[kernel] r11106 - in dists/trunk/linux-2.6/debian: . patches/features/arm patches/series

Martin Michlmayr tbm at alioth.debian.org
Sun Apr 20 12:48:53 UTC 2008


Author: tbm
Date: Sun Apr 20 12:48:51 2008
New Revision: 11106

Log:
Add support for QNAP TS-409 (Sylver Bruneau).


Added:
   dists/trunk/linux-2.6/debian/patches/features/arm/orion-mv88f5281-d0.patch
   dists/trunk/linux-2.6/debian/patches/features/arm/ts409.patch
Modified:
   dists/trunk/linux-2.6/debian/changelog
   dists/trunk/linux-2.6/debian/patches/series/1~experimental.1

Modified: dists/trunk/linux-2.6/debian/changelog
==============================================================================
--- dists/trunk/linux-2.6/debian/changelog	(original)
+++ dists/trunk/linux-2.6/debian/changelog	Sun Apr 20 12:48:51 2008
@@ -57,6 +57,7 @@
   * [arm/armel] Add patch to set the MAC address on QNAP TS-109/TS-209.
   * [arm] Add support for Buffalo Linkstation Pro/Live (Byron Bradley).
   * [arm/orion] Fix hang when Write Allocate is enabled (Lennert Buytenhek).
+  * [arm/orion] Add support for QNAP TS-409 (Sylver Bruneau).
 
   [ Daniel Baumann ]
   * Added patch from unionfs upstream to export release_open_intent symbol.

Added: dists/trunk/linux-2.6/debian/patches/features/arm/orion-mv88f5281-d0.patch
==============================================================================
--- (empty file)
+++ dists/trunk/linux-2.6/debian/patches/features/arm/orion-mv88f5281-d0.patch	Sun Apr 20 12:48:51 2008
@@ -0,0 +1,21 @@
+--- a/arch/arm/mach-orion/common.c
++++ b/arch/arm/mach-orion/common.c
+@@ -301,6 +301,8 @@ static void orion_id(u32 *dev, u32 *rev, char **dev_name)
+ 			*dev_name = "MV88F5281-D2";
+ 		} else if (*rev == MV88F5281_REV_D1) {
+ 			*dev_name = "MV88F5281-D1";
++		} else if (*rev == MV88F5281_REV_D0) {
++			*dev_name = "MV88F5281-D0";
+ 		} else {
+ 			*dev_name = "MV88F5281-Rev-Unsupported";
+ 		}
+--- a/include/asm-arm/arch-orion/orion.h
++++ b/include/asm-arm/arch-orion/orion.h
+@@ -59,6 +59,7 @@
+ #define MV88F5182_REV_A2	2
+ /* Orion-2 (88F5281) */
+ #define MV88F5281_DEV_ID	0x5281
++#define MV88F5281_REV_D0	4
+ #define MV88F5281_REV_D1	5
+ #define MV88F5281_REV_D2	6
+ 

