Bug#606785: stumpwm: package fails to upgrade properly from lenny
Lucas Nussbaum
lucas at lucas-nussbaum.net
Sat Dec 11 17:48:45 UTC 2010
Package: stumpwm
Version: 1:20090804.git9d6cb388-1
Severity: serious
User: debian-qa at lists.debian.org
Usertags: instest-20101211 instest
Hi,
While testing the installation of all packages in squeeze, I ran
into the following problem:
> -- Now testing upgrade from lenny64-instest.
> -- Finding version in lenny64-instest: stumpwm 1:20080721-2
> -- Installing stumpwm in lenny64-instest: OK
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Starting
> Starting 2
> Done
> The following extra packages will be installed:
> binfmt-support cl-asdf cl-ppcre clisp common-lisp-controller ifupdown
> libffcall1 libgdbm3 libsigsegv0 libx11-6 libx11-data libxau6 libxcb-xlib0
> libxcb1 libxdmcp6 libxext6 libxpm4 net-tools netbase perl perl-modules
> realpath sbcl x11-common
> Suggested packages:
> gdb clisp-doc clisp-dev slime iproute dhcp3-client dhcp-client ppp perl-doc
> libterm-readline-gnu-perl libterm-readline-perl-perl sbcl-doc sbcl-source
> x-terminal-emulator www-browser info-browser menu x11-utils rlwrap
> The following NEW packages will be installed:
> binfmt-support cl-asdf cl-ppcre clisp common-lisp-controller ifupdown
> libffcall1 libgdbm3 libsigsegv0 libx11-6 libx11-data libxau6 libxcb-xlib0
> libxcb1 libxdmcp6 libxext6 libxpm4 net-tools netbase perl perl-modules
> realpath sbcl stumpwm x11-common
> 0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
> Need to get 25.0MB of archives.
> After this operation, 103MB of additional disk space will be used.
> Get:1 http://localhost lenny/main libxau6 1:1.0.3-3 [12.5kB]
> Get:2 http://localhost lenny/main libxdmcp6 1:1.0.2-3 [17.9kB]
> Get:3 http://localhost lenny/main libxcb1 1.1-1.2 [47.5kB]
> Get:4 http://localhost lenny/main libxcb-xlib0 1.1-1.2 [15.4kB]
> Get:5 http://localhost lenny/main libx11-data 2:1.1.5-2 [169kB]
> Get:6 http://localhost lenny/main libx11-6 2:1.1.5-2 [660kB]
> Get:7 http://localhost lenny/main x11-common 1:7.3+20 [343kB]
> Get:8 http://localhost lenny/main libxext6 2:1.0.4-2 [37.3kB]
> Get:9 http://localhost lenny/main libxpm4 1:3.5.7-1 [41.9kB]
> Get:10 http://localhost lenny/main libffcall1 1.10+2.41-3 [9798B]
> Get:11 http://localhost lenny/main libsigsegv0 2.5-2 [20.9kB]
> Get:12 http://localhost lenny/main cl-asdf 1.111-1 [211kB]
> Get:13 http://localhost lenny/main realpath 1.12 [7452B]
> Get:14 http://localhost lenny/main perl-modules 5.10.0-19lenny2 [3198kB]
> Get:15 http://localhost lenny/main libgdbm3 1.8.3-3 [23.4kB]
> Get:16 http://localhost lenny/main perl 5.10.0-19lenny2 [5220kB]
> Get:17 http://localhost lenny/main common-lisp-controller 6.17 [32.0kB]
> Get:18 http://localhost lenny/main clisp 1:2.44.1-4.1 [4505kB]
> Get:19 http://localhost lenny/main net-tools 1.60-22 [286kB]
> Get:20 http://localhost lenny/main ifupdown 0.6.8+nmu1 [48.0kB]
> Get:21 http://localhost lenny/main netbase 4.34 [18.5kB]
> Get:22 http://localhost lenny/main binfmt-support 1.2.11 [21.4kB]
> Get:23 http://localhost lenny/main cl-ppcre 1.3.2-2 [105kB]
> Get:24 http://localhost lenny/main sbcl 1:1.0.18.0-2 [9666kB]
> Get:25 http://localhost lenny/main stumpwm 1:20080721-2 [247kB]
> Preconfiguring packages ...
> Fetched 25.0MB in 2s (8509kB/s)
> Selecting previously deselected package libxau6.
> (Reading database ... 5925 files and directories currently installed.)
> Unpacking libxau6 (from .../libxau6_1%3a1.0.3-3_amd64.deb) ...
> Selecting previously deselected package libxdmcp6.
> Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.2-3_amd64.deb) ...
> Selecting previously deselected package libxcb1.
> Unpacking libxcb1 (from .../libxcb1_1.1-1.2_amd64.deb) ...
> Selecting previously deselected package libxcb-xlib0.
> Unpacking libxcb-xlib0 (from .../libxcb-xlib0_1.1-1.2_amd64.deb) ...
> Selecting previously deselected package libx11-data.
> Unpacking libx11-data (from .../libx11-data_2%3a1.1.5-2_all.deb) ...
> Selecting previously deselected package libx11-6.
> Unpacking libx11-6 (from .../libx11-6_2%3a1.1.5-2_amd64.deb) ...
> Selecting previously deselected package x11-common.
> Unpacking x11-common (from .../x11-common_1%3a7.3+20_all.deb) ...
> Selecting previously deselected package libxext6.
> Unpacking libxext6 (from .../libxext6_2%3a1.0.4-2_amd64.deb) ...
> Selecting previously deselected package libxpm4.
> Unpacking libxpm4 (from .../libxpm4_1%3a3.5.7-1_amd64.deb) ...
> Selecting previously deselected package libffcall1.
> Unpacking libffcall1 (from .../libffcall1_1.10+2.41-3_amd64.deb) ...
> Selecting previously deselected package libsigsegv0.
> Unpacking libsigsegv0 (from .../libsigsegv0_2.5-2_amd64.deb) ...
> Selecting previously deselected package cl-asdf.
> Unpacking cl-asdf (from .../cl-asdf_1.111-1_all.deb) ...
> Selecting previously deselected package realpath.
> Unpacking realpath (from .../realpath_1.12_amd64.deb) ...
> Selecting previously deselected package perl-modules.
> Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny2_all.deb) ...
> Selecting previously deselected package libgdbm3.
> Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ...
> Selecting previously deselected package perl.
> Unpacking perl (from .../perl_5.10.0-19lenny2_amd64.deb) ...
> Selecting previously deselected package common-lisp-controller.
> Unpacking common-lisp-controller (from .../common-lisp-controller_6.17_all.deb) ...
> Setting up libxau6 (1:1.0.3-3) ...
> Setting up libxdmcp6 (1:1.0.2-3) ...
> Setting up libxcb1 (1.1-1.2) ...
> Setting up libxcb-xlib0 (1.1-1.2) ...
> Setting up libx11-data (2:1.1.5-2) ...
> Setting up libx11-6 (2:1.1.5-2) ...
> Setting up x11-common (1:7.3+20) ...
> Setting up libxext6 (2:1.0.4-2) ...
> Setting up libxpm4 (1:3.5.7-1) ...
> Selecting previously deselected package clisp.
> (Reading database ... 7586 files and directories currently installed.)
> Unpacking clisp (from .../clisp_1%3a2.44.1-4.1_amd64.deb) ...
> Selecting previously deselected package net-tools.
