[pkg-fso-maint] fw_setenv: Cannot malloc -131072 bytes: Cannot allocate memory

Timo Juhani Lindfors timo.lindfors at iki.fi
Thu Feb 12 00:44:57 UTC 2009


Luca Capello <luca at pca.it> writes:
> I packaged that version (available at [2]) and indeed it works.  Timo,
> can you confirm it, please?

$ sudo fw_printenv
Too few good blocks within range

$ cat /etc/fw_env.config
# Configuration file for fw_(printenv/saveenv) utility.

# MTD device name       Device offset   Env. size       Flash sector size
/dev/mtd2               0x0000          00040000        00020000

$ dpkg -l uboot-envtools
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name                                 Version                              Description
+++-====================================-====================================-========================================================================================
ii  uboot-envtools                       20080909-1~gismo.1                   read/modify the environment for the bootloader U-Boot




More information about the pkg-fso-maint mailing list