r25688 - in /packages/experimental/libnotify/debian: changelog libnotify4.symbols patches/03_libtool_dont_export_private_symbols.patch patches/90_autoreconf.patch patches/series rules
pochu at users.alioth.debian.org
pochu at users.alioth.debian.org
Sat Nov 27 23:06:27 UTC 2010
Author: pochu
Date: Sat Nov 27 23:06:26 2010
New Revision: 25688
URL: http://svn.debian.org/wsvn/pkg-gnome/?sc=1&rev=25688
Log:
* debian/patches/03_libtool_dont_export_private_symbols.patch:
- Use libtool's -export-symbols-regex to not export private
symbols.
debian/patches/90_autoreconf.patch:
- Run autoreconf on top of the above patch.
debian/rules,
debian/libnotify4.symbols:
- Add a symbols file for libnotify.so.4.
Added:
packages/experimental/libnotify/debian/libnotify4.symbols
packages/experimental/libnotify/debian/patches/03_libtool_dont_export_private_symbols.patch
packages/experimental/libnotify/debian/patches/90_autoreconf.patch
Modified:
packages/experimental/libnotify/debian/changelog
packages/experimental/libnotify/debian/patches/series
packages/experimental/libnotify/debian/rules
Modified: packages/experimental/libnotify/debian/changelog
URL: http://svn.debian.org/wsvn/pkg-gnome/packages/experimental/libnotify/debian/changelog?rev=25688&op=diff
==============================================================================
--- packages/experimental/libnotify/debian/changelog [utf-8] (original)
+++ packages/experimental/libnotify/debian/changelog [utf-8] Sat Nov 27 23:06:26 2010
@@ -1,6 +1,17 @@
libnotify (0.7.0-3) UNRELEASED; urgency=low
+ [ Laurent Bigonville ]
* debian/control.in: Bump Standards-Version to 3.9.1 (no further changes)
+
+ [ Emilio Pozuelo Monfort ]
+ * debian/patches/03_libtool_dont_export_private_symbols.patch:
+ - Use libtool's -export-symbols-regex to not export private
+ symbols.
+ debian/patches/90_autoreconf.patch:
+ - Run autoreconf on top of the above patch.
+ debian/rules,
+ debian/libnotify4.symbols:
+ - Add a symbols file for libnotify.so.4.
-- Laurent Bigonville <bigon at debian.org> Mon, 22 Nov 2010 20:51:06 +0100
Added: packages/experimental/libnotify/debian/libnotify4.symbols
URL: http://svn.debian.org/wsvn/pkg-gnome/packages/experimental/libnotify/debian/libnotify4.symbols?rev=25688&op=file
==============================================================================
--- packages/experimental/libnotify/debian/libnotify4.symbols (added)
+++ packages/experimental/libnotify/debian/libnotify4.symbols [utf-8] Sat Nov 27 23:06:26 2010
@@ -1,0 +1,32 @@
+libnotify.so.4 libnotify4 #MINVER#
+* Build-Depends-Package: libnotify-dev
+ notify_get_app_name at Base 0.7.0
+ notify_get_server_caps at Base 0.7.0
+ notify_get_server_info at Base 0.7.0
+ notify_init at Base 0.7.0
+ notify_is_initted at Base 0.7.0
+ notify_marshal_VOID__UINT_STRING at Base 0.7.0
+ notify_marshal_VOID__UINT_UINT at Base 0.7.0
+ notify_notification_add_action at Base 0.7.0
+ notify_notification_clear_actions at Base 0.7.0
+ notify_notification_clear_hints at Base 0.7.0
+ notify_notification_close at Base 0.7.0
+ notify_notification_get_closed_reason at Base 0.7.0
+ notify_notification_get_type at Base 0.7.0
+ notify_notification_new at Base 0.7.0
+ notify_notification_set_category at Base 0.7.0
+ notify_notification_set_hint at Base 0.7.0
+ notify_notification_set_hint_byte at Base 0.7.0
+ notify_notification_set_hint_byte_array at Base 0.7.0
+ notify_notification_set_hint_double at Base 0.7.0
+ notify_notification_set_hint_int32 at Base 0.7.0
+ notify_notification_set_hint_string at Base 0.7.0
+ notify_notification_set_hint_uint32 at Base 0.7.0
+ notify_notification_set_icon_from_pixbuf at Base 0.7.0
+ notify_notification_set_image_from_pixbuf at Base 0.7.0
+ notify_notification_set_timeout at Base 0.7.0
+ notify_notification_set_urgency at Base 0.7.0
+ notify_notification_show at Base 0.7.0
+ notify_notification_update at Base 0.7.0
+ notify_uninit at Base 0.7.0
+ notify_urgency_get_type at Base 0.7.0
Added: packages/experimental/libnotify/debian/patches/03_libtool_dont_export_private_symbols.patch
URL: http://svn.debian.org/wsvn/pkg-gnome/packages/experimental/libnotify/debian/patches/03_libtool_dont_export_private_symbols.patch?rev=25688&op=file
