmix_parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/cvode/fcmix_parallel/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/cvode/fcmix_parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvode/fcmix_parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/cvode/fcmix_parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/cvode
+Index: sundials-2.4.0/examples/cvode/fcmix_serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/cvode/fcmix_serial/Makefile.in 2009-05-10 02:22:28.000000000 +0200
++++ sundials-2.4.0/examples/cvode/fcmix_serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -93,12 +93,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/README $(EXS_INSTDIR)/cvode/fcmix_serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/$${i}.f $(EXS_INSTDIR)/cvode/fcmix_serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/$${i}.out $(EXS_INSTDIR)/cvode/fcmix_serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/$${i} $(EXS_INSTDIR)/cvode/fcmix_serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/$${i}.f $(EXS_INSTDIR)/cvode/fcmix_serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/$${i}.out $(EXS_INSTDIR)/cvode/fcmix_serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/fcmix_serial/$${i} $(EXS_INSTDIR)/cvode/fcmix_serial/ ; \
+ done ; \
+ fi
+
+@@ -107,12 +107,12 @@
+ rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvode/fcmix_serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/cvode/fcmix_serial
+Index: sundials-2.4.0/examples/cvode/parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/cvode/parallel/Makefile.in 2009-05-10 02:22:28.000000000 +0200
++++ sundials-2.4.0/examples/cvode/parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -82,7 +82,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/parallel/README $(EXS_INSTDIR)/cvode/parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/parallel/$${i}.c $(EXS_INSTDIR)/cvode/parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvode/parallel/$${i}.out $(EXS_INSTDIR)/cvode/parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/parallel/$${i} $(EXS_INSTDIR)/cvode/parallel/ ; \
+ done
+
+ uninstall:
+@@ -90,7 +90,7 @@
+ rm -f $(EXS_INSTDIR)/cvode/parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/cvode/parallel/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/cvode/parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvode/parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/cvode/parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/cvode
+Index: sundials-2.4.0/examples/cvode/serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/cvode/serial/Makefile.in 2009-05-10 02:22:28.000000000 +0200
++++ sundials-2.4.0/examples/cvode/serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -96,12 +96,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/README $(EXS_INSTDIR)/cvode/serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/$${i}.c $(EXS_INSTDIR)/cvode/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/$${i}.out $(EXS_INSTDIR)/cvode/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/$${i} $(EXS_INSTDIR)/cvode/serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/$${i}.c $(EXS_INSTDIR)/cvode/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/$${i}.out $(EXS_INSTDIR)/cvode/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvode/serial/$${i} $(EXS_INSTDIR)/cvode/serial/ ; \
+ done ; \
+ fi
+
+@@ -110,12 +110,12 @@
+ rm -f $(EXS_INSTDIR)/cvode/serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/cvode/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/cvode/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvode/serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/cvode/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/cvode/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvode/serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/cvode/serial
+Index: sundials-2.4.0/examples/cvodes/parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/cvodes/parallel/Makefile.in 2009-05-10 02:22:36.000000000 +0200
++++ sundials-2.4.0/examples/cvodes/parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -85,7 +85,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/parallel/README $(EXS_INSTDIR)/cvodes/parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/parallel/$${i}.c $(EXS_INSTDIR)/cvodes/parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/parallel/$${i}.out $(EXS_INSTDIR)/cvodes/parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/parallel/$${i} $(EXS_INSTDIR)/cvodes/parallel/ ; \
+ done
+
+ uninstall:
+@@ -93,7 +93,7 @@
+ rm -f $(EXS_INSTDIR)/cvodes/parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/cvodes/parallel/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/cvodes/parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvodes/parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/cvodes/parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/cvodes
+Index: sundials-2.4.0/examples/cvodes/serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/cvodes/serial/Makefile.in 2009-05-10 02:22:36.000000000 +0200
++++ sundials-2.4.0/examples/cvodes/serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -103,12 +103,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/README $(EXS_INSTDIR)/cvodes/serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/$${i}.c $(EXS_INSTDIR)/cvodes/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/$${i}.out $(EXS_INSTDIR)/cvodes/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/$${i} $(EXS_INSTDIR)/cvodes/serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/$${i}.c $(EXS_INSTDIR)/cvodes/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/$${i}.out $(EXS_INSTDIR)/cvodes/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/cvodes/serial/$${i} $(EXS_INSTDIR)/cvodes/serial/ ; \
+ done ; \
+ fi
+
+@@ -117,12 +117,12 @@
+ rm -f $(EXS_INSTDIR)/cvodes/serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/cvodes/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/cvodes/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvodes/serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/cvodes/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/cvodes/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/cvodes/serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/cvodes/serial
+Index: sundials-2.4.0/examples/ida/fcmix_parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/ida/fcmix_parallel/Makefile.in 2009-05-10 02:22:51.000000000 +0200
++++ sundials-2.4.0/examples/ida/fcmix_parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -82,7 +82,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_parallel/README $(EXS_INSTDIR)/ida/fcmix_parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_parallel/$${i}.f $(EXS_INSTDIR)/ida/fcmix_parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_parallel/$${i}.out $(EXS_INSTDIR)/ida/fcmix_parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_parallel/$${i} $(EXS_INSTDIR)/ida/fcmix_parallel/ ; \
+ done
+
+ uninstall:
+@@ -90,7 +90,7 @@
+ rm -f $(EXS_INSTDIR)/ida/fcmix_parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/ida/fcmix_parallel/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/ida/fcmix_parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/ida/fcmix_parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/ida/fcmix_parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/ida
+Index: sundials-2.4.0/examples/ida/fcmix_serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/ida/fcmix_serial/Makefile.in 2009-05-10 02:22:51.000000000 +0200
++++ sundials-2.4.0/examples/ida/fcmix_serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -90,12 +90,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/README $(EXS_INSTDIR)/ida/fcmix_serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/$${i}.f $(EXS_INSTDIR)/ida/fcmix_serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/$${i}.out $(EXS_INSTDIR)/ida/fcmix_serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/$${i} $(EXS_INSTDIR)/ida/fcmix_serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/$${i}.f $(EXS_INSTDIR)/ida/fcmix_serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/$${i}.out $(EXS_INSTDIR)/ida/fcmix_serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/ida/fcmix_serial/$${i} $(EXS_INSTDIR)/ida/fcmix_serial/ ; \
+ done ; \
+ fi
+
+@@ -104,12 +104,12 @@
+ rm -f $(EXS_INSTDIR)/ida/fcmix_serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/ida/fcmix_serial/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/ida/fcmix_serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/ida/fcmix_serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/ida/fcmix_serial/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/ida/fcmix_serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/ida/fcmix_serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/ida/fcmix_serial
+Index: sundials-2.4.0/examples/ida/parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/ida/parallel/Makefile.in 2009-05-10 02:22:51.000000000 +0200
++++ sundials-2.4.0/examples/ida/parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -82,7 +82,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/parallel/README $(EXS_INSTDIR)/ida/parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/parallel/$${i}.c $(EXS_INSTDIR)/ida/parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/ida/parallel/$${i}.out $(EXS_INSTDIR)/ida/parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/ida/parallel/$${i} $(EXS_INSTDIR)/ida/parallel/ ; \
+ done
+
+ uninstall:
+@@ -90,7 +90,7 @@
+ rm -f $(EXS_INSTDIR)/ida/parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/ida/parallel/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/ida/parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/ida/parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/ida/parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/ida
+Index: sundials-2.4.0/examples/ida/serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/ida/serial/Makefile.in 2009-05-10 02:22:51.000000000 +0200
++++ sundials-2.4.0/examples/ida/serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -91,12 +91,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/README $(EXS_INSTDIR)/ida/serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/$${i}.c $(EXS_INSTDIR)/ida/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/$${i}.out $(EXS_INSTDIR)/ida/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/$${i} $(EXS_INSTDIR)/ida/serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/$${i}.c $(EXS_INSTDIR)/ida/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/$${i}.out $(EXS_INSTDIR)/ida/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/ida/serial/$${i} $(EXS_INSTDIR)/ida/serial/ ; \
+ done ; \
+ fi
+
+@@ -105,12 +105,12 @@
+ rm -f $(EXS_INSTDIR)/ida/serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/ida/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/ida/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/ida/serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/ida/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/ida/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/ida/serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/ida/serial
+Index: sundials-2.4.0/examples/idas/parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/idas/parallel/Makefile.in 2009-05-10 02:22:58.000000000 +0200
++++ sundials-2.4.0/examples/idas/parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -86,7 +86,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/idas/parallel/README $(EXS_INSTDIR)/idas/parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/idas/parallel/$${i}.c $(EXS_INSTDIR)/idas/parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/idas/parallel/$${i}.out $(EXS_INSTDIR)/idas/parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/idas/parallel/$${i} $(EXS_INSTDIR)/idas/parallel/ ; \
+ done
+
+ uninstall:
+@@ -94,7 +94,7 @@
+ rm -f $(EXS_INSTDIR)/idas/parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/idas/parallel/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/idas/parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/idas/parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/idas/parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/idas
+Index: sundials-2.4.0/examples/idas/serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/idas/serial/Makefile.in 2009-05-10 02:22:58.000000000 +0200
++++ sundials-2.4.0/examples/idas/serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -97,12 +97,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/README $(EXS_INSTDIR)/idas/serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/$${i}.c $(EXS_INSTDIR)/idas/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/$${i}.out $(EXS_INSTDIR)/idas/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/$${i} $(EXS_INSTDIR)/idas/serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/$${i}.c $(EXS_INSTDIR)/idas/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/$${i}.out $(EXS_INSTDIR)/idas/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/idas/serial/$${i} $(EXS_INSTDIR)/idas/serial/ ; \
+ done ; \
+ fi
+
+@@ -111,12 +111,12 @@
+ rm -f $(EXS_INSTDIR)/idas/serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/idas/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/idas/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/idas/serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/idas/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/idas/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/idas/serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/idas/serial
+Index: sundials-2.4.0/examples/kinsol/fcmix_parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/kinsol/fcmix_parallel/Makefile.in 2009-05-10 02:23:08.000000000 +0200
++++ sundials-2.4.0/examples/kinsol/fcmix_parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -82,7 +82,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_parallel/README $(EXS_INSTDIR)/kinsol/fcmix_parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_parallel/$${i}.f $(EXS_INSTDIR)/kinsol/fcmix_parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_parallel/$${i}.out $(EXS_INSTDIR)/kinsol/fcmix_parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_parallel/$${i} $(EXS_INSTDIR)/kinsol/fcmix_parallel/ ; \
+ done
+
+ uninstall:
+@@ -90,7 +90,7 @@
+ rm -f $(EXS_INSTDIR)/kinsol/fcmix_parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/kinsol/fcmix_parallel/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/kinsol/fcmix_parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/kinsol/fcmix_parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/kinsol/fcmix_parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/kinsol
+Index: sundials-2.4.0/examples/kinsol/fcmix_serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/kinsol/fcmix_serial/Makefile.in 2009-05-10 02:23:08.000000000 +0200
++++ sundials-2.4.0/examples/kinsol/fcmix_serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -90,12 +90,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/README $(EXS_INSTDIR)/kinsol/fcmix_serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/$${i}.f $(EXS_INSTDIR)/kinsol/fcmix_serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/$${i}.out $(EXS_INSTDIR)/kinsol/fcmix_serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/$${i} $(EXS_INSTDIR)/kinsol/fcmix_serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/$${i}.f $(EXS_INSTDIR)/kinsol/fcmix_serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/$${i}.out $(EXS_INSTDIR)/kinsol/fcmix_serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/fcmix_serial/$${i} $(EXS_INSTDIR)/kinsol/fcmix_serial/ ; \
+ done ; \
+ fi
+
+@@ -104,12 +104,12 @@
+ rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/$${i}.f ; \
+- rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/kinsol/fcmix_serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/kinsol/fcmix_serial
+Index: sundials-2.4.0/examples/kinsol/parallel/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/kinsol/parallel/Makefile.in 2009-05-10 02:23:08.000000000 +0200
++++ sundials-2.4.0/examples/kinsol/parallel/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -80,7 +80,7 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/parallel/README $(EXS_INSTDIR)/kinsol/parallel/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/parallel/$${i}.c $(EXS_INSTDIR)/kinsol/parallel/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/parallel/$${i}.out $(EXS_INSTDIR)/kinsol/parallel/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/parallel/$${i} $(EXS_INSTDIR)/kinsol/parallel/ ; \
+ done
+
+ uninstall:
+@@ -88,7 +88,7 @@
+ rm -f $(EXS_INSTDIR)/kinsol/parallel/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/kinsol/parallel/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/kinsol/parallel/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/kinsol/parallel/$${i} ; \
+ done
+ $(rminstalldirs) $(EXS_INSTDIR)/kinsol/parallel
+ $(rminstalldirs) $(EXS_INSTDIR)/kinsol
+Index: sundials-2.4.0/examples/kinsol/serial/Makefile.in
+===================================================================
+--- sundials-2.4.0.orig/examples/kinsol/serial/Makefile.in 2009-05-10 02:23:08.000000000 +0200
++++ sundials-2.4.0/examples/kinsol/serial/Makefile.in 2010-03-02 13:40:30.000000000 +0100
+@@ -90,12 +90,12 @@
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/README $(EXS_INSTDIR)/kinsol/serial/
+ for i in ${EXAMPLES} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/$${i}.c $(EXS_INSTDIR)/kinsol/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/$${i}.out $(EXS_INSTDIR)/kinsol/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/$${i} $(EXS_INSTDIR)/kinsol/serial/ ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/$${i}.c $(EXS_INSTDIR)/kinsol/serial/ ; \
+- $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/$${i}.out $(EXS_INSTDIR)/kinsol/serial/ ; \
++ $(INSTALL_FILE) $(top_srcdir)/examples/kinsol/serial/$${i} $(EXS_INSTDIR)/kinsol/serial/ ; \
+ done ; \
+ fi
+
+@@ -104,12 +104,12 @@
+ rm -f $(EXS_INSTDIR)/kinsol/serial/README
+ for i in ${EXAMPLES} ; do \
+ rm -f $(EXS_INSTDIR)/kinsol/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/kinsol/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/kinsol/serial/$${i} ; \
+ done
+ @if test "X${LAPACK_ENABLED}" = "Xyes"; then \
+ for i in ${EXAMPLES_BL} ; do \
+ rm -f $(EXS_INSTDIR)/kinsol/serial/$${i}.c ; \
+- rm -f $(EXS_INSTDIR)/kinsol/serial/$${i}.out ; \
++ rm -f $(EXS_INSTDIR)/kinsol/serial/$${i} ; \
+ done ; \
+ fi
+ $(rminstalldirs) $(EXS_INSTDIR)/kinsol/serial
+Index: sundials-2.5.0/Makefile.in
+===================================================================
+--- sundials-2.5.0.orig/Makefile.in 2012-04-24 09:28:20.000000000 +0200
++++ sundials-2.5.0/Makefile.in 2012-04-24 09:28:23.000000000 +0200
+@@ -59,9 +59,9 @@
+
+ install:
+ $(mkinstalldirs) $(bindir)
+- $(INSTALL_PROG) $(top_builddir)/bin/sundials-config $(bindir)/
+- @if test -f $(top_builddir)/bin/fortran-update.sh ; then \
+- $(INSTALL_PROG) $(top_builddir)/bin/fortran-update.sh $(bindir)/ ;\
++ $(INSTALL_PROG) $(top_srcdir)/bin/sundials-config $(bindir)/
++ @if test -f $(top_srcdir)/bin/fortran-update.sh ; then \
++ $(INSTALL_PROG) $(top_srcdir)/bin/fortran-update.sh $(bindir)/ ;\
+ fi
+ @for i in ${SLV_MODULES} ; do \
+ if test -d $${i} ; then \
diff --git a/debian/patches/modern-ltmain.sh.patch b/debian/patches/modern-ltmain.sh.patch
new file mode 100644
index 0000000..8d538af
--- /dev/null
+++ b/debian/patches/modern-ltmain.sh.patch
@@ -0,0 +1,5878 @@
+Upgrade with the current version to solve the .so extension problem
+(done by Andrey Romanenko)
+
+ -- Rafael Laboissiere <rafael at debian.org> Mon, 8 May 2006 12:32:29 +0200
+
+diff -Nur sundials/config/ltmain.sh sundials.new/config/ltmain.sh
+--- sundials/config/ltmain.sh 2005-08-09 19:32:42.000000000 +0200
++++ sundials.new/config/ltmain.sh 2006-05-05 08:23:35.225280328 +0200
+@@ -1,7 +1,7 @@
+ # ltmain.sh - Provide generalized library-building support services.
+ # NOTE: Changing this file will not affect anything until you rerun configure.
+ #
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+ # Free Software Foundation, Inc.
+ # Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+ #
+@@ -17,13 +17,42 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++SED=/bin/sed
++basename="s,^.*/,,g"
++
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
++
++# The name of this program:
++progname=`echo "$progpath" | $SED $basename`
++modename="$progname"
++
++# Global variables:
++EXIT_SUCCESS=0
++EXIT_FAILURE=1
++
++PROGRAM=ltmain.sh
++PACKAGE=libtool
++VERSION="1.5.22 Debian 1.5.22-4"
++TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
++
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes.
++if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
++
+ # Check that we have a working $echo.
+ if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+@@ -36,7 +65,7 @@
+ :
+ else
+ # Restart under the correct shell, and then maybe $echo will work.
+- exec $SHELL "$0" --no-reexec ${1+"$@"}
++ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+ fi
+
+ if test "X$1" = X--fallback-echo; then
+@@ -45,19 +74,9 @@
+ cat <<EOF
+ $*
+ EOF
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+-# The name of this program.
+-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+-modename="$progname"
+-
+-# Constants.
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.4.3
+-TIMESTAMP=" (1.922.2.110 2002/10/23 01:39:54)"
+-
+ default_mode=
+ help="Try \`$progname --help' for more information."
+ magic="%%%MAGIC variable%%%"
+@@ -69,17 +88,18 @@
+ # metacharacters that are still active within double-quoted strings.
+ Xsed="${SED}"' -e 1s/^X//'
+ sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+-# test EBCDIC or ASCII
+-case `echo A|od -x` in
+- *[Cc]1*) # EBCDIC based system
+- SP2NL="tr '\100' '\n'"
+- NL2SP="tr '\r\n' '\100\100'"
+- ;;
+- *) # Assume ASCII based system
+- SP2NL="tr '\040' '\012'"
+- NL2SP="tr '\015\012' '\040\040'"
+- ;;
+-esac
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++ SP2NL='tr \040 \012'
++ NL2SP='tr \015\012 \040\040'
++ ;;
++ *) # EBCDIC based system
++ SP2NL='tr \100 \n'
++ NL2SP='tr \r\n \100\100'
++ ;;
++esac
+
+ # NLS nuisances.
+ # Only set LANG and LC_ALL to C if already set.
