r3618 - in trunk/kernel/source/linux-2.6/debian: arch arch/m68k
arch/m68k/amiga arch/m68k/atari arch/m68k/bvme6000
arch/m68k/hp arch/m68k/mvme147 arch/m68k/mvme16x
arch/m68k/sun3 patches-arch
Christian T. Steigies
cts at costa.debian.org
Thu Jul 28 22:53:32 UTC 2005
Author: cts
Date: 2005-07-28 22:53:23 +0000 (Thu, 28 Jul 2005)
New Revision: 3618
Added:
trunk/kernel/source/linux-2.6/debian/arch/m68k/
trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/
trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/desc
trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/
trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/desc
trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/
trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/desc
trunk/kernel/source/linux-2.6/debian/arch/m68k/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/
trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/desc
trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/
trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/desc
trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/
trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/desc
trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/
trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/config
trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/desc
trunk/kernel/source/linux-2.6/debian/patches-arch/m68k.diff
Log:
add m68k support
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,1014 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 22:31:34 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+CONFIG_AMIGA=y
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+# CONFIG_VME is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_M68KFPU_EMU_EXTRAPREC=y
+# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_ZORRO=y
+CONFIG_AMIGA_PCMCIA=y
+# CONFIG_HEARTBEAT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZORRO_NAMES=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_AMIGA_Z2RAM=y
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_IDEDOUBLER=y
+CONFIG_BLK_DEV_BUDDHA=y
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_CYBERSTORM_SCSI=y
+CONFIG_CYBERSTORMII_SCSI=y
+CONFIG_BLZ2060_SCSI=y
+CONFIG_BLZ1230_SCSI=y
+CONFIG_FASTLANE_SCSI=y
+CONFIG_SCSI_AMIGA7XX=y
+CONFIG_OKTAGON_SCSI=y
+# CONFIG_SCSI_NCR53C7xx_FAST is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ARIADNE=m
+CONFIG_A2065=m
+CONFIG_HYDRA=m
+CONFIG_ZORRO8390=m
+CONFIG_APNE=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_AMIGA=y
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_AMIGA=y
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+CONFIG_JOYSTICK_AMIGA=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_A2232=m
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_AMIGA=y
+CONFIG_FB_AMIGA_OCS=y
+CONFIG_FB_AMIGA_ECS=y
+CONFIG_FB_AMIGA_AGA=y
+# CONFIG_FB_CYBER is not set
+# CONFIG_FB_VIRGE is not set
+# CONFIG_FB_RETINAZ3 is not set
+CONFIG_FB_FM2=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_PEARL_8x8=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_PAULA=m
+CONFIG_DMASOUND=m
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+CONFIG_AMIGA_BUILTIN_SERIAL=y
+# CONFIG_WHIPPET_SERIAL is not set
+CONFIG_MULTIFACE_III_TTY=m
+# CONFIG_SERIAL_CONSOLE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=y
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/amiga/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="Amiga computers"
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,911 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 23:00:04 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+# CONFIG_AMIGA is not set
+CONFIG_ATARI=y
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+# CONFIG_VME is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_M68KFPU_EMU_EXTRAPREC=y
+# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_STRAM_PROC=y
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_ATARI_FLOPPY=y
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_FALCON_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_ATARI=m
+CONFIG_DMASOUND=m
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+CONFIG_ATARI_MFPSER=m
+CONFIG_ATARI_SCC=y
+CONFIG_ATARI_SCC_DMA=y
+CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_DSP56K=m
+# CONFIG_SERIAL_CONSOLE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_ATARI_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/atari/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="Atari computers"
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,857 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 23:01:13 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+# CONFIG_AMIGA is not set
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+CONFIG_VME=y
+# CONFIG_MVME147 is not set
+# CONFIG_MVME16x is not set
+CONFIG_BVME6000=y
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+# CONFIG_M68020 is not set
+# CONFIG_M68030 is not set
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+# CONFIG_M68KFPU_EMU is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_PROC_HARDWARE=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_NCR53C7xx_FAST is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_BVME6000_NET=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+CONFIG_BVME6000_SCC=y
+CONFIG_SERIAL_CONSOLE=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/bvme6000/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="BVM BVME4000 and BVME6000 SBCs"
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,1014 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 22:31:34 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+CONFIG_AMIGA=y
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+# CONFIG_VME is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_M68KFPU_EMU_EXTRAPREC=y
+# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_ZORRO=y
+CONFIG_AMIGA_PCMCIA=y
+# CONFIG_HEARTBEAT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZORRO_NAMES=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_AMIGA_Z2RAM=y
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_IDEDOUBLER=y
+CONFIG_BLK_DEV_BUDDHA=y
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_CYBERSTORM_SCSI=y
+CONFIG_CYBERSTORMII_SCSI=y
+CONFIG_BLZ2060_SCSI=y
+CONFIG_BLZ1230_SCSI=y
+CONFIG_FASTLANE_SCSI=y
+CONFIG_SCSI_AMIGA7XX=y
+CONFIG_OKTAGON_SCSI=y
+# CONFIG_SCSI_NCR53C7xx_FAST is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ARIADNE=m
+CONFIG_A2065=m
+CONFIG_HYDRA=m
+CONFIG_ZORRO8390=m
+CONFIG_APNE=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_AMIGA=y
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_AMIGA=y
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+CONFIG_JOYSTICK_AMIGA=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_A2232=m
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_AMIGA=y
+CONFIG_FB_AMIGA_OCS=y
+CONFIG_FB_AMIGA_ECS=y
+CONFIG_FB_AMIGA_AGA=y
+# CONFIG_FB_CYBER is not set
+# CONFIG_FB_VIRGE is not set
+# CONFIG_FB_RETINAZ3 is not set
+CONFIG_FB_FM2=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_PEARL_8x8=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_PAULA=m
+CONFIG_DMASOUND=m
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+CONFIG_AMIGA_BUILTIN_SERIAL=y
+# CONFIG_WHIPPET_SERIAL is not set
+CONFIG_MULTIFACE_III_TTY=m
+# CONFIG_SERIAL_CONSOLE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=y
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,848 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 23:02:09 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+# CONFIG_AMIGA is not set
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+# CONFIG_VME is not set
+CONFIG_HP300=y
+# CONFIG_DIO is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_M68KFPU_EMU_EXTRAPREC=y
+# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/hp/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="hp computers"
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,875 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 23:01:33 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+# CONFIG_AMIGA is not set
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+CONFIG_VME=y
+CONFIG_MVME147=y
+# CONFIG_MVME16x is not set
+# CONFIG_BVME6000 is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+# CONFIG_M68020 is not set
+CONFIG_M68030=y
+# CONFIG_M68040 is not set
+# CONFIG_M68060 is not set
+CONFIG_MMU_MOTOROLA=y
+# CONFIG_M68KFPU_EMU is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_PROC_HARDWARE=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME147_SCSI=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MVME147_NET=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+CONFIG_MVME147_SCC=y
+CONFIG_SERIAL_CONSOLE=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme147/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="Motorola MVME147 SBCs"
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,880 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 23:01:51 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+# CONFIG_AMIGA is not set
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+CONFIG_VME=y
+# CONFIG_MVME147 is not set
+CONFIG_MVME16x=y
+# CONFIG_BVME6000 is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
+
+#
+# Processor type
+#
+# CONFIG_M68020 is not set
+# CONFIG_M68030 is not set
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+# CONFIG_M68KFPU_EMU is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_PROC_HARDWARE=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_NCR53C7xx_FAST is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MVME16x_NET=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+# CONFIG_SERIAL167 is not set
+CONFIG_MVME162_SCC=y
+CONFIG_SERIAL_CONSOLE=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/mvme16x/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="Motorola MVME162/6/7, MVME172/7 SBCs"
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/config
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/config 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/config 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,862 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Thu Jul 28 23:02:29 2005
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Platform dependent setup
+#
+CONFIG_SUN3=y
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_MMU_SUN3=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_M68KFPU_EMU_EXTRAPREC=y
+# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_ADVANCED is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_PROC_HARDWARE=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_SUN3LANCE=y
+CONFIG_SUN3_82586=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# Character devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ASFS_FS=m
+CONFIG_ASFS_DEFAULT_CODEPAGE=""
+# CONFIG_ASFS_RW is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+CONFIG_UFS_FS_WRITE=y
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_SUN_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
Added: trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/desc
===================================================================
--- trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/desc 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/arch/m68k/sun3/desc 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1 @@
+class="sun3 computers"
Added: trunk/kernel/source/linux-2.6/debian/patches-arch/m68k.diff
===================================================================
--- trunk/kernel/source/linux-2.6/debian/patches-arch/m68k.diff 2005-07-28 05:32:19 UTC (rev 3617)
+++ trunk/kernel/source/linux-2.6/debian/patches-arch/m68k.diff 2005-07-28 22:53:23 UTC (rev 3618)
@@ -0,0 +1,5186 @@
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/Makefile linux-2.6.12/Makefile
+--- linux-2.6.12-i386/Makefile 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/Makefile 2005-06-19 16:31:23.000000000 +0200
+@@ -190,7 +190,7 @@
+ # Default value for CROSS_COMPILE is not to prefix executables
+ # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+
+-ARCH ?= $(SUBARCH)
++ARCH ?= m68k
+ CROSS_COMPILE ?=
+
+ # Architecture as present in compile.h
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/fpsp040/skeleton.S linux-2.6.12/arch/m68k/fpsp040/skeleton.S
+--- linux-2.6.12-i386/arch/m68k/fpsp040/skeleton.S 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/fpsp040/skeleton.S 2005-05-30 16:31:21.000000000 +0200
+@@ -381,10 +381,8 @@
+ .Lnotkern:
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+- tstb %curptr@(TASK_NEEDRESCHED)
+- jne ret_from_exception | deliver signals,
+- | reschedule etc..
+- RESTORE_ALL
++ | deliver signals, reschedule etc..
++ jra ret_from_exception
+
+ |
+ | mem_write --- write to user or supervisor address space
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/ifpsp060/iskeleton.S linux-2.6.12/arch/m68k/ifpsp060/iskeleton.S
+--- linux-2.6.12-i386/arch/m68k/ifpsp060/iskeleton.S 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/ifpsp060/iskeleton.S 2005-05-30 16:31:22.000000000 +0200
+@@ -75,10 +75,8 @@
+ .Lnotkern:
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+- tstb %curptr@(TASK_NEEDRESCHED)
+- jne ret_from_exception | deliver signals,
+- | reschedule etc..
+- RESTORE_ALL
++ | deliver signals, reschedule etc..
++ jra ret_from_exception
+
+ |
+ | _060_real_chk():
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/kernel/asm-offsets.c linux-2.6.12/arch/m68k/kernel/asm-offsets.c
+--- linux-2.6.12-i386/arch/m68k/kernel/asm-offsets.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/kernel/asm-offsets.c 2005-05-30 16:31:22.000000000 +0200
+@@ -25,12 +25,8 @@
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+- DEFINE(TASK_WORK, offsetof(struct task_struct, thread.work));
+- DEFINE(TASK_NEEDRESCHED, offsetof(struct task_struct, thread.work.need_resched));
+- DEFINE(TASK_SYSCALL_TRACE, offsetof(struct task_struct, thread.work.syscall_trace));
+- DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, thread.work.sigpending));
+- DEFINE(TASK_NOTIFY_RESUME, offsetof(struct task_struct, thread.work.notify_resume));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
++ DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+
+@@ -45,6 +41,10 @@
+ DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl));
+ DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate));
+
++ /* offsets into the thread_info struct */
++ DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count));
++ DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
++
+ /* offsets into the pt_regs */
+ DEFINE(PT_D0, offsetof(struct pt_regs, d0));
+ DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/kernel/bios32.c linux-2.6.12/arch/m68k/kernel/bios32.c
+--- linux-2.6.12-i386/arch/m68k/kernel/bios32.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/kernel/bios32.c 2004-10-20 16:38:00.000000000 +0200
+@@ -285,7 +285,7 @@
+
+ DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
+
+- if (!bus->devices && !bus->children)
++ if (list_empty(&bus->devices) && list_empty(&bus->children))
+ return;
+
+ /*
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/kernel/entry.S linux-2.6.12/arch/m68k/kernel/entry.S
+--- linux-2.6.12-i386/arch/m68k/kernel/entry.S 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/kernel/entry.S 2005-05-30 16:31:22.000000000 +0200
+@@ -44,9 +44,7 @@
+
+ #include <asm/offsets.h>
+
+-.globl system_call, buserr, trap
+-.globl resume, ret_from_exception
+-.globl ret_from_signal
++.globl system_call, buserr, trap, resume
+ .globl inthandler, sys_call_table
+ .globl sys_fork, sys_clone, sys_vfork
+ .globl ret_from_interrupt, bad_interrupt
+@@ -58,7 +56,7 @@
+ movel %sp,%sp at - | stack frame pointer argument
+ bsrl buserr_c
+ addql #4,%sp
+- jra ret_from_exception
++ jra .Lret_from_exception
+
+ ENTRY(trap)
+ SAVE_ALL_INT
+@@ -66,7 +64,7 @@
+ movel %sp,%sp at - | stack frame pointer argument
+ bsrl trap_c
+ addql #4,%sp
+- jra ret_from_exception
++ jra .Lret_from_exception
+
+ | After a fork we jump here directly from resume,
+ | so that %d1 contains the previous task
+@@ -75,30 +73,31 @@
+ movel %d1,%sp at -
+ jsr schedule_tail
+ addql #4,%sp
+- jra ret_from_exception
++ jra .Lret_from_exception
+
+-badsys:
+- movel #-ENOSYS,%sp@(PT_D0)
+- jra ret_from_exception
+-
+-do_trace:
++do_trace_entry:
+ movel #-ENOSYS,%sp@(PT_D0) | needed for strace
+ subql #4,%sp
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+- movel %sp@(PT_ORIG_D0),%d1
+- movel #-ENOSYS,%d0
+- cmpl #NR_syscalls,%d1
+- jcc 1f
+- jbsr @(sys_call_table,%d1:l:4)@(0)
+-1: movel %d0,%sp@(PT_D0) | save the return value
+- subql #4,%sp | dummy return address
++ movel %sp@(PT_ORIG_D0),%d0
++ cmpl #NR_syscalls,%d0
++ jcs syscall
++badsys:
++ movel #-ENOSYS,%sp@(PT_D0)
++ jra ret_from_syscall
++
++do_trace_exit:
++ subql #4,%sp
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace
++ RESTORE_SWITCH_STACK
++ addql #4,%sp
++ jra .Lret_from_exception
+
+-ret_from_signal:
++ENTRY(ret_from_signal)
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ /* on 68040 complete pending writebacks if any */
+@@ -111,7 +110,7 @@
+ addql #4,%sp
+ 1:
+ #endif
+- jra ret_from_exception
++ jra .Lret_from_exception
+
+ ENTRY(system_call)
+ SAVE_ALL_SYS
+@@ -120,30 +119,34 @@
+ | save top of frame
+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+
+- tstb %curptr@(TASK_SYSCALL_TRACE)
+- jne do_trace
++ | syscall trace?
++ tstb %curptr@(TASK_INFO+TINFO_FLAGS+2)
++ jmi do_trace_entry
+ cmpl #NR_syscalls,%d0
+ jcc badsys
++syscall:
+ jbsr @(sys_call_table,%d0:l:4)@(0)
+ movel %d0,%sp@(PT_D0) | save the return value
+-
++ret_from_syscall:
+ |oriw #0x0700,%sr
+- movel %curptr@(TASK_WORK),%d0
++ movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
+ jne syscall_exit_work
+ 1: RESTORE_ALL
+
+ syscall_exit_work:
+ btst #5,%sp@(PT_SR) | check if returning to kernel
+ bnes 1b | if so, skip resched, signals
+- tstw %d0
+- jeq do_signal_return
+- tstb %d0
+- jne do_delayed_trace
+-
++ lslw #1,%d0
++ jcs do_trace_exit
++ jmi do_delayed_trace
++ lslw #8,%d0
++ jmi do_signal_return
+ pea resume_userspace
+- jmp schedule
++ jra schedule
++
+
+-ret_from_exception:
++ENTRY(ret_from_exception)
++.Lret_from_exception:
+ btst #5,%sp@(PT_SR) | check if returning to kernel
+ bnes 1f | if so, skip resched, signals
+ | only allow interrupts when we are really the last one on the
+@@ -152,19 +155,18 @@
+ andw #ALLOWINT,%sr
+
+ resume_userspace:
+- movel %curptr@(TASK_WORK),%d0
+- lsrl #8,%d0
++ moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
+ jne exit_work
+ 1: RESTORE_ALL
+
+ exit_work:
+ | save top of frame
+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+- tstb %d0
+- jeq do_signal_return
+-
++ lslb #1,%d0
++ jmi do_signal_return
+ pea resume_userspace
+- jmp schedule
++ jra schedule
++
+
+ do_signal_return:
+ |andw #ALLOWINT,%sr
+@@ -254,7 +256,7 @@
+
+ /* check if we need to do software interrupts */
+ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING
+- jeq ret_from_exception
++ jeq .Lret_from_exception
+ pea ret_from_exception
+ jra do_softirq
+
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/kernel/m68k_ksyms.c linux-2.6.12/arch/m68k/kernel/m68k_ksyms.c
+--- linux-2.6.12-i386/arch/m68k/kernel/m68k_ksyms.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/kernel/m68k_ksyms.c 2004-10-20 16:38:00.000000000 +0200
+@@ -46,6 +46,7 @@
+ EXPORT_SYMBOL(iounmap);
+ EXPORT_SYMBOL(kernel_set_cachemode);
+ #endif /* !CONFIG_SUN3 */
++EXPORT_SYMBOL(flush_icache_user_range);
+ EXPORT_SYMBOL(m68k_debug_device);
+ EXPORT_SYMBOL(mach_hwclk);
+ EXPORT_SYMBOL(mach_get_ss);
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/kernel/process.c linux-2.6.12/arch/m68k/kernel/process.c
+--- linux-2.6.12-i386/arch/m68k/kernel/process.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/kernel/process.c 2004-10-20 16:38:00.000000000 +0200
+@@ -245,7 +245,7 @@
+ unsigned long stack_offset, *retp;
+
+ stack_offset = THREAD_SIZE - sizeof(struct pt_regs);
+- childregs = (struct pt_regs *) ((unsigned long) (p->thread_info) + stack_offset);
++ childregs = (struct pt_regs *) ((unsigned long) (p->stack) + stack_offset);
+
+ *childregs = *regs;
+ childregs->d0 = 0;
+@@ -390,7 +390,7 @@
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+- stack_page = (unsigned long)(p->thread_info);
++ stack_page = (unsigned long)(p->stack);
+ fp = ((struct switch_stack *)p->thread.ksp)->a6;
+ do {
+ if (fp < stack_page+sizeof(struct thread_info) ||
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/kernel/ptrace.c linux-2.6.12/arch/m68k/kernel/ptrace.c
+--- linux-2.6.12-i386/arch/m68k/kernel/ptrace.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/kernel/ptrace.c 2005-06-19 16:32:04.000000000 +0200
+@@ -95,7 +95,7 @@
+ if (regno == PT_USP)
+ addr = &task->thread.usp;
+ else if (regno < sizeof(regoff)/sizeof(regoff[0]))
+- addr = (unsigned long *) (task->thread.esp0 + regoff[regno]);
++ addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
+ else
+ return -1;
+ *addr = data;
+@@ -103,48 +103,56 @@
+ }
+
+ /*
+- * Called by kernel/ptrace.c when detaching..
+- *
+ * Make sure the single step bit is not set.
+ */
+-void ptrace_disable(struct task_struct *child)
++static inline void singlestep_disable(struct task_struct *child)
+ {
+- unsigned long tmp;
+- /* make sure the single step bit is not set. */
+- tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
++ unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+ put_reg(child, PT_SR, tmp);
+- child->thread.work.delayed_trace = 0;
+- child->thread.work.syscall_trace = 0;
++ clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
++}
++
++/*
++ * Called by kernel/ptrace.c when detaching..
++ */
++void ptrace_disable(struct task_struct *child)
++{
++ singlestep_disable(child);
++ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+
+ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+ {
+ struct task_struct *child;
+- int ret;
++ unsigned long tmp;
++ int i, ret = 0;
+
+ lock_kernel();
+- ret = -EPERM;
+ if (request == PTRACE_TRACEME) {
+ /* are we already being traced? */
+- if (current->ptrace & PT_PTRACED)
++ if (current->ptrace & PT_PTRACED) {
++ ret = -EPERM;
+ goto out;
++ }
+ /* set the ptrace bit in the process flags. */
+ current->ptrace |= PT_PTRACED;
+- ret = 0;
+ goto out;
+ }
+- ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ child = find_task_by_pid(pid);
+ if (child)
+ get_task_struct(child);
+ read_unlock(&tasklist_lock);
+- if (!child)
++ if (unlikely(!child)) {
++ ret = -ESRCH;
+ goto out;
++ }
+
+- ret = -EPERM;
+- if (pid == 1) /* you may not mess with init */
++ /* you may not mess with init */
++ if (unlikely(pid == 1)) {
++ ret = -EPERM;
+ goto out_tsk;
++ }
+
+ if (request == PTRACE_ATTACH) {
+ ret = ptrace_attach(child);
+@@ -152,234 +160,175 @@
+ }
+
+ ret = ptrace_check_attach(child, request == PTRACE_KILL);
+- if (ret < 0)
++ if (ret)
+ goto out_tsk;
+
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+- case PTRACE_PEEKTEXT: /* read word at location addr. */
+- case PTRACE_PEEKDATA: {
+- unsigned long tmp;
+- int copied;
+-
+- copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+- ret = -EIO;
+- if (copied != sizeof(tmp))
+- break;
+- ret = put_user(tmp,(unsigned long *) data);
+- break;
+- }
++ case PTRACE_PEEKTEXT: /* read word at location addr. */
++ case PTRACE_PEEKDATA:
++ i = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
++ if (i != sizeof(tmp))
++ goto out_eio;
++ ret = put_user(tmp, (unsigned long *)data);
++ break;
+
+ /* read the word at location addr in the USER area. */
+- case PTRACE_PEEKUSR: {
+- unsigned long tmp;
+-
+- ret = -EIO;
+- if ((addr & 3) || addr < 0 ||
+- addr > sizeof(struct user) - 3)
+- break;
+-
+- tmp = 0; /* Default return condition */
+- addr = addr >> 2; /* temporary hack. */
+- ret = -EIO;
+- if (addr < 19) {
+- tmp = get_reg(child, addr);
+- if (addr == PT_SR)
+- tmp >>= 16;
+- } else if (addr >= 21 && addr < 49) {
+- tmp = child->thread.fp[addr - 21];
+-#ifdef CONFIG_M68KFPU_EMU
+- /* Convert internal fpu reg representation
+- * into long double format
+- */
+- if (FPU_IS_EMU && (addr < 45) && !(addr % 3))
+- tmp = ((tmp & 0xffff0000) << 15) |
+- ((tmp & 0x0000ffff) << 16);
+-#endif
+- } else
+- break;
+- ret = put_user(tmp,(unsigned long *) data);
+- break;
+- }
+-
+- /* when I and D space are separate, this will have to be fixed. */
+- case PTRACE_POKETEXT: /* write the word at location addr. */
+- case PTRACE_POKEDATA:
+- ret = 0;
+- if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+- break;
+- ret = -EIO;
+- break;
+-
+- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+- ret = -EIO;
+- if ((addr & 3) || addr < 0 ||
+- addr > sizeof(struct user) - 3)
+- break;
+-
+- addr = addr >> 2; /* temporary hack. */
+-
+- if (addr == PT_SR) {
+- data &= SR_MASK;
+- data <<= 16;
+- data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
+- }
+- if (addr < 19) {
+- if (put_reg(child, addr, data))
+- break;
+- ret = 0;
+- break;
+- }
+- if (addr >= 21 && addr < 48)
+- {
+-#ifdef CONFIG_M68KFPU_EMU
+- /* Convert long double format
+- * into internal fpu reg representation
+- */
+- if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) {
+- data = (unsigned long)data << 15;
+- data = (data & 0xffff0000) |
+- ((data & 0x0000ffff) >> 1);
+- }
+-#endif
+- child->thread.fp[addr - 21] = data;
+- ret = 0;
+- }
+- break;
+-
+- case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+- case PTRACE_CONT: { /* restart after signal. */
+- long tmp;
+-
+- ret = -EIO;
+- if (!valid_signal(data))
+- break;
+- if (request == PTRACE_SYSCALL) {
+- child->thread.work.syscall_trace = ~0;
+- } else {
+- child->thread.work.syscall_trace = 0;
+- }
+- child->exit_code = data;
+- /* make sure the single step bit is not set. */
+- tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+- put_reg(child, PT_SR, tmp);
+- child->thread.work.delayed_trace = 0;
+- wake_up_process(child);
+- ret = 0;
+- break;
+- }
+-
+-/*
+- * make the child exit. Best I can do is send it a sigkill.