==============================================================================
--- packages/experimental/libnotify/debian/patches/03_libtool_dont_export_private_symbols.patch (added)
+++ packages/experimental/libnotify/debian/patches/03_libtool_dont_export_private_symbols.patch [utf-8] Sat Nov 27 23:06:26 2010
@@ -1,0 +1,12 @@
+--- a/libnotify/Makefile.am
++++ b/libnotify/Makefile.am
+@@ -42,7 +42,8 @@
+ $(PACKAGE_LIBS)
+
+ libnotify_la_LDFLAGS = \
+- -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
++ -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) \
++ -export-symbols-regex "^[^_].*"
+
+ notify-marshal.h: notify-marshal.list
+ $(AM_V_GEN) $(GLIB_GENMARSHAL) --prefix=$(MARSHAL_PREFIX) notify-marshal.list \
Added: packages/experimental/libnotify/debian/patches/90_autoreconf.patch
URL: http://svn.debian.org/wsvn/pkg-gnome/packages/experimental/libnotify/debian/patches/90_autoreconf.patch?rev=25688&op=file
==============================================================================
--- packages/experimental/libnotify/debian/patches/90_autoreconf.patch (added)
+++ packages/experimental/libnotify/debian/patches/90_autoreconf.patch [utf-8] Sat Nov 27 23:06:26 2010
@@ -1,0 +1,2277 @@
+--- a/INSTALL
++++ b/INSTALL
+@@ -1,13 +1,25 @@
+-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+-Foundation, Inc.
++Installation Instructions
++*************************
+
+- This file is free documentation; the Free Software Foundation gives
+-unlimited permission to copy, distribute and modify it.
++Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
++2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++
++ Copying and distribution of this file, with or without modification,
++are permitted in any medium without royalty provided the copyright
++notice and this notice are preserved. This file is offered as-is,
++without warranty of any kind.
+
+ Basic Installation
+ ==================
+
+- These are generic installation instructions.
++ Briefly, the shell commands `./configure; make; make install' should
++configure, build, and install this package. The following
++more-detailed instructions are generic; see the `README' file for
++instructions specific to this package. Some packages provide this
++`INSTALL' file but do not implement all of the features documented
++below. The lack of an optional feature in a given package is not
++necessarily a bug. More recommendations for GNU packages can be found
++in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+ various system-dependent variables used during compilation. It uses
+@@ -20,9 +32,9 @@
+
+ It can also use an optional file (typically called `config.cache'
+ and enabled with `--cache-file=config.cache' or simply `-C') that saves
+-the results of its tests to speed up reconfiguring. (Caching is
++the results of its tests to speed up reconfiguring. Caching is
+ disabled by default to prevent problems with accidental use of stale
+-cache files.)
++cache files.
+
+ If you need to do unusual things to compile the package, please try
+ to figure out how `configure' could check whether to do them, and mail
+@@ -32,30 +44,37 @@
+ may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+-`configure' by a program called `autoconf'. You only need
+-`configure.ac' if you want to change it or regenerate `configure' using
+-a newer version of `autoconf'.
++`configure' by a program called `autoconf'. You need `configure.ac' if
++you want to change it or regenerate `configure' using a newer version
++of `autoconf'.
+
+-The simplest way to compile this package is:
++ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+- `./configure' to configure the package for your system. If you're
+- using `csh' on an old version of System V, you might need to type
+- `sh ./configure' instead to prevent `csh' from trying to execute
+- `configure' itself.
++ `./configure' to configure the package for your system.
+
+- Running `configure' takes awhile. While running, it prints some
+- messages telling which features it is checking for.
++ Running `configure' might take a while. While running, it prints
++ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+- the package.
++ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+- documentation.
