[kernel] r10621 - in dists/trunk/linux-2.6/debian/patches: features/all series
Maximilian Attems
maks at alioth.debian.org
Thu Feb 21 12:20:11 UTC 2008
Author: maks
Date: Thu Feb 21 12:20:06 2008
New Revision: 10621
Log:
restore latest at76 patch
not yet merged upstream, but low overhead aka no bug reports..
update to latest fedora version
Added:
dists/trunk/linux-2.6/debian/patches/features/all/at76.patch
Modified:
dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
Added: dists/trunk/linux-2.6/debian/patches/features/all/at76.patch
==============================================================================
--- (empty file)
+++ dists/trunk/linux-2.6/debian/patches/features/all/at76.patch Thu Feb 21 12:20:06 2008
@@ -0,0 +1,6941 @@
+commit 38ec6fbd236318179e28c71bc1b3dc94166e4be2
+Author: Pavel Roskin <proski at gnu.org>
+Date: Mon Feb 4 00:05:19 2008 -0500
+
+ at76_usb: Add ID for Uniden PCW100
+
+ Tested and reported by Lior Silberman.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 4ed58b00a2df9772cfa631f53af52c38207d78ac
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:41:25 2007 -0400
+
+ [PATCH] at76_usb: Add ID for at76c503a based CNETUSB611
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 3a39b0c26c19b4f26ab90f8cd170e68da3c8fb91
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:41:18 2007 -0400
+
+ [PATCH] at76_usb: Bump version to 0.17
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 69a965e9dde88c1dec49a0e840020bbdfc2263ad
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:41:12 2007 -0400
+
+ [PATCH] at76_usb: Use ETH_P_802_2 in monitor mode
+
+ It's used by most other wireless drivers, including mac80211.
+ ETH_P_80211_RAW is obsolete.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit e007ed4c5328f857201d66c8564978bd4150a9a5
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:41:06 2007 -0400
+
+ [PATCH] at76_usb: Be more verbose on startup
+
+ Promote some debug messages from at76_dbg() to unconditional KERN_DEBUG.
+ Use dev_printk() before the device is registered, as "wlan%d" doesn't
+ identify the device uniquely.
+
+ Print firmware name and version when it's loaded from file. Print
+ firmware version reported by the card. Print USB address and network
+ device name on the same line to help identifying the device.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 84d9a4914d2f678728b0b9a4c4b360e93b2e2efa
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:59 2007 -0400
+
+ [PATCH] at76_usb: Use dev_printk() where possible
+
+ dev_printk() prints the USB device name in addition to the driver name,
+ which makes it easier to understand the diagnostics in case of multiple
+ devices.
+
+ Use &interface->dev, as it's more specific and includes the driver name,
+ but use &udev->dev if interface is not available.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 46e958f2e0334bfeb1436d8066e1797804212178
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:53 2007 -0400
+
+ [PATCH] at76_usb: Remove incorrect firmware version check
+
+ The major version of the firmware reported by the device can mismatch
+ the version of the originally loaded firmware, as it is the case for
+ Belkin F5D6050.
+
+ Remove this check and assume the firmware to be working as long that the
+ external firmware download didn't fail and the firmware version could be
+ read at all.
+
+ Reported by Corey Pappas <pappascd at gmail.com>
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit cbf56decc3dd24be59bdcd7af14ae6b6fc1d7265
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:47 2007 -0400
+
+ [PATCH] at76_usb: Revert to network device names starting with "wlan"
+
+ The change to the default "eth" in 0.16 was unnecessary and broke some
+ setups. Reported by Mark Sansome <msansome at troodos.demon.co.uk>
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 73363e219953a6bcafa0087b415c0ce154a13940
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:40 2007 -0400
+
+ [PATCH] at76_usb: Add ID for Corega Wireless LAN USB-11 mini and mini2
+
+ Original patch by Weihua Yao <weihuayao at gmail.com>
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 65e5ad191757d5febb31e97a8a08dbd672d0662d
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:34 2007 -0400
+
+ [PATCH] at76_usb: Avoid dealing with milliseconds when possible, use jiffies
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 8f3811adf092d19f14111166af05f10cb2efa651
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:27 2007 -0400
+
+ [PATCH] at76_usb: Move some parts from at76_usb.h to at76_usb.c
+
+ Don't include anything from at76_usb.h. Keep DRIVER_NAME and
+ DRIVER_VERSION together. Define at76_dbg() after DRIVER_NAME.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 0048a3f2c0de2f6ba969731f51eaaa73b3e168e2
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:21 2007 -0400
+
+ [PATCH] at76_usb: Remove unneeded memset() calls
+
+ Use kzalloc for bss table entries. priv is already zeroized, no need to
+ do it again.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 20eab45fc567b85f8aaa131eceb8d53ac14d3fd6
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:15 2007 -0400
+
+ [PATCH] at76_usb: Clean reserved tx area for mgmt frames like it's done for data
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit b96c9fd4b3770d5b731ed3d207644b2ffec80313
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:08 2007 -0400
+
+ [PATCH] at76_usb: Make it clear that management frames are sent at 1Mbps
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 6abdf0d9679fb3cc0b2ed539e24cbba058f33043
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:40:02 2007 -0400
+
+ [PATCH] at76_usb: Eliminate variables used only in at76_dbg()
+
+ Make it possible to disable at76_dbg() at the compile time without
+ introducing any warnings.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 53c4d65cd1f4455b6d0c6ce605a6853e9108c6ae
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:55 2007 -0400
+
+ [PATCH] at76_usb: Use string precision to avoid line termination
+
+ In particular, don't extend ESSID to 33 bytes.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 2a000a0fb3a21674791023759e24e1bdc3c197ef
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:49 2007 -0400
+
+ [PATCH] at76_usb: Stop worrying about line termination in ethtool info
+
+ The driver's responsibility is not to overwrite the buffer and not to
+ leak kernel data. Line termination is the userspace responsibility.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 59268149e41b94bc2bd3554fcd12d238e01bdc07
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:42 2007 -0400
+
+ [PATCH] at76_usb: Rename tlv to ie for readability
+
+ "ie" is the standard abbreviation for "information element".
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 206f30d4d21565358128aa8ca210d518797ba285
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:36 2007 -0400
+
+ [PATCH] at76_usb: Remove commented out code for multicast support
+
+ If anyone cares to implement it, it should be started anew.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit afd74d244ce1d869e82758c650f49a867501762f
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:30 2007 -0400
+
+ [PATCH] at76_usb: Eliminate err(), it's USB specific
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 2235301c13ec2c6367ef129477be8967631a436f
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:23 2007 -0400
+
+ [PATCH] at76_usb: Integrate at76_set_monitor_mode() into at76_dwork_restart()
+
+ Reorder some statements in at76_dwork_restart()
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit a38e0e268f2219660c91a3813d11c1440cb75faf
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:17 2007 -0400
+
+ [PATCH] at76_usb: Fix turning radio off
+
+ The Atmel's driver uses command 7 to turn radio off. Also,
+ CMD_GETOPMODE is bogus, remove it.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 451c1cd7fcdad82175c80fb0e3e4a0568b41c17a
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:11 2007 -0400
+
+ [PATCH] at76_usb: No need to reserve 72 bytes in set_mib_buffer - we only need 6
+
+ Use union for data in set_mib_buffer to guarantee minimally needed
+ buffer length.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 447c17aaf1833217f82b97be42b333c72b966db2
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:39:04 2007 -0400
+
+ [PATCH] at76_usb: Don't clean priv->mib_buf, just clean data explicitly if needed
+
+ priv->mib_buf.reserved is 0 when priv is allocated, and stays 0. When
+ setting ibss_change, set data[0] to 0.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 951329488d45d11d25914b4da0ab93f94d72582d
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:38:58 2007 -0400
+
+ [PATCH] at76_usb: Avoid dubious use of '\0'
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit ae5f9aab3f18f4dcb9a83e490996990711c53cb4
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:38:51 2007 -0400
+
+ [PATCH] at76_usb: Fix some device names in the device table
+
+ Add vendor where it's missing. Use spelling preferred by the vendors.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 3086da15d597fb24b7254c4e638b380597e7f7c0
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sun Sep 30 14:38:45 2007 -0400
+
+ [PATCH] at76_usb: Use USB_DEVICE_DATA to improve readability of the device table
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit f6ea5e4633ef565282f4fdfd6efb4fce47ba63e6
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:34 2007 -0400
+
+ [PATCH] at76_usb: Replace scan_runs with scan_need_any
+
+ It's more meaningful than a number.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 27147842aa12fb6f3628c8b7bfe0d1e9e41ee6b8
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:29 2007 -0400
+
+ [PATCH] at76_usb: Don't do additional MIB dumps if DEBUG is defined
+
+ They are already printed from at76_startup_device(), which should be
+ enough.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 14a38765e92afa44f94b78911cb5f1d4bc717a29
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:23 2007 -0400
+
+ [PATCH] at76_usb: Remove international roaming support
+
+ It's broken beyond repair and legally dubious.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit b72a145cc8352a033cffd36e7edd3afc5ab8c692
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:17 2007 -0400
+
+ [PATCH] at76_usb: Massive cleanup of dump functions
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 21b01509a7a669f557fd0ef822058624bcaac6a4
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:11 2007 -0400
+
+ [PATCH] at76_usb: Simplify logic in at76_is_hidden_ssid()
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 798293c1bbfc815ed7acd6b5390226292bbad05c
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:06 2007 -0400
+
+ [PATCH] at76_usb: Eliminate pr_debug() in favor of at76_dbg()
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 99de835fbdf7d9987511a3ffef63685edeb256f8
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:37:00 2007 -0400
+
+ [PATCH] at76_usb: Eliminate at76_dbg_dumpbuf() in favor of hex2str()
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit dc15d751590deb46a8f1aee782bc4f66a811ba58
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:54 2007 -0400
+
+ [PATCH] at76_usb: Convert dbg() to at76_dbg() or remove it
+
+ Using two debug macros is inconsistent. Besides, dbg() only prints
+ something if DEBUG is defined.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit ec943e753321c78047b5e70d846deed79e3d7e0d
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:49 2007 -0400
+
+ [PATCH] at76_usb: Remove unneeded braces, found by checkpatch.pl
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 474a3bd835a1d6ce0567b6f0ce71ce17520edf85
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:43 2007 -0400
+
+ [PATCH] at76_usb: Improve dump of MAC_ADDR
+
+ Don't require DEBUG to be defined. Dump each group address separately,
+ next to the status. Rename MIB_MAC_ADD to MIB_MAC_ADDR.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit e5d3864054c7bae4bde6681148db5fe293d3972f
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:37 2007 -0400
+
+ [PATCH] at76_usb: Don't dump mib_mdomain while scanning, it's done on device startup
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 020e78ae379a4153b7c87aaeffca9d6694f0badb
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:31 2007 -0400
+
+ [PATCH] at76_usb: Do implicit scanning only with current ESSID
+
+ This should speed up association. We don't need non-matching APs if
+ ESSID is set.
+
+ For user-requested scanning, scan for any essid after that. For
+ international scanning, start with scan_runs 1, as it was meant to be
+ done. Actually use ir_step 0 for international scanning. Adjust debug
+ messages correspondingly.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 83d03b994903ffe7f6ab0b540780852412387030
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:26 2007 -0400
+
+ [PATCH] at76_usb: Simplify at76_get_mib_mdomain()
+
+ The "error" label is not needed.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 2510182b5f69324e37869cfee1d9b78c5a1c8cfe
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:20 2007 -0400
+
+ [PATCH] at76_usb: Only retry resubmitting rx_urb once
+
+ Other drivers don't even bother resubmitting it with GFP_KERNEL. If it
+ fails with GFP_KERNEL, we have a problem, and restarting the task is not
+ likely to be helpful.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit eb542472fb6621bed0d9a176e62ec261e162b3ac
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:14 2007 -0400
+
+ [PATCH] at76_usb: Eliminate vendor IDs
+
+ They are useless next to comments with full device names.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 0c1af75ef1a71060ddd0e32311b058feaa63ed23
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:09 2007 -0400
+
+ [PATCH] at76_usb: Protect at76_iw_handler_set_scan() with mutex
+
+ This prevents a race condition when a response from an AP comes before
+ we set state to MAC_SCANNING, but after at76_quiesce().
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 71734a46b9d85b85b4e8672461f321f39e48b4aa
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:36:03 2007 -0400
+
+ [PATCH] at76_usb: Improve output of the regdomain id
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 3b19b79d75b5fa2746a277f52abf2690fe1a43f1
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:57 2007 -0400
+
+ [PATCH] at76_usb: Only cancel correct timeouts for Auth and Assoc replies
+
+ Don't cancel all delayed works indiscriminately. In case of
+ at76_rx_mgmt_auth(), cancel the timeout regardless of the status of the
+ reply, as long as the reply is for us.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 76403fd6c014238c564b38d9052298fc9e2a5078
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:52 2007 -0400
+
+ [PATCH] at76_usb: Start beacon timeout task when connected
+
+ Limit beacon timeout task to the managed mode. Don't warn of the wrong
+ mode or state, just exit.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit c56dfaaaada275f4a5c3cdef3dba3e6c714ce03f
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:46 2007 -0400
+
+ [PATCH] at76_usb: Don't disable and enable tasklets, it doesn't work as expected
+
+ Bringing the interface down causes high CPU utilization. Correct fix
+ should probably disable rx URB, not only the rx tasklet.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit c8a13ceeddd58a0c304da7eb8578e44197edad38
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:40 2007 -0400
+
+ [PATCH] at76_usb: Introduce at76_quiesce(), use it to stop network activity
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit ca2c72f021bef2fbb8c2c56e6d0650ba7891f7ca
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:34 2007 -0400
+
+ [PATCH] at76_usb: Fix incorrect queue management in at76_tx_mgmt()
+
+ The old pending buffer should be freed, not the new one. No need to set
+ txbuf to NULL.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 1c4f1ca9448b9300e484e39d57882a7ae38a5729
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:29 2007 -0400
+
+ [PATCH] at76_usb: Rename some long functions and fields
+
+ Mostly try to avoid "bulk", which is a minor technical detail. Also
+ avoid read/write in favor of more common rx/tx.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit fef6c2352ca33980d9aba9232b70aeecace2a134
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:23 2007 -0400
+
+ [PATCH] at76_usb: Fix hex2str() and mac2str() to avoid buffer overlap
+
+ Declarations for two-dimensional arrays were written backwards.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit aa7b9455703286c9823bcbd0a55f3418a0a1b47a
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:17 2007 -0400
+
+ [PATCH] at76_usb: Simplify logic in at76_get_reg_domain()
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 9c13ed40aeed909e386950c302f6d9c130a92b2a
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:11 2007 -0400
+
+ [PATCH] at76_usb: Add minimal support to 505AMX
+
+ Use inline functions for board classification. Drop "_2958" from
+ BOARD_505A_2958, it's implied.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 8a2cb93b3bfc2c23a394f5e4fc8dd6837503640a
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:06 2007 -0400
+
+ [PATCH] at76_usb: Simplify at76_usbdfu_download()
+
+ Make it look similar to at76_load_external_fw()
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 5c777c0514de7cbc6652f10ad55feab36b13d21b
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:35:00 2007 -0400
+
+ [PATCH] at76_usb: Merge at76_download_external_fw() into at76_load_external_fw()
+
+ Simplify logic to ensure that the last block is empty. Unify
+ DFU_PACKETSIZE and EXT_FW_BLOCK_SIZE into FW_BLOCK_SIZE.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 10bbb7977ec0cbea6087d30af14147516a5eeac5
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:54 2007 -0400
+
+ [PATCH] at76_usb: Don't use shift on numeric constants in usb_control_msg() arguments
+
+ We don't know the meaning of 0x0a02 and 0x0902 in at76_get_hw_cfg() and
+ at76_get_hw_cfg_intersil() respectively, so don't pretend that we do.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 2646301bdd06efe9677bb2ef96acc9c450cf1af8
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:49 2007 -0400
+
+ [PATCH] at76_usb: Move (de)initialization functions closer to the end of file
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 0a9cfd63f1773ce2196d15d5ff1214c3c693d8a7
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:43 2007 -0400
+
+ [PATCH] at76_usb: Add myself to the author list
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 684ad32c3e727b65066a896124ed73834f14b087
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:37 2007 -0400
+
+ [PATCH] at76_usb: Avoid overuse of NULL
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit cb9222a5c85ff3634475f04a7949dc7b966c1902
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:31 2007 -0400
+
+ [PATCH] at76_usb: Rewrite at76_alloc_urbs() in a more linear fashion
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 92315ab89a2ffffcb5ef24554489b06e322ea17c
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:26 2007 -0400
+
+ [PATCH] at76_usb: Use existing macros to find bulk in and bulk out endpoints
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit 46211c37a56499d49829d8db2c230712d6053790
+Author: Pavel Roskin <proski at gnu.org>
+Date: Sat Sep 1 00:34:20 2007 -0400
+
+ [PATCH] at76_usb: Protect at76_get_op_mode() and at76_get_mib() against short reads
+
+ Don't rely on usb_control_msg() returning -EPIPE in absence of working
+ firmware. In some cases, no error is returned, but no data is read.
+
+ Interpret short reads as an error, return -EIO.
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+commit cfc3a1a100a86079980e814674004793ad161390
+Author: Pavel Roskin <proski at gnu.org>
+Date: Thu Aug 23 14:40:17 2007 -0400
+
+ [PATCH] Add at76_usb driver
+
+ This driver supports USB devices using Atmel at76c503, at76c505 and
+ at76c505a chipsets. Known devices with this chip are Belkin F5D6050,
+ Dynalink/Askey WLL013, Linksys WUSB11 v2.6, Netgear MA101B and many
+ more.
+
+ All supported devices require firmware, which can be downloaded from
+ http://developer.berlios.de/projects/at76c503a/
+
+ Signed-off-by: Pavel Roskin <proski at gnu.org>
+ Signed-off-by: John W. Linville <linville at tuxdriver.com>
+
+diff -up linux-2.6.24.noarch/MAINTAINERS.orig linux-2.6.24.noarch/MAINTAINERS
+--- linux-2.6.24.noarch/MAINTAINERS.orig 2008-02-05 22:45:15.000000000 -0500
++++ linux-2.6.24.noarch/MAINTAINERS 2008-02-05 22:46:17.000000000 -0500
+@@ -713,6 +713,15 @@ W: http://www.thekelleys.org.uk/atmel
+ W: http://atmelwlandriver.sourceforge.net/
+ S: Maintained
+
++ATMEL USB WIRELESS DRIVER
++P: Pavel Roskin
++M: proski at gnu.org
++L: linux-wireless at vger.kernel.org
++L: at76c503a-user at lists.berlios.de
++L: at76c503a-develop at lists.berlios.de
++W: http://at76c503a.berlios.de/
++S: Maintained
++
+ AUDIT SUBSYSTEM
+ P: David Woodhouse
+ M: dwmw2 at infradead.org
+diff -up /dev/null linux-2.6.24.noarch/drivers/net/wireless/at76_usb.h
+--- /dev/null 2008-02-05 08:32:52.710614252 -0500
++++ linux-2.6.24.noarch/drivers/net/wireless/at76_usb.h 2008-02-05 22:46:17.000000000 -0500
+@@ -0,0 +1,619 @@
++/*
++ * Copyright (c) 2002,2003 Oliver Kurth
++ * (c) 2003,2004 Joerg Albert <joerg.albert at gmx.de>
++ * (c) 2007 Guido Guenther <agx at sigxcpu.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This driver was based on information from the Sourceforge driver
++ * released and maintained by Atmel:
++ *
++ * http://sourceforge.net/projects/atmelwlandriver/
++ *
++ * Although the code was completely re-written,
++ * it would have been impossible without Atmel's decision to
++ * release an Open Source driver (unfortunately the firmware was
++ * kept binary only). Thanks for that decision to Atmel!
