[Pbuilder-maint] pbuilder CVS update: pbuilder/testsuite/normal
pdebuild-normal-sid.log pdebuild-normal-etch.log
pdebuild-internal-sid.log pdebuild-internal-etch.log
pbuilder-update-etch-sid.log
pbuilder-update-etch-sid-experimental.log
pbuilder-execute-sid.log pbuilder-execute-etch.log
pbuilder-create-sid.log pbuilder-create-etch.log
pbuilder-build-dsh-sid.log pbuilder-build-dsh-etch.log
pbuilder CVS Commit
pbuilder-maint at lists.alioth.debian.org
Sun Jul 30 04:04:30 UTC 2006
- Previous message: [Pbuilder-maint] FROM:DR HARUNA YAHAYA ,CHAIRMAN TASK FORCE ON
ECONOMIC RECOVERY. DEAR FRIEND,I AM THE CHAIRMAN OF THE ABOVE
COMMITEE TO RECOVER FUNDS THAT WAS STARCHED AWAY IN FOREIGN
COUNTRIES BY LATE HEAD OF STATE GEN. SANNI ABACHA AND HIS
COHORTS. IMMEDAITELY THE COMMITEE WAS INAUGURATED -1999/2000,
DURING OUR SELFLESS AND PATRIOTIC SERVICE TO OUR FATHERLAND,
WE RECOVERED SO MUCH FUND BUT BETWEEN 2003 TO PRESENT DATE,
WE ALSO OBSERVED THAT THE GOVERNMENT INSTEAD OF UTILIZING THE
RECOVERED FUNDS JUDICIOUSLY FOR THE WELL BEING OF ALL THE
CITIZENS WAS SHARING THE MONIES AMONG THEMSELVES. THIS CUT
THE ATTENTION OF MY COLLEAGUES AND MYSELF AND WE CONCLUDED
THAT THE TASK FORCE WAS SET UP AS A VENDETTA AGAINST THE
ABACHA FAMILY SINCE THEY WERE NOT THE ONLY PEOPLE THAT
SIPHONED MONEY ABROAD.AS A RESULT, MY COLLEAGUES AND I
DECIDED TO HELP OURSELVES WITH PART OF THE RECOVERED MONEY
THAT IS LYING WITH A SECURITY COMPANY IN EUROPE.THE MONEY
TOTALING ABOUT US$27MILLION WAS CAREFULLY ! PACK! ED IN 2
BOXES AND WAS DEPOSITED AS FAMILY TREASURE IN THE SECURITY
FIRM. WE REQUEST FOR YOUR ASSISTANCE TO SECURE THE MONEY INTO
YOUR ACCOUNT FOR PROTECTION UNTIL WE DISENGAGE FROM SERVICE
TO JOIN YOU IN YOUR COUNTRY FOR THE DISBURSMENT OF THE
FUND.IF YOU ARE SURE THAT YOU CAN HANDLE THIS PROJECT BY
TAKING THE POSTURE OF THE TRUE BENEFICIARY OF THE BOXES
WITHOUT EXPOSING OUR INVOLVEMENT TO ANYBODY, GET BACK TO ME
WITH THE FOLLOWING INFORMATION: FULL NAMES,
NATIONALITY,INTERNATIONAL PASSPORT/ID CARD ,COMPANY NAME AND
ADDRESS AND TELEPHONE FOR EASY COMMUNICATION WITH YOU .ONCE I
OBSERVE THIS INFORMATION, I WILL EQUIP YOU WITH THE CODE OF
DEPOSIT FOR YOU TO VISIT THE SECURITY COMPANY OFFCIE FOR THE
CLAIMS. FINALLY THIS IS A TOP PRIORITY AND NEED SINCERITY AND
SECRECY;
IF YOU ARE NOT INTERESTED OR CANNOT HANDLE THIS PROJECT, PLEASE DON'T
BOTHER YOURSELF TO WRITE BACK. SINCERELY, DR HARUNA YAHAYA
- Next message: [Pbuilder-maint] pbuilder CVS update:
pbuilder/testsuite/cdebootstrap pdebuild-normal-sid.log
pdebuild-normal-etch.log pdebuild-internal-sid.log
pdebuild-internal-etch.log pbuilder-update-etch-sid.log
pbuilder-update-etch-sid-experimental.log
pbuilder-execute-sid.log pbuilder-execute-etch.log
pbuilder-create-sid.log pbuilder-create-etch.log
pbuilder-build-dsh-sid.log pbuilder-build-dsh-etch.log
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
User: dancer
Date: 06/07/30 04:04:30
Modified: testsuite/normal pdebuild-normal-sid.log
pdebuild-normal-etch.log pdebuild-internal-sid.log
pdebuild-internal-etch.log
pbuilder-update-etch-sid.log
pbuilder-update-etch-sid-experimental.log
pbuilder-execute-sid.log pbuilder-execute-etch.log
pbuilder-create-sid.log pbuilder-create-etch.log
pbuilder-build-dsh-sid.log
pbuilder-build-dsh-etch.log
Log:
testsuite update
Revision Changes Path
1.100 +14 -14 pbuilder/testsuite/normal/pdebuild-normal-sid.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-sid.log?annotate=1.100&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-sid.log?rev=1.100&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-sid.log.diff?r1=1.100&r2=1.99&cvsroot=
-----------------------------------
Index: pdebuild-normal-sid.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-sid.log,v
retrieving revision 1.99
retrieving revision 1.100
diff -u -r1.99 -r1.100
--- pdebuild-normal-sid.log 25 Jul 2006 23:38:43 -0000 1.99
+++ pdebuild-normal-sid.log 30 Jul 2006 04:04:28 -0000 1.100
@@ -7,14 +7,14 @@
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `clean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
/usr/bin/make distclean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `distclean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
dh_clean
dh_clean: Compatibility levels before 4 are deprecated.
@@ -32,10 +32,10 @@
pbuilder-buildpackage/amd64 $Id$
$Id$
-Current time: Tue Jul 25 12:03:37 JST 2006
-pbuilder-time-stamp: 1153796617
+Current time: Sun Jul 30 12:04:00 JST 2006
+pbuilder-time-stamp: 1154228640
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -64,7 +64,7 @@
Need to get 0B/2913kB of archives.
After unpacking 9646kB of additional disk space will be used.
Selecting previously deselected package libmagic1.
-(Reading database ... 11857 files and directories currently installed.)
+(Reading database ... 11863 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-2_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-2_amd64.deb) ...
@@ -104,7 +104,7 @@
Need to get 0B/97.4kB of archives.
After unpacking 406kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
-(Reading database ... 12454 files and directories currently installed.)
+(Reading database ... 12460 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.10_amd64.deb) ...
Setting up fakeroot (1.5.10) ...
@@ -435,7 +435,7 @@
2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
-Tue Jul 25 03:04:11 UTC 2006
+Sun Jul 30 03:04:46 UTC 2006
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
@@ -505,7 +505,7 @@
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
-Tue Jul 25 03:04:16 UTC 2006
+Sun Jul 30 03:04:51 UTC 2006
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
@@ -636,7 +636,7 @@
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-Current time: Tue Jul 25 12:04:18 JST 2006
-pbuilder-time-stamp: 1153796658
+Current time: Sun Jul 30 12:04:55 JST 2006
+pbuilder-time-stamp: 1154228695
-> cleaning the build env
- -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir3/18053 and its subdirectories
+ -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir3/11491 and its subdirectories
1.76 +16 -20 pbuilder/testsuite/normal/pdebuild-normal-etch.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-etch.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-etch.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-etch.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pdebuild-normal-etch.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pdebuild-normal-etch.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pdebuild-normal-etch.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pdebuild-normal-etch.log 30 Jul 2006 04:04:28 -0000 1.76
@@ -7,14 +7,14 @@
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `clean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
/usr/bin/make distclean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `distclean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
dh_clean
dh_clean: Compatibility levels before 4 are deprecated.
@@ -32,10 +32,10 @@
pbuilder-buildpackage/amd64 $Id$
$Id$
-Current time: Tue Jul 25 12:08:27 JST 2006
-pbuilder-time-stamp: 1153796907
+Current time: Sun Jul 30 12:09:44 JST 2006
+pbuilder-time-stamp: 1154228984
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -64,7 +64,7 @@
Need to get 0B/2913kB of archives.
After unpacking 9646kB of additional disk space will be used.
Selecting previously deselected package libmagic1.
-(Reading database ... 11581 files and directories currently installed.)
+(Reading database ... 11586 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-2_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-2_amd64.deb) ...
@@ -104,7 +104,7 @@
Need to get 0B/96.5kB of archives.
After unpacking 401kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
-(Reading database ... 12178 files and directories currently installed.)
+(Reading database ... 12183 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.9_amd64.deb) ...
Setting up fakeroot (1.5.9) ...