++ documentation. When installing into a prefix owned by root, it is
++ recommended that the package be configured and built as a regular
++ user, and only the `make install' phase executed with root
++ privileges.
++
++ 5. Optionally, type `make installcheck' to repeat any self-tests, but
++ this time using the binaries in their final installed location.
++ This target does not install anything. Running this target as a
++ regular user, particularly if the prior `make install' required
++ root privileges, verifies that the installation completed
++ correctly.
+
+- 5. You can remove the program binaries and object files from the
++ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+@@ -64,6 +83,16 @@
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
++ 7. Often, you can also type `make uninstall' to remove the installed
++ files again. In practice, not all packages have tested that
++ uninstallation works correctly, even though it is required by the
++ GNU Coding Standards.
++
++ 8. Some packages, particularly those that use Automake, provide `make
++ distcheck', which can by used by developers to test that all other
++ targets like `make install' and `make uninstall' work correctly.
++ This target is generally not run by end users.
++
+ Compilers and Options
+ =====================
+
+@@ -75,7 +104,7 @@
+ by setting variables in the command line or in the environment. Here
+ is an example:
+
+- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
++ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+@@ -84,44 +113,89 @@
+
+ You can compile the package for more than one kind of computer at the
+ same time, by placing the object files for each architecture in their
+-own directory. To do this, you must use a version of `make' that
+-supports the `VPATH' variable, such as GNU `make'. `cd' to the
++own directory. To do this, you can use GNU `make'. `cd' to the
+ directory where you want the object files and executables to go and run
+ the `configure' script. `configure' automatically checks for the
+-source code in the directory that `configure' is in and in `..'.
++source code in the directory that `configure' is in and in `..'. This
++is known as a "VPATH" build.
+
+- If you have to use a `make' that does not support the `VPATH'
+-variable, you have to compile the package for one architecture at a
+-time in the source code directory. After you have installed the
+-package for one architecture, use `make distclean' before reconfiguring
+-for another architecture.
++ With a non-GNU `make', it is safer to compile the package for one
++architecture at a time in the source code directory. After you have
++installed the package for one architecture, use `make distclean' before
++reconfiguring for another architecture.
++
++ On MacOS X 10.5 and later systems, you can create libraries and
++executables that work on multiple system types--known as "fat" or
++"universal" binaries--by specifying multiple `-arch' options to the
++compiler but only a single `-arch' option to the preprocessor. Like
++this:
++
++ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
++ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
++ CPP="gcc -E" CXXCPP="g++ -E"
++
++ This is not guaranteed to produce working output in all cases, you
++may have to build one architecture at a time and combine the results
++using the `lipo' tool if you have problems.
+
+ Installation Names
+ ==================
+
+- By default, `make install' will install the package's files in
+-`/usr/local/bin', `/usr/local/man', etc. You can specify an
+-installation prefix other than `/usr/local' by giving `configure' the
+-option `--prefix=PATH'.
++ By default, `make install' installs the package's commands under
++`/usr/local/bin', include files under `/usr/local/include', etc. You
++can specify an installation prefix other than `/usr/local' by giving
++`configure' the option `--prefix=PREFIX', where PREFIX must be an
++absolute file name.
+
+ You can specify separate installation prefixes for
+ architecture-specific files and architecture-independent files. If you
+-give `configure' the option `--exec-prefix=PATH', the package will use
+-PATH as the prefix for installing programs and libraries.
+-Documentation and other data files will still use the regular prefix.
++pass the option `--exec-prefix=PREFIX' to `configure', the package uses
++PREFIX as the prefix for installing programs and libraries.
++Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+-options like `--bindir=PATH' to specify different values for particular
++options like `--bindir=DIR' to specify different values for particular
+ kinds of files. Run `configure --help' for a list of the directories
+-you can set and what kinds of files go in them.
++you can set and what kinds of files go in them. In general, the
++default for these options is expressed in terms of `${prefix}', so that
++specifying just `--prefix' will affect all of the other directory
++specifications that were not explicitly provided.
++
++ The most portable way to affect installation locations is to pass the
++correct locations to `configure'; however, many packages provide one or
++both of the following shortcuts of passing variable assignments to the
++`make install' command line to change installation locations without
++having to reconfigure or recompile.
