[xml/sgml-commit] r2143 - in /packages/refdb/trunk/debian/patches: fixbatikrast.patch fixversion.patch removegetopt.patch
malat at users.alioth.debian.org
malat at users.alioth.debian.org
Thu Jan 10 11:22:33 UTC 2013
Author: malat
Date: Thu Jan 10 11:22:31 2013
New Revision: 2143
URL: http://svn.debian.org/wsvn/debian-xml-sgml/?sc=1&rev=2143
Log:
Refresh patches
Modified:
packages/refdb/trunk/debian/patches/fixbatikrast.patch
packages/refdb/trunk/debian/patches/fixversion.patch
packages/refdb/trunk/debian/patches/removegetopt.patch
Modified: packages/refdb/trunk/debian/patches/fixbatikrast.patch
URL: http://svn.debian.org/wsvn/debian-xml-sgml/packages/refdb/trunk/debian/patches/fixbatikrast.patch?rev=2143&op=diff
==============================================================================
--- packages/refdb/trunk/debian/patches/fixbatikrast.patch (original)
+++ packages/refdb/trunk/debian/patches/fixbatikrast.patch Thu Jan 10 11:22:31 2013
@@ -4,8 +4,8 @@
Index: refdb-0.9.9/configure.in
===================================================================
---- refdb-0.9.9.orig/configure.in 2012-12-28 16:57:09.259050139 +0100
-+++ refdb-0.9.9/configure.in 2012-12-28 16:57:10.959050177 +0100
+--- refdb-0.9.9.orig/configure.in 2013-01-10 11:19:29.860207451 +0000
++++ refdb-0.9.9/configure.in 2013-01-10 11:19:29.856207451 +0000
@@ -209,7 +209,7 @@
AC_PATH_PROG(mydtdformat, dtdformat)
AC_PATH_PROG(mysgrep, sgrep)
@@ -17,8 +17,8 @@
dnl see whether subversion is installed
Index: refdb-0.9.9/doc/Makefile.am
===================================================================
---- refdb-0.9.9.orig/doc/Makefile.am 2012-12-28 16:57:17.847050329 +0100
-+++ refdb-0.9.9/doc/Makefile.am 2012-12-28 16:57:24.147050467 +0100
+--- refdb-0.9.9.orig/doc/Makefile.am 2013-01-10 11:19:29.860207451 +0000
++++ refdb-0.9.9/doc/Makefile.am 2013-01-10 11:19:29.856207451 +0000
@@ -76,7 +76,7 @@
if HAVEBATIK
@@ -30,9 +30,9 @@
convert $< $@
Index: refdb-0.9.9/doc/Makefile.in
===================================================================
---- refdb-0.9.9.orig/doc/Makefile.in 2012-12-28 16:58:02.559051314 +0100
-+++ refdb-0.9.9/doc/Makefile.in 2012-12-28 16:58:14.579051576 +0100
-@@ -791,7 +791,7 @@
+--- refdb-0.9.9.orig/doc/Makefile.in 2013-01-10 11:19:29.860207451 +0000
++++ refdb-0.9.9/doc/Makefile.in 2013-01-10 11:19:29.856207451 +0000
+@@ -798,7 +798,7 @@
$(top_srcdir)/scripts/statgen.pl docbook > refdb-manual-statustable.xml
@HAVEBATIK_TRUE@$(png_images): %.png: %.svg
@@ -43,8 +43,8 @@
Index: refdb-0.9.9/doc/chapter-installation.xml
===================================================================
---- refdb-0.9.9.orig/doc/chapter-installation.xml 2012-12-28 16:57:35.463050717 +0100
-+++ refdb-0.9.9/doc/chapter-installation.xml 2012-12-28 16:57:42.079050863 +0100
+--- refdb-0.9.9.orig/doc/chapter-installation.xml 2013-01-10 11:19:29.860207451 +0000
++++ refdb-0.9.9/doc/chapter-installation.xml 2013-01-10 11:19:29.856207451 +0000
@@ -545,7 +545,7 @@
<para>The SVN version also lacks a few other things which are included in the source tarballs. In order to create the missing stuff, you'll need the following additional tools:</para>
<itemizedlist>
@@ -54,16 +54,3 @@
</listitem>
<listitem>
<para><ulink url="http://dtdparse.sourceforge.net">dtdparse</ulink>: a Perl script (which in turn depends on a few Perl modules, see the installation instuctions) which generates the DTD documentation.</para>
-Index: refdb-0.9.9/doc/refdb-manual/ch04s04.html
-===================================================================
---- refdb-0.9.9.orig/doc/refdb-manual/ch04s04.html 2012-12-28 16:57:49.315051022 +0100
-+++ refdb-0.9.9/doc/refdb-manual/ch04s04.html 2012-12-28 16:57:54.851051144 +0100
-@@ -18,7 +18,7 @@
- </pre><p>Consider subscribing to the refdb-cvs mailing list as you'll be notified about each SVN checkin.</p></li><li><p>The SVN version lacks all autotool-generated files. You'll have to create them with your local autotools. RefDB contains a small script called <code class="filename">autogen.sh</code> in its top-level directory which performs all necessary steps.</p><pre class="screen">
- <code class="prompt">$~/build/refdb </code>
- <strong class="userinput"><code>./autogen.sh</code></strong>
-- </pre><div class="note" style="margin-left: 0.5in; margin-right: 0.5in;"><h3 class="title">Note</h3><p>The autotools can cause severe headaches at times. If the above command causes errors, read <code class="filename">autogen.sh</code> and run the commands manually, substituting different versions as appropriate. E.g. substitute <span><strong class="command">automake</strong></span> with <span><strong class="command">automake-1.8</strong></span> if this gives better results. The native autotools shipped with FreeBSD 5.4 and later are unusable for our purposes, you have to install the gnu-autotools package instead. You have to modify your <code class="envar">PATH</code> to pick up the latter, and fiddle with the m4 macro paths in order to see the light.</p></div></li><li><p>The SVN version also lacks a few other things which are included in the source tarballs. In order to create the missing stuff, you'll need the following additional tools:</p><div class="itemizedlist"><ul type="disc"><li><p><a href="http://xml.apache.org/batik/svgrasterizer.html" target="_top">Batik SVG Rasterizer</a>: an image converter used to create the images from the <acronym class="acronym">SVG</acronym> sources. The Makefile calls a script in your path called <code class="filename">batik-rasterizer</code> which is supposed to run this Java application appropriately.</p></li><li><p><a href="http://dtdparse.sourceforge.net" target="_top">dtdparse</a>: a Perl script (which in turn depends on a few Perl modules, see the installation instuctions) which generates the DTD documentation.</p></li><li><p><a href="http://www.thaiopensource.com/relaxng/trang.html" target="_top">trang</a>: a tool required to turn the RefDB DTDs into RelaxNG schemas.</p></li></ul></div><p>To work around problems, you may want to use the following <span><strong class="command">./configure</strong></span> switches:</p><div class="itemizedlist"><ul type="disc"><li><p>--with-trang-jar=PATH</p></li><li><p>--disable-docs</p></li></ul></div></li><li><p>Finally you're ready to build RefDB like you would with a <a href="ch04s04.html#sect-install-from-sources-unix" title="Installation from the sources">released version</a>.</p></li></ol></div><p>There is also a neat shell script available on the RefDB <a href="http://refdb.sourceforge.net/download.html" target="_top">download page</a> which helps you to keep a SVN version up to date with a minimum number of keystrokes.</p></div><div class="sect3" lang="en" xml:lang="en"><div class="titlepage"><div><div><h4 class="title"><a id="id2580045"></a>Installation of refdbd as a daemon</h4></div></div></div><p>This is all it takes to run RefDB from the command line. If you want to start refdbd as a daemon at system startup, a few more steps are necessary. The exact procedure varies greatly between operating systems and distributions. First we'll look at SysV-style systems (most Linux distributions), then at BSD-style systems (BSD-derived Unices and the Slackware Linux distribution).</p><div class="sect4" lang="en" xml:lang="en"><div class="titlepage"><div><div><h5 class="title"><a id="id2580055"></a>SysV-style</h5></div></div></div><p>The following procedure describes the setup on a Debian GNU/Linux system. With a little help of your system handbook you should be able to adapt this to your system. On many systems <code class="filename">/etc/init.d/README</code> contains just what you need to know or at least it points you to the correct resources.</p><div class="procedure"><ol type="1"><li><p>Review the parameters in the script <code class="filename">refdb</code> in the <code class="filename">scripts</code> directory of the source distribution (this file is not automatically installed). If necessary, change the paths and names to your needs and adapt the following steps. Make sure the <code class="varname">BSDSTYLE</code> variable is set to "NO" (this is the default value).</p></li><li><p>Copy the script <code class="filename">refdb</code> to <code class="filename">/etc/init.d/</code> and make sure it is executable: <span><strong class="command">chmod 755 /etc/init.d/refdb</strong></span>.</p></li><li><p>Create symbolic links from every runlevel directory that should start refdbd to <code class="filename">/etc/init.d/refdb</code>, e.g. <span><strong class="command">ln -s /etc/init.d/refdb /etc/rc2.d/S93refdb</strong></span>. The numbers in the link names are a convenient and simple way to determine the sequence of daemon starts. As most likely no other daemons rely on RefDB, you can choose as high a number as you want (the daemons are started in lexicographical order).</p></li><li><p>In analogy to the previous step, generate symbolic links in every runlevel directory that should stop the daemon. Usually these are the runlevels 0 (system halt) and 6 (reboot):</p><p>
-+ </pre><div class="note" style="margin-left: 0.5in; margin-right: 0.5in;"><h3 class="title">Note</h3><p>The autotools can cause severe headaches at times. If the above command causes errors, read <code class="filename">autogen.sh</code> and run the commands manually, substituting different versions as appropriate. E.g. substitute <span><strong class="command">automake</strong></span> with <span><strong class="command">automake-1.8</strong></span> if this gives better results. The native autotools shipped with FreeBSD 5.4 and later are unusable for our purposes, you have to install the gnu-autotools package instead. You have to modify your <code class="envar">PATH</code> to pick up the latter, and fiddle with the m4 macro paths in order to see the light.</p></div></li><li><p>The SVN version also lacks a few other things which are included in the source tarballs. In order to create the missing stuff, you'll need the following additional tools:</p><div class="itemizedlist"><ul type="disc"><li><p><a href="http://xml.apache.org/batik/svgrasterizer.html" target="_top">Batik SVG Rasterizer</a>: an image converter used to create the images from the <acronym class="acronym">SVG</acronym> sources. The Makefile calls a script in your path called <code class="filename">rasterizer</code> which is supposed to run this Java application appropriately.</p></li><li><p><a href="http://dtdparse.sourceforge.net" target="_top">dtdparse</a>: a Perl script (which in turn depends on a few Perl modules, see the installation instuctions) which generates the DTD documentation.</p></li><li><p><a href="http://www.thaiopensource.com/relaxng/trang.html" target="_top">trang</a>: a tool required to turn the RefDB DTDs into RelaxNG schemas.</p></li></ul></div><p>To work around problems, you may want to use the following <span><strong class="command">./configure</strong></span> switches:</p><div class="itemizedlist"><ul type="disc"><li><p>--with-trang-jar=PATH</p></li><li><p>--disable-docs</p></li></ul></div></li><li><p>Finally you're ready to build RefDB like you would with a <a href="ch04s04.html#sect-install-from-sources-unix" title="Installation from the sources">released version</a>.</p></li></ol></div><p>There is also a neat shell script available on the RefDB <a href="http://refdb.sourceforge.net/download.html" target="_top">download page</a> which helps you to keep a SVN version up to date with a minimum number of keystrokes.</p></div><div class="sect3" lang="en" xml:lang="en"><div class="titlepage"><div><div><h4 class="title"><a id="id2580045"></a>Installation of refdbd as a daemon</h4></div></div></div><p>This is all it takes to run RefDB from the command line. If you want to start refdbd as a daemon at system startup, a few more steps are necessary. The exact procedure varies greatly between operating systems and distributions. First we'll look at SysV-style systems (most Linux distributions), then at BSD-style systems (BSD-derived Unices and the Slackware Linux distribution).</p><div class="sect4" lang="en" xml:lang="en"><div class="titlepage"><div><div><h5 class="title"><a id="id2580055"></a>SysV-style</h5></div></div></div><p>The following procedure describes the setup on a Debian GNU/Linux system. With a little help of your system handbook you should be able to adapt this to your system. On many systems <code class="filename">/etc/init.d/README</code> contains just what you need to know or at least it points you to the correct resources.</p><div class="procedure"><ol type="1"><li><p>Review the parameters in the script <code class="filename">refdb</code> in the <code class="filename">scripts</code> directory of the source distribution (this file is not automatically installed). If necessary, change the paths and names to your needs and adapt the following steps. Make sure the <code class="varname">BSDSTYLE</code> variable is set to "NO" (this is the default value).</p></li><li><p>Copy the script <code class="filename">refdb</code> to <code class="filename">/etc/init.d/</code> and make sure it is executable: <span><strong class="command">chmod 755 /etc/init.d/refdb</strong></span>.</p></li><li><p>Create symbolic links from every runlevel directory that should start refdbd to <code class="filename">/etc/init.d/refdb</code>, e.g. <span><strong class="command">ln -s /etc/init.d/refdb /etc/rc2.d/S93refdb</strong></span>. The numbers in the link names are a convenient and simple way to determine the sequence of daemon starts. As most likely no other daemons rely on RefDB, you can choose as high a number as you want (the daemons are started in lexicographical order).</p></li><li><p>In analogy to the previous step, generate symbolic links in every runlevel directory that should stop the daemon. Usually these are the runlevels 0 (system halt) and 6 (reboot):</p><p>
- <span><strong class="command">ln -s /etc/init.d/refdb /etc/rc0.d/K20refdb</strong></span>
- </p><p>
- <span><strong class="command">ln -s /etc/init.d/refdb /etc/rc6.d/K20refdb</strong></span>
Modified: packages/refdb/trunk/debian/patches/fixversion.patch
URL: http://svn.debian.org/wsvn/debian-xml-sgml/packages/refdb/trunk/debian/patches/fixversion.patch?rev=2143&op=diff
==============================================================================
--- packages/refdb/trunk/debian/patches/fixversion.patch (original)
+++ packages/refdb/trunk/debian/patches/fixversion.patch Thu Jan 10 11:22:31 2013
@@ -2,8 +2,10 @@
Author: Mathieu Malaterre <malat at debian.org>
Forwarded: not-needed
---- refdb-0.9.9.orig/configure.in
-+++ refdb-0.9.9/configure.in
+Index: refdb-0.9.9/configure.in
+===================================================================
+--- refdb-0.9.9.orig/configure.in 2013-01-10 11:19:46.368207959 +0000
++++ refdb-0.9.9/configure.in 2013-01-10 11:19:46.308207957 +0000
@@ -1,7 +1,7 @@
dnl Process this file with autoconf to produce a configure script.
@@ -13,1114 +15,13 @@
AC_CONFIG_SRCDIR(src/backend-ris.c)
dnl Find out host type
---- refdb-0.9.9.orig/configure
-+++ refdb-0.9.9/configure
-@@ -1,81 +1,415 @@
- #! /bin/sh
- # Guess values for system-dependent variables and create Makefiles.
--# Generated by GNU Autoconf 2.59 for refdb 0.9.9-1.
-+# Generated by GNU Autoconf 2.67 for refdb 0.9.9.
-+#
-+#
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-+# Foundation, Inc.
-+#
- #
--# Copyright (C) 2003 Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
--## --------------------- ##
--## M4sh Initialization. ##
--## --------------------- ##
-+## -------------------- ##
-+## M4sh Initialization. ##
-+## -------------------- ##
-
--# Be Bourne compatible
--if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
-- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in #(
-+ *posix*) :
-+ set -o posix ;; #(
-+ *) :
-+ ;;
-+esac
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
--# Support unset when possible.
--if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-- as_unset=unset
--else
-- as_unset=false
-+
-+as_nl='
-+'
-+export as_nl
-+# Printing a long string crashes Solaris 7 /usr/bin/printf.
-+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-+# Prefer a ksh shell builtin over an external printf program on Solaris,
-+# but without wasting forks for bash or zsh.
-+if test -z "$BASH_VERSION$ZSH_VERSION" \
-+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-+ as_echo='print -r --'
-+ as_echo_n='print -rn --'
-+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-+ as_echo='printf %s\n'
-+ as_echo_n='printf %s'
-+else
-+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-+ as_echo_n='/usr/ucb/echo -n'
-+ else
-+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-+ as_echo_n_body='eval
-+ arg=$1;
-+ case $arg in #(
-+ *"$as_nl"*)
-+ expr "X$arg" : "X\\(.*\\)$as_nl";
-+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-+ esac;
-+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-+ '
-+ export as_echo_n_body
-+ as_echo_n='sh -c $as_echo_n_body as_echo'
-+ fi
-+ export as_echo_body
-+ as_echo='sh -c $as_echo_body as_echo'
-+fi
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ PATH_SEPARATOR=:
-+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-+ PATH_SEPARATOR=';'
-+ }
- fi
-
-
--# Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in #((
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+ done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ exit 1
-+fi
-+
-+# Unset variables that we do not need and which cause bugs (e.g. in
-+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-+# suppresses any "Segmentation fault" message there. '((' could
-+# trigger a bug in pdksh 5.2.14.
-+for as_var in BASH_ENV ENV MAIL MAILPATH
-+do eval test x\${$as_var+set} = xset \
-+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-
- # NLS nuisances.
--for as_var in \
-- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-- LC_TELEPHONE LC_TIME
-+LC_ALL=C
-+export LC_ALL
-+LANGUAGE=C
-+export LANGUAGE
-+
-+# CDPATH.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test "x$CONFIG_SHELL" = x; then
-+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-+ emulate sh
-+ NULLCMD=:
-+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case \`(set -o) 2>/dev/null\` in #(
-+ *posix*) :
-+ set -o posix ;; #(
-+ *) :
-+ ;;
-+esac
-+fi
-+"
-+ as_required="as_fn_return () { (exit \$1); }
-+as_fn_success () { as_fn_return 0; }
-+as_fn_failure () { as_fn_return 1; }
-+as_fn_ret_success () { return 0; }
-+as_fn_ret_failure () { return 1; }
-+
-+exitcode=0
-+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-+
-+else
-+ exitcode=1; echo positional parameters were not saved.
-+fi
-+test x\$exitcode = x0 || exit 1"
-+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-+test \$(( 1 + 1 )) = 2 || exit 1"
-+ if (eval "$as_required") 2>/dev/null; then :
-+ as_have_required=yes
-+else
-+ as_have_required=no
-+fi
-+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-+
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+as_found=false
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
- do
-- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-- eval $as_var=C; export $as_var
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ as_found=:
-+ case $as_dir in #(
-+ /*)
-+ for as_base in sh bash ksh sh5; do
-+ # Try only shells that exist, to save several forks.
-+ as_shell=$as_dir/$as_base
-+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-+ CONFIG_SHELL=$as_shell as_have_required=yes
-+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-+ break 2
-+fi
-+fi
-+ done;;
-+ esac
-+ as_found=false
-+done
-+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-+ CONFIG_SHELL=$SHELL as_have_required=yes
-+fi; }
-+IFS=$as_save_IFS
-+
-+
-+ if test "x$CONFIG_SHELL" != x; then :
-+ # We cannot yet assume a decent shell, so we have to provide a
-+ # neutralization value for shells without unset; and this also
-+ # works around shells that cannot unset nonexistent variables.
-+ BASH_ENV=/dev/null
-+ ENV=/dev/null
-+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+ if test x$as_have_required = xno; then :
-+ $as_echo "$0: This script requires a shell more modern than all"
-+ $as_echo "$0: the shells that I found on your system."
-+ if test x${ZSH_VERSION+set} = xset ; then
-+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
-- $as_unset $as_var
-+ $as_echo "$0: Please tell bug-autoconf at gnu.org about your system,
-+$0: including any error possibly output before this
-+$0: message. Then install a modern shell, or manually run
-+$0: the script under such a shell if you do have one."
- fi
--done
-+ exit 1
-+fi
-+fi
-+fi
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+export SHELL
-+# Unset more variables known to interfere with behavior of common tools.
-+CLICOLOR_FORCE= GREP_OPTIONS=
-+unset CLICOLOR_FORCE GREP_OPTIONS
-+
-+## --------------------- ##
-+## M4sh Shell Functions. ##
-+## --------------------- ##
-+# as_fn_unset VAR
-+# ---------------
-+# Portably unset VAR.
-+as_fn_unset ()
-+{
-+ { eval $1=; unset $1;}
-+}
-+as_unset=as_fn_unset
-+
-+# as_fn_set_status STATUS
-+# -----------------------
-+# Set $? to STATUS, without forking.
-+as_fn_set_status ()
-+{
-+ return $1
-+} # as_fn_set_status
-+
-+# as_fn_exit STATUS
-+# -----------------
-+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-+as_fn_exit ()
-+{
-+ set +e
-+ as_fn_set_status $1
-+ exit $1
-+} # as_fn_exit
-+
-+# as_fn_mkdir_p
-+# -------------
-+# Create "$as_dir" as a directory, including parents if necessary.
-+as_fn_mkdir_p ()
-+{
-+
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || eval $as_mkdir_p || {
-+ as_dirs=
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
-+ done
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-+
-+
-+} # as_fn_mkdir_p
-+# as_fn_append VAR VALUE
-+# ----------------------
-+# Append the text in VALUE to the end of the definition contained in VAR. Take
-+# advantage of any shell optimizations that allow amortized linear growth over
-+# repeated appends, instead of the typical quadratic growth present in naive
-+# implementations.
-+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-+ eval 'as_fn_append ()
-+ {
-+ eval $1+=\$2
-+ }'
-+else
-+ as_fn_append ()
-+ {
-+ eval $1=\$$1\$2
-+ }
-+fi # as_fn_append
-+
-+# as_fn_arith ARG...
-+# ------------------
-+# Perform arithmetic evaluation on the ARGs, and store the result in the
-+# global $as_val. Take advantage of shells that can avoid forks. The arguments
-+# must be portable across $(()) and expr.
-+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-+ eval 'as_fn_arith ()
-+ {
-+ as_val=$(( $* ))
-+ }'
-+else
-+ as_fn_arith ()
-+ {
-+ as_val=`expr "$@" || test $? -eq 1`
-+ }
-+fi # as_fn_arith
-+
-+
-+# as_fn_error STATUS ERROR [LINENO LOG_FD]
-+# ----------------------------------------
-+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-+# script with STATUS, using 1 if that was 0.
-+as_fn_error ()
-+{
-+ as_status=$1; test $as_status -eq 0 && as_status=1
-+ if test "$4"; then
-+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-+ fi
-+ $as_echo "$as_me: error: $2" >&2
-+ as_fn_exit $as_status
-+} # as_fn_error
-
--# Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
- fi
-
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-
--# Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
--
--# PATH needs CR, and LINENO needs CR and PATH.
- # Avoid depending upon Character Ranges.
- as_cr_letters='abcdefghijklmnopqrstuvwxyz'
- as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-@@ -83,146 +417,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
- as_cr_digits='0123456789'
- as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
--fi
--
--
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
--
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-- /*)
-- if ("$as_dir/$as_base" -c '
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-
-- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
-+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
-+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-- { (exit 1); exit 1; }; }
-+ chmod +x "$as_me.lineno" ||
-+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
--
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in #(((((
-+-n*)
-+ case `echo 'xy\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ xy) ECHO_C='\c';;
-+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
-+ ECHO_T=' ';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-- as_expr=expr
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
- else
-- as_expr=false
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir 2>/dev/null
- fi
--
--rm -f conf$$ conf$$.exe conf$$.file
--echo >conf$$.file
--if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-- as_ln_s='cp -p'
-- else
-+if (echo >conf$$.file) 2>/dev/null; then
-+ if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+ elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+ else
-+ as_ln_s='cp -p'
- fi
--elif ln conf$$.file conf$$ 2>/dev/null; then
-- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
-- as_mkdir_p=:
-+ as_mkdir_p='mkdir -p "$as_dir"'
- else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in #(
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -231,90 +526,257 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
--
-+test -n "$DJDIR" || exec 7<&0 </dev/null
-+exec 6>&1
-
- # Name of the host.
--# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
- # so uname gets run too.
- ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
--exec 6>&1
--
- #
- # Initializations.
- #
- ac_default_prefix=/usr/local
-+ac_clean_files=
- ac_config_libobj_dir=.
-+LIBOBJS=
- cross_compiling=no
- subdirs=
- MFLAGS=
- MAKEFLAGS=
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--# Maximum number of lines to put in a shell here document.
--# This variable seems obsolete. It should probably be removed, and
--# only ac_max_sed_lines should be used.
--: ${ac_max_here_lines=38}
-
- # Identity of this package.
- PACKAGE_NAME='refdb'
- PACKAGE_TARNAME='refdb'
--PACKAGE_VERSION='0.9.9-1'
--PACKAGE_STRING='refdb 0.9.9-1'
-+PACKAGE_VERSION='0.9.9'
-+PACKAGE_STRING='refdb 0.9.9'
- PACKAGE_BUGREPORT=''
-+PACKAGE_URL=''
-
- ac_unique_file="src/backend-ris.c"
- # Factoring default headers for most tests.