+@@ -94,13 +114,10 @@
+ fi
+
+ # Make sure IFS has a sensible default
+-: ${IFS=" "}
++lt_nl='
++'
++IFS=" $lt_nl"
+
+-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+- echo "$modename: not configured to build any kind of library" 1>&2
+- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
+-fi
+
+ # Global variables.
+ mode=$default_mode
+@@ -111,11 +128,268 @@
+ show="$echo"
+ show_help=
+ execute_dlfiles=
++duplicate_deps=no
++preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
+
++#####################################
++# Shell function definitions:
++# This seems to be the best place for them
++
++# func_mktempdir [string]
++# Make a temporary directory that won't clash with other running
++# libtool processes, and avoids race conditions if possible. If
++# given, STRING is the basename for that directory.
++func_mktempdir ()
++{
++ my_template="${TMPDIR-/tmp}/${1-$progname}"
++
++ if test "$run" = ":"; then
++ # Return a directory name, but don't create it in dry-run mode
++ my_tmpdir="${my_template}-$$"
++ else
++
++ # If mktemp works, use that first and foremost
++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
++
++ if test ! -d "$my_tmpdir"; then
++ # Failing that, at least try and use $RANDOM to avoid a race
++ my_tmpdir="${my_template}-${RANDOM-0}$$"
++
++ save_mktempdir_umask=`umask`
++ umask 0077
++ $mkdir "$my_tmpdir"
++ umask $save_mktempdir_umask
++ fi
++
++ # If we're not in dry-run mode, bomb out on failure
++ test -d "$my_tmpdir" || {
++ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
++ exit $EXIT_FAILURE
++ }
++ fi
++
++ $echo "X$my_tmpdir" | $Xsed
++}
++
++
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
++# Need a lot of goo to handle *both* DLLs and import libs
++# Has to be a shell function in order to 'eat' the argument
++# that is supplied when $file_magic_command is called.
++func_win32_libid ()
++{
++ win32_libid_type="unknown"
++ win32_fileres=`file -L $1 2>/dev/null`
++ case $win32_fileres in
++ *ar\ archive\ import\ library*) # definitely import
++ win32_libid_type="x86 archive import"
++ ;;
++ *ar\ archive*) # could be an import, or static
++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
++ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
++ win32_nmres=`eval $NM -f posix -A $1 | \
++ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
++ case $win32_nmres in
++ import*) win32_libid_type="x86 archive import";;
++ *) win32_libid_type="x86 archive static";;
++ esac
++ fi
++ ;;
++ *DLL*)
++ win32_libid_type="x86 DLL"
++ ;;
++ *executable*) # but shell scripts are "executable" too...
++ case $win32_fileres in
++ *MS\ Windows\ PE\ Intel*)
++ win32_libid_type="x86 DLL"
++ ;;
++ esac
++ ;;
++ esac
++ $echo $win32_libid_type
++}
++
++
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag ()
++{
++ if test -n "$available_tags" && test -z "$tagname"; then
++ CC_quoted=
++ for arg in $CC; do
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ CC_quoted="$CC_quoted $arg"
++ done
++ case $@ in
++ # Blanks in the command may have been stripped by the calling shell,
++ # but not from the CC environment variable when configure was run.
++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
++ # Blanks at the start of $base_compile will cause this to fail
++ # if we don't check for them as well.
++ *)
++ for z in $available_tags; do
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++ # Evaluate the configuration.
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++ CC_quoted=
++ for arg in $CC; do
++ # Double-quote args containing other shell metacharacters.
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ CC_quoted="$CC_quoted $arg"
++ done
++ case "$@ " in
++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
++ # The compiler in the base compile command matches
++ # the one in the tagged configuration.
++ # Assume this is the tagged configuration we want.
++ tagname=$z
++ break
++ ;;
++ esac
++ fi
++ done
++ # If $tagname still isn't set, then no tagged configuration
++ # was found and let the user know that the "--tag" command
++ # line option must be used.
++ if test -z "$tagname"; then
++ $echo "$modename: unable to infer tagged configuration"
++ $echo "$modename: specify a tag with \`--tag'" 1>&2
++ exit $EXIT_FAILURE
++# else
++# $echo "$modename: using $tagname tagged configuration"
++ fi
++ ;;
++ esac
++ fi
++}
++
++
++# func_extract_an_archive dir oldlib
++func_extract_an_archive ()
++{
++ f_ex_an_ar_dir="$1"; shift
++ f_ex_an_ar_oldlib="$1"
++
++ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
++ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
++ :
++ else
++ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
++ exit $EXIT_FAILURE
++ fi
++}
++
++# func_extract_archives gentop oldlib ...
++func_extract_archives ()
++{
++ my_gentop="$1"; shift
++ my_oldlibs=${1+"$@"}
++ my_oldobjs=""
++ my_xlib=""
++ my_xabs=""
++ my_xdir=""
++ my_status=""
++
++ $show "${rm}r $my_gentop"
++ $run ${rm}r "$my_gentop"
++ $show "$mkdir $my_gentop"
++ $run $mkdir "$my_gentop"
++ my_status=$?
++ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
++ exit $my_status
++ fi
++
++ for my_xlib in $my_oldlibs; do
++ # Extract the objects.
++ case $my_xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
++ *) my_xabs=`pwd`"/$my_xlib" ;;
++ esac
++ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
++ my_xdir="$my_gentop/$my_xlib"
++
++ $show "${rm}r $my_xdir"
++ $run ${rm}r "$my_xdir"
++ $show "$mkdir $my_xdir"
++ $run $mkdir "$my_xdir"
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
++ exit $exit_status
++ fi
++ case $host in
++ *-darwin*)
++ $show "Extracting $my_xabs"
++ # Do not bother doing anything if just a dry run
++ if test -z "$run"; then
++ darwin_orig_dir=`pwd`
++ cd $my_xdir || exit $?
++ darwin_archive=$my_xabs
++ darwin_curdir=`pwd`
++ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
++ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
++ if test -n "$darwin_arches"; then
++ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
++ darwin_arch=
++ $show "$darwin_base_archive has multiple architectures $darwin_arches"
++ for darwin_arch in $darwin_arches ; do
++ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
++ cd "$darwin_curdir"
++ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
++ done # $darwin_arches
++ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
++ darwin_file=
++ darwin_files=
++ for darwin_file in $darwin_filelist; do
++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
++ lipo -create -output "$darwin_file" $darwin_files
++ done # $darwin_filelist
++ ${rm}r unfat-$$
++ cd "$darwin_orig_dir"
++ else
++ cd "$darwin_orig_dir"
++ func_extract_an_archive "$my_xdir" "$my_xabs"
++ fi # $darwin_arches
++ fi # $run
++ ;;
++ *)
++ func_extract_an_archive "$my_xdir" "$my_xabs"
++ ;;
++ esac
++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
++ done
++ func_extract_archives_result="$my_oldobjs"
++}
++# End of Shell function definitions
++#####################################
++
++# Darwin sucks
++eval std_shrext=\"$shrext_cmds\"
++
++disable_libs=no
++
+ # Parse our command line options once, thoroughly.
+-while test $# -gt 0
++while test "$#" -gt 0
+ do
+ arg="$1"
+ shift
+@@ -131,6 +405,34 @@
+ execute_dlfiles)
+ execute_dlfiles="$execute_dlfiles $arg"
+ ;;
++ tag)
++ tagname="$arg"
++ preserve_args="${preserve_args}=$arg"
++
++ # Check whether tagname contains only valid characters
++ case $tagname in
++ *[!-_A-Za-z0-9,/]*)
++ $echo "$progname: invalid tag name: $tagname" 1>&2
++ exit $EXIT_FAILURE
++ ;;
++ esac
++
++ case $tagname in
++ CC)
++ # Don't test for the "default" C tag, as we know, it's there, but
++ # not specially marked.
++ ;;
++ *)
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
++ taglist="$taglist $tagname"
++ # Evaluate the configuration.
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
++ else
++ $echo "$progname: ignoring unknown tag $tagname" 1>&2
++ fi
++ ;;
++ esac
++ ;;
+ *)
+ eval "$prev=\$arg"
+ ;;
+@@ -148,18 +450,27 @@
+ ;;
+
+ --version)
+- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+- exit 0
++ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
++ $echo
++ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
++ $echo "This is free software; see the source for copying conditions. There is NO"
++ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++ exit $?
+ ;;
+
+ --config)
+- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+- exit 0
++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
++ # Now print the configurations for the tags.
++ for tagname in $taglist; do
++ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
++ done
++ exit $?
+ ;;
+
+ --debug)
+- echo "$progname: enabling shell trace mode"
++ $echo "$progname: enabling shell trace mode"
+ set -x
++ preserve_args="$preserve_args $arg"
+ ;;
+
+ --dry-run | -n)
+@@ -167,18 +478,18 @@
+ ;;
+
+ --features)
+- echo "host: $host"
++ $echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+- echo "enable shared libraries"
++ $echo "enable shared libraries"
+ else
+- echo "disable shared libraries"
++ $echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+- echo "enable static libraries"
++ $echo "enable static libraries"
+ else
+- echo "disable static libraries"
++ $echo "disable static libraries"
+ fi
+- exit 0
++ exit $?
+ ;;
+
+ --finish) mode="finish" ;;
+@@ -190,6 +501,19 @@
+
+ --quiet | --silent)
+ show=:
++ preserve_args="$preserve_args $arg"
++ ;;
++
++ --tag)
++ prevopt="--tag"
++ prev=tag
++ preserve_args="$preserve_args --tag"
++ ;;
++ --tag=*)
++ set tag "$optarg" ${1+"$@"}
++ shift
++ prev=tag
++ preserve_args="$preserve_args --tag"
+ ;;
+
+ -dlopen)
+@@ -200,7 +524,7 @@
+ -*)
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+
+ *)
+@@ -213,9 +537,21 @@
+ if test -n "$prevopt"; then
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
++case $disable_libs in
++no)
++ ;;
++shared)
++ build_libtool_libs=no
++ build_old_libs=yes
++ ;;
++static)
++ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
++ ;;
++esac
++
+ # If this variable is set in any of the actions, the command in it
+ # will be execed at the end. This prevents here-documents from being
+ # left over by shells.
+@@ -225,8 +561,10 @@
+
+ # Infer the operation mode.
+ if test -z "$mode"; then
++ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
++ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+ case $nonopt in
+- *cc | *++ | gcc* | *-gcc* | xlc*)
++ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+ mode=link
+ for arg
+ do
+@@ -267,7 +605,7 @@
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+@@ -281,158 +619,127 @@
+ modename="$modename: compile"
+ # Get the compilation command and the source file.
+ base_compile=
+- prev=
+- lastarg=
+- srcfile="$nonopt"
++ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
++ suppress_opt=yes
+ suppress_output=
++ arg_mode=normal
++ libobj=
++ later=
+
+- user_target=no
+ for arg
+ do
+- case $prev in
+- "") ;;
+- xcompiler)
+- # Aesthetically quote the previous argument.
+- prev=
+- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-
+- case $arg in
+- # Double-quote args containing other shell metacharacters.
+- # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- arg="\"$arg\""
+- ;;
+- esac
+-
+- # Add the previous argument to base_compile.
+- if test -z "$base_compile"; then
+- base_compile="$lastarg"
+- else
+- base_compile="$base_compile $lastarg"
+- fi
+- continue
+- ;;
+- esac
+-
+- # Accept any command-line options.
+- case $arg in
+- -o)
+- if test "$user_target" != "no"; then
+- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+- exit 1
+- fi
+- user_target=next
++ case $arg_mode in
++ arg )
++ # do not "continue". Instead, add this to base_compile
++ lastarg="$arg"
++ arg_mode=normal
+ ;;
+
+- -static)
+- build_old_libs=yes
++ target )
++ libobj="$arg"
++ arg_mode=normal
+ continue
+ ;;
+
+- -prefer-pic)
+- pic_mode=yes
+- continue
+- ;;
++ normal )
++ # Accept any command-line options.
++ case $arg in
++ -o)
++ if test -n "$libobj" ; then
++ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
++ exit $EXIT_FAILURE
++ fi
++ arg_mode=target
++ continue
++ ;;
+
+- -prefer-non-pic)
+- pic_mode=no
+- continue
+- ;;
++ -static | -prefer-pic | -prefer-non-pic)
++ later="$later $arg"
++ continue
++ ;;
+
+- -Xcompiler)
+- prev=xcompiler
+- continue
+- ;;
++ -no-suppress)
++ suppress_opt=no
++ continue
++ ;;
+
+- -Wc,*)
+- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+- lastarg=
+- save_ifs="$IFS"; IFS=','
+- for arg in $args; do
+- IFS="$save_ifs"
++ -Xcompiler)
++ arg_mode=arg # the next one goes into the "base_compile" arg list
++ continue # The current "srcfile" will either be retained or
++ ;; # replaced later. I would guess that would be a bug.
++
++ -Wc,*)
++ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
++ lastarg=
++ save_ifs="$IFS"; IFS=','
++ for arg in $args; do
++ IFS="$save_ifs"
+
+- # Double-quote args containing other shell metacharacters.
+- # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- arg="\"$arg\""
+- ;;
+- esac
+- lastarg="$lastarg $arg"
+- done
+- IFS="$save_ifs"
+- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ lastarg="$lastarg $arg"
++ done
++ IFS="$save_ifs"
++ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+- # Add the arguments to base_compile.
+- if test -z "$base_compile"; then
+- base_compile="$lastarg"
+- else
++ # Add the arguments to base_compile.
+ base_compile="$base_compile $lastarg"
+- fi
+- continue
+- ;;
+- esac
++ continue
++ ;;
+
+- case $user_target in
+- next)
+- # The next one is the -o target name
+- user_target=yes
+- continue
+- ;;
+- yes)
+- # We got the output file
+- user_target=set
+- libobj="$arg"
+- continue
++ * )
++ # Accept the current argument as the source file.
++ # The previous "srcfile" becomes the current argument.
++ #
++ lastarg="$srcfile"
++ srcfile="$arg"
++ ;;
++ esac # case $arg
+ ;;
+- esac
+-
+- # Accept the current argument as the source file.
+- lastarg="$srcfile"
+- srcfile="$arg"
++ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+-
+- # Backslashify any backslashes, double quotes, and dollar signs.
+- # These are the only characters that are still specially
+- # interpreted inside of double-quoted scrings.
+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
++ case $lastarg in
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
+- case $lastarg in
++ # in scan sets, and some SunOS ksh mistreat backslash-escaping
++ # in scan sets (worked around with variable expansion),
++ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
++ # at all, so we specify them separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ lastarg="\"$lastarg\""
+ ;;
+ esac
+
+- # Add the previous argument to base_compile.
+- if test -z "$base_compile"; then
+- base_compile="$lastarg"
+- else
+- base_compile="$base_compile $lastarg"
+- fi
+- done
++ base_compile="$base_compile $lastarg"
++ done # for arg
+
+- case $user_target in
+- set)
++ case $arg_mode in
++ arg)
++ $echo "$modename: you must specify an argument for -Xcompile"
++ exit $EXIT_FAILURE
+ ;;
+- no)
+- # Get the name of the library object.
+- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
++ target)
++ $echo "$modename: you must specify a target with \`-o'" 1>&2
++ exit $EXIT_FAILURE
+ ;;
+ *)
+- $echo "$modename: you must specify a target with \`-o'" 1>&2
+- exit 1
++ # Get the name of the library object.
++ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+- xform='[cCFSfmso]'
++ xform='[cCFSifmso]'
+ case $libobj in
+ *.ada) xform=ada ;;
+ *.adb) xform=adb ;;
+@@ -440,10 +747,13 @@
+ *.asm) xform=asm ;;
+ *.c++) xform=c++ ;;
+ *.cc) xform=cc ;;
++ *.ii) xform=ii ;;
++ *.class) xform=class ;;
+ *.cpp) xform=cpp ;;
+ *.cxx) xform=cxx ;;
+ *.f90) xform=f90 ;;
+ *.for) xform=for ;;
++ *.java) xform=java ;;
+ esac
+
+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+@@ -452,25 +762,63 @@
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *)
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
++ func_infer_tag $base_compile
++
++ for arg in $later; do
++ case $arg in
++ -static)
++ build_old_libs=yes
++ continue
++ ;;
++
++ -prefer-pic)
++ pic_mode=yes
++ continue
++ ;;
++
++ -prefer-non-pic)
++ pic_mode=no
++ continue
++ ;;
++ esac
++ done
++
++ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
++ case $qlibobj in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ qlibobj="\"$qlibobj\"" ;;
++ esac
++ test "X$libobj" != "X$qlibobj" \
++ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
++ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
++ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$obj"; then
++ xdir=
++ else
++ xdir=$xdir/
++ fi
++ lobj=${xdir}$objdir/$objname
++
+ if test -z "$base_compile"; then
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+- removelist="$obj $libobj"
++ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+- removelist="$libobj"
++ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ $run $rm $removelist
+- trap "$run $rm $removelist; exit 1" 1 2 15
++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+@@ -489,8 +837,9 @@
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+- trap "$run $rm $removelist; exit 1" 1 2 15
++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+ else
++ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+@@ -498,13 +847,13 @@
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+- until $run ln "$0" "$lockfile" 2>/dev/null; do
++ until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+- echo "\
++ $echo "\
+ *** ERROR, $lockfile exists and contains:
+ `cat $lockfile 2>/dev/null`
+
+@@ -516,14 +865,33 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+- echo $srcfile > "$lockfile"
++ $echo "$srcfile" > "$lockfile"
+ fi
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
++ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
++ case $qsrcfile in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ qsrcfile="\"$qsrcfile\"" ;;
++ esac
++
++ $run $rm "$libobj" "${libobj}T"
++
++ # Create a libtool object file (analogous to a ".la" file),
++ # but don't create it if we're doing a dry run.
++ test -z "$run" && cat > ${libobj}T <<EOF
++# $libobj - a libtool object file
++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# Name of the PIC object.
++EOF
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+@@ -531,53 +899,38 @@
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+- # All platforms use -DPIC, to notify preprocessed assembler code.
+- command="$base_compile $srcfile $pic_flag -DPIC"
++ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+- command="$base_compile $srcfile"
++ command="$base_compile $qsrcfile"
+ fi
+- if test "$build_old_libs" = yes; then
+- lo_libobj="$libobj"
+- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$dir" = "X$libobj"; then
+- dir="$objdir"
+- else
+- dir="$dir/$objdir"
+- fi
+- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+- if test -d "$dir"; then
+- $show "$rm $libobj"
+- $run $rm $libobj
+- else
+- $show "$mkdir $dir"
+- $run $mkdir $dir
+- status=$?
