[PATCH] update japanese po translation.
Junichi Uekawa
dancer at netfort.gr.jp
Fri Jun 27 06:36:31 UTC 2008
---
Documentation/pbuilder-doc.ja.po | 950 ++++++++++++++++++++++++--------------
1 files changed, 596 insertions(+), 354 deletions(-)
diff --git a/Documentation/pbuilder-doc.ja.po b/Documentation/pbuilder-doc.ja.po
index f0b9fc9..cc72153 100644
--- a/Documentation/pbuilder-doc.ja.po
+++ b/Documentation/pbuilder-doc.ja.po
@@ -7,8 +7,8 @@
msgid ""
msgstr ""
"Project-Id-Version: xxx\n"
-"POT-Creation-Date: 2008-03-07 09:25+0900\n"
-"PO-Revision-Date: 2008-01-04 20:06+0900\n"
+"POT-Creation-Date: 2008-05-09 00:50+0900\n"
+"PO-Revision-Date: 2008-06-27 15:35+0900\n"
"Last-Translator: Junichi Uekawa <dancer at debian.org>\n"
"Language-Team: Junichi Uekawa <dancer at debian.org>\n"
"MIME-Version: 1.0\n"
@@ -171,6 +171,11 @@ msgstr "--distribution"
msgid "</command> command-line option."
msgstr "</command>$B%3%^%s%I%i%$%s%*%W%7%g%s$G;XDj$9$kI,MW$,$"$j$^$9!#(B"
+# type: Content of: <book><chapter><sect1><para><footnote>
+#: pbuilder-doc.xml:93
+msgid "<command>debootstrap</command> <footnote>"
+msgstr ""
+
# type: Content of: <book><chapter><sect1><para><footnote><para>
#: pbuilder-doc.xml:94
msgid "debootstrap or cdebootstrap can be chosen"
@@ -271,6 +276,11 @@ msgstr ""
"$B$F$$$^$;$s!J8=;~E@$G$O!)!K!#(B"
# type: Content of: <book><chapter><sect1><para>
+#: pbuilder-doc.xml:137 pbuilder-doc.xml:1227
+msgid "</footnote>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><para>
#: pbuilder-doc.xml:140 pbuilder-doc.xml:172
msgid ""
"For fuller documentation of command-line options, see the pbuilder.8 manual "
@@ -313,7 +323,7 @@ msgid "--buildresult"
msgstr "--buildresult"
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:160 pbuilder-doc.xml:1523
+#: pbuilder-doc.xml:160 pbuilder-doc.xml:1504
msgid "The <command>"
msgstr "<command>"
@@ -396,7 +406,7 @@ msgid ""
"There is a slightly different mode of operation available in "
"<command>pdebuild</command> since version 0.97. <command>pdebuild</command> "
"usually runs <command>debian/rules clean</command> outside of the chroot; "
-"however, it is possible to change the behaviour to run it inside the chroot "
+"however, it is possible to change the behavior to run it inside the chroot "
"with the <command>"
msgstr ""
" <command>pdebuild</command> 0.97 $B$+$i0l$D0c$&<B9T%b!<%I$,DI2C$5$l$F$$$^(B"
@@ -405,7 +415,7 @@ msgstr ""
"$B30It$G<B9T$9$k$N$G$9$,!"(Bchroot$BFbIt$G<B9T$9$k$h$&$K(B <command>"
# type: Content of: <book><chapter><sect1><para><option>
-#: pbuilder-doc.xml:205 pbuilder-doc.xml:1177
+#: pbuilder-doc.xml:205 pbuilder-doc.xml:1166
msgid "--use-pdebuild-internal"
msgstr "--use-pdebuild-internal"
@@ -502,7 +512,7 @@ msgid "It is useful to use"
msgstr "$BJL$N%G%#%9%H%j%S%e!<%7%g%s8~$1$KJ#?t$N at _Dj%U%!%$%k$r3hMQ$9$k$?$a$K$O(B"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para><command><option>
-#: pbuilder-doc.xml:257 pbuilder-doc.xml:674
+#: pbuilder-doc.xml:257 pbuilder-doc.xml:670
msgid "--configfile"
msgstr "--configfile"
@@ -703,7 +713,6 @@ msgstr ""
# type: Content of: <book><chapter><sect1><para>
#: pbuilder-doc.xml:366
-#, fuzzy
msgid ""
"A script that was used by Junichi Uekawa in the initial run is now included "
"in the <command>pbuilder</command> distribution, as <command>pbuildd.sh</"
@@ -714,14 +723,7 @@ msgid ""
"while, and it should be possible to set the application up on your system "
"also. This version of the code is not the most tested, but should function "
"as a starter."
-msgstr ""
-"$B>e at n$,MxMQ$7$?%9%/%j%W%H$O:#(B <command>pbuilder</command> $B%G%#%9%H%j%S%e!<%7%g(B"
-"$B%s$K4^$^$l$F$$$^$9!#(B<filename>/usr/share/doc/pbuilder/examples/pbuildd/</"
-"filename> $B$K$"$j!"@_Dj$O!"(B <filename>/etc/pbuilder/pbuildd-config.sh</"
-"command> $B$, at _Dj%U%!%$%k$G$9!#(B<command>pbuilder</command> $B$K$J$l$F$$$k?M$G$"$l(B"
-"$B$P4JC1$K at _Dj$9$k$3$H$,$G$-$k$O$:$G$9!#$7$P$i$/<B9T$5$l$F$$$?$?$a!"<+J,$N%7%9(B"
-"$B%F%`$G$b<B9T$G$-$k$G$7$g$&!#$?$@!"$^$@?7$7$$$N$GLdBj$,$"$l$P(B Debian BTS $B$KEP(B"
-"$BO?$7$F$/$@$5$$!#(B"
+msgstr "$B>e at n$,MxMQ$7$?%9%/%j%W%H$O:#(B <command>pbuilder</command> $B%G%#%9%H%j%S%e!<%7%g%s$K4^$^$l$F$$$^$9!#(B<filename>/usr/share/doc/pbuilder/examples/pbuildd/</filename> $B$K$"$j!"@_Dj$O!"(B <filename>/etc/pbuilder/pbuildd-config.sh</filename> $B$, at _Dj%U%!%$%k$G$9!#(B<command>pbuilder</command> $B$K$J$l$F$$$k?M$G$"$l$P4JC1$K at _Dj$9$k$3$H$,$G$-$k$O$:$G$9!#$7$P$i$/<B9T$5$l$F$$$?$?$a!"<+J,$N%7%9%F%`$G$b<B9T$G$-$k$G$7$g$&!#$?$@!"$^$@?7$7$$$N$GLdBj$,$"$l$P(B Debian BTS $B$KEPO?$7$F$/$@$5$$!#(B"
# type: Content of: <book><chapter><sect1><para>
#: pbuilder-doc.xml:376
@@ -761,7 +763,7 @@ msgstr ""
msgid ""
"Because not all builds are guaranteed to finish in a finite time, setting a "
"timeout is probably necessary, or pbuildd may stall with a bad build."
-msgstr ""
+msgstr "$B$9$Y$F$N%S%k%I$,M-8B;~4V$G40N;$9$k$3$H$,J]>Z$5$l$F$$$k$o$1$G$O$"$j$^$;$s!"$=$N$?$a%?%$%`%"%&%H$r=`Hw$7$F$*$/$3$H$,I,MW$+$b$7$l$^$;$s!#$=$&$7$J$$$H(Bpbuildd$B$O0-$$%S%k%I$G$:$C$HBT$A>uBV$K$J$k2DG=@-$b$"$j$^$9!#(B"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
#: pbuilder-doc.xml:398
@@ -769,7 +771,7 @@ msgid ""
"Some packages require a lot of disk space, around 2GB seems to be sufficient "
"for the largest packages for the time being. If you find otherwise, please "
"inform the maintainer of this documentation."
-msgstr ""
+msgstr "$B0lIt$N%Q%C%1!<%8$OBgNL$N%G%#%9%/NN0h$rI,MW$H$7$^$9!"8=;~E@$G$O:GBg$N%Q%C%1!<%8$G$"$C$F$b(B2GB$B$/$i$$$,==J,$J$h$&$G$9!#$b$7$=$&$G$J$$$H$$$&>u67$rH/8+$7$?>l9g$O$3$NJ8=q$N%a%s%F%J$KO"Mm$7$F$/$@$5$$!#(B"
# type: Content of: <book><chapter><sect1><title>
#: pbuilder-doc.xml:406
@@ -790,7 +792,7 @@ msgstr ""
msgid ""
"I would like some information on how people are doing it, I would appreciate "
"any feedback or information on how you are doing, or any examples."
-msgstr ""
+msgstr "$B$I$N$h$&$K<B:]$K$d$C$F$$$k$N$+>pJs$r$/$@$5$$!"%U%#!<%I%P%C%/$d>pJs$dNc$r4?7^$7$^$9!#(B"
# type: Content of: <book><chapter><sect1><title>
#: pbuilder-doc.xml:418
@@ -825,13 +827,10 @@ msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
#: pbuilder-doc.xml:433
-#, fuzzy
msgid ""
"Automatically running lintian (distributed as an example in <filename>/usr/"
"share/doc/pbuilder/examples/B90lintian</filename>)."
-msgstr ""
-"$B<+F0E*$K(Blintian/linda$B$r<B9T$9$k(B ($BNc$H$7$F(B <filename>/usr/share/doc/pbuilder/"
-"examples/B90linda</filename>$B$,G[I[$5$l$F$$$k(B)$B!#(B"
+msgstr "$B<+F0E*$K(Blintian$B$r<B9T$9$k(B ($BNc$H$7$F(B <filename>/usr/share/doc/pbuilder/examples/B90lintian</filename>$B$,G[I[$5$l$F$$$k(B)$B!#(B"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
#: pbuilder-doc.xml:437
@@ -840,20 +839,20 @@ msgid ""
"removed from Debian. A <command>pbuilder</command> implementation can be "
"found as debian/pbuilder-test directory, implemented through B92test-pkg "
"script."
