[Pcsclite-cvs-commit] r6715 - trunk/Drivers/ccid/readers website
ludovic.rousseau at free.fr
ludovic.rousseau at free.fr
Mon Aug 5 19:51:03 UTC 2013
Author: rousseau
Date: 2013-08-05 19:51:03 +0000 (Mon, 05 Aug 2013)
New Revision: 6715
Added:
trunk/Drivers/ccid/readers/Ingenico_WITEO_badge.txt
trunk/Drivers/ccid/readers/Ingenico_WITEO_base.txt
Modified:
trunk/Drivers/ccid/readers/supported_readers.txt
website/supported.ini
Log:
Add Ingenico WITEO USB Smart Card Reader (Base and Badge)
Added: trunk/Drivers/ccid/readers/Ingenico_WITEO_badge.txt
===================================================================
--- trunk/Drivers/ccid/readers/Ingenico_WITEO_badge.txt (rev 0)
+++ trunk/Drivers/ccid/readers/Ingenico_WITEO_badge.txt 2013-08-05 19:51:03 UTC (rev 6715)
@@ -0,0 +1,55 @@
+ idVendor: 0x0F14
+ iManufacturer: Ingenico
+ idProduct: 0x003D
+ iProduct: WITEO USB Smart Card Reader
+ bcdDevice: 2.22 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ Can't get iInterface string
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x03
+ 5.0V
+ 3.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Operation timed out
+ dwDataRate: 10752 bps
+ dwMaxDataRate: 130000 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Operation timed out
+ dwMaxIFSD: 254
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000204BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ ..04.. Automatic IFSD exchange as first exchange (T=1)
+ 02.... Short APDU level exchange
+ dwMaxCCIDMessageLength: 271 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
Added: trunk/Drivers/ccid/readers/Ingenico_WITEO_base.txt
===================================================================
--- trunk/Drivers/ccid/readers/Ingenico_WITEO_base.txt (rev 0)
+++ trunk/Drivers/ccid/readers/Ingenico_WITEO_base.txt 2013-08-05 19:51:03 UTC (rev 6715)
@@ -0,0 +1,55 @@
+ idVendor: 0x0F14
+ iManufacturer: Ingenico
+ idProduct: 0x003D
+ iProduct: WITEO USB Smart Card Reader
+ bcdDevice: 1.22 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ Can't get iInterface string
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x03
+ 5.0V
+ 3.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Operation timed out
+ dwDataRate: 10752 bps
+ dwMaxDataRate: 130000 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Operation timed out
+ dwMaxIFSD: 254
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000204BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ ..04.. Automatic IFSD exchange as first exchange (T=1)
+ 02.... Short APDU level exchange
+ dwMaxCCIDMessageLength: 271 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
Modified: trunk/Drivers/ccid/readers/supported_readers.txt
===================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt 2013-08-05 19:38:26 UTC (rev 6714)
+++ trunk/Drivers/ccid/readers/supported_readers.txt 2013-08-05 19:51:03 UTC (rev 6715)
@@ -71,6 +71,9 @@
# id3 Semiconductors
0x0B81:0x0200:id3 Semiconductors CL1356T
+# Ingenico
+0x0F14:0x003D:Ingenico WITEO USB Smart Card Reader
+
# KOBIL
0x0D46:0x3001:KOBIL KAAN Base
0x0D46:0x3002:KOBIL KAAN Advanced
@@ -559,3 +562,6 @@
#0x0F14:0x0011:XIRING XI-SIGN USB V2 (Xiring_XI-SIGN.txt)
#0x0F14:0x0011:XIRING XI-SIGN USB V2 (Xiring_XI-SIGN_6000.txt)
+#0x0F14:0x003D:Ingenico WITEO USB Smart Card Reader (Ingenico_WITEO_badge.txt)
+#0x0F14:0x003D:Ingenico WITEO USB Smart Card Reader (Ingenico_WITEO_base.txt)
+
Modified: website/supported.ini
===================================================================
--- website/supported.ini 2013-08-05 19:38:26 UTC (rev 6714)
+++ website/supported.ini 2013-08-05 19:51:03 UTC (rev 6715)
@@ -140,6 +140,10 @@
image = CL1356T.png
features = contactless
iProduct = CL1356T
+[Ingenico_WITEO_base.txt]
+image = Ingenico_witeo_base.png
+[Ingenico_WITEO_badge.txt]
+image = Ingenico_witeo_badge.png
[KAAN_Advanced.txt]
image = Kobil_Advanced.png
url = http://www.kobil.com/index.php?id=68&type=7&L=0
More information about the Pcsclite-cvs-commit
mailing list