[Ltrace-devel] 0.7.90-gitbc0de43: BROKEN mispel arch

[Oliver Spornitz]

Am 19.02.2013 um 21:17 schrieb Sedat Dilek:

> On Tue, Feb 19, 2013 at 8:59 PM, Petr Machata <pmachata at redhat.com> wrote:
>> Sedat Dilek <sedat.dilek at gmail.com> writes:
>> 
>>> with latest ltrace upstream GIT I get for my 7170 (mipsel-based) router box:
>>> 
>>> configure: creating ./config.status
>>> config.status: error: cannot find input file: `Makefile.in'
>> 
>> As a wild guess: did you run ./autogen.sh, make distclean, etc.?
>> I.e. isn't there some state around that would still be hooked up to the
>> old ways?
>> 
> 
> Yes, I am using autogen.sh - which worked well all the other builds.
> Why should it not work now?
> And I am doing a 'make distclean' before building - always.
> 
> - Sedat -
> 
>> PM
> <ltrace.mk>

I used your ltrace.mk to create a script building freetz on mipsel with
ltrace from git enabled. In your ltrace.mk only patching was removed.
Ltrace-git builds just fine. The script uses the defconfig, which is a 
mipsel box to keep it simple.

Regards
OS


#!/bin/bash
set -u
set -e

TMPDIR=$(mktemp -d)
cd $TMPDIR

# get freetz
wget http://freetz.org/downloads/freetz-1.2.tar.bz2
tar xvjf freetz-1.2.tar.bz2

# set default config
cd freetz-1.2
umask 0022
make defconfig

# enable ltrace in config
sed -i 's/# FREETZ_PACKAGE_LTRACE is not set/FREETZ_PACKAGE_LTRACE=y/' .config
make oldconfig

cd make/ltrace

# copy over ltrace.mk
cat << 'EOF' > ltrace.mk
$(call PKG_INIT_BIN, 0.7.90-git)
$(PKG)_SOURCE:=ltrace-$($(PKG)_VERSION).tar.gz
# Comment MD5 as it differs for each downloaded tarball from upstream Git repository
#$(PKG)_SOURCE_MD5:=xxx
# XXX: Workaround: Generate a tarball from upstream Git repository (use 7 digits)
$(PKG)_GIT_VERSION:=bc0de43
$(PKG)_SITE:=http://anonscm.debian.org/gitweb/?p=collab-maint/ltrace.git;a=snapshot;h=$($(PKG)_GIT_VERSION);sf=tgz

$(PKG)_BINARY:=$($(PKG)_DIR)/ltrace
$(PKG)_CONF:=$($(PKG)_DIR)/etc/ltrace.conf
$(PKG)_TARGET_BINARY:=$($(PKG)_DEST_DIR)/usr/sbin/ltrace
$(PKG)_TARGET_CONF:=$($(PKG)_DEST_DIR)/etc/ltrace.conf

$(PKG)_DEPENDS_ON := libelf

$(PKG)_REBUILD_SUBOPTS += FREETZ_PACKAGE_LTRACE_STATIC

# Copy original header files and regenerate them using mksyscallent_mips and mksignalent scripts
$(PKG)_CONFIGURE_PRE_CMDS += ( \
	cd sysdeps/linux-gnu/mips ; \
	cp syscallent.h syscallent.h.orig ; \
	cp signalent.h signalent.h.orig ; \
	../mksyscallent_mips $(TARGET_TOOLCHAIN_STAGING_DIR)/usr/include/asm/unistd.h > syscallent.h ; \
	../mksignalent $(TARGET_TOOLCHAIN_STAGING_DIR)/usr/include/asm/signal.h > signalent.h ; \
	);

# Use autogen.sh script to generate missing files like configure etc.
$(PKG)_CONFIGURE_PRE_CMDS += ./autogen.sh ;

# Disable demangling support
$(PKG)_CONFIGURE_ENV += ac_cv_lib_iberty_cplus_demangle=no
$(PKG)_CONFIGURE_ENV += ac_cv_lib_stdcpp___cxa_demangle=no
$(PKG)_CONFIGURE_ENV += ac_cv_lib_supcpp___cxa_demangle=no

$(PKG)_CONFIGURE_ENV += LD="$(TARGET_LD)"

# Set compiler options to suppress warnings treated as errors
# Reference: gcc manual chapter "3.8 Options to Request or Suppress Warnings"
# <http://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#Warning-Options>
# EXAMPLE: TARGET_CC_OPTS := -Wno-error=maybe-uninitialized (here: gcc-4.7)
ifneq (,$(strip $(filter 4.7,$(TARGET_TOOLCHAIN_GCC_MAJOR_VERSION))))
TARGET_CC_OPTS := -Wno-error=maybe-uninitialized
else
TARGET_CC_OPTS :=
endif

# XXX: Workaround: Download Git tarball (replaces $(PKG_SOURCE_DOWNLOAD))
$(DL_DIR)/$(LTRACE_SOURCE): | $(DL_DIR)
	wget -O $(DL_DIR)/$(LTRACE_SOURCE) "$(LTRACE_SITE)"

$(pkg)-download: $(DL_DIR)/$(LTRACE_SOURCE)

# XXX: Workaround: Unpack Git tarball and apply patches (replaces $(PKG_UNPACKED))
$($(PKG)_DIR)/.unpacked: $(DL_DIR)/$(LTRACE_SOURCE) | $(SOURCE_DIR)
	mkdir -p $(LTRACE_DIR)
	tar -C $(LTRACE_DIR) $(VERBOSE) --strip-components=1 \
		-xf $(DL_DIR)/$(LTRACE_SOURCE)
	touch $@

$(pkg)-unpacked: $($(PKG)_DIR)/.unpacked

# XXX: Workaround: Commented due to switch to Git tarball usage
#$(PKG_SOURCE_DOWNLOAD)
#$(PKG_UNPACKED)
$(PKG_CONFIGURED_CONFIGURE)

$($(PKG)_CONF): $($(PKG)_DIR)/.unpacked

$($(PKG)_TARGET_CONF): $($(PKG)_CONF)
	mkdir -p $(dir $@)
	cp $< $@

$($(PKG)_BINARY): $($(PKG)_DIR)/.configured
	$(SUBMAKE) -C $(LTRACE_DIR) \
		ARCH="$(KERNEL_ARCH)" \
		CFLAGS="$(TARGET_CFLAGS) $(TARGET_CC_OPTS)" \
		$(if $(FREETZ_PACKAGE_LTRACE_STATIC),LDFLAGS="-all-static")

$($(PKG)_TARGET_BINARY): $($(PKG)_BINARY)
	$(INSTALL_BINARY_STRIP)

$(pkg):

$(pkg)-precompiled: $($(PKG)_TARGET_BINARY) $($(PKG)_TARGET_CONF)

$(pkg)-clean:
	-$(SUBMAKE) -C $(LTRACE_DIR) clean

$(pkg)-uninstall:
	$(RM) $(LTRACE_TARGET_BINARY)
	$(RM) $(LTRACE_TARGET_CONF)

.PHONY: $(pkg)-download $(pkg)-unpacked $(pkg) $(pkg)-precompiled $(pkg)-clean $(pkg)-uninstall

$(PKG_FINISH)
EOF



cd $TMPDIR/freetz-1.2
# we do not have a firmware, create a dummy to make freetz happy
mkdir -p dl/fw
touch dl/fw/FRITZ.Box_Fon_WLAN_7270_v2.54.04.88.image

make