+- * perhaps it should be put in the status that it wants to
+- * exit.
+- */
+- case PTRACE_KILL: {
+- long tmp;
+-
+- ret = 0;
+- if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+- break;
+- child->exit_code = SIGKILL;
+- /* make sure the single step bit is not set. */
+- tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+- put_reg(child, PT_SR, tmp);
+- child->thread.work.delayed_trace = 0;
+- wake_up_process(child);
+- break;
+- }
+-
+- case PTRACE_SINGLESTEP: { /* set the trap flag. */
+- long tmp;
+-
+- ret = -EIO;
+- if (!valid_signal(data))
+- break;
+- child->thread.work.syscall_trace = 0;
+- tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
+- put_reg(child, PT_SR, tmp);
+- child->thread.work.delayed_trace = 1;
+-
+- child->exit_code = data;
+- /* give it a chance to run. */
+- wake_up_process(child);
+- ret = 0;
+- break;
+- }
++ case PTRACE_PEEKUSR:
++ if (addr & 3)
++ goto out_eio;
++ addr >>= 2; /* temporary hack. */
++
++ if (addr >= 0 && addr < 19) {
++ tmp = get_reg(child, addr);
++ if (addr == PT_SR)
++ tmp >>= 16;
++ } else if (addr >= 21 && addr < 49) {
++ tmp = child->thread.fp[addr - 21];
++ /* Convert internal fpu reg representation
++ * into long double format
++ */
++ if (FPU_IS_EMU && (addr < 45) && !(addr % 3))
++ tmp = ((tmp & 0xffff0000) << 15) |
++ ((tmp & 0x0000ffff) << 16);
++ } else
++ break;
++ ret = put_user(tmp, (unsigned long *)data);
++ break;
++
++ /* when I and D space are separate, this will have to be fixed. */
++ case PTRACE_POKETEXT: /* write the word at location addr. */
++ case PTRACE_POKEDATA:
++ if (access_process_vm(child, addr, &data, sizeof(data), 1) != sizeof(data))
++ goto out_eio;
++ break;
++
++ case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
++ if (addr & 3)
++ goto out_eio;
++ addr >>= 2; /* temporary hack. */
++
++ if (addr == PT_SR) {
++ data &= SR_MASK;
++ data <<= 16;
++ data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
++ } else if (addr >= 0 && addr < 19) {
++ if (put_reg(child, addr, data))
++ goto out_eio;
++ } else if (addr >= 21 && addr < 48) {
++ /* Convert long double format
++ * into internal fpu reg representation
++ */
++ if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) {
++ data = (unsigned long)data << 15;
++ data = (data & 0xffff0000) |
++ ((data & 0x0000ffff) >> 1);
++ }
++ child->thread.fp[addr - 21] = data;
++ } else
++ goto out_eio;
++ break;
++
++ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
++ case PTRACE_CONT: /* restart after signal. */
++ if (!valid_signal(data))
++ goto out_eio;
++
++ if (request == PTRACE_SYSCALL)
++ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
++ else
++ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
++ child->exit_code = data;
++ singlestep_disable(child);
++ wake_up_process(child);
++ break;
+
+- case PTRACE_DETACH: /* detach a process that was attached. */
+- ret = ptrace_detach(child, data);
++ /*
++ * make the child exit. Best I can do is send it a sigkill.
++ * perhaps it should be put in the status that it wants to
++ * exit.
++ */
++ case PTRACE_KILL:
++ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+-
+- case PTRACE_GETREGS: { /* Get all gp regs from the child. */
+- int i;
+- unsigned long tmp;
+- for (i = 0; i < 19; i++) {
+- tmp = get_reg(child, i);
+- if (i == PT_SR)
++ child->exit_code = SIGKILL;
++ singlestep_disable(child);
++ wake_up_process(child);
++ break;
++
++ case PTRACE_SINGLESTEP: /* set the trap flag. */
++ if (!valid_signal(data))
++ goto out_eio;
++
++ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
++ tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
++ put_reg(child, PT_SR, tmp);
++ set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
++
++ child->exit_code = data;
++ /* give it a chance to run. */
++ wake_up_process(child);
++ break;
++
++ case PTRACE_DETACH: /* detach a process that was attached. */
++ ret = ptrace_detach(child, data);
++ break;
++
++ case PTRACE_GETREGS: /* Get all gp regs from the child. */
++ for (i = 0; i < 19; i++) {
++ tmp = get_reg(child, i);
++ if (i == PT_SR)
+ tmp >>= 16;
+- if (put_user(tmp, (unsigned long *) data)) {
+- ret = -EFAULT;
++ ret = put_user(tmp, (unsigned long *)data);
++ if (ret)
+ break;
+- }
+- data += sizeof(long);
+- }
+- ret = 0;
+- break;
++ data += sizeof(long);
+ }
++ break;
+
+- case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+- int i;
+- unsigned long tmp;
+- for (i = 0; i < 19; i++) {
+- if (get_user(tmp, (unsigned long *) data)) {
+- ret = -EFAULT;
++ case PTRACE_SETREGS: /* Set all gp regs in the child. */
++ for (i = 0; i < 19; i++) {
++ ret = get_user(tmp, (unsigned long *)data);
++ if (ret)
+ break;
+- }
+- if (i == PT_SR) {
++ if (i == PT_SR) {
+ tmp &= SR_MASK;
+ tmp <<= 16;
+ tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
+- }
+- put_reg(child, i, tmp);
+- data += sizeof(long);
+ }
+- ret = 0;
+- break;
+- }
+-
+- case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+- ret = 0;
+- if (copy_to_user((void *)data, &child->thread.fp,
+- sizeof(struct user_m68kfp_struct)))
+- ret = -EFAULT;
+- break;
++ put_reg(child, i, tmp);
++ data += sizeof(long);
+ }
++ break;
+
+- case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+- ret = 0;
+- if (copy_from_user(&child->thread.fp, (void *)data,
+- sizeof(struct user_m68kfp_struct)))
+- ret = -EFAULT;
+- break;
+- }
+-
+- default:
+- ret = ptrace_request(child, request, addr, data);
+- break;
++ case PTRACE_GETFPREGS: /* Get the child FPU state. */
++ if (copy_to_user((void *)data, &child->thread.fp,
++ sizeof(struct user_m68kfp_struct)))
++ ret = -EFAULT;
++ break;
++
++ case PTRACE_SETFPREGS: /* Set the child FPU state. */
++ if (copy_from_user(&child->thread.fp, (void *)data,
++ sizeof(struct user_m68kfp_struct)))
++ ret = -EFAULT;
++ break;
++
++ default:
++ ret = ptrace_request(child, request, addr, data);
++ break;
+ }
+ out_tsk:
+ put_task_struct(child);
+ out:
+ unlock_kernel();
+ return ret;
++out_eio:
++ ret = -EIO;
++ goto out_tsk;
+ }
+
+ asmlinkage void syscall_trace(void)
+ {
+- if (!current->thread.work.delayed_trace &&
+- !current->thread.work.syscall_trace)
+- return;
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+ /*
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/mm/Makefile linux-2.6.12/arch/m68k/mm/Makefile
+--- linux-2.6.12-i386/arch/m68k/mm/Makefile 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/mm/Makefile 2004-02-06 14:59:40.000000000 +0100
+@@ -2,7 +2,7 @@
+ # Makefile for the linux m68k-specific parts of the memory manager.
+ #
+
+-obj-y := init.o fault.o hwtest.o
++obj-y := cache.o init.o fault.o hwtest.o
+
+ obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o
+ obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/mm/cache.c linux-2.6.12/arch/m68k/mm/cache.c
+--- linux-2.6.12-i386/arch/m68k/mm/cache.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12/arch/m68k/mm/cache.c 2004-04-05 16:34:15.000000000 +0200
+@@ -0,0 +1,160 @@
++/*
++ * linux/arch/m68k/mm/cache.c
++ *
++ * Instruction cache handling
++ *
++ * Copyright (C) 1995 Hamish Macdonald
++ */
++
++#include <asm/pgalloc.h>
++#include <asm/traps.h>
++
++
++static unsigned long virt_to_phys_slow(unsigned long vaddr, mm_segment_t fs)
++{
++ if (CPU_IS_060) {
++ mm_segment_t old_fs = get_fs();
++ unsigned long paddr;
++
++ set_fs(fs);
++
++ /* The PLPAR instruction causes an access error if the translation
++ * is not possible. To catch this we use the same exception mechanism
++ * as for user space accesses in <asm/uaccess.h>. */
++ asm volatile (".chip 68060\n"
++ "1: plpar (%0)\n"
++ ".chip 68k\n"
++ "2:\n"
++ ".section .fixup,\"ax\"\n"
++ " .even\n"
++ "3: sub.l %0,%0\n"
++ " jra 2b\n"
++ ".previous\n"
++ ".section __ex_table,\"a\"\n"
++ " .align 4\n"
++ " .long 1b,3b\n"
++ ".previous"
++ : "=a" (paddr)
++ : "0" (vaddr));
++ set_fs(old_fs);
++ return paddr;
++ } else if (CPU_IS_040) {
++ mm_segment_t old_fs = get_fs();
++ unsigned long mmusr;
++
++ set_fs(fs);
++
++ asm volatile (".chip 68040\n\t"
++ "ptestr (%1)\n\t"
++ "movec %%mmusr, %0\n\t"
++ ".chip 68k"
++ : "=r" (mmusr)
++ : "a" (vaddr));
++ set_fs(old_fs);
++
++ if (mmusr & MMU_R_040)
++ return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK);
++ } else {
++ unsigned short mmusr;
++ unsigned long *descaddr;
++
++ asm volatile ("ptestr %3,%2@,#7,%0\n\t"
++ "pmove %%psr,%1@"
++ : "=a&" (descaddr)
++ : "a" (&mmusr), "a" (vaddr), "d" (fs.seg));
++ if (mmusr & (MMU_I|MMU_B|MMU_L))
++ return 0;
++ descaddr = phys_to_virt((unsigned long)descaddr);
++ switch (mmusr & MMU_NUM) {
++ case 1:
++ return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff);
++ case 2:
++ return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff);
++ case 3:
++ return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK);
++ }
++ }
++ return 0;
++}
++
++/* Push n pages at kernel virtual address and clear the icache */
++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
++void flush_icache_range(unsigned long address, unsigned long endaddr)
++{
++ if (CPU_IS_040_OR_060) {
++ address &= PAGE_MASK;
++
++ if (address >= PAGE_OFFSET && address < (unsigned long)high_memory) {
++ do {
++ asm volatile ("nop\n\t"
++ ".chip 68040\n\t"
++ "cpushp %%bc,(%0)\n\t"
++ ".chip 68k"
++ : : "a" (virt_to_phys((void *)address)));
++ address += PAGE_SIZE;
++ } while (address < endaddr);
++ } else {
++ do {
++ asm volatile ("nop\n\t"
++ ".chip 68040\n\t"
++ "cpushp %%bc,(%0)\n\t"
++ ".chip 68k"
++ : : "a" (virt_to_phys_slow(address, KERNEL_DS)));
++ address += PAGE_SIZE;
++ } while (address < endaddr);
++ }
++ } else {
++ unsigned long tmp;
++ asm volatile ("movec %%cacr,%0\n\t"
++ "orw %1,%0\n\t"
++ "movec %0,%%cacr"
++ : "=&d" (tmp)
++ : "di" (FLUSH_I));
++ }
++}
++
++void flush_icache_user_range(void *addr, unsigned long size)
++{
++ unsigned long address = (unsigned long)addr;
++ unsigned long endaddr = address + size;
++
++ if (CPU_IS_040_OR_060) {
++ address &= PAGE_MASK;
++
++ do {
++ asm volatile ("nop\n\t"
++ ".chip 68040\n\t"
++ "cpushp %%bc,(%0)\n\t"
++ ".chip 68k"
++ : : "a" (virt_to_phys_slow(address, get_fs())));
++ address += PAGE_SIZE;
++ } while (address < endaddr);
++ } else {
++ unsigned long tmp;
++ asm volatile ("movec %%cacr,%0\n\t"
++ "orw %1,%0\n\t"
++ "movec %0,%%cacr"
++ : "=&d" (tmp)
++ : "di" (FLUSH_I));
++ }
++}
++
++void flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
++ unsigned long addr, int len)
++{
++ if (CPU_IS_040_OR_060) {
++ asm volatile ("nop\n\t"
++ ".chip 68040\n\t"
++ "cpushp %%bc,(%0)\n\t"
++ ".chip 68k"
++ : : "a" (page_to_phys(page)));
++ } else {
++ unsigned long tmp;
++ asm volatile ("movec %%cacr,%0\n\t"
++ "orw %1,%0\n\t"
++ "movec %0,%%cacr"
++ : "=&d" (tmp)
++ : "di" (FLUSH_I));
++ }
++}
++
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/arch/m68k/mm/memory.c linux-2.6.12/arch/m68k/mm/memory.c
+--- linux-2.6.12-i386/arch/m68k/mm/memory.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/arch/m68k/mm/memory.c 2004-10-03 16:35:42.000000000 +0200
+@@ -354,110 +354,6 @@
+ #endif
+ }
+
+-static unsigned long virt_to_phys_slow(unsigned long vaddr)
+-{
+- if (CPU_IS_060) {
+- mm_segment_t fs = get_fs();
+- unsigned long paddr;
+-
+- set_fs(get_ds());
+-
+- /* The PLPAR instruction causes an access error if the translation
+- * is not possible. To catch this we use the same exception mechanism
+- * as for user space accesses in <asm/uaccess.h>. */
+- asm volatile (".chip 68060\n"
+- "1: plpar (%0)\n"
+- ".chip 68k\n"
+- "2:\n"
+- ".section .fixup,\"ax\"\n"
+- " .even\n"
+- "3: sub.l %0,%0\n"
+- " jra 2b\n"
+- ".previous\n"
+- ".section __ex_table,\"a\"\n"
+- " .align 4\n"
+- " .long 1b,3b\n"
+- ".previous"
+- : "=a" (paddr)
+- : "0" (vaddr));
+- set_fs(fs);
+- return paddr;
+- } else if (CPU_IS_040) {
+- mm_segment_t fs = get_fs();
+- unsigned long mmusr;
+-
+- set_fs(get_ds());
+-
+- asm volatile (".chip 68040\n\t"
+- "ptestr (%1)\n\t"
+- "movec %%mmusr, %0\n\t"
+- ".chip 68k"
+- : "=r" (mmusr)
+- : "a" (vaddr));
+- set_fs(fs);
+-
+- if (mmusr & MMU_R_040)
+- return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK);
+- } else {
+- unsigned short mmusr;
+- unsigned long *descaddr;
+-
+- asm volatile ("ptestr #5,%2@,#7,%0\n\t"
+- "pmove %%psr,%1@"
+- : "=a&" (descaddr)
+- : "a" (&mmusr), "a" (vaddr));
+- if (mmusr & (MMU_I|MMU_B|MMU_L))
+- return 0;
+- descaddr = phys_to_virt((unsigned long)descaddr);
+- switch (mmusr & MMU_NUM) {
+- case 1:
+- return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff);
+- case 2:
+- return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff);
+- case 3:
+- return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK);
+- }
+- }
+- return 0;
+-}
+-
+-/* Push n pages at kernel virtual address and clear the icache */
+-/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+-void flush_icache_range(unsigned long address, unsigned long endaddr)
+-{
+- if (CPU_IS_040_OR_060) {
+- address &= PAGE_MASK;
+-
+- if (address >= PAGE_OFFSET && address < (unsigned long)high_memory) {
+- do {
+- asm volatile ("nop\n\t"
+- ".chip 68040\n\t"
+- "cpushp %%bc,(%0)\n\t"
+- ".chip 68k"
+- : : "a" (virt_to_phys((void *)address)));
+- address += PAGE_SIZE;
+- } while (address < endaddr);
+- } else {
+- do {
+- asm volatile ("nop\n\t"
+- ".chip 68040\n\t"
+- "cpushp %%bc,(%0)\n\t"
+- ".chip 68k"
+- : : "a" (virt_to_phys_slow(address)));
+- address += PAGE_SIZE;
+- } while (address < endaddr);
+- }
+- } else {
+- unsigned long tmp;
+- asm volatile ("movec %%cacr,%0\n\t"
+- "orw %1,%0\n\t"
+- "movec %0,%%cacr"
+- : "=&d" (tmp)
+- : "di" (FLUSH_I));
+- }
+-}
+-
+-
+ #ifndef CONFIG_SINGLE_MEMORY_CHUNK
+ int mm_end_of_chunk (unsigned long addr, int len)
+ {
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/block/swim3.c linux-2.6.12/drivers/block/swim3.c
+--- linux-2.6.12-i386/drivers/block/swim3.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/block/swim3.c 2005-04-25 23:08:32.000000000 +0200
+@@ -302,7 +302,7 @@
+ continue;
+ start_request(&floppy_states[i]);
+ }
+- sti();
++ local_irq_enable();
+ }
+
+ static void start_request(struct floppy_state *fs)
+@@ -368,7 +368,7 @@
+ {
+ unsigned long flags;
+
+- save_flags(flags); cli();
++ local_irq_save(flags);
+ if (fs->timeout_pending)
+ del_timer(&fs->timeout);
+ fs->timeout.expires = jiffies + nticks;
+@@ -376,7 +376,7 @@
+ fs->timeout.data = (unsigned long) fs;
+ add_timer(&fs->timeout);
+ fs->timeout_pending = 1;
+- restore_flags(flags);
++ local_irq_restore(flags);
+ }
+
+ static inline void scan_track(struct floppy_state *fs)
+@@ -788,14 +788,13 @@
+ {
+ unsigned long flags;
+
+- save_flags(flags);
+- cli();
++ local_irq_save(flags);
+ if (fs->state != idle) {
+ ++fs->wanted;
+ while (fs->state != available) {
+ if (interruptible && signal_pending(current)) {
+ --fs->wanted;
+- restore_flags(flags);
++ local_irq_restore(flags);
+ return -EINTR;
+ }
+ interruptible_sleep_on(&fs->wait);
+@@ -803,7 +802,7 @@
+ --fs->wanted;
+ }
+ fs->state = state;
+- restore_flags(flags);
++ local_irq_restore(flags);
+ return 0;
+ }
+
+@@ -811,11 +810,10 @@
+ {
+ unsigned long flags;
+
+- save_flags(flags);
+- cli();
++ local_irq_save(flags);
+ fs->state = idle;
+ start_request(fs);
+- restore_flags(flags);
++ local_irq_restore(flags);
+ }
+
+ static int fd_eject(struct floppy_state *fs)
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/char/16c552.h linux-2.6.12/drivers/char/16c552.h
+--- linux-2.6.12-i386/drivers/char/16c552.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12/drivers/char/16c552.h 2001-10-22 11:34:32.000000000 +0200
+@@ -0,0 +1,165 @@
++/*
++ * Definitions for the 16c552 DACE
++ * (dual-asynchronous-communications-element) used on the GVP
++ * IO-Extender.
++ *
++ * Basically this is two 16c550 uarts's and a parallel port, which is
++ * why the serial definitions should be valid for the 16c550 uart
++ * aswell.
++ *
++ * Data was taken from National Semiconductors duart 16c552
++ * data-sheets and the Texas Instruments DACE 16c552 data-sheets (the
++ * NS version of the chip is _non_ standard and their data-sheets did
++ * cost me several wasted hours of work).
++ *
++ * This file is (C) 1995 Jes Sorensen (jds at kom.auc.dk)
++ *
++ * Moved from drivers/char/ to include/linux/, because it's useful
++ * on more than just the one card. I'm using it on the hp300 DCA
++ * serial driver, for example.
++ * -- Peter Maydell <pmaydell at chiark.greenend.org.uk> 05/1998
++ */
++
++#ifndef _16C552_H_
++#define _16C552_H_
++
++/* Serial stuff */
++
++struct uart_16c550 {
++ volatile u_char skip0;
++ volatile u_char RBR;
++ volatile u_char skip1;
++ volatile u_char IER;
++ volatile u_char skip2;
++ volatile u_char IIR;
++ volatile u_char skip3;
++ volatile u_char LCR;
++ volatile u_char skip4;
++ volatile u_char MCR;
++ volatile u_char skip5;
++ volatile u_char LSR;
++ volatile u_char skip6;
++ volatile u_char MSR;
++ volatile u_char skip7;
++ volatile u_char SCR;
++};
++
++#define THR RBR
++#define FCR IIR
++#define DLL RBR
++#define DLM IER
++#define AFR IIR
++
++/*
++ * Bit-defines for the various registers.
++ */
++
++
++/* IER */
++
++#define ERDAI (1<<0)
++#define ETHREI (1<<1)
++#define ELSI (1<<2)
++#define EMSI (1<<3)
++
++/* IIR - Interrupt Ident. Register */
++
++#define IRQ_PEND (1<<0) /* NOTE: IRQ_PEND=0 implies irq pending */
++#define IRQ_ID1 (1<<1)
++#define IRQ_ID2 (1<<2)
++#define IRQ_ID3 (1<<3)
++#define FIFO_ENA0 (1<<6) /* Both these are set when FCR(1<<0)=1 */
++#define FIFO_ENA1 (1<<7)
++
++#define IRQ_RLS (IRQ_ID1 | IRQ_ID2)
++#define IRQ_RDA (IRQ_ID2)
++#define IRQ_CTI (IRQ_ID2 | IRQ_ID3)
++#define IRQ_THRE (IRQ_ID1)
++#define IRQ_MS 0
++
++/* FCR - FIFO Control Register */
++
++#define FIFO_ENA (1<<0)
++#define RCVR_FIFO_RES (1<<1)
++#define XMIT_FIFO_RES (1<<2)
++#define DMA_MODE_SEL (1<<3)
++#define RCVR_TRIG_LSB (1<<6)
++#define RCVR_TRIG_MSB (1<<7)
++
++#define FIFO_TRIG_1 0x00
++#define FIFO_TRIG_4 RCVR_TRIG_LSB
++#define FIFO_TRIG_8 RCVR_TRIG_MSB
++#define FIFO_TRIG_14 RCVR_TRIG_LSB|RCVR_TRIG_MSB
++
++/* LCR - Line Control Register */
++
++#define WLS0 (1<<0)
++#define WLS1 (1<<1)
++#define STB (1<<2)
++#define PEN (1<<3)
++#define EPS (1<<4)
++#define STICK_PARITY (1<<5)
++#define SET_BREAK (1<<6)
++#define DLAB (1<<7)
++
++#define data_5bit 0x00
++#define data_6bit 0x01
++#define data_7bit 0x02
++#define data_8bit 0x03
++
++
++/* MCR - Modem Control Register */
++
++#define DTR (1<<0)
++#define RTS (1<<1)
++#define OUT1 (1<<2)
++#define OUT2 (1<<3)
++#define LOOP (1<<4)
++
++/* LSR - Line Status Register */
++
++#define DR (1<<0)
++#define OE (1<<1)
++#define PE (1<<2)
++#define FE (1<<3)
++#define BI (1<<4)
++#define THRE (1<<5)
++#define TEMT (1<<6)
++#define RCVR_FIFO_ERR (1<<7)
++
++/* MSR - Modem Status Register */
++
++#define DCTS (1<<0)
++#define DDSR (1<<1)
++#define TERI (1<<2)
++#define DDCD (1<<3)
++#define CTS (1<<4)
++#define DSR (1<<5)
++#define RING_I (1<<6)
++#define DCD (1<<7)
++
++/* AFR - Alternate Function Register */
++
++#define CONCUR_WRITE (1<<0)
++#define BAUDOUT (1<<1)
++#define RXRDY (1<<2)
++
++/* Parallel stuff */
++
++/*
++ * Unfortunately National Semiconductors did not supply the
++ * specifications for the parallel port in the chip :-(
++ * TI succed though, so here they are :-)
++ *
++ * Defines for the bits can be found by including <linux/lp.h>
++ */
++struct IOEXT_par {
++ volatile u_char skip0;
++ volatile u_char DATA;
++ volatile u_char skip1;
++ volatile u_char STATUS;
++ volatile u_char skip2;
++ volatile u_char CTRL;
++};
++
++#endif
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/char/ioext.h linux-2.6.12/drivers/char/ioext.h
+--- linux-2.6.12-i386/drivers/char/ioext.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12/drivers/char/ioext.h 2001-10-22 11:34:32.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * Shared data structure for GVP IO-Extender support.
