[Pcsclite-cvs-commit] r6904 - trunk/Drivers/ccid/readers website

ludovic.rousseau at free.fr ludovic.rousseau at free.fr
Sat May 31 15:59:14 UTC 2014


Author: rousseau
Date: 2014-05-31 15:59:14 +0000 (Sat, 31 May 2014)
New Revision: 6904

Added:
   trunk/Drivers/ccid/readers/Feitian_R502.txt
Modified:
   trunk/Drivers/ccid/readers/supported_readers.txt
   website/shouldwork.ini
Log:
Add Feitian R502


Added: trunk/Drivers/ccid/readers/Feitian_R502.txt
===================================================================
--- trunk/Drivers/ccid/readers/Feitian_R502.txt	                        (rev 0)
+++ trunk/Drivers/ccid/readers/Feitian_R502.txt	2014-05-31 15:59:14 UTC (rev 6904)
@@ -0,0 +1,171 @@
+ idVendor: 0x096E
+  iManufacturer: Feitian
+ idProduct: 0x060D
+  iProduct: R502
+ bcdDevice: 1.60 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: R502 Contactless Reader
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x01
+   5.0V
+  dwProtocols: 0x0000 0x0002
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Operation timed out
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 688172 bps
+  bNumDataRatesSupported: 44
+   IFD does not support GET_DATA_RATES request: Operation timed out
+  dwMaxIFSD: 61
+  dwSynchProtocols: 0x00000007
+   2-wire protocol
+   3-wire protocol
+   I2C protocol
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000104B8
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   ..04.. Automatic IFSD exchange as first exchange (T=1)
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnvelope: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1
+ idVendor: 0x096E
+  iManufacturer: Feitian
+ idProduct: 0x060D
+  iProduct: R502
+ bcdDevice: 1.60 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: R502 Contact Reader
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Operation timed out
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 688172 bps
+  bNumDataRatesSupported: 44
+   IFD does not support GET_DATA_RATES request: Operation timed out
+  dwMaxIFSD: 240
+  dwSynchProtocols: 0x00000007
+   2-wire protocol
+   3-wire protocol
+   I2C protocol
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000102B8
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   ..02.. NAD value other than 00 accepted (T=1)
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnvelope: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1
+ idVendor: 0x096E
+  iManufacturer: Feitian
+ idProduct: 0x060D
+  iProduct: R502
+ bcdDevice: 1.60 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 2
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: R502 SAM1 Reader
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Operation timed out
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 688172 bps
+  bNumDataRatesSupported: 44
+   IFD does not support GET_DATA_RATES request: Operation timed out
+  dwMaxIFSD: 240
+  dwSynchProtocols: 0x00000007
+   2-wire protocol
+   3-wire protocol
+   I2C protocol
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000102B8
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   ..02.. NAD value other than 00 accepted (T=1)
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnvelope: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

Modified: trunk/Drivers/ccid/readers/supported_readers.txt
===================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt	2014-05-29 15:49:34 UTC (rev 6903)
+++ trunk/Drivers/ccid/readers/supported_readers.txt	2014-05-31 15:59:14 UTC (rev 6904)
@@ -1,6 +1,6 @@
 #
 # List of readers supported by the CCID driver
-# Generated: 2014-05-23
+# Generated: 2014-05-31
 #
 # DO NOT EDIT BY HAND
 
@@ -208,6 +208,7 @@
 0x1DB2:0x088B:DUALi DRAGON NFC READER
 
 # Feitian
+0x096E:0x060D:Feitian R502
 0x096E:0x061A:Feitian bR301
 
 # Feitian Technologies
@@ -606,6 +607,10 @@
 #0x08E6:0x5504:Gemalto Prox SU USB PC LinkReader (GemProxSU.txt)
 #0x08E6:0x5504:Gemalto Prox SU USB PC LinkReader (GemProxSU.txt_i1)
 
+#0x096E:0x060D:Feitian R502 (Feitian_R502.txt)
+#0x096E:0x060D:Feitian R502 (Feitian_R502.txt_i1)
+#0x096E:0x060D:Feitian R502 (Feitian_R502.txt_i2)
+
 #0x0A5C:0x5801:Broadcom Corp 5880 (Broadcom_5880v2.txt)
 #0x0A5C:0x5801:Broadcom Corp 5880 (Broadcom_5880v2.txt_i1)
 

Modified: website/shouldwork.ini
===================================================================
--- website/shouldwork.ini	2014-05-29 15:49:34 UTC (rev 6903)
+++ website/shouldwork.ini	2014-05-31 15:59:14 UTC (rev 6904)
@@ -201,6 +201,10 @@
 [Feitian_bR301.txt]
 url = http://www.ftsafe.com/product/Smart_Reader/bR301
 image = Feitian_bR301.png
+[Feitian_R502.txt]
+url = http://www.ftsafe.com/product/Smart_Reader/Rockey_502
+image = Feitian_R502.png
+features = contactless
 [Feitian_SCR310.txt]
 image = Feitian-Rockey301-CCID.png
 url = http://www.ftsafe.com/products/reader301.html




More information about the Pcsclite-cvs-commit mailing list