@@ -114,16 +114,12 @@
-> copying [../dsh_0.25.6.orig.tar.gz]
-> copying [../dsh_0.25.6-1.diff.gz]
Extracting source
-su: Authentication service cannot retrieve authentication info.
-(Ignored)
dpkg-source: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
dpkg-source: warning: extracting unsigned source package (./dsh_0.25.6-1.dsc)
dpkg-source: extracting dsh in dsh-0.25.6
dpkg-source: unpacking dsh_0.25.6.orig.tar.gz
dpkg-source: applying ./dsh_0.25.6-1.diff.gz
-> Building the package
-su: Authentication service cannot retrieve authentication info.
-(Ignored)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
dpkg-buildpackage: source package is dsh
@@ -424,10 +420,10 @@
success
success
success
-a: dsh: Failed executing ./invalid-exec-file with llexec call
b: dsh: Failed executing ./invalid-exec-file with llexec call
c: dsh: Failed executing ./invalid-exec-file with llexec call
d: dsh: Failed executing ./invalid-exec-file with llexec call
+a: dsh: Failed executing ./invalid-exec-file with llexec call
success
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
@@ -435,11 +431,11 @@
dsh: Failed executing ./invalid-exec-file with llexec call
success
PASS: tests/param-r-invalid.sh
-2: 2
1: 1
+2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
-Tue Jul 25 03:08:57 UTC 2006
+Sun Jul 30 03:10:40 UTC 2006
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
@@ -509,7 +505,7 @@
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
-Tue Jul 25 03:09:02 UTC 2006
+Sun Jul 30 03:10:45 UTC 2006
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
@@ -639,7 +635,7 @@
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-Current time: Tue Jul 25 12:09:04 JST 2006
-pbuilder-time-stamp: 1153796944
+Current time: Sun Jul 30 12:10:48 JST 2006
+pbuilder-time-stamp: 1154229048
-> cleaning the build env
- -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir3/17247 and its subdirectories
+ -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir3/10967 and its subdirectories
1.100 +77 -78 pbuilder/testsuite/normal/pdebuild-internal-sid.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-sid.log?annotate=1.100&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-sid.log?rev=1.100&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-sid.log.diff?r1=1.100&r2=1.99&cvsroot=
-----------------------------------
Index: pdebuild-internal-sid.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-sid.log,v
retrieving revision 1.99
retrieving revision 1.100
diff -u -r1.99 -r1.100
--- pdebuild-internal-sid.log 25 Jul 2006 23:38:43 -0000 1.99
+++ pdebuild-internal-sid.log 30 Jul 2006 04:04:28 -0000 1.100
@@ -1,14 +1,14 @@
W: /home/dancer/.pbuilderrc does not exist
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
-> mounting /dev/pts filesystem
--> Mounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2
+-> Mounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2
-> policy-rc.d already exists
Obtaining the cached apt archive contents
-Using: : pdebuild-internal,v 1.12 2006/06/05 11:39:04 dancer Exp $
+Using: : pdebuild-internal,v 1.13 2006/06/25 16:39:31 dancer Exp $
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
@@ -23,20 +23,20 @@
Need to get 0B/142kB of archives.
After unpacking 799kB of additional disk space will be used.
Selecting previously deselected package libdebian-installer4.
-(Reading database ... 11857 files and directories currently installed.)
+(Reading database ... 11863 files and directories currently installed.)
Unpacking libdebian-installer4 (from .../libdebian-installer4_0.43_amd64.deb) ...
Selecting previously deselected package libdebian-installer-extra4.
Unpacking libdebian-installer-extra4 (from .../libdebian-installer-extra4_0.43_amd64.deb) ...
Selecting previously deselected package cdebootstrap.
Unpacking cdebootstrap (from .../cdebootstrap_0.3.11_amd64.deb) ...
Selecting previously deselected package pbuilder.
-Unpacking pbuilder (from .../pbuilder_0.155_all.deb) ...
+Unpacking pbuilder (from .../pbuilder_0.156_all.deb) ...
Setting up libdebian-installer4 (0.43) ...
Setting up libdebian-installer-extra4 (0.43) ...
Setting up cdebootstrap (0.3.11) ...
-Setting up pbuilder (0.155) ...
+Setting up pbuilder (0.156) ...
Setting DEBBUILDOPTS=
-> Attempting to parse the build-deps : pbuilder-satisfydepends,v 1.28 2006/05/30 23:45:45 dancer Exp $
-> Considering debhelper (>> 3.0.0)
@@ -59,7 +59,7 @@
Need to get 0B/2913kB of archives.
After unpacking 9646kB of additional disk space will be used.
Selecting previously deselected package libmagic1.
-(Reading database ... 11954 files and directories currently installed.)
+(Reading database ... 11960 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-2_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-2_amd64.deb) ...
@@ -99,7 +99,7 @@
Need to get 0B/97.4kB of archives.
After unpacking 406kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
-(Reading database ... 12551 files and directories currently installed.)
+(Reading database ... 12557 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.10_amd64.deb) ...
Setting up fakeroot (1.5.10) ...
@@ -113,14 +113,14 @@
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `clean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
/usr/bin/make distclean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `distclean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
dh_clean
dh_clean: Compatibility levels before 4 are deprecated.
@@ -309,18 +309,18 @@
touch configure-stamp
dh_testdir
/usr/bin/make
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make all-recursive
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
Making all in m4
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
make[3]: Nothing to be done for `all'.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
Making all in po
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
make[3]: Nothing to be done for `all'.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-dsh.o -MD -MP -MF ".deps/dsh-dsh.Tpo" -c -o dsh-dsh.o `test -f 'dsh.c' || echo './'`dsh.c; \
then mv -f ".deps/dsh-dsh.Tpo" ".deps/dsh-dsh.Po"; else rm -f ".deps/dsh-dsh.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-linkedlist.o -MD -MP -MF ".deps/dsh-linkedlist.Tpo" -c -o dsh-linkedlist.o `test -f 'linkedlist.c' || echo './'`linkedlist.c; \
@@ -333,26 +333,26 @@
mkdir build-man
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.1 > build-man/dsh.1
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.5 > build-man/dsh.conf.5
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make check
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
Making check in m4
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
make[2]: Nothing to be done for `check'.
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
Making check in po
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
make[2]: Nothing to be done for `check'.
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make dsh
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[3]: `dsh' is up to date.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make check-TESTS
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
PASS: tests/param-f.sh
dsh: File ./tests/nonexistent.file could not be opened for read
PASS: tests/param-f-fail.sh
@@ -390,8 +390,8 @@
success
a: dsh: Failed executing ./invalid-exec-file with llexec call
b: dsh: Failed executing ./invalid-exec-file with llexec call
-c: dsh: Failed executing ./invalid-exec-file with llexec call
d: dsh: Failed executing ./invalid-exec-file with llexec call
+c: dsh: Failed executing ./invalid-exec-file with llexec call
success
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
@@ -399,11 +399,11 @@
dsh: Failed executing ./invalid-exec-file with llexec call
success
PASS: tests/param-r-invalid.sh
-2: 2
1: 1
+2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
-Tue Jul 25 03:04:53 UTC 2006
+Sun Jul 30 03:05:44 UTC 2006
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
@@ -473,14 +473,13 @@
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
-Tue Jul 25 03:04:58 UTC 2006
+Sun Jul 30 03:05:49 UTC 2006
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
a: a
b: b
c: c
-dsh: Process terminated (before write).
PASS: tests/segv-catcher.sh
l w
PASS: tests/test-bufferoverflow.sh
@@ -489,9 +488,9 @@
===================
All 17 tests passed
===================
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
touch build-stamp
fakeroot debian/rules binary
dh_testdir
@@ -501,58 +500,58 @@
dh_installdirs
dh_installdirs: Compatibility levels before 4 are deprecated.
