[Pcsclite-cvs-commit] r4263 - in /trunk/Drivers/ccid/readers: Synnix_STD200.txt supported_readers.txt

[rousseau at users.alioth.debian.org]

Author: rousseau
Date: Fri Jun 19 19:09:27 2009
New Revision: 4263

URL: http://svn.debian.org/wsvn/pcsclite/?sc=1&rev=4263
Log:
add Synnix STD200

Added:
    trunk/Drivers/ccid/readers/Synnix_STD200.txt
Modified:
    trunk/Drivers/ccid/readers/supported_readers.txt

Added: trunk/Drivers/ccid/readers/Synnix_STD200.txt
URL: http://svn.debian.org/wsvn/pcsclite/trunk/Drivers/ccid/readers/Synnix_STD200.txt?rev=4263&op=file
==============================================================================
--- trunk/Drivers/ccid/readers/Synnix_STD200.txt (added)
+++ trunk/Drivers/ccid/readers/Synnix_STD200.txt Fri Jun 19 19:09:27 2009
@@ -1,0 +1,52 @@
+ idVendor: 0x1206
+  iManufacturer: SYNNIX
+ idProduct: 0x2105
+  iProduct: STD200
+ bcdDevice: 0.96 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: 4
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Broken pipe
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 129032 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Broken pipe
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x00010138
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ..01.. CCID can set ICC in clock stop mode
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0x00
+  bClassEnveloppe: 0x00
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

Modified: trunk/Drivers/ccid/readers/supported_readers.txt
URL: http://svn.debian.org/wsvn/pcsclite/trunk/Drivers/ccid/readers/supported_readers.txt?rev=4263&op=diff
==============================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt (original)
+++ trunk/Drivers/ccid/readers/supported_readers.txt Fri Jun 19 19:09:27 2009
@@ -217,6 +217,9 @@
 0x1E0D:0x0013 Neowave Weneo
 0x1E0D:0x8033 Neowave Weneo
 
+# Synnix
+0x1206:0x2105:Synnix STD200
+
 # Bogus readers but partly supported
 # See the README file for a bug description
 0x09C3:0x0008:ActivCard USB Reader 2.0