r17660 - in /desktop/unstable/libgail-gnome/debian: changelog control control.in patches/90_relibtoolize.patch patches/99_ltmain_as-needed.patch patches/series rules
joss at users.alioth.debian.org
joss at users.alioth.debian.org
Fri Nov 21 19:03:26 UTC 2008
Author: joss
Date: Fri Nov 21 19:03:26 2008
New Revision: 17660
URL: http://svn.debian.org/wsvn/pkg-gnome/?sc=1&rev=17660
Log:
* New upstream bugfix release.
* Link with -Wl,-Bsymbolic to avoid encountering bugs similar to the
one fixed upstream.
* Also pass -Wl,-O1 -Wl,-z,defs -Wl,--as-needed.
* 90_relibtoolize.patch: relibtoolize to avoid the amd64 rpath issue.
* 99_ltmain_as-needed.patch: make --as-needed work.
* Standards version is 3.8.0.
* Don’t call dh_makeshlibs.
Added:
desktop/unstable/libgail-gnome/debian/patches/90_relibtoolize.patch
desktop/unstable/libgail-gnome/debian/patches/99_ltmain_as-needed.patch (contents, props changed)
- copied, changed from r17657, desktop/experimental/gnome-desktop/debian/patches/99_ltmain_as-needed.patch
Modified:
desktop/unstable/libgail-gnome/debian/changelog
desktop/unstable/libgail-gnome/debian/control
desktop/unstable/libgail-gnome/debian/control.in
desktop/unstable/libgail-gnome/debian/patches/series
desktop/unstable/libgail-gnome/debian/rules
Modified: desktop/unstable/libgail-gnome/debian/changelog
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/changelog?rev=17660&op=diff
==============================================================================
--- desktop/unstable/libgail-gnome/debian/changelog (original)
+++ desktop/unstable/libgail-gnome/debian/changelog Fri Nov 21 19:03:26 2008
@@ -1,3 +1,16 @@
+libgail-gnome (1.20.1-1) unstable; urgency=low
+
+ * New upstream bugfix release.
+ * Link with -Wl,-Bsymbolic to avoid encountering bugs similar to the
+ one fixed upstream.
+ * Also pass -Wl,-O1 -Wl,-z,defs -Wl,--as-needed.
+ * 90_relibtoolize.patch: relibtoolize to avoid the amd64 rpath issue.
+ * 99_ltmain_as-needed.patch: make --as-needed work.
+ * Standards version is 3.8.0.
+ * Don’t call dh_makeshlibs.
+
+ -- Josselin Mouette <joss at debian.org> Fri, 21 Nov 2008 19:46:18 +0100
+
libgail-gnome (1.20.0-1) unstable; urgency=low
[ Loic Minier ]
Modified: desktop/unstable/libgail-gnome/debian/control
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/control?rev=17660&op=diff
==============================================================================
--- desktop/unstable/libgail-gnome/debian/control (original)
+++ desktop/unstable/libgail-gnome/debian/control Fri Nov 21 19:03:26 2008
@@ -2,7 +2,7 @@
Section: libs
Priority: optional
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers at lists.alioth.debian.org>
-Uploaders: Loic Minier <lool at dooz.org>, Sebastian Dröge <slomo at debian.org>, Sebastien Bacher <seb128 at debian.org>
+Uploaders: Josselin Mouette <joss at debian.org>, Loic Minier <lool at dooz.org>, Sebastian Dröge <slomo at debian.org>, Sebastien Bacher <seb128 at debian.org>
Build-Depends: debhelper (>= 5),
libatk1.0-dev (>= 1.2.0),
libgtk2.0-dev (>= 2.0.6-3),
@@ -17,7 +17,7 @@
libpanel-applet2-dev,
gnome-pkg-tools (>= 0.11),
quilt
-Standards-Version: 3.7.2
+Standards-Version: 3.8.0
Package: libgail-gnome-module
Architecture: any
Modified: desktop/unstable/libgail-gnome/debian/control.in
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/control.in?rev=17660&op=diff
==============================================================================
--- desktop/unstable/libgail-gnome/debian/control.in (original)
+++ desktop/unstable/libgail-gnome/debian/control.in Fri Nov 21 19:03:26 2008
@@ -17,7 +17,7 @@
libpanel-applet2-dev,
gnome-pkg-tools (>= 0.11),
quilt
-Standards-Version: 3.7.2
+Standards-Version: 3.8.0
Package: libgail-gnome-module
Architecture: any
Added: desktop/unstable/libgail-gnome/debian/patches/90_relibtoolize.patch
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/patches/90_relibtoolize.patch?rev=17660&op=file
==============================================================================
--- desktop/unstable/libgail-gnome/debian/patches/90_relibtoolize.patch (added)
+++ desktop/unstable/libgail-gnome/debian/patches/90_relibtoolize.patch Fri Nov 21 19:03:26 2008
@@ -1,0 +1,23134 @@
+libtoolize --force --copy
+aclocal-1.10
+automake-1.10 -acf
+autoconf
+rm -rf autom4te.cache/
+
+Index: libgail-gnome-1.20.1/Makefile.in
+===================================================================
+--- libgail-gnome-1.20.1.orig/Makefile.in 2008-11-21 19:59:51.420842454 +0100
++++ libgail-gnome-1.20.1/Makefile.in 2008-11-21 20:00:39.124340244 +0100
+@@ -212,7 +212,6 @@ sharedstatedir = @sharedstatedir@
+ srcdir = @srcdir@
+ sysconfdir = @sysconfdir@
+ target_alias = @target_alias@
+-top_build_prefix = @top_build_prefix@
+ top_builddir = @top_builddir@
+ top_srcdir = @top_srcdir@
+ SUBDIRS = gail-gnome test
+Index: libgail-gnome-1.20.1/aclocal.m4
+===================================================================
+--- libgail-gnome-1.20.1.orig/aclocal.m4 2008-11-21 19:59:50.260846352 +0100
++++ libgail-gnome-1.20.1/aclocal.m4 2008-11-21 20:00:37.128346480 +0100
+@@ -13,5791 +13,4924 @@
+
+ m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+-m4_if(AC_AUTOCONF_VERSION, [2.62],,
+-[m4_warning([this file was generated for autoconf 2.62.
++m4_if(AC_AUTOCONF_VERSION, [2.61],,
++[m4_warning([this file was generated for autoconf 2.61.
+ You have another version of autoconf. It may work, but is not guaranteed to.
+ If you have problems, you may need to regenerate the build system entirely.
+ To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+-
+-# AM_AUTOMAKE_VERSION(VERSION)
+-# ----------------------------
+-# Automake X.Y traces this macro to ensure aclocal.m4 has been
+-# generated from the m4 files accompanying Automake X.Y.
+-# (This private macro should not be called outside this file.)
+-AC_DEFUN([AM_AUTOMAKE_VERSION],
+-[am__api_version='1.10'
+-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+-dnl require some minimum version. Point them to the right macro.
+-m4_if([$1], [1.10.1], [],
+- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+-])
++# gnome-common.m4
++#
+
+-# _AM_AUTOCONF_VERSION(VERSION)
+-# -----------------------------
+-# aclocal traces this macro to find the Autoconf version.
+-# This is a private macro too. Using m4_define simplifies
+-# the logic in aclocal, which can simply ignore this definition.
+-m4_define([_AM_AUTOCONF_VERSION], [])
++dnl GNOME_COMMON_INIT
+
+-# AM_SET_CURRENT_AUTOMAKE_VERSION
+-# -------------------------------
+-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+-[AM_AUTOMAKE_VERSION([1.10.1])dnl
+-m4_ifndef([AC_AUTOCONF_VERSION],
+- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
++AC_DEFUN([GNOME_COMMON_INIT],
++[
++ dnl this macro should come after AC_CONFIG_MACRO_DIR
++ AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0])
+
+-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
++ dnl ensure that when the Automake generated makefile calls aclocal,
++ dnl it honours the $ACLOCAL_FLAGS environment variable
++ ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}"
++ if test -n "$ac_macro_dir"; then
++ ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS"
++ fi
+
+-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++ AC_SUBST([ACLOCAL_AMFLAGS])
++])
+
+-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+-#
+-# Of course, Automake must honor this variable whenever it calls a
+-# tool from the auxiliary directory. The problem is that $srcdir (and
+-# therefore $ac_aux_dir as well) can be either absolute or relative,
+-# depending on how configure is run. This is pretty annoying, since
+-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+-# source directory, any form will work fine, but in subdirectories a
+-# relative path needs to be adjusted first.
+-#
+-# $ac_aux_dir/missing
+-# fails when called from a subdirectory if $ac_aux_dir is relative
+-# $top_srcdir/$ac_aux_dir/missing
+-# fails if $ac_aux_dir is absolute,
+-# fails when called from a subdirectory in a VPATH build with
+-# a relative $ac_aux_dir
+-#
+-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+-# are both prefixed by $srcdir. In an in-source build this is usually
+-# harmless because $srcdir is `.', but things will broke when you
+-# start a VPATH build or use an absolute $srcdir.
+-#
+-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+-# and then we would define $MISSING as
+-# MISSING="\${SHELL} $am_aux_dir/missing"
+-# This will work as long as MISSING is not called from configure, because
+-# unfortunately $(top_srcdir) has no meaning in configure.
+-# However there are other variables, like CC, which are often used in
+-# configure, and could therefore not use this "fixed" $ac_aux_dir.
+-#
+-# Another solution, used here, is to always expand $ac_aux_dir to an
+-# absolute PATH. The drawback is that using absolute paths prevent a
+-# configured tree to be moved without reconfiguration.
++AC_DEFUN([GNOME_DEBUG_CHECK],
++[
++ AC_ARG_ENABLE([debug],
++ AC_HELP_STRING([--enable-debug],
++ [turn on debugging]),,
++ [enable_debug=no])
+
+-AC_DEFUN([AM_AUX_DIR_EXPAND],
+-[dnl Rely on autoconf to set up CDPATH properly.
+-AC_PREREQ([2.50])dnl
+-# expand $ac_aux_dir to an absolute path
+-am_aux_dir=`cd $ac_aux_dir && pwd`
++ if test x$enable_debug = xyes ; then
++ AC_DEFINE(GNOME_ENABLE_DEBUG, 1,
++ [Enable additional debugging at the expense of performance and size])
++ fi
+ ])
+
+-# AM_CONDITIONAL -*- Autoconf -*-
++dnl GNOME_MAINTAINER_MODE_DEFINES ()
++dnl define DISABLE_DEPRECATED
++dnl
++AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES],
++[
++ AC_REQUIRE([AM_MAINTAINER_MODE])
+
+-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++ if test $USE_MAINTAINER_MODE = yes; then
++ DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED"
++ else
++ DISABLE_DEPRECATED=""
++ fi
++ AC_SUBST(DISABLE_DEPRECATED)
++])
+
+-# serial 8
++dnl GNOME_COMPILE_WARNINGS
++dnl Turn on many useful compiler warnings
++dnl For now, only works on GCC
++AC_DEFUN([GNOME_COMPILE_WARNINGS],[
++ dnl ******************************
++ dnl More compiler warnings
++ dnl ******************************
+
+-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+-# -------------------------------------
+-# Define a conditional.
+-AC_DEFUN([AM_CONDITIONAL],
+-[AC_PREREQ(2.52)dnl
+- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+-AC_SUBST([$1_TRUE])dnl
+-AC_SUBST([$1_FALSE])dnl
+-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+-if $2; then
+- $1_TRUE=
+- $1_FALSE='#'
+-else
+- $1_TRUE='#'
+- $1_FALSE=
+-fi
+-AC_CONFIG_COMMANDS_PRE(
+-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+- AC_MSG_ERROR([[conditional "$1" was never defined.
+-Usually this means the macro was only invoked conditionally.]])
+-fi])])
++ AC_ARG_ENABLE(compile-warnings,
++ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@],
++ [Turn on compiler warnings]),,
++ [enable_compile_warnings="m4_default([$1],[yes])"])
+
+-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++ warnCFLAGS=
++ if test "x$GCC" != xyes; then
++ enable_compile_warnings=no
++ fi
+
+-# serial 9
++ warning_flags=
++ realsave_CFLAGS="$CFLAGS"
+
+-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+-# written in clear, in which case automake, when reading aclocal.m4,
+-# will think it sees a *use*, and therefore will trigger all it's
+-# C support machinery. Also note that it means that autoscan, seeing
+-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++ case "$enable_compile_warnings" in
++ no)
++ warning_flags=
++ ;;
++ minimum)
++ warning_flags="-Wall"
++ ;;
++ yes)
++ warning_flags="-Wall -Wmissing-prototypes"
++ ;;
++ maximum|error)
++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith"
++ CFLAGS="$warning_flags $CFLAGS"
++ for option in -Wno-sign-compare; do
++ SAVE_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS $option"
++ AC_MSG_CHECKING([whether gcc understands $option])
++ AC_TRY_COMPILE([], [],
++ has_option=yes,
++ has_option=no,)
++ CFLAGS="$SAVE_CFLAGS"
++ AC_MSG_RESULT($has_option)
++ if test $has_option = yes; then
++ warning_flags="$warning_flags $option"
++ fi
++ unset has_option
++ unset SAVE_CFLAGS
++ done
++ unset option
++ if test "$enable_compile_warnings" = "error" ; then
++ warning_flags="$warning_flags -Werror"
++ fi
++ ;;
++ *)
++ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings)
++ ;;
++ esac
++ CFLAGS="$realsave_CFLAGS"
++ AC_MSG_CHECKING(what warning flags to pass to the C compiler)
++ AC_MSG_RESULT($warning_flags)
+
++ AC_ARG_ENABLE(iso-c,
++ AC_HELP_STRING([--enable-iso-c],
++ [Try to warn if code is not ISO C ]),,
++ [enable_iso_c=no])
+
+-# _AM_DEPENDENCIES(NAME)
+-# ----------------------
+-# See how the compiler implements dependency checking.
+-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+-# We try a few techniques and use that to set a single cache variable.
+-#
+-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+-# dependency, and given that the user is not expected to run this macro,
+-# just rely on AC_PROG_CC.
+-AC_DEFUN([_AM_DEPENDENCIES],
+-[AC_REQUIRE([AM_SET_DEPDIR])dnl
+-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+-AC_REQUIRE([AM_DEP_TRACK])dnl
++ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler)
++ complCFLAGS=
++ if test "x$enable_iso_c" != "xno"; then
++ if test "x$GCC" = "xyes"; then
++ case " $CFLAGS " in
++ *[\ \ ]-ansi[\ \ ]*) ;;
++ *) complCFLAGS="$complCFLAGS -ansi" ;;
++ esac
++ case " $CFLAGS " in
++ *[\ \ ]-pedantic[\ \ ]*) ;;
++ *) complCFLAGS="$complCFLAGS -pedantic" ;;
++ esac
++ fi
++ fi
++ AC_MSG_RESULT($complCFLAGS)
+
+-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+- [$1], CXX, [depcc="$CXX" am_compiler_list=],
+- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+- [$1], UPC, [depcc="$UPC" am_compiler_list=],
+- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+- [depcc="$$1" am_compiler_list=])
++ WARN_CFLAGS="$warning_flags $complCFLAGS"
++ AC_SUBST(WARN_CFLAGS)
++])
+
+-AC_CACHE_CHECK([dependency style of $depcc],
+- [am_cv_$1_dependencies_compiler_type],
+-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+- # We make a subdir and do the tests there. Otherwise we can end up
+- # making bogus files that we don't know about and never remove. For
+- # instance it was reported that on HP-UX the gcc test will end up
+- # making a dummy file named `D' -- because `-MD' means `put the output
+- # in D'.
+- mkdir conftest.dir
+- # Copy depcomp to subdir because otherwise we won't find it if we're
+- # using a relative directory.
+- cp "$am_depcomp" conftest.dir
+- cd conftest.dir
+- # We will build objects and dependencies in a subdirectory because
+- # it helps to detect inapplicable dependency modes. For instance
+- # both Tru64's cc and ICC support -MD to output dependencies as a
+- # side effect of compilation, but ICC will put the dependencies in
+- # the current directory while Tru64 will put them in the object
+- # directory.
+- mkdir sub
++dnl For C++, do basically the same thing.
+
+- am_cv_$1_dependencies_compiler_type=none
+- if test "$am_compiler_list" = ""; then
+- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++AC_DEFUN([GNOME_CXX_WARNINGS],[
++ AC_ARG_ENABLE(cxx-warnings,
++ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@]
++ [Turn on compiler warnings.]),,
++ [enable_cxx_warnings="m4_default([$1],[minimum])"])
++
++ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler)
++ warnCXXFLAGS=
++ if test "x$GXX" != xyes; then
++ enable_cxx_warnings=no
+ fi
+- for depmode in $am_compiler_list; do
+- # Setup a source with many dependencies, because some compilers
+- # like to wrap large dependency lists on column 80 (with \), and
+- # we should not choose a depcomp mode which is confused by this.
+- #
+- # We need to recreate these files for each test, as the compiler may
+- # overwrite some of them when testing with obscure command lines.
+- # This happens at least with the AIX C compiler.
+- : > sub/conftest.c
+- for i in 1 2 3 4 5 6; do
+- echo '#include "conftst'$i'.h"' >> sub/conftest.c
+- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+- # Solaris 8's {/usr,}/bin/sh.
+- touch sub/conftst$i.h
+- done
+- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++ if test "x$enable_cxx_warnings" != "xno"; then
++ if test "x$GXX" = "xyes"; then
++ case " $CXXFLAGS " in
++ *[\ \ ]-Wall[\ \ ]*) ;;
++ *) warnCXXFLAGS="-Wall -Wno-unused" ;;
++ esac
+
+- case $depmode in
+- nosideeffect)
+- # after this tag, mechanisms are not by side-effect, so they'll
+- # only be used when explicitly requested
+- if test "x$enable_dependency_tracking" = xyes; then
+- continue
+- else
+- break
+- fi
+- ;;
+- none) break ;;
+- esac
+- # We check with `-c' and `-o' for the sake of the "dashmstdout"
+- # mode. It turns out that the SunPro C++ compiler does not properly
+- # handle `-M -o', and we need to detect this.
+- if depmode=$depmode \
+- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+- >/dev/null 2>conftest.err &&
+- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+- # icc doesn't choke on unknown options, it will just issue warnings
+- # or remarks (even with -Werror). So we grep stderr for any message
+- # that says an option was ignored or not supported.
+- # When given -MP, icc 7.0 and 7.1 complain thusly:
+- # icc: Command line warning: ignoring option '-M'; no argument required
+- # The diagnosis changed in icc 8.0:
+- # icc: Command line remark: option '-MP' not supported
+- if (grep 'ignoring option' conftest.err ||
+- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+- am_cv_$1_dependencies_compiler_type=$depmode
+- break
++ ## -W is not all that useful. And it cannot be controlled
++ ## with individual -Wno-xxx flags, unlike -Wall
++ if test "x$enable_cxx_warnings" = "xyes"; then
++ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual"
+ fi
+ fi
+- done
+-
+- cd ..
+- rm -rf conftest.dir
+-else
+- am_cv_$1_dependencies_compiler_type=none
+-fi
+-])
+-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+-AM_CONDITIONAL([am__fastdep$1], [
+- test "x$enable_dependency_tracking" != xno \
+- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+-])
++ fi
++ AC_MSG_RESULT($warnCXXFLAGS)
+
++ AC_ARG_ENABLE(iso-cxx,
++ AC_HELP_STRING([--enable-iso-cxx],
++ [Try to warn if code is not ISO C++ ]),,
++ [enable_iso_cxx=no])
+
+-# AM_SET_DEPDIR
+-# -------------
+-# Choose a directory name for dependency files.
+-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+-AC_DEFUN([AM_SET_DEPDIR],
+-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+-])
++ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler)
++ complCXXFLAGS=
++ if test "x$enable_iso_cxx" != "xno"; then
++ if test "x$GXX" = "xyes"; then
++ case " $CXXFLAGS " in
++ *[\ \ ]-ansi[\ \ ]*) ;;
++ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;;
++ esac
+
++ case " $CXXFLAGS " in
++ *[\ \ ]-pedantic[\ \ ]*) ;;
++ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;;
++ esac
++ fi
++ fi
++ AC_MSG_RESULT($complCXXFLAGS)
+
+-# AM_DEP_TRACK
+-# ------------
+-AC_DEFUN([AM_DEP_TRACK],
+-[AC_ARG_ENABLE(dependency-tracking,
+-[ --disable-dependency-tracking speeds up one-time build
+- --enable-dependency-tracking do not reject slow dependency extractors])
+-if test "x$enable_dependency_tracking" != xno; then
+- am_depcomp="$ac_aux_dir/depcomp"
+- AMDEPBACKSLASH='\'
+-fi
+-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+-AC_SUBST([AMDEPBACKSLASH])dnl
+-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
++ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS"
++ AC_SUBST(WARN_CXXFLAGS)
+ ])
+
+-# Generate code to set up dependency tracking. -*- Autoconf -*-
+-
+-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+-
+-#serial 3
+-
+-# _AM_OUTPUT_DEPENDENCY_COMMANDS
+-# ------------------------------
+-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+-[for mf in $CONFIG_FILES; do
+- # Strip MF so we end up with the name of the file.
+- mf=`echo "$mf" | sed -e 's/:.*$//'`
+- # Check whether this is an Automake generated Makefile or not.
+- # We used to match only the files named `Makefile.in', but
+- # some people rename them; so instead we look at the file content.
+- # Grep'ing the first line is not enough: some people post-process
+- # each Makefile.in and add a new line on top of each file to say so.
+- # Grep'ing the whole file is not good either: AIX grep has a line
+- # limit of 2048, but all sed's we know have understand at least 4000.
+- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+- dirpart=`AS_DIRNAME("$mf")`
+- else
+- continue
+- fi
+- # Extract the definition of DEPDIR, am__include, and am__quote
+- # from the Makefile without running `make'.
+- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+- test -z "$DEPDIR" && continue
+- am__include=`sed -n 's/^am__include = //p' < "$mf"`
+- test -z "am__include" && continue
+- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+- # When using ansi2knr, U may be empty or an underscore; expand it
+- U=`sed -n 's/^U = //p' < "$mf"`
+- # Find all dependency output files, they are included files with
+- # $(DEPDIR) in their names. We invoke sed twice because it is the
+- # simplest approach to changing $(DEPDIR) to its actual value in the
+- # expansion.
+- for file in `sed -n "
+- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+- # Make sure the directory exists.
+- test -f "$dirpart/$file" && continue
+- fdir=`AS_DIRNAME(["$file"])`
+- AS_MKDIR_P([$dirpart/$fdir])
+- # echo "creating $dirpart/$file"
+- echo '# dummy' > "$dirpart/$file"
+- done
+-done
+-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+
++# serial 52 Debian 1.5.26-4 AC_PROG_LIBTOOL
+
+-# AM_OUTPUT_DEPENDENCY_COMMANDS
+-# -----------------------------
+-# This macro should only be invoked once -- use via AC_REQUIRE.
+-#
+-# This code is only required when automatic dependency tracking
+-# is enabled. FIXME. This creates each `.P' file that we will
+-# need in order to bootstrap the dependency handling code.
+-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+-[AC_CONFIG_COMMANDS([depfiles],
+- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+-])
+
+-# Do all the work for Automake. -*- Autoconf -*-
++# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
++# -----------------------------------------------------------
++# If this macro is not defined by Autoconf, define it here.
++m4_ifdef([AC_PROVIDE_IFELSE],
++ [],
++ [m4_define([AC_PROVIDE_IFELSE],
++ [m4_ifdef([AC_PROVIDE_$1],
++ [$2], [$3])])])
+
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+-# 2005, 2006, 2008 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# serial 13
++# AC_PROG_LIBTOOL
++# ---------------
++AC_DEFUN([AC_PROG_LIBTOOL],
++[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
++dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
++dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
++ AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [AC_LIBTOOL_CXX],
++ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
++ ])])
++dnl And a similar setup for Fortran 77 support
++ AC_PROVIDE_IFELSE([AC_PROG_F77],
++ [AC_LIBTOOL_F77],
++ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
++])])
+
+-# This macro actually does too much. Some checks are only needed if
+-# your package does certain things. But this isn't really a big deal.
++dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
++dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
++dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
++ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++ [AC_LIBTOOL_GCJ],
++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++ [AC_LIBTOOL_GCJ],
++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
++ [AC_LIBTOOL_GCJ],
++ [ifdef([AC_PROG_GCJ],
++ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++ ifdef([A][M_PROG_GCJ],
++ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++ ifdef([LT_AC_PROG_GCJ],
++ [define([LT_AC_PROG_GCJ],
++ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
++])])# AC_PROG_LIBTOOL
+
+-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+-# AM_INIT_AUTOMAKE([OPTIONS])
+-# -----------------------------------------------
+-# The call with PACKAGE and VERSION arguments is the old style
+-# call (pre autoconf-2.50), which is being phased out. PACKAGE
+-# and VERSION should now be passed to AC_INIT and removed from
+-# the call to AM_INIT_AUTOMAKE.
+-# We support both call styles for the transition. After
+-# the next Automake release, Autoconf can make the AC_INIT
+-# arguments mandatory, and then we can depend on a new Autoconf
+-# release and drop the old call support.
+-AC_DEFUN([AM_INIT_AUTOMAKE],
+-[AC_PREREQ([2.60])dnl
+-dnl Autoconf wants to disallow AM_ names. We explicitly allow
+-dnl the ones we care about.
+-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+-AC_REQUIRE([AC_PROG_INSTALL])dnl
+-if test "`cd $srcdir && pwd`" != "`pwd`"; then
+- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+- # is not polluted with repeated "-I."
+- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+- # test to see if srcdir already configured
+- if test -f $srcdir/config.status; then
+- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+- fi
+-fi
+
+-# test whether we have cygpath
+-if test -z "$CYGPATH_W"; then
+- if (cygpath --version) >/dev/null 2>/dev/null; then
+- CYGPATH_W='cygpath -w'
+- else
+- CYGPATH_W=echo
+- fi
+-fi
+-AC_SUBST([CYGPATH_W])
++# _AC_PROG_LIBTOOL
++# ----------------
++AC_DEFUN([_AC_PROG_LIBTOOL],
++[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+-# Define the identity of the package.
+-dnl Distinguish between old-style and new-style calls.
+-m4_ifval([$2],
+-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+- AC_SUBST([PACKAGE], [$1])dnl
+- AC_SUBST([VERSION], [$2])],
+-[_AM_SET_OPTIONS([$1])dnl
+-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+-_AM_IF_OPTION([no-define],,
+-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
+
+-# Some tools Automake needs.
+-AC_REQUIRE([AM_SANITY_CHECK])dnl
+-AC_REQUIRE([AC_ARG_PROGRAM])dnl
+-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+-AM_MISSING_PROG(AUTOCONF, autoconf)
+-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+-AM_MISSING_PROG(AUTOHEADER, autoheader)
+-AM_MISSING_PROG(MAKEINFO, makeinfo)
+-AM_PROG_INSTALL_SH
+-AM_PROG_INSTALL_STRIP
+-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+-# We need awk for the "check" target. The system "awk" is bad on
+-# some platforms.
+-AC_REQUIRE([AC_PROG_AWK])dnl
+-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+- [_AM_PROG_TAR([v7])])])
+-_AM_IF_OPTION([no-dependencies],,
+-[AC_PROVIDE_IFELSE([AC_PROG_CC],
+- [_AM_DEPENDENCIES(CC)],
+- [define([AC_PROG_CC],
+- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+-AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [_AM_DEPENDENCIES(CXX)],
+- [define([AC_PROG_CXX],
+- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+- [_AM_DEPENDENCIES(OBJC)],
+- [define([AC_PROG_OBJC],
+- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+-])
+-])
++# Prevent multiple expansion
++define([AC_PROG_LIBTOOL], [])
++])# _AC_PROG_LIBTOOL
+
+
+-# When config.status generates a header, we must update the stamp-h file.
+-# This file resides in the same directory as the config header
+-# that is generated. The stamp files are numbered to have different names.
++# AC_LIBTOOL_SETUP
++# ----------------
++AC_DEFUN([AC_LIBTOOL_SETUP],
++[AC_PREREQ(2.50)dnl
++AC_REQUIRE([AC_ENABLE_SHARED])dnl
++AC_REQUIRE([AC_ENABLE_STATIC])dnl
++AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_LD])dnl
++AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
++AC_REQUIRE([AC_PROG_NM])dnl
+
+-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+-# loop where config.status creates the headers, so we can generate
+-# our stamp files there.
+-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+-[# Compute $1's index in $config_headers.
+-_am_arg=$1
+-_am_stamp_count=1
+-for _am_header in $config_headers :; do
+- case $_am_header in
+- $_am_arg | $_am_arg:* )
+- break ;;
+- * )
+- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+- esac
+-done
+-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
++AC_REQUIRE([AC_PROG_LN_S])dnl
++AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
++AC_REQUIRE([AC_OBJEXT])dnl
++AC_REQUIRE([AC_EXEEXT])dnl
++dnl
++AC_LIBTOOL_SYS_MAX_CMD_LEN
++AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
++AC_LIBTOOL_OBJDIR
+
+-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++_LT_AC_PROG_ECHO_BACKSLASH
+
+-# AM_PROG_INSTALL_SH
+-# ------------------
+-# Define $install_sh.
+-AC_DEFUN([AM_PROG_INSTALL_SH],
+-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+-AC_SUBST(install_sh)])
++case $host_os in
++aix3*)
++ # AIX sometimes has problems with the GCC collect2 program. For some
++ # reason, if we set the COLLECT_NAMES environment variable, the problems
++ # vanish in a puff of smoke.
++ if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++ fi
++ ;;
++esac
+
+-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+-# serial 2
++# Same as above, but do not quote variable references.
++[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+
+-# Check whether the underlying file-system supports filenames
+-# with a leading dot. For instance MS-DOS doesn't.
+-AC_DEFUN([AM_SET_LEADING_DOT],
+-[rm -rf .tst 2>/dev/null
+-mkdir .tst 2>/dev/null
+-if test -d .tst; then
+- am__leading_dot=.
+-else
+- am__leading_dot=_
+-fi
+-rmdir .tst 2>/dev/null
+-AC_SUBST([am__leading_dot])])
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+-# From Jim Meyering
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
+
+-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# Constants:
++rm="rm -f"
+
+-# serial 4
++# Global variables:
++default_ofile=libtool
++can_build_shared=yes
+
+-AC_DEFUN([AM_MAINTAINER_MODE],
+-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+- dnl maintainer-mode is disabled by default
+- AC_ARG_ENABLE(maintainer-mode,
+-[ --enable-maintainer-mode enable make rules and dependencies not useful
+- (and sometimes confusing) to the casual installer],
+- USE_MAINTAINER_MODE=$enableval,
+- USE_MAINTAINER_MODE=no)
+- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+- MAINT=$MAINTAINER_MODE_TRUE
+- AC_SUBST(MAINT)dnl
+-]
+-)
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++ltmain="$ac_aux_dir/ltmain.sh"
++ofile="$default_ofile"
++with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
++AC_CHECK_TOOL(AR, ar, false)
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++AC_CHECK_TOOL(STRIP, strip, :)
+
+-# Check to see how 'make' treats includes. -*- Autoconf -*-
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
+
+-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# Set sane defaults for various variables
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++test -z "$AS" && AS=as
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++test -z "$LD" && LD=ld
++test -z "$LN_S" && LN_S="ln -s"
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++test -z "$NM" && NM=nm
++test -z "$SED" && SED=sed
++test -z "$OBJDUMP" && OBJDUMP=objdump
++test -z "$RANLIB" && RANLIB=:
++test -z "$STRIP" && STRIP=:
++test -z "$ac_objext" && ac_objext=o
+
+-# serial 3
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
+
+-# AM_MAKE_INCLUDE()
+-# -----------------
+-# Check to see how make treats includes.
+-AC_DEFUN([AM_MAKE_INCLUDE],
+-[am_make=${MAKE-make}
+-cat > confinc << 'END'
+-am__doit:
+- @echo done
+-.PHONY: am__doit
+-END
+-# If we don't find an include directive, just comment out the code.
+-AC_MSG_CHECKING([for style of include used by $am_make])
+-am__include="#"
+-am__quote=
+-_am_result=none
+-# First try GNU make style include.
+-echo "include confinc" > confmf
+-# We grep out `Entering directory' and `Leaving directory'
+-# messages which can occur if `w' ends up in MAKEFLAGS.
+-# In particular we don't look at `^make:' because GNU make might
+-# be invoked under some other name (usually "gmake"), in which
+-# case it prints its new name instead of `make'.
+-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+- am__include=include
+- am__quote=
+- _am_result=GNU
+-fi
+-# Now try BSD make style include.
+-if test "$am__include" = "#"; then
+- echo '.include "confinc"' > confmf
+- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+- am__include=.include
+- am__quote="\""
+- _am_result=BSD
+- fi
++if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++ ;;
++ *)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++ ;;
++ esac
++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ fi
+-AC_SUBST([am__include])
+-AC_SUBST([am__quote])
+-AC_MSG_RESULT([$_am_result])
+-rm -f confinc confmf
+-])
+
+-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
++_LT_CC_BASENAME([$compiler])
+
+-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# Only perform the check for file, if the check method requires it
++case $deplibs_check_method in
++file_magic*)
++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++ AC_PATH_MAGIC
++ fi
++ ;;
++esac
+
+-# serial 5
++_LT_REQUIRED_DARWIN_CHECKS
+
+-# AM_MISSING_PROG(NAME, PROGRAM)
+-# ------------------------------
+-AC_DEFUN([AM_MISSING_PROG],
+-[AC_REQUIRE([AM_MISSING_HAS_RUN])
+-$1=${$1-"${am_missing_run}$2"}
+-AC_SUBST($1)])
++AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++enable_win32_dll=yes, enable_win32_dll=no)
+
++AC_ARG_ENABLE([libtool-lock],
++ [AC_HELP_STRING([--disable-libtool-lock],
++ [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+-# AM_MISSING_HAS_RUN
+-# ------------------
+-# Define MISSING if not defined so far and test if it supports --run.
+-# If it does, set am_missing_run to use it, otherwise, to nothing.
+-AC_DEFUN([AM_MISSING_HAS_RUN],
+-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+-AC_REQUIRE_AUX_FILE([missing])dnl
+-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+-# Use eval to expand $SHELL
+-if eval "$MISSING --run true"; then
+- am_missing_run="$MISSING --run "
+-else
+- am_missing_run=
+- AC_MSG_WARN([`missing' script is too old or missing])
+-fi
+-])
++AC_ARG_WITH([pic],
++ [AC_HELP_STRING([--with-pic],
++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++ [pic_mode="$withval"],
++ [pic_mode=default])
++test -z "$pic_mode" && pic_mode=default
+
+-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# Use C for the default configuration in the libtool script
++tagname=
++AC_LIBTOOL_LANG_C_CONFIG
++_LT_AC_TAGCONFIG
++])# AC_LIBTOOL_SETUP
+
+-# AM_PROG_MKDIR_P
+-# ---------------
+-# Check for `mkdir -p'.
+-AC_DEFUN([AM_PROG_MKDIR_P],
+-[AC_PREREQ([2.60])dnl
+-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+-dnl while keeping a definition of mkdir_p for backward compatibility.
+-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+-dnl Makefile.ins that do not define MKDIR_P, so we do our own
+-dnl adjustment using top_builddir (which is defined more often than
+-dnl MKDIR_P).
+-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+-case $mkdir_p in
+- [[\\/$]]* | ?:[[\\/]]*) ;;
+- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+-esac
+-])
+
+-# Helper functions for option handling. -*- Autoconf -*-
++# _LT_AC_SYS_COMPILER
++# -------------------
++AC_DEFUN([_LT_AC_SYS_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
+
+-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
+
+-# serial 3
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+-# _AM_MANGLE_OPTION(NAME)
+-# -----------------------
+-AC_DEFUN([_AM_MANGLE_OPTION],
+-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_AC_SYS_COMPILER
+
+-# _AM_SET_OPTION(NAME)
+-# ------------------------------
+-# Set option NAME. Presently that only means defining a flag for this option.
+-AC_DEFUN([_AM_SET_OPTION],
+-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+-# _AM_SET_OPTIONS(OPTIONS)
+-# ----------------------------------
+-# OPTIONS is a space-separated list of Automake options.
+-AC_DEFUN([_AM_SET_OPTIONS],
+-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
++AC_DEFUN([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++ case $cc_temp in
++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
+
+-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+-# -------------------------------------------
+-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+-AC_DEFUN([_AM_IF_OPTION],
+-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+-# Check to make sure that the build environment is sane. -*- Autoconf -*-
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++AC_DEFUN([_LT_COMPILER_BOILERPLATE],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_COMPILER_BOILERPLATE
+
+-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# serial 4
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++AC_DEFUN([_LT_LINKER_BOILERPLATE],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm -r conftest*
++])# _LT_LINKER_BOILERPLATE
+
+-# AM_SANITY_CHECK
+-# ---------------
+-AC_DEFUN([AM_SANITY_CHECK],
+-[AC_MSG_CHECKING([whether build environment is sane])
+-# Just in case
+-sleep 1
+-echo timestamp > conftest.file
+-# Do `set' in a subshell so we don't clobber the current shell's
+-# arguments. Must try -L first in case configure is actually a
+-# symlink; some systems play weird games with the mod time of symlinks
+-# (eg FreeBSD returns the mod time of the symlink's containing
+-# directory).
+-if (
+- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+- if test "$[*]" = "X"; then
+- # -L didn't work.
+- set X `ls -t $srcdir/configure conftest.file`
+- fi
+- rm -f conftest.file
+- if test "$[*]" != "X $srcdir/configure conftest.file" \
+- && test "$[*]" != "X conftest.file $srcdir/configure"; then
++# _LT_REQUIRED_DARWIN_CHECKS
++# --------------------------
++# Check for some things on darwin
++AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
++ case $host_os in
++ rhapsody* | darwin*)
++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+
+- # If neither matched, then we have a broken ls. This can happen
+- # if, for instance, CONFIG_SHELL is bash and it inherits a
+- # broken ls alias from the environment. This has actually
+- # happened. Such a system could not be considered "sane".
+- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+-alias in your environment])
++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
++ [lt_cv_apple_cc_single_mod=no
++ if test -z "${LT_MULTI_MODULE}"; then
++ # By default we will add the -single_module flag. You can override
++ # by either setting the environment variable LT_MULTI_MODULE
++ # non-empty at configure time, or by adding -multi_module to the
++ # link flags.
++ echo "int foo(void){return 1;}" > conftest.c
++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++ -dynamiclib ${wl}-single_module conftest.c
++ if test -f libconftest.dylib; then
++ lt_cv_apple_cc_single_mod=yes
++ rm -rf libconftest.dylib*
+ fi
++ rm conftest.c
++ fi])
++ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
++ [lt_cv_ld_exported_symbols_list],
++ [lt_cv_ld_exported_symbols_list=no
++ save_LDFLAGS=$LDFLAGS
++ echo "_main" > conftest.sym
++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [lt_cv_ld_exported_symbols_list=yes],
++ [lt_cv_ld_exported_symbols_list=no])
++ LDFLAGS="$save_LDFLAGS"
++ ])
++ case $host_os in
++ rhapsody* | darwin1.[[0123]])
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++ darwin1.*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ darwin*)
++ # if running on 10.5 or later, the deployment target defaults
++ # to the OS version, if on x86, and 10.4, the deployment
++ # target defaults to 10.4. Don't you love it?
++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ 10.[[012]]*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ 10.*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ esac
++ ;;
++ esac
++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++ _lt_dar_single_mod='$single_module'
++ fi
++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++ else
++ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
++ fi
++ if test "$DSYMUTIL" != ":"; then
++ _lt_dsymutil="~$DSYMUTIL \$lib || :"
++ else
++ _lt_dsymutil=
++ fi
++ ;;
++ esac
++])
+
+- test "$[2]" = conftest.file
+- )
+-then
+- # Ok.
+- :
+-else
+- AC_MSG_ERROR([newly created file is older than distributed files!
+-Check your system clock])
+-fi
+-AC_MSG_RESULT(yes)])
++# _LT_AC_SYS_LIBPATH_AIX
++# ----------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\(.*\)$/\1/
++ p
++ }
++ }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then
++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi],[])
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++])# _LT_AC_SYS_LIBPATH_AIX
+
+-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# AM_PROG_INSTALL_STRIP
+-# ---------------------
+-# One issue with vendor `install' (even GNU) is that you can't
+-# specify the program used to strip binaries. This is especially
+-# annoying in cross-compiling environments, where the build's strip
+-# is unlikely to handle the host's binaries.
+-# Fortunately install-sh will honor a STRIPPROG variable, so we
+-# always use install-sh in `make install-strip', and initialize
+-# STRIPPROG with the value of the STRIP variable (set by the user).
+-AC_DEFUN([AM_PROG_INSTALL_STRIP],
+-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+-# Installed binaries are usually stripped using `strip' when the user
+-# run `make install-strip'. However `strip' might not be the right
+-# tool to use in cross-compilation environments, therefore Automake
+-# will honor the `STRIP' environment variable to overrule this program.
+-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+-if test "$cross_compiling" != no; then
+- AC_CHECK_TOOL([STRIP], [strip], :)
++# _LT_AC_SHELL_INIT(ARG)
++# ----------------------
++AC_DEFUN([_LT_AC_SHELL_INIT],
++[ifdef([AC_DIVERSION_NOTICE],
++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
++ [AC_DIVERT_PUSH(NOTICE)])
++$1
++AC_DIVERT_POP
++])# _LT_AC_SHELL_INIT
++
++
++# _LT_AC_PROG_ECHO_BACKSLASH
++# --------------------------
++# Add some code to the start of the generated configure script which
++# will find an echo command which doesn't interpret backslashes.
++AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
++[_LT_AC_SHELL_INIT([
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$ECHO in
++X*--fallback-echo)
++ # Remove one level of quotation (which was required for Make).
++ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
++ ;;
++esac
++
++echo=${ECHO-echo}
++if test "X[$]1" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++elif test "X[$]1" = X--fallback-echo; then
++ # Avoid inline document here, it may be left over
++ :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
++ # Yippee, $echo works!
++ :
++else
++ # Restart under the correct shell.
++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ fi
+-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+-AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+-# Copyright (C) 2006 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++if test "X[$]1" = X--fallback-echo; then
++ # used as fallback echo
++ shift
++ cat <<EOF
++[$]*
++EOF
++ exit 0
++fi
+
+-# _AM_SUBST_NOTMAKE(VARIABLE)
+-# ---------------------------
+-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+-# This macro is traced by Automake.
+-AC_DEFUN([_AM_SUBST_NOTMAKE])
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+-# Check how to create a tarball. -*- Autoconf -*-
++if test -z "$ECHO"; then
++if test "X${echo_test_string+set}" != Xset; then
++# find a string as large as possible, as long as the shell can cope with it
++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
++ echo_test_string=`eval $cmd` &&
++ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
++ then
++ break
++ fi
++ done
++fi
+
+-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ :
++else
++ # The Solaris, AIX, and Digital Unix default echo programs unquote
++ # backslashes. This makes it impossible to quote backslashes using
++ # echo "$something" | sed 's/\\/\\\\/g'
++ #
++ # So, first we look for a working echo in the user's PATH.
+
+-# serial 2
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for dir in $PATH /usr/ucb; do
++ IFS="$lt_save_ifs"
++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ echo="$dir/echo"
++ break
++ fi
++ done
++ IFS="$lt_save_ifs"
+
+-# _AM_PROG_TAR(FORMAT)
+-# --------------------
+-# Check how to create a tarball in format FORMAT.
+-# FORMAT should be one of `v7', `ustar', or `pax'.
+-#
+-# Substitute a variable $(am__tar) that is a command
+-# writing to stdout a FORMAT-tarball containing the directory
+-# $tardir.
+-# tardir=directory && $(am__tar) > result.tar
+-#
+-# Substitute a variable $(am__untar) that extract such
+-# a tarball read from stdin.
+-# $(am__untar) < result.tar
+-AC_DEFUN([_AM_PROG_TAR],
+-[# Always define AMTAR for backward compatibility.
+-AM_MISSING_PROG([AMTAR], [tar])
+-m4_if([$1], [v7],
+- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+- [m4_case([$1], [ustar],, [pax],,
+- [m4_fatal([Unknown tar format])])
+-AC_MSG_CHECKING([how to create a $1 tar archive])
+-# Loop over all known methods to create a tar archive until one works.
+-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+-# Do not fold the above two line into one, because Tru64 sh and
+-# Solaris sh will not grok spaces in the rhs of `-'.
+-for _am_tool in $_am_tools
+-do
+- case $_am_tool in
+- gnutar)
+- for _am_tar in tar gnutar gtar;
+- do
+- AM_RUN_LOG([$_am_tar --version]) && break
+- done
+- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+- am__untar="$_am_tar -xf -"
+- ;;
+- plaintar)
+- # Must skip GNU tar: if it does not support --format= it doesn't create
+- # ustar tarball either.
+- (tar --version) >/dev/null 2>&1 && continue
+- am__tar='tar chf - "$$tardir"'
+- am__tar_='tar chf - "$tardir"'
+- am__untar='tar xf -'
+- ;;
+- pax)
+- am__tar='pax -L -x $1 -w "$$tardir"'
+- am__tar_='pax -L -x $1 -w "$tardir"'
+- am__untar='pax -r'
+- ;;
+- cpio)
+- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+- am__untar='cpio -i -H $1 -d'
+- ;;
+- none)
+- am__tar=false
+- am__tar_=false
+- am__untar=false
+- ;;
+- esac
++ if test "X$echo" = Xecho; then
++ # We didn't find a better echo, so look for alternatives.
++ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # This shell has a builtin print -r that does the trick.
++ echo='print -r'
++ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
++ test "X$CONFIG_SHELL" != X/bin/ksh; then
++ # If we have ksh, try running configure again with it.
++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++ export ORIGINAL_CONFIG_SHELL
++ CONFIG_SHELL=/bin/ksh
++ export CONFIG_SHELL
++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
++ else
++ # Try using printf.
++ echo='printf %s\n'
++ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # Cool, printf works
++ :
++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++ export CONFIG_SHELL
++ SHELL="$CONFIG_SHELL"
++ export SHELL
++ echo="$CONFIG_SHELL [$]0 --fallback-echo"
++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ echo="$CONFIG_SHELL [$]0 --fallback-echo"
++ else
++ # maybe with a smaller string...
++ prev=:
+
+- # If the value was cached, stop now. We just wanted to have am__tar
+- # and am__untar set.
+- test -n "${am_cv_prog_tar_$1}" && break
++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
++ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
++ then
++ break
++ fi
++ prev="$cmd"
++ done
+
+- # tar/untar a dummy directory, and stop if the command works
+- rm -rf conftest.dir
+- mkdir conftest.dir
+- echo GrepMe > conftest.dir/file
+- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+- rm -rf conftest.dir
+- if test -s conftest.tar; then
+- AM_RUN_LOG([$am__untar <conftest.tar])
+- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
++ if test "$prev" != 'sed 50q "[$]0"'; then
++ echo_test_string=`eval $prev`
++ export echo_test_string
++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
++ else
++ # Oops. We lost completely, so just stick with echo.
++ echo=echo
++ fi
++ fi
++ fi
+ fi
+-done
+-rm -rf conftest.dir
++fi
++fi
+
+-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+-AC_SUBST([am__tar])
+-AC_SUBST([am__untar])
+-]) # _AM_PROG_TAR
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++ECHO=$echo
++if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
++ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
++fi
+
+-# gnome-common.m4
+-#
++AC_SUBST(ECHO)
++])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+-dnl GNOME_COMMON_INIT
+
+-AC_DEFUN([GNOME_COMMON_INIT],
+-[
+- dnl this macro should come after AC_CONFIG_MACRO_DIR
+- AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0])
++# _LT_AC_LOCK
++# -----------
++AC_DEFUN([_LT_AC_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++ [AC_HELP_STRING([--disable-libtool-lock],
++ [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+- dnl ensure that when the Automake generated makefile calls aclocal,
+- dnl it honours the $ACLOCAL_FLAGS environment variable
+- ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}"
+- if test -n "$ac_macro_dir"; then
+- ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS"
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *ELF-32*)
++ HPUX_IA64_MODE="32"
++ ;;
++ *ELF-64*)
++ HPUX_IA64_MODE="64"
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++*-*-irix6*)
++ # Find out which ABI we are using.