++ *
++ * Merge of ioext.h and ser_ioext.h
++ */
++#ifndef _IOEXT_H_
++#define _IOEXT_H_
++
++#include <linux/config.h>
++#include <linux/netdevice.h>
++
++#include "16c552.h"
++
++#define MAX_IOEXT 5 /*
++ * The maximum number of io-extenders is 5, as you
++ * can't have more than 5 ZII boards in any Amiga.
++ */
++
++#define UART_CLK 7372800
++
++#define IOEXT_BAUD_BASE (UART_CLK / 16)
++
++#define IOEXT_MAX_LINES 2
++
++#define IOEXT_PAR_PLIP 0x0001
++#define IOEXT_PAR_LP 0x0002
++
++
++/*
++ * Macros for the serial driver.
++ */
++#define curruart(info) ((struct uart_16c550 *)(info->port))
++
++#define ser_DTRon(info) curruart(info)->MCR |= DTR
++#define ser_RTSon(info) curruart(info)->MCR |= RTS
++#define ser_DTRoff(info) curruart(info)->MCR &= ~DTR
++#define ser_RTSoff(info) curruart(info)->MCR &= ~RTS
++
++
++/*
++ * CNTR defines (copied from the GVP SCSI-driver file gvp11.h
++ */
++#define GVP_BUSY (1<<0)
++#define GVP_IRQ_PEND (1<<1)
++#define GVP_IRQ_ENA (1<<3)
++#define GVP_DIR_WRITE (1<<4)
++
++
++/*
++ * CTRL defines
++ */
++#define PORT0_MIDI (1<<0) /* CLR = DRIVERS SET = MIDI */
++#define PORT1_MIDI (1<<1) /* CLR = DRIVERS SET = MIDI */
++#define PORT0_DRIVER (1<<2) /* CLR = RS232, SET = MIDI */
++#define PORT1_DRIVER (1<<3) /* CLR = RS232, SET = MIDI */
++#define IRQ_SEL (1<<4) /* CLR = INT2, SET = INT6 */
++#define ROM_BANK_SEL (1<<5) /* CLR = LOW 32K, SET = HIGH 32K */
++#define PORT0_CTRL (1<<6) /* CLR = RTSx or RXRDYx, SET = RTSx ONLY */
++#define PORT1_CTRL (1<<7) /* CLR = RTSx or RXRDYx, SET = RTSx ONLY */
++
++
++/*
++ * This is the struct describing the registers on the IO-Extender.
++ * NOTE: The board uses a dual uart (16c552), which should be equal to
++ * two 16c550 uarts.
++ */
++typedef struct {
++ char gap0[0x41];
++ volatile unsigned char CNTR; /* GVP DMAC CNTR (status register) */
++ char gap1[0x11e];
++ struct uart_16c550 uart0; /* The first uart */
++ char gap2[0xf0];
++ struct uart_16c550 uart1; /* The second uart */
++ char gap3[0xf0];
++ struct IOEXT_par par; /* The parallel port */
++ char gap4[0xfb];
++ volatile unsigned char CTRL; /* The control-register on the board */
++} IOEXT_struct;
++
++
++typedef struct {
++ int num_uarts;
++ int line[IOEXT_MAX_LINES];
++ volatile struct uart_16c550 *uart[IOEXT_MAX_LINES];
++ IOEXT_struct *board;
++ int spurious_count;
++ unsigned char par_use; /* IOEXT_PAR_xxx */
++#if defined(CONFIG_GVPIOEXT_PLIP) || defined(CONFIG_GVPIOEXT_PLIP_MODULE)
++ struct nt_device *dev;
++#endif
++#if defined(CONFIG_GVPIOEXT_LP) || defined(CONFIG_GVPIOEXT_LP_MODULE)
++ struct lp_struct *lp_table;
++ int lp_dev;
++ int lp_interrupt;
++#endif
++} IOExtInfoType;
++
++/* Number of detected boards. */
++extern int ioext_num;
++extern IOExtInfoType ioext_info[MAX_IOEXT];
++
++void ioext_plip_interrupt(struct net_device *dev, int *spurious_count);
++void ioext_lp_interrupt(int dev, int *spurious_count);
++
++extern struct net_device ioext_dev_plip[3];
++extern struct lp_struct ioext_lp_table[1];
++
++#endif
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/char/mc68681.h linux-2.6.12/drivers/char/mc68681.h
+--- linux-2.6.12-i386/drivers/char/mc68681.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12/drivers/char/mc68681.h 2001-10-22 11:34:32.000000000 +0200
+@@ -0,0 +1,131 @@
++#ifndef _MC68681_H_
++#define _MC68681_H_
++
++/*
++ * This describes an MC68681 DUART. It has almost only overlayed registers, which
++ * the structure very ugly.
++ * Note that the ri-register isn't really a register of the duart but a kludge of bsc
++ * to make the ring indicator available.
++ *
++ * The data came from the MFC-31-Developer Kit (from Ralph Seidel,
++ * zodiac at darkness.gun.de) and the data sheet of Phillip's clone device (SCN68681)
++ * (from Richard Hirst, srh at gpt.co.uk)
++ *
++ * 11.11.95 copyright Joerg Dorchain (dorchain at mpi-sb.mpg.de)
++ *
++ */
++
++struct duarthalf {
++union {
++volatile u_char mr1; /* rw */
++volatile u_char mr2; /* rw */
++} mr;
++volatile u_char ri; /* special, read */
++union {
++volatile u_char sr; /* read */
++volatile u_char csr; /* write */
++} sr_csr;
++u_char pad1;
++volatile u_char cr; /* write */
++u_char pad2;
++union {
++volatile u_char rhr; /* read */
++volatile u_char thr; /* write */
++} hr;
++u_char pad3;
++};
++
++struct duart {
++struct duarthalf pa;
++union {
++volatile u_char ipcr; /* read */
++volatile u_char acr; /* write */
++} ipcr_acr;
++u_char pad1;
++union {
++volatile u_char isr; /* read */
++volatile u_char imr; /* write */
++} ir;
++u_char pad2;
++volatile u_char ctu;
++u_char pad3;
++volatile u_char ctl;
++u_char pad4;
++struct duarthalf pb;
++volatile u_char ivr;
++u_char pad5;
++union {
++volatile u_char ipr; /* read */
++volatile u_char opcr; /* write */
++} ipr_opcr;
++u_char pad6;
++union {
++volatile u_char start; /* read */
++volatile u_char sopc; /* write */
++} start_sopc;
++u_char pad7;
++union {
++volatile u_char stop; /* read */
++volatile u_char ropc; /* write */
++} stop_ropc;
++u_char pad8;
++};
++
++#define MR1_BITS 3
++#define MR1_5BITS 0
++#define MR1_6BITS 1
++#define MR1_7BITS 2
++#define MR1_8BITS 3
++
++#define MR1_PARITY_ODD 4
++
++#define MR1_PARITY 24
++#define MR1_PARITY_WITH 0
++#define MR1_PARITY_FORCE 8
++#define MR1_PARITY_NO 16
++#define MR1_PARITY_MULTIDROP 24
++
++#define MR1_ERROR_BLOCK 32
++#define MR1_FFULL_IRQ 64
++#define MR1_RxRTS_ON 128
++
++#define MR2_STOPS 15
++#define MR2_1STOP 7
++#define MR2_2STOP 15
++
++#define MR2_CTS_ON 16
++#define MR2_TxRTS_ON 32
++
++#define MR2_MODE 192
++#define MR2_NORMAL 0
++#define MR2_ECHO 64
++#define MR2_LOCALLOOP 128
++#define MR2_REMOTELOOP 192
++
++#define CR_RXCOMMAND 3
++#define CR_NONE 0
++#define CR_RX_ON 1
++#define CR_RX_OFF 2
++#define CR_TXCOMMAND 12
++#define CR_TX_ON 4
++#define CR_TX_OFF 8
++#define CR_MISC 112
++#define CR_RESET_MR 16
++#define CR_RESET_RX 32
++#define CR_RESET_TX 48
++#define CR_RESET_ERR 64
++#define CR_RESET_BREAK 80
++#define CR_START_BREAK 96
++#define CR_STOP_BREAK 112
++
++#define SR_RXRDY 1
++#define SR_FFULL 2
++#define SR_TXRDY 4
++#define SR_TXEMPT 8
++#define SR_OVERRUN 16
++#define SR_PARITY 32
++#define SR_FRAMING 64
++#define SR_BREAK 128
++
++
++#endif
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/char/plip_ioext.c linux-2.6.12/drivers/char/plip_ioext.c
+--- linux-2.6.12-i386/drivers/char/plip_ioext.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12/drivers/char/plip_ioext.c 2004-10-25 16:38:25.000000000 +0200
+@@ -0,0 +1,1058 @@
++/*
++ * plip_ioext: A parallel port "network" driver for GVP IO-Extender.
++ *
++ * Authors: See drivers/net/plip.c
++ * IO-Extender version by Steve Bennett, <msteveb at ozemail.com.au>
++ *
++ * This driver is for use with a 5-bit cable (LapLink (R) cable).
++ */
++
++static const char *version = "NET3 PLIP version 2.2/m68k";
++
++#define __NO_VERSION__
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/termios.h>
++#include <linux/tty.h>
++#include <linux/serial.h>
++
++#include <asm/setup.h>
++#include <asm/irq.h>
++#include <asm/amigahw.h>
++#include <asm/amigaints.h>
++#include <linux/zorro.h>
++
++#include <linux/config.h>
++#include <linux/kernel.h>
++#include <linux/fcntl.h>
++#include <linux/string.h>
++#include <linux/ptrace.h>
++#include <linux/if_ether.h>
++
++#include <asm/system.h>
++
++#include <linux/in.h>
++#include <linux/delay.h>
++/*#include <linux/lp_m68k.h>*/
++
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/inetdevice.h>
++#include <linux/skbuff.h>
++#include <linux/if_plip.h>
++
++#include <linux/tqueue.h>
++#include <linux/ioport.h>
++#include <linux/bitops.h>
++#include <asm/byteorder.h>
++
++#include "ioext.h"
++
++#define DEBUG 0
++
++/* Map 'struct device *' to our control structure */
++#define PLIP_DEV(DEV) (&ioext_info[(DEV)->irq])
++
++/************************************************************************
++**
++** PLIP definitions
++**
++*************************************************************************
++*/
++
++/* Use 0 for production, 1 for verification, >2 for debug */
++#ifndef NET_DEBUG
++#define NET_DEBUG 2
++#endif
++static unsigned int net_debug = NET_DEBUG;
++
++/* In micro second */
++#define PLIP_DELAY_UNIT 1
++
++/* Connection time out = PLIP_TRIGGER_WAIT * PLIP_DELAY_UNIT usec */
++#define PLIP_TRIGGER_WAIT 500
++
++/* Nibble time out = PLIP_NIBBLE_WAIT * PLIP_DELAY_UNIT usec */
++#define PLIP_NIBBLE_WAIT 3000
++
++#define PAR_DATA(dev) ((dev)->base_addr+0)
++#define PAR_STATUS(dev) ((dev)->base_addr+2)
++#define PAR_CONTROL(dev) ((dev)->base_addr+4)
++
++static void enable_par_irq(struct device *dev, int on);
++static int plip_init(struct device *dev);
++
++/* Bottom halfs */
++static void plip_kick_bh(struct device *dev);
++static void plip_bh(struct device *dev);
++
++/* Functions for DEV methods */
++static int plip_rebuild_header(struct sk_buff *skb);
++static int plip_tx_packet(struct sk_buff *skb, struct device *dev);
++static int plip_open(struct device *dev);
++static int plip_close(struct device *dev);
++static struct enet_statistics *plip_get_stats(struct device *dev);
++static int plip_config(struct device *dev, struct ifmap *map);
++static int plip_ioctl(struct device *dev, struct ifreq *ifr, int cmd);
++
++enum plip_connection_state {
++ PLIP_CN_NONE=0,
++ PLIP_CN_RECEIVE,
++ PLIP_CN_SEND,
++ PLIP_CN_CLOSING,
++ PLIP_CN_ERROR
++};
++
++enum plip_packet_state {
++ PLIP_PK_DONE=0,
++ PLIP_PK_TRIGGER,
++ PLIP_PK_LENGTH_LSB,
++ PLIP_PK_LENGTH_MSB,
++ PLIP_PK_DATA,
++ PLIP_PK_CHECKSUM
++};
++
++enum plip_nibble_state {
++ PLIP_NB_BEGIN,
++ PLIP_NB_1,
++ PLIP_NB_2,
++};
++
++struct plip_local {
++ enum plip_packet_state state;
++ enum plip_nibble_state nibble;
++ union {
++ struct {
++#if defined(__LITTLE_ENDIAN)
++ unsigned char lsb;
++ unsigned char msb;
++#elif defined(__BIG_ENDIAN)
++ unsigned char msb;
++ unsigned char lsb;
++#else
++#error "Please fix the endianness defines in <asm/byteorder.h>"
++#endif
++ } b;
++ unsigned short h;
++ } length;
++ unsigned short byte;
++ unsigned char checksum;
++ unsigned char data;
++ struct sk_buff *skb;
++};
++
++struct net_local {
++ struct enet_statistics enet_stats;
++ struct tq_struct immediate;
++ struct tq_struct deferred;
++ struct plip_local snd_data;
++ struct plip_local rcv_data;
++ unsigned long trigger;
++ unsigned long nibble;
++ enum plip_connection_state connection;
++ unsigned short timeout_count;
++ char is_deferred;
++ int (*orig_rebuild_header)(struct sk_buff *skb);
++};
++
++struct device ioext_dev_plip[] = {
++ {
++ "plip0",
++ 0, 0, 0, 0, /* memory */
++ 0, 0, /* base, irq */
++ 0, 0, 0, NULL, plip_init
++ },
++ {
++ "plip1",
++ 0, 0, 0, 0, /* memory */
++ 0, 0, /* base, irq */
++ 0, 0, 0, NULL, plip_init
++ },
++ {
++ "plip2",
++ 0, 0, 0, 0, /* memory */
++ 0, 0, /* base, irq */
++ 0, 0, 0, NULL, plip_init
++ }
++};
++
++/*
++ * Check for and handle an interrupt for this PLIP device.
++ *
++ */
++void ioext_plip_interrupt(struct device *dev, int *spurious_count)
++{
++ struct net_local *nl;
++ struct plip_local *rcv;
++ unsigned char c0;
++ unsigned long flags;
++
++ nl = (struct net_local *)dev->priv;
++ rcv = &nl->rcv_data;
++
++ c0 = z_readb(PAR_STATUS(dev));
++
++ if (dev->interrupt) {
++ return;
++ }
++
++ if ((c0 & 0xf8) != 0xc0) {
++ /* Not for us */
++ ++*spurious_count;
++ return;
++ }
++
++ *spurious_count = 0;
++ dev->interrupt = 1;
++
++ local_irq_save(flags);
++
++ switch (nl->connection) {
++ case PLIP_CN_CLOSING:
++ dev->tbusy = 0;
++ case PLIP_CN_NONE:
++ case PLIP_CN_SEND:
++ dev->last_rx = jiffies;
++ rcv->state = PLIP_PK_TRIGGER;
++ nl->connection = PLIP_CN_RECEIVE;
++ nl->timeout_count = 0;
++ queue_task(&nl->immediate, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++ local_irq_restore(flags);
++#if 0
++ printk("%s: receive irq in SEND/NONE/CLOSING (%d) ok\n",
++ dev->name, nl->connection);
++#endif
++ break;
++
++ case PLIP_CN_RECEIVE:
++ local_irq_restore(flags);
++ printk("%s: receive interrupt when receiving packet\n",
++ dev->name);
++ break;
++
++ case PLIP_CN_ERROR:
++ local_irq_restore(flags);
++ printk("%s: receive interrupt in error state\n", dev->name);
++ break;
++ }
++}
++
++
++/* Bottom half handler for the delayed request.
++ This routine is kicked by do_timer().
++ Request `plip_bh' to be invoked. */
++static void
++plip_kick_bh(struct device *dev)
++{
++ struct net_local *nl = (struct net_local *)dev->priv;
++
++ if (nl->is_deferred) {
++ queue_task(&nl->immediate, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++ }
++}
++
++/* Forward declarations of internal routines */
++static int plip_none(struct device *, struct net_local *,
++ struct plip_local *, struct plip_local *);
++static int plip_receive_packet(struct device *, struct net_local *,
++ struct plip_local *, struct plip_local *);
++static int plip_send_packet(struct device *, struct net_local *,
++ struct plip_local *, struct plip_local *);
++static int plip_connection_close(struct device *, struct net_local *,
++ struct plip_local *, struct plip_local *);
++static int plip_error(struct device *, struct net_local *,
++ struct plip_local *, struct plip_local *);
++static int plip_bh_timeout_error(struct device *dev, struct net_local *nl,
++ struct plip_local *snd,
++ struct plip_local *rcv,
++ int error);
++
++#define OK 0
++#define TIMEOUT 1
++#define ERROR 2
++
++typedef int (*plip_func)(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv);
++
++static plip_func connection_state_table[] =
++{
++ plip_none,
++ plip_receive_packet,
++ plip_send_packet,
++ plip_connection_close,
++ plip_error
++};
++
++/*
++** enable_par_irq()
++**
++** Enable or disable parallel irq for 'dev' according to 'on'.
++**
++** It is NOT possible to disable only the parallel irq.
++** So we disable the board interrupt instead. This means that
++** during reception of a PLIP packet, no serial interrupts can
++** happen. Sorry.