# Add here commands to install the package into debian/dsh.
-/usr/bin/make install DESTDIR=/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+/usr/bin/make install DESTDIR=/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
Making install in m4
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
Making install in po
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-/bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share
-mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share
-mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES
-installing ja.gmo as /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES/dsh.mo
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+/bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share
+mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share
+mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES
+installing ja.gmo as /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES/dsh.mo
if test "dsh" = "gettext"; then \
- /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po; \
+ /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po; \
for file in Makefile.in.in Makevars remove-potcdate.sin ; do \
/usr/bin/install -c -m 644 ./$file \
- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po/$file; \
+ /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po/$file; \
done; \
else \
: ; \
fi
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-test -z "/usr/bin" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/bin"
- /bin/sh ./libtool --mode=install install -p -o root -g root -m 755 -s 'dsh' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh'
-install -p -o root -g root -m 755 -s dsh /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh
-test -z "/etc/dsh" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh"
- /usr/bin/install -c -m 644 'dsh.conf' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+test -z "/usr/bin" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/bin"
+ /bin/sh ./libtool --mode=install install -p -o root -g root -m 755 -s 'dsh' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh'
+install -p -o root -g root -m 755 -s dsh /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh
+test -z "/etc/dsh" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh"
+ /usr/bin/install -c -m 644 'dsh.conf' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf'
for LANGS in ja ; do \
- mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1 ;\
- mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5 ;\
+ mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1 ;\
+ mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5 ;\
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.$LANGS.1 \
- > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1/dsh.1 ; \
+ > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1/dsh.1 ; \
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.$LANGS.5 \
- > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5/dsh.conf.5 ; \
+ > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5/dsh.conf.5 ; \
done
-test -z "/usr/share/man/man1" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1"
- /usr/bin/install -c -m 644 './build-man/dsh.1' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1/dsh.1'
-test -z "/usr/share/man/man5" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5"
- /usr/bin/install -c -m 644 './build-man/dsh.conf.5' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5/dsh.conf.5'
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/machines.list
-cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/dsh.conf /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf
-ln -s ../machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/group/all
-install -d /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster
-install -m 755 /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh.updatelist /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster/
+test -z "/usr/share/man/man1" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1"
+ /usr/bin/install -c -m 644 './build-man/dsh.1' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1/dsh.1'
+test -z "/usr/share/man/man5" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5"
+ /usr/bin/install -c -m 644 './build-man/dsh.conf.5' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5/dsh.conf.5'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/machines.list
+cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/dsh.conf /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf
+ln -s ../machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/group/all
+install -d /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster
+install -m 755 /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh.updatelist /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster/
dh_testdir
dh_testroot
dh_installdocs NEWS
@@ -592,6 +591,6 @@
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
- -> unmounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2 filesystem
+ -> unmounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2 filesystem
-> cleaning the build env
- -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir3/24293 and its subdirectories
+ -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir3/17841 and its subdirectories
1.76 +74 -74 pbuilder/testsuite/normal/pdebuild-internal-etch.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-etch.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-etch.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-etch.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pdebuild-internal-etch.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pdebuild-internal-etch.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pdebuild-internal-etch.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pdebuild-internal-etch.log 30 Jul 2006 04:04:28 -0000 1.76
@@ -1,14 +1,14 @@
W: /home/dancer/.pbuilderrc does not exist
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
-> mounting /dev/pts filesystem
--> Mounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2
+-> Mounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2
-> policy-rc.d already exists
Obtaining the cached apt archive contents
-Using: : pdebuild-internal,v 1.12 2006/06/05 11:39:04 dancer Exp $
+Using: : pdebuild-internal,v 1.13 2006/06/25 16:39:31 dancer Exp $
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
@@ -23,7 +23,7 @@
Need to get 0B/142kB of archives.
After unpacking 799kB of additional disk space will be used.
Selecting previously deselected package libdebian-installer4.
-(Reading database ... 11581 files and directories currently installed.)
+(Reading database ... 11586 files and directories currently installed.)
Unpacking libdebian-installer4 (from .../libdebian-installer4_0.43_amd64.deb) ...
Selecting previously deselected package libdebian-installer-extra4.
Unpacking libdebian-installer-extra4 (from .../libdebian-installer-extra4_0.43_amd64.deb) ...
@@ -59,7 +59,7 @@
Need to get 0B/2913kB of archives.
After unpacking 9646kB of additional disk space will be used.
Selecting previously deselected package libmagic1.
-(Reading database ... 11678 files and directories currently installed.)
+(Reading database ... 11683 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-2_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-2_amd64.deb) ...
@@ -99,7 +99,7 @@
Need to get 0B/96.5kB of archives.
After unpacking 401kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
-(Reading database ... 12275 files and directories currently installed.)
+(Reading database ... 12280 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.9_amd64.deb) ...
Setting up fakeroot (1.5.9) ...
@@ -113,14 +113,14 @@
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `clean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
/usr/bin/make distclean
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[1]: *** No rule to make target `distclean'. Stop.
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make: [clean] Error 2 (ignored)
dh_clean
dh_clean: Compatibility levels before 4 are deprecated.
@@ -309,18 +309,18 @@
touch configure-stamp
dh_testdir
/usr/bin/make
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make all-recursive
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
Making all in m4
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
make[3]: Nothing to be done for `all'.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
Making all in po
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
make[3]: Nothing to be done for `all'.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-dsh.o -MD -MP -MF ".deps/dsh-dsh.Tpo" -c -o dsh-dsh.o `test -f 'dsh.c' || echo './'`dsh.c; \
then mv -f ".deps/dsh-dsh.Tpo" ".deps/dsh-dsh.Po"; else rm -f ".deps/dsh-dsh.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-linkedlist.o -MD -MP -MF ".deps/dsh-linkedlist.Tpo" -c -o dsh-linkedlist.o `test -f 'linkedlist.c' || echo './'`linkedlist.c; \
@@ -333,26 +333,26 @@
mkdir build-man
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.1 > build-man/dsh.1
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.5 > build-man/dsh.conf.5
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make check
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
Making check in m4
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
make[2]: Nothing to be done for `check'.
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
Making check in po
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
make[2]: Nothing to be done for `check'.
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make dsh
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
make[3]: `dsh' is up to date.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
/usr/bin/make check-TESTS
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
PASS: tests/param-f.sh
dsh: File ./tests/nonexistent.file could not be opened for read
PASS: tests/param-f-fail.sh
@@ -390,8 +390,8 @@
success
a: dsh: Failed executing ./invalid-exec-file with llexec call
b: dsh: Failed executing ./invalid-exec-file with llexec call
-d: dsh: Failed executing ./invalid-exec-file with llexec call
c: dsh: Failed executing ./invalid-exec-file with llexec call
+d: dsh: Failed executing ./invalid-exec-file with llexec call
success
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
@@ -403,7 +403,7 @@
2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
-Tue Jul 25 03:09:37 UTC 2006
+Sun Jul 30 03:11:41 UTC 2006
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
@@ -473,7 +473,7 @@
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
-Tue Jul 25 03:09:42 UTC 2006
+Sun Jul 30 03:11:46 UTC 2006
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
@@ -488,9 +488,9 @@
===================
All 17 tests passed
===================
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
touch build-stamp
fakeroot debian/rules binary
dh_testdir
@@ -500,58 +500,58 @@
dh_installdirs
dh_installdirs: Compatibility levels before 4 are deprecated.
# Add here commands to install the package into debian/dsh.
-/usr/bin/make install DESTDIR=/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh
-make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
+/usr/bin/make install DESTDIR=/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh
+make[1]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
Making install in m4
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/m4'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/m4'
Making install in po
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-/bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share
-mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share
-mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES
-installing ja.gmo as /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES/dsh.mo
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+/bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share
+mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share
+mkdir -p -- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES
+installing ja.gmo as /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/locale/ja/LC_MESSAGES/dsh.mo
if test "dsh" = "gettext"; then \
- /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po; \
+ /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po; \
for file in Makefile.in.in Makevars remove-potcdate.sin ; do \
/usr/bin/install -c -m 644 ./$file \
- /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po/$file; \
+ /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/gettext/po/$file; \
done; \
else \
: ; \
fi
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/po'
-make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-test -z "/usr/bin" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/bin"
- /bin/sh ./libtool --mode=install install -p -o root -g root -m 755 -s 'dsh' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh'
-install -p -o root -g root -m 755 -s dsh /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh
-test -z "/etc/dsh" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh"
- /usr/bin/install -c -m 644 'dsh.conf' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/po'
+make[2]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[3]: Entering directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+test -z "/usr/bin" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/bin"
+ /bin/sh ./libtool --mode=install install -p -o root -g root -m 755 -s 'dsh' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh'
+install -p -o root -g root -m 755 -s dsh /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/bin/dsh
+test -z "/etc/dsh" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh"
+ /usr/bin/install -c -m 644 'dsh.conf' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf'
for LANGS in ja ; do \
- mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1 ;\
- mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5 ;\
+ mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1 ;\
+ mkdir -p /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5 ;\
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.$LANGS.1 \
- > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1/dsh.1 ; \
+ > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man1/dsh.1 ; \
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.$LANGS.5 \
- > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5/dsh.conf.5 ; \
+ > /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/$LANGS/man5/dsh.conf.5 ; \
done
-test -z "/usr/share/man/man1" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1"
- /usr/bin/install -c -m 644 './build-man/dsh.1' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1/dsh.1'
-test -z "/usr/share/man/man5" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5"
- /usr/bin/install -c -m 644 './build-man/dsh.conf.5' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5/dsh.conf.5'
-make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6'
-cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/machines.list
-cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/dsh.conf /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf
-ln -s ../machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/etc/dsh/group/all
-install -d /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster
-install -m 755 /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh.updatelist /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster/
+test -z "/usr/share/man/man1" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1"
+ /usr/bin/install -c -m 644 './build-man/dsh.1' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man1/dsh.1'
+test -z "/usr/share/man/man5" || mkdir -p -- . "/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5"
+ /usr/bin/install -c -m 644 './build-man/dsh.conf.5' '/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/share/man/man5/dsh.conf.5'
+make[3]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[2]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+make[1]: Leaving directory `/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6'
+cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/machines.list
+cp /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/dsh.conf /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/dsh.conf
+ln -s ../machines.list /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/etc/dsh/group/all
+install -d /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster
+install -m 755 /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh.updatelist /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2/dsh-0.25.6/debian/dsh/usr/lib/update-cluster/
dh_testdir
dh_testroot
dh_installdocs NEWS
@@ -591,6 +591,6 @@
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
- -> unmounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir2 filesystem
+ -> unmounting /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir2 filesystem
-> cleaning the build env
- -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir3/23461 and its subdirectories
+ -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir3/17352 and its subdirectories
1.76 +130 -70 pbuilder/testsuite/normal/pbuilder-update-etch-sid.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pbuilder-update-etch-sid.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pbuilder-update-etch-sid.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pbuilder-update-etch-sid.log 30 Jul 2006 04:04:29 -0000 1.76
@@ -1,6 +1,6 @@
Upgrading for distribution sid
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -11,8 +11,8 @@
-> upgrading packages
Get:1 http://ftp.jp.debian.org sid Release.gpg [189B]
Get:2 http://ftp.jp.debian.org sid Release [38.3kB]
-Get:3 http://ftp.jp.debian.org sid/main Packages [5459kB]
-Fetched 5497kB in 4s (1154kB/s)
+Get:3 http://ftp.jp.debian.org sid/main Packages [5467kB]
+Fetched 5505kB in 3s (1558kB/s)
Reading package lists...