- ac_includes_default="\
- #include <stdio.h>
--#if HAVE_SYS_TYPES_H
-+#ifdef HAVE_SYS_TYPES_H
- # include <sys/types.h>
- #endif
--#if HAVE_SYS_STAT_H
-+#ifdef HAVE_SYS_STAT_H
- # include <sys/stat.h>
- #endif
--#if STDC_HEADERS
-+#ifdef STDC_HEADERS
- # include <stdlib.h>
- # include <stddef.h>
- #else
--# if HAVE_STDLIB_H
-+# ifdef HAVE_STDLIB_H
- # include <stdlib.h>
- # endif
- #endif
--#if HAVE_STRING_H
--# if !STDC_HEADERS && HAVE_MEMORY_H
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
- # include <memory.h>
- # endif
- # include <string.h>
- #endif
--#if HAVE_STRINGS_H
-+#ifdef HAVE_STRINGS_H
- # include <strings.h>
- #endif
--#if HAVE_INTTYPES_H
-+#ifdef HAVE_INTTYPES_H
- # include <inttypes.h>
--#else
--# if HAVE_STDINT_H
--# include <stdint.h>
--# endif
- #endif
--#if HAVE_UNISTD_H
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
- # include <unistd.h>
- #endif"
-
--ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE myshell myjade myperl myxsltproc myxmlcatalog mydtdparse mydtdformat mysgrep mytidy mybatik svnversioncommand HAVEBATIK_TRUE HAVEBATIK_FALSE HAVESERVER_TRUE HAVESERVER_FALSE HAVESVNWC_TRUE HAVESVNWC_FALSE LIBICONV LTLIBICONV CPP EGREP refdba_LDADD refdbc_LDADD refdbd_LDADD bib2ris_LDADD BIB2RIS mysvnversion sgml_decl xml_decl docbk_xsl docbk_xsl_ns tei_xsl tei_xsl_ns classpath_root log_dir var_dir main_db db_dir ULLSPEC psarg trang_cmd server_subdirs client_subdirs docs_subdirs man_subdirs server_bins client_bins server_scripts client_scripts server_etc_objects client_etc_objects server_etc_distobjects client_etc_distobjects server_mans server8_mans client_mans client1_mans LIBOBJS LTLIBOBJS'
-+ac_subst_vars='LTLIBOBJS
-+LIBOBJS
-+client1_mans
-+client_mans
-+server8_mans
-+server_mans
-+client_etc_distobjects
-+server_etc_distobjects
-+client_etc_objects
-+server_etc_objects
-+client_scripts
-+server_scripts
-+client_bins
-+server_bins
-+man_subdirs
-+docs_subdirs
-+client_subdirs
-+server_subdirs
-+trang_cmd
-+psarg
-+ULLSPEC
-+db_dir
-+main_db
-+var_dir
-+log_dir
-+classpath_root
-+tei_xsl_ns
-+tei_xsl
-+docbk_xsl_ns
-+docbk_xsl
-+xml_decl
-+sgml_decl
-+mysvnversion
-+BIB2RIS
-+bib2ris_LDADD
-+refdbd_LDADD
-+refdbc_LDADD
-+refdba_LDADD
-+EGREP
-+GREP
-+CPP
-+LTLIBICONV
-+LIBICONV
-+HAVESVNWC_FALSE
-+HAVESVNWC_TRUE
-+HAVESERVER_FALSE
-+HAVESERVER_TRUE
-+HAVEBATIK_FALSE
-+HAVEBATIK_TRUE
-+svnversioncommand
-+mybatik
-+mytidy
-+mysgrep
-+mydtdformat
-+mydtdparse
-+myxmlcatalog
-+myxsltproc
-+myperl
-+myjade
-+myshell
-+am__fastdepCC_FALSE
-+am__fastdepCC_TRUE
-+CCDEPMODE
-+AMDEPBACKSLASH
-+AMDEP_FALSE
-+AMDEP_TRUE
-+am__quote
-+am__include
-+DEPDIR
-+OBJEXT
-+EXEEXT
-+ac_ct_CC
-+CPPFLAGS
-+LDFLAGS
-+CFLAGS
-+CC
-+am__untar
-+am__tar
-+AMTAR
-+am__leading_dot
-+SET_MAKE
-+AWK
-+mkdir_p
-+INSTALL_STRIP_PROGRAM
-+STRIP
-+install_sh
-+MAKEINFO
-+AUTOHEADER
-+AUTOMAKE
-+AUTOCONF
-+ACLOCAL
-+VERSION
-+PACKAGE
-+CYGPATH_W
-+INSTALL_DATA
-+INSTALL_SCRIPT
-+INSTALL_PROGRAM
-+host_os
-+host_vendor
-+host_cpu
-+host
-+build_os
-+build_vendor
-+build_cpu
-+build
-+target_alias
-+host_alias
-+build_alias
-+LIBS
-+ECHO_T
-+ECHO_N
-+ECHO_C
-+DEFS
-+mandir
-+localedir
-+libdir
-+psdir
-+pdfdir
-+dvidir
-+htmldir
-+infodir
-+docdir
-+oldincludedir
-+includedir
-+localstatedir
-+sharedstatedir
-+sysconfdir
-+datadir
-+datarootdir
-+libexecdir
-+sbindir
-+bindir
-+program_transform_name
-+prefix
-+exec_prefix
-+PACKAGE_URL
-+PACKAGE_BUGREPORT
-+PACKAGE_STRING
-+PACKAGE_VERSION
-+PACKAGE_TARNAME
-+PACKAGE_NAME
-+PATH_SEPARATOR
-+SHELL'
- ac_subst_files=''
-+ac_user_opts='
-+enable_option_checking
-+enable_dependency_tracking
-+with_libdbi_lib
-+with_expat_lib
-+with_btparse_lib
-+with_sgml_declaration
-+with_xml_declaration
-+with_docbook_xsl
-+with_docbook_xsl_ns
-+with_tei_xsl
-+with_tei_xsl_ns
-+with_classpath_root
-+with_var_dir
-+with_log_dir
-+with_main_db
-+with_db_dir
-+with_trang_jar
-+enable_docs
-+enable_manpages
-+enable_server
-+enable_clients
-+with_gnu_ld
-+enable_rpath
-+with_libiconv_prefix
-+'
-+ ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CPP'
-+
-
- # Initialize some variables set by options.
- ac_init_help=
- ac_init_version=false
-+ac_unrecognized_opts=
-+ac_unrecognized_sep=
- # The variables have the same names as the options, with
- # dashes changed to underlines.
- cache_file=/dev/null
-@@ -337,34 +799,49 @@ x_libraries=NONE
- # and all the variables that are supposed to be based on exec_prefix
- # by default will actually change.
- # Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
--datadir='${prefix}/share'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
- sysconfdir='${prefix}/etc'
- sharedstatedir='${prefix}/com'
- localstatedir='${prefix}/var'
--libdir='${exec_prefix}/lib'
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
--infodir='${prefix}/info'
--mandir='${prefix}/man'
-+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-
- ac_prev=
-+ac_dashdash=
- for ac_option
- do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
-- eval "$ac_prev=\$ac_option"
-+ eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
-- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-+ case $ac_option in
-+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+ *=) ac_optarg= ;;
-+ *) ac_optarg=yes ;;
-+ esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case $ac_option in
-+ case $ac_dashdash$ac_option in
-+ --)
-+ ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
-@@ -386,33 +863,59 @@ do
- --config-cache | -C)
- cache_file=config.cache ;;
-
-- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-+ -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
-- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-- | --da=*)
-+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
-+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+ | --dataroo | --dataro | --datar)
-+ ac_prev=datarootdir ;;
-+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+ datarootdir=$ac_optarg ;;
-+
- -disable-* | --disable-*)
-- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- eval "enable_$ac_feature=no" ;;
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ as_fn_error $? "invalid feature name: $ac_useropt"
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"enable_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
-+ esac
-+ eval enable_$ac_useropt=no ;;
-+
-+ -docdir | --docdir | --docdi | --doc | --do)
-+ ac_prev=docdir ;;
-+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+ docdir=$ac_optarg ;;
-+
-+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+ ac_prev=dvidir ;;
-+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+ dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
-- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ as_fn_error $? "invalid feature name: $ac_useropt"
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"enable_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
- esac
-- eval "enable_$ac_feature='$ac_optarg'" ;;
-+ eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -439,6 +942,12 @@ do
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
+Index: refdb-0.9.9/configure
+===================================================================
+--- refdb-0.9.9.orig/configure 2013-01-10 11:19:46.368207959 +0000
++++ refdb-0.9.9/configure 2013-01-10 11:19:46.364207959 +0000
+@@ -976,6 +976,12 @@
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
@@ -1131,30 +32,9 @@
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-@@ -463,13 +972,16 @@ do
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
-+ -localedir | --localedir | --localedi | --localed | --locale)
-+ ac_prev=localedir ;;
-+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+ localedir=$ac_optarg ;;
-+
- -localstatedir | --localstatedir | --localstatedi | --localstated \
-- | --localstate | --localstat | --localsta | --localst \
-- | --locals | --local | --loca | --loc | --lo)
-+ | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-@@ -534,6 +1046,16 @@ do
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
+@@ -1084,6 +1090,16 @@
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
@@ -1169,293 +49,7 @@
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-@@ -584,26 +1106,36 @@ do
- ac_init_version=: ;;
-
- -with-* | --with-*)
-- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid package name: $ac_package" >&2
-- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ as_fn_error $? "invalid package name: $ac_useropt"
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"with_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
- esac
-- eval "with_$ac_package='$ac_optarg'" ;;
-+ eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
-- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid package name: $ac_package" >&2
-- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package | sed 's/-/_/g'`
-- eval "with_$ac_package=no" ;;
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ as_fn_error $? "invalid package name: $ac_useropt"
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"with_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
-+ esac
-+ eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -623,26 +1155,25 @@ do
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
-- -*) { echo "$as_me: error: unrecognized option: $ac_option
--Try \`$0 --help' for more information." >&2
-- { (exit 1); exit 1; }; }
-+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
-+Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-- { (exit 1); exit 1; }; }
-- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-- eval "$ac_envvar='$ac_optarg'"
-+ case $ac_envvar in #(
-+ '' | [0-9]* | *[!_$as_cr_alnum]* )
-+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-+ esac
-+ eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
-- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
-@@ -651,31 +1182,36 @@ done
-
- if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-- { echo "$as_me: error: missing argument to $ac_option" >&2
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "missing argument to $ac_option"
- fi
-
--# Be sure to have absolute paths.
--for ac_var in exec_prefix prefix
--do
-- eval ac_val=$`echo $ac_var`
-- case $ac_val in
-- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-+if test -n "$ac_unrecognized_opts"; then
-+ case $enable_option_checking in
-+ no) ;;
-+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
--done
-+fi
-
--# Be sure to have absolute paths.
--for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-- localstatedir libdir includedir oldincludedir infodir mandir
-+# Check all directory arguments for consistency.
-+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+ datadir sysconfdir sharedstatedir localstatedir includedir \
-+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+ libdir localedir mandir
- do
-- eval ac_val=$`echo $ac_var`
-+ eval ac_val=\$$ac_var
-+ # Remove trailing slashes.
-+ case $ac_val in
-+ */ )
-+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-+ eval $ac_var=\$ac_val;;
-+ esac
-+ # Be sure to have absolute directory names.
- case $ac_val in
-- [\\/$]* | ?:[\\/]* ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-+ [\\/$]* | ?:[\\/]* ) continue;;
-+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
-+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
- done
-
- # There might be people who depend on the old broken behavior: `$host'
-@@ -689,8 +1225,8 @@ target=$target_alias
- if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
-- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-- If a cross compiler is detected then cross compile mode will be used." >&2
-+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used" >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-@@ -702,74 +1238,72 @@ test -n "$host_alias" && ac_tool_prefix=
- test "$silent" = yes && exec 6>/dev/null
-
-
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+ as_fn_error $? "working directory cannot be determined"
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+ as_fn_error $? "pwd does not report name of working directory"
-+
-+
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
-- # Try the directory containing this script, then its parent.
-- ac_confdir=`(dirname "$0") 2>/dev/null ||
--$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X"$0" : 'X\(//\)[^/]' \| \
-- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$0" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ # Try the directory containing this script, then the parent directory.
-+ ac_confdir=`$as_dirname -- "$as_myself" ||
-+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_myself" : 'X\(//\)[^/]' \| \
-+ X"$as_myself" : 'X\(//\)$' \| \
-+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$as_myself" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
-- if test ! -r $srcdir/$ac_unique_file; then
-+ if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
- else
- ac_srcdir_defaulted=no
- fi
--if test ! -r $srcdir/$ac_unique_file; then
-- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-- { (exit 1); exit 1; }; }
-- else
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-- { (exit 1); exit 1; }; }
-- fi
--fi
--(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-- { (exit 1); exit 1; }; }
--srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
--ac_env_build_alias_set=${build_alias+set}
--ac_env_build_alias_value=$build_alias
--ac_cv_env_build_alias_set=${build_alias+set}
--ac_cv_env_build_alias_value=$build_alias
--ac_env_host_alias_set=${host_alias+set}
--ac_env_host_alias_value=$host_alias
--ac_cv_env_host_alias_set=${host_alias+set}
--ac_cv_env_host_alias_value=$host_alias
--ac_env_target_alias_set=${target_alias+set}
--ac_env_target_alias_value=$target_alias
--ac_cv_env_target_alias_set=${target_alias+set}
--ac_cv_env_target_alias_value=$target_alias
--ac_env_CC_set=${CC+set}
--ac_env_CC_value=$CC
--ac_cv_env_CC_set=${CC+set}
--ac_cv_env_CC_value=$CC
--ac_env_CFLAGS_set=${CFLAGS+set}
--ac_env_CFLAGS_value=$CFLAGS
--ac_cv_env_CFLAGS_set=${CFLAGS+set}
--ac_cv_env_CFLAGS_value=$CFLAGS
--ac_env_LDFLAGS_set=${LDFLAGS+set}
--ac_env_LDFLAGS_value=$LDFLAGS
--ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
--ac_cv_env_LDFLAGS_value=$LDFLAGS
--ac_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_env_CPPFLAGS_value=$CPPFLAGS
--ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_cv_env_CPPFLAGS_value=$CPPFLAGS
--ac_env_CPP_set=${CPP+set}
--ac_env_CPP_value=$CPP
--ac_cv_env_CPP_set=${CPP+set}
--ac_cv_env_CPP_value=$CPP
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
-+ pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+ srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_env_${ac_var}_value=\$${ac_var}
-+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-
- #
- # Report the --help message.
-@@ -778,7 +1312,7 @@ if test "$ac_init_help" = "long"; then
+@@ -1338,7 +1354,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
@@ -1464,1563 +58,7 @@
Usage: $0 [OPTION]... [VAR=VALUE]...
-@@ -792,20 +1326,17 @@ Configuration:
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
-- -q, --quiet, --silent do not print \`checking...' messages
-+ -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
--_ACEOF
--
-- cat <<_ACEOF
- Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
-- [$ac_default_prefix]
-+ [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-- [PREFIX]
-+ [PREFIX]
-
- By default, \`make install' will install all the files in
- \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-@@ -815,18 +1346,25 @@ for instance \`--prefix=\$HOME'.
- For better control, use the options below.
-
- Fine tuning of the installation directories:
-- --bindir=DIR user executables [EPREFIX/bin]
-- --sbindir=DIR system admin executables [EPREFIX/sbin]
-- --libexecdir=DIR program executables [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data [PREFIX/share]
-- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-- --libdir=DIR object code libraries [EPREFIX/lib]
-- --includedir=DIR C header files [PREFIX/include]
-- --oldincludedir=DIR C header files for non-gcc [/usr/include]
-- --infodir=DIR info documentation [PREFIX/info]
-- --mandir=DIR man documentation [PREFIX/man]
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root [DATAROOTDIR/doc/refdb]
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
- _ACEOF
-
- cat <<\_ACEOF
-@@ -844,11 +1382,12 @@ fi
-
- if test -n "$ac_init_help"; then
- case $ac_init_help in
-- short | recursive ) echo "Configuration of refdb 0.9.9-1:";;
-+ short | recursive ) echo "Configuration of refdb 0.9.9:";;
- esac
- cat <<\_ACEOF
-
- Optional Features:
-+ --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking speeds up one-time build
-@@ -886,147 +1425,522 @@ Some influential environment variables:
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
-- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-- headers in a nonstandard directory <include dir>
-+ LIBS libraries to pass to the linker, e.g. -l<library>
-+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-+ you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
- Use these variables to override the choices made by `configure' or to help
- it to find libraries and programs with nonstandard names/locations.
-
-+Report bugs to the package provider.
- _ACEOF
-+ac_status=$?
- fi
-
- if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
-- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-- test -d $ac_dir || continue
-+ test -d "$ac_dir" ||
-+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-+ continue
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
--esac
--
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-- cd $ac_dir
-- # Check for guested configure; otherwise get Cygnus style configure.
-- if test -f $ac_srcdir/configure.gnu; then
-- echo
-- $SHELL $ac_srcdir/configure.gnu --help=recursive
-- elif test -f $ac_srcdir/configure; then
-- echo
-- $SHELL $ac_srcdir/configure --help=recursive
-- elif test -f $ac_srcdir/configure.ac ||
-- test -f $ac_srcdir/configure.in; then
-- echo
-- $ac_configure --help
-+ cd "$ac_dir" || { ac_status=$?; continue; }
-+ # Check for guested configure.
-+ if test -f "$ac_srcdir/configure.gnu"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+ elif test -f "$ac_srcdir/configure"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure" --help=recursive
- else
-- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-- fi
-- cd $ac_popdir
-+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi || ac_status=$?
-+ cd "$ac_pwd" || { ac_status=$?; break; }
- done
- fi
-
--test -n "$ac_init_help" && exit 0
-+test -n "$ac_init_help" && exit $ac_status
- if $ac_init_version; then
- cat <<\_ACEOF
--refdb configure 0.9.9-1
--generated by GNU Autoconf 2.59
-+refdb configure 0.9.9
-+generated by GNU Autoconf 2.67
-
--Copyright (C) 2003 Free Software Foundation, Inc.
-+Copyright (C) 2010 Free Software Foundation, Inc.
- This configure script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it.
- _ACEOF
-- exit 0
-+ exit
- fi
--exec 5>config.log
--cat >&5 <<_ACEOF
--This file contains any messages produced by compilers while
--running configure, to aid debugging if configure makes a mistake.
-
--It was created by refdb $as_me 0.9.9-1, which was
--generated by GNU Autoconf 2.59. Invocation command line was
-+## ------------------------ ##
-+## Autoconf initialization. ##
-+## ------------------------ ##
-+
-+# ac_fn_c_try_compile LINENO
-+# --------------------------
-+# Try to compile conftest.$ac_ext, and return whether this succeeded.
-+ac_fn_c_try_compile ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ rm -f conftest.$ac_objext
-+ if { { ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_compile") 2>conftest.err
-+ ac_status=$?
-+ if test -s conftest.err; then
-+ grep -v '^ *+' conftest.err >conftest.er1
-+ cat conftest.er1 >&5
-+ mv -f conftest.er1 conftest.err
-+ fi
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then :
-+ ac_retval=0
-+else
-+ $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_retval=1
-+fi
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+ as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_compile
-+
-+# ac_fn_c_try_link LINENO
-+# -----------------------
-+# Try to link conftest.$ac_ext, and return whether this succeeded.
-+ac_fn_c_try_link ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ rm -f conftest.$ac_objext conftest$ac_exeext
-+ if { { ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_link") 2>conftest.err
-+ ac_status=$?
-+ if test -s conftest.err; then
-+ grep -v '^ *+' conftest.err >conftest.er1
-+ cat conftest.er1 >&5
-+ mv -f conftest.er1 conftest.err
-+ fi
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext && {
-+ test "$cross_compiling" = yes ||
-+ $as_test_x conftest$ac_exeext
-+ }; then :
-+ ac_retval=0
-+else
-+ $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_retval=1
-+fi
-+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-+ # interfere with the next link command; also delete a directory that is
-+ # left behind by Apple's compiler. We do this before executing the actions.
-+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+ as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_link
-+
-+# ac_fn_c_try_run LINENO
-+# ----------------------
-+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-+# that executables *can* be run.
-+ac_fn_c_try_run ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ if { { ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
-+ { { case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }; }; then :
-+ ac_retval=0
-+else
-+ $as_echo "$as_me: program exited with status $ac_status" >&5
-+ $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_retval=$ac_status
-+fi
-+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+ as_fn_set_status $ac_retval
-
-- $ $0 $@
-+} # ac_fn_c_try_run
-
-+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
-+# -------------------------------------------
-+# Tests whether TYPE exists after having included INCLUDES, setting cache
-+# variable VAR accordingly.
-+ac_fn_c_check_type ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if eval "test \"\${$3+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ eval "$3=no"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+$4
-+int
-+main ()
-+{
-+if (sizeof ($2))
-+ return 0;
-+ ;
-+ return 0;
-+}
- _ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+$4
-+int
-+main ()
- {
--cat <<_ASUNAME
--## --------- ##
--## Platform. ##
--## --------- ##
-+if (sizeof (($2)))
-+ return 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-
--hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
--uname -m = `(uname -m) 2>/dev/null || echo unknown`
--uname -r = `(uname -r) 2>/dev/null || echo unknown`
--uname -s = `(uname -s) 2>/dev/null || echo unknown`
--uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+else
-+ eval "$3=yes"
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+eval ac_res=\$$3
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
--/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
--/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+} # ac_fn_c_check_type
-
--/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
--/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
--/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
--hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+# ac_fn_c_try_cpp LINENO
-+# ----------------------
-+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-+ac_fn_c_try_cpp ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ if { { ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-+ ac_status=$?
-+ if test -s conftest.err; then
-+ grep -v '^ *+' conftest.err >conftest.er1
-+ cat conftest.er1 >&5
-+ mv -f conftest.er1 conftest.err
-+ fi
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; } > conftest.i && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then :
-+ ac_retval=0
-+else
-+ $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_retval=1
-+fi
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+ as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_cpp
-+
-+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-+# -------------------------------------------------------
-+# Tests whether HEADER exists and can be compiled using the include files in
-+# INCLUDES, setting the cache variable VAR accordingly.
-+ac_fn_c_check_header_compile ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if eval "test \"\${$3+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+$4
-+#include <$2>
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ eval "$3=yes"
-+else
-+ eval "$3=no"
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+eval ac_res=\$$3
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_header_compile
-+
-+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-+# -------------------------------------------------------
-+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-+# the include files in INCLUDES and setting the cache variable VAR
-+# accordingly.
-+ac_fn_c_check_header_mongrel ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ if eval "test \"\${$3+set}\"" = set; then :
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if eval "test \"\${$3+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
-+fi
-+eval ac_res=\$$3
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+else
-+ # Is the header compilable?
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-+$as_echo_n "checking $2 usability... " >&6; }
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+$4
-+#include <$2>
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ ac_header_compiler=yes
-+else
-+ ac_header_compiler=no
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-+$as_echo "$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-+$as_echo_n "checking $2 presence... " >&6; }
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+#include <$2>
-+_ACEOF
-+if ac_fn_c_try_cpp "$LINENO"; then :
-+ ac_header_preproc=yes
-+else
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.i conftest.$ac_ext
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-+$as_echo "$ac_header_preproc" >&6; }
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-+ yes:no: )
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-+ ;;
-+ no:yes:* )
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-+ ;;
-+esac
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if eval "test \"\${$3+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ eval "$3=\$ac_header_compiler"
-+fi
-+eval ac_res=\$$3
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+fi
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_header_mongrel
-+
-+# ac_fn_c_check_func LINENO FUNC VAR
-+# ----------------------------------
-+# Tests whether FUNC exists, setting the cache variable VAR accordingly
-+ac_fn_c_check_func ()
-+{
-+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if eval "test \"\${$3+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $2 innocuous_$2
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $2 (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef $2
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char $2 ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined __stub_$2 || defined __stub___$2
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return $2 ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_link "$LINENO"; then :
-+ eval "$3=yes"
-+else
-+ eval "$3=no"
-+fi
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+eval ac_res=\$$3
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_func
-+cat >config.log <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by refdb $as_me 0.9.9, which was
-+generated by GNU Autoconf 2.67. Invocation command line was
-+
-+ $ $0 $@
-+
-+_ACEOF
-+exec 5>>config.log
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
- /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
- /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
- /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-@@ -1038,8 +1952,9 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- echo "PATH: $as_dir"
--done
-+ $as_echo "PATH: $as_dir"
-+ done
-+IFS=$as_save_IFS
-
- } >&5
-
-@@ -1061,7 +1976,6 @@ _ACEOF
- ac_configure_args=
- ac_configure_args0=
- ac_configure_args1=
--ac_sep=
- ac_must_keep_next=false
- for ac_pass in 1 2
- do
-@@ -1072,13 +1986,13 @@ do
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *\'*)
-+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
-- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
-- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
-@@ -1094,104 +2008,115 @@ do
- -* ) ac_must_keep_next=true ;;
- esac
- fi
-- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-- # Get rid of the leading space.
-- ac_sep=" "
-+ as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
- done
--$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
--$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+{ ac_configure_args0=; unset ac_configure_args0;}
-+{ ac_configure_args1=; unset ac_configure_args1;}
-
- # When interrupted or exit'd, cleanup temporary files, and complete
- # config.log. We remove comments because anyway the quotes in there
- # would cause problems or look ugly.
--# WARNING: Be sure not to use single quotes in there, as some shells,
--# such as our DU 5.0 friend, will then `close' the trap.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
- trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
-- cat <<\_ASBOX
--## ---------------- ##
-+ $as_echo "## ---------------- ##
- ## Cache variables. ##
--## ---------------- ##
--_ASBOX
-+## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-+ *) { eval $ac_var=; unset $ac_var;} ;;
-+ esac ;;
-+ esac
-+ done
- (set) 2>&1 |
-- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- sed -n \
-- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-- ;;
-+ "s/'\''/'\''\\\\'\'''\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+ ;; #(
- *)
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--}
-+ esac |
-+ sort
-+)
- echo
-
-- cat <<\_ASBOX
--## ----------------- ##
-+ $as_echo "## ----------------- ##
- ## Output variables. ##
--## ----------------- ##
--_ASBOX
-+## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
-- cat <<\_ASBOX
--## ------------- ##
--## Output files. ##
--## ------------- ##
--_ASBOX
-+ $as_echo "## ------------------- ##
-+## File substitutions. ##
-+## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
-- cat <<\_ASBOX
--## ----------- ##
-+ $as_echo "## ----------- ##
- ## confdefs.h. ##
--## ----------- ##
--_ASBOX
-+## ----------- ##"
- echo
-- sed "/^$/d" confdefs.h | sort
-+ cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
-- echo "$as_me: caught signal $ac_signal"
-- echo "$as_me: exit $exit_status"
-+ $as_echo "$as_me: caught signal $ac_signal"
-+ $as_echo "$as_me: exit $exit_status"
- } >&5
-- rm -f core *.core &&
-- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ rm -f core *.core core.conftest.* &&
-+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-- ' 0
-+' 0
- for ac_signal in 1 2 13 15; do
-- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
- done
- ac_signal=0
-
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo >confdefs.h
-+rm -f -r conftest* confdefs.h
-+
-+$as_echo "/* confdefs.h */" > confdefs.h
-
- # Predefined preprocessor variables.