+- if test $status -ne 0 && test ! -d $dir; then
+- exit $status
+- fi
++ if test ! -d "${xdir}$objdir"; then
++ $show "$mkdir ${xdir}$objdir"
++ $run $mkdir ${xdir}$objdir
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
++ exit $exit_status
+ fi
+ fi
+- if test "$compiler_o_lo" = yes; then
+- output_obj="$libobj"
+- command="$command -o $output_obj"
+- elif test "$compiler_c_o" = yes; then
+- output_obj="$obj"
+- command="$command -o $output_obj"
++
++ if test -z "$output_obj"; then
++ # Place PIC objects in $objdir
++ command="$command -o $lobj"
+ fi
+
+- $run $rm "$output_obj"
++ $run $rm "$lobj" "$output_obj"
++
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ test -n "$output_obj" && $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+- echo "\
++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++ $echo "\
+ *** ERROR, $lockfile contains:
+ `cat $lockfile 2>/dev/null`
+
+@@ -592,13 +945,13 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+- if test x"$output_obj" != x"$libobj"; then
+- $show "$mv $output_obj $libobj"
+- if $run $mv $output_obj $libobj; then :
++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
++ $show "$mv $output_obj $lobj"
++ if $run $mv $output_obj $lobj; then :
+ else
+ error=$?
+ $run $rm $removelist
+@@ -606,77 +959,50 @@
+ fi
+ fi
+
+- # If we have no pic_flag, then copy the object into place and finish.
+- if (test -z "$pic_flag" || test "$pic_mode" != default) &&
+- test "$build_old_libs" = yes; then
+- # Rename the .lo from within objdir to obj
+- if test -f $obj; then
+- $show $rm $obj
+- $run $rm $obj
+- fi
++ # Append the name of the PIC object to the libtool object file.
++ test -z "$run" && cat >> ${libobj}T <<EOF
++pic_object='$objdir/$objname'
+
+- $show "$mv $libobj $obj"
+- if $run $mv $libobj $obj; then :
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
++EOF
+
+- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$obj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+- # Now arrange that obj and lo_libobj become the same file
+- $show "(cd $xdir && $LN_S $baseobj $libobj)"
+- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+- # Unlock the critical section if it was locked
+- if test "$need_locks" != no; then
+- $run $rm "$lockfile"
+- fi
+- exit 0
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
++ # Allow error messages only from the first compilation.
++ if test "$suppress_opt" = yes; then
++ suppress_output=' >/dev/null 2>&1'
+ fi
++ else
++ # No PIC object so indicate it doesn't exist in the libtool
++ # object file.
++ test -z "$run" && cat >> ${libobj}T <<EOF
++pic_object=none
+
+- # Allow error messages only from the first compilation.
+- suppress_output=' >/dev/null 2>&1'
++EOF
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+- command="$base_compile $srcfile"
++ command="$base_compile $qsrcfile"
+ else
+- # All platforms use -DPIC, to notify preprocessed assembler code.
+- command="$base_compile $srcfile $pic_flag -DPIC"
++ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+- output_obj="$obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+- $run $rm "$output_obj"
++ $run $rm "$obj" "$output_obj"
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+- echo "\
++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++ $echo "\
+ *** ERROR, $lockfile contains:
+ `cat $lockfile 2>/dev/null`
+
+@@ -691,11 +1017,11 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+- if test x"$output_obj" != x"$obj"; then
++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ $show "$mv $output_obj $obj"
+ if $run $mv $output_obj $obj; then :
+ else
+@@ -705,29 +1031,31 @@
+ fi
+ fi
+
+- # Create an invalid libtool object if no PIC, so that we do not
+- # accidentally link it into a program.
+- if test "$build_libtool_libs" != yes; then
+- $show "echo timestamp > $libobj"
+- $run eval "echo timestamp > \$libobj" || exit $?
+- else
+- # Move the .lo from within objdir
+- $show "$mv $libobj $lo_libobj"
+- if $run $mv $libobj $lo_libobj; then :
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
+- fi
++ # Append the name of the non-PIC object the libtool object file.
++ # Only append if the libtool object file exists.
++ test -z "$run" && cat >> ${libobj}T <<EOF
++# Name of the non-PIC object.
++non_pic_object='$objname'
++
++EOF
++ else
++ # Append the name of the non-PIC object the libtool object file.
++ # Only append if the libtool object file exists.
++ test -z "$run" && cat >> ${libobj}T <<EOF
++# Name of the non-PIC object.
++non_pic_object=none
++
++EOF
+ fi
+
++ $run $mv "${libobj}T" "${libobj}"
++
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ $run $rm "$lockfile"
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool link mode
+@@ -738,7 +1066,7 @@
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+- # flag for every libtool invokation.
++ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+@@ -753,6 +1081,7 @@
+ ;;
+ esac
+ libtool_args="$nonopt"
++ base_compile="$nonopt $@"
+ compile_command="$nonopt"
+ finalize_command="$nonopt"
+
+@@ -768,6 +1097,7 @@
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
++ inst_prefix_dir=
+
+ avoid_version=no
+ dlfiles=
+@@ -782,6 +1112,9 @@
+ module=no
+ no_install=no
+ objs=
++ non_pic_objects=
++ notinst_path= # paths that contain not-installed libtool libraries
++ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+@@ -793,6 +1126,9 @@
+ temp_rpath=
+ thread_safe=no
+ vinfo=
++ vinfo_number=no
++
++ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+@@ -806,14 +1142,15 @@
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
++ prefer_static_libs=yes
+ else
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
++ prefer_static_libs=built
+ fi
+ build_libtool_libs=no
+ build_old_libs=yes
+- prefer_static_libs=yes
+ break
+ ;;
+ esac
+@@ -823,7 +1160,7 @@
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+- while test $# -gt 0; do
++ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ case $arg in
+@@ -888,7 +1225,7 @@
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ prev=
+ continue
+@@ -898,18 +1235,140 @@
+ prev=
+ continue
+ ;;
++ inst_prefix)
++ inst_prefix_dir="$arg"
++ prev=
++ continue
++ ;;
++ precious_regex)
++ precious_files_regex="$arg"
++ prev=
++ continue
++ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
++ objectlist)
++ if test -f "$arg"; then
++ save_arg=$arg
++ moreargs=
++ for fil in `cat $save_arg`
++ do
++# moreargs="$moreargs $fil"
++ arg=$fil
++ # A libtool-controlled object.
++
++ # Check to see that this really is a libtool object.
++ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ pic_object=
++ non_pic_object=
++
++ # Read the .lo file
++ # If there is no directory component, then add one.
++ case $arg in
++ */* | *\\*) . $arg ;;
++ *) . ./$arg ;;
++ esac
++
++ if test -z "$pic_object" || \
++ test -z "$non_pic_object" ||
++ test "$pic_object" = none && \
++ test "$non_pic_object" = none; then
++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
++ exit $EXIT_FAILURE
++ fi
++
++ # Extract subdirectory from the argument.
++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$arg"; then
++ xdir=
++ else
++ xdir="$xdir/"
++ fi
++
++ if test "$pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ pic_object="$xdir$pic_object"
++
++ if test "$prev" = dlfiles; then
++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++ dlfiles="$dlfiles $pic_object"
++ prev=
++ continue
++ else
++ # If libtool objects are unsupported, then we need to preload.
++ prev=dlprefiles
++ fi
++ fi
++
++ # CHECK ME: I think I busted this. -Ossama
++ if test "$prev" = dlprefiles; then
++ # Preload the old-style object.
++ dlprefiles="$dlprefiles $pic_object"
++ prev=
++ fi
++
++ # A PIC object.
++ libobjs="$libobjs $pic_object"
++ arg="$pic_object"
++ fi
++
++ # Non-PIC object.
++ if test "$non_pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ non_pic_object="$xdir$non_pic_object"
++
++ # A standard non-PIC object
++ non_pic_objects="$non_pic_objects $non_pic_object"
++ if test -z "$pic_object" || test "$pic_object" = none ; then
++ arg="$non_pic_object"
++ fi
++ else
++ # If the PIC object exists, use it instead.
++ # $xdir was prepended to $pic_object above.
++ non_pic_object="$pic_object"
++ non_pic_objects="$non_pic_objects $non_pic_object"
++ fi
++ else
++ # Only an error if not doing a dry-run.
++ if test -z "$run"; then
++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
++ exit $EXIT_FAILURE
++ else
++ # Dry-run case.
++
++ # Extract subdirectory from the argument.
++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$arg"; then
++ xdir=
++ else
++ xdir="$xdir/"
++ fi
++
++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
++ libobjs="$libobjs $pic_object"
++ non_pic_objects="$non_pic_objects $non_pic_object"
++ fi
++ fi
++ done
++ else
++ $echo "$modename: link input file \`$save_arg' does not exist"
++ exit $EXIT_FAILURE
++ fi
++ arg=$save_arg
++ prev=
++ continue
++ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ if test "$prev" = rpath; then
+@@ -941,13 +1400,33 @@
+ finalize_command="$finalize_command $wl$qarg"
+ continue
+ ;;
++ xcclinker)
++ linker_flags="$linker_flags $qarg"
++ compiler_flags="$compiler_flags $qarg"
++ prev=
++ compile_command="$compile_command $qarg"
++ finalize_command="$finalize_command $qarg"
++ continue
++ ;;
++ shrext)
++ shrext_cmds="$arg"
++ prev=
++ continue
++ ;;
++ darwin_framework|darwin_framework_skip)
++ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ prev=
++ continue
++ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+- fi # test -n $prev
++ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+@@ -989,7 +1468,7 @@
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: more than one -exported-symbols argument is not allowed"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+@@ -999,11 +1478,28 @@
+ continue
+ ;;
+
++ -framework|-arch|-isysroot)
++ case " $CC " in
++ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
++ prev=darwin_framework_skip ;;
++ *) compiler_flags="$compiler_flags $arg"
++ prev=darwin_framework ;;
++ esac
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ continue
++ ;;
++
++ -inst-prefix-dir)
++ prev=inst_prefix
++ continue
++ ;;
++
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+- no/*-*-irix* | no/*-*-nonstopux*)
++ no/*-*-irix* | /*-*-irix*)
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ ;;
+@@ -1020,7 +1516,8 @@
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+- exit 1
++ absdir="$dir"
++ notinst_path="$notinst_path $dir"
+ fi
+ dir="$absdir"
+ ;;
+@@ -1034,10 +1531,15 @@
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
+ esac
++ case :$dllsearchpath: in
++ *":$testbindir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$testbindir";;
++ esac
+ ;;
+ esac
+ continue
+@@ -1046,36 +1548,98 @@
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+- *-*-cygwin* | *-*-pw32* | *-*-beos*)
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+- *-*-mingw* | *-*-os2*)
++ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+- *-*-openbsd* | *-*-freebsd*)
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+- esac
+- elif test "X$arg" = "X-lc_r"; then
+- case $host in
+- *-*-openbsd* | *-*-freebsd*)
+- # Do not include libc_r directly, use -pthread flag.
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # Rhapsody C and math libraries are in the System framework
++ deplibs="$deplibs -framework System"
+ continue
+ ;;
++ *-*-sco3.2v5* | *-*-sco5v6*)
++ # Causes problems with __ctype
++ test "X$arg" = "X-lc" && continue
++ ;;
++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++ # Compiler inserts libc in the correct place for threads to work
++ test "X$arg" = "X-lc" && continue
++ ;;
+ esac
++ elif test "X$arg" = "X-lc_r"; then
++ case $host in
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++ # Do not include libc_r directly, use -pthread flag.
++ continue
++ ;;
++ esac
+ fi
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
++ # Tru64 UNIX uses -model [arg] to determine the layout of C++
++ # classes, name mangling, and exception handling.
++ -model)
++ compile_command="$compile_command $arg"
++ compiler_flags="$compiler_flags $arg"
++ finalize_command="$finalize_command $arg"
++ prev=xcompiler
++ continue
++ ;;
++
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++ compiler_flags="$compiler_flags $arg"
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ continue
++ ;;
++
+ -module)
+ module=yes
+ continue
+ ;;
+
++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
++ # -r[0-9][0-9]* specifies the processor on the SGI compiler
++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
++ # +DA*, +DD* enable 64-bit mode on the HP compiler
++ # -q* pass through compiler args for the IBM compiler
++ # -m* pass through architecture-specific compiler args for GCC
++ # -m*, -t[45]*, -txscale* pass through architecture-specific
++ # compiler args for GCC
++ # -pg pass through profiling flag for GCC
++ # @file GCC response files
++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
++ -t[45]*|-txscale*|@*)
++
++ # Unknown arguments in both finalize_command and compile_command need
++ # to be aesthetically quoted because they are evaled later.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ compiler_flags="$compiler_flags $arg"
++ continue
++ ;;
++
++ -shrext)
++ prev=shrext
++ continue
++ ;;
++
+ -no-fast-install)
+ fast_install=no
+ continue
+@@ -1100,8 +1664,18 @@
+ continue
+ ;;
+
++ -objectlist)
++ prev=objectlist
++ continue
++ ;;
++
+ -o) prev=output ;;
+
++ -precious-files-regex)
++ prev=precious_regex
++ continue
++ ;;
++
+ -release)
+ prev=release
+ continue
+@@ -1124,7 +1698,7 @@
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ case "$xrpath " in
+@@ -1152,6 +1726,11 @@
+ prev=vinfo
+ continue
+ ;;
++ -version-number)
++ prev=vinfo
++ vinfo_number=yes
++ continue
++ ;;
+
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+@@ -1200,6 +1779,11 @@
+ continue
+ ;;
+
++ -XCClinker)
++ prev=xcclinker
++ continue
++ ;;
++
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+@@ -1212,29 +1796,106 @@
+ esac
+ ;;
+
+- *.lo | *.$objext)
+- # A library or standard object.
+- if test "$prev" = dlfiles; then
+- # This file was specified with -dlopen.
+- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+- dlfiles="$dlfiles $arg"
+- prev=
+- continue
+- else
+- # If libtool objects are unsupported, then we need to preload.
+- prev=dlprefiles
++ *.$objext)
++ # A standard object.
++ objs="$objs $arg"
++ ;;
++
++ *.lo)
++ # A libtool-controlled object.
++
++ # Check to see that this really is a libtool object.
++ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ pic_object=
++ non_pic_object=
++
++ # Read the .lo file
++ # If there is no directory component, then add one.
++ case $arg in
++ */* | *\\*) . $arg ;;
++ *) . ./$arg ;;
++ esac
++
++ if test -z "$pic_object" || \
++ test -z "$non_pic_object" ||
++ test "$pic_object" = none && \
++ test "$non_pic_object" = none; then
++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
++ exit $EXIT_FAILURE
++ fi
++
++ # Extract subdirectory from the argument.
++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$arg"; then
++ xdir=
++ else
++ xdir="$xdir/"
++ fi
++
++ if test "$pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ pic_object="$xdir$pic_object"
++
++ if test "$prev" = dlfiles; then
++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++ dlfiles="$dlfiles $pic_object"
++ prev=
++ continue
++ else
++ # If libtool objects are unsupported, then we need to preload.
++ prev=dlprefiles
++ fi
++ fi
++
++ # CHECK ME: I think I busted this. -Ossama
++ if test "$prev" = dlprefiles; then
++ # Preload the old-style object.
++ dlprefiles="$dlprefiles $pic_object"
++ prev=
++ fi
++
++ # A PIC object.
++ libobjs="$libobjs $pic_object"
++ arg="$pic_object"
+ fi
+- fi
+
+- if test "$prev" = dlprefiles; then
+- # Preload the old-style object.
+- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+- prev=
++ # Non-PIC object.
++ if test "$non_pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ non_pic_object="$xdir$non_pic_object"
++
++ # A standard non-PIC object
++ non_pic_objects="$non_pic_objects $non_pic_object"
++ if test -z "$pic_object" || test "$pic_object" = none ; then
++ arg="$non_pic_object"
++ fi
++ else
++ # If the PIC object exists, use it instead.
++ # $xdir was prepended to $pic_object above.
++ non_pic_object="$pic_object"
++ non_pic_objects="$non_pic_objects $non_pic_object"
++ fi
+ else
+- case $arg in
+- *.lo) libobjs="$libobjs $arg" ;;
+- *) objs="$objs $arg" ;;
+- esac
++ # Only an error if not doing a dry-run.
++ if test -z "$run"; then
++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
++ exit $EXIT_FAILURE
++ else
++ # Dry-run case.
++
++ # Extract subdirectory from the argument.
++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$arg"; then
++ xdir=
++ else
++ xdir="$xdir/"
++ fi
++
++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
++ libobjs="$libobjs $pic_object"
++ non_pic_objects="$non_pic_objects $non_pic_object"
++ fi
+ fi
+ ;;
+
+@@ -1285,7 +1946,7 @@
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+@@ -1294,6 +1955,7 @@
+ finalize_command="$finalize_command $arg"
+ fi
+
++ oldlibs=
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ libobjs_save="$libobjs"
+@@ -1314,12 +1976,12 @@
+ output_objdir="$output_objdir/$objdir"
+ fi
+ # Create the object directory.
+- if test ! -d $output_objdir; then
++ if test ! -d "$output_objdir"; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+- status=$?
+- if test $status -ne 0 && test ! -d $output_objdir; then
+- exit $status
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
++ exit $exit_status
+ fi
+ fi
+
+@@ -1328,7 +1990,7 @@
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+@@ -1336,7 +1998,17 @@
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
++ case $host in
++ *cygwin* | *mingw* | *pw32*)
++ # don't eliminate duplications in $postdeps and $predeps
++ duplicate_compiler_generated_deps=yes
++ ;;
++ *)
++ duplicate_compiler_generated_deps=$duplicate_deps
++ ;;
++ esac
+ specialdeplibs=
++
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+@@ -1348,12 +2020,30 @@
+ fi
+ libs="$libs $deplib"
+ done
++
++ if test "$linkmode" = lib; then
++ libs="$predeps $libs $compiler_lib_search_path $postdeps"
++
++ # Compute libraries that are listed more than once in $predeps
++ # $postdeps and mark them as special (i.e., whose duplicates are
++ # not to be eliminated).
++ pre_post_deps=
++ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
++ for pre_post_dep in $predeps $postdeps; do
++ case "$pre_post_deps " in
++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
++ esac
++ pre_post_deps="$pre_post_deps $pre_post_dep"
++ done
++ fi
++ pre_post_deps=
++ fi
++
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+- notinst_path= # paths that contain not-installed libtool libraries
+ case $linkmode in
+ lib)
+ passes="conv link"
+@@ -1362,7 +2052,7 @@
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+@@ -1379,39 +2069,58 @@
+ ;;
+ esac
+ for pass in $passes; do
+- if test $linkmode = prog; then
+- # Determine which files to process
++ if test "$linkmode,$pass" = "lib,link" ||
++ test "$linkmode,$pass" = "prog,scan"; then
++ libs="$deplibs"
++ deplibs=
++ fi
++ if test "$linkmode" = prog; then
+ case $pass in
+- dlopen)
+- libs="$dlfiles"
+- save_deplibs="$deplibs" # Collect dlpreopened libraries
+- deplibs=
+- ;;
++ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ link)
++ libs="$deplibs %DEPLIBS%"
++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++ ;;
+ esac
+ fi
++ if test "$pass" = dlopen; then
++ # Collect dlpreopened libraries
++ save_deplibs="$deplibs"
++ deplibs=
++ fi
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+- -l*)
+- if test $linkmode = oldlib && test $linkmode = obj; then
+- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+- continue
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ compiler_flags="$compiler_flags $deplib"
+ fi
+- if test $pass = conv; then
+- deplibs="$deplib $deplibs"
++ continue
++ ;;
++ -l*)
++ if test "$linkmode" != lib && test "$linkmode" != prog; then
++ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+ continue
+ fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- # Search the libtool library
+- lib="$searchdir/lib${name}.la"
+- if test -f "$lib"; then
+- found=yes
+- break
+- fi
++ for search_ext in .la $std_shrext .so .a; do
++ # Search the libtool library
++ lib="$searchdir/lib${name}${search_ext}"
++ if test -f "$lib"; then
++ if test "$search_ext" = ".la"; then
++ found=yes
++ else
++ found=no
++ fi
++ break 2
++ fi
++ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+@@ -1420,40 +2129,76 @@
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+- test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
++ else # deplib is a libtool library
++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
++ # We need to do some special things here, and not later.