-msgstr ""
+msgstr "$B<+F0E*$K%Q%C%1!<%8$N(B debian-test $B$r9T$&(B? debian-test $B%Q%C%1!<%8$O(B Debian $B$+$i:o=|$5$l$^$7$?!#(B <command>pbuilder</command> $B$G$NBeBX$O(B debian/pbuilder-test $B%G%#%l%/%H%j$K$"$j$^$9!#(BB92test-pkg$B%9%/%j%W%H$G<BAu$5$l$F$$$^$9!#(B"
# type: Content of: <book><chapter><sect1><para><footnote>
#: pbuilder-doc.xml:444
msgid ""
"To use B92test-pkg script, first, add it to your hook directory. <footnote>"
-msgstr ""
+msgstr "B92test-pkg $B$rMxMQ$9$k$?$a$K$O!"$^$:(BB92test-pkg $B%9%/%j%W%H$r%U%C%/%G%#%l%/%H%j$KDI2C$7$F$/$@$5$$!#(B <footnote>"
# type: Content of: <book><chapter><sect1><para><footnote><para>
#: pbuilder-doc.xml:446
msgid ""
"It is possible to specify <command>--hookdir /usr/share/doc/pbuilder/"
"examples</command> command-line option to include all example hooks as well."
-msgstr ""
+msgstr "<command>--hookdir /usr/share/doc/pbuilder/examples</command> $B%3%^%s%I%i%$%s%*%W%7%g%s$r;XDj$9$k$3$H$G$9$Y$F$N%5%s%W%k%U%C%/$rMxMQ$9$k$3$H$,2DG=$G$9!#(B"
# type: Content of: <book><chapter><sect1><para><footnote>
#: pbuilder-doc.xml:449
@@ -862,6 +861,8 @@ msgid ""
"pbuilder-test/NN_name</filename> (where NN is number) following run-parts "
"standard<footnote>"
msgstr ""
+"</footnote>$B!#(B\n"
+"$B%F%9%H%U%!%$%k$O(B <filename>debian/pbuilder-test/NN_name</filename> (NN: $BHV9f(B)$B$KG[CV$5$l$?%7%'%k%9%/%j%W%H$G$9!#%U%!%$%kL>5,B'$O(B run-parts $B$NI8=`$K$7$?$,$$$^$9!#(B<footnote>"
# type: Content of: <book><chapter><sect1><para><footnote><para>
#: pbuilder-doc.xml:454
@@ -911,19 +912,21 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:486
+#: pbuilder-doc.xml:485
#, no-wrap
msgid ""
+"\n"
"EXTRAPACKAGES=\"pentium-builder gcc-3.2 g++-3.2\"\n"
"export DEBIAN_BUILDARCH=athlon\n"
"export DEBIAN_BUILDGCCVER=3.2"
msgstr ""
+"\n"
"EXTRAPACKAGES=\"pentium-builder gcc-3.2 g++-3.2\"\n"
"export DEBIAN_BUILDARCH=athlon\n"
"export DEBIAN_BUILDGCCVER=3.2"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:492
+#: pbuilder-doc.xml:491
msgid ""
"It will instruct <command>pbuilder</command> to install the <command>pentium-"
"builder</command> package and also the GCC 3.2 compiler packages inside the "
@@ -932,12 +935,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:500
+#: pbuilder-doc.xml:499
msgid "Using User-mode-linux with pbuilder"
msgstr "user-mode-linux $B$r(B pbuilder $B$GMxMQ$9$k(B"
# type: Content of: <book><chapter><para>
-#: pbuilder-doc.xml:502
+#: pbuilder-doc.xml:501
msgid ""
"It is possible to use user-mode-linux by invoking <command>pbuilder-user-"
"mode-linux</command> instead of <command>pbuilder</command>. "
@@ -948,7 +951,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><para>
-#: pbuilder-doc.xml:512
+#: pbuilder-doc.xml:511
msgid ""
"<command>User-mode-linux</command> is a somewhat less proven platform than "
"the standard Unix tools which <command>pbuilder</command> relies on "
@@ -959,34 +962,34 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><para>
-#: pbuilder-doc.xml:523
+#: pbuilder-doc.xml:522
msgid ""
"The configuration of <command>pbuilder-user-mode-linux</command> goes in "
"three steps:"
msgstr ""
# type: Content of: <book><chapter><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:527
+#: pbuilder-doc.xml:526
msgid "Configuration of user-mode-linux"
msgstr "user-mode-linux $B$N at _Dj(B"
# type: Content of: <book><chapter><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:530
+#: pbuilder-doc.xml:529
msgid "Configuration of rootstrap"
msgstr "rootstrap $B$N at _Dj(B"
# type: Content of: <book><chapter><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:533
+#: pbuilder-doc.xml:532
msgid "Configuration of pbuilder-uml"
msgstr "pbuilder-uml $B$N at _Dj(B"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:538
+#: pbuilder-doc.xml:537
msgid "Configuring user-mode-linux"
msgstr "user-mode-linux $B$N at _Dj(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:540
+#: pbuilder-doc.xml:539
msgid ""
"user-mode-linux isn't completely trivial to set up. It would probably be "
"useful to acquaint yourself with it a bit before attempting to use "
@@ -997,26 +1000,26 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:550
+#: pbuilder-doc.xml:549
msgid ""
"<command>user-mode-linux</command> requires the user to be in the uml-net "
"group in order to configure the network unless you are using slirp."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:555
+#: pbuilder-doc.xml:554
msgid ""
"If you compile your own kernel, you may want to verify that you enable TUN/"
"TAP support, and you might want to consider the SKAS patch."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:561
+#: pbuilder-doc.xml:560
msgid "Configuring rootstrap"
msgstr "rootstrap $B$N at _Dj(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:563
+#: pbuilder-doc.xml:562
msgid ""
"<command>rootstrap</command> is a wrapper around debootstrap. It creates a "
"Debian disk image for use with UML. To configure rootstrap, there are "
@@ -1024,12 +1027,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:570
+#: pbuilder-doc.xml:569
msgid "Install the rootstrap package."
msgstr "rootstrap$B!!%Q%C%1!<%8$r%$%s%9%H!<%k$7$^$9!#(B"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:574
+#: pbuilder-doc.xml:573
msgid ""
"TUN/TAP only: add the user to the uml-net group to allow access to the "
"network"
@@ -1038,13 +1041,13 @@ msgstr ""
"$BMQ$G$-$k$h$&$K$7$^$9(B"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para><screen>
-#: pbuilder-doc.xml:577
+#: pbuilder-doc.xml:575
#, no-wrap
msgid "adduser dancer uml-net"
msgstr "adduser dancer uml-net"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:581
+#: pbuilder-doc.xml:579
msgid ""
"TUN/TAP only: Check that the kernel supports the TUN/TAP interface, or "
"recompile the kernel if necessary."
@@ -1053,7 +1056,7 @@ msgstr ""
"$B$k$3$H$r3NG'$7$F$/$@$5$$!#I,MW$G$"$l$P%+!<%M%k$r%j%S%k%I$7$F$/$@$5$$!#(B"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:587
+#: pbuilder-doc.xml:585
msgid ""
"Set up <filename>/etc/rootstrap/rootstrap.conf</filename>. For example, if "
"the current host is 192.168.1.2, changing following entries to something "
@@ -1061,9 +1064,10 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para><screen>
-#: pbuilder-doc.xml:592
+#: pbuilder-doc.xml:589
#, no-wrap
msgid ""
+"\n"
"transport=tuntap\n"
"interface=eth0\n"
"gateway=192.168.1.1\n"
@@ -1072,6 +1076,7 @@ msgid ""
"uml=192.168.1.199\n"
"netmask=255.255.255.0"
msgstr ""
+"\n"
"transport=tuntap\n"
"interface=eth0\n"
"gateway=192.168.1.1\n"
@@ -1081,45 +1086,46 @@ msgstr ""
"netmask=255.255.255.0"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:600
+#: pbuilder-doc.xml:597
msgid ""
"Some experimentation with configuration and running <command>rootstrap ~/"
"test.uml</command> to actually test it would be handy."
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:605
+#: pbuilder-doc.xml:602
msgid ""
"Using slirp requires less configuration. The default configuration comes "
"with a working example."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:612
+#: pbuilder-doc.xml:609
msgid "Configuring pbuilder-uml"
msgstr "pbuilder-uml $B$N at _Dj(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:614
+#: pbuilder-doc.xml:611
msgid "The following needs to happen:"
msgstr "$B0J2<$N at _Dj$,I,MW$G$9(B:"
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:617
+#: pbuilder-doc.xml:614
msgid "Install the pbuilder-uml package."
msgstr "pbuilder-uml $B$r%$%s%9%H!<%k$9$k(B"
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:621
+#: pbuilder-doc.xml:618
msgid ""
"Set up the configuration file <filename>/etc/pbuilder/pbuilder-uml.conf</"
"filename> in the following manner. It will be different for slirp."
msgstr ""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para><screen>
-#: pbuilder-doc.xml:625
+#: pbuilder-doc.xml:621
#, no-wrap
msgid ""
+"\n"
"MY_ETH0=tuntap,,,192.168.1.198\n"
"UML_IP=192.168.1.199\n"
"UML_NETMASK=255.255.255.0\n"
@@ -1128,6 +1134,7 @@ msgid ""
"UML_GATEWAY=192.168.1.1\n"
"PBUILDER_UML_IMAGE=\"/home/dancer/uml-image\""
msgstr ""
+"\n"
"MY_ETH0=tuntap,,,192.168.1.198\n"
"UML_IP=192.168.1.199\n"
"UML_NETMASK=255.255.255.0\n"
@@ -1137,51 +1144,51 @@ msgstr ""
"PBUILDER_UML_IMAGE=\"/home/dancer/uml-image\""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:633
+#: pbuilder-doc.xml:629
msgid "Also, it needs to match the rootstrap configuration."
msgstr ""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:638
+#: pbuilder-doc.xml:634
msgid ""
"Make sure BUILDPLACE is writable by the user. Change BUILDPLACE in the "
"configuration file to a place where the user has access."
msgstr ""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para><command>
-#: pbuilder-doc.xml:644
+#: pbuilder-doc.xml:640
msgid "Run <command>pbuilder-user-mode-linux"
msgstr ""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para><command><option>
-#: pbuilder-doc.xml:644
+#: pbuilder-doc.xml:640
msgid "create --distribution sid"
msgstr ""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:644
+#: pbuilder-doc.xml:640
msgid "</command> to create the image."
msgstr ""
# type: Content of: <book><chapter><sect1><para><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:647
+#: pbuilder-doc.xml:643
msgid "Try running <command>pbuilder-user-mode-linux build</command>."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:653
+#: pbuilder-doc.xml:649
msgid "Considerations for running pbuilder-user-mode-linux"
msgstr "pbuilder-user-mode-linux$B$r<B9T$9$k>l9g$N8!F$9`L\(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:655
+#: pbuilder-doc.xml:651
msgid ""
"<command>pbuilder-user-mode-linux</command> emulates most of "
"<command>pbuilder</command>, but there are some differences."