++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -melf32bsmip"
++ ;;
++ *N32*)
++ LD="${LD-ld} -melf32bmipn32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -melf64bmip"
++ ;;
++ esac
++ else
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -32"
++ ;;
++ *N32*)
++ LD="${LD-ld} -n32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -64"
++ ;;
++ esac
++ fi
+ fi
++ rm -rf conftest*
++ ;;
+
+- AC_SUBST([ACLOCAL_AMFLAGS])
+-])
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|sparc*-*linux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *32-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_i386_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_i386"
++ ;;
++ ppc64-*linux*|powerpc64-*linux*)
++ LD="${LD-ld} -m elf32ppclinux"
++ ;;
++ s390x-*linux*)
++ LD="${LD-ld} -m elf_s390"
++ ;;
++ sparc64-*linux*)
++ LD="${LD-ld} -m elf32_sparc"
++ ;;
++ esac
++ ;;
++ *64-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_x86_64_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ ppc*-*linux*|powerpc*-*linux*)
++ LD="${LD-ld} -m elf64ppc"
++ ;;
++ s390*-*linux*)
++ LD="${LD-ld} -m elf64_s390"
++ ;;
++ sparc*-*linux*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
+
+-AC_DEFUN([GNOME_DEBUG_CHECK],
+-[
+- AC_ARG_ENABLE([debug],
+- AC_HELP_STRING([--enable-debug],
+- [turn on debugging]),,
+- [enable_debug=no])
+-
+- if test x$enable_debug = xyes ; then
+- AC_DEFINE(GNOME_ENABLE_DEBUG, 1,
+- [Enable additional debugging at the expense of performance and size])
+- fi
+-])
+-
+-dnl GNOME_MAINTAINER_MODE_DEFINES ()
+-dnl define DISABLE_DEPRECATED
+-dnl
+-AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES],
+-[
+- AC_REQUIRE([AM_MAINTAINER_MODE])
+-
+- if test $USE_MAINTAINER_MODE = yes; then
+- DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED"
+- else
+- DISABLE_DEPRECATED=""
+- fi
+- AC_SUBST(DISABLE_DEPRECATED)
+-])
+-
+-dnl GNOME_COMPILE_WARNINGS
+-dnl Turn on many useful compiler warnings
+-dnl For now, only works on GCC
+-AC_DEFUN([GNOME_COMPILE_WARNINGS],[
+- dnl ******************************
+- dnl More compiler warnings
+- dnl ******************************
+-
+- AC_ARG_ENABLE(compile-warnings,
+- AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@],
+- [Turn on compiler warnings]),,
+- [enable_compile_warnings="m4_default([$1],[yes])"])
+-
+- warnCFLAGS=
+- if test "x$GCC" != xyes; then
+- enable_compile_warnings=no
+- fi
+-
+- warning_flags=
+- realsave_CFLAGS="$CFLAGS"
+-
+- case "$enable_compile_warnings" in
+- no)
+- warning_flags=
+- ;;
+- minimum)
+- warning_flags="-Wall"
+- ;;
+- yes)
+- warning_flags="-Wall -Wmissing-prototypes"
+- ;;
+- maximum|error)
+- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith"
+- CFLAGS="$warning_flags $CFLAGS"
+- for option in -Wno-sign-compare; do
+- SAVE_CFLAGS="$CFLAGS"
+- CFLAGS="$CFLAGS $option"
+- AC_MSG_CHECKING([whether gcc understands $option])
+- AC_TRY_COMPILE([], [],
+- has_option=yes,
+- has_option=no,)
+- CFLAGS="$SAVE_CFLAGS"
+- AC_MSG_RESULT($has_option)
+- if test $has_option = yes; then
+- warning_flags="$warning_flags $option"
+- fi
+- unset has_option
+- unset SAVE_CFLAGS
+- done
+- unset option
+- if test "$enable_compile_warnings" = "error" ; then
+- warning_flags="$warning_flags -Werror"
++*-*-sco3.2v5*)
++ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++ SAVE_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS -belf"
++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++ [AC_LANG_PUSH(C)
++ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++ AC_LANG_POP])
++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++ CFLAGS="$SAVE_CFLAGS"
++ fi
++ ;;
++sparc*-*solaris*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *64-bit*)
++ case $lt_cv_prog_gnu_ld in
++ yes*) LD="${LD-ld} -m elf64_sparc" ;;
++ *)
++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++ LD="${LD-ld} -64"
+ fi
+ ;;
+- *)
+- AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings)
+- ;;
++ esac
++ ;;
+ esac
+- CFLAGS="$realsave_CFLAGS"
+- AC_MSG_CHECKING(what warning flags to pass to the C compiler)
+- AC_MSG_RESULT($warning_flags)
+-
+- AC_ARG_ENABLE(iso-c,
+- AC_HELP_STRING([--enable-iso-c],
+- [Try to warn if code is not ISO C ]),,
+- [enable_iso_c=no])
+-
+- AC_MSG_CHECKING(what language compliance flags to pass to the C compiler)
+- complCFLAGS=
+- if test "x$enable_iso_c" != "xno"; then
+- if test "x$GCC" = "xyes"; then
+- case " $CFLAGS " in
+- *[\ \ ]-ansi[\ \ ]*) ;;
+- *) complCFLAGS="$complCFLAGS -ansi" ;;
+- esac
+- case " $CFLAGS " in
+- *[\ \ ]-pedantic[\ \ ]*) ;;
+- *) complCFLAGS="$complCFLAGS -pedantic" ;;
+- esac
+- fi
+- fi
+- AC_MSG_RESULT($complCFLAGS)
+-
+- WARN_CFLAGS="$warning_flags $complCFLAGS"
+- AC_SUBST(WARN_CFLAGS)
+-])
+-
+-dnl For C++, do basically the same thing.
+-
+-AC_DEFUN([GNOME_CXX_WARNINGS],[
+- AC_ARG_ENABLE(cxx-warnings,
+- AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@]
+- [Turn on compiler warnings.]),,
+- [enable_cxx_warnings="m4_default([$1],[minimum])"])
+-
+- AC_MSG_CHECKING(what warning flags to pass to the C++ compiler)
+- warnCXXFLAGS=
+- if test "x$GXX" != xyes; then
+- enable_cxx_warnings=no
+ fi
+- if test "x$enable_cxx_warnings" != "xno"; then
+- if test "x$GXX" = "xyes"; then
+- case " $CXXFLAGS " in
+- *[\ \ ]-Wall[\ \ ]*) ;;
+- *) warnCXXFLAGS="-Wall -Wno-unused" ;;
+- esac
++ rm -rf conftest*
++ ;;
+
+- ## -W is not all that useful. And it cannot be controlled
+- ## with individual -Wno-xxx flags, unlike -Wall
+- if test "x$enable_cxx_warnings" = "xyes"; then
+- warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual"
+- fi
+- fi
+- fi
+- AC_MSG_RESULT($warnCXXFLAGS)
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
++ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++ AC_CHECK_TOOL(AS, as, false)
++ AC_CHECK_TOOL(OBJDUMP, objdump, false)
++ ;;
++ ])
++esac
+
+- AC_ARG_ENABLE(iso-cxx,
+- AC_HELP_STRING([--enable-iso-cxx],
+- [Try to warn if code is not ISO C++ ]),,
+- [enable_iso_cxx=no])
++need_locks="$enable_libtool_lock"
+
+- AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler)
+- complCXXFLAGS=
+- if test "x$enable_iso_cxx" != "xno"; then
+- if test "x$GXX" = "xyes"; then
+- case " $CXXFLAGS " in
+- *[\ \ ]-ansi[\ \ ]*) ;;
+- *) complCXXFLAGS="$complCXXFLAGS -ansi" ;;
+- esac
++])# _LT_AC_LOCK
+
+- case " $CXXFLAGS " in
+- *[\ \ ]-pedantic[\ \ ]*) ;;
+- *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;;
+- esac
++
++# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
++[AC_REQUIRE([LT_AC_PROG_SED])
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ lt_compiler_flag="$3"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ # The option is referenced via a variable to avoid confusing sed.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>conftest.err)
++ ac_status=$?
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s "$ac_outfile"; then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings other than the usual output.
++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
+ fi
+ fi
+- AC_MSG_RESULT($complCXXFLAGS)
+-
+- WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS"
+- AC_SUBST(WARN_CXXFLAGS)
++ $rm conftest*
+ ])
+
+-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+-
+-# serial 52 AC_PROG_LIBTOOL
+-
+-
+-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+-# -----------------------------------------------------------
+-# If this macro is not defined by Autoconf, define it here.
+-m4_ifdef([AC_PROVIDE_IFELSE],
+- [],
+- [m4_define([AC_PROVIDE_IFELSE],
+- [m4_ifdef([AC_PROVIDE_$1],
+- [$2], [$3])])])
++if test x"[$]$2" = xyes; then
++ ifelse([$5], , :, [$5])
++else
++ ifelse([$6], , :, [$6])
++fi
++])# AC_LIBTOOL_COMPILER_OPTION
+
+
+-# AC_PROG_LIBTOOL
+-# ---------------
+-AC_DEFUN([AC_PROG_LIBTOOL],
+-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+- AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [AC_LIBTOOL_CXX],
+- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+- ])])
+-dnl And a similar setup for Fortran 77 support
+- AC_PROVIDE_IFELSE([AC_PROG_F77],
+- [AC_LIBTOOL_F77],
+- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+-])])
+-
+-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+- [AC_LIBTOOL_GCJ],
+- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+- [AC_LIBTOOL_GCJ],
+- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+- [AC_LIBTOOL_GCJ],
+- [ifdef([AC_PROG_GCJ],
+- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+- ifdef([A][M_PROG_GCJ],
+- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+- ifdef([LT_AC_PROG_GCJ],
+- [define([LT_AC_PROG_GCJ],
+- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+-])])# AC_PROG_LIBTOOL
++# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [ACTION-SUCCESS], [ACTION-FAILURE])
++# ------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS $3"
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++ # The linker can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ if test -s conftest.err; then
++ # Append any errors to the config.log.
++ cat conftest.err 1>&AS_MESSAGE_LOG_FD
++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ else
++ $2=yes
++ fi
++ fi
++ $rm -r conftest*
++ LDFLAGS="$save_LDFLAGS"
++])
+
++if test x"[$]$2" = xyes; then
++ ifelse([$4], , :, [$4])
++else
++ ifelse([$5], , :, [$5])
++fi
++])# AC_LIBTOOL_LINKER_OPTION
+
+-# _AC_PROG_LIBTOOL
+-# ----------------
+-AC_DEFUN([_AC_PROG_LIBTOOL],
+-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
++# AC_LIBTOOL_SYS_MAX_CMD_LEN
++# --------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
++[# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++ i=0
++ teststring="ABCD"
+
+-# Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
++ case $build_os in
++ msdosdjgpp*)
++ # On DJGPP, this test can blow up pretty badly due to problems in libc
++ # (any single argument exceeding 2000 bytes causes a buffer overrun
++ # during glob expansion). Even if it were fixed, the result of this
++ # check would be larger than it should be.
++ lt_cv_sys_max_cmd_len=12288; # 12K is about right
++ ;;
+
+-# Prevent multiple expansion
+-define([AC_PROG_LIBTOOL], [])
+-])# _AC_PROG_LIBTOOL
++ gnu*)
++ # Under GNU Hurd, this test is not required because there is
++ # no limit to the length of command line arguments.
++ # Libtool will interpret -1 as no limit whatsoever
++ lt_cv_sys_max_cmd_len=-1;
++ ;;
+
++ cygwin* | mingw*)
++ # On Win9x/ME, this test blows up -- it succeeds, but takes
++ # about 5 minutes as the teststring grows exponentially.
++ # Worse, since 9x/ME are not pre-emptively multitasking,
++ # you end up with a "frozen" computer, even though with patience
++ # the test eventually succeeds (with a max line length of 256k).
++ # Instead, let's just punt: use the minimum linelength reported by
++ # all of the supported platforms: 8192 (on NT/2K/XP).
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
+
+-# AC_LIBTOOL_SETUP
+-# ----------------
+-AC_DEFUN([AC_LIBTOOL_SETUP],
+-[AC_PREREQ(2.50)dnl
+-AC_REQUIRE([AC_ENABLE_SHARED])dnl
+-AC_REQUIRE([AC_ENABLE_STATIC])dnl
+-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_PROG_LD])dnl
+-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+-AC_REQUIRE([AC_PROG_NM])dnl
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
+
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+-AC_REQUIRE([AC_OBJEXT])dnl
+-AC_REQUIRE([AC_EXEEXT])dnl
+-dnl
+-AC_LIBTOOL_SYS_MAX_CMD_LEN
+-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+-AC_LIBTOOL_OBJDIR
++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++ # This has been around since 386BSD, at least. Likely further.
++ if test -x /sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++ elif test -x /usr/sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++ else
++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ fi
++ # And add a safety zone
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ ;;
+
+-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+-_LT_AC_PROG_ECHO_BACKSLASH
++ interix*)
++ # We know the value 262144 and hardcode it with a safety zone (like BSD)
++ lt_cv_sys_max_cmd_len=196608
++ ;;
+
+-case $host_os in
+-aix3*)
+- # AIX sometimes has problems with the GCC collect2 program. For some
+- # reason, if we set the COLLECT_NAMES environment variable, the problems
+- # vanish in a puff of smoke.
+- if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+- fi
+- ;;
+-esac
++ osf*)
++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++ # nice to cause kernel panics so lets avoid the loop below.
++ # First set a reasonable default.
++ lt_cv_sys_max_cmd_len=16384
++ #
++ if test -x /sbin/sysconfig; then
++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++ *1*) lt_cv_sys_max_cmd_len=-1 ;;
++ esac
++ fi
++ ;;
++ sco3.2v5*)
++ lt_cv_sys_max_cmd_len=102400
++ ;;
++ sysv5* | sco5v6* | sysv4.2uw2*)
++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++ if test -n "$kargmax"; then
++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
++ else
++ lt_cv_sys_max_cmd_len=32768
++ fi
++ ;;
++ *)
++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++ if test -n "$lt_cv_sys_max_cmd_len"; then
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ else
++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
++ = "XX$teststring") >/dev/null 2>&1 &&
++ new_result=`expr "X$teststring" : ".*" 2>&1` &&
++ lt_cv_sys_max_cmd_len=$new_result &&
++ test $i != 17 # 1/2 MB should be enough
++ do
++ i=`expr $i + 1`
++ teststring=$teststring$teststring
++ done
++ teststring=
++ # Add a significant safety factor because C++ compilers can tack on massive
++ # amounts of additional arguments before passing them to the linker.
++ # It appears as though 1/2 is a usable value.
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ fi
++ ;;
++ esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++ AC_MSG_RESULT(none)
++fi
++])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
+-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+-# Same as above, but do not quote variable references.
+-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
++# _LT_AC_CHECK_DLFCN
++# ------------------
++AC_DEFUN([_LT_AC_CHECK_DLFCN],
++[AC_CHECK_HEADERS(dlfcn.h)dnl
++])# _LT_AC_CHECK_DLFCN
+
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
++# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ---------------------------------------------------------------------
++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++ [$4]
++else
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<EOF
++[#line __oline__ "configure"
++#include "confdefs.h"
+
+-# Constants:
+-rm="rm -f"
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
+
+-# Global variables:
+-default_ofile=libtool
+-can_build_shared=yes
++#include <stdio.h>
+
+-# All known linkers require a `.a' archive for static linking (except MSVC,
+-# which needs '.lib').
+-libext=a
+-ltmain="$ac_aux_dir/ltmain.sh"
+-ofile="$default_ofile"
+-with_gnu_ld="$lt_cv_prog_gnu_ld"
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
+
+-AC_CHECK_TOOL(AR, ar, false)
+-AC_CHECK_TOOL(RANLIB, ranlib, :)
+-AC_CHECK_TOOL(STRIP, strip, :)
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
+
+-old_CC="$CC"
+-old_CFLAGS="$CFLAGS"
++#ifdef __cplusplus
++extern "C" void exit (int);
++#endif
+
+-# Set sane defaults for various variables
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-test -z "$AS" && AS=as
+-test -z "$CC" && CC=cc
+-test -z "$LTCC" && LTCC=$CC
+-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+-test -z "$DLLTOOL" && DLLTOOL=dlltool
+-test -z "$LD" && LD=ld
+-test -z "$LN_S" && LN_S="ln -s"
+-test -z "$MAGIC_CMD" && MAGIC_CMD=file
+-test -z "$NM" && NM=nm
+-test -z "$SED" && SED=sed
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-test -z "$RANLIB" && RANLIB=:
+-test -z "$STRIP" && STRIP=:
+-test -z "$ac_objext" && ac_objext=o
++void fnord() { int i=42;}
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
+
+-# Determine commands to create old-style static archives.
+-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+-old_postinstall_cmds='chmod 644 $oldlib'
+-old_postuninstall_cmds=
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
+
+-if test -n "$RANLIB"; then
+- case $host_os in
+- openbsd*)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+- ;;
+- *)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+- ;;
+- esac
+- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++ exit (status);
++}]
++EOF
++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) $1 ;;
++ x$lt_dlneed_uscore) $2 ;;
++ x$lt_dlunknown|x*) $3 ;;
++ esac
++ else :
++ # compilation failed
++ $3
++ fi
+ fi
++rm -fr conftest*
++])# _LT_AC_TRY_DLOPEN_SELF
+
+-_LT_CC_BASENAME([$compiler])
+
+-# Only perform the check for file, if the check method requires it
+-case $deplibs_check_method in
+-file_magic*)
+- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- AC_PATH_MAGIC
+- fi
+- ;;
+-esac
++# AC_LIBTOOL_DLOPEN_SELF
++# ----------------------
++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++ enable_dlopen=unknown
++ enable_dlopen_self=unknown
++ enable_dlopen_self_static=unknown
++else
++ lt_cv_dlopen=no
++ lt_cv_dlopen_libs=
+
+-_LT_REQUIRED_DARWIN_CHECKS
++ case $host_os in
++ beos*)
++ lt_cv_dlopen="load_add_on"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ;;
+
+-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+-enable_win32_dll=yes, enable_win32_dll=no)
++ mingw* | pw32*)
++ lt_cv_dlopen="LoadLibrary"
++ lt_cv_dlopen_libs=
++ ;;
+
+-AC_ARG_ENABLE([libtool-lock],
+- [AC_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++ cygwin*)
++ lt_cv_dlopen="dlopen"
++ lt_cv_dlopen_libs=
++ ;;
+
+-AC_ARG_WITH([pic],
+- [AC_HELP_STRING([--with-pic],
+- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+- [pic_mode="$withval"],
+- [pic_mode=default])
+-test -z "$pic_mode" && pic_mode=default
++ darwin*)
++ # if libdl is installed we need to link against it
++ AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++ lt_cv_dlopen="dyld"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ])
++ ;;
+
+-# Use C for the default configuration in the libtool script
+-tagname=
+-AC_LIBTOOL_LANG_C_CONFIG
+-_LT_AC_TAGCONFIG
+-])# AC_LIBTOOL_SETUP
++ *)
++ AC_CHECK_FUNC([shl_load],
++ [lt_cv_dlopen="shl_load"],
++ [AC_CHECK_LIB([dld], [shl_load],
++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
++ [AC_CHECK_FUNC([dlopen],
++ [lt_cv_dlopen="dlopen"],
++ [AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++ [AC_CHECK_LIB([svld], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++ [AC_CHECK_LIB([dld], [dld_link],
++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
++ ])
++ ])
++ ])
++ ])
++ ])
++ ;;
++ esac
+
++ if test "x$lt_cv_dlopen" != xno; then
++ enable_dlopen=yes
++ else
++ enable_dlopen=no
++ fi
+
+-# _LT_AC_SYS_COMPILER
+-# -------------------
+-AC_DEFUN([_LT_AC_SYS_COMPILER],
+-[AC_REQUIRE([AC_PROG_CC])dnl
++ case $lt_cv_dlopen in
++ dlopen)
++ save_CPPFLAGS="$CPPFLAGS"
++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+-# If no C compiler was specified, use CC.
+-LTCC=${LTCC-"$CC"}
++ save_LDFLAGS="$LDFLAGS"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+-# If no C compiler flags were specified, use CFLAGS.
+-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++ save_LIBS="$LIBS"
++ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+-# Allow CC to be a program name with arguments.
+-compiler=$CC
+-])# _LT_AC_SYS_COMPILER
++ AC_CACHE_CHECK([whether a program can dlopen itself],
++ lt_cv_dlopen_self, [dnl
++ _LT_AC_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++ ])
+
++ if test "x$lt_cv_dlopen_self" = xyes; then
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++ lt_cv_dlopen_self_static, [dnl
++ _LT_AC_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
++ ])
++ fi
+
+-# _LT_CC_BASENAME(CC)
+-# -------------------
+-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+-AC_DEFUN([_LT_CC_BASENAME],
+-[for cc_temp in $1""; do
+- case $cc_temp in
+- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+- \-*) ;;
+- *) break;;
++ CPPFLAGS="$save_CPPFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++ LIBS="$save_LIBS"
++ ;;
+ esac
+-done
+-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+-])
+
++ case $lt_cv_dlopen_self in
++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++ *) enable_dlopen_self=unknown ;;
++ esac
+
+-# _LT_COMPILER_BOILERPLATE
+-# ------------------------
+-# Check for compiler boilerplate output or warnings with
+-# the simple compiler test code.
+-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_compiler_boilerplate=`cat conftest.err`
+-$rm conftest*
+-])# _LT_COMPILER_BOILERPLATE
++ case $lt_cv_dlopen_self_static in
++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++ *) enable_dlopen_self_static=unknown ;;
++ esac
++fi
++])# AC_LIBTOOL_DLOPEN_SELF
+
+
+-# _LT_LINKER_BOILERPLATE
+-# ----------------------
+-# Check for linker boilerplate output or warnings with
+-# the simple link test code.
+-AC_DEFUN([_LT_LINKER_BOILERPLATE],
++# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
++# ---------------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler
++AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+ [AC_REQUIRE([LT_AC_PROG_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_linker_boilerplate=`cat conftest.err`
+-$rm -r conftest*
+-])# _LT_LINKER_BOILERPLATE
+-
+-# _LT_REQUIRED_DARWIN_CHECKS
+-# --------------------------
+-# Check for some things on darwin
+-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+- case $host_os in
+- rhapsody* | darwin*)
+- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++ $rm -r conftest 2>/dev/null
++ mkdir conftest
++ cd conftest
++ mkdir out
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+- [lt_cv_apple_cc_single_mod=no
+- if test -z "${LT_MULTI_MODULE}"; then
+- # By default we will add the -single_module flag. You can override
+- # by either setting the environment variable LT_MULTI_MODULE
+- # non-empty at configure time, or by adding -multi_module to the
+- # link flags.
+- echo "int foo(void){return 1;}" > conftest.c
+- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+- -dynamiclib ${wl}-single_module conftest.c
+- if test -f libconftest.dylib; then
+- lt_cv_apple_cc_single_mod=yes
+- rm -rf libconftest.dylib*
++ lt_compiler_flag="-o out/conftest2.$ac_objext"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>out/conftest.err)
++ ac_status=$?
++ cat out/conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s out/conftest2.$ac_objext
++ then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++ fi
+ fi
+- rm conftest.c
+- fi])
+- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+- [lt_cv_ld_exported_symbols_list],
+- [lt_cv_ld_exported_symbols_list=no
+- save_LDFLAGS=$LDFLAGS
+- echo "_main" > conftest.sym
+- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [lt_cv_ld_exported_symbols_list=yes],
+- [lt_cv_ld_exported_symbols_list=no])
+- LDFLAGS="$save_LDFLAGS"
+- ])
+- case $host_os in
+- rhapsody* | darwin1.[[0123]])
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+- darwin1.*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- darwin*)
+- # if running on 10.5 or later, the deployment target defaults
+- # to the OS version, if on x86, and 10.4, the deployment
+- # target defaults to 10.4. Don't you love it?
+- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- 10.[[012]]*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- 10.*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- esac
+- ;;
+- esac
+- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+- _lt_dar_single_mod='$single_module'
+- fi
+- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+- else
+- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+- fi
+- if test "$DSYMUTIL" != ":"; then
+- _lt_dsymutil="~$DSYMUTIL \$lib || :"
+- else
+- _lt_dsymutil=
+- fi
+- ;;
+- esac
++ chmod u+w . 2>&AS_MESSAGE_LOG_FD
++ $rm conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++ $rm out/* && rmdir out
++ cd ..
++ rmdir conftest
++ $rm conftest*
+ ])
++])# AC_LIBTOOL_PROG_CC_C_O
+
+-# _LT_AC_SYS_LIBPATH_AIX
+-# ----------------------
+-# Links a minimal program and checks the executable
+-# for the system default hardcoded library path. In most cases,
+-# this is /usr/lib:/lib, but when the MPI compilers are used
+-# the location of the communication and MPI libs are included too.
+-# If we don't find anything, use the default library path according
+-# to the aix ld manual.
+-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+-])# _LT_AC_SYS_LIBPATH_AIX
+-
+-
+-# _LT_AC_SHELL_INIT(ARG)
+-# ----------------------
+-AC_DEFUN([_LT_AC_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_AC_SHELL_INIT
+
++# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
++# -----------------------------------------
++# Check to see if we can do hard links to lock some files if needed
++AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
++[AC_REQUIRE([_LT_AC_LOCK])dnl
+
+-# _LT_AC_PROG_ECHO_BACKSLASH
+-# --------------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
+-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+-[_LT_AC_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
++hard_links="nottested"
++if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++ # do not overwrite the value of need_locks provided by the user
++ AC_MSG_CHECKING([if we can lock with hard links])
++ hard_links=yes
++ $rm conftest*
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ touch conftest.a
++ ln conftest.a conftest.b 2>&5 || hard_links=no
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ AC_MSG_RESULT([$hard_links])
++ if test "$hard_links" = no; then
++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++ need_locks=warn
++ fi
++else
++ need_locks=no
++fi
++])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+-case X$ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
+
+-echo=${ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $echo works!
+- :
++# AC_LIBTOOL_OBJDIR
++# -----------------
++AC_DEFUN([AC_LIBTOOL_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++ lt_cv_objdir=.libs
+ else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++ # MS-DOS does not allow filenames that begin with a dot.
++ lt_cv_objdir=_libs
+ fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++])# AC_LIBTOOL_OBJDIR
+
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<EOF
+-[$]*
+-EOF
+- exit 0
+-fi
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
++# ----------------------------------------------
++# Check hardcoding attributes.
++AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_AC_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+-if test -z "$ECHO"; then
+-if test "X${echo_test_string+set}" != Xset; then
+-# find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+- echo_test_string=`eval $cmd` &&
+- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+- then
+- break
+- fi
+- done
+-fi
+-
+-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
++ # We can hardcode non-existant directories.
++ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
++ # If the only mechanism to avoid hardcoding is shlibpath_var, we
++ # have to relink, otherwise we might link with an installed library
++ # when we should be linking with a yet-to-be-installed one
++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
++ # Linking always hardcodes the temporary library directory.
++ _LT_AC_TAGVAR(hardcode_action, $1)=relink
++ else
++ # We can link without hardcoding, and we can hardcode nonexisting dirs.
++ _LT_AC_TAGVAR(hardcode_action, $1)=immediate
++ fi
+ else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- echo="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
++ # We cannot hardcode anything, or else we can only hardcode existing
++ # directories.
++ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+
+- if test "X$echo" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- echo='print -r'
+- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- echo='printf %s\n'
+- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- echo="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- echo="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
++if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
++ # Fast installation is not supported
++ enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++ test "$enable_shared" = no; then
++ # Fast installation is not necessary
++ enable_fast_install=needless
++fi
++])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
+
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- echo=echo
+- fi
+- fi
+- fi
+- fi
++# AC_LIBTOOL_SYS_LIB_STRIP
++# ------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
++[striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++ AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++ case $host_os in
++ darwin*)
++ if test -n "$STRIP" ; then
++ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
+ fi
++ ;;
++ *)
++ AC_MSG_RESULT([no])
++ ;;
++ esac
+ fi
++])# AC_LIBTOOL_SYS_LIB_STRIP
+
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-ECHO=$echo
+-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
+
+-AC_SUBST(ECHO)
+-])])# _LT_AC_PROG_ECHO_BACKSLASH
++# AC_LIBTOOL_SYS_DYNAMIC_LINKER
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++m4_if($1,[],[
++if test "$GCC" = yes; then
++ case $host_os in
++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++ *) lt_awk_arg="/^libraries:/" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # Ok, now we have the path, separated by spaces, we can step through it
++ # and add multilib dir if necessary.
++ lt_tmp_lt_search_path_spec=
++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++ for lt_sys_path in $lt_search_path_spec; do
++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++ else
++ test -d "$lt_sys_path" && \
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++ fi
++ done
++ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++ lt_foo="";
++ lt_count=0;
++ for (lt_i = NF; lt_i > 0; lt_i--) {
++ if ($lt_i != "" && $lt_i != ".") {
++ if ($lt_i == "..") {
++ lt_count++;
++ } else {
++ if (lt_count == 0) {
++ lt_foo="/" $lt_i lt_foo;
++ } else {
++ lt_count--;
++ }
++ }
++ }
++ }
++ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++ sys_lib_search_path_spec=`echo $lt_search_path_spec`
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
++need_lib_prefix=unknown
++hardcode_into_libs=no
+
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
+
+-# _LT_AC_LOCK
+-# -----------
+-AC_DEFUN([_LT_AC_LOCK],
+-[AC_ARG_ENABLE([libtool-lock],
+- [AC_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++case $host_os in
++aix3*)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++ shlibpath_var=LIBPATH
+
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case $host in
+-ia64-*-hpux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *ELF-32*)
+- HPUX_IA64_MODE="32"
+- ;;
+- *ELF-64*)
+- HPUX_IA64_MODE="64"
+- ;;
+- esac
+- fi
+- rm -rf conftest*
++ # AIX 3 has no versioning support, so we append a major version to the name.
++ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+-*-*-irix6*)
+- # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -melf32bsmip"
+- ;;
+- *N32*)
+- LD="${LD-ld} -melf32bmipn32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -melf64bmip"
+- ;;
+- esac
+- else
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -32"
+- ;;
+- *N32*)
+- LD="${LD-ld} -n32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -64"
++
++aix[[4-9]]*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
++ if test "$host_cpu" = ia64; then
++ # AIX 5 supports IA64
++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ else
++ # With GCC up to 2.95.x, collect2 would create an import file
++ # for dependence libraries. The import file would start with
++ # the line `#! .'. This would cause the generated library to
++ # depend on `.', always an invalid library. This was fixed in
++ # development snapshots of GCC prior to 3.0.
++ case $host_os in
++ aix4 | aix4.[[01]] | aix4.[[01]].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
+ ;;
+ esac
+- fi
++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++ # soname into executable. Probably we can add versioning support to
++ # collect2, so additional links can be useful in future.
++ if test "$aix_use_runtimelinking" = yes; then
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ else
++ # We preserve .a as extension for shared libraries through AIX4.2
++ # and later when we are not doing run time linking.
++ library_names_spec='${libname}${release}.a $libname.a'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ fi
++ shlibpath_var=LIBPATH
+ fi
+- rm -rf conftest*
+ ;;
+
+-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+-s390*-*linux*|sparc*-*linux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *32-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_i386_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_i386"
+- ;;
+- ppc64-*linux*|powerpc64-*linux*)
+- LD="${LD-ld} -m elf32ppclinux"
+- ;;
+- s390x-*linux*)
+- LD="${LD-ld} -m elf_s390"
+- ;;
+- sparc64-*linux*)
+- LD="${LD-ld} -m elf32_sparc"
+- ;;
+- esac
+- ;;
+- *64-bit*)
+- libsuff=64
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_x86_64_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_x86_64"
+- ;;
+- ppc*-*linux*|powerpc*-*linux*)
+- LD="${LD-ld} -m elf64ppc"
+- ;;
+- s390*-*linux*)
+- LD="${LD-ld} -m elf64_s390"
+- ;;
+- sparc*-*linux*)
+- LD="${LD-ld} -m elf64_sparc"
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
++amigaos*)
++ library_names_spec='$libname.ixlibrary $libname.a'
++ # Create ${libname}_ixlibrary.a entries in /sys/libs.
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+
+-*-*-sco3.2v5*)
+- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+- SAVE_CFLAGS="$CFLAGS"
+- CFLAGS="$CFLAGS -belf"
+- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+- [AC_LANG_PUSH(C)
+- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+- AC_LANG_POP])
+- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+- CFLAGS="$SAVE_CFLAGS"
+- fi
++beos*)
++ library_names_spec='${libname}${shared_ext}'
++ dynamic_linker="$host_os ld.so"
++ shlibpath_var=LIBRARY_PATH
+ ;;
+-sparc*-*solaris*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *64-bit*)
+- case $lt_cv_prog_gnu_ld in
+- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+- *)
+- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+- LD="${LD-ld} -64"
+- fi
+- ;;
+- esac
++
++bsdi[[45]]*)
++ version_type=linux
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++ # the default ld.so.conf also contains /usr/contrib/lib and
++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++ # libtool to hard-code these into programs
++ ;;
++
++cygwin* | mingw* | pw32*)
++ version_type=windows
++ shrext_cmds=".dll"
++ need_version=no
++ need_lib_prefix=no
++
++ case $GCC,$host_os in
++ yes,cygwin* | yes,mingw* | yes,pw32*)
++ library_names_spec='$libname.dll.a'
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname~
++ chmod a+x \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $rm \$dlpath'
++ shlibpath_overrides_runpath=yes
++
++ case $host_os in
++ cygwin*)
++ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++ ;;
++ mingw*)
++ # MinGW DLLs use traditional 'lib' prefix
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH printed by
++ # mingw gcc, but we are running on Cygwin. Gcc prints its search
++ # path with ; separators, and with drive letters. We can handle the
++ # drive letters (cygwin fileutils understands them), so leave them,
++ # especially as we might pass files found there to a mingw objdump,
++ # which wouldn't understand a cygwinified path. Ahh.
++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ ;;
++ pw32*)
++ # pw32 DLLs use 'pw' prefix rather than 'lib'
++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+- fi
+- rm -rf conftest*
+- ;;
++ ;;
+
+-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+- AC_CHECK_TOOL(AS, as, false)
+- AC_CHECK_TOOL(OBJDUMP, objdump, false)
++ *)
++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ ;;
++ esac
++ dynamic_linker='Win32 ld.exe'
++ # FIXME: first we should search . and the directory the executable is in
++ shlibpath_var=PATH
+ ;;
+- ])
+-esac
+-
+-need_locks="$enable_libtool_lock"
+
+-])# _LT_AC_LOCK
++darwin* | rhapsody*)
++ dynamic_linker="$host_os dyld"
++ version_type=darwin
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++ soname_spec='${libname}${release}${major}$shared_ext'
++ shlibpath_overrides_runpath=yes
++ shlibpath_var=DYLD_LIBRARY_PATH
++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++ m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++ ;;
+
++dgux*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
+
+-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+-[AC_REQUIRE([LT_AC_PROG_SED])
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+- lt_compiler_flag="$3"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- # The option is referenced via a variable to avoid confusing sed.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>conftest.err)
+- ac_status=$?
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s "$ac_outfile"; then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings other than the usual output.
+- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- fi
+- $rm conftest*
+-])
+-
+-if test x"[$]$2" = xyes; then
+- ifelse([$5], , :, [$5])
+-else
+- ifelse([$6], , :, [$6])
+-fi
+-])# AC_LIBTOOL_COMPILER_OPTION
+-
+-
+-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS $3"
+- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+- # The linker can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- if test -s conftest.err; then
+- # Append any errors to the config.log.
+- cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- else
+- $2=yes
+- fi
+- fi
+- $rm -r conftest*
+- LDFLAGS="$save_LDFLAGS"
+-])
+-
+-if test x"[$]$2" = xyes; then
+- ifelse([$4], , :, [$4])
+-else
+- ifelse([$5], , :, [$5])
+-fi
+-])# AC_LIBTOOL_LINKER_OPTION
+-
+-
+-# AC_LIBTOOL_SYS_MAX_CMD_LEN
+-# --------------------------
+-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+-[# find the maximum length of command line arguments
+-AC_MSG_CHECKING([the maximum length of command line arguments])
+-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+- i=0
+- teststring="ABCD"
++freebsd1*)
++ dynamic_linker=no
++ ;;
+
+- case $build_os in
+- msdosdjgpp*)
+- # On DJGPP, this test can blow up pretty badly due to problems in libc
+- # (any single argument exceeding 2000 bytes causes a buffer overrun
+- # during glob expansion). Even if it were fixed, the result of this
+- # check would be larger than it should be.
+- lt_cv_sys_max_cmd_len=12288; # 12K is about right
++freebsd* | dragonfly*)
++ # DragonFly does not have aout. When/if they implement a new
++ # versioning mechanism, adjust this.
++ if test -x /usr/bin/objformat; then
++ objformat=`/usr/bin/objformat`
++ else
++ case $host_os in
++ freebsd[[123]]*) objformat=aout ;;
++ *) objformat=elf ;;
++ esac
++ fi
++ version_type=freebsd-$objformat
++ case $version_type in
++ freebsd-elf*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ need_version=no
++ need_lib_prefix=no
++ ;;
++ freebsd-*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++ need_version=yes
++ ;;
++ esac
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_os in
++ freebsd2*)
++ shlibpath_overrides_runpath=yes
+ ;;
+-
+- gnu*)
+- # Under GNU Hurd, this test is not required because there is
+- # no limit to the length of command line arguments.
+- # Libtool will interpret -1 as no limit whatsoever
+- lt_cv_sys_max_cmd_len=-1;
++ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
+ ;;
+-
+- cygwin* | mingw*)
+- # On Win9x/ME, this test blows up -- it succeeds, but takes
+- # about 5 minutes as the teststring grows exponentially.
+- # Worse, since 9x/ME are not pre-emptively multitasking,
+- # you end up with a "frozen" computer, even though with patience
+- # the test eventually succeeds (with a max line length of 256k).
+- # Instead, let's just punt: use the minimum linelength reported by
+- # all of the supported platforms: 8192 (on NT/2K/XP).
+- lt_cv_sys_max_cmd_len=8192;
++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
+ ;;
+-
+- amigaos*)
+- # On AmigaOS with pdksh, this test takes hours, literally.
+- # So we just punt and use a minimum line length of 8192.
+- lt_cv_sys_max_cmd_len=8192;
++ *) # from 4.6 on, and DragonFly
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
+ ;;
++ esac
++ ;;
+
+- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+- # This has been around since 386BSD, at least. Likely further.
+- if test -x /sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+- elif test -x /usr/sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++gnu*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ hardcode_into_libs=yes
++ ;;
++
++hpux9* | hpux10* | hpux11*)
++ # Give a soname corresponding to the major version so that dld.sl refuses to
++ # link against other versions.
++ version_type=sunos
++ need_lib_prefix=no
++ need_version=no
++ case $host_cpu in
++ ia64*)
++ shrext_cmds='.so'
++ hardcode_into_libs=yes
++ dynamic_linker="$host_os dld.so"
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ if test "X$HPUX_IA64_MODE" = X32; then
++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+- # And add a safety zone
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+-
+- interix*)
+- # We know the value 262144 and hardcode it with a safety zone (like BSD)
+- lt_cv_sys_max_cmd_len=196608
++ hppa*64*)
++ shrext_cmds='.sl'
++ hardcode_into_libs=yes
++ dynamic_linker="$host_os dld.sl"
++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++ ;;
++ *)
++ shrext_cmds='.sl'
++ dynamic_linker="$host_os dld.sl"
++ shlibpath_var=SHLIB_PATH
++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
++ esac
++ # HP-UX runs *really* slowly unless shared libraries are mode 555.
++ postinstall_cmds='chmod 555 $lib'
++ ;;
+
+- osf*)
+- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+- # nice to cause kernel panics so lets avoid the loop below.
+- # First set a reasonable default.
+- lt_cv_sys_max_cmd_len=16384
+- #
+- if test -x /sbin/sysconfig; then
+- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+- *1*) lt_cv_sys_max_cmd_len=-1 ;;
+- esac
+- fi
+- ;;
+- sco3.2v5*)
+- lt_cv_sys_max_cmd_len=102400
+- ;;
+- sysv5* | sco5v6* | sysv4.2uw2*)
+- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+- if test -n "$kargmax"; then
+- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+- else
+- lt_cv_sys_max_cmd_len=32768
+- fi
+- ;;
+- *)
+- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+- if test -n "$lt_cv_sys_max_cmd_len"; then
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- else
+- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+- = "XX$teststring") >/dev/null 2>&1 &&
+- new_result=`expr "X$teststring" : ".*" 2>&1` &&
+- lt_cv_sys_max_cmd_len=$new_result &&
+- test $i != 17 # 1/2 MB should be enough
+- do
+- i=`expr $i + 1`
+- teststring=$teststring$teststring
+- done
+- teststring=
+- # Add a significant safety factor because C++ compilers can tack on massive
+- # amounts of additional arguments before passing them to the linker.
+- # It appears as though 1/2 is a usable value.
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+- fi
++interix[[3-9]]*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++irix5* | irix6* | nonstopux*)
++ case $host_os in
++ nonstopux*) version_type=nonstopux ;;
++ *)
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ version_type=linux
++ else
++ version_type=irix
++ fi ;;
++ esac
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++ case $host_os in
++ irix5* | nonstopux*)
++ libsuff= shlibsuff=
++ ;;
++ *)
++ case $LD in # libtool.m4 will add one of these switches to LD
++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++ libsuff= shlibsuff= libmagic=32-bit;;
++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++ libsuff=32 shlibsuff=N32 libmagic=N32;;
++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++ libsuff=64 shlibsuff=64 libmagic=64-bit;;
++ *) libsuff= shlibsuff= libmagic=never-match;;
++ esac
+ ;;
+ esac
+-])
+-if test -n $lt_cv_sys_max_cmd_len ; then
+- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+-else
+- AC_MSG_RESULT(none)
+-fi
+-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+-
+-
+-# _LT_AC_CHECK_DLFCN
+-# ------------------
+-AC_DEFUN([_LT_AC_CHECK_DLFCN],
+-[AC_CHECK_HEADERS(dlfcn.h)dnl
+-])# _LT_AC_CHECK_DLFCN
+-
+-
+-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+-# ---------------------------------------------------------------------
+-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+-if test "$cross_compiling" = yes; then :
+- [$4]
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<EOF
+-[#line __oline__ "configure"
+-#include "confdefs.h"
+-
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++ hardcode_into_libs=yes
++ ;;
+
+-#include <stdio.h>
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++ dynamic_linker=no
++ ;;
+
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
++# This must be Linux ELF.
++linux* | k*bsd*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ # This implies no fast_install, which is unacceptable.
++ # Some rework will be needed to allow for fast_install
++ # before this can be enabled.
++ hardcode_into_libs=yes
+
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
++ # Append ld.so.conf contents to the search path
++ if test -f /etc/ld.so.conf; then
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++ fi
+
+-#ifdef __cplusplus
+-extern "C" void exit (int);
+-#endif
++ # We used to test for /lib/ld.so.1 and disable shared libraries on
++ # powerpc, because MkLinux only supported shared libraries with the
++ # GNU dynamic linker. Since this was broken with cross compilers,
++ # most powerpc-linux boxes support dynamic linking these days and
++ # people can always --disable-shared, the test was removed, and we
++ # assume the GNU/Linux dynamic linker is in use.
++ dynamic_linker='GNU/Linux ld.so'
++ ;;
+
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
+
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
++netbsd*)
++ version_type=sunos
++ need_lib_prefix=no
++ need_version=no
++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+- puts (dlerror ());
+-
+- exit (status);
+-}]
+-EOF
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) $1 ;;
+- x$lt_dlneed_uscore) $2 ;;
+- x$lt_dlunknown|x*) $3 ;;
+- esac
+- else :
+- # compilation failed
+- $3
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='NetBSD ld.elf_so'
+ fi
+-fi
+-rm -fr conftest*
+-])# _LT_AC_TRY_DLOPEN_SELF
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
+
++newsos6)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ ;;
+
+-# AC_LIBTOOL_DLOPEN_SELF
+-# ----------------------
+-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+-if test "x$enable_dlopen" != xyes; then
+- enable_dlopen=unknown
+- enable_dlopen_self=unknown
+- enable_dlopen_self_static=unknown
+-else
+- lt_cv_dlopen=no
+- lt_cv_dlopen_libs=
++nto-qnx*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ ;;
+
++openbsd*)
++ version_type=sunos
++ sys_lib_dlsearch_path_spec="/usr/lib"
++ need_lib_prefix=no
++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+- beos*)
+- lt_cv_dlopen="load_add_on"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ;;
+-
+- mingw* | pw32*)
+- lt_cv_dlopen="LoadLibrary"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- cygwin*)
+- lt_cv_dlopen="dlopen"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- darwin*)
+- # if libdl is installed we need to link against it
+- AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+- lt_cv_dlopen="dyld"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ])
+- ;;
+-
+- *)
+- AC_CHECK_FUNC([shl_load],
+- [lt_cv_dlopen="shl_load"],
+- [AC_CHECK_LIB([dld], [shl_load],
+- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+- [AC_CHECK_FUNC([dlopen],
+- [lt_cv_dlopen="dlopen"],
+- [AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+- [AC_CHECK_LIB([svld], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+- [AC_CHECK_LIB([dld], [dld_link],
+- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+- ])
+- ])
+- ])
+- ])
+- ])
+- ;;
++ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++ *) need_version=no ;;
+ esac
+-
+- if test "x$lt_cv_dlopen" != xno; then
+- enable_dlopen=yes
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ case $host_os in
++ openbsd2.[[89]] | openbsd2.[[89]].*)
++ shlibpath_overrides_runpath=no
++ ;;
++ *)
++ shlibpath_overrides_runpath=yes
++ ;;
++ esac
+ else
+- enable_dlopen=no
++ shlibpath_overrides_runpath=yes
+ fi
++ ;;
+
+- case $lt_cv_dlopen in
+- dlopen)
+- save_CPPFLAGS="$CPPFLAGS"
+- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++os2*)
++ libname_spec='$name'
++ shrext_cmds=".dll"
++ need_lib_prefix=no
++ library_names_spec='$libname${shared_ext} $libname.a'
++ dynamic_linker='OS/2 ld.exe'
++ shlibpath_var=LIBPATH
++ ;;
+
+- save_LDFLAGS="$LDFLAGS"
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++osf3* | osf4* | osf5*)
++ version_type=osf
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ ;;
+
+- save_LIBS="$LIBS"
+- LIBS="$lt_cv_dlopen_libs $LIBS"
++rdos*)
++ dynamic_linker=no
++ ;;
+
+- AC_CACHE_CHECK([whether a program can dlopen itself],
+- lt_cv_dlopen_self, [dnl
+- _LT_AC_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+- ])
++solaris*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ # ldd complains unless libraries are executable
++ postinstall_cmds='chmod +x $lib'
++ ;;
+
+- if test "x$lt_cv_dlopen_self" = xyes; then
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+- lt_cv_dlopen_self_static, [dnl
+- _LT_AC_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+- ])
+- fi
++sunos4*)
++ version_type=sunos
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ if test "$with_gnu_ld" = yes; then
++ need_lib_prefix=no
++ fi
++ need_version=yes
++ ;;
+
+- CPPFLAGS="$save_CPPFLAGS"
+- LDFLAGS="$save_LDFLAGS"
+- LIBS="$save_LIBS"
+- ;;
++sysv4 | sysv4.3*)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_vendor in
++ sni)
++ shlibpath_overrides_runpath=no
++ need_lib_prefix=no
++ export_dynamic_flag_spec='${wl}-Blargedynsym'
++ runpath_var=LD_RUN_PATH
++ ;;
++ siemens)
++ need_lib_prefix=no
++ ;;
++ motorola)
++ need_lib_prefix=no
++ need_version=no
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++ ;;
+ esac
++ ;;
+
+- case $lt_cv_dlopen_self in
+- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+- *) enable_dlopen_self=unknown ;;
+- esac
++sysv4*MP*)
++ if test -d /usr/nec ;then
++ version_type=linux
++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++ soname_spec='$libname${shared_ext}.$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ fi
++ ;;
+
+- case $lt_cv_dlopen_self_static in
+- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+- *) enable_dlopen_self_static=unknown ;;
+- esac
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ version_type=freebsd-elf
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ hardcode_into_libs=yes
++ if test "$with_gnu_ld" = yes; then
++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++ shlibpath_overrides_runpath=no
++ else
++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++ shlibpath_overrides_runpath=yes
++ case $host_os in
++ sco3.2v5*)
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++ ;;
++ esac
++ fi
++ sys_lib_dlsearch_path_spec='/usr/lib'
++ ;;
++
++uts4*)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
++
++*)
++ dynamic_linker=no
++ ;;
++esac
++AC_MSG_RESULT([$dynamic_linker])
++test "$dynamic_linker" = no && can_build_shared=no
++
++AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
++[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
++AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
++[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+ fi
+-])# AC_LIBTOOL_DLOPEN_SELF
++])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+-# ---------------------------------
+-# Check to see if options -c and -o are simultaneously supported by compiler
+-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
++# _LT_AC_TAGCONFIG
++# ----------------
++AC_DEFUN([_LT_AC_TAGCONFIG],
+ [AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+- $rm -r conftest 2>/dev/null
+- mkdir conftest
+- cd conftest
+- mkdir out
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++AC_ARG_WITH([tags],
++ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
++ [include additional configurations @<:@automatic@:>@])],
++ [tagnames="$withval"])
+
+- lt_compiler_flag="-o out/conftest2.$ac_objext"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>out/conftest.err)
+- ac_status=$?
+- cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s out/conftest2.$ac_objext
+- then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+- fi
+- fi
+- chmod u+w . 2>&AS_MESSAGE_LOG_FD
+- $rm conftest*
+- # SGI C++ compiler will create directory out/ii_files/ for
+- # template instantiation
+- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+- $rm out/* && rmdir out
+- cd ..
+- rmdir conftest
+- $rm conftest*
+-])
+-])# AC_LIBTOOL_PROG_CC_C_O
++if test -f "$ltmain" && test -n "$tagnames"; then
++ if test ! -f "${ofile}"; then
++ AC_MSG_WARN([output file `$ofile' does not exist])
++ fi
+
++ if test -z "$LTCC"; then
++ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
++ if test -z "$LTCC"; then
++ AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
++ else
++ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
++ fi
++ fi
++ if test -z "$LTCFLAGS"; then
++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
++ fi
+
+-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+-# -----------------------------------------
+-# Check to see if we can do hard links to lock some files if needed
+-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+-[AC_REQUIRE([_LT_AC_LOCK])dnl
++ # Extract list of available tagged configurations in $ofile.
++ # Note that this assumes the entire list is on one line.
++ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+-hard_links="nottested"
+-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+- # do not overwrite the value of need_locks provided by the user
+- AC_MSG_CHECKING([if we can lock with hard links])
+- hard_links=yes
+- $rm conftest*
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- touch conftest.a
+- ln conftest.a conftest.b 2>&5 || hard_links=no
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- AC_MSG_RESULT([$hard_links])
+- if test "$hard_links" = no; then
+- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+- need_locks=warn
+- fi
+-else
+- need_locks=no
+-fi
+-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for tagname in $tagnames; do
++ IFS="$lt_save_ifs"
++ # Check whether tagname contains only valid characters
++ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
++ "") ;;
++ *) AC_MSG_ERROR([invalid tag name: $tagname])
++ ;;
++ esac
++
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
++ then
++ AC_MSG_ERROR([tag name \"$tagname\" already exists])
++ fi
+
++ # Update the list of available tags.
++ if test -n "$tagname"; then
++ echo appending configuration tag \"$tagname\" to $ofile
+
+-# AC_LIBTOOL_OBJDIR
+-# -----------------
+-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+-[rm -f .libs 2>/dev/null
+-mkdir .libs 2>/dev/null
+-if test -d .libs; then
+- lt_cv_objdir=.libs
+-else
+- # MS-DOS does not allow filenames that begin with a dot.
+- lt_cv_objdir=_libs
+-fi
+-rmdir .libs 2>/dev/null])
+-objdir=$lt_cv_objdir
+-])# AC_LIBTOOL_OBJDIR
++ case $tagname in
++ CXX)
++ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_LIBTOOL_LANG_CXX_CONFIG
++ else
++ tagname=""
++ fi
++ ;;
+
++ F77)
++ if test -n "$F77" && test "X$F77" != "Xno"; then
++ AC_LIBTOOL_LANG_F77_CONFIG
++ else
++ tagname=""
++ fi
++ ;;
+
+-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+-# ----------------------------------------------
+-# Check hardcoding attributes.
+-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+-[AC_MSG_CHECKING([how to hardcode library paths into programs])
+-_LT_AC_TAGVAR(hardcode_action, $1)=
+-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++ GCJ)
++ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
++ AC_LIBTOOL_LANG_GCJ_CONFIG
++ else
++ tagname=""
++ fi
++ ;;
+
+- # We can hardcode non-existant directories.
+- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+- # If the only mechanism to avoid hardcoding is shlibpath_var, we
+- # have to relink, otherwise we might link with an installed library
+- # when we should be linking with a yet-to-be-installed one
+- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+- # Linking always hardcodes the temporary library directory.
+- _LT_AC_TAGVAR(hardcode_action, $1)=relink
++ RC)
++ AC_LIBTOOL_LANG_RC_CONFIG
++ ;;
++
++ *)
++ AC_MSG_ERROR([Unsupported tag name: $tagname])
++ ;;
++ esac
++
++ # Append the new tag name to the list of available tags.
++ if test -n "$tagname" ; then
++ available_tags="$available_tags $tagname"
++ fi
++ fi
++ done
++ IFS="$lt_save_ifs"
++
++ # Now substitute the updated list of available tags.
++ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
++ mv "${ofile}T" "$ofile"
++ chmod +x "$ofile"
+ else
+- # We can link without hardcoding, and we can hardcode nonexisting dirs.
+- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
++ rm -f "${ofile}T"
++ AC_MSG_ERROR([unable to update list of available tagged configurations.])
+ fi
+-else
+- # We cannot hardcode anything, or else we can only hardcode existing
+- # directories.
+- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+ fi
+-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
++])# _LT_AC_TAGCONFIG
+
+-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+- # Fast installation is not supported
+- enable_fast_install=no
+-elif test "$shlibpath_overrides_runpath" = yes ||
+- test "$enable_shared" = no; then
+- # Fast installation is not necessary
+- enable_fast_install=needless
+-fi
+-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
++# AC_LIBTOOL_DLOPEN
++# -----------------
++# enable checks for dlopen support
++AC_DEFUN([AC_LIBTOOL_DLOPEN],
++ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
++])# AC_LIBTOOL_DLOPEN
+
+-# AC_LIBTOOL_SYS_LIB_STRIP
+-# ------------------------
+-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+-[striplib=
+-old_striplib=
+-AC_MSG_CHECKING([whether stripping libraries is possible])
+-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- AC_MSG_RESULT([yes])
+-else
+-# FIXME - insert some real tests, host_os isn't really good enough
+- case $host_os in
+- darwin*)
+- if test -n "$STRIP" ; then
+- striplib="$STRIP -x"
+- old_striplib="$STRIP -S"
+- AC_MSG_RESULT([yes])
+- else
+- AC_MSG_RESULT([no])
+-fi
+- ;;
+- *)
+- AC_MSG_RESULT([no])
+- ;;
+- esac
+-fi
+-])# AC_LIBTOOL_SYS_LIB_STRIP
+
++# AC_LIBTOOL_WIN32_DLL
++# --------------------
++# declare package support for building win32 DLLs
++AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
++[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
++])# AC_LIBTOOL_WIN32_DLL
+
+-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+-# -----------------------------
+-# PORTME Fill in your ld.so characteristics
+-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_MSG_CHECKING([dynamic linker characteristics])
+-library_names_spec=
+-libname_spec='lib$name'
+-soname_spec=
+-shrext_cmds=".so"
+-postinstall_cmds=
+-postuninstall_cmds=
+-finish_cmds=
+-finish_eval=
+-shlibpath_var=
+-shlibpath_overrides_runpath=unknown
+-version_type=none
+-dynamic_linker="$host_os ld.so"
+-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-m4_if($1,[],[
+-if test "$GCC" = yes; then
+- case $host_os in
+- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+- *) lt_awk_arg="/^libraries:/" ;;
+- esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+- # if the path contains ";" then we assume it to be the separator
+- # otherwise default to the standard path separator (i.e. ":") - it is
+- # assumed that no part of a normal pathname contains ";" but that should
+- # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- # Ok, now we have the path, separated by spaces, we can step through it
+- # and add multilib dir if necessary.
+- lt_tmp_lt_search_path_spec=
+- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+- for lt_sys_path in $lt_search_path_spec; do
+- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+- else
+- test -d "$lt_sys_path" && \
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+- fi
+- done
+- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+-BEGIN {RS=" "; FS="/|\n";} {
+- lt_foo="";
+- lt_count=0;
+- for (lt_i = NF; lt_i > 0; lt_i--) {
+- if ($lt_i != "" && $lt_i != ".") {
+- if ($lt_i == "..") {
+- lt_count++;
+- } else {
+- if (lt_count == 0) {
+- lt_foo="/" $lt_i lt_foo;
+- } else {
+- lt_count--;
+- }
+- }
+- }
+- }
+- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+-}'`
+- sys_lib_search_path_spec=`echo $lt_search_path_spec`
+-else
+- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+-fi])
+-need_lib_prefix=unknown
+-hardcode_into_libs=no
+-
+-# when you set need_version to no, make sure it does not cause -set_version
+-# flags to be left without arguments
+-need_version=unknown
+
+-case $host_os in
+-aix3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+- shlibpath_var=LIBPATH
++# AC_ENABLE_SHARED([DEFAULT])
++# ---------------------------
++# implement the --enable-shared flag
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++AC_DEFUN([AC_ENABLE_SHARED],
++[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
++AC_ARG_ENABLE([shared],
++ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
++ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_shared=yes ;;
++ no) enable_shared=no ;;
++ *)
++ enable_shared=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_shared=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
++])# AC_ENABLE_SHARED
+
+- # AIX 3 has no versioning support, so we append a major version to the name.
+- soname_spec='${libname}${release}${shared_ext}$major'
+- ;;
+
+-aix[[4-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- hardcode_into_libs=yes
+- if test "$host_cpu" = ia64; then
+- # AIX 5 supports IA64
+- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- else
+- # With GCC up to 2.95.x, collect2 would create an import file
+- # for dependence libraries. The import file would start with
+- # the line `#! .'. This would cause the generated library to
+- # depend on `.', always an invalid library. This was fixed in
+- # development snapshots of GCC prior to 3.0.
+- case $host_os in
+- aix4 | aix4.[[01]] | aix4.[[01]].*)
+- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+- echo ' yes '
+- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+- :
+- else
+- can_build_shared=no
+- fi
+- ;;
+- esac
+- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+- # soname into executable. Probably we can add versioning support to
+- # collect2, so additional links can be useful in future.
+- if test "$aix_use_runtimelinking" = yes; then
+- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+- # instead of lib<name>.a to let people know that these are not
+- # typical AIX shared libraries.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- else
+- # We preserve .a as extension for shared libraries through AIX4.2
+- # and later when we are not doing run time linking.
+- library_names_spec='${libname}${release}.a $libname.a'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- fi
+- shlibpath_var=LIBPATH
+- fi
+- ;;
++# AC_DISABLE_SHARED
++# -----------------
++# set the default shared flag to --disable-shared
++AC_DEFUN([AC_DISABLE_SHARED],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++AC_ENABLE_SHARED(no)
++])# AC_DISABLE_SHARED
+
+-amigaos*)
+- library_names_spec='$libname.ixlibrary $libname.a'
+- # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+- ;;
+
+-beos*)
+- library_names_spec='${libname}${shared_ext}'
+- dynamic_linker="$host_os ld.so"
+- shlibpath_var=LIBRARY_PATH
+- ;;
++# AC_ENABLE_STATIC([DEFAULT])
++# ---------------------------
++# implement the --enable-static flag
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++AC_DEFUN([AC_ENABLE_STATIC],
++[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
++AC_ARG_ENABLE([static],
++ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
++ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_static=yes ;;
++ no) enable_static=no ;;
++ *)
++ enable_static=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_static=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_static=]AC_ENABLE_STATIC_DEFAULT)
++])# AC_ENABLE_STATIC
+
+-bsdi[[45]]*)
+- version_type=linux
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+- # the default ld.so.conf also contains /usr/contrib/lib and
+- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+- # libtool to hard-code these into programs
+- ;;
+
+-cygwin* | mingw* | pw32*)
+- version_type=windows
+- shrext_cmds=".dll"
+- need_version=no
+- need_lib_prefix=no
++# AC_DISABLE_STATIC
++# -----------------
++# set the default static flag to --disable-static
++AC_DEFUN([AC_DISABLE_STATIC],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++AC_ENABLE_STATIC(no)
++])# AC_DISABLE_STATIC
+
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32*)
+- library_names_spec='$libname.dll.a'
+- # DLL is installed to $(libdir)/../bin by postinstall_cmds
+- postinstall_cmds='base_file=`basename \${file}`~
+- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+- dldir=$destdir/`dirname \$dlpath`~
+- test -d \$dldir || mkdir -p \$dldir~
+- $install_prog $dir/$dlname \$dldir/$dlname~
+- chmod a+x \$dldir/$dlname'
+- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+- dlpath=$dir/\$dldll~
+- $rm \$dlpath'
+- shlibpath_overrides_runpath=yes
+
+- case $host_os in
+- cygwin*)
+- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+- ;;
+- mingw*)
+- # MinGW DLLs use traditional 'lib' prefix
+- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- ;;
+- pw32*)
+- # pw32 DLLs use 'pw' prefix rather than 'lib'
+- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++# AC_ENABLE_FAST_INSTALL([DEFAULT])
++# ---------------------------------
++# implement the --enable-fast-install flag
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++AC_DEFUN([AC_ENABLE_FAST_INSTALL],
++[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
++AC_ARG_ENABLE([fast-install],
++ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
++ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_fast_install=yes ;;
++ no) enable_fast_install=no ;;
++ *)
++ enable_fast_install=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_fast_install=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
+ ;;
+- esac
+- ;;
++ esac],
++ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
++])# AC_ENABLE_FAST_INSTALL
+
+- *)
+- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+- ;;
+- esac
+- dynamic_linker='Win32 ld.exe'
+- # FIXME: first we should search . and the directory the executable is in
+- shlibpath_var=PATH
+- ;;
+
+-darwin* | rhapsody*)
+- dynamic_linker="$host_os dyld"
+- version_type=darwin
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+- soname_spec='${libname}${release}${major}$shared_ext'
+- shlibpath_overrides_runpath=yes
+- shlibpath_var=DYLD_LIBRARY_PATH
+- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+- m4_if([$1], [],[
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+- ;;
++# AC_DISABLE_FAST_INSTALL
++# -----------------------
++# set the default to --disable-fast-install
++AC_DEFUN([AC_DISABLE_FAST_INSTALL],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++AC_ENABLE_FAST_INSTALL(no)
++])# AC_DISABLE_FAST_INSTALL
+
+-dgux*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
++
++# AC_LIBTOOL_PICMODE([MODE])
++# --------------------------
++# implement the --with-pic flag
++# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
++AC_DEFUN([AC_LIBTOOL_PICMODE],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++pic_mode=ifelse($#,1,$1,default)
++])# AC_LIBTOOL_PICMODE
++
++
++# AC_PROG_EGREP
++# -------------
++# This is predefined starting with Autoconf 2.54, so this conditional
++# definition can be removed once we require Autoconf 2.54 or later.
++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
++[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
++ [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
++ then ac_cv_prog_egrep='grep -E'
++ else ac_cv_prog_egrep='egrep'
++ fi])
++ EGREP=$ac_cv_prog_egrep
++ AC_SUBST([EGREP])
++])])
++
++
++# AC_PATH_TOOL_PREFIX
++# -------------------
++# find a file program which can recognize shared library
++AC_DEFUN([AC_PATH_TOOL_PREFIX],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_MSG_CHECKING([for $1])
++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
++[case $MAGIC_CMD in
++[[\\/*] | ?:[\\/]*])
++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
++*)
++ lt_save_MAGIC_CMD="$MAGIC_CMD"
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++dnl $ac_dummy forces splitting on constant user-supplied paths.
++dnl POSIX.2 word splitting is done only on the output of word expansions,
++dnl not every word. This closes a longstanding sh security hole.
++ ac_dummy="ifelse([$2], , $PATH, [$2])"
++ for ac_dir in $ac_dummy; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f $ac_dir/$1; then
++ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
++ if test -n "$file_magic_test_file"; then
++ case $deplibs_check_method in
++ "file_magic "*)
++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++ $EGREP "$file_magic_regex" > /dev/null; then
++ :
++ else
++ cat <<EOF 1>&2
+
+-freebsd1*)
+- dynamic_linker=no
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such. This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem. Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool at gnu.org
++
++EOF
++ fi ;;
++ esac
++ fi
++ break
++ fi
++ done
++ IFS="$lt_save_ifs"
++ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
++esac])
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++ AC_MSG_RESULT($MAGIC_CMD)
++else
++ AC_MSG_RESULT(no)
++fi
++])# AC_PATH_TOOL_PREFIX
+
+-freebsd* | dragonfly*)
+- # DragonFly does not have aout. When/if they implement a new
+- # versioning mechanism, adjust this.
+- if test -x /usr/bin/objformat; then
+- objformat=`/usr/bin/objformat`
++
++# AC_PATH_MAGIC
++# -------------
++# find a file program which can recognize a shared library
++AC_DEFUN([AC_PATH_MAGIC],
++[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++ if test -n "$ac_tool_prefix"; then
++ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+- case $host_os in
+- freebsd[[123]]*) objformat=aout ;;
+- *) objformat=elf ;;
+- esac
++ MAGIC_CMD=:
+ fi
+- version_type=freebsd-$objformat
+- case $version_type in
+- freebsd-elf*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- need_version=no
+- need_lib_prefix=no
+- ;;
+- freebsd-*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+- need_version=yes
+- ;;
++fi
++])# AC_PATH_MAGIC
++
++
++# AC_PROG_LD
++# ----------
++# find the pathname to the GNU or non-GNU linker
++AC_DEFUN([AC_PROG_LD],
++[AC_ARG_WITH([gnu-ld],
++ [AC_HELP_STRING([--with-gnu-ld],
++ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
++ [test "$withval" = no || with_gnu_ld=yes],
++ [with_gnu_ld=no])
++AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++ac_prog=ld
++if test "$GCC" = yes; then
++ # Check if gcc -print-prog-name=ld gives a path.
++ AC_MSG_CHECKING([for ld used by $CC])
++ case $host in
++ *-*-mingw*)
++ # gcc leaves a trailing carriage return which upsets mingw
++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++ *)
++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_os in
+- freebsd2*)
+- shlibpath_overrides_runpath=yes
+- ;;
+- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
++ case $ac_prog in
++ # Accept absolute paths.
++ [[\\/]]* | ?:[[\\/]]*)
++ re_direlt='/[[^/]][[^/]]*/\.\./'
++ # Canonicalize the pathname of ld
++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
++ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
++ done
++ test -z "$LD" && LD="$ac_prog"
++ ;;
++ "")
++ # If it fails, then pretend we aren't using GCC.
++ ac_prog=ld
+ ;;
+- *) # from 4.6 on, and DragonFly
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
++ *)
++ # If it is relative, then search for the first ld in PATH.
++ with_gnu_ld=unknown
+ ;;
+ esac
+- ;;
++elif test "$with_gnu_ld" = yes; then
++ AC_MSG_CHECKING([for GNU ld])
++else
++ AC_MSG_CHECKING([for non-GNU ld])
++fi
++AC_CACHE_VAL(lt_cv_path_LD,
++[if test -z "$LD"; then
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++ lt_cv_path_LD="$ac_dir/$ac_prog"
++ # Check to see if the program is GNU ld. I'd rather use --version,
++ # but apparently some variants of GNU ld only accept -v.
++ # Break only if it was the GNU/non-GNU ld that we prefer.
++ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++ *GNU* | *'with BFD'*)
++ test "$with_gnu_ld" != no && break
++ ;;
++ *)
++ test "$with_gnu_ld" != yes && break
++ ;;
++ esac
++ fi
++ done
++ IFS="$lt_save_ifs"
++else
++ lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi])
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++ AC_MSG_RESULT($LD)
++else
++ AC_MSG_RESULT(no)
++fi
++test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
++AC_PROG_LD_GNU
++])# AC_PROG_LD
+
+-gnu*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- hardcode_into_libs=yes
+- ;;
+
+-hpux9* | hpux10* | hpux11*)
+- # Give a soname corresponding to the major version so that dld.sl refuses to
+- # link against other versions.
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- case $host_cpu in
+- ia64*)
+- shrext_cmds='.so'
+- hardcode_into_libs=yes
+- dynamic_linker="$host_os dld.so"
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- if test "X$HPUX_IA64_MODE" = X32; then
+- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++# AC_PROG_LD_GNU
++# --------------
++AC_DEFUN([AC_PROG_LD_GNU],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++ lt_cv_prog_gnu_ld=yes
++ ;;
++*)
++ lt_cv_prog_gnu_ld=no
++ ;;
++esac])
++with_gnu_ld=$lt_cv_prog_gnu_ld
++])# AC_PROG_LD_GNU
++
++
++# AC_PROG_LD_RELOAD_FLAG
++# ----------------------
++# find reload flag for linker
++# -- PORTME Some linkers may need a different reload flag.
++AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
++[AC_CACHE_CHECK([for $LD option to reload object files],
++ lt_cv_ld_reload_flag,
++ [lt_cv_ld_reload_flag='-r'])
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++ darwin*)
++ if test "$GCC" = yes; then
++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+- ;;
+- hppa*64*)
+- shrext_cmds='.sl'
+- hardcode_into_libs=yes
+- dynamic_linker="$host_os dld.sl"
+- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+- ;;
+- *)
+- shrext_cmds='.sl'
+- dynamic_linker="$host_os dld.sl"
+- shlibpath_var=SHLIB_PATH
+- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+- esac
+- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+- postinstall_cmds='chmod 555 $lib'
+- ;;
++esac
++])# AC_PROG_LD_RELOAD_FLAG
+
+-interix[[3-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
++
++# AC_DEPLIBS_CHECK_METHOD
++# -----------------------
++# how to check for library dependencies
++# -- PORTME fill in with the dynamic library characteristics
++AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
++[AC_CACHE_CHECK([how to recognize dependent libraries],
++lt_cv_deplibs_check_method,
++[lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix[[4-9]]*)
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-irix5* | irix6* | nonstopux*)
+- case $host_os in
+- nonstopux*) version_type=nonstopux ;;
+- *)
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- version_type=linux
+- else
+- version_type=irix
+- fi ;;
+- esac
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+- case $host_os in
+- irix5* | nonstopux*)
+- libsuff= shlibsuff=
+- ;;
+- *)
+- case $LD in # libtool.m4 will add one of these switches to LD
+- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+- libsuff= shlibsuff= libmagic=32-bit;;
+- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+- libsuff=32 shlibsuff=N32 libmagic=N32;;
+- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+- libsuff=64 shlibsuff=64 libmagic=64-bit;;
+- *) libsuff= shlibsuff= libmagic=never-match;;
+- esac
+- ;;
+- esac
+- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+- hardcode_into_libs=yes
++beos*)
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-# No shared lib support for Linux oldld, aout, or coff.
+-linux*oldld* | linux*aout* | linux*coff*)
+- dynamic_linker=no
++bsdi[[45]]*)
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
++ lt_cv_file_magic_cmd='/usr/bin/file -L'
++ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- # This implies no fast_install, which is unacceptable.
+- # Some rework will be needed to allow for fast_install
+- # before this can be enabled.
+- hardcode_into_libs=yes
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++cygwin*)
++ # func_win32_libid is a shell function defined in ltmain.sh
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ ;;
+
+- # Append ld.so.conf contents to the search path
+- if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++mingw* | pw32*)
++ # Base MSYS/MinGW do not provide the 'file' command needed by
++ # func_win32_libid shell function, so use a weaker test based on 'objdump',
++ # unless we find 'file', for example because we are cross-compiling.
++ if ( file / ) >/dev/null 2>&1; then
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ else
++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
++ ;;
+
+- # We used to test for /lib/ld.so.1 and disable shared libraries on
+- # powerpc, because MkLinux only supported shared libraries with the
+- # GNU dynamic linker. Since this was broken with cross compilers,
+- # most powerpc-linux boxes support dynamic linking these days and
+- # people can always --disable-shared, the test was removed, and we
+- # assume the GNU/Linux dynamic linker is in use.
+- dynamic_linker='GNU/Linux ld.so'
++darwin* | rhapsody*)
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd*)
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- dynamic_linker='NetBSD (a.out) ld.so'
++freebsd* | dragonfly*)
++ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
++ case $host_cpu in
++ i*86 )
++ # Not sure whether the presence of OpenBSD here was a mistake.
++ # Let's accept both of them until this is cleared up.
++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++ ;;
++ esac
+ else
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='NetBSD ld.elf_so'
++ lt_cv_deplibs_check_method=pass_all
+ fi
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+ ;;
+
+-newsos6)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
++gnu*)
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-nto-qnx*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
++hpux10.20* | hpux11*)
++ lt_cv_file_magic_cmd=/usr/bin/file
++ case $host_cpu in
++ ia64*)
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++ ;;
++ hppa*64*)
++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++ ;;
++ *)
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++ lt_cv_file_magic_test_file=/usr/lib/libc.sl
++ ;;
++ esac
+ ;;
+
+-openbsd*)
+- version_type=sunos
+- sys_lib_dlsearch_path_spec="/usr/lib"
+- need_lib_prefix=no
+- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+- case $host_os in
+- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+- *) need_version=no ;;
++interix[[3-9]]*)
++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
++ ;;
++
++irix5* | irix6* | nonstopux*)
++ case $LD in
++ *-32|*"-32 ") libmagic=32-bit;;
++ *-n32|*"-n32 ") libmagic=N32;;
++ *-64|*"-64 ") libmagic=64-bit;;
++ *) libmagic=never-match;;
+ esac
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- case $host_os in
+- openbsd2.[[89]] | openbsd2.[[89]].*)
+- shlibpath_overrides_runpath=no
+- ;;
+- *)
+- shlibpath_overrides_runpath=yes
+- ;;
+- esac
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++# This must be Linux ELF.
++linux* | k*bsd*-gnu)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+- shlibpath_overrides_runpath=yes
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+-os2*)
+- libname_spec='$name'
+- shrext_cmds=".dll"
+- need_lib_prefix=no
+- library_names_spec='$libname${shared_ext} $libname.a'
+- dynamic_linker='OS/2 ld.exe'
+- shlibpath_var=LIBPATH
++newos6*)
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=/usr/lib/libnls.so
++ ;;
++
++nto-qnx*)
++ lt_cv_deplibs_check_method=unknown
++ ;;
++
++openbsd*)
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
++ else
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+- version_type=osf
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ rdos*)
+- dynamic_linker=no
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ solaris*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- # ldd complains unless libraries are executable
+- postinstall_cmds='chmod +x $lib'
+- ;;
+-
+-sunos4*)
+- version_type=sunos
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- if test "$with_gnu_ld" = yes; then
+- need_lib_prefix=no
+- fi
+- need_version=yes
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ sysv4 | sysv4.3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+- sni)
+- shlibpath_overrides_runpath=no
+- need_lib_prefix=no
+- export_dynamic_flag_spec='${wl}-Blargedynsym'
+- runpath_var=LD_RUN_PATH
+- ;;
+- siemens)
+- need_lib_prefix=no
+- ;;
+- motorola)
+- need_lib_prefix=no
+- need_version=no
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+- ;;
++ motorola)
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++ ;;
++ ncr)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ sequent)
++ lt_cv_file_magic_cmd='/bin/file'
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
++ ;;
++ sni)
++ lt_cv_file_magic_cmd='/bin/file'
++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
++ lt_cv_file_magic_test_file=/lib/libc.so
++ ;;
++ siemens)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ pc)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
+ esac
+ ;;
+
+-sysv4*MP*)
+- if test -d /usr/nec ;then
+- version_type=linux
+- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+- soname_spec='$libname${shared_ext}.$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- fi
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ lt_cv_deplibs_check_method=pass_all
+ ;;
++esac
++])
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++])# AC_DEPLIBS_CHECK_METHOD
+
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- version_type=freebsd-elf
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- hardcode_into_libs=yes
+- if test "$with_gnu_ld" = yes; then
+- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+- shlibpath_overrides_runpath=no
+- else
+- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+- shlibpath_overrides_runpath=yes
+- case $host_os in
+- sco3.2v5*)
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+- ;;
+- esac
++
++# AC_PROG_NM
++# ----------
++# find the pathname to a BSD-compatible name lister
++AC_DEFUN([AC_PROG_NM],
++[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
++[if test -n "$NM"; then
++ # Let the user override the test.
++ lt_cv_path_NM="$NM"
++else
++ lt_nm_to_check="${ac_tool_prefix}nm"
++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+- sys_lib_dlsearch_path_spec='/usr/lib'
+- ;;
++ for lt_tmp_nm in $lt_nm_to_check; do
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ tmp_nm="$ac_dir/$lt_tmp_nm"
++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++ # Check to see if the nm accepts a BSD-compat flag.
++ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
++ # nm: unknown option "B" ignored
++ # Tru64's nm complains that /dev/null is an invalid object file
++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++ */dev/null* | *'Invalid file or object type'*)
++ lt_cv_path_NM="$tmp_nm -B"
++ break
++ ;;
++ *)
++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++ */dev/null*)
++ lt_cv_path_NM="$tmp_nm -p"
++ break
++ ;;
++ *)
++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++ continue # so that we can try to find one that supports BSD flags
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ done
++ IFS="$lt_save_ifs"
++ done
++ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
++fi])
++NM="$lt_cv_path_NM"
++])# AC_PROG_NM
+
+-uts4*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+
++# AC_CHECK_LIBM
++# -------------
++# check for math library
++AC_DEFUN([AC_CHECK_LIBM],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
++ # These system don't have libm, or don't need it
++ ;;
++*-ncr-sysv4.3*)
++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++ ;;
+ *)
+- dynamic_linker=no
++ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+ esac
+-AC_MSG_RESULT([$dynamic_linker])
+-test "$dynamic_linker" = no && can_build_shared=no
++])# AC_CHECK_LIBM
+
+-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
+-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
+-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
+-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
+-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+-
+-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+-if test "$GCC" = yes; then
+- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+-fi
+-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
++# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
++# -----------------------------------
++# sets LIBLTDL to the link flags for the libltdl convenience library and
++# LTDLINCL to the include flags for the libltdl header and adds
++# --enable-ltdl-convenience to the configure arguments. Note that
++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
++# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
++# (note the single quotes!). If your package is not flat and you're not
++# using automake, define top_builddir and top_srcdir appropriately in
++# the Makefiles.
++AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++ case $enable_ltdl_convenience in
++ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
++ "") enable_ltdl_convenience=yes
++ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
++ esac
++ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++ # For backwards non-gettext consistent compatibility...
++ INCLTDL="$LTDLINCL"
++])# AC_LIBLTDL_CONVENIENCE
+
+-# _LT_AC_TAGCONFIG
+-# ----------------
+-AC_DEFUN([_LT_AC_TAGCONFIG],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_ARG_WITH([tags],
+- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+- [include additional configurations @<:@automatic@:>@])],
+- [tagnames="$withval"])
+
+-if test -f "$ltmain" && test -n "$tagnames"; then
+- if test ! -f "${ofile}"; then
+- AC_MSG_WARN([output file `$ofile' does not exist])
++# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
++# -----------------------------------
++# sets LIBLTDL to the link flags for the libltdl installable library and
++# LTDLINCL to the include flags for the libltdl header and adds
++# --enable-ltdl-install to the configure arguments. Note that
++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
++# and an installed libltdl is not found, it is assumed to be `libltdl'.
++# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
++# '${top_srcdir}/' (note the single quotes!). If your package is not
++# flat and you're not using automake, define top_builddir and top_srcdir
++# appropriately in the Makefiles.
++# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
++AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++ AC_CHECK_LIB(ltdl, lt_dlinit,
++ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
++ [if test x"$enable_ltdl_install" = xno; then
++ AC_MSG_WARN([libltdl not installed, but installation disabled])
++ else
++ enable_ltdl_install=yes
++ fi
++ ])
++ if test x"$enable_ltdl_install" = x"yes"; then
++ ac_configure_args="$ac_configure_args --enable-ltdl-install"
++ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++ else
++ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
++ LIBLTDL="-lltdl"
++ LTDLINCL=
+ fi
++ # For backwards non-gettext consistent compatibility...
++ INCLTDL="$LTDLINCL"
++])# AC_LIBLTDL_INSTALLABLE
+
+- if test -z "$LTCC"; then
+- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+- if test -z "$LTCC"; then
+- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+- else
+- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+- fi
+- fi
+- if test -z "$LTCFLAGS"; then
+- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+- fi
+
+- # Extract list of available tagged configurations in $ofile.
+- # Note that this assumes the entire list is on one line.
+- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
++# AC_LIBTOOL_CXX
++# --------------
++# enable support for C++ libraries
++AC_DEFUN([AC_LIBTOOL_CXX],
++[AC_REQUIRE([_LT_AC_LANG_CXX])
++])# AC_LIBTOOL_CXX
+
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for tagname in $tagnames; do
+- IFS="$lt_save_ifs"
+- # Check whether tagname contains only valid characters
+- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+- "") ;;
+- *) AC_MSG_ERROR([invalid tag name: $tagname])
+- ;;
+- esac
+
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+- then
+- AC_MSG_ERROR([tag name \"$tagname\" already exists])
+- fi
++# _LT_AC_LANG_CXX
++# ---------------
++AC_DEFUN([_LT_AC_LANG_CXX],
++[AC_REQUIRE([AC_PROG_CXX])
++AC_REQUIRE([_LT_AC_PROG_CXXCPP])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
++])# _LT_AC_LANG_CXX
+
+- # Update the list of available tags.
+- if test -n "$tagname"; then
+- echo appending configuration tag \"$tagname\" to $ofile
++# _LT_AC_PROG_CXXCPP
++# ------------------
++AC_DEFUN([_LT_AC_PROG_CXXCPP],
++[
++AC_REQUIRE([AC_PROG_CXX])
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++fi
++])# _LT_AC_PROG_CXXCPP
+
+- case $tagname in
+- CXX)
+- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_LIBTOOL_LANG_CXX_CONFIG
+- else
+- tagname=""
+- fi
+- ;;
++# AC_LIBTOOL_F77
++# --------------
++# enable support for Fortran 77 libraries
++AC_DEFUN([AC_LIBTOOL_F77],
++[AC_REQUIRE([_LT_AC_LANG_F77])
++])# AC_LIBTOOL_F77
+
+- F77)
+- if test -n "$F77" && test "X$F77" != "Xno"; then
+- AC_LIBTOOL_LANG_F77_CONFIG
+- else
+- tagname=""
+- fi
+- ;;
+
+- GCJ)
+- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+- AC_LIBTOOL_LANG_GCJ_CONFIG
+- else
+- tagname=""
+- fi
+- ;;
++# _LT_AC_LANG_F77
++# ---------------
++AC_DEFUN([_LT_AC_LANG_F77],
++[AC_REQUIRE([AC_PROG_F77])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
++])# _LT_AC_LANG_F77
+
+- RC)
+- AC_LIBTOOL_LANG_RC_CONFIG
+- ;;
+
+- *)
+- AC_MSG_ERROR([Unsupported tag name: $tagname])
+- ;;
+- esac
++# AC_LIBTOOL_GCJ
++# --------------
++# enable support for GCJ libraries
++AC_DEFUN([AC_LIBTOOL_GCJ],
++[AC_REQUIRE([_LT_AC_LANG_GCJ])
++])# AC_LIBTOOL_GCJ
+
+- # Append the new tag name to the list of available tags.
+- if test -n "$tagname" ; then
+- available_tags="$available_tags $tagname"
+- fi
+- fi
+- done
+- IFS="$lt_save_ifs"
+
+- # Now substitute the updated list of available tags.
+- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+- mv "${ofile}T" "$ofile"
+- chmod +x "$ofile"
+- else
+- rm -f "${ofile}T"
+- AC_MSG_ERROR([unable to update list of available tagged configurations.])
+- fi
+-fi
+-])# _LT_AC_TAGCONFIG
++# _LT_AC_LANG_GCJ
++# ---------------
++AC_DEFUN([_LT_AC_LANG_GCJ],
++[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
++ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
++ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
++ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
++])# _LT_AC_LANG_GCJ
+
+
+-# AC_LIBTOOL_DLOPEN
+-# -----------------
+-# enable checks for dlopen support
+-AC_DEFUN([AC_LIBTOOL_DLOPEN],
+- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+-])# AC_LIBTOOL_DLOPEN
++# AC_LIBTOOL_RC
++# -------------
++# enable support for Windows resource files
++AC_DEFUN([AC_LIBTOOL_RC],
++[AC_REQUIRE([LT_AC_PROG_RC])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
++])# AC_LIBTOOL_RC
+
+
+-# AC_LIBTOOL_WIN32_DLL
+-# --------------------
+-# declare package support for building win32 DLLs
+-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+-])# AC_LIBTOOL_WIN32_DLL
++# AC_LIBTOOL_LANG_C_CONFIG
++# ------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined. Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
++AC_DEFUN([_LT_AC_LANG_C_CONFIG],
++[lt_save_CC="$CC"
++AC_LANG_PUSH(C)
+
++# Source file extension for C test sources.
++ac_ext=c
+
+-# AC_ENABLE_SHARED([DEFAULT])
+-# ---------------------------
+-# implement the --enable-shared flag
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-AC_DEFUN([AC_ENABLE_SHARED],
+-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE([shared],
+- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_shared=yes ;;
+- no) enable_shared=no ;;
+- *)
+- enable_shared=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_shared=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+-])# AC_ENABLE_SHARED
++# Object file extension for compiled C test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
+
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
+
+-# AC_DISABLE_SHARED
+-# -----------------
+-# set the default shared flag to --disable-shared
+-AC_DEFUN([AC_DISABLE_SHARED],
+-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_SHARED(no)
+-])# AC_DISABLE_SHARED
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
+
++_LT_AC_SYS_COMPILER
+
+-# AC_ENABLE_STATIC([DEFAULT])
+-# ---------------------------
+-# implement the --enable-static flag
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-AC_DEFUN([AC_ENABLE_STATIC],
+-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE([static],
+- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_static=yes ;;
+- no) enable_static=no ;;
+- *)
+- enable_static=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_static=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+-])# AC_ENABLE_STATIC
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
+
++AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++AC_LIBTOOL_SYS_LIB_STRIP
++AC_LIBTOOL_DLOPEN_SELF
+
+-# AC_DISABLE_STATIC
+-# -----------------
+-# set the default static flag to --disable-static
+-AC_DEFUN([AC_DISABLE_STATIC],
+-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_STATIC(no)
+-])# AC_DISABLE_STATIC
++# Report which library types will actually be built
++AC_MSG_CHECKING([if libtool supports shared libraries])
++AC_MSG_RESULT([$can_build_shared])
+
++AC_MSG_CHECKING([whether to build shared libraries])
++test "$can_build_shared" = "no" && enable_shared=no
+
+-# AC_ENABLE_FAST_INSTALL([DEFAULT])
+-# ---------------------------------
+-# implement the --enable-fast-install flag
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE([fast-install],
+- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_fast_install=yes ;;
+- no) enable_fast_install=no ;;
+- *)
+- enable_fast_install=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_fast_install=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+-])# AC_ENABLE_FAST_INSTALL
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case $host_os in
++aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
+
++aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++esac
++AC_MSG_RESULT([$enable_shared])
+
+-# AC_DISABLE_FAST_INSTALL
+-# -----------------------
+-# set the default to --disable-fast-install
+-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_FAST_INSTALL(no)
+-])# AC_DISABLE_FAST_INSTALL
++AC_MSG_CHECKING([whether to build static libraries])
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++AC_MSG_RESULT([$enable_static])
+
++AC_LIBTOOL_CONFIG($1)
+
+-# AC_LIBTOOL_PICMODE([MODE])
+-# --------------------------
+-# implement the --with-pic flag
+-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+-AC_DEFUN([AC_LIBTOOL_PICMODE],
+-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-pic_mode=ifelse($#,1,$1,default)
+-])# AC_LIBTOOL_PICMODE
++AC_LANG_POP
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+-# AC_PROG_EGREP
+-# -------------
+-# This is predefined starting with Autoconf 2.54, so this conditional
+-# definition can be removed once we require Autoconf 2.54 or later.
+-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+- then ac_cv_prog_egrep='grep -E'
+- else ac_cv_prog_egrep='egrep'
+- fi])
+- EGREP=$ac_cv_prog_egrep
+- AC_SUBST([EGREP])
+-])])
++# AC_LIBTOOL_LANG_CXX_CONFIG
++# --------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined. Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
++AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
++[AC_LANG_PUSH(C++)
++AC_REQUIRE([AC_PROG_CXX])
++AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_AC_TAGVAR(allow_undefined_flag, $1)=
++_LT_AC_TAGVAR(always_export_symbols, $1)=no
++_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
++_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_direct, $1)=no
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++_LT_AC_TAGVAR(hardcode_automatic, $1)=no
++_LT_AC_TAGVAR(module_cmds, $1)=
++_LT_AC_TAGVAR(module_expsym_cmds, $1)=
++_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_AC_TAGVAR(no_undefined_flag, $1)=
++_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+-# AC_PATH_TOOL_PREFIX
+-# -------------------
+-# find a file program which can recognize shared library
+-AC_DEFUN([AC_PATH_TOOL_PREFIX],
+-[AC_REQUIRE([AC_PROG_EGREP])dnl
+-AC_MSG_CHECKING([for $1])
+-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+-[case $MAGIC_CMD in
+-[[\\/*] | ?:[\\/]*])
+- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+- ;;
+-*)
+- lt_save_MAGIC_CMD="$MAGIC_CMD"
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+-dnl $ac_dummy forces splitting on constant user-supplied paths.
+-dnl POSIX.2 word splitting is done only on the output of word expansions,
+-dnl not every word. This closes a longstanding sh security hole.
+- ac_dummy="ifelse([$2], , $PATH, [$2])"
+- for ac_dir in $ac_dummy; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$1; then
+- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+- if test -n "$file_magic_test_file"; then
+- case $deplibs_check_method in
+- "file_magic "*)
+- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+- $EGREP "$file_magic_regex" > /dev/null; then
+- :
+- else
+- cat <<EOF 1>&2
++# Dependencies to place before and after the object being linked:
++_LT_AC_TAGVAR(predep_objects, $1)=
++_LT_AC_TAGVAR(postdep_objects, $1)=
++_LT_AC_TAGVAR(predeps, $1)=
++_LT_AC_TAGVAR(postdeps, $1)=
++_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
++_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+
+-*** Warning: the command libtool uses to detect shared libraries,
+-*** $file_magic_cmd, produces output that libtool cannot recognize.
+-*** The result is that libtool may fail to recognize shared libraries
+-*** as such. This will affect the creation of libtool libraries that
+-*** depend on shared libraries, but programs linked with such libtool
+-*** libraries will work regardless of this problem. Nevertheless, you
+-*** may want to report the problem to your system manager and/or to
+-*** bug-libtool at gnu.org
++# Source file extension for C++ test sources.
++ac_ext=cpp
+
+-EOF
+- fi ;;
+- esac
+- fi
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+- MAGIC_CMD="$lt_save_MAGIC_CMD"
+- ;;
+-esac])
+-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+-if test -n "$MAGIC_CMD"; then
+- AC_MSG_RESULT($MAGIC_CMD)
+-else
+- AC_MSG_RESULT(no)
+-fi
+-])# AC_PATH_TOOL_PREFIX
++# Object file extension for compiled C++ test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
+
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
+
+-# AC_PATH_MAGIC
+-# -------------
+-# find a file program which can recognize a shared library
+-AC_DEFUN([AC_PATH_MAGIC],
+-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+-if test -z "$lt_cv_path_MAGIC_CMD"; then
+- if test -n "$ac_tool_prefix"; then
+- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+- else
+- MAGIC_CMD=:
+- fi
+-fi
+-])# AC_PATH_MAGIC
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
+
+-# AC_PROG_LD
+-# ----------
+-# find the pathname to the GNU or non-GNU linker
+-AC_DEFUN([AC_PROG_LD],
+-[AC_ARG_WITH([gnu-ld],
+- [AC_HELP_STRING([--with-gnu-ld],
+- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+- [test "$withval" = no || with_gnu_ld=yes],
+- [with_gnu_ld=no])
+-AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-ac_prog=ld
+-if test "$GCC" = yes; then
+- # Check if gcc -print-prog-name=ld gives a path.
+- AC_MSG_CHECKING([for ld used by $CC])
+- case $host in
+- *-*-mingw*)
+- # gcc leaves a trailing carriage return which upsets mingw
+- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+- *)
+- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+- esac
+- case $ac_prog in
+- # Accept absolute paths.
+- [[\\/]]* | ?:[[\\/]]*)
+- re_direlt='/[[^/]][[^/]]*/\.\./'
+- # Canonicalize the pathname of ld
+- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+- done
+- test -z "$LD" && LD="$ac_prog"
+- ;;
+- "")
+- # If it fails, then pretend we aren't using GCC.
+- ac_prog=ld
+- ;;
+- *)
+- # If it is relative, then search for the first ld in PATH.
+- with_gnu_ld=unknown
+- ;;
+- esac
+-elif test "$with_gnu_ld" = yes; then
+- AC_MSG_CHECKING([for GNU ld])
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_LD=$LD
++lt_save_GCC=$GCC
++GCC=$GXX
++lt_save_with_gnu_ld=$with_gnu_ld
++lt_save_path_LD=$lt_cv_path_LD
++if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+- AC_MSG_CHECKING([for non-GNU ld])
++ $as_unset lt_cv_prog_gnu_ld
+ fi
+-AC_CACHE_VAL(lt_cv_path_LD,
+-[if test -z "$LD"; then
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+- lt_cv_path_LD="$ac_dir/$ac_prog"
+- # Check to see if the program is GNU ld. I'd rather use --version,
+- # but apparently some variants of GNU ld only accept -v.
+- # Break only if it was the GNU/non-GNU ld that we prefer.
+- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+- *GNU* | *'with BFD'*)
+- test "$with_gnu_ld" != no && break
+- ;;
+- *)
+- test "$with_gnu_ld" != yes && break
+- ;;
+- esac
+- fi
+- done
+- IFS="$lt_save_ifs"
++if test -n "${lt_cv_path_LDCXX+set}"; then
++ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+-fi])
+-LD="$lt_cv_path_LD"
+-if test -n "$LD"; then
+- AC_MSG_RESULT($LD)
++ $as_unset lt_cv_path_LD
++fi
++test -z "${LDCXX+set}" || LD=$LDCXX
++CC=${CXX-"c++"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++
++# We don't want -fno-exception wen compiling C++ code, so set the
++# no_builtin_flag separately
++if test "$GXX" = yes; then
++ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+- AC_MSG_RESULT(no)
++ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+-AC_PROG_LD_GNU
+-])# AC_PROG_LD
+
++if test "$GXX" = yes; then
++ # Set up default GNU C++ configuration
+
+-# AC_PROG_LD_GNU
+-# --------------
+-AC_DEFUN([AC_PROG_LD_GNU],
+-[AC_REQUIRE([AC_PROG_EGREP])dnl
+-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+-case `$LD -v 2>&1 </dev/null` in
+-*GNU* | *'with BFD'*)
+- lt_cv_prog_gnu_ld=yes
+- ;;
+-*)
+- lt_cv_prog_gnu_ld=no
+- ;;
+-esac])
+-with_gnu_ld=$lt_cv_prog_gnu_ld
+-])# AC_PROG_LD_GNU
++ AC_PROG_LD
+
++ # Check if GNU C++ uses GNU ld as the underlying linker, since the
++ # archiving commands below assume that GNU ld is being used.
++ if test "$with_gnu_ld" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+-# AC_PROG_LD_RELOAD_FLAG
+-# ----------------------
+-# find reload flag for linker
+-# -- PORTME Some linkers may need a different reload flag.
+-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+-[AC_CACHE_CHECK([for $LD option to reload object files],
+- lt_cv_ld_reload_flag,
+- [lt_cv_ld_reload_flag='-r'])
+-reload_flag=$lt_cv_ld_reload_flag
+-case $reload_flag in
+-"" | " "*) ;;
+-*) reload_flag=" $reload_flag" ;;
+-esac
+-reload_cmds='$LD$reload_flag -o $output$reload_objs'
+-case $host_os in
+- darwin*)
+- if test "$GCC" = yes; then
+- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++ # investigate it a little bit more. (MM)
++ wlarc='${wl}'
++
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
++ grep 'no-whole-archive' > /dev/null; then
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+- reload_cmds='$LD$reload_flag -o $output$reload_objs'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+- ;;
+-esac
+-])# AC_PROG_LD_RELOAD_FLAG
+-
++ else
++ with_gnu_ld=no
++ wlarc=
+
+-# AC_DEPLIBS_CHECK_METHOD
+-# -----------------------
+-# how to check for library dependencies
+-# -- PORTME fill in with the dynamic library characteristics
+-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+-[AC_CACHE_CHECK([how to recognize dependent libraries],
+-lt_cv_deplibs_check_method,
+-[lt_cv_file_magic_cmd='$MAGIC_CMD'
+-lt_cv_file_magic_test_file=
+-lt_cv_deplibs_check_method='unknown'
+-# Need to set the preceding variable on all platforms that support
+-# interlibrary dependencies.
+-# 'none' -- dependencies not supported.
+-# `unknown' -- same as none, but documents that we really don't know.
+-# 'pass_all' -- all dependencies passed with no checks.
+-# 'test_compile' -- check by making test program.
+-# 'file_magic [[regex]]' -- check by looking for files in library path
+-# which responds to the $file_magic_cmd with a given extended regex.
+-# If you have `file' or equivalent on your system and you're not sure
+-# whether `pass_all' will *always* work, you probably want this one.
++ # A generic and very simple default shared library creation
++ # command for GNU C++ for the case where it uses the native
++ # linker, instead of GNU ld. If possible, this setting should
++ # overridden to take advantage of the native linker features on
++ # the platform it is being used on.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ fi
+
+-case $host_os in
+-aix[[4-9]]*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+-beos*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
++else
++ GXX=no
++ with_gnu_ld=no
++ wlarc=
++fi
+
+-bsdi[[45]]*)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+- lt_cv_file_magic_cmd='/usr/bin/file -L'
+- lt_cv_file_magic_test_file=/shlib/libc.so
+- ;;
++# PORTME: fill in a description of your system's C++ link characteristics
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++_LT_AC_TAGVAR(ld_shlibs, $1)=yes
++case $host_os in
++ aix3*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ aix_use_runtimelinking=no
+
+-cygwin*)
+- # func_win32_libid is a shell function defined in ltmain.sh
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='func_win32_libid'
+- ;;
+-
+-mingw* | pw32*)
+- # Base MSYS/MinGW do not provide the 'file' command needed by
+- # func_win32_libid shell function, so use a weaker test based on 'objdump',
+- # unless we find 'file', for example because we are cross-compiling.
+- if ( file / ) >/dev/null 2>&1; then
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='func_win32_libid'
+- else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+- lt_cv_file_magic_cmd='$OBJDUMP -f'
+- fi
+- ;;
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ ;;
++ esac
+
+-darwin* | rhapsody*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
+
+-freebsd* | dragonfly*)
+- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+- case $host_cpu in
+- i*86 )
+- # Not sure whether the presence of OpenBSD here was a mistake.
+- # Let's accept both of them until this is cleared up.
+- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+- ;;
+- esac
+- else
+- lt_cv_deplibs_check_method=pass_all
+- fi
+- ;;
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+-gnu*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
++ _LT_AC_TAGVAR(archive_cmds, $1)=''
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+-hpux10.20* | hpux11*)
+- lt_cv_file_magic_cmd=/usr/bin/file
+- case $host_cpu in
+- ia64*)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+- ;;
+- hppa*64*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+- ;;
+- *)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+- ;;
+- esac
+- ;;
++ if test "$GXX" = yes; then
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" && \
++ strings "$collect2name" | grep resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++ fi
++ ;;
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
+
+-interix[[3-9]]*)
+- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+- ;;
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
++ # Determine the default libpath from the value encoded in an empty executable.
++ _LT_AC_SYS_LIBPATH_AIX
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+-irix5* | irix6* | nonstopux*)
+- case $LD in
+- *-32|*"-32 ") libmagic=32-bit;;
+- *-n32|*"-n32 ") libmagic=N32;;
+- *-64|*"-64 ") libmagic=64-bit;;
+- *) libmagic=never-match;;
+- esac
+- lt_cv_deplibs_check_method=pass_all
+- ;;
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ else
++ if test "$host_cpu" = ia64; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an empty executable.
++ _LT_AC_SYS_LIBPATH_AIX
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++ # This is similar to how AIX traditionally builds its shared libraries.
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
++ fi
++ ;;
+
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
++ beos*)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
+
+-netbsd*)
+- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+- else
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+- fi
+- ;;
++ chorus*)
++ case $cc_basename in
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
+
+-newos6*)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=/usr/lib/libnls.so
+- ;;
++ cygwin* | mingw* | pw32*)
++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+-nto-qnx*)
+- lt_cv_deplibs_check_method=unknown
++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
+ ;;
++ darwin* | rhapsody*)
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
++ if test "$GXX" = yes ; then
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
++ fi
++ else
++ case $cc_basename in
++ xlc*)
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ ;;
++ *)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ fi
++ ;;
+
+-openbsd*)
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+- else
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+- fi
+- ;;
+-
+-osf3* | osf4* | osf5*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-rdos*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-solaris*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-sysv4 | sysv4.3*)
+- case $host_vendor in
+- motorola)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+- ;;
+- ncr)
+- lt_cv_deplibs_check_method=pass_all
++ dgux*)
++ case $cc_basename in
++ ec++*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ ghcx*)
++ # Green Hills C++ Compiler
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
+ ;;
+- sequent)
+- lt_cv_file_magic_cmd='/bin/file'
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
++ freebsd[[12]]*)
++ # C++ shared libraries reported to be fairly broken before switch to ELF
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- sni)
+- lt_cv_file_magic_cmd='/bin/file'
+- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+- lt_cv_file_magic_test_file=/lib/libc.so
++ freebsd-elf*)
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+- siemens)
+- lt_cv_deplibs_check_method=pass_all
++ freebsd* | dragonfly*)
++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++ # conventions
++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+- pc)
+- lt_cv_deplibs_check_method=pass_all
++ gnu*)
+ ;;
+- esac
+- ;;
++ hpux9*)
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++ # but as the default
++ # location of the library.
+
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-esac
+-])
+-file_magic_cmd=$lt_cv_file_magic_cmd
+-deplibs_check_method=$lt_cv_deplibs_check_method
+-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+-])# AC_DEPLIBS_CHECK_METHOD
++ case $cc_basename in
++ CC*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aCC*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++ hpux10*|hpux11*)
++ if test $with_gnu_ld = no; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
++ case $host_cpu in
++ hppa*64*|ia64*) ;;
++ *)
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ ;;
++ esac
++ fi
++ case $host_cpu in
++ hppa*64*|ia64*)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++ *)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++ # but as the default
++ # location of the library.
++ ;;
++ esac
+
+-# AC_PROG_NM
+-# ----------
+-# find the pathname to a BSD-compatible name lister
+-AC_DEFUN([AC_PROG_NM],
+-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+-[if test -n "$NM"; then
+- # Let the user override the test.
+- lt_cv_path_NM="$NM"
+-else
+- lt_nm_to_check="${ac_tool_prefix}nm"
+- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+- lt_nm_to_check="$lt_nm_to_check nm"
+- fi
+- for lt_tmp_nm in $lt_nm_to_check; do
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- tmp_nm="$ac_dir/$lt_tmp_nm"
+- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+- # Check to see if the nm accepts a BSD-compat flag.
+- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+- # nm: unknown option "B" ignored
+- # Tru64's nm complains that /dev/null is an invalid object file
+- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+- */dev/null* | *'Invalid file or object type'*)
+- lt_cv_path_NM="$tmp_nm -B"
+- break
++ case $cc_basename in
++ CC*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aCC*)
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+- */dev/null*)
+- lt_cv_path_NM="$tmp_nm -p"
+- break
+- ;;
+- *)
+- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+- continue # so that we can try to find one that supports BSD flags
+- ;;
+- esac
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+- fi
+- done
+- IFS="$lt_save_ifs"
+- done
+- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+-fi])
+-NM="$lt_cv_path_NM"
+-])# AC_PROG_NM
+-
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ if test $with_gnu_ld = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ esac
++ fi
++ else
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++ interix[[3-9]]*)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++ irix5* | irix6*)
++ case $cc_basename in
++ CC*)
++ # SGI C++
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+-# AC_CHECK_LIBM
+-# -------------
+-# check for math library
+-AC_DEFUN([AC_CHECK_LIBM],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+- # These system don't have libm, or don't need it
+- ;;
+-*-ncr-sysv4.3*)
+- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+- ;;
+-*)
+- AC_CHECK_LIB(m, cos, LIBM="-lm")
+- ;;
+-esac
+-])# AC_CHECK_LIBM
++ # Archives containing C++ object files must be created using
++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ if test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
++ fi
++ fi
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++ esac
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ ;;
++ linux* | k*bsd*-gnu)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+-# -----------------------------------
+-# sets LIBLTDL to the link flags for the libltdl convenience library and
+-# LTDLINCL to the include flags for the libltdl header and adds
+-# --enable-ltdl-convenience to the configure arguments. Note that
+-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
+-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
+-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+-# (note the single quotes!). If your package is not flat and you're not
+-# using automake, define top_builddir and top_srcdir appropriately in
+-# the Makefiles.
+-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+- case $enable_ltdl_convenience in
+- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+- "") enable_ltdl_convenience=yes
+- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+- esac
+- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+- # For backwards non-gettext consistent compatibility...
+- INCLTDL="$LTDLINCL"
+-])# AC_LIBLTDL_CONVENIENCE
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
++ # Archives containing C++ object files must be created using
++ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++ ;;
++ icpc*)
++ # Intel C++
++ with_gnu_ld=yes
++ # version 8.0 and above of icpc choke on multiply defined symbols
++ # if we add $predep_objects and $postdep_objects, however 7.1 and
++ # earlier do not add the objects themselves.
++ case `$CC -V 2>&1` in
++ *"Version 7."*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ *) # Version 8.0 or newer
++ tmp_idyn=
++ case $host_cpu in
++ ia64*) tmp_idyn=' -i_dynamic';;
++ esac
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ esac
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ ;;
++ pgCC* | pgcpp*)
++ # Portland Group C++ compiler
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+-# -----------------------------------
+-# sets LIBLTDL to the link flags for the libltdl installable library and
+-# LTDLINCL to the include flags for the libltdl header and adds
+-# --enable-ltdl-install to the configure arguments. Note that
+-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
+-# and an installed libltdl is not found, it is assumed to be `libltdl'.
+-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+-# '${top_srcdir}/' (note the single quotes!). If your package is not
+-# flat and you're not using automake, define top_builddir and top_srcdir
+-# appropriately in the Makefiles.
+-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+- AC_CHECK_LIB(ltdl, lt_dlinit,
+- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+- [if test x"$enable_ltdl_install" = xno; then
+- AC_MSG_WARN([libltdl not installed, but installation disabled])
+- else
+- enable_ltdl_install=yes
+- fi
+- ])
+- if test x"$enable_ltdl_install" = x"yes"; then
+- ac_configure_args="$ac_configure_args --enable-ltdl-install"
+- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+- else
+- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+- LIBLTDL="-lltdl"
+- LTDLINCL=
+- fi
+- # For backwards non-gettext consistent compatibility...
+- INCLTDL="$LTDLINCL"
+-])# AC_LIBLTDL_INSTALLABLE
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ ;;
++ cxx*)
++ # Compaq C++
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
++ runpath_var=LD_RUN_PATH
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+-# AC_LIBTOOL_CXX
+-# --------------
+-# enable support for C++ libraries
+-AC_DEFUN([AC_LIBTOOL_CXX],
+-[AC_REQUIRE([_LT_AC_LANG_CXX])
+-])# AC_LIBTOOL_CXX
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+
++ # Not sure whether something based on
++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
++ # would be better.
++ output_verbose_link_cmd='echo'
+
+-# _LT_AC_LANG_CXX
+-# ---------------
+-AC_DEFUN([_LT_AC_LANG_CXX],
+-[AC_REQUIRE([AC_PROG_CXX])
+-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+-])# _LT_AC_LANG_CXX
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++ lynxos*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ m88k*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ mvs*)
++ case $cc_basename in
++ cxx*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++ wlarc=
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ fi
++ # Workaround some broken pre-1.5 toolchains
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++ ;;
++ openbsd2*)
++ # C++ shared libraries are fairly broken
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ fi
++ output_verbose_link_cmd='echo'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ osf3*)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+-# _LT_AC_PROG_CXXCPP
+-# ------------------
+-AC_DEFUN([_LT_AC_PROG_CXXCPP],
+-[
+-AC_REQUIRE([AC_PROG_CXX])
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-fi
+-])# _LT_AC_PROG_CXXCPP
+-
+-# AC_LIBTOOL_F77
+-# --------------
+-# enable support for Fortran 77 libraries
+-AC_DEFUN([AC_LIBTOOL_F77],
+-[AC_REQUIRE([_LT_AC_LANG_F77])
+-])# AC_LIBTOOL_F77
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+-# _LT_AC_LANG_F77
+-# ---------------
+-AC_DEFUN([_LT_AC_LANG_F77],
+-[AC_REQUIRE([AC_PROG_F77])
+-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+-])# _LT_AC_LANG_F77
++ # Archives containing C++ object files must be created using
++ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
++ ;;
++ RCC*)
++ # Rational C++ 2.4.1
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ cxx*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+-# AC_LIBTOOL_GCJ
+-# --------------
+-# enable support for GCJ libraries
+-AC_DEFUN([AC_LIBTOOL_GCJ],
+-[AC_REQUIRE([_LT_AC_LANG_GCJ])
+-])# AC_LIBTOOL_GCJ
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ ;;
++ *)
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+-# _LT_AC_LANG_GCJ
+-# ---------------
+-AC_DEFUN([_LT_AC_LANG_GCJ],
+-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+-])# _LT_AC_LANG_GCJ
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+-# AC_LIBTOOL_RC
+-# -------------
+-# enable support for Windows resource files
+-AC_DEFUN([AC_LIBTOOL_RC],
+-[AC_REQUIRE([LT_AC_PROG_RC])
+-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+-])# AC_LIBTOOL_RC
++ else
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++ osf4* | osf5*)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+-# AC_LIBTOOL_LANG_C_CONFIG
+-# ------------------------
+-# Ensure that the configuration vars for the C compiler are
+-# suitably defined. Those variables are subsequently used by
+-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+-[lt_save_CC="$CC"
+-AC_LANG_PUSH(C)
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+-# Source file extension for C test sources.
+-ac_ext=c
++ # Archives containing C++ object files must be created using
++ # the KAI C++ compiler.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
++ ;;
++ RCC*)
++ # Rational C++ 2.4.1
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ cxx*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++ echo "-hidden">> $lib.exp~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
++ $rm $lib.exp'
+
+-# Object file extension for compiled C test sources.
+-objext=o
+-_LT_AC_TAGVAR(objext, $1)=$objext
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;"
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ ;;
++ *)
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='int main(){return(0);}'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+-_LT_AC_SYS_COMPILER
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++ else
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++ psos*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ sunos4*)
++ case $cc_basename in
++ CC*)
++ # Sun C++ 4.x
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ lcc*)
++ # Lucid
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++ solaris*)
++ case $cc_basename in
++ CC*)
++ # Sun C++ 4.2, 5.x and Centerline C++
++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+-AC_LIBTOOL_PROG_COMPILER_PIC($1)
+-AC_LIBTOOL_PROG_CC_C_O($1)
+-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+-AC_LIBTOOL_PROG_LD_SHLIBS($1)
+-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+-AC_LIBTOOL_SYS_LIB_STRIP
+-AC_LIBTOOL_DLOPEN_SELF
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ ;;
++ esac
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+-# Report which library types will actually be built
+-AC_MSG_CHECKING([if libtool supports shared libraries])
+-AC_MSG_RESULT([$can_build_shared])
++ output_verbose_link_cmd='echo'
+
+-AC_MSG_CHECKING([whether to build shared libraries])
+-test "$can_build_shared" = "no" && enable_shared=no
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ gcx*)
++ # Green Hills C++ Compiler
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+-# On AIX, shared libraries and static libraries use the same namespace, and
+-# are all built from PIC.
+-case $host_os in
+-aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
++ # The C++ compiler must be used to create the archive.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++ ;;
++ *)
++ # GNU C++ compiler with Solaris linker
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
++ if $CC --version | grep -v '^2\.7' > /dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+-aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+-esac
+-AC_MSG_RESULT([$enable_shared])
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
++ else
++ # g++ 2.7 appears to require `-G' NOT `-shared' on this
++ # platform.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+-AC_MSG_CHECKING([whether to build static libraries])
+-# Make sure either enable_shared or enable_static is yes.
+-test "$enable_shared" = yes || enable_static=yes
+-AC_MSG_RESULT([$enable_static])
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
++ fi
+
+-AC_LIBTOOL_CONFIG($1)
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ ;;
++ esac
++ fi
++ ;;
++ esac
++ ;;
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
+
+-AC_LANG_POP
+-CC="$lt_save_CC"
+-])# AC_LIBTOOL_LANG_C_CONFIG
++ case $cc_basename in
++ CC*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ # For security reasons, it is highly recommended that you always
++ # use absolute paths for naming shared libraries, and exclude the
++ # DT_RUNPATH tag from executables and libraries. But doing so
++ # requires that you compile everything twice, which is a pain.
++ # So that behaviour is only enabled if SCOABSPATH is set to a
++ # non-empty value in the environment. Most likely only useful for
++ # creating official distributions of packages.
++ # This is a hack until libtool officially supports absolute path
++ # names for shared libraries.
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
+
++ case $cc_basename in
++ CC*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
++ tandem*)
++ case $cc_basename in
++ NCC*)
++ # NonStop-UX NCC 3.20
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++ vxworks*)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++esac
++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+-# AC_LIBTOOL_LANG_CXX_CONFIG
+-# --------------------------
+-# Ensure that the configuration vars for the C compiler are
+-# suitably defined. Those variables are subsequently used by
+-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+-[AC_LANG_PUSH(C++)
+-AC_REQUIRE([AC_PROG_CXX])
+-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
++_LT_AC_TAGVAR(GCC, $1)="$GXX"
++_LT_AC_TAGVAR(LD, $1)="$LD"
+
+-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+-_LT_AC_TAGVAR(always_export_symbols, $1)=no
+-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_AC_TAGVAR(hardcode_direct, $1)=no
+-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+-_LT_AC_TAGVAR(module_cmds, $1)=
+-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_AC_TAGVAR(no_undefined_flag, $1)=
+-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++AC_LIBTOOL_POSTDEP_PREDEP($1)
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+-# Dependencies to place before and after the object being linked:
+-_LT_AC_TAGVAR(predep_objects, $1)=
+-_LT_AC_TAGVAR(postdep_objects, $1)=
+-_LT_AC_TAGVAR(predeps, $1)=
+-_LT_AC_TAGVAR(postdeps, $1)=
+-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
++AC_LIBTOOL_CONFIG($1)
+
+-# Source file extension for C++ test sources.
+-ac_ext=cpp
++AC_LANG_POP
++CC=$lt_save_CC
++LDCXX=$LD
++LD=$lt_save_LD
++GCC=$lt_save_GCC
++with_gnu_ldcxx=$with_gnu_ld
++with_gnu_ld=$lt_save_with_gnu_ld
++lt_cv_path_LDCXX=$lt_cv_path_LD
++lt_cv_path_LD=$lt_save_path_LD
++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+-# Object file extension for compiled C++ test sources.
+-objext=o
+-_LT_AC_TAGVAR(objext, $1)=$objext
++# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
++# ------------------------------------
++# Figure out "hidden" library dependencies from verbose
++# compiler output when linking a shared library.
++# Parse the compiler output and extract the necessary
++# objects, libraries and library flags.
++AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++dnl we can't use the lt_simple_compile_test_code here,
++dnl because it contains code intended for an executable,
++dnl not a library. It's possible we should let each
++dnl tag define a new lt_????_link_test_code variable,
++dnl but it's only used here...
++ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
++int a;
++void foo (void) { a = 0; }
++EOF
++],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
++class Foo
++{
++public:
++ Foo (void) { a = 0; }
++private:
++ int a;
++};
++EOF
++],[$1],[F77],[cat > conftest.$ac_ext <<EOF
++ subroutine foo
++ implicit none
++ integer*4 a
++ a=0
++ return
++ end
++EOF
++],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
++public class foo {
++ private int a;
++ public void bar (void) {
++ a = 0;
++ }
++};
++EOF
++])
++dnl Parse the compiler output and extract the necessary
++dnl objects, libraries and library flags.
++if AC_TRY_EVAL(ac_compile); then
++ # Parse the compiler output and extract the necessary
++ # objects, libraries and library flags.
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;"
++ # Sentinel used to keep track of whether or not we are before
++ # the conftest object file.
++ pre_test_object_deps_done=no
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
++ # The `*' in the case matches for architectures that use `case' in
++ # $output_verbose_cmd can trigger glob expansion during the loop
++ # eval without this substitution.
++ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_AC_SYS_COMPILER
++ for p in `eval $output_verbose_link_cmd`; do
++ case $p in
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++ -L* | -R* | -l*)
++ # Some compilers place space between "-{L,R}" and the path.
++ # Remove the space.
++ if test $p = "-L" \
++ || test $p = "-R"; then
++ prev=$p
++ continue
++ else
++ prev=
++ fi
+
+-# Allow CC to be a program name with arguments.
+-lt_save_CC=$CC
+-lt_save_LD=$LD
+-lt_save_GCC=$GCC
+-GCC=$GXX
+-lt_save_with_gnu_ld=$with_gnu_ld
+-lt_save_path_LD=$lt_cv_path_LD
+-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+-else
+- $as_unset lt_cv_prog_gnu_ld
+-fi
+-if test -n "${lt_cv_path_LDCXX+set}"; then
+- lt_cv_path_LD=$lt_cv_path_LDCXX
+-else
+- $as_unset lt_cv_path_LD
+-fi
+-test -z "${LDCXX+set}" || LD=$LDCXX
+-CC=${CXX-"c++"}
+-compiler=$CC
+-_LT_AC_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
++ if test "$pre_test_object_deps_done" = no; then
++ case $p in
++ -L* | -R*)
++ # Internal compiler library paths should come after those
++ # provided the user. The postdeps already come after the
++ # user supplied libs so there is no need to process them.
++ if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
++ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
++ else
++ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
++ fi
++ ;;
++ # The "-l" case would never come before the object being
++ # linked, so don't bother handling this case.
++ esac
++ else
++ if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
++ _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
++ else
++ _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
++ fi
++ fi
++ ;;
+
+-# We don't want -fno-exception wen compiling C++ code, so set the
+-# no_builtin_flag separately
+-if test "$GXX" = yes; then
+- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+-else
+- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+-fi
++ *.$objext)
++ # This assumes that the test object file only shows up
++ # once in the compiler output.
++ if test "$p" = "conftest.$objext"; then
++ pre_test_object_deps_done=yes
++ continue
++ fi
+
+-if test "$GXX" = yes; then
+- # Set up default GNU C++ configuration
++ if test "$pre_test_object_deps_done" = no; then
++ if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
++ _LT_AC_TAGVAR(predep_objects, $1)="$p"
++ else
++ _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
++ fi
++ else
++ if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
++ _LT_AC_TAGVAR(postdep_objects, $1)="$p"
++ else
++ _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
++ fi
++ fi
++ ;;
+
+- AC_PROG_LD
++ *) ;; # Ignore the rest.
+
+- # Check if GNU C++ uses GNU ld as the underlying linker, since the
+- # archiving commands below assume that GNU ld is being used.
+- if test "$with_gnu_ld" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ esac
++ done
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ # Clean up.
++ rm -f a.out a.exe
++else
++ echo "libtool.m4: error: problem compiling $1 test program"
++fi
+
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+- # investigate it a little bit more. (MM)
+- wlarc='${wl}'
++$rm -f confest.$objext
+
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+- grep 'no-whole-archive' > /dev/null; then
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- with_gnu_ld=no
+- wlarc=
++_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
++if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
++ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
++fi
+
+- # A generic and very simple default shared library creation
+- # command for GNU C++ for the case where it uses the native
+- # linker, instead of GNU ld. If possible, this setting should
+- # overridden to take advantage of the native linker features on
+- # the platform it is being used on.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- fi
++# PORTME: override above test on systems where it is broken
++ifelse([$1],[CXX],
++[case $host_os in
++interix[[3-9]]*)
++ # Interix 3.5 installs completely hosed .la files for C++, so rather than
++ # hack all around it, let's just trust "g++" to DTRT.
++ _LT_AC_TAGVAR(predep_objects,$1)=
++ _LT_AC_TAGVAR(postdep_objects,$1)=
++ _LT_AC_TAGVAR(postdeps,$1)=
++ ;;
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++linux*)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ #
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
+
+-else
+- GXX=no
+- with_gnu_ld=no
+- wlarc=
+-fi
++solaris*)
++ case $cc_basename in
++ CC*)
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
+
+-# PORTME: fill in a description of your system's C++ link characteristics
+-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+-case $host_os in
+- aix3*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ # Adding this requires a known-good setup of shared libraries for
++ # Sun compiler versions before 5.6, else PIC objects from an old
++ # archive will be linked into the output, leading to subtle bugs.
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
+ ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- aix_use_runtimelinking=no
++ esac
++ ;;
++esac
++])
++case " $_LT_AC_TAGVAR(postdeps, $1) " in
++*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
++esac
++])# AC_LIBTOOL_POSTDEP_PREDEP
+
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- case $ld_flag in
+- *-brtl*)
+- aix_use_runtimelinking=yes
+- break
+- ;;
+- esac
+- done
+- ;;
+- esac
++# AC_LIBTOOL_LANG_F77_CONFIG
++# --------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined. Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
++AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
++[AC_REQUIRE([AC_PROG_F77])
++AC_LANG_PUSH(Fortran 77)
+
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_AC_TAGVAR(allow_undefined_flag, $1)=
++_LT_AC_TAGVAR(always_export_symbols, $1)=no
++_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
++_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_direct, $1)=no
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++_LT_AC_TAGVAR(hardcode_automatic, $1)=no
++_LT_AC_TAGVAR(module_cmds, $1)=
++_LT_AC_TAGVAR(module_expsym_cmds, $1)=
++_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_AC_TAGVAR(no_undefined_flag, $1)=
++_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++# Source file extension for f77 test sources.
++ac_ext=f
+
+- _LT_AC_TAGVAR(archive_cmds, $1)=''
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++# Object file extension for compiled f77 test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
+
+- if test "$GXX" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" && \
+- strings "$collect2name" | grep resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- ;;
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="\
++ subroutine t
++ return
++ end
++"
+
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to export.
+- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an empty executable.
+- _LT_AC_SYS_LIBPATH_AIX
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++# Code to be used in simple link tests
++lt_simple_link_test_code="\
++ program t
++ end
++"
+
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an empty executable.
+- _LT_AC_SYS_LIBPATH_AIX
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared libraries.
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
+
+- beos*)
+- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
+
+- chorus*)
+- case $cc_basename in
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${F77-"f77"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
+
+- cygwin* | mingw* | pw32*)
+- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
+- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++AC_MSG_CHECKING([if libtool supports shared libraries])
++AC_MSG_RESULT([$can_build_shared])
+
+- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
++AC_MSG_CHECKING([whether to build shared libraries])
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case $host_os in
++aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
+ ;;
+- darwin* | rhapsody*)
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+- if test "$GXX" = yes ; then
+- output_verbose_link_cmd='echo'
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+- if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+- fi
+- else
+- case $cc_basename in
+- xlc*)
+- output_verbose_link_cmd='echo'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- ;;
+- *)
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- fi
+- ;;
++aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++esac
++AC_MSG_RESULT([$enable_shared])
+
+- dgux*)
+- case $cc_basename in
+- ec++*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- ghcx*)
+- # Green Hills C++ Compiler
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+- freebsd[[12]]*)
+- # C++ shared libraries reported to be fairly broken before switch to ELF
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- freebsd-elf*)
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- ;;
+- freebsd* | dragonfly*)
+- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+- # conventions
+- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+- ;;
+- gnu*)
+- ;;
+- hpux9*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
++AC_MSG_CHECKING([whether to build static libraries])
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++AC_MSG_RESULT([$enable_static])
+
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+- hpux10*|hpux11*)
+- if test $with_gnu_ld = no; then
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++_LT_AC_TAGVAR(GCC, $1)="$G77"
++_LT_AC_TAGVAR(LD, $1)="$LD"
+
+- case $host_cpu in
+- hppa*64*|ia64*) ;;
+- *)
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
+- esac
+- fi
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+- ;;
+- esac
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- case $host_cpu in
+- hppa*64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test $with_gnu_ld = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- fi
+- else
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+- interix[[3-9]]*)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
+- irix5* | irix6*)
+- case $cc_basename in
+- CC*)
+- # SGI C++
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++AC_LIBTOOL_CONFIG($1)
+
+- # Archives containing C++ object files must be created using
+- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+- fi
+- fi
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+- esac
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
++AC_LANG_POP
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_F77_CONFIG
+
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++# AC_LIBTOOL_LANG_GCJ_CONFIG
++# --------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined. Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
++AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
++[AC_LANG_SAVE
+
+- # Archives containing C++ object files must be created using
+- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+- ;;
+- icpc*)
+- # Intel C++
+- with_gnu_ld=yes
+- # version 8.0 and above of icpc choke on multiply defined symbols
+- # if we add $predep_objects and $postdep_objects, however 7.1 and
+- # earlier do not add the objects themselves.
+- case `$CC -V 2>&1` in
+- *"Version 7."*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- *) # Version 8.0 or newer
+- tmp_idyn=
+- case $host_cpu in
+- ia64*) tmp_idyn=' -i_dynamic';;
+- esac
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- esac
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+- ;;
+- pgCC* | pgcpp*)
+- # Portland Group C++ compiler
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++# Source file extension for Java test sources.
++ac_ext=java
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+- ;;
+- cxx*)
+- # Compaq C++
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++# Object file extension for compiled Java test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
+
+- runpath_var=LD_RUN_PATH
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}"
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+- # Not sure whether something based on
+- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+- # would be better.
+- output_verbose_link_cmd='echo'
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
+
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+- lynxos*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- m88k*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- mvs*)
+- case $cc_basename in
+- cxx*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+- netbsd*)
+- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+- wlarc=
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- fi
+- # Workaround some broken pre-1.5 toolchains
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+- ;;
+- openbsd2*)
+- # C++ shared libraries are fairly broken
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- fi
+- output_verbose_link_cmd='echo'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- osf3*)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
+-
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+-
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
+
+- # Archives containing C++ object files must be created using
+- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${GCJ-"gcj"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
+
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- cxx*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+- ;;
+- *)
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++AC_LIBTOOL_CONFIG($1)
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++AC_LANG_RESTORE
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+- else
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+- osf4* | osf5*)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++# AC_LIBTOOL_LANG_RC_CONFIG
++# -------------------------
++# Ensure that the configuration vars for the Windows resource compiler are
++# suitably defined. Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
++AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
++[AC_LANG_SAVE
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++# Source file extension for RC test sources.
++ac_ext=rc
+
+- # Archives containing C++ object files must be created using
+- # the KAI C++ compiler.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- cxx*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+- echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+- $rm $lib.exp'
++# Object file extension for compiled RC test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+- ;;
+- *)
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
+
+- else
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+- psos*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- sunos4*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.x
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- lcc*)
+- # Lucid
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+- solaris*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.2, 5.x and Centerline C++
+- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${RC-"windres"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- ;;
+- esac
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++AC_LIBTOOL_CONFIG($1)
+
+- output_verbose_link_cmd='echo'
++AC_LANG_RESTORE
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_RC_CONFIG
+
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- gcx*)
+- # Green Hills C++ Compiler
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+- # The C++ compiler must be used to create the archive.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+- ;;
+- *)
+- # GNU C++ compiler with Solaris linker
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+- if $CC --version | grep -v '^2\.7' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+- else
+- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+- # platform.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+- fi
+-
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- ;;
+- esac
+- fi
+- ;;
+- esac
+- ;;
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
++# AC_LIBTOOL_CONFIG([TAGNAME])
++# ----------------------------
++# If TAGNAME is not passed, then create an initial libtool script
++# with a default configuration from the untagged config vars. Otherwise
++# add code to config.status for appending the configuration named by
++# TAGNAME from the matching tagged config vars.
++AC_DEFUN([AC_LIBTOOL_CONFIG],
++[# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++ # See if we are running on zsh, and set the options which allow our commands through
++ # without removal of \ escapes.
++ if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++ fi
++ # Now quote all the things that may contain metacharacters while being
++ # careful not to overquote the AC_SUBSTed values. We take copies of the
++ # variables and quote the copies for generation of the libtool script.
++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++ SED SHELL STRIP \
++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++ deplibs_check_method reload_flag reload_cmds need_locks \
++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++ lt_cv_sys_global_symbol_to_c_name_address \
++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++ old_postinstall_cmds old_postuninstall_cmds \
++ _LT_AC_TAGVAR(compiler, $1) \
++ _LT_AC_TAGVAR(CC, $1) \
++ _LT_AC_TAGVAR(LD, $1) \
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
++ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
++ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
++ _LT_AC_TAGVAR(old_archive_cmds, $1) \
++ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
++ _LT_AC_TAGVAR(predep_objects, $1) \
++ _LT_AC_TAGVAR(postdep_objects, $1) \
++ _LT_AC_TAGVAR(predeps, $1) \
++ _LT_AC_TAGVAR(postdeps, $1) \
++ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
++ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
++ _LT_AC_TAGVAR(archive_cmds, $1) \
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
++ _LT_AC_TAGVAR(postinstall_cmds, $1) \
++ _LT_AC_TAGVAR(postuninstall_cmds, $1) \
++ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
++ _LT_AC_TAGVAR(allow_undefined_flag, $1) \
++ _LT_AC_TAGVAR(no_undefined_flag, $1) \
++ _LT_AC_TAGVAR(export_symbols_cmds, $1) \
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
++ _LT_AC_TAGVAR(hardcode_automatic, $1) \
++ _LT_AC_TAGVAR(module_cmds, $1) \
++ _LT_AC_TAGVAR(module_expsym_cmds, $1) \
++ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
++ _LT_AC_TAGVAR(fix_srcfile_path, $1) \
++ _LT_AC_TAGVAR(exclude_expsyms, $1) \
++ _LT_AC_TAGVAR(include_expsyms, $1); do
+
+- case $cc_basename in
+- CC*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
++ case $var in
++ _LT_AC_TAGVAR(old_archive_cmds, $1) | \
++ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
++ _LT_AC_TAGVAR(archive_cmds, $1) | \
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
++ _LT_AC_TAGVAR(module_cmds, $1) | \
++ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
++ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
++ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
++ extract_expsyms_cmds | reload_cmds | finish_cmds | \
++ postinstall_cmds | postuninstall_cmds | \
++ old_postinstall_cmds | old_postuninstall_cmds | \
++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++ # Double-quote double-evaled strings.
++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++ ;;
++ *)
++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++ ;;
+ esac
+- ;;
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- # For security reasons, it is highly recommended that you always
+- # use absolute paths for naming shared libraries, and exclude the
+- # DT_RUNPATH tag from executables and libraries. But doing so
+- # requires that you compile everything twice, which is a pain.
+- # So that behaviour is only enabled if SCOABSPATH is set to a
+- # non-empty value in the environment. Most likely only useful for
+- # creating official distributions of packages.
+- # This is a hack until libtool officially supports absolute path
+- # names for shared libraries.
+- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
++ done
+
+- case $cc_basename in
+- CC*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+- vxworks*)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ case $lt_echo in
++ *'\[$]0 --fallback-echo"')
++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+ ;;
+-esac
+-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++ esac
+
+-_LT_AC_TAGVAR(GCC, $1)="$GXX"
+-_LT_AC_TAGVAR(LD, $1)="$LD"
++ifelse([$1], [],
++ [cfgfile="${ofile}T"
++ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
++ $rm -f "$cfgfile"
++ AC_MSG_NOTICE([creating $ofile])],
++ [cfgfile="$ofile"])
+
+-AC_LIBTOOL_POSTDEP_PREDEP($1)
+-AC_LIBTOOL_PROG_COMPILER_PIC($1)
+-AC_LIBTOOL_PROG_CC_C_O($1)
+-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+-AC_LIBTOOL_PROG_LD_SHLIBS($1)
+-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++ cat <<__EOF__ >> "$cfgfile"
++ifelse([$1], [],
++[#! $SHELL
+
+-AC_LIBTOOL_CONFIG($1)
++# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
++# Free Software Foundation, Inc.
++#
++# This file is part of GNU Libtool:
++# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
+
+-AC_LANG_POP
+-CC=$lt_save_CC
+-LDCXX=$LD
+-LD=$lt_save_LD
+-GCC=$lt_save_GCC
+-with_gnu_ldcxx=$with_gnu_ld
+-with_gnu_ld=$lt_save_with_gnu_ld
+-lt_cv_path_LDCXX=$lt_cv_path_LD
+-lt_cv_path_LD=$lt_save_path_LD
+-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+-])# AC_LIBTOOL_LANG_CXX_CONFIG
++# A sed program that does not truncate output.
++SED=$lt_SED
+
+-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+-# ------------------------------------
+-# Figure out "hidden" library dependencies from verbose
+-# compiler output when linking a shared library.
+-# Parse the compiler output and extract the necessary
+-# objects, libraries and library flags.
+-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-dnl we can't use the lt_simple_compile_test_code here,
+-dnl because it contains code intended for an executable,
+-dnl not a library. It's possible we should let each
+-dnl tag define a new lt_????_link_test_code variable,
+-dnl but it's only used here...
+-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+-int a;
+-void foo (void) { a = 0; }
+-EOF
+-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+-class Foo
+-{
+-public:
+- Foo (void) { a = 0; }
+-private:
+- int a;
+-};
+-EOF
+-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+- subroutine foo
+- implicit none
+- integer*4 a
+- a=0
+- return
+- end
+-EOF
+-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+-public class foo {
+- private int a;
+- public void bar (void) {
+- a = 0;
+- }
+-};
+-EOF
+-])
+-dnl Parse the compiler output and extract the necessary
+-dnl objects, libraries and library flags.
+-if AC_TRY_EVAL(ac_compile); then
+- # Parse the compiler output and extract the necessary
+- # objects, libraries and library flags.
++# Sed that helps us avoid accidentally triggering echo(1) options like -n.
++Xsed="$SED -e 1s/^X//"
+
+- # Sentinel used to keep track of whether or not we are before
+- # the conftest object file.
+- pre_test_object_deps_done=no
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+- # The `*' in the case matches for architectures that use `case' in
+- # $output_verbose_cmd can trigger glob expansion during the loop
+- # eval without this substitution.
+- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
++# The names of the tagged configurations supported by this script.
++available_tags=
+
+- for p in `eval $output_verbose_link_cmd`; do
+- case $p in
++# ### BEGIN LIBTOOL CONFIG],
++[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+- -L* | -R* | -l*)
+- # Some compilers place space between "-{L,R}" and the path.
+- # Remove the space.
+- if test $p = "-L" \
+- || test $p = "-R"; then
+- prev=$p
+- continue
+- else
+- prev=
+- fi
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+- if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
+- # Internal compiler library paths should come after those
+- # provided the user. The postdeps already come after the
+- # user supplied libs so there is no need to process them.
+- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+- else
+- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+- fi
+- ;;
+- # The "-l" case would never come before the object being
+- # linked, so don't bother handling this case.
+- esac
+- else
+- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+- else
+- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+- fi
+- fi
+- ;;
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
+
+- *.$objext)
+- # This assumes that the test object file only shows up
+- # once in the compiler output.
+- if test "$p" = "conftest.$objext"; then
+- pre_test_object_deps_done=yes
+- continue
+- fi
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
+
+- if test "$pre_test_object_deps_done" = no; then
+- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+- _LT_AC_TAGVAR(predep_objects, $1)="$p"
+- else
+- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+- fi
+- else
+- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+- else
+- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+- fi
+- fi
+- ;;
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
+
+- *) ;; # Ignore the rest.
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+- esac
+- done
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+- # Clean up.
+- rm -f a.out a.exe
+-else
+- echo "libtool.m4: error: problem compiling $1 test program"
+-fi
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
+
+-$rm -f confest.$objext
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
+
+-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+-fi
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
+
+-# PORTME: override above test on systems where it is broken
+-ifelse([$1],[CXX],
+-[case $host_os in
+-interix[[3-9]]*)
+- # Interix 3.5 installs completely hosed .la files for C++, so rather than
+- # hack all around it, let's just trust "g++" to DTRT.
+- _LT_AC_TAGVAR(predep_objects,$1)=
+- _LT_AC_TAGVAR(postdep_objects,$1)=
+- _LT_AC_TAGVAR(postdeps,$1)=
+- ;;
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
+
+-linux*)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- #
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
+
+-solaris*)
+- case $cc_basename in
+- CC*)
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
++# A C compiler.
++LTCC=$lt_LTCC
+
+- # Adding this requires a known-good setup of shared libraries for
+- # Sun compiler versions before 5.6, else PIC objects from an old
+- # archive will be linked into the output, leading to subtle bugs.
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
+-esac
+-])
+-case " $_LT_AC_TAGVAR(postdeps, $1) " in
+-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+-esac
+-])# AC_LIBTOOL_POSTDEP_PREDEP
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
+
+-# AC_LIBTOOL_LANG_F77_CONFIG
+-# --------------------------
+-# Ensure that the configuration vars for the C compiler are
+-# suitably defined. Those variables are subsequently used by
+-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+-[AC_REQUIRE([AC_PROG_F77])
+-AC_LANG_PUSH(Fortran 77)
++# A language-specific compiler.
++CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+-_LT_AC_TAGVAR(always_export_symbols, $1)=no
+-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_AC_TAGVAR(hardcode_direct, $1)=no
+-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+-_LT_AC_TAGVAR(module_cmds, $1)=
+-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_AC_TAGVAR(no_undefined_flag, $1)=
+-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++# Is the compiler the GNU C compiler?
++with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+-# Source file extension for f77 test sources.
+-ac_ext=f
++# An ERE matcher.
++EGREP=$lt_EGREP
+
+-# Object file extension for compiled f77 test sources.
+-objext=o
+-_LT_AC_TAGVAR(objext, $1)=$objext
++# The linker used to build libraries.
++LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code="\
+- program t
+- end
+-"
++# A BSD-compatible nm program.
++NM=$lt_NM
+
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_AC_SYS_COMPILER
++# A symbol stripping program
++STRIP=$lt_STRIP
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
+
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-CC=${F77-"f77"}
+-compiler=$CC
+-_LT_AC_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
+
+-AC_MSG_CHECKING([if libtool supports shared libraries])
+-AC_MSG_RESULT([$can_build_shared])
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
+
+-AC_MSG_CHECKING([whether to build shared libraries])
+-test "$can_build_shared" = "no" && enable_shared=no
++# Used on cygwin: assembler.
++AS="$AS"
+
+-# On AIX, shared libraries and static libraries use the same namespace, and
+-# are all built from PIC.
+-case $host_os in
+-aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+-aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+-esac
+-AC_MSG_RESULT([$enable_shared])
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
+
+-AC_MSG_CHECKING([whether to build static libraries])
+-# Make sure either enable_shared or enable_static is yes.
+-test "$enable_shared" = yes || enable_static=yes
+-AC_MSG_RESULT([$enable_static])
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
+
+-_LT_AC_TAGVAR(GCC, $1)="$G77"
+-_LT_AC_TAGVAR(LD, $1)="$LD"
++# How to pass a linker flag through the compiler.
++wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+
+-AC_LIBTOOL_PROG_COMPILER_PIC($1)
+-AC_LIBTOOL_PROG_CC_C_O($1)
+-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+-AC_LIBTOOL_PROG_LD_SHLIBS($1)
+-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++# Object file suffix (normally "o").
++objext="$ac_objext"
+
+-AC_LIBTOOL_CONFIG($1)
++# Old archive suffix (normally "a").
++libext="$libext"
+
+-AC_LANG_POP
+-CC="$lt_save_CC"
+-])# AC_LIBTOOL_LANG_F77_CONFIG
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
+
++# Executable file suffix (normally "").
++exeext="$exeext"
+
+-# AC_LIBTOOL_LANG_GCJ_CONFIG
+-# --------------------------
+-# Ensure that the configuration vars for the C compiler are
+-# suitably defined. Those variables are subsequently used by
+-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+-[AC_LANG_SAVE
++# Additional compiler flags for building library objects.
++pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
++pic_mode=$pic_mode
+
+-# Source file extension for Java test sources.
+-ac_ext=java
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
+
+-# Object file extension for compiled Java test sources.
+-objext=o
+-_LT_AC_TAGVAR(objext, $1)=$objext
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="class foo {}"
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
+
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_AC_SYS_COMPILER
++# Do we need a version for libraries?
++need_version=$need_version
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
+
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-CC=${GCJ-"gcj"}
+-compiler=$CC
+-_LT_AC_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
+
+-# GCJ did not exist at the time GCC didn't implicitly link libc in.
+-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
+
+-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+
+-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+-AC_LIBTOOL_PROG_COMPILER_PIC($1)
+-AC_LIBTOOL_PROG_CC_C_O($1)
+-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+-AC_LIBTOOL_PROG_LD_SHLIBS($1)
+-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+
+-AC_LIBTOOL_CONFIG($1)
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+
+-AC_LANG_RESTORE
+-CC="$lt_save_CC"
+-])# AC_LIBTOOL_LANG_GCJ_CONFIG
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+
+-# AC_LIBTOOL_LANG_RC_CONFIG
+-# -------------------------
+-# Ensure that the configuration vars for the Windows resource compiler are
+-# suitably defined. Those variables are subsequently used by
+-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+-[AC_LANG_SAVE
++# Library versioning type.
++version_type=$version_type
+
+-# Source file extension for RC test sources.
+-ac_ext=rc
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
+
+-# Object file extension for compiled RC test sources.