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $deplib "*)
++ if (${SED} -e '2q' $lib |
++ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ library_names=
++ old_library=
++ case $lib in
++ */* | *\\*) . $lib ;;
++ *) . ./$lib ;;
++ esac
++ for l in $old_library $library_names; do
++ ll="$l"
++ done
++ if test "X$ll" = "X$old_library" ; then # only static version available
++ found=no
++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$ladir" = "X$lib" && ladir="."
++ lib=$ladir/$old_library
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++ fi
++ continue
++ fi
++ fi
++ ;;
++ *) ;;
++ esac
++ fi
+ fi
+ ;; # -l
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+- test $pass = conv && continue
++ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ prog)
+- if test $pass = conv; then
++ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+- if test $pass = scan; then
++ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ *)
+- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
++ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+- if test $pass = link; then
++ if test "$pass" = link; then
+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+@@ -1466,30 +2211,45 @@
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+- if test $pass = conv; then
++ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+- if test "$deplibs_check_method" != pass_all; then
+- echo
+- echo "*** Warning: Trying to link with static lib archive $deplib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because the file extensions .$libext of this argument makes me believe"
+- echo "*** that it is just a static archive that I should not used here."
++ valid_a_lib=no
++ case $deplibs_check_method in
++ match_pattern*)
++ set dummy $deplibs_check_method
++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++ if eval $echo \"$deplib\" 2>/dev/null \
++ | $SED 10q \
++ | $EGREP "$match_pattern_regex" > /dev/null; then
++ valid_a_lib=yes
++ fi
++ ;;
++ pass_all)
++ valid_a_lib=yes
++ ;;
++ esac
++ if test "$valid_a_lib" != yes; then
++ $echo
++ $echo "*** Warning: Trying to link with static lib archive $deplib."
++ $echo "*** I have the capability to make that library automatically link in when"
++ $echo "*** you link to this library. But I can only do this if you have a"
++ $echo "*** shared version of the library, which you do not appear to have"
++ $echo "*** because the file extensions .$libext of this argument makes me believe"
++ $echo "*** that it is just a static archive that I should not used here."
+ else
+- echo
+- echo "*** Warning: Linking the shared library $output against the"
+- echo "*** static library $deplib is not portable!"
++ $echo
++ $echo "*** Warning: Linking the shared library $output against the"
++ $echo "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ continue
+ ;;
+ prog)
+- if test $pass != link; then
++ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+@@ -1500,14 +2260,18 @@
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+- if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+- # If there is no dlopen support or we're linking statically,
+- # we need to preload.
+- newdlprefiles="$newdlprefiles $deplib"
+- compile_deplibs="$deplib $compile_deplibs"
+- finalize_deplibs="$deplib $finalize_deplibs"
+- else
+- newdlfiles="$newdlfiles $deplib"
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ elif test "$linkmode" = prog; then
++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ # If there is no dlopen support or we're linking statically,
++ # we need to preload.
++ newdlprefiles="$newdlprefiles $deplib"
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ newdlfiles="$newdlfiles $deplib"
++ fi
+ fi
+ continue
+ ;;
+@@ -1516,17 +2280,17 @@
+ continue
+ ;;
+ esac # case $deplib
+- if test $found = yes || test -f "$lib"; then :
++ if test "$found" = yes || test -f "$lib"; then :
+ else
+- $echo "$modename: cannot find the library \`$lib'" 1>&2
+- exit 1
++ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
++ exit $EXIT_FAILURE
+ fi
+
+ # Check to see that this really is a libtool archive.
+- if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+@@ -1539,8 +2303,11 @@
+ library_names=
+ old_library=
+ # If the library was installed with an old release of libtool,
+- # it will not redefine variable installed.
++ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
++ shouldnotlink=no
++ avoidtemprpath=
++
+
+ # Read the .la file
+ case $lib in
+@@ -1550,19 +2317,18 @@
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+- { test $linkmode = oldlib && test $linkmode = obj; }; then
+- # Add dl[pre]opened files of deplib
++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+- if test $pass = conv; then
++ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+@@ -1577,13 +2343,14 @@
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+- elif test $linkmode != prog && test $linkmode != lib; then
++ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ continue
+ fi # $pass = conv
+
++
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+@@ -1591,19 +2358,23 @@
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # This library was specified with -dlopen.
+- if test $pass = dlopen; then
++ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ if test -z "$dlname" ||
++ test "$dlopen_support" != yes ||
++ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+- # statically, we need to preload.
+- dlprefiles="$dlprefiles $lib"
++ # statically, we need to preload. We also need to preload any
++ # dependent libraries so libltdl's deplib preloader doesn't
++ # bomb out in the load deplibs phase.
++ dlprefiles="$dlprefiles $lib $dependency_libs"
+ else
+ newdlfiles="$newdlfiles $lib"
+ fi
+@@ -1635,19 +2406,27 @@
+ dir="$libdir"
+ absdir="$libdir"
+ fi
++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+- dir="$ladir/$objdir"
+- absdir="$abs_ladir/$objdir"
+- # Remove this search path later
+- notinst_path="$notinst_path $abs_ladir"
++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ dir="$ladir"
++ absdir="$abs_ladir"
++ # Remove this search path later
++ notinst_path="$notinst_path $abs_ladir"
++ else
++ dir="$ladir/$objdir"
++ absdir="$abs_ladir/$objdir"
++ # Remove this search path later
++ notinst_path="$notinst_path $abs_ladir"
++ fi
+ fi # $installed = yes
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+ # This library was specified with -dlpreopen.
+- if test $pass = dlpreopen; then
++ if test "$pass" = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+@@ -1663,18 +2442,19 @@
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+- if test $linkmode = lib; then
++ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+- deplibs="$lib $deplibs"
++ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+- if test $linkmode = prog && test $pass != link; then
++
++ if test "$linkmode" = prog && test "$pass" != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+@@ -1690,7 +2470,7 @@
+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ esac
+ # Need to link against all dependency_libs?
+- if test $linkalldeplibs = yes; then
++ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+@@ -1707,13 +2487,19 @@
+ continue
+ fi # $linkmode = prog...
+
+- link_static=no # Whether the deplib will be linked statically
+- if test -n "$library_names" &&
+- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+- # Link against this shared library
++ if test "$linkmode,$pass" = "prog,link"; then
++ if test -n "$library_names" &&
++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++ # We need to hardcode the library path
++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
++ # Make sure the rpath contains only unique directories.
++ case "$temp_rpath " in
++ *" $dir "*) ;;
++ *" $absdir "*) ;;
++ *) temp_rpath="$temp_rpath $absdir" ;;
++ esac
++ fi
+
+- if test "$linkmode,$pass" = "prog,link" ||
+- { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+@@ -1735,17 +2521,6 @@
+ esac
+ ;;
+ esac
+- if test $linkmode = prog; then
+- # We need to hardcode the library path
+- if test -n "$shlibpath_var"; then
+- # Make sure the rpath contains only unique directories.
+- case "$temp_rpath " in
+- *" $dir "*) ;;
+- *" $absdir "*) ;;
+- *) temp_rpath="$temp_rpath $dir" ;;
+- esac
+- fi
+- fi
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+@@ -1755,11 +2530,56 @@
+ # We only need to search for static libraries
+ continue
+ fi
++ fi
+
++ link_static=no # Whether the deplib will be linked statically
++ use_static_libs=$prefer_static_libs
++ if test "$use_static_libs" = built && test "$installed" = yes ; then
++ use_static_libs=no
++ fi
++ if test -n "$library_names" &&
++ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
++ # This is a shared library
++
++ # Warn about portability, can't link against -module's on
++ # some systems (darwin)
++ if test "$shouldnotlink" = yes && test "$pass" = link ; then
++ $echo
++ if test "$linkmode" = prog; then
++ $echo "*** Warning: Linking the executable $output against the loadable module"
++ else
++ $echo "*** Warning: Linking the shared library $output against the loadable module"
++ fi
++ $echo "*** $linklib is not portable!"
++ fi
++ if test "$linkmode" = lib &&
++ test "$hardcode_into_libs" = yes; then
++ # Hardcode the library path.
++ # Skip directories that are in the system default run-time
++ # search path.
++ case " $sys_lib_dlsearch_path " in
++ *" $absdir "*) ;;
++ *)
++ case "$compile_rpath " in
++ *" $absdir "*) ;;
++ *) compile_rpath="$compile_rpath $absdir"
++ esac
++ ;;
++ esac
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir "*) ;;
++ *)
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir"
++ esac
++ ;;
++ esac
++ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+@@ -1773,7 +2593,7 @@
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+- *cygwin*)
++ *cygwin* | mingw*)
+ major=`expr $current - $age`
+ versuffix="-$major"
+ ;;
+@@ -1785,17 +2605,18 @@
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+- soname=`echo $soroot | ${SED} -e 's/^.*\///'`
+- newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
++ soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
++ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$extract_expsyms_cmds\"
++ cmds=$extract_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -1806,9 +2627,10 @@
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$old_archive_from_expsyms_cmds\"
++ cmds=$old_archive_from_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -1817,9 +2639,9 @@
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+- fi # test -n $old_archive_from_expsyms_cmds
++ fi # test -n "$old_archive_from_expsyms_cmds"
+
+- if test $linkmode = prog || test "$mode" != relink; then
++ if test "$linkmode" = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+@@ -1828,6 +2650,26 @@
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
++ case $host in
++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++ *-*-unixware7*) add_dir="-L$dir" ;;
++ *-*-darwin* )
++ # if the lib is a module then we can not link against
++ # it, someone is ignoring the new warnings I added
++ if /usr/bin/file -L $add 2> /dev/null |
++ $EGREP ": [^:]* bundle" >/dev/null ; then
++ $echo "** Warning, lib $linklib is a module, not a shared library"
++ if test -z "$old_library" ; then
++ $echo
++ $echo "** And there doesn't seem to be a static archive available"
++ $echo "** The link will probably fail, sorry"
++ else
++ add="$dir/$old_library"
++ fi
++ fi
++ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+@@ -1846,6 +2688,14 @@
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
++ # Try looking first in the location we're being installed to.
++ if test -n "$inst_prefix_dir"; then
++ case $libdir in
++ [\\/]*)
++ add_dir="$add_dir -L$inst_prefix_dir$libdir"
++ ;;
++ esac
++ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+@@ -1859,7 +2709,7 @@
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$add_shlibpath"; then
+@@ -1868,7 +2718,7 @@
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+- if test $linkmode = prog; then
++ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+@@ -1885,7 +2735,7 @@
+ fi
+ fi
+
+- if test $linkmode = prog || test "$mode" = relink; then
++ if test "$linkmode" = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+@@ -1901,13 +2751,28 @@
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ add="-l$name"
++ elif test "$hardcode_automatic" = yes; then
++ if test -n "$inst_prefix_dir" &&
++ test -f "$inst_prefix_dir$libdir/$linklib" ; then
++ add="$inst_prefix_dir$libdir/$linklib"
++ else
++ add="$libdir/$linklib"
++ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
++ # Try looking first in the location we're being installed to.
++ if test -n "$inst_prefix_dir"; then
++ case $libdir in
++ [\\/]*)
++ add_dir="$add_dir -L$inst_prefix_dir$libdir"
++ ;;
++ esac
++ fi
+ add="-l$name"
+ fi
+
+- if test $linkmode = prog; then
++ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+@@ -1915,16 +2780,7 @@
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+- elif test $linkmode = prog; then
+- if test "$alldeplibs" = yes &&
+- { test "$deplibs_check_method" = pass_all ||
+- { test "$build_libtool_libs" = yes &&
+- test -n "$library_names"; }; }; then
+- # We only need to search for static libraries
+- continue
+- fi
+-
+- # Try to link the static library
++ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+@@ -1944,21 +2800,21 @@
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+- echo
+- echo "*** Warning: This system can not link to static lib archive $lib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
++ $echo
++ $echo "*** Warning: This system can not link to static lib archive $lib."
++ $echo "*** I have the capability to make that library automatically link in when"
++ $echo "*** you link to this library. But I can only do this if you have a"
++ $echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+- echo "*** But as you try to build a module library, libtool will still create "
+- echo "*** a static module, that should work as long as the dlopening application"
+- echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
++ $echo "*** But as you try to build a module library, libtool will still create "
++ $echo "*** a static module, that should work as long as the dlopening application"
++ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+- echo
+- echo "*** However, this would only work if libtool was able to extract symbol"
+- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+- echo "*** not find such a program. So, this module is probably useless."
+- echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ $echo
++ $echo "*** However, this would only work if libtool was able to extract symbol"
++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ $echo "*** not find such a program. So, this module is probably useless."
++ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+@@ -1968,17 +2824,16 @@
+ fi
+ fi
+ else
+- convenience="$convenience $dir/$old_library"
+- old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+- if test $linkmode = lib; then
++ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+- { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+- test $link_static = yes; }; then
++ { test "$hardcode_into_libs" != yes ||
++ test "$build_old_libs" = yes ||
++ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+@@ -2009,7 +2864,7 @@
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+- if test $link_all_deplibs != no; then
++ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+@@ -2029,38 +2884,83 @@
+ ;;
+ esac
+ if grep "^installed=no" $deplib > /dev/null; then
+- path="-L$absdir/$objdir"
++ path="$absdir/$objdir"
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "$absdir" != "$libdir"; then
+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+- path="-L$absdir"
++ path="$absdir"
+ fi
++ depdepl=
++ case $host in
++ *-*-darwin*)
++ # we do not want to link against static libs,
++ # but need to link against shared
++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++ if test -n "$deplibrary_names" ; then
++ for tmp in $deplibrary_names ; do
++ depdepl=$tmp
++ done
++ if test -f "$path/$depdepl" ; then
++ depdepl="$path/$depdepl"
++ fi
++ # do not add paths which are already there
++ case " $newlib_search_path " in
++ *" $path "*) ;;
++ *) newlib_search_path="$newlib_search_path $path";;
++ esac
++ fi
++ path=""
++ ;;
++ *)
++ path="-L$path"
++ ;;
++ esac
++ ;;
++ -l*)
++ case $host in
++ *-*-darwin*)
++ # Again, we only want to link against shared libraries
++ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
++ for tmp in $newlib_search_path ; do
++ if test -f "$tmp/lib$tmp_libs.dylib" ; then
++ eval depdepl="$tmp/lib$tmp_libs.dylib"
++ break
++ fi
++ done
++ path=""
++ ;;
++ *) continue ;;
++ esac
+ ;;
+ *) continue ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+- *) deplibs="$deplibs $path" ;;
++ *) deplibs="$path $deplibs" ;;
++ esac
++ case " $deplibs " in
++ *" $depdepl "*) ;;
++ *) deplibs="$depdepl $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+- if test $pass = dlpreopen; then
++ dependency_libs="$newdependency_libs"
++ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+- if test $pass != dlopen; then
+- test $pass != scan && dependency_libs="$newdependency_libs"
+- if test $pass != conv; then
++ if test "$pass" != dlopen; then
++ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+@@ -2082,9 +2982,30 @@
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
++ # FIXME: Pedantically, this is the right thing to do, so
++ # that some nasty dependency loop isn't accidentally
++ # broken:
++ #new_libs="$deplib $new_libs"
++ # Pragmatically, this seems to cause very few problems in
++ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
++ -R*) ;;
+ *)
++ # And here is the reason: when a library appears more
++ # than once as an explicit dependence of a library, or
++ # is implicitly linked in more than once by the
++ # compiler, it is considered special, and multiple
++ # occurrences thereof are not removed. Compare this
++ # with having the same library being listed as a
++ # dependency of multiple other libraries: in this case,
++ # we know (pedantically, we assume) the library does not
++ # need to be listed more than once, so we keep only the
++ # last copy. This is not always right, but it is rare
++ # enough that we require users that really mean to play
++ # such unportable linking tricks to link the library
++ # using -Wl,-lname, so that libtool does not consider it
++ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+@@ -2112,19 +3033,32 @@
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+- if test "$pass" = "conv" &&
+- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+- libs="$deplibs" # reset libs
+- deplibs=
+- fi
++ # Last step: remove runtime libs from dependency_libs
++ # (they stay in deplibs)
++ tmp_libs=
++ for i in $dependency_libs ; do
++ case " $predeps $postdeps $compiler_lib_search_path " in
++ *" $i "*)
++ i=""
++ ;;
++ esac
++ if test -n "$i" ; then
++ tmp_libs="$tmp_libs $i"
++ fi
++ done
++ dependency_libs=$tmp_libs
+ done # for pass
+- if test $linkmode = prog; then
++ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
++ if test -n "$deplibs"; then
++ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
++ fi
++
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+ fi
+@@ -2138,7 +3072,7 @@
+ fi
+
+ if test -n "$vinfo"; then
+- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$release"; then
+@@ -2160,17 +3094,19 @@
+ case $outputname in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+@@ -2181,11 +3117,11 @@
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+- exit 1
++ exit $EXIT_FAILURE
+ else
+- echo
+- echo "*** Warning: Linking the shared library $output against the non-libtool"
+- echo "*** objects $objs is not portable!"
++ $echo
++ $echo "*** Warning: Linking the shared library $output against the non-libtool"
++ $echo "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
+ fi
+@@ -2195,7 +3131,7 @@
+ fi
+
+ set dummy $rpath
+- if test $# -gt 2; then
++ if test "$#" -gt 2; then
+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+ fi
+ install_libdir="$2"
+@@ -2204,14 +3140,16 @@
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+- libext=al
++ # Some compilers have problems with a `.al' extension so
++ # convenience libraries should have the same extension an
++ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ if test -n "$vinfo"; then
+- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+ fi
+
+ if test -n "$release"; then
+@@ -2227,45 +3165,87 @@
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+- current="$2"
+- revision="$3"
+- age="$4"
++ # convert absolute version numbers to libtool ages
++ # this retains compatibility with .la files and attempts
++ # to make the code below a bit more comprehensible
++
++ case $vinfo_number in
++ yes)
++ number_major="$2"
++ number_minor="$3"
++ number_revision="$4"
++ #
++ # There are really only two kinds -- those that
++ # use the current revision as the major version
++ # and those that subtract age and use age as
++ # a minor version. But, then there is irix
++ # which has an extra 1 added just for fun
++ #
++ case $version_type in
++ darwin|linux|osf|windows)
++ current=`expr $number_major + $number_minor`
++ age="$number_minor"
++ revision="$number_revision"
++ ;;
++ freebsd-aout|freebsd-elf|sunos)
++ current="$number_major"
++ revision="$number_minor"
++ age="0"
++ ;;
++ irix|nonstopux)
++ current=`expr $number_major + $number_minor - 1`
++ age="$number_minor"
++ revision="$number_minor"
++ ;;
++ *)
++ $echo "$modename: unknown library version type \`$version_type'" 1>&2
++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit $EXIT_FAILURE
++ ;;
++ esac
++ ;;
++ no)
++ current="$2"
++ revision="$3"
++ age="$4"
++ ;;
++ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
++ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $revision in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
++ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $age in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
++ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+- if test $age -gt $current; then
++ if test "$age" -gt "$current"; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Calculate the version variables.