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:661
+#: pbuilder-doc.xml:657
msgid ""
"<command>pbuilder-user-mode-linux</command> does not support all options of "
"<command>pbuilder</command> properly yet. This is a problem, and will be "
@@ -1189,7 +1196,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para><command>
-#: pbuilder-doc.xml:668
+#: pbuilder-doc.xml:664
msgid ""
"/tmp is handled differently inside <command>pbuilder-user-mode-linux</"
"command>. In <command>pbuilder-user-mode-linux</command>, <filename>/tmp</"
@@ -1199,33 +1206,33 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:674
+#: pbuilder-doc.xml:670
msgid ""
"</command>, and when trying to build packages placed under <filename>/tmp</"
"filename>."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:682
+#: pbuilder-doc.xml:678
msgid "Parallel running of pbuilder-user-mode-linux"
-msgstr ""
+msgstr "pbuilder-user-mode-linux $B$rJ#?tF1;~$K<B9T$5$;$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:684
+#: pbuilder-doc.xml:680
msgid ""
"To run <command>pbuilder-user-mode-linux</command> in parallel on a system, "
"there are a few things to bear in mind."
-msgstr ""
+msgstr "<command>pbuilder-user-mode-linux</command> $B$rF10l%7%9%F%`>e$GF1;~$KJ#?t<B9T$5$;$k$K$O$$$/$D$+Cm0U$9$k$Y$-E@$,$"$j$^$9!#(B\n"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:689
+#: pbuilder-doc.xml:685
msgid ""
"The create and update methods must not be run when a build is in progress, "
"or the COW file will be invalidated."
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:694
+#: pbuilder-doc.xml:690
msgid ""
"If you are not using slirp, user-mode-linux processes which are running in "
"parallel need to have different IP addresses. Just trying to run the "
@@ -1234,65 +1241,71 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para><screen>
-#: pbuilder-doc.xml:700
+#: pbuilder-doc.xml:695
#, no-wrap
msgid ""
+"\n"
"for IP in 102 103 104 105; do\n"
" xterm -e pbuilder-user-mode-linux build --uml-ip 192.168.0.$IP \\\n"
" 20030107/whizzytex_1.1.1-1.dsc &\n"
"done"
msgstr ""
+"\n"
+"for IP in 102 103 104 105; do\n"
+" xterm -e pbuilder-user-mode-linux build --uml-ip 192.168.0.$IP \\\n"
+" 20030107/whizzytex_1.1.1-1.dsc &\n"
+"done"
# type: Content of: <book><chapter><sect1><itemizedlist><listitem><para>
-#: pbuilder-doc.xml:705
+#: pbuilder-doc.xml:700
msgid "When using slirp, this problem does not exist."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:711
+#: pbuilder-doc.xml:706
msgid ""
"Using pbuilder-user-mode-linux as a wrapper script to start up a virtual "
"machine"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:713
+#: pbuilder-doc.xml:708
msgid ""
"It is possible to use <command>pbuilder-user-mode-linux</command> for other "
"uses than just building Debian packages. <command>pbuilder-user-mode-linux"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:717 pbuilder-doc.xml:825
+#: pbuilder-doc.xml:712 pbuilder-doc.xml:818
msgid "login"
-msgstr ""
+msgstr "login"
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:717
+#: pbuilder-doc.xml:712
msgid ""
"</command> will let a user use a shell inside the user-mode-linux "
"<command>pbuilder</command> base image, and <command>pbuilder-user-mode-linux"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:720
+#: pbuilder-doc.xml:715
msgid "execute"
-msgstr ""
+msgstr "execute"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:720
+#: pbuilder-doc.xml:715
msgid "</command> will allow the user to execute a script inside the image."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:724
+#: pbuilder-doc.xml:719
msgid ""
"You can use the script to install ssh and add a new user, so that it is "
"possible to access inside the user-mode-linux through ssh."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:728
+#: pbuilder-doc.xml:723
msgid ""
"Note that it is not possible to use a script from <filename>/tmp</filename> "
"due to the way <command>pbuilder-user-mode-linux</command> mounts a tmpfs at "
@@ -1300,16 +1313,17 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:734
+#: pbuilder-doc.xml:729
msgid ""
"The following example script may be useful in starting a sshd inside user-"
"mode-linux."
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:738
+#: pbuilder-doc.xml:732
#, no-wrap
msgid ""
+"\n"
"#!/bin/bash\n"
"\n"
"apt-get install -y ssh xbase-clients xterm\n"
@@ -1325,24 +1339,24 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:754
+#: pbuilder-doc.xml:748
msgid "Frequently asked questions"
msgstr "FAQ $B!J$h$/$"$k<ALd!K(B"
# type: Content of: <book><chapter><para>
-#: pbuilder-doc.xml:757
+#: pbuilder-doc.xml:751
msgid ""
"Here, known problems and frequently asked questions are documented. This "
"portion was initially available in README.Debian file, but moved here."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:762
+#: pbuilder-doc.xml:756
msgid "pbuilder create fails"
msgstr "pbuilder create $B$,<:GT$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:764
+#: pbuilder-doc.xml:758
msgid ""
"It often happens that <command>pbuilder</command> cannot create the latest "
"chroot. Try upgrading <command>pbuilder</command> and debootstrap. It is "
@@ -1352,14 +1366,14 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:771
+#: pbuilder-doc.xml:765
msgid ""
"There are people who occasionally back port debootstrap to stable versions; "
"hunt for them."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:775
+#: pbuilder-doc.xml:769
msgid ""
"When there are errors with the debootstrap phase, the debootstrap script "
"needs to be fixed. <command>pbuilder</command> does not provide a way to "
@@ -1367,12 +1381,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:781
+#: pbuilder-doc.xml:775
msgid "Directories that cannot be bind-mounted"
-msgstr ""
+msgstr "bind mount $B$G$-$J$$%G%#%l%/%H%j(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:783
+#: pbuilder-doc.xml:777
msgid ""
"Because of the way <command>pbuilder</command> works, there are several "
"directories which cannot be bind-mounted when running <command>pbuilder</"
@@ -1383,12 +1397,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:794
+#: pbuilder-doc.xml:788
msgid "Logging in to pbuilder to investigate build failure"
-msgstr ""
+msgstr "$B%S%k%I<:GT$ND4::$N$?$a$K(B pbuilder $B4D6-$K%m%0%$%s$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:796
+#: pbuilder-doc.xml:790
msgid ""
"It is possible to invoke a shell session after a build failure. Example "
"hook script are provided as <filename>C10shell</filename> and "
@@ -1397,12 +1411,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:805
+#: pbuilder-doc.xml:799
msgid "Logging in to pbuilder to modify the environment"
-msgstr ""
+msgstr "$B4D6-$rJQ99$9$k$?$a$K(B pbuilder $B4D6-$K%m%0%$%s$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:807
+#: pbuilder-doc.xml:801
msgid ""
"It is sometimes necessary to modify the chroot environment. <command>login</"
"command> will remove the contents of the chroot after logout. It is "
@@ -1412,36 +1426,37 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:815
+#: pbuilder-doc.xml:808
#, no-wrap
msgid ""
+"\n"
"$ mkdir ~/loginhooks\n"
"$ cp C10shell ~/loginhooks/E10shell\n"
"$ sudo pbuilder update --hookdir ~/loginhooks/E10shell"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:820
+#: pbuilder-doc.xml:813
msgid "It is also possible to add"
-msgstr ""
+msgstr "$B$^$?JL$NJ}K!$H$7$F$O(B"
# type: Content of: <book><chapter><sect1><para><option>
-#: pbuilder-doc.xml:820
+#: pbuilder-doc.xml:813
msgid "--save-after-exec"
msgstr "--save-after-exec"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:821
+#: pbuilder-doc.xml:814
msgid "and/or"
msgstr "$B$b$7$/$O(B"
# type: Content of: <book><chapter><sect1><para><option>
-#: pbuilder-doc.xml:821
+#: pbuilder-doc.xml:814
msgid "--save-after-login"
msgstr "--save-after-login"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:821
+#: pbuilder-doc.xml:814
msgid ""
"options to the <command>pbuilder login</command> session to accomplish the "
"goal. It is possible to add the"
@@ -1450,38 +1465,38 @@ msgstr ""
"$B at .$9$k$3$H$,$G$-$^$9!#(B"
# type: Content of: <book><chapter><sect1><para><option>
-#: pbuilder-doc.xml:824
+#: pbuilder-doc.xml:817
msgid "--uml-login-nocow"
msgstr "--uml-login-nocow"
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:824
+#: pbuilder-doc.xml:817
msgid "option to <command>pbuilder-user-mode-linux"
msgstr "$B%*%W%7%g%s$r(B <command>pbuilder-user-mode-linux"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:825
+#: pbuilder-doc.xml:818
msgid "</command> session as well."
msgstr "</command> $B%;%C%7%g%s$KDI2C$9$k$3$H$b2DG=$G$9!#(B"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:830
+#: pbuilder-doc.xml:823
msgid "Setting BUILDRESULTUID for sudo sessions"
msgstr "BUILDRESULTUID $B$r(B sudo $B$N%;%C%7%g%s$KDI2C$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:832
+#: pbuilder-doc.xml:825
msgid "It is possible to set"
msgstr "pbuilderrc $B$G(B"
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:833
+#: pbuilder-doc.xml:826
#, no-wrap
msgid "BUILDRESULTUID=$SUDO_UID"
msgstr "BUILDRESULTUID=$SUDO_UID"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:833
+#: pbuilder-doc.xml:826
msgid ""
"in pbuilderrc to set the proper BUILDRESULTUID when using <command>sudo</"
"command>."
