[Pcsclite-git-commit] [CCID] 01/01: Add ACS ACR1251 Dual Reader

[Ludovic Rousseau]

This is an automated email from the git hooks/post-receive script.

rousseau pushed a commit to branch master
in repository CCID.

commit b5795d4eaa0302ca7a71c8135d96ee6154ac2667
Author: Ludovic Rousseau <ludovic.rousseau at free.fr>
Date:   Wed Jun 10 17:16:40 2015 +0200

    Add ACS ACR1251 Dual Reader
---
 readers/ACS_ACR1251_Dual_Reader.txt | 103 ++++++++++++++++++++++++++++++++++++
 readers/supported_readers.txt       |   6 ++-
 2 files changed, 108 insertions(+), 1 deletion(-)

diff --git a/readers/ACS_ACR1251_Dual_Reader.txt b/readers/ACS_ACR1251_Dual_Reader.txt
new file mode 100644
index 0000000..06c7d31
--- /dev/null
+++ b/readers/ACS_ACR1251_Dual_Reader.txt
@@ -0,0 +1,103 @@
+ idVendor: 0x072F
+  iManufacturer: ACS
+ idProduct: 0x221A
+  iProduct: ACR1251 Dual Reader
+ bcdDevice: 2.00 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: ACR1251 Dual Reader PICC
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0002
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Success
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 250000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Success
+  dwMaxIFSD: 512
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x00040040
+   ....40 Automatic parameters negotiation made by the CCID
+   04.... Short and Extended APDU level exchange
+  dwMaxCCIDMessageLength: 522 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1
+ idVendor: 0x072F
+  iManufacturer: ACS
+ idProduct: 0x221A
+  iProduct: ACR1251 Dual Reader
+ bcdDevice: 2.00 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: ACR1251 Dual Reader SAM
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 4.800 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Success
+  dwDataRate: 12903 bps
+  dwMaxDataRate: 344100 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Success
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000200BA
+   ....02 Automatic parameter configuration based on ATR data
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   02.... Short APDU level exchange
+  dwMaxCCIDMessageLength: 288 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x0000
+  bPINSupport: 0x03
+   PIN Verification supported
+   PIN Modification supported
+  bMaxCCIDBusySlots: 1
diff --git a/readers/supported_readers.txt b/readers/supported_readers.txt
index 77f07af..d9e57af 100644
--- a/readers/supported_readers.txt
+++ b/readers/supported_readers.txt
@@ -1,6 +1,6 @@
 #
 # List of readers supported by the CCID driver
-# Generated: 2015-05-28
+# Generated: 2015-06-10
 #
 # DO NOT EDIT BY HAND
 
@@ -122,6 +122,7 @@
 
 # ACS
 0x072F:0x1204:ACS ACR101 ICC Reader
+0x072F:0x221A:ACS ACR1251 Dual Reader
 0x072F:0x8201:ACS APG8201 PINhandy 1
 0x072F:0x8202:ACS APG8201 USB Reader
 0x072F:0x90DB:ACS CryptoMate64
@@ -633,6 +634,9 @@
 #0x058F:0x9520:Akasa AK-CR-03 (Akasa_AK-CR-03.txt)
 #0x058F:0x9520:Alcor Micro SCR001 (Alcor_SCR001.txt)
 
+#0x072F:0x221A:ACS ACR1251 Dual Reader (ACS_ACR1251_Dual_Reader.txt)
+#0x072F:0x221A:ACS ACR1251 Dual Reader (ACS_ACR1251_Dual_Reader.txt_i1)
+
 #0x072F:0x90CC:ACS ACR122U (ACR122U.txt)
 #0x072F:0x90CC:ACS ACR 38U-CCID (ACR38U-CCID.txt)
 #0x072F:0x90CC:ACS ACR100 (ACS_ACR100.txt)

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pcsclite/CCID.git