> Unpacking net-tools (from .../net-tools_1.60-22_amd64.deb) ...
> Selecting previously deselected package ifupdown.
> Unpacking ifupdown (from .../ifupdown_0.6.8+nmu1_amd64.deb) ...
> Selecting previously deselected package netbase.
> Unpacking netbase (from .../archives/netbase_4.34_all.deb) ...
> Selecting previously deselected package binfmt-support.
> Unpacking binfmt-support (from .../binfmt-support_1.2.11_all.deb) ...
> Selecting previously deselected package cl-ppcre.
> Unpacking cl-ppcre (from .../cl-ppcre_1.3.2-2_all.deb) ...
> Selecting previously deselected package sbcl.
> Unpacking sbcl (from .../sbcl_1%3a1.0.18.0-2_amd64.deb) ...
> Selecting previously deselected package stumpwm.
> Unpacking stumpwm (from .../stumpwm_1%3a20080721-2_all.deb) ...
> Setting up libffcall1 (1.10+2.41-3) ...
> Setting up libsigsegv0 (2.5-2) ...
> Setting up cl-asdf (1.111-1) ...
> Reinstalling for clisp
> Recompiling Common Lisp Controller for clisp
> Installing clc...
> ;; Loading file /usr/lib/clisp-2.44.1/install-clc.lisp ...
> ;; Loading file /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp ...
> ;; Loaded file /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/common-lisp-controller.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/common-lisp-controller.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/cl-asdf/asdf.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/cl-asdf/asdf.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/cl-asdf/wild-modules.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/cl-asdf/wild-modules.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/post-sysdef-install.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/post-sysdef-install.fas
> ;; Loaded file /usr/lib/clisp-2.44.1/install-clc.lisp
> ;; Wrote the memory image into /usr/lib/clisp-2.44.1/full/lispinit.mem (5,487,344 bytes)
> created /usr/lib/clisp-2.44.1/full/lispinit.mem as expected.
> -rw-r--r-- 1 root root 5487344 Dec 11 13:56 /usr/lib/clisp-2.44.1/full/lispinit.mem
>
> Done rebuilding
> Reinstalling for sbcl
> Recompiling Common Lisp Controller for sbcl
> /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V5 in DEFUN
> STYLE-WARNING: redefining COMPILE-COMMON-LISP-CONTROLLER-V5 in DEFUN
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V4 in DEFUN
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER in DEFUN
> ; loading system definition from /usr/lib/sbcl/sb-grovel/sb-grovel.asd into
> ; #<PACKAGE "ASDF1">
> ; registering #<SYSTEM SB-GROVEL {1002C88191}> as SB-GROVEL
>
> [undoing binding stack and other enclosing state... done]
> [saving current Lisp image into /usr/lib/sbcl/sbcl-new.core:
> writing 6224 bytes from the read-only space at 0x20000000
> writing 3872 bytes from the static space at 0x20100000
> writing 40280064 bytes from the dynamic space at 0x1000000000
> done]
>
> Done rebuilding
> Setting up realpath (1.12) ...
> Setting up libgdbm3 (1.8.3-3) ...
> Setting up net-tools (1.60-22) ...
> Setting up ifupdown (0.6.8+nmu1) ...
> df: Warning: cannot read table of mounted file systems: No such file or directory
> ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
> ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
> Setting up netbase (4.34) ...
> Setting up perl-modules (5.10.0-19lenny2) ...
> Setting up perl (5.10.0-19lenny2) ...
> Setting up common-lisp-controller (6.17) ...
> Reinstalling for clisp
> Recompiling Common Lisp Controller for clisp
> Installing clc...
> ;; Loading file /usr/lib/clisp-2.44.1/install-clc.lisp ...
> ;; Loading file /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp ...
> ;; Loaded file /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/common-lisp-controller.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/common-lisp-controller.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/cl-asdf/asdf.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/cl-asdf/asdf.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/cl-asdf/wild-modules.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/cl-asdf/wild-modules.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/post-sysdef-install.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/post-sysdef-install.fas
> ;; Loaded file /usr/lib/clisp-2.44.1/install-clc.lisp
> ;; Wrote the memory image into /usr/lib/clisp-2.44.1/full/lispinit.mem (5,487,344 bytes)
> created /usr/lib/clisp-2.44.1/full/lispinit.mem as expected.
> -rw-r--r-- 1 root root 5487344 Dec 11 13:56 /usr/lib/clisp-2.44.1/full/lispinit.mem
>
> Done rebuilding
> Reinstalling for sbcl
> Recompiling Common Lisp Controller for sbcl
> /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V5 in DEFUN
> STYLE-WARNING: redefining COMPILE-COMMON-LISP-CONTROLLER-V5 in DEFUN
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V4 in DEFUN
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER in DEFUN
> ; loading system definition from /usr/lib/sbcl/sb-grovel/sb-grovel.asd into
> ; #<PACKAGE "ASDF1">
> ; registering #<SYSTEM SB-GROVEL {1002C85B81}> as SB-GROVEL
>
> [undoing binding stack and other enclosing state... done]
> [saving current Lisp image into /usr/lib/sbcl/sbcl-new.core:
> writing 6224 bytes from the read-only space at 0x20000000
> writing 3872 bytes from the static space at 0x20100000
> writing 40280064 bytes from the dynamic space at 0x1000000000
> done]
>
> Done rebuilding
> Setting up clisp (1:2.44.1-4.1) ...
> Installing clc...
> ;; Loading file /usr/lib/clisp-2.44.1/install-clc.lisp ...
> ;; Loading file /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp ...
> ;; Loaded file /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/common-lisp-controller.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/common-lisp-controller.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/cl-asdf/asdf.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/cl-asdf/asdf.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/cl-asdf/wild-modules.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/cl-asdf/wild-modules.fas
> ;; Loading file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/post-sysdef-install.fas ...
> ;; Loaded file /var/cache/common-lisp-controller/0/clisp/common-lisp-controller/post-sysdef-install.fas
> ;; Loaded file /usr/lib/clisp-2.44.1/install-clc.lisp
> ;; Wrote the memory image into /usr/lib/clisp-2.44.1/full/lispinit.mem (5,488,408 bytes)
> created /usr/lib/clisp-2.44.1/full/lispinit.mem as expected.
> -rw-r--r-- 1 root root 5488408 Dec 11 13:56 /usr/lib/clisp-2.44.1/full/lispinit.mem
> Setting up binfmt-support (1.2.11) ...
> update-binfmts: warning: Couldn't load the binfmt_misc module.
> Setting up cl-ppcre (1.3.2-2) ...
> Setting up sbcl (1:1.0.18.0-2) ...
> update-binfmts: warning: Couldn't load the binfmt_misc module.
> /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V5 in DEFUN
> STYLE-WARNING: redefining COMPILE-COMMON-LISP-CONTROLLER-V5 in DEFUN
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V4 in DEFUN
> STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER in DEFUN
> ; loading system definition from /usr/lib/sbcl/sb-grovel/sb-grovel.asd into
> ; #<PACKAGE "ASDF1">
> ; registering #<SYSTEM SB-GROVEL {1002C9FB41}> as SB-GROVEL
>
> [undoing binding stack and other enclosing state... done]
> [saving current Lisp image into /usr/lib/sbcl/sbcl-new.core:
> writing 6224 bytes from the read-only space at 0x20000000
> writing 3872 bytes from the static space at 0x20100000
> writing 40275968 bytes from the dynamic space at 0x1000000000
> done]
> Setting up stumpwm (1:20080721-2) ...
