[pkg-fso-maint] Bug#633065: linux-image-2.6.34-openmoko-gta02: wifi device sometimes does not appear

[Timo Juhani Lindfors]

Package: linux-image-2.6.34-openmoko-gta02
Version: 20101212.git049b71de-2
Severity: normal

Steps to reproduce:
1) om wifi power 1
2) ip link

Expected results:
2) wlan interface is listed. Often named "eth0"

Actual results:
2) wlan interface is not listed.

More info:
1) this bug does not seem to occur always.

2) In the failing case linux prints

  164.510000] s3c-sdi s3c2440-sdi: powered down.
  164.510000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ
  164.520000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
  164.540000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
  164.560000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
  164.560000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
  164.560000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
  164.580000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
  164.580000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
  164.590000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
  164.590000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
  164.610000] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
  164.610000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
  164.610000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
  164.610000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
  164.610000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
  164.610000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
  164.610000] mmc0: new SDIO card at address 0001

and in the working case it prints

68801.590000] s3c-sdi s3c2440-sdi: powered down.
68801.590000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ
68801.590000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
68801.610000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
68801.630000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
68801.630000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
68801.630000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
68801.650000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
68801.650000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
68801.660000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
68801.670000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
68801.680000] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
68801.680000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
68801.680000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
68801.680000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
68801.680000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
68801.680000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
68801.680000] mmc0: new SDIO card at address 0001
68802.710000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
68802.770000] AR6000 Reg Code = 0x40000060
68802.780000] <30>udev[21978]: renamed network interface eth0 to wlan



-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: armel (armv4tl)

Kernel: Linux 2.6.34-20101212.git049b71de
Locale: LANG=C, LC_CTYPE=fi_FI (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.34-openmoko-gta02 depends on:
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

linux-image-2.6.34-openmoko-gta02 recommends no packages.

linux-image-2.6.34-openmoko-gta02 suggests no packages.

-- no debconf information