+-objext=o
+-_LT_AC_TAGVAR(objext, $1)=$objext
++# List of archive names. First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code="$lt_simple_compile_test_code"
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_AC_SYS_COMPILER
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-CC=${RC-"windres"}
+-compiler=$CC
+-_LT_AC_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
+-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
++archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
+
+-AC_LIBTOOL_CONFIG($1)
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
++module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
+-AC_LANG_RESTORE
+-CC="$lt_save_CC"
+-])# AC_LIBTOOL_LANG_RC_CONFIG
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
+
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+-# AC_LIBTOOL_CONFIG([TAGNAME])
+-# ----------------------------
+-# If TAGNAME is not passed, then create an initial libtool script
+-# with a default configuration from the untagged config vars. Otherwise
+-# add code to config.status for appending the configuration named by
+-# TAGNAME from the matching tagged config vars.
+-AC_DEFUN([AC_LIBTOOL_CONFIG],
+-[# The else clause should only fire when bootstrapping the
+-# libtool distribution, otherwise you forgot to ship ltmain.sh
+-# with your package, and you will get complaints that there are
+-# no rules to generate ltmain.sh.
+-if test -f "$ltmain"; then
+- # See if we are running on zsh, and set the options which allow our commands through
+- # without removal of \ escapes.
+- if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+- fi
+- # Now quote all the things that may contain metacharacters while being
+- # careful not to overquote the AC_SUBSTed values. We take copies of the
+- # variables and quote the copies for generation of the libtool script.
+- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+- SED SHELL STRIP \
+- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+- deplibs_check_method reload_flag reload_cmds need_locks \
+- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+- lt_cv_sys_global_symbol_to_c_name_address \
+- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+- old_postinstall_cmds old_postuninstall_cmds \
+- _LT_AC_TAGVAR(compiler, $1) \
+- _LT_AC_TAGVAR(CC, $1) \
+- _LT_AC_TAGVAR(LD, $1) \
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+- _LT_AC_TAGVAR(old_archive_cmds, $1) \
+- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+- _LT_AC_TAGVAR(predep_objects, $1) \
+- _LT_AC_TAGVAR(postdep_objects, $1) \
+- _LT_AC_TAGVAR(predeps, $1) \
+- _LT_AC_TAGVAR(postdeps, $1) \
+- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
+- _LT_AC_TAGVAR(archive_cmds, $1) \
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+- _LT_AC_TAGVAR(postinstall_cmds, $1) \
+- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+- _LT_AC_TAGVAR(no_undefined_flag, $1) \
+- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+- _LT_AC_TAGVAR(hardcode_automatic, $1) \
+- _LT_AC_TAGVAR(module_cmds, $1) \
+- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+- _LT_AC_TAGVAR(fix_srcfile_path, $1) \
+- _LT_AC_TAGVAR(exclude_expsyms, $1) \
+- _LT_AC_TAGVAR(include_expsyms, $1); do
+-
+- case $var in
+- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+- _LT_AC_TAGVAR(archive_cmds, $1) | \
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+- _LT_AC_TAGVAR(module_cmds, $1) | \
+- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+- extract_expsyms_cmds | reload_cmds | finish_cmds | \
+- postinstall_cmds | postuninstall_cmds | \
+- old_postinstall_cmds | old_postuninstall_cmds | \
+- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+- # Double-quote double-evaled strings.
+- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+- ;;
+- *)
+- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+- ;;
+- esac
+- done
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+- case $lt_echo in
+- *'\[$]0 --fallback-echo"')
+- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+- ;;
+- esac
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+-ifelse([$1], [],
+- [cfgfile="${ofile}T"
+- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+- $rm -f "$cfgfile"
+- AC_MSG_NOTICE([creating $ofile])],
+- [cfgfile="$ofile"])
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+- cat <<__EOF__ >> "$cfgfile"
+-ifelse([$1], [],
+-[#! $SHELL
++# The directories searched by this compiler when creating a shared
++# library
++compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+
+-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+-# Free Software Foundation, Inc.
+-#
+-# This file is part of GNU Libtool:
+-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
+-# (at your option) any later version.
+-#
+-# This program is distributed in the hope that it will be useful, but
+-# WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+-# General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+-#
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+-# A sed program that does not truncate output.
+-SED=$lt_SED
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
+
+-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+-Xsed="$SED -e 1s/^X//"
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+
+-# The names of the tagged configurations supported by this script.
+-available_tags=
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+
+-# ### BEGIN LIBTOOL CONFIG],
+-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
+
+-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
+
+-# Shell to use when invoking shell scripts.
+-SHELL=$lt_SHELL
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+-# Whether or not to build shared libraries.
+-build_libtool_libs=$enable_shared
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+-# Whether or not to build static libraries.
+-build_old_libs=$enable_static
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+-# Whether or not to add -lc for building shared libraries.
+-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
+
+-# Whether or not to disallow shared libs when runtime libs are static
+-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
+
+-# Whether or not to optimize for fast installation.
+-fast_install=$enable_fast_install
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+-# The host system.
+-host_alias=$host_alias
+-host=$host
+-host_os=$host_os
++# How to hardcode a shared library path into an executable.
++hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+
+-# The build system.
+-build_alias=$build_alias
+-build=$build
+-build_os=$build_os
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
+
+-# An echo program that does not interpret backslashes.
+-echo=$lt_echo
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+-# The archiver.
+-AR=$lt_AR
+-AR_FLAGS=$lt_AR_FLAGS
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+
+-# A C compiler.
+-LTCC=$lt_LTCC
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+
+-# LTCC compiler flags.
+-LTCFLAGS=$lt_LTCFLAGS
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+
+-# A language-specific compiler.
+-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+
+-# Is the compiler the GNU C compiler?
+-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+-# An ERE matcher.
+-EGREP=$lt_EGREP
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+
+-# The linker used to build libraries.
+-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
+
+-# Whether we need hard or soft links.
+-LN_S=$lt_LN_S
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+
+-# A BSD-compatible nm program.
+-NM=$lt_NM
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+-# A symbol stripping program
+-STRIP=$lt_STRIP
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+-# Used to examine libraries when file_magic_cmd begins "file"
+-MAGIC_CMD=$MAGIC_CMD
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path=$lt_fix_srcfile_path
+
+-# Used on cygwin: DLL creation program.
+-DLLTOOL="$DLLTOOL"
++# Set to yes if exported symbols are required.
++always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+
+-# Used on cygwin: object dumper.
+-OBJDUMP="$OBJDUMP"
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+
+-# Used on cygwin: assembler.
+-AS="$AS"
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+-# The name of the directory that contains temporary libtool files.
+-objdir=$objdir
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+
+-# How to create reloadable object files.
+-reload_flag=$lt_reload_flag
+-reload_cmds=$lt_reload_cmds
+-
+-# How to pass a linker flag through the compiler.
+-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+-
+-# Object file suffix (normally "o").
+-objext="$ac_objext"
+-
+-# Old archive suffix (normally "a").
+-libext="$libext"
+-
+-# Shared library suffix (normally ".so").
+-shrext_cmds='$shrext_cmds'
+-
+-# Executable file suffix (normally "").
+-exeext="$exeext"
+-
+-# Additional compiler flags for building library objects.
+-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+-pic_mode=$pic_mode
+-
+-# What is the maximum length of a command?
+-max_cmd_len=$lt_cv_sys_max_cmd_len
+-
+-# Does compiler simultaneously support -c and -o options?
+-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+-
+-# Must we lock files when doing compilation?
+-need_locks=$lt_need_locks
+-
+-# Do we need the lib prefix for modules?
+-need_lib_prefix=$need_lib_prefix
+-
+-# Do we need a version for libraries?
+-need_version=$need_version
+-
+-# Whether dlopen is supported.
+-dlopen_support=$enable_dlopen
+-
+-# Whether dlopen of programs is supported.
+-dlopen_self=$enable_dlopen_self
+-
+-# Whether dlopen of statically linked programs is supported.
+-dlopen_self_static=$enable_dlopen_self_static
+-
+-# Compiler flag to prevent dynamic linking.
+-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+-
+-# Compiler flag to turn off builtin functions.
+-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+-
+-# Compiler flag to allow reflexive dlopens.
+-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+-
+-# Compiler flag to generate shared objects directly from archives.
+-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+-
+-# Compiler flag to generate thread-safe objects.
+-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+-
+-# Library versioning type.
+-version_type=$version_type
+-
+-# Format of library name prefix.
+-libname_spec=$lt_libname_spec
+-
+-# List of archive names. First name is the real one, the rest are links.
+-# The last name is the one that the linker finds with -lNAME.
+-library_names_spec=$lt_library_names_spec
+-
+-# The coded name of the library, if different from the real name.
+-soname_spec=$lt_soname_spec
+-
+-# Commands used to build and install an old-style archive.
+-RANLIB=$lt_RANLIB
+-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+-old_postinstall_cmds=$lt_old_postinstall_cmds
+-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+-
+-# Create an old-style archive from a shared archive.
+-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+-
+-# Create a temporary old-style archive to link instead of a shared archive.
+-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+-
+-# Commands used to build and install a shared archive.
+-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+-postinstall_cmds=$lt_postinstall_cmds
+-postuninstall_cmds=$lt_postuninstall_cmds
+-
+-# Commands used to build a loadable module (assumed same as above if empty)
+-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+-
+-# Commands to strip libraries.
+-old_striplib=$lt_old_striplib
+-striplib=$lt_striplib
+-
+-# Dependencies to place before the objects being linked to create a
+-# shared library.
+-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+-
+-# Dependencies to place after the objects being linked to create a
+-# shared library.
+-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+-
+-# Dependencies to place before the objects being linked to create a
+-# shared library.
+-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+-
+-# Dependencies to place after the objects being linked to create a
+-# shared library.
+-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+-
+-# The directories searched by this compiler when creating a shared
+-# library
+-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+-
+-# The library search path used internally by the compiler when linking
+-# a shared library.
+-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+-
+-# Method to check whether dependent libraries are shared objects.
+-deplibs_check_method=$lt_deplibs_check_method
+-
+-# Command to use when deplibs_check_method == file_magic.
+-file_magic_cmd=$lt_file_magic_cmd
+-
+-# Flag that allows shared libraries with undefined symbols to be built.
+-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+-
+-# Flag that forces no undefined symbols.
+-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+-
+-# Commands used to finish a libtool library installation in a directory.
+-finish_cmds=$lt_finish_cmds
+-
+-# Same as above, but a single script fragment to be evaled but not shown.
+-finish_eval=$lt_finish_eval
+-
+-# Take the output of nm and produce a listing of raw symbols and C names.
+-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+-
+-# Transform the output of nm in a proper C declaration
+-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+-
+-# Transform the output of nm in a C name address pair
+-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+-
+-# This is the shared library runtime path variable.
+-runpath_var=$runpath_var
+-
+-# This is the shared library path variable.
+-shlibpath_var=$shlibpath_var
+-
+-# Is shlibpath searched before the hard-coded library search path?
+-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+-
+-# How to hardcode a shared library path into an executable.
+-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+-
+-# Whether we should hardcode library paths into libraries.
+-hardcode_into_libs=$hardcode_into_libs
+-
+-# Flag to hardcode \$libdir into a binary during linking.
+-# This must work even if \$libdir does not exist.
+-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+-
+-# If ld is used when linking, flag to hardcode \$libdir into
+-# a binary during linking. This must work even if \$libdir does
+-# not exist.
+-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+-
+-# Whether we need a single -rpath flag with a separated argument.
+-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+-
+-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+-# resulting binary.
+-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+-
+-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+-# resulting binary.
+-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+-
+-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+-# the resulting binary.
+-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+-
+-# Set to yes if building a shared library automatically hardcodes DIR into the library
+-# and all subsequent libraries and executables linked against it.
+-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+-
+-# Variables whose values should be saved in libtool wrapper scripts and
+-# restored at relink time.
+-variables_saved_for_relink="$variables_saved_for_relink"
+-
+-# Whether libtool must link a program against all its dependency libraries.
+-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+-
+-# Compile-time system search path for libraries
+-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+-
+-# Run-time system search path for libraries
+-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+-
+-# Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path=$lt_fix_srcfile_path
+-
+-# Set to yes if exported symbols are required.
+-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+-
+-# The commands to list exported symbols.
+-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+-
+-# The commands to extract the exported symbol list from a shared archive.
+-extract_expsyms_cmds=$lt_extract_expsyms_cmds
+-
+-# Symbols that should not be listed in the preloaded symbols.
+-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+-
+-# Symbols that must always be exported.
+-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
++# Symbols that must always be exported.
++include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+
+ ifelse([$1],[],
+ [# ### END LIBTOOL CONFIG],
+@@ -6272,7 +5405,7 @@ AC_MSG_CHECKING([for $compiler option to
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+@@ -6327,1556 +5460,2438 @@ AC_MSG_CHECKING([for $compiler option to
+ *)
+ ;;
+ esac
+- ;;
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- ;;
+- *)
+- ;;
++ ;;
++ tandem*)
++ case $cc_basename in
++ NCC*)
++ # NonStop-UX NCC 3.20
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ case $cc_basename in
++ CC*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ esac
++ ;;
++ vxworks*)
++ ;;
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++ esac
++ fi
++],
++[
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++ case $host_os in
++ aix*)
++ # All AIX code is PIC.
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ fi
++ ;;
++
++ amigaos*)
++ # FIXME: we need at least 68020 code to build shared libraries, but
++ # adding the `-m68020' flag to GCC prevents building anything better,
++ # like `-m68040'.
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++ ;;
++
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++ # PIC is the default for these OSes.
++ ;;
++
++ mingw* | cygwin* | pw32* | os2*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ # Although the cygwin gcc ignores -fPIC, still need this for old-style
++ # (--disable-auto-import) libraries
++ m4_if([$1], [GCJ], [],
++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
++
++ darwin* | rhapsody*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++ ;;
++
++ interix[[3-9]]*)
++ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++ # Instead, we relocate shared libraries at runtime.
++ ;;
++
++ msdosdjgpp*)
++ # Just because we use GCC doesn't mean we suddenly get shared libraries
++ # on systems that don't support them.
++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ enable_shared=no
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++ fi
++ ;;
++
++ hpux*)
++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++ # not for PA HP-UX.
++ case $host_cpu in
++ hppa*64*|ia64*)
++ # +Z the default
++ ;;
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ esac
++ ;;
++
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ esac
++ else
++ # PORTME Check for flag to pass linker flags through the system compiler.
++ case $host_os in
++ aix*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ else
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++ fi
++ ;;
++ darwin*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ case $cc_basename in
++ xlc*)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ ;;
++ esac
++ ;;
++
++ mingw* | cygwin* | pw32* | os2*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
++
++ hpux9* | hpux10* | hpux11*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++ # not for PA HP-UX.
++ case $host_cpu in
++ hppa*64*|ia64*)
++ # +Z the default
++ ;;
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++ ;;
++ esac
++ # Is there a better lt_prog_compiler_static that works with the bundled CC?
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++ ;;
++
++ irix5* | irix6* | nonstopux*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # PIC (with -KPIC) is the default.
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++
++ newsos6)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ linux* | k*bsd*-gnu)
++ case $cc_basename in
++ icc* | ecc*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95*)
++ # Portland Group compilers (*not* the Pentium gcc compiler,
++ # which looks to be a dead project)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ ccc*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # All Alpha code is PIC.
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C 5.9
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ ;;
++ *Sun\ F*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++
++ osf3* | osf4* | osf5*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # All OSF/1 code is PIC.
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++
++ rdos*)
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++
++ solaris*)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ case $cc_basename in
++ f77* | f90* | f95*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
++ esac
++ ;;
++
++ sunos4*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ sysv4 | sysv4.2uw2* | sysv4.3*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec ;then
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ fi
++ ;;
++
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ unicos*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++
++ uts4*)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++ esac
++ fi
++])
++AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
++ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
++ _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
++ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
++ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
++ "" | " "*) ;;
++ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
++ esac],
++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
++fi
++case $host_os in
++ # For platforms which do not support PIC, -DPIC is meaningless:
++ *djgpp*)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++ ;;
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
++ ;;
++esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
++ _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
++ $lt_tmp_static_flag,
++ [],
++ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
++])
++
++
++# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
++# ------------------------------------
++# See if the linker supports building shared libraries.
++AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++ifelse([$1],[CXX],[
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ case $host_os in
++ aix[[4-9]]*)
++ # If we're using GNU nm, then we don't want the "-C" option.
++ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++ else
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++ fi
++ ;;
++ pw32*)
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
++ ;;
++ cygwin* | mingw*)
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ ;;
++ linux* | k*bsd*-gnu)
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++ ;;
++ *)
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ ;;
++ esac
++ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++],[
++ runpath_var=
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++ _LT_AC_TAGVAR(archive_cmds, $1)=
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
++ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
++ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
++ _LT_AC_TAGVAR(module_cmds, $1)=
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
++ _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ # include_expsyms should be a list of space-separated symbols to be *always*
++ # included in the symbol list
++ _LT_AC_TAGVAR(include_expsyms, $1)=
++ # exclude_expsyms can be an extended regexp of symbols to exclude
++ # it will be wrapped by ` (' and `)$', so one must not match beginning or
++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++ # as well as any symbol that contains `d'.
++ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++ # platforms (ab)use it in PIC code, but their linkers get confused if
++ # the symbol is explicitly referenced. Since portable code cannot
++ # rely on this symbol name, it's probably fine to never include it in
++ # preloaded symbol tables.
++ # Exclude shared library initialization/finalization symbols.
++dnl Note also adjust exclude_expsyms for C++ above.
++ extract_expsyms_cmds=
++ # Just being paranoid about ensuring that cc_basename is set.
++ _LT_CC_BASENAME([$compiler])
++ case $host_os in
++ cygwin* | mingw* | pw32*)
++ # FIXME: the MSVC++ port hasn't been tested in a loooong time
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ if test "$GCC" != yes; then
++ with_gnu_ld=no
++ fi
++ ;;
++ interix*)
++ # we just hope/assume this is gcc and not c89 (= MSVC++)
++ with_gnu_ld=yes
++ ;;
++ openbsd*)
++ with_gnu_ld=no
++ ;;
++ esac
++
++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
++ if test "$with_gnu_ld" = yes; then
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ wlarc='${wl}'
++
++ # Set some defaults for GNU ld with shared library support. These
++ # are reset later if shared libraries are not supported. Putting them
++ # here allows them to be overridden if necessary.
++ runpath_var=LD_RUN_PATH
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ supports_anon_versioning=no
++ case `$LD -v 2>/dev/null` in
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++ *\ 2.11.*) ;; # other 2.11 versions
++ *) supports_anon_versioning=yes ;;
++ esac
++
++ # See if GNU ld supports shared libraries.
++ case $host_os in
++ aix[[3-9]]*)
++ # On AIX/PPC, the GNU linker is very broken
++ if test "$host_cpu" != ia64; then
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ cat <<EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support. If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++EOF
++ fi
++ ;;
++
++ amigaos*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++
++ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
++ # that the semantics of dynamic libraries on AmigaOS, at least up
++ # to version 4, is to share data among multiple programs linked
++ # with the same dynamic library. Since this doesn't match the
++ # behavior of shared libraries on other platforms, we can't use
++ # them.
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ beos*)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ cygwin* | mingw* | pw32*)
++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++
++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ interix[[3-9]]*)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++
++ gnu* | linux* | k*bsd*-gnu)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ tmp_addflag=
++ case $cc_basename,$host_cpu in
++ pgcc*) # Portland Group C compiler
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag'
++ ;;
++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag -Mnomain' ;;
++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
++ tmp_addflag=' -i_dynamic' ;;
++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
++ tmp_addflag=' -i_dynamic -nofor_main' ;;
++ ifc* | ifort*) # Intel Fortran compiler
++ tmp_addflag=' -nofor_main' ;;
++ esac
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*) # Sun C 5.9
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_sharedflag='-G' ;;
++ *Sun\ F*) # Sun Fortran 8.3
++ tmp_sharedflag='-G' ;;
++ *)
++ tmp_sharedflag='-shared' ;;
++ esac
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++ if test $supports_anon_versioning = yes; then
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ $echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++ wlarc=
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ fi
++ ;;
++
++ solaris*)
++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ cat <<EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++EOF
++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++ case `$LD -v 2>&1` in
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++ ;;
++ *)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ sunos4*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ wlarc=
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ *)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++
++ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
++ runpath_var=
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ else
++ # PORTME fill in a description of your system's linker (not GNU ld)
++ case $host_os in
++ aix3*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++ # Note: this linker hardcodes the directories in LIBPATH if there
++ # are no directories specified by -L.
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++ # Neither direct hardcoding nor static linking is supported with a
++ # broken collect2.
++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
++ fi
++ ;;
++
++ aix[[4-9]]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ # If we're using GNU nm, then we don't want the "-C" option.
++ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++ else
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++ fi
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ ;;
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++ _LT_AC_TAGVAR(archive_cmds, $1)=''
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++
++ if test "$GCC" = yes; then
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" && \
++ strings "$collect2name" | grep resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++ fi
++ ;;
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
++
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
++ # Determine the default libpath from the value encoded in an empty executable.
++ _LT_AC_SYS_LIBPATH_AIX
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ else
++ if test "$host_cpu" = ia64; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an empty executable.
++ _LT_AC_SYS_LIBPATH_AIX
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++ # This is similar to how AIX traditionally builds its shared libraries.
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
++ fi
++ ;;
++
++ amigaos*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ # see comment about different semantics on the GNU ld section
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ bsdi[[45]]*)
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
++ ;;
++
++ cygwin* | mingw* | pw32*)
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ ;;
++
++ darwin* | rhapsody*)
++ case $host_os in
++ rhapsody* | darwin1.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
++ ;;
++ *) # Darwin 1.3 on
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
++ ;;
++ esac
++ fi
++ ;;
++ esac
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ if test "$GCC" = yes ; then
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++ else
++ case $cc_basename in
++ xlc*)
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ ;;
++ *)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ fi
++ ;;
++
++ dgux*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ freebsd1*)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++ # support. Future versions do this automatically, but an explicit c++rt0.o
++ # does not break anything, and helps significantly (at the cost of a little
++ # extra space).
++ freebsd2.2*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++ freebsd2*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++ freebsd* | dragonfly*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ hpux9*)
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ fi
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ ;;
++
++ hpux10*)
++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ fi
++ ;;
++
++ hpux11*)
++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ else
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
+ esac
+- ;;
+- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+- case $cc_basename in
+- CC*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ case $host_cpu in
++ hppa*64*|ia64*)
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++ *)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ ;;
+ esac
+- ;;
+- vxworks*)
+- ;;
+- *)
+- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+- esac
+- fi
+-],
+-[
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ fi
++ ;;
+
+- case $host_os in
+- aix*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ irix5* | irix6* | nonstopux*)
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ fi
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- amigaos*)
+- # FIXME: we need at least 68020 code to build shared libraries, but
+- # adding the `-m68020' flag to GCC prevents building anything better,
+- # like `-m68040'.
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
++ fi
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+- # PIC is the default for these OSes.
++ newsos6)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+- mingw* | cygwin* | pw32* | os2*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- # Although the cygwin gcc ignores -fPIC, still need this for old-style
+- # (--disable-auto-import) libraries
+- m4_if([$1], [GCJ], [],
+- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ else
++ case $host_os in
++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
+ ;;
+
+- darwin* | rhapsody*)
+- # PIC is the default on this platform
+- # Common symbols not allowed in MH_DYLIB files
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++ os2*)
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+- interix[[3-9]]*)
+- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+- # Instead, we relocate shared libraries at runtime.
++ osf3*)
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++ fi
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+- msdosdjgpp*)
+- # Just because we use GCC doesn't mean we suddenly get shared libraries
+- # on systems that don't support them.
+- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- enable_shared=no
+- ;;
++ osf4* | osf5*) # as osf3* with the addition of -msym flag
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ else
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++ # Both c and cxx compiler support -rpath directly
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+- hpux*)
+- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+- # not for PA HP-UX.
+- case $host_cpu in
+- hppa*64*|ia64*)
+- # +Z the default
+- ;;
++ solaris*)
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
++ if test "$GCC" = yes; then
++ wlarc='${wl}'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
++ else
++ wlarc=''
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
++ fi
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'. GCC discards it without `$wl',
++ # but is careful enough not to reorder.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ else
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ fi
+ ;;
+ esac
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- *)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- else
+- # PORTME Check for flag to pass linker flags through the system compiler.
+- case $host_os in
+- aix*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ sunos4*)
++ if test "x$host_vendor" = xsequent; then
++ # Use $CC to link under sequent, because it throws in some extra .o
++ # files that make .init and .fini sections work.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+- ;;
+- darwin*)
+- # PIC is the default on this platform
+- # Common symbols not allowed in MH_DYLIB files
+- case $cc_basename in
+- xlc*)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- ;;
+- esac
+- ;;
+-
+- mingw* | cygwin* | pw32* | os2*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- m4_if([$1], [GCJ], [],
+- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+- hpux9* | hpux10* | hpux11*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+- # not for PA HP-UX.
+- case $host_cpu in
+- hppa*64*|ia64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++ sysv4)
++ case $host_vendor in
++ sni)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+- esac
+- # Is there a better lt_prog_compiler_static that works with the bundled CC?
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- ;;
+-
+- irix5* | irix6* | nonstopux*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # PIC (with -KPIC) is the default.
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- newsos6)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- icc* | ecc*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- pgcc* | pgf77* | pgf90* | pgf95*)
+- # Portland Group compilers (*not* the Pentium gcc compiler,
+- # which looks to be a dead project)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- ccc*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # All Alpha code is PIC.
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ siemens)
++ ## LD is ld it makes a PLAMLIB
++ ## CC just makes a GrossModule.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C 5.9
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- ;;
+- *Sun\ F*)
+- # Sun Fortran 8.3 passes all unrecognized flags to the linker
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
+- ;;
+- esac
++ motorola)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
++ runpath_var='LD_RUN_PATH'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+- osf3* | osf4* | osf5*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # All OSF/1 code is PIC.
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- rdos*)
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- solaris*)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- case $cc_basename in
+- f77* | f90* | f95*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+- *)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+- esac
++ sysv4.3*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+- sunos4*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var=LD_RUN_PATH
++ hardcode_runpath_var=yes
++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
++ fi
+ ;;
+
+- sysv4 | sysv4.2uw2* | sysv4.3*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
+
+- sysv4*MP*)
+- if test -d /usr/nec ;then
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
+
+- unicos*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
+ ;;
+
+ uts4*)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ fi
+ ])
+-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ #
+-# Check to make sure the PIC flag actually works.
++# Do we need to explicitly link libc?
+ #
+-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+- _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
+- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+- "" | " "*) ;;
+- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+- esac],
+- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+-fi
+-case $host_os in
+- # For platforms which do not support PIC, -DPIC is meaningless:
+- *djgpp*)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+- ;;
+- *)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+- ;;
++case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
++x|xyes)
++ # Assume -lc should be added
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++
++ if test "$enable_shared" = yes && test "$GCC" = yes; then
++ case $_LT_AC_TAGVAR(archive_cmds, $1) in
++ *'~'*)
++ # FIXME: we may have to deal with multi-command sequences.
++ ;;
++ '$CC '*)
++ # Test whether the compiler implicitly links with -lc since on some
++ # systems, -lgcc has to come before -lc. If gcc already passes -lc
++ # to ld, don't add -lc before -lgcc.
++ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
++ $rm conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
++ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
++ then
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ else
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++ fi
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++ else
++ cat conftest.err 1>&5
++ fi
++ $rm conftest*
++ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
++ ;;
++ esac
++ fi
++ ;;
+ esac
++])# AC_LIBTOOL_PROG_LD_SHLIBS
++
+
++# _LT_AC_FILE_LTDLL_C
++# -------------------
++# Be careful that the start marker always follows a newline.
++AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
++# /* ltdll.c starts here */
++# #define WIN32_LEAN_AND_MEAN
++# #include <windows.h>
++# #undef WIN32_LEAN_AND_MEAN
++# #include <stdio.h>
+ #
+-# Check to make sure the static flag actually works.
++# #ifndef __CYGWIN__
++# # ifdef __CYGWIN32__
++# # define __CYGWIN__ __CYGWIN32__
++# # endif
++# #endif
+ #
+-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+- _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+- $lt_tmp_static_flag,
+- [],
+- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+-])
++# #ifdef __cplusplus
++# extern "C" {
++# #endif
++# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
++# #ifdef __cplusplus
++# }
++# #endif
++#
++# #ifdef __CYGWIN__
++# #include <cygwin/cygwin_dll.h>
++# DECLARE_CYGWIN_DLL( DllMain );
++# #endif
++# HINSTANCE __hDllInstance_base;
++#
++# BOOL APIENTRY
++# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
++# {
++# __hDllInstance_base = hInst;
++# return TRUE;
++# }
++# /* ltdll.c ends here */
++])# _LT_AC_FILE_LTDLL_C
+
+
+-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+-# ------------------------------------
+-# See if the linker supports building shared libraries.
+-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+-ifelse([$1],[CXX],[
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- case $host_os in
+- aix[[4-9]]*)
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+- fi
+- ;;
+- pw32*)
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
+- cygwin* | mingw*)
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+- ;;
+- *)
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- esac
+- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+-],[
+- runpath_var=
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+- _LT_AC_TAGVAR(archive_cmds, $1)=
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+- _LT_AC_TAGVAR(module_cmds, $1)=
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- # include_expsyms should be a list of space-separated symbols to be *always*
+- # included in the symbol list
+- _LT_AC_TAGVAR(include_expsyms, $1)=
+- # exclude_expsyms can be an extended regexp of symbols to exclude
+- # it will be wrapped by ` (' and `)$', so one must not match beginning or
+- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+- # as well as any symbol that contains `d'.
+- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+- # platforms (ab)use it in PIC code, but their linkers get confused if
+- # the symbol is explicitly referenced. Since portable code cannot
+- # rely on this symbol name, it's probably fine to never include it in
+- # preloaded symbol tables.
+- # Exclude shared library initialization/finalization symbols.
+-dnl Note also adjust exclude_expsyms for C++ above.
+- extract_expsyms_cmds=
+- # Just being paranoid about ensuring that cc_basename is set.
+- _LT_CC_BASENAME([$compiler])
+- case $host_os in
+- cygwin* | mingw* | pw32*)
+- # FIXME: the MSVC++ port hasn't been tested in a loooong time
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- if test "$GCC" != yes; then
+- with_gnu_ld=no
+- fi
+- ;;
+- interix*)
+- # we just hope/assume this is gcc and not c89 (= MSVC++)
+- with_gnu_ld=yes
+- ;;
+- openbsd*)
+- with_gnu_ld=no
+- ;;
+- esac
++# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
++# ---------------------------------
++AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
++
++
++# old names
++AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
++AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
++AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
++AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
++AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
++AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
++AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+
+- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+- if test "$with_gnu_ld" = yes; then
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- wlarc='${wl}'
++# This is just to silence aclocal about the macro not being used
++ifelse([AC_DISABLE_FAST_INSTALL])
+
+- # Set some defaults for GNU ld with shared library support. These
+- # are reset later if shared libraries are not supported. Putting them
+- # here allows them to be overridden if necessary.
+- runpath_var=LD_RUN_PATH
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- supports_anon_versioning=no
+- case `$LD -v 2>/dev/null` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+- *\ 2.11.*) ;; # other 2.11 versions
+- *) supports_anon_versioning=yes ;;
+- esac
++AC_DEFUN([LT_AC_PROG_GCJ],
++[AC_CHECK_TOOL(GCJ, gcj, no)
++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
++ AC_SUBST(GCJFLAGS)
++])
+
+- # See if GNU ld supports shared libraries.
+- case $host_os in
+- aix[[3-9]]*)
+- # On AIX/PPC, the GNU linker is very broken
+- if test "$host_cpu" != ia64; then
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- cat <<EOF 1>&2
++AC_DEFUN([LT_AC_PROG_RC],
++[AC_CHECK_TOOL(RC, windres, no)
++])
+
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+-*** to be unable to reliably create shared libraries on AIX.
+-*** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
+
+-EOF
+- fi
+- ;;
++# Cheap backport of AS_EXECUTABLE_P and required macros
++# from Autoconf 2.59; we should not use $as_executable_p directly.
+
+- amigaos*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++# _AS_TEST_PREPARE
++# ----------------
++m4_ifndef([_AS_TEST_PREPARE],
++[m4_defun([_AS_TEST_PREPARE],
++[if test -x / >/dev/null 2>&1; then
++ as_executable_p='test -x'
++else
++ as_executable_p='test -f'
++fi
++])])# _AS_TEST_PREPARE
+
+- # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+- # that the semantics of dynamic libraries on AmigaOS, at least up
+- # to version 4, is to share data among multiple programs linked
+- # with the same dynamic library. Since this doesn't match the
+- # behavior of shared libraries on other platforms, we can't use
+- # them.
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
++# AS_EXECUTABLE_P
++# ---------------
++# Check whether a file is executable.
++m4_ifndef([AS_EXECUTABLE_P],
++[m4_defun([AS_EXECUTABLE_P],
++[AS_REQUIRE([_AS_TEST_PREPARE])dnl
++$as_executable_p $1[]dnl
++])])# AS_EXECUTABLE_P
+
+- beos*)
+- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
++# NOTE: This macro has been submitted for inclusion into #
++# GNU Autoconf as AC_PROG_SED. When it is available in #
++# a released version of Autoconf we should remove this #
++# macro and use it instead. #
++# LT_AC_PROG_SED
++# --------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible. Prefer GNU sed if found.
++AC_DEFUN([LT_AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for lt_ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+- ;;
++ done
++ done
++done
++IFS=$as_save_IFS
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++ test ! -f $lt_ac_sed && continue
++ cat /dev/null > conftest.in
++ lt_ac_count=0
++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++ # Check for GNU sed and select it if it is found.
++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++ lt_cv_path_SED=$lt_ac_sed
++ break
++ fi
++ while true; do
++ cat conftest.in conftest.in >conftest.tmp
++ mv conftest.tmp conftest.in
++ cp conftest.in conftest.nl
++ echo >>conftest.nl
++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++ cmp -s conftest.out conftest.nl || break
++ # 10000 chars as input seems more than enough
++ test $lt_ac_count -gt 10 && break
++ lt_ac_count=`expr $lt_ac_count + 1`
++ if test $lt_ac_count -gt $lt_ac_max; then
++ lt_ac_max=$lt_ac_count
++ lt_cv_path_SED=$lt_ac_sed
++ fi
++ done
++done
++])
++SED=$lt_cv_path_SED
++AC_SUBST([SED])
++AC_MSG_RESULT([$SED])
++])
+
+- cygwin* | mingw* | pw32*)
+- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
+- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
++#
++# Copyright © 2004 Scott James Remnant <scott at netsplit.com>.
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
+
+- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
++# PKG_PROG_PKG_CONFIG([MIN-VERSION])
++# ----------------------------------
++AC_DEFUN([PKG_PROG_PKG_CONFIG],
++[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
++m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
++fi
++if test -n "$PKG_CONFIG"; then
++ _pkg_min_version=m4_default([$1], [0.9.0])
++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
++ AC_MSG_RESULT([yes])
+ else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ AC_MSG_RESULT([no])
++ PKG_CONFIG=""
++ fi
++
++fi[]dnl
++])# PKG_PROG_PKG_CONFIG
+
+- interix[[3-9]]*)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
++# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
++#
++# Check to see whether a particular set of modules exists. Similar
++# to PKG_CHECK_MODULES(), but does not set variables or print errors.
++#
++#
++# Similar to PKG_CHECK_MODULES, make sure that the first instance of
++# this or PKG_CHECK_MODULES is called, or make sure to call
++# PKG_CHECK_EXISTS manually
++# --------------------------------------------------------------
++AC_DEFUN([PKG_CHECK_EXISTS],
++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
++if test -n "$PKG_CONFIG" && \
++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
++ m4_ifval([$2], [$2], [:])
++m4_ifvaln([$3], [else
++ $3])dnl
++fi])
++
++
++# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
++# ---------------------------------------------
++m4_define([_PKG_CONFIG],
++[if test -n "$PKG_CONFIG"; then
++ if test -n "$$1"; then
++ pkg_cv_[]$1="$$1"
++ else
++ PKG_CHECK_EXISTS([$3],
++ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
++ [pkg_failed=yes])
++ fi
++else
++ pkg_failed=untried
++fi[]dnl
++])# _PKG_CONFIG
+
+- gnu* | linux* | k*bsd*-gnu)
+- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- tmp_addflag=
+- case $cc_basename,$host_cpu in
+- pgcc*) # Portland Group C compiler
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag'
+- ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag -Mnomain' ;;
+- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+- tmp_addflag=' -i_dynamic' ;;
+- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+- tmp_addflag=' -i_dynamic -nofor_main' ;;
+- ifc* | ifort*) # Intel Fortran compiler
+- tmp_addflag=' -nofor_main' ;;
+- esac
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*) # Sun C 5.9
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_sharedflag='-G' ;;
+- *Sun\ F*) # Sun Fortran 8.3
+- tmp_sharedflag='-G' ;;
+- *)
+- tmp_sharedflag='-shared' ;;
+- esac
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++# _PKG_SHORT_ERRORS_SUPPORTED
++# -----------------------------
++AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
++ _pkg_short_errors_supported=yes
++else
++ _pkg_short_errors_supported=no
++fi[]dnl
++])# _PKG_SHORT_ERRORS_SUPPORTED
+
+- if test $supports_anon_versioning = yes; then
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- $echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+
+- netbsd*)
+- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+- wlarc=
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- fi
+- ;;
++# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
++# [ACTION-IF-NOT-FOUND])
++#
++#
++# Note that if there is a possibility the first call to
++# PKG_CHECK_MODULES might not happen, you should be sure to include an
++# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
++#
++#
++# --------------------------------------------------------------
++AC_DEFUN([PKG_CHECK_MODULES],
++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+- solaris*)
+- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- cat <<EOF 1>&2
++pkg_failed=no
++AC_MSG_CHECKING([for $1])
+
+-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+-*** create shared libraries on Solaris systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.9.1 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
++_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+-EOF
+- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
++and $1[]_LIBS to avoid the need to call pkg-config.
++See the pkg-config man page for more details.])
+
+- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
++if test $pkg_failed = yes; then
++ _PKG_SHORT_ERRORS_SUPPORTED
++ if test $_pkg_short_errors_supported = yes; then
++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
++ else
++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
++ fi
++ # Put the nasty error message in config.log where it belongs
++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+-*** reliably create shared libraries on SCO systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
++ ifelse([$4], , [AC_MSG_ERROR(dnl
++[Package requirements ($2) were not met:
+
+-_LT_EOF
+- ;;
+- *)
+- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
++$$1_PKG_ERRORS
+
+- sunos4*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- wlarc=
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++Consider adjusting the PKG_CONFIG_PATH environment variable if you
++installed software in a non-standard prefix.
+
+- *)
+- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
++_PKG_TEXT
++])],
++ [AC_MSG_RESULT([no])
++ $4])
++elif test $pkg_failed = untried; then
++ ifelse([$4], , [AC_MSG_FAILURE(dnl
++[The pkg-config script could not be found or is too old. Make sure it
++is in your PATH or set the PKG_CONFIG environment variable to the full
++path to pkg-config.
+
+- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+- runpath_var=
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- # PORTME fill in a description of your system's linker (not GNU ld)
+- case $host_os in
+- aix3*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+- # Note: this linker hardcodes the directories in LIBPATH if there
+- # are no directories specified by -L.
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+- # Neither direct hardcoding nor static linking is supported with a
+- # broken collect2.
+- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+- fi
+- ;;
++_PKG_TEXT
+
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+- fi
+- aix_use_runtimelinking=no
++To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
++ [$4])
++else
++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
++ AC_MSG_RESULT([yes])
++ ifelse([$3], , :, [$3])
++fi[]dnl
++])# PKG_CHECK_MODULES
+
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+- aix_use_runtimelinking=yes
+- break
+- fi
+- done
+- ;;
+- esac
++# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++# (This private macro should not be called outside this file.)
++AC_DEFUN([AM_AUTOMAKE_VERSION],
++[am__api_version='1.10'
++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
++dnl require some minimum version. Point them to the right macro.
++m4_if([$1], [1.10.1], [],
++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
++])
+
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++# _AM_AUTOCONF_VERSION(VERSION)
++# -----------------------------
++# aclocal traces this macro to find the Autoconf version.
++# This is a private macro too. Using m4_define simplifies
++# the logic in aclocal, which can simply ignore this definition.
++m4_define([_AM_AUTOCONF_VERSION], [])
+
+- _LT_AC_TAGVAR(archive_cmds, $1)=''
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++[AM_AUTOMAKE_VERSION([1.10.1])dnl
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+
+- if test "$GCC" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" && \
+- strings "$collect2name" | grep resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- ;;
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
++# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to export.
+- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an empty executable.
+- _LT_AC_SYS_LIBPATH_AIX
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an empty executable.
+- _LT_AC_SYS_LIBPATH_AIX
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared libraries.
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- amigaos*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- # see comment about different semantics on the GNU ld section
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
+
+- bsdi[[45]]*)
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+- ;;
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
+
+- cygwin* | mingw* | pw32*)
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- # hardcode_libdir_flag_spec is actually meaningless, as there is
+- # no search path for DLLs.
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- ;;
++# AM_CONDITIONAL -*- Autoconf -*-
+
+- darwin* | rhapsody*)
+- case $host_os in
+- rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+- ;;
+- *) # Darwin 1.3 on
+- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+- else
+- case ${MACOSX_DEPLOYMENT_TARGET} in
+- 10.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+- ;;
+- 10.*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+- ;;
+- esac
+- fi
+- ;;
+- esac
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- if test "$GCC" = yes ; then
+- output_verbose_link_cmd='echo'
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+- else
+- case $cc_basename in
+- xlc*)
+- output_verbose_link_cmd='echo'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- ;;
+- *)
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- fi
+- ;;
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- dgux*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# serial 8
+
+- freebsd1*)
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])dnl
++AC_SUBST([$1_FALSE])dnl
++_AM_SUBST_NOTMAKE([$1_TRUE])dnl
++_AM_SUBST_NOTMAKE([$1_FALSE])dnl
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
++else
++ $1_TRUE='#'
++ $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
+
+- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+- # support. Future versions do this automatically, but an explicit c++rt0.o
+- # does not break anything, and helps significantly (at the cost of a little
+- # extra space).
+- freebsd2.2*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+- freebsd2*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# serial 9
+
+- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd* | dragonfly*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+- hpux9*)
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
+
+- hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
++ [$1], CXX, [depcc="$CXX" am_compiler_list=],
++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++ [$1], UPC, [depcc="$UPC" am_compiler_list=],
++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
+
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
+
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- fi
+- ;;
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+- hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
++ case $depmode in
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
+ else
+- case $host_cpu in
+- hppa*64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
++ break
+ fi
+- if test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++ ;;
++ none) break ;;
++ esac
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this.
++ if depmode=$depmode \
++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
+
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_$1_dependencies_compiler_type=none
++fi
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
++])
+
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- fi
+- ;;
+
+- irix5* | irix6* | nonstopux*)
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
++])
+
+- netbsd*)
+- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+
+- newsos6)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])dnl
++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
++])
++
++# Generate code to set up dependency tracking. -*- Autoconf -*-
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- else
+- case $host_os in
+- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- ;;
+- esac
+- fi
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++#serial 3
+
+- os2*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+- ;;
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[for mf in $CONFIG_FILES; do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # Grep'ing the whole file is not good either: AIX grep has a line
++ # limit of 2048, but all sed's we know have understand at least 4000.
++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
++ dirpart=`AS_DIRNAME("$mf")`
++ else
++ continue
++ fi
++ # Extract the definition of DEPDIR, am__include, and am__quote
++ # from the Makefile without running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ am__include=`sed -n 's/^am__include = //p' < "$mf"`
++ test -z "am__include" && continue
++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ # Find all dependency output files, they are included files with
++ # $(DEPDIR) in their names. We invoke sed twice because it is the
++ # simplest approach to changing $(DEPDIR) to its actual value in the
++ # expansion.
++ for file in `sed -n "
++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`AS_DIRNAME(["$file"])`
++ AS_MKDIR_P([$dirpart/$fdir])
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++done
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+- osf3*)
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+
+- osf4* | osf5*) # as osf3* with the addition of -msym flag
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- else
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled. FIXME. This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
++])
+
+- # Both c and cxx compiler support -rpath directly
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
++# Do all the work for Automake. -*- Autoconf -*-
+
+- solaris*)
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+- if test "$GCC" = yes; then
+- wlarc='${wl}'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+- else
+- wlarc=''
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'. GCC discards it without `$wl',
+- # but is careful enough not to reorder.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- else
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- fi
+- ;;
+- esac
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- sunos4*)
+- if test "x$host_vendor" = xsequent; then
+- # Use $CC to link under sequent, because it throws in some extra .o
+- # files that make .init and .fini sections work.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# serial 13
+
+- sysv4)
+- case $host_vendor in
+- sni)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+- ;;
+- siemens)
+- ## LD is ld it makes a PLAMLIB
+- ## CC just makes a GrossModule.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- ;;
+- motorola)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+- ;;
+- esac
+- runpath_var='LD_RUN_PATH'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# This macro actually does too much. Some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
+
+- sysv4.3*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+- ;;
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.60])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++ fi
++fi
+
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var=LD_RUN_PATH
+- hardcode_runpath_var=yes
+- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+- fi
+- ;;
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
+
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++ [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_CC],
++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_CXX],
++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJC],
++ [_AM_DEPENDENCIES(OBJC)],
++ [define([AC_PROG_OBJC],
++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
++])
++])
+
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
+
+- uts4*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
+
+- *)
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- fi
+-])
+-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_arg=$1
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+ #
+-# Do we need to explicitly link libc?
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+ #
+-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+-x|xyes)
+- # Assume -lc should be added
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+- if test "$enable_shared" = yes && test "$GCC" = yes; then
+- case $_LT_AC_TAGVAR(archive_cmds, $1) in
+- *'~'*)
+- # FIXME: we may have to deal with multi-command sequences.
+- ;;
+- '$CC '*)
+- # Test whether the compiler implicitly links with -lc since on some
+- # systems, -lgcc has to come before -lc. If gcc already passes -lc
+- # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $rm conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++# serial 2
+
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- else
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+- fi
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $rm conftest*
+- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+- ;;
+- esac
+- fi
+- ;;
+-esac
+-])# AC_LIBTOOL_PROG_LD_SHLIBS
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
+
++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
++# From Jim Meyering
+
+-# _LT_AC_FILE_LTDLL_C
+-# -------------------
+-# Be careful that the start marker always follows a newline.
+-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+-# /* ltdll.c starts here */
+-# #define WIN32_LEAN_AND_MEAN
+-# #include <windows.h>
+-# #undef WIN32_LEAN_AND_MEAN
+-# #include <stdio.h>
+-#
+-# #ifndef __CYGWIN__
+-# # ifdef __CYGWIN32__
+-# # define __CYGWIN__ __CYGWIN32__
+-# # endif
+-# #endif
+-#
+-# #ifdef __cplusplus
+-# extern "C" {
+-# #endif
+-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+-# #ifdef __cplusplus
+-# }
+-# #endif
+-#
+-# #ifdef __CYGWIN__
+-# #include <cygwin/cygwin_dll.h>
+-# DECLARE_CYGWIN_DLL( DllMain );
+-# #endif
+-# HINSTANCE __hDllInstance_base;
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
+ #
+-# BOOL APIENTRY
+-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+-# {
+-# __hDllInstance_base = hInst;
+-# return TRUE;
+-# }
+-# /* ltdll.c ends here */
+-])# _LT_AC_FILE_LTDLL_C
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# serial 4
+
+-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+-# ---------------------------------
+-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
++AC_DEFUN([AM_MAINTAINER_MODE],
++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
++ dnl maintainer-mode is disabled by default
++ AC_ARG_ENABLE(maintainer-mode,
++[ --enable-maintainer-mode enable make rules and dependencies not useful
++ (and sometimes confusing) to the casual installer],
++ USE_MAINTAINER_MODE=$enableval,
++ USE_MAINTAINER_MODE=no)
++ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
++ MAINT=$MAINTAINER_MODE_TRUE
++ AC_SUBST(MAINT)dnl
++]
++)
+
++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+-# old names
+-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
+-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
+-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
++# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+-# This is just to silence aclocal about the macro not being used
+-ifelse([AC_DISABLE_FAST_INSTALL])
++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-AC_DEFUN([LT_AC_PROG_GCJ],
+-[AC_CHECK_TOOL(GCJ, gcj, no)
+- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+- AC_SUBST(GCJFLAGS)
+-])
++# serial 3
+
+-AC_DEFUN([LT_AC_PROG_RC],
+-[AC_CHECK_TOOL(RC, windres, no)
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo done
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
++ am__include=include
++ am__quote=
++ _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ fi
++fi
++AC_SUBST([am__include])
++AC_SUBST([am__quote])
++AC_MSG_RESULT([$_am_result])
++rm -f confinc confmf
+ ])
+
++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+-# Cheap backport of AS_EXECUTABLE_P and required macros
+-# from Autoconf 2.59; we should not use $as_executable_p directly.