++ */
++
++#ifndef _AT76_USB_H
++#define _AT76_USB_H
++
++/* Board types */
++enum board_type {
++ BOARD_503_ISL3861 = 1,
++ BOARD_503_ISL3863 = 2,
++ BOARD_503 = 3,
++ BOARD_503_ACC = 4,
++ BOARD_505 = 5,
++ BOARD_505_2958 = 6,
++ BOARD_505A = 7,
++ BOARD_505AMX = 8
++};
++
++/* our private ioctl's */
++/* preamble length (0 - long, 1 - short, 2 - auto) */
++#define AT76_SET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 0)
++#define AT76_GET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 1)
++/* which debug channels are enabled */
++#define AT76_SET_DEBUG (SIOCIWFIRSTPRIV + 2)
++#define AT76_GET_DEBUG (SIOCIWFIRSTPRIV + 3)
++/* power save mode (incl. the Atmel proprietary smart save mode) */
++#define AT76_SET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 4)
++#define AT76_GET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 5)
++/* min and max channel times for scan */
++#define AT76_SET_SCAN_TIMES (SIOCIWFIRSTPRIV + 6)
++#define AT76_GET_SCAN_TIMES (SIOCIWFIRSTPRIV + 7)
++/* scan mode (0 - active, 1 - passive) */
++#define AT76_SET_SCAN_MODE (SIOCIWFIRSTPRIV + 8)
++#define AT76_GET_SCAN_MODE (SIOCIWFIRSTPRIV + 9)
++
++#define CMD_STATUS_IDLE 0x00
++#define CMD_STATUS_COMPLETE 0x01
++#define CMD_STATUS_UNKNOWN 0x02
++#define CMD_STATUS_INVALID_PARAMETER 0x03
++#define CMD_STATUS_FUNCTION_NOT_SUPPORTED 0x04
++#define CMD_STATUS_TIME_OUT 0x07
++#define CMD_STATUS_IN_PROGRESS 0x08
++#define CMD_STATUS_HOST_FAILURE 0xff
++#define CMD_STATUS_SCAN_FAILED 0xf0
++
++/* answers to get op mode */
++#define OPMODE_NONE 0x00
++#define OPMODE_NORMAL_NIC_WITH_FLASH 0x01
++#define OPMODE_HW_CONFIG_MODE 0x02
++#define OPMODE_DFU_MODE_WITH_FLASH 0x03
++#define OPMODE_NORMAL_NIC_WITHOUT_FLASH 0x04
++
++#define CMD_SET_MIB 0x01
++#define CMD_GET_MIB 0x02
++#define CMD_SCAN 0x03
++#define CMD_JOIN 0x04
++#define CMD_START_IBSS 0x05
++#define CMD_RADIO_ON 0x06
++#define CMD_RADIO_OFF 0x07
++#define CMD_STARTUP 0x0B
++
++#define MIB_LOCAL 0x01
++#define MIB_MAC_ADDR 0x02
++#define MIB_MAC 0x03
++#define MIB_MAC_MGMT 0x05
++#define MIB_MAC_WEP 0x06
++#define MIB_PHY 0x07
++#define MIB_FW_VERSION 0x08
++#define MIB_MDOMAIN 0x09
++
++#define ADHOC_MODE 1
++#define INFRASTRUCTURE_MODE 2
++
++/* values for struct mib_local, field preamble_type */
++#define PREAMBLE_TYPE_LONG 0
++#define PREAMBLE_TYPE_SHORT 1
++#define PREAMBLE_TYPE_AUTO 2
++
++/* values for tx_rate */
++#define TX_RATE_1MBIT 0
++#define TX_RATE_2MBIT 1
++#define TX_RATE_5_5MBIT 2
++#define TX_RATE_11MBIT 3
++#define TX_RATE_AUTO 4
++
++/* power management modes */
++#define AT76_PM_OFF 1
++#define AT76_PM_ON 2
++#define AT76_PM_SMART 3
++
++struct hwcfg_r505 {
++ u8 cr39_values[14];
++ u8 reserved1[14];
++ u8 bb_cr[14];
++ u8 pidvid[4];
++ u8 mac_addr[ETH_ALEN];
++ u8 regulatory_domain;
++ u8 reserved2[14];
++ u8 cr15_values[14];
++ u8 reserved3[3];
++} __attribute__((packed));
++
++struct hwcfg_rfmd {
++ u8 cr20_values[14];
++ u8 cr21_values[14];
++ u8 bb_cr[14];
++ u8 pidvid[4];
++ u8 mac_addr[ETH_ALEN];
++ u8 regulatory_domain;
++ u8 low_power_values[14];
++ u8 normal_power_values[14];
++ u8 reserved1[3];
++} __attribute__((packed));
++
++struct hwcfg_intersil {
++ u8 mac_addr[ETH_ALEN];
++ u8 cr31_values[14];
++ u8 cr58_values[14];
++ u8 pidvid[4];
++ u8 regulatory_domain;
++ u8 reserved[1];
++} __attribute__((packed));
++
++union at76_hwcfg {
++ struct hwcfg_intersil i;
++ struct hwcfg_rfmd r3;
++ struct hwcfg_r505 r5;
++};
++
++#define WEP_SMALL_KEY_LEN (40 / 8)
++#define WEP_LARGE_KEY_LEN (104 / 8)
++
++struct at76_card_config {
++ u8 exclude_unencrypted;
++ u8 promiscuous_mode;
++ u8 short_retry_limit;
++ u8 encryption_type;
++ __le16 rts_threshold;
++ __le16 fragmentation_threshold; /* 256..2346 */
++ u8 basic_rate_set[4];
++ u8 auto_rate_fallback; /* 0,1 */
++ u8 channel;
++ u8 privacy_invoked;
++ u8 wep_default_key_id; /* 0..3 */
++ u8 current_ssid[32];
++ u8 wep_default_key_value[4][WEP_KEY_LEN];
++ u8 ssid_len;
++ u8 short_preamble;
++ __le16 beacon_period;
++} __attribute__((packed));
++
++struct at76_command {
++ u8 cmd;
++ u8 reserved;
++ __le16 size;
++ u8 data[0];
++} __attribute__((packed));
++
++/* Length of Atmel-specific Rx header before 802.11 frame */
++#define AT76_RX_HDRLEN offsetof(struct at76_rx_buffer, packet)
++
++struct at76_rx_buffer {
++ __le16 wlength;
++ u8 rx_rate;
++ u8 newbss;
++ u8 fragmentation;
++ u8 rssi;
++ u8 link_quality;
++ u8 noise_level;
++ __le32 rx_time;
++ u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
++} __attribute__((packed));
++
++/* Length of Atmel-specific Tx header before 802.11 frame */
++#define AT76_TX_HDRLEN offsetof(struct at76_tx_buffer, packet)
++
++struct at76_tx_buffer {
++ __le16 wlength;
++ u8 tx_rate;
++ u8 padding;
++ u8 reserved[4];
++ u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
++} __attribute__((packed));
++
++/* defines for scan_type below */
++#define SCAN_TYPE_ACTIVE 0
++#define SCAN_TYPE_PASSIVE 1
++
++struct at76_req_scan {
++ u8 bssid[ETH_ALEN];
++ u8 essid[32];
++ u8 scan_type;
++ u8 channel;
++ __le16 probe_delay;
++ __le16 min_channel_time;
++ __le16 max_channel_time;
++ u8 essid_size;
++ u8 international_scan;
++} __attribute__((packed));
++
++struct at76_req_ibss {
++ u8 bssid[ETH_ALEN];
++ u8 essid[32];
++ u8 bss_type;
++ u8 channel;
++ u8 essid_size;
++ u8 reserved[3];
++} __attribute__((packed));
++
++struct at76_req_join {
++ u8 bssid[ETH_ALEN];
++ u8 essid[32];
++ u8 bss_type;
++ u8 channel;
++ __le16 timeout;
++ u8 essid_size;
++ u8 reserved;
++} __attribute__((packed));
++
++struct set_mib_buffer {
++ u8 type;
++ u8 size;
++ u8 index;
++ u8 reserved;
++ union {
++ u8 byte;
++ __le16 word;
++ u8 addr[ETH_ALEN];
++ } data;
++} __attribute__((packed));
++
++struct mib_local {
++ u16 reserved0;
++ u8 beacon_enable;
++ u8 txautorate_fallback;
++ u8 reserved1;
++ u8 ssid_size;
++ u8 promiscuous_mode;
++ u16 reserved2;
++ u8 preamble_type;
++ u16 reserved3;
++} __attribute__((packed));
++
++struct mib_mac_addr {
++ u8 mac_addr[ETH_ALEN];
++ u8 res[2]; /* ??? */
++ u8 group_addr[4][ETH_ALEN];
++ u8 group_addr_status[4];
++} __attribute__((packed));
++
++struct mib_mac {
++ __le32 max_tx_msdu_lifetime;
++ __le32 max_rx_lifetime;
++ __le16 frag_threshold;
++ __le16 rts_threshold;
++ __le16 cwmin;
++ __le16 cwmax;
++ u8 short_retry_time;
++ u8 long_retry_time;
++ u8 scan_type; /* active or passive */
++ u8 scan_channel;
++ __le16 probe_delay; /* delay before ProbeReq in active scan, RO */
++ __le16 min_channel_time;
++ __le16 max_channel_time;
++ __le16 listen_interval;
++ u8 desired_ssid[32];
++ u8 desired_bssid[ETH_ALEN];
++ u8 desired_bsstype; /* ad-hoc or infrastructure */
++ u8 reserved2;
++} __attribute__((packed));
++
++struct mib_mac_mgmt {
++ __le16 beacon_period;
++ __le16 CFP_max_duration;
++ __le16 medium_occupancy_limit;
++ __le16 station_id; /* assoc id */
++ __le16 ATIM_window;
++ u8 CFP_mode;
++ u8 privacy_option_implemented;
++ u8 DTIM_period;
++ u8 CFP_period;
++ u8 current_bssid[ETH_ALEN];
++ u8 current_essid[32];
++ u8 current_bss_type;
++ u8 power_mgmt_mode;
++ /* rfmd and 505 */
++ u8 ibss_change;
++ u8 res;
++ u8 multi_domain_capability_implemented;
++ u8 multi_domain_capability_enabled;
++ u8 country_string[3];
++ u8 reserved[3];
++} __attribute__((packed));
++
++struct mib_mac_wep {
++ u8 privacy_invoked; /* 0 disable encr., 1 enable encr */
++ u8 wep_default_key_id;
++ u8 wep_key_mapping_len;
++ u8 exclude_unencrypted;
++ __le32 wep_icv_error_count;
++ __le32 wep_excluded_count;
++ u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN];
++ u8 encryption_level; /* 1 for 40bit, 2 for 104bit encryption */
++} __attribute__((packed));
++
++struct mib_phy {
++ __le32 ed_threshold;
++
++ __le16 slot_time;
++ __le16 sifs_time;
++ __le16 preamble_length;
++ __le16 plcp_header_length;
++ __le16 mpdu_max_length;
++ __le16 cca_mode_supported;
++
++ u8 operation_rate_set[4];
++ u8 channel_id;
++ u8 current_cca_mode;
++ u8 phy_type;
++ u8 current_reg_domain;
++} __attribute__((packed));
++
++struct mib_fw_version {
++ u8 major;
++ u8 minor;
++ u8 patch;
++ u8 build;
++} __attribute__((packed));
++
++struct mib_mdomain {
++ u8 tx_powerlevel[14];
++ u8 channel_list[14]; /* 0 for invalid channels */
++} __attribute__((packed));
++
++struct at76_fw_header {
++ __le32 crc; /* CRC32 of the whole image */
++ __le32 board_type; /* firmware compatibility code */
++ u8 build; /* firmware build number */
++ u8 patch; /* firmware patch level */
++ u8 minor; /* firmware minor version */
++ u8 major; /* firmware major version */
++ __le32 str_offset; /* offset of the copyright string */
++ __le32 int_fw_offset; /* internal firmware image offset */
++ __le32 int_fw_len; /* internal firmware image length */
++ __le32 ext_fw_offset; /* external firmware image offset */
++ __le32 ext_fw_len; /* external firmware image length */
++} __attribute__((packed));
++
++enum mac_state {
++ MAC_INIT,
++ MAC_SCANNING,
++ MAC_AUTH,
++ MAC_ASSOC,
++ MAC_JOINING,
++ MAC_CONNECTED,
++ MAC_OWN_IBSS
++};
++
++/* a description of a regulatory domain and the allowed channels */
++struct reg_domain {
++ u16 code;
++ char const *name;
++ u32 channel_map; /* if bit N is set, channel (N+1) is allowed */
++};
++
++/* how long do we keep a (I)BSS in the bss_list in jiffies
++ this should be long enough for the user to retrieve the table
++ (by iwlist ?) after the device started, because all entries from
++ other channels than the one the device locks on get removed, too */
++#define BSS_LIST_TIMEOUT (120 * HZ)
++/* struct to store BSS info found during scan */
++#define BSS_LIST_MAX_RATE_LEN 32 /* 32 rates should be enough ... */
++
++struct bss_info {
++ struct list_head list;
++
++ u8 bssid[ETH_ALEN]; /* bssid */
++ u8 ssid[IW_ESSID_MAX_SIZE]; /* essid */
++ u8 ssid_len; /* length of ssid above */
++ u8 channel;
++ u16 capa; /* BSS capabilities */
++ u16 beacon_interval; /* beacon interval, Kus (1024 microseconds) */
++ u8 rates[BSS_LIST_MAX_RATE_LEN]; /* supported rates in units of
++ 500 kbps, ORed with 0x80 for
++ basic rates */
++ u8 rates_len;
++
++ /* quality of received beacon */
++ u8 rssi;
++ u8 link_qual;
++ u8 noise_level;
++
++ unsigned long last_rx; /* time (jiffies) of last beacon received */
++};
++
++/* a rx data buffer to collect rx fragments */
++struct rx_data_buf {
++ u8 sender[ETH_ALEN]; /* sender address */
++ u16 seqnr; /* sequence number */
++ u16 fragnr; /* last fragment received */
++ unsigned long last_rx; /* jiffies of last rx */
++ struct sk_buff *skb; /* == NULL if entry is free */
++};
++
++#define NR_RX_DATA_BUF 8
++
++/* Data for one loaded firmware file */
++struct fwentry {
++ const char *const fwname;
++ const struct firmware *fw;
++ int extfw_size;
++ int intfw_size;
++ /* pointer to loaded firmware, no need to free */
++ u8 *extfw; /* external firmware, extfw_size bytes long */
++ u8 *intfw; /* internal firmware, intfw_size bytes long */
++ enum board_type board_type; /* board type */
++ struct mib_fw_version fw_version;
++ int loaded; /* Loaded and parsed successfully */
++};
++
++struct at76_priv {
++ struct usb_device *udev; /* USB device pointer */
++ struct net_device *netdev; /* net device pointer */
++ struct net_device_stats stats; /* net device stats */
++ struct iw_statistics wstats; /* wireless stats */
++
++ struct sk_buff *rx_skb; /* skbuff for receiving data */
++ void *bulk_out_buffer; /* buffer for sending data */
++
++ struct urb *tx_urb; /* URB for sending data */
++ struct urb *rx_urb; /* URB for receiving data */
++
++ unsigned int tx_pipe; /* bulk out pipe */
++ unsigned int rx_pipe; /* bulk in pipe */
++
++ struct mutex mtx; /* locks this structure */
++
++ /* work queues */
++ struct work_struct work_assoc_done;
++ struct work_struct work_join;
++ struct work_struct work_new_bss;
++ struct work_struct work_start_scan;
++ struct work_struct work_set_promisc;
++ struct work_struct work_submit_rx;
++ struct delayed_work dwork_restart;
++ struct delayed_work dwork_get_scan;
++ struct delayed_work dwork_beacon;
++ struct delayed_work dwork_auth;
++ struct delayed_work dwork_assoc;
++
++ struct tasklet_struct rx_tasklet;
++
++ /* the WEP stuff */
++ int wep_enabled; /* 1 if WEP is enabled */
++ int wep_key_id; /* key id to be used */
++ u8 wep_keys[WEP_KEYS][WEP_KEY_LEN]; /* the four WEP keys,
++ 5 or 13 bytes are used */
++ u8 wep_keys_len[WEP_KEYS]; /* the length of the above keys */
++
++ int channel;
++ int iw_mode;
++ u8 bssid[ETH_ALEN];
++ u8 essid[IW_ESSID_MAX_SIZE];
++ int essid_size;
++ int radio_on;
++ int promisc;
++
++ int preamble_type; /* 0 - long, 1 - short, 2 - auto */
++ int auth_mode; /* authentication type: 0 open, 1 shared key */
++ int txrate; /* 0,1,2,3 = 1,2,5.5,11 Mbps, 4 is auto */
++ int frag_threshold; /* threshold for fragmentation of tx packets */
++ int rts_threshold; /* threshold for RTS mechanism */
++ int short_retry_limit;
++
++ int scan_min_time; /* scan min channel time */
++ int scan_max_time; /* scan max channel time */
++ int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
++ int scan_need_any; /* if set, need to scan for any ESSID */
++
++ /* the list we got from scanning */
++ spinlock_t bss_list_spinlock; /* protects bss_list operations */
++ struct list_head bss_list; /* list of BSS we got beacons from */
++ struct timer_list bss_list_timer; /* timer to purge old entries
++ from bss_list */
++ struct bss_info *curr_bss; /* current BSS */
++ u16 assoc_id; /* current association ID, if associated */
++
++ u8 wanted_bssid[ETH_ALEN];
++ int wanted_bssid_valid; /* != 0 if wanted_bssid is to be used */
++
++ /* some data for infrastructure mode only */
++ spinlock_t mgmt_spinlock; /* this spinlock protects access to
++ next_mgmt_bulk */
++
++ struct at76_tx_buffer *next_mgmt_bulk; /* pending management msg to
++ send via bulk out */
++ enum mac_state mac_state;
++ enum {
++ SCAN_IDLE,
++ SCAN_IN_PROGRESS,
++ SCAN_COMPLETED
++ } scan_state;
++ time_t last_scan;
++
++ int retries; /* remaining retries in case of timeout when
++ * sending AuthReq or AssocReq */
++ u8 pm_mode; /* power management mode */
++ u32 pm_period; /* power management period in microseconds */
++
++ struct reg_domain const *domain; /* reg domain description */
++
++ /* iwspy support */
++ spinlock_t spy_spinlock;
++ struct iw_spy_data spy_data;
++
++ struct iw_public_data wireless_data;
++
++ /* These fields contain HW config provided by the device (not all of
++ * these fields are used by all board types) */
++ u8 mac_addr[ETH_ALEN];
++ u8 regulatory_domain;
++
++ struct at76_card_config card_config;
++
++ /* store rx fragments until complete */
++ struct rx_data_buf rx_data[NR_RX_DATA_BUF];
++
++ enum board_type board_type;
++ struct mib_fw_version fw_version;
++
++ unsigned int device_unplugged:1;
++ unsigned int netdev_registered:1;
++ struct set_mib_buffer mib_buf; /* global buffer for set_mib calls */
++
++ /* beacon counting */
++ int beacon_period; /* period of mgmt beacons, Kus */
++ int beacons_received;
++ unsigned long beacons_last_qual; /* time we restarted counting
++ beacons */
++};
++
++struct at76_rx_radiotap {
++ struct ieee80211_radiotap_header rt_hdr;
++ __le64 rt_tsft;
++ u8 rt_flags;
++ u8 rt_rate;
++ s8 rt_signal;
++ s8 rt_noise;
++};
++
++#define AT76_RX_RADIOTAP_PRESENT \
++ ((1 << IEEE80211_RADIOTAP_TSFT) | \
++ (1 << IEEE80211_RADIOTAP_FLAGS) | \
++ (1 << IEEE80211_RADIOTAP_RATE) | \
++ (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \
++ (1 << IEEE80211_RADIOTAP_DB_ANTNOISE))
++
++#define BEACON_MAX_DATA_LENGTH 1500
++
++/* the maximum size of an AssocReq packet */
++#define ASSOCREQ_MAX_SIZE \
++ (AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \
++ 1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4)
++
++/* for shared secret auth, add the challenge text size */
++#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth))
++
++/* Maximal number of AuthReq retries */
++#define AUTH_RETRIES 3
++
++/* Maximal number of AssocReq retries */
++#define ASSOC_RETRIES 3
++
++/* Beacon timeout in managed mode when we are connected */
++#define BEACON_TIMEOUT (10 * HZ)
++
++/* Timeout for authentication response */
++#define AUTH_TIMEOUT (1 * HZ)
++
++/* Timeout for association response */
++#define ASSOC_TIMEOUT (1 * HZ)
++
++/* Polling interval when scan is running */
++#define SCAN_POLL_INTERVAL (HZ / 4)
++
++/* Command completion timeout */
++#define CMD_COMPLETION_TIMEOUT (5 * HZ)
++
++#define DEF_RTS_THRESHOLD 1536
++#define DEF_FRAG_THRESHOLD 1536
++#define DEF_SHORT_RETRY_LIMIT 8
++#define DEF_CHANNEL 10
++#define DEF_SCAN_MIN_TIME 10
++#define DEF_SCAN_MAX_TIME 120
++
++#define MAX_RTS_THRESHOLD (MAX_FRAG_THRESHOLD + 1)
++
++/* the max padding size for tx in bytes (see calc_padding) */
++#define MAX_PADDING_SIZE 53
++
++#endif /* _AT76_USB_H */
+diff -up linux-2.6.24.noarch/drivers/net/wireless/Makefile.orig linux-2.6.24.noarch/drivers/net/wireless/Makefile
+--- linux-2.6.24.noarch/drivers/net/wireless/Makefile.orig 2008-02-05 22:45:16.000000000 -0500
++++ linux-2.6.24.noarch/drivers/net/wireless/Makefile 2008-02-05 22:46:17.000000000 -0500
+@@ -32,6 +32,8 @@ obj-$(CONFIG_ATMEL) += atmel
+ obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
+ obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
+
++obj-$(CONFIG_USB_ATMEL) += at76_usb.o
++
+ obj-$(CONFIG_PRISM54) += prism54/
+
+ obj-$(CONFIG_HOSTAP) += hostap/
+diff -up /dev/null linux-2.6.24.noarch/drivers/net/wireless/at76_usb.c
+--- /dev/null 2008-02-05 08:32:52.710614252 -0500
++++ linux-2.6.24.noarch/drivers/net/wireless/at76_usb.c 2008-02-05 22:46:17.000000000 -0500
+@@ -0,0 +1,5558 @@
++/*
++ * at76c503/at76c505 USB driver
++ *
++ * Copyright (c) 2002 - 2003 Oliver Kurth
++ * Copyright (c) 2004 Joerg Albert <joerg.albert at gmx.de>
++ * Copyright (c) 2004 Nick Jones
++ * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453 at hotmail.com>
++ * Copyright (c) 2007 Guido Guenther <agx at sigxcpu.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This file is part of the Berlios driver for WLAN USB devices based on the
++ * Atmel AT76C503A/505/505A.
++ *
++ * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/list.h>
++#include <linux/usb.h>
++#include <linux/netdevice.h>
++#include <linux/if_arp.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/wireless.h>
++#include <net/iw_handler.h>
++#include <net/ieee80211_radiotap.h>
++#include <linux/firmware.h>
++#include <linux/leds.h>
++#include <net/ieee80211.h>
++
++#include "at76_usb.h"
++
++/* Version information */
++#define DRIVER_NAME "at76_usb"
++#define DRIVER_VERSION "0.17"
++#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
++
++/* at76_debug bits */
++#define DBG_PROGRESS 0x00000001 /* authentication/accociation */
++#define DBG_BSS_TABLE 0x00000002 /* show BSS table after scans */
++#define DBG_IOCTL 0x00000004 /* ioctl calls / settings */
++#define DBG_MAC_STATE 0x00000008 /* MAC state transitions */
++#define DBG_TX_DATA 0x00000010 /* tx header */
++#define DBG_TX_DATA_CONTENT 0x00000020 /* tx content */
++#define DBG_TX_MGMT 0x00000040 /* tx management */
++#define DBG_RX_DATA 0x00000080 /* rx data header */
++#define DBG_RX_DATA_CONTENT 0x00000100 /* rx data content */
++#define DBG_RX_MGMT 0x00000200 /* rx mgmt frame headers */
++#define DBG_RX_BEACON 0x00000400 /* rx beacon */
++#define DBG_RX_CTRL 0x00000800 /* rx control */
++#define DBG_RX_MGMT_CONTENT 0x00001000 /* rx mgmt content */
++#define DBG_RX_FRAGS 0x00002000 /* rx data fragment handling */
++#define DBG_DEVSTART 0x00004000 /* fw download, device start */
++#define DBG_URB 0x00008000 /* rx urb status, ... */
++#define DBG_RX_ATMEL_HDR 0x00010000 /* Atmel-specific Rx headers */
++#define DBG_PROC_ENTRY 0x00020000 /* procedure entries/exits */
++#define DBG_PM 0x00040000 /* power management settings */
++#define DBG_BSS_MATCH 0x00080000 /* BSS match failures */
++#define DBG_PARAMS 0x00100000 /* show configured parameters */
++#define DBG_WAIT_COMPLETE 0x00200000 /* command completion */
++#define DBG_RX_FRAGS_SKB 0x00400000 /* skb header of Rx fragments */
++#define DBG_BSS_TABLE_RM 0x00800000 /* purging bss table entries */
++#define DBG_MONITOR_MODE 0x01000000 /* monitor mode */
++#define DBG_MIB 0x02000000 /* dump all MIBs on startup */
++#define DBG_MGMT_TIMER 0x04000000 /* dump mgmt_timer ops */
++#define DBG_WE_EVENTS 0x08000000 /* dump wireless events */
++#define DBG_FW 0x10000000 /* firmware download */
++#define DBG_DFU 0x20000000 /* device firmware upgrade */
++
++#define DBG_DEFAULTS 0
++
++/* Use our own dbg macro */
++#define at76_dbg(bits, format, arg...) \
++ do { \
++ if (at76_debug & (bits)) \
++ printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
++ } while (0)
++
++static int at76_debug = DBG_DEFAULTS;
++
++/* Protect against concurrent firmware loading and parsing */
++static struct mutex fw_mutex;
++
++static struct fwentry firmwares[] = {
++ [0] = {""},
++ [BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"},
++ [BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"},
++ [BOARD_503] = {"atmel_at76c503-rfmd.bin"},
++ [BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"},
++ [BOARD_505] = {"atmel_at76c505-rfmd.bin"},
++ [BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"},
++ [BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"},
++ [BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"},
++};
++
++#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops)
++
++static struct usb_device_id dev_table[] = {
++ /*
++ * at76c503-i3861
++ */
++ /* Generic AT76C503/3861 device */
++ {USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Linksys WUSB11 v2.1/v2.6 */
++ {USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Netgear MA101 rev. A */
++ {USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Tekram U300C / Allnet ALL0193 */
++ {USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* HP HN210W J7801A */
++ {USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Sitecom/Z-Com/Zyxel M4Y-750 */
++ {USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Dynalink/Askey WLL013 (intersil) */
++ {USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
++ {USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* BenQ AWL300 */
++ {USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Addtron AWU-120, Compex WLU11 */
++ {USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Intel AP310 AnyPoint II USB */
++ {USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Dynalink L11U */
++ {USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* Arescom WL-210, FCC id 07J-GL2411USB */
++ {USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* I-O DATA WN-B11/USB */
++ {USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /* BT Voyager 1010 */
++ {USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++ /*
++ * at76c503-i3863
++ */
++ /* Generic AT76C503/3863 device */
++ {USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)},
++ /* Samsung SWL-2100U */
++ {USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)},
++ /*
++ * at76c503-rfmd
++ */
++ /* Generic AT76C503/RFMD device */
++ {USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)},
++ /* Dynalink/Askey WLL013 (rfmd) */
++ {USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)},
++ /* Linksys WUSB11 v2.6 */
++ {USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)},
++ /* Network Everywhere NWU11B */
++ {USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)},
++ /* Netgear MA101 rev. B */
++ {USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)},
++ /* D-Link DWL-120 rev. E */
++ {USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)},
++ /* Actiontec 802UAT1, HWU01150-01UK */
++ {USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)},
++ /* AirVast W-Buddie WN210 */
++ {USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)},
++ /* Dick Smith Electronics XH1153 802.11b USB adapter */
++ {USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)},
++ /* CNet CNUSB611 */
++ {USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)},
++ /* FiberLine FL-WL200U */
++ {USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)},
++ /* BenQ AWL400 USB stick */
++ {USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)},
++ /* 3Com 3CRSHEW696 */
++ {USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)},
++ /* Siemens Santis ADSL WLAN USB adapter WLL 013 */
++ {USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)},
++ /* Belkin F5D6050, version 2 */
++ {USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)},
++ /* iBlitzz, BWU613 (not *B or *SB) */
++ {USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)},
++ /* Gigabyte GN-WLBM101 */
++ {USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)},
++ /* Planex GW-US11S */
++ {USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)},
++ /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
++ {USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)},
++ /* Corega Wireless LAN USB-11 mini */
++ {USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)},
++ /* Corega Wireless LAN USB-11 mini2 */
++ {USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)},
++ /* Uniden PCW100 */
++ {USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)},
++ /*
++ * at76c503-rfmd-acc
++ */
++ /* SMC2664W */
++ {USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)},
++ /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
++ {USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)},
++ /*
++ * at76c505-rfmd
++ */
++ /* Generic AT76C505/RFMD */
++ {USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)},
++ /*
++ * at76c505-rfmd2958
++ */
++ /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
++ {USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
++ /* Fiberline FL-WL240U */
++ {USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)},
++ /* CNet CNUSB-611G */
++ {USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)},
++ /* Linksys WUSB11 v2.8 */
++ {USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)},
++ /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
++ {USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)},
++ /* Corega WLAN USB Stick 11 */
++ {USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
++ /* Microstar MSI Box MS6978 */
++ {USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)},
++ /*
++ * at76c505a-rfmd2958
++ */
++ /* Generic AT76C505A device */
++ {USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)},
++ /* Generic AT76C505AS device */
++ {USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)},
++ /* Siemens Gigaset USB WLAN Adapter 11 */
++ {USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)},
++ /*
++ * at76c505amx-rfmd
++ */
++ /* Generic AT76C505AMX device */
++ {USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)},
++ {}
++};
++
++MODULE_DEVICE_TABLE(usb, dev_table);
++
++/* Supported rates of this hardware, bit 7 marks basic rates */
++static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
++
++/* Frequency of each channel in MHz */
++static const long channel_frequency[] = {
++ 2412, 2417, 2422, 2427, 2432, 2437, 2442,
++ 2447, 2452, 2457, 2462, 2467, 2472, 2484
++};
++
++#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
++
++static const char *const preambles[] = { "long", "short", "auto" };
++
++static const char *const mac_states[] = {
++ [MAC_INIT] = "INIT",
++ [MAC_SCANNING] = "SCANNING",
++ [MAC_AUTH] = "AUTH",
++ [MAC_ASSOC] = "ASSOC",
++ [MAC_JOINING] = "JOINING",
++ [MAC_CONNECTED] = "CONNECTED",
++ [MAC_OWN_IBSS] = "OWN_IBSS"
++};
++
++/* Firmware download */
++/* DFU states */
++#define STATE_IDLE 0x00
++#define STATE_DETACH 0x01
++#define STATE_DFU_IDLE 0x02
++#define STATE_DFU_DOWNLOAD_SYNC 0x03
++#define STATE_DFU_DOWNLOAD_BUSY 0x04
++#define STATE_DFU_DOWNLOAD_IDLE 0x05
++#define STATE_DFU_MANIFEST_SYNC 0x06
++#define STATE_DFU_MANIFEST 0x07
++#define STATE_DFU_MANIFEST_WAIT_RESET 0x08
++#define STATE_DFU_UPLOAD_IDLE 0x09
++#define STATE_DFU_ERROR 0x0a
++
++/* DFU commands */
++#define DFU_DETACH 0
++#define DFU_DNLOAD 1
++#define DFU_UPLOAD 2
++#define DFU_GETSTATUS 3
++#define DFU_CLRSTATUS 4
++#define DFU_GETSTATE 5
++#define DFU_ABORT 6
++
++#define FW_BLOCK_SIZE 1024
++
++struct dfu_status {
++ unsigned char status;
++ unsigned char poll_timeout[3];
++ unsigned char state;
++ unsigned char string;
++} __attribute__((packed));
++
++static inline int at76_is_intersil(enum board_type board)
++{
++ return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
++}
++
++static inline int at76_is_503rfmd(enum board_type board)
++{
++ return (board == BOARD_503 || board == BOARD_503_ACC);
++}
++
++static inline int at76_is_505a(enum board_type board)
++{
++ return (board == BOARD_505A || board == BOARD_505AMX);
++}
++
++/* Load a block of the first (internal) part of the firmware */
++static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
++ void *block, int size)
++{
++ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
++ USB_TYPE_CLASS | USB_DIR_OUT |
++ USB_RECIP_INTERFACE, blockno, 0, block, size,
++ USB_CTRL_GET_TIMEOUT);
++}
++
++static int at76_dfu_get_status(struct usb_device *udev,