Added: dists/trunk/linux-2.6/debian/patches/features/arm/ts409.patch
==============================================================================
--- (empty file)
+++ dists/trunk/linux-2.6/debian/patches/features/arm/ts409.patch	Sun Apr 20 12:48:51 2008
@@ -0,0 +1,426 @@
+--- a/arch/arm/mach-orion/Kconfig
++++ b/arch/arm/mach-orion/Kconfig
+@@ -36,6 +36,12 @@ config MACH_TS209
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  QNAP TS-109/TS-209 platform.
+ 
++config MACH_TS409
++	bool "QNAP TS-409"
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  QNAP TS-409 platform.
++
+ endmenu
+ 
+ endif
+diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile
+index f91d937..07e8886 100644
+--- a/arch/arm/mach-orion/Makefile
++++ b/arch/arm/mach-orion/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
+ obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
+ obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
+ obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o
++obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o
+--- /dev/null	2007-09-25 12:43:17.000000000 +0000
++++ b/arch/arm/mach-orion/ts409-setup.c	2008-04-20 12:10:02.000000000 +0000
+@@ -0,0 +1,399 @@
++/*
++ * QNAP TS-409 Board Setup
++ *
++ * Maintainer: Sylver Bruneau <sylver.bruneau at gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/pci.h>
++#include <linux/irq.h>
++#include <linux/mtd/physmap.h>
++#include <linux/mtd/nand.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/i2c.h>
++#include <linux/serial_reg.h>
++#include <linux/ata_platform.h>
++#include <asm/mach-types.h>
++#include <asm/gpio.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/pci.h>
++#include <asm/arch/orion.h>
++#include <asm/arch/platform.h>
++#include "common.h"
++
++#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
++/*#define QNAP_TS409_NOR_BOOT_BASE 0xf4000000*/
++#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
++
++/****************************************************************************
++ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
++ *     partitions on the device because we want to keep compatability with
++ *     existing QNAP firmware.
++ *
++ * Layout as used by QNAP:
++ *  [2] 0x00000000-0x00200000 : "Kernel"
++ *  [3] 0x00200000-0x00600000 : "RootFS1"
++ *  [4] 0x00600000-0x00700000 : "RootFS2"
++ *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
++ *  [5] 0x00760000-0x00780000 : "U-Boot Config"
++ *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
++ ***************************************************************************/
++static struct mtd_partition qnap_ts409_partitions[] = {
++	{
++		.name       = "U-Boot",
++		.size       = 0x00080000,
++		.offset     = 0x00780000,
++		.mask_flags = MTD_WRITEABLE,
++	}, {
++		.name   = "Kernel",
++		.size   = 0x00200000,
++		.offset = 0,
++	}, {
++		.name   = "RootFS1",
++		.size   = 0x00400000,
++		.offset = 0x00200000,
++	}, {
++		.name   = "RootFS2",
++		.size   = 0x00100000,
++		.offset = 0x00600000,
++	}, {
++		.name   = "U-Boot Config",
++		.size   = 0x00020000,
++		.offset = 0x00760000,
++	}, {
++		.name       = "NAS Config",
++		.size       = 0x00060000,
++		.offset     = 0x00700000,
++		.mask_flags = MTD_WRITEABLE,
++	}
++};
++
++static struct physmap_flash_data qnap_ts409_nor_flash_data = {
++	.width    = 1,
++	.parts    = qnap_ts409_partitions,
++	.nr_parts = ARRAY_SIZE(qnap_ts409_partitions)
++};
++
++static struct resource qnap_ts409_nor_flash_resource = {
++	.flags = IORESOURCE_MEM,
++	.start = QNAP_TS409_NOR_BOOT_BASE,
++	.end   = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
++};
++
++static struct platform_device qnap_ts409_nor_flash = {
++	.name          = "physmap-flash",
++	.id            = 0,
++	.dev           = { .platform_data = &qnap_ts409_nor_flash_data, },
++	.resource      = &qnap_ts409_nor_flash_resource,
++	.num_resources = 1,
++};
++
++/*****************************************************************************
++ * PCI
++ ****************************************************************************/
++#define QNAP_TS409_PCI_SLOT0_OFFS		7
++#define QNAP_TS409_PCI_SLOT0_IRQ_PIN		12