++*/
++static void enable_par_irq(struct device *dev, int on)
++{
++ if (on) {
++ PLIP_DEV(dev)->board->CNTR |= GVP_IRQ_ENA;
++ }
++ else {
++ PLIP_DEV(dev)->board->CNTR &= ~GVP_IRQ_ENA;
++ }
++}
++
++/* Bottom half handler of PLIP. */
++static void
++plip_bh(struct device *dev)
++{
++ struct net_local *nl = (struct net_local *)dev->priv;
++ struct plip_local *snd = &nl->snd_data;
++ struct plip_local *rcv = &nl->rcv_data;
++ plip_func f;
++ int r;
++
++ nl->is_deferred = 0;
++ f = connection_state_table[nl->connection];
++ if ((r = (*f)(dev, nl, snd, rcv)) != OK
++ && (r = plip_bh_timeout_error(dev, nl, snd, rcv, r)) != OK) {
++ nl->is_deferred = 1;
++ queue_task(&nl->deferred, &tq_timer);
++ }
++}
++
++static int
++plip_bh_timeout_error(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv,
++ int error)
++{
++ unsigned char c0;
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if (nl->connection == PLIP_CN_SEND) {
++
++ if (error != ERROR) { /* Timeout */
++ nl->timeout_count++;
++ if ((snd->state == PLIP_PK_TRIGGER
++ && nl->timeout_count <= 10)
++ || nl->timeout_count <= 3) {
++ local_irq_restore(flags);
++ /* Try again later */
++ return TIMEOUT;
++ }
++ c0 = z_readb(PAR_STATUS(dev));
++ printk(KERN_INFO "%s: transmit timeout(%d,%02x)\n",
++ dev->name, snd->state, c0);
++ }
++ nl->enet_stats.tx_errors++;
++ nl->enet_stats.tx_aborted_errors++;
++ } else if (nl->connection == PLIP_CN_RECEIVE) {
++ if (rcv->state == PLIP_PK_TRIGGER) {
++ /* Transmission was interrupted. */
++ local_irq_restore(flags);
++ return OK;
++ }
++ if (error != ERROR) { /* Timeout */
++ if (++nl->timeout_count <= 3) {
++ local_irq_restore(flags);
++ /* Try again later */
++ return TIMEOUT;
++ }
++ c0 = z_readb(PAR_STATUS(dev));
++ printk(KERN_INFO "%s: receive timeout(%d,%02x)\n",
++ dev->name, rcv->state, c0);
++ }
++ nl->enet_stats.rx_dropped++;
++ }
++ rcv->state = PLIP_PK_DONE;
++ if (rcv->skb) {
++ kfree_skb(rcv->skb);
++ rcv->skb = NULL;
++ }
++ snd->state = PLIP_PK_DONE;
++ if (snd->skb) {
++ dev_kfree_skb(snd->skb);
++ snd->skb = NULL;
++ }
++ enable_par_irq(dev, 0);
++ dev->tbusy = 1;
++ nl->connection = PLIP_CN_ERROR;
++ z_writeb(0x00, PAR_DATA(dev));
++ local_irq_restore(flags);
++
++ return TIMEOUT;
++}
++
++static int
++plip_none(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv)
++{
++ return OK;
++}
++
++/* PLIP_RECEIVE --- receive a byte(two nibbles)
++ Returns OK on success, TIMEOUT on timeout */
++inline static int
++plip_receive(struct device *dev, unsigned short nibble_timeout,
++ enum plip_nibble_state *ns_p, unsigned char *data_p)
++{
++ unsigned char c0, c1;
++ unsigned int cx;
++
++ switch (*ns_p) {
++ case PLIP_NB_BEGIN:
++ cx = nibble_timeout;
++ while (1) {
++ c0 = z_readb(PAR_STATUS(dev));
++ udelay(PLIP_DELAY_UNIT);
++ if ((c0 & 0x80) == 0) {
++ c1 = z_readb(PAR_STATUS(dev));
++ if (c0 == c1)
++ break;
++ }
++ if (--cx == 0)
++ return TIMEOUT;
++ }
++#if 0
++ printk("received first nybble: %02X -> %02X\n",
++ c0, (c0 >> 3) & 0x0F);
++#endif
++ *data_p = (c0 >> 3) & 0x0f;
++ z_writeb(0x10, PAR_DATA(dev)); /* send ACK */
++ *ns_p = PLIP_NB_1;
++
++ case PLIP_NB_1:
++ cx = nibble_timeout;
++ while (1) {
++ c0 = z_readb(PAR_STATUS(dev));
++ udelay(PLIP_DELAY_UNIT);
++ if (c0 & 0x80) {
++ c1 = z_readb(PAR_STATUS(dev));
++ if (c0 == c1)
++ break;
++ }
++ if (--cx == 0)
++ return TIMEOUT;
++ }
++#if 0
++ printk("received second nybble: %02X -> %02X\n",
++ c0, (c0 << 1) & 0xF0);
++#endif
++ *data_p |= (c0 << 1) & 0xf0;
++ z_writeb(0x00, PAR_DATA(dev)); /* send ACK */
++ *ns_p = PLIP_NB_BEGIN;
++ case PLIP_NB_2:
++ break;
++ }
++ return OK;
++}
++
++/* PLIP_RECEIVE_PACKET --- receive a packet */
++static int
++plip_receive_packet(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv)
++{
++ unsigned short nibble_timeout = nl->nibble;
++ unsigned char *lbuf;
++ unsigned long flags;
++
++ switch (rcv->state) {
++ case PLIP_PK_TRIGGER:
++ enable_par_irq(dev, 0);
++ dev->interrupt = 0;
++ z_writeb(0x01, PAR_DATA(dev)); /* send ACK */
++ if (net_debug > 2)
++ printk(KERN_DEBUG "%s: receive start\n", dev->name);
++ rcv->state = PLIP_PK_LENGTH_LSB;
++ rcv->nibble = PLIP_NB_BEGIN;
++
++ case PLIP_PK_LENGTH_LSB:
++ if (snd->state != PLIP_PK_DONE) {
++ if (plip_receive(dev, nl->trigger,
++ &rcv->nibble, &rcv->length.b.lsb)) {
++ /* collision, here dev->tbusy == 1 */
++ rcv->state = PLIP_PK_DONE;
++ nl->is_deferred = 1;
++ nl->connection = PLIP_CN_SEND;
++ queue_task(&nl->deferred, &tq_timer);
++ enable_par_irq(dev, 1);
++ return OK;
++ }
++ } else {
++ if (plip_receive(dev, nibble_timeout,
++ &rcv->nibble, &rcv->length.b.lsb))
++ return TIMEOUT;
++ }
++ rcv->state = PLIP_PK_LENGTH_MSB;
++
++ case PLIP_PK_LENGTH_MSB:
++ if (plip_receive(dev, nibble_timeout,
++ &rcv->nibble, &rcv->length.b.msb))
++ return TIMEOUT;
++ if (rcv->length.h > dev->mtu + dev->hard_header_len
++ || rcv->length.h < 8) {
++ printk(KERN_INFO "%s: bogus packet size %d.\n",
++ dev->name, rcv->length.h);
++ return ERROR;
++ }
++ /* Malloc up new buffer. */
++ rcv->skb = dev_alloc_skb(rcv->length.h);
++ if (rcv->skb == NULL) {
++ printk(KERN_INFO "%s: Memory squeeze.\n", dev->name);
++ return ERROR;
++ }
++ skb_put(rcv->skb,rcv->length.h);
++ rcv->skb->dev = dev;
++ rcv->state = PLIP_PK_DATA;
++ rcv->byte = 0;
++ rcv->checksum = 0;
++
++ case PLIP_PK_DATA:
++ lbuf = rcv->skb->data;
++ do
++ if (plip_receive(dev, nibble_timeout,
++ &rcv->nibble, &lbuf[rcv->byte]))
++ return TIMEOUT;
++ while (++rcv->byte < rcv->length.h);
++ do
++ rcv->checksum += lbuf[--rcv->byte];
++ while (rcv->byte);
++ rcv->state = PLIP_PK_CHECKSUM;
++
++ case PLIP_PK_CHECKSUM:
++ if (plip_receive(dev, nibble_timeout,
++ &rcv->nibble, &rcv->data))
++ return TIMEOUT;
++ if (rcv->data != rcv->checksum) {
++ nl->enet_stats.rx_crc_errors++;
++ if (net_debug)
++ printk(KERN_INFO "%s: checksum error\n",
++ dev->name);
++ return ERROR;
++ }
++ rcv->state = PLIP_PK_DONE;
++
++ case PLIP_PK_DONE:
++ /* Inform the upper layer for the arrival of a packet. */
++ rcv->skb->protocol=eth_type_trans(rcv->skb, dev);
++ netif_rx(rcv->skb);
++ nl->enet_stats.rx_packets++;
++ rcv->skb = NULL;
++ if (net_debug > 2)
++ printk(KERN_DEBUG "%s: receive end\n", dev->name);
++
++ /* Close the connection. */
++ z_writeb (0x00, PAR_DATA(dev));
++
++ local_irq_save(flags);
++ if (snd->state != PLIP_PK_DONE) {
++ nl->connection = PLIP_CN_SEND;
++ local_irq_restore(flags);
++ queue_task(&nl->immediate, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++ enable_par_irq(dev, 1);
++ return OK;
++ } else {
++ nl->connection = PLIP_CN_NONE;
++ local_irq_restore(flags);
++ enable_par_irq(dev, 1);
++ return OK;
++ }
++ }
++ return OK;
++}
++
++/* PLIP_SEND --- send a byte (two nibbles)
++ Returns OK on success, TIMEOUT when timeout */
++inline static int
++plip_send(struct device *dev, unsigned short nibble_timeout,
++ enum plip_nibble_state *ns_p, unsigned char data)
++{
++ unsigned char c0;
++ unsigned int cx;
++
++ switch (*ns_p) {
++ case PLIP_NB_BEGIN:
++ z_writeb((data & 0x0f), PAR_DATA(dev));
++ *ns_p = PLIP_NB_1;
++
++ case PLIP_NB_1:
++ z_writeb(0x10 | (data & 0x0f), PAR_DATA(dev));
++ cx = nibble_timeout;
++ while (1) {
++ c0 = z_readb(PAR_STATUS(dev));
++ if ((c0 & 0x80) == 0)
++ break;
++ if (--cx == 0)
++ return TIMEOUT;
++ udelay(PLIP_DELAY_UNIT);
++ }
++ z_writeb(0x10 | (data >> 4), PAR_DATA(dev));
++ *ns_p = PLIP_NB_2;
++
++ case PLIP_NB_2:
++ z_writeb((data >> 4), PAR_DATA(dev));
++ cx = nibble_timeout;
++ while (1) {
++ c0 = z_readb(PAR_STATUS(dev));
++ if (c0 & 0x80)
++ break;
++ if (--cx == 0)
++ return TIMEOUT;
++ udelay(PLIP_DELAY_UNIT);
++ }
++ *ns_p = PLIP_NB_BEGIN;
++ return OK;
++ }
++ return OK;
++}
++
++/* PLIP_SEND_PACKET --- send a packet */
++static int
++plip_send_packet(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv)
++{
++ unsigned short nibble_timeout = nl->nibble;
++ unsigned char *lbuf;
++ unsigned char c0;
++ unsigned int cx;
++ unsigned long flags;
++
++ if (snd->skb == NULL || (lbuf = snd->skb->data) == NULL) {
++ printk(KERN_INFO "%s: send skb lost\n", dev->name);
++ snd->state = PLIP_PK_DONE;
++ snd->skb = NULL;
++ return ERROR;
++ }
++
++ if (snd->length.h == 0) {
++ return OK;
++ }
++
++ switch (snd->state) {
++ case PLIP_PK_TRIGGER:
++ if ((z_readb(PAR_STATUS(dev)) & 0xf8) != 0x80)
++ return TIMEOUT;
++
++ /* Trigger remote rx interrupt. */
++ z_writeb(0x08, PAR_DATA(dev));
++ cx = nl->trigger;
++ while (1) {
++ udelay(PLIP_DELAY_UNIT);
++ local_irq_save(flags);
++ if (nl->connection == PLIP_CN_RECEIVE) {
++ local_irq_restore(flags);
++ /* interrupted */
++ nl->enet_stats.collisions++;
++ if (net_debug > 1)
++ printk(KERN_INFO "%s: collision.\n",
++ dev->name);
++ return OK;
++ }
++ c0 = z_readb(PAR_STATUS(dev));
++ if (c0 & 0x08) {
++ enable_par_irq(dev, 0);
++ if (net_debug > 2)
++ printk(KERN_DEBUG "%s: send start\n",
++ dev->name);
++ snd->state = PLIP_PK_LENGTH_LSB;
++ snd->nibble = PLIP_NB_BEGIN;
++ nl->timeout_count = 0;
++ local_irq_restore(flags);
++ break;
++ }
++ local_irq_restore(flags);
++ if (--cx == 0) {
++ z_writeb(0x00, PAR_DATA(dev));
++ return TIMEOUT;
++ }
++ }
++
++ case PLIP_PK_LENGTH_LSB:
++ if (plip_send(dev, nibble_timeout,
++ &snd->nibble, snd->length.b.lsb))
++ return TIMEOUT;
++ snd->state = PLIP_PK_LENGTH_MSB;
++
++ case PLIP_PK_LENGTH_MSB:
++ if (plip_send(dev, nibble_timeout,
++ &snd->nibble, snd->length.b.msb))
++ return TIMEOUT;
++ snd->state = PLIP_PK_DATA;
++ snd->byte = 0;
++ snd->checksum = 0;
++
++ case PLIP_PK_DATA:
++ do
++ if (plip_send(dev, nibble_timeout,
++ &snd->nibble, lbuf[snd->byte]))
++ return TIMEOUT;
++ while (++snd->byte < snd->length.h);
++ do
++ snd->checksum += lbuf[--snd->byte];
++ while (snd->byte);
++ snd->state = PLIP_PK_CHECKSUM;
++
++ case PLIP_PK_CHECKSUM:
++ if (plip_send(dev, nibble_timeout,
++ &snd->nibble, snd->checksum))
++ return TIMEOUT;
++
++ dev_kfree_skb(snd->skb);
++ nl->enet_stats.tx_packets++;
++ snd->state = PLIP_PK_DONE;
++
++ case PLIP_PK_DONE:
++ /* Close the connection */
++ z_writeb (0x00, PAR_DATA(dev));
++ snd->skb = NULL;
++ if (net_debug > 2)
++ printk(KERN_DEBUG "%s: send end\n", dev->name);
++ nl->connection = PLIP_CN_CLOSING;
++ nl->is_deferred = 1;
++ queue_task(&nl->deferred, &tq_timer);
++ enable_par_irq(dev, 1);
++ return OK;
++ }
++ return OK;
++}
++
++static int
++plip_connection_close(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if (nl->connection == PLIP_CN_CLOSING) {
++ nl->connection = PLIP_CN_NONE;
++ dev->tbusy = 0;
++ mark_bh(NET_BH);
++ }
++ local_irq_restore(flags);
++ return OK;
++}
++
++/* PLIP_ERROR --- wait till other end settled */
++static int
++plip_error(struct device *dev, struct net_local *nl,
++ struct plip_local *snd, struct plip_local *rcv)
++{
++ unsigned char status;
++
++ status = z_readb(PAR_STATUS(dev));
++ if ((status & 0xf8) == 0x80) {
++ if (net_debug > 2)
++ printk(KERN_DEBUG "%s: reset interface.\n", dev->name);
++ nl->connection = PLIP_CN_NONE;
++ dev->tbusy = 0;
++ dev->interrupt = 0;
++ enable_par_irq(dev, 1);
++ mark_bh(NET_BH);
++ } else {
++ nl->is_deferred = 1;
++ queue_task(&nl->deferred, &tq_timer);
++ }
++
++ return OK;
++}
++
++/* We don't need to send arp, for plip is point-to-point. */
++static int
++plip_rebuild_header(struct sk_buff *skb)
++{
++ struct device *dev = skb->dev;
++ struct net_local *nl = (struct net_local *)dev->priv;
++ struct ethhdr *eth = (struct ethhdr *)skb->data;
++ int i;
++
++ if ((dev->flags & IFF_NOARP)==0)
++ return nl->orig_rebuild_header(skb);
++
++ if (eth->h_proto != __constant_htons(ETH_P_IP)
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ && eth->h_proto != __constant_htons(ETH_P_IPV6)
++#endif
++ ) {
++ printk(KERN_ERR "plip_rebuild_header: Don't know how to resolve type %d addresses?\n", (int)eth->h_proto);
++ memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
++ return 0;
++ }
++
++ for (i=0; i < ETH_ALEN - sizeof(u32); i++)
++ eth->h_dest[i] = 0xfc;
++#if 0
++ *(u32 *)(eth->h_dest+i) = dst;
++#else
++ /* Do not want to include net/route.h here.
++ * In any case, it is TOP of silliness to emulate
++ * hardware addresses on PtP link. --ANK
++ */
++ *(u32 *)(eth->h_dest+i) = 0;
++#endif
++ return 0;
++}
++
++static int
++plip_tx_packet(struct sk_buff *skb, struct device *dev)
++{
++ struct net_local *nl = (struct net_local *)dev->priv;
++ struct plip_local *snd = &nl->snd_data;
++ unsigned long flags;
++
++ if (dev->tbusy)
++ return 1;
++
++ if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
++ printk(KERN_ERR "%s: Transmitter access conflict.\n",
++ dev->name);
++ return 1;
++ }
++
++ if (skb->len > dev->mtu + dev->hard_header_len) {
++ printk(KERN_ERR "%s: packet too big, %d.\n",
++ dev->name, (int)skb->len);
++ dev->tbusy = 0;
++ return 0;
++ }
++
++ if (net_debug > 2)
++ printk(KERN_DEBUG "%s: send request\n", dev->name);
++
++ local_irq_save(flags);
++ dev->trans_start = jiffies;
++ snd->skb = skb;
++ snd->length.h = skb->len;
++ snd->state = PLIP_PK_TRIGGER;
++ if (nl->connection == PLIP_CN_NONE) {
++ nl->connection = PLIP_CN_SEND;
++ nl->timeout_count = 0;
++ }
++ queue_task(&nl->immediate, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++/* Open/initialize the board. This is called (in the current kernel)
++ sometime after booting when the 'ifconfig' program is run.
++
++ */
++static int
++plip_open(struct device *dev)
++{
++ struct net_local *nl = (struct net_local *)dev->priv;
++ struct in_device *in_dev;
++
++#if defined(CONFIG_GVPIOEXT_LP) || defined(CONFIG_GVPIOEXT_LP_MODULE)
++ /* Yes, there is a race condition here. Fix it later */
++ if (PLIP_DEV(dev)->par_use & IOEXT_PAR_LP) {
++ /* Can't open if lp is in use */
++#if DEBUG
++ printk("par is in use by lp\n");
++#endif
++ return(-EBUSY);
++ }
++#endif
++ PLIP_DEV(dev)->par_use |= IOEXT_PAR_PLIP;
++
++#if DEBUG
++ printk("plip_open(): sending 00 to data port\n");
++#endif
++
++ /* Clear the data port. */
++ z_writeb (0x00, PAR_DATA(dev));
++
++#if DEBUG
++ printk("plip_open(): sent\n");
++#endif
++
++ /* Initialize the state machine. */
++ nl->rcv_data.state = nl->snd_data.state = PLIP_PK_DONE;
++ nl->rcv_data.skb = nl->snd_data.skb = NULL;
++ nl->connection = PLIP_CN_NONE;
++ nl->is_deferred = 0;
++
++ /* Fill in the MAC-level header.
++ (ab)Use "dev->broadcast" to store point-to-point MAC address.
++
++ PLIP doesn't have a real mac address, but we need to create one
++ to be DOS compatible. */
++ memset(dev->dev_addr, 0xfc, ETH_ALEN);
++ memset(dev->broadcast, 0xfc, ETH_ALEN);
++
++ if ((in_dev=dev->ip_ptr) != NULL) {
++ /*
++ * Any address will do - we take the first
++ */
++ struct in_ifaddr *ifa=in_dev->ifa_list;
++ if (ifa != NULL) {
++ memcpy(dev->dev_addr+2, &ifa->ifa_local, 4);
++ memcpy(dev->broadcast+2, &ifa->ifa_address, 4);
++ }
++ }
++
++ dev->interrupt = 0;
++ dev->start = 1;
++ dev->tbusy = 0;
++
++ MOD_INC_USE_COUNT;
++
++ /* Enable rx interrupt. */
++ enable_par_irq(dev, 1);
++
++ return 0;
++}
++
++/* The inverse routine to plip_open (). */
++static int
++plip_close(struct device *dev)
++{
++ struct net_local *nl = (struct net_local *)dev->priv;
++ struct plip_local *snd = &nl->snd_data;
++ struct plip_local *rcv = &nl->rcv_data;
++ unsigned long flags;
++
++ dev->tbusy = 1;
++ dev->start = 0;
++ local_irq_save(flags);
++ nl->is_deferred = 0;
++ nl->connection = PLIP_CN_NONE;
++ local_irq_restore(flags);
++ z_writeb(0x00, PAR_DATA(dev));
++
++ snd->state = PLIP_PK_DONE;
++ if (snd->skb) {
++ dev_kfree_skb(snd->skb);
++ snd->skb = NULL;
++ }
++ rcv->state = PLIP_PK_DONE;
++ if (rcv->skb) {
++ kfree_skb(rcv->skb);
++ rcv->skb = NULL;
++ }
++
++ PLIP_DEV(dev)->par_use &= ~IOEXT_PAR_PLIP;
++
++ MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++static struct enet_statistics *
++plip_get_stats(struct device *dev)
++{
++ struct net_local *nl = (struct net_local *)dev->priv;
++ struct enet_statistics *r = &nl->enet_stats;
++
++ return r;
++}
++
++static int
++plip_config(struct device *dev, struct ifmap *map)
++{
++ if (dev->flags & IFF_UP)
++ return -EBUSY;
++
++ printk(KERN_INFO "%s: This interface is autodetected (ignored).\n",
++ dev->name);
++
++ return 0;
++}
++
++static int
++plip_ioctl(struct device *dev, struct ifreq *rq, int cmd)
++{
++ struct net_local *nl = (struct net_local *) dev->priv;
++ struct plipconf *pc = (struct plipconf *) &rq->ifr_data;
++
++ switch(pc->pcmd) {
++ case PLIP_GET_TIMEOUT:
++ pc->trigger = nl->trigger;
++ pc->nibble = nl->nibble;
++ break;
++ case PLIP_SET_TIMEOUT:
++ nl->trigger = pc->trigger;
++ nl->nibble = pc->nibble;
++ break;
++ default:
++ return -EOPNOTSUPP;
++ }
++ return 0;
++}
++
++/*
++ * Detect and initialize all IO-Extenders in this system.
++ *
++ * Both PLIP and serial devices are configured.
++ */
++int plip_init(struct device *dev)
++{
++ IOEXT_struct *board;
++ struct net_local *nl;
++
++ if (ioext_num == 0) {
++ printk(KERN_INFO "%s\n", version);
++ }
++
++ board = PLIP_DEV(dev)->board;
++ dev->base_addr = (unsigned long)&board->par.DATA;
++
++ /* Cheat and use irq to index into our table */
++ dev->irq = ioext_num;
++
++ printk(KERN_INFO "%s: IO-Extender parallel port at 0x%08lX\n", dev->name, dev->base_addr);
++
++ /* Fill in the generic fields of the device structure. */
++ ether_setup(dev);
++
++ /* Then, override parts of it */
++ dev->hard_start_xmit = plip_tx_packet;
++ dev->open = plip_open;
++ dev->stop = plip_close;
++ dev->get_stats = plip_get_stats;
++ dev->set_config = plip_config;
++ dev->do_ioctl = plip_ioctl;
++ dev->tx_queue_len = 10;
++ dev->flags = IFF_POINTOPOINT|IFF_NOARP;
++
++ /* Set the private structure */
++ dev->priv = kmalloc(sizeof (struct net_local), GFP_KERNEL);
++ if (dev->priv == NULL) {
++ printk(KERN_ERR "%s: out of memory\n", dev->name);
++ return -ENOMEM;
++ }
++ memset(dev->priv, 0, sizeof(struct net_local));
++ nl = (struct net_local *) dev->priv;
++
++ nl->orig_rebuild_header = dev->rebuild_header;
++ dev->rebuild_header = plip_rebuild_header;
++
++ /* Initialize constants */
++ nl->trigger = PLIP_TRIGGER_WAIT;
++ nl->nibble = PLIP_NIBBLE_WAIT;
++
++ /* Initialize task queue structures */
++ nl->immediate.next = NULL;
++ nl->immediate.sync = 0;
++ nl->immediate.routine = (void *)(void *)plip_bh;
++ nl->immediate.data = dev;
++
++ nl->deferred.next = NULL;
++ nl->deferred.sync = 0;
++ nl->deferred.routine = (void *)(void *)plip_kick_bh;
++ nl->deferred.data = dev;
++
++ /* Don't enable interrupts yet */
++
++ return 0;
++}
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/ide/ide-iops.c linux-2.6.12/drivers/ide/ide-iops.c
+--- linux-2.6.12-i386/drivers/ide/ide-iops.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/ide/ide-iops.c 2005-06-19 16:33:16.000000000 +0200
+@@ -341,6 +341,23 @@
+ int i;
+ u16 *stringcast;
+
++#ifdef __mc68000__
++ if (!MACH_IS_AMIGA && !MACH_IS_MAC && !MACH_IS_Q40 && !MACH_IS_ATARI)
++ return;
++
++#ifdef M68K_IDE_SWAPW
++ if (M68K_IDE_SWAPW) { /* fix bus byteorder first */
++ u_char *p = (u_char *)id;
++ u_char t;
++ for (i = 0; i < 512; i += 2) {
++ t = p[i];
++ p[i] = p[i+1];
++ p[i+1] = t;
++ }
++ }
++#endif
++#endif /* __mc68000__ */
++
+ id->config = __le16_to_cpu(id->config);
+ id->cyls = __le16_to_cpu(id->cyls);
+ id->reserved2 = __le16_to_cpu(id->reserved2);
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/macintosh/adb.c linux-2.6.12/drivers/macintosh/adb.c
+--- linux-2.6.12-i386/drivers/macintosh/adb.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/macintosh/adb.c 2005-06-19 16:33:31.000000000 +0200
+@@ -476,13 +476,15 @@
+ use_sreq = 1;
+ } else
+ use_sreq = 0;
+- req->nbytes = nbytes+1;
++ i = (flags & ADBREQ_RAW) ? 0 : 1;
++ req->nbytes = nbytes+i;
+ req->done = done;
+ req->reply_expected = flags & ADBREQ_REPLY;
+ req->data[0] = ADB_PACKET;
+ va_start(list, nbytes);
+- for (i = 0; i < nbytes; ++i)
+- req->data[i+1] = va_arg(list, int);
++ while (i < req->nbytes) {
++ req->data[i++] = va_arg(list, int);
++ }
+ va_end(list);
+
+ if (flags & ADBREQ_NOSEND)
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/net/Kconfig linux-2.6.12/drivers/net/Kconfig
+--- linux-2.6.12-i386/drivers/net/Kconfig 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/net/Kconfig 2005-06-19 16:33:45.000000000 +0200
+@@ -294,7 +294,7 @@
+
+ config MAC89x0
+ tristate "Macintosh CS89x0 based ethernet cards"
+- depends on NET_ETHERNET && MAC && BROKEN
++ depends on NET_ETHERNET && MAC
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/net/mac89x0.c linux-2.6.12/drivers/net/mac89x0.c
+--- linux-2.6.12-i386/drivers/net/mac89x0.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/net/mac89x0.c 2004-12-30 16:38:24.000000000 +0100
+@@ -128,7 +128,7 @@
+ extern void reset_chip(struct net_device *dev);
+ #endif
+ static int net_open(struct net_device *dev);
+-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
++static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+ static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+ static void set_multicast_list(struct net_device *dev);
+ static void net_rx(struct net_device *dev);
+@@ -374,56 +374,37 @@
+ static int
+ net_send_packet(struct sk_buff *skb, struct net_device *dev)
+ {
+- if (dev->tbusy) {
+- /* If we get here, some higher level has decided we are broken.