@@ -1490,12 +1505,12 @@ msgstr ""
"$B$k$3$H$,2DG=$G$9!#(B"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:838
+#: pbuilder-doc.xml:831
msgid "Notes on usage of $TMPDIR"
msgstr "$TMPDIR$B$N;H$$J}$K$D$$$F(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:840
+#: pbuilder-doc.xml:833
msgid ""
"If you are setting $TMPDIR to an unusual value, of other than <filename>/"
"tmp</filename>, you will find that some errors may occur inside the chroot, "
@@ -1503,39 +1518,39 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:844
+#: pbuilder-doc.xml:837
msgid ""
"There are two options, you may install a hook to create that directory, or "
"set"
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:846
+#: pbuilder-doc.xml:839
#, no-wrap
msgid "export TMPDIR=/tmp"
msgstr "export TMPDIR=/tmp"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:847
+#: pbuilder-doc.xml:840
msgid "in pbuilderrc. Take your pick."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:850
+#: pbuilder-doc.xml:843
msgid ""
"An example script is provided as <filename>examples/D10tmp</filename> with "
"<command>pbuilder</command>."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:855
+#: pbuilder-doc.xml:848
msgid ""
"Creating a shortcut for running <command>pbuilder</command> with a specific "
"distribution"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:857
+#: pbuilder-doc.xml:850
msgid ""
"When working with multiple chroots, it would be nice to work with scripts "
"that reduce the amount of typing. An example script <filename>pbuilder-"
@@ -1545,31 +1560,31 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:866
+#: pbuilder-doc.xml:859
msgid ""
"Using environmental variables for running <command>pbuilder</command> for "
"specific distribution"
msgstr ""
# type: Content of: <book><chapter><sect1><para><footnote>
-#: pbuilder-doc.xml:869
+#: pbuilder-doc.xml:862
msgid "This section<footnote>"
msgstr ""
# type: Content of: <book><chapter><sect1><para><footnote><para>
-#: pbuilder-doc.xml:870
+#: pbuilder-doc.xml:863
msgid "This part of the documentation contributed by Andres Mejia"
msgstr ""
# type: Content of: <book><chapter><sect1><para><footnote><para>
-#: pbuilder-doc.xml:872
+#: pbuilder-doc.xml:865
msgid ""
"This example was taken from a wiki (<ulink url=\"https://wiki.ubuntu.com/"
"PbuilderHowto\">https://wiki.ubuntu.com/PbuilderHowto</ulink>)."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:875
+#: pbuilder-doc.xml:868
msgid ""
"</footnote> describes briefly a way to setup and use multiple pbuilder "
"setups by creating a pbuilderrc configuration in your home path (<filename>"
@@ -1578,24 +1593,25 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:880
+#: pbuilder-doc.xml:873
msgid "First, setup <filename>$HOME/.pbuilderrc</filename> to look like:"
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:883
+#: pbuilder-doc.xml:875
#, no-wrap
msgid ""
+"\n"
"if [ -n \"${DIST}\" ]; then\n"
" BASETGZ=\"`dirname $BASETGZ`/$DIST-base.tgz\"\n"
" DISTRIBUTION=\"$DIST\"\n"
" BUILDRESULT=\"/var/cache/pbuilder/$DIST/result/\"\n"
" APTCACHE=\"/var/cache/pbuilder/$DIST/aptcache/\"\n"
-"fi"
+"fi\n"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:890
+#: pbuilder-doc.xml:883
msgid ""
"Then, whenever you wish to use pbuilder for a particular distro, assign a "
"value to \"DIST\" that is one of the distros available for Debian or any "
@@ -1604,14 +1620,15 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:896
+#: pbuilder-doc.xml:889
msgid "Here's some examples on running pbuilder or pdebuild:"
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:899
+#: pbuilder-doc.xml:891
#, no-wrap
msgid ""
+"\n"
"DIST=gutsy sudo pbuilder create\n"
"\n"
"DIST=sid sudo pbuilder create --mirror http://http.us.debian.org/debian\n"
@@ -1626,58 +1643,63 @@ msgid ""
"http://http.us.debian.org/debian \\\n"
"--othermirror \"deb http://http.us.debian.org/debian sid contrib non-free\"\n"
"\n"
-"DIST=gutsy pdebuild"
+"DIST=gutsy pdebuild\n"
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:917
+#: pbuilder-doc.xml:910
msgid "Using special apt sources lists, and local packages"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:919
+#: pbuilder-doc.xml:912
msgid ""
-"If you have some very specialised requirements on your apt setup inside "
+"If you have some very specialized requirements on your apt setup inside "
"<command>pbuilder</command>, it is possible to specify that through the "
"<command>"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:922
+#: pbuilder-doc.xml:915
msgid "--othermirror"
msgstr "--othermirror"
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:922
+#: pbuilder-doc.xml:915
msgid "</command> option. Try something like: <command>"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:925
+#: pbuilder-doc.xml:918
msgid ""
"--othermirror \"deb http://local/mirror stable main|deb-src http://local/"
"source/repository ./\""
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:928
+#: pbuilder-doc.xml:918
+msgid "</command>"
+msgstr "</command>"
+
+# type: Content of: <book><chapter><sect1><para><command>
+#: pbuilder-doc.xml:921
msgid ""
"To use the local file system instead of HTTP, it is necessary to do bind-"
"mounting. <command>"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:930
+#: pbuilder-doc.xml:923
msgid "--bindmounts"
msgstr "--bindmounts"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:930
+#: pbuilder-doc.xml:923
msgid "</command> is a command-line option useful for such cases."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:934
+#: pbuilder-doc.xml:927
msgid ""
"It might be convenient to use your built packages from inside the chroot. "
"It is possible to automate the task with the following configuration. "
@@ -1685,26 +1707,28 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:939
+#: pbuilder-doc.xml:932
#, no-wrap
msgid "BINDMOUNTS=\"/var/cache/pbuilder/result\""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:943
+#: pbuilder-doc.xml:935
msgid "Then, add the following hook"
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:947
+#: pbuilder-doc.xml:938
#, no-wrap
msgid ""
+"\n"
"# cat /var/cache/pbuilder/hooks/D70results\n"
"#!/bin/sh\n"
"cd /var/cache/pbuilder/result/\n"
"/usr/bin/dpkg-scanpackages . /dev/null > /var/cache/pbuilder/result/Packages\n"
"/usr/bin/apt-get update"
msgstr ""
+"\n"
"# cat /var/cache/pbuilder/hooks/D70results\n"
"#!/bin/sh\n"
"cd /var/cache/pbuilder/result/\n"
@@ -1712,33 +1736,40 @@ msgstr ""
"/usr/bin/apt-get update"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:955
+#: pbuilder-doc.xml:946
msgid ""
"This way, you can use <filename>deb file:/var/cache/pbuilder/result</"
"filename>"
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:959
+#: pbuilder-doc.xml:950
msgid ""
"How to get pbuilder to run apt-get update before trying to satisfy build-"
"dependency"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:961
+#: pbuilder-doc.xml:952
msgid ""
"You can use hook scripts for this. D scripts are run before satisfying "
"build-dependency."
msgstr ""
+# type: Content of: <book><chapter><sect1><para>
+#: pbuilder-doc.xml:956
+msgid ""
+"<ulink url=\"http://lists.debian.org/debian-devel/2006/05/msg00550.html\"> "
+"This snippet comes from Ondrej Sury. </ulink>"
+msgstr ""
+
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:971
+#: pbuilder-doc.xml:962
msgid "Different bash prompts inside pbuilder login"
msgstr "pbuilder login $B$G(B bash $B$N%W%m%s%W%H$rJQ99$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:973
+#: pbuilder-doc.xml:964
msgid ""
"To make distinguishing bash prompts inside <command>pbuilder</command> "
"easier, it is possible to set environment variables such as PS1 inside "
@@ -1746,7 +1777,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para><footnote>
-#: pbuilder-doc.xml:979
+#: pbuilder-doc.xml:970
msgid ""
"With versions of bash more recent than 2.05b-2-15, the value of the "
"debian_chroot variable, if set, is included in the value of PS1 (the Bash "
@@ -1754,44 +1785,48 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para><footnote><para>
-#: pbuilder-doc.xml:984
+#: pbuilder-doc.xml:975
msgid "Versions of bash from and before Debian 3.0"
msgstr "Debian 3.0 $B0JA0$N(Bbash "
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:985
+#: pbuilder-doc.xml:976
msgid "</footnote> setting PS1 in pbuilderrc worked."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:988
+#: pbuilder-doc.xml:979
msgid "example of debian_chroot"
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:990
+#: pbuilder-doc.xml:980
#, no-wrap
-msgid "export debian_chroot=\"pbuild$$\""
-msgstr "export debian_chroot=\"pbuild$$\""
+msgid ""
+"\n"
+"\texport debian_chroot=\"pbuild$$\""
+msgstr "\n export debian_chroot=\"pbuild$$\""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:992
+#: pbuilder-doc.xml:982
msgid "example of PS1"
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:994
+#: pbuilder-doc.xml:983
#, no-wrap
-msgid "export PS1=\"pbuild chroot 32165 # \""
+msgid ""
+"\n"
+"\texport PS1=\"pbuild chroot 32165 # \""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:998
+#: pbuilder-doc.xml:987
msgid "Creating a chroot reminder"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1000
+#: pbuilder-doc.xml:989
msgid ""
"Bash prompts will help you remember that you are inside a chroot. There are "
"other cases where you may want other signs of being inside a chroot. Check "
@@ -1800,12 +1835,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1009
+#: pbuilder-doc.xml:998
msgid "Using /var/cache/apt/archives for the package cache"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1011
+#: pbuilder-doc.xml:1000
msgid ""
"For the help of low-bandwidth systems, it is possible to use <filename>/var/"
"cache/apt/archives</filename> as the package cache. Just specify it instead "
@@ -1813,7 +1848,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1017
+#: pbuilder-doc.xml:1006
msgid ""
"It is however not possible to do so currently with the user-mode-linux "
"version of <command>pbuilder</command>, because <filename>/var/cache/apt/"
@@ -1821,7 +1856,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1023
+#: pbuilder-doc.xml:1012
msgid ""
"Use of dedicated tools such as apt-proxy is recommended, since caching of "
"packages would benefit the system outside the scope of <command>pbuilder</"
@@ -1829,35 +1864,37 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1029
+#: pbuilder-doc.xml:1018
msgid "pbuilder back ported to stable Debian releases"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1031
-msgid "Currently stable back port of pbuilder is avialable at backports.org."