+@@ -2282,7 +3262,7 @@
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ minor_current=`expr $current + 1`
+- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
++ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+@@ -2306,7 +3286,7 @@
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+- while test $loop != 0; do
++ while test "$loop" -ne 0; do
+ iface=`expr $revision - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring_prefix$major.$iface:$verstring"
+@@ -2329,7 +3309,7 @@
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+- while test $loop != 0; do
++ while test "$loop" -ne 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+@@ -2353,20 +3333,19 @@
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+- verstring="0.0"
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+- verstring=""
++ verstring=
+ ;;
+ *)
+ verstring="0.0"
+@@ -2400,9 +3379,30 @@
+ fi
+
+ if test "$mode" != relink; then
+- # Remove our outputs.
+- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
++ # Remove our outputs, but don't remove object files since they
++ # may have been created when compiling PIC objects.
++ removelist=
++ tempremovelist=`$echo "$output_objdir/*"`
++ for p in $tempremovelist; do
++ case $p in
++ *.$objext)
++ ;;
++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++ if test "X$precious_files_regex" != "X"; then
++ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++ then
++ continue
++ fi
++ fi
++ removelist="$removelist $p"
++ ;;
++ *) ;;
++ esac
++ done
++ if test -n "$removelist"; then
++ $show "${rm}r $removelist"
++ $run ${rm}r $removelist
++ fi
+ fi
+
+ # Now set the variables for building old libraries.
+@@ -2415,9 +3415,9 @@
+
+ # Eliminate all temporary directories.
+ for path in $notinst_path; do
+- lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+- deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+- dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
++ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
++ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
++ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+ done
+
+ if test -n "$xrpath"; then
+@@ -2430,7 +3430,7 @@
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+@@ -2468,12 +3468,18 @@
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+- *-*-openbsd* | *-*-freebsd*)
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+- *)
++ *-*-sco3.2v5* | *-*-sco5v6*)
++ # Causes problems with __ctype
++ ;;
++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++ # Compiler inserts libc in the correct place for threads to work
++ ;;
++ *)
+ # Add libc to deplibs on all other systems if necessary.
+- if test $build_libtool_need_lc = "yes"; then
++ if test "$build_libtool_need_lc" = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+@@ -2500,7 +3506,7 @@
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+- # implementing what was already the behaviour.
++ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+@@ -2513,68 +3519,88 @@
+ int main() { return 0; }
+ EOF
+ $rm conftest
+- $CC -o conftest conftest.c $deplibs
+- if test $? -eq 0 ; then
++ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
++ if test "$?" -eq 0 ; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+- name="`expr $i : '-l\(.*\)'`"
++ name=`expr $i : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
+- libname=`eval \\$echo \"$libname_spec\"`
+- deplib_matches=`eval \\$echo \"$library_names_spec\"`
+- set dummy $deplib_matches
+- deplib_match=$2
+- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+- newdeplibs="$newdeplibs $i"
+- else
+- droppeddeps=yes
+- echo
+- echo "*** Warning: dynamic linker does not accept needed library $i."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which I believe you do not have"
+- echo "*** because a test_compile did reveal that the linker did not use it for"
+- echo "*** its dynamic dependency list that programs get resolved with at runtime."
++ if test "$name" != "" && test "$name" -ne "0"; then
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $i "*)
++ newdeplibs="$newdeplibs $i"
++ i=""
++ ;;
++ esac
++ fi
++ if test -n "$i" ; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ deplib_matches=`eval \\$echo \"$library_names_spec\"`
++ set dummy $deplib_matches
++ deplib_match=$2
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ newdeplibs="$newdeplibs $i"
++ else
++ droppeddeps=yes
++ $echo
++ $echo "*** Warning: dynamic linker does not accept needed library $i."
++ $echo "*** I have the capability to make that library automatically link in when"
++ $echo "*** you link to this library. But I can only do this if you have a"
++ $echo "*** shared version of the library, which I believe you do not have"
++ $echo "*** because a test_compile did reveal that the linker did not use it for"
++ $echo "*** its dynamic dependency list that programs get resolved with at runtime."
++ fi
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ else
+- # Error occured in the first compile. Let's try to salvage
++ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+- name="`expr $i : '-l\(.*\)'`"
+- # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
++ name=`expr $i : '-l\(.*\)'`
++ # If $name is empty we are operating on a -L argument.
++ if test "$name" != "" && test "$name" != "0"; then
+ $rm conftest
+- $CC -o conftest conftest.c $i
++ $LTCC $LTCFLAGS -o conftest conftest.c $i
+ # Did it work?
+- if test $? -eq 0 ; then
++ if test "$?" -eq 0 ; then
+ ldd_output=`ldd conftest`
+- libname=`eval \\$echo \"$libname_spec\"`
+- deplib_matches=`eval \\$echo \"$library_names_spec\"`
+- set dummy $deplib_matches
+- deplib_match=$2
+- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+- newdeplibs="$newdeplibs $i"
+- else
+- droppeddeps=yes
+- echo
+- echo "*** Warning: dynamic linker does not accept needed library $i."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because a test_compile did reveal that the linker did not use this one"
+- echo "*** as a dynamic dependency that programs can get resolved with at runtime."
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $i "*)
++ newdeplibs="$newdeplibs $i"
++ i=""
++ ;;
++ esac
++ fi
++ if test -n "$i" ; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ deplib_matches=`eval \\$echo \"$library_names_spec\"`
++ set dummy $deplib_matches
++ deplib_match=$2
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ newdeplibs="$newdeplibs $i"
++ else
++ droppeddeps=yes
++ $echo
++ $echo "*** Warning: dynamic linker does not accept needed library $i."
++ $echo "*** I have the capability to make that library automatically link in when"
++ $echo "*** you link to this library. But I can only do this if you have a"
++ $echo "*** shared version of the library, which you do not appear to have"
++ $echo "*** because a test_compile did reveal that the linker did not use this one"
++ $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
++ fi
+ fi
+ else
+ droppeddeps=yes
+- echo
+- echo "*** Warning! Library $i is needed by this library but I was not able to"
+- echo "*** make it link in! You will probably need to install it or some"
+- echo "*** library that it depends on before this library will be fully"
+- echo "*** functional. Installing it before continuing would be even better."
++ $echo
++ $echo "*** Warning! Library $i is needed by this library but I was not able to"
++ $echo "*** make it link in! You will probably need to install it or some"
++ $echo "*** library that it depends on before this library will be fully"
++ $echo "*** functional. Installing it before continuing would be even better."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+@@ -2586,13 +3612,22 @@
+ set dummy $deplibs_check_method
+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+- name="`expr $a_deplib : '-l\(.*\)'`"
++ name=`expr $a_deplib : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
+- libname=`eval \\$echo \"$libname_spec\"`
+- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+- for potent_lib in $potential_libs; do
++ if test "$name" != "" && test "$name" != "0"; then
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $a_deplib "*)
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ ;;
++ esac
++ fi
++ if test -n "$a_deplib" ; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null \
+ | grep " -> " >/dev/null; then
+@@ -2613,26 +3648,27 @@
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+ | ${SED} 10q \
+- | egrep "$file_magic_regex" > /dev/null; then
++ | $EGREP "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+- done
+- done
++ done
++ done
++ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+- echo
+- echo "*** Warning: linker path does not have real file for library $a_deplib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because I did check the linker path looking for a file starting"
++ $echo
++ $echo "*** Warning: linker path does not have real file for library $a_deplib."
++ $echo "*** I have the capability to make that library automatically link in when"
++ $echo "*** you link to this library. But I can only do this if you have a"
++ $echo "*** shared version of the library, which you do not appear to have"
++ $echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+- echo "*** with $libname but no candidates were found. (...for file magic test)"
++ $echo "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+- echo "*** with $libname and none of the candidates passed a file format test"
+- echo "*** using a file magic. Last file checked: $potlib"
++ $echo "*** with $libname and none of the candidates passed a file format test"
++ $echo "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ else
+@@ -2645,36 +3681,46 @@
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+- name="`expr $a_deplib : '-l\(.*\)'`"
++ name=`expr $a_deplib : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test -n "$name" && test "$name" != "0"; then
+- libname=`eval \\$echo \"$libname_spec\"`
+- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+- for potent_lib in $potential_libs; do
+- potlib="$potent_lib" # see symlink-check below in file_magic test
+- if eval echo \"$potent_lib\" 2>/dev/null \
+- | ${SED} 10q \
+- | egrep "$match_pattern_regex" > /dev/null; then
+- newdeplibs="$newdeplibs $a_deplib"
+- a_deplib=""
+- break 2
+- fi
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $a_deplib "*)
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ ;;
++ esac
++ fi
++ if test -n "$a_deplib" ; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
++ potlib="$potent_lib" # see symlink-check above in file_magic test
++ if eval $echo \"$potent_lib\" 2>/dev/null \
++ | ${SED} 10q \
++ | $EGREP "$match_pattern_regex" > /dev/null; then
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
+ done
+- done
++ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+- echo
+- echo "*** Warning: linker path does not have real file for library $a_deplib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because I did check the linker path looking for a file starting"
++ $echo
++ $echo "*** Warning: linker path does not have real file for library $a_deplib."
++ $echo "*** I have the capability to make that library automatically link in when"
++ $echo "*** you link to this library. But I can only do this if you have a"
++ $echo "*** shared version of the library, which you do not appear to have"
++ $echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+- echo "*** with $libname but no candidates were found. (...for regex pattern test)"
++ $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+- echo "*** with $libname and none of the candidates passed a file format test"
+- echo "*** using a regex pattern. Last file checked: $potlib"
++ $echo "*** with $libname and none of the candidates passed a file format test"
++ $echo "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ else
+@@ -2685,16 +3731,23 @@
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
+- grep . >/dev/null; then
+- echo
++ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
++ -e 's/ -[LR][^ ]*//g'`
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ for i in $predeps $postdeps ; do
++ # can't use Xsed below, because $i might contain '/'
++ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
++ done
++ fi
++ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
++ | grep . >/dev/null; then
++ $echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+- echo "*** Warning: inter-library dependencies are not supported in this platform."
++ $echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+- echo "*** Warning: inter-library dependencies are not known to be supported."
++ $echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+- echo "*** All declared inter-library dependencies are being dropped."
++ $echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ fi
+ ;;
+@@ -2714,17 +3767,17 @@
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+- echo
+- echo "*** Warning: libtool could not satisfy all declared inter-library"
+- echo "*** dependencies of module $libname. Therefore, libtool will create"
+- echo "*** a static module, that should work as long as the dlopening"
+- echo "*** application is linked with the -dlopen flag."
++ $echo
++ $echo "*** Warning: libtool could not satisfy all declared inter-library"
++ $echo "*** dependencies of module $libname. Therefore, libtool will create"
++ $echo "*** a static module, that should work as long as the dlopening"
++ $echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+- echo
+- echo "*** However, this would only work if libtool was able to extract symbol"
+- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+- echo "*** not find such a program. So, this module is probably useless."
+- echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ $echo
++ $echo "*** However, this would only work if libtool was able to extract symbol"
++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ $echo "*** not find such a program. So, this module is probably useless."
++ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+@@ -2734,16 +3787,16 @@
+ build_libtool_libs=no
+ fi
+ else
+- echo "*** The inter-library dependencies that have been dropped here will be"
+- echo "*** automatically added whenever a program is linked with this library"
+- echo "*** or is declared to -dlopen it."
+-
+- if test $allow_undefined = no; then
+- echo
+- echo "*** Since this library must not contain undefined symbols,"
+- echo "*** because either the platform does not support them or"
+- echo "*** it was explicitly requested with -no-undefined,"
+- echo "*** libtool will only create a static version of it."
++ $echo "*** The inter-library dependencies that have been dropped here will be"
++ $echo "*** automatically added whenever a program is linked with this library"
++ $echo "*** or is declared to -dlopen it."
++
++ if test "$allow_undefined" = no; then
++ $echo
++ $echo "*** Since this library must not contain undefined symbols,"
++ $echo "*** because either the platform does not support them or"
++ $echo "*** it was explicitly requested with -no-undefined,"
++ $echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+@@ -2758,6 +3811,35 @@
+ deplibs=$newdeplibs
+ fi
+
++
++ # move library search paths that coincide with paths to not yet
++ # installed libraries to the beginning of the library search list
++ new_libs=
++ for path in $notinst_path; do
++ case " $new_libs " in
++ *" -L$path/$objdir "*) ;;
++ *)
++ case " $deplibs " in
++ *" -L$path/$objdir "*)
++ new_libs="$new_libs -L$path/$objdir" ;;
++ esac
++ ;;
++ esac
++ done
++ for deplib in $deplibs; do
++ case $deplib in
++ -L*)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ done
++ deplibs="$new_libs"
++
++
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+@@ -2765,7 +3847,7 @@
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+- if test $hardcode_into_libs = yes; then
++ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+@@ -2801,7 +3883,11 @@
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
++ if test -n "$hardcode_libdir_flag_spec_ld"; then
++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
++ else
++ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
++ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+@@ -2821,6 +3907,7 @@
+ fi
+
+ # Get the real and link names of the library.
++ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+@@ -2831,31 +3918,17 @@
+ else
+ soname="$realname"
+ fi
+- test -z "$dlname" && dlname=$soname
++ if test -z "$dlname"; then
++ dlname=$soname
++ fi
+
+ lib="$output_objdir/$realname"
++ linknames=
+ for link
+ do
+ linknames="$linknames $link"
+ done
+
+- # Ensure that we have .o objects for linkers which dislike .lo
+- # (e.g. aix) in case we are running --disable-static
+- for obj in $libobjs; do
+- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$obj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+- if test ! -f $xdir/$oldobj; then
+- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+- fi
+- done
+-
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+@@ -2865,17 +3938,29 @@
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+- eval cmds=\"$export_symbols_cmds\"
++ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
++ eval cmd=\"$cmd\"
++ if len=`expr "X$cmd" : ".*"` &&
++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ skipped_export=false
++ else
++ # The command line is too long to execute in one step.
++ $show "using reloadable object file for export list..."
++ skipped_export=:
++ # Break out early, otherwise skipped_export may be
++ # set to false by a later but shorter cmd.
++ break
++ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex"; then
+- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
++ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+ $run eval '$mv "${export_symbols}T" "$export_symbols"'
+ fi
+@@ -2886,46 +3971,30 @@
+ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+ fi
+
++ tmp_deplibs=
++ for test_deplib in $deplibs; do
++ case " $convenience " in
++ *" $test_deplib "*) ;;
++ *)
++ tmp_deplibs="$tmp_deplibs $test_deplib"
++ ;;
++ esac
++ done
++ deplibs="$tmp_deplibs"
++
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
++ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+- else
+- gentop="$output_objdir/${outputname}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "mkdir $gentop"
+- $run mkdir "$gentop"
+- status=$?
+- if test $status -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
++ else
++ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+- for xlib in $convenience; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "mkdir $xdir"
+- $run mkdir "$xdir"
+- status=$?
+- if test $status -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+- done
++ func_extract_archives $gentop $convenience
++ libobjs="$libobjs $func_extract_archives_result"
+ fi
+ fi
+-
++
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linker_flags="$linker_flags $flag"
+@@ -2937,34 +4006,175 @@
+ fi
+
+ # Do each of the archive commands.
++ if test "$module" = yes && test -n "$module_cmds" ; then
++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++ eval test_cmds=\"$module_expsym_cmds\"
++ cmds=$module_expsym_cmds
++ else
++ eval test_cmds=\"$module_cmds\"
++ cmds=$module_cmds
++ fi
++ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval cmds=\"$archive_expsym_cmds\"
++ eval test_cmds=\"$archive_expsym_cmds\"
++ cmds=$archive_expsym_cmds
++ else
++ eval test_cmds=\"$archive_cmds\"
++ cmds=$archive_cmds
++ fi
++ fi
++
++ if test "X$skipped_export" != "X:" &&
++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++ :
+ else
+- save_deplibs="$deplibs"
+- for conv in $convenience; do
+- tmp_deplibs=
+- for test_deplib in $deplibs; do
+- if test "$test_deplib" != "$conv"; then
+- tmp_deplibs="$tmp_deplibs $test_deplib"
++ # The command line is too long to link in one step, link piecewise.
++ $echo "creating reloadable object files..."
++
++ # Save the value of $output and $libobjs because we want to
++ # use them later. If we have whole_archive_flag_spec, we
++ # want to use save_libobjs as it was before
++ # whole_archive_flag_spec was expanded, because we can't
++ # assume the linker understands whole_archive_flag_spec.
++ # This may have to be revisited, in case too many
++ # convenience libraries get linked in and end up exceeding
++ # the spec.
++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
++ save_libobjs=$libobjs
++ fi
++ save_output=$output
++ output_la=`$echo "X$output" | $Xsed -e "$basename"`
++
++ # Clear the reloadable object creation command queue and
++ # initialize k to one.
++ test_cmds=
++ concat_cmds=
++ objlist=
++ delfiles=
++ last_robj=
++ k=1
++ output=$output_objdir/$output_la-${k}.$objext
++ # Loop over the list of objects to be linked.
++ for obj in $save_libobjs
++ do
++ eval test_cmds=\"$reload_cmds $objlist $last_robj\"
++ if test "X$objlist" = X ||
++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++ test "$len" -le "$max_cmd_len"; }; then
++ objlist="$objlist $obj"
++ else
++ # The command $test_cmds is almost too long, add a
++ # command to the queue.
++ if test "$k" -eq 1 ; then
++ # The first file doesn't have a previous command to add.
++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
++ else
++ # All subsequent reloadable object files will link in
++ # the last one created.
++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ fi
+- done
+- deplibs="$tmp_deplibs"
++ last_robj=$output_objdir/$output_la-${k}.$objext
++ k=`expr $k + 1`
++ output=$output_objdir/$output_la-${k}.$objext
++ objlist=$obj
++ len=1
++ fi
++ done
++ # Handle the remaining objects by creating one last
++ # reloadable object file. All subsequent reloadable object
++ # files will link in the last one created.
++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
++
++ if ${skipped_export-false}; then
++ $show "generating symbol list for \`$libname.la'"
++ export_symbols="$output_objdir/$libname.exp"
++ $run $rm $export_symbols
++ libobjs=$output
++ # Append the command to create the export file.
++ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
++ fi
++
++ # Set up a command to remove the reloadable object files
++ # after they are used.
++ i=0
++ while test "$i" -lt "$k"
++ do
++ i=`expr $i + 1`
++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
++ done
++
++ $echo "creating a temporary reloadable object file: $output"
++
++ # Loop through the commands generated above and execute them.
++ save_ifs="$IFS"; IFS='~'
++ for cmd in $concat_cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
+ done
+- eval cmds=\"$archive_cmds\"
+- deplibs="$save_deplibs"
++ IFS="$save_ifs"
++
++ libobjs=$output
++ # Restore the value of output.
++ output=$save_output
++
++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++ fi
++ # Expand the library linking commands again to reset the
++ # value of $libobjs for piecewise linking.
++
++ # Do each of the archive commands.
++ if test "$module" = yes && test -n "$module_cmds" ; then
++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++ cmds=$module_expsym_cmds
++ else
++ cmds=$module_cmds
++ fi
++ else
++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++ cmds=$archive_expsym_cmds
++ else
++ cmds=$archive_cmds
++ fi
++ fi
++
++ # Append the command to remove the reloadable object files
++ # to the just-reset $cmds.
++ eval cmds=\"\$cmds~\$rm $delfiles\"
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+- $run eval "$cmd" || exit $?
++ $run eval "$cmd" || {
++ lt_exit=$?
++
++ # Restore the uninstalled library and exit
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
++ fi
++
++ exit $lt_exit
++ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+- exit 0
++
++ if test -n "$convenience"; then
++ if test -z "$whole_archive_flag_spec"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ fi
++ fi
++
++ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+@@ -3012,7 +4222,7 @@
+ *.lo)
+ if test -n "$objs$old_deplibs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+@@ -3041,38 +4251,10 @@
+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${obj}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "mkdir $gentop"
+- $run mkdir "$gentop"
+- status=$?
+- if test $status -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+ generated="$generated $gentop"
+
+- for xlib in $convenience; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "mkdir $xdir"
+- $run mkdir "$xdir"
+- status=$?
+- if test $status -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+- done
++ func_extract_archives $gentop $convenience
++ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+@@ -3080,10 +4262,11 @@
+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+- eval cmds=\"$reload_cmds\"
++ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -3096,7 +4279,7 @@
+ $run ${rm}r $gentop
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+@@ -3107,37 +4290,24 @@
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+- $show "echo timestamp > $libobj"
+- $run eval "echo timestamp > $libobj" || exit $?
+- exit 0
++ # $show "echo timestamp > $libobj"
++ # $run eval "echo timestamp > $libobj" || exit $?
++ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+- eval cmds=\"$reload_cmds\"
++ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+- else
+- # Just create a symlink.
+- $show $rm $libobj
+- $run $rm $libobj
+- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$libobj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+- $show "(cd $xdir && $LN_S $oldobj $baseobj)"
+- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+ fi
+
+ if test -n "$gentop"; then
+@@ -3145,12 +4315,12 @@
+ $run ${rm}r $gentop
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+- *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
++ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+ esac
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+@@ -3172,16 +4342,48 @@
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+- case $host in
+- *darwin*)
+- # Don't allow lazy linking, it breaks C++ global constructors
+- compile_command="$compile_command ${wl}-bind_at_load"
+- finalize_command="$finalize_command ${wl}-bind_at_load"
+- ;;
+- esac
+ ;;
+ esac
+
++ case $host in
++ *darwin*)
++ # Don't allow lazy linking, it breaks C++ global constructors
++ if test "$tagname" = CXX ; then
++ compile_command="$compile_command ${wl}-bind_at_load"
++ finalize_command="$finalize_command ${wl}-bind_at_load"
++ fi
++ ;;
++ esac
++
++
++ # move library search paths that coincide with paths to not yet
++ # installed libraries to the beginning of the library search list
++ new_libs=
++ for path in $notinst_path; do
++ case " $new_libs " in
++ *" -L$path/$objdir "*) ;;
++ *)
++ case " $compile_deplibs " in
++ *" -L$path/$objdir "*)
++ new_libs="$new_libs -L$path/$objdir" ;;
++ esac
++ ;;
++ esac
++ done
++ for deplib in $compile_deplibs; do
++ case $deplib in
++ -L*)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ done
++ compile_deplibs="$new_libs"
++
++
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
+@@ -3226,10 +4428,15 @@
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
++ case :$dllsearchpath: in
++ *":$testbindir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$testbindir";;
++ esac
+ ;;
+ esac
+ done
+@@ -3332,31 +4539,43 @@
+ done
+
+ if test -n "$exclude_expsyms"; then
+- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ if test -n "$export_symbols_regex"; then
+- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+- export_symbols="$output_objdir/$output.exp"
++ export_symbols="$output_objdir/$outputname.exp"
+ $run $rm $export_symbols
+- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ case $host in
++ *cygwin* | *mingw* )
++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
++ ;;
++ esac
+ else
+- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
++ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ $run eval 'mv "$nlist"T "$nlist"'
++ case $host in
++ *cygwin* | *mingw* )
++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
++ ;;
++ esac
+ fi
+ fi
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+- name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
+- $run eval 'echo ": $name " >> "$nlist"'
++ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
++ $run eval '$echo ": $name " >> "$nlist"'
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+@@ -3365,7 +4584,7 @@
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $mv "$nlist"T "$nlist"
+ fi
+
+@@ -3385,7 +4604,7 @@
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+ else
+- echo '/* NONE */' >> "$output_objdir/$dlsyms"
++ $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ fi
+
+ $echo >> "$output_objdir/$dlsyms" "\
+@@ -3400,7 +4619,26 @@
+ #endif
+
+ /* The mapping between symbol names and symbols. */
++"
++
++ case $host in
++ *cygwin* | *mingw* )
++ $echo >> "$output_objdir/$dlsyms" "\
++/* DATA imports from DLLs on WIN32 can't be const, because
++ runtime relocations are performed -- see ld's documentation
++ on pseudo-relocs */
++struct {
++"
++ ;;
++ * )
++ $echo >> "$output_objdir/$dlsyms" "\
+ const struct {
++"
++ ;;
++ esac
++
++
++ $echo >> "$output_objdir/$dlsyms" "\
+ const char *name;
+ lt_ptr address;
+ }
+@@ -3437,30 +4675,43 @@
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ case "$compile_command " in
+ *" -static "*) ;;
+- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
++ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+ esac;;
+ *-*-hpux*)
+ case "$compile_command " in
+ *" -static "*) ;;
+- *) pic_flag_for_symtable=" $pic_flag -DPIC";;
++ *) pic_flag_for_symtable=" $pic_flag";;
+ esac
+ esac
+
+ # Now compile the dynamic symbol file.
+- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
++ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
++ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+ # Clean up the generated files.
+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+ # Transform the symbol file into the correct name.
+- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ case $host in
++ *cygwin* | *mingw* )
++ if test -f "$output_objdir/${outputname}.def" ; then
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
++ else
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ fi
++ ;;
++ * )
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ ;;
++ esac
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ else
+@@ -3473,7 +4724,7 @@
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+
+- if test $need_relink = no || test "$build_libtool_libs" != yes; then
++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+@@ -3481,7 +4732,7 @@
+ # We have no uninstalled library dependencies, so finalize right now.
+ $show "$link_command"
+ $run eval "$link_command"
+- status=$?
++ exit_status=$?
+
+ # Delete the generated files.
+ if test -n "$dlsyms"; then
+@@ -3489,7 +4740,7 @@
+ $run $rm "$output_objdir/${outputname}S.${objext}"
+ fi
+
+- exit $status
++ exit $exit_status
+ fi
+
+ if test -n "$shlibpath_var"; then
+@@ -3548,7 +4799,7 @@
+ # Link the executable and exit
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+@@ -3603,10 +4854,10 @@
+ fi
+
+ # Quote $echo for shipping.
+- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+- case $0 in
+- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
++ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
++ case $progpath in
++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+@@ -3618,15 +4869,376 @@
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+- *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
++ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+- *cygwin*) exeext=.exe ;;
++ *cygwin*)
++ exeext=.exe
++ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+ *) exeext= ;;
+ esac
+- $rm $output
+- trap "$rm $output; exit 1" 1 2 15
++ case $host in
++ *cygwin* | *mingw* )
++ output_name=`basename $output`
++ output_path=`dirname $output`
++ cwrappersource="$output_path/$objdir/lt-$output_name.c"
++ cwrapper="$output_path/$output_name.exe"
++ $rm $cwrappersource $cwrapper
++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
++
++ cat > $cwrappersource <<EOF
++
++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
++ Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++
++ The $output program cannot be directly executed until all the libtool
++ libraries that it depends on are installed.
++
++ This wrapper executable should never be moved out of the build directory.
++ If it is, it will not operate correctly.
++
++ Currently, it simply execs the wrapper *script* "/bin/sh $output",
++ but could eventually absorb all of the scripts functionality and
++ exec $objdir/$outputname directly.
++*/
++EOF
++ cat >> $cwrappersource<<"EOF"
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <malloc.h>
++#include <stdarg.h>
++#include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <sys/stat.h>
++
++#if defined(PATH_MAX)
++# define LT_PATHMAX PATH_MAX
++#elif defined(MAXPATHLEN)
++# define LT_PATHMAX MAXPATHLEN
++#else
++# define LT_PATHMAX 1024
++#endif
++
++#ifndef DIR_SEPARATOR
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
++#endif
++
++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
++ defined (__OS2__)
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# ifndef DIR_SEPARATOR_2
++# define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++# define PATH_SEPARATOR_2 ';'
++# endif
++#endif
++
++#ifndef DIR_SEPARATOR_2
++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
++#else /* DIR_SEPARATOR_2 */
++# define IS_DIR_SEPARATOR(ch) \
++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
++#endif /* DIR_SEPARATOR_2 */
++
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
++
++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
++#define XFREE(stale) do { \
++ if (stale) { free ((void *) stale); stale = 0; } \
++} while (0)
++
++/* -DDEBUG is fairly common in CFLAGS. */
++#undef DEBUG
++#if defined DEBUGWRAPPER
++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
++#else
++# define DEBUG(format, ...)
++#endif
++
++const char *program_name = NULL;
++
++void * xmalloc (size_t num);
++char * xstrdup (const char *string);
++const char * base_name (const char *name);
++char * find_executable(const char *wrapper);
++int check_executable(const char *path);
++char * strendzap(char *str, const char *pat);
++void lt_fatal (const char *message, ...);
++
++int
++main (int argc, char *argv[])
++{
++ char **newargz;
++ int i;
++
++ program_name = (char *) xstrdup (base_name (argv[0]));
++ DEBUG("(main) argv[0] : %s\n",argv[0]);
++ DEBUG("(main) program_name : %s\n",program_name);
++ newargz = XMALLOC(char *, argc+2);
++EOF
++
++ cat >> $cwrappersource <<EOF
++ newargz[0] = (char *) xstrdup("$SHELL");
++EOF
++
++ cat >> $cwrappersource <<"EOF"
++ newargz[1] = find_executable(argv[0]);
++ if (newargz[1] == NULL)
++ lt_fatal("Couldn't find %s", argv[0]);
++ DEBUG("(main) found exe at : %s\n",newargz[1]);
++ /* we know the script has the same name, without the .exe */
++ /* so make sure newargz[1] doesn't end in .exe */
++ strendzap(newargz[1],".exe");
++ for (i = 1; i < argc; i++)
++ newargz[i+1] = xstrdup(argv[i]);
++ newargz[argc+1] = NULL;
++
++ for (i=0; i<argc+1; i++)
++ {
++ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
++ ;
++ }
++
++EOF
++
++ case $host_os in
++ mingw*)
++ cat >> $cwrappersource <<EOF
++ execv("$SHELL",(char const **)newargz);
++EOF
++ ;;
++ *)
++ cat >> $cwrappersource <<EOF
++ execv("$SHELL",newargz);
++EOF
++ ;;
++ esac
++
++ cat >> $cwrappersource <<"EOF"
++ return 127;
++}
++
++void *
++xmalloc (size_t num)
++{
++ void * p = (void *) malloc (num);
++ if (!p)
++ lt_fatal ("Memory exhausted");
++
++ return p;
++}
++
++char *
++xstrdup (const char *string)
++{
++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
++;
++}
++
++const char *
++base_name (const char *name)
++{
++ const char *base;
++
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ /* Skip over the disk name in MSDOS pathnames. */
++ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
++ name += 2;
++#endif
++
++ for (base = name; *name; name++)
++ if (IS_DIR_SEPARATOR (*name))
++ base = name + 1;
++ return base;
++}
++
++int
++check_executable(const char * path)
++{
++ struct stat st;
++
++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
++ if ((!path) || (!*path))
++ return 0;
++
++ if ((stat (path, &st) >= 0) &&
++ (
++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
++#if defined (S_IXOTH)
++ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
++#endif
++#if defined (S_IXGRP)
++ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
++#endif
++ ((st.st_mode & S_IXUSR) == S_IXUSR))
++ )
++ return 1;
++ else
++ return 0;
++}
++
++/* Searches for the full path of the wrapper. Returns
++ newly allocated full path name if found, NULL otherwise */
++char *
++find_executable (const char* wrapper)
++{
++ int has_slash = 0;
++ const char* p;
++ const char* p_next;
++ /* static buffer for getcwd */
++ char tmp[LT_PATHMAX + 1];
++ int tmp_len;
++ char* concat_name;
++
++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
++
++ if ((wrapper == NULL) || (*wrapper == '\0'))
++ return NULL;
++
++ /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
++ {
++ concat_name = xstrdup (wrapper);
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ }
++ else
++ {
++#endif
++ if (IS_DIR_SEPARATOR (wrapper[0]))
++ {
++ concat_name = xstrdup (wrapper);
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ }
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ }
++#endif
++
++ for (p = wrapper; *p; p++)
++ if (*p == '/')
++ {
++ has_slash = 1;
++ break;
++ }
++ if (!has_slash)
++ {
++ /* no slashes; search PATH */
++ const char* path = getenv ("PATH");
++ if (path != NULL)
++ {
++ for (p = path; *p; p = p_next)
++ {
++ const char* q;
++ size_t p_len;
++ for (q = p; *q; q++)
++ if (IS_PATH_SEPARATOR(*q))
++ break;
++ p_len = q - p;
++ p_next = (*q == '\0' ? q : q + 1);
++ if (p_len == 0)
++ {
++ /* empty path: current directory */
++ if (getcwd (tmp, LT_PATHMAX) == NULL)
++ lt_fatal ("getcwd failed");
++ tmp_len = strlen(tmp);
++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++ memcpy (concat_name, tmp, tmp_len);
++ concat_name[tmp_len] = '/';
++ strcpy (concat_name + tmp_len + 1, wrapper);
++ }
++ else
++ {
++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
++ memcpy (concat_name, p, p_len);
++ concat_name[p_len] = '/';
++ strcpy (concat_name + p_len + 1, wrapper);
++ }
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ }
++ }
++ /* not found in PATH; assume curdir */
++ }
++ /* Relative path | not found in path: prepend cwd */
++ if (getcwd (tmp, LT_PATHMAX) == NULL)
++ lt_fatal ("getcwd failed");
++ tmp_len = strlen(tmp);
++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++ memcpy (concat_name, tmp, tmp_len);
++ concat_name[tmp_len] = '/';
++ strcpy (concat_name + tmp_len + 1, wrapper);
++
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ return NULL;
++}
++
++char *
++strendzap(char *str, const char *pat)
++{
++ size_t len, patlen;
++
++ assert(str != NULL);
++ assert(pat != NULL);
++
++ len = strlen(str);
++ patlen = strlen(pat);
++
++ if (patlen <= len)
++ {
++ str += len - patlen;
++ if (strcmp(str, pat) == 0)
++ *str = '\0';
++ }
++ return str;
++}
++
++static void
++lt_error_core (int exit_status, const char * mode,
++ const char * message, va_list ap)
++{
++ fprintf (stderr, "%s: %s: ", program_name, mode);
++ vfprintf (stderr, message, ap);
++ fprintf (stderr, ".\n");
++
++ if (exit_status >= 0)
++ exit (exit_status);
++}
++
++void
++lt_fatal (const char *message, ...)
++{
++ va_list ap;
++ va_start (ap, message);
++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
++ va_end (ap);
++}
++EOF
++ # we should really use a build-platform specific compiler
++ # here, but OTOH, the wrappers (shell script and this C one)
++ # are only useful if you want to execute the "real" binary.
++ # Since the "real" binary is built for $host, then this
++ # wrapper might as well be built for $host, too.
++ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
++ ;;
++ esac
++ $rm $output
++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+ $echo > $output "\
+ #! $SHELL
+@@ -3642,12 +5254,12 @@
+
+ # Sed substitution that helps us do robust quoting. It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed="${SED}"' -e 1s/^X//'
++Xsed='${SED} -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+ relink_command=\"$relink_command\"
+
+@@ -3702,7 +5314,7 @@
+ "
+
+ if test "$fast_install" = yes; then
+- echo >> $output "\
++ $echo >> $output "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+@@ -3718,7 +5330,7 @@
+ $rm \"\$progdir/\$file\"
+ fi"
+
+- echo >> $output "\
++ $echo >> $output "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+@@ -3726,7 +5338,7 @@
+ else
+ $echo \"\$relink_command_output\" >&2
+ $rm \"\$progdir/\$file\"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+
+@@ -3736,13 +5348,13 @@
+ $rm \"\$progdir/\$file\"
+ fi"
+ else
+- echo >> $output "\
++ $echo >> $output "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+ "
+ fi
+
+- echo >> $output "\
++ $echo >> $output "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+@@ -3753,7 +5365,7 @@
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+- # The second colon is a workaround for a bug in BeOS R4 ${SED}
++ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+@@ -3773,47 +5385,35 @@
+ # Run the actual program with our arguments.
+ "
+ case $host in
+- # win32 systems need to use the prog path for dll
+- # lookup to work
+- *-*-cygwin* | *-*-pw32*)
+- $echo >> $output "\
+- exec \$progdir/\$program \${1+\"\$@\"}
+-"
+- ;;
+-
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2*)
+ $echo >> $output "\
+- exec \$progdir\\\\\$program \${1+\"\$@\"}
++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+ "
+ ;;
+
+ *)
+ $echo >> $output "\
+- # Export the path to the program.
+- PATH=\"\$progdir:\$PATH\"
+- export PATH
+-
+- exec \$program \${1+\"\$@\"}
++ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+ "
+ ;;
+ esac
+ $echo >> $output "\
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ else
+ # The program doesn't exist.
+- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
++ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+- echo \"See the $PACKAGE documentation for more information.\" 1>&2
+- exit 1
++ $echo \"See the $PACKAGE documentation for more information.\" 1>&2
++ exit $EXIT_FAILURE
+ fi
+ fi\
+ "
+ chmod +x $output
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+@@ -3829,74 +5429,130 @@
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
++ oldobjs="$old_deplibs $non_pic_objects"
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "mkdir $gentop"
+- $run mkdir "$gentop"
+- status=$?