+- There should really be a "kick me" function call instead. */
+- int tickssofar = jiffies - dev->trans_start;
+- if (tickssofar < 5)
+- return 1;
+- if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
+- tx_done(dev) ? "IRQ conflict" : "network cable problem");
+- /* Try to restart the adaptor. */
+- dev->tbusy=0;
+- dev->trans_start = jiffies;
+- }
+-
+- /* Block a timer-based transmit from overlapping. This could better be
+- done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
+- if (test_and_set_bit(0, (void*)&dev->tbusy) != 0)
+- printk("%s: Transmitter access conflict.\n", dev->name);
+- else {
+- struct net_local *lp = netdev_priv(dev);
+- unsigned long flags;
+-
+- if (net_debug > 3)
+- printk("%s: sent %d byte packet of type %x\n",
+- dev->name, skb->len,
+- (skb->data[ETH_ALEN+ETH_ALEN] << 8)
+- | skb->data[ETH_ALEN+ETH_ALEN+1]);
+-
+- /* keep the upload from being interrupted, since we
+- ask the chip to start transmitting before the
+- whole packet has been completely uploaded. */
+- local_irq_save(flags);
+-
+- /* initiate a transmit sequence */
+- writereg(dev, PP_TxCMD, lp->send_cmd);
+- writereg(dev, PP_TxLength, skb->len);
+-
+- /* Test to see if the chip has allocated memory for the packet */
+- if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
+- /* Gasp! It hasn't. But that shouldn't happen since
+- we're waiting for TxOk, so return 1 and requeue this packet. */
+- local_irq_restore(flags);
+- return 1;
+- }
++ struct net_local *lp = netdev_priv(dev);
++ unsigned long flags;
+
+- /* Write the contents of the packet */
+- memcpy_toio(dev->mem_start + PP_TxFrame, skb->data, skb->len+1);
++ if (net_debug > 3)
++ printk("%s: sent %d byte packet of type %x\n",
++ dev->name, skb->len,
++ (skb->data[ETH_ALEN+ETH_ALEN] << 8)
++ | skb->data[ETH_ALEN+ETH_ALEN+1]);
++
++ /* keep the upload from being interrupted, since we
++ ask the chip to start transmitting before the
++ whole packet has been completely uploaded. */
++ local_irq_save(flags);
+
++ /* initiate a transmit sequence */
++ writereg(dev, PP_TxCMD, lp->send_cmd);
++ writereg(dev, PP_TxLength, skb->len);
++
++ /* Test to see if the chip has allocated memory for the packet */
++ if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
++ /* Gasp! It hasn't. But that shouldn't happen since
++ we're waiting for TxOk, so return 1 and requeue this packet. */
+ local_irq_restore(flags);
+- dev->trans_start = jiffies;
++ return 1;
+ }
++
++ /* Write the contents of the packet */
++ memcpy((void *)(dev->mem_start + PP_TxFrame), skb->data, skb->len+1);
++
++ local_irq_restore(flags);
++ dev->trans_start = jiffies;
+ dev_kfree_skb (skb);
+
+ return 0;
+@@ -441,9 +422,6 @@
+ printk ("net_interrupt(): irq %d for unknown device.\n", irq);
+ return IRQ_NONE;
+ }
+- if (dev->interrupt)
+- printk("%s: Re-entering the interrupt handler.\n", dev->name);
+- dev->interrupt = 1;
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+@@ -464,8 +442,7 @@
+ break;
+ case ISQ_TRANSMITTER_EVENT:
+ lp->stats.tx_packets++;
+- dev->tbusy = 0;
+- mark_bh(NET_BH); /* Inform upper layers. */
++ netif_wake_queue(dev);
+ if ((status & TX_OK) == 0) lp->stats.tx_errors++;
+ if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
+ if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
+@@ -479,8 +456,7 @@
+ That shouldn't happen since we only ever
+ load one packet. Shrug. Do the right
+ thing anyway. */
+- dev->tbusy = 0;
+- mark_bh(NET_BH); /* Inform upper layers. */
++ netif_wake_queue(dev);
+ }
+ if (status & TX_UNDERRUN) {
+ if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
+@@ -497,7 +473,6 @@
+ break;
+ }
+ }
+- dev->interrupt = 0;
+ return IRQ_HANDLED;
+ }
+
+@@ -532,7 +507,7 @@
+ skb_put(skb, length);
+ skb->dev = dev;
+
+- memcpy_fromio(skb->data, dev->mem_start + PP_RxFrame, length);
++ memcpy(skb->data, (void *)(dev->mem_start + PP_RxFrame), length);
+
+ if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
+ dev->name, length,
+@@ -611,8 +586,6 @@
+ static int set_mac_address(struct net_device *dev, void *addr)
+ {
+ int i;
+- if (dev->start)
+- return -EBUSY;
+ printk("%s: Setting MAC address to ", dev->name);
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/53c7xx.c linux-2.6.12/drivers/scsi/53c7xx.c
+--- linux-2.6.12-i386/drivers/scsi/53c7xx.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/53c7xx.c 2005-06-19 16:34:18.000000000 +0200
+@@ -307,7 +307,7 @@
+
+ static int check_address (unsigned long addr, int size);
+ static void dump_events (struct Scsi_Host *host, int count);
+-static Scsi_Cmnd * return_outstanding_commands (struct Scsi_Host *host,
++static struct scsi_cmnd * return_outstanding_commands (struct Scsi_Host *host,
+ int free, int issue);
+ static void hard_reset (struct Scsi_Host *host);
+ static void ncr_scsi_reset (struct Scsi_Host *host);
+@@ -316,7 +316,7 @@
+ int scntl3, int now_connected);
+ static int datapath_residual (struct Scsi_Host *host);
+ static const char * sbcl_to_phase (int sbcl);
+-static void print_progress (Scsi_Cmnd *cmd);
++static void print_progress (struct scsi_cmnd *cmd);
+ static void print_queues (struct Scsi_Host *host);
+ static void process_issue_queue (unsigned long flags);
+ static int shutdown (struct Scsi_Host *host);
+@@ -341,9 +341,8 @@
+ static void NCR53c7x0_soft_reset (struct Scsi_Host *host);
+
+ /* Size of event list (per host adapter) */
+-static int track_events = 0;
+-static struct Scsi_Host *first_host = NULL; /* Head of list of NCR boards */
+-static Scsi_Host_Template *the_template = NULL;
++static int track_events;
++static Scsi_Host_Template *the_template;
+
+ /* NCR53c710 script handling code */
+
+@@ -666,8 +665,11 @@
+
+ static struct Scsi_Host *
+ find_host (int host) {
+- struct Scsi_Host *h;
+- for (h = first_host; h && h->host_no != host; h = h->next);
++ struct Scsi_Host *h, *s;
++ list_for_each_entry_safe(h, s, &the_template->legacy_hosts, sht_legacy_list) {
++ if (h->host_no == host)
++ break;
++ }
+ if (!h) {
+ printk (KERN_ALERT "scsi%d not found\n", host);
+ return NULL;
+@@ -715,14 +717,14 @@
+ }
+ hostdata = (struct NCR53c7x0_hostdata *)h->hostdata[0];
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ if (hostdata->initiate_sdtr & (1 << target)) {
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ printk (KERN_ALERT "target %d already doing SDTR\n", target);
+ return -1;
+ }
+ hostdata->initiate_sdtr |= (1 << target);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+ }
+ #endif
+@@ -1033,9 +1035,6 @@
+
+ ccf = clock_to_ccf_710 (expected_clock);
+
+- for (i = 0; i < 16; ++i)
+- hostdata->cmd_allocated[i] = 0;
+-
+ if (hostdata->init_save_regs)
+ hostdata->init_save_regs (host);
+ if (hostdata->init_fixup)
+@@ -1043,7 +1042,6 @@
+
+ if (!the_template) {
+ the_template = host->hostt;
+- first_host = host;
+ }
+
+ /*
+@@ -1306,7 +1304,6 @@
+ hostdata->free->size = max_cmd_size;
+ hostdata->free->free = NULL;
+ hostdata->free->next = NULL;
+- hostdata->extra_allocate = 0;
+
+ /* Allocate command start code space */
+ hostdata->schedule = (chip == 700 || chip == 70066) ?
+@@ -1589,10 +1586,10 @@
+
+ /* The NCR chip _must_ be idle to run the test scripts */
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ if (!hostdata->idle) {
+ printk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return -1;
+ }
+
+@@ -1616,7 +1613,7 @@
+ NCR53c7x0_write8 (DCNTL_REG, hostdata->saved_dcntl | DCNTL_SSM |
+ DCNTL_STD);
+ printk (" started\n");
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+
+ /*
+ * This is currently a .5 second timeout, since (in theory) no slow
+@@ -1655,7 +1652,7 @@
+ hostdata->script, start);
+ printk ("scsi%d : DSPS = 0x%x\n", host->host_no,
+ NCR53c7x0_read32(DSPS_REG));
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return -1;
+ }
+ hostdata->test_running = 0;
+@@ -1693,7 +1690,7 @@
+ local_irq_disable();
+ if (!hostdata->idle) {
+ printk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return -1;
+ }
+
+@@ -1709,7 +1706,7 @@
+ if (hostdata->options & OPTION_DEBUG_TRACE)
+ NCR53c7x0_write8 (DCNTL_REG, hostdata->saved_dcntl |
+ DCNTL_SSM | DCNTL_STD);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+
+ timeout = jiffies + 5 * HZ; /* arbitrary */
+ while ((hostdata->test_completed == -1) && time_before(jiffies, timeout))
+@@ -1731,19 +1728,19 @@
+ host->host_no, i);
+ if (!hostdata->idle) {
+ printk("scsi%d : not idle\n", host->host_no);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return -1;
+ }
+ } else if (hostdata->test_completed == -1) {
+ printk ("scsi%d : test 2 timed out\n", host->host_no);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return -1;
+ }
+ hostdata->test_running = 0;
+ }
+ }
+
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+ }
+
+@@ -1759,7 +1756,7 @@
+
+ static void
+ NCR53c7xx_dsa_fixup (struct NCR53c7x0_cmd *cmd) {
+- Scsi_Cmnd *c = cmd->cmd;
++ struct scsi_cmnd *c = cmd->cmd;
+ struct Scsi_Host *host = c->device->host;
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+@@ -1845,7 +1842,7 @@
+ *
+ * Purpose : mark SCSI command as finished, OR'ing the host portion
+ * of the result word into the result field of the corresponding
+- * Scsi_Cmnd structure, and removing it from the internal queues.
++ * scsi_cmnd structure, and removing it from the internal queues.
+ *
+ * Inputs : cmd - command, result - entire result field
+ *
+@@ -1856,7 +1853,7 @@
+
+ static void
+ abnormal_finished (struct NCR53c7x0_cmd *cmd, int result) {
+- Scsi_Cmnd *c = cmd->cmd;
++ struct scsi_cmnd *c = cmd->cmd;
+ struct Scsi_Host *host = c->device->host;
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+@@ -1870,7 +1867,7 @@
+ printk ("scsi%d: abnormal finished\n", host->host_no);
+ #endif
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ found = 0;
+ /*
+ * Traverse the NCR issue array until we find a match or run out
+@@ -1953,7 +1950,7 @@
+ c->result = result;
+ c->scsi_done(c);
+
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ run_process_issue_queue();
+ }
+
+@@ -1975,7 +1972,7 @@
+ NCR53c7x0_local_declare();
+ struct NCR53c7x0_break *bp;
+ #if 0
+- Scsi_Cmnd *c = cmd ? cmd->cmd : NULL;
++ struct scsi_cmnd *c = cmd ? cmd->cmd : NULL;
+ #endif
+ u32 *dsp;
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+@@ -1988,7 +1985,7 @@
+ * dump the appropriate debugging information to standard
+ * output.
+ */
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ dsp = (u32 *) bus_to_virt(NCR53c7x0_read32(DSP_REG));
+ for (bp = hostdata->breakpoints; bp && bp->address != dsp;
+ bp = bp->next);
+@@ -2010,7 +2007,7 @@
+ * instruction in bytes.
+ */
+
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+ /*
+ * Function : static void print_synchronous (const char *prefix,
+@@ -2252,7 +2249,7 @@
+ NCR53c7x0_cmd *cmd) {
+ NCR53c7x0_local_declare();
+ int print;
+- Scsi_Cmnd *c = cmd ? cmd->cmd : NULL;
++ struct scsi_cmnd *c = cmd ? cmd->cmd : NULL;
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+ u32 dsps,*dsp; /* Argument of the INT instruction */
+@@ -2916,7 +2913,7 @@
+ host->hostdata[0];
+ NCR53c7x0_local_setup(host);
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+
+ /* Disable scsi chip and s/w level 7 ints */
+
+@@ -3017,12 +3014,12 @@
+ }
+ #endif
+ /* Anything needed for your hardware? */
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+
+
+ /*
+- * Function static struct NCR53c7x0_cmd *allocate_cmd (Scsi_Cmnd *cmd)
++ * Function static struct NCR53c7x0_cmd *allocate_cmd (struct scsi_cmnd *cmd)
+ *
+ * Purpose : Return the first free NCR53c7x0_cmd structure (which are
+ * reused in a LIFO manner to minimize cache thrashing).
+@@ -3049,86 +3046,25 @@
+ }
+
+ static struct NCR53c7x0_cmd *
+-allocate_cmd (Scsi_Cmnd *cmd) {
++allocate_cmd (struct scsi_cmnd *cmd) {
+ struct Scsi_Host *host = cmd->device->host;
+ struct NCR53c7x0_hostdata *hostdata =
+ (struct NCR53c7x0_hostdata *) host->hostdata[0];
+- u32 real; /* Real address */
+- int size; /* Size of *tmp */
+ struct NCR53c7x0_cmd *tmp;
+ unsigned long flags;
+
+ if (hostdata->options & OPTION_DEBUG_ALLOCATION)
+ printk ("scsi%d : num_cmds = %d, can_queue = %d\n"
+- " target = %d, lun = %d, %s\n",
++ " target = %d, lun = %d\n",
+ host->host_no, hostdata->num_cmds, host->can_queue,
+- cmd->device->id, cmd->device->lun, (hostdata->cmd_allocated[cmd->device->id] &
+- (1 << cmd->device->lun)) ? "already allocated" : "not allocated");
+-
+-/*
+- * If we have not yet reserved commands for this I_T_L nexus, and
+- * the device exists (as indicated by permanent Scsi_Cmnd structures
+- * being allocated under 1.3.x, or being outside of scan_scsis in
+- * 1.2.x), do so now.
+- */
+- if (!(hostdata->cmd_allocated[cmd->device->id] & (1 << cmd->device->lun)) &&
+- cmd->device && cmd->device->has_cmdblocks) {
+- if ((hostdata->extra_allocate + hostdata->num_cmds) < host->can_queue)
+- hostdata->extra_allocate += host->cmd_per_lun;
+- hostdata->cmd_allocated[cmd->device->id] |= (1 << cmd->device->lun);
+- }
+-
+- for (; hostdata->extra_allocate > 0 ; --hostdata->extra_allocate,
+- ++hostdata->num_cmds) {
+- /* historically, kmalloc has returned unaligned addresses; pad so we
+- have enough room to ROUNDUP */
+- size = hostdata->max_cmd_size + sizeof (void *);
+-#ifdef FORCE_DSA_ALIGNMENT
+- /*
+- * 53c710 rev.0 doesn't have an add-with-carry instruction.
+- * Ensure we allocate enough memory to force alignment.
+- */
+- size += 256;
+-#endif
+-/* FIXME: for ISA bus '7xx chips, we need to or GFP_DMA in here */
++ cmd->device->id, cmd->device->lun);
+
+- if (size > 4096) {
+- printk (KERN_ERR "53c7xx: allocate_cmd size > 4K\n");
+- return NULL;
+- }
+- real = get_zeroed_page(GFP_ATOMIC);
+- if (real == 0)
+- return NULL;
+- memset((void *)real, 0, 4096);
+- cache_push(virt_to_phys((void *)real), 4096);
+- cache_clear(virt_to_phys((void *)real), 4096);
+- kernel_set_cachemode((void *)real, 4096, IOMAP_NOCACHE_SER);
+- tmp = ROUNDUP(real, void *);
+-#ifdef FORCE_DSA_ALIGNMENT
+- {
+- if (((u32)tmp & 0xff) > CmdPageStart)
+- tmp = (struct NCR53c7x0_cmd *)((u32)tmp + 255);
+- tmp = (struct NCR53c7x0_cmd *)(((u32)tmp & ~0xff) + CmdPageStart);
+-#if 0
+- printk ("scsi: size = %d, real = 0x%08x, tmp set to 0x%08x\n",
+- size, real, (u32)tmp);
+-#endif
+- }
+-#endif
+- tmp->real = (void *)real;
+- tmp->size = size;
+- tmp->free = ((void (*)(void *, int)) my_free_page);
+- local_irq_save(flags);
+- tmp->next = hostdata->free;
+- hostdata->free = tmp;
+- local_irq_restore(flags);
+- }
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ tmp = (struct NCR53c7x0_cmd *) hostdata->free;
+ if (tmp) {
+ hostdata->free = tmp->next;
+ }
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ if (!tmp)
+ printk ("scsi%d : can't allocate command for target %d lun %d\n",
+ host->host_no, cmd->device->id, cmd->device->lun);
+@@ -3136,11 +3072,11 @@
+ }
+
+ /*
+- * Function static struct NCR53c7x0_cmd *create_cmd (Scsi_Cmnd *cmd)
++ * Function static struct NCR53c7x0_cmd *create_cmd (struct scsi_cmnd *cmd)
+ *
+ *
+ * Purpose : allocate a NCR53c7x0_cmd structure, initialize it based on the
+- * Scsi_Cmnd structure passed in cmd, including dsa and Linux field
++ * scsi_cmnd structure passed in cmd, including dsa and Linux field
+ * initialization, and dsa code relocation.
+ *
+ * Inputs : cmd - SCSI command
+@@ -3149,7 +3085,7 @@
+ * NULL on failure.
+ */
+ static struct NCR53c7x0_cmd *
+-create_cmd (Scsi_Cmnd *cmd) {
++create_cmd (struct scsi_cmnd *cmd) {
+ NCR53c7x0_local_declare();
+ struct Scsi_Host *host = cmd->device->host;
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+@@ -3173,7 +3109,7 @@
+ return NULL;
+
+ /*
+- * Copy CDB and initialised result fields from Scsi_Cmnd to NCR53c7x0_cmd.
++ * Copy CDB and initialised result fields from scsi_cmnd to NCR53c7x0_cmd.
+ * We do this because NCR53c7x0_cmd may have a special cache mode
+ * selected to cope with lack of bus snooping, etc.
+ */
+@@ -3316,7 +3252,7 @@
+
+ patch_dsa_32(tmp->dsa, dsa_next, 0, 0);
+ /*
+- * XXX is this giving 53c710 access to the Scsi_Cmnd in some way?
++ * XXX is this giving 53c710 access to the scsi_cmnd in some way?
+ * Do we need to change it for caching reasons?
+ */
+ patch_dsa_32(tmp->dsa, dsa_cmnd, 0, virt_to_bus(cmd));
+@@ -3347,17 +3283,17 @@
+ memcpy ((void *) (tmp->select + 1), (void *) wdtr_message,
+ sizeof(wdtr_message));
+ patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1 + sizeof(wdtr_message));
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ hostdata->initiate_wdtr &= ~(1 << cmd->device->id);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ } else if (hostdata->initiate_sdtr & (1 << cmd->device->id)) {
+ memcpy ((void *) (tmp->select + 1), (void *) sdtr_message,
+ sizeof(sdtr_message));
+ patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1 + sizeof(sdtr_message));
+ tmp->flags |= CMD_FLAG_SDTR;
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ hostdata->initiate_sdtr &= ~(1 << cmd->device->id);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+
+ }
+ #if 1
+@@ -3570,8 +3506,8 @@
+ }
+
+ /*
+- * Function : int NCR53c7xx_queue_command (Scsi_Cmnd *cmd,
+- * void (*done)(Scsi_Cmnd *))
++ * Function : int NCR53c7xx_queue_command (struct scsi_cmnd *cmd,
++ * void (*done)(struct scsi_cmnd *))
+ *
+ * Purpose : enqueues a SCSI command
+ *
+@@ -3585,18 +3521,18 @@
+ * twiddling done to the host specific fields of cmd. If the
+ * process_issue_queue coroutine isn't running, it is restarted.
+ *
+- * NOTE : we use the host_scribble field of the Scsi_Cmnd structure to
++ * NOTE : we use the host_scribble field of the scsi_cmnd structure to
+ * hold our own data, and pervert the ptr field of the SCp field
+ * to create a linked list.
+ */
+
+ int
+-NCR53c7xx_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *)) {
++NCR53c7xx_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) {
+ struct Scsi_Host *host = cmd->device->host;
+ struct NCR53c7x0_hostdata *hostdata =
+ (struct NCR53c7x0_hostdata *) host->hostdata[0];
+ unsigned long flags;
+- Scsi_Cmnd *tmp;
++ struct scsi_cmnd *tmp;
+
+ cmd->scsi_done = done;
+ cmd->host_scribble = NULL;
+@@ -3614,7 +3550,7 @@
+ }
+ #endif
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ if ((hostdata->options & (OPTION_DEBUG_INIT_ONLY|OPTION_DEBUG_PROBE_ONLY))
+ || ((hostdata->options & OPTION_DEBUG_TARGET_LIMIT) &&
+ !(hostdata->debug_lun_limit[cmd->device->id] & (1 << cmd->device->lun)))
+@@ -3629,7 +3565,7 @@
+ cmd->device->id, cmd->device->lun);
+ cmd->result = (DID_BAD_TARGET << 16);
+ done(cmd);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+ }
+
+@@ -3638,7 +3574,7 @@
+ printk("scsi%d : maximum commands exceeded\n", host->host_no);
+ cmd->result = (DID_BAD_TARGET << 16);
+ done(cmd);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+ }
+
+@@ -3650,7 +3586,7 @@
+ host->host_no);
+ cmd->result = (DID_BAD_TARGET << 16);
+ done(cmd);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+ }
+ }
+@@ -3673,18 +3609,18 @@
+ cmd->SCp.ptr = (unsigned char *) hostdata->issue_queue;
+ hostdata->issue_queue = cmd;
+ } else {
+- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp->SCp.ptr;
+- tmp = (Scsi_Cmnd *) tmp->SCp.ptr);
++ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->SCp.ptr;
++ tmp = (struct scsi_cmnd *) tmp->SCp.ptr);
+ tmp->SCp.ptr = (unsigned char *) cmd;
+ }
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ run_process_issue_queue();
+ return 0;
+ }
+
+ /*
+ * Function : void to_schedule_list (struct Scsi_Host *host,
+- * struct NCR53c7x0_hostdata * hostdata, Scsi_Cmnd *cmd)
++ * struct NCR53c7x0_hostdata * hostdata, struct scsi_cmnd *cmd)
+ *
+ * Purpose : takes a SCSI command which was just removed from the
+ * issue queue, and deals with it by inserting it in the first
+@@ -3705,7 +3641,7 @@
+ to_schedule_list (struct Scsi_Host *host, struct NCR53c7x0_hostdata *hostdata,
+ struct NCR53c7x0_cmd *cmd) {
+ NCR53c7x0_local_declare();
+- Scsi_Cmnd *tmp = cmd->cmd;
++ struct scsi_cmnd *tmp = cmd->cmd;
+ unsigned long flags;
+ /* dsa start is negative, so subtraction is used */
+ volatile u32 *ncrcurrent;
+@@ -3717,7 +3653,7 @@
+ virt_to_bus(hostdata->dsa), hostdata->dsa);
+ #endif
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+
+ /*
+ * Work around race condition : if an interrupt fired and we
+@@ -3730,7 +3666,7 @@
+ cmd->next = (struct NCR53c7x0_cmd *) hostdata->free;
+ hostdata->free = cmd;
+ tmp->scsi_done(tmp);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return;
+ }
+
+@@ -3760,7 +3696,7 @@
+ cmd->next = (struct NCR53c7x0_cmd *) hostdata->free;
+ hostdata->free = cmd;
+ tmp->scsi_done(tmp);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return;
+ }
+
+@@ -3781,12 +3717,12 @@
+ NCR53c7x0_write8(hostdata->istat, ISTAT_10_SIGP);
+ }
+
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+
+ /*
+ * Function : busyp (struct Scsi_Host *host, struct NCR53c7x0_hostdata
+- * *hostdata, Scsi_Cmnd *cmd)
++ * *hostdata, struct scsi_cmnd *cmd)
+ *
+ * Purpose : decide if we can pass the given SCSI command on to the
+ * device in question or not.
+@@ -3796,7 +3732,7 @@
+
+ static __inline__ int
+ busyp (struct Scsi_Host *host, struct NCR53c7x0_hostdata *hostdata,
+- Scsi_Cmnd *cmd) {
++ struct scsi_cmnd *cmd) {
+ /* FIXME : in the future, this needs to accommodate SCSI-II tagged
+ queuing, and we may be able to play with fairness here a bit.