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# _AS_TEST_PREPARE
+-# ----------------
+-m4_ifndef([_AS_TEST_PREPARE],
+-[m4_defun([_AS_TEST_PREPARE],
+-[if test -x / >/dev/null 2>&1; then
+- as_executable_p='test -x'
++# serial 5
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([missing])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
+ else
+- as_executable_p='test -f'
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
+ fi
+-])])# _AS_TEST_PREPARE
++])
+
+-# AS_EXECUTABLE_P
+-# ---------------
+-# Check whether a file is executable.
+-m4_ifndef([AS_EXECUTABLE_P],
+-[m4_defun([AS_EXECUTABLE_P],
+-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
+-$as_executable_p $1[]dnl
+-])])# AS_EXECUTABLE_P
++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# NOTE: This macro has been submitted for inclusion into #
+-# GNU Autoconf as AC_PROG_SED. When it is available in #
+-# a released version of Autoconf we should remove this #
+-# macro and use it instead. #
+-# LT_AC_PROG_SED
+-# --------------
+-# Check for a fully-functional sed program, that truncates
+-# as few characters as possible. Prefer GNU sed if found.
+-AC_DEFUN([LT_AC_PROG_SED],
+-[AC_MSG_CHECKING([for a sed that does not truncate output])
+-AC_CACHE_VAL(lt_cv_path_SED,
+-[# Loop through the user's path and test for sed and gsed.
+-# Then use that list of sed's as ones to test for truncation.
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+- IFS=$as_save_IFS
+- test -z "$as_dir" && as_dir=.
+- for lt_ac_prog in sed gsed; do
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+- fi
+- done
+- done
+-done
+-IFS=$as_save_IFS
+-lt_ac_max=0
+-lt_ac_count=0
+-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+-# along with /bin/sed that truncates output.
+-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+- test ! -f $lt_ac_sed && continue
+- cat /dev/null > conftest.in
+- lt_ac_count=0
+- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+- # Check for GNU sed and select it if it is found.
+- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+- lt_cv_path_SED=$lt_ac_sed
+- break
+- fi
+- while true; do
+- cat conftest.in conftest.in >conftest.tmp
+- mv conftest.tmp conftest.in
+- cp conftest.in conftest.nl
+- echo >>conftest.nl
+- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+- cmp -s conftest.out conftest.nl || break
+- # 10000 chars as input seems more than enough
+- test $lt_ac_count -gt 10 && break
+- lt_ac_count=`expr $lt_ac_count + 1`
+- if test $lt_ac_count -gt $lt_ac_max; then
+- lt_ac_max=$lt_ac_count
+- lt_cv_path_SED=$lt_ac_sed
+- fi
+- done
+-done
+-])
+-SED=$lt_cv_path_SED
+-AC_SUBST([SED])
+-AC_MSG_RESULT([$SED])
++# AM_PROG_MKDIR_P
++# ---------------
++# Check for `mkdir -p'.
++AC_DEFUN([AM_PROG_MKDIR_P],
++[AC_PREREQ([2.60])dnl
++AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
++dnl while keeping a definition of mkdir_p for backward compatibility.
++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
++dnl Makefile.ins that do not define MKDIR_P, so we do our own
++dnl adjustment using top_builddir (which is defined more often than
++dnl MKDIR_P).
++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
++case $mkdir_p in
++ [[\\/$]]* | ?:[[\\/]]*) ;;
++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
+ ])
+
+-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+-#
+-# Copyright © 2004 Scott James Remnant <scott at netsplit.com>.
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
+-# (at your option) any later version.
+-#
+-# This program is distributed in the hope that it will be useful, but
+-# WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+-# General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Helper functions for option handling. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+ #
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
++# serial 3
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
+ # ----------------------------------
+-AC_DEFUN([PKG_PROG_PKG_CONFIG],
+-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
+-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+- AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+-fi
+-if test -n "$PKG_CONFIG"; then
+- _pkg_min_version=m4_default([$1], [0.9.0])
+- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+- AC_MSG_RESULT([yes])
+- else
+- AC_MSG_RESULT([no])
+- PKG_CONFIG=""
+- fi
+-
+-fi[]dnl
+-])# PKG_PROG_PKG_CONFIG
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+-#
+-# Check to see whether a particular set of modules exists. Similar
+-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+-#
++# Check to make sure that the build environment is sane. -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
+ #
+-# Similar to PKG_CHECK_MODULES, make sure that the first instance of
+-# this or PKG_CHECK_MODULES is called, or make sure to call
+-# PKG_CHECK_EXISTS manually
+-# --------------------------------------------------------------
+-AC_DEFUN([PKG_CHECK_EXISTS],
+-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+-if test -n "$PKG_CONFIG" && \
+- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+- m4_ifval([$2], [$2], [:])
+-m4_ifvaln([$3], [else
+- $3])dnl
+-fi])
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# serial 4
+
+-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+-# ---------------------------------------------
+-m4_define([_PKG_CONFIG],
+-[if test -n "$$1"; then
+- pkg_cv_[]$1="$$1"
+- elif test -n "$PKG_CONFIG"; then
+- PKG_CHECK_EXISTS([$3],
+- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+- [pkg_failed=yes])
+- else
+- pkg_failed=untried
+-fi[]dnl
+-])# _PKG_CONFIG
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
++[AC_MSG_CHECKING([whether build environment is sane])
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments. Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
++ # -L didn't work.
++ set X `ls -t $srcdir/configure conftest.file`
++ fi
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+-# _PKG_SHORT_ERRORS_SUPPORTED
+-# -----------------------------
+-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+- _pkg_short_errors_supported=yes
+-else
+- _pkg_short_errors_supported=no
+-fi[]dnl
+-])# _PKG_SHORT_ERRORS_SUPPORTED
++ # If neither matched, then we have a broken ls. This can happen
++ # if, for instance, CONFIG_SHELL is bash and it inherits a
++ # broken ls alias from the environment. This has actually
++ # happened. Such a system could not be considered "sane".
++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
++alias in your environment])
++ fi
+
++ test "$[2]" = conftest.file
++ )
++then
++ # Ok.
++ :
++else
++ AC_MSG_ERROR([newly created file is older than distributed files!
++Check your system clock])
++fi
++AC_MSG_RESULT(yes)])
+
+-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+-# [ACTION-IF-NOT-FOUND])
+-#
+-#
+-# Note that if there is a possibility the first call to
+-# PKG_CHECK_MODULES might not happen, you should be sure to include an
+-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+-#
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+ #
+-# --------------------------------------------------------------
+-AC_DEFUN([PKG_CHECK_MODULES],
+-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-pkg_failed=no
+-AC_MSG_CHECKING([for $1])
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
++# Copyright (C) 2006 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+-and $1[]_LIBS to avoid the need to call pkg-config.
+-See the pkg-config man page for more details.])
++# _AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
++# This macro is traced by Automake.
++AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+-if test $pkg_failed = yes; then
+- _PKG_SHORT_ERRORS_SUPPORTED
+- if test $_pkg_short_errors_supported = yes; then
+- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+- else
+- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
+- fi
+- # Put the nasty error message in config.log where it belongs
+- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
++# Check how to create a tarball. -*- Autoconf -*-
+
+- ifelse([$4], , [AC_MSG_ERROR(dnl
+-[Package requirements ($2) were not met:
++# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-$$1_PKG_ERRORS
++# serial 2
+
+-Consider adjusting the PKG_CONFIG_PATH environment variable if you
+-installed software in a non-standard prefix.
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of `v7', `ustar', or `pax'.
++#
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++# tardir=directory && $(am__tar) > result.tar
++#
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++# $(am__untar) < result.tar
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility.
++AM_MISSING_PROG([AMTAR], [tar])
++m4_if([$1], [v7],
++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
++ [m4_case([$1], [ustar],, [pax],,
++ [m4_fatal([Unknown tar format])])
++AC_MSG_CHECKING([how to create a $1 tar archive])
++# Loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++_am_tools=${am_cv_prog_tar_$1-$_am_tools}
++# Do not fold the above two line into one, because Tru64 sh and
++# Solaris sh will not grok spaces in the rhs of `-'.
++for _am_tool in $_am_tools
++do
++ case $_am_tool in
++ gnutar)
++ for _am_tar in tar gnutar gtar;
++ do
++ AM_RUN_LOG([$_am_tar --version]) && break
++ done
++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++ am__untar="$_am_tar -xf -"
++ ;;
++ plaintar)
++ # Must skip GNU tar: if it does not support --format= it doesn't create
++ # ustar tarball either.
++ (tar --version) >/dev/null 2>&1 && continue
++ am__tar='tar chf - "$$tardir"'
++ am__tar_='tar chf - "$tardir"'
++ am__untar='tar xf -'
++ ;;
++ pax)
++ am__tar='pax -L -x $1 -w "$$tardir"'
++ am__tar_='pax -L -x $1 -w "$tardir"'
++ am__untar='pax -r'
++ ;;
++ cpio)
++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++ am__untar='cpio -i -H $1 -d'
++ ;;
++ none)
++ am__tar=false
++ am__tar_=false
++ am__untar=false
++ ;;
++ esac
+
+-_PKG_TEXT
+-])],
+- [AC_MSG_RESULT([no])
+- $4])
+-elif test $pkg_failed = untried; then
+- ifelse([$4], , [AC_MSG_FAILURE(dnl
+-[The pkg-config script could not be found or is too old. Make sure it
+-is in your PATH or set the PKG_CONFIG environment variable to the full
+-path to pkg-config.
++ # If the value was cached, stop now. We just wanted to have am__tar
++ # and am__untar set.
++ test -n "${am_cv_prog_tar_$1}" && break
+
+-_PKG_TEXT
++ # tar/untar a dummy directory, and stop if the command works
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ echo GrepMe > conftest.dir/file
++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++ rm -rf conftest.dir
++ if test -s conftest.tar; then
++ AM_RUN_LOG([$am__untar <conftest.tar])
++ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
++ fi
++done
++rm -rf conftest.dir
+
+-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
+- [$4])
+-else
+- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+- AC_MSG_RESULT([yes])
+- ifelse([$3], , :, [$3])
+-fi[]dnl
+-])# PKG_CHECK_MODULES
++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++AC_MSG_RESULT([$am_cv_prog_tar_$1])])
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
+
+Index: libgail-gnome-1.20.1/config.guess
+===================================================================
+--- libgail-gnome-1.20.1.orig/config.guess 2008-11-21 19:59:50.504859626 +0100
++++ libgail-gnome-1.20.1/config.guess 2008-11-21 20:00:39.068345837 +0100
+@@ -4,7 +4,7 @@
+ # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ # Free Software Foundation, Inc.
+
+-timestamp='2008-01-08'
++timestamp='2008-01-23'
+
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -1484,9 +1484,9 @@ This script, last modified $timestamp, h
+ the operating system you are using. It is advised that you
+ download the most up to date version of the config scripts from
+
+- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+ and
+- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+ If the version you run ($0) is already up to date, please
+ send the following data and any information you think might be
+Index: libgail-gnome-1.20.1/configure
+===================================================================
+--- libgail-gnome-1.20.1.orig/configure 2008-11-21 19:59:50.736864322 +0100
++++ libgail-gnome-1.20.1/configure 2008-11-21 20:00:39.968341019 +0100
+@@ -1,11 +1,11 @@
+ #! /bin/sh
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.62 for Gail GNOME 1.20.1.
++# Generated by GNU Autoconf 2.61 for Gail GNOME 1.20.1.
+ #
+ # Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=atk&component=gail>.
+ #
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+ ## --------------------- ##
+@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -39,45 +39,17 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
+ as_cr_digits='0123456789'
+ as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+-as_nl='
+-'
+-export as_nl
+-# Printing a long string crashes Solaris 7 /usr/bin/printf.
+-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+- as_echo='printf %s\n'
+- as_echo_n='printf %s'
+-else
+- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+- as_echo_n='/usr/ucb/echo -n'
+- else
+- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+- as_echo_n_body='eval
+- arg=$1;
+- case $arg in
+- *"$as_nl"*)
+- expr "X$arg" : "X\\(.*\\)$as_nl";
+- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+- esac;
+- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+- '
+- export as_echo_n_body
+- as_echo_n='sh -c $as_echo_n_body as_echo'
+- fi
+- export as_echo_body
+- as_echo='sh -c $as_echo_body as_echo'
+-fi
+-
+ # The user is always right.
+ if test "${PATH_SEPARATOR+set}" != set; then
+- PATH_SEPARATOR=:
+- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+- PATH_SEPARATOR=';'
+- }
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
++ PATH_SEPARATOR=';'
++ else
++ PATH_SEPARATOR=:
++ fi
++ rm -f conf$$.sh
+ fi
+
+ # Support unset when possible.
+@@ -93,6 +65,8 @@ fi
+ # there to prevent editors from complaining about space-tab.
+ # (If _AS_PATH_WALK were called with IFS unset, it would disable word
+ # splitting by setting IFS to empty value.)
++as_nl='
++'
+ IFS=" "" $as_nl"
+
+ # Find who we are. Look in the path if we contain no directory separator.
+@@ -115,7 +89,7 @@ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+ fi
+
+@@ -128,10 +102,17 @@ PS2='> '
+ PS4='+ '
+
+ # NLS nuisances.
+-LC_ALL=C
+-export LC_ALL
+-LANGUAGE=C
+-export LANGUAGE
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++ fi
++done
+
+ # Required to use basename.
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+@@ -153,7 +134,7 @@ as_me=`$as_basename -- "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X/"$0" |
++echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+@@ -179,7 +160,7 @@ else
+ as_have_required=no
+ fi
+
+- if test $as_have_required = yes && (eval ":
++ if test $as_have_required = yes && (eval ":
+ (as_func_return () {
+ (exit \$1)
+ }
+@@ -261,7 +242,7 @@ IFS=$as_save_IFS
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -282,7 +263,7 @@ _ASEOF
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -362,10 +343,10 @@ fi
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+- done
+- export CONFIG_SHELL
+- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++ done
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ fi
+
+
+@@ -434,10 +415,9 @@ fi
+
+ test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+- echo Please tell bug-autoconf at gnu.org about your system,
+- echo including any error possibly output before this message.
+- echo This can help us improve future autoconf versions.
+- echo Configuration will now proceed without shell functions.
++ echo Please tell autoconf at gnu.org about your system,
++ echo including any error possibly output before this
++ echo message
+ }
+
+
+@@ -473,7 +453,7 @@ test \$exitcode = 0") || {
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+@@ -501,6 +481,7 @@ case `echo -n x` in
+ *)
+ ECHO_N='-n';;
+ esac
++
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+@@ -513,22 +494,19 @@ if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+ else
+ rm -f conf$$.dir
+- mkdir conf$$.dir 2>/dev/null
++ mkdir conf$$.dir
+ fi
+-if (echo >conf$$.file) 2>/dev/null; then
+- if ln -s conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s='ln -s'
+- # ... but there are two gotchas:
+- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+- # In both cases, we have to default to `cp -p'.
+- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+- as_ln_s='cp -p'
+- elif ln conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s=ln
+- else
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+- fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+@@ -553,10 +531,10 @@ else
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+- test -d "$1/.";
++ test -d "$1/.";
+ else
+ case $1 in
+- -*)set "./$1";;
++ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+@@ -843,7 +821,6 @@ MAKEINFO
+ install_sh
+ STRIP
+ INSTALL_STRIP_PROGRAM
+-MKDIR_P
+ mkdir_p
+ AWK
+ SET_MAKE
+@@ -930,21 +907,6 @@ AM_LDFLAGS
+ LIBOBJS
+ LTLIBOBJS'
+ ac_subst_files=''
+-ac_user_opts='
+-enable_option_checking
+-enable_maintainer_mode
+-enable_dependency_tracking
+-enable_static
+-enable_shared
+-enable_fast_install
+-with_gnu_ld
+-enable_libtool_lock
+-with_pic
+-with_tags
+-enable_debug
+-enable_compile_warnings
+-enable_iso_c
+-'
+ ac_precious_vars='build_alias
+ host_alias
+ target_alias
+@@ -970,8 +932,6 @@ TEST_LIBS'
+ # Initialize some variables set by options.
+ ac_init_help=
+ ac_init_version=false
+-ac_unrecognized_opts=
+-ac_unrecognized_sep=
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+ cache_file=/dev/null
+@@ -1070,21 +1030,13 @@ do
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+- ac_useropt_orig=$ac_useropt
+- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+- case $ac_user_opts in
+- *"
+-"enable_$ac_useropt"
+-"*) ;;
+- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+- ac_unrecognized_sep=', ';;
+- esac
+- eval enable_$ac_useropt=no ;;
++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
++ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+@@ -1097,21 +1049,13 @@ do
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+- ac_useropt_orig=$ac_useropt
+- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+- case $ac_user_opts in
+- *"
+-"enable_$ac_useropt"
+-"*) ;;
+- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+- ac_unrecognized_sep=', ';;
+- esac
+- eval enable_$ac_useropt=\$ac_optarg ;;
++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
++ eval enable_$ac_feature=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -1302,38 +1246,22 @@ do
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+- ac_useropt_orig=$ac_useropt
+- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+- case $ac_user_opts in
+- *"
+-"with_$ac_useropt"
+-"*) ;;
+- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+- ac_unrecognized_sep=', ';;
+- esac
+- eval with_$ac_useropt=\$ac_optarg ;;
++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
++ eval with_$ac_package=\$ac_optarg ;;
+
+ -without-* | --without-*)
+- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+- ac_useropt_orig=$ac_useropt
+- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+- case $ac_user_opts in
+- *"
+-"with_$ac_useropt"
+-"*) ;;
+- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+- ac_unrecognized_sep=', ';;
+- esac
+- eval with_$ac_useropt=no ;;
++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
++ eval with_$ac_package=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+@@ -1353,7 +1281,7 @@ do
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
++ -*) { echo "$as_me: error: unrecognized option: $ac_option
+ Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+@@ -1362,16 +1290,16 @@ Try \`$0 --help' for more information."
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+@@ -1380,38 +1308,22 @@ done
+
+ if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
++ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+ fi
+
+-if test -n "$ac_unrecognized_opts"; then
+- case $enable_option_checking in
+- no) ;;
+- fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2
+- { (exit 1); exit 1; }; } ;;
+- *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;;
+- esac
+-fi
+-
+-# Check all directory arguments for consistency.
++# Be sure to have absolute directory names.
+ for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+ do
+ eval ac_val=\$$ac_var
+- # Remove trailing slashes.
+- case $ac_val in
+- */ )
+- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+- eval $ac_var=\$ac_val;;
+- esac
+- # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
+ done
+
+@@ -1426,7 +1338,7 @@ target=$target_alias
+ if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+@@ -1442,10 +1354,10 @@ test "$silent" = yes && exec 6>/dev/null
+ ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ ac_ls_di=`ls -di .` &&
+ ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+- { $as_echo "$as_me: error: Working directory cannot be determined" >&2
++ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
++ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+@@ -1453,12 +1365,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+- ac_confdir=`$as_dirname -- "$as_myself" ||
+-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$as_myself" : 'X\(//\)[^/]' \| \
+- X"$as_myself" : 'X\(//\)$' \| \
+- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$as_myself" |
++ ac_confdir=`$as_dirname -- "$0" ||
++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$0" : 'X\(//\)[^/]' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -1485,12 +1397,12 @@ else
+ fi
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ ac_abs_confdir=`(
+- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
+ pwd)`
+ # When building in place, set srcdir=.
+@@ -1539,9 +1451,9 @@ Configuration:
+
+ Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
++ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [PREFIX]
++ [PREFIX]
+
+ By default, \`make install' will install all the files in
+ \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+@@ -1551,25 +1463,25 @@ for instance \`--prefix=\$HOME'.
+ For better control, use the options below.
+
+ Fine tuning of the installation directories:
+- --bindir=DIR user executables [EPREFIX/bin]
+- --sbindir=DIR system admin executables [EPREFIX/sbin]
+- --libexecdir=DIR program executables [EPREFIX/libexec]
+- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+- --libdir=DIR object code libraries [EPREFIX/lib]
+- --includedir=DIR C header files [PREFIX/include]
+- --oldincludedir=DIR C header files for non-gcc [/usr/include]
+- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+- --infodir=DIR info documentation [DATAROOTDIR/info]
+- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+- --mandir=DIR man documentation [DATAROOTDIR/man]
+- --docdir=DIR documentation root [DATAROOTDIR/doc/libgail-gnome]
+- --htmldir=DIR html documentation [DOCDIR]
+- --dvidir=DIR dvi documentation [DOCDIR]
+- --pdfdir=DIR pdf documentation [DOCDIR]
+- --psdir=DIR ps documentation [DOCDIR]
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
++ --infodir=DIR info documentation [DATAROOTDIR/info]
++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
++ --mandir=DIR man documentation [DATAROOTDIR/man]
++ --docdir=DIR documentation root [DATAROOTDIR/doc/libgail-gnome]
++ --htmldir=DIR html documentation [DOCDIR]
++ --dvidir=DIR dvi documentation [DOCDIR]
++ --pdfdir=DIR pdf documentation [DOCDIR]
++ --psdir=DIR ps documentation [DOCDIR]
+ _ACEOF
+
+ cat <<\_ACEOF
+@@ -1592,7 +1504,6 @@ if test -n "$ac_init_help"; then
+ cat <<\_ACEOF
+
+ Optional Features:
+- --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode enable make rules and dependencies not useful
+@@ -1648,17 +1559,15 @@ fi
+ if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+- test -d "$ac_dir" ||
+- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+- continue
++ test -d "$ac_dir" || continue
+ ac_builddir=.
+
+ case "$ac_dir" in
+ .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *)
+- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+@@ -1694,7 +1603,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+@@ -1704,10 +1613,10 @@ test -n "$ac_init_help" && exit $ac_stat
+ if $ac_init_version; then
+ cat <<\_ACEOF
+ Gail GNOME configure 1.20.1
+-generated by GNU Autoconf 2.62
++generated by GNU Autoconf 2.61
+
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ This configure script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it.
+ _ACEOF
+@@ -1718,7 +1627,7 @@ This file contains any messages produced
+ running configure, to aid debugging if configure makes a mistake.
+
+ It was created by Gail GNOME $as_me 1.20.1, which was
+-generated by GNU Autoconf 2.62. Invocation command line was
++generated by GNU Autoconf 2.61. Invocation command line was
+
+ $ $0 $@
+
+@@ -1754,7 +1663,7 @@ for as_dir in $PATH
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- $as_echo "PATH: $as_dir"
++ echo "PATH: $as_dir"
+ done
+ IFS=$as_save_IFS
+
+@@ -1789,7 +1698,7 @@ do
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+@@ -1841,12 +1750,11 @@ _ASBOX
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+@@ -1876,9 +1784,9 @@ _ASBOX
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+- $as_echo "$ac_var='\''$ac_val'\''"
++ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+@@ -1893,9 +1801,9 @@ _ASBOX
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+- $as_echo "$ac_var='\''$ac_val'\''"
++ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+@@ -1911,8 +1819,8 @@ _ASBOX
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+- $as_echo "$as_me: caught signal $ac_signal"
+- $as_echo "$as_me: exit $exit_status"
++ echo "$as_me: caught signal $ac_signal"
++ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+@@ -1954,24 +1862,21 @@ _ACEOF
+
+
+ # Let the site file select an alternate cache file if it wants to.
+-# Prefer an explicitly selected file to automatically selected ones.
+-ac_site_file1=NONE
+-ac_site_file2=NONE
++# Prefer explicitly selected file to automatically selected ones.
+ if test -n "$CONFIG_SITE"; then
+- ac_site_file1=$CONFIG_SITE
++ set x "$CONFIG_SITE"
+ elif test "x$prefix" != xNONE; then
+- ac_site_file1=$prefix/share/config.site
+- ac_site_file2=$prefix/etc/config.site
++ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+ else
+- ac_site_file1=$ac_default_prefix/share/config.site
+- ac_site_file2=$ac_default_prefix/etc/config.site
++ set x "$ac_default_prefix/share/config.site" \
++ "$ac_default_prefix/etc/config.site"
+ fi
+-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
++shift
++for ac_site_file
+ do
+- test "x$ac_site_file" = xNONE && continue
+ if test -r "$ac_site_file"; then
+- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
++echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+@@ -1981,16 +1886,16 @@ if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+-$as_echo "$as_me: loading cache $cache_file" >&6;}
++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
++echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+ else
+- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+-$as_echo "$as_me: creating cache $cache_file" >&6;}
++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
++echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+ fi
+
+@@ -2004,38 +1909,29 @@ for ac_var in $ac_precious_vars; do
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+- # differences in whitespace do not lead to failure.
+- ac_old_val_w=`echo x $ac_old_val`
+- ac_new_val_w=`echo x $ac_new_val`
+- if test "$ac_old_val_w" != "$ac_new_val_w"; then
+- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+- ac_cache_corrupted=:
+- else
+- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+- eval $ac_var=\$ac_old_val
+- fi
+- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
++echo "$as_me: former value: $ac_old_val" >&2;}
++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
++echo "$as_me: current value: $ac_new_val" >&2;}
++ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+@@ -2045,10 +1941,10 @@ $as_echo "$as_me: current value: \`$ac
+ fi
+ done
+ if $ac_cache_corrupted; then
+- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
++echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -2103,8 +1999,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$s
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -2130,12 +2026,11 @@ ac_configure="$SHELL $ac_aux_dir/configu
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # OS/2's system install, which has a completely different semantic
+ # ./install, which can be erroneously created by make from ./install.sh.
+-# Reject install programs that cannot install multiple files.
+-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+-$as_echo_n "checking for a BSD-compatible install... " >&6; }
++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+ if test -z "$INSTALL"; then
+ if test "${ac_cv_path_install+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ for as_dir in $PATH
+@@ -2164,29 +2059,17 @@ case $as_dir/ in
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+- rm -rf conftest.one conftest.two conftest.dir
+- echo one > conftest.one
+- echo two > conftest.two
+- mkdir conftest.dir
+- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+- test -s conftest.one && test -s conftest.two &&
+- test -s conftest.dir/conftest.one &&
+- test -s conftest.dir/conftest.two
+- then
+- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+- break 3
+- fi
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+ esac
+-
+ done
+ IFS=$as_save_IFS
+
+-rm -rf conftest.one conftest.two conftest.dir
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+@@ -2199,8 +2082,8 @@ fi
+ INSTALL=$ac_install_sh
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+-$as_echo "$INSTALL" >&6; }
++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6; }
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+@@ -2210,8 +2093,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+-$as_echo_n "checking whether build environment is sane... " >&6; }
++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+ # Just in case
+ sleep 1
+ echo timestamp > conftest.file
+@@ -2234,9 +2117,9 @@ if (
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" >&5
+-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+@@ -2247,23 +2130,26 @@ then
+ # Ok.
+ :
+ else
+- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+ Check your system clock" >&5
+-$as_echo "$as_me: error: newly created file is older than distributed files!
++echo "$as_me: error: newly created file is older than distributed files!
+ Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++{ echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+ # Use a double $ so make ignores it.
+ test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+-# Double any \ or $.
++# Double any \ or $. echo might interpret backslashes.
+ # By default was `s,x,x', remove it if useless.
+-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
++cat <<\_ACEOF >conftest.sed
++s/[\\$]/&&/g;s/;s,x,x,$//
++_ACEOF
++program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
++rm -f conftest.sed
+
+ # expand $ac_aux_dir to an absolute path
+ am_aux_dir=`cd $ac_aux_dir && pwd`
+@@ -2274,15 +2160,15 @@ if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+ else
+ am_missing_run=
+- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
++{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
++echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+ if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+@@ -2317,8 +2203,8 @@ fi
+ MKDIR_P="$ac_install_sh -d"
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+-$as_echo "$MKDIR_P" >&6; }
++{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
++echo "${ECHO_T}$MKDIR_P" >&6; }
+
+ mkdir_p="$MKDIR_P"
+ case $mkdir_p in
+@@ -2330,10 +2216,10 @@ for ac_prog in gawk mawk nawk awk
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_AWK+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+@@ -2346,7 +2232,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2357,23 +2243,22 @@ fi
+ fi
+ AWK=$ac_cv_prog_AWK
+ if test -n "$AWK"; then
+- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+-$as_echo "$AWK" >&6; }
++ { echo "$as_me:$LINENO: result: $AWK" >&5
++echo "${ECHO_T}$AWK" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+ test -n "$AWK" && break
+ done
+
+-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+-set x ${MAKE-make}
+-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+ if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.make <<\_ACEOF
+ SHELL = /bin/sh
+@@ -2390,12 +2275,12 @@ esac
+ rm -f conftest.make
+ fi
+ if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ SET_MAKE=
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+
+@@ -2414,8 +2299,8 @@ if test "`cd $srcdir && pwd`" != "`pwd`"
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+@@ -2470,10 +2355,10 @@ if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_STRIP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+@@ -2486,7 +2371,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2497,11 +2382,11 @@ fi
+ fi
+ STRIP=$ac_cv_prog_STRIP
+ if test -n "$STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+-$as_echo "$STRIP" >&6; }
++ { echo "$as_me:$LINENO: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -2510,10 +2395,10 @@ if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+ set dummy strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+@@ -2526,7 +2411,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2537,11 +2422,11 @@ fi
+ fi
+ ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+ if test -n "$ac_ct_STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+-$as_echo "$ac_ct_STRIP" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_STRIP" = x; then
+@@ -2549,10 +2434,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -2579,8 +2464,8 @@ am__tar='${AMTAR} chof - "$$tardir"'; am
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+ # Check whether --enable-maintainer-mode was given.
+ if test "${enable_maintainer_mode+set}" = set; then
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+@@ -2588,8 +2473,8 @@ else
+ USE_MAINTAINER_MODE=no
+ fi
+
+- { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+-$as_echo "$USE_MAINTAINER_MODE" >&6; }
++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+@@ -2637,10 +2522,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}gcc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -2653,7 +2538,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2664,11 +2549,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+-$as_echo "$CC" >&6; }
++ { echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -2677,10 +2562,10 @@ if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+ set dummy gcc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+@@ -2693,7 +2578,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2704,11 +2589,11 @@ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-$as_echo "$ac_ct_CC" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_CC" = x; then
+@@ -2716,10 +2601,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -2734,10 +2619,10 @@ if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}cc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -2750,7 +2635,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2761,11 +2646,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+-$as_echo "$CC" >&6; }
++ { echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -2774,10 +2659,10 @@ fi
+ if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -2795,7 +2680,7 @@ do
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2818,11 +2703,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+-$as_echo "$CC" >&6; }
++ { echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -2833,10 +2718,10 @@ if test -z "$CC"; then
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_CC+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+@@ -2849,7 +2734,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2860,11 +2745,11 @@ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+-$as_echo "$CC" >&6; }
++ { echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -2877,10 +2762,10 @@ if test -z "$CC"; then
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+@@ -2893,7 +2778,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -2904,11 +2789,11 @@ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-$as_echo "$ac_ct_CC" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -2920,10 +2805,10 @@ done
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -2935,48 +2820,44 @@ fi
+ fi
+
+
+-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
++echo "$as_me: error: no acceptable C compiler found in \$PATH
+ See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Provide some information about the compiler.
+-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+-set X $ac_compile
+-ac_compiler=$2
++echo "$as_me:$LINENO: checking for C compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
+ { (ac_try="$ac_compiler --version >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -v >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -V >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+ cat >conftest.$ac_ext <<_ACEOF
+@@ -2995,22 +2876,27 @@ main ()
+ }
+ _ACEOF
+ ac_clean_files_save=$ac_clean_files
+-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
++ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ # Try to create an executable without -o first, disregard a.out.
+ # It will help us diagnose broken compilers, and finding out an intuition
+ # of exeext.
+-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+-$as_echo_n "checking for C compiler default output file name... " >&6; }
+-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+-
+-# The possible output files:
+-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+-
++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++#
++# List of possible output files, starting from the most likely.
++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
++# only as a last resort. b.out is created by i960 compilers.
++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
++#
++# The IRIX 6 linker writes into existing files which may not be
++# executable, retaining their permissions. Remove them first so a
++# subsequent execution test works.
+ ac_rmfiles=
+ for ac_file in $ac_files
+ do
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+ done
+@@ -3021,11 +2907,10 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+ # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+@@ -3036,7 +2921,7 @@ for ac_file in $ac_files ''
+ do
+ test -f "$ac_file" || continue
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+@@ -3063,15 +2948,15 @@ else
+ ac_file=''
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+-$as_echo "$ac_file" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_file" >&5
++echo "${ECHO_T}$ac_file" >&6; }
+ if test -z "$ac_file"; then
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: C compiler cannot create executables
++echo "$as_me: error: C compiler cannot create executables
+ See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+ fi
+@@ -3080,8 +2965,8 @@ ac_exeext=$ac_cv_exeext
+
+ # Check that the compiler produces executables we can run. If not, either
+ # the compiler is broken, or we cross compile.
+-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+-$as_echo_n "checking whether the C compiler works... " >&6; }
++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+ # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+ # If not cross compiling, check that we can run a simple program.
+ if test "$cross_compiling" != yes; then
+@@ -3090,51 +2975,49 @@ if test "$cross_compiling" != yes; then
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+- { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'.
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot run C compiled programs.
++echo "$as_me: error: cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'.
+ See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++{ echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+
+-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
++rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ ac_clean_files=$ac_clean_files_save
+ # Check that the compiler produces executables we can run. If not, either
+ # the compiler is broken, or we cross compile.
+-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+-$as_echo_n "checking whether we are cross compiling... " >&6; }
+-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+-$as_echo "$cross_compiling" >&6; }
++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
++echo "${ECHO_T}$cross_compiling" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+-$as_echo_n "checking for suffix of executables... " >&6; }
++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+ if { (ac_try="$ac_link"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+ # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+@@ -3143,31 +3026,31 @@ $as_echo "$ac_try_echo") >&5
+ for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+ done
+ else
+- { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+ See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ rm -f conftest$ac_cv_exeext
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+-$as_echo "$ac_cv_exeext" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
++echo "${ECHO_T}$ac_cv_exeext" >&6; }
+
+ rm -f conftest.$ac_ext
+ EXEEXT=$ac_cv_exeext
+ ac_exeext=$EXEEXT
+-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+-$as_echo_n "checking for suffix of object files... " >&6; }
++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+ if test "${ac_cv_objext+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -3190,41 +3073,40 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+ done
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
++echo "$as_me: error: cannot compute suffix of object files: cannot compile
+ See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+-$as_echo "$ac_cv_objext" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
++echo "${ECHO_T}$ac_cv_objext" >&6; }
+ OBJEXT=$ac_cv_objext
+ ac_objext=$OBJEXT
+-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+ if test "${ac_cv_c_compiler_gnu+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -3250,21 +3132,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+@@ -3274,19 +3155,15 @@ rm -f core conftest.err conftest.$ac_obj
+ ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+-if test $ac_compiler_gnu = yes; then
+- GCC=yes
+-else
+- GCC=
+-fi
++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
++GCC=`test $ac_compiler_gnu = yes && echo yes`
+ ac_test_CFLAGS=${CFLAGS+set}
+ ac_save_CFLAGS=$CFLAGS
+-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+-$as_echo_n "checking whether $CC accepts -g... " >&6; }
++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_cc_g+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+@@ -3313,21 +3190,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+@@ -3352,21 +3228,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+@@ -3392,21 +3267,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+@@ -3421,8 +3295,8 @@ fi
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+-$as_echo "$ac_cv_prog_cc_g" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+ elif test $ac_cv_prog_cc_g = yes; then
+@@ -3438,10 +3312,10 @@ else
+ CFLAGS=
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_cc_c89+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_cv_prog_cc_c89=no
+ ac_save_CC=$CC
+@@ -3512,21 +3386,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+@@ -3542,15 +3415,15 @@ fi
+ # AC_CACHE_VAL
+ case "x$ac_cv_prog_cc_c89" in
+ x)
+- { $as_echo "$as_me:$LINENO: result: none needed" >&5
+-$as_echo "none needed" >&6; } ;;
++ { echo "$as_me:$LINENO: result: none needed" >&5
++echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+- { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+-$as_echo "unsupported" >&6; } ;;
++ { echo "$as_me:$LINENO: result: unsupported" >&5
++echo "${ECHO_T}unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+ esac
+
+
+@@ -3571,8 +3444,8 @@ am__doit:
+ .PHONY: am__doit
+ END
+ # If we don't find an include directive, just comment out the code.
+-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+-$as_echo_n "checking for style of include used by $am_make... " >&6; }
++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+ am__include="#"
+ am__quote=
+ _am_result=none
+@@ -3599,8 +3472,8 @@ if test "$am__include" = "#"; then
+ fi
+
+
+-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+-$as_echo "$_am_result" >&6; }
++{ echo "$as_me:$LINENO: result: $_am_result" >&5
++echo "${ECHO_T}$_am_result" >&6; }
+ rm -f confinc confmf
+
+ # Check whether --enable-dependency-tracking was given.
+@@ -3624,10 +3497,10 @@ fi
+
+ depcc="$CC" am_compiler_list=
+
+-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+-$as_echo_n "checking dependency style of $depcc... " >&6; }
++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+ if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+@@ -3715,8 +3588,8 @@ else
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+ CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+@@ -3808,34 +3681,34 @@ fi
+
+ # Make sure we can run config.sub.
+ $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+-$as_echo_n "checking build system type... " >&6; }
++{ echo "$as_me:$LINENO: checking build system type" >&5
++echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+ if test "${ac_cv_build+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_build_alias=$build_alias
+ test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+ test "x$ac_build_alias" = x &&
+- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
++echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+-$as_echo "$ac_cv_build" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
++echo "${ECHO_T}$ac_cv_build" >&6; }
+ case $ac_cv_build in
+ *-*-*) ;;
+-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
++echo "$as_me: error: invalid value of canonical build" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ build=$ac_cv_build
+@@ -3852,27 +3725,27 @@ IFS=$ac_save_IFS
+ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+-$as_echo_n "checking host system type... " >&6; }
++{ echo "$as_me:$LINENO: checking host system type" >&5
++echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+ if test "${ac_cv_host+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+ else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+-$as_echo "$ac_cv_host" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
++echo "${ECHO_T}$ac_cv_host" >&6; }
+ case $ac_cv_host in
+ *-*-*) ;;
+-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
++echo "$as_me: error: invalid value of canonical host" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ host=$ac_cv_host
+@@ -3889,10 +3762,10 @@ IFS=$ac_save_IFS
+ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
+ if test "${lt_cv_path_SED+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # Loop through the user's path and test for sed and gsed.
+ # Then use that list of sed's as ones to test for truncation.
+@@ -3945,40 +3818,45 @@ fi
+
+ SED=$lt_cv_path_SED
+
+-{ $as_echo "$as_me:$LINENO: result: $SED" >&5
+-$as_echo "$SED" >&6; }
++{ echo "$as_me:$LINENO: result: $SED" >&5
++echo "${ECHO_T}$SED" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
++if test "${ac_cv_path_GREP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ # Extract the first word of "grep ggrep" to use in msg output
++if test -z "$GREP"; then
++set dummy grep ggrep; ac_prog_name=$2
+ if test "${ac_cv_path_GREP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- if test -z "$GREP"; then
+ ac_path_GREP_found=false
+- # Loop through the user's path and test for each of PROGNAME-LIST
+- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++# Loop through the user's path and test for each of PROGNAME-LIST
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+-# Check for GNU ac_path_GREP and select it if it is found.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
++ # Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+ case `"$ac_path_GREP" --version 2>&1` in
+ *GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+ *)
+ ac_count=0
+- $as_echo_n 0123456789 >"conftest.in"
++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+- $as_echo 'GREP' >> "conftest.nl"
++ echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+@@ -3993,60 +3871,74 @@ case `"$ac_path_GREP" --version 2>&1` in
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+ esac
+
+- $ac_path_GREP_found && break 3
+- done
++
++ $ac_path_GREP_found && break 3
+ done
+ done
++
++done
+ IFS=$as_save_IFS
+- if test -z "$ac_cv_path_GREP"; then
+- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
++
++
++fi
++
++GREP="$ac_cv_path_GREP"
++if test -z "$GREP"; then
++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+- fi
++fi
++
+ else
+ ac_cv_path_GREP=$GREP
+ fi
+
++
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+-$as_echo "$ac_cv_path_GREP" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
++echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+-$as_echo_n "checking for egrep... " >&6; }
++{ echo "$as_me:$LINENO: checking for egrep" >&5
++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+ if test "${ac_cv_path_EGREP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+- if test -z "$EGREP"; then
++ # Extract the first word of "egrep" to use in msg output
++if test -z "$EGREP"; then
++set dummy egrep; ac_prog_name=$2
++if test "${ac_cv_path_EGREP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
+ ac_path_EGREP_found=false
+- # Loop through the user's path and test for each of PROGNAME-LIST
+- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++# Loop through the user's path and test for each of PROGNAME-LIST
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+-# Check for GNU ac_path_EGREP and select it if it is found.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
++ # Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+ case `"$ac_path_EGREP" --version 2>&1` in
+ *GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+ *)
+ ac_count=0
+- $as_echo_n 0123456789 >"conftest.in"
++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+- $as_echo 'EGREP' >> "conftest.nl"
++ echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+@@ -4061,24 +3953,33 @@ case `"$ac_path_EGREP" --version 2>&1` i
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+ esac
+
+- $ac_path_EGREP_found && break 3
+- done
++
++ $ac_path_EGREP_found && break 3
+ done
+ done
++
++done
+ IFS=$as_save_IFS
+- if test -z "$ac_cv_path_EGREP"; then
+- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
++
++
++fi
++
++EGREP="$ac_cv_path_EGREP"
++if test -z "$EGREP"; then
++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+- fi
++fi
++
+ else
+ ac_cv_path_EGREP=$EGREP
+ fi
+
++
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+-$as_echo "$ac_cv_path_EGREP" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+@@ -4093,8 +3994,8 @@ fi
+ ac_prog=ld
+ if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+-$as_echo_n "checking for ld used by $CC... " >&6; }
++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+@@ -4123,14 +4024,14 @@ $as_echo_n "checking for ld used by $CC.
+ ;;
+ esac
+ elif test "$with_gnu_ld" = yes; then
+- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+-$as_echo_n "checking for GNU ld... " >&6; }
++ { echo "$as_me:$LINENO: checking for GNU ld" >&5
++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+-$as_echo_n "checking for non-GNU ld... " >&6; }
++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
+ fi
+ if test "${lt_cv_path_LD+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+@@ -4160,19 +4061,19 @@ fi
+
+ LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+- { $as_echo "$as_me:$LINENO: result: $LD" >&5
+-$as_echo "$LD" >&6; }
++ { echo "$as_me:$LINENO: result: $LD" >&5
++echo "${ECHO_T}$LD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_gnu_ld+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+ case `$LD -v 2>&1 </dev/null` in
+@@ -4184,20 +4085,20 @@ case `$LD -v 2>&1 </dev/null` in
+ ;;
+ esac
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
+ with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+-$as_echo_n "checking for $LD option to reload object files... " >&6; }
++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
+ if test "${lt_cv_ld_reload_flag+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_ld_reload_flag='-r'
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+-$as_echo "$lt_cv_ld_reload_flag" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
+ reload_flag=$lt_cv_ld_reload_flag
+ case $reload_flag in
+ "" | " "*) ;;
+@@ -4214,10 +4115,10 @@ case $host_os in
+ ;;
+ esac
+
+-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+-$as_echo_n "checking for BSD-compatible nm... " >&6; }
++{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
+ if test "${lt_cv_path_NM+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$NM"; then
+ # Let the user override the test.
+@@ -4263,25 +4164,25 @@ else
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+-$as_echo "$lt_cv_path_NM" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
++echo "${ECHO_T}$lt_cv_path_NM" >&6; }
+ NM="$lt_cv_path_NM"
+
+-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+-$as_echo_n "checking whether ln -s works... " >&6; }
++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
+ LN_S=$as_ln_s
+ if test "$LN_S" = "ln -s"; then
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+-$as_echo "no, using $LN_S" >&6; }
++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
++echo "${ECHO_T}no, using $LN_S" >&6; }
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
+ if test "${lt_cv_deplibs_check_method+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+ lt_cv_file_magic_test_file=
+@@ -4393,7 +4294,7 @@ linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd*)
++netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+@@ -4464,8 +4365,8 @@ sysv5* | sco3.2v5* | sco5v6* | unixware*
+ esac
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+-$as_echo "$lt_cv_deplibs_check_method" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -4499,7 +4400,7 @@ ia64-*-hpux*)
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+@@ -4514,11 +4415,11 @@ ia64-*-hpux*)
+ ;;
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '#line 4517 "configure"' > conftest.$ac_ext
++ echo '#line 4418 "configure"' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+@@ -4556,7 +4457,7 @@ s390*-*linux*|sparc*-*linux*)
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+@@ -4579,7 +4480,6 @@ s390*-*linux*|sparc*-*linux*)
+ esac
+ ;;
+ *64-bit*)
+- libsuff=64
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+@@ -4607,10 +4507,10 @@ s390*-*linux*|sparc*-*linux*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
+ if test "${lt_cv_cc_needs_belf+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+@@ -4639,30 +4539,26 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ lt_cv_cc_needs_belf=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ lt_cv_cc_needs_belf=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+@@ -4672,8 +4568,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+-$as_echo "$lt_cv_cc_needs_belf" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+@@ -4685,7 +4581,7 @@ sparc*-*solaris*)
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+@@ -4707,10 +4603,10 @@ sparc*-*solaris*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+@@ -4723,7 +4619,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -4734,11 +4630,11 @@ fi
+ fi
+ DLLTOOL=$ac_cv_prog_DLLTOOL
+ if test -n "$DLLTOOL"; then
+- { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+-$as_echo "$DLLTOOL" >&6; }
++ { echo "$as_me:$LINENO: result: $DLLTOOL" >&5
++echo "${ECHO_T}$DLLTOOL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -4747,10 +4643,10 @@ if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+ set dummy dlltool; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+@@ -4763,7 +4659,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -4774,11 +4670,11 @@ fi
+ fi
+ ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+ if test -n "$ac_ct_DLLTOOL"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
+-$as_echo "$ac_ct_DLLTOOL" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
++echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+@@ -4786,10 +4682,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -4803,10 +4699,10 @@ fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}as; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_AS+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+@@ -4819,7 +4715,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -4830,11 +4726,11 @@ fi
+ fi
+ AS=$ac_cv_prog_AS
+ if test -n "$AS"; then
+- { $as_echo "$as_me:$LINENO: result: $AS" >&5
+-$as_echo "$AS" >&6; }
++ { echo "$as_me:$LINENO: result: $AS" >&5
++echo "${ECHO_T}$AS" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -4843,10 +4739,10 @@ if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+ set dummy as; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+@@ -4859,7 +4755,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AS="as"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -4870,11 +4766,11 @@ fi
+ fi
+ ac_ct_AS=$ac_cv_prog_ac_ct_AS
+ if test -n "$ac_ct_AS"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+-$as_echo "$ac_ct_AS" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
++echo "${ECHO_T}$ac_ct_AS" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_AS" = x; then
+@@ -4882,10 +4778,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -4899,10 +4795,10 @@ fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}objdump; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+@@ -4915,7 +4811,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -4926,11 +4822,11 @@ fi
+ fi
+ OBJDUMP=$ac_cv_prog_OBJDUMP
+ if test -n "$OBJDUMP"; then
+- { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+-$as_echo "$OBJDUMP" >&6; }
++ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
++echo "${ECHO_T}$OBJDUMP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -4939,10 +4835,10 @@ if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+ set dummy objdump; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+@@ -4955,7 +4851,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -4966,11 +4862,11 @@ fi
+ fi
+ ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+ if test -n "$ac_ct_OBJDUMP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+-$as_echo "$ac_ct_OBJDUMP" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+@@ -4978,10 +4874,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -5004,15 +4900,15 @@ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+-$as_echo_n "checking how to run the C preprocessor... " >&6; }
++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+@@ -5044,21 +4940,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+@@ -5082,14 +4977,13 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+@@ -5097,7 +4991,7 @@ $as_echo "$ac_try_echo") >&5
+ # Broken: success on invalid input.