> -- Upgrading distribution: FAILED
> ## Updating /etc/apt/sources.list...
> ## Running apt-get update...
> Get:1 http://localhost squeeze Release.gpg [835B]
> Get:2 http://localhost squeeze Release [89.9kB]
> Get:3 http://localhost squeeze/main Packages [8633kB]
> Fetched 8723kB in 3s (2276kB/s)
> Reading package lists...
> ## Running apt-get -y upgrade...
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Entering ResolveByKeep
> Keeping package dpkg
> Keeping package debianutils
> Keeping package util-linux
> Keeping package sed
> Keeping package bash
> Keeping package e2fsprogs
> Keeping package findutils
> Keeping package grep
> Keeping package diff
> Keeping package libc6
> Keeping package libpam-modules
> Keeping package sysv-rc
> Keeping package libpam-runtime
> Keeping package libgcc1
> Package libgcc1 has broken dep on gcc-4.3-base
> Keeping Package gcc-4.3-base due to dep
> Keeping package libstdc++6
> Keeping package gnupg
> Keeping package perl
> Package perl has broken dep on perl-base
> Keeping Package perl-base due to dep
> Keeping package gpgv
> Keeping package libgdbm3
> Keeping package liblocale-gettext-perl
> Keeping package perl-modules
> Keeping package common-lisp-controller
> Keeping package readline-common
> Keeping package libxcb1
> Keeping package libx11-6
> Keeping package cl-asdf
> Keeping package apt-utils
> Package apt-utils has broken dep on libapt-pkg-libc6.7-6-4.6
> Keeping Package apt due to dep
> Keeping package clisp
> Keeping package stumpwm
> Keeping package sbcl
> Keeping package nvi
> The following packages have been kept back:
> apt apt-utils bash cl-asdf clisp common-lisp-controller debianutils diff
> dpkg e2fsprogs findutils gcc-4.3-base gnupg gpgv grep libc6 libgcc1 libgdbm3
> liblocale-gettext-perl libpam-modules libpam-runtime libstdc++6 libx11-6
> libxcb1 nvi perl perl-base perl-modules readline-common sbcl sed stumpwm
> sysv-rc util-linux
> The following packages will be upgraded:
> base-files base-passwd binfmt-support bsdutils cl-ppcre coreutils debconf
> debconf-i18n debfoster debian-archive-keyring e2fslibs gzip hostname
> ifupdown initscripts less libacl1 libattr1 libblkid1 libbz2-1.0 libcomerr2
> libdb4.6 libffcall1 libgc1c2 libncurses5 libncursesw5 libpam0g libreadline5
> libselinux1 libsepol1 libsigsegv0 libslang2 libss2 libtext-charwidth-perl
> libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 libx11-data
> libxau6 libxdmcp6 libxext6 libxpm4 login lsb-base mawk mktemp mount
> ncurses-base ncurses-bin net-tools netbase passwd realpath sysvinit
> sysvinit-utils tar tzdata x11-common zlib1g
> 60 upgraded, 0 newly installed, 0 to remove and 34 not upgraded.
> Need to get 15.0MB of archives.
> After this operation, 2567kB of additional disk space will be used.
> Get:1 http://localhost squeeze/main base-files 5.10 [68.6kB]
> Get:2 http://localhost squeeze/main coreutils 8.5-1 [5102kB]
> Get:3 http://localhost squeeze/main gzip 1.3.12-9 [108kB]
> Get:4 http://localhost squeeze/main hostname 3.04 [15.7kB]
> Get:5 http://localhost squeeze/main login 1:4.1.4.2+svn3283-2 [783kB]
> Get:6 http://localhost squeeze/main libtext-iconv-perl 1.7-2 [18.5kB]
> Get:7 http://localhost squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB]
> Get:8 http://localhost squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B]
> Get:9 http://localhost squeeze/main debconf-i18n 1.5.36 [208kB]
> Get:10 http://localhost squeeze/main debconf 1.5.36 [164kB]
> Get:11 http://localhost squeeze/main libpam0g 1.1.1-6.1 [118kB]
> Get:12 http://localhost squeeze/main libselinux1 2.0.96-1 [88.3kB]
> Get:13 http://localhost squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB]
> Get:14 http://localhost squeeze/main libuuid1 2.17.2-3.3 [58.6kB]
> Get:15 http://localhost squeeze/main libblkid1 2.17.2-3.3 [108kB]
> Get:16 http://localhost squeeze/main mount 2.17.2-3.3 [177kB]
> Get:17 http://localhost squeeze/main libncurses5 5.7+20100313-4 [365kB]
> Get:18 http://localhost squeeze/main ncurses-bin 5.7+20100313-4 [320kB]
> Get:19 http://localhost squeeze/main sysvinit-utils 2.88dsf-13 [121kB]
> Get:20 http://localhost squeeze/main libsepol1 2.0.41-1 [132kB]
> Get:21 http://localhost squeeze/main sysvinit 2.88dsf-13 [119kB]
> Get:22 http://localhost squeeze/main tar 1.23-3 [931kB]
> Get:23 http://localhost squeeze/main mktemp 8.5-1 [14.8kB]
> Get:24 http://localhost squeeze/main base-passwd 3.5.22 [41.9kB]
> Get:25 http://localhost squeeze/main bsdutils 1:2.17.2-3.3 [79.5kB]
> Get:26 http://localhost squeeze/main ncurses-base 5.7+20100313-4 [187kB]
> Get:27 http://localhost squeeze/main mawk 1.3.3-15 [90.1kB]
> Get:28 http://localhost squeeze/main debian-archive-keyring 2010.08.28 [19.9kB]
> Get:29 http://localhost squeeze/main libbz2-1.0 1.0.5-6 [46.4kB]
> Get:30 http://localhost squeeze/main libslang2 2.2.2-4 [546kB]
> Get:31 http://localhost squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB]
> Get:32 http://localhost squeeze/main e2fslibs 1.41.12-2 [144kB]
> Get:33 http://localhost squeeze/main lsb-base 3.2-23.1 [20.5kB]
> Get:34 http://localhost squeeze/main initscripts 2.88dsf-13 [70.0kB]
> Get:35 http://localhost squeeze/main libattr1 1:2.4.44-2 [12.8kB]
> Get:36 http://localhost squeeze/main libacl1 2.2.49-4 [28.3kB]
> Get:37 http://localhost squeeze/main libcomerr2 1.41.12-2 [49.2kB]
> Get:38 http://localhost squeeze/main libss2 1.41.12-2 [54.3kB]
> Get:39 http://localhost squeeze/main tzdata 2010o-1 [764kB]
> Get:40 http://localhost squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB]
> Get:41 http://localhost squeeze/main libdb4.6 4.6.21-16 [600kB]
> Get:42 http://localhost squeeze/main libreadline5 5.2-7 [146kB]
> Get:43 http://localhost squeeze/main net-tools 1.60-23 [337kB]
> Get:44 http://localhost squeeze/main ifupdown 0.6.10 [49.4kB]
> Get:45 http://localhost squeeze/main libncursesw5 5.7+20100313-4 [389kB]
> Get:46 http://localhost squeeze/main netbase 4.43 [20.5kB]
> Get:47 http://localhost squeeze/main less 436-1 [127kB]
> Get:48 http://localhost squeeze/main libgc1c2 1:6.8-1.2 [126kB]
> Get:49 http://localhost squeeze/main binfmt-support 1.2.18 [23.1kB]
> Get:50 http://localhost squeeze/main cl-ppcre 2.0.1-2 [102kB]
> Get:51 http://localhost squeeze/main debfoster 2.7-1.1 [38.2kB]
> Get:52 http://localhost squeeze/main libffcall1 1.10+cvs20100619-2 [13.6kB]
> Get:53 http://localhost squeeze/main libsigsegv0 2.5-3 [21.0kB]
> Get:54 http://localhost squeeze/main libx11-data 2:1.3.3-4 [190kB]
> Get:55 http://localhost squeeze/main libxau6 1:1.0.6-1 [16.8kB]
> Get:56 http://localhost squeeze/main libxdmcp6 1:1.0.3-2 [19.3kB]
> Get:57 http://localhost squeeze/main libxext6 2:1.1.2-1 [45.3kB]
> Get:58 http://localhost squeeze/main libxpm4 1:3.5.8-1 [44.2kB]
> Get:59 http://localhost squeeze/main realpath 1.15 [16.2kB]
> Get:60 http://localhost squeeze/main x11-common 1:7.5+8 [274kB]
> Extracting templates from packages: 50%
Extracting templates from packages: 100%
> Preconfiguring packages ...