+ */
+@@ -3822,8 +3758,8 @@
+
+ static void
+ process_issue_queue (unsigned long flags) {
+- Scsi_Cmnd *tmp, *prev;
+- struct Scsi_Host *host;
++ struct scsi_cmnd *tmp, *prev;
++ struct Scsi_Host *host, *s;
+ struct NCR53c7x0_hostdata *hostdata;
+ int done;
+
+@@ -3841,14 +3777,13 @@
+ do {
+ local_irq_disable(); /* Freeze request queues */
+ done = 1;
+- for (host = first_host; host && host->hostt == the_template;
+- host = host->next) {
++ list_for_each_entry_safe(host, s, &the_template->legacy_hosts, sht_legacy_list) {
+ hostdata = (struct NCR53c7x0_hostdata *) host->hostdata[0];
+- local_irq_disable();
++ spin_lock_irq(host->host_lock);
+ if (hostdata->issue_queue) {
+ if (hostdata->state == STATE_DISABLED) {
+- tmp = (Scsi_Cmnd *) hostdata->issue_queue;
+- hostdata->issue_queue = (Scsi_Cmnd *) tmp->SCp.ptr;
++ tmp = (struct scsi_cmnd *) hostdata->issue_queue;
++ hostdata->issue_queue = (struct scsi_cmnd *) tmp->SCp.ptr;
+ tmp->result = (DID_BAD_TARGET << 16);
+ if (tmp->host_scribble) {
+ ((struct NCR53c7x0_cmd *)tmp->host_scribble)->next =
+@@ -3860,15 +3795,15 @@
+ tmp->scsi_done (tmp);
+ done = 0;
+ } else
+- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue,
+- prev = NULL; tmp; prev = tmp, tmp = (Scsi_Cmnd *)
++ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
++ prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *)
+ tmp->SCp.ptr)
+ if (!tmp->host_scribble ||
+ !busyp (host, hostdata, tmp)) {
+ if (prev)
+ prev->SCp.ptr = tmp->SCp.ptr;
+ else
+- hostdata->issue_queue = (Scsi_Cmnd *)
++ hostdata->issue_queue = (struct scsi_cmnd *)
+ tmp->SCp.ptr;
+ tmp->SCp.ptr = NULL;
+ if (tmp->host_scribble) {
+@@ -3893,6 +3828,7 @@
+ done = 0;
+ } /* if target/lun is not busy */
+ } /* if hostdata->issue_queue */
++ spin_unlock(host->host_lock);
+ if (!done)
+ local_irq_restore(flags);
+ } /* for host */
+@@ -4103,7 +4039,7 @@
+ int cnt = 0;
+ int i = insn_log_index;
+ int size;
+- struct Scsi_Host *host = first_host;
++ struct Scsi_Host *host = (struct Scsi_Host *)the_template->legacy_hosts->next;
+
+ while (cnt < 4096) {
+ printk ("%08x (+%6x): ", insn_log[i], (insn_log[i] - (u32)&(((struct NCR53c7x0_hostdata *)host->hostdata[0])->script))/4);
+@@ -4161,14 +4097,14 @@
+ * completion.
+ */
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ restart:
+ for (cmd_prev_ptr = (struct NCR53c7x0_cmd **)&(hostdata->running_list),
+ cmd = (struct NCR53c7x0_cmd *) hostdata->running_list; cmd ;
+ cmd_prev_ptr = (struct NCR53c7x0_cmd **) &(cmd->next),
+ cmd = (struct NCR53c7x0_cmd *) cmd->next)
+ {
+- Scsi_Cmnd *tmp;
++ struct scsi_cmnd *tmp;
+
+ if (!cmd) {
+ printk("scsi%d : very weird.\n", host->host_no);
+@@ -4176,7 +4112,7 @@
+ }
+
+ if (!(tmp = cmd->cmd)) {
+- printk("scsi%d : weird. NCR53c7x0_cmd has no Scsi_Cmnd\n",
++ printk("scsi%d : weird. NCR53c7x0_cmd has no scsi_cmnd\n",
+ host->host_no);
+ continue;
+ }
+@@ -4215,7 +4151,7 @@
+ tmp->scsi_done(tmp);
+ goto restart;
+ }
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+
+ if (!search_found) {
+ printk ("scsi%d : WARNING : INTFLY with no completed commands.\n",
+@@ -4250,7 +4186,7 @@
+ struct NCR53c7x0_cmd *cmd; /* command which halted */
+ u32 *dsa; /* DSA */
+ int handled = 0;
+-
++ unsigned long flags;
+ #ifdef NCR_DEBUG
+ char buf[80]; /* Debugging sprintf buffer */
+ size_t buflen; /* Length of same */
+@@ -4259,6 +4195,7 @@
+ host = (struct Scsi_Host *)dev_id;
+ hostdata = (struct NCR53c7x0_hostdata *) host->hostdata[0];
+ NCR53c7x0_local_setup(host);
++ spin_lock_irqsave(host->host_lock, flags);
+
+ /*
+ * Only read istat once per loop, since reading it again will unstack
+@@ -4351,7 +4288,8 @@
+ }
+ }
+ }
+- return IRQ_HANDLED;
++ spin_unlock_irqrestore(host->host_lock, flags);
++ return IRQ_RETVAL(handled);
+ }
+
+
+@@ -4360,7 +4298,7 @@
+ *
+ * Purpose : Assuming that the NCR SCSI processor is currently
+ * halted, break the currently established nexus. Clean
+- * up of the NCR53c7x0_cmd and Scsi_Cmnd structures should
++ * up of the NCR53c7x0_cmd and scsi_cmnd structures should
+ * be done on receipt of the abort interrupt.
+ *
+ * Inputs : host - SCSI host
+@@ -4899,12 +4837,12 @@
+ /* Don't print instr. until we write DSP at end of intr function */
+ } else if (hostdata->options & OPTION_DEBUG_SINGLE) {
+ print_insn (host, dsp, "s ", 0);
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ /* XXX - should we do this, or can we get away with writing dsp? */
+
+ NCR53c7x0_write8 (DCNTL_REG, (NCR53c7x0_read8(DCNTL_REG) &
+ ~DCNTL_SSM) | DCNTL_STD);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ } else {
+ printk(KERN_ALERT "scsi%d : unexpected single step interrupt at\n"
+ " ", host->host_no);
+@@ -5127,7 +5065,7 @@
+ }
+
+ /*
+- * Function : int NCR53c7xx_abort (Scsi_Cmnd *cmd)
++ * Function : int NCR53c7xx_abort (struct scsi_cmnd *cmd)
+ *
+ * Purpose : Abort an errant SCSI command, doing all necessary
+ * cleanup of the issue_queue, running_list, shared Linux/NCR
+@@ -5139,14 +5077,14 @@
+ */
+
+ int
+-NCR53c7xx_abort (Scsi_Cmnd *cmd) {
++NCR53c7xx_abort (struct scsi_cmnd *cmd) {
+ NCR53c7x0_local_declare();
+ struct Scsi_Host *host = cmd->device->host;
+ struct NCR53c7x0_hostdata *hostdata = host ? (struct NCR53c7x0_hostdata *)
+ host->hostdata[0] : NULL;
+ unsigned long flags;
+ struct NCR53c7x0_cmd *curr, **prev;
+- Scsi_Cmnd *me, **last;
++ struct scsi_cmnd *me, **last;
+ #if 0
+ static long cache_pid = -1;
+ #endif
+@@ -5155,10 +5093,10 @@
+ if (!host) {
+ printk ("Bogus SCSI command pid %ld; no host structure\n",
+ cmd->pid);
+- return SCSI_ABORT_ERROR;
++ return FAILED;
+ } else if (!hostdata) {
+ printk ("Bogus SCSI host %d; no hostdata\n", host->host_no);
+- return SCSI_ABORT_ERROR;
++ return FAILED;
+ }
+ NCR53c7x0_local_setup(host);
+
+@@ -5179,10 +5117,10 @@
+ printk ("scsi%d : dropped interrupt for command %ld\n", host->host_no,
+ cmd->pid);
+ NCR53c7x0_intr (host->irq, NULL, NULL);
+- return SCSI_ABORT_BUSY;
++ return FAILED;
+ }
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ #if 0
+ if (cache_pid == cmd->pid)
+ panic ("scsi%d : bloody fetus %d\n", host->host_no, cmd->pid);
+@@ -5201,13 +5139,13 @@
+ * pull the command out of the old queue, and call it aborted.
+ */
+
+- for (me = (Scsi_Cmnd *) hostdata->issue_queue,
+- last = (Scsi_Cmnd **) &(hostdata->issue_queue);
+- me && me != cmd; last = (Scsi_Cmnd **)&(me->SCp.ptr),
+- me = (Scsi_Cmnd *)me->SCp.ptr);
++ for (me = (struct scsi_cmnd *) hostdata->issue_queue,
++ last = (struct scsi_cmnd **) &(hostdata->issue_queue);
++ me && me != cmd; last = (struct scsi_cmnd **)&(me->SCp.ptr),
++ me = (struct scsi_cmnd *)me->SCp.ptr);
+
+ if (me) {
+- *last = (Scsi_Cmnd *) me->SCp.ptr;
++ *last = (struct scsi_cmnd *) me->SCp.ptr;
+ if (me->host_scribble) {
+ ((struct NCR53c7x0_cmd *)me->host_scribble)->next = hostdata->free;
+ hostdata->free = (struct NCR53c7x0_cmd *) me->host_scribble;
+@@ -5217,9 +5155,9 @@
+ cmd->scsi_done(cmd);
+ printk ("scsi%d : found command %ld in Linux issue queue\n",
+ host->host_no, me->pid);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ run_process_issue_queue();
+- return SCSI_ABORT_SUCCESS;
++ return SUCCESS;
+ }
+
+ /*
+@@ -5243,13 +5181,13 @@
+ cmd->scsi_done(cmd);
+ printk ("scsi%d : found finished command %ld in running list\n",
+ host->host_no, cmd->pid);
+- local_irq_restore(flags);
+- return SCSI_ABORT_NOT_RUNNING;
++ spin_unlock_irqrestore(host->host_lock, flags);
++ return SUCCESS;
+ } else {
+ printk ("scsi%d : DANGER : command running, can not abort.\n",
+ cmd->device->host->host_no);
+- local_irq_restore(flags);
+- return SCSI_ABORT_BUSY;
++ spin_unlock_irqrestore(host->host_lock, flags);
++ return FAILED;
+ }
+ }
+
+@@ -5280,21 +5218,20 @@
+ */
+ --hostdata->busy[cmd->device->id][cmd->device->lun];
+ }
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ cmd->scsi_done(cmd);
+
+ /*
+ * We need to run process_issue_queue since termination of this command
+ * may allow another queued command to execute first?
+ */
+- return SCSI_ABORT_NOT_RUNNING;
++ return SUCCESS;
+ }
+
+ /*
+- * Function : int NCR53c7xx_reset (Scsi_Cmnd *cmd)
++ * Function : int NCR53c7xx_reset (struct scsi_cmnd *cmd)
+ *
+- * Purpose : perform a hard reset of the SCSI bus and NCR
+- * chip.
++ * Purpose : perform a hard reset of the SCSI bus.
+ *
+ * Inputs : cmd - command which caused the SCSI RESET
+ *
+@@ -5302,12 +5239,12 @@
+ */
+
+ int
+-NCR53c7xx_reset (Scsi_Cmnd *cmd, unsigned int reset_flags) {
++NCR53c7xx_reset (struct scsi_cmnd *cmd) {
+ NCR53c7x0_local_declare();
+ unsigned long flags;
+ int found = 0;
+ struct NCR53c7x0_cmd * c;
+- Scsi_Cmnd *tmp;
++ struct scsi_cmnd *tmp;
+ /*
+ * When we call scsi_done(), it's going to wake up anything sleeping on the
+ * resources which were in use by the aborted commands, and we'll start to
+@@ -5322,19 +5259,19 @@
+ * pointer), do our reinitialization, and then call the done function for
+ * each command.
+ */
+- Scsi_Cmnd *nuke_list = NULL;
++ struct scsi_cmnd *nuke_list = NULL;
+ struct Scsi_Host *host = cmd->device->host;
+ struct NCR53c7x0_hostdata *hostdata =
+ (struct NCR53c7x0_hostdata *) host->hostdata[0];
+
+ NCR53c7x0_local_setup(host);
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ ncr_halt (host);
+ print_lots (host);
+ dump_events (host, 30);
+ ncr_scsi_reset (host);
+ for (tmp = nuke_list = return_outstanding_commands (host, 1 /* free */,
+- 0 /* issue */ ); tmp; tmp = (Scsi_Cmnd *) tmp->SCp.buffer)
++ 0 /* issue */ ); tmp; tmp = (struct scsi_cmnd *) tmp->SCp.buffer)
+ if (tmp == cmd) {
+ found = 1;
+ break;
+@@ -5357,19 +5294,21 @@
+ }
+
+ NCR53c7x0_driver_init (host);
++#if 0
+ hostdata->soft_reset (host);
++#endif
+ if (hostdata->resets == 0)
+ disable(host);
+ else if (hostdata->resets != -1)
+ --hostdata->resets;
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ for (; nuke_list; nuke_list = tmp) {
+- tmp = (Scsi_Cmnd *) nuke_list->SCp.buffer;
++ tmp = (struct scsi_cmnd *) nuke_list->SCp.buffer;
+ nuke_list->result = DID_RESET << 16;
+ nuke_list->scsi_done (nuke_list);
+ }
+- local_irq_restore(flags);
+- return SCSI_RESET_SUCCESS;
++ spin_unlock_irqrestore(host->host_lock, flags);
++ return SUCCESS;
+ }
+
+ /*
+@@ -5378,7 +5317,7 @@
+ */
+
+ /*
+- * Function : int insn_to_offset (Scsi_Cmnd *cmd, u32 *insn)
++ * Function : int insn_to_offset (struct scsi_cmnd *cmd, u32 *insn)
+ *
+ * Purpose : convert instructions stored at NCR pointer into data
+ * pointer offset.
+@@ -5391,7 +5330,7 @@
+
+
+ static int
+-insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) {
++insn_to_offset (struct scsi_cmnd *cmd, u32 *insn) {
+ struct NCR53c7x0_hostdata *hostdata =
+ (struct NCR53c7x0_hostdata *) cmd->device->host->hostdata[0];
+ struct NCR53c7x0_cmd *ncmd =
+@@ -5445,7 +5384,7 @@
+
+
+ /*
+- * Function : void print_progress (Scsi_Cmnd *cmd)
++ * Function : void print_progress (struct scsi_cmnd *cmd)
+ *
+ * Purpose : print the current location of the saved data pointer
+ *
+@@ -5454,7 +5393,7 @@
+ */
+
+ static void
+-print_progress (Scsi_Cmnd *cmd) {
++print_progress (struct scsi_cmnd *cmd) {
+ NCR53c7x0_local_declare();
+ struct NCR53c7x0_cmd *ncmd =
+ (struct NCR53c7x0_cmd *) cmd->host_scribble;
+@@ -5512,7 +5451,7 @@
+ host->hostdata[0];
+ int i, len;
+ char *ptr;
+- Scsi_Cmnd *cmd;
++ struct scsi_cmnd *cmd;
+
+ if (check_address ((unsigned long) dsa, hostdata->dsa_end -
+ hostdata->dsa_start) == -1) {
+@@ -5548,7 +5487,7 @@
+
+ printk(" + %d : select_indirect = 0x%x\n",
+ hostdata->dsa_select, dsa[hostdata->dsa_select / sizeof(u32)]);
+- cmd = (Scsi_Cmnd *) bus_to_virt(dsa[hostdata->dsa_cmnd / sizeof(u32)]);
++ cmd = (struct scsi_cmnd *) bus_to_virt(dsa[hostdata->dsa_cmnd / sizeof(u32)]);
+ printk(" + %d : dsa_cmnd = 0x%x ", hostdata->dsa_cmnd,
+ (u32) virt_to_bus(cmd));
+ /* XXX Maybe we should access cmd->host_scribble->result here. RGH */
+@@ -5588,16 +5527,16 @@
+ u32 *dsa, *next_dsa;
+ volatile u32 *ncrcurrent;
+ int left;
+- Scsi_Cmnd *cmd, *next_cmd;
++ struct scsi_cmnd *cmd, *next_cmd;
+ unsigned long flags;
+
+ printk ("scsi%d : issue queue\n", host->host_no);
+
+- for (left = host->can_queue, cmd = (Scsi_Cmnd *) hostdata->issue_queue;
++ for (left = host->can_queue, cmd = (struct scsi_cmnd *) hostdata->issue_queue;
+ left >= 0 && cmd;
+ cmd = next_cmd) {
+- next_cmd = (Scsi_Cmnd *) cmd->SCp.ptr;
+- local_irq_save(flags);
++ next_cmd = (struct scsi_cmnd *) cmd->SCp.ptr;
++ spin_lock_irqsave(host->host_lock, flags);
+ if (cmd->host_scribble) {
+ if (check_address ((unsigned long) (cmd->host_scribble),
+ sizeof (cmd->host_scribble)) == -1)
+@@ -5610,7 +5549,7 @@
+ } else
+ printk ("scsi%d : scsi pid %ld for target %d lun %d has no NCR53c7x0_cmd\n",
+ host->host_no, cmd->pid, cmd->device->id, cmd->device->lun);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+
+ if (left <= 0) {
+@@ -5642,7 +5581,7 @@
+ dsa = bus_to_virt (hostdata->reconnect_dsa_head);
+ left >= 0 && dsa;
+ dsa = next_dsa) {
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ if (check_address ((unsigned long) dsa, sizeof(dsa)) == -1) {
+ printk ("scsi%d: bad DSA pointer 0x%p", host->host_no,
+ dsa);
+@@ -5653,7 +5592,7 @@
+ next_dsa = bus_to_virt(dsa[hostdata->dsa_next / sizeof(u32)]);
+ print_dsa (host, dsa, "");
+ }
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+ printk ("scsi%d : end reconnect_dsa_head\n", host->host_no);
+ if (left < 0)
+@@ -5743,14 +5682,14 @@
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+ NCR53c7x0_local_setup(host);
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ /* Get in a state where we can reset the SCSI bus */
+ ncr_halt (host);
+ ncr_scsi_reset (host);
+ hostdata->soft_reset(host);
+
+ disable (host);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+ }
+
+@@ -5765,11 +5704,11 @@
+ NCR53c7x0_local_declare();
+ unsigned long flags;
+ NCR53c7x0_local_setup(host);
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ NCR53c7x0_write8(SCNTL1_REG, SCNTL1_RST);
+ udelay(25); /* Minimum amount of time to assert RST */
+ NCR53c7x0_write8(SCNTL1_REG, 0);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+
+ /*
+@@ -5782,26 +5721,26 @@
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+ unsigned long flags;
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ ncr_scsi_reset(host);
+ NCR53c7x0_driver_init (host);
+ if (hostdata->soft_reset)
+ hostdata->soft_reset (host);
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ }
+
+
+ /*
+- * Function : Scsi_Cmnd *return_outstanding_commands (struct Scsi_Host *host,
++ * Function : struct scsi_cmnd *return_outstanding_commands (struct Scsi_Host *host,
+ * int free, int issue)
+ *
+ * Purpose : return a linked list (using the SCp.buffer field as next,
+ * so we don't perturb hostdata. We don't use a field of the
+ * NCR53c7x0_cmd structure since we may not have allocated one
+- * for the command causing the reset.) of Scsi_Cmnd structures that
++ * for the command causing the reset.) of scsi_cmnd structures that
+ * had propagated below the Linux issue queue level. If free is set,
+ * free the NCR53c7x0_cmd structures which are associated with
+- * the Scsi_Cmnd structures, and clean up any internal
++ * the scsi_cmnd structures, and clean up any internal
+ * NCR lists that the commands were on. If issue is set,
+ * also return commands in the issue queue.
+ *
+@@ -5811,14 +5750,14 @@
+ * if the free flag is set.
+ */
+
+-static Scsi_Cmnd *
++static struct scsi_cmnd *
+ return_outstanding_commands (struct Scsi_Host *host, int free, int issue) {
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+ struct NCR53c7x0_cmd *c;
+ int i;
+ u32 *ncrcurrent;
+- Scsi_Cmnd *list = NULL, *tmp;
++ struct scsi_cmnd *list = NULL, *tmp, *next_cmd;
+ for (c = (struct NCR53c7x0_cmd *) hostdata->running_list; c;
+ c = (struct NCR53c7x0_cmd *) c->next) {
+ if (c->cmd->SCp.buffer) {
+@@ -5847,7 +5786,9 @@
+ }
+
+ if (issue) {
+- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp; tmp = tmp->next) {
++ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; tmp = next_cmd) {
++ next_cmd = (struct scsi_cmnd *) tmp->SCp.ptr;
++
+ if (tmp->SCp.buffer) {
+ printk ("scsi%d : loop detected in issue queue!\n",
+ host->host_no);
+@@ -5882,17 +5823,17 @@
+ struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
+ host->hostdata[0];
+ unsigned long flags;
+- Scsi_Cmnd *nuke_list, *tmp;
+- local_irq_save(flags);
++ struct scsi_cmnd *nuke_list, *tmp;
++ spin_lock_irqsave(host->host_lock, flags);
+ if (hostdata->state != STATE_HALTED)
+ ncr_halt (host);
+ nuke_list = return_outstanding_commands (host, 1 /* free */, 1 /* issue */);
+ hard_reset (host);
+ hostdata->state = STATE_DISABLED;
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ printk ("scsi%d : nuking commands\n", host->host_no);
+ for (; nuke_list; nuke_list = tmp) {
+- tmp = (Scsi_Cmnd *) nuke_list->SCp.buffer;
++ tmp = (struct scsi_cmnd *) nuke_list->SCp.buffer;
+ nuke_list->result = DID_ERROR << 16;
+ nuke_list->scsi_done(nuke_list);
+ }
+@@ -5922,7 +5863,7 @@
+ int stage;
+ NCR53c7x0_local_setup(host);
+
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ /* Stage 0 : eat all interrupts
+ Stage 1 : set ABORT
+ Stage 2 : eat all but abort interrupts
+@@ -5957,7 +5898,7 @@
+ }
+ }
+ hostdata->state = STATE_HALTED;
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ #if 0
+ print_lots (host);
+ #endif
+@@ -6011,7 +5952,7 @@
+ * still be guaranteed that they're happening on the same
+ * event structure.
+ */
+- local_irq_save(flags);
++ spin_lock_irqsave(host->host_lock, flags);
+ #if 0
+ event = hostdata->events[i];
+ #else
+@@ -6019,7 +5960,7 @@
+ sizeof(event));
+ #endif
+
+- local_irq_restore(flags);
++ spin_unlock_irqrestore(host->host_lock, flags);
+ printk ("scsi%d : %s event %d at %ld secs %ld usecs target %d lun %d\n",
+ host->host_no, event_name (event.event), count,
+ (long) event.time.tv_sec, (long) event.time.tv_usec,
+@@ -6054,6 +5995,72 @@
+ return (virt_to_phys((void *)addr) < PAGE_SIZE || virt_to_phys((void *)(addr + size)) > virt_to_phys(high_memory) ? -1 : 0);
+ }
+
++int
++NCR53c7xx_slave_configure(struct scsi_device *sdev) {
++ struct Scsi_Host *host = sdev->host;
++ struct NCR53c7x0_hostdata *hostdata =
++ (struct NCR53c7x0_hostdata *) host->hostdata[0];
++ struct NCR53c7x0_cmd *tmp;
++ u32 real; /* Real address */
++ int size; /* Size of *tmp */
++ unsigned long flags;
++ int extra_allocate = 0;
++
++/*
++ * Reserve commands for this I_T_L nexus.
++ */
++ if (hostdata->num_cmds < host->can_queue)
++ extra_allocate = host->cmd_per_lun;
++
++ for (; extra_allocate > 0 ; --extra_allocate,
++ ++hostdata->num_cmds) {
++ /* historically, kmalloc has returned unaligned addresses; pad so we
++ have enough room to ROUNDUP */
++ size = hostdata->max_cmd_size + sizeof (void *);
++#ifdef FORCE_DSA_ALIGNMENT
++ /*
++ * 53c710 rev.0 doesn't have an add-with-carry instruction.
++ * Ensure we allocate enough memory to force alignment.