dpkg - warning: ignoring request to remove lilo which isn't installed.
Obtaining the cached apt archive contents
@@ -21,47 +21,76 @@
The following NEW packages will be installed:
cpp-4.1 g++-4.1 gcc-4.1 libssp0 libstdc++6-4.1-dev
The following packages will be upgraded:
- adduser bash build-essential coreutils cpp cpp-4.0 cron dpkg dpkg-dev
- dselect g++ g++-4.0 gcc gcc-4.0 gcc-4.0-base gcc-4.1-base libconsole
- libdb4.2 libdb4.3 libdb4.4 libgcc1 libgcrypt11 libgnutls13 libldap-2.3-0
+ adduser apt apt-utils bash binutils build-essential coreutils cpp cpp-4.0
+ cron debconf debconf-i18n debianutils dpkg dpkg-dev dselect g++ g++-4.0 gcc
+ gcc-4.0 gcc-4.0-base gcc-4.1-base initscripts libacl1 libc6 libc6-dev
+ libconsole libdb4.2 libdb4.3 libdb4.4 libgcc1 libgcrypt11 libldap-2.3-0
libnewt0.52 libstdc++6 libstdc++6-4.0-dev libtasn1-3 libtasn1-3-bin
- libtext-charwidth-perl libtext-iconv-perl linux-kernel-headers login passwd
- perl perl-base perl-modules tasksel tasksel-data whiptail
-40 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
-Need to get 0B/35.2MB of archives.
-After unpacking 24.9MB of additional disk space will be used.
-(Reading database ... 11581 files and directories currently installed.)
+ libtext-charwidth-perl libtext-iconv-perl linux-kernel-headers manpages perl
+ perl-base perl-modules sysv-rc sysvinit tasksel tasksel-data whiptail
+50 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
+Need to get 413kB/44.7MB of archives.
+After unpacking 24.6MB of additional disk space will be used.
+Get:1 http://ftp.jp.debian.org sid/main debconf-i18n 1.5.3 [110kB]
+Get:2 http://ftp.jp.debian.org sid/main debconf 1.5.3 [115kB]
+Get:3 http://ftp.jp.debian.org sid/main libgcrypt11 1.2.2-3 [189kB]
+Fetched 413kB in 1s (231kB/s)
+(Reading database ... 11586 files and directories currently installed.)
+Preparing to replace debianutils 2.16.2 (using .../debianutils_2.17_amd64.deb) ...
+Unpacking replacement debianutils ...
+Setting up debianutils (2.17) ...
+
+(Reading database ... 11586 files and directories currently installed.)
Preparing to replace bash 3.1-4 (using .../archives/bash_3.1-5_amd64.deb) ...
Unpacking replacement bash ...
Setting up bash (3.1-5) ...
Installing new version of config file /etc/bash_completion ...
-(Reading database ... 11581 files and directories currently installed.)
-Preparing to replace coreutils 5.96-3 (using .../coreutils_5.96-5_amd64.deb) ...
+(Reading database ... 11586 files and directories currently installed.)
+Preparing to replace coreutils 5.96-5 (using .../coreutils_5.97-1_amd64.deb) ...
Unpacking replacement coreutils ...
-Setting up coreutils (5.96-5) ...
+Setting up coreutils (5.97-1) ...
-(Reading database ... 11581 files and directories currently installed.)
+(Reading database ... 11594 files and directories currently installed.)
Preparing to replace dpkg 1.13.21 (using .../dpkg_1.13.22_amd64.deb) ...
Unpacking replacement dpkg ...
Setting up dpkg (1.13.22) ...
-(Reading database ... 11590 files and directories currently installed.)
-Preparing to replace login 1:4.0.16-2 (using .../login_1%3a4.0.17-2_amd64.deb) ...
-Unpacking replacement login ...
-Setting up login (4.0.17-2) ...
-
-(Reading database ... 11593 files and directories currently installed.)
+(Reading database ... 11601 files and directories currently installed.)
Preparing to replace perl-modules 5.8.8-4 (using .../perl-modules_5.8.8-6_all.deb) ...
Unpacking replacement perl-modules ...
-Preparing to replace libdb4.4 4.4.20-3 (using .../libdb4.4_4.4.20-6_amd64.deb) ...
+Preparing to replace linux-kernel-headers 2.6.17.3-1 (using .../linux-kernel-headers_2.6.17.6-1_amd64.deb) ...
+Unpacking replacement linux-kernel-headers ...
+Preparing to replace libc6-dev 2.3.6-15 (using .../libc6-dev_2.3.6-16_amd64.deb) ...
+Unpacking replacement libc6-dev ...
+Preparing to replace libc6 2.3.6-15 (using .../libc6_2.3.6-16_amd64.deb) ...
+Unpacking replacement libc6 ...
+Setting up libc6 (2.3.6-16) ...
+init: timeout opening/writing control channel /dev/initctl
+
+(Reading database ... 11580 files and directories currently installed.)
+Preparing to replace libdb4.4 4.4.20-3 (using .../libdb4.4_4.4.20-7_amd64.deb) ...
Unpacking replacement libdb4.4 ...
Preparing to replace perl 5.8.8-4 (using .../perl_5.8.8-6_amd64.deb) ...
Unpacking replacement perl ...
Preparing to replace perl-base 5.8.8-4 (using .../perl-base_5.8.8-6_amd64.deb) ...
Unpacking replacement perl-base ...
Setting up perl-base (5.8.8-6) ...
-(Reading database ... 11611 files and directories currently installed.)
+(Reading database ... 11618 files and directories currently installed.)
+Preparing to replace sysvinit 2.86.ds1-14.1 (using .../sysvinit_2.86.ds1-15_amd64.deb) ...
+Unpacking replacement sysvinit ...
+Setting up sysvinit (2.86.ds1-15) ...
+init: timeout opening/writing control channel /dev/initctl
+
+(Reading database ... 11618 files and directories currently installed.)
+Preparing to replace libtext-iconv-perl 1.4-2 (using .../libtext-iconv-perl_1.4-3_amd64.deb) ...
+Unpacking replacement libtext-iconv-perl ...
+Preparing to replace libtext-charwidth-perl 0.04-3 (using .../libtext-charwidth-perl_0.04-4_amd64.deb) ...
+Unpacking replacement libtext-charwidth-perl ...
+Preparing to replace debconf-i18n 1.5.2 (using .../debconf-i18n_1.5.3_all.deb) ...
+Unpacking replacement debconf-i18n ...
+Preparing to replace debconf 1.5.2 (using .../archives/debconf_1.5.3_all.deb) ...
+Unpacking replacement debconf ...
Preparing to replace gcc-4.1-base 4.1.1-5 (using .../gcc-4.1-base_4.1.1-9_amd64.deb) ...
Unpacking replacement gcc-4.1-base ...
Preparing to replace libgcc1 1:4.1.1-5 (using .../libgcc1_1%3a4.1.1-9_amd64.deb) ...
@@ -70,46 +99,71 @@
Setting up libgcc1 (4.1.1-9) ...
-(Reading database ... 11611 files and directories currently installed.)
+(Reading database ... 11618 files and directories currently installed.)
Preparing to replace libstdc++6 4.1.1-5 (using .../libstdc++6_4.1.1-9_amd64.deb) ...
