[Pcsclite-cvs-commit] r3371 - /website/supported.ini

Mon Mar 23 15:59:52 UTC 2009

Author: rousseau
Date: Mon Mar 23 15:59:52 2009
New Revision: 3371

URL: http://svn.debian.org/wsvn/pcsclite/?sc=1&rev=3371
Log:
reformat note entries

Modified:
    website/supported.ini

Modified: website/supported.ini
URL: http://svn.debian.org/wsvn/pcsclite/website/supported.ini?rev=3371&op=diff
==============================================================================

--- website/supported.ini (original)
+++ website/supported.ini Mon Mar 23 15:59:52 2009
@@ -5,9 +5,7 @@
 [ACR38U-CCID.txt]
 image = ACR38-CCID.png
 url = http://www.acs.com.hk/acr38ccid.php
-note = Old versions of this reader are bogus: the reader do timeout
-	  when a special USB frame is sent from the reader. If the frame
-	  size is a multiple of wMaxPacketSize the communication is stopped.
+note = Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped.
 [ActivCardV3.txt]
 [ActivkeySim.txt]
 image = ActivIdentity_key.png
@@ -24,14 +22,14 @@
 image = ASEDrive_IIIe_USB.png
 url = http://www.asedrive.com/product.asp?pid=1
 [AU9520.txt]
-note = Firmware 1.01 is bogus. The time request sent by the card is
-	  not forwarded by the reader to the host.
+note = Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host.
 [BludriveII.txt]
 image = BludriveII_CCID.png
 url = http://shop.blutronics.com/ViewProdotti.asp?IdMarca=3&Id=751
 [CardMan3121.txt]
 image = cardman3121.png
 url = http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=21
+iProduct = CardMan 3121
 [CherrySmartTerminalST2XXX.txt]
 image = ST_2000_UCR.png
 url = http://www.cherry.de/english/products/electronic_signature_smartterminal_st-2000u.htm
@@ -76,31 +74,14 @@
 [GemPCPinpad.txt]
 image = gempcpinpad.png
 url = http://www.gemalto.com/products/pc_pinpad/
-note = <p>Known problems/limitations:</P>
-		<ul>
-			<li>Does not support minimum PIN length (wPINMaxExtraDigit)
-			lower than 4</li>
-
-			<li>Does not support maximum PIN length (wPINMaxExtraDigit)
-			greater than 8</li>
-
-			<li>Does not support "no string" (0x00) displayed for
-			bNumberMessage (corrected by the driver)</li>
-
-			<li>Does not support "default" (0xFF) display message for
-			bNumberMessage (corrected by the driver)</li>
-
-			<li>Does not support validation by "Max size reached" (0x01)
-			for bEntryValidationCondition (corrected by the driver)</li>
-
-			<li>Does not support validation by "Timeout occurred" (0x04)
-			for bEntryValidationCondition (corrected by the driver)</li>
-
-			<li>Does send a VERIFY PIN command with an empty PIN to get
-			the number of remaining trials. This may be problematic with
-			some smart cards like the Belgian eID card that does not
-			support this and will decrement the counter</li>
-		</ul>
+note = Known problems/limitations:
+ Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4
+ Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8
+ Does not support "no string" (0x00) displayed for bNumberMessage (corrected by the driver)
+ Does not support "default" (0xFF) display message for bNumberMessage (corrected by the driver)
+ Does not support validation by "Max size reached" (0x01) for bEntryValidationCondition (corrected by the driver)
+ Does not support validation by "Timeout occurred" (0x04) for bEntryValidationCondition (corrected by the driver)
+ Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter
 iManufacturer = Gemalto
 [GemPCTwin.txt]
 image = gempctwin.jpg
@@ -117,7 +98,7 @@
 [KAAN_Advanced.txt]
 image = Kobil_Advanced.jpg
 url = http://www.kobil.com/index.php?id=68&type=7&L=0
-note = firmware older than 0.37 is bogus
+note = Firmware older than 0.37 is bogus
  Kobil readers does not support RDR_to_PC_DataBlock CCID commands chaining so you can't send an extended APDU even if the Kobil readers (with firmware 1.19) supports a command of up to 420 bytes.
  To use extended APDU on these readers you must change the value of CMD_BUF_SIZE in the file src/defs.h to: #define CMD_BUF_SIZE 420
  Kobil is aware of the problem and do not plan to solve it.
@@ -125,7 +106,7 @@
 [KAAN_Base.txt]
 image = Kobil_Base.jpg
 url = http://www.kobil.com/index.php?id=67&type=7&L=0
-note = firwmare older than 0.37 is bogus
+note = Firwmare older than 0.37 is bogus
  Kobil readers does not support RDR_to_PC_DataBlock CCID commands chaining so you can't send an extended APDU even if the Kobil readers (with firmware 1.19) supports a command of up to 420 bytes.
  To use extended APDU on these readers you must change the value of CMD_BUF_SIZE in the file src/defs.h to: #define CMD_BUF_SIZE 420
  Kobil is aware of the problem and do not plan to solve it.
@@ -150,6 +131,7 @@
 url = http://www.smartepad.com.br/index.htm
 [Neowave_Weneo.txt]
 [Omnikey_noname1.txt]
+iManufacturer = OMNIKEY AG
 [Oz776S.txt]
 note = This reader is common as an internal reader in laptops like the Dell D420 or D820.
 [SCR3310.txt]
@@ -183,6 +165,8 @@
 url = http://www.scmmicro.com/security/view_product_en.php?PID=13
 note = You have to upgrade the firmware using version 5.10 or later.
 [Teo.txt]
+iManufacturer = XIRING
+iProduct = Teo
 image = teo.png
 url = http://www.teobyxiring.com/
 [TianYu_CCID_SmartKey.txt]