+#: pbuilder-doc.xml:1020
+msgid "Currently stable back port of pbuilder is available at backports.org."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1035
+#: pbuilder-doc.xml:1024
msgid "Warning about LOGNAME not being defined"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1037
+#: pbuilder-doc.xml:1026
msgid ""
"You might see a lot of warning messages when running <command>pbuilder</"
"command>."
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:1041
+#: pbuilder-doc.xml:1029
#, no-wrap
-msgid "dpkg-genchanges: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)"
+msgid ""
+"\n"
+"\tdpkg-genchanges: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1045
+#: pbuilder-doc.xml:1033
msgid ""
"It is currently safe to ignore this warning message. Please report back if "
"you find any problem with having LOGNAME unset. Setting LOGNAME caused a "
@@ -1867,12 +1904,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1054
+#: pbuilder-doc.xml:1042
msgid "Cannot Build-conflict against an essential package"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1056
+#: pbuilder-doc.xml:1044
msgid ""
"<command>pbuilder</command> does not currently allow Build-Conflicts against "
"essential packages. It should be obvious that essential packages should not "
@@ -1881,12 +1918,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1065
+#: pbuilder-doc.xml:1053
msgid "Avoiding the \"ln: Invalid cross-device link\" message"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1067
+#: pbuilder-doc.xml:1055
msgid ""
"By default, <command>pbuilder</command> uses hard links to manage the "
"<command>pbuilder</command> package cache. It is not possible to make hard "
@@ -1895,23 +1932,26 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:1071 pbuilder-doc.xml:1228
+#: pbuilder-doc.xml:1059 pbuilder-doc.xml:1215
#, no-wrap
msgid "APTCACHEHARDLINK=no"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1071
-msgid "in your pbuilderrc file."
+#: pbuilder-doc.xml:1059
+msgid ""
+"in your pbuilderrc file. Note that packages in <command>APTCACHE</command> "
+"will be copied into chroot local cache, so plan for enough space on "
+"<command>BUILDPLACE</command> device."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1076
+#: pbuilder-doc.xml:1067
msgid "Using fakechroot"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1078
+#: pbuilder-doc.xml:1069
msgid ""
"It is possible to use <command>fakechroot</command> instead of being root to "
"run <command>pbuilder</command>; however, several things make this "
@@ -1921,38 +1961,38 @@ msgid ""
"function, or override the overriding provided by <command>fakechroot</"
"command>. One example is <command>ldd</command>. Inside "
"<command>fakechroot</command>, <command>ldd</command> will check the library "
-"dependency outside of the chroot, which is not the expected behaviour."
+"dependency outside of the chroot, which is not the expected behavior."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1092
+#: pbuilder-doc.xml:1083
msgid "To work around the problem, debootstrap has a"
msgstr ""
# type: Content of: <book><chapter><sect1><para><option>
-#: pbuilder-doc.xml:1093
+#: pbuilder-doc.xml:1084
msgid "--variant fakechroot"
msgstr "--variant fakechroot"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1093
+#: pbuilder-doc.xml:1084
msgid "option. Use that, so that ldd and ldconfig are overridden."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1097
+#: pbuilder-doc.xml:1088
msgid ""
"Make sure you have set your LD_PRELOAD path correctly, as described in the "
"fakechroot manpage."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1102
+#: pbuilder-doc.xml:1093
msgid "Using debconf inside pbuilder sessions"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1104
+#: pbuilder-doc.xml:1095
msgid ""
"To use debconf inside <command>pbuilder</command>, setting DEBIAN_FRONTEND "
"to <quote>readline</quote> in <filename>pbuilderrc</filename> should work. "
@@ -1961,25 +2001,27 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1111
+#: pbuilder-doc.xml:1102
msgid "nodev mount options hinder pbuilder activity"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1113
+#: pbuilder-doc.xml:1104
msgid ""
"If you see messages such as this when building a chroot, you are mounting "
"the file system with the nodev option."
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:1117
+#: pbuilder-doc.xml:1107
#, no-wrap
-msgid "/var/lib/dpkg/info/base-files.postinst: /dev/null: Permission denied"
+msgid ""
+"\n"
+"\t/var/lib/dpkg/info/base-files.postinst: /dev/null: Permission denied"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1120
+#: pbuilder-doc.xml:1110
msgid ""
"You will also have problems if you mount the file system with the noexec "
"option, or nosuid. Make sure you do not have these flags set when mounting "
@@ -1987,24 +2029,24 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1126
+#: pbuilder-doc.xml:1116
msgid "This is not a problem when using <command>user-mode-linux</command>."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1129
+#: pbuilder-doc.xml:1119
msgid ""
"See <ulink url=\"http://bugs.debian.org/316135\"> 316135 </ulink> for "
"example."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1135
+#: pbuilder-doc.xml:1125
msgid "pbuilder is slow"
msgstr "pbuilder $B$,CY$$(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1137
+#: pbuilder-doc.xml:1127
msgid ""
"<command>pbuilder</command> is often slow. The slowest part of "
"<command>pbuilder</command> is extracting the tar.gz every time "
@@ -2015,7 +2057,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1146
+#: pbuilder-doc.xml:1136
msgid ""
"<command>pbuilder-user-mode-linux</command> is slower in executing the "
"actual build system, due to the usual <command>user-mode-linux</command> "
@@ -2023,50 +2065,61 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1152
+#: pbuilder-doc.xml:1142
msgid ""
"<command>pbuilder</command> with cowdancer is also an alternative that "
"improves speed of pbuilder startup."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1157
+#: pbuilder-doc.xml:1147
msgid "Using pdebuild to sponsor package"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:1159
+#: pbuilder-doc.xml:1149
msgid ""
"To sign a package marking for sponsorship, it is possible to use<command>"
msgstr ""
# type: Content of: <book><chapter><sect1><screen><command><option>
-#: pbuilder-doc.xml:1160 pbuilder-doc.xml:1165
+#: pbuilder-doc.xml:1150 pbuilder-doc.xml:1155
msgid "--auto-debsign"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:1160
+#: pbuilder-doc.xml:1150
msgid "</command> and <command>"
msgstr ""
# type: Content of: <book><chapter><sect1><screen><command><option>
-#: pbuilder-doc.xml:1161 pbuilder-doc.xml:1165
+#: pbuilder-doc.xml:1151 pbuilder-doc.xml:1155
msgid "--debsign-k"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1161
+#: pbuilder-doc.xml:1151
msgid "</command> options of <command>pdebuild</command>."
msgstr ""
+# type: Content of: <book><chapter><sect1><para><command>
+#: pbuilder-doc.xml:1155
+msgid "<command>pdebuild"
+msgstr "<command>pdebuild"
+
+# type: Content of: <book><chapter><sect1><screen>
+#: pbuilder-doc.xml:1155
+#, no-wrap
+msgid "<parameter>XXXXXXXX</parameter></command>"
+msgstr ""
+
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1169
+#: pbuilder-doc.xml:1158
msgid "Why is there a source.changes file in ../?"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1171
+#: pbuilder-doc.xml:1160
msgid ""
"When running <command>pdebuild</command>, <command>pbuilder</command> will "
"run dpkg-buildpackage to create a Debian source package to pass it on to "
@@ -2076,17 +2129,17 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1177
-msgid "This behaviour is different when running through"
+#: pbuilder-doc.xml:1166
+msgid "This behavior is different when running through"
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1181
+#: pbuilder-doc.xml:1170
msgid "amd64 and i386-mode"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:1183
+#: pbuilder-doc.xml:1172
msgid ""
"amd64 architectures are capable of running binaries in i386 mode. It is "
"possible to use <command>pbuilder</command> to run packages, using "
@@ -2094,51 +2147,62 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:1186
+#: pbuilder-doc.xml:1175
msgid "--arch"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1186
+#: pbuilder-doc.xml:1175
msgid ""
"</command> option. Specifically, a command-line option like the following "
"will work."
msgstr ""
+# type: Content of: <book><chapter><sect1><para><screen>
+#: pbuilder-doc.xml:1180
+#, no-wrap
+msgid ""
+"\n"
+"<command>pbuilder create --distribution sid --debootstrapopts --arch --debootstrapopts i386 \\\n"
+" --basetgz /var/cache/pbuilder/base-i386.tgz --mirror http://ftp.jp.debian.org/debian</command>\n"
+"<command>linux32 pbuilder build --basetgz /var/cache/pbuilder/base-i386.tgz</command>"
+msgstr ""
+
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1199
+#: pbuilder-doc.xml:1187
msgid "How to use ccache"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1201
+#: pbuilder-doc.xml:1189
msgid ""
"To use <command>ccache</command> with <command>pbuilder</command>, use the "
-"following for configuration. Note that the directory used for CCACHE_DIR "
-"needs to exist, and be writable by user within <command>chroot</command>. "
-"The default user within <command>chroot</command> is"
+"following configuration. Note that the directory used for CCACHE_DIR needs "
+"to exist, and be writable by user within <command>chroot</command>. The "
+"default user within <command>chroot</command> is"
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:1205
+#: pbuilder-doc.xml:1193
#, no-wrap
msgid "uid=1234"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1205 pbuilder-doc.xml:1228
+#: pbuilder-doc.xml:1193 pbuilder-doc.xml:1215
msgid "."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1208
+#: pbuilder-doc.xml:1196
msgid "Example is provided as pbuilderrc.ccache."
