[openfoam] 06/06: Update templates for manpages.

[Anton Gladky]

This is an automated email from the git hooks/post-receive script.

gladk pushed a commit to branch master
in repository openfoam.

commit a1f437ad2503c1bbd04bc3b6e2ba6516d180b343
Author: Anton Gladky <gladk at debian.org>
Date:   Sat Sep 24 07:17:41 2016 +0200

    Update templates for manpages.
---
 debian/manpage/listBinFiles | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/debian/manpage/listBinFiles b/debian/manpage/listBinFiles
index 2bc4751..394d97a 100644
--- a/debian/manpage/listBinFiles
+++ b/debian/manpage/listBinFiles
@@ -8,7 +8,7 @@ autoRefineMesh Utility to refine cells near to a surface.
 blockMesh blockMesh is one of the most basic mesh generators in OpenFOAM. It relies on a single dictionary file blockMeshDict, usually placed inside the folder constant/polyMesh. 
 boundaryFoam Steady-state solver for 1D turbulent flow, typically to generate boundary layer conditions at an inlet, for use in a simulation.
 boxTurb Makes a box of turbulence which conforms to a given energy spectrum and is divergence free. 
-buoyantBoussinesqPimpleFoam
+buoyantBoussinesqPimpleFoam Transient solver for buoyant, turbulent flow of incompressible fluids
 buoyantBoussinesqSimpleFoam Steady-state solver for buoyant, turbulent flow of incompressible fluids
 buoyantPimpleFoam This solver is a steady-state solver for buoyant, turbulent flow
 buoyantSimpleFoam Steady-state solver for buoyant, turbulent flow of compressible fluids, including radiation, for ventilation and heat-transfer. 
@@ -32,13 +32,13 @@ createBaffles Makes internal faces into boundary faces. Does not duplicate point
 createExternalCoupledPatchGeometry Application to generate the patch geometry (points and faces) for use with the externalCoupled boundary condition. 
 createPatch Utility to create patches out of selected boundary faces. Faces come either from existing patches or from a faceSet. 
 datToFoam Reads in a datToFoam mesh file and outputs a points file.  Used in conjunction with blockMesh.
-decomposePar
+decomposePar Decomposes a case to be run in parallel
 deformedGeom Deforms a polyMesh using a displacement field U and a scaling factor supplied as an argument.
-dnsFoam
-DPMFoam
-driftFluxFoam
+dnsFoam solver especially designed for the purpose of simulating isotropic turbulence
+DPMFoam solver which includes the effect of the particulate volume fraction on the continuous phase, suitable for dense particle flow simulation. The solver uses existing functionality for particle clouds and their collisions, which directly resolves particle-particle interactions.
+driftFluxFoam solver for 2 incompressible fluids using the mixture approach with the drift-flux approximation for relative motion of the phases.
 dsmcFoam Initialise a case for dsmcFoam by reading the initialisation dictionary system/dsmcInitialise
-dsmcInitialise
+dsmcInitialise initialises a case for dsmcFoam by reading the initialisation dictionary system/dsmcInitialise
 electrostaticFoam solver for electrostatics.
 engineCompRatio Calculate the geometric compression ratio.
 engineFoam Solver for internal combustion engines. 
@@ -55,10 +55,10 @@ flattenMesh Flattens the front and back planes of a 2D cartesian mesh.
 fluent3DMeshToFoam Converts a Fluent mesh to OpenFOAM format.
 fluentMeshToFoam Converts a Fluent mesh to OpenFOAM format including multiple region and region boundary handling.
 foamDataToFluent Translates OpenFOAM data to Fluent format.
-foamDictionary
+foamDictionary Interrogates and manipulates dictionaries.
 foamFormatConvert Converts all IOobjects associated with a case into the format specified in the controlDict.
 foamHelp Top level wrapper utility around foam help utilities
-foamList
+foamList Print the table of contents of selectable switches, classes etc. in the OpenFOAM libraries.
 foamListTimes List times using timeSelector.
 foamMeshToFluent Writes out the OpenFOAM mesh in Fluent mesh format.
 foamToEnsight Translates OpenFOAM data to EnSight format. 
@@ -116,7 +116,7 @@ pimpleDyMFoam Transient solver for incompressible, flow of Newtonian fluids on a
 pimpleFoam Large time-step transient solver for incompressible, flow using the PIMPLE (merged PISO-SIMPLE) algorithm. 
 pisoFoam Transient solver for incompressible flow. 
 plot3dToFoam Plot3d mesh (ascii/formatted format) converter. 
-polyDualMesh
+polyDualMesh Calculate the dual of a polyMesh. Adheres to all the feature and patch edges.
 porousSimpleFoam Steady-state solver for incompressible, turbulent flow with implicit or explicit porosity treatment and support for multiple reference frames (MRF) 
 postChannel Post-processes data from channel flow calculations. 
 postProcess
@@ -181,7 +181,7 @@ surfaceAdd Add two surfaces. Does geometric merge on points. Does not check for
 surfaceAutoPatch Patches surface according to feature angle. Like autoPatch. 
 surfaceBooleanFeatures Generates the extendedFeatureEdgeMesh for the interface between a boolean operation on two surfaces. Assumes that the orientation of the surfaces is correct: 
 surfaceCheck Checks geometric and topological quality of a surface. 
-surfaceClean - removes baffles
+surfaceClean removes baffles
 surfaceCoarsen Surface coarsening using 'bunnylod': 
 surfaceConvert Converts from one surface mesh format to another. 
 surfaceFeatureConvert Convert between edgeMesh formats. 

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/debian-science/packages/openfoam.git