++
++ The first method involves providing an override variable for each
++affected directory. For example, `make install
++prefix=/alternate/directory' will choose an alternate location for all
++directory configuration variables that were expressed in terms of
++`${prefix}'. Any directories that were specified during `configure',
++but not in terms of `${prefix}', must each be overridden at install
++time for the entire installation to be relocated. The approach of
++makefile variable overrides for each directory variable is required by
++the GNU Coding Standards, and ideally causes no recompilation.
++However, some platforms have known limitations with the semantics of
++shared libraries that end up requiring recompilation when using this
++method, particularly noticeable in packages that use GNU Libtool.
++
++ The second method involves providing the `DESTDIR' variable. For
++example, `make install DESTDIR=/alternate/directory' will prepend
++`/alternate/directory' before all installation names. The approach of
++`DESTDIR' overrides is not required by the GNU Coding Standards, and
++does not work on platforms that have drive letters. On the other hand,
++it does better at avoiding recompilation issues, and works well even
++when some directory options were not specified in terms of `${prefix}'
++at `configure' time.
++
++Optional Features
++=================
+
+ If the package supports it, you can cause programs to be installed
+ with an extra prefix or suffix on their names by giving `configure' the
+ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+-Optional Features
+-=================
+-
+ Some packages pay attention to `--enable-FEATURE' options to
+ `configure', where FEATURE indicates an optional part of the package.
+ They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+@@ -134,6 +208,45 @@
+ you can use the `configure' options `--x-includes=DIR' and
+ `--x-libraries=DIR' to specify their locations.
+
++ Some packages offer the ability to configure how verbose the
++execution of `make' will be. For these packages, running `./configure
++--enable-silent-rules' sets the default to minimal output, which can be
++overridden with `make V=1'; while running `./configure
++--disable-silent-rules' sets the default to verbose, which can be
++overridden with `make V=0'.
++
++Particular systems
++==================
++
++ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
++CC is not installed, it is recommended to use the following options in
++order to use an ANSI C compiler:
++
++ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
++
++and if that doesn't work, install pre-built binaries of GCC for HP-UX.
++
++ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
++parse its `<wchar.h>' header file. The option `-nodtk' can be used as
++a workaround. If GNU CC is not installed, it is therefore recommended
++to try
++
++ ./configure CC="cc"
++
++and if that doesn't work, try
++
++ ./configure CC="cc -nodtk"
++
++ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
++directory contains several dysfunctional programs; working variants of
++these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
++in your `PATH', put it _after_ `/usr/bin'.
++
++ On Haiku, software installed for all users goes in `/boot/common',
++not `/usr/local'. It is recommended to use the following options:
++
++ ./configure --prefix=/boot/common
++
+ Specifying the System Type
+ ==========================
+
+@@ -149,14 +262,15 @@
+
+ where SYSTEM can have one of these forms:
+
+- OS KERNEL-OS
++ OS
++ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+ `config.sub' isn't included in this package, then this package doesn't
+ need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+-use the `--target=TYPE' option to select the type of system they will
++use the option `--target=TYPE' to select the type of system they will
+ produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+@@ -186,9 +300,14 @@
+
+ ./configure CC=/usr/local2/bin/gcc
+
+-will cause the specified gcc to be used as the C compiler (unless it is
++causes the specified `gcc' to be used as the C compiler (unless it is
+ overridden in the site shell script).
+
++Unfortunately, this technique does not work for `CONFIG_SHELL' due to
++an Autoconf bug. Until the bug is fixed you can use this workaround:
++
++ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
++
+ `configure' Invocation
+ ======================
+
+@@ -197,7 +316,14 @@
+
+ `--help'
+ `-h'
+- Print a summary of the options to `configure', and exit.
++ Print a summary of all of the options to `configure', and exit.
++
++`--help=short'
++`--help=recursive'
++ Print a summary of the options unique to this package's
++ `configure', and exit. The `short' variant lists options used
++ only in the top level, while the `recursive' variant lists options
++ also present in any nested packages.
+
+ `--version'
+ `-V'
+@@ -224,6 +350,16 @@
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
++`--prefix=DIR'
++ Use DIR as the installation prefix. *note Installation Names::
++ for more details, including other options available for fine-tuning
++ the installation locations.
++
++`--no-create'
++`-n'
++ Run the configure checks, but stop before creating any output
++ files.
++
+ `configure' also accepts some other, not widely useful, options. Run
+ `configure --help' for more details.