Unpacking replacement libstdc++6 ...
Setting up libstdc++6 (4.1.1-9) ...
-(Reading database ... 11611 files and directories currently installed.)
-Preparing to replace passwd 1:4.0.16-2 (using .../passwd_1%3a4.0.17-2_amd64.deb) ...
-Unpacking replacement passwd ...
+(Reading database ... 11618 files and directories currently installed.)
+Preparing to replace apt 0.6.44.2 (using .../archives/apt_0.6.45_amd64.deb) ...
+Unpacking replacement apt ...
+Setting up apt (0.6.45) ...
+
+(Reading database ... 11618 files and directories currently installed.)
+Preparing to replace initscripts 2.86.ds1-14.1 (using .../initscripts_2.86.ds1-15_amd64.deb) ...
+Unpacking replacement initscripts ...
+Setting up initscripts (2.86.ds1-15) ...
+Installing new version of config file /etc/init.d/bootmisc.sh ...
+Installing new version of config file /etc/init.d/checkfs.sh ...
+Installing new version of config file /etc/init.d/checkroot.sh ...
+Installing new version of config file /etc/init.d/hostname.sh ...
+Installing new version of config file /etc/init.d/rmnologin ...
+Installing new version of config file /etc/init.d/sendsigs ...
+Installing new version of config file /etc/init.d/umountnfs.sh ...
+
+(Reading database ... 11618 files and directories currently installed.)
+Preparing to replace libacl1 2.2.39-1 (using .../libacl1_2.2.41-1_amd64.deb) ...
+Unpacking replacement libacl1 ...
+Setting up libacl1 (2.2.41-1) ...
+
+(Reading database ... 11618 files and directories currently installed.)
+Preparing to replace sysv-rc 2.86.ds1-14.1 (using .../sysv-rc_2.86.ds1-15_all.deb) ...
+Unpacking replacement sysv-rc ...
+Setting up sysv-rc (2.86.ds1-15) ...
+
+(Reading database ... 11618 files and directories currently installed.)
Preparing to replace adduser 3.87 (using .../archives/adduser_3.95_all.deb) ...
Unpacking replacement adduser ...
+Preparing to replace libdb4.3 4.3.29-5 (using .../libdb4.3_4.3.29-6_amd64.deb) ...
+Unpacking replacement libdb4.3 ...
+Preparing to replace apt-utils 0.6.44.2 (using .../apt-utils_0.6.45_amd64.deb) ...
+Unpacking replacement apt-utils ...
Preparing to replace cron 3.0pl1-94 (using .../cron_3.0pl1-95_amd64.deb) ...
Unpacking replacement cron ...
Preparing to replace libconsole 1:0.2.3dbs-63 (using .../libconsole_1%3a0.2.3dbs-64_amd64.deb) ...
Unpacking replacement libconsole ...
-Preparing to replace libgcrypt11 1.2.2-1 (using .../libgcrypt11_1.2.2-2_amd64.deb) ...
+Preparing to replace libgcrypt11 1.2.2-1 (using .../libgcrypt11_1.2.2-3_amd64.deb) ...
Unpacking replacement libgcrypt11 ...
-Preparing to replace libtasn1-3 0.3.5-1 (using .../libtasn1-3_0.3.5-2_amd64.deb) ...
-Unpacking replacement libtasn1-3 ...
-Preparing to replace libgnutls13 1.4.0-3 (using .../libgnutls13_1.4.1-1_amd64.deb) ...
-Unpacking replacement libgnutls13 ...
Preparing to replace libldap-2.3-0 2.3.24-1 (using .../libldap-2.3-0_2.3.24-2_amd64.deb) ...
Unpacking replacement libldap-2.3-0 ...
+Preparing to replace libtasn1-3 0.3.5-1 (using .../libtasn1-3_0.3.5-2_amd64.deb) ...
+Unpacking replacement libtasn1-3 ...
Preparing to replace libtasn1-3-bin 0.3.5-1 (using .../libtasn1-3-bin_0.3.5-2_amd64.deb) ...
Unpacking replacement libtasn1-3-bin ...
-Preparing to replace tasksel-data 2.50 (using .../tasksel-data_2.51_all.deb) ...
+Preparing to replace manpages 2.34-1 (using .../manpages_2.36-1_all.deb) ...
+Unpacking replacement manpages ...
+Preparing to replace tasksel-data 2.51 (using .../tasksel-data_2.53_all.deb) ...
Unpacking replacement tasksel-data ...
-Preparing to replace tasksel 2.50 (using .../archives/tasksel_2.51_all.deb) ...
+Preparing to replace tasksel 2.51 (using .../archives/tasksel_2.53_all.deb) ...
Unpacking replacement tasksel ...
-Preparing to replace libnewt0.52 0.52.2-4 (using .../libnewt0.52_0.52.2-5_amd64.deb) ...
+Preparing to replace libnewt0.52 0.52.2-4 (using .../libnewt0.52_0.52.2-5.1_amd64.deb) ...
Unpacking replacement libnewt0.52 ...
-Preparing to replace whiptail 0.52.2-4 (using .../whiptail_0.52.2-5_amd64.deb) ...
+Preparing to replace whiptail 0.52.2-4 (using .../whiptail_0.52.2-5.1_amd64.deb) ...
Unpacking replacement whiptail ...
Preparing to replace dselect 1.13.21 (using .../dselect_1.13.22_amd64.deb) ...
Unpacking replacement dselect ...
-Preparing to replace libdb4.3 4.3.29-4.1 (using .../libdb4.3_4.3.29-5_amd64.deb) ...
-Unpacking replacement libdb4.3 ...
-Preparing to replace libtext-charwidth-perl 0.04-3 (using .../libtext-charwidth-perl_0.04-4_amd64.deb) ...
-Unpacking replacement libtext-charwidth-perl ...
-Preparing to replace libtext-iconv-perl 1.4-2 (using .../libtext-iconv-perl_1.4-3_amd64.deb) ...
-Unpacking replacement libtext-iconv-perl ...
+Preparing to replace binutils 2.17-1 (using .../binutils_2.17-2_amd64.deb) ...
+Unpacking replacement binutils ...
Selecting previously deselected package cpp-4.1.
Unpacking cpp-4.1 (from .../cpp-4.1_4.1.1-9_amd64.deb) ...
Preparing to replace cpp 4:4.0.3-4 (using .../cpp_4%3a4.1.1-5_amd64.deb) ...
@@ -129,8 +183,6 @@
Unpacking g++-4.1 (from .../g++-4.1_4.1.1-9_amd64.deb) ...
Preparing to replace g++ 4:4.0.3-4 (using .../g++_4%3a4.1.1-5_amd64.deb) ...
Unpacking replacement g++ ...
-Preparing to replace linux-kernel-headers 2.6.17.3-1 (using .../linux-kernel-headers_2.6.17.6-1_amd64.deb) ...
-Unpacking replacement linux-kernel-headers ...
Preparing to replace build-essential 11.2 (using .../build-essential_11.3_amd64.deb) ...
Unpacking replacement build-essential ...
Preparing to replace g++-4.0 4.0.3-3 (using .../g++-4.0_4.0.3-5_amd64.deb) ...
@@ -143,33 +195,32 @@
Unpacking replacement cpp-4.0 ...
Preparing to replace gcc-4.0-base 4.0.3-3 (using .../gcc-4.0-base_4.0.3-5_amd64.deb) ...
Unpacking replacement gcc-4.0-base ...
-Preparing to replace libdb4.2 4.2.52-23.1 (using .../libdb4.2_4.2.52+dfsg-0.1_amd64.deb) ...
+Preparing to replace libdb4.2 4.2.52-23.1 (using .../libdb4.2_4.2.52+dfsg-1_amd64.deb) ...
Unpacking replacement libdb4.2 ...
-Setting up libdb4.4 (4.4.20-6) ...
-Setting up passwd (4.0.17-2) ...
-
-Setting up adduser (3.95) ...
-
-Setting up cron (3.0pl1-95) ...
+Setting up libdb4.4 (4.4.20-7) ...
+Setting up linux-kernel-headers (2.6.17.6-1) ...
+Setting up libc6-dev (2.3.6-16) ...
+Setting up libtext-iconv-perl (1.4-3) ...
+Setting up libtext-charwidth-perl (0.04-4) ...
+Setting up libdb4.3 (4.3.29-6) ...
+Setting up apt-utils (0.6.45) ...
Setting up libconsole (0.2.3dbs-64) ...
-Setting up libgcrypt11 (1.2.2-2) ...
-
-Setting up libtasn1-3 (0.3.5-2) ...
-
-Setting up libgnutls13 (1.4.1-1) ...
+Setting up libgcrypt11 (1.2.2-3) ...
Setting up libldap-2.3-0 (2.3.24-2) ...
+Setting up libtasn1-3 (0.3.5-2) ...
