[Pkg-chromium-maint] Bug#687471: When compositing is running, chromium-browser has display issues when trying to maximize/minimize
Jonathan Nieder
jrnieder at gmail.com
Thu Sep 13 21:24:30 UTC 2012
Matt Harrison wrote:
> It is reproducible, every single time, so long as compositing is on.
>
> Here is the reportbug command output
> http://pastebin.com/dYbEumWx
Attached.
> Here is dmesg
> http://pastebin.com/JXapY1t1
Seems to be missing ("Unknown Paste ID"). Could you send it again?
Thanks,
Jonathan
-------------- next part --------------
matt at matt-desktop:~$ reportbug --template linux-image-$(uname -r)
Detected character set: UTF-8
Please change your locale if this is incorrect.
Using 'Matt Harrison <matt.harrison82 at gmail.com>' as your from address.
Getting status for linux-image-3.2.0-3-amd64...
Will send report to Debian (per lsb_release).
Maintainer for linux-image-3.2.0-3-amd64 is 'Debian Kernel Team <debian-kernel at lists.debian.org>'.
Looking up dependencies of linux-image-3.2.0-3-amd64...
Getting status for related package src:linux...
Looking up status of additional packages...
Rewriting subject to 'linux-image-3.2.0-3-amd64: none'
Gathering additional data, this may take a while...
Include network configuration and status from this computer? n
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Matt Harrison <matt.harrison82 at gmail.com>
To: Debian Bug Tracking System <submit at bugs.debian.org>
Subject: linux-image-3.2.0-3-amd64: none
X-Debbugs-Cc: matt.harrison82 at gmail.com
Package: src:linux
Version: 3.2.23-1
Severity: wishlist
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=b6579d5f-05bd-4db5-ac12-8729571566af ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 6.499888] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[ 6.499890] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 6.499892] [drm] nouveau 0000:02:00.0: 1: 0x00000200: type 0x00 idx 1 tag 0xff
[ 6.499894] [drm] nouveau 0000:02:00.0: 2: 0x00000110: type 0x10 idx 2 tag 0xff
[ 6.499896] [drm] nouveau 0000:02:00.0: 3: 0x00000111: type 0x11 idx 3 tag 0xff
[ 6.499897] [drm] nouveau 0000:02:00.0: 4: 0x00000113: type 0x13 idx 4 tag 0xff
[ 6.499901] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC1F1
[ 6.522914] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC53D
[ 6.539129] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD17E
[ 6.539136] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD270
[ 6.540202] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xD46A
[ 6.540204] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xD4CF
[ 6.560050] [drm] nouveau 0000:02:00.0: 0xD4CF: Condition still not met after 20ms, skipping following opcodes
[ 6.560128] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
[ 6.578810] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[ 6.578814] [drm] nouveau 0000:02:00.0: 0: core 459MHz shader 918MHz memory 330MHz fanspeed 100%
[ 6.578825] [drm] nouveau 0000:02:00.0: c: core 459MHz shader 918MHz memory 300MHz
[ 6.580097] [TTM] Zone kernel: Available graphics memory: 4100156 kiB.
[ 6.580100] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 6.580101] [TTM] Initializing pool allocator.
[ 6.580113] [drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[ 6.580930] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 6.588813] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[ 6.588836] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[ 6.599946] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.599948] [drm] No driver support for vblank timestamp query.
[ 6.754123] [drm] nouveau 0000:02:00.0: allocated 1600x900 fb: 0x320000, bo ffff880233c1b400
[ 6.754253] fbcon: nouveaufb (fb0) is primary device
[ 6.772155] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.773564] Registered led device: rt2800usb-phy0::radio
[ 6.773614] Registered led device: rt2800usb-phy0::assoc
[ 6.773664] Registered led device: rt2800usb-phy0::quality
[ 6.773724] usbcore: registered new interface driver rt2800usb
[ 6.799813] Console: switching to colour frame buffer device 200x56
[ 6.801778] fb0: nouveaufb frame buffer device
[ 6.801779] drm: registered panic notifier
[ 6.801784] [drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
[ 7.941174] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 8.917089] Adding 7811068k swap on /dev/sdb1. Priority:-1 extents:1 across:7811068k
[ 8.955929] EXT4-fs (sdb5): re-mounted. Opts: (null)
[ 9.465640] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 9.610670] loop: module loaded
[ 11.100254] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 11.270772] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.217389] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[ 12.217601] forcedeth 0000:00:07.0: eth0: no link during initialization
[ 12.220926] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.308391] RPC: Registered named UNIX socket transport module.
[ 12.308399] RPC: Registered udp transport module.
[ 12.308405] RPC: Registered tcp transport module.
[ 12.308410] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.341752] FS-Cache: Loaded
[ 12.497660] FS-Cache: Netfs 'nfs' registered for caching
[ 12.510935] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 15.744545] vboxdrv: Found 4 processor cores.
[ 15.744992] vboxdrv: fAsync=0 offMin=0xa95 offMax=0xc963
[ 15.745187] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 15.745194] vboxdrv: Successfully loaded version 4.1.22 (interface 0x00190000).
[ 16.379011] vboxpci: IOMMU not found (not registered)
[ 16.578494] lp0: using parport0 (interrupt-driven).