-
-@@ -1199,112 +2124,137 @@ cat >>confdefs.h <<_ACEOF
- #define PACKAGE_NAME "$PACKAGE_NAME"
- _ACEOF
-
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
- _ACEOF
-
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_VERSION "$PACKAGE_VERSION"
- _ACEOF
-
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_STRING "$PACKAGE_STRING"
- _ACEOF
-
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
- _ACEOF
-
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_URL "$PACKAGE_URL"
-+_ACEOF
-+
-
- # Let the site file select an alternate cache file if it wants to.
--# Prefer explicitly selected file to automatically selected ones.
--if test -z "$CONFIG_SITE"; then
-- if test "x$prefix" != xNONE; then
-- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-- else
-- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-- fi
--fi
--for ac_site_file in $CONFIG_SITE; do
-- if test -r "$ac_site_file"; then
-- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
--echo "$as_me: loading site script $ac_site_file" >&6;}
-+# Prefer an explicitly selected file to automatically selected ones.
-+ac_site_file1=NONE
-+ac_site_file2=NONE
-+if test -n "$CONFIG_SITE"; then
-+ # We do not want a PATH search for config.site.
-+ case $CONFIG_SITE in #((
-+ -*) ac_site_file1=./$CONFIG_SITE;;
-+ */*) ac_site_file1=$CONFIG_SITE;;
-+ *) ac_site_file1=./$CONFIG_SITE;;
-+ esac
-+elif test "x$prefix" != xNONE; then
-+ ac_site_file1=$prefix/share/config.site
-+ ac_site_file2=$prefix/etc/config.site
-+else
-+ ac_site_file1=$ac_default_prefix/share/config.site
-+ ac_site_file2=$ac_default_prefix/etc/config.site
-+fi
-+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-+do
-+ test "x$ac_site_file" = xNONE && continue
-+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
-- . "$ac_site_file"
-+ . "$ac_site_file" \
-+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error $? "failed to load site script $ac_site_file
-+See \`config.log' for more details" "$LINENO" 5 ; }
- fi
- done
-
- if test -r "$cache_file"; then
-- # Some versions of bash will fail to source /dev/null (special
-- # files actually), so we avoid doing that.
-- if test -f "$cache_file"; then
-- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
--echo "$as_me: loading cache $cache_file" >&6;}
-+ # Some versions of bash will fail to source /dev/null (special files
-+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
-+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-+$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
-- [\\/]* | ?:[\\/]* ) . $cache_file;;
-- *) . ./$cache_file;;
-+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+ *) . "./$cache_file";;
- esac
- fi
- else
-- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
--echo "$as_me: creating cache $cache_file" >&6;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-+$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
- fi
-
- # Check that the precious variables saved in the cache have kept the same
- # value.
- ac_cache_corrupted=false
--for ac_var in `(set) 2>&1 |
-- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
-- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-- eval ac_new_val="\$ac_env_${ac_var}_value"
-+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+ eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
-- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
--echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
-- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
--echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
-- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
--echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
--echo "$as_me: former value: $ac_old_val" >&2;}
-- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
--echo "$as_me: current value: $ac_new_val" >&2;}
-- ac_cache_corrupted=:
-+ # differences in whitespace do not lead to failure.
-+ ac_old_val_w=`echo x $ac_old_val`
-+ ac_new_val_w=`echo x $ac_new_val`
-+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ ac_cache_corrupted=:
-+ else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-+ eval $ac_var=\$ac_old_val
-+ fi
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
- done
- if $ac_cache_corrupted; then
-- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
--echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
--echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-- { (exit 1); exit 1; }; }
--fi
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-+fi
-+## -------------------- ##
-+## Main body of script. ##
-+## -------------------- ##
-
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
-@@ -1315,108 +2265,104 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
- ac_aux_dir=
--for ac_dir in ./conf $srcdir/./conf; do
-- if test -f $ac_dir/install-sh; then
-+for ac_dir in ./conf "$srcdir"/./conf; do
-+ if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
-- elif test -f $ac_dir/install.sh; then
-+ elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-- elif test -f $ac_dir/shtool; then
-+ elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./conf $srcdir/./conf" >&5
--echo "$as_me: error: cannot find install-sh or install.sh in ./conf $srcdir/./conf" >&2;}
-- { (exit 1); exit 1; }; }
--fi
--ac_config_guess="$SHELL $ac_aux_dir/config.guess"
--ac_config_sub="$SHELL $ac_aux_dir/config.sub"
--ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in ./conf \"$srcdir\"/./conf" "$LINENO" 5
-+fi
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-+
-
- # Make sure we can run config.sub.
--$ac_config_sub sun4 >/dev/null 2>&1 ||
-- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
--echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-- { (exit 1); exit 1; }; }
--
--echo "$as_me:$LINENO: checking build system type" >&5
--echo $ECHO_N "checking build system type... $ECHO_C" >&6
--if test "${ac_cv_build+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- ac_cv_build_alias=$build_alias
--test -z "$ac_cv_build_alias" &&
-- ac_cv_build_alias=`$ac_config_guess`
--test -z "$ac_cv_build_alias" &&
-- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
--echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-- { (exit 1); exit 1; }; }
--ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
--echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-- { (exit 1); exit 1; }; }
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
--fi
--echo "$as_me:$LINENO: result: $ac_cv_build" >&5
--echo "${ECHO_T}$ac_cv_build" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-+$as_echo_n "checking build system type... " >&6; }
-+if test "${ac_cv_build+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
-+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-+
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-+$as_echo "$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
-+esac
- build=$ac_cv_build
--build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--
--
--echo "$as_me:$LINENO: checking host system type" >&5
--echo $ECHO_N "checking host system type... $ECHO_C" >&6
--if test "${ac_cv_host+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- ac_cv_host_alias=$host_alias
--test -z "$ac_cv_host_alias" &&
-- ac_cv_host_alias=$ac_cv_build_alias
--ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
--echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-- { (exit 1); exit 1; }; }
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-+$as_echo_n "checking host system type... " >&6; }
-+if test "${ac_cv_host+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test "x$host_alias" = x; then
-+ ac_cv_host=$ac_cv_build
-+else
-+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-+fi
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_host" >&5
--echo "${ECHO_T}$ac_cv_host" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-+$as_echo "$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
-+esac
- host=$ac_cv_host
--host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-
-@@ -1434,22 +2380,23 @@ am__api_version="1.9"
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
--echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-+# Reject install programs that cannot install multiple files.
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-+$as_echo_n "checking for a BSD-compatible install... " >&6; }
- if test -z "$INSTALL"; then
--if test "${ac_cv_path_install+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+if test "${ac_cv_path_install+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- # Account for people who put trailing slashes in PATH elements.
--case $as_dir/ in
-- ./ | .// | /cC/* | \
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in #((
-+ ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
-@@ -1457,7 +2404,7 @@ case $as_dir/ in
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
-@@ -1467,30 +2414,43 @@ case $as_dir/ in
- # program-specific install script used by HP pwplus--don't use.
- :
- else
-- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-- break 3
-+ rm -rf conftest.one conftest.two conftest.dir
-+ echo one > conftest.one
-+ echo two > conftest.two
-+ mkdir conftest.dir
-+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-+ test -s conftest.one && test -s conftest.two &&
-+ test -s conftest.dir/conftest.one &&
-+ test -s conftest.dir/conftest.two
-+ then
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
- fi
- fi
- done
- done
- ;;
- esac
--done
-
-+ done
-+IFS=$as_save_IFS
-+
-+rm -rf conftest.one conftest.two conftest.dir
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
-- # As a last resort, use the slow shell script. We don't cache a
-- # path for INSTALL within a source directory, because that will
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
-- # removed, or if the path is relative.
-+ # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
- fi
--echo "$as_me:$LINENO: result: $INSTALL" >&5
--echo "${ECHO_T}$INSTALL" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-+$as_echo "$INSTALL" >&6; }
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
-@@ -1500,8 +2460,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--echo "$as_me:$LINENO: checking whether build environment is sane" >&5
--echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-+$as_echo_n "checking whether build environment is sane... " >&6; }
- # Just in case
- sleep 1
- echo timestamp > conftest.file
-@@ -1524,11 +2484,8 @@ if (
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
-- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
--alias in your environment" >&5
--echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
--alias in your environment" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" "$LINENO" 5
- fi
-
- test "$2" = conftest.file
-@@ -1537,26 +2494,20 @@ then
- # Ok.
- :
- else
-- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
--Check your system clock" >&5
--echo "$as_me: error: newly created file is older than distributed files!
--Check your system clock" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "newly created file is older than distributed files!
-+Check your system clock" "$LINENO" 5
- fi
--echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-+$as_echo "yes" >&6; }
- test "$program_prefix" != NONE &&
-- program_transform_name="s,^,$program_prefix,;$program_transform_name"
-+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
- # Use a double $ so make ignores it.
- test "$program_suffix" != NONE &&
-- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
--# Double any \ or $. echo might interpret backslashes.
-+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-+# Double any \ or $.
- # By default was `s,x,x', remove it if useless.
--cat <<\_ACEOF >conftest.sed
--s/[\\$]/&&/g;s/;s,x,x,$//
--_ACEOF
--program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
--rm conftest.sed
-+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
- # expand $ac_aux_dir to an absolute path
- am_aux_dir=`cd $ac_aux_dir && pwd`
-@@ -1567,8 +2518,8 @@ if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
- else
- am_missing_run=
-- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
--echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
- fi
-
- if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-@@ -1608,10 +2559,10 @@ for ac_prog in gawk mawk nawk awk
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_AWK+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_AWK+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-@@ -1621,55 +2572,59 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- AWK=$ac_cv_prog_AWK
- if test -n "$AWK"; then
-- echo "$as_me:$LINENO: result: $AWK" >&5
--echo "${ECHO_T}$AWK" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-+$as_echo "$AWK" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- test -n "$AWK" && break
- done
-
--echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
--echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
--set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
--if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-+set x ${MAKE-make}
-+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- cat >conftest.make <<\_ACEOF
-+SHELL = /bin/sh
- all:
-- @echo 'ac_maketemp="$(MAKE)"'
-+ @echo '@@@%%%=$(MAKE)=@@@%%%'
- _ACEOF
--# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
--eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
--if test -n "$ac_maketemp"; then
-- eval ac_cv_prog_make_${ac_make}_set=yes
--else
-- eval ac_cv_prog_make_${ac_make}_set=no
--fi
-+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-+case `${MAKE-make} -f conftest.make 2>/dev/null` in
-+ *@@@%%%=?*=@@@%%%*)
-+ eval ac_cv_prog_make_${ac_make}_set=yes;;
-+ *)
-+ eval ac_cv_prog_make_${ac_make}_set=no;;
-+esac
- rm -f conftest.make
- fi
--if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-- echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6
-+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-+$as_echo "yes" >&6; }
- SET_MAKE=
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
-@@ -1685,9 +2640,7 @@ rmdir .tst 2>/dev/null
- # test to see if srcdir already configured
- if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
-- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
--echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
- fi
-
- # test whether we have cygpath
-@@ -1702,7 +2655,7 @@ fi
+@@ -2681,7 +2697,7 @@
# Define the identity of the package.
PACKAGE='refdb'
@@ -3029,8701 +67,3 @@
cat >>confdefs.h <<_ACEOF
-@@ -1740,10 +2693,10 @@ if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_STRIP+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-@@ -1753,35 +2706,37 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- STRIP=$ac_cv_prog_STRIP
- if test -n "$STRIP"; then
-- echo "$as_me:$LINENO: result: $STRIP" >&5
--echo "${ECHO_T}$STRIP" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-+$as_echo "$STRIP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
- set dummy strip; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-@@ -1791,28 +2746,38 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
- fi
- fi
- ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
- if test -n "$ac_ct_STRIP"; then
-- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
--echo "${ECHO_T}$ac_ct_STRIP" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-+$as_echo "$ac_ct_STRIP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-- STRIP=$ac_ct_STRIP
-+ if test "x$ac_ct_STRIP" = x; then
-+ STRIP=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ STRIP=$ac_ct_STRIP
-+ fi
- else
- STRIP="$ac_cv_prog_STRIP"
- fi
-@@ -1833,9 +2798,7 @@ am__tar='${AMTAR} chof - "$$tardir"'; am
-
-
-
--cat >>confdefs.h <<\_ACEOF
--#define _GNU_SOURCE 1
--_ACEOF
-+$as_echo "#define _GNU_SOURCE 1" >>confdefs.h
-
-
- ac_ext=c
-@@ -1846,10 +2809,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -1859,35 +2822,37 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-@@ -1897,39 +2862,50 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-+$as_echo "$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- else
- CC="$ac_cv_prog_CC"
- fi
-
- if test -z "$CC"; then
-- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -1939,77 +2915,37 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
--else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
--fi
--
--fi
--if test -z "$ac_cv_prog_CC"; then
-- ac_ct_CC=$CC
-- # Extract the first word of "cc", so it can be a program name with args.
--set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- if test -n "$ac_ct_CC"; then
-- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
--else
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-- ac_cv_prog_ac_ct_CC="cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-- break 2
-- fi
--done
--done
--
--fi
--fi
--ac_ct_CC=$ac_cv_prog_ac_ct_CC
--if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-- CC=$ac_ct_CC
--else
-- CC="$ac_cv_prog_CC"
--fi
-
-+ fi
- fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -2020,18 +2956,19 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
-@@ -2049,24 +2986,25 @@ fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- fi
- if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -2076,39 +3014,41 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- test -n "$CC" && break
- done
- fi
- if test -z "$CC"; then
- ac_ct_CC=$CC
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-@@ -2118,66 +3058,78 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-+$as_echo "$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- test -n "$ac_ct_CC" && break
- done
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- fi
-
- fi
-
-
--test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
--See \`config.log' for more details." >&5
--echo "$as_me: error: no acceptable C compiler found in \$PATH
--See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error $? "no acceptable C compiler found in \$PATH
-+See \`config.log' for more details" "$LINENO" 5 ; }
-
- # Provide some information about the compiler.
--echo "$as_me:$LINENO:" \
-- "checking for C compiler version" >&5
--ac_compiler=`set X $ac_compile; echo $2`
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-- (eval $ac_compiler --version </dev/null >&5) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-- (eval $ac_compiler -v </dev/null >&5) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-- (eval $ac_compiler -V </dev/null >&5) 2>&5
-+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-+set X $ac_compile
-+ac_compiler=$2
-+for ac_option in --version -v -V -qversion; do
-+ { { ac_try="$ac_compiler $ac_option >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }
-+ if test -s conftest.err; then
-+ sed '10a\
-+... rest of stderr output deleted ...
-+ 10q' conftest.err >conftest.er1
-+ cat conftest.er1 >&5
-+ fi
-+ rm -f conftest.er1 conftest.err
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+done
-
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
- int
-@@ -2189,112 +3141,108 @@ main ()
- }
- _ACEOF
- ac_clean_files_save=$ac_clean_files
--ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
--echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
--echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
--ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
--if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-- (eval $ac_link_default) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; then
-- # Find the output, starting from the most likely. This scheme is
--# not robust to junk in `.', hence go to wildcards (a.*) only as a last
--# resort.
--
--# Be careful to initialize this variable, since it used to be cached.
--# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
--ac_cv_exeext=
--# b.out is created by i960 compilers.
--for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-+$as_echo_n "checking whether the C compiler works... " >&6; }
-+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+
-+# The possible output files:
-+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-+
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+ esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { { ac_try="$ac_link_default"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_link_default") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }; then :
-+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile. We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
- do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-- ;;
-- conftest.$ac_ext )
-- # This is the source file.
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
-- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- # FIXME: I believe we export ac_cv_exeext for Libtool,
-- # but it would be cool to find out if it's true. Does anybody
-- # maintain Libtool? --akim.
-- export ac_cv_exeext
-+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+ then :; else
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ fi
-+ # We set ac_cv_exeext here because the later test for it is not
-+ # safe: cross compilers may not add the suffix if given an `-o'
-+ # argument, so we may need to know it at that point already.
-+ # Even if this section looks crufty: it has the advantage of
-+ # actually working.
- break;;
- * )
- break;;
- esac
- done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
- else
-- echo "$as_me: failed program was:" >&5
-+ ac_file=''
-+fi
-+if test -z "$ac_file"; then :
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+$as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
--See \`config.log' for more details." >&5
--echo "$as_me: error: C compiler cannot create executables
--See \`config.log' for more details." >&2;}
-- { (exit 77); exit 77; }; }
-+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error 77 "C compiler cannot create executables
-+See \`config.log' for more details" "$LINENO" 5 ; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-+$as_echo "yes" >&6; }
- fi
--
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-+$as_echo_n "checking for C compiler default output file name... " >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-+$as_echo "$ac_file" >&6; }
- ac_exeext=$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_file" >&5
--echo "${ECHO_T}$ac_file" >&6
--
--# Check the compiler produces executables we can run. If not, either
--# the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether the C compiler works" >&5
--echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
--# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
--# If not cross compiling, check that we can run a simple program.
--if test "$cross_compiling" != yes; then
-- if { ac_try='./$ac_file'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- cross_compiling=no
-- else
-- if test "$cross_compiling" = maybe; then
-- cross_compiling=yes
-- else
-- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
--If you meant to cross compile, use \`--host'.
--See \`config.log' for more details." >&5
--echo "$as_me: error: cannot run C compiled programs.
--If you meant to cross compile, use \`--host'.
--See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-- fi
-- fi
--fi
--echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6
-
--rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
--# Check the compiler produces executables we can run. If not, either
--# the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
--echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
--echo "$as_me:$LINENO: result: $cross_compiling" >&5
--echo "${ECHO_T}$cross_compiling" >&6
--
--echo "$as_me:$LINENO: checking for suffix of executables" >&5
--echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-+$as_echo_n "checking for suffix of executables... " >&6; }
-+if { { ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_link") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; then
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
- # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
- # work properly (i.e., refer to `conftest.exe'), while it won't with
-@@ -2302,38 +3250,90 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- export ac_cv_exeext
- break;;
- * ) break;;
- esac
- done
- else
-- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
--See \`config.log' for more details." >&5
--echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
--See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
--fi
--
--rm -f conftest$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
--echo "${ECHO_T}$ac_cv_exeext" >&6
-+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details" "$LINENO" 5 ; }
-+fi
-+rm -f conftest conftest$ac_cv_exeext
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-+$as_echo "$ac_cv_exeext" >&6; }
-
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
--echo "$as_me:$LINENO: checking for suffix of object files" >&5
--echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
--if test "${ac_cv_objext+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+#include <stdio.h>
-+int
-+main ()
-+{
-+FILE *f = fopen ("conftest.out", "w");
-+ return ferror (f) || fclose (f) != 0;
-+
-+ ;
-+ return 0;
-+}
- _ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ac_clean_files="$ac_clean_files conftest.out"
-+# Check that the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-+$as_echo_n "checking whether we are cross compiling... " >&6; }
-+if test "$cross_compiling" != yes; then
-+ { { ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if { ac_try='./conftest$ac_cv_exeext'
-+ { { case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }; }; then
-+ cross_compiling=no
-+ else
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error $? "cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details" "$LINENO" 5 ; }
-+ fi
-+ fi
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-+$as_echo "$cross_compiling" >&6; }
-+
-+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-+ac_clean_files=$ac_clean_files_save
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-+$as_echo_n "checking for suffix of object files... " >&6; }
-+if test "${ac_cv_objext+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
- int
-@@ -2345,45 +3345,46 @@ main ()
- }
- _ACEOF
- rm -f conftest.o conftest.obj
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; then
-- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+if { { ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+ (eval "$ac_compile") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }; then :
-+ for ac_file in conftest.o conftest.obj conftest.*; do
-+ test -f "$ac_file" || continue;
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
- done
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
--See \`config.log' for more details." >&5
--echo "$as_me: error: cannot compute suffix of object files: cannot compile
--See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error $? "cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details" "$LINENO" 5 ; }
- fi
--
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
--echo "${ECHO_T}$ac_cv_objext" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-+$as_echo "$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
--echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
--echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
--if test "${ac_cv_c_compiler_gnu+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
- int
-@@ -2397,55 +3398,34 @@ main ()
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_compiler_gnu=no
-+ ac_compiler_gnu=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
--echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
--GCC=`test $ac_compiler_gnu = yes && echo yes`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-+if test $ac_compiler_gnu = yes; then
-+ GCC=yes
-+else
-+ GCC=
-+fi
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
--CFLAGS="-g"
--echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
--echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
--if test "${ac_cv_prog_cc_g+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-+$as_echo_n "checking whether $CC accepts -g... " >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ ac_save_c_werror_flag=$ac_c_werror_flag
-+ ac_c_werror_flag=yes
-+ ac_cv_prog_cc_g=no
-+ CFLAGS="-g"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
- int
-@@ -2456,39 +3436,49 @@ main ()
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+ CFLAGS=""
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+
-+else
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+ CFLAGS="-g"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-
--ac_cv_prog_cc_g=no
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ ac_cv_prog_cc_g=yes
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_c_werror_flag=$ac_save_c_werror_flag
- fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-+$as_echo "$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-@@ -2504,18 +3494,14 @@ else
- CFLAGS=
- fi
- fi
--echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
--echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
--if test "${ac_cv_prog_cc_stdc+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- ac_cv_prog_cc_stdc=no
-+ ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdarg.h>
- #include <stdio.h>
-@@ -2543,12 +3529,17 @@ static char *f (char * (*g) (char **, in
- /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
-- as 'x'. The following induces an error, until -std1 is added to get
-+ as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
-- that's true only with -std1. */
-+ that's true only with -std. */
- int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+ inside strings and character constants. */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
- int test (int i, double x);
- struct s1 {int (*f) (int a);};
- struct s2 {int (*f) (double a);};
-@@ -2563,205 +3554,37 @@ return f (e, argv, 0) != argv[0] || f
- return 0;
- }
- _ACEOF
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX 10.20 and later -Ae
--# HP-UX older versions -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
- CC="$ac_save_CC $ac_arg"
-- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_prog_cc_stdc=$ac_arg
--break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
-+ if ac_fn_c_try_compile "$LINENO"; then :
-+ ac_cv_prog_cc_c89=$ac_arg
- fi
--rm -f conftest.err conftest.$ac_objext
-+rm -f core conftest.err conftest.$ac_objext
-+ test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
--rm -f conftest.$ac_ext conftest.$ac_objext
-+rm -f conftest.$ac_ext
- CC=$ac_save_CC
-
- fi
--
--case "x$ac_cv_prog_cc_stdc" in
-- x|xno)
-- echo "$as_me:$LINENO: result: none needed" >&5
--echo "${ECHO_T}none needed" >&6 ;;
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+ x)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-+$as_echo "none needed" >&6; } ;;
-+ xno)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-+$as_echo "unsupported" >&6; } ;;
- *)
-- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-- CC="$CC $ac_cv_prog_cc_stdc" ;;
-+ CC="$CC $ac_cv_prog_cc_c89"
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
- esac
-+if test "x$ac_cv_prog_cc_c89" != xno; then :
-
--# Some people use a C++ compiler to compile C. Since we use `exit',
--# in C++ we need to declare it. In case someone uses the same compiler
--# for both compiling C and C++ we need to have the C++ compiler decide
--# the declaration of exit, since it's the most demanding environment.
--cat >conftest.$ac_ext <<_ACEOF
--#ifndef __cplusplus
-- choke me
--#endif
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- for ac_declaration in \
-- '' \
-- 'extern "C" void std::exit (int) throw (); using std::exit;' \
-- 'extern "C" void std::exit (int); using std::exit;' \
-- 'extern "C" void exit (int) throw ();' \
-- 'extern "C" void exit (int);' \
-- 'void exit (int);'
--do
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--#include <stdlib.h>
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- :
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--continue
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--done
--rm -f conftest*
--if test -n "$ac_declaration"; then
-- echo '#ifdef __cplusplus' >>confdefs.h
-- echo $ac_declaration >>confdefs.h
-- echo '#endif' >>confdefs.h
- fi
-
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-@@ -2769,7 +3592,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- DEPDIR="${am__leading_dot}deps"
-
-- ac_config_commands="$ac_config_commands depfiles"
-+ac_config_commands="$ac_config_commands depfiles"
-
-
- am_make=${MAKE-make}
-@@ -2779,8 +3602,8 @@ am__doit:
- .PHONY: am__doit
- END
- # If we don't find an include directive, just comment out the code.
--echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
--echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-+$as_echo_n "checking for style of include used by $am_make... " >&6; }
- am__include="#"
- am__quote=
- _am_result=none
-@@ -2807,15 +3630,15 @@ if test "$am__include" = "#"; then
- fi
-
-
--echo "$as_me:$LINENO: result: $_am_result" >&5
--echo "${ECHO_T}$_am_result" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-+$as_echo "$_am_result" >&6; }
- rm -f confinc confmf
-
--# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
--if test "${enable_dependency_tracking+set}" = set; then
-- enableval="$enable_dependency_tracking"
-+# Check whether --enable-dependency-tracking was given.
-+if test "${enable_dependency_tracking+set}" = set; then :
-+ enableval=$enable_dependency_tracking;
-+fi
-
--fi;
- if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-@@ -2835,10 +3658,10 @@ fi
-
- depcc="$CC" am_compiler_list=
-
--echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
--echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
--if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-+$as_echo_n "checking dependency style of $depcc... " >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
-@@ -2925,8 +3748,8 @@ else
- fi
-
- fi
--echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
--echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
- CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-@@ -2951,140 +3774,140 @@ if test -n "$GCC"; then
- fi
-
-
--# Check whether --with-libdbi-lib or --without-libdbi-lib was given.