++ */
++ size += 256;
++#endif
++/* FIXME: for ISA bus '7xx chips, we need to or GFP_DMA in here */
++
++ if (size > 4096) {
++ printk (KERN_ERR "53c7xx: slave_configure size > 4K\n");
++ return -ENOMEM;
++ }
++ real = get_zeroed_page(GFP_ATOMIC);
++ if (real == 0)
++ return -ENOMEM;
++ memset((void *)real, 0, 4096);
++ cache_push(virt_to_phys((void *)real), 4096);
++ cache_clear(virt_to_phys((void *)real), 4096);
++ kernel_set_cachemode((void *)real, 4096, IOMAP_NOCACHE_SER);
++ tmp = ROUNDUP(real, void *);
++#ifdef FORCE_DSA_ALIGNMENT
++ {
++ if (((u32)tmp & 0xff) > CmdPageStart)
++ tmp = (struct NCR53c7x0_cmd *)((u32)tmp + 255);
++ tmp = (struct NCR53c7x0_cmd *)(((u32)tmp & ~0xff) + CmdPageStart);
++#if 0
++ printk ("scsi: size = %d, real = 0x%08x, tmp set to 0x%08x\n",
++ size, real, (u32)tmp);
++#endif
++ }
++#endif
++ tmp->real = (void *)real;
++ tmp->size = size;
++ tmp->free = ((void (*)(void *, int)) my_free_page);
++ spin_lock_irqsave(host->host_lock, flags);
++ tmp->next = hostdata->free;
++ hostdata->free = tmp;
++ spin_unlock_irqrestore(host->host_lock, flags);
++ }
++
++ return 0;
++}
++
+ #ifdef MODULE
+ int
+ NCR53c7x0_release(struct Scsi_Host *host) {
+@@ -6063,19 +6070,22 @@
+ shutdown (host);
+ if (host->irq != SCSI_IRQ_NONE)
+ {
+- int irq_count;
+- struct Scsi_Host *tmp;
+- for (irq_count = 0, tmp = first_host; tmp; tmp = tmp->next)
+- if (tmp->hostt == the_template && tmp->irq == host->irq)
++ int irq_count = 0;
++ struct Scsi_Host *tmp, *s;
++ list_for_each_entry_safe(tmp, s, &the_template->legacy_hosts, sht_legacy_list) {
++ if (tmp->irq == host->irq)
+ ++irq_count;
++ }
+ if (irq_count == 1)
+ free_irq(host->irq, NULL);
+ }
++#ifdef CONFIG_ISA
+ if (host->dma_channel != DMA_NONE)
+ free_dma(host->dma_channel);
++#endif
+ if (host->io_port)
+ release_region(host->io_port, host->n_io_port);
+-
++
+ for (cmd = (struct NCR53c7x0_cmd *) hostdata->free; cmd; cmd = tmp,
+ --hostdata->num_cmds) {
+ tmp = (struct NCR53c7x0_cmd *) cmd->next;
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/53c7xx.h linux-2.6.12/drivers/scsi/53c7xx.h
+--- linux-2.6.12-i386/drivers/scsi/53c7xx.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/53c7xx.h 2004-10-30 16:35:43.000000000 +0200
+@@ -997,7 +997,7 @@
+ u32 *dsa; /* What's in the DSA register now (virt) */
+ /*
+ * A few things from that SCSI pid so we know what happened after
+- * the Scsi_Cmnd structure in question may have disappeared.
++ * the scsi_cmnd structure in question may have disappeared.
+ */
+ unsigned long pid; /* The SCSI PID which caused this
+ event */
+@@ -1029,8 +1029,8 @@
+ void (* free)(void *, int); /* Command to deallocate; NULL
+ for structures allocated with
+ scsi_register, etc. */
+- Scsi_Cmnd *cmd; /* Associated Scsi_Cmnd
+- structure, Scsi_Cmnd points
++ struct scsi_cmnd *cmd; /* Associated scsi_cmnd
++ structure, scsi_cmnd points
+ at NCR53c7x0_cmd using
+ host_scribble structure */
+
+@@ -1039,8 +1039,8 @@
+
+ int flags; /* CMD_* flags */
+
+- unsigned char cmnd[12]; /* CDB, copied from Scsi_Cmnd */
+- int result; /* Copy to Scsi_Cmnd when done */
++ unsigned char cmnd[12]; /* CDB, copied from scsi_cmnd */
++ int result; /* Copy to scsi_cmnd when done */
+
+ struct { /* Private non-cached bounce buffer */
+ unsigned char buf[256];
+@@ -1339,7 +1339,7 @@
+ volatile struct NCR53c7x0_synchronous sync[16]
+ __attribute__ ((aligned (4)));
+
+- volatile Scsi_Cmnd *issue_queue
++ volatile struct scsi_cmnd *issue_queue
+ __attribute__ ((aligned (4)));
+ /* waiting to be issued by
+ Linux driver */
+@@ -1363,10 +1363,6 @@
+ */
+ volatile int num_cmds; /* Number of commands
+ allocated */
+- volatile int extra_allocate;
+- volatile unsigned char cmd_allocated[16]; /* Have we allocated commands
+- for this target yet? If not,
+- do so ASAP */
+ volatile unsigned char busy[16][8]; /* number of commands
+ executing on each target
+ */
+@@ -1589,20 +1585,26 @@
+ /* Patch field in dsa structure (assignment should be +=?) */
+ #define patch_dsa_32(dsa, symbol, word, value) \
+ { \
+- (dsa)[(hostdata->##symbol - hostdata->dsa_start) / sizeof(u32) \
++ (dsa)[(hostdata->symbol - hostdata->dsa_start) / sizeof(u32) \
+ + (word)] = (value); \
+ if (hostdata->options & OPTION_DEBUG_DSA) \
+ printk("scsi : dsa %s symbol %s(%d) word %d now 0x%x\n", \
+- #dsa, #symbol, hostdata->##symbol, \
++ #dsa, #symbol, hostdata->symbol, \
+ (word), (u32) (value)); \
+ }
+
+ /* Paranoid people could use panic() here. */
+ #define FATAL(host) shutdown((host));
+
+-extern int ncr53c7xx_init(Scsi_Host_Template *tpnt, int board, int chip,
++extern int ncr53c7xx_init(struct scsi_host_template *tpnt, int board, int chip,
+ unsigned long base, int io_port, int irq, int dma,
+ long long options, int clock);
++extern const char *NCR53c7x0_info(void);
++extern int NCR53c7xx_queue_command(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
++extern int NCR53c7xx_abort(struct scsi_cmnd *);
++extern int NCR53c7x0_release (struct Scsi_Host *);
++extern int NCR53c7xx_reset(struct scsi_cmnd *);
++extern int NCR53c7xx_slave_configure(struct scsi_device *);
+
+ #endif /* NCR53c710_C */
+ #endif /* NCR53c710_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/Kconfig linux-2.6.12/drivers/scsi/Kconfig
+--- linux-2.6.12-i386/drivers/scsi/Kconfig 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/Kconfig 2005-06-19 16:34:18.000000000 +0200
+@@ -1631,7 +1631,7 @@
+
+ config SCSI_AMIGA7XX
+ bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
+- depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
++ depends on AMIGA && SCSI && EXPERIMENTAL
+ help
+ Support for various NCR53c710-based SCSI controllers on the Amiga.
+ This includes:
+@@ -1728,7 +1728,7 @@
+
+ config MVME16x_SCSI
+ bool "NCR53C710 SCSI driver for MVME16x"
+- depends on MVME16x && SCSI && BROKEN
++ depends on MVME16x && SCSI
+ help
+ The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
+ SCSI controller chip. Almost everyone using one of these boards
+@@ -1736,7 +1736,7 @@
+
+ config BVME6000_SCSI
+ bool "NCR53C710 SCSI driver for BVME6000"
+- depends on BVME6000 && SCSI && BROKEN
++ depends on BVME6000 && SCSI
+ help
+ The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
+ SCSI controller chip. Almost everyone using one of these boards
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/NCR5380.c linux-2.6.12/drivers/scsi/NCR5380.c
+--- linux-2.6.12-i386/drivers/scsi/NCR5380.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/NCR5380.c 2005-06-19 16:34:18.000000000 +0200
+@@ -346,6 +346,7 @@
+ return -ETIMEDOUT;
+ }
+
++#ifdef NDEBUG
+ static struct {
+ unsigned char value;
+ const char *name;
+@@ -359,7 +360,6 @@
+ {PHASE_UNKNOWN, "UNKNOWN"}
+ };
+
+-#ifdef NDEBUG
+ static struct {
+ unsigned char mask;
+ const char *name;
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/amiga7xx.c linux-2.6.12/drivers/scsi/amiga7xx.c
+--- linux-2.6.12-i386/drivers/scsi/amiga7xx.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/amiga7xx.c 2004-10-30 16:35:43.000000000 +0200
+@@ -27,8 +27,14 @@
+ #include "scsi.h"
+ #include <scsi/scsi_host.h>
+ #include "53c7xx.h"
+-#include "amiga7xx.h"
+
++#ifndef CMD_PER_LUN
++#define CMD_PER_LUN 3
++#endif
++
++#ifndef CAN_QUEUE
++#define CAN_QUEUE 24
++#endif
+
+ static int amiga7xx_register_one(Scsi_Host_Template *tpnt,
+ unsigned long address)
+@@ -115,8 +121,10 @@
+ {
+ if (shost->irq)
+ free_irq(shost->irq, NULL);
++#ifdef CONFIG_ISA
+ if (shost->dma_channel != 0xff)
+ free_dma(shost->dma_channel);
++#endif
+ if (shost->io_port && shost->n_io_port)
+ release_region(shost->io_port, shost->n_io_port);
+ scsi_unregister(shost);
+@@ -128,8 +136,9 @@
+ .detect = amiga7xx_detect,
+ .release = amiga7xx_release,
+ .queuecommand = NCR53c7xx_queue_command,
+- .abort = NCR53c7xx_abort,
+- .reset = NCR53c7xx_reset,
++ .eh_abort_handler = NCR53c7xx_abort,
++ .eh_bus_reset_handler = NCR53c7xx_reset,
++ .slave_configure = NCR53c7xx_slave_configure,
+ .can_queue = 24,
+ .this_id = 7,
+ .sg_tablesize = 63,
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/amiga7xx.h linux-2.6.12/drivers/scsi/amiga7xx.h
+--- linux-2.6.12-i386/drivers/scsi/amiga7xx.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/amiga7xx.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,23 +0,0 @@
+-#ifndef AMIGA7XX_H
+-
+-#include <linux/types.h>
+-
+-int amiga7xx_detect(Scsi_Host_Template *);
+-const char *NCR53c7x0_info(void);
+-int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+-int NCR53c7xx_abort(Scsi_Cmnd *);
+-int NCR53c7x0_release (struct Scsi_Host *);
+-int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
+-void NCR53c7x0_intr(int irq, void *dev_id, struct pt_regs * regs);
+-
+-#ifndef CMD_PER_LUN
+-#define CMD_PER_LUN 3
+-#endif
+-
+-#ifndef CAN_QUEUE
+-#define CAN_QUEUE 24
+-#endif
+-
+-#include <scsi/scsicam.h>
+-
+-#endif /* AMIGA7XX_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/bvme6000.c linux-2.6.12/drivers/scsi/bvme6000.c
+--- linux-2.6.12-i386/drivers/scsi/bvme6000.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/bvme6000.c 2004-10-30 16:35:43.000000000 +0200
+@@ -19,10 +19,16 @@
+ #include "scsi.h"
+ #include <scsi/scsi_host.h>
+ #include "53c7xx.h"
+-#include "bvme6000.h"
+
+ #include<linux/stat.h>
+
++#ifndef CMD_PER_LUN
++#define CMD_PER_LUN 3
++#endif
++
++#ifndef CAN_QUEUE
++#define CAN_QUEUE 24
++#endif
+
+ int bvme6000_scsi_detect(Scsi_Host_Template *tpnt)
+ {
+@@ -52,8 +58,10 @@
+ {
+ if (shost->irq)
+ free_irq(shost->irq, NULL);
++#ifdef CONFIG_ISA
+ if (shost->dma_channel != 0xff)
+ free_dma(shost->dma_channel);
++#endif
+ if (shost->io_port && shost->n_io_port)
+ release_region(shost->io_port, shost->n_io_port);
+ scsi_unregister(shost);
+@@ -65,8 +73,9 @@
+ .detect = bvme6000_scsi_detect,
+ .release = bvme6000_scsi_release,
+ .queuecommand = NCR53c7xx_queue_command,
+- .abort = NCR53c7xx_abort,
+- .reset = NCR53c7xx_reset,
++ .eh_abort_handler = NCR53c7xx_abort,
++ .eh_bus_reset_handler = NCR53c7xx_reset,
++ .slave_configure = NCR53c7xx_slave_configure,
+ .can_queue = 24,
+ .this_id = 7,
+ .sg_tablesize = 63,
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/bvme6000.h linux-2.6.12/drivers/scsi/bvme6000.h
+--- linux-2.6.12-i386/drivers/scsi/bvme6000.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/bvme6000.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,24 +0,0 @@
+-#ifndef BVME6000_SCSI_H
+-#define BVME6000_SCSI_H
+-
+-#include <linux/types.h>
+-
+-int bvme6000_scsi_detect(Scsi_Host_Template *);
+-const char *NCR53c7x0_info(void);
+-int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+-int NCR53c7xx_abort(Scsi_Cmnd *);
+-int NCR53c7x0_release (struct Scsi_Host *);
+-int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
+-void NCR53c7x0_intr(int irq, void *dev_id, struct pt_regs * regs);
+-
+-#ifndef CMD_PER_LUN
+-#define CMD_PER_LUN 3
+-#endif
+-
+-#ifndef CAN_QUEUE
+-#define CAN_QUEUE 24
+-#endif
+-
+-#include <scsi/scsicam.h>
+-
+-#endif /* BVME6000_SCSI_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/mvme16x.c linux-2.6.12/drivers/scsi/mvme16x.c
+--- linux-2.6.12-i386/drivers/scsi/mvme16x.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/mvme16x.c 2004-10-30 16:35:43.000000000 +0200
+@@ -17,10 +17,16 @@
+ #include "scsi.h"
+ #include <scsi/scsi_host.h>
+ #include "53c7xx.h"
+-#include "mvme16x.h"
+
+ #include<linux/stat.h>
+
++#ifndef CMD_PER_LUN
++#define CMD_PER_LUN 3
++#endif
++
++#ifndef CAN_QUEUE
++#define CAN_QUEUE 24
++#endif
+
+ int mvme16x_scsi_detect(Scsi_Host_Template *tpnt)
+ {
+@@ -54,8 +60,10 @@
+ {
+ if (shost->irq)
+ free_irq(shost->irq, NULL);
++#ifdef CONFIG_ISA
+ if (shost->dma_channel != 0xff)
+ free_dma(shost->dma_channel);
++#endif
+ if (shost->io_port && shost->n_io_port)
+ release_region(shost->io_port, shost->n_io_port);
+ scsi_unregister(shost);
+@@ -67,8 +75,9 @@
+ .detect = mvme16x_scsi_detect,
+ .release = mvme16x_scsi_release,
+ .queuecommand = NCR53c7xx_queue_command,
+- .abort = NCR53c7xx_abort,
+- .reset = NCR53c7xx_reset,
++ .eh_abort_handler = NCR53c7xx_abort,
++ .eh_bus_reset_handler = NCR53c7xx_reset,
++ .slave_configure = NCR53c7xx_slave_configure,
+ .can_queue = 24,
+ .this_id = 7,
+ .sg_tablesize = 63,
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/drivers/scsi/mvme16x.h linux-2.6.12/drivers/scsi/mvme16x.h
+--- linux-2.6.12-i386/drivers/scsi/mvme16x.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/drivers/scsi/mvme16x.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,24 +0,0 @@
+-#ifndef MVME16x_SCSI_H
+-#define MVME16x_SCSI_H
+-
+-#include <linux/types.h>
+-
+-int mvme16x_scsi_detect(Scsi_Host_Template *);
+-const char *NCR53c7x0_info(void);
+-int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+-int NCR53c7xx_abort(Scsi_Cmnd *);
+-int NCR53c7x0_release (struct Scsi_Host *);
+-int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
+-void NCR53c7x0_intr(int irq, void *dev_id, struct pt_regs * regs);
+-
+-#ifndef CMD_PER_LUN
+-#define CMD_PER_LUN 3
+-#endif
+-
+-#ifndef CAN_QUEUE
+-#define CAN_QUEUE 24
+-#endif
+-
+-#include <scsi/scsicam.h>
+-
+-#endif /* MVME16x_SCSI_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/fs/binfmt_aout.c linux-2.6.12/fs/binfmt_aout.c
+--- linux-2.6.12-i386/fs/binfmt_aout.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/fs/binfmt_aout.c 2005-06-19 16:35:04.000000000 +0200
+@@ -368,8 +368,9 @@
+ send_sig(SIGKILL, current, 0);
+ return error;
+ }
+-
+- flush_icache_range(text_addr, text_addr+ex.a_text+ex.a_data);
++
++ flush_icache_user_range((void *)text_addr,
++ ex.a_text + ex.a_data);
+ } else {
+ static unsigned long error_time, error_time2;
+ if ((ex.a_text & 0xfff || ex.a_data & 0xfff) &&
+@@ -396,9 +397,8 @@
+ bprm->file->f_op->read(bprm->file,
+ (char __user *)N_TXTADDR(ex),
+ ex.a_text+ex.a_data, &pos);
+- flush_icache_range((unsigned long) N_TXTADDR(ex),
+- (unsigned long) N_TXTADDR(ex) +
+- ex.a_text+ex.a_data);
++ flush_icache_user_range((void *)N_TXTADDR(ex),
++ ex.a_text + ex.a_data);
+ goto beyond_if;
+ }
+
+@@ -503,8 +503,8 @@
+
+ file->f_op->read(file, (char __user *)start_addr,
+ ex.a_text + ex.a_data, &pos);
+- flush_icache_range((unsigned long) start_addr,
+- (unsigned long) start_addr + ex.a_text + ex.a_data);
++ flush_icache_user_range((void *)start_addr,
++ ex.a_text + ex.a_data);
+
+ retval = 0;
+ goto out;
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/fs/binfmt_elf.c linux-2.6.12/fs/binfmt_elf.c
+--- linux-2.6.12-i386/fs/binfmt_elf.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/fs/binfmt_elf.c 2005-06-19 16:35:04.000000000 +0200
+@@ -471,8 +471,7 @@
+ goto out;
+ if (interpreter->f_op->read(interpreter, addr, text_data, &offset) < 0)
+ goto out;
+- flush_icache_range((unsigned long)addr,
+- (unsigned long)addr + text_data);
++ flush_icache_user_range(addr, text_data);
+
+
+ down_write(¤t->mm->mmap_sem);
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/fs/fat/inode.c linux-2.6.12/fs/fat/inode.c
+--- linux-2.6.12-i386/fs/fat/inode.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/fs/fat/inode.c 2005-06-19 16:35:11.000000000 +0200
+@@ -11,12 +11,14 @@
+ */
+
+ #include <linux/module.h>
++#include <linux/config.h>
+ #include <linux/init.h>
+ #include <linux/time.h>
+ #include <linux/slab.h>
+ #include <linux/smp_lock.h>
+ #include <linux/seq_file.h>
+ #include <linux/msdos_fs.h>
++#include <linux/major.h>
+ #include <linux/pagemap.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mount.h>
+@@ -751,7 +753,7 @@
+ Opt_check_n, Opt_check_r, Opt_check_s, Opt_uid, Opt_gid,
+ Opt_umask, Opt_dmask, Opt_fmask, Opt_codepage, Opt_nocase,
+ Opt_quiet, Opt_showexec, Opt_debug, Opt_immutable,
+- Opt_dots, Opt_nodots,
++ Opt_dots, Opt_nodots, Opt_atari_no, Opt_atari_yes,
+ Opt_charset, Opt_shortname_lower, Opt_shortname_win95,
+ Opt_shortname_winnt, Opt_shortname_mixed, Opt_utf8_no, Opt_utf8_yes,
+ Opt_uni_xl_no, Opt_uni_xl_yes, Opt_nonumtail_no, Opt_nonumtail_yes,
+@@ -776,6 +778,9 @@
+ {Opt_showexec, "showexec"},
+ {Opt_debug, "debug"},
+ {Opt_immutable, "sys_immutable"},
++ {Opt_atari_yes, "atari=yes"},
++ {Opt_atari_yes, "atari"},
++ {Opt_atari_no, "atari=no"},
+ {Opt_obsolate, "conv=binary"},
+ {Opt_obsolate, "conv=text"},
+ {Opt_obsolate, "conv=auto"},
+@@ -850,6 +855,13 @@
+ opts->utf8 = opts->unicode_xlate = 0;
+ opts->numtail = 1;
+ opts->nocase = 0;
++ opts->atari = 0;
++
++#ifdef CONFIG_ATARI
++ if(MACH_IS_ATARI)
++ /* make Atari GEMDOS format the default if machine is an Atari */
++ opts->atari = 1;
++#endif
+ *debug = 0;
+
+ if (!options)
+@@ -898,6 +910,12 @@
+ case Opt_immutable:
+ opts->sys_immutable = 1;
+ break;
++ case Opt_atari_yes:
++ opts->atari = 1;
++ break;
++ case Opt_atari_no:
++ opts->atari = 0;
++ break;
+ case Opt_uid:
+ if (match_int(&args[0], &option))
+ return 0;
+@@ -1230,8 +1248,31 @@
+
+ total_clusters = (total_sectors - sbi->data_start) / sbi->sec_per_clus;
+
+- if (sbi->fat_bits != 32)
+- sbi->fat_bits = (total_clusters > MAX_FAT12) ? 16 : 12;
++ if (!sbi->options.atari) {
++ if (sbi->fat_bits != 32)
++ sbi->fat_bits = (total_clusters > MAX_FAT12) ? 16 : 12;
++ } else {
++ int sectors;
++ /* Atari GEMDOS partitions always have 16-bit fat */
++ if (sbi->fat_bits != 32)
++ sbi->fat_bits = 16;
++ /* If more clusters than fat entries in 16-bit fat, we assume
++ * it's a real MSDOS partition with 12-bit fat.