++ struct dfu_status *status)
++{
++ int ret;
++
++ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
++ USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
++ 0, 0, status, sizeof(struct dfu_status),
++ USB_CTRL_GET_TIMEOUT);
++ return ret;
++}
++
++static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state)
++{
++ int ret;
++
++ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
++ USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
++ 0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
++ return ret;
++}
++
++/* Convert timeout from the DFU status to jiffies */
++static inline unsigned long at76_get_timeout(struct dfu_status *s)
++{
++ return msecs_to_jiffies((s->poll_timeout[2] << 16)
++ | (s->poll_timeout[1] << 8)
++ | (s->poll_timeout[0]));
++}
++
++/* Load internal firmware from the buffer. If manifest_sync_timeout > 0, use
++ * its value in jiffies in the MANIFEST_SYNC state. */
++static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
++ int manifest_sync_timeout)
++{
++ u8 *block;
++ struct dfu_status dfu_stat_buf;
++ int ret = 0;
++ int need_dfu_state = 1;
++ int is_done = 0;
++ u8 dfu_state = 0;
++ u32 dfu_timeout = 0;
++ int bsize = 0;
++ int blockno = 0;
++
++ at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
++ manifest_sync_timeout);
++
++ if (!size) {
++ dev_printk(KERN_ERR, &udev->dev, "FW buffer length invalid!\n");
++ return -EINVAL;
++ }
++
++ block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
++ if (!block)
++ return -ENOMEM;
++
++ do {
++ if (need_dfu_state) {
++ ret = at76_dfu_get_state(udev, &dfu_state);
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &udev->dev,
++ "cannot get DFU state: %d\n", ret);
++ goto exit;
++ }
++ need_dfu_state = 0;
++ }
++
++ switch (dfu_state) {
++ case STATE_DFU_DOWNLOAD_SYNC:
++ at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
++ ret = at76_dfu_get_status(udev, &dfu_stat_buf);
++ if (ret >= 0) {
++ dfu_state = dfu_stat_buf.state;
++ dfu_timeout = at76_get_timeout(&dfu_stat_buf);
++ need_dfu_state = 0;
++ } else
++ dev_printk(KERN_ERR, &udev->dev,
++ "at76_dfu_get_status returned %d\n",
++ ret);
++ break;
++
++ case STATE_DFU_DOWNLOAD_BUSY:
++ at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
++ need_dfu_state = 1;
++
++ at76_dbg(DBG_DFU, "DFU: Resetting device");
++ schedule_timeout_interruptible(dfu_timeout);
++ break;
++
++ case STATE_DFU_DOWNLOAD_IDLE:
++ at76_dbg(DBG_DFU, "DOWNLOAD...");
++ /* fall through */
++ case STATE_DFU_IDLE:
++ at76_dbg(DBG_DFU, "DFU IDLE");
++
++ bsize = min_t(int, size, FW_BLOCK_SIZE);
++ memcpy(block, buf, bsize);
++ at76_dbg(DBG_DFU, "int fw, size left = %5d, "
++ "bsize = %4d, blockno = %2d", size, bsize,
++ blockno);
++ ret =
++ at76_load_int_fw_block(udev, blockno, block, bsize);
++ buf += bsize;
++ size -= bsize;
++ blockno++;
++
++ if (ret != bsize)
++ dev_printk(KERN_ERR, &udev->dev,
++ "at76_load_int_fw_block "
++ "returned %d\n", ret);
++ need_dfu_state = 1;
++ break;
++
++ case STATE_DFU_MANIFEST_SYNC:
++ at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
++
++ ret = at76_dfu_get_status(udev, &dfu_stat_buf);
++ if (ret < 0)
++ break;
++
++ dfu_state = dfu_stat_buf.state;
++ dfu_timeout = at76_get_timeout(&dfu_stat_buf);
++ need_dfu_state = 0;
++
++ /* override the timeout from the status response,
++ needed for AT76C505A */
++ if (manifest_sync_timeout > 0)
++ dfu_timeout = manifest_sync_timeout;
++
++ at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
++ schedule_timeout_interruptible(dfu_timeout);
++ break;
++
++ case STATE_DFU_MANIFEST:
++ at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
++ is_done = 1;
++ break;
++
++ case STATE_DFU_MANIFEST_WAIT_RESET:
++ at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
++ is_done = 1;
++ break;
++
++ case STATE_DFU_UPLOAD_IDLE:
++ at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
++ break;
++
++ case STATE_DFU_ERROR:
++ at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
++ ret = -EPIPE;
++ break;
++
++ default:
++ at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", dfu_state);
++ ret = -EINVAL;
++ break;
++ }
++ } while (!is_done && (ret >= 0));
++
++exit:
++ kfree(block);
++ if (ret >= 0)
++ ret = 0;
++
++ return ret;
++}
++
++/* Report that the scan results are ready */
++static inline void at76_iwevent_scan_complete(struct net_device *netdev)
++{
++ union iwreq_data wrqu;
++ wrqu.data.length = 0;
++ wrqu.data.flags = 0;
++ wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL);
++ at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name);
++}
++
++static inline void at76_iwevent_bss_connect(struct net_device *netdev,
++ u8 *bssid)
++{
++ union iwreq_data wrqu;
++ wrqu.data.length = 0;
++ wrqu.data.flags = 0;
++ memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
++ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
++ wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
++ at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
++ __func__);
++}
++
++static inline void at76_iwevent_bss_disconnect(struct net_device *netdev)
++{
++ union iwreq_data wrqu;
++ wrqu.data.length = 0;
++ wrqu.data.flags = 0;
++ memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
++ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
++ wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
++ at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
++ __func__);
++}
++
++#define HEX2STR_BUFFERS 4
++#define HEX2STR_MAX_LEN 64
++#define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10)
++
++/* Convert binary data into hex string */
++static char *hex2str(void *buf, int len)
++{
++ static atomic_t a = ATOMIC_INIT(0);
++ static char bufs[HEX2STR_BUFFERS][3 * HEX2STR_MAX_LEN + 1];
++ char *ret = bufs[atomic_inc_return(&a) & (HEX2STR_BUFFERS - 1)];
++ char *obuf = ret;
++ u8 *ibuf = buf;
++
++ if (len > HEX2STR_MAX_LEN)
++ len = HEX2STR_MAX_LEN;
++
++ if (len <= 0) {
++ ret[0] = '\0';
++ return ret;
++ }
++
++ while (len--) {
++ *obuf++ = BIN2HEX(*ibuf >> 4);
++ *obuf++ = BIN2HEX(*ibuf & 0xf);
++ *obuf++ = '-';
++ ibuf++;
++ }
++ *(--obuf) = '\0';
++
++ return ret;
++}
++
++#define MAC2STR_BUFFERS 4
++
++static inline char *mac2str(u8 *mac)
++{
++ static atomic_t a = ATOMIC_INIT(0);
++ static char bufs[MAC2STR_BUFFERS][6 * 3];
++ char *str;
++
++ str = bufs[atomic_inc_return(&a) & (MAC2STR_BUFFERS - 1)];
++ sprintf(str, "%02x:%02x:%02x:%02x:%02x:%02x",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++ return str;
++}
++
++/* LED trigger */
++static int tx_activity;
++static void at76_ledtrig_tx_timerfunc(unsigned long data);
++static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc, 0, 0);
++DEFINE_LED_TRIGGER(ledtrig_tx);
++
++static void at76_ledtrig_tx_timerfunc(unsigned long data)
++{
++ static int tx_lastactivity;
++
++ if (tx_lastactivity != tx_activity) {
++ tx_lastactivity = tx_activity;
++ led_trigger_event(ledtrig_tx, LED_FULL);
++ mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
++ } else
++ led_trigger_event(ledtrig_tx, LED_OFF);
++}
++
++static void at76_ledtrig_tx_activity(void)
++{
++ tx_activity++;
++ if (!timer_pending(&ledtrig_tx_timer))
++ mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
++}
++
++/* Check if the given ssid is hidden */
++static inline int at76_is_hidden_ssid(u8 *ssid, int length)
++{
++ static const u8 zeros[32];
++
++ if (length == 0)
++ return 1;
++
++ if (length == 1 && ssid[0] == ' ')
++ return 1;
++
++ return (memcmp(ssid, zeros, length) == 0);
++}
++
++static inline void at76_free_bss_list(struct at76_priv *priv)
++{
++ struct list_head *next, *ptr;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->bss_list_spinlock, flags);
++
++ priv->curr_bss = NULL;
++
++ list_for_each_safe(ptr, next, &priv->bss_list) {
++ list_del(ptr);
++ kfree(list_entry(ptr, struct bss_info, list));
++ }
++
++ spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++}
++
++static int at76_remap(struct usb_device *udev)
++{
++ int ret;
++ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
++ USB_TYPE_VENDOR | USB_DIR_OUT |
++ USB_RECIP_INTERFACE, 0, 0, NULL, 0,
++ USB_CTRL_GET_TIMEOUT);
++ if (ret < 0)
++ return ret;
++ return 0;
++}
++
++static int at76_get_op_mode(struct usb_device *udev)
++{
++ int ret;
++ u8 op_mode;
++
++ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
++ USB_TYPE_VENDOR | USB_DIR_IN |
++ USB_RECIP_INTERFACE, 0x01, 0, &op_mode, 1,
++ USB_CTRL_GET_TIMEOUT);
++ if (ret < 0)
++ return ret;
++ else if (ret < 1)
++ return -EIO;
++ else
++ return op_mode;
++}
++
++/* Load a block of the second ("external") part of the firmware */
++static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
++ void *block, int size)
++{
++ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
++ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++ 0x0802, blockno, block, size,
++ USB_CTRL_GET_TIMEOUT);
++}
++
++static inline int at76_get_hw_cfg(struct usb_device *udev,
++ union at76_hwcfg *buf, int buf_size)
++{
++ return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
++ USB_TYPE_VENDOR | USB_DIR_IN |
++ USB_RECIP_INTERFACE, 0x0a02, 0,
++ buf, buf_size, USB_CTRL_GET_TIMEOUT);
++}
++
++/* Intersil boards use a different "value" for GetHWConfig requests */
++static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
++ union at76_hwcfg *buf, int buf_size)
++{
++ return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
++ USB_TYPE_VENDOR | USB_DIR_IN |
++ USB_RECIP_INTERFACE, 0x0902, 0,
++ buf, buf_size, USB_CTRL_GET_TIMEOUT);
++}
++
++/* Get the hardware configuration for the adapter and put it to the appropriate
++ * fields of 'priv' (the GetHWConfig request and interpretation of the result
++ * depends on the board type) */
++static int at76_get_hw_config(struct at76_priv *priv)
++{
++ int ret;
++ union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
++
++ if (!hwcfg)
++ return -ENOMEM;
++
++ if (at76_is_intersil(priv->board_type)) {
++ ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
++ sizeof(hwcfg->i));
++ if (ret < 0)
++ goto exit;
++ memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
++ priv->regulatory_domain = hwcfg->i.regulatory_domain;
++ } else if (at76_is_503rfmd(priv->board_type)) {
++ ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
++ if (ret < 0)
++ goto exit;
++ memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
++ priv->regulatory_domain = hwcfg->r3.regulatory_domain;
++ } else {
++ ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
++ if (ret < 0)
++ goto exit;
++ memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
++ priv->regulatory_domain = hwcfg->r5.regulatory_domain;
++ }
++
++exit:
++ kfree(hwcfg);
++ if (ret < 0)
++ printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static struct reg_domain const *at76_get_reg_domain(u16 code)
++{
++ int i;
++ static struct reg_domain const fd_tab[] = {
++ {0x10, "FCC (USA)", 0x7ff}, /* ch 1-11 */
++ {0x20, "IC (Canada)", 0x7ff}, /* ch 1-11 */
++ {0x30, "ETSI (most of Europe)", 0x1fff}, /* ch 1-13 */
++ {0x31, "Spain", 0x600}, /* ch 10-11 */
++ {0x32, "France", 0x1e00}, /* ch 10-13 */
++ {0x40, "MKK (Japan)", 0x2000}, /* ch 14 */
++ {0x41, "MKK1 (Japan)", 0x3fff}, /* ch 1-14 */
++ {0x50, "Israel", 0x3fc}, /* ch 3-9 */
++ {0x00, "<unknown>", 0xffffffff} /* ch 1-32 */
++ };
++
++ /* Last entry is fallback for unknown domain code */
++ for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
++ if (code == fd_tab[i].code)
++ break;
++
++ return &fd_tab[i];
++}
++
++static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
++ int buf_size)
++{
++ int ret;
++
++ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
++ USB_TYPE_VENDOR | USB_DIR_IN |
++ USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
++ USB_CTRL_GET_TIMEOUT);
++ if (ret >= 0 && ret != buf_size)
++ return -EIO;
++ return ret;
++}
++
++/* Return positive number for status, negative for an error */
++static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
++{
++ u8 stat_buf[40];
++ int ret;
++
++ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
++ USB_TYPE_VENDOR | USB_DIR_IN |
++ USB_RECIP_INTERFACE, cmd, 0, stat_buf,
++ sizeof(stat_buf), USB_CTRL_GET_TIMEOUT);
++ if (ret < 0)
++ return ret;
++
++ return stat_buf[5];
++}
++
++static int at76_set_card_command(struct usb_device *udev, int cmd, void *buf,
++ int buf_size)
++{
++ int ret;
++ struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
++ buf_size, GFP_KERNEL);
++
++ if (!cmd_buf)
++ return -ENOMEM;
++
++ cmd_buf->cmd = cmd;
++ cmd_buf->reserved = 0;
++ cmd_buf->size = cpu_to_le16(buf_size);
++ memcpy(cmd_buf->data, buf, buf_size);
++
++ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
++ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
++ 0, 0, cmd_buf,
++ sizeof(struct at76_command) + buf_size,
++ USB_CTRL_GET_TIMEOUT);
++ kfree(cmd_buf);
++ return ret;
++}
++
++#define MAKE_CMD_STATUS_CASE(c) case (c): return #c
++static const char *at76_get_cmd_status_string(u8 cmd_status)
++{
++ switch (cmd_status) {
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
++ MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
++ }
++
++ return "UNKNOWN";
++}
++
++/* Wait until the command is completed */
++static int at76_wait_completion(struct at76_priv *priv, int cmd)
++{
++ int status = 0;
++ unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
++
++ do {
++ status = at76_get_cmd_status(priv->udev, cmd);
++ if (status < 0) {
++ printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
++ priv->netdev->name, status);
++ break;
++ }
++
++ at76_dbg(DBG_WAIT_COMPLETE,
++ "%s: Waiting on cmd %d, status = %d (%s)",
++ priv->netdev->name, cmd, status,
++ at76_get_cmd_status_string(status));
++
++ if (status != CMD_STATUS_IN_PROGRESS
++ && status != CMD_STATUS_IDLE)
++ break;
++
++ schedule_timeout_interruptible(HZ / 10); /* 100 ms */
++ if (time_after(jiffies, timeout)) {
++ printk(KERN_ERR
++ "%s: completion timeout for command %d\n",
++ priv->netdev->name, cmd);
++ status = -ETIMEDOUT;
++ break;
++ }
++ } while (1);
++
++ return status;
++}
++
++static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
++{
++ int ret;
++
++ ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
++ offsetof(struct set_mib_buffer,
++ data) + buf->size);
++ if (ret < 0)
++ return ret;
++
++ ret = at76_wait_completion(priv, CMD_SET_MIB);
++ if (ret != CMD_STATUS_COMPLETE) {
++ printk(KERN_INFO
++ "%s: set_mib: at76_wait_completion failed "
++ "with %d\n", priv->netdev->name, ret);
++ ret = -EIO;
++ }
++
++ return ret;
++}
++
++/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
++static int at76_set_radio(struct at76_priv *priv, int enable)
++{
++ int ret;
++ int cmd;
++
++ if (priv->radio_on == enable)
++ return 0;
++
++ cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
++
++ ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
++ if (ret < 0)
++ printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
++ priv->netdev->name, cmd, ret);
++ else
++ ret = 1;
++
++ priv->radio_on = enable;
++ return ret;
++}
++
++/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
++static int at76_set_pm_mode(struct at76_priv *priv)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_MAC_MGMT;
++ priv->mib_buf.size = 1;
++ priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
++ priv->mib_buf.data.byte = priv->pm_mode;
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++/* Set the association id for power save mode */
++static int at76_set_associd(struct at76_priv *priv, u16 id)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_MAC_MGMT;
++ priv->mib_buf.size = 2;
++ priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id);
++ priv->mib_buf.data.word = cpu_to_le16(id);
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (associd) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++/* Set the listen interval for power save mode */
++static int at76_set_listen_interval(struct at76_priv *priv, u16 interval)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_MAC;
++ priv->mib_buf.size = 2;
++ priv->mib_buf.index = offsetof(struct mib_mac, listen_interval);
++ priv->mib_buf.data.word = cpu_to_le16(interval);
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR
++ "%s: set_mib (listen_interval) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static int at76_set_preamble(struct at76_priv *priv, u8 type)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_LOCAL;
++ priv->mib_buf.size = 1;
++ priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
++ priv->mib_buf.data.byte = type;
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static int at76_set_frag(struct at76_priv *priv, u16 size)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_MAC;
++ priv->mib_buf.size = 2;
++ priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
++ priv->mib_buf.data.word = cpu_to_le16(size);
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static int at76_set_rts(struct at76_priv *priv, u16 size)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_MAC;
++ priv->mib_buf.size = 2;
++ priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
++ priv->mib_buf.data.word = cpu_to_le16(size);
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_LOCAL;
++ priv->mib_buf.size = 1;
++ priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
++ priv->mib_buf.data.byte = onoff;
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static int at76_add_mac_address(struct at76_priv *priv, void *addr)
++{
++ int ret = 0;
++
++ priv->mib_buf.type = MIB_MAC_ADDR;
++ priv->mib_buf.size = ETH_ALEN;
++ priv->mib_buf.index = offsetof(struct mib_mac_addr, mac_addr);
++ memcpy(priv->mib_buf.data.addr, addr, ETH_ALEN);
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n",
++ priv->netdev->name, ret);
++
++ return ret;
++}
++
++static void at76_dump_mib_mac_addr(struct at76_priv *priv)
++{
++ int i;
++ int ret;
++ struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
++ GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
++ sizeof(struct mib_mac_addr));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x",
++ priv->netdev->name,
++ mac2str(m->mac_addr), m->res[0], m->res[1]);
++ for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
++ at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, "
++ "status %d", priv->netdev->name, i,
++ mac2str(m->group_addr[i]), m->group_addr_status[i]);
++exit:
++ kfree(m);
++}
++
++static void at76_dump_mib_mac_wep(struct at76_priv *priv)
++{
++ int i;
++ int ret;
++ int key_len;
++ struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
++ sizeof(struct mib_mac_wep));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
++ "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
++ "encr_level %u key %d", priv->netdev->name,
++ m->privacy_invoked, m->wep_default_key_id,
++ m->wep_key_mapping_len, m->exclude_unencrypted,
++ le32_to_cpu(m->wep_icv_error_count),
++ le32_to_cpu(m->wep_excluded_count), m->encryption_level,
++ m->wep_default_key_id);
++
++ key_len = (m->encryption_level == 1) ?
++ WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
++
++ for (i = 0; i < WEP_KEYS; i++)
++ at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s",
++ priv->netdev->name, i,
++ hex2str(m->wep_default_keyvalue[i], key_len));
++exit:
++ kfree(m);
++}
++
++static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
++{
++ int ret;
++ struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
++ GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
++ sizeof(struct mib_mac_mgmt));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
++ "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
++ "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
++ "current_bssid %s current_essid %s current_bss_type %d "
++ "pm_mode %d ibss_change %d res %d "
++ "multi_domain_capability_implemented %d "
++ "international_roaming %d country_string %.3s",
++ priv->netdev->name, le16_to_cpu(m->beacon_period),
++ le16_to_cpu(m->CFP_max_duration),
++ le16_to_cpu(m->medium_occupancy_limit),
++ le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
++ m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
++ m->CFP_period, mac2str(m->current_bssid),
++ hex2str(m->current_essid, IW_ESSID_MAX_SIZE),
++ m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
++ m->res, m->multi_domain_capability_implemented,
++ m->multi_domain_capability_enabled, m->country_string);
++exit:
++ kfree(m);
++}
++
++static void at76_dump_mib_mac(struct at76_priv *priv)
++{
++ int ret;
++ struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
++ "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
++ "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
++ "scan_type %d scan_channel %d probe_delay %u "
++ "min_channel_time %d max_channel_time %d listen_int %d "
++ "desired_ssid %s desired_bssid %s desired_bsstype %d",
++ priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime),
++ le32_to_cpu(m->max_rx_lifetime),
++ le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
++ le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
++ m->short_retry_time, m->long_retry_time, m->scan_type,
++ m->scan_channel, le16_to_cpu(m->probe_delay),
++ le16_to_cpu(m->min_channel_time),
++ le16_to_cpu(m->max_channel_time),
++ le16_to_cpu(m->listen_interval),
++ hex2str(m->desired_ssid, IW_ESSID_MAX_SIZE),
++ mac2str(m->desired_bssid), m->desired_bsstype);
++exit:
++ kfree(m);
++}
++
++static void at76_dump_mib_phy(struct at76_priv *priv)
++{
++ int ret;
++ struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
++ "sifs_time %d preamble_length %d plcp_header_length %d "
++ "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
++ "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
++ "phy_type %d current_reg_domain %d",
++ priv->netdev->name, le32_to_cpu(m->ed_threshold),
++ le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
++ le16_to_cpu(m->preamble_length),
++ le16_to_cpu(m->plcp_header_length),
++ le16_to_cpu(m->mpdu_max_length),
++ le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
++ m->operation_rate_set[1], m->operation_rate_set[2],
++ m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
++ m->phy_type, m->current_reg_domain);
++exit:
++ kfree(m);
++}
++
++static void at76_dump_mib_local(struct at76_priv *priv)
++{
++ int ret;
++ struct mib_local *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
++ "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
++ "preamble_type %d", priv->netdev->name, m->beacon_enable,
++ m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
++ m->preamble_type);
++exit:
++ kfree(m);
++}
++
++static void at76_dump_mib_mdomain(struct at76_priv *priv)
++{
++ int ret;
++ struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
++
++ if (!m)
++ return;
++
++ ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
++ sizeof(struct mib_mdomain));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s",
++ priv->netdev->name,
++ hex2str(m->channel_list, sizeof(m->channel_list)));
++
++ at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s",
++ priv->netdev->name,
++ hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel)));
++exit:
++ kfree(m);
++}
++
++static int at76_get_current_bssid(struct at76_priv *priv)
++{
++ int ret = 0;
++ struct mib_mac_mgmt *mac_mgmt =
++ kmalloc(sizeof(struct mib_mac_mgmt), GFP_KERNEL);
++
++ if (!mac_mgmt) {
++ ret = -ENOMEM;
++ goto exit;
++ }
++
++ ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, mac_mgmt,
++ sizeof(struct mib_mac_mgmt));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
++ priv->netdev->name, ret);
++ goto error;
++ }
++ memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN);
++ printk(KERN_INFO "%s: using BSSID %s\n", priv->netdev->name,
++ mac2str(priv->bssid));
++error:
++ kfree(mac_mgmt);
++exit:
++ return ret;
++}
++
++static int at76_get_current_channel(struct at76_priv *priv)
++{
++ int ret = 0;
++ struct mib_phy *phy = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
++
++ if (!phy) {
++ ret = -ENOMEM;
++ goto exit;
++ }
++ ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n",
++ priv->netdev->name, ret);
++ goto error;
++ }
++ priv->channel = phy->channel_id;
++error:
++ kfree(phy);
++exit:
++ return ret;
++}
++
++/**
++ * at76_start_scan - start a scan
++ *
++ * @use_essid - use the configured ESSID in non passive mode
++ */
++static int at76_start_scan(struct at76_priv *priv, int use_essid)
++{
++ struct at76_req_scan scan;
++
++ memset(&scan, 0, sizeof(struct at76_req_scan));
++ memset(scan.bssid, 0xff, ETH_ALEN);
++
++ if (use_essid) {
++ memcpy(scan.essid, priv->essid, IW_ESSID_MAX_SIZE);
++ scan.essid_size = priv->essid_size;
++ } else
++ scan.essid_size = 0;
++
++ /* jal: why should we start at a certain channel? we do scan the whole
++ range allowed by reg domain. */
++ scan.channel = priv->channel;
++
++ /* atmelwlandriver differs between scan type 0 and 1 (active/passive)
++ For ad-hoc mode, it uses type 0 only. */
++ scan.scan_type = priv->scan_mode;
++
++ /* INFO: For probe_delay, not multiplying by 1024 as this will be
++ slightly less than min_channel_time
++ (per spec: probe delay < min. channel time) */
++ scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
++ scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
++ scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
++ scan.international_scan = 0;
++
++ /* other values are set to 0 for type 0 */
++
++ at76_dbg(DBG_PROGRESS, "%s: start_scan (use_essid = %d, intl = %d, "
++ "channel = %d, probe_delay = %d, scan_min_time = %d, "
++ "scan_max_time = %d)",
++ priv->netdev->name, use_essid,
++ scan.international_scan, scan.channel,
++ le16_to_cpu(scan.probe_delay),
++ le16_to_cpu(scan.min_channel_time),
++ le16_to_cpu(scan.max_channel_time));
++
++ return at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
++}
++
++/* Enable monitor mode */
++static int at76_start_monitor(struct at76_priv *priv)
++{
++ struct at76_req_scan scan;
++ int ret;
++
++ memset(&scan, 0, sizeof(struct at76_req_scan));
++ memset(scan.bssid, 0xff, ETH_ALEN);
++
++ scan.channel = priv->channel;
++ scan.scan_type = SCAN_TYPE_PASSIVE;
++ scan.international_scan = 0;
++
++ ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
++ if (ret >= 0)
++ ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
++
++ return ret;
++}
++
++static int at76_start_ibss(struct at76_priv *priv)
++{
++ struct at76_req_ibss bss;
++ int ret;
++
++ WARN_ON(priv->mac_state != MAC_OWN_IBSS);
++ if (priv->mac_state != MAC_OWN_IBSS)
++ return -EBUSY;
++
++ memset(&bss, 0, sizeof(struct at76_req_ibss));
++ memset(bss.bssid, 0xff, ETH_ALEN);
++ memcpy(bss.essid, priv->essid, IW_ESSID_MAX_SIZE);
++ bss.essid_size = priv->essid_size;
++ bss.bss_type = ADHOC_MODE;
++ bss.channel = priv->channel;
++
++ ret = at76_set_card_command(priv->udev, CMD_START_IBSS, &bss,
++ sizeof(struct at76_req_ibss));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: start_ibss failed: %d\n",
++ priv->netdev->name, ret);
++ return ret;
++ }
++
++ ret = at76_wait_completion(priv, CMD_START_IBSS);
++ if (ret != CMD_STATUS_COMPLETE) {
++ printk(KERN_ERR "%s: start_ibss failed to complete, %d\n",
++ priv->netdev->name, ret);
++ return ret;
++ }
++
++ ret = at76_get_current_bssid(priv);
++ if (ret < 0)
++ return ret;
++
++ ret = at76_get_current_channel(priv);
++ if (ret < 0)
++ return ret;
++
++ /* not sure what this is good for ??? */
++ priv->mib_buf.type = MIB_MAC_MGMT;
++ priv->mib_buf.size = 1;
++ priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change);
++ priv->mib_buf.data.byte = 0;
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0) {
++ printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n",
++ priv->netdev->name, ret);
++ return ret;
++ }
++
++ netif_carrier_on(priv->netdev);
++ netif_start_queue(priv->netdev);
++ return 0;
++}
++
++/* Request card to join BSS in managed or ad-hoc mode */
++static int at76_join_bss(struct at76_priv *priv, struct bss_info *ptr)
++{
++ struct at76_req_join join;
++
++ BUG_ON(!ptr);
++
++ memset(&join, 0, sizeof(struct at76_req_join));
++ memcpy(join.bssid, ptr->bssid, ETH_ALEN);
++ memcpy(join.essid, ptr->ssid, ptr->ssid_len);
++ join.essid_size = ptr->ssid_len;
++ join.bss_type = (priv->iw_mode == IW_MODE_ADHOC ? 1 : 2);
++ join.channel = ptr->channel;
++ join.timeout = cpu_to_le16(2000);
++
++ at76_dbg(DBG_PROGRESS,
++ "%s join addr %s ssid %s type %d ch %d timeout %d",
++ priv->netdev->name, mac2str(join.bssid), join.essid,
++ join.bss_type, join.channel, le16_to_cpu(join.timeout));
++ return at76_set_card_command(priv->udev, CMD_JOIN, &join,
++ sizeof(struct at76_req_join));
++}
++
++/* Calculate padding from txbuf->wlength (which excludes the USB TX header),
++ likely to compensate a flaw in the AT76C503A USB part ... */
++static inline int at76_calc_padding(int wlen)
++{
++ /* add the USB TX header */
++ wlen += AT76_TX_HDRLEN;
++
++ wlen = wlen % 64;
++
++ if (wlen < 50)
++ return 50 - wlen;
++
++ if (wlen >= 61)
++ return 64 + 50 - wlen;
++
++ return 0;
++}
++
++/* We are doing a lot of things here in an interrupt. Need
++ a bh handler (Watching TV with a TV card is probably
++ a good test: if you see flickers, we are doing too much.