> Fetched 15.0MB in 1s (14.4MB/s)
> (Reading database ... 8043 files and directories currently installed.)
> Preparing to replace base-files 5lenny8 (using .../base-files_5.10_amd64.deb) ...
> Unpacking replacement base-files ...
> Replacing files in old package dpkg ...
> Setting up base-files (5.10) ...
> Installing new version of config file /etc/debian_version ...
> Installing new version of config file /etc/issue ...
> Installing new version of config file /etc/issue.net ...
> (Reading database ... 8045 files and directories currently installed.)
> Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ...
> Unpacking replacement coreutils ...
> Replacing files in old package mktemp ...
> Setting up coreutils (8.5-1) ...
> (Reading database ... 8069 files and directories currently installed.)
> Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ...
> Unpacking replacement gzip ...
> Setting up gzip (1.3.12-9) ...
> (Reading database ... 8069 files and directories currently installed.)
> Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ...
> Unpacking replacement hostname ...
> Setting up hostname (3.04) ...
> (Reading database ... 8075 files and directories currently installed.)
> Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ...
> Unpacking replacement login ...
> Setting up login (1:4.1.4.2+svn3283-2) ...
> Installing new version of config file /etc/securetty ...
> Installing new version of config file /etc/pam.d/login ...
> Installing new version of config file /etc/login.defs ...
> (Reading database ... 8074 files and directories currently installed.)
> Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ...
> Unpacking replacement libtext-iconv-perl ...
> Setting up libtext-iconv-perl (1.7-2) ...
> (Reading database ... 8075 files and directories currently installed.)
> Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ...
> Unpacking replacement libtext-charwidth-perl ...
> Setting up libtext-charwidth-perl (0.04-6) ...
> (Reading database ... 8075 files and directories currently installed.)
> Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ...
> Unpacking replacement libtext-wrapi18n-perl ...
> Setting up libtext-wrapi18n-perl (0.06-7) ...
> (Reading database ... 8075 files and directories currently installed.)
> Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ...
> Unpacking replacement debconf-i18n ...
> Setting up debconf-i18n (1.5.36) ...
> (Reading database ... 8094 files and directories currently installed.)
> Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ...
> Unpacking replacement debconf ...
> Setting up debconf (1.5.36) ...
> (Reading database ... 8098 files and directories currently installed.)
> Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ...
> Unpacking replacement libpam0g ...
> Setting up libpam0g (1.1.1-6.1) ...
> Checking for services that may need to be restarted...Checking init scripts...
> Nothing to restart.
> (Reading database ... 8098 files and directories currently installed.)
> Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ...
> Unpacking replacement libselinux1 ...
> Setting up libselinux1 (2.0.96-1) ...
> (Reading database ... 8098 files and directories currently installed.)
> Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ...
> Unpacking replacement passwd ...
> Setting up passwd (1:4.1.4.2+svn3283-2) ...
> (Reading database ... 8092 files and directories currently installed.)
> Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-3.3_amd64.deb) ...
> Unpacking replacement libuuid1 ...
> Setting up libuuid1 (2.17.2-3.3) ...
> (Reading database ... 8092 files and directories currently installed.)
> Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-3.3_amd64.deb) ...
> Unpacking replacement libblkid1 ...
> Setting up libblkid1 (2.17.2-3.3) ...
> (Reading database ... 8093 files and directories currently installed.)
> Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-3.3_amd64.deb) ...
> Unpacking replacement mount ...
> Setting up mount (2.17.2-3.3) ...
> (Reading database ... 8094 files and directories currently installed.)
> Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ...
> Unpacking replacement libncurses5 ...
> Setting up libncurses5 (5.7+20100313-4) ...
> (Reading database ... 8094 files and directories currently installed.)
> Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ...
> Unpacking replacement ncurses-bin ...
> Setting up ncurses-bin (5.7+20100313-4) ...
> (Reading database ... 8096 files and directories currently installed.)
> Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13_amd64.deb) ...
> Unpacking replacement sysvinit-utils ...
> Replacing files in old package sysvinit ...
> Setting up sysvinit-utils (2.88dsf-13) ...
> (Reading database ... 8100 files and directories currently installed.)
> Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ...
> Unpacking replacement libsepol1 ...
> Setting up libsepol1 (2.0.41-1) ...
> (Reading database ... 8100 files and directories currently installed.)
> Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13_amd64.deb) ...
> Unpacking replacement sysvinit ...
> Setting up sysvinit (2.88dsf-13) ...
> (Reading database ... 8101 files and directories currently installed.)
> Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ...
> Unpacking replacement tar ...
> Setting up tar (1.23-3) ...
> (Reading database ... 8101 files and directories currently installed.)
> Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ...
> Unpacking replacement mktemp ...
> Setting up mktemp (8.5-1) ...
> (Reading database ... 8101 files and directories currently installed.)
> Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ...
> Unpacking replacement base-passwd ...
> Setting up base-passwd (3.5.22) ...
> (Reading database ... 8101 files and directories currently installed.)
> Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-3.3_amd64.deb) ...
> Unpacking replacement bsdutils ...
> Setting up bsdutils (1:2.17.2-3.3) ...
> (Reading database ... 8102 files and directories currently installed.)
> Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ...
> Unpacking replacement ncurses-base ...
> Setting up ncurses-base (5.7+20100313-4) ...
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ...
> Unpacking replacement mawk ...
> Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ...
> Unpacking replacement debian-archive-keyring ...
> Setting up debian-archive-keyring (2010.08.28) ...
> gpg: key F42584E6: "Lenny Stable Release Key <debian-release at lists.debian.org>" not changed
> gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster at debian.org>" not changed
> gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
> gpg: key B98321F9: "Squeeze Stable Release Key <debian-release at lists.debian.org>" not changed
> gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster at debian.org>" not changed
> gpg: Total number processed: 5
> gpg: unchanged: 5
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ...
> Unpacking replacement libbz2-1.0 ...
> Setting up libbz2-1.0 (1.0.5-6) ...
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ...
> Unpacking replacement libslang2 ...
> Setting up libslang2 (2.2.2-4) ...
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ...
> Unpacking replacement libusb-0.1-4 ...
