[Linux-wlan-ng-devel] linux-wlan-ng_0.2.9+dfsg-3_amd64.changes is NEW

[Archive Administrator]

linux-wlan-ng-doc_0.2.9+dfsg-3_all.deb
  to main/l/linux-wlan-ng/linux-wlan-ng-doc_0.2.9+dfsg-3_all.deb
linux-wlan-ng-firmware_0.2.9+dfsg-3_all.deb
  to contrib/l/linux-wlan-ng/linux-wlan-ng-firmware_0.2.9+dfsg-3_all.deb
linux-wlan-ng-source_0.2.9+dfsg-3_all.deb
  to main/l/linux-wlan-ng/linux-wlan-ng-source_0.2.9+dfsg-3_all.deb
linux-wlan-ng_0.2.9+dfsg-3.diff.gz
  to main/l/linux-wlan-ng/linux-wlan-ng_0.2.9+dfsg-3.diff.gz
linux-wlan-ng_0.2.9+dfsg-3.dsc
  to main/l/linux-wlan-ng/linux-wlan-ng_0.2.9+dfsg-3.dsc
linux-wlan-ng_0.2.9+dfsg-3_amd64.deb
  to main/l/linux-wlan-ng/linux-wlan-ng_0.2.9+dfsg-3_amd64.deb
(new) prism2-usb-firmware-installer_0.2.9+dfsg-3_amd64.deb extra contrib/admin
firmware files for the prism2_usb kernel driver
 prism2-usb-firmware-installer will at the time of its own installation
 download the firmware files for the prism2_usb devices from the
 upstream code repository and convert them to the format used by the
 kernel modules since 2.6.32.
 .
 The downloaded file will be used as-is by the 2.6.31 kernel. If you
 have an earlier kernel you will have to install the
 linux-wlan-ng-firmware package instead.
 .
 Note that only some adapters really need a firmware file and that
 firmware files are not completely free (in the sense of freely
 redistributable), which is why this package exists.
Changes: linux-wlan-ng (0.2.9+dfsg-3) unstable; urgency=low
 .
  [ Tormod Volden ]
  * New prism2-usb-firmware-installer binary package for use with
    kernels with the staging prism2_usb driver using kernel
    firmware loading.
  * Install udev rules in /lib/udev and remove old one from /etc/udev
  * Replace dh_clean -k by dh_prep
  * Bump Standards-Version to 3.8.4
  * Add debian/README.source referring to dpatch
  * Merge debian/NEWS into changelog
  * debian/copyright: "GPL" means "GPL-2"
  * debian/linux-wlan-ng-firmware.copyright: Make machine-readable
  * add srec2fw.c and mention it in the copyright file
  * wrote man page for srec2fw
 .
  [ Enrico Tassi ]
  * Added ${shlibs:Depends} to prism2-usb-firmware-installer
  * Added ${misc:Depends} to all packages since we are using debhelper
  * debian/compat set to 7
  * Build-depend on debhelper >= 7


Override entries for your package:
linux-wlan-ng-doc_0.2.9+dfsg-3_all.deb - extra doc
linux-wlan-ng-firmware_0.2.9+dfsg-3_all.deb - extra contrib/kernel
linux-wlan-ng-source_0.2.9+dfsg-3_all.deb - extra kernel
linux-wlan-ng_0.2.9+dfsg-3.dsc - source kernel
linux-wlan-ng_0.2.9+dfsg-3_amd64.deb - extra kernel

Announcing to debian-devel-changes at lists.debian.org


Your package contains new components which requires manual editing of
the override file.  It is ok otherwise, so please be patient.  New
packages are usually added to the override file about once a week.

You may have gotten the distribution wrong.  You'll get warnings above
if files already exist in other distributions.