++ Currently I do see flickers... even with our tasklet :-( )
++ Maybe because the bttv driver and usb-uhci use the same interrupt
++*/
++/* Or maybe because our BH handler is preempting bttv's BH handler.. BHs don't
++ * solve everything.. (alex) */
++static void at76_rx_callback(struct urb *urb)
++{
++ struct at76_priv *priv = urb->context;
++
++ priv->rx_tasklet.data = (unsigned long)urb;
++ tasklet_schedule(&priv->rx_tasklet);
++ return;
++}
++
++static void at76_tx_callback(struct urb *urb)
++{
++ struct at76_priv *priv = urb->context;
++ struct net_device_stats *stats = &priv->stats;
++ unsigned long flags;
++ struct at76_tx_buffer *mgmt_buf;
++ int ret;
++
++ switch (urb->status) {
++ case 0:
++ stats->tx_packets++;
++ break;
++ case -ENOENT:
++ case -ECONNRESET:
++ /* urb has been unlinked */
++ return;
++ default:
++ at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
++ __func__, urb->status);
++ stats->tx_errors++;
++ break;
++ }
++
++ spin_lock_irqsave(&priv->mgmt_spinlock, flags);
++ mgmt_buf = priv->next_mgmt_bulk;
++ priv->next_mgmt_bulk = NULL;
++ spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
++
++ if (!mgmt_buf) {
++ netif_wake_queue(priv->netdev);
++ return;
++ }
++
++ /* we don't copy the padding bytes, but add them
++ to the length */
++ memcpy(priv->bulk_out_buffer, mgmt_buf,
++ le16_to_cpu(mgmt_buf->wlength) + AT76_TX_HDRLEN);
++ usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe,
++ priv->bulk_out_buffer,
++ le16_to_cpu(mgmt_buf->wlength) + mgmt_buf->padding +
++ AT76_TX_HDRLEN, at76_tx_callback, priv);
++ ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
++ if (ret)
++ printk(KERN_ERR "%s: error in tx submit urb: %d\n",
++ priv->netdev->name, ret);
++
++ kfree(mgmt_buf);
++}
++
++/* Send a management frame on bulk-out. txbuf->wlength must be set */
++static int at76_tx_mgmt(struct at76_priv *priv, struct at76_tx_buffer *txbuf)
++{
++ unsigned long flags;
++ int ret;
++ int urb_status;
++ void *oldbuf = NULL;
++
++ netif_carrier_off(priv->netdev); /* stop netdev watchdog */
++ netif_stop_queue(priv->netdev); /* stop tx data packets */
++
++ spin_lock_irqsave(&priv->mgmt_spinlock, flags);
++
++ urb_status = priv->tx_urb->status;
++ if (urb_status == -EINPROGRESS) {
++ /* cannot transmit now, put in the queue */
++ oldbuf = priv->next_mgmt_bulk;
++ priv->next_mgmt_bulk = txbuf;
++ }
++ spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
++
++ if (oldbuf) {
++ /* a data/mgmt tx is already pending in the URB -
++ if this is no error in some situations we must
++ implement a queue or silently modify the old msg */
++ printk(KERN_ERR "%s: removed pending mgmt buffer %s\n",
++ priv->netdev->name, hex2str(oldbuf, 64));
++ kfree(oldbuf);
++ return 0;
++ }
++
++ txbuf->tx_rate = TX_RATE_1MBIT;
++ txbuf->padding = at76_calc_padding(le16_to_cpu(txbuf->wlength));
++ memset(txbuf->reserved, 0, sizeof(txbuf->reserved));
++
++ if (priv->next_mgmt_bulk)
++ printk(KERN_ERR "%s: URB status %d, but mgmt is pending\n",
++ priv->netdev->name, urb_status);
++
++ at76_dbg(DBG_TX_MGMT,
++ "%s: tx mgmt: wlen %d tx_rate %d pad %d %s",
++ priv->netdev->name, le16_to_cpu(txbuf->wlength),
++ txbuf->tx_rate, txbuf->padding,
++ hex2str(txbuf->packet, le16_to_cpu(txbuf->wlength)));
++
++ /* txbuf was not consumed above -> send mgmt msg immediately */
++ memcpy(priv->bulk_out_buffer, txbuf,
++ le16_to_cpu(txbuf->wlength) + AT76_TX_HDRLEN);
++ usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe,
++ priv->bulk_out_buffer,
++ le16_to_cpu(txbuf->wlength) + txbuf->padding +
++ AT76_TX_HDRLEN, at76_tx_callback, priv);
++ ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
++ if (ret)
++ printk(KERN_ERR "%s: error in tx submit urb: %d\n",
++ priv->netdev->name, ret);
++
++ kfree(txbuf);
++
++ return ret;
++}
++
++/* Go to the next information element */
++static inline void next_ie(struct ieee80211_info_element **ie)
++{
++ *ie = (struct ieee80211_info_element *)(&(*ie)->data[(*ie)->len]);
++}
++
++/* Challenge is the challenge string (in TLV format)
++ we got with seq_nr 2 for shared secret authentication only and
++ send in seq_nr 3 WEP encrypted to prove we have the correct WEP key;
++ otherwise it is NULL */
++static int at76_auth_req(struct at76_priv *priv, struct bss_info *bss,
++ int seq_nr, struct ieee80211_info_element *challenge)
++{
++ struct at76_tx_buffer *tx_buffer;
++ struct ieee80211_hdr_3addr *mgmt;
++ struct ieee80211_auth *req;
++ int buf_len = (seq_nr != 3 ? AUTH_FRAME_SIZE :
++ AUTH_FRAME_SIZE + 1 + 1 + challenge->len);
++
++ BUG_ON(!bss);
++ BUG_ON(seq_nr == 3 && !challenge);
++ tx_buffer = kmalloc(buf_len + MAX_PADDING_SIZE, GFP_ATOMIC);
++ if (!tx_buffer)
++ return -ENOMEM;
++
++ req = (struct ieee80211_auth *)tx_buffer->packet;
++ mgmt = &req->header;
++
++ /* make wireless header */
++ /* first auth msg is not encrypted, only the second (seq_nr == 3) */
++ mgmt->frame_ctl =
++ cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH |
++ (seq_nr == 3 ? IEEE80211_FCTL_PROTECTED : 0));
++
++ mgmt->duration_id = cpu_to_le16(0x8000);
++ memcpy(mgmt->addr1, bss->bssid, ETH_ALEN);
++ memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN);
++ memcpy(mgmt->addr3, bss->bssid, ETH_ALEN);
++ mgmt->seq_ctl = cpu_to_le16(0);
++
++ req->algorithm = cpu_to_le16(priv->auth_mode);
++ req->transaction = cpu_to_le16(seq_nr);
++ req->status = cpu_to_le16(0);
++
++ if (seq_nr == 3)
++ memcpy(req->info_element, challenge, 1 + 1 + challenge->len);
++
++ /* init. at76_priv tx header */
++ tx_buffer->wlength = cpu_to_le16(buf_len - AT76_TX_HDRLEN);
++ at76_dbg(DBG_TX_MGMT, "%s: AuthReq bssid %s alg %d seq_nr %d",
++ priv->netdev->name, mac2str(mgmt->addr3),
++ le16_to_cpu(req->algorithm), le16_to_cpu(req->transaction));
++ if (seq_nr == 3)
++ at76_dbg(DBG_TX_MGMT, "%s: AuthReq challenge: %s ...",
++ priv->netdev->name, hex2str(req->info_element, 18));
++
++ /* either send immediately (if no data tx is pending
++ or put it in pending list */
++ return at76_tx_mgmt(priv, tx_buffer);
++}
++
++static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss)
++{
++ struct at76_tx_buffer *tx_buffer;
++ struct ieee80211_hdr_3addr *mgmt;
++ struct ieee80211_assoc_request *req;
++ struct ieee80211_info_element *ie;
++ char *essid;
++ int essid_len;
++ u16 capa;
++
++ BUG_ON(!bss);
++
++ tx_buffer = kmalloc(ASSOCREQ_MAX_SIZE + MAX_PADDING_SIZE, GFP_ATOMIC);
++ if (!tx_buffer)
++ return -ENOMEM;
++
++ req = (struct ieee80211_assoc_request *)tx_buffer->packet;
++ mgmt = &req->header;
++ ie = req->info_element;
++
++ /* make wireless header */
++ mgmt->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT |
++ IEEE80211_STYPE_ASSOC_REQ);
++
++ mgmt->duration_id = cpu_to_le16(0x8000);
++ memcpy(mgmt->addr1, bss->bssid, ETH_ALEN);
++ memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN);
++ memcpy(mgmt->addr3, bss->bssid, ETH_ALEN);
++ mgmt->seq_ctl = cpu_to_le16(0);
++
++ /* we must set the Privacy bit in the capabilities to assure an
++ Agere-based AP with optional WEP transmits encrypted frames
++ to us. AP only set the Privacy bit in their capabilities
++ if WEP is mandatory in the BSS! */
++ capa = bss->capa;
++ if (priv->wep_enabled)
++ capa |= WLAN_CAPABILITY_PRIVACY;
++ if (priv->preamble_type != PREAMBLE_TYPE_LONG)
++ capa |= WLAN_CAPABILITY_SHORT_PREAMBLE;
++ req->capability = cpu_to_le16(capa);
++
++ req->listen_interval = cpu_to_le16(2 * bss->beacon_interval);
++
++ /* write TLV data elements */
++
++ ie->id = MFIE_TYPE_SSID;
++ ie->len = bss->ssid_len;
++ memcpy(ie->data, bss->ssid, bss->ssid_len);
++ next_ie(&ie);
++
++ ie->id = MFIE_TYPE_RATES;
++ ie->len = sizeof(hw_rates);
++ memcpy(ie->data, hw_rates, sizeof(hw_rates));
++ next_ie(&ie); /* ie points behind the supp_rates field */
++
++ /* init. at76_priv tx header */
++ tx_buffer->wlength = cpu_to_le16((u8 *)ie - (u8 *)mgmt);
++
++ ie = req->info_element;
++ essid = ie->data;
++ essid_len = min_t(int, IW_ESSID_MAX_SIZE, ie->len);
++
++ next_ie(&ie); /* points to IE of rates now */
++ at76_dbg(DBG_TX_MGMT,
++ "%s: AssocReq bssid %s capa 0x%04x ssid %.*s rates %s",
++ priv->netdev->name, mac2str(mgmt->addr3),
++ le16_to_cpu(req->capability), essid_len, essid,
++ hex2str(ie->data, ie->len));
++
++ /* either send immediately (if no data tx is pending
++ or put it in pending list */
++ return at76_tx_mgmt(priv, tx_buffer);
++}
++
++/* We got to check the bss_list for old entries */
++static void at76_bss_list_timeout(unsigned long par)
++{
++ struct at76_priv *priv = (struct at76_priv *)par;
++ unsigned long flags;
++ struct list_head *lptr, *nptr;
++ struct bss_info *ptr;
++
++ spin_lock_irqsave(&priv->bss_list_spinlock, flags);
++
++ list_for_each_safe(lptr, nptr, &priv->bss_list) {
++
++ ptr = list_entry(lptr, struct bss_info, list);
++
++ if (ptr != priv->curr_bss
++ && time_after(jiffies, ptr->last_rx + BSS_LIST_TIMEOUT)) {
++ at76_dbg(DBG_BSS_TABLE_RM,
++ "%s: bss_list: removing old BSS %s ch %d",
++ priv->netdev->name, mac2str(ptr->bssid),
++ ptr->channel);
++ list_del(&ptr->list);
++ kfree(ptr);
++ }
++ }
++ spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++ /* restart the timer */
++ mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT);
++}
++
++static inline void at76_set_mac_state(struct at76_priv *priv,
++ enum mac_state mac_state)
++{
++ at76_dbg(DBG_MAC_STATE, "%s state: %s", priv->netdev->name,
++ mac_states[mac_state]);
++ priv->mac_state = mac_state;
++}
++
++static void at76_dump_bss_table(struct at76_priv *priv)
++{
++ struct bss_info *ptr;
++ unsigned long flags;
++ struct list_head *lptr;
++
++ spin_lock_irqsave(&priv->bss_list_spinlock, flags);
++
++ at76_dbg(DBG_BSS_TABLE, "%s BSS table (curr=%p):", priv->netdev->name,
++ priv->curr_bss);
++
++ list_for_each(lptr, &priv->bss_list) {
++ ptr = list_entry(lptr, struct bss_info, list);
++ at76_dbg(DBG_BSS_TABLE, "0x%p: bssid %s channel %d ssid %.*s "
++ "(%s) capa 0x%04x rates %s rssi %d link %d noise %d",
++ ptr, mac2str(ptr->bssid), ptr->channel, ptr->ssid_len,
++ ptr->ssid, hex2str(ptr->ssid, ptr->ssid_len),
++ ptr->capa, hex2str(ptr->rates, ptr->rates_len),
++ ptr->rssi, ptr->link_qual, ptr->noise_level);
++ }
++ spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++}
++
++/* Called upon successful association to mark interface as connected */
++static void at76_work_assoc_done(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ work_assoc_done);
++
++ mutex_lock(&priv->mtx);
++
++ WARN_ON(priv->mac_state != MAC_ASSOC);
++ WARN_ON(!priv->curr_bss);
++ if (priv->mac_state != MAC_ASSOC || !priv->curr_bss)
++ goto exit;
++
++ if (priv->iw_mode == IW_MODE_INFRA) {
++ if (priv->pm_mode != AT76_PM_OFF) {
++ /* calculate the listen interval in units of
++ beacon intervals of the curr_bss */
++ u32 pm_period_beacon = (priv->pm_period >> 10) /
++ priv->curr_bss->beacon_interval;
++
++ pm_period_beacon = max(pm_period_beacon, 2u);
++ pm_period_beacon = min(pm_period_beacon, 0xffffu);
++
++ at76_dbg(DBG_PM,
++ "%s: pm_mode %d assoc id 0x%x listen int %d",
++ priv->netdev->name, priv->pm_mode,
++ priv->assoc_id, pm_period_beacon);
++
++ at76_set_associd(priv, priv->assoc_id);
++ at76_set_listen_interval(priv, (u16)pm_period_beacon);
++ }
++ schedule_delayed_work(&priv->dwork_beacon, BEACON_TIMEOUT);
++ }
++ at76_set_pm_mode(priv);
++
++ netif_carrier_on(priv->netdev);
++ netif_wake_queue(priv->netdev);
++ at76_set_mac_state(priv, MAC_CONNECTED);
++ at76_iwevent_bss_connect(priv->netdev, priv->curr_bss->bssid);
++ at76_dbg(DBG_PROGRESS, "%s: connected to BSSID %s",
++ priv->netdev->name, mac2str(priv->curr_bss->bssid));
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* We only store the new mac address in netdev struct,
++ it gets set when the netdev is opened. */
++static int at76_set_mac_address(struct net_device *netdev, void *addr)
++{
++ struct sockaddr *mac = addr;
++ memcpy(netdev->dev_addr, mac->sa_data, ETH_ALEN);
++ return 1;
++}
++
++static struct net_device_stats *at76_get_stats(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ return &priv->stats;
++}
++
++static struct iw_statistics *at76_get_wireless_stats(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL, "RETURN qual %d level %d noise %d updated %d",
++ priv->wstats.qual.qual, priv->wstats.qual.level,
++ priv->wstats.qual.noise, priv->wstats.qual.updated);
++
++ return &priv->wstats;
++}
++
++static void at76_set_multicast(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int promisc;
++
++ promisc = ((netdev->flags & IFF_PROMISC) != 0);
++ if (promisc != priv->promisc) {
++ /* This gets called in interrupt, must reschedule */
++ priv->promisc = promisc;
++ schedule_work(&priv->work_set_promisc);
++ }
++}
++
++/* Stop all network activity, flush all pending tasks */
++static void at76_quiesce(struct at76_priv *priv)
++{
++ unsigned long flags;
++
++ netif_stop_queue(priv->netdev);
++ netif_carrier_off(priv->netdev);
++
++ at76_set_mac_state(priv, MAC_INIT);
++
++ cancel_delayed_work(&priv->dwork_get_scan);
++ cancel_delayed_work(&priv->dwork_beacon);
++ cancel_delayed_work(&priv->dwork_auth);
++ cancel_delayed_work(&priv->dwork_assoc);
++ cancel_delayed_work(&priv->dwork_restart);
++
++ spin_lock_irqsave(&priv->mgmt_spinlock, flags);
++ kfree(priv->next_mgmt_bulk);
++ priv->next_mgmt_bulk = NULL;
++ spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
++}
++
++/*******************************************************************************
++ * at76_priv implementations of iw_handler functions:
++ */
++static int at76_iw_handler_commit(struct net_device *netdev,
++ struct iw_request_info *info,
++ void *null, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL, "%s %s: restarting the device", netdev->name,
++ __func__);
++
++ if (priv->mac_state != MAC_INIT)
++ at76_quiesce(priv);
++
++ /* Wait half second before the restart to process subsequent
++ * requests from the same iwconfig in a single restart */
++ schedule_delayed_work(&priv->dwork_restart, HZ / 2);
++
++ return 0;
++}
++
++static int at76_iw_handler_get_name(struct net_device *netdev,
++ struct iw_request_info *info,
++ char *name, char *extra)
++{
++ strcpy(name, "IEEE 802.11b");
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWNAME - name %s", netdev->name, name);
++ return 0;
++}
++
++static int at76_iw_handler_set_freq(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_freq *freq, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int chan = -1;
++ int ret = -EIWCOMMIT;
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - freq.m %d freq.e %d",
++ netdev->name, freq->m, freq->e);
++
++ if ((freq->e == 0) && (freq->m <= 1000))
++ /* Setting by channel number */
++ chan = freq->m;
++ else {
++ /* Setting by frequency - search the table */
++ int mult = 1;
++ int i;
++
++ for (i = 0; i < (6 - freq->e); i++)
++ mult *= 10;
++
++ for (i = 0; i < NUM_CHANNELS; i++) {
++ if (freq->m == (channel_frequency[i] * mult))
++ chan = i + 1;
++ }
++ }
++
++ if (chan < 1 || !priv->domain)
++ /* non-positive channels are invalid
++ * we need a domain info to set the channel
++ * either that or an invalid frequency was
++ * provided by the user */
++ ret = -EINVAL;
++ else if (!(priv->domain->channel_map & (1 << (chan - 1)))) {
++ printk(KERN_INFO "%s: channel %d not allowed for domain %s\n",
++ priv->netdev->name, chan, priv->domain->name);
++ ret = -EINVAL;
++ }
++
++ if (ret == -EIWCOMMIT) {
++ priv->channel = chan;
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - ch %d", netdev->name,
++ chan);
++ }
++
++ return ret;
++}
++
++static int at76_iw_handler_get_freq(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_freq *freq, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ freq->m = priv->channel;
++ freq->e = 0;
++
++ if (priv->channel)
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - freq %ld x 10e%d",
++ netdev->name, channel_frequency[priv->channel - 1], 6);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - ch %d", netdev->name,
++ priv->channel);
++
++ return 0;
++}
++
++static int at76_iw_handler_set_mode(struct net_device *netdev,
++ struct iw_request_info *info,
++ __u32 *mode, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWMODE - %d", netdev->name, *mode);
++
++ if ((*mode != IW_MODE_ADHOC) && (*mode != IW_MODE_INFRA) &&
++ (*mode != IW_MODE_MONITOR))
++ return -EINVAL;
++
++ priv->iw_mode = *mode;
++ if (priv->iw_mode != IW_MODE_INFRA)
++ priv->pm_mode = AT76_PM_OFF;
++
++ return -EIWCOMMIT;
++}
++
++static int at76_iw_handler_get_mode(struct net_device *netdev,
++ struct iw_request_info *info,
++ __u32 *mode, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ *mode = priv->iw_mode;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWMODE - %d", netdev->name, *mode);
++
++ return 0;
++}
++
++static int at76_iw_handler_get_range(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ /* inspired by atmel.c */
++ struct at76_priv *priv = netdev_priv(netdev);
++ struct iw_range *range = (struct iw_range *)extra;
++ int i;
++
++ data->length = sizeof(struct iw_range);
++ memset(range, 0, sizeof(struct iw_range));
++
++ /* TODO: range->throughput = xxxxxx; */
++
++ range->min_nwid = 0x0000;
++ range->max_nwid = 0x0000;
++
++ /* this driver doesn't maintain sensitivity information */
++ range->sensitivity = 0;
++
++ range->max_qual.qual = 100;
++ range->max_qual.level = 100;
++ range->max_qual.noise = 0;
++ range->max_qual.updated = IW_QUAL_NOISE_INVALID;
++
++ range->avg_qual.qual = 50;
++ range->avg_qual.level = 50;
++ range->avg_qual.noise = 0;
++ range->avg_qual.updated = IW_QUAL_NOISE_INVALID;
++
++ range->bitrate[0] = 1000000;
++ range->bitrate[1] = 2000000;
++ range->bitrate[2] = 5500000;
++ range->bitrate[3] = 11000000;
++ range->num_bitrates = 4;
++
++ range->min_rts = 0;
++ range->max_rts = MAX_RTS_THRESHOLD;
++
++ range->min_frag = MIN_FRAG_THRESHOLD;
++ range->max_frag = MAX_FRAG_THRESHOLD;
++
++ range->pmp_flags = IW_POWER_PERIOD;
++ range->pmt_flags = IW_POWER_ON;
++ range->pm_capa = IW_POWER_PERIOD | IW_POWER_ALL_R;
++
++ range->encoding_size[0] = WEP_SMALL_KEY_LEN;
++ range->encoding_size[1] = WEP_LARGE_KEY_LEN;
++ range->num_encoding_sizes = 2;
++ range->max_encoding_tokens = WEP_KEYS;
++
++ /* both WL-240U and Linksys WUSB11 v2.6 specify 15 dBm as output power
++ - take this for all (ignore antenna gains) */
++ range->txpower[0] = 15;
++ range->num_txpower = 1;
++ range->txpower_capa = IW_TXPOW_DBM;
++
++ range->we_version_source = WIRELESS_EXT;
++ range->we_version_compiled = WIRELESS_EXT;
++
++ /* same as the values used in atmel.c */
++ range->retry_capa = IW_RETRY_LIMIT;
++ range->retry_flags = IW_RETRY_LIMIT;
++ range->r_time_flags = 0;
++ range->min_retry = 1;
++ range->max_retry = 255;
++
++ range->num_channels = NUM_CHANNELS;
++ range->num_frequency = 0;
++
++ for (i = 0; i < NUM_CHANNELS; i++) {
++ /* test if channel map bit is raised */
++ if (priv->domain->channel_map & (0x1 << i)) {
++ range->num_frequency += 1;
++
++ range->freq[i].i = i + 1;
++ range->freq[i].m = channel_frequency[i] * 100000;
++ range->freq[i].e = 1; /* freq * 10^1 */
++ }
++ }
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWRANGE", netdev->name);
++
++ return 0;
++}
++
++static int at76_iw_handler_set_spy(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = 0;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWSPY - number of addresses %d",
++ netdev->name, data->length);
++
++ spin_lock_bh(&priv->spy_spinlock);
++ ret = iw_handler_set_spy(priv->netdev, info, (union iwreq_data *)data,
++ extra);
++ spin_unlock_bh(&priv->spy_spinlock);
++
++ return ret;
++}
++
++static int at76_iw_handler_get_spy(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = 0;
++
++ spin_lock_bh(&priv->spy_spinlock);
++ ret = iw_handler_get_spy(priv->netdev, info,
++ (union iwreq_data *)data, extra);
++ spin_unlock_bh(&priv->spy_spinlock);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWSPY - number of addresses %d",
++ netdev->name, data->length);
++
++ return ret;
++}
++
++static int at76_iw_handler_set_thrspy(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWTHRSPY - number of addresses %d)",
++ netdev->name, data->length);
++
++ spin_lock_bh(&priv->spy_spinlock);
++ ret = iw_handler_set_thrspy(netdev, info, (union iwreq_data *)data,
++ extra);
++ spin_unlock_bh(&priv->spy_spinlock);
++
++ return ret;
++}
++
++static int at76_iw_handler_get_thrspy(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret;
++
++ spin_lock_bh(&priv->spy_spinlock);
++ ret = iw_handler_get_thrspy(netdev, info, (union iwreq_data *)data,
++ extra);
++ spin_unlock_bh(&priv->spy_spinlock);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWTHRSPY - number of addresses %d)",
++ netdev->name, data->length);
++
++ return ret;
++}
++
++static int at76_iw_handler_set_wap(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct sockaddr *ap_addr, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWAP - wap/bssid %s", netdev->name,
++ mac2str(ap_addr->sa_data));
++
++ /* if the incoming address == ff:ff:ff:ff:ff:ff, the user has
++ chosen any or auto AP preference */
++ if (is_broadcast_ether_addr(ap_addr->sa_data)
++ || is_zero_ether_addr(ap_addr->sa_data))
++ priv->wanted_bssid_valid = 0;
++ else {
++ /* user wants to set a preferred AP address */
++ priv->wanted_bssid_valid = 1;
++ memcpy(priv->wanted_bssid, ap_addr->sa_data, ETH_ALEN);
++ }
++
++ return -EIWCOMMIT;
++}
++
++static int at76_iw_handler_get_wap(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct sockaddr *ap_addr, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ ap_addr->sa_family = ARPHRD_ETHER;
++ memcpy(ap_addr->sa_data, priv->bssid, ETH_ALEN);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWAP - wap/bssid %s", netdev->name,
++ mac2str(ap_addr->sa_data));
++
++ return 0;
++}
++
++static int at76_iw_handler_set_scan(struct net_device *netdev,
++ struct iw_request_info *info,
++ union iwreq_data *wrqu, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = 0;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWSCAN", netdev->name);
++
++ if (mutex_lock_interruptible(&priv->mtx))
++ return -EINTR;
++
++ if (!netif_running(netdev)) {
++ ret = -ENETDOWN;
++ goto exit;
++ }
++
++ /* jal: we don't allow "iwlist ethX scan" while we are
++ in monitor mode */
++ if (priv->iw_mode == IW_MODE_MONITOR) {
++ ret = -EBUSY;
++ goto exit;
++ }
++
++ /* Discard old scan results */
++ if ((jiffies - priv->last_scan) > (20 * HZ))
++ priv->scan_state = SCAN_IDLE;
++ priv->last_scan = jiffies;
++
++ /* Initiate a scan command */
++ if (priv->scan_state == SCAN_IN_PROGRESS) {
++ ret = -EBUSY;
++ goto exit;
++ }
++
++ priv->scan_state = SCAN_IN_PROGRESS;
++
++ at76_quiesce(priv);
++
++ /* Try to do passive or active scan if WE asks as. */
++ if (wrqu->data.length
++ && wrqu->data.length == sizeof(struct iw_scan_req)) {
++ struct iw_scan_req *req = (struct iw_scan_req *)extra;
++
++ if (req->scan_type == IW_SCAN_TYPE_PASSIVE)
++ priv->scan_mode = SCAN_TYPE_PASSIVE;
++ else if (req->scan_type == IW_SCAN_TYPE_ACTIVE)
++ priv->scan_mode = SCAN_TYPE_ACTIVE;
++
++ /* Sanity check values? */
++ if (req->min_channel_time > 0)
++ priv->scan_min_time = req->min_channel_time;
++
++ if (req->max_channel_time > 0)
++ priv->scan_max_time = req->max_channel_time;
++ }
++
++ /* change to scanning state */
++ at76_set_mac_state(priv, MAC_SCANNING);
++ schedule_work(&priv->work_start_scan);
++
++exit:
++ mutex_unlock(&priv->mtx);
++ return ret;
++}
++
++static int at76_iw_handler_get_scan(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ unsigned long flags;
++ struct list_head *lptr, *nptr;
++ struct bss_info *curr_bss;
++ struct iw_event *iwe = kmalloc(sizeof(struct iw_event), GFP_KERNEL);
++ char *curr_val, *curr_pos = extra;
++ int i;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWSCAN", netdev->name);
++
++ if (!iwe)
++ return -ENOMEM;
++
++ if (priv->scan_state != SCAN_COMPLETED)
++ /* scan not yet finished */
++ return -EAGAIN;
++
++ spin_lock_irqsave(&priv->bss_list_spinlock, flags);
++
++ list_for_each_safe(lptr, nptr, &priv->bss_list) {
++ curr_bss = list_entry(lptr, struct bss_info, list);
++
++ iwe->cmd = SIOCGIWAP;
++ iwe->u.ap_addr.sa_family = ARPHRD_ETHER;
++ memcpy(iwe->u.ap_addr.sa_data, curr_bss->bssid, 6);
++ curr_pos = iwe_stream_add_event(curr_pos,
++ extra + IW_SCAN_MAX_DATA, iwe,
++ IW_EV_ADDR_LEN);
++
++ iwe->u.data.length = curr_bss->ssid_len;
++ iwe->cmd = SIOCGIWESSID;
++ iwe->u.data.flags = 1;
++
++ curr_pos = iwe_stream_add_point(curr_pos,
++ extra + IW_SCAN_MAX_DATA, iwe,
++ curr_bss->ssid);
++
++ iwe->cmd = SIOCGIWMODE;
++ iwe->u.mode = (curr_bss->capa & WLAN_CAPABILITY_IBSS) ?