> Setting up libusb-0.1-4 (2:0.1.12-16) ...
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ...
> Unpacking replacement e2fslibs ...
> Setting up e2fslibs (1.41.12-2) ...
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ...
> Unpacking replacement lsb-base ...
> Setting up lsb-base (3.2-23.1) ...
> (Reading database ... 8052 files and directories currently installed.)
> Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13_amd64.deb) ...
> Unpacking replacement initscripts ...
> Setting up initscripts (2.88dsf-13) ...
> Installing new version of config file /etc/init.d/bootlogd ...
> Installing new version of config file /etc/init.d/stop-bootlogd ...
> Installing new version of config file /etc/init.d/stop-bootlogd-single ...
> Installing new version of config file /etc/init.d/bootmisc.sh ...
> Installing new version of config file /etc/init.d/checkfs.sh ...
> Installing new version of config file /etc/init.d/checkroot.sh ...
> Installing new version of config file /etc/init.d/hostname.sh ...
> Installing new version of config file /etc/init.d/killprocs ...
> Installing new version of config file /etc/init.d/mountall.sh ...
> Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ...
> Installing new version of config file /etc/init.d/mountoverflowtmp ...
> Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
> Installing new version of config file /etc/init.d/mountkernfs.sh ...
> Installing new version of config file /etc/init.d/mtab.sh ...
> Installing new version of config file /etc/init.d/rc.local ...
> Installing new version of config file /etc/init.d/rmnologin ...
> Installing new version of config file /etc/init.d/sendsigs ...
> Installing new version of config file /etc/init.d/umountfs ...
> Installing new version of config file /etc/init.d/umountnfs.sh ...
> Installing new version of config file /etc/init.d/urandom ...
> Installing new version of config file /etc/network/if-up.d/mountnfs ...
> (Reading database ... 8055 files and directories currently installed.)
> Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ...
> Unpacking replacement libattr1 ...
> Setting up libattr1 (1:2.4.44-2) ...
> (Reading database ... 8055 files and directories currently installed.)
> Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ...
> Unpacking replacement libacl1 ...
> Setting up libacl1 (2.2.49-4) ...
> (Reading database ... 8056 files and directories currently installed.)
> Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ...
> Unpacking replacement libcomerr2 ...
> Setting up libcomerr2 (1.41.12-2) ...
> (Reading database ... 8056 files and directories currently installed.)
> Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ...
> Unpacking replacement libss2 ...
> Setting up libss2 (1.41.12-2) ...
> (Reading database ... 8056 files and directories currently installed.)
> Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ...
> Unpacking replacement tzdata ...
> Setting up tzdata (2010o-1) ...
>
> Current default time zone: 'Etc/UTC'
> Local time is now: Sat Dec 11 13:58:37 UTC 2010.
> Universal Time is now: Sat Dec 11 13:58:37 UTC 2010.
> Run 'dpkg-reconfigure tzdata' if you wish to change it.
>
> (Reading database ... 8059 files and directories currently installed.)
> Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ...
> Unpacking replacement zlib1g ...
> Setting up zlib1g (1:1.2.3.4.dfsg-3) ...
> (Reading database ... 8059 files and directories currently installed.)
> Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ...
> Unpacking replacement libdb4.6 ...
> Setting up libdb4.6 (4.6.21-16) ...
> (Reading database ... 8059 files and directories currently installed.)
> Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ...
> Unpacking replacement libreadline5 ...
> Setting up libreadline5 (5.2-7) ...
> (Reading database ... 8059 files and directories currently installed.)
> Preparing to replace net-tools 1.60-22 (using .../net-tools_1.60-23_amd64.deb) ...
> Unpacking replacement net-tools ...
> Preparing to replace ifupdown 0.6.8+nmu1 (using .../ifupdown_0.6.10_amd64.deb) ...
> Unpacking replacement ifupdown ...
> Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20100313-4_amd64.deb) ...
> Unpacking replacement libncursesw5 ...
> Preparing to replace netbase 4.34 (using .../archives/netbase_4.43_all.deb) ...
> Unpacking replacement netbase ...
> Preparing to replace less 418-1 (using .../archives/less_436-1_amd64.deb) ...
> Unpacking replacement less ...
> Preparing to replace libgc1c2 1:6.8-1.1 (using .../libgc1c2_1%3a6.8-1.2_amd64.deb) ...
> Unpacking replacement libgc1c2 ...
> Preparing to replace binfmt-support 1.2.11 (using .../binfmt-support_1.2.18_all.deb) ...
> Unpacking replacement binfmt-support ...
> Preparing to replace cl-ppcre 1.3.2-2 (using .../cl-ppcre_2.0.1-2_all.deb) ...
> Unpacking replacement cl-ppcre ...
> Preparing to replace debfoster 2.7-1 (using .../debfoster_2.7-1.1_amd64.deb) ...
> Unpacking replacement debfoster ...
> Preparing to replace libffcall1 1.10+2.41-3 (using .../libffcall1_1.10+cvs20100619-2_amd64.deb) ...
> Unpacking replacement libffcall1 ...
> Preparing to replace libsigsegv0 2.5-2 (using .../libsigsegv0_2.5-3_amd64.deb) ...
> Unpacking replacement libsigsegv0 ...
> Preparing to replace libx11-data 2:1.1.5-2 (using .../libx11-data_2%3a1.3.3-4_all.deb) ...
> Unpacking replacement libx11-data ...
> Preparing to replace libxau6 1:1.0.3-3 (using .../libxau6_1%3a1.0.6-1_amd64.deb) ...
> Unpacking replacement libxau6 ...
> Preparing to replace libxdmcp6 1:1.0.2-3 (using .../libxdmcp6_1%3a1.0.3-2_amd64.deb) ...
> Unpacking replacement libxdmcp6 ...
> Preparing to replace libxext6 2:1.0.4-2 (using .../libxext6_2%3a1.1.2-1_amd64.deb) ...
> Unpacking replacement libxext6 ...
> Preparing to replace libxpm4 1:3.5.7-1 (using .../libxpm4_1%3a3.5.8-1_amd64.deb) ...
> Unpacking replacement libxpm4 ...
> Preparing to replace realpath 1.12 (using .../realpath_1.15_amd64.deb) ...
> Unpacking replacement realpath ...
> Preparing to replace x11-common 1:7.3+20 (using .../x11-common_1%3a7.5+8_all.deb) ...
> Unpacking replacement x11-common ...
> Setting up mawk (1.3.3-15) ...
> Setting up net-tools (1.60-23) ...
> Setting up ifupdown (0.6.10) ...
> Installing new version of config file /etc/init.d/ifupdown-clean ...
> ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
> ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
> Setting up libncursesw5 (5.7+20100313-4) ...
> Setting up netbase (4.43) ...
> Installing new version of config file /etc/services ...
> Installing new version of config file /etc/protocols ...
> Installing new version of config file /etc/init.d/networking ...
> Setting up less (436-1) ...
> Setting up libgc1c2 (1:6.8-1.2) ...
> Setting up binfmt-support (1.2.18) ...
> Installing new version of config file /etc/init.d/binfmt-support ...
> update-binfmts: warning: Couldn't load the binfmt_misc module.
> Setting up cl-ppcre (2.0.1-2) ...
> Setting up debfoster (2.7-1.1) ...
> Setting up libffcall1 (1.10+cvs20100619-2) ...
> Setting up libsigsegv0 (2.5-3) ...
> Setting up libx11-data (2:1.3.3-4) ...
