[nut-Support Requests][312897] NUT 2.4.1 & CyberPower Value 400E wrong status

[nut-supportrequests at alioth.debian.org]

Support Requests item #312897, was opened at 24.12.2010 15:28 by junkie junkie
You can respond by visiting: 
https://alioth.debian.org/tracker/?func=detail&atid=411543&aid=312897&group_id=30602

Status: Open
Priority: 3
Submitted By: junkie junkie (junkie-guest)
Assigned to: Nobody (None)
Summary: NUT 2.4.1 & CyberPower Value 400E wrong status 
Group: None
Category: None


Initial Comment:
Hello.

I have a problem with UPS CyberPower Value 400E (connected to USB and use driver "usbhid-ups"): NUT reports "ups.status: OL LB", but if i use software from CyberPower (PowerPanel) - all good.

#cat ups.conf
[myups]
driver = usbhid-ups
port = auto
vendorid =0764

# upsc myups at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 325
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 13.8
battery.voltage.nominal: 12
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.4.1
driver.version.data: CyberPower HID 0.2
driver.version.internal: 0.34
input.transfer.high: 280
input.transfer.low: 180
input.voltage: 212.0
input.voltage.nominal: 230
output.voltage: 212.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 54
ups.mfr: CPS
ups.model: UPS VALUE
ups.productid: 0501
ups.realpower.nominal: 240
ups.status: OL LB
ups.test.result: Done and passed
ups.timer.shutdown: -1
ups.timer.start: 0
ups.vendorid: 0764

Prompt, in what the reason?

----------------------------------------------------------------------

You can respond by visiting: 
https://alioth.debian.org/tracker/?func=detail&atid=411543&aid=312897&group_id=30602