[osmo-trx] annotated tag debian/0_20170323git2af1440+dfsg-2 created (now 053e54d)
Thorsten Alteholz
alteholz at moszumanska.debian.org
Thu Sep 14 18:00:55 UTC 2017
This is an automated email from the git hooks/post-receive script.
alteholz pushed a change to annotated tag debian/0_20170323git2af1440+dfsg-2
in repository osmo-trx.
at 053e54d (tag)
tagging f3174be954a768adc33456c676fa77fa017efd57 (commit)
tagged by Thorsten Alteholz
on Thu Sep 14 20:00:37 2017 +0200
- Log -----------------------------------------------------------------
Debian release 0~20170323git2af1440+dfsg-2
Alexander Chemeris (70):
Checking in build system for the Transceiver.
Fix build of the Transceiver.
uhd: Use full DAC scale with UmTRX to improve signal quality.
UmTRX: Manually set Tx gain stages for the best signal quality.
uhd: Set RF frontend bandwidth for UmTRX to improve signal quality.
umtrx: Don't use DSP tuning, because LMS6002D PLL steps are small enough.
Transceiver: Make error response to an unknown command on UDP command interface more understandable.
Transceiver: Check TSC values to be in [0..7] range.
Common: Introduce a global variable to disable syslog logging.
Common: Log to console instead of loging to syslog by default.
osmo-trx: Fix random filler command line option.
transceiver: Fix out-of-bounds acces in genRandNormalBurst().
transceiver: Drive clock indication form the receive thread.
sigProcLib: Fix burst start phase.
Common: Use a scoped lock in the Logger to avoid deadlock on thread cancel.
osmo-trx: Add a command line option for the dBFS to dBm offset.
Transceiver: Print noise level for each burst in debug mode.
Transceiver: Fix clipping detection.
sigProcLib: Check for bogus TOA before using it.
osmo-trx: Add an option to swap channels on UmTRX.
transceiver: Remove noise/RSSI gating.
Transceiver: Update noise level only when the timeslot is marked as IDLE.
Checking in a more relevant README.
Checking in clockdump.sh utility.
sigProcLib: Abstract out common part of Normal/RACH burst detection.
uhd: Fix rounding error in timestamp conversion functions.
Transceiver: Do not update state->SNRestimate if equalization is disabled.
transceiver: Add a debug option to dump selected timeslots to disk.
uhd: Fix UmTRX tuning broken in commit 90f7a01d.
Transceiver: Fix whitespace.
Transceiver: Add support for OsmoBTS style handover.
Logger: Output ERR log messages to stderr as well.
uhd: Output Rx/Tx gain limits to log to make it more transparent.
EDGE: Add support for UmTRX.
Common: Get rid of a compilation warning.
Common: Make sure gLogEarly() log to the same facilities as the normal log.
transceiver: Properly handle MAXDLY.
transceiver: Add an option to generate random Access Bursts.
osmo-trx: Output Rx SPS as a part of configuration output.
transceiver: Do not pass transceiver state struct to function where it's not used.
makefile: Fix build from an external path.
radioDevice: GSMRATE macro must have parentheses around its definition.
uhd: Fix comment.
radioInterface: Initialize power scale with a meaningful default.
transceiver: Log channel number in DEBUG output of demoded bursts.
transceiver: Add an option to emulate a RACH delay in random filler mode.
UHD: Initial LimeSDR support.
CommonLibs: Remove unused files.
sigProcLib: Typo sybols -> symbols
radioBuffer: Remove extra ; at the end of inline function definitions.
sigProcLib: Fix documentation, sync argument names in .cpp and .h files.
sigProcLib: make energyDetect() simpler by returning actual energy.
sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity.
sigProcLib: Slice SoftVector instead of signalVector for GMSK demod.
Call vectorSlicer() right before packing bits for transmission to osmo-bts.
CommonLibs: Print soft bits with less confidence to console when printing a soft vector.
BitVector: Remove convolutional codec - we don't use it in osmo-trx.
BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits.
signalVector: Implement segment().
vector: Introduce segmentMove() method to move data inside of a vector.
vector: Introduce shrink() function to shrink vector size without loosing data.
Move CorrType type from Transceiver to sigProcLib.
sigProcLib: rename signalError type to SignalError.
Move Transceiver::detectBurst() to sigProcLib to make it reusable.
Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable.
sigProcLib: Add operator<< to print CorrType to a string.
sigProcLib.h: Fix whitespaces. No non-whitespace changes.
Move Transceiver::demodulate() to sigProcLib to make it reusable.
sigProcLib: constify signalVector arguments for detectBurst() functions.
sigProcLib: Constify demodulation functions burst argument.
Holger Hans Peter Freyther (2):
debian: Add packaging to master taken from fairwaves/master
debian: Require fftw3 header files for osmo-trx
Ivan Kluchnikov (1):
Transceiver52M: Change POWERON behavior to return success if the transceiver is already running, and only return fail on device
Max (5):
Add gerrit settings
Integrate Debian packaging changes
Remove embedded sqlite3
Fix building against sqlite3
Add autoconf-archive to dependencies
Neels Hofmeyr (4):
add basic .gitignore
configure.ac: check for boost/config.hpp header
The INSTALL file is being overwritten by autoreconf, but it is committed
add contrib/jenkins.sh, for gerrit build bot
Ruben Undheim (44):
Added debian folder
Added build dependencies.
sqlite3 not embedded
Get rid of some lintians
Enable pristine-tar in d/gbp.conf
Added explanation of BTS and 3GPP
Changed to Debian Science Maintainers
master branch is debian branch
Updated d/copyright
Made source dfsg compatible
Prepared packaging for +dfsg source
Merge tag 'upstream/0_20150119git722d4f7+dfsg'
Renamed from osmotrx to osmo-trx
Changed source address in d/copyright
Added options to man page
Tweaked d/rules so that rebuild works fine
Merge branch 'upstream' into dfsg
Merge tag 'upstream/0_20150325gitf147b17+dfsg'
New version number in changelog entry
Add LEGAL to docs
Added watch file
Added files to Files-Excluded
Added --parallel to dh command
Added simple autopkgtest
Added copyright info for more files
Added copyright info for more files
Added autotest during build as well
Align d/copyright better
Removed sqlite3/ as well from +dfsg
Removed sqlite as well
Merge tag 'upstream/0_20150325gitf147b17+dfsg'
Merge branch 'dfsg' of ssh://alioth.debian.org/git/debian-science/packages/osmo-trx into dfsg
Restored sqlite3/Makefile.am
Add patch for removing -march=native
--without-sse
Still build with SSE if supported
Fixed formatting in man page
New changelog entry
Do not embed sqlite3 when building
Merge branch 'upstream' into dfsg
Merge tag 'upstream/0_20170323git2af1440+dfsg'
Changes to debian dir for new package
Add ~exp1 suffix to version
Upload to unstable
Thomas Tsou (97):
Transceiver52M: Update to UHD streamer interface
Transceiver52M: Add UHD device type checking
Transceiver52M: Add device offset correction table
Transceiver52M: Remove periodic alignment update from UHD build
Transceiver52M: Remove and rename oversampling variables
Transceiver52M: Set resampling option automatically based on device
Transceiver52M: Use exception blocks for rate changes
Transceiver52M: Remove unused test code from main
Transceiver52M: Verify global config sanity before using
Transceiver52M: Rename samples-per-symbol variable names
Transceiver52M: Make GSM pulse filter internal to implementation
Transceiver52M: Add destructors to correlation seqeunce objects
Transceiver52M: Remove logging from signal processing core
Transceiver52M: Generate RACH correlation sequence at initialization
Transceiver52M: Replace convolve and related calls with SSE implementation
Transceiver52M: Replace resampler with SSE enabled implementation
Transceiver52M: Add SSE floating point / integer conversion
Transceiver52M: Disable energy detector
Transceiver52M: Add 4 samples-per-symbol Laurent pulse shape
Transceiver52M: Add UmTRX support
Transceiver52M: Refactor RACH and normal burst detection
Transceiver52M: Check that sample rates are sane before using
Transceiver52M: Setup dual Laurent pulse shaping filter
Transceiver52M: Add B200 support
Transceiver52M: Narrow resampling filter bandwidth
Transceiver52M: Reduce RACH and TSC correlation windows
Transceiver52M: Disable equalization
Transceiver52M: Separate main transmit and receive drive threads
Transceiver52M: Generate delay filter with SSE memory alignment
Transceiver52M: Setup dual sample rate transceiver
Transceiver52M: Add B210 support
Transceiver52M: Remove support for ancient libusrp versions
Transceiver52M: Add 64 MHz resampling option with B100
Transceiver52M: Reduce and place bounds checking on I/O buffers
Transceiver52M: Deallocate high level resources on shutdown