> Setting up libxau6 (1:1.0.6-1) ...
> Setting up libxdmcp6 (1:1.0.3-2) ...
> Setting up libxext6 (2:1.1.2-1) ...
> Setting up libxpm4 (1:3.5.8-1) ...
> Setting up realpath (1.15) ...
> Setting up x11-common (1:7.5+8) ...
> Installing new version of config file /etc/X11/Xsession.d/20x11-common_process-args ...
> Installing new version of config file /etc/X11/Xsession.d/90x11-common_ssh-agent ...
> Installing new version of config file /etc/X11/Xsession.d/30x11-common_xresources ...
> Installing new version of config file /etc/X11/Xsession.d/50x11-common_determine-startup ...
> Installing new version of config file /etc/init.d/x11-common ...
> ## Running apt-get -y dist-upgrade...
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Starting
> Starting 2
> Investigating libxcb1
> Package libxcb1 has broken dep on libxcb-xlib0
> Considering libxcb-xlib0 -1 as a solution to libxcb1 6
> Added libxcb-xlib0 to the remove list
> Fixing libxcb1 via remove of libxcb-xlib0
> Done
> The following packages will be REMOVED:
> libxcb-xlib0
> The following NEW packages will be installed:
> adduser ca-certificates dash diffutils gcc-4.4-base gnupg-curl insserv
> libc-bin libcurl3-gnutls libdb4.7 libdb4.8 libgcrypt11 libgnutls26
> libgpg-error0 libgssapi-krb5-2 libidn11 libk5crypto3 libkeyutils1 libkrb5-3
> libkrb5support0 libldap-2.4-2 liblzma2 libreadline6 libsasl2-2
> libsasl2-modules libssl0.9.8 libtasn1-3 openssl sensible-utils xz-utils
> The following packages will be upgraded:
> apt apt-utils bash cl-asdf clisp common-lisp-controller debianutils diff
> dpkg e2fsprogs findutils gcc-4.3-base gnupg gpgv grep libc6 libgcc1 libgdbm3
> liblocale-gettext-perl libpam-modules libpam-runtime libstdc++6 libx11-6
> libxcb1 nvi perl perl-base perl-modules readline-common sbcl sed stumpwm
> sysv-rc util-linux
> 34 upgraded, 30 newly installed, 1 to remove and 0 not upgraded.
> Need to get 51.4MB of archives.
> After this operation, 33.9MB of additional disk space will be used.
> Get:1 http://localhost squeeze/main libc-bin 2.11.2-7 [746kB]
> Get:2 http://localhost squeeze/main libc6 2.11.2-7 [4273kB]
> Get:3 http://localhost squeeze/main gcc-4.4-base 4.4.5-8 [123kB]
> Get:4 http://localhost squeeze/main libgcc1 1:4.4.5-8 [45.0kB]
> Get:5 http://localhost squeeze/main libx11-6 2:1.3.3-4 [846kB]
> Get:6 http://localhost squeeze/main libxcb1 1.6-1 [44.3kB]
> Get:7 http://localhost squeeze/main liblzma2 5.0.0-2 [184kB]
> Get:8 http://localhost squeeze/main xz-utils 5.0.0-2 [201kB]
> Get:9 http://localhost squeeze/main dpkg 1.15.8.5 [2255kB]
> Get:10 http://localhost squeeze/main sensible-utils 0.0.4 [5408B]
> Get:11 http://localhost squeeze/main debianutils 3.4 [49.9kB]
> Get:12 http://localhost squeeze/main dash 0.5.5.1-7.3 [108kB]
> Get:13 http://localhost squeeze/main bash 4.1-3 [1325kB]
> Get:14 http://localhost squeeze/main diffutils 1:3.0-1 [361kB]
> Get:15 http://localhost squeeze/main util-linux 2.17.2-3.3 [729kB]
> Get:16 http://localhost squeeze/main e2fsprogs 1.41.12-2 [817kB]
> Get:17 http://localhost squeeze/main findutils 4.4.2-1+b1 [689kB]
> Get:18 http://localhost squeeze/main grep 2.6.3-3 [308kB]
> Get:19 http://localhost squeeze/main perl-modules 5.10.1-16 [3481kB]
> Get:20 http://localhost squeeze/main libdb4.7 4.7.25-9 [662kB]
> Get:21 http://localhost squeeze/main libgdbm3 1.8.3-9 [46.2kB]
> Get:22 http://localhost squeeze/main perl 5.10.1-16 [4461kB]
> Get:23 http://localhost squeeze/main perl-base 5.10.1-16 [1066kB]
> Get:24 http://localhost squeeze/main sed 4.2.1-7 [251kB]
> Get:25 http://localhost squeeze/main diff 1:3.0-1 [6490B]
> Get:26 http://localhost squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB]
> Get:27 http://localhost squeeze/main libdb4.8 4.8.30-2 [696kB]
> Get:28 http://localhost squeeze/main libpam-modules 1.1.1-6.1 [360kB]
> Get:29 http://localhost squeeze/main cl-asdf 2:2.004-1 [503kB]
> Get:30 http://localhost squeeze/main sbcl 1:1.0.40.0-2 [10.6MB]
> Get:31 http://localhost squeeze/main common-lisp-controller 7.4+nmu1 [35.0kB]
> Get:32 http://localhost squeeze/main clisp 1:2.48-3 [4723kB]
> Get:33 http://localhost squeeze/main adduser 3.112+nmu2 [250kB]
> Get:34 http://localhost squeeze/main libstdc++6 4.4.5-8 [341kB]
> Get:35 http://localhost squeeze/main apt-utils 0.8.8 [271kB]
> Get:36 http://localhost squeeze/main readline-common 6.1-3 [54.0kB]
> Get:37 http://localhost squeeze/main libreadline6 6.1-3 [161kB]
> Get:38 http://localhost squeeze/main gpgv 1.4.10-4 [221kB]
> Get:39 http://localhost squeeze/main gnupg 1.4.10-4 [2148kB]
> Get:40 http://localhost squeeze/main apt 0.8.8 [2145kB]
> Get:41 http://localhost squeeze/main libpam-runtime 1.1.1-6.1 [223kB]
> Get:42 http://localhost squeeze/main insserv 1.14.0-2 [71.0kB]
> Get:43 http://localhost squeeze/main sysv-rc 2.88dsf-13 [73.8kB]
> Get:44 http://localhost squeeze/main libssl0.9.8 0.9.8o-3 [997kB]
> Get:45 http://localhost squeeze/main libgpg-error0 1.6-1 [43.9kB]
> Get:46 http://localhost squeeze/main libgcrypt11 1.4.5-2 [282kB]
> Get:47 http://localhost squeeze/main libtasn1-3 2.7-1 [63.1kB]
> Get:48 http://localhost squeeze/main libgnutls26 2.8.6-1 [559kB]
> Get:49 http://localhost squeeze/main libkeyutils1 1.4-1 [6942B]
> Get:50 http://localhost squeeze/main libkrb5support0 1.8.3+dfsg-3 [45.6kB]
> Get:51 http://localhost squeeze/main libk5crypto3 1.8.3+dfsg-3 [106kB]
> Get:52 http://localhost squeeze/main libkrb5-3 1.8.3+dfsg-3 [375kB]
> Get:53 http://localhost squeeze/main libgssapi-krb5-2 1.8.3+dfsg-3 [130kB]
> Get:54 http://localhost squeeze/main libidn11 1.15-2 [158kB]
> Get:55 http://localhost squeeze/main libsasl2-2 2.1.23.dfsg1-6 [115kB]
> Get:56 http://localhost squeeze/main libldap-2.4-2 2.4.23-7 [211kB]
> Get:57 http://localhost squeeze/main openssl 0.9.8o-3 [1059kB]
> Get:58 http://localhost squeeze/main ca-certificates 20090814+nmu2 [153kB]
> Get:59 http://localhost squeeze/main gcc-4.3-base 4.3.5-4 [110kB]
> Get:60 http://localhost squeeze/main libcurl3-gnutls 7.21.0-1 [266kB]
> Get:61 http://localhost squeeze/main gnupg-curl 1.4.10-4 [74.6kB]
> Get:62 http://localhost squeeze/main libsasl2-modules 2.1.23.dfsg1-6 [155kB]
> Get:63 http://localhost squeeze/main nvi 1.81.6-8.1 [278kB]
> Get:64 http://localhost squeeze/main stumpwm 1:20090804.git9d6cb388-1 [308kB]
> Extracting templates from packages: 46%
Extracting templates from packages: 93%
Extracting templates from packages: 100%
> Preconfiguring packages ...