--if test "${with_libdbi_lib+set}" = set; then
-- withval="$with_libdbi_lib"
-- CFLAGS=$CFLAGS" -L$withval"
--fi;
--
--
--# Check whether --with-expat-lib or --without-expat-lib was given.
--if test "${with_expat_lib+set}" = set; then
-- withval="$with_expat_lib"
-- CFLAGS=$CFLAGS" -L$withval"
--fi;
--
--
--# Check whether --with-btparse-lib or --without-btparse-lib was given.
--if test "${with_btparse_lib+set}" = set; then
-- withval="$with_btparse_lib"
-- CFLAGS=$CFLAGS" -L$withval"
--fi;
--
--
--# Check whether --with-sgml-declaration or --without-sgml-declaration was given.
--if test "${with_sgml_declaration+set}" = set; then
-- withval="$with_sgml_declaration"
-- sgml_decl=$withval
-+# Check whether --with-libdbi-lib was given.
-+if test "${with_libdbi_lib+set}" = set; then :
-+ withval=$with_libdbi_lib; CFLAGS=$CFLAGS" -L$withval"
-+fi
-+
-+
-+
-+# Check whether --with-expat-lib was given.
-+if test "${with_expat_lib+set}" = set; then :
-+ withval=$with_expat_lib; CFLAGS=$CFLAGS" -L$withval"
-+fi
-+
-+
-+
-+# Check whether --with-btparse-lib was given.
-+if test "${with_btparse_lib+set}" = set; then :
-+ withval=$with_btparse_lib; CFLAGS=$CFLAGS" -L$withval"
-+fi
-+
-+
-+
-+# Check whether --with-sgml-declaration was given.
-+if test "${with_sgml_declaration+set}" = set; then :
-+ withval=$with_sgml_declaration; sgml_decl=$withval
- else
- sgml_decl="\$(pkgdatadir)/declarations/docbook.dcl"
--fi;
-+fi
-+
-
-
--# Check whether --with-xml-declaration or --without-xml-declaration was given.
--if test "${with_xml_declaration+set}" = set; then
-- withval="$with_xml_declaration"
-- xml_decl=$withval
-+# Check whether --with-xml-declaration was given.
-+if test "${with_xml_declaration+set}" = set; then :
-+ withval=$with_xml_declaration; xml_decl=$withval
- else
- xml_decl="\$(pkgdatadir)/declarations/xml.dcl"
--fi;
-+fi
-+
-
-
--# Check whether --with-docbook-xsl or --without-docbook-xsl was given.
--if test "${with_docbook_xsl+set}" = set; then
-- withval="$with_docbook_xsl"
-- docbk_xsl=$withval
-+# Check whether --with-docbook-xsl was given.
-+if test "${with_docbook_xsl+set}" = set; then :
-+ withval=$with_docbook_xsl; docbk_xsl=$withval
- else
- docbk_xsl="http://docbook.sourceforge.net/release/xsl/current"
--fi;
-+fi
-+
-
-
--# Check whether --with-docbook-xsl-ns or --without-docbook-xsl-ns was given.
--if test "${with_docbook_xsl_ns+set}" = set; then
-- withval="$with_docbook_xsl_ns"
-- docbk_xsl_ns=$withval
-+# Check whether --with-docbook-xsl-ns was given.
-+if test "${with_docbook_xsl_ns+set}" = set; then :
-+ withval=$with_docbook_xsl_ns; docbk_xsl_ns=$withval
- else
- docbk_xsl_ns="http://docbook.sourceforge.net/release/xsl-ns/current"
--fi;
-+fi
-+
-
-
--# Check whether --with-tei-xsl or --without-tei-xsl was given.
--if test "${with_tei_xsl+set}" = set; then
-- withval="$with_tei_xsl"
-- tei_xsl=$withval
-+# Check whether --with-tei-xsl was given.
-+if test "${with_tei_xsl+set}" = set; then :
-+ withval=$with_tei_xsl; tei_xsl=$withval
- else
- tei_xsl="http://www.tei-c.org/Stylesheets"
--fi;
-+fi
-+
-
-
--# Check whether --with-tei-xsl-ns or --without-tei-xsl-ns was given.
--if test "${with_tei_xsl_ns+set}" = set; then
-- withval="$with_tei_xsl_ns"
-- tei_xsl_ns=$withval
-+# Check whether --with-tei-xsl-ns was given.
-+if test "${with_tei_xsl_ns+set}" = set; then :
-+ withval=$with_tei_xsl_ns; tei_xsl_ns=$withval
- else
- tei_xsl_ns="http://www.tei-c.org/Stylesheets"
--fi;
-+fi
-+
-
-
--# Check whether --with-classpath_root or --without-classpath_root was given.
--if test "${with_classpath_root+set}" = set; then
-- withval="$with_classpath_root"
-- classpath_root=$withval
-+# Check whether --with-classpath_root was given.
-+if test "${with_classpath_root+set}" = set; then :
-+ withval=$with_classpath_root; classpath_root=$withval
- else
- classpath_root=""
--fi;
-+fi
-+
-
-
--# Check whether --with-var_dir or --without-var_dir was given.
--if test "${with_var_dir+set}" = set; then
-- withval="$with_var_dir"
-- var_dir=$withval
-+# Check whether --with-var_dir was given.
-+if test "${with_var_dir+set}" = set; then :
-+ withval=$with_var_dir; var_dir=$withval
- else
- var_dir="\$(localstatedir)/run"
--fi;
-+fi
-+
-
-
--# Check whether --with-log_dir or --without-log_dir was given.
--if test "${with_log_dir+set}" = set; then
-- withval="$with_log_dir"
-- log_dir=$withval
-+# Check whether --with-log_dir was given.
-+if test "${with_log_dir+set}" = set; then :
-+ withval=$with_log_dir; log_dir=$withval
- else
- log_dir="\$(localstatedir)/log"
--fi;
-+fi
-+
-
-
--# Check whether --with-main_db or --without-main_db was given.
--if test "${with_main_db+set}" = set; then
-- withval="$with_main_db"
-- main_db=$withval
-+# Check whether --with-main_db was given.
-+if test "${with_main_db+set}" = set; then :
-+ withval=$with_main_db; main_db=$withval
- else
- main_db="refdb"
--fi;
-+fi
-+
-
-
--# Check whether --with-db_dir or --without-db_dir was given.
--if test "${with_db_dir+set}" = set; then
-- withval="$with_db_dir"
-- db_dir=$withval
-+# Check whether --with-db_dir was given.
-+if test "${with_db_dir+set}" = set; then :
-+ withval=$with_db_dir; db_dir=$withval
- else
- db_dir="\$(localstatedir)/lib/refdb/db"
--fi;
-+fi
-+
-
-
--# Check whether --with-trang_jar or --without-trang_jar was given.
--if test "${with_trang_jar+set}" = set; then
-- withval="$with_trang_jar"
-- trang_cmd="java -jar "$withval
-+# Check whether --with-trang_jar was given.
-+if test "${with_trang_jar+set}" = set; then :
-+ withval=$with_trang_jar; trang_cmd="java -jar "$withval
- else
- trang_cmd="cp"
--fi;
-+fi
-+
-
- ac_docs="YES"
--# Check whether --enable-docs or --disable-docs was given.
--if test "${enable_docs+set}" = set; then
-- enableval="$enable_docs"
-- ac_docs="NO"
--fi;
-+# Check whether --enable-docs was given.
-+if test "${enable_docs+set}" = set; then :
-+ enableval=$enable_docs; ac_docs="NO"
-+fi
-+
-
- if test "$ac_docs" = "YES"; then
- docs_subdirs="doc"
-@@ -3093,11 +3916,11 @@ docs_subdirs=""
- fi
-
- ac_manpages="YES"
--# Check whether --enable-manpages or --disable-manpages was given.
--if test "${enable_manpages+set}" = set; then
-- enableval="$enable_manpages"
-- ac_manpages="NO"
--fi;
-+# Check whether --enable-manpages was given.
-+if test "${enable_manpages+set}" = set; then :
-+ enableval=$enable_manpages; ac_manpages="NO"
-+fi
-+
-
- if test "$ac_manpages" = "YES"; then
- man_subdirs="man"
-@@ -3106,11 +3929,11 @@ man_subdirs=""
- fi
-
- ac_server="YES"
--# Check whether --enable-server or --disable-server was given.
--if test "${enable_server+set}" = set; then
-- enableval="$enable_server"
-- ac_server="NO"
--fi;
-+# Check whether --enable-server was given.
-+if test "${enable_server+set}" = set; then :
-+ enableval=$enable_server; ac_server="NO"
-+fi
-+
-
- if test "$ac_server" = "YES"; then
- server_subdirs="etc scripts src phpweb sru"
-@@ -3131,11 +3954,11 @@ server8_mans=""
- fi
-
- ac_client="YES"
--# Check whether --enable-clients or --disable-clients was given.
--if test "${enable_clients+set}" = set; then
-- enableval="$enable_clients"
-- ac_client="NO"
--fi;
-+# Check whether --enable-clients was given.
-+if test "${enable_clients+set}" = set; then :
-+ enableval=$enable_clients; ac_client="NO"
-+fi
-+
-
- if test "$ac_client" = "YES" && test "$ac_server" = "YES"; then
- client_subdirs="declarations dsssl dtd examples styles xsl"
-@@ -3167,10 +3990,10 @@ for ac_prog in bash sh
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_myshell+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_myshell+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $myshell in
- [\\/]* | ?:[\\/]*)
-@@ -3182,28 +4005,29 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_myshell="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- myshell=$ac_cv_path_myshell
--
- if test -n "$myshell"; then
-- echo "$as_me:$LINENO: result: $myshell" >&5
--echo "${ECHO_T}$myshell" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $myshell" >&5
-+$as_echo "$myshell" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- test -n "$myshell" && break
- done
-
-@@ -3213,10 +4037,10 @@ for ac_prog in openjade jade
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_myjade+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_myjade+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $myjade in
- [\\/]* | ?:[\\/]*)
-@@ -3228,37 +4052,38 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_myjade="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- myjade=$ac_cv_path_myjade
--
- if test -n "$myjade"; then
-- echo "$as_me:$LINENO: result: $myjade" >&5
--echo "${ECHO_T}$myjade" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $myjade" >&5
-+$as_echo "$myjade" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- test -n "$myjade" && break
- done
-
- # Extract the first word of "perl", so it can be a program name with args.
- set dummy perl; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_myperl+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_myperl+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $myperl in
- [\\/]* | ?:[\\/]*)
-@@ -3270,34 +4095,35 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_myperl="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- myperl=$ac_cv_path_myperl
--
- if test -n "$myperl"; then
-- echo "$as_me:$LINENO: result: $myperl" >&5
--echo "${ECHO_T}$myperl" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $myperl" >&5
-+$as_echo "$myperl" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- # Extract the first word of "xsltproc", so it can be a program name with args.
- set dummy xsltproc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_myxsltproc+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_myxsltproc+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $myxsltproc in
- [\\/]* | ?:[\\/]*)
-@@ -3309,34 +4135,35 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_myxsltproc="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- myxsltproc=$ac_cv_path_myxsltproc
--
- if test -n "$myxsltproc"; then
-- echo "$as_me:$LINENO: result: $myxsltproc" >&5
--echo "${ECHO_T}$myxsltproc" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $myxsltproc" >&5
-+$as_echo "$myxsltproc" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- # Extract the first word of "xmlcatalog", so it can be a program name with args.
- set dummy xmlcatalog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_myxmlcatalog+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_myxmlcatalog+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $myxmlcatalog in
- [\\/]* | ?:[\\/]*)
-@@ -3348,37 +4175,38 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_myxmlcatalog="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- myxmlcatalog=$ac_cv_path_myxmlcatalog
--
- if test -n "$myxmlcatalog"; then
-- echo "$as_me:$LINENO: result: $myxmlcatalog" >&5
--echo "${ECHO_T}$myxmlcatalog" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $myxmlcatalog" >&5
-+$as_echo "$myxmlcatalog" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- fi
-
- if test "$ac_docs" = "YES"; then
- # Extract the first word of "dtdparse", so it can be a program name with args.
- set dummy dtdparse; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_mydtdparse+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_mydtdparse+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $mydtdparse in
- [\\/]* | ?:[\\/]*)
-@@ -3390,34 +4218,35 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_mydtdparse="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- mydtdparse=$ac_cv_path_mydtdparse
--
- if test -n "$mydtdparse"; then
-- echo "$as_me:$LINENO: result: $mydtdparse" >&5
--echo "${ECHO_T}$mydtdparse" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $mydtdparse" >&5
-+$as_echo "$mydtdparse" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- # Extract the first word of "dtdformat", so it can be a program name with args.
- set dummy dtdformat; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_mydtdformat+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_mydtdformat+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $mydtdformat in
- [\\/]* | ?:[\\/]*)
-@@ -3429,34 +4258,35 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_mydtdformat="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- mydtdformat=$ac_cv_path_mydtdformat
--
- if test -n "$mydtdformat"; then
-- echo "$as_me:$LINENO: result: $mydtdformat" >&5
--echo "${ECHO_T}$mydtdformat" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $mydtdformat" >&5
-+$as_echo "$mydtdformat" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- # Extract the first word of "sgrep", so it can be a program name with args.
- set dummy sgrep; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_mysgrep+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_mysgrep+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $mysgrep in
- [\\/]* | ?:[\\/]*)
-@@ -3468,34 +4298,35 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_mysgrep="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- mysgrep=$ac_cv_path_mysgrep
--
- if test -n "$mysgrep"; then
-- echo "$as_me:$LINENO: result: $mysgrep" >&5
--echo "${ECHO_T}$mysgrep" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $mysgrep" >&5
-+$as_echo "$mysgrep" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- # Extract the first word of "tidy", so it can be a program name with args.
- set dummy tidy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_mytidy+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_mytidy+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $mytidy in
- [\\/]* | ?:[\\/]*)
-@@ -3507,34 +4338,35 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_mytidy="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- mytidy=$ac_cv_path_mytidy
--
- if test -n "$mytidy"; then
-- echo "$as_me:$LINENO: result: $mytidy" >&5
--echo "${ECHO_T}$mytidy" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $mytidy" >&5
-+$as_echo "$mytidy" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- # Extract the first word of "batik-rasterizer", so it can be a program name with args.
- set dummy batik-rasterizer; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_mybatik+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_mybatik+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $mybatik in
- [\\/]* | ?:[\\/]*)
-@@ -3546,36 +4378,37 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_mybatik="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- mybatik=$ac_cv_path_mybatik
--
- if test -n "$mybatik"; then
-- echo "$as_me:$LINENO: result: $mybatik" >&5
--echo "${ECHO_T}$mybatik" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $mybatik" >&5
-+$as_echo "$mybatik" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-+
- fi
-
- # Extract the first word of "svnversion", so it can be a program name with args.
- set dummy svnversion; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_path_svnversioncommand+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_svnversioncommand+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- case $svnversioncommand in
- [\\/]* | ?:[\\/]*)
-@@ -3587,29 +4420,30 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_svnversioncommand="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
--done
-+ done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- svnversioncommand=$ac_cv_path_svnversioncommand
--
- if test -n "$svnversioncommand"; then
-- echo "$as_me:$LINENO: result: $svnversioncommand" >&5
--echo "${ECHO_T}$svnversioncommand" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $svnversioncommand" >&5
-+$as_echo "$svnversioncommand" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-+
- if test "X$svnversioncommand" = "X" || test `$svnversioncommand -n '.'` = "exported"; then
- mysvnversion="cat svn_dist_version"
- else
-@@ -3652,207 +4486,123 @@ fi
-
- if test "$ac_client" = "YES"; then
-
--echo "$as_me:$LINENO: checking for tputs in -ltermcap" >&5
--echo $ECHO_N "checking for tputs in -ltermcap... $ECHO_C" >&6
--if test "${ac_cv_lib_termcap_tputs+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tputs in -ltermcap" >&5
-+$as_echo_n "checking for tputs in -ltermcap... " >&6; }
-+if test "${ac_cv_lib_termcap_tputs+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-ltermcap $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char tputs ();
- int
- main ()
- {
--tputs ();
-+return tputs ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_termcap_tputs=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_termcap_tputs=no
-+ ac_cv_lib_termcap_tputs=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tputs" >&5
--echo "${ECHO_T}$ac_cv_lib_termcap_tputs" >&6
--if test $ac_cv_lib_termcap_tputs = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tputs" >&5
-+$as_echo "$ac_cv_lib_termcap_tputs" >&6; }
-+if test "x$ac_cv_lib_termcap_tputs" = x""yes; then :
-
- rltestlib="-ltermcap"
- else
-- echo "$as_me:$LINENO: checking for tputs in -lncurses" >&5
--echo $ECHO_N "checking for tputs in -lncurses... $ECHO_C" >&6
--if test "${ac_cv_lib_ncurses_tputs+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tputs in -lncurses" >&5
-+$as_echo_n "checking for tputs in -lncurses... " >&6; }
-+if test "${ac_cv_lib_ncurses_tputs+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lncurses $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char tputs ();
- int
- main ()
- {
--tputs ();
-+return tputs ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ncurses_tputs=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_ncurses_tputs=no
-+ ac_cv_lib_ncurses_tputs=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_tputs" >&5
--echo "${ECHO_T}$ac_cv_lib_ncurses_tputs" >&6
--if test $ac_cv_lib_ncurses_tputs = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tputs" >&5
-+$as_echo "$ac_cv_lib_ncurses_tputs" >&6; }
-+if test "x$ac_cv_lib_ncurses_tputs" = x""yes; then :
-
- rltestlib="-lncurses"
- else
-- echo "$as_me:$LINENO: checking for tputs in -lcurses" >&5
--echo $ECHO_N "checking for tputs in -lcurses... $ECHO_C" >&6
--if test "${ac_cv_lib_curses_tputs+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tputs in -lcurses" >&5
-+$as_echo_n "checking for tputs in -lcurses... " >&6; }
-+if test "${ac_cv_lib_curses_tputs+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lcurses $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char tputs ();
- int
- main ()
- {
--tputs ();
-+return tputs ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_curses_tputs=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_curses_tputs=no
-+ ac_cv_lib_curses_tputs=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_curses_tputs" >&5
--echo "${ECHO_T}$ac_cv_lib_curses_tputs" >&6
--if test $ac_cv_lib_curses_tputs = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_tputs" >&5
-+$as_echo "$ac_cv_lib_curses_tputs" >&6; }
-+if test "x$ac_cv_lib_curses_tputs" = x""yes; then :
-
- rltestlib="-lcurses"
- else
-@@ -3865,71 +4615,43 @@ fi
- fi
-
-
--echo "$as_me:$LINENO: checking for readline in -lreadline" >&5
--echo $ECHO_N "checking for readline in -lreadline... $ECHO_C" >&6
--if test "${ac_cv_lib_readline_readline+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for readline in -lreadline" >&5
-+$as_echo_n "checking for readline in -lreadline... " >&6; }
-+if test "${ac_cv_lib_readline_readline+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lreadline $rltestlib $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char readline ();
- int
- main ()
- {
--readline ();
-+return readline ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_readline_readline=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_readline_readline=no
-+ ac_cv_lib_readline_readline=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_readline_readline" >&5
--echo "${ECHO_T}$ac_cv_lib_readline_readline" >&6
--if test $ac_cv_lib_readline_readline = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_readline_readline" >&5
-+$as_echo "$ac_cv_lib_readline_readline" >&6; }
-+if test "x$ac_cv_lib_readline_readline" = x""yes; then :
-
- refdba_LDADD=$refdba_LDADD" -lreadline "$rltestlib
- refdbc_LDADD=$refdbc_LDADD" -lreadline "$rltestlib
-@@ -3940,17 +4662,13 @@ exit 1
- fi
-
-
--echo "$as_me:$LINENO: checking for libreadline version" >&5
--echo $ECHO_N "checking for libreadline version... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libreadline version" >&5
-+$as_echo_n "checking for libreadline version... " >&6; }
-
--if test "$cross_compiling" = yes; then
-+if test "$cross_compiling" = yes; then :
- ac_cv_lib_readline=old
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdio.h>
- #include <readline/readline.h>
-@@ -3960,40 +4678,23 @@ exit(0);
- }
-
- _ACEOF
--rm -f conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_lib_readline=old
- else
-- echo "$as_me: program exited with status $ac_status" >&5
--echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--( exit $ac_status )
--ac_cv_lib_readline=new
-+ ac_cv_lib_readline=new
- fi
--rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-+ conftest.$ac_objext conftest.beam conftest.$ac_ext
- fi
-
--echo "$as_me:$LINENO: result: $ac_cv_lib_readline" >&5
--echo "${ECHO_T}$ac_cv_lib_readline" >&6
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_readline" >&5
-+$as_echo "$ac_cv_lib_readline" >&6; }
- if test "$ac_cv_lib_readline" = "old" ; then
-- cat >>confdefs.h <<\_ACEOF
--#define READLINE41 1
--_ACEOF
-+ $as_echo "#define READLINE41 1" >>confdefs.h
-
- else
-- cat >>confdefs.h <<\_ACEOF
--#define READLINE42 1
--_ACEOF
-+ $as_echo "#define READLINE42 1" >>confdefs.h
-
- fi
- fi
-@@ -4016,13 +4717,13 @@ if test "$ac_server" = "YES"; then
- prefix="$acl_save_prefix"
-
-
--# Check whether --with-gnu-ld or --without-gnu-ld was given.
--if test "${with_gnu_ld+set}" = set; then
-- withval="$with_gnu_ld"
-- test "$withval" = no || with_gnu_ld=yes
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then :
-+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
- else
- with_gnu_ld=no
--fi;
-+fi
-+
- # Prepare PATH_SEPARATOR.
- # The user is always right.
- if test "${PATH_SEPARATOR+set}" != set; then
-@@ -4039,8 +4740,8 @@ fi
- ac_prog=ld
- if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
-- echo "$as_me:$LINENO: checking for ld used by GCC" >&5
--echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-+$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
-@@ -4069,14 +4770,14 @@ echo $ECHO_N "checking for ld used by GC
- ;;
- esac
- elif test "$with_gnu_ld" = yes; then
-- echo "$as_me:$LINENO: checking for GNU ld" >&5
--echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-+$as_echo_n "checking for GNU ld... " >&6; }
- else
-- echo "$as_me:$LINENO: checking for non-GNU ld" >&5
--echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-+$as_echo_n "checking for non-GNU ld... " >&6; }
- fi
--if test "${acl_cv_path_LD+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+if test "${acl_cv_path_LD+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-@@ -4103,19 +4804,17 @@ fi
-
- LD="$acl_cv_path_LD"
- if test -n "$LD"; then
-- echo "$as_me:$LINENO: result: $LD" >&5
--echo "${ECHO_T}$LD" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-+$as_echo "$LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
- fi
--test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
--echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-- { (exit 1); exit 1; }; }
--echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
--echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
--if test "${acl_cv_prog_gnu_ld+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
- case `$LD -v 2>&1 </dev/null` in
-@@ -4125,17 +4824,17 @@ case `$LD -v 2>&1 </dev/null` in
- acl_cv_prog_gnu_ld=no ;;
- esac
- fi
--echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5
--echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
- with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
-
-- echo "$as_me:$LINENO: checking for shared library run path origin" >&5
--echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6
--if test "${acl_cv_rpath+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-+$as_echo_n "checking for shared library run path origin... " >&6; }
-+if test "${acl_cv_rpath+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
-@@ -4145,8 +4844,8 @@ else
- acl_cv_rpath=done
-
- fi
--echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5
--echo "${ECHO_T}$acl_cv_rpath" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-+$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
-@@ -4154,13 +4853,13 @@ echo "${ECHO_T}$acl_cv_rpath" >&6
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
-- # Check whether --enable-rpath or --disable-rpath was given.
--if test "${enable_rpath+set}" = set; then
-- enableval="$enable_rpath"
-- :
-+ # Check whether --enable-rpath was given.
-+if test "${enable_rpath+set}" = set; then :
-+ enableval=$enable_rpath; :
- else
- enable_rpath=yes
--fi;
-+fi
-+
-
-
-
-@@ -4182,10 +4881,9 @@ fi;
- prefix="$acl_save_prefix"
-
-
--# Check whether --with-libiconv-prefix or --without-libiconv-prefix was given.
--if test "${with_libiconv_prefix+set}" = set; then
-- withval="$with_libiconv_prefix"
--
-+# Check whether --with-libiconv-prefix was given.