++ */
++ if (sbi->fat_bits != 32 && total_clusters+2 > sbi->
++ fat_length*SECTOR_SIZE*8/sbi->fat_bits)
++ sbi->fat_bits = 12;
++ /* if it's a floppy disk --> 12bit fat */
++ if (sbi->fat_bits != 32 && MAJOR(sb->s_dev) == FLOPPY_MAJOR)
++ sbi->fat_bits = 12;
++ /* if it's a ramdisk or loopback device and has one of the usual
++ * floppy sizes -> 12bit FAT */
++ sectors = total_sectors + sbi->data_start;
++ if (sbi->fat_bits != 32 && (MAJOR(sb->s_dev) == RAMDISK_MAJOR ||
++ MAJOR(sb->s_dev) == LOOP_MAJOR) &&
++ (sectors == 720 || sectors == 1440 || sectors == 2880))
++ sbi->fat_bits = 12;
++ }
+
+ /* check that FAT table does not overflow */
+ fat_clusters = sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits;
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/asm-m68k/cacheflush.h linux-2.6.12/include/asm-m68k/cacheflush.h
+--- linux-2.6.12-i386/include/asm-m68k/cacheflush.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/asm-m68k/cacheflush.h 2005-06-19 16:35:42.000000000 +0200
+@@ -130,20 +130,26 @@
+ #define flush_dcache_mmap_lock(mapping) do { } while (0)
+ #define flush_dcache_mmap_unlock(mapping) do { } while (0)
+ #define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page))
+-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+-
+-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+- do { \
+- flush_cache_page(vma, vaddr, page_to_pfn(page));\
+- memcpy(dst, src, len); \
+- } while (0)
+-
+-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+- do { \
+- flush_cache_page(vma, vaddr, page_to_pfn(page));\
+- memcpy(dst, src, len); \
+- } while (0)
+
++extern void flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
++ unsigned long addr, int len);
+ extern void flush_icache_range(unsigned long address, unsigned long endaddr);
++extern void flush_icache_user_range(void *address, unsigned long size);
++
++static inline void copy_to_user_page(struct vm_area_struct *vma,
++ struct page *page, unsigned long vaddr,
++ void *dst, void *src, int len)
++{
++ flush_cache_page(vma, vaddr, page_to_pfn(page));
++ memcpy(dst, src, len);
++ flush_icache_user_page(vma, page, vaddr, len);
++}
++static inline void copy_from_user_page(struct vm_area_struct *vma,
++ struct page *page, unsigned long vaddr,
++ void *dst, void *src, int len)
++{
++ flush_cache_page(vma, vaddr, page_to_pfn(page));
++ memcpy(dst, src, len);
++}
+
+ #endif /* _M68K_CACHEFLUSH_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/asm-m68k/io.h linux-2.6.12/include/asm-m68k/io.h
+--- linux-2.6.12-i386/include/asm-m68k/io.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/asm-m68k/io.h 2005-06-19 16:35:42.000000000 +0200
+@@ -324,8 +324,6 @@
+ #define writel(val,addr) out_le32((addr),(val))
+ #endif
+
+-#define mmiowb()
+-
+ static inline void *ioremap(unsigned long physaddr, unsigned long size)
+ {
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/asm-m68k/processor.h linux-2.6.12/include/asm-m68k/processor.h
+--- linux-2.6.12-i386/include/asm-m68k/processor.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/asm-m68k/processor.h 2005-05-30 16:33:26.000000000 +0200
+@@ -14,6 +14,7 @@
+ #define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+ #include <linux/config.h>
++#include <linux/thread_info.h>
+ #include <asm/segment.h>
+ #include <asm/fpu.h>
+ #include <asm/ptrace.h>
+@@ -55,17 +56,6 @@
+ #endif
+ #define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
+
+-struct task_work {
+- unsigned char sigpending;
+- unsigned char notify_resume; /* request for notification on
+- userspace execution resumption */
+- char need_resched;
+- unsigned char delayed_trace; /* single step a syscall */
+- unsigned char syscall_trace; /* count of syscall interceptors */
+- unsigned char memdie; /* task was selected to be killed */
+- unsigned char pad[2];
+-};
+-
+ struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+@@ -78,7 +68,7 @@
+ unsigned long fp[8*3];
+ unsigned long fpcntl[3]; /* fp control regs */
+ unsigned char fpstate[FPSTATESIZE]; /* floating point state */
+- struct task_work work;
++ struct thread_info info;
+ };
+
+ #define INIT_THREAD { \
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/asm-m68k/serial.h linux-2.6.12/include/asm-m68k/serial.h
+--- linux-2.6.12-i386/include/asm-m68k/serial.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/asm-m68k/serial.h 2004-07-12 16:39:26.000000000 +0200
+@@ -74,6 +74,8 @@
+ #define EXTRA_SERIAL_PORT_DEFNS
+ #endif
+
++#ifdef CONFIG_ISA
+ #define SERIAL_PORT_DFNS \
+ STD_SERIAL_PORT_DEFNS \
+ EXTRA_SERIAL_PORT_DEFNS
++#endif
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/asm-m68k/thread_info.h linux-2.6.12/include/asm-m68k/thread_info.h
+--- linux-2.6.12-i386/include/asm-m68k/thread_info.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/asm-m68k/thread_info.h 2005-05-31 16:33:46.000000000 +0200
+@@ -2,17 +2,15 @@
+ #define _ASM_M68K_THREAD_INFO_H
+
+ #include <asm/types.h>
+-#include <asm/processor.h>
+ #include <asm/page.h>
+
+ struct thread_info {
+ struct task_struct *task; /* main task structure */
++ unsigned long flags;
+ struct exec_domain *exec_domain; /* execution domain */
+ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */
+ __u32 cpu; /* should always be 0 on m68k */
+ struct restart_block restart_block;
+-
+- __u8 supervisor_stack[0];
+ };
+
+ #define PREEMPT_ACTIVE 0x4000000
+@@ -28,91 +26,34 @@
+
+ /* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
+ #if PAGE_SHIFT == 13 /* 8k machines */
+-#define alloc_thread_info(tsk) ((struct thread_info *)__get_free_pages(GFP_KERNEL,0))
+-#define free_thread_info(ti) free_pages((unsigned long)(ti),0)
++#define alloc_thread_stack(tsk) ((void *)__get_free_pages(GFP_KERNEL,0))
++#define free_thread_stack(ti) free_pages((unsigned long)(ti),0)
+ #else /* otherwise assume 4k pages */
+-#define alloc_thread_info(tsk) ((struct thread_info *)__get_free_pages(GFP_KERNEL,1))
+-#define free_thread_info(ti) free_pages((unsigned long)(ti),1)
++#define alloc_thread_stack(tsk) ((void *)__get_free_pages(GFP_KERNEL,1))
++#define free_thread_stack(ti) free_pages((unsigned long)(ti),1)
+ #endif /* PAGE_SHIFT == 13 */
+
+ //#define init_thread_info (init_task.thread.info)
+ #define init_stack (init_thread_union.stack)
+
+-#define current_thread_info() (current->thread_info)
++#define task_thread_info(tsk) (&(tsk)->thread.info)
++#define current_thread_info() task_thread_info(current)
+
++#define setup_thread_stack(p, org) ({ \
++ *(struct task_struct **)(p)->stack = (p); \
++ task_thread_info(p)->task = (p); \
++})
+
+ #define __HAVE_THREAD_FUNCTIONS
+
+-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+-#define TIF_DELAYED_TRACE 1 /* single step a syscall */
+-#define TIF_NOTIFY_RESUME 2 /* resumption notification requested */
+-#define TIF_SIGPENDING 3 /* signal pending */
+-#define TIF_NEED_RESCHED 4 /* rescheduling necessary */
+-#define TIF_MEMDIE 5
+-
+-extern int thread_flag_fixme(void);
+-
+-/*
+- * flag set/clear/test wrappers
+- * - pass TIF_xxxx constants to these functions
++/* entry.S relies on these definitions!
++ * bits 0-7 are tested at every exception exit
++ * bits 8-15 are also tested at syscall exit
+ */
+-
+-#define __set_tsk_thread_flag(tsk, flag, val) ({ \
+- switch (flag) { \
+- case TIF_SIGPENDING: \
+- tsk->thread.work.sigpending = val; \
+- break; \
+- case TIF_NEED_RESCHED: \
+- tsk->thread.work.need_resched = val; \
+- break; \
+- case TIF_SYSCALL_TRACE: \
+- tsk->thread.work.syscall_trace = val; \
+- break; \
+- case TIF_MEMDIE: \
+- tsk->thread.work.memdie = val; \
+- break; \
+- default: \
+- thread_flag_fixme(); \
+- } \
+-})
+-
+-#define __get_tsk_thread_flag(tsk, flag) ({ \
+- int ___res; \
+- switch (flag) { \
+- case TIF_SIGPENDING: \
+- ___res = tsk->thread.work.sigpending; \
+- break; \
+- case TIF_NEED_RESCHED: \
+- ___res = tsk->thread.work.need_resched; \
+- break; \
+- case TIF_SYSCALL_TRACE: \
+- ___res = tsk->thread.work.syscall_trace;\
+- break; \
+- case TIF_MEMDIE: \
+- ___res = tsk->thread.work.memdie;\
+- break; \
+- default: \
+- ___res = thread_flag_fixme(); \
+- } \
+- ___res; \
+-})
+-
+-#define __get_set_tsk_thread_flag(tsk, flag, val) ({ \
+- int __res = __get_tsk_thread_flag(tsk, flag); \
+- __set_tsk_thread_flag(tsk, flag, val); \
+- __res; \
+-})
+-
+-#define set_tsk_thread_flag(tsk, flag) __set_tsk_thread_flag(tsk, flag, ~0)
+-#define clear_tsk_thread_flag(tsk, flag) __set_tsk_thread_flag(tsk, flag, 0)
+-#define test_and_set_tsk_thread_flag(tsk, flag) __get_set_tsk_thread_flag(tsk, flag, ~0)
+-#define test_tsk_thread_flag(tsk, flag) __get_tsk_thread_flag(tsk, flag)
+-
+-#define set_thread_flag(flag) set_tsk_thread_flag(current, flag)
+-#define clear_thread_flag(flag) clear_tsk_thread_flag(current, flag)
+-#define test_thread_flag(flag) test_tsk_thread_flag(current, flag)
+-
+-#define set_need_resched() set_thread_flag(TIF_NEED_RESCHED)
+-#define clear_need_resched() clear_thread_flag(TIF_NEED_RESCHED)
++#define TIF_SIGPENDING 6 /* signal pending */
++#define TIF_NEED_RESCHED 7 /* rescheduling necessary */
++#define TIF_DELAYED_TRACE 14 /* single step a syscall */
++#define TIF_SYSCALL_TRACE 15 /* syscall trace active */
++#define TIF_MEMDIE 16
+
+ #endif /* _ASM_M68K_THREAD_INFO_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/adb.h linux-2.6.12/include/linux/adb.h
+--- linux-2.6.12-i386/include/linux/adb.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/adb.h 2003-03-25 20:25:16.000000000 +0100
+@@ -76,6 +76,7 @@
+ #define ADBREQ_REPLY 1 /* expect reply */
+ #define ADBREQ_SYNC 2 /* poll until done */
+ #define ADBREQ_NOSEND 4 /* build the request, but don't send it */
++#define ADBREQ_RAW 8 /* send raw packet (don't prepend ADB_PACKET) */
+
+ /* Messages sent thru the client_list notifier. You should NOT stop
+ the operation, at least not with this version */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/bootmem.h linux-2.6.12/include/linux/bootmem.h
+--- linux-2.6.12-i386/include/linux/bootmem.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/bootmem.h 2005-04-25 23:13:10.000000000 +0200
+@@ -45,11 +45,11 @@
+ #define alloc_bootmem(x) \
+ __alloc_bootmem((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+ #define alloc_bootmem_low(x) \
+- __alloc_bootmem((x), SMP_CACHE_BYTES, 0)
++ __alloc_bootmem((x), SMP_CACHE_BYTES, __pa(PAGE_OFFSET))
+ #define alloc_bootmem_pages(x) \
+ __alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+ #define alloc_bootmem_low_pages(x) \
+- __alloc_bootmem((x), PAGE_SIZE, 0)
++ __alloc_bootmem((x), PAGE_SIZE, __pa(PAGE_OFFSET))
+ #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+ extern unsigned long __init free_all_bootmem (void);
+
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/ide.h linux-2.6.12/include/linux/ide.h
+--- linux-2.6.12-i386/include/linux/ide.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/ide.h 2005-06-19 16:36:06.000000000 +0200
+@@ -592,7 +592,7 @@
+ * sense_key : Sense key of the last failed packet command
+ */
+ typedef union {
+- unsigned all :8;
++ u8 all;
+ struct {
+ #if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned ili :1;
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/init_task.h linux-2.6.12/include/linux/init_task.h
+--- linux-2.6.12-i386/include/linux/init_task.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/init_task.h 2005-06-19 16:36:06.000000000 +0200
+@@ -70,7 +70,7 @@
+ #define INIT_TASK(tsk) \
+ { \
+ .state = 0, \
+- .thread_info = &init_thread_info, \
++ .stack = &init_stack, \
+ .usage = ATOMIC_INIT(2), \
+ .flags = 0, \
+ .lock_depth = -1, \
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/interrupt.h linux-2.6.12/include/linux/interrupt.h
+--- linux-2.6.12-i386/include/linux/interrupt.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/interrupt.h 2005-05-30 16:33:46.000000000 +0200
+@@ -9,6 +9,7 @@
+ #include <linux/preempt.h>
+ #include <linux/cpumask.h>
+ #include <linux/hardirq.h>
++#include <linux/sched.h>
+ #include <asm/atomic.h>
+ #include <asm/ptrace.h>
+ #include <asm/system.h>
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/sched.h linux-2.6.12/include/linux/sched.h
+--- linux-2.6.12-i386/include/linux/sched.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/sched.h 2005-06-19 16:36:08.000000000 +0200
+@@ -573,7 +573,8 @@
+
+ struct task_struct {
+ volatile long state; /* -1 unrunnable, 0 runnable, >0 stopped */
+- struct thread_info *thread_info;
++ //struct thread_info *thread_info;
++ void *stack;
+ atomic_t usage;
+ unsigned long flags; /* per process flags, defined below */
+ unsigned long ptrace;
+@@ -1105,32 +1106,50 @@
+ spin_unlock(&p->alloc_lock);
+ }
+
++#ifndef __HAVE_THREAD_FUNCTIONS
++
++#define task_thread_info(task) ((struct thread_info *)(task)->stack)
++
++static inline void setup_thread_stack(struct task_struct *p, struct task_struct *org)
++{
++ *task_thread_info(p) = *task_thread_info(org);
++ task_thread_info(p)->task = p;
++}
++
++static inline unsigned long *end_of_stack(struct task_struct *p)
++{
++ return (unsigned long *)(task_thread_info(p)(p) + 1);
++}
++
++#endif
++
+ /* set thread flags in other task's structures
+ * - see asm/thread_info.h for TIF_xxxx flags available
+ */
++
+ static inline void set_tsk_thread_flag(struct task_struct *tsk, int flag)
+ {
+- set_ti_thread_flag(tsk->thread_info,flag);
++ set_ti_thread_flag(task_thread_info(tsk), flag);
+ }
+
+ static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag)
+ {
+- clear_ti_thread_flag(tsk->thread_info,flag);
++ clear_ti_thread_flag(task_thread_info(tsk), flag);
+ }
+
+ static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag)
+ {
+- return test_and_set_ti_thread_flag(tsk->thread_info,flag);
++ return test_and_set_ti_thread_flag(task_thread_info(tsk), flag);
+ }
+
+ static inline int test_and_clear_tsk_thread_flag(struct task_struct *tsk, int flag)
+ {
+- return test_and_clear_ti_thread_flag(tsk->thread_info,flag);
++ return test_and_clear_ti_thread_flag(task_thread_info(tsk), flag);
+ }
+
+ static inline int test_tsk_thread_flag(struct task_struct *tsk, int flag)
+ {
+- return test_ti_thread_flag(tsk->thread_info,flag);
++ return test_ti_thread_flag(task_thread_info(tsk), flag);
+ }
+
+ static inline void set_tsk_need_resched(struct task_struct *tsk)
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/smp_lock.h linux-2.6.12/include/linux/smp_lock.h
+--- linux-2.6.12-i386/include/linux/smp_lock.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/smp_lock.h 2005-04-25 23:13:18.000000000 +0200
+@@ -2,7 +2,6 @@
+ #define __LINUX_SMPLOCK_H
+
+ #include <linux/config.h>
+-#include <linux/sched.h>
+ #include <linux/spinlock.h>
+
+ #ifdef CONFIG_LOCK_KERNEL
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/include/linux/thread_info.h linux-2.6.12/include/linux/thread_info.h
+--- linux-2.6.12-i386/include/linux/thread_info.h 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/include/linux/thread_info.h 2005-05-30 16:33:47.000000000 +0200
+@@ -27,31 +27,6 @@
+ * - pass TIF_xxxx constants to these functions
+ */
+
+-static inline void set_thread_flag(int flag)
+-{
+- set_bit(flag,¤t_thread_info()->flags);
+-}
+-
+-static inline void clear_thread_flag(int flag)
+-{
+- clear_bit(flag,¤t_thread_info()->flags);
+-}
+-
+-static inline int test_and_set_thread_flag(int flag)
+-{
+- return test_and_set_bit(flag,¤t_thread_info()->flags);
+-}
+-
+-static inline int test_and_clear_thread_flag(int flag)
+-{
+- return test_and_clear_bit(flag,¤t_thread_info()->flags);
+-}
+-
+-static inline int test_thread_flag(int flag)
+-{
+- return test_bit(flag,¤t_thread_info()->flags);
+-}
+-
+ static inline void set_ti_thread_flag(struct thread_info *ti, int flag)
+ {
+ set_bit(flag,&ti->flags);
+@@ -77,16 +52,20 @@
+ return test_bit(flag,&ti->flags);
+ }
+
+-static inline void set_need_resched(void)
+-{
+- set_thread_flag(TIF_NEED_RESCHED);
+-}
++#define set_thread_flag(flag) \
++ set_ti_thread_flag(current_thread_info(), flag)
++#define clear_thread_flag(flag) \
++ clear_ti_thread_flag(current_thread_info(), flag)
++#define test_and_set_thread_flag(flag) \
++ test_and_set_ti_thread_flag(current_thread_info(), flag)
++#define test_and_clear_thread_flag(flag) \
++ test_and_clear_ti_thread_flag(current_thread_info(), flag)
++#define test_thread_flag(flag) \
++ test_ti_thread_flag(current_thread_info(), flag)
+
+-static inline void clear_need_resched(void)
+-{
+- clear_thread_flag(TIF_NEED_RESCHED);
+-}
++#define set_need_resched() set_thread_flag(TIF_NEED_RESCHED)
++#define clear_need_resched() clear_thread_flag(TIF_NEED_RESCHED)
+
+-#endif
++#endif /* __KERNEL__ */
+
+ #endif /* _LINUX_THREAD_INFO_H */
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/kernel/exit.c linux-2.6.12/kernel/exit.c
+--- linux-2.6.12-i386/kernel/exit.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/kernel/exit.c 2005-06-19 16:36:18.000000000 +0200
+@@ -826,7 +826,7 @@
+ if (group_dead && tsk->signal->leader)
+ disassociate_ctty(1);
+
+- module_put(tsk->thread_info->exec_domain->module);
++ module_put(task_thread_info(tsk)->exec_domain->module);
+ if (tsk->binfmt)
+ module_put(tsk->binfmt->module);
+
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/kernel/fork.c linux-2.6.12/kernel/fork.c
+--- linux-2.6.12-i386/kernel/fork.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/kernel/fork.c 2005-06-19 16:36:18.000000000 +0200
+@@ -100,7 +100,7 @@
+
+ void free_task(struct task_struct *tsk)
+ {
+- free_thread_info(tsk->thread_info);
++ free_thread_stack(tsk->stack);
+ free_task_struct(tsk);
+ }
+ EXPORT_SYMBOL(free_task);
+@@ -155,7 +155,7 @@
+ static struct task_struct *dup_task_struct(struct task_struct *orig)
+ {
+ struct task_struct *tsk;
+- struct thread_info *ti;
++ void *stack;
+
+ prepare_to_copy(orig);
+
+@@ -163,16 +163,16 @@
+ if (!tsk)
+ return NULL;
+
+- ti = alloc_thread_info(tsk);
+- if (!ti) {
++ stack = alloc_thread_stack(tsk);
++ if (!stack) {
+ free_task_struct(tsk);
+ return NULL;
+ }
+
+- *ti = *orig->thread_info;
+ *tsk = *orig;
+- tsk->thread_info = ti;
+- ti->task = tsk;
++ tsk->stack = stack;
++ *(struct task_struct **)tsk->stack = tsk;
++ setup_thread_stack(tsk, orig);
+
+ /* One for us, one for whoever does the "release_task()" (usually parent) */
+ atomic_set(&tsk->usage,2);
+@@ -893,7 +893,7 @@
+ if (nr_threads >= max_threads)
+ goto bad_fork_cleanup_count;
+
+- if (!try_module_get(p->thread_info->exec_domain->module))
++ if (!try_module_get(task_thread_info(p)->exec_domain->module))
+ goto bad_fork_cleanup_count;
+
+ if (p->binfmt && !try_module_get(p->binfmt->module))
+@@ -1138,7 +1138,7 @@
+ if (p->binfmt)
+ module_put(p->binfmt->module);
+ bad_fork_cleanup_put_domain:
+- module_put(p->thread_info->exec_domain->module);
++ module_put(task_thread_info(p)->exec_domain->module);
+ bad_fork_cleanup_count:
+ put_group_info(p->group_info);
+ atomic_dec(&p->user->processes);
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/kernel/sched.c linux-2.6.12/kernel/sched.c
+--- linux-2.6.12-i386/kernel/sched.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/kernel/sched.c 2005-06-19 16:36:19.000000000 +0200
+@@ -3962,10 +3962,10 @@
+ #endif
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+ {
+- unsigned long * n = (unsigned long *) (p->thread_info+1);
++ unsigned long * n = end_of_stack(p);
+ while (!*n)
+ n++;
+- free = (unsigned long) n - (unsigned long)(p->thread_info+1);
++ free = (unsigned long) n - (unsigned long) end_of_stack(p);
+ }
+ #endif
+ printk("%5lu %5d %6d ", free, p->pid, p->parent->pid);
+@@ -4035,9 +4035,9 @@
+
+ /* Set the preempt count _outside_ the spinlocks! */
+ #if defined(CONFIG_PREEMPT) && !defined(CONFIG_PREEMPT_BKL)
+- idle->thread_info->preempt_count = (idle->lock_depth >= 0);
++ task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0);
+ #else
+- idle->thread_info->preempt_count = 0;
++ task_thread_info(idle)->preempt_count = 0;
+ #endif
+ }
+
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/mm/bootmem.c linux-2.6.12/mm/bootmem.c
+--- linux-2.6.12-i386/mm/bootmem.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/mm/bootmem.c 2005-04-25 23:13:33.000000000 +0200
+@@ -266,7 +266,6 @@
+
+ count = 0;
+ /* first extant page of the node */
+- page = virt_to_page(phys_to_virt(bdata->node_boot_start));
+ idx = bdata->node_low_pfn - (bdata->node_boot_start >> PAGE_SHIFT);
+ map = bdata->node_bootmem_map;
+ /* Check physaddr is O(LOG2(BITS_PER_LONG)) page aligned */
+@@ -278,6 +277,8 @@
+ if (gofast && v == ~0UL) {
+ int j, order;
+
++ page = virt_to_page(phys_to_virt((i << PAGE_SHIFT) +
++ bdata->node_boot_start));
+ count += BITS_PER_LONG;
+ __ClearPageReserved(page);
+ order = ffs(BITS_PER_LONG) - 1;
+@@ -289,21 +290,20 @@
+ }
+ __free_pages(page, order);
+ i += BITS_PER_LONG;
+- page += BITS_PER_LONG;
+ } else if (v) {
+ unsigned long m;
+- for (m = 1; m && i < idx; m<<=1, page++, i++) {
++ for (m = 1; m && i < idx; m<<=1, i++) {
+ if (v & m) {
++ page = virt_to_page(phys_to_virt((i << PAGE_SHIFT) +
++ bdata->node_boot_start));
+ count++;
+ __ClearPageReserved(page);
+ set_page_refs(page, 0);
+ __free_page(page);
+ }
+ }
+- } else {
++ } else
+ i+=BITS_PER_LONG;
+- page += BITS_PER_LONG;
+- }
+ }
+ total += count;
+
+diff -urN --exclude-from=/usr/src/exclude-file linux-2.6.12-i386/sound/oss/dmasound/dmasound_paula.c linux-2.6.12/sound/oss/dmasound/dmasound_paula.c
+--- linux-2.6.12-i386/sound/oss/dmasound/dmasound_paula.c 2005-06-17 21:48:29.000000000 +0200
++++ linux-2.6.12/sound/oss/dmasound/dmasound_paula.c 2005-05-30 16:34:14.000000000 +0200
+@@ -244,6 +244,7 @@
+ u_char frame[], ssize_t *frameUsed, \
+ ssize_t frameLeft) \
+ { \
++ const u_short *ptr = (const u_short *)userPtr; \
+ ssize_t count, used; \
+ u_short data; \
+ \
+@@ -253,7 +254,7 @@
+ count = min_t(size_t, userCount, frameLeft)>>1 & ~1; \
+ used = count*2; \
+ while (count > 0) { \
+- if (get_user(data, ((u_short *)userPtr)++)) \
++ if (get_user(data, ptr++)) \
+ return -EFAULT; \
+ data = convsample(data); \
+ *high++ = data>>8; \
+@@ -268,12 +269,12 @@
+ count = min_t(size_t, userCount, frameLeft)>>2 & ~1; \
+ used = count*4; \
+ while (count > 0) { \
+- if (get_user(data, ((u_short *)userPtr)++)) \
++ if (get_user(data, ptr++)) \
+ return -EFAULT; \
+ data = convsample(data); \
+ *lefth++ = data>>8; \
+ *leftl++ = (data>>2) & 0x3f; \
+- if (get_user(data, ((u_short *)userPtr)++)) \
++ if (get_user(data, ptr++)) \
+ return -EFAULT; \
+ data = convsample(data); \
+ *righth++ = data>>8; \
More information about the Kernel-svn-changes
mailing list