Transceiver52M: Delay UHD messaging registration until after start
Transceiver52M: Move reference select from compile time to database
Transceiver52M: Update noise measurement calculation
Transceiver52M: Update RSSI calculation
Transceiver52M: Separate architecture specific files
build: Set UHD driver as default configuration
Transceiver52M: Fix SSE preprocessor definition
Transceiver52M: Reset overrun and underrun indicators
build: Remove subversion references
Transceiver52M: Remove transmit logging option
Transceiver52M: Delay socket allocation to heap
Transceiver52M: Separate transceiver per-slot state information
Transceiver52M: Remove unused files and utilities
Transceiver52M: Remove unnecessary UHD clock setting call
Transceiver52M: Add multi channel transceiver support
Transceiver52M: Add ARM NEON support
Transceiver52M: Set variable thread priority levels
Transceiver52M: Use USRP1 type window for B2xx devices
Transceiver52M: Add NEON complex-complex multiply
Transceiver52M: Dynamically allocate convolution input vectors
Transceiver52M: Remove extra copy in receive drive path
Transceiver52M: Separate signalVector into it's own file
Transceiver52M: Precompute fractional delay filters
Transceiver52M: Default to 1 sample-per-symbol low powered devices
Transceiver52M: Set priority on downlink socket thread
Transceiver52M: UHD: Continue on receive and send timeouts
Transceiver52M: Preallocate head room for burst correlation
Transceiver52M: Setup sinc() call directly with table lookup
Transceiver52M: Allow separate in/out vectors for delay and decimation
Transceiver52M: Dynamically allocate correlation vectors
Transceiver52M: Rearrange socket port assignemnts
Transceiver52M: Add vectorized radio burst capability
Transceiver52M: UHD: Add string descriptors to device-offset pairs
Transceiver52M: sigproc: Wrap internal phase on frequency shift
Transceiver52M: Refactor receive path outer burst handling
Transceiver52M: Add dual channel diversity receiver option
Transceiver52M: Check time slot validity of incoming bursts
Transceiver52M: Ignore detected bursts at the noise floor
Transceiver52M: Use independent noise vectors for each channel
Transceiver52M: Set const qualifier on appropriate radio vector methods
Transceiver52M: Use independent power scaling varables for each channel
Transceiver52M: Allow only channel zero to set TSC value
Transceiver52M: Remove unused code
Transceiver52M: Add virtual destructor for radio device
Transceiver52M: Enable all warnings and resolve
Transceiver52M: Output device and operating mode to stdout
Transceiver52M: Create new osmo-trx executable
Transceiver52M: UHD: Check running status before stopping stream
Transceiver52M: Ignore channel estimation if we are not equalizing
Transceiver52M: Remove database configuration file requirement
Transceiver52M: Add missing scaling vector resize
Transceiver52M: Disable filler table retransmissions by default
Transceiver52M: Set B2XX clock frequency to 26 MHz
Transceiver52M: Split B200 and B210 identifiers
Transceiver52M: Disable initial device time reset
Transceiver52M: Enable B210 dual channel support
Transceivert52M: Add option for baseband frequency offset
Transceiver52M: Set UHD rates before creating streamers
Transceiver52M: Allow startup delay for stream alignment
Transceiver52M: Add E1XX USRP device id and timings
Transceiver52M: Fix retransmissions when filler table is enabled
Transceiver52M: Fix SSE convolution shuffle register
Thorsten Alteholz (1):
Import Debian changes 0~20170323git2af1440+dfsg-2
Tom Tsou (66):
uhd: Display current timestamp with buffer status errors
CommonLibs: Add thread cancellation capability
Transceiver52M: Allow setting gain before POWERON
Transceiver52M: Implement POWEROFF command
Transceiver52M: Add X300/X310 and E310 USRP support
b210: Lock dual-channel tuning access
usrp1: Update device API for frequency offset tuning
radioInterface: Reset sample buffer cursors on each start
build: Add 'subdir-objects' to AM_INIT_AUTOMAKE
sigproc: Add clipping detection on RACH and TSC input
build: Provide option for disabling SSE autodetection
uhd: Pass UHD command line arguments to constructor
test: Add command line random normal burst option
uhd: Add version 3.9.0 support
uhd: Use internal UHD tick conversions
sigproc: Make convolution and convert input buffers immutable
uhd: Remove references to USRP B205
Transceiver52M: Fix ARM build issues