++#define QNAP_TS409_PCI_SLOT1_SLOT2_IRQ_PIN	13
++
++void __init qnap_ts409_pci_preinit(void)
++{
++	int pin;
++
++	/*
++	 * Configure PCI GPIO IRQ pins
++	 */
++	pin = QNAP_TS409_PCI_SLOT0_IRQ_PIN;
++	if (gpio_request(pin, "PCI Int1") == 0) {
++		if (gpio_direction_input(pin) == 0) {
++			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
++		} else {
++			printk(KERN_ERR "qnap_ts409_pci_preinit failed to "
++					"set_irq_type pin %d\n", pin);
++			gpio_free(pin);
++		}
++	} else {
++		printk(KERN_ERR "qnap_ts409_pci_preinit failed to gpio_request "
++				"%d\n", pin);
++	}
++
++	pin = QNAP_TS409_PCI_SLOT1_SLOT2_IRQ_PIN;
++	if (gpio_request(pin, "PCI Int2") == 0) {
++		if (gpio_direction_input(pin) == 0) {
++			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
++		} else {
++			printk(KERN_ERR "qnap_ts409_pci_preinit failed "
++					"to set_irq_type pin %d\n", pin);
++			gpio_free(pin);
++		}
++	} else {
++		printk(KERN_ERR "qnap_ts409_pci_preinit failed to gpio_request "
++				"%d\n", pin);
++	}
++}
++
++static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	/*
++	 * PCIE IRQ is connected internally (not GPIO)
++	 */
++	if (dev->bus->number == orion_pcie_local_bus_nr())
++		return IRQ_ORION_PCIE0_INT;
++
++	/*
++	 * PCI IRQs are connected via GPIOs
++	 */
++	switch (slot - QNAP_TS409_PCI_SLOT0_OFFS) {
++	case 0:
++		return gpio_to_irq(QNAP_TS409_PCI_SLOT0_IRQ_PIN);
++	case 1:
++	case 2:
++		return gpio_to_irq(QNAP_TS409_PCI_SLOT1_SLOT2_IRQ_PIN);
++	default:
++		return -1;
++	}
++}
++
++static struct hw_pci qnap_ts409_pci __initdata = {
++	.nr_controllers = 2,
++	.preinit        = qnap_ts409_pci_preinit,
++	.swizzle        = pci_std_swizzle,
++	.setup          = orion_pci_sys_setup,
++	.scan           = orion_pci_sys_scan_bus,
++	.map_irq        = qnap_ts409_pci_map_irq,
++};
++
++static int __init qnap_ts409_pci_init(void)
++{
++	if (machine_is_ts409())
++		pci_common_init(&qnap_ts409_pci);
++
++	return 0;
++}
++
++subsys_initcall(qnap_ts409_pci_init);
++
++/*****************************************************************************
++ * Ethernet
++ ****************************************************************************/
++
++static struct mv643xx_eth_platform_data qnap_ts409_eth_data = {
++	.phy_addr       = 8,
++	.force_phy_addr = 1,
++};
++
++static int __init parse_hex_nibble(char n)
++{
++	if (n >= '0' && n <= '9')
++		return n - '0';
++
++	if (n >= 'A' && n <= 'F')
++		return n - 'A' + 10;
++
++	if (n >= 'a' && n <= 'f')
++		return n - 'a' + 10;
++
++	return -1;
++}
++
++static int __init parse_hex_byte(const char *b)
++{
++	int hi;
++	int lo;
++
++	hi = parse_hex_nibble(b[0]);
++	lo = parse_hex_nibble(b[1]);
++
++	if (hi < 0 || lo < 0)
++		return -1;
++
++	return (hi << 4) | lo;
++}
++
++static int __init check_mac_addr(const char *addr_str)
++{
++	u_int8_t addr[6];
++	int i;
++
++	for (i = 0; i < 6; i++) {
++		int byte;
++
++		/*
++		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
++		 */
++		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
++			return -1;
++
++		byte = parse_hex_byte(addr_str + (i * 3));
++		if (byte < 0)
++			return -1;
++		addr[i] = byte;
++	}
++
++	printk(KERN_INFO "ts409: found ethernet mac address ");
++	for (i = 0; i < 6; i++)
++		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
++
++	memcpy(qnap_ts409_eth_data.mac_addr, addr, 6);
++
++	return 0;
++}
++
++/*
++ * The 'NAS Config' flash partition has an ext2 filesystem which
++ * contains a file that has the ethernet MAC address in plain text
++ * (format "xx:xx:xx:xx:xx:xx\n".)
++ */
++static void __init ts409_find_mac_addr(void)
++{
++	unsigned long addr;
++
++	for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
++		char *nor_page;
++		int ret = 0;
++
++		nor_page = ioremap(QNAP_TS409_NOR_BOOT_BASE + addr, 1024);
++		if (nor_page != NULL) {
++			ret = check_mac_addr(nor_page);
++			iounmap(nor_page);
++		}
++
++		if (ret == 0)
++			break;
++	}
++}
++
++/*****************************************************************************
++ * RTC S35390A on I2C bus
++ ****************************************************************************/
++
++#define TS409_RTC_GPIO	10
++