-+if test "${with_libiconv_prefix+set}" = set; then :
-+ withval=$with_libiconv_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
-@@ -4208,7 +4906,8 @@ if test "${with_libiconv_prefix+set}" =
- fi
- fi
-
--fi;
-+fi
-+
- LIBICONV=
- LTLIBICONV=
- INCICONV=
-@@ -4574,19 +5273,15 @@ fi;
- done
-
-
-- echo "$as_me:$LINENO: checking for iconv" >&5
--echo $ECHO_N "checking for iconv... $ECHO_C" >&6
--if test "${am_cv_func_iconv+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-+$as_echo_n "checking for iconv... " >&6; }
-+if test "${am_cv_func_iconv+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
- #include <iconv.h>
-@@ -4600,44 +5295,15 @@ iconv_t cd = iconv_open("","");
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
- #include <iconv.h>
-@@ -4651,55 +5317,28 @@ iconv_t cd = iconv_open("","");
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- fi
-
- fi
--echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5
--echo "${ECHO_T}$am_cv_func_iconv" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-+$as_echo "$am_cv_func_iconv" >&6; }
- if test "$am_cv_func_iconv" = yes; then
-
--cat >>confdefs.h <<\_ACEOF
--#define HAVE_ICONV 1
--_ACEOF
-+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
- fi
- if test "$am_cv_lib_iconv" = yes; then
-- echo "$as_me:$LINENO: checking how to link with libiconv" >&5
--echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6
-- echo "$as_me:$LINENO: result: $LIBICONV" >&5
--echo "${ECHO_T}$LIBICONV" >&6
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-+$as_echo_n "checking how to link with libiconv... " >&6; }
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-+$as_echo "$LIBICONV" >&6; }
- else
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
-@@ -4710,125 +5349,67 @@ echo "${ECHO_T}$LIBICONV" >&6
-
-
-
--echo "$as_me:$LINENO: checking for library containing dlopen" >&5
--echo $ECHO_N "checking for library containing dlopen... $ECHO_C" >&6
--if test "${ac_cv_search_dlopen+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
-+$as_echo_n "checking for library containing dlopen... " >&6; }
-+if test "${ac_cv_search_dlopen+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_func_search_save_LIBS="$LIBS"
- ac_cv_search_dlopen="no"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char dlopen ();
- int
- main ()
- {
--dlopen ();
-+return dlopen ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_dlopen="none required"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- test "$ac_cv_search_dlopen" = "no" && for i in dl; do
- LIBS="-l$i $ac_func_search_save_LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char dlopen ();
- int
- main ()
- {
--dlopen ();
-+return dlopen ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_dlopen="-l$i"
- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- done
- LIBS="$ac_func_search_save_LIBS"
- fi
--echo "$as_me:$LINENO: result: $ac_cv_search_dlopen" >&5
--echo "${ECHO_T}$ac_cv_search_dlopen" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
-+$as_echo "$ac_cv_search_dlopen" >&6; }
- if test "$ac_cv_search_dlopen" != "no"; then
- test "$ac_cv_search_dlopen" = "none required" || refdbd_LDADD="$refdbd_LDADD $ac_cv_search_dlopen"
-
-@@ -4837,125 +5418,67 @@ else :
- fi
-
-
--echo "$as_me:$LINENO: checking for library containing lt_dlopen" >&5
--echo $ECHO_N "checking for library containing lt_dlopen... $ECHO_C" >&6
--if test "${ac_cv_search_lt_dlopen+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing lt_dlopen" >&5
-+$as_echo_n "checking for library containing lt_dlopen... " >&6; }
-+if test "${ac_cv_search_lt_dlopen+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_func_search_save_LIBS="$LIBS"
- ac_cv_search_lt_dlopen="no"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char lt_dlopen ();
- int
- main ()
- {
--lt_dlopen ();
-+return lt_dlopen ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_lt_dlopen="none required"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- test "$ac_cv_search_lt_dlopen" = "no" && for i in ltdl; do
- LIBS="-l$i $ac_func_search_save_LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char lt_dlopen ();
- int
- main ()
- {
--lt_dlopen ();
-+return lt_dlopen ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_lt_dlopen="-l$i"
- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- done
- LIBS="$ac_func_search_save_LIBS"
- fi
--echo "$as_me:$LINENO: result: $ac_cv_search_lt_dlopen" >&5
--echo "${ECHO_T}$ac_cv_search_lt_dlopen" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_lt_dlopen" >&5
-+$as_echo "$ac_cv_search_lt_dlopen" >&6; }
- if test "$ac_cv_search_lt_dlopen" != "no"; then
- test "$ac_cv_search_lt_dlopen" = "none required" || refdbd_LDADD="$refdbd_LDADD $ac_cv_search_lt_dlopen"
-
-@@ -4963,71 +5486,43 @@ else :
-
- fi
-
--echo "$as_me:$LINENO: checking for dbi_initialize in -ldbi" >&5
--echo $ECHO_N "checking for dbi_initialize in -ldbi... $ECHO_C" >&6
--if test "${ac_cv_lib_dbi_dbi_initialize+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dbi_initialize in -ldbi" >&5
-+$as_echo_n "checking for dbi_initialize in -ldbi... " >&6; }
-+if test "${ac_cv_lib_dbi_dbi_initialize+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldbi $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char dbi_initialize ();
- int
- main ()
- {
--dbi_initialize ();
-+return dbi_initialize ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dbi_dbi_initialize=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_dbi_dbi_initialize=no
-+ ac_cv_lib_dbi_dbi_initialize=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_dbi_dbi_initialize" >&5
--echo "${ECHO_T}$ac_cv_lib_dbi_dbi_initialize" >&6
--if test $ac_cv_lib_dbi_dbi_initialize = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dbi_dbi_initialize" >&5
-+$as_echo "$ac_cv_lib_dbi_dbi_initialize" >&6; }
-+if test "x$ac_cv_lib_dbi_dbi_initialize" = x""yes; then :
-
- refdbd_LDADD=$refdbd_LDADD" -ldbi"
- else
-@@ -5038,125 +5533,67 @@ fi
-
-
-
--echo "$as_me:$LINENO: checking for library containing compress" >&5
--echo $ECHO_N "checking for library containing compress... $ECHO_C" >&6
--if test "${ac_cv_search_compress+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing compress" >&5
-+$as_echo_n "checking for library containing compress... " >&6; }
-+if test "${ac_cv_search_compress+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_func_search_save_LIBS="$LIBS"
- ac_cv_search_compress="no"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char compress ();
- int
- main ()
- {
--compress ();
-+return compress ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_compress="none required"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- test "$ac_cv_search_compress" = "no" && for i in z; do
- LIBS="-l$i $ac_func_search_save_LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char compress ();
- int
- main ()
- {
--compress ();
-+return compress ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_compress="-l$i"
- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- done
- LIBS="$ac_func_search_save_LIBS"
- fi
--echo "$as_me:$LINENO: result: $ac_cv_search_compress" >&5
--echo "${ECHO_T}$ac_cv_search_compress" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_compress" >&5
-+$as_echo "$ac_cv_search_compress" >&6; }
- if test "$ac_cv_search_compress" != "no"; then
- test "$ac_cv_search_compress" = "none required" || refdbd_LDADD="$refdbd_LDADD $ac_cv_search_compress"
-
-@@ -5165,326 +5602,158 @@ else :
- fi
-
- fi
--echo "$as_me:$LINENO: checking for library containing setsockopt" >&5
--echo $ECHO_N "checking for library containing setsockopt... $ECHO_C" >&6
--if test "${ac_cv_search_setsockopt+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing setsockopt" >&5
-+$as_echo_n "checking for library containing setsockopt... " >&6; }
-+if test "${ac_cv_search_setsockopt+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_func_search_save_LIBS=$LIBS
--ac_cv_search_setsockopt=no
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char setsockopt ();
- int
- main ()
- {
--setsockopt ();
-+return setsockopt ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_search_setsockopt="none required"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
--if test "$ac_cv_search_setsockopt" = no; then
-- for ac_lib in socket; do
-+for ac_lib in '' socket; do
-+ if test -z "$ac_lib"; then
-+ ac_res="none required"
-+ else
-+ ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
-+ fi
-+ if ac_fn_c_try_link "$LINENO"; then :
-+ ac_cv_search_setsockopt=$ac_res
-+fi
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext
-+ if test "${ac_cv_search_setsockopt+set}" = set; then :
-+ break
-+fi
-+done
-+if test "${ac_cv_search_setsockopt+set}" = set; then :
-
--/* Override any gcc2 internal prototype to avoid an error. */
--#ifdef __cplusplus
--extern "C"
--#endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char setsockopt ();
--int
--main ()
--{
--setsockopt ();
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_search_setsockopt="-l$ac_lib"
--break
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-- done
-+ ac_cv_search_setsockopt=no
- fi
-+rm conftest.$ac_ext
- LIBS=$ac_func_search_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_search_setsockopt" >&5
--echo "${ECHO_T}$ac_cv_search_setsockopt" >&6
--if test "$ac_cv_search_setsockopt" != no; then
-- test "$ac_cv_search_setsockopt" = "none required" || LIBS="$ac_cv_search_setsockopt $LIBS"
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_setsockopt" >&5
-+$as_echo "$ac_cv_search_setsockopt" >&6; }
-+ac_res=$ac_cv_search_setsockopt
-+if test "$ac_res" != no; then :
-+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
- fi
-
-
--echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5
--echo $ECHO_N "checking for library containing gethostbyname... $ECHO_C" >&6
--if test "${ac_cv_search_gethostbyname+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
-+$as_echo_n "checking for library containing gethostbyname... " >&6; }
-+if test "${ac_cv_search_gethostbyname+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_func_search_save_LIBS=$LIBS
--ac_cv_search_gethostbyname=no
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char gethostbyname ();
- int
- main ()
- {
--gethostbyname ();
-+return gethostbyname ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_search_gethostbyname="none required"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
--if test "$ac_cv_search_gethostbyname" = no; then
-- for ac_lib in nsl; do
-+for ac_lib in '' nsl; do
-+ if test -z "$ac_lib"; then
-+ ac_res="none required"
-+ else
-+ ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
-+ fi
-+ if ac_fn_c_try_link "$LINENO"; then :
-+ ac_cv_search_gethostbyname=$ac_res
-+fi
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext
-+ if test "${ac_cv_search_gethostbyname+set}" = set; then :
-+ break
-+fi
-+done
-+if test "${ac_cv_search_gethostbyname+set}" = set; then :
-
--/* Override any gcc2 internal prototype to avoid an error. */
--#ifdef __cplusplus
--extern "C"
--#endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char gethostbyname ();
--int
--main ()
--{
--gethostbyname ();
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_search_gethostbyname="-l$ac_lib"
--break
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-- done
-+ ac_cv_search_gethostbyname=no
- fi
-+rm conftest.$ac_ext
- LIBS=$ac_func_search_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5
--echo "${ECHO_T}$ac_cv_search_gethostbyname" >&6
--if test "$ac_cv_search_gethostbyname" != no; then
-- test "$ac_cv_search_gethostbyname" = "none required" || LIBS="$ac_cv_search_gethostbyname $LIBS"
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5
-+$as_echo "$ac_cv_search_gethostbyname" >&6; }
-+ac_res=$ac_cv_search_gethostbyname
-+if test "$ac_res" != no; then :
-+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
- fi
-
-
- if test "$ac_server" = "YES"; then
--echo "$as_me:$LINENO: checking for XML_ParserCreate in -lexpat" >&5
--echo $ECHO_N "checking for XML_ParserCreate in -lexpat... $ECHO_C" >&6
--if test "${ac_cv_lib_expat_XML_ParserCreate+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML_ParserCreate in -lexpat" >&5
-+$as_echo_n "checking for XML_ParserCreate in -lexpat... " >&6; }
-+if test "${ac_cv_lib_expat_XML_ParserCreate+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lexpat $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char XML_ParserCreate ();
- int
- main ()
- {
--XML_ParserCreate ();
-+return XML_ParserCreate ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_expat_XML_ParserCreate=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_expat_XML_ParserCreate=no
-+ ac_cv_lib_expat_XML_ParserCreate=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_expat_XML_ParserCreate" >&5
--echo "${ECHO_T}$ac_cv_lib_expat_XML_ParserCreate" >&6
--if test $ac_cv_lib_expat_XML_ParserCreate = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_expat_XML_ParserCreate" >&5
-+$as_echo "$ac_cv_lib_expat_XML_ParserCreate" >&6; }
-+if test "x$ac_cv_lib_expat_XML_ParserCreate" = x""yes; then :
-
- refdbd_LDADD=$refdbd_LDADD" -lexpat"
- else
-@@ -5496,71 +5765,43 @@ fi
- fi
-
- if test "$ac_client" = "YES"; then
--echo "$as_me:$LINENO: checking for bt_initialize in -lbtparse" >&5
--echo $ECHO_N "checking for bt_initialize in -lbtparse... $ECHO_C" >&6
--if test "${ac_cv_lib_btparse_bt_initialize+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bt_initialize in -lbtparse" >&5
-+$as_echo_n "checking for bt_initialize in -lbtparse... " >&6; }
-+if test "${ac_cv_lib_btparse_bt_initialize+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lbtparse $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char bt_initialize ();
- int
- main ()
- {
--bt_initialize ();
-+return bt_initialize ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_btparse_bt_initialize=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_btparse_bt_initialize=no
-+ ac_cv_lib_btparse_bt_initialize=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_btparse_bt_initialize" >&5
--echo "${ECHO_T}$ac_cv_lib_btparse_bt_initialize" >&6
--if test $ac_cv_lib_btparse_bt_initialize = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_btparse_bt_initialize" >&5
-+$as_echo "$ac_cv_lib_btparse_bt_initialize" >&6; }
-+if test "x$ac_cv_lib_btparse_bt_initialize" = x""yes; then :
-
- bib2ris_LDADD=$bib2ris_LDADD" -lbtparse"
- BIB2RIS="bib2ris\$(EXEEXT)"
-@@ -5576,15 +5817,15 @@ ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
--echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
--echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-+$as_echo_n "checking how to run the C preprocessor... " >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
- fi
- if test -z "$CPP"; then
-- if test "${ac_cv_prog_CPP+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ if test "${ac_cv_prog_CPP+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-@@ -5598,11 +5839,7 @@ do
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #ifdef __STDC__
- # include <limits.h>
-@@ -5611,78 +5848,34 @@ cat >>conftest.$ac_ext <<_ACEOF
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-- :
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_cpp "$LINENO"; then :
-
-+else
- # Broken: fails on valid input.
- continue
- fi
--rm -f conftest.err conftest.$ac_ext
-+rm -f conftest.err conftest.i conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
- continue
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- # Passes both tests.
- ac_preproc_ok=:
- break
- fi
--rm -f conftest.err conftest.$ac_ext
-+rm -f conftest.err conftest.i conftest.$ac_ext
-
- done
- # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
--rm -f conftest.err conftest.$ac_ext
--if $ac_preproc_ok; then
-+rm -f conftest.i conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then :
- break
- fi
-
-@@ -5694,8 +5887,8 @@ fi
- else
- ac_cv_prog_CPP=$CPP
- fi
--echo "$as_me:$LINENO: result: $CPP" >&5
--echo "${ECHO_T}$CPP" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-+$as_echo "$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-@@ -5705,11 +5898,7 @@ do
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #ifdef __STDC__
- # include <limits.h>
-@@ -5718,85 +5907,40 @@ cat >>conftest.$ac_ext <<_ACEOF
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-- :
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_cpp "$LINENO"; then :
-
-+else
- # Broken: fails on valid input.
- continue
- fi
--rm -f conftest.err conftest.$ac_ext
-+rm -f conftest.err conftest.i conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
- continue
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
- # Passes both tests.
- ac_preproc_ok=:
- break
- fi
--rm -f conftest.err conftest.$ac_ext
-+rm -f conftest.err conftest.i conftest.$ac_ext
-
- done
- # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
--rm -f conftest.err conftest.$ac_ext
--if $ac_preproc_ok; then
-- :
-+rm -f conftest.i conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then :
-+
- else
-- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
--See \`config.log' for more details." >&5
--echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
--See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details" "$LINENO" 5 ; }
- fi
-
- ac_ext=c
-@@ -5806,31 +5950,142 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
--echo "$as_me:$LINENO: checking for egrep" >&5
--echo $ECHO_N "checking for egrep... $ECHO_C" >&6
--if test "${ac_cv_prog_egrep+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi
--fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
--echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-- EGREP=$ac_cv_prog_egrep
--
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -z "$GREP"; then
-+ ac_path_GREP_found=false
-+ # Loop through the user's path and test for each of PROGNAME-LIST
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in grep ggrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+# Check for GNU ac_path_GREP and select it if it is found.
-+ # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+ ac_count=0
-+ $as_echo_n 0123456789 >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ $as_echo 'GREP' >> "conftest.nl"
-+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ as_fn_arith $ac_count + 1 && ac_count=$as_val
-+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_GREP="$ac_path_GREP"
-+ ac_path_GREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-
--echo "$as_me:$LINENO: checking for ANSI C header files" >&5
--echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
--if test "${ac_cv_header_stdc+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $ac_path_GREP_found && break 3
-+ done
-+ done
-+ done
-+IFS=$as_save_IFS
-+ if test -z "$ac_cv_path_GREP"; then
-+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-+ fi
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ ac_cv_path_GREP=$GREP
-+fi
-+
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-+$as_echo "$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-+$as_echo_n "checking for egrep... " >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+ then ac_cv_path_EGREP="$GREP -E"
-+ else
-+ if test -z "$EGREP"; then
-+ ac_path_EGREP_found=false
-+ # Loop through the user's path and test for each of PROGNAME-LIST
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in egrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+# Check for GNU ac_path_EGREP and select it if it is found.
-+ # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+ ac_count=0
-+ $as_echo_n 0123456789 >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ $as_echo 'EGREP' >> "conftest.nl"
-+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ as_fn_arith $ac_count + 1 && ac_count=$as_val
-+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_EGREP="$ac_path_EGREP"
-+ ac_path_EGREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+ $ac_path_EGREP_found && break 3
-+ done
-+ done
-+ done
-+IFS=$as_save_IFS
-+ if test -z "$ac_cv_path_EGREP"; then
-+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-+ fi
-+else
-+ ac_cv_path_EGREP=$EGREP
-+fi
-+
-+ fi
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-+$as_echo "$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-+$as_echo_n "checking for ANSI C header files... " >&6; }
-+if test "${ac_cv_header_stdc+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
- #include <stdarg.h>
-@@ -5845,51 +6100,23 @@ main ()
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_header_stdc=no
-+ ac_cv_header_stdc=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <string.h>
-
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- $EGREP "memchr" >/dev/null 2>&1; then
-- :
-+ $EGREP "memchr" >/dev/null 2>&1; then :
-+
- else
- ac_cv_header_stdc=no
- fi
-@@ -5899,18 +6126,14 @@ fi
-
- if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
-
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- $EGREP "free" >/dev/null 2>&1; then
-- :
-+ $EGREP "free" >/dev/null 2>&1; then :
-+
- else
- ac_cv_header_stdc=no
- fi
-@@ -5920,16 +6143,13 @@ fi
-
- if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-- if test "$cross_compiling" = yes; then
-+ if test "$cross_compiling" = yes; then :
- :
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <ctype.h>
-+#include <stdlib.h>
- #if ((' ' & 0x0FF) == 0x020)
- # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
- # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-@@ -5949,109 +6169,39 @@ main ()
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
-- exit(2);
-- exit (0);
-+ return 2;
-+ return 0;
- }
- _ACEOF
--rm -f conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- :
--else
-- echo "$as_me: program exited with status $ac_status" >&5
--echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_run "$LINENO"; then :
-
--( exit $ac_status )
--ac_cv_header_stdc=no
-+else
-+ ac_cv_header_stdc=no
- fi
--rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-+ conftest.$ac_objext conftest.beam conftest.$ac_ext
- fi
-+
- fi
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
--echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-+$as_echo "$ac_cv_header_stdc" >&6; }
- if test $ac_cv_header_stdc = yes; then
-
--cat >>confdefs.h <<\_ACEOF
--#define STDC_HEADERS 1
--_ACEOF
-+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
- fi
-
- # On IRIX 5.3, sys/types and inttypes.h are conflicting.
--
--
--
--
--
--
--
--
--
- for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
--do
--as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $ac_header" >&5
--echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
--if eval "test \"\${$as_ac_Header+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_includes_default
--
--#include <$ac_header>
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- eval "$as_ac_Header=yes"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--eval "$as_ac_Header=no"
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
--if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+do :
-+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-+"
-+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
--#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
- _ACEOF
-
- fi
-@@ -6059,63 +6209,8 @@ fi
- done
-
-
--echo "$as_me:$LINENO: checking for socklen_t" >&5
--echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6
--if test "${ac_cv_type_socklen_t+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_includes_default
--int
--main ()
--{
--if ((socklen_t *) 0)
-- return 0;
--if (sizeof (socklen_t))
-- return 0;
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_type_socklen_t=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_type_socklen_t=no
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5
--echo "${ECHO_T}$ac_cv_type_socklen_t" >&6
--if test $ac_cv_type_socklen_t = yes; then
-+ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" "$ac_includes_default"
-+if test "x$ac_cv_type_socklen_t" = x""yes; then :
-
- cat >>confdefs.h <<_ACEOF
- #define HAVE_SOCKLEN_T 1
-@@ -6174,16 +6269,12 @@ esac
-
-
-
--echo "$as_me:$LINENO: checking for ANSI C header files" >&5
--echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
--if test "${ac_cv_header_stdc+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-+$as_echo_n "checking for ANSI C header files... " >&6; }
-+if test "${ac_cv_header_stdc+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
- #include <stdarg.h>
-@@ -6198,51 +6289,23 @@ main ()
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_header_stdc=no
-+ ac_cv_header_stdc=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <string.h>
-
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- $EGREP "memchr" >/dev/null 2>&1; then
-- :
-+ $EGREP "memchr" >/dev/null 2>&1; then :
-+
- else
- ac_cv_header_stdc=no
- fi
-@@ -6252,18 +6315,14 @@ fi
-
- if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
-
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- $EGREP "free" >/dev/null 2>&1; then
-- :
-+ $EGREP "free" >/dev/null 2>&1; then :
-+
- else
- ac_cv_header_stdc=no
- fi
-@@ -6273,16 +6332,13 @@ fi
-
- if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-- if test "$cross_compiling" = yes; then
-+ if test "$cross_compiling" = yes; then :
- :
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <ctype.h>
-+#include <stdlib.h>
- #if ((' ' & 0x0FF) == 0x020)
- # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
- # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-@@ -6302,194 +6358,36 @@ main ()
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
-- exit(2);
-- exit (0);
-+ return 2;
-+ return 0;
- }
- _ACEOF
--rm -f conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- :
--else
-- echo "$as_me: program exited with status $ac_status" >&5
--echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_run "$LINENO"; then :
-
--( exit $ac_status )
--ac_cv_header_stdc=no
-+else
-+ ac_cv_header_stdc=no
- fi
--rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-+ conftest.$ac_objext conftest.beam conftest.$ac_ext
- fi
-+
- fi
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
--echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-+$as_echo "$ac_cv_header_stdc" >&6; }
- if test $ac_cv_header_stdc = yes; then
-
--cat >>confdefs.h <<\_ACEOF
--#define STDC_HEADERS 1
--_ACEOF
-+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
- fi
-
--
--
--
--
--
--
--
- for ac_header in fcntl.h limits.h sys/file.h sys/time.h sys/ioctl.h syslog.h unistd.h
--do
--as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
--if eval "test \"\${$as_ac_Header+set}\" = set"; then
-- echo "$as_me:$LINENO: checking for $ac_header" >&5
--echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
--if eval "test \"\${$as_ac_Header+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
--else
-- # Is the header compilable?
--echo "$as_me:$LINENO: checking $ac_header usability" >&5
--echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_includes_default
--#include <$ac_header>
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_header_compiler=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_header_compiler=no
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
--echo "${ECHO_T}$ac_header_compiler" >&6
--
--# Is the header present?
--echo "$as_me:$LINENO: checking $ac_header presence" >&5
--echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--#include <$ac_header>
--_ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-- ac_header_preproc=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
-- ac_header_preproc=no
--fi
--rm -f conftest.err conftest.$ac_ext
--echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
--echo "${ECHO_T}$ac_header_preproc" >&6
--
--# So? What about this header?