sigproc: Remove dynamic SPS configuration
sigproc: Remove normal burst DFE equalizer
EDGE: Setup variable sampling on receive path
EDGE: Add 8-PSK modulator and demodulator
EDGE: Add interfaces to enable EDGE transceiver
sigproc: Always use 625 sample length bursts with 4 SPS
sigproc: Add various GSM burst generators
EDGE: Add random burst generator filler option
EDGE: Combine shared GMSK and 8-PSK demodulator sections
EDGE: Fix USRP B210 device support
uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts
EDGE: Fix demodulation slicer input
common: Restrict UDP binding to localhost only
common: Add mandatory length field to UDP receive calls
uhd: Update default E3XX settings
uhd: Set default Tx sampling to 4 sps
uhd: Make device offset check a private method
uhd: Set minimum UHD version requirement for E3XX
sigproc: Expand RACH, TSC, and EDGE correlation windows
transceiver: Do not report error on SETTSC when radio is on
transceiver: Add Rx samples-per-symbol option
radioInterface: Convert diversity argument to general type
iface: Add inner ring-buffer implementation
mcbts: Add multi-ARFCN channelizing filters
mcbts: Add multi-ARFCN radio support
sigproc: Adjust burst detection threshold criteria
egprs: Enable 8-PSK length vectors on the Tx interface
egprs: Enable 8-PSK burst detection when EDGE is enabled
transceiver: Remove HANDOVER warnings
mcbts: Allow out of order channel setup
radioInterface: Fix multi-channel buffer index bug
uhd: Add command line option for GPS reference
transceiver: Fix mixed GSMK / 8-PSK transmission
transceiver: Fix 4 SPS receive TOA value
sigproc: Fix missing 8-PSK tail symbols
uhd: Update USRP2/N200/N210 for 4 SPS Rx
sigproc: Match differential GMSK start/end bits to tail bits
uhd: Add missing B200 sample timing for 4 SPS receive
transceiver: Fix command build warning
uhd: Set minimum supported version to 3.9.0
uhd: Add X300 sample timing for 4 SPS
Revert "uhd: Set minimum supported version to 3.9.0"
uhd: Add support for UHD-3.11 logging control
uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz
Resampler: Fix initialization return checking
sigProcLib: Remove unreachable code and no-effect checks
sigProcLib: Check return status on downsampling
sigProcLib: Fix negative value check on unsigned value
dburgess (7):
This is where the public release of openbts will actually live.
Putting the actual OpenBTS P2.8 source code into the public SVN branch.
Fixed the license notices.
Adding in the missing Transceiver52M directory
Changes to auto-foo files that should probably be removed anyway.
Removed a Makefile that should not have benn checked in.
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2583 19bc5d8c-e614-43d4-8b26-e1612bc8e597
hsamra (1):
Updates to working with a single RFX...builds but not working yet.
kurtis.heimerl (88):
Reverting r2342
transceiver: fix initialization segfault in radio interface
Transceiver52M: add WBX, DBSRX, and single board support
uhd: remove extra type conversion
uhd: add 52 MHz transceiver support
uhd: flush initial receive samples
uhd: only the E100 supports FPGA timestamps and adjustable clock rate
uhd: log useful information on monotonic errors
uhd: set hardware side delay offset for e100
uhd: set receive gain during initialization
uhd: set and shadow settings through interface
uhd: move non-52MHz transceiver to common radio device interface
uhd: allow the non-uhd to still compile unchanged
uhd: move static functions into the uhd_device class
uhd: inline thread priority setting
uhd: reset sample clock when time goes non-monotonic
uhd: fix timestamp conversion bug on 32-bit architectures
uhd: rework handling of timestamp errors
uhd: disable adaptive buffering in 52 MHz transceiver
uhd: set attenuation relative to max RF gain
transceiver: rework digital gain settings
uhd: cleanup startup timestamp alignment
uhd: enable automatic alignment updates
uhd: reorganize error handling, exit when non-recoverable
transceiver: simplify transmit power control
transceiver: fix energy threshold bug
uhd: log asynchronous errors as errors
usrp1: fix typo in rx gain setting log message
usrp1: fix transmit side tuning bug
uhd: flush receive buffer should return true on timeout
transceiver: reinsert digital gain scaling
uhd: remove uhd type argument
transceiver: fix bug in setting low-level attenuation
uhd: verify setting of master clock rate
uhd: remove external clock polarity setting