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:1211
+#: pbuilder-doc.xml:1198
#, no-wrap
msgid ""
+"\n"
"export CCACHE_DIR=\"/var/cache/pbuilder/ccache\"\n"
"export PATH=\"/usr/lib/ccache:${PATH}\"\n"
"\n"
@@ -2146,13 +2210,20 @@ msgid ""
"BINDMOUNTS=\"${CCACHE_DIR}\""
msgstr ""
+# type: Content of: <book><chapter><sect1><para>
+#: pbuilder-doc.xml:1205
+msgid ""
+"<ulink url=\"http://web.glandium.org/blog/?p=55\">This entry created thanks "
+"to a blog posting. </ulink>"
+msgstr ""
+
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1223
+#: pbuilder-doc.xml:1210
msgid "Using tmpfs for buildplace"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1225
+#: pbuilder-doc.xml:1212
msgid ""
"To improve speed of operation, it is possible to use tmpfs for pbuilder "
"build location. Mount tmpfs to <filename>/var/cache/pbuilder/build</"
@@ -2160,47 +2231,56 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:1232
+#: pbuilder-doc.xml:1219
msgid "Using svn-buildpackage together with pbuilder"
msgstr "svn-buildpackage $B$r(B pbuilder $B$GMxMQ$9$k(B"
# type: Content of: <book><chapter><sect1><para><footnote>
-#: pbuilder-doc.xml:1234
+#: pbuilder-doc.xml:1221
msgid ""
"pdebuild command can be used with svn-buildpackage --svn-builder command-"
"line option. <footnote>"
msgstr ""
+# type: Content of: <book><chapter><sect1><para><footnote><para>
+#: pbuilder-doc.xml:1224
+msgid ""
+"<ulink url=\"http://upsilon.cc/~zack/blog/posts/2007/09/svn-cowbuilder/\"> "
+"Zack has posted an example on his blog. </ulink>"
+msgstr ""
+
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:1243
+#: pbuilder-doc.xml:1229
#, no-wrap
-msgid "alias svn-cowbuilder=\"svn-buildpackage --svn-builder='pdebuild --pbuilder cowbuilder\""
+msgid ""
+"\n"
+"alias svn-cowbuilder=\"svn-buildpackage --svn-builder='pdebuild --pbuilder cowbuilder\""
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:1251
+#: pbuilder-doc.xml:1237
msgid "Troubleshooting and development"
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1253
+#: pbuilder-doc.xml:1239
msgid "Reporting bugs"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command>
-#: pbuilder-doc.xml:1255
+#: pbuilder-doc.xml:1241
msgid ""
"To report bugs, it would be important to have a log of what's going wrong. "
"Most of the time, adding a <command>"
msgstr ""
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:1257
+#: pbuilder-doc.xml:1243
msgid "--debug"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1257
+#: pbuilder-doc.xml:1243
msgid ""
"</command> option and re-running the session should do the trick. Please "
"send the log of such session along with your problem to ease the debugging "
@@ -2208,12 +2288,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1264
+#: pbuilder-doc.xml:1250
msgid "Mailing list"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1266
+#: pbuilder-doc.xml:1252
msgid ""
"There is a mailing list for <command>pbuilder</command> on alioth (pbuilder-"
"maint at lists.alioth.debian.org). You can subscribe through the alioth web "
@@ -2222,12 +2302,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1274
+#: pbuilder-doc.xml:1260
msgid "IRC Channel"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1276
+#: pbuilder-doc.xml:1262
msgid ""
"For coordination and communication, IRC channel #pbuilder on irc.oftc.net is "
"used. Please log your intent there when you are going to start doing some "
@@ -2235,19 +2315,19 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1283
+#: pbuilder-doc.xml:1269
msgid "Information for pbuilder developers"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1285
+#: pbuilder-doc.xml:1271
msgid ""
"This section tries to document current development practices and how things "
"generally operate in development."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1289
+#: pbuilder-doc.xml:1275
msgid ""
"<command>pbuilder</command> is co-maintained with resources provided by "
"Alioth. There is an Alioth project page at <ulink url=\"http://alioth."
@@ -2259,16 +2339,17 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><screen>
-#: pbuilder-doc.xml:1303
+#: pbuilder-doc.xml:1288
#, no-wrap
msgid ""
+"\n"
"git-clone git://git.debian.org/git/pbuilder/pbuilder.git\n"
"git-clone http://git.debian.org/git/pbuilder/pbuilder.git\n"
"git-clone ssh://git.debian.org/git/pbuilder/pbuilder.git"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1308
+#: pbuilder-doc.xml:1293
msgid ""
"Test-suites are available in <filename>./testsuite/</filename> directory. "
"Changes are expected not to break the test-suites. <filename>./run-test.sh</"
@@ -2281,78 +2362,128 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><table><title>
-#: pbuilder-doc.xml:1317
+#: pbuilder-doc.xml:1302
msgid "Directory structure of the testsuite"
-msgstr ""
+msgstr "$B%F%9%H%9%$!<%H$N%G%#%l%/%H%j9=B$(B"
# type: Content of: <book><chapter><sect1><table><tgroup><thead><row><entry>
-#: pbuilder-doc.xml:1323 pbuilder-doc.xml:1568 pbuilder-doc.xml:1632
+#: pbuilder-doc.xml:1308 pbuilder-doc.xml:1548 pbuilder-doc.xml:1612
msgid "Directory"
-msgstr ""
+msgstr "$B%G%#%l%/%H%j(B"
# type: Content of: <book><chapter><sect1><table><tgroup><thead><row><entry>
-#: pbuilder-doc.xml:1324 pbuilder-doc.xml:1569 pbuilder-doc.xml:1633
+#: pbuilder-doc.xml:1309 pbuilder-doc.xml:1549 pbuilder-doc.xml:1613
msgid "Meaning"
-msgstr ""
+msgstr "$B0UL#(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1330
+#: pbuilder-doc.xml:1314
+msgid "<filename>./testsuite/</filename>"
+msgstr "<filename>./testsuite/</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1315
msgid "Directory for testsuite"
-msgstr ""
+msgstr "$B%F%9%H%9%$!<%H$X$N%G%#%l%/%H%j(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1334
+#: pbuilder-doc.xml:1318
+msgid "<filename>./testsuite/run-test.sh</filename>"
+msgstr "<filename>./testsuite/run-test.sh</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1319
msgid ""
"Daily regression test to test against Debian Archive changes breaking "
"pbuilder."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1338
+#: pbuilder-doc.xml:1322
+msgid "<filename>./testsuite/run-test.log</filename>"
+msgstr "<filename>./testsuite/run-test.log</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1323
msgid "A summary of testsuite"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1342
+#: pbuilder-doc.xml:1326
+msgid "<filename>./testsuite/normal/</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1327
msgid "Directory for testsuite results of running pbuilder with debootstrap"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1346
+#: pbuilder-doc.xml:1330
+msgid "<filename>./testsuite/cdebootstrap/</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1331
msgid "Directory for testsuite results of running pbuilder with cdebootstrap"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1350
+#: pbuilder-doc.xml:1334
+msgid "<filename>./testsuite/run-regression.sh</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1335
msgid ""
"Regression testsuite, ran every time change is made to pbuilder to make sure "
"there is no regression."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1354
+#: pbuilder-doc.xml:1338
+msgid "<filename>./testsuite/run-regression.log</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1339
msgid "Summary of test result"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1358
+#: pbuilder-doc.xml:1342
+msgid "<filename>./testsuite/regression/BugID-*.sh</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1343
msgid "Regression tests, exit 0 for success, exit 1 for failure"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1362
-msgid "Files used for the regression testsuite."
+#: pbuilder-doc.xml:1346
+msgid "<filename>./testsuite/regression/BugID-*</filename>"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1366
+#: pbuilder-doc.xml:1347
+msgid "Files used for the regression testsuite."
+msgstr "$B2s5"%F%9%H%9%$!<%H$KMxMQ$5$l$k%U%!%$%k(B"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1350
+msgid "<filename>./testsuite/regression/log/BugID-*.sh.log</filename>"
+msgstr "<filename>./testsuite/regression/log/BugID-*.sh.log</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1351
msgid ""
"Output of the regression test, output from the script is redirected by run-"
"regression.sh"
-msgstr ""
+msgstr "$B2s5"%F%9%H$N=PNO!"(B run-regression.sh $B$K$h$j%9%/%j%W%H$N=PNO$,%j%@%$%l%/%H$5$l$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1372
+#: pbuilder-doc.xml:1357
msgid ""
"When making changes, changes should be documented in the Git commit log. "
"git-dch will generate debian/changelog from the commit log. Make the first "
@@ -2361,7 +2492,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1378
+#: pbuilder-doc.xml:1363
msgid ""
"A TODO file is available in <filename>debian/TODO</filename>. It's mostly "
"not well-maintained, but hopefully it will be more up-to-date when people "
@@ -2369,7 +2500,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1384
+#: pbuilder-doc.xml:1369
msgid ""
"When releasing a new version of <command>pbuilder</command>, the version is "
"tagged with the git tag X.XXX (version number). This is done with "
@@ -2377,17 +2508,17 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:1392
+#: pbuilder-doc.xml:1377
msgid "Other uses of pbuilder"
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1394
+#: pbuilder-doc.xml:1379
msgid "Using pbuilder for small experiments"
-msgstr ""
+msgstr "pbuilder $B$r>.5,LO$J<B83$N$?$a$K3hMQ$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1396
+#: pbuilder-doc.xml:1381
msgid ""
"There are cases when some small experimenting is required, and you do not "
"want to damage the main system, like when installing experimental library "
@@ -2396,7 +2527,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1403
+#: pbuilder-doc.xml:1388
msgid ""
"<command>pbuilder login </command> is a debugging feature for "
"<command>pbuilder</command> itself, but it also allows users to have a "
@@ -2404,19 +2535,19 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1407
+#: pbuilder-doc.xml:1392
msgid ""
"Note that the chroot is cleaned after logging out of the shell, and mounting "
"file systems inside it is considered harmful."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1412
+#: pbuilder-doc.xml:1397
msgid "Running little programs inside the chroot"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1414
+#: pbuilder-doc.xml:1399
msgid ""
"To facilitate using <command>pbuilder</command> for other uses, "
"<command>pbuilder execute</command> is available. <command>pbuilder execute "
@@ -2425,31 +2556,31 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1421
+#: pbuilder-doc.xml:1406
msgid ""
"The script can be useful for sequences of operations such as installing ssh "
"and adding a new user inside the chroot."
