[Pkg-bitcoin-commits] [cgminer] 02/02: refreshed manpage

[Scott Sheridan Howard]

This is an automated email from the git hooks/post-receive script.

showard pushed a commit to branch master
in repository cgminer.

commit ca566754375142214d9ebdd6f2cecbb8ab1ff3b8
Author: Scott Howard <showard314 at gmail.com>
Date:   Sat Nov 8 12:44:02 2014 -0500

    refreshed manpage
---
 debian/cgminer.1 | 71 +-------------------------------------------------------
 1 file changed, 1 insertion(+), 70 deletions(-)

diff --git a/debian/cgminer.1 b/debian/cgminer.1
index 33d8c7d..bff13cd 100644
--- a/debian/cgminer.1
+++ b/debian/cgminer.1
@@ -7,7 +7,7 @@ cgminer \- multi-threaded multi-pool GPU, FPGA and CPU bitcoin miner.
 [\fI-DElmpPQqUSsTouOchnV\fR]
 .SH DESCRIPTION
 multi-threaded multi-pool GPU, FPGA and CPU bitcoin miner.
-Built with ant.S1 avalon avalon2 bflsc bitforce bitfury cointerra drillbit hashfast icarus klondike KnC BaB minion modminer Bitmine.A1 spondoolies sp30 mining support.
+Built with avalon avalon2 bflsc bitfury cointerra drillbit hashfast icarus klondike mining support.
 .PP
 .SH OPTIONS
 
@@ -90,9 +90,6 @@ Set Avalon2 fan to fixed speed
 \fB\-\-avalon2\-polling\-delay\fR <arg> 
 Set Avalon2 polling delay value (ms) (default: 20)
 .TP
-\fB\-\-bab\-options\fR <arg> 
-Set bab options max:def:min:up:down:hz:delay:trf
-.TP
 \fB\-\-balance\fR           
 Change multipool strategy from failover to even share balance
 .TP
@@ -105,9 +102,6 @@ Display each benchfile nonce found
 \fB\-\-benchmark\fR         
 Run cgminer in benchmark mode \- produces no shares
 .TP
-\fB\-\-bfl\-range\fR         
-Use nonce range on bitforce devices if supported
-.TP
 \fB\-\-bflsc\-overheat\fR <arg> 
 Set overheat temperature where BFLSC devices throttle, 0 to disable (default: 85)
 .TP
@@ -120,30 +114,6 @@ Set BitBurner Fury core voltage, in millivolts
 \fB\-\-bitburner\-fury\-options\fR <arg> 
 Override avalon\-options for BitBurner Fury boards baud:miners:asic:timeout:freq
 .TP
-\fB\-\-bitmain\-auto\fR      
-Adjust bitmain overclock frequency dynamically for best hashrate
-.TP
-\fB\-\-bitmain\-cutoff\fR <arg> 
-Set bitmain overheat cut off temperature (default: 75)
-.TP
-\fB\-\-bitmain\-fan\fR       
-Set fanspeed percentage for bitmain, single value or range (default: 20\-100)
-.TP
-\fB\-\-bitmain\-freq\fR      
-Set frequency range for bitmain\-auto, single value or range
-.TP
-\fB\-\-bitmain\-hwerror\fR   
-Set bitmain device detect hardware error
-.TP
-\fB\-\-bitmain\-options\fR <arg> 
-Set bitmain options baud:miners:asic:timeout:freq
-.TP
-\fB\-\-bitmain\-temp\fR <arg> 
-Set bitmain target temperature (default: 50)
-.TP
-\fB\-\-bitmine\-a1\-options\fR <arg> 
-Bitmine A1 options ref_clk_khz:sys_clk_khz:spi_clk_khz:override_chip_num
-.TP
 \fB\-\-bxf\-bits\fR <arg>    
 Set max BXF/HXF bits for overclocking (default: 54)
 .TP
@@ -237,45 +207,6 @@ Interval in seconds between log output (default: 5)
 \fB\-\-lowmem\fR            
 Minimise caching of shares for low memory applications
 .TP
-\fB\-\-minion\-chipreport\fR <arg> 
-Seconds to report chip 5min hashrate, range 0\-100 (default: 0=disabled) (default: 0)
-.TP
-\fB\-\-minion\-freq\fR <arg> 
-Set minion chip frequencies in MHz, single value or comma list, range 100\-1400 (default: 1200)
-.TP
-\fB\-\-minion\-freqchange\fR <arg> 
-Millisecond total time to do frequency changes (default: 1000) (default: 1000)
-.TP
-\fB\-\-minion\-freqpercent\fR <arg> 
-Percentage to use when starting up a chip (default: 70%) (default: 70)
-.TP
-\fB\-\-minion\-idlecount\fR  
-Report when IdleCount is >0 or changes
-.TP
-\fB\-\-minion\-ledcount\fR <arg> 
-Turn off led when more than this many chips below the ledlimit (default: 0) (default: 0)
-.TP
-\fB\-\-minion\-ledlimit\fR <arg> 
-Turn off led when chips GHs are below this (default: 90) (default: 98)
-.TP
-\fB\-\-minion\-noautofreq\fR 
-Disable automatic frequency adjustment
-.TP
-\fB\-\-minion\-overheat\fR   
-Enable directly halting any chip when the status exceeds 100C
-.TP
-\fB\-\-minion\-spidelay\fR <arg> 
-Add a delay in microseconds after each SPI I/O (default: 0)
-.TP
-\fB\-\-minion\-spireset\fR <arg> 
-SPI regular reset: iNNN for I/O count or sNNN for seconds \- 0 means none
-.TP
-\fB\-\-minion\-spisleep\fR <arg> 
-Sleep time in milliseconds when doing an SPI reset (default: 200)
-.TP
-\fB\-\-minion\-temp\fR <arg> 
-Set minion chip temperature threshold, single value or comma list, range 120\-160 (default: 135C)
-.TP
 \fB\-\-monitor\fR|\-m <arg>  
 Use custom pipe cmd for output messages
 .TP

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-bitcoin/cgminer.git