++ IW_MODE_ADHOC :
++ (curr_bss->capa & WLAN_CAPABILITY_ESS) ?
++ IW_MODE_MASTER : IW_MODE_AUTO;
++ /* IW_MODE_AUTO = 0 which I thought is
++ * the most logical value to return in this case */
++ curr_pos = iwe_stream_add_event(curr_pos,
++ extra + IW_SCAN_MAX_DATA, iwe,
++ IW_EV_UINT_LEN);
++
++ iwe->cmd = SIOCGIWFREQ;
++ iwe->u.freq.m = curr_bss->channel;
++ iwe->u.freq.e = 0;
++ curr_pos = iwe_stream_add_event(curr_pos,
++ extra + IW_SCAN_MAX_DATA, iwe,
++ IW_EV_FREQ_LEN);
++
++ iwe->cmd = SIOCGIWENCODE;
++ if (curr_bss->capa & WLAN_CAPABILITY_PRIVACY)
++ iwe->u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
++ else
++ iwe->u.data.flags = IW_ENCODE_DISABLED;
++
++ iwe->u.data.length = 0;
++ curr_pos = iwe_stream_add_point(curr_pos,
++ extra + IW_SCAN_MAX_DATA, iwe,
++ NULL);
++
++ /* Add quality statistics */
++ iwe->cmd = IWEVQUAL;
++ iwe->u.qual.noise = 0;
++ iwe->u.qual.updated =
++ IW_QUAL_NOISE_INVALID | IW_QUAL_LEVEL_UPDATED;
++ iwe->u.qual.level = (curr_bss->rssi * 100 / 42);
++ if (iwe->u.qual.level > 100)
++ iwe->u.qual.level = 100;
++ if (at76_is_intersil(priv->board_type))
++ iwe->u.qual.qual = curr_bss->link_qual;
++ else {
++ iwe->u.qual.qual = 0;
++ iwe->u.qual.updated |= IW_QUAL_QUAL_INVALID;
++ }
++ /* Add new value to event */
++ curr_pos = iwe_stream_add_event(curr_pos,
++ extra + IW_SCAN_MAX_DATA, iwe,
++ IW_EV_QUAL_LEN);
++
++ /* Rate: stuffing multiple values in a single event requires
++ * a bit more of magic - Jean II */
++ curr_val = curr_pos + IW_EV_LCP_LEN;
++
++ iwe->cmd = SIOCGIWRATE;
++ /* Those two flags are ignored... */
++ iwe->u.bitrate.fixed = 0;
++ iwe->u.bitrate.disabled = 0;
++ /* Max 8 values */
++ for (i = 0; i < curr_bss->rates_len; i++) {
++ /* Bit rate given in 500 kb/s units (+ 0x80) */
++ iwe->u.bitrate.value =
++ ((curr_bss->rates[i] & 0x7f) * 500000);
++ /* Add new value to event */
++ curr_val = iwe_stream_add_value(curr_pos, curr_val,
++ extra +
++ IW_SCAN_MAX_DATA, iwe,
++ IW_EV_PARAM_LEN);
++ }
++
++ /* Check if we added any event */
++ if ((curr_val - curr_pos) > IW_EV_LCP_LEN)
++ curr_pos = curr_val;
++
++ /* more information may be sent back using IWECUSTOM */
++
++ }
++
++ spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++
++ data->length = (curr_pos - extra);
++ data->flags = 0;
++
++ kfree(iwe);
++ return 0;
++}
++
++static int at76_iw_handler_set_essid(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWESSID - %s", netdev->name, extra);
++
++ if (data->flags) {
++ memcpy(priv->essid, extra, data->length);
++ priv->essid_size = data->length;
++ } else
++ priv->essid_size = 0; /* Use any SSID */
++
++ return -EIWCOMMIT;
++}
++
++static int at76_iw_handler_get_essid(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ if (priv->essid_size) {
++ /* not the ANY ssid in priv->essid */
++ data->flags = 1;
++ data->length = priv->essid_size;
++ memcpy(extra, priv->essid, data->length);
++ } else {
++ /* the ANY ssid was specified */
++ if (priv->mac_state == MAC_CONNECTED && priv->curr_bss) {
++ /* report the SSID we have found */
++ data->flags = 1;
++ data->length = priv->curr_bss->ssid_len;
++ memcpy(extra, priv->curr_bss->ssid, data->length);
++ } else {
++ /* report ANY back */
++ data->flags = 0;
++ data->length = 0;
++ }
++ }
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWESSID - %.*s", netdev->name,
++ data->length, extra);
++
++ return 0;
++}
++
++static int at76_iw_handler_set_rate(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *bitrate, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = -EIWCOMMIT;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWRATE - %d", netdev->name,
++ bitrate->value);
++
++ switch (bitrate->value) {
++ case -1:
++ priv->txrate = TX_RATE_AUTO;
++ break; /* auto rate */
++ case 1000000:
++ priv->txrate = TX_RATE_1MBIT;
++ break;
++ case 2000000:
++ priv->txrate = TX_RATE_2MBIT;
++ break;
++ case 5500000:
++ priv->txrate = TX_RATE_5_5MBIT;
++ break;
++ case 11000000:
++ priv->txrate = TX_RATE_11MBIT;
++ break;
++ default:
++ ret = -EINVAL;
++ }
++
++ return ret;
++}
++
++static int at76_iw_handler_get_rate(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *bitrate, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = 0;
++
++ switch (priv->txrate) {
++ /* return max rate if RATE_AUTO */
++ case TX_RATE_AUTO:
++ bitrate->value = 11000000;
++ break;
++ case TX_RATE_1MBIT:
++ bitrate->value = 1000000;
++ break;
++ case TX_RATE_2MBIT:
++ bitrate->value = 2000000;
++ break;
++ case TX_RATE_5_5MBIT:
++ bitrate->value = 5500000;
++ break;
++ case TX_RATE_11MBIT:
++ bitrate->value = 11000000;
++ break;
++ default:
++ ret = -EINVAL;
++ }
++
++ bitrate->fixed = (priv->txrate != TX_RATE_AUTO);
++ bitrate->disabled = 0;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWRATE - %d", netdev->name,
++ bitrate->value);
++
++ return ret;
++}
++
++static int at76_iw_handler_set_rts(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *rts, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = -EIWCOMMIT;
++ int rthr = rts->value;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWRTS - value %d disabled %s",
++ netdev->name, rts->value, (rts->disabled) ? "true" : "false");
++
++ if (rts->disabled)
++ rthr = MAX_RTS_THRESHOLD;
++
++ if ((rthr < 0) || (rthr > MAX_RTS_THRESHOLD))
++ ret = -EINVAL;
++ else
++ priv->rts_threshold = rthr;
++
++ return ret;
++}
++
++static int at76_iw_handler_get_rts(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *rts, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ rts->value = priv->rts_threshold;
++ rts->disabled = (rts->value >= MAX_RTS_THRESHOLD);
++ rts->fixed = 1;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWRTS - value %d disabled %s",
++ netdev->name, rts->value, (rts->disabled) ? "true" : "false");
++
++ return 0;
++}
++
++static int at76_iw_handler_set_frag(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *frag, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = -EIWCOMMIT;
++ int fthr = frag->value;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWFRAG - value %d, disabled %s",
++ netdev->name, frag->value,
++ (frag->disabled) ? "true" : "false");
++
++ if (frag->disabled)
++ fthr = MAX_FRAG_THRESHOLD;
++
++ if ((fthr < MIN_FRAG_THRESHOLD) || (fthr > MAX_FRAG_THRESHOLD))
++ ret = -EINVAL;
++ else
++ priv->frag_threshold = fthr & ~0x1; /* get an even value */
++
++ return ret;
++}
++
++static int at76_iw_handler_get_frag(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *frag, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ frag->value = priv->frag_threshold;
++ frag->disabled = (frag->value >= MAX_FRAG_THRESHOLD);
++ frag->fixed = 1;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWFRAG - value %d, disabled %s",
++ netdev->name, frag->value,
++ (frag->disabled) ? "true" : "false");
++
++ return 0;
++}
++
++static int at76_iw_handler_get_txpow(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *power, char *extra)
++{
++ power->value = 15;
++ power->fixed = 1; /* No power control */
++ power->disabled = 0;
++ power->flags = IW_TXPOW_DBM;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWTXPOW - txpow %d dBm", netdev->name,
++ power->value);
++
++ return 0;
++}
++
++/* jal: short retry is handled by the firmware (at least 0.90.x),
++ while long retry is not (?) */
++static int at76_iw_handler_set_retry(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *retry, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = -EIWCOMMIT;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWRETRY disabled %d flags 0x%x val %d",
++ netdev->name, retry->disabled, retry->flags, retry->value);
++
++ if (!retry->disabled && (retry->flags & IW_RETRY_LIMIT)) {
++ if ((retry->flags & IW_RETRY_MIN) ||
++ !(retry->flags & IW_RETRY_MAX))
++ priv->short_retry_limit = retry->value;
++ else
++ ret = -EINVAL;
++ } else
++ ret = -EINVAL;
++
++ return ret;
++}
++
++/* Adapted (ripped) from atmel.c */
++static int at76_iw_handler_get_retry(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *retry, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWRETRY", netdev->name);
++
++ retry->disabled = 0; /* Can't be disabled */
++ retry->flags = IW_RETRY_LIMIT;
++ retry->value = priv->short_retry_limit;
++
++ return 0;
++}
++
++static int at76_iw_handler_set_encode(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *encoding, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int index = (encoding->flags & IW_ENCODE_INDEX) - 1;
++ int len = encoding->length;
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCSIWENCODE - enc.flags %08x "
++ "pointer %p len %d", netdev->name, encoding->flags,
++ encoding->pointer, encoding->length);
++ at76_dbg(DBG_IOCTL,
++ "%s: SIOCSIWENCODE - old wepstate: enabled %s key_id %d "
++ "auth_mode %s", netdev->name,
++ (priv->wep_enabled) ? "true" : "false", priv->wep_key_id,
++ (priv->auth_mode ==
++ WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
++
++ /* take the old default key if index is invalid */
++ if ((index < 0) || (index >= WEP_KEYS))
++ index = priv->wep_key_id;
++
++ if (len > 0) {
++ if (len > WEP_LARGE_KEY_LEN)
++ len = WEP_LARGE_KEY_LEN;
++
++ memset(priv->wep_keys[index], 0, WEP_KEY_LEN);
++ memcpy(priv->wep_keys[index], extra, len);
++ priv->wep_keys_len[index] = (len <= WEP_SMALL_KEY_LEN) ?
++ WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
++ priv->wep_enabled = 1;
++ }
++
++ priv->wep_key_id = index;
++ priv->wep_enabled = ((encoding->flags & IW_ENCODE_DISABLED) == 0);
++
++ if (encoding->flags & IW_ENCODE_RESTRICTED)
++ priv->auth_mode = WLAN_AUTH_SHARED_KEY;
++ if (encoding->flags & IW_ENCODE_OPEN)
++ priv->auth_mode = WLAN_AUTH_OPEN;
++
++ at76_dbg(DBG_IOCTL,
++ "%s: SIOCSIWENCODE - new wepstate: enabled %s key_id %d "
++ "key_len %d auth_mode %s", netdev->name,
++ (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1,
++ priv->wep_keys_len[priv->wep_key_id],
++ (priv->auth_mode ==
++ WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
++
++ return -EIWCOMMIT;
++}
++
++static int at76_iw_handler_get_encode(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *encoding, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int index = (encoding->flags & IW_ENCODE_INDEX) - 1;
++
++ if ((index < 0) || (index >= WEP_KEYS))
++ index = priv->wep_key_id;
++
++ encoding->flags =
++ (priv->auth_mode == WLAN_AUTH_SHARED_KEY) ?
++ IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN;
++
++ if (!priv->wep_enabled)
++ encoding->flags |= IW_ENCODE_DISABLED;
++
++ if (encoding->pointer) {
++ encoding->length = priv->wep_keys_len[index];
++
++ memcpy(extra, priv->wep_keys[index], priv->wep_keys_len[index]);
++
++ encoding->flags |= (index + 1);
++ }
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWENCODE - enc.flags %08x "
++ "pointer %p len %d", netdev->name, encoding->flags,
++ encoding->pointer, encoding->length);
++ at76_dbg(DBG_IOCTL,
++ "%s: SIOCGIWENCODE - wepstate: enabled %s key_id %d "
++ "key_len %d auth_mode %s", netdev->name,
++ (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1,
++ priv->wep_keys_len[priv->wep_key_id],
++ (priv->auth_mode ==
++ WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
++
++ return 0;
++}
++
++static int at76_iw_handler_set_power(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *prq, char *extra)
++{
++ int err = -EIWCOMMIT;
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_IOCTL,
++ "%s: SIOCSIWPOWER - disabled %s flags 0x%x value 0x%x",
++ netdev->name, (prq->disabled) ? "true" : "false", prq->flags,
++ prq->value);
++
++ if (prq->disabled)
++ priv->pm_mode = AT76_PM_OFF;
++ else {
++ switch (prq->flags & IW_POWER_MODE) {
++ case IW_POWER_ALL_R:
++ case IW_POWER_ON:
++ break;
++ default:
++ err = -EINVAL;
++ goto exit;
++ }
++ if (prq->flags & IW_POWER_PERIOD)
++ priv->pm_period = prq->value;
++
++ if (prq->flags & IW_POWER_TIMEOUT) {
++ err = -EINVAL;
++ goto exit;
++ }
++ priv->pm_mode = AT76_PM_ON;
++ }
++exit:
++ return err;
++}
++
++static int at76_iw_handler_get_power(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_param *power, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ power->disabled = (priv->pm_mode == AT76_PM_OFF);
++ if (!power->disabled) {
++ power->flags = IW_POWER_PERIOD | IW_POWER_ALL_R;
++ power->value = priv->pm_period;
++ }
++
++ at76_dbg(DBG_IOCTL, "%s: SIOCGIWPOWER - %s flags 0x%x value 0x%x",
++ netdev->name, power->disabled ? "disabled" : "enabled",
++ power->flags, power->value);
++
++ return 0;
++}
++
++/*******************************************************************************
++ * Private IOCTLS
++ */
++static int at76_iw_set_short_preamble(struct net_device *netdev,
++ struct iw_request_info *info, char *name,
++ char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int val = *((int *)name);
++ int ret = -EIWCOMMIT;
++
++ at76_dbg(DBG_IOCTL, "%s: AT76_SET_SHORT_PREAMBLE, %d",
++ netdev->name, val);
++
++ if (val < PREAMBLE_TYPE_LONG || val > PREAMBLE_TYPE_AUTO)
++ ret = -EINVAL;
++ else
++ priv->preamble_type = val;
++
++ return ret;
++}
++
++static int at76_iw_get_short_preamble(struct net_device *netdev,
++ struct iw_request_info *info,
++ union iwreq_data *wrqu, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ snprintf(wrqu->name, sizeof(wrqu->name), "%s (%d)",
++ preambles[priv->preamble_type], priv->preamble_type);
++ return 0;
++}
++
++static int at76_iw_set_debug(struct net_device *netdev,
++ struct iw_request_info *info,
++ struct iw_point *data, char *extra)
++{
++ char *ptr;
++ u32 val;
++
++ if (data->length > 0) {
++ val = simple_strtol(extra, &ptr, 0);
++
++ if (ptr == extra)
++ val = DBG_DEFAULTS;
++
++ at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG input %d: %s -> 0x%x",
++ netdev->name, data->length, extra, val);
++ } else
++ val = DBG_DEFAULTS;
++
++ at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG, old 0x%x, new 0x%x",
++ netdev->name, at76_debug, val);
++
++ /* jal: some more output to pin down lockups */
++ at76_dbg(DBG_IOCTL, "%s: netif running %d queue_stopped %d "
++ "carrier_ok %d", netdev->name, netif_running(netdev),
++ netif_queue_stopped(netdev), netif_carrier_ok(netdev));
++
++ at76_debug = val;
++
++ return 0;
++}
++
++static int at76_iw_get_debug(struct net_device *netdev,
++ struct iw_request_info *info,
++ union iwreq_data *wrqu, char *extra)
++{
++ snprintf(wrqu->name, sizeof(wrqu->name), "0x%08x", at76_debug);
++ return 0;
++}
++
++static int at76_iw_set_powersave_mode(struct net_device *netdev,
++ struct iw_request_info *info, char *name,
++ char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int val = *((int *)name);
++ int ret = -EIWCOMMIT;
++
++ at76_dbg(DBG_IOCTL, "%s: AT76_SET_POWERSAVE_MODE, %d (%s)",
++ netdev->name, val,
++ val == AT76_PM_OFF ? "active" : val == AT76_PM_ON ? "save" :
++ val == AT76_PM_SMART ? "smart save" : "<invalid>");
++ if (val < AT76_PM_OFF || val > AT76_PM_SMART)
++ ret = -EINVAL;
++ else
++ priv->pm_mode = val;
++
++ return ret;
++}
++
++static int at76_iw_get_powersave_mode(struct net_device *netdev,
++ struct iw_request_info *info,
++ union iwreq_data *wrqu, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int *param = (int *)extra;
++
++ param[0] = priv->pm_mode;
++ return 0;
++}
++
++static int at76_iw_set_scan_times(struct net_device *netdev,
++ struct iw_request_info *info, char *name,
++ char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int mint = *((int *)name);
++ int maxt = *((int *)name + 1);
++ int ret = -EIWCOMMIT;
++
++ at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_TIMES - min %d max %d",
++ netdev->name, mint, maxt);
++ if (mint <= 0 || maxt <= 0 || mint > maxt)
++ ret = -EINVAL;
++ else {
++ priv->scan_min_time = mint;
++ priv->scan_max_time = maxt;
++ }
++
++ return ret;
++}
++
++static int at76_iw_get_scan_times(struct net_device *netdev,
++ struct iw_request_info *info,
++ union iwreq_data *wrqu, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int *param = (int *)extra;
++
++ param[0] = priv->scan_min_time;
++ param[1] = priv->scan_max_time;
++ return 0;
++}
++
++static int at76_iw_set_scan_mode(struct net_device *netdev,
++ struct iw_request_info *info, char *name,
++ char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int val = *((int *)name);
++ int ret = -EIWCOMMIT;
++
++ at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_MODE - mode %s",
++ netdev->name, (val = SCAN_TYPE_ACTIVE) ? "active" :
++ (val = SCAN_TYPE_PASSIVE) ? "passive" : "<invalid>");
++
++ if (val != SCAN_TYPE_ACTIVE && val != SCAN_TYPE_PASSIVE)
++ ret = -EINVAL;
++ else
++ priv->scan_mode = val;
++
++ return ret;
++}
++
++static int at76_iw_get_scan_mode(struct net_device *netdev,
++ struct iw_request_info *info,
++ union iwreq_data *wrqu, char *extra)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int *param = (int *)extra;
++
++ param[0] = priv->scan_mode;
++ return 0;
++}
++
++#define AT76_SET_HANDLER(h, f) [h - SIOCIWFIRST] = (iw_handler) f
++
++/* Standard wireless handlers */
++static const iw_handler at76_handlers[] = {
++ AT76_SET_HANDLER(SIOCSIWCOMMIT, at76_iw_handler_commit),
++ AT76_SET_HANDLER(SIOCGIWNAME, at76_iw_handler_get_name),
++ AT76_SET_HANDLER(SIOCSIWFREQ, at76_iw_handler_set_freq),
++ AT76_SET_HANDLER(SIOCGIWFREQ, at76_iw_handler_get_freq),
++ AT76_SET_HANDLER(SIOCSIWMODE, at76_iw_handler_set_mode),
++ AT76_SET_HANDLER(SIOCGIWMODE, at76_iw_handler_get_mode),
++ AT76_SET_HANDLER(SIOCGIWRANGE, at76_iw_handler_get_range),
++ AT76_SET_HANDLER(SIOCSIWSPY, at76_iw_handler_set_spy),
++ AT76_SET_HANDLER(SIOCGIWSPY, at76_iw_handler_get_spy),
++ AT76_SET_HANDLER(SIOCSIWTHRSPY, at76_iw_handler_set_thrspy),
++ AT76_SET_HANDLER(SIOCGIWTHRSPY, at76_iw_handler_get_thrspy),
++ AT76_SET_HANDLER(SIOCSIWAP, at76_iw_handler_set_wap),
++ AT76_SET_HANDLER(SIOCGIWAP, at76_iw_handler_get_wap),
++ AT76_SET_HANDLER(SIOCSIWSCAN, at76_iw_handler_set_scan),
++ AT76_SET_HANDLER(SIOCGIWSCAN, at76_iw_handler_get_scan),
++ AT76_SET_HANDLER(SIOCSIWESSID, at76_iw_handler_set_essid),
++ AT76_SET_HANDLER(SIOCGIWESSID, at76_iw_handler_get_essid),
++ AT76_SET_HANDLER(SIOCSIWRATE, at76_iw_handler_set_rate),
++ AT76_SET_HANDLER(SIOCGIWRATE, at76_iw_handler_get_rate),
++ AT76_SET_HANDLER(SIOCSIWRTS, at76_iw_handler_set_rts),
++ AT76_SET_HANDLER(SIOCGIWRTS, at76_iw_handler_get_rts),
++ AT76_SET_HANDLER(SIOCSIWFRAG, at76_iw_handler_set_frag),
++ AT76_SET_HANDLER(SIOCGIWFRAG, at76_iw_handler_get_frag),
++ AT76_SET_HANDLER(SIOCGIWTXPOW, at76_iw_handler_get_txpow),
++ AT76_SET_HANDLER(SIOCSIWRETRY, at76_iw_handler_set_retry),
++ AT76_SET_HANDLER(SIOCGIWRETRY, at76_iw_handler_get_retry),
++ AT76_SET_HANDLER(SIOCSIWENCODE, at76_iw_handler_set_encode),
++ AT76_SET_HANDLER(SIOCGIWENCODE, at76_iw_handler_get_encode),
++ AT76_SET_HANDLER(SIOCSIWPOWER, at76_iw_handler_set_power),
++ AT76_SET_HANDLER(SIOCGIWPOWER, at76_iw_handler_get_power)
++};
++
++#define AT76_SET_PRIV(h, f) [h - SIOCIWFIRSTPRIV] = (iw_handler) f
++
++/* Private wireless handlers */
++static const iw_handler at76_priv_handlers[] = {
++ AT76_SET_PRIV(AT76_SET_SHORT_PREAMBLE, at76_iw_set_short_preamble),
++ AT76_SET_PRIV(AT76_GET_SHORT_PREAMBLE, at76_iw_get_short_preamble),
++ AT76_SET_PRIV(AT76_SET_DEBUG, at76_iw_set_debug),
++ AT76_SET_PRIV(AT76_GET_DEBUG, at76_iw_get_debug),
++ AT76_SET_PRIV(AT76_SET_POWERSAVE_MODE, at76_iw_set_powersave_mode),
++ AT76_SET_PRIV(AT76_GET_POWERSAVE_MODE, at76_iw_get_powersave_mode),
++ AT76_SET_PRIV(AT76_SET_SCAN_TIMES, at76_iw_set_scan_times),
++ AT76_SET_PRIV(AT76_GET_SCAN_TIMES, at76_iw_get_scan_times),
++ AT76_SET_PRIV(AT76_SET_SCAN_MODE, at76_iw_set_scan_mode),
++ AT76_SET_PRIV(AT76_GET_SCAN_MODE, at76_iw_get_scan_mode),
++};
++
++/* Names and arguments of private wireless handlers */
++static const struct iw_priv_args at76_priv_args[] = {
++ /* 0 - long, 1 - short */
++ {AT76_SET_SHORT_PREAMBLE,
++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
++
++ {AT76_GET_SHORT_PREAMBLE,
++ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_preamble"},
++
++ /* we must pass the new debug mask as a string, because iwpriv cannot
++ * parse hex numbers starting with 0x :-( */
++ {AT76_SET_DEBUG,
++ IW_PRIV_TYPE_CHAR | 10, 0, "set_debug"},
++
++ {AT76_GET_DEBUG,
++ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_debug"},
++
++ /* 1 - active, 2 - power save, 3 - smart power save */
++ {AT76_SET_POWERSAVE_MODE,
++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_powersave"},
++
++ {AT76_GET_POWERSAVE_MODE,
++ 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_powersave"},
++
++ /* min_channel_time, max_channel_time */
++ {AT76_SET_SCAN_TIMES,
++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_scan_times"},
++
++ {AT76_GET_SCAN_TIMES,
++ 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, "get_scan_times"},
++
++ /* 0 - active, 1 - passive scan */
++ {AT76_SET_SCAN_MODE,
++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_scan_mode"},
++
++ {AT76_GET_SCAN_MODE,
++ 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_scan_mode"},
++};
++
++static const struct iw_handler_def at76_handler_def = {
++ .num_standard = ARRAY_SIZE(at76_handlers),
++ .num_private = ARRAY_SIZE(at76_priv_handlers),
++ .num_private_args = ARRAY_SIZE(at76_priv_args),
++ .standard = at76_handlers,
++ .private = at76_priv_handlers,
++ .private_args = at76_priv_args,
++ .get_wireless_stats = at76_get_wireless_stats,
++};
++
++static const u8 snapsig[] = { 0xaa, 0xaa, 0x03 };
++
++/* RFC 1042 encapsulates Ethernet frames in 802.2 SNAP (0xaa, 0xaa, 0x03) with
++ * a SNAP OID of 0 (0x00, 0x00, 0x00) */
++static const u8 rfc1042sig[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
++
++static int at76_tx(struct sk_buff *skb, struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ struct net_device_stats *stats = &priv->stats;
++ int ret = 0;
++ int wlen;
++ int submit_len;
++ struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
++ struct ieee80211_hdr_3addr *i802_11_hdr =
++ (struct ieee80211_hdr_3addr *)tx_buffer->packet;
++ u8 *payload = i802_11_hdr->payload;
++ struct ethhdr *eh = (struct ethhdr *)skb->data;
++
++ if (netif_queue_stopped(netdev)) {
++ printk(KERN_ERR "%s: %s called while netdev is stopped\n",
++ netdev->name, __func__);
++ /* skip this packet */
++ dev_kfree_skb(skb);
++ return 0;
++ }
++
++ if (priv->tx_urb->status == -EINPROGRESS) {
++ printk(KERN_ERR "%s: %s called while tx urb is pending\n",
++ netdev->name, __func__);
++ /* skip this packet */
++ dev_kfree_skb(skb);
++ return 0;
++ }
++
++ if (skb->len < ETH_HLEN) {
++ printk(KERN_ERR "%s: %s: skb too short (%d)\n",
++ netdev->name, __func__, skb->len);
++ dev_kfree_skb(skb);
++ return 0;
++ }
++
++ at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */
++
++ /* we can get rid of memcpy if we set netdev->hard_header_len to
++ reserve enough space, but we would need to keep the skb around */
++
++ if (ntohs(eh->h_proto) <= ETH_DATA_LEN) {
++ /* this is a 802.3 packet */
++ if (skb->len >= ETH_HLEN + sizeof(rfc1042sig)
++ && skb->data[ETH_HLEN] == rfc1042sig[0]
++ && skb->data[ETH_HLEN + 1] == rfc1042sig[1]) {
++ /* higher layer delivered SNAP header - keep it */
++ memcpy(payload, skb->data + ETH_HLEN,
++ skb->len - ETH_HLEN);
++ wlen = IEEE80211_3ADDR_LEN + skb->len - ETH_HLEN;
++ } else {
++ printk(KERN_ERR "%s: dropping non-SNAP 802.2 packet "
++ "(DSAP 0x%02x SSAP 0x%02x cntrl 0x%02x)\n",
++ priv->netdev->name, skb->data[ETH_HLEN],
++ skb->data[ETH_HLEN + 1],
++ skb->data[ETH_HLEN + 2]);
++ dev_kfree_skb(skb);
++ return 0;
++ }
++ } else {
++ /* add RFC 1042 header in front */
++ memcpy(payload, rfc1042sig, sizeof(rfc1042sig));
++ memcpy(payload + sizeof(rfc1042sig), &eh->h_proto,
++ skb->len - offsetof(struct ethhdr, h_proto));
++ wlen = IEEE80211_3ADDR_LEN + sizeof(rfc1042sig) + skb->len -
++ offsetof(struct ethhdr, h_proto);
++ }
++
++ /* make wireless header */
++ i802_11_hdr->frame_ctl =
++ cpu_to_le16(IEEE80211_FTYPE_DATA |
++ (priv->wep_enabled ? IEEE80211_FCTL_PROTECTED : 0) |
++ (priv->iw_mode ==
++ IW_MODE_INFRA ? IEEE80211_FCTL_TODS : 0));
++
++ if (priv->iw_mode == IW_MODE_ADHOC) {
++ memcpy(i802_11_hdr->addr1, eh->h_dest, ETH_ALEN);
++ memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN);
++ memcpy(i802_11_hdr->addr3, priv->bssid, ETH_ALEN);
++ } else if (priv->iw_mode == IW_MODE_INFRA) {
++ memcpy(i802_11_hdr->addr1, priv->bssid, ETH_ALEN);
++ memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN);
++ memcpy(i802_11_hdr->addr3, eh->h_dest, ETH_ALEN);
++ }
++
++ i802_11_hdr->duration_id = cpu_to_le16(0);
++ i802_11_hdr->seq_ctl = cpu_to_le16(0);
++
++ /* setup 'Atmel' header */
++ tx_buffer->wlength = cpu_to_le16(wlen);
++ tx_buffer->tx_rate = priv->txrate;
++ /* for broadcast destination addresses, the firmware 0.100.x
++ seems to choose the highest rate set with CMD_STARTUP in
++ basic_rate_set replacing this value */
++
++ memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
++
++ tx_buffer->padding = at76_calc_padding(wlen);
++ submit_len = wlen + AT76_TX_HDRLEN + tx_buffer->padding;
++
++ at76_dbg(DBG_TX_DATA_CONTENT, "%s skb->data %s", priv->netdev->name,
++ hex2str(skb->data, 32));
++ at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr %s",
++ priv->netdev->name,
++ le16_to_cpu(tx_buffer->wlength),
++ tx_buffer->padding, tx_buffer->tx_rate,
++ hex2str(i802_11_hdr, sizeof(*i802_11_hdr)));
++ at76_dbg(DBG_TX_DATA_CONTENT, "%s payload %s", priv->netdev->name,
++ hex2str(payload, 48));
++
++ /* send stuff */
++ netif_stop_queue(netdev);
++ netdev->trans_start = jiffies;
++
++ usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
++ submit_len, at76_tx_callback, priv);
++ ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
++ if (ret) {
++ stats->tx_errors++;
++ printk(KERN_ERR "%s: error in tx submit urb: %d\n",
++ netdev->name, ret);
++ if (ret == -EINVAL)
++ printk(KERN_ERR
++ "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
++ priv->netdev->name, priv->tx_urb,
++ priv->tx_urb->hcpriv, priv->tx_urb->complete);
++ } else {
++ stats->tx_bytes += skb->len;
++ dev_kfree_skb(skb);
++ }
++
++ return ret;
++}
++
++static void at76_tx_timeout(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ if (!priv)
++ return;
++ warn("%s: tx timeout.", netdev->name);
++
++ usb_unlink_urb(priv->tx_urb);
++ priv->stats.tx_errors++;
++}
++
++static int at76_submit_rx_urb(struct at76_priv *priv)
++{
++ int ret;
++ int size;
++ struct sk_buff *skb = priv->rx_skb;
++
++ if (!priv->rx_urb) {
++ printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
++ priv->netdev->name, __func__);
++ return -EFAULT;
++ }
++
++ if (!skb) {
++ skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
++ if (!skb) {
++ printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
++ priv->netdev->name);
++ ret = -ENOMEM;
++ goto exit;
++ }
++ priv->rx_skb = skb;
++ } else {
++ skb_push(skb, skb_headroom(skb));
++ skb_trim(skb, 0);
++ }
++
++ size = skb_tailroom(skb);
++ usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
++ skb_put(skb, size), size, at76_rx_callback, priv);
++ ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
++ if (ret < 0) {
++ if (ret == -ENODEV)
++ at76_dbg(DBG_DEVSTART,
++ "usb_submit_urb returned -ENODEV");
++ else
++ printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
++ priv->netdev->name, ret);
++ }
++
++exit:
++ if (ret < 0 && ret != -ENODEV)
++ printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
++ "driver and/or power cycle the device\n",
++ priv->netdev->name);
++
++ return ret;
++}
++
++static int at76_open(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ int ret = 0;
++
++ at76_dbg(DBG_PROC_ENTRY, "%s(): entry", __func__);
++
++ if (mutex_lock_interruptible(&priv->mtx))
++ return -EINTR;
++
++ /* if netdev->dev_addr != priv->mac_addr we must
++ set the mac address in the device ! */
++ if (compare_ether_addr(netdev->dev_addr, priv->mac_addr)) {
++ if (at76_add_mac_address(priv, netdev->dev_addr) >= 0)
++ at76_dbg(DBG_PROGRESS, "%s: set new MAC addr %s",
++ netdev->name, mac2str(netdev->dev_addr));
++ }
++
++ priv->scan_state = SCAN_IDLE;
++ priv->last_scan = jiffies;
++
++ ret = at76_submit_rx_urb(priv);
++ if (ret < 0) {
++ printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
++ netdev->name, ret);
++ goto error;
++ }
++
++ schedule_delayed_work(&priv->dwork_restart, 0);
++
++ at76_dbg(DBG_PROC_ENTRY, "%s(): end", __func__);
++error:
++ mutex_unlock(&priv->mtx);
++ return ret < 0 ? ret : 0;
++}
++
++static int at76_stop(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ at76_dbg(DBG_DEVSTART, "%s: ENTER", __func__);
++
++ if (mutex_lock_interruptible(&priv->mtx))
++ return -EINTR;
++
++ at76_quiesce(priv);
++
++ if (!priv->device_unplugged) {
++ /* We are called by "ifconfig ethX down", not because the
++ * device is not available anymore. */
++ at76_set_radio(priv, 0);
++
++ /* We unlink rx_urb because at76_open() re-submits it.
