[Pcsclite-cvs-commit] r5237 - in /trunk/Drivers/ccid/readers: HP_kus-0133.txt supported_readers.txt

[rousseau at users.alioth.debian.org]

Author: rousseau
Date: Fri Sep  3 14:00:01 2010
New Revision: 5237

URL: http://svn.debian.org/wsvn/pcsclite/?sc=1&rev=5237
Log:
HP kus-0133 is not supported

Added:
    trunk/Drivers/ccid/readers/HP_kus-0133.txt
Modified:
    trunk/Drivers/ccid/readers/supported_readers.txt

Added: trunk/Drivers/ccid/readers/HP_kus-0133.txt
URL: http://svn.debian.org/wsvn/pcsclite/trunk/Drivers/ccid/readers/HP_kus-0133.txt?rev=5237&op=file
==============================================================================
--- trunk/Drivers/ccid/readers/HP_kus-0133.txt (added)
+++ trunk/Drivers/ccid/readers/HP_kus-0133.txt Fri Sep  3 14:00:01 2010
@@ -1,0 +1,65 @@
+ idVendor: 0x03F0
+  iManufacturer: Hewlett-Packard Company
+ idProduct: 0x0036
+  iProduct: HP USB CCID Smartcard Keyboard
+ bcdDevice: 1.22 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: HP USB CCID Keyboard Smartcard Reader
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x01
+   5.0V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 8.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   Support 4800 kHz
+   Support 6000 kHz
+   Support 8000 kHz
+   Support 12000 kHz
+  dwDataRate: 12903 bps
+  dwMaxDataRate: 307200 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   Support 12903 bps
+   Support 25806 bps
+   Support 51613 bps
+   Support 103226 bps
+   Support 10753 bps
+   Support 21505 bps
+   Support 43011 bps
+   Support 86022 bps
+  dwMaxIFSD: 252
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000001
+   Card accept mechanism
+  dwFeatures: 0x000100BA
+   ....02 Automatic parameter configuration based on ATR data
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x03
+   PIN Verification supported
+   PIN Modification supported
+  bMaxCCIDBusySlots: 1

Modified: trunk/Drivers/ccid/readers/supported_readers.txt
URL: http://svn.debian.org/wsvn/pcsclite/trunk/Drivers/ccid/readers/supported_readers.txt?rev=5237&op=diff
==============================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt (original)
+++ trunk/Drivers/ccid/readers/supported_readers.txt Fri Sep  3 14:00:01 2010
@@ -280,6 +280,7 @@
 #0x04E6:0x5292:SCM SCL01x Contactless Reader
 #0x062D:0x0001:iDream or ID-SMID01
 #0x1A74:0x6356:OCS ID-One Cosmo Card
+#0x03F0:0x0036:HP USB CCID Smartcard Keyboard
 
 # The USB descriptor is bogus and the patch in get_ccid_usb_interface()
 # does not work with libusb-1.0