[nut-Support Requests][312897] NUT 2.4.1 & CyberPower Value 400E wrong status

[nut-supportrequests at alioth.debian.org]

Support Requests item #312897, was changed at 24.12.2010 15:28 by junkie junkie
You can respond by visiting: 
https://alioth.debian.org/tracker/?func=detail&atid=411543&aid=312897&group_id=30602

Status: Closed
Priority: 1
Submitted By: junkie junkie (junkie-guest)
Assigned to: Arjen de Korte (adkorte-guest)
Summary: NUT 2.4.1 & CyberPower Value 400E wrong status 
Group: None
Category: None


Initial Comment:
Hello.

I have a problem with UPS CyberPower Value 400E (connected to USB and use driver "usbhid-ups"): NUT reports "ups.status: OL LB", but if i use software from CyberPower (PowerPanel) - all good.

#cat ups.conf
[myups]
driver = usbhid-ups
port = auto
vendorid =0764

# upsc myups at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 325
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 13.8
battery.voltage.nominal: 12
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.4.1
driver.version.data: CyberPower HID 0.2
driver.version.internal: 0.34
input.transfer.high: 280
input.transfer.low: 180
input.voltage: 212.0
input.voltage.nominal: 230
output.voltage: 212.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 54
ups.mfr: CPS
ups.model: UPS VALUE
ups.productid: 0501
ups.realpower.nominal: 240
ups.status: OL LB
ups.test.result: Done and passed
ups.timer.shutdown: -1
ups.timer.start: 0
ups.vendorid: 0764

Prompt, in what the reason?

----------------------------------------------------------------------

Comment By: junkie junkie (junkie-guest)
Date: 27.12.2010 12:55

Message:
Arjen de Korte

Thank you very much!
All has turned out.

With coming New Year!

----------------------------------------------------------------------

Comment By: Arjen de Korte (adkorte-guest)
Date: 24.12.2010 20:03

Message:
The battery.runtime.low is quite close to the battery.runtime. Lower the value of battery.runtime low to have more runtime on battery before the LB indication is given. Use the mailinglists if you need more support.

----------------------------------------------------------------------

Comment By: junkie junkie (junkie-guest)
Date: 24.12.2010 16:49

Message:
Sorry to trouble you.
Probably a problem in UPS: When loading more than 50 % it gives out "LB"
Only here I don't know now as with it to be...


----------------------------------------------------------------------

You can respond by visiting: 
https://alioth.debian.org/tracker/?func=detail&atid=411543&aid=312897&group_id=30602