> Fetched 51.4MB in 1s (39.6MB/s)
> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBC-BIN.
> DPKG: CONSIDERING DECONFIGURATION OF LIBC6, WHICH WOULD BE BROKEN BY INSTALLATION OF LIBC-BIN ...
> DPKG: YES, WILL DECONFIGURE LIBC6 (BROKEN BY LIBC-BIN).
> (READING DATABASE ... 8107 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING LIBC-BIN (FROM .../LIBC-BIN_2.11.2-7_AMD64.DEB) ...
> DE-CONFIGURING LIBC6 ...
> REPLACING FILES IN OLD PACKAGE LIBC6 ...
> SETTING UP LIBC-BIN (2.11.2-7) ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/GAI.CONF ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/BINDRESVPORT.BLACKLIST ...
> (READING DATABASE ... 8113 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE LIBC6 2.7-18LENNY6 (USING .../LIBC6_2.11.2-7_AMD64.DEB) ...
> REMOVING OBSOLETE CONFFILE /ETC/INIT.D/GLIBC.SH ...
> CHECKING FOR SERVICES THAT MAY NEED TO BE RESTARTED...
> CHECKING INIT SCRIPTS...
> UNPACKING REPLACEMENT LIBC6 ...
> SETTING UP LIBC6 (2.11.2-7) ...
> CHECKING FOR SERVICES THAT MAY NEED TO BE RESTARTED...
> CHECKING INIT SCRIPTS...
> NOTHING TO RESTART.
> SELECTING PREVIOUSLY DESELECTED PACKAGE GCC-4.4-BASE.
> (READING DATABASE ... 8108 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING GCC-4.4-BASE (FROM .../GCC-4.4-BASE_4.4.5-8_AMD64.DEB) ...
> SETTING UP GCC-4.4-BASE (4.4.5-8) ...
> (READING DATABASE ... 8116 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE LIBGCC1 1:4.3.2-1.1 (USING .../LIBGCC1_1%3A4.4.5-8_AMD64.DEB) ...
> UNPACKING REPLACEMENT LIBGCC1 ...
> SETTING UP LIBGCC1 (1:4.4.5-8) ...
> (READING DATABASE ... 8116 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE LIBX11-6 2:1.1.5-2 (USING .../LIBX11-6_2%3A1.3.3-4_AMD64.DEB) ...
> UNPACKING REPLACEMENT LIBX11-6 ...
> (READING DATABASE ... 8116 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> REMOVING LIBXCB-XLIB0 ...
> (READING DATABASE ... 8109 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE LIBXCB1 1.1-1.2 (USING .../LIBXCB1_1.6-1_AMD64.DEB) ...
> UNPACKING REPLACEMENT LIBXCB1 ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBLZMA2.
> UNPACKING LIBLZMA2 (FROM .../LIBLZMA2_5.0.0-2_AMD64.DEB) ...
> SETTING UP LIBLZMA2 (5.0.0-2) ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE XZ-UTILS.
> (READING DATABASE ... 8117 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING XZ-UTILS (FROM .../XZ-UTILS_5.0.0-2_AMD64.DEB) ...
> SETTING UP XZ-UTILS (5.0.0-2) ...
> (READING DATABASE ... 8159 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE DPKG 1.14.30 (USING .../DPKG_1.15.8.5_AMD64.DEB) ...
> UNPACKING REPLACEMENT DPKG ...
> SETTING UP DPKG (1.15.8.5) ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/LOGROTATE.D/DPKG ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE SENSIBLE-UTILS.
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8163 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING SENSIBLE-UTILS (FROM .../SENSIBLE-UTILS_0.0.4_ALL.DEB) ...
> REPLACING FILES IN OLD PACKAGE DEBIANUTILS ...
> SETTING UP SENSIBLE-UTILS (0.0.4) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8170 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE DEBIANUTILS 2.30 (USING .../DEBIANUTILS_3.4_AMD64.DEB) ...
> UNPACKING REPLACEMENT DEBIANUTILS ...
> SETTING UP DEBIANUTILS (3.4) ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE DASH.
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8166 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING DASH (FROM .../DASH_0.5.5.1-7.3_AMD64.DEB) ...
> ADDING 'DIVERSION OF /BIN/SH TO /BIN/SH.DISTRIB BY DASH'
> ADDING 'DIVERSION OF /USR/SHARE/MAN/MAN1/SH.1.GZ TO /USR/SHARE/MAN/MAN1/SH.DISTRIB.1.GZ BY DASH'
> SETTING UP DASH (0.5.5.1-7.3) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8178 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE BASH 3.2-4 (USING .../ARCHIVES/BASH_4.1-3_AMD64.DEB) ...
> UNPACKING REPLACEMENT BASH ...
> SETTING UP BASH (4.1-3) ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/BASH.BASHRC ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/SKEL/.BASHRC ...
> UPDATE-ALTERNATIVES: USING /USR/SHARE/MAN/MAN7/BASH-BUILTINS.7.GZ TO PROVIDE /USR/SHARE/MAN/MAN7/BUILTINS.7.GZ (BUILTINS.7.GZ) IN AUTO MODE.
> SELECTING PREVIOUSLY DESELECTED PACKAGE DIFFUTILS.
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8201 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING DIFFUTILS (FROM .../DIFFUTILS_1%3A3.0-1_AMD64.DEB) ...
> REPLACING FILES IN OLD PACKAGE DIFF ...
> SETTING UP DIFFUTILS (1:3.0-1) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8223 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE UTIL-LINUX 2.13.1.1-1 (USING .../UTIL-LINUX_2.17.2-3.3_AMD64.DEB) ...
> INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE,
> INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE
> INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE UTIL-LINUX SHOULD BE UPDATED.
> UNPACKING REPLACEMENT UTIL-LINUX ...
> REPLACING FILES IN OLD PACKAGE E2FSPROGS ...
> SETTING UP UTIL-LINUX (2.17.2-3.3) ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/HWCLOCKFIRST.SH ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/HWCLOCK.SH ...
> UPDATE-ALTERNATIVES: USING /BIN/LESS TO PROVIDE /USR/BIN/PAGER (PAGER) IN AUTO MODE.