--case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-- yes:no: )
-- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
--echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
--echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-- ac_header_preproc=yes
-- ;;
-- no:yes:* )
-- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
--echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
--echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
--echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
--echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
--echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
--echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-- (
-- cat <<\_ASBOX
--## -------------------------------- ##
--## Report this to the refdb lists. ##
--## -------------------------------- ##
--_ASBOX
-- ) |
-- sed "s/^/$as_me: WARNING: /" >&2
-- ;;
--esac
--echo "$as_me:$LINENO: checking for $ac_header" >&5
--echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
--if eval "test \"\${$as_ac_Header+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- eval "$as_ac_Header=\$ac_header_preproc"
--fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
--
--fi
--if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+do :
-+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
--#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
- _ACEOF
-
- fi
-@@ -6497,16 +6395,12 @@ fi
- done
-
-
--echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
--echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
--if test "${ac_cv_c_const+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
-+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-+if test "${ac_cv_c_const+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
- int
-@@ -6516,10 +6410,10 @@ main ()
- #ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
-- const charset x;
-+ const charset cs;
- /* SunOS 4.1.1 cc rejects this. */
-- char const *const *ccp;
-- char **p;
-+ char const *const *pcpcc;
-+ char **ppc;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
-@@ -6528,16 +6422,17 @@ main ()
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
-- ccp = &g + (g ? g-g : 0);
-+ pcpcc = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
-- ++ccp;
-- p = (char**) ccp;
-- ccp = (char const *const *) p;
-+ ++pcpcc;
-+ ppc = (char**) pcpcc;
-+ pcpcc = (char const *const *) ppc;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-+ if (s) return 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
-@@ -6556,112 +6451,33 @@ main ()
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-+ if (!foo) return 0;
- }
-+ return !cs[0] && !zero.x;
- #endif
-
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_const=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_c_const=no
-+ ac_cv_c_const=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
--echo "${ECHO_T}$ac_cv_c_const" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
-+$as_echo "$ac_cv_c_const" >&6; }
- if test $ac_cv_c_const = no; then
-
--cat >>confdefs.h <<\_ACEOF
--#define const
--_ACEOF
-+$as_echo "#define const /**/" >>confdefs.h
-
- fi
-
--echo "$as_me:$LINENO: checking for pid_t" >&5
--echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
--if test "${ac_cv_type_pid_t+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_includes_default
--int
--main ()
--{
--if ((pid_t *) 0)
-- return 0;
--if (sizeof (pid_t))
-- return 0;
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_type_pid_t=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
-+if test "x$ac_cv_type_pid_t" = x""yes; then :
-
--ac_cv_type_pid_t=no
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
--echo "${ECHO_T}$ac_cv_type_pid_t" >&6
--if test $ac_cv_type_pid_t = yes; then
-- :
- else
-
- cat >>confdefs.h <<_ACEOF
-@@ -6670,82 +6486,23 @@ _ACEOF
-
- fi
-
--echo "$as_me:$LINENO: checking for size_t" >&5
--echo $ECHO_N "checking for size_t... $ECHO_C" >&6
--if test "${ac_cv_type_size_t+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_includes_default
--int
--main ()
--{
--if ((size_t *) 0)
-- return 0;
--if (sizeof (size_t))
-- return 0;
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_type_size_t=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
-+if test "x$ac_cv_type_size_t" = x""yes; then :
-
--ac_cv_type_size_t=no
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
--echo "${ECHO_T}$ac_cv_type_size_t" >&6
--if test $ac_cv_type_size_t = yes; then
-- :
- else
-
- cat >>confdefs.h <<_ACEOF
--#define size_t unsigned
-+#define size_t unsigned int
- _ACEOF
-
- fi
-
--echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
--echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
--if test "${ac_cv_header_time+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
-+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
-+if test "${ac_cv_header_time+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <sys/types.h>
- #include <sys/time.h>
-@@ -6760,57 +6517,27 @@ return 0;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_time=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_header_time=no
-+ ac_cv_header_time=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
--echo "${ECHO_T}$ac_cv_header_time" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
-+$as_echo "$ac_cv_header_time" >&6; }
- if test $ac_cv_header_time = yes; then
-
--cat >>confdefs.h <<\_ACEOF
--#define TIME_WITH_SYS_TIME 1
--_ACEOF
-+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
-
- fi
-
--echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
--echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6
--if test "${ac_cv_struct_tm+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
-+$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
-+if test "${ac_cv_struct_tm+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <sys/types.h>
- #include <time.h>
-@@ -6818,291 +6545,110 @@ cat >>conftest.$ac_ext <<_ACEOF
- int
- main ()
- {
--struct tm *tp; tp->tm_sec;
-+struct tm tm;
-+ int *p = &tm.tm_sec;
-+ return !p;
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_struct_tm=time.h
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_struct_tm=sys/time.h
-+ ac_cv_struct_tm=sys/time.h
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
--echo "${ECHO_T}$ac_cv_struct_tm" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5
-+$as_echo "$ac_cv_struct_tm" >&6; }
- if test $ac_cv_struct_tm = sys/time.h; then
-
--cat >>confdefs.h <<\_ACEOF
--#define TM_IN_SYS_TIME 1
--_ACEOF
-+$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h
-
- fi
-
-
--echo "$as_me:$LINENO: checking return type of signal handlers" >&5
--echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6
--if test "${ac_cv_type_signal+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
-+$as_echo_n "checking return type of signal handlers... " >&6; }
-+if test "${ac_cv_type_signal+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <sys/types.h>
- #include <signal.h>
--#ifdef signal
--# undef signal
--#endif
--#ifdef __cplusplus
--extern "C" void (*signal (int, void (*)(int)))(int);
--#else
--void (*signal ()) ();
--#endif
-
- int
- main ()
- {
--int i;
-+return *(signal (0, 0)) (0) == 1;
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_type_signal=void
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ ac_cv_type_signal=int
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_type_signal=int
-+ ac_cv_type_signal=void
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
--echo "${ECHO_T}$ac_cv_type_signal" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
-+$as_echo "$ac_cv_type_signal" >&6; }
-
- cat >>confdefs.h <<_ACEOF
- #define RETSIGTYPE $ac_cv_type_signal
- _ACEOF
-
-
--
- for ac_func in strftime
--do
--as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $ac_func" >&5
--echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
--if eval "test \"\${$as_ac_var+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-- For example, HP-UX 11i <limits.h> declares gettimeofday. */
--#define $ac_func innocuous_$ac_func
--
--/* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func (); below.
-- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-- <limits.h> exists even on freestanding compilers. */
--
--#ifdef __STDC__
--# include <limits.h>
--#else
--# include <assert.h>
--#endif
--
--#undef $ac_func
--
--/* Override any gcc2 internal prototype to avoid an error. */
--#ifdef __cplusplus
--extern "C"
--{
--#endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func ();
--/* The GNU C library defines this for functions which it implements
-- to always fail with ENOSYS. Some functions are actually named
-- something starting with __ and the normal name is an alias. */
--#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
--choke me
--#else
--char (*f) () = $ac_func;
--#endif
--#ifdef __cplusplus
--}
--#endif
--
--int
--main ()
--{
--return f != $ac_func;
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- eval "$as_ac_var=yes"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--eval "$as_ac_var=no"
--fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
--fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
--if test `eval echo '${'$as_ac_var'}'` = yes; then
-+do :
-+ ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime"
-+if test "x$ac_cv_func_strftime" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
--#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+#define HAVE_STRFTIME 1
- _ACEOF
-
- else
- # strftime is in -lintl on SCO UNIX.
--echo "$as_me:$LINENO: checking for strftime in -lintl" >&5
--echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6
--if test "${ac_cv_lib_intl_strftime+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5
-+$as_echo_n "checking for strftime in -lintl... " >&6; }
-+if test "${ac_cv_lib_intl_strftime+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lintl $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char strftime ();
- int
- main ()
- {
--strftime ();
-+return strftime ();
- ;
- return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_intl_strftime=yes
- else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--ac_cv_lib_intl_strftime=no
-+ ac_cv_lib_intl_strftime=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
-+rm -f core conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5
--echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6
--if test $ac_cv_lib_intl_strftime = yes; then
-- cat >>confdefs.h <<\_ACEOF
--#define HAVE_STRFTIME 1
--_ACEOF
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5
-+$as_echo "$ac_cv_lib_intl_strftime" >&6; }
-+if test "x$ac_cv_lib_intl_strftime" = x""yes; then :
-+ $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h
-
- LIBS="-lintl $LIBS"
- fi
-@@ -7111,17 +6657,13 @@ fi
- done
-
-
--echo "$as_me:$LINENO: checking for working mkfifo" >&5
--echo $ECHO_N "checking for working mkfifo... $ECHO_C" >&6
--if test "$cross_compiling" = yes; then
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mkfifo" >&5
-+$as_echo_n "checking for working mkfifo... " >&6; }
-+if test "$cross_compiling" = yes; then :
- ac_cv_func_mkfifo=no
-
- else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- #include <stdlib.h>
- #include <sys/types.h>
-@@ -7138,140 +6680,29 @@ exit (error);
- }
-
- _ACEOF
--rm -f conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_func_mkfifo=yes
- else
-- echo "$as_me: program exited with status $ac_status" >&5
--echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--( exit $ac_status )
--ac_cv_func_mkfifo=no
-+ ac_cv_func_mkfifo=no
- fi
--rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-+ conftest.$ac_objext conftest.beam conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_func_mkfifo" >&5
--echo "${ECHO_T}$ac_cv_func_mkfifo" >&6
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mkfifo" >&5
-+$as_echo "$ac_cv_func_mkfifo" >&6; }
- if test $ac_cv_func_mkfifo = yes ; then
-- cat >>confdefs.h <<\_ACEOF
--#define HAVE_MKFIFO 1
--_ACEOF
-+ $as_echo "#define HAVE_MKFIFO 1" >>confdefs.h
-
- fi
-
--
--
--
--
--
--
--
- for ac_func in gethostname select socket strcspn strstr strtoll atoll
--do
--as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $ac_func" >&5
--echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
--if eval "test \"\${$as_ac_var+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-- For example, HP-UX 11i <limits.h> declares gettimeofday. */
--#define $ac_func innocuous_$ac_func
--
--/* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func (); below.
-- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-- <limits.h> exists even on freestanding compilers. */
--
--#ifdef __STDC__
--# include <limits.h>
--#else
--# include <assert.h>
--#endif
--
--#undef $ac_func
--
--/* Override any gcc2 internal prototype to avoid an error. */
--#ifdef __cplusplus
--extern "C"
--{
--#endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func ();
--/* The GNU C library defines this for functions which it implements
-- to always fail with ENOSYS. Some functions are actually named
-- something starting with __ and the normal name is an alias. */
--#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
--choke me
--#else
--char (*f) () = $ac_func;
--#endif
--#ifdef __cplusplus
--}
--#endif
--
--int
--main ()
--{
--return f != $ac_func;
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- eval "$as_ac_var=yes"
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--eval "$as_ac_var=no"
--fi
--rm -f conftest.err conftest.$ac_objext \
-- conftest$ac_exeext conftest.$ac_ext
--fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
--if test `eval echo '${'$as_ac_var'}'` = yes; then
-+do :
-+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
--#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
- _ACEOF
-
- fi
-@@ -7280,25 +6711,24 @@ done
-
- if test "$ac_client" = "YES"; then
-
--as_ac_File=`echo "ac_cv_file_$docbk_xsl/fo/docbook.xsl" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $docbk_xsl/fo/docbook.xsl" >&5
--echo $ECHO_N "checking for $docbk_xsl/fo/docbook.xsl... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$docbk_xsl/fo/docbook.xsl" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $docbk_xsl/fo/docbook.xsl" >&5
-+$as_echo_n "checking for $docbk_xsl/fo/docbook.xsl... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$docbk_xsl/fo/docbook.xsl"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
- echo "DocBook XSL stylesheets found"
- else
- if test -n "$myxmlcatalog"; then
-@@ -7308,36 +6738,35 @@ else
- refdb_xml_catalog=$XML_CATALOG_FILES
- fi
-
--echo "$as_me:$LINENO: checking for XML file ${docbk_xsl}/fo/docbook.xsl" >&5
--echo $ECHO_N "checking for XML file ${docbk_xsl}/fo/docbook.xsl... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML file ${docbk_xsl}/fo/docbook.xsl" >&5
-+$as_echo_n "checking for XML file ${docbk_xsl}/fo/docbook.xsl... " >&6; }
- xml_file=`$myxmlcatalog $refdb_xml_catalog ${docbk_xsl}/fo/docbook.xsl`
- xml_file=`echo $xml_file | sed 's%file://%%'`
--as_ac_File=`echo "ac_cv_file_$xml_file" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $xml_file" >&5
--echo $ECHO_N "checking for $xml_file... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$xml_file" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $xml_file" >&5
-+$as_echo_n "checking for $xml_file... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$xml_file"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
-
--echo "$as_me:$LINENO: result: XML file found" >&5
--echo "${ECHO_T}XML file found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file found" >&5
-+$as_echo "XML file found" >&6; }
- else
-
--echo "$as_me:$LINENO: result: XML file not found" >&5
--echo "${ECHO_T}XML file not found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file not found" >&5
-+$as_echo "XML file not found" >&6; }
-
- fi
-
-@@ -7347,25 +6776,24 @@ fi
- fi
-
-
--as_ac_File=`echo "ac_cv_file_$docbk_xsl_ns/fo/docbook.xsl" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $docbk_xsl_ns/fo/docbook.xsl" >&5
--echo $ECHO_N "checking for $docbk_xsl_ns/fo/docbook.xsl... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$docbk_xsl_ns/fo/docbook.xsl" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $docbk_xsl_ns/fo/docbook.xsl" >&5
-+$as_echo_n "checking for $docbk_xsl_ns/fo/docbook.xsl... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$docbk_xsl_ns/fo/docbook.xsl"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
- echo "DocBook XSL NS stylesheets found"
- else
- if test -n "$myxmlcatalog"; then
-@@ -7375,36 +6803,35 @@ else
- refdb_xml_catalog=$XML_CATALOG_FILES
- fi
-
--echo "$as_me:$LINENO: checking for XML file ${docbk_xsl_ns}/fo/docbook.xsl" >&5
--echo $ECHO_N "checking for XML file ${docbk_xsl_ns}/fo/docbook.xsl... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML file ${docbk_xsl_ns}/fo/docbook.xsl" >&5
-+$as_echo_n "checking for XML file ${docbk_xsl_ns}/fo/docbook.xsl... " >&6; }
- xml_file=`$myxmlcatalog $refdb_xml_catalog ${docbk_xsl_ns}/fo/docbook.xsl`
- xml_file=`echo $xml_file | sed 's%file://%%'`
--as_ac_File=`echo "ac_cv_file_$xml_file" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $xml_file" >&5
--echo $ECHO_N "checking for $xml_file... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$xml_file" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $xml_file" >&5
-+$as_echo_n "checking for $xml_file... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$xml_file"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
-
--echo "$as_me:$LINENO: result: XML file found" >&5
--echo "${ECHO_T}XML file found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file found" >&5
-+$as_echo "XML file found" >&6; }
- else
-
--echo "$as_me:$LINENO: result: XML file not found" >&5
--echo "${ECHO_T}XML file not found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file not found" >&5
-+$as_echo "XML file not found" >&6; }
-
- fi
-
-@@ -7414,25 +6841,24 @@ fi
- fi
-
-
--as_ac_File=`echo "ac_cv_file_$tei_xsl/p4/fo/tei.xsl" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $tei_xsl/p4/fo/tei.xsl" >&5
--echo $ECHO_N "checking for $tei_xsl/p4/fo/tei.xsl... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$tei_xsl/p4/fo/tei.xsl" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $tei_xsl/p4/fo/tei.xsl" >&5
-+$as_echo_n "checking for $tei_xsl/p4/fo/tei.xsl... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$tei_xsl/p4/fo/tei.xsl"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
- echo "TEI XSL stylesheets found"
- else
- if test -n "$myxmlcatalog"; then
-@@ -7442,36 +6868,35 @@ else
- refdb_xml_catalog=$XML_CATALOG_FILES
- fi
-
--echo "$as_me:$LINENO: checking for XML file ${tei_xsl}/p4/fo/tei.xsl" >&5
--echo $ECHO_N "checking for XML file ${tei_xsl}/p4/fo/tei.xsl... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML file ${tei_xsl}/p4/fo/tei.xsl" >&5
-+$as_echo_n "checking for XML file ${tei_xsl}/p4/fo/tei.xsl... " >&6; }
- xml_file=`$myxmlcatalog $refdb_xml_catalog ${tei_xsl}/p4/fo/tei.xsl`
- xml_file=`echo $xml_file | sed 's%file://%%'`
--as_ac_File=`echo "ac_cv_file_$xml_file" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $xml_file" >&5
--echo $ECHO_N "checking for $xml_file... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$xml_file" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $xml_file" >&5
-+$as_echo_n "checking for $xml_file... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$xml_file"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
-
--echo "$as_me:$LINENO: result: XML file found" >&5
--echo "${ECHO_T}XML file found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file found" >&5
-+$as_echo "XML file found" >&6; }
- else
-
--echo "$as_me:$LINENO: result: XML file not found" >&5
--echo "${ECHO_T}XML file not found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file not found" >&5
-+$as_echo "XML file not found" >&6; }
-
- fi
-
-@@ -7481,25 +6906,24 @@ fi
- fi
-
-
--as_ac_File=`echo "ac_cv_file_$tei_xsl_ns/p5/fo/tei.xsl" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $tei_xsl_ns/p5/fo/tei.xsl" >&5
--echo $ECHO_N "checking for $tei_xsl_ns/p5/fo/tei.xsl... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$tei_xsl_ns/p5/fo/tei.xsl" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $tei_xsl_ns/p5/fo/tei.xsl" >&5
-+$as_echo_n "checking for $tei_xsl_ns/p5/fo/tei.xsl... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$tei_xsl_ns/p5/fo/tei.xsl"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
- echo "TEI XSL NS stylesheets found"
- else
- if test -n "$myxmlcatalog"; then
-@@ -7509,36 +6933,35 @@ else
- refdb_xml_catalog=$XML_CATALOG_FILES
- fi
-
--echo "$as_me:$LINENO: checking for XML file ${tei_xsl_ns}/p5/fo/tei.xsl" >&5
--echo $ECHO_N "checking for XML file ${tei_xsl_ns}/p5/fo/tei.xsl... $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML file ${tei_xsl_ns}/p5/fo/tei.xsl" >&5
-+$as_echo_n "checking for XML file ${tei_xsl_ns}/p5/fo/tei.xsl... " >&6; }
- xml_file=`$myxmlcatalog $refdb_xml_catalog ${tei_xsl_ns}/p5/fo/tei.xsl`
- xml_file=`echo $xml_file | sed 's%file://%%'`
--as_ac_File=`echo "ac_cv_file_$xml_file" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $xml_file" >&5
--echo $ECHO_N "checking for $xml_file... $ECHO_C" >&6
--if eval "test \"\${$as_ac_File+set}\" = set"; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+as_ac_File=`$as_echo "ac_cv_file_$xml_file" | $as_tr_sh`
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $xml_file" >&5
-+$as_echo_n "checking for $xml_file... " >&6; }
-+if eval "test \"\${$as_ac_File+set}\"" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- test "$cross_compiling" = yes &&
-- { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
--echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
- if test -r "$xml_file"; then
- eval "$as_ac_File=yes"
- else
- eval "$as_ac_File=no"
- fi
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6
--if test `eval echo '${'$as_ac_File'}'` = yes; then
-+eval ac_res=\$$as_ac_File
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
-
--echo "$as_me:$LINENO: result: XML file found" >&5
--echo "${ECHO_T}XML file found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file found" >&5
-+$as_echo "XML file found" >&6; }
- else
-
--echo "$as_me:$LINENO: result: XML file not found" >&5
--echo "${ECHO_T}XML file not found" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: XML file not found" >&5
-+$as_echo "XML file not found" >&6; }
-
- fi
-
-@@ -7549,163 +6972,164 @@ fi
-
-
- refdb_perl_command='print $]'
--echo "$as_me:$LINENO: checking for Perl version" >&5
--echo $ECHO_N "checking for Perl version... $ECHO_C" >&6
--if test "${refdb_perl_version+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl version" >&5
-+$as_echo_n "checking for Perl version... " >&6; }
-+if test "${refdb_perl_version+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'require 5.006;' > /dev/null 2>&1 ; then
- refdb_perl_version=`$myperl -e "$refdb_perl_command"`
- else
-- { echo "$as_me:$LINENO: WARNING: Perl 5.006 or greater is required for some scripts" >&5
--echo "$as_me: WARNING: Perl 5.006 or greater is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl 5.006 or greater is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl 5.006 or greater is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_perl_version" >&5
--echo "${ECHO_T}$refdb_perl_version" >&6
--echo "$as_me:$LINENO: checking for Perl module Text::Iconv" >&5
--echo $ECHO_N "checking for Perl module Text::Iconv... $ECHO_C" >&6
--if test "${refdb_iconv+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_perl_version" >&5
-+$as_echo "$refdb_perl_version" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module Text::Iconv" >&5
-+$as_echo_n "checking for Perl module Text::Iconv... " >&6; }
-+if test "${refdb_iconv+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use Text::Iconv;' > /dev/null 2>&1 ; then
- refdb_iconv=Text::Iconv
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module Text::Iconv is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module Text::Iconv is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module Text::Iconv is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module Text::Iconv is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_iconv" >&5
--echo "${ECHO_T}$refdb_iconv" >&6
--echo "$as_me:$LINENO: checking for Perl module Term::Clui" >&5
--echo $ECHO_N "checking for Perl module Term::Clui... $ECHO_C" >&6
--if test "${refdb_clui+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_iconv" >&5
-+$as_echo "$refdb_iconv" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module Term::Clui" >&5
-+$as_echo_n "checking for Perl module Term::Clui... " >&6; }
-+if test "${refdb_clui+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use Term::Clui;' > /dev/null 2>&1 ; then
- refdb_clui=Term::Clui
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module Term::Clui is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module Term::Clui is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module Term::Clui is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module Term::Clui is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_clui" >&5
--echo "${ECHO_T}$refdb_clui" >&6
--echo "$as_me:$LINENO: checking for Perl module RefDB::Makestyle" >&5
--echo $ECHO_N "checking for Perl module RefDB::Makestyle... $ECHO_C" >&6
--if test "${refdb_makestyle+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_clui" >&5
-+$as_echo "$refdb_clui" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module RefDB::Makestyle" >&5
-+$as_echo_n "checking for Perl module RefDB::Makestyle... " >&6; }
-+if test "${refdb_makestyle+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use RefDB::Makestyle;' > /dev/null 2>&1 ; then
- refdb_makestyle=RefDB::Makestyle
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module RefDB::Makestyle is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module RefDB::Makestyle is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module RefDB::Makestyle is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module RefDB::Makestyle is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_makestyle" >&5
--echo "${ECHO_T}$refdb_makestyle" >&6
--echo "$as_me:$LINENO: checking for Perl module RefDB::Prefs" >&5
--echo $ECHO_N "checking for Perl module RefDB::Prefs... $ECHO_C" >&6
--if test "${refdb_prefs+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_makestyle" >&5
-+$as_echo "$refdb_makestyle" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module RefDB::Prefs" >&5
-+$as_echo_n "checking for Perl module RefDB::Prefs... " >&6; }
-+if test "${refdb_prefs+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use RefDB::Prefs;' > /dev/null 2>&1 ; then
- refdb_prefs=RefDB::Prefs
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module RefDB::Prefs is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module RefDB::Prefs is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module RefDB::Prefs is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module RefDB::Prefs is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_prefs" >&5
--echo "${ECHO_T}$refdb_prefs" >&6
--echo "$as_me:$LINENO: checking for Perl module RefDB::SRU" >&5
--echo $ECHO_N "checking for Perl module RefDB::SRU... $ECHO_C" >&6
--if test "${refdb_sru+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_prefs" >&5
-+$as_echo "$refdb_prefs" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module RefDB::SRU" >&5
-+$as_echo_n "checking for Perl module RefDB::SRU... " >&6; }
-+if test "${refdb_sru+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use RefDB::SRU;' > /dev/null 2>&1 ; then
- refdb_sru=RefDB::SRU
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module RefDB::SRU is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module RefDB::SRU is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module RefDB::SRU is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module RefDB::SRU is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_sru" >&5
--echo "${ECHO_T}$refdb_sru" >&6
--echo "$as_me:$LINENO: checking for Perl module RefDB::SRUserver" >&5
--echo $ECHO_N "checking for Perl module RefDB::SRUserver... $ECHO_C" >&6
--if test "${refdb_sruserver+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_sru" >&5
-+$as_echo "$refdb_sru" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module RefDB::SRUserver" >&5
-+$as_echo_n "checking for Perl module RefDB::SRUserver... " >&6; }
-+if test "${refdb_sruserver+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use RefDB::SRUserver;' > /dev/null 2>&1 ; then
- refdb_sruserver=RefDB::SRUserver
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module RefDB::SRUserver is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module RefDB::SRUserver is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module RefDB::SRUserver is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module RefDB::SRUserver is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_sruserver" >&5
--echo "${ECHO_T}$refdb_sruserver" >&6
--echo "$as_me:$LINENO: checking for Perl module XML::Parser" >&5
--echo $ECHO_N "checking for Perl module XML::Parser... $ECHO_C" >&6
--if test "${refdb_parser+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_sruserver" >&5
-+$as_echo "$refdb_sruserver" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module XML::Parser" >&5
-+$as_echo_n "checking for Perl module XML::Parser... " >&6; }
-+if test "${refdb_parser+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use XML::Parser;' > /dev/null 2>&1 ; then
- refdb_parser=XML::Parser
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module XML::Parser is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module XML::Parser is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module XML::Parser is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module XML::Parser is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_parser" >&5
--echo "${ECHO_T}$refdb_parser" >&6
--echo "$as_me:$LINENO: checking for Perl module MARC::Record" >&5
--echo $ECHO_N "checking for Perl module MARC::Record... $ECHO_C" >&6
--if test "${refdb_record+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_parser" >&5
-+$as_echo "$refdb_parser" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module MARC::Record" >&5
-+$as_echo_n "checking for Perl module MARC::Record... " >&6; }
-+if test "${refdb_record+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use MARC::Record;' > /dev/null 2>&1 ; then
- refdb_record=MARC::Record
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module MARC::Record is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module MARC::Record is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module MARC::Record is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module MARC::Record is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_record" >&5
--echo "${ECHO_T}$refdb_record" >&6
--echo "$as_me:$LINENO: checking for Perl module MARC::Charset" >&5
--echo $ECHO_N "checking for Perl module MARC::Charset... $ECHO_C" >&6
--if test "${refdb_charset+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_record" >&5
-+$as_echo "$refdb_record" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module MARC::Charset" >&5
-+$as_echo_n "checking for Perl module MARC::Charset... " >&6; }
-+if test "${refdb_charset+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use MARC::Charset;' > /dev/null 2>&1 ; then
- refdb_charset=MARC::Charset
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module MARC::Charset is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module MARC::Charset is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module MARC::Charset is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module MARC::Charset is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_charset" >&5
--echo "${ECHO_T}$refdb_charset" >&6
--echo "$as_me:$LINENO: checking for Perl module CGI" >&5
--echo $ECHO_N "checking for Perl module CGI... $ECHO_C" >&6
--if test "${refdb_cgi+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_charset" >&5
-+$as_echo "$refdb_charset" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Perl module CGI" >&5
-+$as_echo_n "checking for Perl module CGI... " >&6; }
-+if test "${refdb_cgi+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
- else
- if $myperl -e 'use CGI;' > /dev/null 2>&1 ; then
- refdb_cgi=CGI
- else
-- { echo "$as_me:$LINENO: WARNING: Perl module CGI is required for some scripts" >&5
--echo "$as_me: WARNING: Perl module CGI is required for some scripts" >&2;}
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Perl module CGI is required for some scripts" >&5
-+$as_echo "$as_me: WARNING: Perl module CGI is required for some scripts" >&2;}
- fi
- fi
--echo "$as_me:$LINENO: result: $refdb_cgi" >&5
--echo "${ECHO_T}$refdb_cgi" >&6
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $refdb_cgi" >&5
-+$as_echo "$refdb_cgi" >&6; }
-
- fi
-- ac_config_files="$ac_config_files src/Makefile scripts/Makefile etc/Makefile doc/Makefile dtd/Makefile declarations/Makefile examples/Makefile styles/Makefile phpweb/Makefile phpweb/css/Makefile phpweb/images/Makefile phpweb/includes/Makefile phpweb/xsl/Makefile sru/Makefile dsssl/Makefile dsssl/refdb/Makefile dsssl/refdb/html/Makefile dsssl/refdb/print/Makefile dsssl/refdb/lib/Makefile xsl/Makefile xsl/refdb/Makefile xsl/refdb/common-refdb/Makefile xsl/refdb/docbk-refdb-xsl/Makefile xsl/refdb/docbk-refdb-xsl/docbk-fo/Makefile xsl/refdb/docbk-refdb-xsl/docbk-html/Makefile xsl/refdb/docbk-refdb-xsl/docbk-xhtml/Makefile xsl/refdb/docbk-refdb-xsl/docbk-lib/Makefile xsl/refdb/tei-refdb-xsl/Makefile xsl/refdb/tei-refdb-xsl/tei-fo/Makefile xsl/refdb/tei-refdb-xsl/tei-html/Makefile xsl/refdb/tei-refdb-xsl/tei-lib/Makefile man/Makefile Makefile"
-+ac_config_files="$ac_config_files src/Makefile scripts/Makefile etc/Makefile doc/Makefile dtd/Makefile declarations/Makefile examples/Makefile styles/Makefile phpweb/Makefile phpweb/css/Makefile phpweb/images/Makefile phpweb/includes/Makefile phpweb/xsl/Makefile sru/Makefile dsssl/Makefile dsssl/refdb/Makefile dsssl/refdb/html/Makefile dsssl/refdb/print/Makefile dsssl/refdb/lib/Makefile xsl/Makefile xsl/refdb/Makefile xsl/refdb/common-refdb/Makefile xsl/refdb/docbk-refdb-xsl/Makefile xsl/refdb/docbk-refdb-xsl/docbk-fo/Makefile xsl/refdb/docbk-refdb-xsl/docbk-html/Makefile xsl/refdb/docbk-refdb-xsl/docbk-xhtml/Makefile xsl/refdb/docbk-refdb-xsl/docbk-lib/Makefile xsl/refdb/tei-refdb-xsl/Makefile xsl/refdb/tei-refdb-xsl/tei-fo/Makefile xsl/refdb/tei-refdb-xsl/tei-html/Makefile xsl/refdb/tei-refdb-xsl/tei-lib/Makefile man/Makefile Makefile"
-+
- cat >confcache <<\_ACEOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
-@@ -7724,39 +7148,59 @@ _ACEOF
-
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
--# So, don't put newlines in cache variables' values.