+ continue
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+@@ -5122,8 +5016,8 @@ fi
+ else
+ ac_cv_prog_CPP=$CPP
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+-$as_echo "$CPP" >&6; }
++{ echo "$as_me:$LINENO: result: $CPP" >&5
++echo "${ECHO_T}$CPP" >&6; }
+ ac_preproc_ok=false
+ for ac_c_preproc_warn_flag in '' yes
+ do
+@@ -5151,21 +5045,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+@@ -5189,14 +5082,13 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+@@ -5204,7 +5096,7 @@ $as_echo "$ac_try_echo") >&5
+ # Broken: success on invalid input.
+ continue
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+@@ -5220,9 +5112,9 @@ rm -f conftest.err conftest.$ac_ext
+ if $ac_preproc_ok; then
+ :
+ else
+- { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+ See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+@@ -5234,10 +5126,10 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+-$as_echo_n "checking for ANSI C header files... " >&6; }
++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+ if test "${ac_cv_header_stdc+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -5264,21 +5156,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_stdc=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_stdc=no
+@@ -5370,40 +5261,37 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+ else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ( exit $ac_status )
+ ac_cv_header_stdc=no
+ fi
+-rm -rf conftest.dSYM
+ rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ fi
+
+
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+-$as_echo "$ac_cv_header_stdc" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
++echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+ if test $ac_cv_header_stdc = yes; then
+
+ cat >>confdefs.h <<\_ACEOF
+@@ -5425,11 +5313,11 @@ fi
+ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+ do
+-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+-$as_echo_n "checking for $ac_header... " >&6; }
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++{ echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+ if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -5447,21 +5335,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ eval "$as_ac_Header=yes"
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_Header=no"
+@@ -5469,14 +5356,12 @@ fi
+
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-ac_res=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+-$as_echo "$ac_res" >&6; }
+-if test `eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'` = yes; then
++ac_res=`eval echo '${'$as_ac_Header'}'`
++ { echo "$as_me:$LINENO: result: $ac_res" >&5
++echo "${ECHO_T}$ac_res" >&6; }
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+ _ACEOF
+
+ fi
+@@ -5487,21 +5372,20 @@ done
+
+ for ac_header in dlfcn.h
+ do
+-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+-$as_echo_n "checking for $ac_header... " >&6; }
++ { echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+ if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ fi
+-ac_res=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+-$as_echo "$ac_res" >&6; }
++ac_res=`eval echo '${'$as_ac_Header'}'`
++ { echo "$as_me:$LINENO: result: $ac_res" >&5
++echo "${ECHO_T}$ac_res" >&6; }
+ else
+ # Is the header compilable?
+-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
+-$as_echo_n "checking $ac_header usability... " >&6; }
++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+@@ -5517,33 +5401,32 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+ fi
+
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+-$as_echo "$ac_header_compiler" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+ # Is the header present?
+-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
+-$as_echo_n "checking $ac_header presence... " >&6; }
++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+@@ -5557,52 +5440,51 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+ fi
+
+ rm -f conftest.err conftest.$ac_ext
+-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+-$as_echo "$ac_header_preproc" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+ # So? What about this header?
+ case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+ ## --------------------------------------------------------------------------------- ##
+ ## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=atk&component=gail ##
+@@ -5611,23 +5493,21 @@ _ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+-$as_echo_n "checking for $ac_header... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+ if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ eval "$as_ac_Header=\$ac_header_preproc"
+ fi
+-ac_res=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+-$as_echo "$ac_res" >&6; }
++ac_res=`eval echo '${'$as_ac_Header'}'`
++ { echo "$as_me:$LINENO: result: $ac_res" >&5
++echo "${ECHO_T}$ac_res" >&6; }
+
+ fi
+-if test `eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'` = yes; then
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+ _ACEOF
+
+ fi
+@@ -5648,10 +5528,10 @@ if test -z "$CXX"; then
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_CXX+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+@@ -5664,7 +5544,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -5675,11 +5555,11 @@ fi
+ fi
+ CXX=$ac_cv_prog_CXX
+ if test -n "$CXX"; then
+- { $as_echo "$as_me:$LINENO: result: $CXX" >&5
+-$as_echo "$CXX" >&6; }
++ { echo "$as_me:$LINENO: result: $CXX" >&5
++echo "${ECHO_T}$CXX" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -5692,10 +5572,10 @@ if test -z "$CXX"; then
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+@@ -5708,7 +5588,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -5719,11 +5599,11 @@ fi
+ fi
+ ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+ if test -n "$ac_ct_CXX"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+-$as_echo "$ac_ct_CXX" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
++echo "${ECHO_T}$ac_ct_CXX" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -5735,10 +5615,10 @@ done
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -5750,47 +5630,43 @@ fi
+ fi
+ fi
+ # Provide some information about the compiler.
+-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
+-set X $ac_compile
+-ac_compiler=$2
++echo "$as_me:$LINENO: checking for C++ compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
+ { (ac_try="$ac_compiler --version >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -v >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -V >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
++{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
+ if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -5816,21 +5692,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+@@ -5840,19 +5715,15 @@ rm -f core conftest.err conftest.$ac_obj
+ ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+-if test $ac_compiler_gnu = yes; then
+- GXX=yes
+-else
+- GXX=
+-fi
++{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
++GXX=`test $ac_compiler_gnu = yes && echo yes`
+ ac_test_CXXFLAGS=${CXXFLAGS+set}
+ ac_save_CXXFLAGS=$CXXFLAGS
+-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
++{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_cxx_g+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+@@ -5879,21 +5750,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cxx_g=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ CXXFLAGS=""
+@@ -5918,21 +5788,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+@@ -5958,21 +5827,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cxx_g=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+@@ -5987,8 +5855,8 @@ fi
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+-$as_echo "$ac_cv_prog_cxx_g" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
+ if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+ elif test $ac_cv_prog_cxx_g = yes; then
+@@ -6012,10 +5880,10 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ depcc="$CXX" am_compiler_list=
+
+-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+-$as_echo_n "checking dependency style of $depcc... " >&6; }
++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+ if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+@@ -6103,8 +5971,8 @@ else
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
++{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
+ CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+@@ -6128,11 +5996,11 @@ ac_cpp='$CXXCPP $CPPFLAGS'
+ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
++{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
+ if test -z "$CXXCPP"; then
+ if test "${ac_cv_prog_CXXCPP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+@@ -6164,21 +6032,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+@@ -6202,14 +6069,13 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+@@ -6217,7 +6083,7 @@ $as_echo "$ac_try_echo") >&5
+ # Broken: success on invalid input.
+ continue
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+@@ -6242,8 +6108,8 @@ fi
+ else
+ ac_cv_prog_CXXCPP=$CXXCPP
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
+-$as_echo "$CXXCPP" >&6; }
++{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
++echo "${ECHO_T}$CXXCPP" >&6; }
+ ac_preproc_ok=false
+ for ac_cxx_preproc_warn_flag in '' yes
+ do
+@@ -6271,21 +6137,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+@@ -6309,14 +6174,13 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+@@ -6324,7 +6188,7 @@ $as_echo "$ac_try_echo") >&5
+ # Broken: success on invalid input.
+ continue
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+@@ -6340,9 +6204,9 @@ rm -f conftest.err conftest.$ac_ext
+ if $ac_preproc_ok; then
+ :
+ else
+- { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
++ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
++echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+ See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+@@ -6365,10 +6229,10 @@ if test -n "$ac_tool_prefix"; then
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_F77+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$F77"; then
+ ac_cv_prog_F77="$F77" # Let the user override the test.
+@@ -6381,7 +6245,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -6392,11 +6256,11 @@ fi
+ fi
+ F77=$ac_cv_prog_F77
+ if test -n "$F77"; then
+- { $as_echo "$as_me:$LINENO: result: $F77" >&5
+-$as_echo "$F77" >&6; }
++ { echo "$as_me:$LINENO: result: $F77" >&5
++echo "${ECHO_T}$F77" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -6409,10 +6273,10 @@ if test -z "$F77"; then
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_F77"; then
+ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+@@ -6425,7 +6289,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_F77="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -6436,11 +6300,11 @@ fi
+ fi
+ ac_ct_F77=$ac_cv_prog_ac_ct_F77
+ if test -n "$ac_ct_F77"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+-$as_echo "$ac_ct_F77" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
++echo "${ECHO_T}$ac_ct_F77" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -6452,10 +6316,10 @@ done
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -6466,41 +6330,37 @@ fi
+
+
+ # Provide some information about the compiler.
+-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
+-set X $ac_compile
+-ac_compiler=$2
++echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
+ { (ac_try="$ac_compiler --version >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -v >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ { (ac_try="$ac_compiler -V >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ rm -f a.out
+
+@@ -6508,10 +6368,10 @@ rm -f a.out
+ # input file. (Note that this only needs to work for GNU compilers.)
+ ac_save_ext=$ac_ext
+ ac_ext=F
+-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
++{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
+ if test "${ac_cv_f77_compiler_gnu+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ program main
+@@ -6527,21 +6387,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_f77_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+@@ -6551,16 +6410,16 @@ rm -f core conftest.err conftest.$ac_obj
+ ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+-$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
+ ac_ext=$ac_save_ext
+ ac_test_FFLAGS=${FFLAGS+set}
+ ac_save_FFLAGS=$FFLAGS
+ FFLAGS=
+-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+-$as_echo_n "checking whether $F77 accepts -g... " >&6; }
++{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_f77_g+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ FFLAGS=-g
+ cat >conftest.$ac_ext <<_ACEOF
+@@ -6574,21 +6433,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_f77_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_f77_g=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_prog_f77_g=no
+@@ -6597,8 +6455,8 @@ fi
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+-$as_echo "$ac_cv_prog_f77_g" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
+ if test "$ac_test_FFLAGS" = set; then
+ FFLAGS=$ac_save_FFLAGS
+ elif test $ac_cv_prog_f77_g = yes; then
+@@ -6615,11 +6473,7 @@ else
+ fi
+ fi
+
+-if test $ac_compiler_gnu = yes; then
+- G77=yes
+-else
+- G77=
+-fi
++G77=`test $ac_compiler_gnu = yes && echo yes`
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+@@ -6630,10 +6484,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+ # find the maximum length of command line arguments
+-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
+ if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ i=0
+ teststring="ABCD"
+@@ -6742,11 +6596,11 @@ else
+ fi
+
+ if test -n $lt_cv_sys_max_cmd_len ; then
+- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: none" >&5
+-$as_echo "none" >&6; }
++ { echo "$as_me:$LINENO: result: none" >&5
++echo "${ECHO_T}none" >&6; }
+ fi
+
+
+@@ -6754,10 +6608,10 @@ fi
+
+
+ # Check for command to grab the raw symbol name followed by C symbol from nm.
+-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
+ if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+
+ # These are sane defaults that work on at least a few old systems.
+@@ -6862,14 +6716,14 @@ EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+@@ -6924,7 +6778,7 @@ EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+@@ -6959,17 +6813,17 @@ if test -z "$lt_cv_sys_global_symbol_pip
+ lt_cv_sys_global_symbol_to_cdecl=
+ fi
+ if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+- { $as_echo "$as_me:$LINENO: result: failed" >&5
+-$as_echo "failed" >&6; }
++ { echo "$as_me:$LINENO: result: failed" >&5
++echo "${ECHO_T}failed" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: ok" >&5
+-$as_echo "ok" >&6; }
++ { echo "$as_me:$LINENO: result: ok" >&5
++echo "${ECHO_T}ok" >&6; }
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
+-$as_echo_n "checking for objdir... " >&6; }
++{ echo "$as_me:$LINENO: checking for objdir" >&5
++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
+ if test "${lt_cv_objdir+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ rm -f .libs 2>/dev/null
+ mkdir .libs 2>/dev/null
+@@ -6981,8 +6835,8 @@ else
+ fi
+ rmdir .libs 2>/dev/null
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+-$as_echo "$lt_cv_objdir" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
++echo "${ECHO_T}$lt_cv_objdir" >&6; }
+ objdir=$lt_cv_objdir
+
+
+@@ -7033,10 +6887,10 @@ with_gnu_ld="$lt_cv_prog_gnu_ld"
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ar; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_AR+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+@@ -7049,7 +6903,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7060,11 +6914,11 @@ fi
+ fi
+ AR=$ac_cv_prog_AR
+ if test -n "$AR"; then
+- { $as_echo "$as_me:$LINENO: result: $AR" >&5
+-$as_echo "$AR" >&6; }
++ { echo "$as_me:$LINENO: result: $AR" >&5
++echo "${ECHO_T}$AR" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -7073,10 +6927,10 @@ if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+ set dummy ar; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+@@ -7089,7 +6943,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7100,11 +6954,11 @@ fi
+ fi
+ ac_ct_AR=$ac_cv_prog_ac_ct_AR
+ if test -n "$ac_ct_AR"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+-$as_echo "$ac_ct_AR" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
++echo "${ECHO_T}$ac_ct_AR" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_AR" = x; then
+@@ -7112,10 +6966,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -7129,10 +6983,10 @@ fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_RANLIB+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+@@ -7145,7 +6999,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7156,11 +7010,11 @@ fi
+ fi
+ RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+-$as_echo "$RANLIB" >&6; }
++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
++echo "${ECHO_T}$RANLIB" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -7169,10 +7023,10 @@ if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+ set dummy ranlib; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+@@ -7185,7 +7039,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7196,11 +7050,11 @@ fi
+ fi
+ ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+ if test -n "$ac_ct_RANLIB"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+-$as_echo "$ac_ct_RANLIB" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+@@ -7208,10 +7062,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -7225,10 +7079,10 @@ fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_STRIP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+@@ -7241,7 +7095,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7252,11 +7106,11 @@ fi
+ fi
+ STRIP=$ac_cv_prog_STRIP
+ if test -n "$STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+-$as_echo "$STRIP" >&6; }
++ { echo "$as_me:$LINENO: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -7265,10 +7119,10 @@ if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+ set dummy strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+@@ -7281,7 +7135,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7292,11 +7146,11 @@ fi
+ fi
+ ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+ if test -n "$ac_ct_STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+-$as_echo "$ac_ct_STRIP" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_STRIP" = x; then
+@@ -7304,10 +7158,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -7372,10 +7226,10 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -
+ case $deplibs_check_method in
+ file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
+ if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $MAGIC_CMD in
+ [\\/*] | ?:[\\/]*)
+@@ -7425,19 +7279,19 @@ fi
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+-$as_echo "$MAGIC_CMD" >&6; }
++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+- { $as_echo "$as_me:$LINENO: checking for file" >&5
+-$as_echo_n "checking for file... " >&6; }
++ { echo "$as_me:$LINENO: checking for file" >&5
++echo $ECHO_N "checking for file... $ECHO_C" >&6; }
+ if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $MAGIC_CMD in
+ [\\/*] | ?:[\\/]*)
+@@ -7487,11 +7341,11 @@ fi
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+-$as_echo "$MAGIC_CMD" >&6; }
++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ else
+@@ -7509,10 +7363,10 @@ esac
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+@@ -7525,7 +7379,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7536,11 +7390,11 @@ fi
+ fi
+ DSYMUTIL=$ac_cv_prog_DSYMUTIL
+ if test -n "$DSYMUTIL"; then
+- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+-$as_echo "$DSYMUTIL" >&6; }
++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
++echo "${ECHO_T}$DSYMUTIL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -7549,10 +7403,10 @@ if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+ set dummy dsymutil; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+@@ -7565,7 +7419,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7576,11 +7430,11 @@ fi
+ fi
+ ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+ if test -n "$ac_ct_DSYMUTIL"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+-$as_echo "$ac_ct_DSYMUTIL" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+@@ -7588,10 +7442,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -7605,10 +7459,10 @@ fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_NMEDIT+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+@@ -7621,7 +7475,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7632,11 +7486,11 @@ fi
+ fi
+ NMEDIT=$ac_cv_prog_NMEDIT
+ if test -n "$NMEDIT"; then
+- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
+-$as_echo "$NMEDIT" >&6; }
++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5
++echo "${ECHO_T}$NMEDIT" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -7645,10 +7499,10 @@ if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+ set dummy nmedit; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+@@ -7661,7 +7515,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -7672,11 +7526,11 @@ fi
+ fi
+ ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+ if test -n "$ac_ct_NMEDIT"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+-$as_echo "$ac_ct_NMEDIT" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+@@ -7684,10 +7538,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -7699,10 +7553,10 @@ else
+ fi
+
+
+- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+-$as_echo_n "checking for -single_module linker flag... " >&6; }
++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
+ if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+@@ -7720,12 +7574,12 @@ else
+ rm conftest.c
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
+ if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+@@ -7752,37 +7606,33 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ lt_cv_ld_exported_symbols_list=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ lt_cv_ld_exported_symbols_list=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[0123])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+@@ -7894,10 +7744,10 @@ if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+@@ -7912,11 +7762,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:7915: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7765: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:7919: \$? = $ac_status" >&5
++ echo "$as_me:7769: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -7929,8 +7779,8 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+ if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+@@ -7944,8 +7794,8 @@ lt_prog_compiler_wl=
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
+
+-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+@@ -8176,18 +8026,18 @@ $as_echo_n "checking for $compiler optio
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+-$as_echo "$lt_prog_compiler_pic" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
+
+ #
+ # Check to make sure the PIC flag actually works.
+ #
+ if test -n "$lt_prog_compiler_pic"; then
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+@@ -8202,11 +8052,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:8205: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:8055: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:8209: \$? = $ac_status" >&5
++ echo "$as_me:8059: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -8219,8 +8069,8 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
+
+ if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+@@ -8247,10 +8097,10 @@ esac
+ # Check to make sure the static flag actually works.
+ #
+ wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+@@ -8275,8 +8125,8 @@ else
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
+
+ if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+@@ -8285,10 +8135,10 @@ else
+ fi
+
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_c_o=no
+ $rm -r conftest 2>/dev/null
+@@ -8306,11 +8156,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:8309: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:8159: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:8313: \$? = $ac_status" >&5
++ echo "$as_me:8163: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -8332,34 +8182,34 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
+
+
+ hard_links="nottested"
+ if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+-$as_echo_n "checking if we can lock with hard links... " >&6; }
++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+-$as_echo "$hard_links" >&6; }
++ { echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6; }
+ if test "$hard_links" = no; then
+- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+ else
+ need_locks=no
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+@@ -8571,12 +8421,13 @@ EOF
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
++ link_all_deplibs=no
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -8789,21 +8640,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -8818,13 +8666,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -8859,21 +8706,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -8888,13 +8732,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -9127,7 +8970,7 @@ if test -z "$aix_libpath"; then aix_libp
+ link_all_deplibs=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -9346,8 +9189,8 @@ if test -z "$aix_libpath"; then aix_libp
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+-$as_echo "$ld_shlibs" >&6; }
++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
++echo "${ECHO_T}$ld_shlibs" >&6; }
+ test "$ld_shlibs" = no && can_build_shared=no
+
+ #
+@@ -9367,15 +9210,15 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
+ $rm conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+@@ -9393,7 +9236,7 @@ $as_echo_n "checking whether -lc should
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc=no
+@@ -9405,16 +9248,16 @@ $as_echo_n "checking whether -lc should
+ cat conftest.err 1>&5
+ fi
+ $rm conftest*
+- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+-$as_echo "$archive_cmds_need_lc" >&6; }
++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
++echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
+ ;;
+ esac
+ fi
+ ;;
+ esac
+
+-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+-$as_echo_n "checking dynamic linker characteristics... " >&6; }
++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+@@ -9822,13 +9665,11 @@ linux* | k*bsd*-gnu)
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -9840,6 +9681,18 @@ linux* | k*bsd*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -10017,19 +9870,19 @@ uts4*)
+ dynamic_linker=no
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+-$as_echo "$dynamic_linker" >&6; }
++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6; }
+ test "$dynamic_linker" = no && can_build_shared=no
+
+ if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+ fi
+
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+ if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+ fi
+@@ -10041,8 +9894,8 @@ if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+ hardcode_action=
+ if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var" || \
+@@ -10066,8 +9919,8 @@ else
+ # directories.
+ hardcode_action=unsupported
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+-$as_echo "$hardcode_action" >&6; }
++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
++echo "${ECHO_T}$hardcode_action" >&6; }
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+@@ -10080,13 +9933,13 @@ fi
+
+ striplib=
+ old_striplib=
+-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
+ if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ else
+ # FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+@@ -10094,16 +9947,16 @@ else
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+ ;;
+ *)
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ ;;
+ esac
+ fi
+@@ -10135,10 +9988,10 @@ else
+
+ darwin*)
+ # if libdl is installed we need to link against it
+- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+-$as_echo_n "checking for dlopen in -ldl... " >&6; }
++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
+ if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldl $LIBS"
+@@ -10170,36 +10023,32 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_dl_dlopen=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_dl_dlopen=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
+ if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ else
+@@ -10213,10 +10062,10 @@ fi
+ ;;
+
+ *)
+- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
+-$as_echo_n "checking for shl_load... " >&6; }
++ { echo "$as_me:$LINENO: checking for shl_load" >&5
++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
+ if test "${ac_cv_func_shl_load+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -10269,42 +10118,38 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_func_shl_load=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_func_shl_load=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+-$as_echo "$ac_cv_func_shl_load" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
+ if test $ac_cv_func_shl_load = yes; then
+ lt_cv_dlopen="shl_load"
+ else
+- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+-$as_echo_n "checking for shl_load in -ldld... " >&6; }
++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
+ if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldld $LIBS"
+@@ -10336,43 +10181,39 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_dld_shl_load=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_dld_shl_load=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
+ if test $ac_cv_lib_dld_shl_load = yes; then
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ else
+- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
+-$as_echo_n "checking for dlopen... " >&6; }
++ { echo "$as_me:$LINENO: checking for dlopen" >&5
++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
+ if test "${ac_cv_func_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+@@ -10425,42 +10266,38 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_func_dlopen=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_func_dlopen=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+-$as_echo "$ac_cv_func_dlopen" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
+ if test $ac_cv_func_dlopen = yes; then
+ lt_cv_dlopen="dlopen"
+ else
+- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+-$as_echo_n "checking for dlopen in -ldl... " >&6; }
++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
+ if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldl $LIBS"
+@@ -10492,43 +10329,39 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_dl_dlopen=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_dl_dlopen=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
+ if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ else
+- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
+ if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lsvld $LIBS"
+@@ -10560,43 +10393,39 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_svld_dlopen=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_svld_dlopen=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
+ if test $ac_cv_lib_svld_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ else
+- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+-$as_echo_n "checking for dld_link in -ldld... " >&6; }
++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
+ if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldld $LIBS"
+@@ -10628,36 +10457,32 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_dld_dld_link=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_dld_dld_link=no
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
+ if test $ac_cv_lib_dld_dld_link = yes; then
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ fi
+@@ -10697,10 +10522,10 @@ fi
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
+ if test "${lt_cv_dlopen_self+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+@@ -10708,7 +10533,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 10711 "configure"
++#line 10536 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -10774,7 +10599,7 @@ EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+@@ -10792,15 +10617,15 @@ rm -fr conftest*
+
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+-$as_echo "$lt_cv_dlopen_self" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
+ if test "${lt_cv_dlopen_self_static+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+@@ -10808,7 +10633,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 10811 "configure"
++#line 10636 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -10874,7 +10699,7 @@ EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+@@ -10892,8 +10717,8 @@ rm -fr conftest*
+
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+-$as_echo "$lt_cv_dlopen_self_static" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+@@ -10915,13 +10740,13 @@ fi
+
+
+ # Report which library types will actually be built
+-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+-$as_echo "$can_build_shared" >&6; }
++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
++echo "${ECHO_T}$can_build_shared" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+-$as_echo_n "checking whether to build shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+@@ -10941,15 +10766,15 @@ aix[4-9]*)
+ fi
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+-$as_echo "$enable_shared" >&6; }
++{ echo "$as_me:$LINENO: result: $enable_shared" >&5
++echo "${ECHO_T}$enable_shared" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+-$as_echo_n "checking whether to build static libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+-$as_echo "$enable_static" >&6; }
++{ echo "$as_me:$LINENO: result: $enable_static" >&5
++echo "${ECHO_T}$enable_static" >&6; }
+
+ # The else clause should only fire when bootstrapping the
+ # libtool distribution, otherwise you forgot to ship ltmain.sh
+@@ -11042,8 +10867,8 @@ if test -f "$ltmain"; then
+ cfgfile="${ofile}T"
+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+ $rm -f "$cfgfile"
+- { $as_echo "$as_me:$LINENO: creating $ofile" >&5
+-$as_echo "$as_me: creating $ofile" >&6;}
++ { echo "$as_me:$LINENO: creating $ofile" >&5
++echo "$as_me: creating $ofile" >&6;}
+
+ cat <<__EOF__ >> "$cfgfile"
+ #! $SHELL
+@@ -11455,18 +11280,18 @@ fi
+
+ if test -f "$ltmain" && test -n "$tagnames"; then
+ if test ! -f "${ofile}"; then
+- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
+-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
++echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
+ fi
+
+ if test -z "$LTCC"; then
+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+ if test -z "$LTCC"; then
+- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
+-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
++echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
+ else
+- { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
+-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
++ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
++echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
+ fi
+ fi
+ if test -z "$LTCFLAGS"; then
+@@ -11483,16 +11308,16 @@ $as_echo "$as_me: WARNING: using \`LTCC=
+ # Check whether tagname contains only valid characters
+ case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
+ "") ;;
+- *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
+-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;}
++ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
++echo "$as_me: error: invalid tag name: $tagname" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ esac
+
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+ then
+- { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
+-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
++ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
++echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -11635,8 +11460,8 @@ fi
+ ac_prog=ld
+ if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+-$as_echo_n "checking for ld used by $CC... " >&6; }
++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+@@ -11665,14 +11490,14 @@ $as_echo_n "checking for ld used by $CC.
+ ;;
+ esac
+ elif test "$with_gnu_ld" = yes; then
+- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+-$as_echo_n "checking for GNU ld... " >&6; }
++ { echo "$as_me:$LINENO: checking for GNU ld" >&5
++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+-$as_echo_n "checking for non-GNU ld... " >&6; }
++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
+ fi
+ if test "${lt_cv_path_LD+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+@@ -11702,19 +11527,19 @@ fi
+
+ LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+- { $as_echo "$as_me:$LINENO: result: $LD" >&5
+-$as_echo "$LD" >&6; }
++ { echo "$as_me:$LINENO: result: $LD" >&5
++echo "${ECHO_T}$LD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_gnu_ld+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+ case `$LD -v 2>&1 </dev/null` in
+@@ -11726,8 +11551,8 @@ case `$LD -v 2>&1 </dev/null` in
+ ;;
+ esac
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
+ with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+@@ -11777,8 +11602,8 @@ else
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+@@ -11895,21 +11720,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -11924,13 +11746,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -11966,21 +11787,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -11995,13 +11813,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -12404,7 +12221,7 @@ if test -z "$aix_libpath"; then aix_libp
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+@@ -12731,8 +12548,8 @@ if test -z "$aix_libpath"; then aix_libp
+ ld_shlibs_CXX=no
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+-$as_echo "$ld_shlibs_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
++echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+ GCC_CXX="$GXX"
+@@ -12751,7 +12568,7 @@ EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+@@ -12907,8 +12724,8 @@ lt_prog_compiler_wl_CXX=
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX=
+
+-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
+
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+@@ -13108,7 +12925,7 @@ $as_echo_n "checking for $compiler optio
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+@@ -13191,18 +13008,18 @@ $as_echo_n "checking for $compiler optio
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
+-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
+
+ #
+ # Check to make sure the PIC flag actually works.
+ #
+ if test -n "$lt_prog_compiler_pic_CXX"; then
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+@@ -13217,11 +13034,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:13220: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:13037: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:13224: \$? = $ac_status" >&5
++ echo "$as_me:13041: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -13234,8 +13051,8 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+ if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+ case $lt_prog_compiler_pic_CXX in
+@@ -13262,10 +13079,10 @@ esac
+ # Check to make sure the static flag actually works.
+ #
+ wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_static_works_CXX=no
+ save_LDFLAGS="$LDFLAGS"
+@@ -13290,8 +13107,8 @@ else
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+ if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+ :
+@@ -13300,10 +13117,10 @@ else
+ fi
+
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $rm -r conftest 2>/dev/null
+@@ -13321,11 +13138,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:13324: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:13141: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:13328: \$? = $ac_status" >&5
++ echo "$as_me:13145: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -13347,34 +13164,34 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+ hard_links="nottested"
+ if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+-$as_echo_n "checking if we can lock with hard links... " >&6; }
++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+-$as_echo "$hard_links" >&6; }
++ { echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6; }
+ if test "$hard_links" = no; then
+- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+ else
+ need_locks=no
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+@@ -13393,14 +13210,17 @@ $as_echo_n "checking whether the $compil
+ cygwin* | mingw*)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ ;;
++ linux* | k*bsd*-gnu)
++ link_all_deplibs_CXX=no
++ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+
+-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+-$as_echo "$ld_shlibs_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
++echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+ #
+@@ -13420,15 +13240,15 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
+ $rm conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+@@ -13446,7 +13266,7 @@ $as_echo_n "checking whether -lc should
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc_CXX=no
+@@ -13458,16 +13278,16 @@ $as_echo_n "checking whether -lc should
+ cat conftest.err 1>&5
+ fi
+ $rm conftest*
+- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
+-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
+ ;;
+ esac
+ fi
+ ;;
+ esac
+
+-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+-$as_echo_n "checking dynamic linker characteristics... " >&6; }
++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+@@ -13823,13 +13643,11 @@ linux* | k*bsd*-gnu)
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -13841,6 +13659,18 @@ linux* | k*bsd*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -14018,19 +13848,19 @@ uts4*)
+ dynamic_linker=no
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+-$as_echo "$dynamic_linker" >&6; }
++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6; }
+ test "$dynamic_linker" = no && can_build_shared=no
+
+ if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+ fi
+
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+ if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+ fi
+@@ -14042,8 +13872,8 @@ if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+ hardcode_action_CXX=
+ if test -n "$hardcode_libdir_flag_spec_CXX" || \
+ test -n "$runpath_var_CXX" || \
+@@ -14067,8 +13897,8 @@ else
+ # directories.
+ hardcode_action_CXX=unsupported
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+-$as_echo "$hardcode_action_CXX" >&6; }
++{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
++echo "${ECHO_T}$hardcode_action_CXX" >&6; }
+
+ if test "$hardcode_action_CXX" = relink; then
+ # Fast installation is not supported
+@@ -14606,13 +14436,13 @@ done
+ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+-$as_echo "$can_build_shared" >&6; }
++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
++echo "${ECHO_T}$can_build_shared" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+-$as_echo_n "checking whether to build shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+@@ -14631,15 +14461,15 @@ aix[4-9]*)
+ fi
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+-$as_echo "$enable_shared" >&6; }
++{ echo "$as_me:$LINENO: result: $enable_shared" >&5
++echo "${ECHO_T}$enable_shared" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+-$as_echo_n "checking whether to build static libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+-$as_echo "$enable_static" >&6; }
++{ echo "$as_me:$LINENO: result: $enable_static" >&5
++echo "${ECHO_T}$enable_static" >&6; }
+
+ GCC_F77="$G77"
+ LD_F77="$LD"
+@@ -14648,8 +14478,8 @@ lt_prog_compiler_wl_F77=
+ lt_prog_compiler_pic_F77=
+ lt_prog_compiler_static_F77=
+
+-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl_F77='-Wl,'
+@@ -14880,18 +14710,18 @@ $as_echo_n "checking for $compiler optio
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
+-$as_echo "$lt_prog_compiler_pic_F77" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
+
+ #
+ # Check to make sure the PIC flag actually works.
+ #
+ if test -n "$lt_prog_compiler_pic_F77"; then
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_pic_works_F77=no
+ ac_outfile=conftest.$ac_objext
+@@ -14906,11 +14736,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:14909: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14739: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:14913: \$? = $ac_status" >&5
++ echo "$as_me:14743: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -14923,8 +14753,8 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
+-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; }
+
+ if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
+ case $lt_prog_compiler_pic_F77 in
+@@ -14951,10 +14781,10 @@ esac
+ # Check to make sure the static flag actually works.
+ #
+ wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_static_works_F77=no
+ save_LDFLAGS="$LDFLAGS"
+@@ -14979,8 +14809,8 @@ else
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
+-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; }
+
+ if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
+ :
+@@ -14989,10 +14819,10 @@ else
+ fi
+
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_c_o_F77=no
+ $rm -r conftest 2>/dev/null
+@@ -15010,11 +14840,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:15013: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14843: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:15017: \$? = $ac_status" >&5
++ echo "$as_me:14847: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -15036,34 +14866,34 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
+-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
+
+
+ hard_links="nottested"
+ if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+-$as_echo_n "checking if we can lock with hard links... " >&6; }
++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+-$as_echo "$hard_links" >&6; }
++ { echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6; }
+ if test "$hard_links" = no; then
+- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+ else
+ need_locks=no
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+
+ runpath_var=
+ allow_undefined_flag_F77=
+@@ -15275,12 +15105,13 @@ EOF
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
++ link_all_deplibs_F77=no
+ else
+ ld_shlibs_F77=no
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -15483,21 +15314,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_f77_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -15512,13 +15340,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -15543,21 +15370,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_f77_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -15572,13 +15396,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -15811,7 +15634,7 @@ if test -z "$aix_libpath"; then aix_libp
+ link_all_deplibs_F77=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -16030,8 +15853,8 @@ if test -z "$aix_libpath"; then aix_libp
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
+-$as_echo "$ld_shlibs_F77" >&6; }
++{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
++echo "${ECHO_T}$ld_shlibs_F77" >&6; }
+ test "$ld_shlibs_F77" = no && can_build_shared=no
+
+ #
+@@ -16051,15 +15874,15 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
+ $rm conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+@@ -16077,7 +15900,7 @@ $as_echo_n "checking whether -lc should
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc_F77=no
+@@ -16089,16 +15912,16 @@ $as_echo_n "checking whether -lc should
+ cat conftest.err 1>&5
+ fi
+ $rm conftest*
+- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
+-$as_echo "$archive_cmds_need_lc_F77" >&6; }
++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
+ ;;
+ esac
+ fi
+ ;;
+ esac
+
+-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+-$as_echo_n "checking dynamic linker characteristics... " >&6; }
++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+@@ -16454,13 +16277,11 @@ linux* | k*bsd*-gnu)
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -16472,6 +16293,18 @@ linux* | k*bsd*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -16649,19 +16482,19 @@ uts4*)
+ dynamic_linker=no
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+-$as_echo "$dynamic_linker" >&6; }
++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6; }
+ test "$dynamic_linker" = no && can_build_shared=no
+
+ if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+ fi
+
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+ if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+ fi
+@@ -16673,8 +16506,8 @@ if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+ hardcode_action_F77=
+ if test -n "$hardcode_libdir_flag_spec_F77" || \
+ test -n "$runpath_var_F77" || \
+@@ -16698,8 +16531,8 @@ else
+ # directories.
+ hardcode_action_F77=unsupported
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+-$as_echo "$hardcode_action_F77" >&6; }
++{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
++echo "${ECHO_T}$hardcode_action_F77" >&6; }
+
+ if test "$hardcode_action_F77" = relink; then
+ # Fast installation is not supported
+@@ -17209,10 +17042,10 @@ if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
+
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+@@ -17227,11 +17060,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:17230: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:17063: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:17234: \$? = $ac_status" >&5
++ echo "$as_me:17067: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -17244,8 +17077,8 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+ if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+@@ -17259,8 +17092,8 @@ lt_prog_compiler_wl_GCJ=
+ lt_prog_compiler_pic_GCJ=
+ lt_prog_compiler_static_GCJ=
+
+-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl_GCJ='-Wl,'
+@@ -17491,18 +17324,18 @@ $as_echo_n "checking for $compiler optio
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
+-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
+
+ #
+ # Check to make sure the PIC flag actually works.
+ #
+ if test -n "$lt_prog_compiler_pic_GCJ"; then
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_pic_works_GCJ=no
+ ac_outfile=conftest.$ac_objext
+@@ -17517,11 +17350,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:17520: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:17353: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:17524: \$? = $ac_status" >&5
++ echo "$as_me:17357: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -17534,8 +17367,8 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
+-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
+
+ if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
+ case $lt_prog_compiler_pic_GCJ in
+@@ -17562,10 +17395,10 @@ esac
+ # Check to make sure the static flag actually works.
+ #
+ wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_static_works_GCJ=no
+ save_LDFLAGS="$LDFLAGS"
+@@ -17590,8 +17423,8 @@ else
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
+-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; }
+
+ if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
+ :
+@@ -17600,10 +17433,10 @@ else
+ fi
+
+
+-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+ if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_compiler_c_o_GCJ=no
+ $rm -r conftest 2>/dev/null
+@@ -17621,11 +17454,11 @@ else
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:17624: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:17457: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:17628: \$? = $ac_status" >&5
++ echo "$as_me:17461: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -17647,34 +17480,34 @@ else
+ $rm conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
+
+
+ hard_links="nottested"
+ if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+-$as_echo_n "checking if we can lock with hard links... " >&6; }
++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+-$as_echo "$hard_links" >&6; }
++ { echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6; }
+ if test "$hard_links" = no; then
+- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+ else
+ need_locks=no
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+
+ runpath_var=
+ allow_undefined_flag_GCJ=
+@@ -17886,12 +17719,13 @@ EOF
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
++ link_all_deplibs_GCJ=no
+ else
+ ld_shlibs_GCJ=no
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -18104,21 +17938,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -18133,13 +17964,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -18174,21 +18004,18 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++ } && test -s conftest$ac_exeext &&
++ $as_test_x conftest$ac_exeext; then
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -18203,13 +18030,12 @@ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ fi
+
+-rm -rf conftest.dSYM
+ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -18442,7 +18268,7 @@ if test -z "$aix_libpath"; then aix_libp
+ link_all_deplibs_GCJ=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -18661,8 +18487,8 @@ if test -z "$aix_libpath"; then aix_libp
+ esac
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
+-$as_echo "$ld_shlibs_GCJ" >&6; }
++{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
++echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
+ test "$ld_shlibs_GCJ" = no && can_build_shared=no
+
+ #
+@@ -18682,15 +18508,15 @@ x|xyes)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
+ $rm conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+@@ -18708,7 +18534,7 @@ $as_echo_n "checking whether -lc should
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc_GCJ=no
+@@ -18720,16 +18546,16 @@ $as_echo_n "checking whether -lc should
+ cat conftest.err 1>&5
+ fi
+ $rm conftest*
+- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
+-$as_echo "$archive_cmds_need_lc_GCJ" >&6; }
++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
+ ;;
+ esac
+ fi
+ ;;
+ esac
+
+-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+-$as_echo_n "checking dynamic linker characteristics... " >&6; }
++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+@@ -19085,13 +18911,11 @@ linux* | k*bsd*-gnu)
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -19103,6 +18927,18 @@ linux* | k*bsd*-gnu)
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -19280,19 +19116,19 @@ uts4*)
+ dynamic_linker=no
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+-$as_echo "$dynamic_linker" >&6; }
++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6; }
+ test "$dynamic_linker" = no && can_build_shared=no
+
+ if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+ fi
+
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+ if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+ fi
+@@ -19304,8 +19140,8 @@ if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+ hardcode_action_GCJ=
+ if test -n "$hardcode_libdir_flag_spec_GCJ" || \
+ test -n "$runpath_var_GCJ" || \
+@@ -19329,8 +19165,8 @@ else
+ # directories.
+ hardcode_action_GCJ=unsupported
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+-$as_echo "$hardcode_action_GCJ" >&6; }
++{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
++echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
+
+ if test "$hardcode_action_GCJ" = relink; then
+ # Fast installation is not supported
+@@ -20253,8 +20089,8 @@ CC="$lt_save_CC"
+ ;;
+
+ *)
+- { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
+-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
++ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
++echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ esac
+@@ -20273,8 +20109,8 @@ $as_echo "$as_me: error: Unsupported tag
+ chmod +x "$ofile"
+ else
+ rm -f "${ofile}T"
+- { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
+-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
++ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
++echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+@@ -20309,8 +20145,8 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtoo
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking for Win32" >&5
+-$as_echo_n "checking for Win32... " >&6; }
++{ echo "$as_me:$LINENO: checking for Win32" >&5
++echo $ECHO_N "checking for Win32... $ECHO_C" >&6; }
+ case "$host" in
+ *-*-mingw*)
+ gail_native_win32=yes
+@@ -20319,8 +20155,8 @@ case "$host" in
+ gail_native_win32=no
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $gail_native_win32" >&5
+-$as_echo "$gail_native_win32" >&6; }
++{ echo "$as_me:$LINENO: result: $gail_native_win32" >&5
++echo "${ECHO_T}$gail_native_win32" >&6; }
+ if test "$gail_native_win32" = "yes"; then
+ OS_WIN32_TRUE=
+ OS_WIN32_FALSE='#'
+@@ -20333,10 +20169,10 @@ fi
+ if test "$gail_native_win32" = "yes"; then
+ # Extract the first word of "lib.exe", so it can be a program name with args.
+ set dummy lib.exe; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_ms_librarian+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$ms_librarian"; then
+ ac_cv_prog_ms_librarian="$ms_librarian" # Let the user override the test.
+@@ -20349,7 +20185,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ms_librarian="yes"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -20361,11 +20197,11 @@ fi
+ fi
+ ms_librarian=$ac_cv_prog_ms_librarian
+ if test -n "$ms_librarian"; then
+- { $as_echo "$as_me:$LINENO: result: $ms_librarian" >&5
+-$as_echo "$ms_librarian" >&6; }
++ { echo "$as_me:$LINENO: result: $ms_librarian" >&5
++echo "${ECHO_T}$ms_librarian" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -20440,8 +20276,8 @@ fi
+ for option in -Wno-sign-compare; do
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $option"
+- { $as_echo "$as_me:$LINENO: checking whether gcc understands $option" >&5
+-$as_echo_n "checking whether gcc understands $option... " >&6; }
++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5
++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; }
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+@@ -20463,21 +20299,20 @@ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ has_option=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+ has_option=no
+@@ -20485,8 +20320,8 @@ fi
+
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$SAVE_CFLAGS"
+- { $as_echo "$as_me:$LINENO: result: $has_option" >&5
+-$as_echo "$has_option" >&6; }
++ { echo "$as_me:$LINENO: result: $has_option" >&5
++echo "${ECHO_T}$has_option" >&6; }
+ if test $has_option = yes; then
+ warning_flags="$warning_flags $option"
+ fi
+@@ -20499,16 +20334,16 @@ $as_echo "$has_option" >&6; }
+ fi
+ ;;
+ *)
+- { { $as_echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5
+-$as_echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;}
++ { { echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5
++echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ esac
+ CFLAGS="$realsave_CFLAGS"
+- { $as_echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5
+-$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; }
+- { $as_echo "$as_me:$LINENO: result: $warning_flags" >&5
+-$as_echo "$warning_flags" >&6; }
++ { echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5
++echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6; }
++ { echo "$as_me:$LINENO: result: $warning_flags" >&5
++echo "${ECHO_T}$warning_flags" >&6; }
+
+ # Check whether --enable-iso-c was given.
+ if test "${enable_iso_c+set}" = set; then
+@@ -20518,8 +20353,8 @@ else
+ fi
+
+
+- { $as_echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5
+-$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; }
++ { echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5
++echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6; }
+ complCFLAGS=
+ if test "x$enable_iso_c" != "xno"; then
+ if test "x$GCC" = "xyes"; then
+@@ -20533,8 +20368,8 @@ $as_echo_n "checking what language compl
+ esac
+ fi
+ fi
+- { $as_echo "$as_me:$LINENO: result: $complCFLAGS" >&5
+-$as_echo "$complCFLAGS" >&6; }
++ { echo "$as_me:$LINENO: result: $complCFLAGS" >&5
++echo "${ECHO_T}$complCFLAGS" >&6; }
+
+ WARN_CFLAGS="$warning_flags $complCFLAGS"
+
+@@ -20549,17 +20384,17 @@ fi
+
+ # FIXME: is this still needed?