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:1427
+#: pbuilder-doc.xml:1412
msgid "Experimental or wish-list features of pbuilder"
-msgstr ""
+msgstr "$B<B83E*$J(B pbuilder $B$N(B wish-list $BE*$J5!G=(B"
# type: Content of: <book><chapter><para>
-#: pbuilder-doc.xml:1429
+#: pbuilder-doc.xml:1414
msgid ""
"There are some advanced features, above that of the basic feature of "
"<command>pbuilder</command>, for some specific purposes."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1433
+#: pbuilder-doc.xml:1418
msgid "Using LVM"
-msgstr ""
+msgstr "LVM$B$N3hMQ(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1435
+#: pbuilder-doc.xml:1420
msgid ""
"LVM2 has a useful snapshot function that features Copy-on-write images. "
"That could be used for <command>pbuilder</command> just as it can be used "
@@ -2460,12 +2591,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1444
+#: pbuilder-doc.xml:1429
msgid "Using cowdancer"
-msgstr ""
+msgstr "cowdancer $B$N3hMQ(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1446
+#: pbuilder-doc.xml:1431
msgid ""
"<command>cowdancer</command> allows copy-on-write semantics on file system "
"using hard links and hard-link-breaking-on-write tricks. <command>pbuilder</"
@@ -2476,56 +2607,63 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1457
+#: pbuilder-doc.xml:1442
msgid "Example command-lines for cowbuilder look like the following."
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:1461
+#: pbuilder-doc.xml:1445
#, no-wrap
msgid ""
+"\n"
"# cowbuilder --create --distribution sid\n"
"# cowbuilder --update --distribution sid\n"
"# cowbuilder --build XXX.dsc"
msgstr ""
+"\n"
+"# cowbuilder --create --distribution sid\n"
+"# cowbuilder --update --distribution sid\n"
+"# cowbuilder --build XXX.dsc"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1467
+#: pbuilder-doc.xml:1451
msgid ""
"It is also possible to use cowdancer with pdebuild command. Specify with "
"command-line option"
msgstr ""
# type: Content of: <book><chapter><sect1><para><option>
-#: pbuilder-doc.xml:1468
+#: pbuilder-doc.xml:1452
msgid "--pbuilder"
-msgstr ""
+msgstr "--pbuilder"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1469
+#: pbuilder-doc.xml:1453
msgid "or set it in PDEBUILD_PBUILDER configuration option."
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:1473
+#: pbuilder-doc.xml:1456
#, no-wrap
-msgid "$ pdebuild --pbuilder cowbuilder"
-msgstr ""
+msgid ""
+"\n"
+"$ pdebuild --pbuilder cowbuilder"
+msgstr "\n$ pdebuild --pbuilder cowbuilder"
# type: Content of: <book><chapter><sect1><sect2><title>
-#: pbuilder-doc.xml:1477
+#: pbuilder-doc.xml:1460
msgid "Using cowdancer for sarge"
-msgstr ""
+msgstr "sarge $B8~$1$K(B cowdancer $B$rMxMQ$9$k(B"
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1479
+#: pbuilder-doc.xml:1462
msgid ""
"This section is mostly obsolete now that etch is released, but left for "
"reference, and will be removed after lenny release."
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1484
+#: pbuilder-doc.xml:1467
msgid ""
"cowdancer was introduced after the release of Debian sarge; if you want to "
"build packages for sarge with cowbuilder, you will need to workaround its "
@@ -2533,7 +2671,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1489
+#: pbuilder-doc.xml:1472
msgid ""
"One way to workaround the problem is to set APTCONFDIR in pbuilderrc to "
"point to a directory with a list of sources for APT which has both sarge and "
@@ -2541,9 +2679,10 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para><screen>
-#: pbuilder-doc.xml:1495
+#: pbuilder-doc.xml:1477
#, no-wrap
msgid ""
+"\n"
"$ cat sources.list\n"
"# sarge-backports\n"
"deb http://www.backports.org/debian sarge-backports main\n"
@@ -2553,37 +2692,53 @@ msgid ""
"deb http://ftp.de.debian.org/debian sarge main\n"
"deb-src http://ftp.de.debian.org/debian sarge main"
msgstr ""
+"\n"
+"$ cat sources.list\n"
+"# sarge-backports\n"
+"deb http://www.backports.org/debian sarge-backports main\n"
+"deb-src http://www.backports.org/debian sarge-backports main\n"
+"\n"
+"# sarge\n"
+"deb http://ftp.de.debian.org/debian sarge main\n"
+"deb-src http://ftp.de.debian.org/debian sarge main"
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1506
+#: pbuilder-doc.xml:1488
msgid ""
"It is recommended to \"Pin\" the cowdancer package appropriately in this "
"case, via the APT preferences mechanism."
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para><screen>
-#: pbuilder-doc.xml:1511
+#: pbuilder-doc.xml:1492
#, no-wrap
msgid ""
+"\n"
"$ cat preferences\n"
"Explanation: use cowdancer from backports\n"
"Package: cowdancer\n"
"Pin: release a=sarge-backports\n"
"Pin-Priority: 950"
msgstr ""
+"\n"
+"$ cat preferences\n"
+"Explanation: use cowdancer from backports\n"
+"Package: cowdancer\n"
+"Pin: release a=sarge-backports\n"
+"Pin-Priority: 950"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1521
+#: pbuilder-doc.xml:1502
msgid "Using pbuilder without tar.gz"
msgstr "tar.gz $B$rMxMQ$7$J$$$G(B pbuilder $B$rMxMQ$9$k(B"
# type: Content of: <book><chapter><sect1><para><command><option>
-#: pbuilder-doc.xml:1523
+#: pbuilder-doc.xml:1504
msgid "--no-targz"
msgstr "--no-targz"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1523
+#: pbuilder-doc.xml:1504
msgid ""
"</command> option of <command>pbuilder</command> will allow usage of "
"<command>pbuilder</command> in a different way from conventional usage. It "
@@ -2592,31 +2747,33 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1534
+#: pbuilder-doc.xml:1515
msgid ""
"It should be possible to create base chroot images for <command>dchroot</"
"command> with the following commands:"
msgstr ""
# type: Content of: <book><chapter><sect1><para><screen>
-#: pbuilder-doc.xml:1537
+#: pbuilder-doc.xml:1517
#, no-wrap
msgid ""
+"\n"
"# pbuilder create --distribution etch --no-targz --basetgz /chroot/etch\n"
"# pbuilder create --distribution lenny --no-targz --basetgz /chroot/lenny\n"
"# pbuilder create --distribution sid --no-targz --basetgz /chroot/sid"
msgstr ""
+"\n"
"# pbuilder create --distribution etch --no-targz --basetgz /chroot/etch\n"
"# pbuilder create --distribution lenny --no-targz --basetgz /chroot/lenny\n"
"# pbuilder create --distribution sid --no-targz --basetgz /chroot/sid"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1544
+#: pbuilder-doc.xml:1524
msgid "Using pbuilder in a vserver"
msgstr "pbuilder $B$r(B vserver $B$GMxMQ$9$k(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1546
+#: pbuilder-doc.xml:1526
msgid ""
"It is possible to use <command>pbuilder</command> in a vserver environment. "
"This requires either vserver-patches in version 2.1.1-rc14 or higher, or a "
@@ -2624,7 +2781,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1551
+#: pbuilder-doc.xml:1531
msgid ""
"To use <command>pbuilder</command> in a vserver, you need to set the "
"<command>secure_mount</command> <command>CAPS</command> in the "
@@ -2632,106 +2789,171 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:1558
+#: pbuilder-doc.xml:1538
msgid "Reference materials"
msgstr "$B;29MJ88%(B"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1560
+#: pbuilder-doc.xml:1540
msgid "Directory structure outside the chroot"
msgstr "chroot $B30It$N%G%#%l%/%H%j9=B$(B"
# type: Content of: <book><chapter><sect1><table><title>
-#: pbuilder-doc.xml:1562
+#: pbuilder-doc.xml:1542
msgid "Directory Structure outside the chroot"
msgstr "chroot $BFbIt$N%G%#%l%/%H%j9=B$(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1575
+#: pbuilder-doc.xml:1554
+msgid "<filename>/etc/pbuilderrc</filename>"
+msgstr "<filename>/etc/pbuilderrc</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1555
msgid "configuration file"
msgstr "$B at _Dj%U%!%$%k(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1579
+#: pbuilder-doc.xml:1558
+msgid "<filename>/usr/share/pbuilder/pbuilderrc</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1559
msgid "Default configuration"
msgstr "$B%G%U%)%k%H at _Dj(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1583
+#: pbuilder-doc.xml:1562
+msgid "<filename>/var/cache/pbuilder/base.tgz</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1563
msgid ""
"Default location pbuilder uses for base.tgz, the tar-ball containing a basic "
"Debian installation with only the build-essential packages."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1589
+#: pbuilder-doc.xml:1568
+msgid "<filename>/var/cache/pbuilder/build/PID/</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1569
msgid "Default location pbuilder uses for chroot"
msgstr "pbuilder $B$,%G%U%)%k%H$G(Bchroot $B$N$?$a$KMxMQ$9$k>l=j(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1593
+#: pbuilder-doc.xml:1572
+msgid "<filename>/var/cache/pbuilder/aptcache</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1573
msgid ""
"Default location <command>pbuilder</command> will use as apt cache, to store "
"deb packages required during <command>pbuilder</command> build."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1597
+#: pbuilder-doc.xml:1576
+msgid "<filename>/var/cache/pbuilder/result</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1577
msgid ""
"Default location <command>pbuilder</command> puts the deb files and other "
"files created after build"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1601
+#: pbuilder-doc.xml:1580
+msgid "<filename>/var/cache/pbuilder/pbuilder-umlresult</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1581
msgid ""
"Default location <command>pbuilder-user-mode-linux</command> puts the deb "
"files and other files created after build"
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1605
+#: pbuilder-doc.xml:1584
+msgid "<filename>/var/cache/pbuilder/pbuilder-mnt</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1585
msgid ""
"Default location <command>pbuilder-user-mode-linux</command> uses for "
"mounting the COW file system, for chrooting."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1609
+#: pbuilder-doc.xml:1588
+msgid "<filename>/tmp</filename>"
+msgstr "<filename>/tmp</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1589
msgid "<command>pbuilder-user-mode-linux</command> will mount tmpfs for work."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1613
+#: pbuilder-doc.xml:1592
+msgid "<filename>${HOME}/tmp/PID.cow</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1593
msgid ""
"<command>pbuilder-user-mode-linux</command> use this directory for location "
"of COW file system."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1617
+#: pbuilder-doc.xml:1596
+msgid "<filename>${HOME}/uml-image</filename>"
+msgstr ""
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1597
msgid ""
"<command>pbuilder-user-mode-linux</command> use this directory for user-mode-"
"linux full disk image."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1624
+#: pbuilder-doc.xml:1604
msgid "Directory structure inside the chroot"
msgstr "chroot $BFbIt$N%G%#%l%/%H%j9=B$(B"
# type: Content of: <book><chapter><sect1><table><title>
-#: pbuilder-doc.xml:1626
+#: pbuilder-doc.xml:1606
msgid "Directory Structure inside the chroot"
msgstr "chroot $BFbIt$N%G%#%l%/%H%j9=B$(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1640
+#: pbuilder-doc.xml:1618
+msgid "<filename>/etc/mtab</filename>"
+msgstr "<filename>/etc/mtab</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1620
msgid "symlink to <filename>/proc/mounts</filename>."