-+# So, we kill variables containing newlines.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-+ *) { eval $ac_var=; unset $ac_var;} ;;
-+ esac ;;
-+ esac
-+ done
-+
- (set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-- # `set' does not quote correctly, so add quotes (double-quote
-- # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes: double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-- ;;
-+ ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--} |
-+ esac |
-+ sort
-+) |
- sed '
-+ /^ac_cv_env_/b end
- t clear
-- : clear
-+ :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
-- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-- : end' >>confcache
--if diff $cache_file confcache >/dev/null 2>&1; then :; else
-- if test -w $cache_file; then
-- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+ if test -w "$cache_file"; then
-+ test "x$cache_file" != "x/dev/null" &&
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-+$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
-- echo "not updating unwritable cache $cache_file"
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
- fi
- rm -f confcache
-@@ -7765,63 +7209,55 @@ test "x$prefix" = xNONE && prefix=$ac_de
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# VPATH may cause trouble with some makes, so we remove $(srcdir),
--# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
--# trailing colons and then remove the whole line if VPATH becomes empty
--# (actually we leave an empty line to preserve line numbers).
--if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=/{
--s/:*\$(srcdir):*/:/;
--s/:*\${srcdir}:*/:/;
--s/:*@srcdir@:*/:/;
--s/^\([^=]*=[ ]*\):*/\1/;
--s/:*$//;
--s/^[^=]*=[ ]*$//;
--}'
--fi
--
- # Transform confdefs.h into DEFS.
- # Protect against shell expansion while executing Makefile rules.
- # Protect against Makefile macro expansion.
- #
- # If the first sed substitution is executed (which looks for macros that
--# take arguments), then we branch to the quote section. Otherwise,
-+# take arguments), then branch to the quote section. Otherwise,
- # look for a macro that doesn't take arguments.
--cat >confdef2opt.sed <<\_ACEOF
-+ac_script='
-+:mline
-+/\\$/{
-+ N
-+ s,\\\n,,
-+ b mline
-+}
- t clear
--: clear
--s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-+:clear
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--d
--: quote
--s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
--s,\[,\\&,g
--s,\],\\&,g
--s,\$,$$,g
--p
--_ACEOF
--# We use echo to avoid assuming a particular line-breaking character.
--# The extra dot is to prevent the shell from consuming trailing
--# line-breaks from the sub-command output. A line-break within
--# single-quotes doesn't work because, if this script is created in a
--# platform that uses two characters for line-breaks (e.g., DOS), tr
--# would break.
--ac_LF_and_DOT=`echo; echo .`
--DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
--rm -f confdef2opt.sed
-+b any
-+:quote
-+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+ g
-+ s/^\n//
-+ s/\n/ /g
-+ p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-
-
- ac_libobjs=
- ac_ltlibobjs=
-+U=
- for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
-- ac_i=`echo "$ac_i" |
-- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-- # 2. Add them.
-- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
-+ # will be set to the directory where LIBOBJS objects are built.
-+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
- done
- LIBOBJS=$ac_libobjs
-
-@@ -7829,47 +7265,34 @@ LTLIBOBJS=$ac_ltlibobjs
-
-
- if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"AMDEP\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- if test -z "${HAVEBATIK_TRUE}" && test -z "${HAVEBATIK_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"HAVEBATIK\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"HAVEBATIK\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "conditional \"HAVEBATIK\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- if test -z "${HAVESERVER_TRUE}" && test -z "${HAVESERVER_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"HAVESERVER\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"HAVESERVER\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "conditional \"HAVESERVER\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- if test -z "${HAVESVNWC_TRUE}" && test -z "${HAVESVNWC_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"HAVESVNWC\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"HAVESVNWC\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
-- { (exit 1); exit 1; }; }
-+ as_fn_error $? "conditional \"HAVESVNWC\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
-
- : ${CONFIG_STATUS=./config.status}
-+ac_write_fail=0
- ac_clean_files_save=$ac_clean_files
- ac_clean_files="$ac_clean_files $CONFIG_STATUS"
--{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
--echo "$as_me: creating $CONFIG_STATUS" >&6;}
--cat >$CONFIG_STATUS <<_ACEOF
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+as_write_fail=0
-+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
- #! $SHELL
- # Generated by $as_me.
- # Run this file to recreate the current configuration.
-@@ -7879,81 +7302,252 @@ cat >$CONFIG_STATUS <<_ACEOF
- debug=false
- ac_cs_recheck=false
- ac_cs_silent=false
--SHELL=\${CONFIG_SHELL-$SHELL}
--_ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
--## --------------------- ##
--## M4sh Initialization. ##
--## --------------------- ##
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+export SHELL
-+_ASEOF
-+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-+## -------------------- ##
-+## M4sh Initialization. ##
-+## -------------------- ##
-
--# Be Bourne compatible
--if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
-- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in #(
-+ *posix*) :
-+ set -o posix ;; #(
-+ *) :
-+ ;;
-+esac
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
--# Support unset when possible.
--if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-- as_unset=unset
--else
-- as_unset=false
-+
-+as_nl='
-+'
-+export as_nl
-+# Printing a long string crashes Solaris 7 /usr/bin/printf.
-+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-+# Prefer a ksh shell builtin over an external printf program on Solaris,
-+# but without wasting forks for bash or zsh.
-+if test -z "$BASH_VERSION$ZSH_VERSION" \
-+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-+ as_echo='print -r --'
-+ as_echo_n='print -rn --'
-+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-+ as_echo='printf %s\n'
-+ as_echo_n='printf %s'
-+else
-+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-+ as_echo_n='/usr/ucb/echo -n'
-+ else
-+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-+ as_echo_n_body='eval
-+ arg=$1;
-+ case $arg in #(
-+ *"$as_nl"*)
-+ expr "X$arg" : "X\\(.*\\)$as_nl";
-+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-+ esac;
-+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-+ '
-+ export as_echo_n_body
-+ as_echo_n='sh -c $as_echo_n_body as_echo'
-+ fi
-+ export as_echo_body
-+ as_echo='sh -c $as_echo_body as_echo'
-+fi
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ PATH_SEPARATOR=:
-+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-+ PATH_SEPARATOR=';'
-+ }
- fi
-
-
--# Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in #((
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+ done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ exit 1
-+fi
-+
-+# Unset variables that we do not need and which cause bugs (e.g. in
-+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-+# suppresses any "Segmentation fault" message there. '((' could
-+# trigger a bug in pdksh 5.2.14.
-+for as_var in BASH_ENV ENV MAIL MAILPATH
-+do eval test x\${$as_var+set} = xset \
-+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-
- # NLS nuisances.
--for as_var in \
-- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-- LC_TELEPHONE LC_TIME
--do
-- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-- eval $as_var=C; export $as_var
-- else
-- $as_unset $as_var
-- fi
--done
-+LC_ALL=C
-+export LC_ALL
-+LANGUAGE=C
-+export LANGUAGE
-+
-+# CDPATH.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+
-+# as_fn_error STATUS ERROR [LINENO LOG_FD]
-+# ----------------------------------------
-+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-+# script with STATUS, using 1 if that was 0.
-+as_fn_error ()
-+{
-+ as_status=$1; test $as_status -eq 0 && as_status=1
-+ if test "$4"; then
-+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-+ fi
-+ $as_echo "$as_me: error: $2" >&2
-+ as_fn_exit $as_status
-+} # as_fn_error
-+
-+
-+# as_fn_set_status STATUS
-+# -----------------------
-+# Set $? to STATUS, without forking.
-+as_fn_set_status ()
-+{
-+ return $1
-+} # as_fn_set_status
-+
-+# as_fn_exit STATUS
-+# -----------------
-+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-+as_fn_exit ()
-+{
-+ set +e
-+ as_fn_set_status $1
-+ exit $1
-+} # as_fn_exit
-+
-+# as_fn_unset VAR
-+# ---------------
-+# Portably unset VAR.
-+as_fn_unset ()
-+{
-+ { eval $1=; unset $1;}
-+}
-+as_unset=as_fn_unset
-+# as_fn_append VAR VALUE
-+# ----------------------
-+# Append the text in VALUE to the end of the definition contained in VAR. Take
-+# advantage of any shell optimizations that allow amortized linear growth over
-+# repeated appends, instead of the typical quadratic growth present in naive
-+# implementations.
-+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-+ eval 'as_fn_append ()
-+ {
-+ eval $1+=\$2
-+ }'
-+else
-+ as_fn_append ()
-+ {
-+ eval $1=\$$1\$2
-+ }
-+fi # as_fn_append
-+
-+# as_fn_arith ARG...
-+# ------------------
-+# Perform arithmetic evaluation on the ARGs, and store the result in the
-+# global $as_val. Take advantage of shells that can avoid forks. The arguments
-+# must be portable across $(()) and expr.
-+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-+ eval 'as_fn_arith ()
-+ {
-+ as_val=$(( $* ))
-+ }'
-+else
-+ as_fn_arith ()
-+ {
-+ as_val=`expr "$@" || test $? -eq 1`
-+ }
-+fi # as_fn_arith
-
--# Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
- fi
-
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-
--# Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
--
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
--# PATH needs CR, and LINENO needs CR and PATH.
- # Avoid depending upon Character Ranges.
- as_cr_letters='abcdefghijklmnopqrstuvwxyz'
- as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-@@ -7961,148 +7555,123 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
- as_cr_digits='0123456789'
- as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
--fi
--
--
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
--
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
--echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-- /*)
-- if ("$as_dir/$as_base" -c '
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
--
-- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-- sed '
-- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
--echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-- { (exit 1); exit 1; }; }
--
-- # Don't try to exec as it changes $[0], causing all sort of problems
-- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-- # Exit status is that of the last command.
-- exit
--}
--
--
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in #(((((
-+-n*)
-+ case `echo 'xy\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ xy) ECHO_C='\c';;
-+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
-+ ECHO_T=' ';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-- as_expr=expr
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
- else
-- as_expr=false
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir 2>/dev/null
- fi
--
--rm -f conf$$ conf$$.exe conf$$.file
--echo >conf$$.file
--if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-- as_ln_s='cp -p'
-- else
-+if (echo >conf$$.file) 2>/dev/null; then
-+ if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+ elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+ else
-+ as_ln_s='cp -p'
- fi
--elif ln conf$$.file conf$$ 2>/dev/null; then
-- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+
-+# as_fn_mkdir_p
-+# -------------
-+# Create "$as_dir" as a directory, including parents if necessary.
-+as_fn_mkdir_p ()
-+{
-+
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || eval $as_mkdir_p || {
-+ as_dirs=
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
-+ done
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-+
-+} # as_fn_mkdir_p
- if mkdir -p . 2>/dev/null; then
-- as_mkdir_p=:
-+ as_mkdir_p='mkdir -p "$as_dir"'
- else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in #(
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -8111,31 +7680,20 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
--
- exec 6>&1
-+## ----------------------------------- ##
-+## Main body of $CONFIG_STATUS script. ##
-+## ----------------------------------- ##
-+_ASEOF
-+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
--# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+# Save the log message, to keep $0 and so on meaningful, and to
- # report actual input values of CONFIG_FILES etc. instead of their
--# values after options handling. Logging --version etc. is OK.
--exec 5>>config.log
--{
-- echo
-- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
--## Running $as_me. ##
--_ASBOX
--} >&5
--cat >&5 <<_CSEOF
--
--This file was extended by refdb $as_me 0.9.9-1, which was
--generated by GNU Autoconf 2.59. Invocation command line was
-+# values after options handling.
-+ac_log="
-+This file was extended by refdb $as_me 0.9.9, which was
-+generated by GNU Autoconf 2.67. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
-@@ -8143,43 +7701,41 @@ generated by GNU Autoconf 2.59. Invocat
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
--_CSEOF
--echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
--echo >&5
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
- _ACEOF
-
--# Files that config.status was made for.
--if test -n "$ac_config_files"; then
-- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
--fi
-+case $ac_config_files in *"
-+"*) set x $ac_config_files; shift; ac_config_files=$*;;
-+esac
-
--if test -n "$ac_config_headers"; then
-- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
--fi
-
--if test -n "$ac_config_links"; then
-- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
--fi
-
--if test -n "$ac_config_commands"; then
-- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
--fi
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+# Files that config.status was made for.
-+config_files="$ac_config_files"
-+config_commands="$ac_config_commands"
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-+_ACEOF
-
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- ac_cs_usage="\
--\`$as_me' instantiates files from templates according to the
--current configuration.
-+\`$as_me' instantiates files and other configuration actions
-+from templates according to the current configuration. Unless the files
-+and actions are specified as TAGs, all are instantiated by default.
-
--Usage: $0 [OPTIONS] [FILE]...
-+Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
-- -V, --version print version number, then exit
-- -q, --quiet do not print progress messages
-+ -V, --version print version number and configuration settings, then exit
-+ --config print configuration, then exit
-+ -q, --quiet, --silent
-+ do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
-- --file=FILE[:TEMPLATE]
-- instantiate the configuration file FILE
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-
- Configuration files:
- $config_files
-@@ -8187,84 +7743,80 @@ $config_files
- Configuration commands:
- $config_commands
-
--Report bugs to <bug-autoconf at gnu.org>."
--_ACEOF
-+Report bugs to the package provider."
-
--cat >>$CONFIG_STATUS <<_ACEOF
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
- ac_cs_version="\\
--refdb config.status 0.9.9-1
--configured by $0, generated by GNU Autoconf 2.59,
-- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-+refdb config.status 0.9.9
-+configured by $0, generated by GNU Autoconf 2.67,
-+ with options \\"\$ac_cs_config\\"
-
--Copyright (C) 2003 Free Software Foundation, Inc.
-+Copyright (C) 2010 Free Software Foundation, Inc.
- This config.status script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it."
--srcdir=$srcdir
--INSTALL="$INSTALL"
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
-+INSTALL='$INSTALL'
-+AWK='$AWK'
-+test -n "\$AWK" || AWK=awk
- _ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
--# If no file are specified by the user, then we need to provide default
--# value. By we need to know if files were specified by the user.
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+# The default lists apply if the user does not specify any file.
- ac_need_defaults=:
- while test $# != 0
- do
- case $1 in
-- --*=*)
-- ac_option=`expr "x$1" : 'x\([^=]*\)='`
-- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ --*=?*)
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
-- -*)
-+ --*=)
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=
-+ ac_shift=:
-+ ;;
-+ *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
-- *) # This is not an option, so the user has probably given explicit
-- # arguments.
-- ac_option=$1
-- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
--_ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
-- --version | --vers* | -V )
-- echo "$ac_cs_version"; exit 0 ;;
-- --he | --h)
-- # Conflict between --help and --header
-- { { echo "$as_me:$LINENO: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&2;}
-- { (exit 1); exit 1; }; };;
-- --help | --hel | -h )
-- echo "$ac_cs_usage"; exit 0 ;;
-- --debug | --d* | -d )
-+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+ $as_echo "$ac_cs_version"; exit ;;
-+ --config | --confi | --conf | --con | --co | --c )
-+ $as_echo "$ac_cs_config"; exit ;;
-+ --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
-- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-- ac_need_defaults=false;;
-- --header | --heade | --head | --hea )
-- $ac_shift
-- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-+ case $ac_optarg in
-+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ '') as_fn_error $? "missing file argument" ;;
-+ esac
-+ as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
-+ --he | --h | --help | --hel | -h )
-+ $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
-- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&2;}
-- { (exit 1); exit 1; }; } ;;
-+ -*) as_fn_error $? "unrecognized option: \`$1'
-+Try \`$0 --help' for more information." ;;
-
-- *) ac_config_targets="$ac_config_targets $1" ;;
-+ *) as_fn_append ac_config_targets " $1"
-+ ac_need_defaults=false ;;
-
- esac
- shift
-@@ -8278,70 +7830,82 @@ if $ac_cs_silent; then
- fi
-
- _ACEOF
--cat >>$CONFIG_STATUS <<_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- if \$ac_cs_recheck; then
-- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ shift
-+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-+ CONFIG_SHELL='$SHELL'
-+ export CONFIG_SHELL
-+ exec "\$@"
- fi
-
- _ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+ $as_echo "$ac_log"
-+} >&5
-
--cat >>$CONFIG_STATUS <<_ACEOF
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- #
--# INIT-COMMANDS section.
-+# INIT-COMMANDS
- #
--
- AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
- _ACEOF
-
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
--
--cat >>$CONFIG_STATUS <<\_ACEOF
-+# Handling of arguments.
- for ac_config_target in $ac_config_targets
- do
-- case "$ac_config_target" in
-- # Handling of arguments.
-- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-- "scripts/Makefile" ) CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;;
-- "etc/Makefile" ) CONFIG_FILES="$CONFIG_FILES etc/Makefile" ;;
-- "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-- "dtd/Makefile" ) CONFIG_FILES="$CONFIG_FILES dtd/Makefile" ;;
-- "declarations/Makefile" ) CONFIG_FILES="$CONFIG_FILES declarations/Makefile" ;;
-- "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
-- "styles/Makefile" ) CONFIG_FILES="$CONFIG_FILES styles/Makefile" ;;
-- "phpweb/Makefile" ) CONFIG_FILES="$CONFIG_FILES phpweb/Makefile" ;;
-- "phpweb/css/Makefile" ) CONFIG_FILES="$CONFIG_FILES phpweb/css/Makefile" ;;
-- "phpweb/images/Makefile" ) CONFIG_FILES="$CONFIG_FILES phpweb/images/Makefile" ;;
-- "phpweb/includes/Makefile" ) CONFIG_FILES="$CONFIG_FILES phpweb/includes/Makefile" ;;
-- "phpweb/xsl/Makefile" ) CONFIG_FILES="$CONFIG_FILES phpweb/xsl/Makefile" ;;
-- "sru/Makefile" ) CONFIG_FILES="$CONFIG_FILES sru/Makefile" ;;
-- "dsssl/Makefile" ) CONFIG_FILES="$CONFIG_FILES dsssl/Makefile" ;;
-- "dsssl/refdb/Makefile" ) CONFIG_FILES="$CONFIG_FILES dsssl/refdb/Makefile" ;;
-- "dsssl/refdb/html/Makefile" ) CONFIG_FILES="$CONFIG_FILES dsssl/refdb/html/Makefile" ;;
-- "dsssl/refdb/print/Makefile" ) CONFIG_FILES="$CONFIG_FILES dsssl/refdb/print/Makefile" ;;
-- "dsssl/refdb/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES dsssl/refdb/lib/Makefile" ;;
-- "xsl/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/Makefile" ;;
-- "xsl/refdb/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/Makefile" ;;
-- "xsl/refdb/common-refdb/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/common-refdb/Makefile" ;;
-- "xsl/refdb/docbk-refdb-xsl/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/Makefile" ;;
-- "xsl/refdb/docbk-refdb-xsl/docbk-fo/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-fo/Makefile" ;;
-- "xsl/refdb/docbk-refdb-xsl/docbk-html/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-html/Makefile" ;;
-- "xsl/refdb/docbk-refdb-xsl/docbk-xhtml/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-xhtml/Makefile" ;;
-- "xsl/refdb/docbk-refdb-xsl/docbk-lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-lib/Makefile" ;;
-- "xsl/refdb/tei-refdb-xsl/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/Makefile" ;;
-- "xsl/refdb/tei-refdb-xsl/tei-fo/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/tei-fo/Makefile" ;;
-- "xsl/refdb/tei-refdb-xsl/tei-html/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/tei-html/Makefile" ;;
-- "xsl/refdb/tei-refdb-xsl/tei-lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/tei-lib/Makefile" ;;
-- "man/Makefile" ) CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
-- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
--echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-- { (exit 1); exit 1; }; };;
-+ case $ac_config_target in
-+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-+ "scripts/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;;
-+ "etc/Makefile") CONFIG_FILES="$CONFIG_FILES etc/Makefile" ;;
-+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-+ "dtd/Makefile") CONFIG_FILES="$CONFIG_FILES dtd/Makefile" ;;
-+ "declarations/Makefile") CONFIG_FILES="$CONFIG_FILES declarations/Makefile" ;;
-+ "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
-+ "styles/Makefile") CONFIG_FILES="$CONFIG_FILES styles/Makefile" ;;
-+ "phpweb/Makefile") CONFIG_FILES="$CONFIG_FILES phpweb/Makefile" ;;
-+ "phpweb/css/Makefile") CONFIG_FILES="$CONFIG_FILES phpweb/css/Makefile" ;;
-+ "phpweb/images/Makefile") CONFIG_FILES="$CONFIG_FILES phpweb/images/Makefile" ;;
-+ "phpweb/includes/Makefile") CONFIG_FILES="$CONFIG_FILES phpweb/includes/Makefile" ;;
-+ "phpweb/xsl/Makefile") CONFIG_FILES="$CONFIG_FILES phpweb/xsl/Makefile" ;;
-+ "sru/Makefile") CONFIG_FILES="$CONFIG_FILES sru/Makefile" ;;
-+ "dsssl/Makefile") CONFIG_FILES="$CONFIG_FILES dsssl/Makefile" ;;
-+ "dsssl/refdb/Makefile") CONFIG_FILES="$CONFIG_FILES dsssl/refdb/Makefile" ;;
-+ "dsssl/refdb/html/Makefile") CONFIG_FILES="$CONFIG_FILES dsssl/refdb/html/Makefile" ;;
-+ "dsssl/refdb/print/Makefile") CONFIG_FILES="$CONFIG_FILES dsssl/refdb/print/Makefile" ;;
-+ "dsssl/refdb/lib/Makefile") CONFIG_FILES="$CONFIG_FILES dsssl/refdb/lib/Makefile" ;;
-+ "xsl/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/Makefile" ;;
-+ "xsl/refdb/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/Makefile" ;;
-+ "xsl/refdb/common-refdb/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/common-refdb/Makefile" ;;
-+ "xsl/refdb/docbk-refdb-xsl/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/Makefile" ;;
-+ "xsl/refdb/docbk-refdb-xsl/docbk-fo/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-fo/Makefile" ;;
-+ "xsl/refdb/docbk-refdb-xsl/docbk-html/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-html/Makefile" ;;
-+ "xsl/refdb/docbk-refdb-xsl/docbk-xhtml/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-xhtml/Makefile" ;;
-+ "xsl/refdb/docbk-refdb-xsl/docbk-lib/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/docbk-refdb-xsl/docbk-lib/Makefile" ;;
-+ "xsl/refdb/tei-refdb-xsl/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/Makefile" ;;
-+ "xsl/refdb/tei-refdb-xsl/tei-fo/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/tei-fo/Makefile" ;;
-+ "xsl/refdb/tei-refdb-xsl/tei-html/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/tei-html/Makefile" ;;
-+ "xsl/refdb/tei-refdb-xsl/tei-lib/Makefile") CONFIG_FILES="$CONFIG_FILES xsl/refdb/tei-refdb-xsl/tei-lib/Makefile" ;;
-+ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
-+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+
-+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
- esac
- done
-
-+
- # If the user did not use the arguments to specify the items to instantiate,
- # then the envvar interface is used. Set only those that are not.
- # We use the long form for the default assignment because of an extremely
-@@ -8352,532 +7916,411 @@ if $ac_need_defaults; then
- fi
-
- # Have a temporary directory for convenience. Make it in the build tree
--# simply because there is no reason to put it here, and in addition,
-+# simply because there is no reason against having it here, and in addition,
- # creating and moving files from /tmp can sometimes cause problems.
--# Create a temporary directory, and hook for its removal unless debugging.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
- $debug ||
- {
-- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-- trap '{ (exit 1); exit 1; }' 1 2 13 15
-+ tmp=
-+ trap 'exit_status=$?
-+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
-+ trap 'as_fn_exit 1' 1 2 13 15
- }
--
- # Create a (secure) tmp directory for tmp files.
-
- {
-- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
- } ||
- {
-- tmp=./confstat$$-$RANDOM
-- (umask 077 && mkdir $tmp)
--} ||
-+ tmp=./conf$$-$RANDOM
-+ (umask 077 && mkdir "$tmp")
-+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-+
-+# Set up the scripts for CONFIG_FILES section.
