r3243 - branches/kernel-image-2.6.11/debian
Jurij Smakov
jurij-guest@costa.debian.org
Fri, 27 May 2005 04:55:13 +0000
Author: jurij-guest
Date: 2005-05-27 04:55:13 +0000 (Fri, 27 May 2005)
New Revision: 3243
Removed:
branches/kernel-image-2.6.11/debian/Makefile.image
Log:
Minor housekeeping.
Deleted: branches/kernel-image-2.6.11/debian/Makefile.image
===================================================================
--- branches/kernel-image-2.6.11/debian/Makefile.image 2005-05-27 04:52:42 UTC (rev 3242)
+++ branches/kernel-image-2.6.11/debian/Makefile.image 2005-05-27 04:55:13 UTC (rev 3243)
@@ -1,225 +0,0 @@
-#
-# This Makefile executes the unpack/build/binary targets for a single
-# subarch, which is passed in the subarch variable. Empty subarch
-# variable means that we are building for an arch without the subarch.
-# Additionally, variables version, abiname and ktver are
-# expected to be available (need to be exported from the parent process).
-# It is possible to override the flavours by setting the flavours
-# variable.
-#
-# This Makefile is run from the debian subdir
-#
-SHELL := sh -e
-debver := $(version)-$(abiname)
-uver := $(subst .,_,$(version))
-debnum := -$(abiname)
-kbpkg := kernel-kbuild-$(version)-$(abiname)
-# This will eventually have to be changed to a command, applying
-# the debian's patches from the local tree (arch/patches?)
-kpatch := /usr/src/kernel-patches/all/$(version)/apply/debian $(version)-$(ktver)
-DEBIAN_UPSTREAM_VERSION := $(version)
-ifeq (,$(DEB_HOST_ARCH))
- DEB_HOST_ARCH := $(shell dpkg-architecture -qDEB_HOST_ARCH)
- DEB_BUILD_ARCH := $(shell dpkg-architecture -qDEB_BUILD_ARCH)
-endif
-export version debnum DEBIAN_UPSTREAM_VERSION
-
-karch := $(DEB_HOST_ARCH)
-#
-# Build the list of common config files to be included
-#
-ifeq ($(subarch),none)
- basedir := arch/$(karch)
- append :=
-else
- basedir := arch/$(karch)/$(subarch)
- append := -$(subarch)
-endif
-default := $(basedir)/config.default
-configs := $(notdir $(wildcard $(basedir)/config.*))
-configs := $(filter-out config.common config.default, $(configs))
-tkdir := kernel-source-$(version)
-kdir := kernel-source-$(version)-$(subarch)
-ifndef flavours
- flavours := $(patsubst config.%,%,$(configs))
-endif
-
--include $(basedir)/Makefile.inc
-
-#
-# Here we construct the command lines for different make-kpkg
-# calls (build, kernel-image, kernel-headers) based on the values
-# of variables defined so far and provided by the arch/subarch
-# in Makefile.inc. @flavour@ in the expressions is going to be
-# replaced by the flavour for which the command is run.
-#
-kpkg_headers_cmd := HEADER_CLEAN_HOOK='$(CURDIR)/header-install-$(subarch)'
-kpkg_headers_cmd += make-kpkg --append-to-version $(debnum)$(append)
-kpkg_build_cmd := make-kpkg --append-to-version $(debnum)-@flavour@
-ifdef added_patches
- kpkg_headers_cmd += --added_patches $(subst @uver@,$(uver),$(added_patches))
- kpkg_build_cmd += --added_patches $(subst @uver@,$(uver),$(added_patches))
-endif
-ifdef build_subarch
- kpkg_build_cmd += --subarch $(build_subarch)
-endif
-ifdef headers_subarch
- kpkg_headers_cmd += --subarch $(headers_subarch)
-endif
-ifdef build_makeflags
- kpkg_build_cmd := MAKEFLAGS=$(build_makeflags) $(kpkg_build_cmd)
-endif
-#
-# Note that next variable (kpkg_image_pre) is not going to be evaluated
-# immediately. When referenced, the variable $* will have the current
-# flavour for which the command is executed. So if this flavour will
-# happen to be in the image_prefix_flavours list, the call to make-kpkg
-# will be prepended with contents if image_prefix.
-#
-kpkg_image_pre = $(if $(filter $*,$(image_prefix_flavours)),$(image_prefix))
-kpkg_image_cmd := $(kpkg_build_cmd) --initrd kernel_image
-kpkg_build_cmd += build
-kpkg_headers_cmd += kernel-headers
-ifndef headers_dirs
- headers_dirs = $(karch)
-endif
-ifneq (no,$(include_common_config))
- ccommon := arch/config.common
-endif
-ccommon += arch/$(karch)/config.common arch/$(karch)/$(subarch)/config.common
-#
-# Here we build lists of directories and stamps which we will depend on.
-# For each class of such targets there is a pattern rule which will catch
-# it and do the right thing.