[ 16.661382] ppdev: user-space parallel port driver
[ 20.928269] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.427589] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.712754] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[ 44.712968] forcedeth 0000:00:07.0: eth0: no link during initialization
[ 44.716239] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.327130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.986740] wlan0: authenticate with 08:86:3b:33:1d:5e (try 1)
[ 48.988260] wlan0: authenticated
[ 48.988335] wlan0: associate with 08:86:3b:33:1d:5e (try 1)
[ 48.992102] wlan0: RX AssocResp from 08:86:3b:33:1d:5e (capab=0x411 status=0 aid=2)
[ 48.992112] wlan0: associated
[ 49.022556] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.600048] wlan0: no IPv6 routers present
[76205.680081] usb 1-5: new high-speed USB device number 5 using ehci_hcd
[76205.815108] usb 1-5: New USB device found, idVendor=1004, idProduct=6317
[76205.815119] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[76205.815126] usb 1-5: Product: LG Android USB Device
[76205.815132] usb 1-5: Manufacturer: LG Electronics Inc.
[76205.815137] usb 1-5: SerialNumber: LGOTMS43d6ec
[76205.819953] scsi7 : usb-storage 1-5:1.7
[76205.895311] cdc_ether 1-5:1.5: usb0: register 'cdc_ether' at usb-0000:00:02.1-5, CDC Ethernet Device, ae:cb:74:42:86:13
[76205.895498] usbcore: registered new interface driver cdc_ether
[76205.897085] cdc_acm 1-5:1.0: This device cannot do calls on its own. It is not a modem.
[76205.897306] cdc_acm 1-5:1.0: ttyACM0: USB ACM device
[76205.898531] usbcore: registered new interface driver cdc_acm
[76205.898540] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[76206.821308] scsi 7:0:0:0: Direct-Access LGE Mass storage 0100 PQ: 0 ANSI: 2
[76206.823638] sd 7:0:0:0: Attached scsi generic sg4 type 0
[76206.826304] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[87887.073143] reportbug[989] trap divide error ip:7f1546b56470 sp:7f15406b5f40 error:0 in libgtk-x11-2.0.so.0.2400.10[7f1546a24000+432000]
[88750.118773] usb 1-5: USB disconnect, device number 5
[88750.119685] cdc_ether 1-5:1.5: usb0: unregister 'cdc_ether' usb-0000:00:02.1-5, CDC Ethernet Device
[105757.284106] ieee80211 phy0: wlan0: No probe response from AP 08:86:3b:33:1d:5e after 500ms, disconnecting.
[105757.389538] cfg80211: Calling CRDA to update world regulatory domain
[105758.766927] wlan0: authenticate with 08:86:3b:33:1d:5e (try 1)
[105758.768465] wlan0: authenticated
[105758.772810] wlan0: associate with 08:86:3b:33:1d:5e (try 1)
[105758.777979] wlan0: RX AssocResp from 08:86:3b:33:1d:5e (capab=0x411 status=0 aid=3)
[105758.777989] wlan0: associated
** Model information
sys_vendor: BIOSTAR Group
product_name: N68S3+
product_version:
chassis_vendor: BIOSTAR Group
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: BIOSTAR Group
board_name: N68S3+
board_version:
** Loaded modules:
cdc_acm
cdc_ether
usbnet
mii
cryptd
aes_x86_64
aes_generic
ppdev
lp
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
nouveau
mac80211
cfg80211
rfkill
mxm_wmi
crc_ccitt
wmi
video
ttm
drm_kms_helper
snd_hda_intel
snd_hda_codec
snd_hwdep
drm
snd_pcm
snd_page_alloc
parport_pc
i2c_algo_bit
i2c_nforce2
evdev
i2c_core
parport
pcspkr
snd_seq
snd_seq_device
snd_timer
powernow_k8
snd
k10temp
edac_mce_amd
edac_core
mperf
processor
button
soundcore
ext4
crc16
jbd2
mbcache
sr_mod
sg
cdrom
sd_mod
crc_t10dif
usb_storage
usbhid
hid
uas
ata_generic
sata_nv
ohci_hcd
pata_amd
thermal
thermal_sys
libata
scsi_mod
forcedeth
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e1] (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 4f00 [size=256]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4900 [size=64]
Region 4: I/O ports at 4d00 [size=64]
Region 5: I/O ports at 4e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller [10de:03f1] (rev a3) (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dbfff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller [10de:03f2] (rev a3) (prog-if 20 [EHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at dbffec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device [1565:821f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at dbff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 43
Region 0: Memory at dbffd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d080 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Biostar Microtech Int'l Corp Device [1565:5405]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at cc00 [size=4]
Region 2: I/O ports at c880 [size=8]
Region 3: I/O ports at c800 [size=4]
Region 4: I/O ports at c480 [size=16]
Region 5: Memory at dbffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Biostar Microtech Int'l Corp Device [1565:5405]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c080 [size=4]
Region 2: I/O ports at c000 [size=8]
Region 3: I/O ports at bc00 [size=4]
Region 4: I/O ports at b880 [size=16]
Region 5: Memory at dbff7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dc000000-dfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86 [GeForce 8400 GS] [10de:0422] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ec00 [size=128]
Expansion ROM at defe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1737:0078 Linksys WUSB100 v2 RangePlus Wireless Network Adapter [Ralink RT3070]
Bus 001 Device 004: ID 0bc2:0503 Seagate RSS LLC
Bus 002 Device 002: ID 05fe:1010 Chic Technology Corp. Optical Wireless
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.2.0-3-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.36
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
If you want to provide additional information, please wait to receive the bug
tracking number via email; you may then send any extra information to
n at bugs.debian.org (e.g. 999999 at bugs.debian.org), where n is the bug number.
Normally you will receive an acknowledgement via email including the bug report
number within an hour; if you haven't received a confirmation, then the bug
reporting process failed at some point (reportbug or MTA failure, BTS
maintenance, etc.).
More information about the Pkg-chromium-maint
mailing list