[Pcsclite-git-commit] [CCID] 01/02: Add Access IS NFC Smart Module
Ludovic Rousseau
rousseau at moszumanska.debian.org
Fri Oct 20 16:19:11 UTC 2017
This is an automated email from the git hooks/post-receive script.
rousseau pushed a commit to branch master
in repository CCID.
commit 49b6709a7969a0d6a61f50eb65a142888ff156d1
Author: Ludovic Rousseau <ludovic.rousseau at free.fr>
Date: Fri Oct 20 18:13:02 2017 +0200
Add Access IS NFC Smart Module
With idProduct 0x0164
---
readers/Access_IS_NFC_Smart_Module_0x0164.txt | 277 ++++++++++++++++++++++++++
readers/supported_readers.txt | 3 +-
2 files changed, 279 insertions(+), 1 deletion(-)
diff --git a/readers/Access_IS_NFC_Smart_Module_0x0164.txt b/readers/Access_IS_NFC_Smart_Module_0x0164.txt
new file mode 100644
index 0000000..e1ce741
--- /dev/null
+++ b/readers/Access_IS_NFC_Smart_Module_0x0164.txt
@@ -0,0 +1,277 @@
+ idVendor: 0x0DB5
+ iManufacturer: Access IS
+ idProduct: 0x0164
+ iProduct: NFC Smart Module
+ bcdDevice: 1.20 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ iInterface: NFC0
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 13.560 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
+ dwDataRate: 106000 bps
+ dwMaxDataRate: 848000 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
+ dwMaxIFSD: 2048
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x0004007A
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....40 Automatic parameters negotiation made by the CCID
+ 04.... Short and Extended APDU level exchange
+ dwMaxCCIDMessageLength: 2048 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
+ idVendor: 0x0DB5
+ iManufacturer: Access IS
+ idProduct: 0x0164
+ iProduct: NFC Smart Module
+ bcdDevice: 1.20 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ iInterface: SMC0
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
+ dwDataRate: 10752 bps
+ dwMaxDataRate: 10752 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
+ dwMaxIFSD: 1024
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x0004067E
+ ....02 Automatic parameter configuration based on ATR data
+ ....04 Automatic activation of ICC on inserting
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....40 Automatic parameters negotiation made by the CCID
+ ..02.. NAD value other than 00 accepted (T=1)
+ ..04.. Automatic IFSD exchange as first exchange (T=1)
+ 04.... Short and Extended APDU level exchange
+ dwMaxCCIDMessageLength: 1024 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
+ idVendor: 0x0DB5
+ iManufacturer: Access IS
+ idProduct: 0x0164
+ iProduct: NFC Smart Module
+ bcdDevice: 1.20 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 2
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ iInterface: SMC1
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
+ dwDataRate: 10752 bps
+ dwMaxDataRate: 10752 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
+ dwMaxIFSD: 1024
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x0004067E
+ ....02 Automatic parameter configuration based on ATR data
+ ....04 Automatic activation of ICC on inserting
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....40 Automatic parameters negotiation made by the CCID
+ ..02.. NAD value other than 00 accepted (T=1)
+ ..04.. Automatic IFSD exchange as first exchange (T=1)
+ 04.... Short and Extended APDU level exchange
+ dwMaxCCIDMessageLength: 1024 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
+ idVendor: 0x0DB5
+ iManufacturer: Access IS
+ idProduct: 0x0164
+ iProduct: NFC Smart Module
+ bcdDevice: 1.20 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 3
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ iInterface: SMC2
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
+ dwDataRate: 10752 bps
+ dwMaxDataRate: 10752 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
+ dwMaxIFSD: 1024
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x0004067E
+ ....02 Automatic parameter configuration based on ATR data
+ ....04 Automatic activation of ICC on inserting
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....40 Automatic parameters negotiation made by the CCID
+ ..02.. NAD value other than 00 accepted (T=1)
+ ..04.. Automatic IFSD exchange as first exchange (T=1)
+ 04.... Short and Extended APDU level exchange
+ dwMaxCCIDMessageLength: 1024 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
+ idVendor: 0x0DB5
+ iManufacturer: Access IS
+ idProduct: 0x0164
+ iProduct: NFC Smart Module
+ bcdDevice: 1.20 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 4
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ bulk transfer, optional interrupt-IN (CCID)
+ iInterface: SMC3
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.10
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
+ dwDataRate: 10752 bps
+ dwMaxDataRate: 10752 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
+ dwMaxIFSD: 1024
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x0004067E
+ ....02 Automatic parameter configuration based on ATR data
+ ....04 Automatic activation of ICC on inserting
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....40 Automatic parameters negotiation made by the CCID
+ ..02.. NAD value other than 00 accepted (T=1)
+ ..04.. Automatic IFSD exchange as first exchange (T=1)
+ 04.... Short and Extended APDU level exchange
+ dwMaxCCIDMessageLength: 1024 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnvelope: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
diff --git a/readers/supported_readers.txt b/readers/supported_readers.txt
index fac4032..fce3709 100644
--- a/readers/supported_readers.txt
+++ b/readers/supported_readers.txt
@@ -1,6 +1,6 @@
#
# List of readers supported by the CCID driver
-# Generated: 2017-10-02
+# Generated: 2017-10-20
#
# DO NOT EDIT BY HAND
@@ -124,6 +124,7 @@
# Access IS
0x0DB5:0x0138:Access IS ePassport Reader
0x0DB5:0x0160:Access IS NFC Smart Module
+0x0DB5:0x0164:Access IS NFC Smart Module
# ACS
0x072F:0x1204:ACS ACR101 ICC Reader
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pcsclite/CCID.git
More information about the Pcsclite-cvs-commit
mailing list