+
Setting up libtasn1-3-bin (0.3.5-2) ...
-Setting up libnewt0.52 (0.52.2-5) ...
+Setting up manpages (2.36-1) ...
+Setting up libnewt0.52 (0.52.2-5.1) ...
-Setting up whiptail (0.52.2-5) ...
+Setting up whiptail (0.52.2-5.1) ...
Setting up dselect (1.13.22) ...
-Setting up libdb4.3 (4.3.29-5) ...
-Setting up libtext-charwidth-perl (0.04-4) ...
-Setting up libtext-iconv-perl (1.4-3) ...
+Setting up binutils (2.17-2) ...
+
Setting up cpp-4.1 (4.1.1-9) ...
Setting up cpp (4.1.1-5) ...
@@ -178,16 +229,24 @@
Setting up gcc-4.1 (4.1.1-9) ...
Setting up gcc (4.1.1-5) ...
-Setting up linux-kernel-headers (2.6.17.6-1) ...
Setting up gcc-4.0-base (4.0.3-5) ...
Setting up cpp-4.0 (4.0.3-5) ...
Setting up gcc-4.0 (4.0.3-5) ...
-Setting up libdb4.2 (4.2.52+dfsg-0.1) ...
+Setting up libdb4.2 (4.2.52+dfsg-1) ...
+Setting up debconf-i18n (1.5.3) ...
+Setting up tasksel-data (2.53) ...
Setting up libstdc++6-4.1-dev (4.1.1-9) ...
Setting up g++-4.0 (4.0.3-5) ...
Setting up perl-modules (5.8.8-6) ...
-Setting up tasksel-data (2.51) ...
+Setting up debconf (1.5.3) ...
+
+Setting up adduser (3.95) ...
+
+Setting up cron (3.0pl1-95) ...
+
+Setting up tasksel (2.53) ...
+
Setting up g++-4.1 (4.1.1-9) ...
Setting up g++ (4.1.1-5) ...
@@ -195,8 +254,6 @@
Setting up perl (5.8.8-6) ...
-Setting up tasksel (2.51) ...
-
Setting up dpkg-dev (1.13.22) ...
Setting up build-essential (11.3) ...
Reading package lists...
@@ -206,15 +263,18 @@
apt is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Copying back the cached apt archive contents
+ -> new cache content debconf-i18n_1.5.3_all.deb added
+ -> new cache content debconf_1.5.3_all.deb added
+ -> new cache content libgcrypt11_1.2.2-3_amd64.deb added
umount: /sys: not mounted
umount: /run: not found
umount: /proc/bus/usb: not mounted
umount: /dev/shm: not mounted
cat: /var/run/inetd.pid: No such file or directory
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
- -> user script /var/cache/pbuilder/build//29957/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
+ -> user script /var/cache/pbuilder/build//23902/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
- -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> cleaning the build env
- -> removing directory /var/cache/pbuilder/build//29957 and its subdirectories
+ -> removing directory /var/cache/pbuilder/build//23902 and its subdirectories
1.76 +10 -10 pbuilder/testsuite/normal/pbuilder-update-etch-sid-experimental.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid-experimental.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid-experimental.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid-experimental.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pbuilder-update-etch-sid-experimental.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-update-etch-sid-experimental.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pbuilder-update-etch-sid-experimental.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pbuilder-update-etch-sid-experimental.log 30 Jul 2006 04:04:29 -0000 1.76
@@ -1,6 +1,6 @@
Upgrading for distribution sid
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -15,8 +15,8 @@
Hit http://ftp.jp.debian.org sid Release
Get:3 http://ftp.jp.debian.org experimental Release [26.7kB]
Get:4 http://ftp.jp.debian.org sid/main Packages/DiffIndex [12.6kB]
-Get:5 http://ftp.jp.debian.org experimental/main Packages [70.3kB]
-Fetched 110kB in 0s (115kB/s)
+Get:5 http://ftp.jp.debian.org experimental/main Packages [63.3kB]
+Fetched 103kB in 0s (183kB/s)
Reading package lists...
dpkg - warning: ignoring request to remove lilo which isn't installed.
Obtaining the cached apt archive contents
@@ -26,11 +26,11 @@
libc6 libc6-dev
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/6849kB of archives.
-After unpacking 1778kB of additional disk space will be used.
-(Reading database ... 12215 files and directories currently installed.)
-Preparing to replace libc6-dev 2.3.6-15 (using .../libc6-dev_2.3.999.2-8_amd64.deb) ...
+After unpacking 1876kB of additional disk space will be used.
+(Reading database ... 12221 files and directories currently installed.)
+Preparing to replace libc6-dev 2.3.6-16 (using .../libc6-dev_2.3.999.2-8_amd64.deb) ...
Unpacking replacement libc6-dev ...
-Preparing to replace libc6 2.3.6-15 (using .../libc6_2.3.999.2-8_amd64.deb) ...
+Preparing to replace libc6 2.3.6-16 (using .../libc6_2.3.999.2-8_amd64.deb) ...
Unpacking replacement libc6 ...
Setting up libc6 (2.3.999.2-8) ...
init: timeout opening/writing control channel /dev/initctl
@@ -49,9 +49,9 @@
umount: /dev/shm: not mounted
cat: /var/run/inetd.pid: No such file or directory
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
- -> user script /var/cache/pbuilder/build//31105/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
+ -> user script /var/cache/pbuilder/build//25359/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
- -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> cleaning the build env
- -> removing directory /var/cache/pbuilder/build//31105 and its subdirectories
+ -> removing directory /var/cache/pbuilder/build//25359 and its subdirectories
1.100 +2 -2 pbuilder/testsuite/normal/pbuilder-execute-sid.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-sid.log?annotate=1.100&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-sid.log?rev=1.100&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-sid.log.diff?r1=1.100&r2=1.99&cvsroot=
-----------------------------------
Index: pbuilder-execute-sid.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-sid.log,v
retrieving revision 1.99
retrieving revision 1.100
diff -u -r1.99 -r1.100
--- pbuilder-execute-sid.log 25 Jul 2006 23:38:43 -0000 1.99
+++ pbuilder-execute-sid.log 30 Jul 2006 04:04:29 -0000 1.100
@@ -1,5 +1,5 @@
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -12,4 +12,4 @@
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-> cleaning the build env
- -> removing directory /var/cache/pbuilder/build//30299 and its subdirectories
+ -> removing directory /var/cache/pbuilder/build//23891 and its subdirectories
1.76 +2 -2 pbuilder/testsuite/normal/pbuilder-execute-etch.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-etch.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-etch.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-etch.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pbuilder-execute-etch.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-execute-etch.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pbuilder-execute-etch.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pbuilder-execute-etch.log 30 Jul 2006 04:04:29 -0000 1.76
@@ -1,5 +1,5 @@
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -12,4 +12,4 @@
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-> cleaning the build env
- -> removing directory /var/cache/pbuilder/build//29486 and its subdirectories
+ -> removing directory /var/cache/pbuilder/build//23387 and its subdirectories
1.100 +13 -20 pbuilder/testsuite/normal/pbuilder-create-sid.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-create-sid.log?annotate=1.100&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-create-sid.log?rev=1.100&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-create-sid.log.diff?r1=1.100&r2=1.99&cvsroot=
-----------------------------------
Index: pbuilder-create-sid.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-create-sid.log,v
retrieving revision 1.99
retrieving revision 1.100
diff -u -r1.99 -r1.100
--- pbuilder-create-sid.log 25 Jul 2006 23:38:43 -0000 1.99
+++ pbuilder-create-sid.log 30 Jul 2006 04:04:29 -0000 1.100
@@ -589,7 +589,7 @@
umount: proc: not mounted
umount: proc: not mounted
umount: /dev/pts: not mounted
- -> user script /var/cache/pbuilder/build//31553/tmp/hooks/G50-initscripts-2.86.ds1-11-cdebootstrap0.3.9.sh finished
+ -> user script /var/cache/pbuilder/build//24925/tmp/hooks/G50-initscripts-2.86.ds1-11-cdebootstrap0.3.9.sh finished
Refreshing the base.tgz
-> upgrading packages
-> mounting /proc filesystem
@@ -598,7 +598,7 @@
Get:1 http://ftp.jp.debian.org sid Release.gpg [189B]
Hit http://ftp.jp.debian.org sid Release
Get:2 http://ftp.jp.debian.org sid/main Packages/DiffIndex [12.6kB]
-Fetched 12.8kB in 0s (24.2kB/s)
+Fetched 12.8kB in 0s (38.7kB/s)
Reading package lists...
dpkg - warning: ignoring request to remove lilo which isn't installed.
Obtaining the cached apt archive contents
@@ -624,13 +624,11 @@
libc6-dev libdb4.4 libssp0 libstdc++6-4.1-dev linux-kernel-headers make
patch perl perl-modules
0 upgraded, 18 newly installed, 0 to remove and 0 not upgraded.