transceiver: remove extra typedefs to remove warnings
transceiver: remove extraneous comments
transceiver: minor cleanup of sample type sizing in uhd
transceiver: uhd: update copyright header
transceiver: separate radio clock and vector interfaces
transceiver: separate I/O portion of radio interface implementation
uhd: keep reading on overrun or other non-fatal errors
transceiver: add option for host based resampling
transceiver: rename getting radio vector time to getTime()
transceiver: move various radio interface definitions
transceiver: clean variable init of radio interface constructor
transceiver: reroute uhd messages to logging facility
transceiver: make the transmit drive loop bus dependent
transceiver: reject usrp1 if detected using uhd
transceiver: add a newline for uhd information outputs
build: insert autofoo for usrp transceiver and options
transceiver: update to log messages to work with P2.8
transceiver: update main to non-device specific interface
uhd: increase initial transmit transport latency
transceiver: uhd: make external reference a compile time option
transceiver: usrp1: select single dboard use at compile time
transceiver: uhd: increase log level on constructor errors
transceiver, resamp: insert missing filter values
transceiver: enable USRP1 firmware binary install
transceiver, resamp: enlarge transmit resampler output buffer
changing config scripts to explitly target UHD/USRP1
transceiver, uhd: runtime check for setting master clock rate
transceiver, uhd: reject usrp1 if compiled with uhd support
transceiver, uhd: exit informatively if no devices are found
transceiver52M: bump critial errors to ALERT level
Matching UHD changes in gnuradio
Fixing Thomas's MTC receive bug. We don't have a ticket for it, but there seemed to be a timing inversion deadlock in Interthread.h. We mostly duck it, instead of solving it.
Alexander's change. Fixes MTC bug by supporting 64bit processors in Timeval. Math was bad.
Reverted bad function header. There are no timing inversion deadlocks, I made those up.
Locking gethostbyname call, as Alexander notes that it is not thread safe
Harvind found a bug in BitVector.cpp:
Public release now works with g++4.7. In 4.7, unistd.h is no longer imported by default
merged private Config to public: r4211:
Alexander's patch #3: Configuration Tests should not include crashing
Alexander's patch #1:
Oh kay. Lots of patches trying to catch up to mainline:
r4408 in private:
r4425 in private:
Alexander's patches:
missed something in one of the socket patches. now works as expected
Patch 4545 in private:
Sylvain patch #2, with modifications:
OH GOOD GIT MISSED THESE FILES THANKS GIT
From 32bbfc3c89b1c56672bf2fd3660a45c513ac54d4 Mon Sep 17 00:00:00 2001
From b453f10d65dd1ff1df0dd3747adf63f4e1fd7d30 Mon Sep 17 00:00:00 2001
Correction of trivial warnings.
Synced sqlite3utils with private and fixed a small recursive bug in SIPEngine that was already fixed in private
syncing commonlibs with Many thanks to Michael Iedema for these patches, makes config a lot better.
pierre.baudry (1):
transceiver: Fix mismatched allocations and deallocations
ttsou (16):
transceiver, uhd: alert user on unrecoverable errors
transceiver, uhd: display device information on make failure
transceiver, uhd: fix build error due to log level
transceiver, uhd: output timestamps on monontonic error
transceiver, usrp1: fix transmit gain setting bug
transceiver: b100: raise minimum transmit latency value
transceiver: uhd: allow underrun flag to reset during timing alignment
transceiver: uhd: prevent output of underrun message at ERROR level
Transceiver52M: UHD: Setup option to pass arguments from command line
transceiver52m: reset energy threshold on receive gain changes
Transceiver52M: Properly pass samplerate to RadioDevice::make()
Transceiver52M: Read IP address and port to bind to from a configuration instead of hardcoding them.
Transceiver52: allow for handling of TCH/H slots
Transceiver52M: Fix calculation of TS correlation for 2 sps and higher
Transceiver52M: Add GPRS combinations to correlation types
Transceiver52M: Add more complete specification of GPRS types
-----------------------------------------------------------------------
No new revisions were added by this update.
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/debian-science/packages/osmo-trx.git
More information about the debian-science-commits
mailing list