+
+--- a/Makefile.in
++++ b/Makefile.in
+@@ -204,6 +204,8 @@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ PKG_CONFIG = @PKG_CONFIG@
++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ SET_MAKE = @SET_MAKE@
+--- a/aclocal.m4
++++ b/aclocal.m4
+@@ -13,13 +13,14 @@
+
+ m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
+-[m4_warning([this file was generated for autoconf 2.65.
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
++[m4_warning([this file was generated for autoconf 2.67.
+ You have another version of autoconf. It may work, but is not guaranteed to.
+ If you have problems, you may need to regenerate the build system entirely.
+ To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+ # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
++# serial 1 (pkg-config-0.24)
+ #
+ # Copyright © 2004 Scott James Remnant <scott at netsplit.com>.
+ #
+@@ -47,7 +48,10 @@
+ AC_DEFUN([PKG_PROG_PKG_CONFIG],
+ [m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+ m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
++AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
++AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
++
+ if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+ fi
+@@ -60,7 +64,6 @@
+ AC_MSG_RESULT([no])
+ PKG_CONFIG=""
+ fi
+-
+ fi[]dnl
+ ])# PKG_PROG_PKG_CONFIG
+
+@@ -69,21 +72,20 @@
+ # Check to see whether a particular set of modules exists. Similar
+ # to PKG_CHECK_MODULES(), but does not set variables or print errors.
+ #
+-#
+-# Similar to PKG_CHECK_MODULES, make sure that the first instance of
+-# this or PKG_CHECK_MODULES is called, or make sure to call
+-# PKG_CHECK_EXISTS manually
++# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
++# only at the first occurence in configure.ac, so if the first place
++# it's called might be skipped (such as if it is within an "if", you
++# have to call PKG_CHECK_EXISTS manually
+ # --------------------------------------------------------------
+ AC_DEFUN([PKG_CHECK_EXISTS],
+ [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+ if test -n "$PKG_CONFIG" && \
+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+- m4_ifval([$2], [$2], [:])
++ m4_default([$2], [:])
+ m4_ifvaln([$3], [else
+ $3])dnl
+ fi])
+
+-
+ # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+ # ---------------------------------------------
+ m4_define([_PKG_CONFIG],
+@@ -136,6 +138,7 @@
+ See the pkg-config man page for more details.])
+
+ if test $pkg_failed = yes; then
++ AC_MSG_RESULT([no])
+ _PKG_SHORT_ERRORS_SUPPORTED
+ if test $_pkg_short_errors_supported = yes; then
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+@@ -145,7 +148,7 @@
+ # Put the nasty error message in config.log where it belongs
+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+- ifelse([$4], , [AC_MSG_ERROR(dnl
++ m4_default([$4], [AC_MSG_ERROR(
+ [Package requirements ($2) were not met:
+
+ $$1_PKG_ERRORS
+@@ -153,25 +156,24 @@
+ Consider adjusting the PKG_CONFIG_PATH environment variable if you
+ installed software in a non-standard prefix.
+
+-_PKG_TEXT
+-])],
+- [AC_MSG_RESULT([no])
+- $4])
++_PKG_TEXT])[]dnl
++ ])
+ elif test $pkg_failed = untried; then
+- ifelse([$4], , [AC_MSG_FAILURE(dnl
++ AC_MSG_RESULT([no])
++ m4_default([$4], [AC_MSG_FAILURE(
+ [The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+ _PKG_TEXT
+
+-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
+- [$4])
++To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
++ ])
+ else
+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+ AC_MSG_RESULT([yes])
+- ifelse([$3], , :, [$3])
++ $3
+ fi[]dnl
+ ])# PKG_CHECK_MODULES
+
+--- a/config.guess
++++ b/config.guess
+@@ -1,10 +1,10 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ # Free Software Foundation, Inc.
+
+-timestamp='2009-11-20'
++timestamp='2009-12-30'
+
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -56,8 +56,9 @@
+ GNU config.guess ($timestamp)
+
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
++Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+--- a/config.sub
++++ b/config.sub
+@@ -1,10 +1,10 @@
+ #! /bin/sh
+ # Configuration validation subroutine script.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ # Free Software Foundation, Inc.
+
+-timestamp='2009-11-20'
++timestamp='2010-01-22'
+
+ # This file is (in principle) common to ALL GNU software.