-Need to get 1820kB/21.7MB of archives.
+Need to get 0B/21.7MB of archives.
After unpacking 87.1MB of additional disk space will be used.
-Get:1 http://ftp.jp.debian.org sid/main linux-kernel-headers 2.6.17.6-1 [1820kB]
-Fetched 1820kB in 1s (974kB/s)
Selecting previously deselected package binutils.
-(Reading database ... 7042 files and directories currently installed.)
-Unpacking binutils (from .../binutils_2.17-1_amd64.deb) ...
+(Reading database ... 7048 files and directories currently installed.)
+Unpacking binutils (from .../binutils_2.17-2_amd64.deb) ...
Selecting previously deselected package cpp-4.1.
Unpacking cpp-4.1 (from .../cpp-4.1_4.1.1-9_amd64.deb) ...
Selecting previously deselected package cpp.
@@ -638,7 +636,7 @@
Selecting previously deselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.8.8-6_all.deb) ...
Selecting previously deselected package libdb4.4.
-Unpacking libdb4.4 (from .../libdb4.4_4.4.20-6_amd64.deb) ...
+Unpacking libdb4.4 (from .../libdb4.4_4.4.20-7_amd64.deb) ...
Selecting previously deselected package perl.
Unpacking perl (from .../perl_5.8.8-6_amd64.deb) ...
Selecting previously deselected package patch.
@@ -656,7 +654,7 @@
Selecting previously deselected package linux-kernel-headers.
Unpacking linux-kernel-headers (from .../linux-kernel-headers_2.6.17.6-1_amd64.deb) ...
Selecting previously deselected package libc6-dev.
-Unpacking libc6-dev (from .../libc6-dev_2.3.6-15_amd64.deb) ...
+Unpacking libc6-dev (from .../libc6-dev_2.3.6-16_amd64.deb) ...
Selecting previously deselected package libstdc++6-4.1-dev.
Unpacking libstdc++6-4.1-dev (from .../libstdc++6-4.1-dev_4.1.1-9_amd64.deb) ...
Selecting previously deselected package g++-4.1.
@@ -665,12 +663,12 @@
Unpacking g++ (from .../g++_4%3a4.1.1-5_amd64.deb) ...
Selecting previously deselected package build-essential.
Unpacking build-essential (from .../build-essential_11.3_amd64.deb) ...
-Setting up binutils (2.17-1) ...
+Setting up binutils (2.17-2) ...
Setting up cpp-4.1 (4.1.1-9) ...
Setting up cpp (4.1.1-5) ...
-Setting up libdb4.4 (4.4.20-6) ...
+Setting up libdb4.4 (4.4.20-7) ...
Setting up patch (2.5.9-4) ...
Setting up make (3.81-2) ...
Setting up libssp0 (4.1.1-9) ...
@@ -679,7 +677,7 @@
Setting up gcc (4.1.1-5) ...
Setting up linux-kernel-headers (2.6.17.6-1) ...
-Setting up libc6-dev (2.3.6-15) ...
+Setting up libc6-dev (2.3.6-16) ...
Setting up perl-modules (5.8.8-6) ...
Setting up libstdc++6-4.1-dev (4.1.1-9) ...
Setting up perl (5.8.8-6) ...
@@ -690,20 +688,15 @@
Setting up build-essential (11.3) ...
Copying back the cached apt archive contents
- -> new cache content libtasn1-3_0.3.5-2_amd64.deb added
- -> new cache content libtasn1-3-bin_0.3.5-2_amd64.deb added
- -> new cache content tasksel_2.51_all.deb added
- -> new cache content tasksel-data_2.51_all.deb added
- -> new cache content linux-kernel-headers_2.6.17.6-1_amd64.deb added
umount: /sys: not mounted
umount: /run: not found
umount: /proc/bus/usb: not mounted
umount: /dev/shm: not mounted
cat: /var/run/inetd.pid: No such file or directory
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
- -> user script /var/cache/pbuilder/build//31553/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
+ -> user script /var/cache/pbuilder/build//24925/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
- -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> cleaning the build env
- -> removing directory /var/cache/pbuilder/build//31553 and its subdirectories
+ -> removing directory /var/cache/pbuilder/build//24925 and its subdirectories
1.76 +6 -6 pbuilder/testsuite/normal/pbuilder-create-etch.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-create-etch.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-create-etch.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-create-etch.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pbuilder-create-etch.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-create-etch.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pbuilder-create-etch.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pbuilder-create-etch.log 30 Jul 2006 04:04:29 -0000 1.76
@@ -589,7 +589,7 @@
umount: proc: not mounted
umount: proc: not mounted
umount: /dev/pts: not mounted
- -> user script /var/cache/pbuilder/build//30769/tmp/hooks/G50-initscripts-2.86.ds1-11-cdebootstrap0.3.9.sh finished
+ -> user script /var/cache/pbuilder/build//24407/tmp/hooks/G50-initscripts-2.86.ds1-11-cdebootstrap0.3.9.sh finished
Refreshing the base.tgz
-> upgrading packages
-> mounting /proc filesystem
@@ -598,7 +598,7 @@
Get:1 http://ftp.jp.debian.org etch Release.gpg [189B]
Hit http://ftp.jp.debian.org etch Release
Get:2 http://ftp.jp.debian.org etch/main Packages/DiffIndex [12.6kB]
-Fetched 12.8kB in 0s (52.3kB/s)
+Fetched 12.8kB in 0s (47.7kB/s)
Reading package lists...
dpkg - warning: ignoring request to remove lilo which isn't installed.
Obtaining the cached apt archive contents
@@ -627,7 +627,7 @@
Need to get 0B/21.3MB of archives.
After unpacking 84.4MB of additional disk space will be used.
Selecting previously deselected package binutils.
-(Reading database ... 7019 files and directories currently installed.)
+(Reading database ... 7024 files and directories currently installed.)
Unpacking binutils (from .../binutils_2.17-1_amd64.deb) ...
Selecting previously deselected package gcc-4.0-base.
Unpacking gcc-4.0-base (from .../gcc-4.0-base_4.0.3-3_amd64.deb) ...
@@ -695,9 +695,9 @@
umount: /dev/shm: not mounted
cat: /var/run/inetd.pid: No such file or directory
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
- -> user script /var/cache/pbuilder/build//30769/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
+ -> user script /var/cache/pbuilder/build//24407/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
- -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> creating base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> cleaning the build env
- -> removing directory /var/cache/pbuilder/build//30769 and its subdirectories
+ -> removing directory /var/cache/pbuilder/build//24407 and its subdirectories
1.100 +16 -18 pbuilder/testsuite/normal/pbuilder-build-dsh-sid.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-sid.log?annotate=1.100&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-sid.log?rev=1.100&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-sid.log.diff?r1=1.100&r2=1.99&cvsroot=
-----------------------------------
Index: pbuilder-build-dsh-sid.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-sid.log,v
retrieving revision 1.99
retrieving revision 1.100
diff -u -r1.99 -r1.100
--- pbuilder-build-dsh-sid.log 25 Jul 2006 23:38:43 -0000 1.99
+++ pbuilder-build-dsh-sid.log 30 Jul 2006 04:04:29 -0000 1.100
@@ -2,10 +2,10 @@
pbuilder-buildpackage/amd64 $Id$
$Id$
-Current time: Tue Jul 25 12:02:49 JST 2006
-pbuilder-time-stamp: 1153796569
+Current time: Sun Jul 30 12:02:52 JST 2006
+pbuilder-time-stamp: 1154228572
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -34,7 +34,7 @@
Need to get 0B/2913kB of archives.
After unpacking 9646kB of additional disk space will be used.
Selecting previously deselected package libmagic1.
-(Reading database ... 11857 files and directories currently installed.)
+(Reading database ... 11863 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-2_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-2_amd64.deb) ...
@@ -71,21 +71,18 @@
The following NEW packages will be installed:
fakeroot
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Need to get 97.4kB of archives.
+Need to get 0B/97.4kB of archives.
After unpacking 406kB of additional disk space will be used.
-Get:1 http://ftp.jp.debian.org sid/main fakeroot 1.5.10 [97.4kB]
-Fetched 97.4kB in 0s (323kB/s)
Selecting previously deselected package fakeroot.
-(Reading database ... 12454 files and directories currently installed.)
+(Reading database ... 12460 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.10_amd64.deb) ...
Setting up fakeroot (1.5.10) ...