+- if test $status -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+ generated="$generated $gentop"
+
+- # Add in members from convenience archives.
+- for xlib in $addlibs; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "mkdir $xdir"
+- $run mkdir "$xdir"
+- status=$?
+- if test $status -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+- done
++ func_extract_archives $gentop $addlibs
++ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+- eval cmds=\"$old_archive_from_new_cmds\"
++ cmds=$old_archive_from_new_cmds
+ else
+- # Ensure that we have .o objects in place in case we decided
+- # not to build a shared library, and have fallen back to building
+- # static libs even though --disable-static was passed!
+- for oldobj in $oldobjs; do
+- if test ! -f $oldobj; then
+- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$oldobj"; then
+- xdir="."
+- else
+- xdir="$xdir"
++ # POSIX demands no paths to be encoded in archives. We have
++ # to avoid creating archives with duplicate basenames if we
++ # might have to extract them afterwards, e.g., when creating a
++ # static archive out of a convenience library, or when linking
++ # the entirety of a libtool archive into another (currently
++ # not supported by libtool).
++ if (for obj in $oldobjs
++ do
++ $echo "X$obj" | $Xsed -e 's%^.*/%%'
++ done | sort | sort -uc >/dev/null 2>&1); then
++ :
++ else
++ $echo "copying selected object files to avoid basename conflicts..."
++
++ if test -z "$gentop"; then
++ gentop="$output_objdir/${outputname}x"
++ generated="$generated $gentop"
++
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "$mkdir $gentop"
++ $run $mkdir "$gentop"
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
++ exit $exit_status
+ fi
+- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+- $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+ fi
+- done
++
++ save_oldobjs=$oldobjs
++ oldobjs=
++ counter=1
++ for obj in $save_oldobjs
++ do
++ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++ case " $oldobjs " in
++ " ") oldobjs=$obj ;;
++ *[\ /]"$objbase "*)
++ while :; do
++ # Make sure we don't pick an alternate name that also
++ # overlaps.
++ newobj=lt$counter-$objbase
++ counter=`expr $counter + 1`
++ case " $oldobjs " in
++ *[\ /]"$newobj "*) ;;
++ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
++ esac
++ done
++ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
++ $run ln "$obj" "$gentop/$newobj" ||
++ $run cp "$obj" "$gentop/$newobj"
++ oldobjs="$oldobjs $gentop/$newobj"
++ ;;
++ *) oldobjs="$oldobjs $obj" ;;
++ esac
++ done
++ fi
+
+ eval cmds=\"$old_archive_cmds\"
++
++ if len=`expr "X$cmds" : ".*"` &&
++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++ cmds=$old_archive_cmds
++ else
++ # the command line is too long to link in one step, link in parts
++ $echo "using piecewise archive linking..."
++ save_RANLIB=$RANLIB
++ RANLIB=:
++ objlist=
++ concat_cmds=
++ save_oldobjs=$oldobjs
++
++ # Is there a better way of finding the last object in the list?
++ for obj in $save_oldobjs
++ do
++ last_oldobj=$obj
++ done
++ for obj in $save_oldobjs
++ do
++ oldobjs="$objlist $obj"
++ objlist="$objlist $obj"
++ eval test_cmds=\"$old_archive_cmds\"
++ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++ test "$len" -le "$max_cmd_len"; then
++ :
++ else
++ # the above command should be used before it gets too long
++ oldobjs=$objlist
++ if test "$obj" = "$last_oldobj" ; then
++ RANLIB=$save_RANLIB
++ fi
++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
++ objlist=
++ fi
++ done
++ RANLIB=$save_RANLIB
++ oldobjs=$objlist
++ if test "X$oldobjs" = "X" ; then
++ eval cmds=\"\$concat_cmds\"
++ else
++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
++ fi
++ fi
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
++ eval cmd=\"$cmd\"
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+@@ -3928,8 +5584,12 @@
+ fi
+ done
+ # Quote the link command for shipping.
+- relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)"
++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++ if test "$hardcode_automatic" = yes ; then
++ relink_command=
++ fi
++
+
+ # Only create the output if not a dry run.
+ if test -z "$run"; then
+@@ -3948,7 +5608,7 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+@@ -3962,7 +5622,7 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdlfiles="$newdlfiles $libdir/$name"
+ done
+@@ -3973,17 +5633,36 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ done
+ dlprefiles="$newdlprefiles"
++ else
++ newdlfiles=
++ for lib in $dlfiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ newdlfiles="$newdlfiles $abs"
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ newdlprefiles="$newdlprefiles $abs"
++ done
++ dlprefiles="$newdlprefiles"
+ fi
+ $rm $output
+ # place dlname in correct position for cygwin
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ esac
+ $echo > $output "\
+ # $outputname - a libtool library file
+@@ -4012,13 +5691,16 @@
+ # Is this an already installed library?
+ installed=$installed
+
++# Should we warn about portability when linking against -modules?
++shouldnotlink=$module
++
+ # Files to dlopen/dlpreopen
+ dlopen='$dlfiles'
+ dlpreopen='$dlprefiles'
+
+ # Directory that this library needs to be installed in:
+ libdir='$install_libdir'"
+- if test "$installed" = no && test $need_relink = yes; then
++ if test "$installed" = no && test "$need_relink" = yes; then
+ $echo >> $output "\
+ relink_command=\"$relink_command\""
+ fi
+@@ -4031,7 +5713,7 @@
+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+ ;;
+ esac
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool install mode
+@@ -4042,11 +5724,11 @@
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
++ $echo "X$nonopt" | grep shtool > /dev/null; then
+ # Aesthetically quote it.
+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+@@ -4055,14 +5737,14 @@
+ shift
+ else
+ install_prog=
+- arg="$nonopt"
++ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+@@ -4080,28 +5762,31 @@
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+- dest="$arg"
++ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+- -f) prev="-f" ;;
+- -g) prev="-g" ;;
+- -m) prev="-m" ;;
+- -o) prev="-o" ;;
++ -f)
++ case " $install_prog " in
++ *[\\\ /]cp\ *) ;;
++ *) prev=$arg ;;
++ esac
++ ;;
++ -g | -m | -o) prev=$arg ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+- -*) ;;
+-
++ -*)
++ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+- dest="$arg"
++ dest=$arg
+ continue
+ fi
+ ;;
+@@ -4110,7 +5795,7 @@
+ # Aesthetically quote the argument.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+@@ -4120,13 +5805,13 @@
+ if test -z "$install_prog"; then
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -z "$files"; then
+@@ -4136,7 +5821,7 @@
+ $echo "$modename: you must specify a destination" 1>&2
+ fi
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Strip any trailing slash from the destination.
+@@ -4154,10 +5839,10 @@
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files
+- if test $# -gt 2; then
++ if test "$#" -gt 2; then
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+ case $destdir in
+@@ -4169,7 +5854,7 @@
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+@@ -4194,11 +5879,11 @@
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ library_names=
+@@ -4229,12 +5914,33 @@
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
++ # Determine the prefix the user has applied to our future dir.
++ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
++
++ # Don't allow the user to place us outside of our expected
++ # location b/c this prevents finding dependent libraries that
++ # are installed to the same prefix.
++ # At present, this check doesn't affect windows .dll's that
++ # are installed into $libdir/../bin (currently, that works fine)
++ # but it's something to keep an eye on.
++ if test "$inst_prefix_dir" = "$destdir"; then
++ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
++ exit $EXIT_FAILURE
++ fi
++
++ if test -n "$inst_prefix_dir"; then
++ # Stick the inst_prefix_dir data into the link command.
++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++ else
++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
++ fi
++
+ $echo "$modename: warning: relinking \`$file'" 1>&2
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+- continue
++ exit $EXIT_FAILURE
+ fi
+ fi
+
+@@ -4256,25 +5962,38 @@
+ $run eval "$striplib $destdir/$realname" || exit $?
+ fi
+
+- if test $# -gt 0; then
++ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
++ # Try `ln -sf' first, because the `ln' binary might depend on
++ # the symlink we replace! Solaris /bin/ln does not understand -f,
++ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ if test "$linkname" != "$realname"; then
+- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
++ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ fi
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+- eval cmds=\"$postinstall_cmds\"
++ cmds=$postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+- $run eval "$cmd" || exit $?
++ $run eval "$cmd" || {
++ lt_exit=$?
++
++ # Restore the uninstalled library and exit
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
++ fi
++
++ exit $lt_exit
++ }
+ done
+ IFS="$save_ifs"
+ fi
+@@ -4312,7 +6031,7 @@
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -4330,7 +6049,7 @@
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+@@ -4342,29 +6061,47 @@
+ destfile="$destdir/$destfile"
+ fi
+
++ # If the file is missing, and there is a .exe on the end, strip it
++ # because it is most likely a libtool script we actually want to
++ # install
++ stripped_ext=""
++ case $file in
++ *.exe)
++ if test ! -f "$file"; then
++ file=`$echo $file|${SED} 's,.exe$,,'`
++ stripped_ext=".exe"
++ fi
++ ;;
++ esac
++
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin*|*mingw*)
+- wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
++ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+- if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
++ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+ notinst_deplibs=
+ relink_command=
+
++ # Note that it is not necessary on cygwin/mingw to append a dot to
++ # foo even if both foo and FILE.exe exist: automatic-append-.exe
++ # behavior happens only for exec(3), not for open(2)! Also, sourcing
++ # `FILE.' does not work on cygwin managed mounts.
++ #
+ # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $wrapper ;;
+- *) . ./$wrapper ;;
++ case $wrapper in
++ */* | *\\*) . ${wrapper} ;;
++ *) . ./${wrapper} ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$notinst_deplibs"; then
+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ finalize=yes
+@@ -4386,24 +6123,22 @@
+ done
+
+ relink_command=
++ # Note that it is not necessary on cygwin/mingw to append a dot to
++ # foo even if both foo and FILE.exe exist: automatic-append-.exe
++ # behavior happens only for exec(3), not for open(2)! Also, sourcing
++ # `FILE.' does not work on cygwin managed mounts.
++ #
+ # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $wrapper ;;
+- *) . ./$wrapper ;;
++ case $wrapper in
++ */* | *\\*) . ${wrapper} ;;
++ *) . ./${wrapper} ;;
+ esac
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ if test "$finalize" = yes && test -z "$run"; then
+- tmpdir="/tmp"
+- test -n "$TMPDIR" && tmpdir="$TMPDIR"
+- tmpdir="$tmpdir/libtool-$$"
+- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+- else
+- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+- continue
+- fi
+- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ tmpdir=`func_mktempdir`
++ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+@@ -4421,14 +6156,14 @@
+ fi
+ else
+ # Install the binary that we compiled earlier.
+- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
++ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+- # one anyways
++ # one anyway
+ case $install_prog,$host in
+- /usr/bin/install*,*cygwin*)
++ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+@@ -4437,7 +6172,7 @@
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+- destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
++ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+ ;;
+ esac
+ ;;
+@@ -4458,16 +6193,17 @@
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
+
+- if test -n "$stripme" && test -n "$striplib"; then
++ if test -n "$stripme" && test -n "$old_striplib"; then
+ $show "$old_striplib $oldlib"
+ $run eval "$old_striplib $oldlib" || exit $?
+ fi
+
+ # Do each command in the postinstall commands.
+- eval cmds=\"$old_postinstall_cmds\"
++ cmds=$old_postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -4481,9 +6217,9 @@
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+- exec_cmd='$SHELL $0 --finish$current_libdirs'
++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+@@ -4502,10 +6238,11 @@
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+- eval cmds=\"$finish_cmds\"
++ cmds=$finish_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
+@@ -4522,43 +6259,43 @@
+ fi
+
+ # Exit here if they wanted silent mode.
+- test "$show" = ":" && exit 0
++ test "$show" = : && exit $EXIT_SUCCESS
+
+- echo "----------------------------------------------------------------------"
+- echo "Libraries have been installed in:"
++ $echo "X----------------------------------------------------------------------" | $Xsed
++ $echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+- echo " $libdir"
++ $echo " $libdir"
+ done
+- echo
+- echo "If you ever happen to want to link against installed libraries"
+- echo "in a given directory, LIBDIR, you must either use libtool, and"
+- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+- echo "flag during linking and do at least one of the following:"
++ $echo
++ $echo "If you ever happen to want to link against installed libraries"
++ $echo "in a given directory, LIBDIR, you must either use libtool, and"
++ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++ $echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+- echo " during execution"
++ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
++ $echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+- echo " during linking"
++ $echo " - add LIBDIR to the \`$runpath_var' environment variable"
++ $echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+- echo " - use the \`$flag' linker flag"
++ $echo " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+- echo " - have your system administrator run these commands:$admincmds"
++ $echo " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+- echo
+- echo "See any operating system documentation about shared libraries for"
+- echo "more information, such as the ld(1) and ld.so(8) manual pages."
+- echo "----------------------------------------------------------------------"
+- exit 0
++ $echo
++ $echo "See any operating system documentation about shared libraries for"
++ $echo "more information, such as the ld(1) and ld.so(8) manual pages."
++ $echo "X----------------------------------------------------------------------" | $Xsed
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool execute mode
+@@ -4570,7 +6307,7 @@
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Handle -dlopen flags immediately.
+@@ -4578,18 +6315,18 @@
+ if test ! -f "$file"; then
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ dir=
+ case $file in
+ *.la)
+ # Check to see that this really is a libtool archive.
+- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Read the libtool library.
+@@ -4616,7 +6353,7 @@
+ dir="$dir/$objdir"
+ else
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ ;;
+
+@@ -4656,7 +6393,7 @@
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+- if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ # If there is no directory component, then add one.
+ case $file in
+ */* | *\\*) . $file ;;
+@@ -4679,7 +6416,7 @@
+ eval "export $shlibpath_var"
+ fi
+
+- # Restore saved enviroment variables
++ # Restore saved environment variables
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+@@ -4696,7 +6433,7 @@
+ $echo "export $shlibpath_var"
+ fi
+ $echo "$cmd$args"
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+@@ -4724,24 +6461,25 @@
+ if test -z "$rm"; then
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ rmdirs=
+
++ origobjdir="$objdir"
+ for file in $files; do
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$file"; then
+ dir=.
+- objdir="$objdir"
++ objdir="$origobjdir"
+ else
+- objdir="$dir/$objdir"
++ objdir="$dir/$origobjdir"
+ fi
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+- test $mode = uninstall && objdir="$dir"
++ test "$mode" = uninstall && objdir="$dir"
+
+ # Remember objdir for removal later, being careful to avoid duplicates
+- if test $mode = clean; then
++ if test "$mode" = clean; then
+ case " $rmdirs " in
+ *" $objdir "*) ;;
+ *) rmdirs="$rmdirs $objdir" ;;
+@@ -4765,7 +6503,7 @@
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ . $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+@@ -4773,18 +6511,27 @@
+ rmfiles="$rmfiles $objdir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+- if test $mode = uninstall; then
++ case "$mode" in
++ clean)
++ case " $library_names " in
++ # " " in the beginning catches empty $dlname
++ *" $dlname "*) ;;
++ *) rmfiles="$rmfiles $objdir/$dlname" ;;
++ esac
++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++ ;;
++ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+- eval cmds=\"$postuninstall_cmds\"
++ cmds=$postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+- if test $? != 0 && test "$rmforce" != yes; then
++ if test "$?" -ne 0 && test "$rmforce" != yes; then
+ exit_status=1
+ fi
+ done
+@@ -4793,40 +6540,72 @@
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+- eval cmds=\"$old_postuninstall_cmds\"
++ cmds=$old_postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+- if test $? != 0 && test "$rmforce" != yes; then
++ if test "$?" -ne 0 && test "$rmforce" != yes; then
+ exit_status=1
+ fi
+ done
+ IFS="$save_ifs"
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+- fi
++ ;;
++ esac
+ fi
+ ;;
+
+ *.lo)
+- if test "$build_old_libs" = yes; then
+- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+- rmfiles="$rmfiles $dir/$oldobj"
++ # Possibly a libtool object, so verify it.
++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++
++ # Read the .lo file
++ . $dir/$name
++
++ # Add PIC object to the list of files to remove.
++ if test -n "$pic_object" \
++ && test "$pic_object" != none; then
++ rmfiles="$rmfiles $dir/$pic_object"
++ fi
++
++ # Add non-PIC object to the list of files to remove.
++ if test -n "$non_pic_object" \
++ && test "$non_pic_object" != none; then
++ rmfiles="$rmfiles $dir/$non_pic_object"
++ fi
+ fi
+ ;;
+
+ *)
+- # Do a test to see if this is a libtool program.
+- if test $mode = clean &&
+- (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+- relink_command=
+- . $dir/$file
++ if test "$mode" = clean ; then
++ noexename=$name
++ case $file in
++ *.exe)
++ file=`$echo $file|${SED} 's,.exe$,,'`
++ noexename=`$echo $name|${SED} 's,.exe$,,'`
++ # $file with .exe has already been added to rmfiles,
++ # add $file without .exe
++ rmfiles="$rmfiles $file"
++ ;;
++ esac
++ # Do a test to see if this is a libtool program.
++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ relink_command=
++ . $dir/$noexename
+
+- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+- if test "$fast_install" = yes && test -n "$relink_command"; then
+- rmfiles="$rmfiles $objdir/lt-$name"
++ # note $name still contains .exe if it was in $file originally
++ # as does the version of $file that was added into $rmfiles
++ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++ if test "$fast_install" = yes && test -n "$relink_command"; then
++ rmfiles="$rmfiles $objdir/lt-$name"
++ fi
++ if test "X$noexename" != "X$name" ; then
++ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
++ fi
+ fi
+ fi
+ ;;
+@@ -4834,6 +6613,7 @@
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles || exit_status=1
+ done
++ objdir="$origobjdir"
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+@@ -4849,20 +6629,20 @@
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test -z "$exec_cmd"; then
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi # test -z "$show_help"
+
+ if test -n "$exec_cmd"; then
+ eval exec $exec_cmd
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # We need to display help for each of the modes.
+@@ -4881,6 +6661,7 @@
+ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
+ --quiet same as \`--silent'
+ --silent don't print informational messages
++ --tag=TAG use configuration variables from tag TAG
+ --version print version information
+
+ MODE must be one of the following:
+@@ -4894,8 +6675,10 @@
+ uninstall remove libraries from an installed directory
+
+ MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
+-a more detailed description of MODE."
+- exit 0
++a more detailed description of MODE.
++
++Report bugs to <bug-libtool at gnu.org>."
++ exit $EXIT_SUCCESS
+ ;;
+
+ clean)
+@@ -5006,6 +6789,9 @@
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
++ -objectlist FILE Use a list of object files found in FILE to specify objects
++ -precious-files-regex REGEX
++ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+@@ -5047,14 +6833,33 @@
+ *)
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+-echo
++$echo
+ $echo "Try \`$modename --help' for more information about other modes."
+
+-exit 0
++exit $?
++
++# The TAGs below are defined such that we never get into a situation
++# in which we disable both kinds of libraries. Given conflicting
++# choices, we go for a static library, that is the most portable,
++# since we can't tell whether shared libraries were disabled because
++# the user asked for that or because the platform doesn't support
++# them. This is particularly important on AIX, because we don't
++# support having both static and shared libraries enabled at the same
++# time on that platform, so we default to a shared-only configuration.