-#
-bdirs := $(addprefix build-$(subarch)-, $(flavours))
-bstamps := $(addprefix build-stamp-$(subarch)-, $(flavours))
-istamps := $(addprefix install-stamp-$(subarch)-, $(flavours))
-#
-# Targets
-#
-unpack: unpack-stamp-$(subarch)
-unpack-stamp-$(subarch): $(configs) header-install-$(subarch) $(bdirs)
- touch unpack-stamp-$(subarch)
-
-build: build-stamp-$(subarch)
-build-stamp-$(subarch): unpack-stamp-$(subarch) $(bstamps)
- touch build-stamp-$(subarch)
-
-binary-indep: build
-binary-arch: build headers-stamp $(istamps)
- mv *.deb ../..
-
-install-stamp-$(subarch)-%: build-$(subarch)-% build-stamp-$(subarch)-%
- cp -al $< install-$*;
- cd install-$*; \
- $(strip $(kpkg_image_pre) $(subst @flavour@,$*,$(kpkg_image_cmd)))
- cat install-$*/debian/files >> files;
- rm -rf install-$*;
- touch install-stamp-$(subarch)-$*
-
-headers-stamp: $(kdir)
- dh_testdir
- dh_clean -k
- dh_installdirs
- cp $(default) $(kdir)/.config
- cd $(kdir); $(kpkg_headers_cmd)
- cat $(kdir)/debian/files >> files
- touch headers-stamp
-
-binary: binary-indep binary-arch
-
-header-install-$(subarch): templates/header-install.in
- sed -e 's,@kbpkg@,$(kbpkg),g' \
- -e 's,@ksource_dir@,$(CURDIR)/$(kdir),g' \
- -e 's,@headers_dirs@,$(headers_dirs),g' \
- -e 's,@headers_extra@,$(headers_extra),g' \
- templates/header-install.in > header-install-$(subarch)
- chmod u+x header-install-$(subarch)
-#
-# The way to make the correct package names is to make a
-# subarch-specific post-install script...
-#
-post-install-$(subarch): templates/post-install.in
- sed -e 's,@initrd_modules@,$(initrd_modules),' \
- -e 's,@append_subarch@,$(append),' \
- templates/post-install.in > post-install-$(subarch)
-#
-# Generates the kernel config file for a subarch by merging
-# the arch-independent config file (arch/config.common),
-# arch-specific config file (arch/$(karch)/config.common),
-# and subarch specific one (arch/$(karch)/config.subarch).
-# It is possible to avoid the inclusion of the arch-indep
-# config file by setting include_common_config = no in the
-# arch/$(karch)/Makefile.inc.
-#
-config.%:
- @echo "configs=$(configs)"
- @echo "Generating configuration file $@:"
- rm -f $@
- for i in $(ccommon); do \
- if [ -f $${i} ]; then \
- cat $${i} >> $@; \
- fi; \
- done
-# Flavour config file must be present
- cat $(basedir)/$@ >> $@
-
-$(kdir): post-install-$(subarch)
- dh_testdir
- tar jxf /usr/src/$(tkdir).tar.bz2
- mkdir -p $(tkdir)/debian
- cp debian/changelog $(tkdir)/debian
- cp debian/control $(tkdir)/debian
- cp debian/copyright $(tkdir)/debian
- touch $(tkdir)/debian/official
- install post-install-$(subarch) $(tkdir)/debian/post-install
- cd $(tkdir) && $(kpatch)
-# Arch/subarch-specific patches
- if [ -d $(basedir)/patches ] && \
- [ -s $(basedir)/patches/list ]; then \
- cd $(tkdir); \
- for i in $$(cat ../$(basedir)/patches/list); do \
- patch -p1 < ../$(basedir)/patches/$${i}; \
- done; \
- fi
- mv $(tkdir) $@
-#
-# This target performs a build for a particular flavour. Note
-# that in this file it should be always placed *before* the
-# build-$(subarch)-% target, which creates the build directory.
-#
-# Some arches have extra arch/${ARCH}/kernel/asm-offsets.s files
-# which have to be included in kernel-headers. The problem is that
-# they are only generated during build and we never performed a
-# full build in the directory $(kdir) where kernel-headers are
-# built. So, after build we check whether current build arch has
-# such a file and symlink it into the $(kdir) if necessary.
-# Note that to get into the kernel-headers package the arch/subarch
-# still needs variables headers_dirs and headers_extra set.
-#
-build-stamp-$(subarch)-%: build-$(subarch)-%
- dh_testdir
- PATH=$$PWD/bin:$$PATH; \
- cd $<; \
- $(subst @flavour@,$*,$(kpkg_build_cmd)); \
- $(if $(image_postproc),$(image_postproc),true); \
- arch=$$(basename $$(readlink include/asm)); \
- arch="$${arch#asm-}"; \
- src="arch/$${arch}/kernel/asm-offsets.s"; \
- dst="../$(kdir)/$${src}"; \
- if [ -f "$${src}" ] && [ ! -e "$${dst}" ]; then \
- ln -s "$$(pwd)/$${src}" "$${dst}"; \
- fi
- touch build-stamp-$(subarch)-$*
-#
-# Creates a build directory for a particular flavour
-#
-build-$(subarch)-%: $(kdir) config.%
- dh_testdir
- if [ ! -d $@ ]; then \
- cp -al $(kdir) $@; \
- cp config.$* $@/.config; \
- fi
-
-.PHONY: build unpack binary-indep binary-arch binary