[Pcsclite-cvs-commit] r1872 - trunk/Drivers/ccid/readers

[Ludovic Rousseau]

Author: rousseau
Date: 2006-02-21 23:01:31 +0000 (Tue, 21 Feb 2006)
New Revision: 1872

Added:
   trunk/Drivers/ccid/readers/ActivCardV2.txt
   trunk/Drivers/ccid/readers/ActivCardV3.txt
Log:
add ActivCard v2 and v3 descriptions


Added: trunk/Drivers/ccid/readers/ActivCardV2.txt
===================================================================
--- trunk/Drivers/ccid/readers/ActivCardV2.txt	2006-02-21 22:50:04 UTC (rev 1871)
+++ trunk/Drivers/ccid/readers/ActivCardV2.txt	2006-02-21 23:01:31 UTC (rev 1872)
@@ -0,0 +1,53 @@
+ idVendor: 0x09C3
+  iManufacturer: ActivCard
+ idProduct: 0x0008
+  iProduct: ActivCard USB Reader V2
+ bcdDevice: 2.02 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 1
+  UNSUPPORTED SubClass
+ bInterfaceProtocol: 1
+  UNSUPPORTED InterfaceProtocol
+ iInterface: 4
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x01
+   5.0V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request
+  dwDataRate: 9600 bps
+  dwMaxDataRate: 115200 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request
+  dwMaxIFSD: 252
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100BA
+   ....02 Automatic parameter configuration based on ATR data
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 263 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

Added: trunk/Drivers/ccid/readers/ActivCardV3.txt
===================================================================
--- trunk/Drivers/ccid/readers/ActivCardV3.txt	2006-02-21 22:50:04 UTC (rev 1871)
+++ trunk/Drivers/ccid/readers/ActivCardV3.txt	2006-02-21 23:01:31 UTC (rev 1872)
@@ -0,0 +1,51 @@
+ idVendor: 0x09C3
+  iManufacturer: ActivCard
+ idProduct: 0x0013
+  iProduct: ActivCard USB Reader V3
+ bcdDevice: 5.18 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ iInterface: 4
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x01
+   5.0V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 12.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request
+  dwDataRate: 9600 bps
+  dwMaxDataRate: 307200 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request
+  dwMaxIFSD: 252
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100BA
+   ....02 Automatic parameter configuration based on ATR data
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 263 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1