msgstr " <filename>/proc/mounts</filename>$B$X$N%7%s%\%j%C%/%j%s%/!#(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1645
+#: pbuilder-doc.xml:1624
+msgid "<filename>/tmp/buildd</filename>"
+msgstr "<filename>/tmp/buildd</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1625
msgid ""
"Default place used in <command>pbuilder</command> to place the Debian "
"package to be processed. <filename>/tmp/buildd/packagename-version/</"
@@ -2741,19 +2963,34 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1655
+#: pbuilder-doc.xml:1634
+msgid "<filename>/run</filename>"
+msgstr "<filename>/run</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1635
msgid ""
"The script passed as an argument to <command>pbuilder</command> execute is "
"passed on."
msgstr ""
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1663
+#: pbuilder-doc.xml:1641
+msgid "<filename>/tmp/hooks</filename>"
+msgstr "<filename>/tmp/hooks</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1643
msgid "The location of hooks."
msgstr "$B%U%C%/$N>l=j!#(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1669
+#: pbuilder-doc.xml:1647
+msgid "<filename>/var/cache/apt/archives</filename>"
+msgstr "<filename>/var/cache/apt/archives</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1649
msgid ""
"<command>pbuilder</command> copies the content of this directory to and from "
"the aptcache directory of outside chroot."
@@ -2762,7 +2999,12 @@ msgstr ""
"$B$7$F$-$?$j!"(Bchroot $B30It$N(B aptcache $B%G%#%l%/%H%j$X%3%T!<$7$?$j$7$^$9!#(B"
# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
-#: pbuilder-doc.xml:1675
+#: pbuilder-doc.xml:1654
+msgid "<filename>/tmp/XXXX</filename>"
+msgstr "<filename>/tmp/XXXX</filename>"
+
+# type: Content of: <book><chapter><sect1><table><tgroup><tbody><row><entry>
+#: pbuilder-doc.xml:1655
msgid ""
"<command>pbuilder-user-mode-linux</command> uses a script in <filename>/tmp</"
"filename> to bootstrap into user-mode-linux"
@@ -2771,24 +3013,24 @@ msgstr ""
"$B%/%j%W%H$rMxMQ$7$F(B user-mode-linux $B$K%V!<%H%9%H%i%C%W$7$^$9!#(B"
# type: Content of: <book><chapter><title>
-#: pbuilder-doc.xml:1685
+#: pbuilder-doc.xml:1665
msgid "Minor archaeological details"
msgstr "$B:3:Y$J2a5n$N7P0^$N>\:Y(B"
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1687
+#: pbuilder-doc.xml:1667
msgid "Documentation history"
msgstr "$B%^%K%e%"%k$NMzNr(B"
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1689
+#: pbuilder-doc.xml:1669
msgid ""
"This document was started on 28 Dec 2002 by Junichi Uekawa, trying to "
"document what is known about <command>pbuilder</command>."
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1694
+#: pbuilder-doc.xml:1674
msgid ""
"This documentation is available from the <command>pbuilder</command> source "
"tar-ball, and from the git repository of <command>pbuilder</command> (web-"
@@ -2802,19 +3044,19 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1705
+#: pbuilder-doc.xml:1685
msgid ""
"Documentation is written using DocBook XML, with emacs PSGML mode, and using "
"wysidocbookxml for live previewing."
msgstr ""
# type: Content of: <book><chapter><sect1><title>
-#: pbuilder-doc.xml:1711
+#: pbuilder-doc.xml:1691
msgid "Possibly inaccurate Background History of pbuilder"
msgstr ""
# type: Content of: <book><chapter><sect1><para>
-#: pbuilder-doc.xml:1713
+#: pbuilder-doc.xml:1693
msgid ""
"The following is a most possibly inaccurate account of how "
"<command>pbuilder</command> came to happen, and other attempts to make "
@@ -2824,12 +3066,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><title>
-#: pbuilder-doc.xml:1720
+#: pbuilder-doc.xml:1700
msgid "The Time Before pbuilder"
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1722
+#: pbuilder-doc.xml:1702
msgid ""
"There was once dbuild, which was a shell script to build Debian packages "
"from source. Lars Wirzenius wrote that script, and it was good, short, and "
@@ -2839,7 +3081,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1729
+#: pbuilder-doc.xml:1709
msgid ""
"debbuild was probably written by James Troup. I don't know it because I have "
"never seen the actual code, I could only find some references to it on the "
@@ -2847,7 +3089,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1734
+#: pbuilder-doc.xml:1714
msgid ""
"sbuild is a perl script to build Debian packages from source. It parses "
"Build-Depends, and performs other miscellaneous checks, and has a lot of "
@@ -2861,12 +3103,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><title>
-#: pbuilder-doc.xml:1748
+#: pbuilder-doc.xml:1728
msgid "Birth of pbuilder"
msgstr "pbuilder $B$NCB at 8(B"
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1750
+#: pbuilder-doc.xml:1730
msgid ""
"wanna-build (sbuild) was (at the time of year 2001) quite difficult to set "
"up, and it was never a Debian package. dbuild was something that predated "
@@ -2874,7 +3116,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1755
+#: pbuilder-doc.xml:1735
msgid ""
"Building packages from source using Build-Depends information within a "
"chroot sounded trivial; and <command>pbuilder</command> was born. It was "
@@ -2884,21 +3126,21 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1763
+#: pbuilder-doc.xml:1743
msgid ""
"Yes, and it took almost an year to get things somewhat right, and in the "
"middle of the process, Debian 3.0 was released. Yay. Debian 3.0 wasn't "
"completely buildable with <command>pbuilder</command>, but the amount of "
-"packages which are not buildable is steadily decreasing. (I hope)"
+"packages which are not buildable is steadily decreasing (I hope)."
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><title>
-#: pbuilder-doc.xml:1772
+#: pbuilder-doc.xml:1752
msgid "And the second year of its life"
-msgstr ""
+msgstr "$B$=$7$FFsG/L\$N?M at 8(B"
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1774
+#: pbuilder-doc.xml:1754
msgid ""
"Someone wanted <command>pbuilder</command> to not run as root, and as User-"
"mode-linux has become more useful as time passed, I've started experimenting "
@@ -2910,12 +3152,12 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><title>
-#: pbuilder-doc.xml:1787
+#: pbuilder-doc.xml:1767
msgid "Fifth year of pbuilder"
msgstr "pbuilder $B$N(B5$BG/L\(B"
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1789
+#: pbuilder-doc.xml:1769
msgid ""
"<command>pbuilder</command> is now widely adopted as a 'almost standard' "
"tool for testing packages, and building packages in a pristine environment. "
@@ -2925,7 +3167,7 @@ msgid ""
msgstr ""
# type: Content of: <book><chapter><sect1><sect2><para>
-#: pbuilder-doc.xml:1797
+#: pbuilder-doc.xml:1777
msgid ""
"<command>sbuild</command> is now a well-maintained Debian package within "
"Debian, and with <command>pbuilder</command> being such a slow monster, some "
--
1.5.6.3
--1yeeQ81UyVL57Vl7
Content-Type: text/x-diff; charset=iso-8859-1
Content-Disposition: attachment; filename="0002-UNRELEASED-snapshot-banner.patch"
Content-Transfer-Encoding: quoted-printable
=46rom 0978c835dd6f623a9a972a23e73ffd0a8940c9ac Mon Sep 17 00:00:00 2001
=46rom: =3D?utf-8?q?Lo=3DC3=3DAFc=3D20Minier?=3D <lool at dooz.org>
Date: Fri, 27 Jun 2008 19:11:51 +0200
Subject: [PATCH] UNRELEASED snapshot banner
---
debian/changelog | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/debian/changelog b/debian/changelog
index f7aa97f..56639e3 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+pbuilder (0.182) UNRELEASED; urgency=3Dlow
+
+ * UNRELEASED snapshot banner
+
+ -- Loic Minier <lool at dooz.org> Fri, 27 Jun 2008 19:11:12 +0200
+
pbuilder (0.181) unstable; urgency=3Dlow
=20
[ Esko Araj=E4rvi ]
--=20
1.5.6.3
--1yeeQ81UyVL57Vl7
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment; filename="0003-pbuilder-satisfydepends-gdebi-add-force-yes-to.patch"
More information about the Pbuilder-maint
mailing list