-+# No need to generate them if there are no CONFIG_FILES.
-+# This happens for instance with `./config.status config.h'.
-+if test -n "$CONFIG_FILES"; then
-+
-+
-+ac_cr=`echo X | tr X '\015'`
-+# On cygwin, bash can eat \r inside `` if the user requested igncr.
-+# But we know of no other shell where ac_cr would be empty at this
-+# point, so we can use a bashism as a fallback.
-+if test "x$ac_cr" = x; then
-+ eval ac_cr=\$\'\\r\'
-+fi
-+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-+ ac_cs_awk_cr='\\r'
-+else
-+ ac_cs_awk_cr=$ac_cr
-+fi
-+
-+echo 'BEGIN {' >"$tmp/subs1.awk" &&
-+_ACEOF
-+
-+
-+{
-+ echo "cat >conf$$subs.awk <<_ACEOF" &&
-+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-+ echo "_ACEOF"
-+} >conf$$subs.sh ||
-+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ . ./conf$$subs.sh ||
-+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-+
-+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-+ if test $ac_delim_n = $ac_delim_num; then
-+ break
-+ elif $ac_last_try; then
-+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+ fi
-+done
-+rm -f conf$$subs.sh
-+
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
-+_ACEOF
-+sed -n '
-+h
-+s/^/S["/; s/!.*/"]=/
-+p
-+g
-+s/^[^!]*!//
-+:repl
-+t repl
-+s/'"$ac_delim"'$//
-+t delim
-+:nl
-+h
-+s/\(.\{148\}\)..*/\1/
-+t more1
-+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-+p
-+n
-+b repl
-+:more1
-+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-+p
-+g
-+s/.\{148\}//
-+t nl
-+:delim
-+h
-+s/\(.\{148\}\)..*/\1/
-+t more2
-+s/["\\]/\\&/g; s/^/"/; s/$/"/
-+p
-+b
-+:more2
-+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-+p
-+g
-+s/.\{148\}//
-+t delim
-+' <conf$$subs.awk | sed '
-+/^[^""]/{
-+ N
-+ s/\n//
-+}
-+' >>$CONFIG_STATUS || ac_write_fail=1
-+rm -f conf$$subs.awk
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+_ACAWK
-+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
-+ for (key in S) S_is_set[key] = 1
-+ FS = ""
-+
-+}
- {
-- echo "$me: cannot create a temporary directory in ." >&2
-- { (exit 1); exit 1; }
-+ line = $ 0
-+ nfields = split(line, field, "@")
-+ substed = 0
-+ len = length(field[1])
-+ for (i = 2; i < nfields; i++) {
-+ key = field[i]
-+ keylen = length(key)
-+ if (S_is_set[key]) {
-+ value = S[key]
-+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-+ len += length(value) + length(field[++i])
-+ substed = 1
-+ } else
-+ len += 1 + keylen
-+ }
-+
-+ print line
- }
-
-+_ACAWK
- _ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-+else
-+ cat
-+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-+_ACEOF
-+
-+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-+h
-+s///
-+s/^/:/
-+s/[ ]*$/:/
-+s/:\$(srcdir):/:/g
-+s/:\${srcdir}:/:/g
-+s/:@srcdir@:/:/g
-+s/^:*//
-+s/:*$//
-+x
-+s/\(=[ ]*\).*/\1/
-+G
-+s/\n//
-+s/^[^=]*=[ ]*$//
-+}'
-+fi
-
--cat >>$CONFIG_STATUS <<_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+fi # test -n "$CONFIG_FILES"
-
--#
--# CONFIG_FILES section.
--#
-
--# No need to generate the scripts if there are no CONFIG_FILES.
--# This happens for instance when ./config.status config.h
--if test -n "\$CONFIG_FILES"; then
-- # Protect against being on the right side of a sed subst in config.status.
-- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
--s, at SHELL@,$SHELL,;t t
--s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
--s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
--s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
--s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
--s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
--s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
--s, at exec_prefix@,$exec_prefix,;t t
--s, at prefix@,$prefix,;t t
--s, at program_transform_name@,$program_transform_name,;t t
--s, at bindir@,$bindir,;t t
--s, at sbindir@,$sbindir,;t t
--s, at libexecdir@,$libexecdir,;t t
--s, at datadir@,$datadir,;t t
--s, at sysconfdir@,$sysconfdir,;t t
--s, at sharedstatedir@,$sharedstatedir,;t t
--s, at localstatedir@,$localstatedir,;t t
--s, at libdir@,$libdir,;t t
--s, at includedir@,$includedir,;t t
--s, at oldincludedir@,$oldincludedir,;t t
--s, at infodir@,$infodir,;t t
--s, at mandir@,$mandir,;t t
--s, at build_alias@,$build_alias,;t t
--s, at host_alias@,$host_alias,;t t
--s, at target_alias@,$target_alias,;t t
--s, at DEFS@,$DEFS,;t t
--s, at ECHO_C@,$ECHO_C,;t t
--s, at ECHO_N@,$ECHO_N,;t t
--s, at ECHO_T@,$ECHO_T,;t t
--s, at LIBS@,$LIBS,;t t
--s, at build@,$build,;t t
--s, at build_cpu@,$build_cpu,;t t
--s, at build_vendor@,$build_vendor,;t t
--s, at build_os@,$build_os,;t t
--s, at host@,$host,;t t
--s, at host_cpu@,$host_cpu,;t t
--s, at host_vendor@,$host_vendor,;t t
--s, at host_os@,$host_os,;t t
--s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
--s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
--s, at INSTALL_DATA@,$INSTALL_DATA,;t t
--s, at CYGPATH_W@,$CYGPATH_W,;t t
--s, at PACKAGE@,$PACKAGE,;t t
--s, at VERSION@,$VERSION,;t t
--s, at ACLOCAL@,$ACLOCAL,;t t
--s, at AUTOCONF@,$AUTOCONF,;t t
--s, at AUTOMAKE@,$AUTOMAKE,;t t
--s, at AUTOHEADER@,$AUTOHEADER,;t t
--s, at MAKEINFO@,$MAKEINFO,;t t
--s, at install_sh@,$install_sh,;t t
--s, at STRIP@,$STRIP,;t t
--s, at ac_ct_STRIP@,$ac_ct_STRIP,;t t
--s, at INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
--s, at mkdir_p@,$mkdir_p,;t t
--s, at AWK@,$AWK,;t t
--s, at SET_MAKE@,$SET_MAKE,;t t
--s, at am__leading_dot@,$am__leading_dot,;t t
--s, at AMTAR@,$AMTAR,;t t
--s, at am__tar@,$am__tar,;t t
--s, at am__untar@,$am__untar,;t t
--s, at CC@,$CC,;t t
--s, at CFLAGS@,$CFLAGS,;t t
--s, at LDFLAGS@,$LDFLAGS,;t t
--s, at CPPFLAGS@,$CPPFLAGS,;t t
--s, at ac_ct_CC@,$ac_ct_CC,;t t
--s, at EXEEXT@,$EXEEXT,;t t
--s, at OBJEXT@,$OBJEXT,;t t
--s, at DEPDIR@,$DEPDIR,;t t
--s, at am__include@,$am__include,;t t
--s, at am__quote@,$am__quote,;t t
--s, at AMDEP_TRUE@,$AMDEP_TRUE,;t t
--s, at AMDEP_FALSE@,$AMDEP_FALSE,;t t
--s, at AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
--s, at CCDEPMODE@,$CCDEPMODE,;t t
--s, at am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
--s, at am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
--s, at myshell@,$myshell,;t t
--s, at myjade@,$myjade,;t t
--s, at myperl@,$myperl,;t t
--s, at myxsltproc@,$myxsltproc,;t t
--s, at myxmlcatalog@,$myxmlcatalog,;t t
--s, at mydtdparse@,$mydtdparse,;t t
--s, at mydtdformat@,$mydtdformat,;t t
--s, at mysgrep@,$mysgrep,;t t
--s, at mytidy@,$mytidy,;t t
--s, at mybatik@,$mybatik,;t t
--s, at svnversioncommand@,$svnversioncommand,;t t
--s, at HAVEBATIK_TRUE@,$HAVEBATIK_TRUE,;t t
--s, at HAVEBATIK_FALSE@,$HAVEBATIK_FALSE,;t t
--s, at HAVESERVER_TRUE@,$HAVESERVER_TRUE,;t t
--s, at HAVESERVER_FALSE@,$HAVESERVER_FALSE,;t t
--s, at HAVESVNWC_TRUE@,$HAVESVNWC_TRUE,;t t
--s, at HAVESVNWC_FALSE@,$HAVESVNWC_FALSE,;t t
--s, at LIBICONV@,$LIBICONV,;t t
--s, at LTLIBICONV@,$LTLIBICONV,;t t
--s, at CPP@,$CPP,;t t
--s, at EGREP@,$EGREP,;t t
--s, at refdba_LDADD@,$refdba_LDADD,;t t
--s, at refdbc_LDADD@,$refdbc_LDADD,;t t
--s, at refdbd_LDADD@,$refdbd_LDADD,;t t
--s, at bib2ris_LDADD@,$bib2ris_LDADD,;t t
--s, at BIB2RIS@,$BIB2RIS,;t t
--s, at mysvnversion@,$mysvnversion,;t t
--s, at sgml_decl@,$sgml_decl,;t t
--s, at xml_decl@,$xml_decl,;t t
--s, at docbk_xsl@,$docbk_xsl,;t t
--s, at docbk_xsl_ns@,$docbk_xsl_ns,;t t
--s, at tei_xsl@,$tei_xsl,;t t
--s, at tei_xsl_ns@,$tei_xsl_ns,;t t
--s, at classpath_root@,$classpath_root,;t t
--s, at log_dir@,$log_dir,;t t
--s, at var_dir@,$var_dir,;t t
--s, at main_db@,$main_db,;t t
--s, at db_dir@,$db_dir,;t t
--s, at ULLSPEC@,$ULLSPEC,;t t
--s, at psarg@,$psarg,;t t
--s, at trang_cmd@,$trang_cmd,;t t
--s, at server_subdirs@,$server_subdirs,;t t
--s, at client_subdirs@,$client_subdirs,;t t
--s, at docs_subdirs@,$docs_subdirs,;t t
--s, at man_subdirs@,$man_subdirs,;t t
--s, at server_bins@,$server_bins,;t t
--s, at client_bins@,$client_bins,;t t
--s, at server_scripts@,$server_scripts,;t t
--s, at client_scripts@,$client_scripts,;t t
--s, at server_etc_objects@,$server_etc_objects,;t t
--s, at client_etc_objects@,$client_etc_objects,;t t
--s, at server_etc_distobjects@,$server_etc_distobjects,;t t
--s, at client_etc_distobjects@,$client_etc_distobjects,;t t
--s, at server_mans@,$server_mans,;t t
--s, at server8_mans@,$server8_mans,;t t
--s, at client_mans@,$client_mans,;t t
--s, at client1_mans@,$client1_mans,;t t
--s, at LIBOBJS@,$LIBOBJS,;t t
--s, at LTLIBOBJS@,$LTLIBOBJS,;t t
--CEOF
--
--_ACEOF
--
-- cat >>$CONFIG_STATUS <<\_ACEOF
-- # Split the substitutions into bite-sized pieces for seds with
-- # small command number limits, like on Digital OSF/1 and HP-UX.
-- ac_max_sed_lines=48
-- ac_sed_frag=1 # Number of current file.
-- ac_beg=1 # First line for current file.
-- ac_end=$ac_max_sed_lines # Line after last line for current file.
-- ac_more_lines=:
-- ac_sed_cmds=
-- while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- else
-- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- fi
-- if test ! -s $tmp/subs.frag; then
-- ac_more_lines=false
-- else
-- # The purpose of the label and of the branching condition is to
-- # speed up the sed processing (if there are no `@' at all, there
-- # is no need to browse any of the substitutions).
-- # These are the two extra sed commands mentioned above.
-- (echo ':t
-- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-- fi
-- ac_sed_frag=`expr $ac_sed_frag + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_lines`
-+eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
-+shift
-+for ac_tag
-+do
-+ case $ac_tag in
-+ :[FHLC]) ac_mode=$ac_tag; continue;;
-+ esac
-+ case $ac_mode$ac_tag in
-+ :[FHL]*:*);;
-+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
-+ :[FH]-) ac_tag=-:-;;
-+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+ esac
-+ ac_save_IFS=$IFS
-+ IFS=:
-+ set x $ac_tag
-+ IFS=$ac_save_IFS
-+ shift
-+ ac_file=$1
-+ shift
-+
-+ case $ac_mode in
-+ :L) ac_source=$1;;
-+ :[FH])
-+ ac_file_inputs=
-+ for ac_f
-+ do
-+ case $ac_f in
-+ -) ac_f="$tmp/stdin";;
-+ *) # Look for the file first in the build tree, then in the source tree
-+ # (if the path is not absolute). The absolute path cannot be DOS-style,
-+ # because $ac_f cannot contain `:'.
-+ test -f "$ac_f" ||
-+ case $ac_f in
-+ [\\/$]*) false;;
-+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+ esac ||
-+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
-+ esac
-+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-+ as_fn_append ac_file_inputs " '$ac_f'"
-+ done
-+
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ configure_input='Generated from '`
-+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-+ `' by configure.'
-+ if test x"$ac_file" != x-; then
-+ configure_input="$ac_file. $configure_input"
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-+$as_echo "$as_me: creating $ac_file" >&6;}
- fi
-- done
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
-- fi
--fi # test -n "$CONFIG_FILES"
-+ # Neutralize special characters interpreted by sed in replacement strings.
-+ case $configure_input in #(
-+ *\&* | *\|* | *\\* )
-+ ac_sed_conf_input=`$as_echo "$configure_input" |
-+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
-+ *) ac_sed_conf_input=$configure_input;;
-+ esac
-
--_ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
--for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case $ac_file in
-- - | *:- | *:-:* ) # input from stdin
-- cat >$tmp/stdin
-- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- * ) ac_file_in=$ac_file.in ;;
-+ case $ac_tag in
-+ *:-:* | *:-) cat >"$tmp/stdin" \
-+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-+ esac
-+ ;;
- esac
-
-- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+ ac_dir=`$as_dirname -- "$ac_file" ||
- $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
-- X"$ac_file" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$ac_file" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- { if $as_mkdir_p; then
-- mkdir -p "$ac_dir"
-- else
-- as_dir="$ac_dir"
-- as_dirs=
-- while test ! -d "$as_dir"; do
-- as_dirs="$as_dir $as_dirs"
-- as_dir=`(dirname "$as_dir") 2>/dev/null ||
--$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X"$as_dir" : 'X\(//\)[^/]' \| \
-- X"$as_dir" : 'X\(//\)$' \| \
-- X"$as_dir" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$as_dir" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- done
-- test ! -n "$as_dirs" || mkdir $as_dirs
-- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
--echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-- { (exit 1); exit 1; }; }; }
--
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
--esac
-
-+ case $ac_mode in
-+ :F)
-+ #
-+ # CONFIG_FILE
-+ #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-+_ACEOF
-
-- if test x"$ac_file" != x-; then
-- { echo "$as_me:$LINENO: creating $ac_file" >&5
--echo "$as_me: creating $ac_file" >&6;}
-- rm -f "$ac_file"
-- fi
-- # Let's still pretend it is `configure' which instantiates (i.e., don't
-- # use $as_me), people would be surprised to read:
-- # /* config.h. Generated by config.status. */
-- if test x"$ac_file" = x-; then
-- configure_input=
-- else
-- configure_input="$ac_file. "
-- fi
-- configure_input=$configure_input"Generated from `echo $ac_file_in |
-- sed 's,.*/,,'` by configure."
--
-- # First look for the input files in the build tree, otherwise in the
-- # src tree.
-- ac_file_inputs=`IFS=:
-- for f in $ac_file_in; do
-- case $f in
-- -) echo $tmp/stdin ;;
-- [\\/$]*)
-- # Absolute (can't be DOS-style, as IFS=:)
-- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- echo "$f";;
-- *) # Relative
-- if test -f "$f"; then
-- # Build tree
-- echo "$f"
-- elif test -f "$srcdir/$f"; then
-- # Source tree
-- echo "$srcdir/$f"
-- else
-- # /dev/null tree
-- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- fi;;
-- esac
-- done` || { (exit 1); exit 1; }
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+ac_sed_dataroot='
-+/datarootdir/ {
-+ p
-+ q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p'
-+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+ ac_datarootdir_hack='
-+ s&@datadir@&$datadir&g
-+ s&@docdir@&$docdir&g
-+ s&@infodir@&$infodir&g
-+ s&@localedir@&$localedir&g
-+ s&@mandir@&$mandir&g
-+ s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
- _ACEOF
--cat >>$CONFIG_STATUS <<_ACEOF
-- sed "$ac_vpsub
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+ac_sed_extra="$ac_vpsub
- $extrasub
- _ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- :t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
--s, at configure_input@,$configure_input,;t t
--s, at srcdir@,$ac_srcdir,;t t
--s, at abs_srcdir@,$ac_abs_srcdir,;t t
--s, at top_srcdir@,$ac_top_srcdir,;t t
--s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
--s, at builddir@,$ac_builddir,;t t
--s, at abs_builddir@,$ac_abs_builddir,;t t
--s, at top_builddir@,$ac_top_builddir,;t t
--s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
--s, at INSTALL@,$ac_INSTALL,;t t
--" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-- rm -f $tmp/stdin
-- if test x"$ac_file" != x-; then
-- mv $tmp/out $ac_file
-- else
-- cat $tmp/out
-- rm -f $tmp/out
-- fi
--
--done
--_ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
--
--#
--# CONFIG_COMMANDS section.
--#
--for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
--$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X"$ac_dest" : 'X\(//\)[^/]' \| \
-- X"$ac_dest" : 'X\(//\)$' \| \
-- X"$ac_dest" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$ac_dest" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- { if $as_mkdir_p; then
-- mkdir -p "$ac_dir"
-- else
-- as_dir="$ac_dir"
-- as_dirs=
-- while test ! -d "$as_dir"; do
-- as_dirs="$as_dir $as_dirs"
-- as_dir=`(dirname "$as_dir") 2>/dev/null ||
--$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X"$as_dir" : 'X\(//\)[^/]' \| \
-- X"$as_dir" : 'X\(//\)$' \| \
-- X"$as_dir" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$as_dir" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- done
-- test ! -n "$as_dirs" || mkdir $as_dirs
-- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
--echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-- { (exit 1); exit 1; }; }; }
--
-- ac_builddir=.
-+s|@configure_input@|$ac_sed_conf_input|;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@top_build_prefix@&$ac_top_build_prefix&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+s&@INSTALL@&$ac_INSTALL&;t t
-+$ac_datarootdir_hack
-+"
-+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined" >&5
-+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined" >&2;}
-
--if test "$ac_dir" != .; then
-- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+ rm -f "$tmp/stdin"
-+ case $ac_file in
-+ -) cat "$tmp/out" && rm -f "$tmp/out";;
-+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
-+ esac \
-+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-+ ;;
-
--case $srcdir in
-- .) # No --srcdir option. We are building in place.
-- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
--esac
-
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
--esac
-+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-+$as_echo "$as_me: executing $ac_file commands" >&6;}
-+ ;;
-+ esac
-
-
-- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
--echo "$as_me: executing $ac_dest commands" >&6;}
-- case $ac_dest in
-- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-+ case $ac_file$ac_mode in
-+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
-@@ -8887,18 +8330,29 @@ echo "$as_me: executing $ac_dest command
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-- dirpart=`(dirname "$mf") 2>/dev/null ||
-+ dirpart=`$as_dirname -- "$mf" ||
- $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
-- X"$mf" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$mf" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$mf" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
- else
- continue
- fi
-@@ -8920,59 +8374,47 @@ echo X"$mf" |
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
-- fdir=`(dirname "$file") 2>/dev/null ||
-+ fdir=`$as_dirname -- "$file" ||
- $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
-- X"$file" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$file" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- { if $as_mkdir_p; then
-- mkdir -p $dirpart/$fdir
-- else
-- as_dir=$dirpart/$fdir
-- as_dirs=
-- while test ! -d "$as_dir"; do
-- as_dirs="$as_dir $as_dirs"
-- as_dir=`(dirname "$as_dir") 2>/dev/null ||
--$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X"$as_dir" : 'X\(//\)[^/]' \| \
-- X"$as_dir" : 'X\(//\)$' \| \
-- X"$as_dir" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
--echo X"$as_dir" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- done
-- test ! -n "$as_dirs" || mkdir $as_dirs
-- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
--echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
-- { (exit 1); exit 1; }; }; }
--
-+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
- ;;
-+
- esac
--done
--_ACEOF
-+done # for ac_tag
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-
--{ (exit 0); exit 0; }
-+as_fn_exit 0
- _ACEOF
--chmod +x $CONFIG_STATUS
- ac_clean_files=$ac_clean_files_save
-
-+test $ac_write_fail = 0 ||
-+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-+
-
- # configure is writing to config.log, and then calls config.status.
- # config.status does its own redirection, appending to config.log.
-@@ -8992,7 +8434,11 @@ if test "$no_create" != yes; then
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
-- $ac_cs_success || { (exit 1); exit 1; }
-+ $ac_cs_success || as_fn_exit 1
-+fi
-+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
- fi
-
-
Modified: packages/refdb/trunk/debian/patches/removegetopt.patch
URL: http://svn.debian.org/wsvn/debian-xml-sgml/packages/refdb/trunk/debian/patches/removegetopt.patch?rev=2143&op=diff
==============================================================================
--- packages/refdb/trunk/debian/patches/removegetopt.patch (original)
+++ packages/refdb/trunk/debian/patches/removegetopt.patch Thu Jan 10 11:22:31 2013
@@ -2,10 +2,10 @@
Author: Mathieu Malaterre <malat at debian.org>
Forwarded: not-needed
-Index: refdb-0.9.9-1/src/Makefile.am
+Index: refdb-0.9.9/src/Makefile.am
===================================================================
---- refdb-0.9.9-1.orig/src/Makefile.am 2012-10-03 11:24:27.927494564 +0200
-+++ refdb-0.9.9-1/src/Makefile.am 2012-10-03 11:24:53.931493625 +0200
+--- refdb-0.9.9.orig/src/Makefile.am 2013-01-10 11:19:39.208207737 +0000
++++ refdb-0.9.9/src/Makefile.am 2013-01-10 11:19:39.204207738 +0000
@@ -12,19 +12,19 @@
CITESTYLEXVERSION = $(shell grep DOCTYPE $(srcdir)/../dtd/citestylex.dtd | sed 's%.*V\([^/]*\).*%\1%')
CITATIONLISTXVERSION = $(shell grep DOCTYPE $(srcdir)/../dtd/citationlistx.dtd | sed 's%.*V\([^/]*\).*%\1%')
@@ -33,10 +33,10 @@
refdba_LDADD = @refdba_LDADD@
refdbc_LDADD = @refdbc_LDADD@
-Index: refdb-0.9.9-1/src/Makefile.in
+Index: refdb-0.9.9/src/Makefile.in
===================================================================
---- refdb-0.9.9-1.orig/src/Makefile.in 2012-10-03 11:24:27.399494583 +0200
-+++ refdb-0.9.9-1/src/Makefile.in 2012-10-03 11:24:53.935493625 +0200
+--- refdb-0.9.9.orig/src/Makefile.in 2013-01-10 11:19:39.208207737 +0000
++++ refdb-0.9.9/src/Makefile.in 2013-01-10 11:19:39.204207738 +0000
@@ -52,18 +52,18 @@
am__installdirs = "$(DESTDIR)$(bindir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
@@ -95,7 +95,7 @@
strfncs.$(OBJEXT) svn_version.$(OBJEXT)
refdbxp_OBJECTS = $(am_refdbxp_OBJECTS)
refdbxp_LDADD = $(LDADD)
-@@ -268,11 +268,11 @@
+@@ -276,11 +276,11 @@
XNOTEVERSION = $(shell grep DOCTYPE $(srcdir)/../dtd/xnote.dtd | sed 's%.*V\([^/]*\).*%\1%')
CITESTYLEXVERSION = $(shell grep DOCTYPE $(srcdir)/../dtd/citestylex.dtd | sed 's%.*V\([^/]*\).*%\1%')
CITATIONLISTXVERSION = $(shell grep DOCTYPE $(srcdir)/../dtd/citationlistx.dtd | sed 's%.*V\([^/]*\).*%\1%')
@@ -111,7 +111,7 @@
readris.c backend.c backend-scrn.c backend-ris.c \
backend-risx.c backend-mods.c backend-db31.c backend-teix.c \
backend-bibtex.c backend-html.c backend-dbib.c backend-dbiba.c \
-@@ -282,7 +282,7 @@
+@@ -290,7 +290,7 @@
backendn-notex.c backendn-html.c xmlhelper.c mset.c \
refdbdgetref.c refdbdgetrefx.c refdbdupdb.c passwd.c \
refdbdcheckref.c svn_version.c refdb.h refdbd.h pref.h \
@@ -120,7 +120,7 @@
readris.h backend.h backend-scrn.h backend-ris.h \
backend-risx.h backend-mods.h backend-db31.h backend-teix.h \
backend-bibtex.h backend-html.h backend-dbib.h \
-@@ -292,9 +292,9 @@
+@@ -300,9 +300,9 @@
xmlhelper.h backendn-html.h mset.h refdbdgetref.h \
refdbdgetrefx.h refdbdupdb.h passwd.h refdbdgetref.h \
refdbdcheckref.h outformats.h
@@ -133,7 +133,7 @@
main_meta = @main_meta@
AM_CPPFLAGS = -DSYSCONFDIR=\"$(sysconfdir)/@PACKAGE@\" -DULLSPEC=\"@ULLSPEC@\"
all: $(BUILT_SOURCES)
-@@ -406,7 +406,6 @@
+@@ -414,7 +414,6 @@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/dbfncs.Po at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/eenc.Po at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/enigma.Po at am__quote@
More information about the debian-xml-sgml-commit
mailing list