[Pcsclite-muscle] Jinmuyu MR800 card reader problem

[Frédéric Marchal]

On dimanche 11 juin 2017 15 h 58 min 18 s CEST Ludovic Rousseau wrote:
> Hello,
> 
> The first step for a not yet supported CCID device is to follow
> http://pcsclite.alioth.debian.org/ccid.html#CCID_compliant

The requested output.txt file is attached to this e-mail.

The manufacturer web site is http://www.jinmuyu.com/hf-smart-readers/
mr800.html

The technical documentation is here: http://www.jinmuyu.com/download/JINMUYU
%20Compatible%20USB%20PCSC%20IC%20Card%20Reader%20General%20Technical
%20Manual.pdf (in bad English and the documentation is lacking).

The pictures on the manufacturer site are accurate.

Please let me know if you need additional information.

Thanks for your support

Frédéric
-------------- next part --------------
 idVendor: 0x03EB
  iManufacturer: Jinmuyu Electronics Co., Ltd.
 idProduct: 0x6120
  iProduct: MR800
 bcdDevice: 1.00 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 2
  bulk-IN and bulk-OUT
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: CCID
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x01
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 3.686 MHz
  dwMaximumClock: 3.686 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
  dwDataRate: 9600 bps
  dwMaxDataRate: 9600 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
  dwMaxIFSD: 254
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000401BE
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..01.. CCID can set ICC in clock stop mode
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 527 bytes
  bClassGetResponse: 0x00
  bClassEnvelope: 0x00
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1