+ # Cache $ACLOCAL_FLAGS
+-{ $as_echo "$as_me:$LINENO: checking for aclocal flags" >&5
+-$as_echo_n "checking for aclocal flags... " >&6; }
++{ echo "$as_me:$LINENO: checking for aclocal flags" >&5
++echo $ECHO_N "checking for aclocal flags... $ECHO_C" >&6; }
+ if test "${ac_cv_atk_aclocal_flags+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+
+ ac_cv_atk_aclocal_flags="$ACLOCAL_FLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_atk_aclocal_flags" >&5
+-$as_echo "$ac_cv_atk_aclocal_flags" >&6; }
++{ echo "$as_me:$LINENO: result: $ac_cv_atk_aclocal_flags" >&5
++echo "${ECHO_T}$ac_cv_atk_aclocal_flags" >&6; }
+ ACLOCAL="$ACLOCAL $ac_cv_atk_aclocal_flags"
+
+ ATK_PACKAGES="atk"
+@@ -20585,10 +20420,10 @@ if test "x$ac_cv_env_PKG_CONFIG_set" !=
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+@@ -20603,7 +20438,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -20615,11 +20450,11 @@ esac
+ fi
+ PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+ if test -n "$PKG_CONFIG"; then
+- { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+-$as_echo "$PKG_CONFIG" >&6; }
++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
++echo "${ECHO_T}$PKG_CONFIG" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+
+@@ -20628,10 +20463,10 @@ if test -z "$ac_cv_path_PKG_CONFIG"; the
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+ set dummy pkg-config; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+ if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
+- $as_echo_n "(cached) " >&6
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+@@ -20646,7 +20481,7 @@ do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+@@ -20658,11 +20493,11 @@ esac
+ fi
+ ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+ if test -n "$ac_pt_PKG_CONFIG"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ fi
+
+ if test "x$ac_pt_PKG_CONFIG" = x; then
+@@ -20670,10 +20505,10 @@ fi
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&5
+-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+ whose name does not start with the host triplet. If you think this
+ configuration is useful to you, please write to autoconf at gnu.org." >&2;}
+ ac_tool_warned=yes ;;
+@@ -20687,28 +20522,29 @@ fi
+ fi
+ if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=0.9.0
+- { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
+ PKG_CONFIG=""
+ fi
+
+ fi
+
+ pkg_failed=no
+-{ $as_echo "$as_me:$LINENO: checking for DEPS" >&5
+-$as_echo_n "checking for DEPS... " >&6; }
++{ echo "$as_me:$LINENO: checking for DEPS" >&5
++echo $ECHO_N "checking for DEPS... $ECHO_C" >&6; }
+
+-if test -n "$DEPS_CFLAGS"; then
+- pkg_cv_DEPS_CFLAGS="$DEPS_CFLAGS"
+- elif test -n "$PKG_CONFIG"; then
+- if test -n "$PKG_CONFIG" && \
+- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
++if test -n "$PKG_CONFIG"; then
++ if test -n "$DEPS_CFLAGS"; then
++ pkg_cv_DEPS_CFLAGS="$DEPS_CFLAGS"
++ else
++ if test -n "$PKG_CONFIG" && \
++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
+ \$ATK_PACKAGES >= \$ATK_REQUIRED_VERSION
+ \$GTK_PACKAGES >= \$GTK_REQUIRED_VERSION
+ \$LIBBONOBO_PACKAGES >= \$LIBBONOBO_REQUIRED_VERSION
+@@ -20725,7 +20561,7 @@ if test -n "$DEPS_CFLAGS"; then
+ $AT_SPI_PACKAGES >= $AT_SPI_REQUIRED_VERSION
+ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ pkg_cv_DEPS_CFLAGS=`$PKG_CONFIG --cflags "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+@@ -20738,14 +20574,16 @@ if test -n "$DEPS_CFLAGS"; then
+ else
+ pkg_failed=yes
+ fi
+- else
+- pkg_failed=untried
++ fi
++else
++ pkg_failed=untried
+ fi
+-if test -n "$DEPS_LIBS"; then
+- pkg_cv_DEPS_LIBS="$DEPS_LIBS"
+- elif test -n "$PKG_CONFIG"; then
+- if test -n "$PKG_CONFIG" && \
+- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
++if test -n "$PKG_CONFIG"; then
++ if test -n "$DEPS_LIBS"; then
++ pkg_cv_DEPS_LIBS="$DEPS_LIBS"
++ else
++ if test -n "$PKG_CONFIG" && \
++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
+ \$ATK_PACKAGES >= \$ATK_REQUIRED_VERSION
+ \$GTK_PACKAGES >= \$GTK_REQUIRED_VERSION
+ \$LIBBONOBO_PACKAGES >= \$LIBBONOBO_REQUIRED_VERSION
+@@ -20762,7 +20600,7 @@ if test -n "$DEPS_LIBS"; then
+ $AT_SPI_PACKAGES >= $AT_SPI_REQUIRED_VERSION
+ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ pkg_cv_DEPS_LIBS=`$PKG_CONFIG --libs "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+@@ -20775,8 +20613,9 @@ if test -n "$DEPS_LIBS"; then
+ else
+ pkg_failed=yes
+ fi
+- else
+- pkg_failed=untried
++ fi
++else
++ pkg_failed=untried
+ fi
+
+
+@@ -20789,28 +20628,28 @@ else
+ _pkg_short_errors_supported=no
+ fi
+ if test $_pkg_short_errors_supported = yes; then
+- DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "
++ DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+ $LIBBONOBOUI_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+ $LIBGNOMEUI_PACKAGES >= $LIBGNOMEUI_REQUIRED_VERSION
+ $AT_SPI_PACKAGES >= $AT_SPI_REQUIRED_VERSION
+- $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION" 2>&1`
++ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION"`
+ else
+- DEPS_PKG_ERRORS=`$PKG_CONFIG --print-errors "
++ DEPS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+ $LIBBONOBOUI_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+ $LIBGNOMEUI_PACKAGES >= $LIBGNOMEUI_REQUIRED_VERSION
+ $AT_SPI_PACKAGES >= $AT_SPI_REQUIRED_VERSION
+- $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION" 2>&1`
++ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION"`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$DEPS_PKG_ERRORS" >&5
+
+- { { $as_echo "$as_me:$LINENO: error: Package requirements (
++ { { echo "$as_me:$LINENO: error: Package requirements (
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+@@ -20828,7 +20667,7 @@ Alternatively, you may set the environme
+ and DEPS_LIBS to avoid the need to call pkg-config.
+ See the pkg-config man page for more details.
+ " >&5
+-$as_echo "$as_me: error: Package requirements (
++echo "$as_me: error: Package requirements (
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+@@ -20848,7 +20687,7 @@ See the pkg-config man page for more det
+ " >&2;}
+ { (exit 1); exit 1; }; }
+ elif test $pkg_failed = untried; then
+- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it
++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+@@ -20858,7 +20697,7 @@ See the pkg-config man page for more det
+
+ To get pkg-config, see <http://pkg-config.freedesktop.org/>.
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it
++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+@@ -20872,21 +20711,22 @@ See \`config.log' for more details." >&2
+ else
+ DEPS_CFLAGS=$pkg_cv_DEPS_CFLAGS
+ DEPS_LIBS=$pkg_cv_DEPS_LIBS
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ :
+ fi
+
+
+ pkg_failed=no
+-{ $as_echo "$as_me:$LINENO: checking for TEST" >&5
+-$as_echo_n "checking for TEST... " >&6; }
++{ echo "$as_me:$LINENO: checking for TEST" >&5
++echo $ECHO_N "checking for TEST... $ECHO_C" >&6; }
+
+-if test -n "$TEST_CFLAGS"; then
+- pkg_cv_TEST_CFLAGS="$TEST_CFLAGS"
+- elif test -n "$PKG_CONFIG"; then
+- if test -n "$PKG_CONFIG" && \
+- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
++if test -n "$PKG_CONFIG"; then
++ if test -n "$TEST_CFLAGS"; then
++ pkg_cv_TEST_CFLAGS="$TEST_CFLAGS"
++ else
++ if test -n "$PKG_CONFIG" && \
++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
+ \$ATK_PACKAGES >= \$ATK_REQUIRED_VERSION
+ \$GTK_PACKAGES >= \$GTK_REQUIRED_VERSION
+ \$LIBBONOBO_PACKAGES >= \$LIBBONOBO_REQUIRED_VERSION
+@@ -20905,7 +20745,7 @@ if test -n "$TEST_CFLAGS"; then
+ $CSPI_PACKAGES >= $CSPI_REQUIRED_VERSION
+ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ pkg_cv_TEST_CFLAGS=`$PKG_CONFIG --cflags "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+@@ -20919,14 +20759,16 @@ if test -n "$TEST_CFLAGS"; then
+ else
+ pkg_failed=yes
+ fi
+- else
+- pkg_failed=untried
++ fi
++else
++ pkg_failed=untried
+ fi
+-if test -n "$TEST_LIBS"; then
+- pkg_cv_TEST_LIBS="$TEST_LIBS"
+- elif test -n "$PKG_CONFIG"; then
+- if test -n "$PKG_CONFIG" && \
+- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
++if test -n "$PKG_CONFIG"; then
++ if test -n "$TEST_LIBS"; then
++ pkg_cv_TEST_LIBS="$TEST_LIBS"
++ else
++ if test -n "$PKG_CONFIG" && \
++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"
+ \$ATK_PACKAGES >= \$ATK_REQUIRED_VERSION
+ \$GTK_PACKAGES >= \$GTK_REQUIRED_VERSION
+ \$LIBBONOBO_PACKAGES >= \$LIBBONOBO_REQUIRED_VERSION
+@@ -20945,7 +20787,7 @@ if test -n "$TEST_LIBS"; then
+ $CSPI_PACKAGES >= $CSPI_REQUIRED_VERSION
+ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ pkg_cv_TEST_LIBS=`$PKG_CONFIG --libs "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+@@ -20959,8 +20801,9 @@ if test -n "$TEST_LIBS"; then
+ else
+ pkg_failed=yes
+ fi
+- else
+- pkg_failed=untried
++ fi
++else
++ pkg_failed=untried
+ fi
+
+
+@@ -20973,7 +20816,7 @@ else
+ _pkg_short_errors_supported=no
+ fi
+ if test $_pkg_short_errors_supported = yes; then
+- TEST_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "
++ TEST_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+@@ -20981,9 +20824,9 @@ fi
+ $LIBGNOMEUI_PACKAGES >= $LIBGNOMEUI_REQUIRED_VERSION
+ $AT_SPI_PACKAGES >= $AT_SPI_REQUIRED_VERSION
+ $CSPI_PACKAGES >= $CSPI_REQUIRED_VERSION
+- $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION" 2>&1`
++ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION"`
+ else
+- TEST_PKG_ERRORS=`$PKG_CONFIG --print-errors "
++ TEST_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+@@ -20991,12 +20834,12 @@ fi
+ $LIBGNOMEUI_PACKAGES >= $LIBGNOMEUI_REQUIRED_VERSION
+ $AT_SPI_PACKAGES >= $AT_SPI_REQUIRED_VERSION
+ $CSPI_PACKAGES >= $CSPI_REQUIRED_VERSION
+- $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION" 2>&1`
++ $PANEL_APPLET_PACKAGES >= $PANEL_APPLET_REQUIRED_VERSION"`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$TEST_PKG_ERRORS" >&5
+
+- { { $as_echo "$as_me:$LINENO: error: Package requirements (
++ { { echo "$as_me:$LINENO: error: Package requirements (
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+@@ -21015,7 +20858,7 @@ Alternatively, you may set the environme
+ and TEST_LIBS to avoid the need to call pkg-config.
+ See the pkg-config man page for more details.
+ " >&5
+-$as_echo "$as_me: error: Package requirements (
++echo "$as_me: error: Package requirements (
+ $ATK_PACKAGES >= $ATK_REQUIRED_VERSION
+ $GTK_PACKAGES >= $GTK_REQUIRED_VERSION
+ $LIBBONOBO_PACKAGES >= $LIBBONOBO_REQUIRED_VERSION
+@@ -21036,7 +20879,7 @@ See the pkg-config man page for more det
+ " >&2;}
+ { (exit 1); exit 1; }; }
+ elif test $pkg_failed = untried; then
+- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it
++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+@@ -21046,7 +20889,7 @@ See the pkg-config man page for more det
+
+ To get pkg-config, see <http://pkg-config.freedesktop.org/>.
+ See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it
++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+@@ -21060,8 +20903,8 @@ See \`config.log' for more details." >&2
+ else
+ TEST_CFLAGS=$pkg_cv_TEST_CFLAGS
+ TEST_LIBS=$pkg_cv_TEST_LIBS
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
+ :
+ fi
+
+@@ -21104,12 +20947,11 @@ _ACEOF
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+@@ -21142,12 +20984,12 @@ $as_echo "$as_me: WARNING: Cache variabl
+ if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+-$as_echo "$as_me: updating cache $cache_file" >&6;}
++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
++echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
++echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+ fi
+ rm -f confcache
+@@ -21163,7 +21005,7 @@ ac_ltlibobjs=
+ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
++ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+@@ -21175,55 +21017,54 @@ LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
++ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
++echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
++echo "$as_me: error: conditional \"AMDEP\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
++echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test -z "${OS_WIN32_TRUE}" && test -z "${OS_WIN32_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"OS_WIN32\" was never defined.
++ { { echo "$as_me:$LINENO: error: conditional \"OS_WIN32\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"OS_WIN32\" was never defined.
++echo "$as_me: error: conditional \"OS_WIN32\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test -z "${MS_LIB_AVAILABLE_TRUE}" && test -z "${MS_LIB_AVAILABLE_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"MS_LIB_AVAILABLE\" was never defined.
++ { { echo "$as_me:$LINENO: error: conditional \"MS_LIB_AVAILABLE\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"MS_LIB_AVAILABLE\" was never defined.
++echo "$as_me: error: conditional \"MS_LIB_AVAILABLE\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ : ${CONFIG_STATUS=./config.status}
+-ac_write_fail=0
+ ac_clean_files_save=$ac_clean_files
+ ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
++echo "$as_me: creating $CONFIG_STATUS" >&6;}
++cat >$CONFIG_STATUS <<_ACEOF
+ #! $SHELL
+ # Generated by $as_me.
+ # Run this file to recreate the current configuration.
+@@ -21236,7 +21077,7 @@ ac_cs_silent=false
+ SHELL=\${CONFIG_SHELL-$SHELL}
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+ ## --------------------- ##
+ ## M4sh Initialization. ##
+ ## --------------------- ##
+@@ -21246,7 +21087,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+@@ -21268,45 +21109,17 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
+ as_cr_digits='0123456789'
+ as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+-as_nl='
+-'
+-export as_nl
+-# Printing a long string crashes Solaris 7 /usr/bin/printf.
+-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+- as_echo='printf %s\n'
+- as_echo_n='printf %s'
+-else
+- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+- as_echo_n='/usr/ucb/echo -n'
+- else
+- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+- as_echo_n_body='eval
+- arg=$1;
+- case $arg in
+- *"$as_nl"*)
+- expr "X$arg" : "X\\(.*\\)$as_nl";
+- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+- esac;
+- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+- '
+- export as_echo_n_body
+- as_echo_n='sh -c $as_echo_n_body as_echo'
+- fi
+- export as_echo_body
+- as_echo='sh -c $as_echo_body as_echo'
+-fi
+-
+ # The user is always right.
+ if test "${PATH_SEPARATOR+set}" != set; then
+- PATH_SEPARATOR=:
+- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+- PATH_SEPARATOR=';'
+- }
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
++ PATH_SEPARATOR=';'
++ else
++ PATH_SEPARATOR=:
++ fi
++ rm -f conf$$.sh
+ fi
+
+ # Support unset when possible.
+@@ -21322,6 +21135,8 @@ fi
+ # there to prevent editors from complaining about space-tab.
+ # (If _AS_PATH_WALK were called with IFS unset, it would disable word
+ # splitting by setting IFS to empty value.)
++as_nl='
++'
+ IFS=" "" $as_nl"
+
+ # Find who we are. Look in the path if we contain no directory separator.
+@@ -21344,7 +21159,7 @@ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+ fi
+
+@@ -21357,10 +21172,17 @@ PS2='> '
+ PS4='+ '
+
+ # NLS nuisances.
+-LC_ALL=C
+-export LC_ALL
+-LANGUAGE=C
+-export LANGUAGE
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++ fi
++done
+
+ # Required to use basename.
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+@@ -21382,7 +21204,7 @@ as_me=`$as_basename -- "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X/"$0" |
++echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+@@ -21433,7 +21255,7 @@ $as_unset CDPATH
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+@@ -21461,6 +21283,7 @@ case `echo -n x` in
+ *)
+ ECHO_N='-n';;
+ esac
++
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+@@ -21473,22 +21296,19 @@ if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+ else
+ rm -f conf$$.dir
+- mkdir conf$$.dir 2>/dev/null
++ mkdir conf$$.dir
+ fi
+-if (echo >conf$$.file) 2>/dev/null; then
+- if ln -s conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s='ln -s'
+- # ... but there are two gotchas:
+- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+- # In both cases, we have to default to `cp -p'.
+- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+- as_ln_s='cp -p'
+- elif ln conf$$.file conf$$ 2>/dev/null; then
+- as_ln_s=ln
+- else
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+- fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+@@ -21513,10 +21333,10 @@ else
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+- test -d "$1/.";
++ test -d "$1/.";
+ else
+ case $1 in
+- -*)set "./$1";;
++ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+@@ -21539,7 +21359,7 @@ exec 6>&1
+ # values after options handling.
+ ac_log="
+ This file was extended by Gail GNOME $as_me 1.20.1, which was
+-generated by GNU Autoconf 2.62. Invocation command line was
++generated by GNU Autoconf 2.61. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+@@ -21552,7 +21372,7 @@ on `(hostname || uname -n) 2>/dev/null |
+
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<_ACEOF
+ # Files that config.status was made for.
+ config_files="$ac_config_files"
+ config_headers="$ac_config_headers"
+@@ -21560,7 +21380,7 @@ config_commands="$ac_config_commands"
+
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+ ac_cs_usage="\
+ \`$as_me' instantiates files from templates according to the
+ current configuration.
+@@ -21573,9 +21393,9 @@ Usage: $0 [OPTIONS] [FILE]...
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+- instantiate the configuration file FILE
++ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+- instantiate the configuration header FILE
++ instantiate the configuration header FILE
+
+ Configuration files:
+ $config_files
+@@ -21589,13 +21409,13 @@ $config_commands
+ Report bugs to <bug-autoconf at gnu.org>."
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<_ACEOF
+ ac_cs_version="\\
+ Gail GNOME config.status 1.20.1
+-configured by $0, generated by GNU Autoconf 2.62,
+- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
++configured by $0, generated by GNU Autoconf 2.61,
++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+-Copyright (C) 2008 Free Software Foundation, Inc.
++Copyright (C) 2006 Free Software Foundation, Inc.
+ This config.status script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it."
+
+@@ -21603,12 +21423,11 @@ ac_pwd='$ac_pwd'
+ srcdir='$srcdir'
+ INSTALL='$INSTALL'
+ MKDIR_P='$MKDIR_P'
+-AWK='$AWK'
+-test -n "\$AWK" || AWK=awk
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+-# The default lists apply if the user does not specify any file.
++cat >>$CONFIG_STATUS <<\_ACEOF
++# If no file are specified by the user, then we need to provide default
++# value. By we need to know if files were specified by the user.
+ ac_need_defaults=:
+ while test $# != 0
+ do
+@@ -21630,36 +21449,30 @@ do
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+- $as_echo "$ac_cs_version"; exit ;;
++ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+- case $ac_optarg in
+- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+- esac
+- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
++ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+- case $ac_optarg in
+- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+- esac
+- CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+- { $as_echo "$as_me: error: ambiguous option: $1
++ { echo "$as_me: error: ambiguous option: $1
+ Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+- $as_echo "$ac_cs_usage"; exit ;;
++ echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+- -*) { $as_echo "$as_me: error: unrecognized option: $1
++ -*) { echo "$as_me: error: unrecognized option: $1
+ Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; } ;;
+
+@@ -21678,29 +21491,27 @@ if $ac_cs_silent; then
+ fi
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<_ACEOF
+ if \$ac_cs_recheck; then
+- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+- shift
+- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+- CONFIG_SHELL='$SHELL'
++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
++ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+- exec "\$@"
++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ fi
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+ exec 5>>config.log
+ {
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+ ## Running $as_me. ##
+ _ASBOX
+- $as_echo "$ac_log"
++ echo "$ac_log"
+ } >&5
+
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<_ACEOF
+ #
+ # INIT-COMMANDS
+ #
+@@ -21708,7 +21519,7 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac
+
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+
+ # Handling of arguments.
+ for ac_config_target in $ac_config_targets
+@@ -21721,8 +21532,8 @@ do
+ "gail-gnome/Makefile") CONFIG_FILES="$CONFIG_FILES gail-gnome/Makefile" ;;
+ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
+
+- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
++echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ done
+@@ -21763,143 +21574,243 @@ $debug ||
+ (umask 077 && mkdir "$tmp")
+ } ||
+ {
+- $as_echo "$as_me: cannot create a temporary directory in ." >&2
++ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+ }
+
+-# Set up the scripts for CONFIG_FILES section.
+-# No need to generate them if there are no CONFIG_FILES.
+-# This happens for instance with `./config.status config.h'.
+-if test -n "$CONFIG_FILES"; then
+-
++#
++# Set up the sed scripts for CONFIG_FILES section.
++#
+
+-ac_cr='
'
+-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+- ac_cs_awk_cr='\\r'
+-else
+- ac_cs_awk_cr=$ac_cr
+-fi
++# No need to generate the scripts if there are no CONFIG_FILES.
++# This happens for instance when ./config.status config.h
++if test -n "$CONFIG_FILES"; then
+
+-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+ _ACEOF
+
+
+-{
+- echo "cat >conf$$subs.awk <<_ACEOF" &&
+- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+- echo "_ACEOF"
+-} >conf$$subs.sh ||
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
+-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
++
+ ac_delim='%!_!# '
+ for ac_last_try in false false false false false :; do
+- . ./conf$$subs.sh ||
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
++ cat >conf$$subs.sed <<_ACEOF
++SHELL!$SHELL$ac_delim
++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
++PACKAGE_NAME!$PACKAGE_NAME$ac_delim
++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
++PACKAGE_STRING!$PACKAGE_STRING$ac_delim
++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
++exec_prefix!$exec_prefix$ac_delim
++prefix!$prefix$ac_delim
++program_transform_name!$program_transform_name$ac_delim
++bindir!$bindir$ac_delim
++sbindir!$sbindir$ac_delim
++libexecdir!$libexecdir$ac_delim
++datarootdir!$datarootdir$ac_delim
++datadir!$datadir$ac_delim
++sysconfdir!$sysconfdir$ac_delim
++sharedstatedir!$sharedstatedir$ac_delim
++localstatedir!$localstatedir$ac_delim
++includedir!$includedir$ac_delim
++oldincludedir!$oldincludedir$ac_delim
++docdir!$docdir$ac_delim
++infodir!$infodir$ac_delim
++htmldir!$htmldir$ac_delim
++dvidir!$dvidir$ac_delim
++pdfdir!$pdfdir$ac_delim
++psdir!$psdir$ac_delim
++libdir!$libdir$ac_delim
++localedir!$localedir$ac_delim
++mandir!$mandir$ac_delim
++DEFS!$DEFS$ac_delim
++ECHO_C!$ECHO_C$ac_delim
++ECHO_N!$ECHO_N$ac_delim
++ECHO_T!$ECHO_T$ac_delim
++LIBS!$LIBS$ac_delim
++build_alias!$build_alias$ac_delim
++host_alias!$host_alias$ac_delim
++target_alias!$target_alias$ac_delim
++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
++INSTALL_DATA!$INSTALL_DATA$ac_delim
++am__isrc!$am__isrc$ac_delim
++CYGPATH_W!$CYGPATH_W$ac_delim
++PACKAGE!$PACKAGE$ac_delim
++VERSION!$VERSION$ac_delim
++ACLOCAL!$ACLOCAL$ac_delim
++AUTOCONF!$AUTOCONF$ac_delim
++AUTOMAKE!$AUTOMAKE$ac_delim
++AUTOHEADER!$AUTOHEADER$ac_delim
++MAKEINFO!$MAKEINFO$ac_delim
++install_sh!$install_sh$ac_delim
++STRIP!$STRIP$ac_delim
++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
++mkdir_p!$mkdir_p$ac_delim
++AWK!$AWK$ac_delim
++SET_MAKE!$SET_MAKE$ac_delim
++am__leading_dot!$am__leading_dot$ac_delim
++AMTAR!$AMTAR$ac_delim
++am__tar!$am__tar$ac_delim
++am__untar!$am__untar$ac_delim
++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
++MAINT!$MAINT$ac_delim
++GAIL_GNOME_MAJOR_VERSION!$GAIL_GNOME_MAJOR_VERSION$ac_delim
++GAIL_GNOME_MINOR_VERSION!$GAIL_GNOME_MINOR_VERSION$ac_delim
++GAIL_GNOME_MICRO_VERSION!$GAIL_GNOME_MICRO_VERSION$ac_delim
++GAIL_GNOME_VERSION!$GAIL_GNOME_VERSION$ac_delim
++LT_RELEASE!$LT_RELEASE$ac_delim
++LT_CURRENT!$LT_CURRENT$ac_delim
++LT_REVISION!$LT_REVISION$ac_delim
++LT_AGE!$LT_AGE$ac_delim
++LT_CURRENT_MINUS_AGE!$LT_CURRENT_MINUS_AGE$ac_delim
++CC!$CC$ac_delim
++CFLAGS!$CFLAGS$ac_delim
++LDFLAGS!$LDFLAGS$ac_delim
++CPPFLAGS!$CPPFLAGS$ac_delim
++ac_ct_CC!$ac_ct_CC$ac_delim
++EXEEXT!$EXEEXT$ac_delim
++OBJEXT!$OBJEXT$ac_delim
++DEPDIR!$DEPDIR$ac_delim
++am__include!$am__include$ac_delim
++am__quote!$am__quote$ac_delim
++AMDEP_TRUE!$AMDEP_TRUE$ac_delim
++AMDEP_FALSE!$AMDEP_FALSE$ac_delim
++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
++CCDEPMODE!$CCDEPMODE$ac_delim
++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
++build!$build$ac_delim
++build_cpu!$build_cpu$ac_delim
++build_vendor!$build_vendor$ac_delim
++build_os!$build_os$ac_delim
++host!$host$ac_delim
++host_cpu!$host_cpu$ac_delim
++host_vendor!$host_vendor$ac_delim
++host_os!$host_os$ac_delim
++SED!$SED$ac_delim
++GREP!$GREP$ac_delim
++_ACEOF
+
+- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then
++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
+ break
+ elif $ac_last_try; then
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+ done
+-rm -f conf$$subs.sh
+
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+-_ACEOF
+-sed -n '
+-h
+-s/^/S["/; s/!.*/"]=/
+-p
+-g
+-s/^[^!]*!//
+-:repl
+-t repl
+-s/'"$ac_delim"'$//
+-t delim
+-:nl
+-h
+-s/\(.\{148\}\).*/\1/
+-t more1
+-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+-p
+-n
+-b repl
+-:more1
+-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+-p
+-g
+-s/.\{148\}//
+-t nl
+-:delim
+-h
+-s/\(.\{148\}\).*/\1/
+-t more2
+-s/["\\]/\\&/g; s/^/"/; s/$/"/
+-p
+-b
+-:more2
+-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+-p
+-g
+-s/.\{148\}//
+-t delim
+-' <conf$$subs.awk | sed '
+-/^[^""]/{
+- N
+- s/\n//
+-}
+-' >>$CONFIG_STATUS || ac_write_fail=1
+-rm -f conf$$subs.awk
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+-_ACAWK
+-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+- for (key in S) S_is_set[key] = 1
+- FS = ""
++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
++if test -n "$ac_eof"; then
++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
++ ac_eof=`expr $ac_eof + 1`
++fi
+
+-}
+-{
+- line = $ 0
+- nfields = split(line, field, "@")
+- substed = 0
+- len = length(field[1])
+- for (i = 2; i < nfields; i++) {
+- key = field[i]
+- keylen = length(key)
+- if (S_is_set[key]) {
+- value = S[key]
+- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+- len += length(value) + length(field[++i])
+- substed = 1
+- } else
+- len += 1 + keylen
+- }
++cat >>$CONFIG_STATUS <<_ACEOF
++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++_ACEOF
++sed '
++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
++s/^/s,@/; s/!/@,|#_!!_#|/
++:n
++t n
++s/'"$ac_delim"'$/,g/; t
++s/$/\\/; p
++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
++' >>$CONFIG_STATUS <conf$$subs.sed
++rm -f conf$$subs.sed
++cat >>$CONFIG_STATUS <<_ACEOF
++CEOF$ac_eof
++_ACEOF
+
+- print line
+-}
+
+-_ACAWK
++ac_delim='%!_!# '
++for ac_last_try in false false false false false :; do
++ cat >conf$$subs.sed <<_ACEOF
++EGREP!$EGREP$ac_delim
++LN_S!$LN_S$ac_delim
++ECHO!$ECHO$ac_delim
++AR!$AR$ac_delim
++RANLIB!$RANLIB$ac_delim
++DSYMUTIL!$DSYMUTIL$ac_delim
++NMEDIT!$NMEDIT$ac_delim
++DLLTOOL!$DLLTOOL$ac_delim
++AS!$AS$ac_delim
++OBJDUMP!$OBJDUMP$ac_delim
++CPP!$CPP$ac_delim
++CXX!$CXX$ac_delim
++CXXFLAGS!$CXXFLAGS$ac_delim
++ac_ct_CXX!$ac_ct_CXX$ac_delim
++CXXDEPMODE!$CXXDEPMODE$ac_delim
++am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
++am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
++CXXCPP!$CXXCPP$ac_delim
++F77!$F77$ac_delim
++FFLAGS!$FFLAGS$ac_delim
++ac_ct_F77!$ac_ct_F77$ac_delim
++LIBTOOL!$LIBTOOL$ac_delim
++OS_WIN32_TRUE!$OS_WIN32_TRUE$ac_delim
++OS_WIN32_FALSE!$OS_WIN32_FALSE$ac_delim
++ms_librarian!$ms_librarian$ac_delim
++MS_LIB_AVAILABLE_TRUE!$MS_LIB_AVAILABLE_TRUE$ac_delim
++MS_LIB_AVAILABLE_FALSE!$MS_LIB_AVAILABLE_FALSE$ac_delim
++ACLOCAL_AMFLAGS!$ACLOCAL_AMFLAGS$ac_delim
++WARN_CFLAGS!$WARN_CFLAGS$ac_delim
++GAIL_GNOME_DEBUG_CFLAGS!$GAIL_GNOME_DEBUG_CFLAGS$ac_delim
++PKG_CONFIG!$PKG_CONFIG$ac_delim
++DEPS_CFLAGS!$DEPS_CFLAGS$ac_delim
++DEPS_LIBS!$DEPS_LIBS$ac_delim
++TEST_CFLAGS!$TEST_CFLAGS$ac_delim
++TEST_LIBS!$TEST_LIBS$ac_delim
++AM_CPPFLAGS!$AM_CPPFLAGS$ac_delim
++AM_CFLAGS!$AM_CFLAGS$ac_delim
++AM_LDFLAGS!$AM_LDFLAGS$ac_delim
++LIBOBJS!$LIBOBJS$ac_delim
++LTLIBOBJS!$LTLIBOBJS$ac_delim
+ _ACEOF
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+-else
+- cat
+-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
++
++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then
++ break
++ elif $ac_last_try; then
++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
++ else
++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
++ fi
++done
++
++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
++if test -n "$ac_eof"; then
++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
++ ac_eof=`expr $ac_eof + 1`
++fi
++
++cat >>$CONFIG_STATUS <<_ACEOF
++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
++_ACEOF
++sed '
++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
++s/^/s,@/; s/!/@,|#_!!_#|/
++:n
++t n
++s/'"$ac_delim"'$/,g/; t
++s/$/\\/; p
++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
++' >>$CONFIG_STATUS <conf$$subs.sed
++rm -f conf$$subs.sed
++cat >>$CONFIG_STATUS <<_ACEOF
++:end
++s/|#_!!_#|//g
++CEOF$ac_eof
+ _ACEOF
+
++
+ # VPATH may cause trouble with some makes, so we remove $(srcdir),
+ # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+ # trailing colons and then remove the whole line if VPATH becomes empty
+@@ -21915,133 +21826,19 @@ s/^[^=]*=[ ]*$//
+ }'
+ fi
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+ fi # test -n "$CONFIG_FILES"
+
+-# Set up the scripts for CONFIG_HEADERS section.
+-# No need to generate them if there are no CONFIG_HEADERS.
+-# This happens for instance with `./config.status Makefile'.
+-if test -n "$CONFIG_HEADERS"; then
+-cat >"$tmp/defines.awk" <<\_ACAWK ||
+-BEGIN {
+-_ACEOF
+-
+-# Transform confdefs.h into an awk script `defines.awk', embedded as
+-# here-document in config.status, that substitutes the proper values into
+-# config.h.in to produce config.h.
+-
+-# Create a delimiter string that does not exist in confdefs.h, to ease
+-# handling of long lines.
+-ac_delim='%!_!# '
+-for ac_last_try in false false :; do
+- ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+- if test -z "$ac_t"; then
+- break
+- elif $ac_last_try; then
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
+- { (exit 1); exit 1; }; }
+- else
+- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+- fi
+-done
+-
+-# For the awk script, D is an array of macro values keyed by name,
+-# likewise P contains macro parameters if any. Preserve backslash
+-# newline sequences.
+-
+-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+-sed -n '
+-s/.\{148\}/&'"$ac_delim"'/g
+-t rset
+-:rset
+-s/^[ ]*#[ ]*define[ ][ ]*/ /
+-t def
+-d
+-:def
+-s/\\$//
+-t bsnl
+-s/["\\]/\\&/g
+-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+-D["\1"]=" \3"/p
+-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+-d
+-:bsnl
+-s/["\\]/\\&/g
+-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+-D["\1"]=" \3\\\\\\n"\\/p
+-t cont
+-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+-t cont
+-d
+-:cont
+-n
+-s/.\{148\}/&'"$ac_delim"'/g
+-t clear
+-:clear
+-s/\\$//
+-t bsnlc
+-s/["\\]/\\&/g; s/^/"/; s/$/"/p
+-d
+-:bsnlc
+-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+-b cont
+-' <confdefs.h | sed '
+-s/'"$ac_delim"'/"\\\
+-"/g' >>$CONFIG_STATUS || ac_write_fail=1
+-
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+- for (key in D) D_is_set[key] = 1
+- FS = ""
+-}
+-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+- line = \$ 0
+- split(line, arg, " ")
+- if (arg[1] == "#") {
+- defundef = arg[2]
+- mac1 = arg[3]
+- } else {
+- defundef = substr(arg[1], 2)
+- mac1 = arg[2]
+- }
+- split(mac1, mac2, "(") #)
+- macro = mac2[1]
+- if (D_is_set[macro]) {
+- # Preserve the white space surrounding the "#".
+- prefix = substr(line, 1, index(line, defundef) - 1)
+- print prefix "define", macro P[macro] D[macro]
+- next
+- } else {
+- # Replace #undef with comments. This is necessary, for example,
+- # in the case of _POSIX_SOURCE, which is predefined and required
+- # on some systems where configure will not decide to define it.
+- if (defundef == "undef") {
+- print "/*", line, "*/"
+- next
+- }
+- }
+-}
+-{ print }
+-_ACAWK
+-_ACEOF
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+- { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
+-$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
+- { (exit 1); exit 1; }; }
+-fi # test -n "$CONFIG_HEADERS"
+-
+
+-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+-shift
+-for ac_tag
++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
+ do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+-$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;}
++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
++echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+@@ -22070,38 +21867,26 @@ $as_echo "$as_me: error: Invalid tag $ac
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
++echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+- ac_file_inputs="$ac_file_inputs '$ac_f'"
++ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+- configure_input='Generated from '`
+- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+- `' by configure.'
++ configure_input="Generated from "`IFS=:
++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+-$as_echo "$as_me: creating $ac_file" >&6;}
++ { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
+ fi
+- # Neutralize special characters interpreted by sed in replacement strings.
+- case $configure_input in #(
+- *\&* | *\|* | *\\* )
+- ac_sed_conf_input=`$as_echo "$configure_input" |
+- sed 's/[\\\\&|]/\\\\&/g'`;; #(
+- *) ac_sed_conf_input=$configure_input;;
+- esac
+
+ case $ac_tag in
+- *:-:* | *:-) cat >"$tmp/stdin" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; } ;;
++ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+@@ -22111,7 +21896,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$ac_file" |
++echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -22137,7 +21922,7 @@ $as_echo X"$ac_file" |
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+@@ -22146,7 +21931,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$as_dir" |
++echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -22167,17 +21952,17 @@ $as_echo X"$as_dir" |
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
++echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+ case "$ac_dir" in
+ .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *)
+- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+@@ -22222,13 +22007,12 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_
+ esac
+ _ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+ # If the template does not know about datarootdir, expand it.
+ # FIXME: This hack should be removed a few years after 2.60.
+ ac_datarootdir_hack=; ac_datarootdir_seen=
+
+-ac_sed_dataroot='
+-/datarootdir/ {
++case `sed -n '/datarootdir/ {
+ p
+ q
+ }
+@@ -22237,14 +22021,13 @@ ac_sed_dataroot='
+ /@infodir@/p
+ /@localedir@/p
+ /@mandir@/p
+-'
+-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
++' $ac_file_inputs` in
+ *datarootdir*) ac_datarootdir_seen=yes;;
+ *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+@@ -22258,16 +22041,15 @@ _ACEOF
+ # Neutralize VPATH when `$srcdir' = `.'.
+ # Shell code in configure.ac might set extrasub.
+ # FIXME: do we really want to maintain this feature?
+-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+-ac_sed_extra="$ac_vpsub
++cat >>$CONFIG_STATUS <<_ACEOF
++ sed "$ac_vpsub
+ $extrasub
+ _ACEOF
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++cat >>$CONFIG_STATUS <<\_ACEOF
+ :t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+-s|@configure_input@|$ac_sed_conf_input|;t t
++s&@configure_input@&$configure_input&;t t
+ s&@top_builddir@&$ac_top_builddir_sub&;t t
+-s&@top_build_prefix@&$ac_top_build_prefix&;t t
+ s&@srcdir@&$ac_srcdir&;t t
+ s&@abs_srcdir@&$ac_abs_srcdir&;t t
+ s&@top_srcdir@&$ac_top_srcdir&;t t
+@@ -22278,60 +22060,121 @@ s&@abs_top_builddir@&$ac_abs_top_builddi
+ s&@INSTALL@&$ac_INSTALL&;t t
+ s&@MKDIR_P@&$ac_MKDIR_P&;t t
+ $ac_datarootdir_hack
+-"
+-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+
+ test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ which seems to be undefined. Please make sure it is defined." >&5
+-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+- -) cat "$tmp/out" && rm -f "$tmp/out";;
+- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+- esac \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++ -) cat "$tmp/out"; rm -f "$tmp/out";;
++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
++ esac
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
++_ACEOF
++
++# Transform confdefs.h into a sed script `conftest.defines', that
++# substitutes the proper values into config.h.in to produce config.h.
++rm -f conftest.defines conftest.tail
++# First, append a space to every undef/define line, to ease matching.
++echo 's/$/ /' >conftest.defines
++# Then, protect against being on the right side of a sed subst, or in
++# an unquoted here document, in config.status. If some macros were
++# called several times there might be several #defines for the same
++# symbol, which is useless. But do not sort them, since the last
++# AC_DEFINE must be honored.
++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
++# NAME is the cpp macro being defined, VALUE is the value it is being given.
++# PARAMS is the parameter list in the macro definition--in most cases, it's
++# just an empty string.
++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
++ac_dB='\\)[ (].*,\\1define\\2'
++ac_dC=' '
++ac_dD=' ,'
++
++uniq confdefs.h |
++ sed -n '
++ t rset
++ :rset
++ s/^[ ]*#[ ]*define[ ][ ]*//
++ t ok
++ d
++ :ok
++ s/[\\&,]/\\&/g
++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
++ ' >>conftest.defines
++
++# Remove the space that was appended to ease matching.
++# Then replace #undef with comments. This is necessary, for
++# example, in the case of _POSIX_SOURCE, which is predefined and required
++# on some systems where configure will not decide to define it.
++# (The regexp can be short, since the line contains either #define or #undef.)
++echo 's/ $//
++s,^[ #]*u.*,/* & */,' >>conftest.defines
++
++# Break up conftest.defines:
++ac_max_sed_lines=50
++
++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
++# et cetera.
++ac_in='$ac_file_inputs'
++ac_out='"$tmp/out1"'
++ac_nxt='"$tmp/out2"'
++
++while :
++do
++ # Write a here document:
++ cat >>$CONFIG_STATUS <<_ACEOF
++ # First, check the format of the line:
++ cat >"\$tmp/defines.sed" <<\\CEOF
++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
++b
++:def
++_ACEOF
++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
++ echo 'CEOF
++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
++ grep . conftest.tail >/dev/null || break
++ rm -f conftest.defines
++ mv conftest.tail conftest.defines
++done
++rm -f conftest.defines conftest.tail
++
++echo "ac_result=$ac_in" >>$CONFIG_STATUS
++cat >>$CONFIG_STATUS <<\_ACEOF
+ if test x"$ac_file" != x-; then
+- {
+- $as_echo "/* $configure_input */" \
+- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+- } >"$tmp/config.h" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
+- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+- { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+-$as_echo "$as_me: $ac_file is unchanged" >&6;}
++ echo "/* $configure_input */" >"$tmp/config.h"
++ cat "$ac_result" >>"$tmp/config.h"
++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
++echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+- rm -f "$ac_file"
+- mv "$tmp/config.h" "$ac_file" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++ rm -f $ac_file
++ mv "$tmp/config.h" $ac_file
+ fi
+ else
+- $as_echo "/* $configure_input */" \
+- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
+-$as_echo "$as_me: error: could not create -" >&2;}
+- { (exit 1); exit 1; }; }
++ echo "/* $configure_input */"
++ cat "$ac_result"
+ fi
+-# Compute "$ac_file"'s index in $config_headers.
+-_am_arg="$ac_file"
++ rm -f "$tmp/out12"
++# Compute $ac_file's index in $config_headers.
++_am_arg=$ac_file
+ _am_stamp_count=1
+ for _am_header in $config_headers :; do
+ case $_am_header in
+@@ -22346,7 +22189,7 @@ $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$_am_arg" |
++echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -22366,8 +22209,8 @@ $as_echo X"$_am_arg" |
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+-$as_echo "$as_me: executing $ac_file commands" >&6;}
++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
++echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+@@ -22389,7 +22232,7 @@ $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$mf" |
++echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -22433,7 +22276,7 @@ $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$file" |
++echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -22459,7 +22302,7 @@ $as_echo X"$file" |
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+@@ -22468,7 +22311,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$as_dir" |
++echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+@@ -22489,8 +22332,8 @@ $as_echo X"$as_dir" |
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
++echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+@@ -22507,11 +22350,6 @@ _ACEOF
+ chmod +x $CONFIG_STATUS
+ ac_clean_files=$ac_clean_files_save
+
+-test $ac_write_fail = 0 ||
+- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
+-
+
+ # configure is writing to config.log, and then calls config.status.
+ # config.status does its own redirection, appending to config.log.
+@@ -22533,8 +22371,4 @@ if test "$no_create" != yes; then
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+ fi
+-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+- { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5
+-$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;}
+-fi
+
+Index: libgail-gnome-1.20.1/gail-gnome/Makefile.in
+===================================================================
+--- libgail-gnome-1.20.1.orig/gail-gnome/Makefile.in 2008-11-21 20:00:06.096858540 +0100
++++ libgail-gnome-1.20.1/gail-gnome/Makefile.in 2008-11-21 20:00:38.944341110 +0100
+@@ -215,7 +215,6 @@ sharedstatedir = @sharedstatedir@
+ srcdir = @srcdir@
+ sysconfdir = @sysconfdir@
+ target_alias = @target_alias@
+-top_build_prefix = @top_build_prefix@
+ top_builddir = @top_builddir@
+ top_srcdir = @top_srcdir@
+ moduledir = $(libdir)/gtk-2.0/modules
+Index: libgail-gnome-1.20.1/ltmain.sh
+===================================================================
+--- libgail-gnome-1.20.1.orig/ltmain.sh 2008-11-21 19:59:51.336843021 +0100
++++ libgail-gnome-1.20.1/ltmain.sh 2008-04-29 22:21:21.000000000 +0200
+@@ -43,8 +43,8 @@ EXIT_FAILURE=1
+
+ PROGRAM=ltmain.sh
+ PACKAGE=libtool
+-VERSION=1.5.26
+-TIMESTAMP=" (1.1220.2.492 2008/01/30 06:40:56)"
++VERSION="1.5.26 Debian 1.5.26-4"
++TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
+
+ # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+@@ -2135,7 +2135,10 @@ EOF
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ link)
++ libs="$deplibs %DEPLIBS%"
++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++ ;;
+ esac
+ fi
+ if test "$pass" = dlopen; then
+@@ -3269,6 +3272,11 @@ EOF
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
++ *)
++ $echo "$modename: unknown library version type \`$version_type'" 1>&2
++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit $EXIT_FAILURE
++ ;;
+ esac
+ ;;
+ no)
+Index: libgail-gnome-1.20.1/test/Makefile.in
+===================================================================
+--- libgail-gnome-1.20.1.orig/test/Makefile.in 2008-11-21 20:00:06.328842214 +0100
++++ libgail-gnome-1.20.1/test/Makefile.in 2008-11-21 20:00:39.036341210 +0100
+@@ -197,7 +197,6 @@ sharedstatedir = @sharedstatedir@
+ srcdir = @srcdir@
+ sysconfdir = @sysconfdir@
+ target_alias = @target_alias@
+-top_build_prefix = @top_build_prefix@
+ top_builddir = @top_builddir@
+ top_srcdir = @top_srcdir@
+ NULL =
Copied: desktop/unstable/libgail-gnome/debian/patches/99_ltmain_as-needed.patch (from r17657, desktop/experimental/gnome-desktop/debian/patches/99_ltmain_as-needed.patch)
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/patches/99_ltmain_as-needed.patch?rev=17660&op=diff
==============================================================================
--- desktop/experimental/gnome-desktop/debian/patches/99_ltmain_as-needed.patch (original)
+++ desktop/unstable/libgail-gnome/debian/patches/99_ltmain_as-needed.patch Fri Nov 21 19:03:26 2008
@@ -1,8 +1,8 @@
-Index: nautilus-2.18.1/ltmain.sh
+Index: libgail-gnome-1.20.1/ltmain.sh
===================================================================
---- nautilus-2.18.1.orig/ltmain.sh 2006-07-13 09:12:13.000000000 +0200
-+++ nautilus-2.18.1/ltmain.sh 2007-06-06 23:36:38.899175453 +0200
-@@ -1784,6 +1784,11 @@
+--- libgail-gnome-1.20.1.orig/ltmain.sh 2008-11-21 20:01:04.036842742 +0100
++++ libgail-gnome-1.20.1/ltmain.sh 2008-11-21 20:01:04.612344237 +0100
+@@ -1807,6 +1807,11 @@ EOF
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
;;
@@ -14,7 +14,7 @@
-Wl,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
arg=
-@@ -2124,6 +2129,15 @@
+@@ -2150,6 +2155,15 @@ EOF
lib=
found=no
case $deplib in
Propchange: desktop/unstable/libgail-gnome/debian/patches/99_ltmain_as-needed.patch
------------------------------------------------------------------------------
svn:mergeinfo =
Modified: desktop/unstable/libgail-gnome/debian/patches/series
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/patches/series?rev=17660&op=diff
==============================================================================
--- desktop/unstable/libgail-gnome/debian/patches/series (original)
+++ desktop/unstable/libgail-gnome/debian/patches/series Fri Nov 21 19:03:26 2008
@@ -1,0 +1,2 @@
+90_relibtoolize.patch
+99_ltmain_as-needed.patch
Modified: desktop/unstable/libgail-gnome/debian/rules
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libgail-gnome/debian/rules?rev=17660&op=diff
==============================================================================
--- desktop/unstable/libgail-gnome/debian/rules (original)
+++ desktop/unstable/libgail-gnome/debian/rules Fri Nov 21 19:03:26 2008
@@ -14,6 +14,8 @@
DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
CFLAGS += -Wall -g -O$(if $(findstring noopt,$(DEB_BUILD_OPTIONS)),0,2)
+
+LDFLAGS += -Wl,-Bsymbolic -Wl,-O1 -Wl,-z,defs -Wl,--as-needed
DEBVERSION := $(shell dpkg-parsechangelog | sed -n -e 's/^Version: //p')
VERSION := $(shell echo $(DEBVERSION) | sed -e 's/-[^-]*$$//')
@@ -49,7 +51,7 @@
$(STAMP_DIR)/configure-stamp: $(STAMP_DIR)/patch-stamp
dh_testdir
- CFLAGS="$(CFLAGS)" ./configure $(configure_flags)
+ CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" ./configure $(configure_flags)
touch $@
configure: $(STAMP_DIR)/configure-stamp
@@ -90,7 +92,7 @@
clean:: debian/control
dh_testdir
dh_testroot
- -$(MAKE) distclean
+ [ ! -f Makefile ] || $(MAKE) distclean
# restore files from backup (before unpatching)
-test -r config.sub.orig && mv -f config.sub.orig config.sub
-test -r config.guess.orig && mv -f config.guess.orig config.guess
@@ -115,8 +117,6 @@
dh_strip -a --dbg-package=libgail-gnome-dbg
dh_compress -a
dh_fixperms -a
- dh_makeshlibs -plibgail-gnome-module \
- -V "libgail-gnome-module (>= $(VERSION))"
dh_installdeb -a
# override shlibs for libraries from this source before computing
# dependencies of packages generated from this source; we already have
More information about the pkg-gnome-commits
mailing list