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8238 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE E2FSPROGS 1.41.3-1 (USING .../E2FSPROGS_1.41.12-2_AMD64.DEB) ...
> UNPACKING REPLACEMENT E2FSPROGS ...
> SETTING UP E2FSPROGS (1.41.12-2) ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/MKE2FS.CONF ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8241 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE FINDUTILS 4.4.0-2 (USING .../FINDUTILS_4.4.2-1+B1_AMD64.DEB) ...
> INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE,
> INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE
> INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE FINDUTILS SHOULD BE UPDATED.
> UNPACKING REPLACEMENT FINDUTILS ...
> SETTING UP FINDUTILS (4.4.2-1+B1) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8243 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE GREP 2.5.3~DFSG-6 (USING .../GREP_2.6.3-3_AMD64.DEB) ...
> UNPACKING REPLACEMENT GREP ...
> SETTING UP GREP (2.6.3-3) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8245 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE PERL-MODULES 5.10.0-19LENNY2 (USING .../PERL-MODULES_5.10.1-16_ALL.DEB) ...
> UNPACKING REPLACEMENT PERL-MODULES ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBDB4.7.
> UNPACKING LIBDB4.7 (FROM .../LIBDB4.7_4.7.25-9_AMD64.DEB) ...
> PREPARING TO REPLACE LIBGDBM3 1.8.3-3 (USING .../LIBGDBM3_1.8.3-9_AMD64.DEB) ...
> UNPACKING REPLACEMENT LIBGDBM3 ...
> PREPARING TO REPLACE PERL 5.10.0-19LENNY2 (USING .../PERL_5.10.1-16_AMD64.DEB) ...
> UNPACKING REPLACEMENT PERL ...
> PREPARING TO REPLACE PERL-BASE 5.10.0-19LENNY2 (USING .../PERL-BASE_5.10.1-16_AMD64.DEB) ...
> UNPACKING REPLACEMENT PERL-BASE ...
> SETTING UP PERL-BASE (5.10.1-16) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8420 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE SED 4.1.5-6 (USING .../ARCHIVES/SED_4.2.1-7_AMD64.DEB) ...
> UNPACKING REPLACEMENT SED ...
> SETTING UP SED (4.2.1-7) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8423 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE DIFF 2.8.1-12 (USING .../DIFF_1%3A3.0-1_ALL.DEB) ...
> UNPACKING REPLACEMENT DIFF ...
> SETTING UP DIFF (1:3.0-1) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8420 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE LIBLOCALE-GETTEXT-PERL 1.05-4 (USING .../LIBLOCALE-GETTEXT-PERL_1.05-6_AMD64.DEB) ...
> UNPACKING REPLACEMENT LIBLOCALE-GETTEXT-PERL ...
> SETTING UP LIBLOCALE-GETTEXT-PERL (1.05-6) ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBDB4.8.
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8420 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> UNPACKING LIBDB4.8 (FROM .../LIBDB4.8_4.8.30-2_AMD64.DEB) ...
> SETTING UP LIBDB4.8 (4.8.30-2) ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8424 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE LIBPAM-MODULES 1.0.1-5+LENNY1 (USING .../LIBPAM-MODULES_1.1.1-6.1_AMD64.DEB) ...
> UNPACKING REPLACEMENT LIBPAM-MODULES ...
> SETTING UP LIBPAM-MODULES (1.1.1-6.1) ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/SECURITY/LIMITS.CONF ...
> INSTALLING NEW VERSION OF CONFIG FILE /ETC/SECURITY/NAMESPACE.INIT ...
> DPKG: COMMON-LISP-CONTROLLER: DEPENDENCY PROBLEMS, BUT REMOVING ANYWAY AS YOU REQUESTED:
> CL-PPCRE DEPENDS ON COMMON-LISP-CONTROLLER (>= 5.11).
> SBCL DEPENDS ON COMMON-LISP-CONTROLLER (>= 5.11).
> CLISP DEPENDS ON COMMON-LISP-CONTROLLER (>= 5.11).
> STUMPWM DEPENDS ON COMMON-LISP-CONTROLLER (>= 5.11).
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8430 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> REMOVING COMMON-LISP-CONTROLLER ...
> (READING DATABASE ...
> (READING DATABASE ... 5%
> (READING DATABASE ... 10%
> (READING DATABASE ... 15%
> (READING DATABASE ... 20%
> (READING DATABASE ... 25%
> (READING DATABASE ... 30%
> (READING DATABASE ... 35%
> (READING DATABASE ... 40%
> (READING DATABASE ... 45%
> (READING DATABASE ... 50%
> (READING DATABASE ... 55%
> (READING DATABASE ... 60%
> (READING DATABASE ... 65%
> (READING DATABASE ... 70%
> (READING DATABASE ... 75%
> (READING DATABASE ... 80%
> (READING DATABASE ... 85%
> (READING DATABASE ... 90%
> (READING DATABASE ... 95%
> (READING DATABASE ... 100%
> (READING DATABASE ... 8406 FILES AND DIRECTORIES CURRENTLY INSTALLED.)
> PREPARING TO REPLACE CL-ASDF 1.111-1 (USING .../CL-ASDF_2%3A2.004-1_ALL.DEB) ...
> UNPACKING REPLACEMENT CL-ASDF ...
> PREPARING TO REPLACE SBCL 1:1.0.18.0-2 (USING .../SBCL_1%3A1.0.40.0-2_AMD64.DEB) ...
> UNPACKING REPLACEMENT SBCL ...
> SELECTING PREVIOUSLY DESELECTED PACKAGE COMMON-LISP-CONTROLLER.
> DPKG: CONSIDERING DECONFIGURATION OF CLISP, WHICH WOULD BE BROKEN BY INSTALLATION OF COMMON-LISP-CONTROLLER ...
> DPKG: YES, WILL DECONFIGURE CLISP (BROKEN BY COMMON-LISP-CONTROLLER).
> UNPACKING COMMON-LISP-CONTROLLER (FROM .../COMMON-LISP-CONTROLLER_7.4+NMU1_ALL.DEB) ...
> DE-CONFIGURING CLISP ...
> /VAR/LIB/DPKG/TMP.CI/PREINST: 68: ADDUSER: NOT FOUND
> DPKG: ERROR PROCESSING /VAR/CACHE/APT/ARCHIVES/COMMON-LISP-CONTROLLER_7.4+NMU1_ALL.DEB (--UNPACK):
> SUBPROCESS NEW PRE-INSTALLATION SCRIPT RETURNED ERROR EXIT STATUS 127
> ERRORS WERE ENCOUNTERED WHILE PROCESSING:
> /VAR/CACHE/APT/ARCHIVES/COMMON-LISP-CONTROLLER_7.4+NMU1_ALL.DEB
> E: Sub-process /usr/bin/dpkg returned an error code (1)
The full build log is available from:
http://people.debian.org/~lucas/logs/2010/12/11/stumpwm.log
It is reproducible by installing your package in a clean chroot, using
the debconf Noninteractive frontend, and priority: critical.
This test was carried out using about 50 AMD64 nodes of the Grid'5000
platform. Internet was not accessible from the nodes.
--
| Lucas Nussbaum
| lucas at lucas-nussbaum.net http://www.lucas-nussbaum.net/ |
| jabber: lucas at nussbaum.fr GPG: 1024D/023B3F4F |
More information about the pkg-common-lisp-devel
mailing list