++ * If unplugged, at76_delete_device() takes care of it. */
++ usb_kill_urb(priv->rx_urb);
++ }
++
++ /* free the bss_list */
++ at76_free_bss_list(priv);
++
++ mutex_unlock(&priv->mtx);
++ at76_dbg(DBG_DEVSTART, "%s: EXIT", __func__);
++
++ return 0;
++}
++
++static void at76_ethtool_get_drvinfo(struct net_device *netdev,
++ struct ethtool_drvinfo *info)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++
++ strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
++ strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
++
++ usb_make_path(priv->udev, info->bus_info, sizeof(info->bus_info));
++
++ snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d-%d",
++ priv->fw_version.major, priv->fw_version.minor,
++ priv->fw_version.patch, priv->fw_version.build);
++}
++
++static u32 at76_ethtool_get_link(struct net_device *netdev)
++{
++ struct at76_priv *priv = netdev_priv(netdev);
++ return priv->mac_state == MAC_CONNECTED;
++}
++
++static struct ethtool_ops at76_ethtool_ops = {
++ .get_drvinfo = at76_ethtool_get_drvinfo,
++ .get_link = at76_ethtool_get_link,
++};
++
++/* Download external firmware */
++static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
++{
++ int ret;
++ int op_mode;
++ int blockno = 0;
++ int bsize;
++ u8 *block;
++ u8 *buf = fwe->extfw;
++ int size = fwe->extfw_size;
++
++ if (!buf || !size)
++ return -ENOENT;
++
++ op_mode = at76_get_op_mode(udev);
++ at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
++
++ if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
++ dev_printk(KERN_ERR, &udev->dev, "unexpected opmode %d\n",
++ op_mode);
++ return -EINVAL;
++ }
++
++ block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
++ if (!block)
++ return -ENOMEM;
++
++ at76_dbg(DBG_DEVSTART, "downloading external firmware");
++
++ /* for fw >= 0.100, the device needs an extra empty block */
++ do {
++ bsize = min_t(int, size, FW_BLOCK_SIZE);
++ memcpy(block, buf, bsize);
++ at76_dbg(DBG_DEVSTART,
++ "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
++ size, bsize, blockno);
++ ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
++ if (ret != bsize) {
++ dev_printk(KERN_ERR, &udev->dev,
++ "loading %dth firmware block failed: %d\n",
++ blockno, ret);
++ goto exit;
++ }
++ buf += bsize;
++ size -= bsize;
++ blockno++;
++ } while (bsize > 0);
++
++ if (at76_is_505a(fwe->board_type)) {
++ at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
++ schedule_timeout_interruptible(HZ / 5 + 1);
++ }
++
++exit:
++ kfree(block);
++ if (ret < 0)
++ dev_printk(KERN_ERR, &udev->dev,
++ "downloading external firmware failed: %d\n", ret);
++ return ret;
++}
++
++/* Download internal firmware */
++static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
++{
++ int ret;
++ int need_remap = !at76_is_505a(fwe->board_type);
++
++ ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
++ need_remap ? 0 : 2 * HZ);
++
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &udev->dev,
++ "downloading internal fw failed with %d\n", ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_DEVSTART, "sending REMAP");
++
++ /* no REMAP for 505A (see SF driver) */
++ if (need_remap) {
++ ret = at76_remap(udev);
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &udev->dev,
++ "sending REMAP failed with %d\n", ret);
++ goto exit;
++ }
++ }
++
++ at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
++ schedule_timeout_interruptible(2 * HZ + 1);
++ usb_reset_device(udev);
++
++exit:
++ return ret;
++}
++
++static int at76_match_essid(struct at76_priv *priv, struct bss_info *ptr)
++{
++ /* common criteria for both modi */
++
++ int ret = (priv->essid_size == 0 /* ANY ssid */ ||
++ (priv->essid_size == ptr->ssid_len &&
++ !memcmp(priv->essid, ptr->ssid, ptr->ssid_len)));
++ if (!ret)
++ at76_dbg(DBG_BSS_MATCH,
++ "%s bss table entry %p: essid didn't match",
++ priv->netdev->name, ptr);
++ return ret;
++}
++
++static inline int at76_match_mode(struct at76_priv *priv, struct bss_info *ptr)
++{
++ int ret;
++
++ if (priv->iw_mode == IW_MODE_ADHOC)
++ ret = ptr->capa & WLAN_CAPABILITY_IBSS;
++ else
++ ret = ptr->capa & WLAN_CAPABILITY_ESS;
++ if (!ret)
++ at76_dbg(DBG_BSS_MATCH,
++ "%s bss table entry %p: mode didn't match",
++ priv->netdev->name, ptr);
++ return ret;
++}
++
++static int at76_match_rates(struct at76_priv *priv, struct bss_info *ptr)
++{
++ int i;
++
++ for (i = 0; i < ptr->rates_len; i++) {
++ u8 rate = ptr->rates[i];
++
++ if (!(rate & 0x80))
++ continue;
++
++ /* this is a basic rate we have to support
++ (see IEEE802.11, ch. 7.3.2.2) */
++ if (rate != (0x80 | hw_rates[0])
++ && rate != (0x80 | hw_rates[1])
++ && rate != (0x80 | hw_rates[2])
++ && rate != (0x80 | hw_rates[3])) {
++ at76_dbg(DBG_BSS_MATCH,
++ "%s: bss table entry %p: basic rate %02x not "
++ "supported", priv->netdev->name, ptr, rate);
++ return 0;
++ }
++ }
++
++ /* if we use short preamble, the bss must support it */
++ if (priv->preamble_type == PREAMBLE_TYPE_SHORT &&
++ !(ptr->capa & WLAN_CAPABILITY_SHORT_PREAMBLE)) {
++ at76_dbg(DBG_BSS_MATCH,
++ "%s: %p does not support short preamble",
++ priv->netdev->name, ptr);
++ return 0;
++ } else
++ return 1;
++}
++
++static inline int at76_match_wep(struct at76_priv *priv, struct bss_info *ptr)
++{
++ if (!priv->wep_enabled && ptr->capa & WLAN_CAPABILITY_PRIVACY) {
++ /* we have disabled WEP, but the BSS signals privacy */
++ at76_dbg(DBG_BSS_MATCH,
++ "%s: bss table entry %p: requires encryption",
++ priv->netdev->name, ptr);
++ return 0;
++ }
++ /* otherwise if the BSS does not signal privacy it may well
++ accept encrypted packets from us ... */
++ return 1;
++}
++
++static inline int at76_match_bssid(struct at76_priv *priv, struct bss_info *ptr)
++{
++ if (!priv->wanted_bssid_valid ||
++ !compare_ether_addr(ptr->bssid, priv->wanted_bssid))
++ return 1;
++
++ at76_dbg(DBG_BSS_MATCH,
++ "%s: requested bssid - %s does not match",
++ priv->netdev->name, mac2str(priv->wanted_bssid));
++ at76_dbg(DBG_BSS_MATCH,
++ " AP bssid - %s of bss table entry %p",
++ mac2str(ptr->bssid), ptr);
++ return 0;
++}
++
++/**
++ * at76_match_bss - try to find a matching bss in priv->bss
++ *
++ * last - last bss tried
++ *
++ * last == NULL signals a new round starting with priv->bss_list.next
++ * this function must be called inside an acquired priv->bss_list_spinlock
++ * otherwise the timeout on bss may remove the newly chosen entry
++ */
++static struct bss_info *at76_match_bss(struct at76_priv *priv,
++ struct bss_info *last)
++{
++ struct bss_info *ptr = NULL;
++ struct list_head *curr;
++
++ curr = last ? last->list.next : priv->bss_list.next;
++ while (curr != &priv->bss_list) {
++ ptr = list_entry(curr, struct bss_info, list);
++ if (at76_match_essid(priv, ptr) && at76_match_mode(priv, ptr)
++ && at76_match_wep(priv, ptr) && at76_match_rates(priv, ptr)
++ && at76_match_bssid(priv, ptr))
++ break;
++ curr = curr->next;
++ }
++
++ if (curr == &priv->bss_list)
++ ptr = NULL;
++ /* otherwise ptr points to the struct bss_info we have chosen */
++
++ at76_dbg(DBG_BSS_TABLE, "%s %s: returned %p", priv->netdev->name,
++ __func__, ptr);
++ return ptr;
++}
++
++/* Start joining a matching BSS, or create own IBSS */
++static void at76_work_join(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ work_join);
++ int ret;
++ unsigned long flags;
++
++ mutex_lock(&priv->mtx);
++
++ WARN_ON(priv->mac_state != MAC_JOINING);
++ if (priv->mac_state != MAC_JOINING)
++ goto exit;
++
++ /* secure the access to priv->curr_bss ! */
++ spin_lock_irqsave(&priv->bss_list_spinlock, flags);
++ priv->curr_bss = at76_match_bss(priv, priv->curr_bss);
++ spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++
++ if (!priv->curr_bss) {
++ /* here we haven't found a matching (i)bss ... */
++ if (priv->iw_mode == IW_MODE_ADHOC) {
++ at76_set_mac_state(priv, MAC_OWN_IBSS);
++ at76_start_ibss(priv);
++ goto exit;
++ }
++ /* haven't found a matching BSS in infra mode - try again */
++ at76_set_mac_state(priv, MAC_SCANNING);
++ schedule_work(&priv->work_start_scan);
++ goto exit;
++ }
++
++ ret = at76_join_bss(priv, priv->curr_bss);
++ if (ret < 0) {
++ printk(KERN_ERR "%s: join_bss failed with %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ ret = at76_wait_completion(priv, CMD_JOIN);
++ if (ret != CMD_STATUS_COMPLETE) {
++ if (ret != CMD_STATUS_TIME_OUT)
++ printk(KERN_ERR "%s: join_bss completed with %d\n",
++ priv->netdev->name, ret);
++ else
++ printk(KERN_INFO "%s: join_bss ssid %s timed out\n",
++ priv->netdev->name,
++ mac2str(priv->curr_bss->bssid));
++
++ /* retry next BSS immediately */
++ schedule_work(&priv->work_join);
++ goto exit;
++ }
++
++ /* here we have joined the (I)BSS */
++ if (priv->iw_mode == IW_MODE_ADHOC) {
++ struct bss_info *bptr = priv->curr_bss;
++ at76_set_mac_state(priv, MAC_CONNECTED);
++ /* get ESSID, BSSID and channel for priv->curr_bss */
++ priv->essid_size = bptr->ssid_len;
++ memcpy(priv->essid, bptr->ssid, bptr->ssid_len);
++ memcpy(priv->bssid, bptr->bssid, ETH_ALEN);
++ priv->channel = bptr->channel;
++ at76_iwevent_bss_connect(priv->netdev, bptr->bssid);
++ netif_carrier_on(priv->netdev);
++ netif_start_queue(priv->netdev);
++ /* just to be sure */
++ cancel_delayed_work(&priv->dwork_get_scan);
++ cancel_delayed_work(&priv->dwork_auth);
++ cancel_delayed_work(&priv->dwork_assoc);
++ } else {
++ /* send auth req */
++ priv->retries = AUTH_RETRIES;
++ at76_set_mac_state(priv, MAC_AUTH);
++ at76_auth_req(priv, priv->curr_bss, 1, NULL);
++ at76_dbg(DBG_MGMT_TIMER,
++ "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__);
++ schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
++ }
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* Reap scan results */
++static void at76_dwork_get_scan(struct work_struct *work)
++{
++ int status;
++ int ret;
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ dwork_get_scan.work);
++
++ mutex_lock(&priv->mtx);
++ WARN_ON(priv->mac_state != MAC_SCANNING);
++ if (priv->mac_state != MAC_SCANNING)
++ goto exit;
++
++ status = at76_get_cmd_status(priv->udev, CMD_SCAN);
++ if (status < 0) {
++ printk(KERN_ERR "%s: %s: at76_get_cmd_status failed with %d\n",
++ priv->netdev->name, __func__, status);
++ status = CMD_STATUS_IN_PROGRESS;
++ /* INFO: Hope it was a one off error - if not, scanning
++ further down the line and stop this cycle */
++ }
++ at76_dbg(DBG_PROGRESS,
++ "%s %s: got cmd_status %d (state %s, need_any %d)",
++ priv->netdev->name, __func__, status,
++ mac_states[priv->mac_state], priv->scan_need_any);
++
++ if (status != CMD_STATUS_COMPLETE) {
++ if ((status != CMD_STATUS_IN_PROGRESS) &&
++ (status != CMD_STATUS_IDLE))
++ printk(KERN_ERR "%s: %s: Bad scan status: %s\n",
++ priv->netdev->name, __func__,
++ at76_get_cmd_status_string(status));
++
++ /* the first cmd status after scan start is always a IDLE ->
++ start the timer to poll again until COMPLETED */
++ at76_dbg(DBG_MGMT_TIMER,
++ "%s:%d: starting mgmt_timer for %d ticks",
++ __func__, __LINE__, SCAN_POLL_INTERVAL);
++ schedule_delayed_work(&priv->dwork_get_scan,
++ SCAN_POLL_INTERVAL);
++ goto exit;
++ }
++
++ if (at76_debug & DBG_BSS_TABLE)
++ at76_dump_bss_table(priv);
++
++ if (priv->scan_need_any) {
++ ret = at76_start_scan(priv, 0);
++ if (ret < 0)
++ printk(KERN_ERR
++ "%s: %s: start_scan (ANY) failed with %d\n",
++ priv->netdev->name, __func__, ret);
++ at76_dbg(DBG_MGMT_TIMER,
++ "%s:%d: starting mgmt_timer for %d ticks", __func__,
++ __LINE__, SCAN_POLL_INTERVAL);
++ schedule_delayed_work(&priv->dwork_get_scan,
++ SCAN_POLL_INTERVAL);
++ priv->scan_need_any = 0;
++ } else {
++ priv->scan_state = SCAN_COMPLETED;
++ /* report the end of scan to user space */
++ at76_iwevent_scan_complete(priv->netdev);
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++ }
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* Handle loss of beacons from the AP */
++static void at76_dwork_beacon(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ dwork_beacon.work);
++
++ mutex_lock(&priv->mtx);
++ if (priv->mac_state != MAC_CONNECTED || priv->iw_mode != IW_MODE_INFRA)
++ goto exit;
++
++ /* We haven't received any beacons from out AP for BEACON_TIMEOUT */
++ printk(KERN_INFO "%s: lost beacon bssid %s\n",
++ priv->netdev->name, mac2str(priv->curr_bss->bssid));
++
++ netif_carrier_off(priv->netdev);
++ netif_stop_queue(priv->netdev);
++ at76_iwevent_bss_disconnect(priv->netdev);
++ at76_set_mac_state(priv, MAC_SCANNING);
++ schedule_work(&priv->work_start_scan);
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* Handle authentication response timeout */
++static void at76_dwork_auth(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ dwork_auth.work);
++
++ mutex_lock(&priv->mtx);
++ WARN_ON(priv->mac_state != MAC_AUTH);
++ if (priv->mac_state != MAC_AUTH)
++ goto exit;
++
++ at76_dbg(DBG_PROGRESS, "%s: authentication response timeout",
++ priv->netdev->name);
++
++ if (priv->retries-- >= 0) {
++ at76_auth_req(priv, priv->curr_bss, 1, NULL);
++ at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ",
++ __func__, __LINE__);
++ schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
++ } else {
++ /* try to get next matching BSS */
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++ }
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* Handle association response timeout */
++static void at76_dwork_assoc(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ dwork_assoc.work);
++
++ mutex_lock(&priv->mtx);
++ WARN_ON(priv->mac_state != MAC_ASSOC);
++ if (priv->mac_state != MAC_ASSOC)
++ goto exit;
++
++ at76_dbg(DBG_PROGRESS, "%s: association response timeout",
++ priv->netdev->name);
++
++ if (priv->retries-- >= 0) {
++ at76_assoc_req(priv, priv->curr_bss);
++ at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ",
++ __func__, __LINE__);
++ schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT);
++ } else {
++ /* try to get next matching BSS */
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++ }
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* Read new bssid in ad-hoc mode */
++static void at76_work_new_bss(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ work_new_bss);
++ int ret;
++ struct mib_mac_mgmt mac_mgmt;
++
++ mutex_lock(&priv->mtx);
++
++ ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, &mac_mgmt,
++ sizeof(struct mib_mac_mgmt));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
++ priv->netdev->name, ret);
++ goto exit;
++ }
++
++ at76_dbg(DBG_PROGRESS, "ibss_change = 0x%2x", mac_mgmt.ibss_change);
++ memcpy(priv->bssid, mac_mgmt.current_bssid, ETH_ALEN);
++ at76_dbg(DBG_PROGRESS, "using BSSID %s", mac2str(priv->bssid));
++
++ at76_iwevent_bss_connect(priv->netdev, priv->bssid);
++
++ priv->mib_buf.type = MIB_MAC_MGMT;
++ priv->mib_buf.size = 1;
++ priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change);
++ priv->mib_buf.data.byte = 0;
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n",
++ priv->netdev->name, ret);
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++static int at76_startup_device(struct at76_priv *priv)
++{
++ struct at76_card_config *ccfg = &priv->card_config;
++ int ret;
++
++ at76_dbg(DBG_PARAMS,
++ "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d "
++ "keylen %d", priv->netdev->name, priv->essid_size, priv->essid,
++ hex2str(priv->essid, IW_ESSID_MAX_SIZE),
++ priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
++ priv->channel, priv->wep_enabled ? "enabled" : "disabled",
++ priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
++ at76_dbg(DBG_PARAMS,
++ "%s param: preamble %s rts %d retry %d frag %d "
++ "txrate %s auth_mode %d", priv->netdev->name,
++ preambles[priv->preamble_type], priv->rts_threshold,
++ priv->short_retry_limit, priv->frag_threshold,
++ priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
++ TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
++ TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
++ TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
++ TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
++ at76_dbg(DBG_PARAMS,
++ "%s param: pm_mode %d pm_period %d auth_mode %s "
++ "scan_times %d %d scan_mode %s",
++ priv->netdev->name, priv->pm_mode, priv->pm_period,
++ priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
++ priv->scan_min_time, priv->scan_max_time,
++ priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
++
++ memset(ccfg, 0, sizeof(struct at76_card_config));
++ ccfg->promiscuous_mode = 0;
++ ccfg->short_retry_limit = priv->short_retry_limit;
++
++ if (priv->wep_enabled) {
++ if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
++ ccfg->encryption_type = 2;
++ else
++ ccfg->encryption_type = 1;
++
++ /* jal: always exclude unencrypted if WEP is active */
++ ccfg->exclude_unencrypted = 1;
++ } else {
++ ccfg->exclude_unencrypted = 0;
++ ccfg->encryption_type = 0;
++ }
++
++ ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
++ ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
++
++ memcpy(ccfg->basic_rate_set, hw_rates, 4);
++ /* jal: really needed, we do a set_mib for autorate later ??? */
++ ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
++ ccfg->channel = priv->channel;
++ ccfg->privacy_invoked = priv->wep_enabled;
++ memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
++ ccfg->ssid_len = priv->essid_size;
++
++ ccfg->wep_default_key_id = priv->wep_key_id;
++ memcpy(ccfg->wep_default_key_value, priv->wep_keys, 4 * WEP_KEY_LEN);
++
++ ccfg->short_preamble = priv->preamble_type;
++ ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
++
++ ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
++ sizeof(struct at76_card_config));
++ if (ret < 0) {
++ printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
++ priv->netdev->name, ret);
++ return ret;
++ }
++
++ at76_wait_completion(priv, CMD_STARTUP);
++
++ /* remove BSSID from previous run */
++ memset(priv->bssid, 0, ETH_ALEN);
++
++ if (at76_set_radio(priv, 1) == 1)
++ at76_wait_completion(priv, CMD_RADIO_ON);
++
++ ret = at76_set_preamble(priv, priv->preamble_type);
++ if (ret < 0)
++ return ret;
++
++ ret = at76_set_frag(priv, priv->frag_threshold);
++ if (ret < 0)
++ return ret;
++
++ ret = at76_set_rts(priv, priv->rts_threshold);
++ if (ret < 0)
++ return ret;
++
++ ret = at76_set_autorate_fallback(priv,
++ priv->txrate == TX_RATE_AUTO ? 1 : 0);
++ if (ret < 0)
++ return ret;
++
++ ret = at76_set_pm_mode(priv);
++ if (ret < 0)
++ return ret;
++
++ if (at76_debug & DBG_MIB) {
++ at76_dump_mib_mac(priv);
++ at76_dump_mib_mac_addr(priv);
++ at76_dump_mib_mac_mgmt(priv);
++ at76_dump_mib_mac_wep(priv);
++ at76_dump_mib_mdomain(priv);
++ at76_dump_mib_phy(priv);
++ at76_dump_mib_local(priv);
++ }
++
++ return 0;
++}
++
++/* Restart the interface */
++static void at76_dwork_restart(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ dwork_restart.work);
++
++ mutex_lock(&priv->mtx);
++
++ netif_carrier_off(priv->netdev); /* stop netdev watchdog */
++ netif_stop_queue(priv->netdev); /* stop tx data packets */
++
++ at76_startup_device(priv);
++
++ if (priv->iw_mode != IW_MODE_MONITOR) {
++ priv->netdev->type = ARPHRD_ETHER;
++ at76_set_mac_state(priv, MAC_SCANNING);
++ schedule_work(&priv->work_start_scan);
++ } else {
++ priv->netdev->type = ARPHRD_IEEE80211_RADIOTAP;
++ at76_start_monitor(priv);
++ }
++
++ mutex_unlock(&priv->mtx);
++}
++
++/* Initiate scanning */
++static void at76_work_start_scan(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ work_start_scan);
++ int ret;
++
++ mutex_lock(&priv->mtx);
++
++ WARN_ON(priv->mac_state != MAC_SCANNING);
++ if (priv->mac_state != MAC_SCANNING)
++ goto exit;
++
++ /* only clear the bss list when a scan is actively initiated,
++ * otherwise simply rely on at76_bss_list_timeout */
++ if (priv->scan_state == SCAN_IN_PROGRESS) {
++ at76_free_bss_list(priv);
++ priv->scan_need_any = 1;
++ } else
++ priv->scan_need_any = 0;
++
++ ret = at76_start_scan(priv, 1);
++
++ if (ret < 0)
++ printk(KERN_ERR "%s: %s: start_scan failed with %d\n",
++ priv->netdev->name, __func__, ret);
++ else {
++ at76_dbg(DBG_MGMT_TIMER,
++ "%s:%d: starting mgmt_timer for %d ticks",
++ __func__, __LINE__, SCAN_POLL_INTERVAL);
++ schedule_delayed_work(&priv->dwork_get_scan,
++ SCAN_POLL_INTERVAL);
++ }
++
++exit:
++ mutex_unlock(&priv->mtx);
++}
++
++/* Enable or disable promiscuous mode */