++static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
++       .driver_name = "rtc-s35390a",
++       .addr        = 0x30,
++       .irq         = 0,
++};
++
++/*****************************************************************************
++ * General Setup
++ ****************************************************************************/
++
++static struct platform_device *qnap_ts409_devices[] __initdata = {
++	&qnap_ts409_nor_flash,
++};
++
++/*
++ * QNAP TS-409 specific power off method via UART1-attached PIC
++ */
++
++#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
++
++static void qnap_ts409_power_off(void)
++{
++	/* 19200 baud divisor */
++	const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200));
++
++	pr_info("%s: triggering power-off...\n", __func__);
++
++	/* hijack uart1 and reset into sane state (19200,8n1) */
++	orion_write(UART1_REG(LCR), 0x83);
++	orion_write(UART1_REG(DLL), divisor & 0xff);
++	orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
++	orion_write(UART1_REG(LCR), 0x03);
++	orion_write(UART1_REG(IER), 0x00);
++	orion_write(UART1_REG(FCR), 0x00);
++	orion_write(UART1_REG(MCR), 0x00);
++
++	/* send the power-off command 'A' to PIC */
++	orion_write(UART1_REG(TX), 'A');
++}
++
++static void __init qnap_ts409_init(void)
++{
++	/*
++	 * Setup basic Orion functions. Need to be called early.
++	 */
++	orion_init();
++
++	/*
++	 * Setup flash mapping
++	 */
++	orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS409_NOR_BOOT_BASE,
++			    QNAP_TS409_NOR_BOOT_SIZE, -1);
++
++	/*
++	 * Open a special address decode windows for the PCIE WA.
++	 */
++	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
++	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
++		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
++
++	/*
++	 * Setup Multiplexing Pins --
++	 * MPP[0] GPIO ???
++	 * MPP[1] GPIO ???
++	 * MPP[2] ???
++	 * MPP[3] ???
++	 * MPP[4] GPIO ???
++	 * MPP[5] GPIO ???
++	 * MPP[6] GPIO ???
++	 * MPP[7] GPIO ???
++	 * MPP[8] ???
++	 * MPP[9] ???
++	 * MPP[10] GPIO RTC int
++	 * MPP[11] GPIO ???
++	 * MPP[12] GPIO PCI int 1
++	 * MPP[13] GPIO PCI int 2
++	 * MPP[14] GPIO ???
++	 * MPP[15] GPIO ???
++	 * MPP[16] ???
++	 * MPP[17] ???
++	 * MPP[18] ???
++	 * MPP[19] ???
++	 */
++	orion_write(MPP_0_7_CTRL, 0x00002203);
++	orion_write(MPP_8_15_CTRL, 0x00000033);
++	orion_write(MPP_16_19_CTRL, 0x0);
++	orion_gpio_set_valid_pins(0xfffcf3);
++
++	/* register ts409 specific power-off method */
++	pm_power_off = qnap_ts409_power_off;
++
++	platform_add_devices(qnap_ts409_devices,
++				ARRAY_SIZE(qnap_ts409_devices));
++
++	/* Get RTC IRQ and register the chip */
++	if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
++		if (gpio_direction_input(TS409_RTC_GPIO) == 0)
++			qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
++		else
++			gpio_free(TS409_RTC_GPIO);
++	}
++	if (qnap_ts409_i2c_rtc.irq == 0)
++		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
++	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
++
++	ts409_find_mac_addr();
++	orion_eth_init(&qnap_ts409_eth_data);
++}
++
++MACHINE_START(TS409, "QNAP TS-409")
++	/* Maintainer:  Sylver Bruneau <sylver.bruneau at gmail.com> */
++	.phys_io	= ORION_REGS_PHYS_BASE,
++	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
++	.boot_params	= 0x00000100,
++	.init_machine	= qnap_ts409_init,
++	.map_io		= orion_map_io,
++	.init_irq	= orion_init_irq,
++	.timer		= &orion_timer,
++	.fixup		= tag_fixup_mem32,
++MACHINE_END

Modified: dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
==============================================================================
--- dists/trunk/linux-2.6/debian/patches/series/1~experimental.1	(original)
+++ dists/trunk/linux-2.6/debian/patches/series/1~experimental.1	Sun Apr 20 12:48:51 2008
@@ -21,6 +21,8 @@
 + features/arm/ixp4xx-net-drivers.patch
 + features/arm/linkstation.patch
 + bugfix/arm/ts209-set-mac.patch
++ features/arm/orion-mv88f5281-d0.patch
++ features/arm/ts409.patch
 + bugfix/sparc/drivers_net-broken.patch
 + bugfix/ia64/hardcode-arch-script-output.patch
 + bugfix/mips/disable-advansys.patch



More information about the Kernel-svn-changes mailing list