Copying back the cached apt archive contents
- -> new cache content fakeroot_1.5.10_amd64.deb added
Copying source file
- -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/dsh_0.25.6-1.dsc]
- -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/dsh_0.25.6.orig.tar.gz]
- -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/dsh_0.25.6-1.diff.gz]
+ -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/dsh_0.25.6-1.dsc]
+ -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/dsh_0.25.6.orig.tar.gz]
+ -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/dsh_0.25.6-1.diff.gz]
Extracting source
dpkg-source: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
gpg: new configuration file `/tmp/buildd/.gnupg/gpg.conf' created
@@ -408,7 +405,7 @@
2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
-Tue Jul 25 03:03:26 UTC 2006
+Sun Jul 30 03:03:49 UTC 2006
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
@@ -478,13 +475,14 @@
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
-Tue Jul 25 03:03:31 UTC 2006
+Sun Jul 30 03:03:54 UTC 2006
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
+c: c
+dsh: Process terminated (before write).
a: a
b: b
-c: c
PASS: tests/segv-catcher.sh
l w
PASS: tests/test-bufferoverflow.sh
@@ -608,7 +606,7 @@
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-Current time: Tue Jul 25 12:03:33 JST 2006
-pbuilder-time-stamp: 1153796613
+Current time: Sun Jul 30 12:03:56 JST 2006
+pbuilder-time-stamp: 1154228636
-> cleaning the build env
- -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/11599 and its subdirectories
+ -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/4972 and its subdirectories
1.76 +14 -18 pbuilder/testsuite/normal/pbuilder-build-dsh-etch.log
CVSWEB Options: -------------------
CVSWeb: Annotate this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-etch.log?annotate=1.76&cvsroot=
CVSWeb: View this file: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-etch.log?rev=1.76&content-type=text/x-cvsweb-markup&cvsroot=
CVSWeb: Diff to previous version: http://cvs.alioth.debian.org/cgi-bin/cvsweb.cgi/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-etch.log.diff?r1=1.76&r2=1.75&cvsroot=
-----------------------------------
Index: pbuilder-build-dsh-etch.log
===================================================================
RCS file: /cvsroot/pbuilder/pbuilder/testsuite/normal/pbuilder-build-dsh-etch.log,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- pbuilder-build-dsh-etch.log 25 Jul 2006 23:38:43 -0000 1.75
+++ pbuilder-build-dsh-etch.log 30 Jul 2006 04:04:30 -0000 1.76
@@ -2,10 +2,10 @@
pbuilder-buildpackage/amd64 $Id$
$Id$
-Current time: Tue Jul 25 12:07:43 JST 2006
-pbuilder-time-stamp: 1153796863
+Current time: Sun Jul 30 12:08:45 JST 2006
+pbuilder-time-stamp: 1154228925
Building the build Environment
- -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/testimage]
+ -> extracting base tarball [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/testimage]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
@@ -34,7 +34,7 @@
Need to get 0B/2913kB of archives.
After unpacking 9646kB of additional disk space will be used.
Selecting previously deselected package libmagic1.
-(Reading database ... 11581 files and directories currently installed.)
+(Reading database ... 11586 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-2_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-2_amd64.deb) ...
@@ -74,18 +74,16 @@
Need to get 0B/96.5kB of archives.
After unpacking 401kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
-(Reading database ... 12178 files and directories currently installed.)
+(Reading database ... 12183 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.9_amd64.deb) ...
Setting up fakeroot (1.5.9) ...
Copying back the cached apt archive contents
Copying source file
- -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/dsh_0.25.6-1.dsc]
- -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/dsh_0.25.6.orig.tar.gz]
- -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/dsh_0.25.6-1.diff.gz]
+ -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/dsh_0.25.6-1.dsc]
+ -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/dsh_0.25.6.orig.tar.gz]
+ -> copying [/home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/dsh_0.25.6-1.diff.gz]
Extracting source
-su: Authentication service cannot retrieve authentication info.
-(Ignored)
dpkg-source: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
gpg: new configuration file `/tmp/buildd/.gnupg/gpg.conf' created
gpg: WARNING: options in `/tmp/buildd/.gnupg/gpg.conf' are not yet active during this run
@@ -95,8 +93,6 @@
dpkg-source: unpacking dsh_0.25.6.orig.tar.gz
dpkg-source: applying ./dsh_0.25.6-1.diff.gz
-> Building the package
-su: Authentication service cannot retrieve authentication info.
-(Ignored)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)
dpkg-buildpackage: source package is dsh
@@ -409,7 +405,7 @@
2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
-Tue Jul 25 03:08:16 UTC 2006
+Sun Jul 30 03:09:28 UTC 2006
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
@@ -479,14 +475,14 @@
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
-Tue Jul 25 03:08:21 UTC 2006
+Sun Jul 30 03:09:33 UTC 2006
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
a: a
+b: b
c: c
dsh: Process terminated (before write).
-b: b
PASS: tests/segv-catcher.sh
l w
PASS: tests/test-bufferoverflow.sh
@@ -610,7 +606,7 @@
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-Current time: Tue Jul 25 12:08:24 JST 2006
-pbuilder-time-stamp: 1153796904
+Current time: Sun Jul 30 12:09:38 JST 2006
+pbuilder-time-stamp: 1154228978
-> cleaning the build env
- -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.FURYo31548/dir1/10801 and its subdirectories
+ -> removing directory /home/dancer/cvscheckout/external/pbuilder/pbuilder/testsuite/tmp.qenVx24920/dir1/4449 and its subdirectories
- Previous message: [Pbuilder-maint] FROM:DR HARUNA YAHAYA ,CHAIRMAN TASK FORCE ON
ECONOMIC RECOVERY. DEAR FRIEND,I AM THE CHAIRMAN OF THE ABOVE
COMMITEE TO RECOVER FUNDS THAT WAS STARCHED AWAY IN FOREIGN
COUNTRIES BY LATE HEAD OF STATE GEN. SANNI ABACHA AND HIS
COHORTS. IMMEDAITELY THE COMMITEE WAS INAUGURATED -1999/2000,
DURING OUR SELFLESS AND PATRIOTIC SERVICE TO OUR FATHERLAND,
WE RECOVERED SO MUCH FUND BUT BETWEEN 2003 TO PRESENT DATE,
WE ALSO OBSERVED THAT THE GOVERNMENT INSTEAD OF UTILIZING THE
RECOVERED FUNDS JUDICIOUSLY FOR THE WELL BEING OF ALL THE
CITIZENS WAS SHARING THE MONIES AMONG THEMSELVES. THIS CUT
THE ATTENTION OF MY COLLEAGUES AND MYSELF AND WE CONCLUDED
THAT THE TASK FORCE WAS SET UP AS A VENDETTA AGAINST THE
ABACHA FAMILY SINCE THEY WERE NOT THE ONLY PEOPLE THAT
SIPHONED MONEY ABROAD.AS A RESULT, MY COLLEAGUES AND I
DECIDED TO HELP OURSELVES WITH PART OF THE RECOVERED MONEY
THAT IS LYING WITH A SECURITY COMPANY IN EUROPE.THE MONEY
TOTALING ABOUT US$27MILLION WAS CAREFULLY ! PACK! ED IN 2
BOXES AND WAS DEPOSITED AS FAMILY TREASURE IN THE SECURITY
FIRM. WE REQUEST FOR YOUR ASSISTANCE TO SECURE THE MONEY INTO
YOUR ACCOUNT FOR PROTECTION UNTIL WE DISENGAGE FROM SERVICE
TO JOIN YOU IN YOUR COUNTRY FOR THE DISBURSMENT OF THE
FUND.IF YOU ARE SURE THAT YOU CAN HANDLE THIS PROJECT BY
TAKING THE POSTURE OF THE TRUE BENEFICIARY OF THE BOXES
WITHOUT EXPOSING OUR INVOLVEMENT TO ANYBODY, GET BACK TO ME
WITH THE FOLLOWING INFORMATION: FULL NAMES,
NATIONALITY,INTERNATIONAL PASSPORT/ID CARD ,COMPANY NAME AND
ADDRESS AND TELEPHONE FOR EASY COMMUNICATION WITH YOU .ONCE I
OBSERVE THIS INFORMATION, I WILL EQUIP YOU WITH THE CODE OF
DEPOSIT FOR YOU TO VISIT THE SECURITY COMPANY OFFCIE FOR THE
CLAIMS. FINALLY THIS IS A TOP PRIORITY AND NEED SINCERITY AND
SECRECY;
IF YOU ARE NOT INTERESTED OR CANNOT HANDLE THIS PROJECT, PLEASE DON'T
BOTHER YOURSELF TO WRITE BACK. SINCERELY, DR HARUNA YAHAYA
- Next message: [Pbuilder-maint] pbuilder CVS update:
pbuilder/testsuite/cdebootstrap pdebuild-normal-sid.log
pdebuild-normal-etch.log pdebuild-internal-sid.log
pdebuild-internal-etch.log pbuilder-update-etch-sid.log
pbuilder-update-etch-sid-experimental.log
pbuilder-execute-sid.log pbuilder-execute-etch.log
pbuilder-create-sid.log pbuilder-create-etch.log
pbuilder-build-dsh-sid.log pbuilder-build-dsh-etch.log
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the Pbuilder-maint
mailing list