++static void at76_work_set_promisc(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ work_set_promisc);
++ int ret = 0;
++
++ mutex_lock(&priv->mtx);
++
++ priv->mib_buf.type = MIB_LOCAL;
++ priv->mib_buf.size = 1;
++ priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
++ priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
++
++ ret = at76_set_mib(priv, &priv->mib_buf);
++ if (ret < 0)
++ printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
++ priv->netdev->name, ret);
++
++ mutex_unlock(&priv->mtx);
++}
++
++/* Submit Rx urb back to the device */
++static void at76_work_submit_rx(struct work_struct *work)
++{
++ struct at76_priv *priv = container_of(work, struct at76_priv,
++ work_submit_rx);
++
++ mutex_lock(&priv->mtx);
++ at76_submit_rx_urb(priv);
++ mutex_unlock(&priv->mtx);
++}
++
++/* We got an association response */
++static void at76_rx_mgmt_assoc(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ struct ieee80211_assoc_response *resp =
++ (struct ieee80211_assoc_response *)buf->packet;
++ u16 assoc_id = le16_to_cpu(resp->aid);
++ u16 status = le16_to_cpu(resp->status);
++
++ at76_dbg(DBG_RX_MGMT, "%s: rx AssocResp bssid %s capa 0x%04x status "
++ "0x%04x assoc_id 0x%04x rates %s", priv->netdev->name,
++ mac2str(resp->header.addr3), le16_to_cpu(resp->capability),
++ status, assoc_id, hex2str(resp->info_element->data,
++ resp->info_element->len));
++
++ if (priv->mac_state != MAC_ASSOC) {
++ printk(KERN_INFO "%s: AssocResp in state %s ignored\n",
++ priv->netdev->name, mac_states[priv->mac_state]);
++ return;
++ }
++
++ BUG_ON(!priv->curr_bss);
++
++ cancel_delayed_work(&priv->dwork_assoc);
++ if (status == WLAN_STATUS_SUCCESS) {
++ struct bss_info *ptr = priv->curr_bss;
++ priv->assoc_id = assoc_id & 0x3fff;
++ /* update iwconfig params */
++ memcpy(priv->bssid, ptr->bssid, ETH_ALEN);
++ memcpy(priv->essid, ptr->ssid, ptr->ssid_len);
++ priv->essid_size = ptr->ssid_len;
++ priv->channel = ptr->channel;
++ schedule_work(&priv->work_assoc_done);
++ } else {
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++ }
++}
++
++/* Process disassociation request from the AP */
++static void at76_rx_mgmt_disassoc(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ struct ieee80211_disassoc *resp =
++ (struct ieee80211_disassoc *)buf->packet;
++ struct ieee80211_hdr_3addr *mgmt = &resp->header;
++
++ at76_dbg(DBG_RX_MGMT,
++ "%s: rx DisAssoc bssid %s reason 0x%04x destination %s",
++ priv->netdev->name, mac2str(mgmt->addr3),
++ le16_to_cpu(resp->reason), mac2str(mgmt->addr1));
++
++ /* We are not connected, ignore */
++ if (priv->mac_state == MAC_SCANNING || priv->mac_state == MAC_INIT
++ || !priv->curr_bss)
++ return;
++
++ /* Not our BSSID, ignore */
++ if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid))
++ return;
++
++ /* Not for our STA and not broadcast, ignore */
++ if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)
++ && !is_broadcast_ether_addr(mgmt->addr1))
++ return;
++
++ if (priv->mac_state != MAC_ASSOC && priv->mac_state != MAC_CONNECTED
++ && priv->mac_state != MAC_JOINING) {
++ printk(KERN_INFO "%s: DisAssoc in state %s ignored\n",
++ priv->netdev->name, mac_states[priv->mac_state]);
++ return;
++ }
++
++ if (priv->mac_state == MAC_CONNECTED) {
++ netif_carrier_off(priv->netdev);
++ netif_stop_queue(priv->netdev);
++ at76_iwevent_bss_disconnect(priv->netdev);
++ }
++ cancel_delayed_work(&priv->dwork_get_scan);
++ cancel_delayed_work(&priv->dwork_beacon);
++ cancel_delayed_work(&priv->dwork_auth);
++ cancel_delayed_work(&priv->dwork_assoc);
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++}
++
++static void at76_rx_mgmt_auth(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ struct ieee80211_auth *resp = (struct ieee80211_auth *)buf->packet;
++ struct ieee80211_hdr_3addr *mgmt = &resp->header;
++ int seq_nr = le16_to_cpu(resp->transaction);
++ int alg = le16_to_cpu(resp->algorithm);
++ int status = le16_to_cpu(resp->status);
++
++ at76_dbg(DBG_RX_MGMT,
++ "%s: rx AuthFrame bssid %s alg %d seq_nr %d status %d "
++ "destination %s", priv->netdev->name, mac2str(mgmt->addr3),
++ alg, seq_nr, status, mac2str(mgmt->addr1));
++
++ if (alg == WLAN_AUTH_SHARED_KEY && seq_nr == 2)
++ at76_dbg(DBG_RX_MGMT, "%s: AuthFrame challenge %s ...",
++ priv->netdev->name, hex2str(resp->info_element, 18));
++
++ if (priv->mac_state != MAC_AUTH) {
++ printk(KERN_INFO "%s: ignored AuthFrame in state %s\n",
++ priv->netdev->name, mac_states[priv->mac_state]);
++ return;
++ }
++ if (priv->auth_mode != alg) {
++ printk(KERN_INFO "%s: ignored AuthFrame for alg %d\n",
++ priv->netdev->name, alg);
++ return;
++ }
++
++ BUG_ON(!priv->curr_bss);
++
++ /* Not our BSSID or not for our STA, ignore */
++ if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)
++ || compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1))
++ return;
++
++ cancel_delayed_work(&priv->dwork_auth);
++ if (status != WLAN_STATUS_SUCCESS) {
++ /* try to join next bss */
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++ return;
++ }
++
++ if (priv->auth_mode == WLAN_AUTH_OPEN || seq_nr == 4) {
++ priv->retries = ASSOC_RETRIES;
++ at76_set_mac_state(priv, MAC_ASSOC);
++ at76_assoc_req(priv, priv->curr_bss);
++ at76_dbg(DBG_MGMT_TIMER,
++ "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__);
++ schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT);
++ return;
++ }
++
++ WARN_ON(seq_nr != 2);
++ at76_auth_req(priv, priv->curr_bss, seq_nr + 1, resp->info_element);
++ at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", __func__,
++ __LINE__);
++ schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
++}
++
++static void at76_rx_mgmt_deauth(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ struct ieee80211_disassoc *resp =
++ (struct ieee80211_disassoc *)buf->packet;
++ struct ieee80211_hdr_3addr *mgmt = &resp->header;
++
++ at76_dbg(DBG_RX_MGMT | DBG_PROGRESS,
++ "%s: rx DeAuth bssid %s reason 0x%04x destination %s",
++ priv->netdev->name, mac2str(mgmt->addr3),
++ le16_to_cpu(resp->reason), mac2str(mgmt->addr1));
++
++ if (priv->mac_state != MAC_AUTH && priv->mac_state != MAC_ASSOC
++ && priv->mac_state != MAC_CONNECTED) {
++ printk(KERN_INFO "%s: DeAuth in state %s ignored\n",
++ priv->netdev->name, mac_states[priv->mac_state]);
++ return;
++ }
++
++ BUG_ON(!priv->curr_bss);
++
++ /* Not our BSSID, ignore */
++ if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid))
++ return;
++
++ /* Not for our STA and not broadcast, ignore */
++ if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)
++ && !is_broadcast_ether_addr(mgmt->addr1))
++ return;
++
++ if (priv->mac_state == MAC_CONNECTED)
++ at76_iwevent_bss_disconnect(priv->netdev);
++
++ at76_set_mac_state(priv, MAC_JOINING);
++ schedule_work(&priv->work_join);
++ cancel_delayed_work(&priv->dwork_get_scan);
++ cancel_delayed_work(&priv->dwork_beacon);
++ cancel_delayed_work(&priv->dwork_auth);
++ cancel_delayed_work(&priv->dwork_assoc);
++}
++
++static void at76_rx_mgmt_beacon(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ int varpar_len;
++ /* beacon content */
++ struct ieee80211_beacon *bdata = (struct ieee80211_beacon *)buf->packet;
++ struct ieee80211_hdr_3addr *mgmt = &bdata->header;
++
++ struct list_head *lptr;
++ struct bss_info *match; /* entry matching addr3 with its bssid */
++ int new_entry = 0;
++ int len;
++ struct ieee80211_info_element *ie;
++ int have_ssid = 0;
++ int have_rates = 0;
++ int have_channel = 0;
++ int keep_going = 1;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->bss_list_spinlock, flags);
++ if (priv->mac_state == MAC_CONNECTED) {
++ /* in state MAC_CONNECTED we use the mgmt_timer to control
++ the beacon of the BSS */
++ BUG_ON(!priv->curr_bss);
++
++ if (!compare_ether_addr(priv->curr_bss->bssid, mgmt->addr3)) {
++ /* We got our AP's beacon, defer the timeout handler.
++ Kill pending work first, as schedule_delayed_work()
++ won't do it. */
++ cancel_delayed_work(&priv->dwork_beacon);
++ schedule_delayed_work(&priv->dwork_beacon,
++ BEACON_TIMEOUT);
++ priv->curr_bss->rssi = buf->rssi;
++ priv->beacons_received++;
++ goto exit;
++ }
++ }
++
++ /* look if we have this BSS already in the list */
++ match = NULL;
++
++ if (!list_empty(&priv->bss_list)) {
++ list_for_each(lptr, &priv->bss_list) {
++ struct bss_info *bss_ptr =
++ list_entry(lptr, struct bss_info, list);
++ if (!compare_ether_addr(bss_ptr->bssid, mgmt->addr3)) {
++ match = bss_ptr;
++ break;
++ }
++ }
++ }
++
++ if (!match) {
++ /* BSS not in the list - append it */
++ match = kzalloc(sizeof(struct bss_info), GFP_ATOMIC);
++ if (!match) {
++ at76_dbg(DBG_BSS_TABLE,
++ "%s: cannot kmalloc new bss info (%zd byte)",
++ priv->netdev->name, sizeof(struct bss_info));
++ goto exit;
++ }
++ new_entry = 1;
++ list_add_tail(&match->list, &priv->bss_list);
++ }
++
++ match->capa = le16_to_cpu(bdata->capability);
++ match->beacon_interval = le16_to_cpu(bdata->beacon_interval);
++ match->rssi = buf->rssi;
++ match->link_qual = buf->link_quality;
++ match->noise_level = buf->noise_level;
++ memcpy(match->bssid, mgmt->addr3, ETH_ALEN);
++ at76_dbg(DBG_RX_BEACON, "%s: bssid %s", priv->netdev->name,
++ mac2str(match->bssid));
++
++ ie = bdata->info_element;
++
++ /* length of var length beacon parameters */
++ varpar_len = min_t(int, le16_to_cpu(buf->wlength) -
++ sizeof(struct ieee80211_beacon),
++ BEACON_MAX_DATA_LENGTH);
++
++ /* This routine steps through the bdata->data array to get
++ * some useful information about the access point.
++ * Currently, this implementation supports receipt of: SSID,
++ * supported transfer rates and channel, in any order, with some
++ * tolerance for intermittent unknown codes (although this
++ * functionality may not be necessary as the useful information will
++ * usually arrive in consecutively, but there have been some
++ * reports of some of the useful information fields arriving in a
++ * different order).
++ * It does not support any more IE types although MFIE_TYPE_TIM may
++ * be supported (on my AP at least).
++ * The bdata->data array is about 1500 bytes long but only ~36 of those
++ * bytes are useful, hence the have_ssid etc optimizations. */
++
++ while (keep_going &&
++ ((&ie->data[ie->len] - (u8 *)bdata->info_element) <=
++ varpar_len)) {
++
++ switch (ie->id) {
++
++ case MFIE_TYPE_SSID:
++ if (have_ssid)
++ break;
++
++ len = min_t(int, IW_ESSID_MAX_SIZE, ie->len);
++
++ /* we copy only if this is a new entry,
++ or the incoming SSID is not a hidden SSID. This
++ will protect us from overwriting a real SSID read
++ in a ProbeResponse with a hidden one from a
++ following beacon. */
++ if (!new_entry && at76_is_hidden_ssid(ie->data, len)) {
++ have_ssid = 1;
++ break;
++ }
++
++ match->ssid_len = len;
++ memcpy(match->ssid, ie->data, len);
++ at76_dbg(DBG_RX_BEACON, "%s: SSID - %.*s",
++ priv->netdev->name, len, match->ssid);
++ have_ssid = 1;
++ break;
++
++ case MFIE_TYPE_RATES:
++ if (have_rates)
++ break;
++
++ match->rates_len =
++ min_t(int, sizeof(match->rates), ie->len);
++ memcpy(match->rates, ie->data, match->rates_len);
++ have_rates = 1;
++ at76_dbg(DBG_RX_BEACON, "%s: SUPPORTED RATES %s",
++ priv->netdev->name,
++ hex2str(ie->data, ie->len));
++ break;
++
++ case MFIE_TYPE_DS_SET:
++ if (have_channel)
++ break;
++
++ match->channel = ie->data[0];
++ have_channel = 1;
++ at76_dbg(DBG_RX_BEACON, "%s: CHANNEL - %d",
++ priv->netdev->name, match->channel);
++ break;
++
++ case MFIE_TYPE_CF_SET:
++ case MFIE_TYPE_TIM:
++ case MFIE_TYPE_IBSS_SET:
++ default:
++ at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s",
++ priv->netdev->name, ie->id, ie->len,
++ hex2str(ie->data, ie->len));
++ break;
++ }
++
++ /* advance to the next informational element */
++ next_ie(&ie);
++
++ /* Optimization: after all, the bdata->data array is
++ * varpar_len bytes long, whereas we get all of the useful
++ * information after only ~36 bytes, this saves us a lot of
++ * time (and trouble as the remaining portion of the array
++ * could be full of junk)
++ * Comment this out if you want to see what other information
++ * comes from the AP - although little of it may be useful */
++ }
++
++ at76_dbg(DBG_RX_BEACON, "%s: Finished processing beacon data",
++ priv->netdev->name);
++
++ match->last_rx = jiffies; /* record last rx of beacon */
++
++exit:
++ spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++}
++
++/* Calculate the link level from a given rx_buffer */
++static void at76_calc_level(struct at76_priv *priv, struct at76_rx_buffer *buf,
++ struct iw_quality *qual)
++{
++ /* just a guess for now, might be different for other chips */
++ int max_rssi = 42;
++
++ qual->level = (buf->rssi * 100 / max_rssi);
++ if (qual->level > 100)
++ qual->level = 100;
++ qual->updated |= IW_QUAL_LEVEL_UPDATED;
++}
++
++/* Calculate the link quality from a given rx_buffer */
++static void at76_calc_qual(struct at76_priv *priv, struct at76_rx_buffer *buf,
++ struct iw_quality *qual)
++{
++ if (at76_is_intersil(priv->board_type))
++ qual->qual = buf->link_quality;
++ else {
++ unsigned long elapsed;
++
++ /* Update qual at most once a second */
++ elapsed = jiffies - priv->beacons_last_qual;
++ if (elapsed < 1 * HZ)
++ return;
++
++ qual->qual = qual->level * priv->beacons_received *
++ msecs_to_jiffies(priv->beacon_period) / elapsed;
++
++ priv->beacons_last_qual = jiffies;
++ priv->beacons_received = 0;
++ }
++ qual->qual = (qual->qual > 100) ? 100 : qual->qual;
++ qual->updated |= IW_QUAL_QUAL_UPDATED;
++}
++
++/* Calculate the noise quality from a given rx_buffer */
++static void at76_calc_noise(struct at76_priv *priv, struct at76_rx_buffer *buf,
++ struct iw_quality *qual)
++{
++ qual->noise = 0;
++ qual->updated |= IW_QUAL_NOISE_INVALID;
++}
++
++static void at76_update_wstats(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ struct iw_quality *qual = &priv->wstats.qual;
++
++ if (buf->rssi && priv->mac_state == MAC_CONNECTED) {
++ qual->updated = 0;
++ at76_calc_level(priv, buf, qual);
++ at76_calc_qual(priv, buf, qual);
++ at76_calc_noise(priv, buf, qual);
++ } else {
++ qual->qual = 0;
++ qual->level = 0;
++ qual->noise = 0;
++ qual->updated = IW_QUAL_ALL_INVALID;
++ }
++}
++
++static void at76_rx_mgmt(struct at76_priv *priv, struct at76_rx_buffer *buf)
++{
++ struct ieee80211_hdr_3addr *mgmt =
++ (struct ieee80211_hdr_3addr *)buf->packet;
++ u16 framectl = le16_to_cpu(mgmt->frame_ctl);
++
++ /* update wstats */
++ if (priv->mac_state != MAC_INIT && priv->mac_state != MAC_SCANNING) {
++ /* jal: this is a dirty hack needed by Tim in ad-hoc mode */
++ /* Data packets always seem to have a 0 link level, so we
++ only read link quality info from management packets.
++ Atmel driver actually averages the present, and previous
++ values, we just present the raw value at the moment - TJS */
++ if (priv->iw_mode == IW_MODE_ADHOC
++ || (priv->curr_bss
++ && !compare_ether_addr(mgmt->addr3,
++ priv->curr_bss->bssid)))
++ at76_update_wstats(priv, buf);
++ }
++
++ at76_dbg(DBG_RX_MGMT_CONTENT, "%s rx mgmt framectl 0x%x %s",
++ priv->netdev->name, framectl,
++ hex2str(mgmt, le16_to_cpu(buf->wlength)));
++
++ switch (framectl & IEEE80211_FCTL_STYPE) {
++ case IEEE80211_STYPE_BEACON:
++ case IEEE80211_STYPE_PROBE_RESP:
++ at76_rx_mgmt_beacon(priv, buf);
++ break;
++
++ case IEEE80211_STYPE_ASSOC_RESP:
++ at76_rx_mgmt_assoc(priv, buf);
++ break;
++
++ case IEEE80211_STYPE_DISASSOC:
++ at76_rx_mgmt_disassoc(priv, buf);
++ break;
++
++ case IEEE80211_STYPE_AUTH:
++ at76_rx_mgmt_auth(priv, buf);
++ break;
++
++ case IEEE80211_STYPE_DEAUTH:
++ at76_rx_mgmt_deauth(priv, buf);
++ break;
++
++ default:
++ printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n",
++ priv->netdev->name, framectl);
++ }
++
++ return;
++}
++
++/* Convert the 802.11 header into an ethernet-style header, make skb
++ * ready for consumption by netif_rx() */
++static void at76_ieee80211_to_eth(struct sk_buff *skb, int iw_mode)
++{
++ struct ieee80211_hdr_3addr *i802_11_hdr;
++ struct ethhdr *eth_hdr_p;
++ u8 *src_addr;
++ u8 *dest_addr;
++
++ i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data;
++
++ /* That would be the ethernet header if the hardware converted
++ * the frame for us. Make sure the source and the destination
++ * match the 802.11 header. Which hardware does it? */
++ eth_hdr_p = (struct ethhdr *)skb_pull(skb, IEEE80211_3ADDR_LEN);
++
++ dest_addr = i802_11_hdr->addr1;
++ if (iw_mode == IW_MODE_ADHOC)
++ src_addr = i802_11_hdr->addr2;
++ else
++ src_addr = i802_11_hdr->addr3;
++
++ if (!compare_ether_addr(eth_hdr_p->h_source, src_addr) &&
++ !compare_ether_addr(eth_hdr_p->h_dest, dest_addr))
++ /* Yes, we already have an ethernet header */
++ skb_reset_mac_header(skb);
++ else {
++ u16 len;
++
++ /* Need to build an ethernet header */
++ if (!memcmp(skb->data, snapsig, sizeof(snapsig))) {
++ /* SNAP frame - decapsulate, keep proto */
++ skb_push(skb, offsetof(struct ethhdr, h_proto) -
++ sizeof(rfc1042sig));
++ len = 0;
++ } else {
++ /* 802.3 frame, proto is length */
++ len = skb->len;
++ skb_push(skb, ETH_HLEN);
++ }
++
++ skb_reset_mac_header(skb);
++ eth_hdr_p = eth_hdr(skb);
++ /* This needs to be done in this order (eth_hdr_p->h_dest may
++ * overlap src_addr) */
++ memcpy(eth_hdr_p->h_source, src_addr, ETH_ALEN);
++ memcpy(eth_hdr_p->h_dest, dest_addr, ETH_ALEN);
++ if (len)
++ eth_hdr_p->h_proto = htons(len);
++ }
++
++ skb->protocol = eth_type_trans(skb, skb->dev);
++}
++
++/* Check for fragmented data in priv->rx_skb. If the packet was no fragment
++ or it was the last of a fragment set a skb containing the whole packet
++ is returned for further processing. Otherwise we get NULL and are
++ done and the packet is either stored inside the fragment buffer
++ or thrown away. Every returned skb starts with the ieee802_11 header
++ and contains _no_ FCS at the end */
++static struct sk_buff *at76_check_for_rx_frags(struct at76_priv *priv)
++{
++ struct sk_buff *skb = priv->rx_skb;
++ struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data;
++ struct ieee80211_hdr_3addr *i802_11_hdr =
++ (struct ieee80211_hdr_3addr *)buf->packet;
++ /* seq_ctrl, fragment_number, sequence number of new packet */
++ u16 sctl = le16_to_cpu(i802_11_hdr->seq_ctl);
++ u16 fragnr = sctl & 0xf;
++ u16 seqnr = sctl >> 4;
++ u16 frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl);
++
++ /* Length including the IEEE802.11 header, but without the trailing
++ * FCS and without the Atmel Rx header */
++ int length = le16_to_cpu(buf->wlength) - IEEE80211_FCS_LEN;
++
++ /* where does the data payload start in skb->data ? */
++ u8 *data = i802_11_hdr->payload;
++
++ /* length of payload, excl. the trailing FCS */
++ int data_len = length - IEEE80211_3ADDR_LEN;
++
++ int i;
++ struct rx_data_buf *bptr, *optr;
++ unsigned long oldest = ~0UL;
++
++ at76_dbg(DBG_RX_FRAGS,
++ "%s: rx data frame_ctl %04x addr2 %s seq/frag %d/%d "
++ "length %d data %d: %s ...", priv->netdev->name, frame_ctl,
++ mac2str(i802_11_hdr->addr2), seqnr, fragnr, length, data_len,
++ hex2str(data, 32));
++
++ at76_dbg(DBG_RX_FRAGS_SKB, "%s: incoming skb: head %p data %p "
++ "tail %p end %p len %d", priv->netdev->name, skb->head,
++ skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
++ skb->len);
++
++ if (data_len < 0) {
++ /* make sure data starts in the buffer */
++ printk(KERN_INFO "%s: data frame too short\n",
++ priv->netdev->name);
++ return NULL;
++ }
++
++ WARN_ON(length <= AT76_RX_HDRLEN);
++ if (length <= AT76_RX_HDRLEN)
++ return NULL;
++
++ /* remove the at76_rx_buffer header - we don't need it anymore */
++ /* we need the IEEE802.11 header (for the addresses) if this packet
++ is the first of a chain */
++ skb_pull(skb, AT76_RX_HDRLEN);
++
++ /* remove FCS at end */
++ skb_trim(skb, length);
++
++ at76_dbg(DBG_RX_FRAGS_SKB, "%s: trimmed skb: head %p data %p tail %p "
++ "end %p len %d data %p data_len %d", priv->netdev->name,
++ skb->head, skb->data, skb_tail_pointer(skb),
++ skb_end_pointer(skb), skb->len, data, data_len);
++
++ if (fragnr == 0 && !(frame_ctl & IEEE80211_FCTL_MOREFRAGS)) {
++ /* unfragmented packet received */
++ /* Use a new skb for the next receive */
++ priv->rx_skb = NULL;
++ at76_dbg(DBG_RX_FRAGS, "%s: unfragmented", priv->netdev->name);
++ return skb;
++ }
++
++ /* look if we've got a chain for the sender address.