++# If a disable-shared tag is given, we'll fallback to a static-only
++# configuration. But we'll never go from static-only to shared-only.
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
++disable_libs=shared
++# ### END LIBTOOL TAG CONFIG: disable-shared
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-static
++disable_libs=static
++# ### END LIBTOOL TAG CONFIG: disable-static
+
+ # Local Variables:
+ # mode:shell-script
diff --git a/debian/patches/octave-sundialstb.patch b/debian/patches/octave-sundialstb.patch
new file mode 100644
index 0000000..6177f4c
--- /dev/null
+++ b/debian/patches/octave-sundialstb.patch
@@ -0,0 +1,193 @@
+Index: sundials-2.5.0/sundialsTB/install_STB.m
+===================================================================
+--- sundials-2.5.0.orig/sundialsTB/install_STB.m 2012-03-21 23:47:00.000000000 +0100
++++ sundials-2.5.0/sundialsTB/install_STB.m 2012-06-07 10:47:47.000000000 +0200
+@@ -9,7 +9,7 @@
+ % MEX compiler command
+ % --------------------
+
+-mexcompiler = 'mex -v';
++mexcompiler = 'mkoctfile --mex -v';
+
+ % Location of sundialsTB and top of sundials source tree
+ % ------------------------------------------------------
+@@ -46,48 +46,18 @@
+ % Figure out what modules exist and which ones will be built
+ % ----------------------------------------------------------
+
+-fprintf('\n\nSelect modules to be built\n');
++fprintf('\n\nBuild Modules for CVODES, IDAS, KINSOL\n');
+
+-q = fullfile(sun,'src','cvodes');
+-if exist(q, 'dir')
+- answ = input(' Compile CVODES interface? (y/n) ','s');
+- if answ == 'y'
+- cvm_ok = true;
+- else
+- cvm_ok = false;
+- end
+-end
+-
+-if exist(q, 'dir')
+- answ = input(' Compile IDAS interface? (y/n) ','s');
+- if answ == 'y'
+- idm_ok = true;
+- else
+- idm_ok = false;
+- end
+-end
+-
+-q = fullfile(sun,'src','kinsol');
+-if exist(q, 'dir')
+- answ = input(' Compile KINSOL interface? (y/n) ','s');
+- if answ == 'y'
+- kim_ok = true;
+- else
+- kim_ok = false;
+- end
+-end
+-
+-if ~cvm_ok && ~idm_ok && ~kim_ok
+- fprintf('\nOK. All done.\n');
+- return
+-end
++cvm_ok = true;
++idm_ok = true;
++kim_ok = true;
+
+ % Create sundials_config.h
+ % ------------------------
+
+ mkdir('sundials');
+ fi = fopen(fullfile('sundials','sundials_config.h'),'w');
+-fprintf(fi,'#define SUNDIALS_PACKAGE_VERSION "2.4.0"\n');
++fprintf(fi,'#define SUNDIALS_PACKAGE_VERSION "2.5.0"\n');
+ fprintf(fi,'#define SUNDIALS_DOUBLE_PRECISION 1\n');
+ fprintf(fi,'#define SUNDIALS_USE_GENERIC_MATH 1\n');
+ fprintf(fi,'#define SUNDIALS_EXPORT\n');
+@@ -117,17 +87,15 @@
+ % ------------------
+
+ fprintf('\n\nMEX files were successfully created.\n');
+-answ = input(' Install toolbox? (y/n) ','s');
+-if answ ~= 'y'
+- fprintf('\n\nOK. All done.\n');
+- return
+-end
++fprintf('\n\nInstall toolbox.\n');
++answ = 'y'
+
+ while true
+ fprintf('\n\nSpecify the location where you wish to install the toolbox.\n');
+ fprintf('The toolbox will be installed in a subdirectory "sundialsTB".\n');
+ fprintf('Enter return to cancel the installation.\n');
+- where = input(' Installation directory: ','s');
++ %where = input(' Installation directory: ','s');
++ where = './octave';
+ if isempty(where)
+ go = 0;
+ break;
+@@ -149,7 +117,8 @@
+ go = 1;
+ if exist(stbi,'dir')
+ fprintf('\n\nDirectory %s exists!\n',stbi);
+- answ = input(' Replace? (y/n) ','s');
++ %answ = input(' Replace? (y/n) ','s');
++ answ = 'y';
+ if answ == 'y'
+ rmdir(stbi,'s');
+ go = 1;
+@@ -210,11 +179,14 @@
+ fprintf('add a call to %s\n',fullfile(stbi,'startup_STB.m'));
+ fprintf('\nEnjoy!\n\n');
+
++exit
++endfunction
++
+ %---------------------------------------------------------------------------------
+ % Check if mex works and if the user accepts the current mexopts
+ %---------------------------------------------------------------------------------
+
+-function mex_ok = check_mex(mexcompiler)
++function mex_ok = check_mex (mexcompiler)
+
+ % Create a dummy file
+ fid = fopen('foo.c', 'w');
+@@ -232,7 +204,8 @@
+ delete(sprintf('foo.%s', mexext))
+
+ fprintf('\n\nMEX files will be compiled and built using the above options\n');
+-answ = input(' Proceed? (y/n) ','s');
++%answ = input(' Proceed? (y/n) ','s');
++answ = 'y';
+ if answ == 'y'
+ mex_ok = true;
+ else
+@@ -240,7 +213,7 @@
+ mex_ok = false;
+ end
+
+-return
++endfunction
+
+ %---------------------------------------------------------------------------------
+ % compilation of cvm MEX file
+@@ -352,6 +325,8 @@
+
+ cd(stb)
+
++endfunction
++
+ %---------------------------------------------------------------------------------
+ % compilation of idm MEX file
+ %---------------------------------------------------------------------------------
+@@ -461,6 +436,7 @@
+
+ cd(stb)
+
++endfunction
+
+ %---------------------------------------------------------------------------------
+ % compilation of KINSOL MEX file
+@@ -569,6 +545,8 @@
+
+ cd(stb)
+
++endfunction
++
+ %---------------------------------------------------------------------------------
+ % Installation of common sundialsTB files
+ %---------------------------------------------------------------------------------
+@@ -633,6 +611,7 @@
+ break;
+ end
+ end
++endfunction
+
+ %---------------------------------------------------------------------------------
+ % Installation of CVODES files
+@@ -795,6 +774,8 @@
+ disp(msg);
+ end
+
++endfunction
++
+ %---------------------------------------------------------------------------------
+ % Installation of IDAS files
+ %---------------------------------------------------------------------------------
+@@ -949,7 +930,7 @@
+ disp(msg);
+ end
+
+-
++endfunction
+
+ %---------------------------------------------------------------------------------
+ % Installation of KINSOL files
+@@ -1023,3 +1004,6 @@
+ end
+
+
++endfunction
++
++install_STB;
diff --git a/debian/patches/series b/debian/patches/series
new file mode 100644
index 0000000..ae92893
--- /dev/null
+++ b/debian/patches/series
@@ -0,0 +1,7 @@
+cmake.patch
+makefile.patch
+#sh4.patch
+fix-format-error.patch
+octave-sundialstb.patch
+sundials-config.patch
+link-blas-lapack.patch
diff --git a/debian/patches/sh4.patch b/debian/patches/sh4.patch
new file mode 100644
index 0000000..d1ac1a5
--- /dev/null
+++ b/debian/patches/sh4.patch
@@ -0,0 +1,13 @@
+Index: sundials-2.4.0/configure
+===================================================================
+--- sundials-2.4.0.orig/configure 2010-11-03 08:42:51.000000000 +0100
++++ sundials-2.4.0/configure 2010-11-03 08:43:14.000000000 +0100
+@@ -8295,7 +8295,7 @@
+
+ ;;
+ # Ignore these flags.
+- -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -LANG:=* | -LIST:* | -LNO:*)
++ -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little | -LANG:=* | -LIST:* | -LNO:*)
+ ;;
+ -lkernel32)
+ test x"$CYGWIN" != xyes && ac_cv_f77_libs="$ac_cv_f77_libs $ac_arg"
diff --git a/debian/patches/sundials-config.patch b/debian/patches/sundials-config.patch
new file mode 100644
index 0000000..7bfcd91
--- /dev/null
+++ b/debian/patches/sundials-config.patch
@@ -0,0 +1,34 @@
+Index: sundials-2.5.0/bin/sundials-config.in
+===================================================================
+--- sundials-2.5.0.orig/bin/sundials-config.in 2012-04-12 02:31:04.000000000 +0200
++++ sundials-2.5.0/bin/sundials-config.in 2012-07-16 17:18:30.000000000 +0200
+@@ -1,4 +1,4 @@
+-#! @SHELL@
++#! /bin/bash
+ # -----------------------------------------------------------------------------------
+
+ NAME_="sundials-config"
+@@ -65,7 +65,7 @@
+ abs_includedir=`cd "${includedir}" > /dev/null 2>&1 && pwd`;
+ abs_libdir=`cd "${libdir}" > /dev/null 2>&1 && pwd`;
+
+-if test $abs_includedir != /usr/include ; then
++if test "$abs_includedir" != "/usr/include" ; then
+ includes=-I$abs_includedir
+ fi
+
+Index: sundials-2.5.0/CMakeLists.txt
+===================================================================
+--- sundials-2.5.0.orig/CMakeLists.txt 2012-07-16 16:21:00.000000000 +0200
++++ sundials-2.5.0/CMakeLists.txt 2012-07-16 17:12:04.000000000 +0200
+@@ -516,6 +516,10 @@
+ ${PROJECT_SOURCE_DIR}/include/sundials/sundials_config.in
+ ${PROJECT_BINARY_DIR}/include/sundials/sundials_config.h
+ )
++CONFIGURE_FILE(
++ ${PROJECT_SOURCE_DIR}/bin/sundials-config.in
++ ${PROJECT_SOURCE_DIR}/bin/sundials-config
++ )
+
+ # Add the include directory in the source tree and the one in
+ # the binary tree (for the header file sundials_config.h)
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..6dab794
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,114 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+#include /usr/share/hardening-includes/hardening.make
+#
+CPPFLAGS:=$(shell dpkg-buildflags --get CPPFLAGS)
+CFLAGS:=$(shell dpkg-buildflags --get CFLAGS) $(CPPFLAGS)
+CXXFLAGS:=$(shell dpkg-buildflags --get CXXFLAGS) $(CPPFLAGS)
+LDFLAGS:=$(shell dpkg-buildflags --get LDFLAGS)
+
+
+#workaround to start MPI-applications in chroot
+export OMPI_MCA_plm_rsh_agent=/bin/false
+
+extra_flags += \
+ -DCMAKE_Fortran_COMPILER=gfortran \
+ -DBUILD_SHARED_LIBS:BOOL=ON \
+ -DFCMIX_ENABLE:BOOL=ON \
+ -DMPI_ENABLE:BOOL=ON \
+ -DLAPACK_ENABLE:BOOL=ON \
+ -DEXAMPLES_ENABLE:BOOL=ON \
+ -DEXAMPLES_INSTALL:BOOL=OFF
+
+BUILDDIR = $(CURDIR)/debian/build
+
+# Get the appropriate paths for the installation of the Octave files
+mpath = $(shell octave-config -p LOCALFCNFILEDIR)
+bpath = $(shell octave-config -p LOCALOCTFILEDIR)
+
+
+%:
+ dh $@ --buildsystem=cmake --builddirectory=$(BUILDDIR) --parallel
+
+override_dh_auto_configure:
+ dh_auto_configure -- $(extra_flags)
+
+override_dh_auto_test:
+ dh_auto_test
+ echo "Running test..."
+ $(SHELL) debian/check.sh $(BUILDDIR) $(CURDIR)
+
+override_dh_auto_build:
+ dh_auto_build
+
+#
+#build/octave-sundials::
+ mkdir -p sundialsTB/octave
+ cd sundialsTB && octave -fV install_STB.m
+
+override_dh_auto_install:
+ dh_auto_install
+#
+#install/octave-sundials::
+ mkdir -p debian/tmp/$(bpath)/sundialsTB/cvodes/cvm/
+ mv sundialsTB/octave/sundialsTB/cvodes/cvm/cvm.mex debian/tmp/$(bpath)/sundialsTB/cvodes/cvm
+ mkdir -p debian/tmp/$(bpath)/sundialsTB/idas/idm/
+ mv sundialsTB/octave/sundialsTB/idas/idm/idm.mex debian/tmp/$(bpath)/sundialsTB/idas/idm
+ mkdir -p debian/tmp/$(bpath)/sundialsTB/kinsol/kim
+ mv sundialsTB/octave/sundialsTB/kinsol/kim/kim.mex debian/tmp/$(bpath)/sundialsTB/kinsol/kim
+
+ mkdir -p debian/tmp/$(mpath)
+ mv sundialsTB/octave/* debian/tmp/$(mpath)
+ rm debian/tmp/$(mpath)/sundialsTB/LICENSE
+
+ dh_install -a -Nlibsundials-doc
+ dh_install -plibsundials-doc -X.txt -X.out -X.in -XREADME
+
+#
+#to generate symbols
+# dpkg-gensymbols -plibsundials-parallel -O
+
+override_dh_strip:
+ find debian/tmp/$(bpath) -name \*.mex | xargs -r strip
+
+ dh_strip -plibsundials-cvode1 --dbg-package=libsundials-serial-dbg
+ dh_strip -plibsundials-cvodes2 --dbg-package=libsundials-serial-dbg
+ dh_strip -plibsundials-ida2 --dbg-package=libsundials-serial-dbg
+ dh_strip -plibsundials-idas0 --dbg-package=libsundials-serial-dbg
+ dh_strip -plibsundials-kinsol1 --dbg-package=libsundials-serial-dbg
+ dh_strip -plibsundials-nvecserial0 --dbg-package=libsundials-serial-dbg
+
+ dh_strip -plibsundials-nvecparallel0 --dbg-package=libsundials-nvecparallel-dbg
+ dh_strip -a
+
+ ls -l debian/tmp/usr/lib
+
+override_dh_auto_clean:
+ find examples \
+ -type f -a \( -name \*.o \) \
+ -a -exec rm -f \{\} \;
+ find sundialsTB \
+ -type f -a \( -name \*.o -o -name \*.mex \) \
+ -a -exec rm -f \{\} \;
+ rm -rf sundialsTB/octave
+ rm -rf bin/makefile-update.sh
+ dh_auto_clean
+
+# Grab the version before +dfsg
+DEB_UPSTREAM_VERSION=$(shell dpkg-parsechangelog | sed -rne 's,^Version: ([^+]+).*,\1,p')
+DEB_STRIPPED_UPSTREAM_VERSION = $(shell echo $(DEB_UPSTREAM_VERSION) | sed 's/-[^-]*$$//')
+
+USCAN_DESTDIR := $(CURDIR)/../tarballs
+
+
+get-orig-source:
+ mkdir -p $(USCAN_DESTDIR)
+ uscan --force-download --no-symlink --verbose --destdir $(USCAN_DESTDIR)
+ tar -C $(USCAN_DESTDIR) -xzf $(USCAN_DESTDIR)/sundials_$(DEB_STRIPPED_UPSTREAM_VERSION).orig.tar.gz
+ rm -f $(USCAN_DESTDIR)/sundials*.tar.gz
+ find $(USCAN_DESTDIR)/sundials-$(DEB_STRIPPED_UPSTREAM_VERSION) -name \*.pdf | xargs rm
+ cd $(USCAN_DESTDIR) && GZIP=-9 tar -czf \
+ $(CURDIR)/sundials_$(DEB_UPSTREAM_VERSION).orig.tar.gz \
+ sundials-$(DEB_STRIPPED_UPSTREAM_VERSION)
+ rm -rf $(USCAN_DESTDIR)/sundials-$(DEB_STRIPPED_UPSTREAM_VERSION)
diff --git a/debian/source.lintian-overrides b/debian/source.lintian-overrides
new file mode 100644
index 0000000..5d43fb6
--- /dev/null
+++ b/debian/source.lintian-overrides
@@ -0,0 +1,5 @@
+sundials source: ancient-libtool config/ltmain.sh 1.4.3
+# We are using cmake
+sundials source: outdated-autotools-helper-file config/config.sub 2005-12-11
+sundials source: outdated-autotools-helper-file config/config.guess 2005-12-13
+
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..163aaf8
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (quilt)
diff --git a/debian/sundials-config.1 b/debian/sundials-config.1
new file mode 100644
index 0000000..93913f0
--- /dev/null
+++ b/debian/sundials-config.1
@@ -0,0 +1,57 @@
+.TH "sundials\-config" 1 "2006-07-25" "" "SUNDIALS"
+.SH NAME
+sundials-config \- returns required flags for linking to SUNDIALS libraries
+.SH SYNOPSIS
+.HP
+.B sundials\-config
+.BI "\-m {" cvode | cvodes | ida | kinsol }
+.BI "\-t {" s | p }
+.BI "\-l {" c | f }
+.BI "[-s {" libs | cppflags }]
+.B [\-hv]
+.SH DESCRIPTION
+.B sundials\-config
+provides a way to obtain various configuration options for compiling programs
+that use SUNDIALS
+.SH OPTIONS
+.TP
+.BI "\-m {" cvode | cvodes | ida | kinsol }
+Select the SUNDIALS module
+.TP
+.BI "\-t {" s | p }
+Use serial of parallel vectors
+.TP
+.BI "\-l {" c | f }
+Use C or Fortran
+.TP
+.BI "-s {" libs | cppflags }
+Show linking flags or C preprocessor flags
+(show both of no option is given)
+.TP
+.B \-h
+Get usage and options information
+.TP
+.B \-v
+View the script
+.SH NOTES
+.TP
+.B \-lf
+is not valid for
+.B \-m cvodes
+.TP
+.B \-s cppflags
+returns an empty string for
+.B \-l f
+.SH AUTHOR
+\fBRadu Serban\fR <\&radu at llnl.gov\&>
+.P
+This manual page was written by Andrey Romanenko for
+the Debian system (but may be used by others). Permission
+is granted to copy, distribute and/or modify this document under
+the terms of the &gnu; General Public License, Version 2 any
+later version published by the Free Software Foundation.
+.P
+On Debian systems, the complete text of the GNU General Public
+License can be found in \fI/usr/share/common-licenses/GPL\fR.
+.SH "SEE ALSO"
+SUNDIALS Documentation
diff --git a/debian/watch b/debian/watch
new file mode 100644
index 0000000..ad74a64
--- /dev/null
+++ b/debian/watch
@@ -0,0 +1,4 @@
+version=3
+opts="filenamemangle=s/.*//,dversionmangle=s/\.dfsg$//" \
+ http://computation.llnl.gov/casc/sundials/download/download.html \
+ .*'sundials-([\d.]+)'.* debian /bin/sh debian/orig-tarball.sh
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/debian-science/packages/sundials.git
More information about the debian-science-commits
mailing list