++ afterwards optr points to first free or the oldest entry,
++ or, if i < NR_RX_DATA_BUF, bptr points to the entry for the
++ sender address */
++ /* determining the oldest entry doesn't cope with jiffies wrapping
++ but I don't care to delete a young entry at these rare moments ... */
++
++ bptr = priv->rx_data;
++ optr = NULL;
++ for (i = 0; i < NR_RX_DATA_BUF; i++, bptr++) {
++ if (!bptr->skb) {
++ optr = bptr;
++ oldest = 0UL;
++ continue;
++ }
++
++ if (!compare_ether_addr(i802_11_hdr->addr2, bptr->sender))
++ break;
++
++ if (!optr) {
++ optr = bptr;
++ oldest = bptr->last_rx;
++ } else if (bptr->last_rx < oldest)
++ optr = bptr;
++ }
++
++ if (i < NR_RX_DATA_BUF) {
++
++ at76_dbg(DBG_RX_FRAGS, "%s: %d. cacheentry (seq/frag = %d/%d) "
++ "matched sender addr",
++ priv->netdev->name, i, bptr->seqnr, bptr->fragnr);
++
++ /* bptr points to an entry for the sender address */
++ if (bptr->seqnr == seqnr) {
++ int left;
++ /* the fragment has the current sequence number */
++ if (((bptr->fragnr + 1) & 0xf) != fragnr) {
++ /* wrong fragment number -> ignore it */
++ /* is & 0xf necessary above ??? */
++ at76_dbg(DBG_RX_FRAGS,
++ "%s: frag nr mismatch: %d + 1 != %d",
++ priv->netdev->name, bptr->fragnr,
++ fragnr);
++ return NULL;
++ }
++ bptr->last_rx = jiffies;
++ /* the next following fragment number ->
++ add the data at the end */
++
++ /* for test only ??? */
++ left = skb_tailroom(bptr->skb);
++ if (left < data_len)
++ printk(KERN_INFO
++ "%s: only %d byte free (need %d)\n",
++ priv->netdev->name, left, data_len);
++ else
++ memcpy(skb_put(bptr->skb, data_len), data,
++ data_len);
++
++ bptr->fragnr = fragnr;
++ if (frame_ctl & IEEE80211_FCTL_MOREFRAGS)
++ return NULL;
++
++ /* this was the last fragment - send it */
++ skb = bptr->skb;
++ bptr->skb = NULL; /* free the entry */
++ at76_dbg(DBG_RX_FRAGS, "%s: last frag of seq %d",
++ priv->netdev->name, seqnr);
++ return skb;
++ }
++
++ /* got another sequence number */
++ if (fragnr == 0) {
++ /* it's the start of a new chain - replace the
++ old one by this */
++ /* bptr->sender has the correct value already */
++ at76_dbg(DBG_RX_FRAGS,
++ "%s: start of new seq %d, removing old seq %d",
++ priv->netdev->name, seqnr, bptr->seqnr);
++ bptr->seqnr = seqnr;
++ bptr->fragnr = 0;
++ bptr->last_rx = jiffies;
++ /* swap bptr->skb and priv->rx_skb */
++ skb = bptr->skb;
++ bptr->skb = priv->rx_skb;
++ priv->rx_skb = skb;
++ } else {
++ /* it from the middle of a new chain ->
++ delete the old entry and skip the new one */
++ at76_dbg(DBG_RX_FRAGS,
++ "%s: middle of new seq %d (%d) "
++ "removing old seq %d",
++ priv->netdev->name, seqnr, fragnr,
++ bptr->seqnr);
++ dev_kfree_skb(bptr->skb);
++ bptr->skb = NULL;
++ }
++ return NULL;
++ }
++
++ /* if we didn't find a chain for the sender address, optr
++ points either to the first free or the oldest entry */
++
++ if (fragnr != 0) {
++ /* this is not the begin of a fragment chain ... */
++ at76_dbg(DBG_RX_FRAGS,
++ "%s: no chain for non-first fragment (%d)",
++ priv->netdev->name, fragnr);
++ return NULL;
++ }
++
++ BUG_ON(!optr);
++ if (optr->skb) {
++ /* swap the skb's */
++ skb = optr->skb;
++ optr->skb = priv->rx_skb;
++ priv->rx_skb = skb;
++
++ at76_dbg(DBG_RX_FRAGS,
++ "%s: free old contents: sender %s seq/frag %d/%d",
++ priv->netdev->name, mac2str(optr->sender),
++ optr->seqnr, optr->fragnr);
++
++ } else {
++ /* take the skb from priv->rx_skb */
++ optr->skb = priv->rx_skb;
++ /* let at76_submit_rx_urb() allocate a new skb */
++ priv->rx_skb = NULL;
++
++ at76_dbg(DBG_RX_FRAGS, "%s: use a free entry",
++ priv->netdev->name);
++ }
++ memcpy(optr->sender, i802_11_hdr->addr2, ETH_ALEN);
++ optr->seqnr = seqnr;
++ optr->fragnr = 0;
++ optr->last_rx = jiffies;
++
++ return NULL;
++}
++
++/* Rx interrupt: we expect the complete data buffer in priv->rx_skb */
++static void at76_rx_data(struct at76_priv *priv)
++{
++ struct net_device *netdev = priv->netdev;
++ struct net_device_stats *stats = &priv->stats;
++ struct sk_buff *skb = priv->rx_skb;
++ struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data;
++ struct ieee80211_hdr_3addr *i802_11_hdr;
++ int length = le16_to_cpu(buf->wlength);
++
++ at76_dbg(DBG_RX_DATA, "%s received data packet: %s", netdev->name,
++ hex2str(skb->data, AT76_RX_HDRLEN));
++
++ at76_dbg(DBG_RX_DATA_CONTENT, "rx packet: %s",
++ hex2str(skb->data + AT76_RX_HDRLEN, length));
++
++ skb = at76_check_for_rx_frags(priv);
++ if (!skb)
++ return;
++
++ /* Atmel header and the FCS are already removed */
++ i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data;
++
++ skb->dev = netdev;
++ skb->ip_summed = CHECKSUM_NONE; /* TODO: should check CRC */
++
++ if (is_broadcast_ether_addr(i802_11_hdr->addr1)) {
++ if (!compare_ether_addr(i802_11_hdr->addr1, netdev->broadcast))
++ skb->pkt_type = PACKET_BROADCAST;
++ else
++ skb->pkt_type = PACKET_MULTICAST;
++ } else if (compare_ether_addr(i802_11_hdr->addr1, netdev->dev_addr))
++ skb->pkt_type = PACKET_OTHERHOST;
++
++ at76_ieee80211_to_eth(skb, priv->iw_mode);
++
++ netdev->last_rx = jiffies;
++ netif_rx(skb);
++ stats->rx_packets++;
++ stats->rx_bytes += length;
++
++ return;
++}
++
++static void at76_rx_monitor_mode(struct at76_priv *priv)
++{
++ struct at76_rx_radiotap *rt;
++ u8 *payload;
++ int skblen;
++ struct net_device *netdev = priv->netdev;
++ struct at76_rx_buffer *buf =
++ (struct at76_rx_buffer *)priv->rx_skb->data;
++ /* length including the IEEE802.11 header and the trailing FCS,
++ but not at76_rx_buffer */
++ int length = le16_to_cpu(buf->wlength);
++ struct sk_buff *skb = priv->rx_skb;
++ struct net_device_stats *stats = &priv->stats;
++
++ if (length < IEEE80211_FCS_LEN) {
++ /* buffer contains no data */
++ at76_dbg(DBG_MONITOR_MODE,
++ "%s: MONITOR MODE: rx skb without data",
++ priv->netdev->name);
++ return;
++ }
++
++ skblen = sizeof(struct at76_rx_radiotap) + length;
++
++ skb = dev_alloc_skb(skblen);
++ if (!skb) {
++ printk(KERN_ERR "%s: MONITOR MODE: dev_alloc_skb for radiotap "
++ "header returned NULL\n", priv->netdev->name);
++ return;
++ }
++
++ skb_put(skb, skblen);
++
++ rt = (struct at76_rx_radiotap *)skb->data;
++ payload = skb->data + sizeof(struct at76_rx_radiotap);
++
++ rt->rt_hdr.it_version = 0;
++ rt->rt_hdr.it_pad = 0;
++ rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct at76_rx_radiotap));
++ rt->rt_hdr.it_present = cpu_to_le32(AT76_RX_RADIOTAP_PRESENT);
++
++ rt->rt_tsft = cpu_to_le64(le32_to_cpu(buf->rx_time));
++ rt->rt_rate = hw_rates[buf->rx_rate] & (~0x80);
++ rt->rt_signal = buf->rssi;
++ rt->rt_noise = buf->noise_level;
++ rt->rt_flags = IEEE80211_RADIOTAP_F_FCS;
++ if (buf->fragmentation)
++ rt->rt_flags |= IEEE80211_RADIOTAP_F_FRAG;
++
++ memcpy(payload, buf->packet, length);
++ skb->dev = netdev;
++ skb->ip_summed = CHECKSUM_NONE;
++ skb_reset_mac_header(skb);
++ skb->pkt_type = PACKET_OTHERHOST;
++ skb->protocol = htons(ETH_P_802_2);
++
++ netdev->last_rx = jiffies;
++ netif_rx(skb);
++ stats->rx_packets++;
++ stats->rx_bytes += length;
++}
++
++/* Check if we spy on the sender address in buf and update stats */
++static void at76_iwspy_update(struct at76_priv *priv,
++ struct at76_rx_buffer *buf)
++{
++ struct ieee80211_hdr_3addr *hdr =
++ (struct ieee80211_hdr_3addr *)buf->packet;
++ struct iw_quality qual;
++
++ /* We can only set the level here */
++ qual.updated = IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID;
++ qual.level = 0;
++ qual.noise = 0;
++ at76_calc_level(priv, buf, &qual);
++
++ spin_lock_bh(&priv->spy_spinlock);
++
++ if (priv->spy_data.spy_number > 0)
++ wireless_spy_update(priv->netdev, hdr->addr2, &qual);
++
++ spin_unlock_bh(&priv->spy_spinlock);
++}
++
++static void at76_rx_tasklet(unsigned long param)
++{
++ struct urb *urb = (struct urb *)param;
++ struct at76_priv *priv = urb->context;
++ struct net_device *netdev = priv->netdev;
++ struct at76_rx_buffer *buf;
++ struct ieee80211_hdr_3addr *i802_11_hdr;
++ u16 frame_ctl;
++
++ if (priv->device_unplugged) {
++ at76_dbg(DBG_DEVSTART, "device unplugged");
++ if (urb)
++ at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
++ return;
++ }
++
++ if (!priv->rx_skb || !netdev || !priv->rx_skb->data)
++ return;
++
++ buf = (struct at76_rx_buffer *)priv->rx_skb->data;
++
++ i802_11_hdr = (struct ieee80211_hdr_3addr *)buf->packet;
++
++ frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl);
++
++ if (urb->status != 0) {
++ if (urb->status != -ENOENT && urb->status != -ECONNRESET)
++ at76_dbg(DBG_URB,
++ "%s %s: - nonzero Rx bulk status received: %d",
++ __func__, netdev->name, urb->status);
++ return;
++ }
++
++ at76_dbg(DBG_RX_ATMEL_HDR,
++ "%s: rx frame: rate %d rssi %d noise %d link %d %s",
++ priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level,
++ buf->link_quality, hex2str(i802_11_hdr, 48));
++ if (priv->iw_mode == IW_MODE_MONITOR) {
++ at76_rx_monitor_mode(priv);
++ goto exit;
++ }
++
++ /* there is a new bssid around, accept it: */
++ if (buf->newbss && priv->iw_mode == IW_MODE_ADHOC) {
++ at76_dbg(DBG_PROGRESS, "%s: rx newbss", netdev->name);
++ schedule_work(&priv->work_new_bss);
++ }
++
++ switch (frame_ctl & IEEE80211_FCTL_FTYPE) {
++ case IEEE80211_FTYPE_DATA:
++ at76_rx_data(priv);
++ break;
++
++ case IEEE80211_FTYPE_MGMT:
++ /* jal: TODO: find out if we can update iwspy also on
++ other frames than management (might depend on the
++ radio chip / firmware version !) */
++
++ at76_iwspy_update(priv, buf);
++
++ at76_rx_mgmt(priv, buf);
++ break;
++
++ case IEEE80211_FTYPE_CTL:
++ at76_dbg(DBG_RX_CTRL, "%s: ignored ctrl frame: %04x",
++ priv->netdev->name, frame_ctl);
++ break;
++
++ default:
++ printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n",
++ priv->netdev->name, frame_ctl);
++ }
++exit:
++ at76_submit_rx_urb(priv);
++}
++
++/* Load firmware into kernel memory and parse it */
++static struct fwentry *at76_load_firmware(struct usb_device *udev,
++ enum board_type board_type)
++{
++ int ret;
++ char *str;
++ struct at76_fw_header *fwh;
++ struct fwentry *fwe = &firmwares[board_type];
++
++ mutex_lock(&fw_mutex);
++
++ if (fwe->loaded) {
++ at76_dbg(DBG_FW, "re-using previously loaded fw");
++ goto exit;
++ }
++
++ at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
++ ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
++ fwe->fwname);
++ dev_printk(KERN_ERR, &udev->dev,
++ "you may need to download the firmware from "
++ "http://developer.berlios.de/projects/at76c503a/");
++ goto exit;
++ }
++
++ at76_dbg(DBG_FW, "got it.");
++ fwh = (struct at76_fw_header *)(fwe->fw->data);
++
++ if (fwe->fw->size <= sizeof(*fwh)) {
++ dev_printk(KERN_ERR, &udev->dev,
++ "firmware is too short (0x%zx)\n", fwe->fw->size);
++ goto exit;
++ }
++
++ /* CRC currently not checked */
++ fwe->board_type = le32_to_cpu(fwh->board_type);
++ if (fwe->board_type != board_type) {
++ dev_printk(KERN_ERR, &udev->dev,
++ "board type mismatch, requested %u, got %u\n",
++ board_type, fwe->board_type);
++ goto exit;
++ }
++
++ fwe->fw_version.major = fwh->major;
++ fwe->fw_version.minor = fwh->minor;
++ fwe->fw_version.patch = fwh->patch;
++ fwe->fw_version.build = fwh->build;
++
++ str = (char *)fwh + le32_to_cpu(fwh->str_offset);
++ fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
++ fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
++ fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
++ fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
++
++ fwe->loaded = 1;
++
++ dev_printk(KERN_DEBUG, &udev->dev,
++ "using firmware %s (version %d.%d.%d-%d)\n",
++ fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
++
++ at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
++ le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
++ le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
++ at76_dbg(DBG_DEVSTART, "firmware id %s", str);
++
++exit:
++ mutex_unlock(&fw_mutex);
++
++ if (fwe->loaded)
++ return fwe;
++ else
++ return NULL;
++}
++
++/* Allocate network device and initialize private data */
++static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
++{
++ struct net_device *netdev;
++ struct at76_priv *priv;
++ int i;
++
++ /* allocate memory for our device state and initialize it */
++ netdev = alloc_etherdev(sizeof(struct at76_priv));
++ if (!netdev) {
++ dev_printk(KERN_ERR, &udev->dev, "out of memory\n");
++ return NULL;
++ }
++
++ priv = netdev_priv(netdev);
++
++ priv->udev = udev;
++ priv->netdev = netdev;
++
++ mutex_init(&priv->mtx);
++ INIT_WORK(&priv->work_assoc_done, at76_work_assoc_done);
++ INIT_WORK(&priv->work_join, at76_work_join);
++ INIT_WORK(&priv->work_new_bss, at76_work_new_bss);
++ INIT_WORK(&priv->work_start_scan, at76_work_start_scan);
++ INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
++ INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
++ INIT_DELAYED_WORK(&priv->dwork_restart, at76_dwork_restart);
++ INIT_DELAYED_WORK(&priv->dwork_get_scan, at76_dwork_get_scan);
++ INIT_DELAYED_WORK(&priv->dwork_beacon, at76_dwork_beacon);
++ INIT_DELAYED_WORK(&priv->dwork_auth, at76_dwork_auth);
++ INIT_DELAYED_WORK(&priv->dwork_assoc, at76_dwork_assoc);
++
++ spin_lock_init(&priv->mgmt_spinlock);
++ priv->next_mgmt_bulk = NULL;
++ priv->mac_state = MAC_INIT;
++
++ /* initialize empty BSS list */
++ priv->curr_bss = NULL;
++ INIT_LIST_HEAD(&priv->bss_list);
++ spin_lock_init(&priv->bss_list_spinlock);
++
++ init_timer(&priv->bss_list_timer);
++ priv->bss_list_timer.data = (unsigned long)priv;
++ priv->bss_list_timer.function = at76_bss_list_timeout;
++
++ spin_lock_init(&priv->spy_spinlock);
++
++ /* mark all rx data entries as unused */
++ for (i = 0; i < NR_RX_DATA_BUF; i++)
++ priv->rx_data[i].skb = NULL;
++
++ priv->rx_tasklet.func = at76_rx_tasklet;
++ priv->rx_tasklet.data = 0;
++
++ priv->pm_mode = AT76_PM_OFF;
++ priv->pm_period = 0;
++
++ return priv;
++}
++
++static int at76_alloc_urbs(struct at76_priv *priv,
++ struct usb_interface *interface)
++{
++ struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
++ int i;
++ int buffer_size;
++ struct usb_host_interface *iface_desc;
++
++ at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
++
++ at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
++ interface->altsetting[0].desc.bNumEndpoints);
++
++ ep_in = NULL;
++ ep_out = NULL;
++ iface_desc = interface->cur_altsetting;
++ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
++ endpoint = &iface_desc->endpoint[i].desc;
++
++ at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
++ __func__, i, endpoint->bEndpointAddress,
++ endpoint->bmAttributes);
++
++ if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
++ ep_in = endpoint;
++
++ if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
++ ep_out = endpoint;
++ }
++
++ if (!ep_in || !ep_out) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "bulk endpoints missing\n");
++ return -ENXIO;
++ }
++
++ priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
++ priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
++
++ priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
++ priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
++ if (!priv->rx_urb || !priv->tx_urb) {
++ dev_printk(KERN_ERR, &interface->dev, "cannot allocate URB\n");
++ return -ENOMEM;
++ }
++
++ buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
++ priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
++ if (!priv->bulk_out_buffer) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "cannot allocate output buffer\n");
++ return -ENOMEM;
++ }
++
++ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
++
++ return 0;
++}
++
++/* Register network device and initialize the hardware */
++static int at76_init_new_device(struct at76_priv *priv,
++ struct usb_interface *interface)
++{
++ struct net_device *netdev = priv->netdev;
++ int ret;
++
++ /* set up the endpoint information */
++ /* check out the endpoints */
++
++ at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
++ interface->cur_altsetting->desc.bNumEndpoints);
++
++ ret = at76_alloc_urbs(priv, interface);
++ if (ret < 0)
++ goto exit;
++
++ /* MAC address */
++ ret = at76_get_hw_config(priv);
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "cannot get MAC address\n");
++ goto exit;
++ }
++
++ priv->domain = at76_get_reg_domain(priv->regulatory_domain);
++ /* init. netdev->dev_addr */
++ memcpy(netdev->dev_addr, priv->mac_addr, ETH_ALEN);
++
++ priv->channel = DEF_CHANNEL;
++ priv->iw_mode = IW_MODE_INFRA;
++ priv->rts_threshold = DEF_RTS_THRESHOLD;
++ priv->frag_threshold = DEF_FRAG_THRESHOLD;
++ priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
++ priv->txrate = TX_RATE_AUTO;
++ priv->preamble_type = PREAMBLE_TYPE_LONG;
++ priv->beacon_period = 100;
++ priv->beacons_last_qual = jiffies;
++ priv->auth_mode = WLAN_AUTH_OPEN;
++ priv->scan_min_time = DEF_SCAN_MIN_TIME;
++ priv->scan_max_time = DEF_SCAN_MAX_TIME;
++ priv->scan_mode = SCAN_TYPE_ACTIVE;
++
++ netdev->flags &= ~IFF_MULTICAST; /* not yet or never */
++ netdev->open = at76_open;
++ netdev->stop = at76_stop;
++ netdev->get_stats = at76_get_stats;
++ netdev->ethtool_ops = &at76_ethtool_ops;
++
++ /* Add pointers to enable iwspy support. */
++ priv->wireless_data.spy_data = &priv->spy_data;
++ netdev->wireless_data = &priv->wireless_data;
++
++ netdev->hard_start_xmit = at76_tx;
++ netdev->tx_timeout = at76_tx_timeout;
++ netdev->watchdog_timeo = 2 * HZ;
++ netdev->wireless_handlers = &at76_handler_def;
++ netdev->set_multicast_list = at76_set_multicast;
++ netdev->set_mac_address = at76_set_mac_address;
++ dev_alloc_name(netdev, "wlan%d");
++
++ ret = register_netdev(priv->netdev);
++ if (ret) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "cannot register netdevice (status %d)!\n", ret);
++ goto exit;
++ }
++ priv->netdev_registered = 1;
++
++ printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
++ netdev->name, interface->dev.bus_id, mac2str(priv->mac_addr),
++ priv->fw_version.major, priv->fw_version.minor,
++ priv->fw_version.patch, priv->fw_version.build);
++ printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", netdev->name,
++ priv->regulatory_domain, priv->domain->name);
++
++ /* we let this timer run the whole time this driver instance lives */
++ mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT);
++
++exit:
++ return ret;
++}
++
++static void at76_delete_device(struct at76_priv *priv)
++{
++ int i;
++
++ at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
++
++ /* The device is gone, don't bother turning it off */
++ priv->device_unplugged = 1;
++
++ if (priv->netdev_registered)
++ unregister_netdev(priv->netdev);
++
++ /* assuming we used keventd, it must quiesce too */
++ flush_scheduled_work();
++
++ kfree(priv->bulk_out_buffer);
++
++ if (priv->tx_urb) {
++ usb_kill_urb(priv->tx_urb);
++ usb_free_urb(priv->tx_urb);
++ }
++ if (priv->rx_urb) {
++ usb_kill_urb(priv->rx_urb);
++ usb_free_urb(priv->rx_urb);
++ }
++
++ at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
++
++ if (priv->rx_skb)
++ kfree_skb(priv->rx_skb);
++
++ at76_free_bss_list(priv);
++ del_timer_sync(&priv->bss_list_timer);
++ cancel_delayed_work(&priv->dwork_get_scan);
++ cancel_delayed_work(&priv->dwork_beacon);
++ cancel_delayed_work(&priv->dwork_auth);
++ cancel_delayed_work(&priv->dwork_assoc);
++
++ if (priv->mac_state == MAC_CONNECTED)
++ at76_iwevent_bss_disconnect(priv->netdev);
++
++ for (i = 0; i < NR_RX_DATA_BUF; i++)
++ if (priv->rx_data[i].skb) {
++ dev_kfree_skb(priv->rx_data[i].skb);
++ priv->rx_data[i].skb = NULL;
++ }
++ usb_put_dev(priv->udev);
++
++ at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/netdev", __func__);
++ free_netdev(priv->netdev); /* priv is in netdev */
++
++ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
++}
++
++static int at76_probe(struct usb_interface *interface,
++ const struct usb_device_id *id)
++{
++ int ret;
++ struct at76_priv *priv;
++ struct fwentry *fwe;
++ struct usb_device *udev;
++ int op_mode;
++ int need_ext_fw = 0;
++ struct mib_fw_version fwv;
++ int board_type = (int)id->driver_info;
++
++ udev = usb_get_dev(interface_to_usbdev(interface));
++
++ /* Load firmware into kernel memory */
++ fwe = at76_load_firmware(udev, board_type);
++ if (!fwe) {
++ ret = -ENOENT;
++ goto error;
++ }
++
++ op_mode = at76_get_op_mode(udev);
++
++ at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
++
++ /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
++ we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
++
++ if (op_mode == OPMODE_HW_CONFIG_MODE) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "cannot handle a device in HW_CONFIG_MODE\n");
++ ret = -EBUSY;
++ goto error;
++ }
++
++ if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
++ && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
++ /* download internal firmware part */
++ dev_printk(KERN_DEBUG, &interface->dev,
++ "downloading internal firmware\n");
++ ret = at76_load_internal_fw(udev, fwe);
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "error %d downloading internal firmware\n",
++ ret);
++ goto error;
++ }
++ usb_put_dev(udev);
++ return ret;
++ }
++
++ /* Internal firmware already inside the device. Get firmware
++ * version to test if external firmware is loaded.
++ * This works only for newer firmware, e.g. the Intersil 0.90.x
++ * says "control timeout on ep0in" and subsequent
++ * at76_get_op_mode() fail too :-( */
++
++ /* if version >= 0.100.x.y or device with built-in flash we can
++ * query the device for the fw version */
++ if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
++ || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
++ ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
++ if (ret < 0 || (fwv.major | fwv.minor) == 0)
++ need_ext_fw = 1;
++ } else
++ /* No way to check firmware version, reload to be sure */
++ need_ext_fw = 1;
++
++ if (need_ext_fw) {
++ dev_printk(KERN_DEBUG, &interface->dev,
++ "downloading external firmware\n");
++
++ ret = at76_load_external_fw(udev, fwe);
++ if (ret)
++ goto error;
++
++ /* Re-check firmware version */
++ ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
++ if (ret < 0) {
++ dev_printk(KERN_ERR, &interface->dev,
++ "error %d getting firmware version\n", ret);
++ goto error;
++ }
++ }
++
++ priv = at76_alloc_new_device(udev);
++ if (!priv) {
++ ret = -ENOMEM;
++ goto error;
++ }
++
++ SET_NETDEV_DEV(priv->netdev, &interface->dev);
++ usb_set_intfdata(interface, priv);
++
++ memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version));
++ priv->board_type = board_type;
++
++ ret = at76_init_new_device(priv, interface);
++ if (ret < 0)
++ at76_delete_device(priv);
++
++ return ret;
++
++error:
++ usb_put_dev(udev);
++ return ret;
++}
++
++static void at76_disconnect(struct usb_interface *interface)
++{
++ struct at76_priv *priv;
++
++ priv = usb_get_intfdata(interface);
++ usb_set_intfdata(interface, NULL);
++
++ /* Disconnect after loading internal firmware */
++ if (!priv)
++ return;
++
++ printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name);
++ at76_delete_device(priv);
++ dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
++}
++
++/* Structure for registering this driver with the USB subsystem */
++static struct usb_driver at76_driver = {
++ .name = DRIVER_NAME,
++ .probe = at76_probe,
++ .disconnect = at76_disconnect,
++ .id_table = dev_table,
++};
++
++static int __init at76_mod_init(void)
++{
++ int result;
++
++ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
++
++ mutex_init(&fw_mutex);
++
++ /* register this driver with the USB subsystem */
++ result = usb_register(&at76_driver);
++ if (result < 0)
++ printk(KERN_ERR DRIVER_NAME
++ ": usb_register failed (status %d)\n", result);
++
++ led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
++ return result;
++}
++
++static void __exit at76_mod_exit(void)
++{
++ int i;
++
++ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
++ usb_deregister(&at76_driver);
++ for (i = 0; i < ARRAY_SIZE(firmwares); i++) {
++ if (firmwares[i].fw)
++ release_firmware(firmwares[i].fw);
++ }
++ led_trigger_unregister_simple(ledtrig_tx);
++}
++
++module_param_named(debug, at76_debug, int, 0600);
++MODULE_PARM_DESC(debug, "Debugging level");
++
++module_init(at76_mod_init);
++module_exit(at76_mod_exit);
++
++MODULE_AUTHOR("Oliver Kurth <oku at masqmail.cx>");
++MODULE_AUTHOR("Joerg Albert <joerg.albert at gmx.de>");
++MODULE_AUTHOR("Alex <alex at foogod.com>");
++MODULE_AUTHOR("Nick Jones");
++MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453 at hotmail.com>");
++MODULE_AUTHOR("Pavel Roskin <proski at gnu.org>");
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE("GPL");
+diff -up linux-2.6.24.noarch/drivers/net/wireless/Kconfig.orig linux-2.6.24.noarch/drivers/net/wireless/Kconfig
+--- linux-2.6.24.noarch/drivers/net/wireless/Kconfig.orig 2008-02-05 22:45:16.000000000 -0500
++++ linux-2.6.24.noarch/drivers/net/wireless/Kconfig 2008-02-05 22:46:17.000000000 -0500
+@@ -451,6 +451,14 @@ config PCMCIA_ATMEL
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
++config USB_ATMEL
++ tristate "Atmel at76c503/at76c505/at76c505a USB cards"
++ depends on WLAN_80211 && USB
++ select FW_LOADER
++ ---help---
++ Enable support for USB Wireless devices using Atmel at76c503,
++ at76c505 or at76c505a chips.
++
+ config AIRO_CS
+ tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+ depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
Modified: dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
==============================================================================
--- dists/trunk/linux-2.6/debian/patches/series/1~experimental.1 (original)
+++ dists/trunk/linux-2.6/debian/patches/series/1~experimental.1 Thu Feb 21 12:20:06 2008
@@ -29,6 +29,8 @@
+ bugfix/arm/disable-scsi_acard.patch
+ bugfix/arm/disable-ath5k.patch
+ bugfix/arm/disable-r6040.patch
++ debian/patches/features/all/at76.patch
#the following will be fixed before 2.6.25 is out:
+ bugfix/sata_mv-platform_driver.patch
+ bugfix/arm/ignore-invalid-memtags.patch
+
More information about the Kernel-svn-changes
mailing list