+ # The presence of a machine in this file suggests that SOME GNU software
+@@ -75,8 +75,9 @@
+ version="\
+ GNU config.sub ($timestamp)
+
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
++Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+@@ -380,7 +381,8 @@
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++ | tile-* | tilegx-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | vax-* \
+@@ -1085,6 +1087,11 @@
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
++ # This must be matched before tile*.
++ tilegx*)
++ basic_machine=tilegx-unknown
++ os=-linux-gnu
++ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+@@ -1435,6 +1442,8 @@
+ -dicos*)
+ os=-dicos
+ ;;
++ -nacl*)
++ ;;
+ -none)
+ ;;
+ *)
+--- a/configure
++++ b/configure
+@@ -1,13 +1,13 @@
+ #! /bin/sh
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.65 for libnotify 0.7.0.
++# Generated by GNU Autoconf 2.67 for libnotify 0.7.0.
+ #
+ # Report bugs to <https://bugzilla.gnome.org/enter_bug.cgi?product=libnotify>.
+ #
+ #
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+-# Inc.
++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
++# Foundation, Inc.
+ #
+ #
+ # This configure script is free software; the Free Software Foundation
+@@ -320,7 +320,7 @@
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+ } # as_fn_mkdir_p
+@@ -360,19 +360,19 @@
+ fi # as_fn_arith
+
+
+-# as_fn_error ERROR [LINENO LOG_FD]
+-# ---------------------------------
++# as_fn_error STATUS ERROR [LINENO LOG_FD]
++# ----------------------------------------
+ # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+ # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+-# script with status $?, using 1 if that was 0.
++# script with STATUS, using 1 if that was 0.
+ as_fn_error ()
+ {
+- as_status=$?; test $as_status -eq 0 && as_status=1
+- if test "$3"; then
+- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
++ as_status=$1; test $as_status -eq 0 && as_status=1
++ if test "$4"; then
++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+- $as_echo "$as_me: error: $1" >&2
++ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+ } # as_fn_error
+
+@@ -683,7 +683,7 @@
+ exec 6>&1
+
+ # Name of the host.
+-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+ # so uname gets run too.
+ ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+@@ -772,6 +772,8 @@
+ pkg_modules
+ PACKAGE_LIBS
+ PACKAGE_CFLAGS
++PKG_CONFIG_LIBDIR
++PKG_CONFIG_PATH
+ PKG_CONFIG
+ OTOOL64
+ OTOOL
+@@ -915,6 +917,8 @@
+ CPPFLAGS
+ CPP
+ PKG_CONFIG
++PKG_CONFIG_PATH
++PKG_CONFIG_LIBDIR
+ PACKAGE_CFLAGS
+ PACKAGE_LIBS
+ TESTS_CFLAGS
+@@ -983,8 +987,9 @@
+ fi
+
+ case $ac_option in
+- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+- *) ac_optarg=yes ;;
++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
++ *=) ac_optarg= ;;
++ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+@@ -1029,7 +1034,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- as_fn_error "invalid feature name: $ac_useropt"
++ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1055,7 +1060,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- as_fn_error "invalid feature name: $ac_useropt"
++ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1259,7 +1264,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- as_fn_error "invalid package name: $ac_useropt"
++ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1275,7 +1280,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- as_fn_error "invalid package name: $ac_useropt"
++ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1305,8 +1310,8 @@
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+- -*) as_fn_error "unrecognized option: \`$ac_option'
+-Try \`$0 --help' for more information."
++ -*) as_fn_error $? "unrecognized option: \`$ac_option'
++Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+@@ -1314,7 +1319,7 @@
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+- as_fn_error "invalid variable name: \`$ac_envvar'" ;;
++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+@@ -1332,13 +1337,13 @@
+
+ if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+- as_fn_error "missing argument to $ac_option"
++ as_fn_error $? "missing argument to $ac_option"
+ fi
+
+ if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+ fi
+@@ -1361,7 +1366,7 @@
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+ done
+
+ # There might be people who depend on the old broken behavior: `$host'
+@@ -1375,8 +1380,8 @@
+ if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+- If a cross compiler is detected then cross compile mode will be used." >&2
++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
++ If a cross compiler is detected then cross compile mode will be used" >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+@@ -1391,9 +1396,9 @@
+ ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ ac_ls_di=`ls -di .` &&
+ ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+- as_fn_error "working directory cannot be determined"
++ as_fn_error $? "working directory cannot be determined"
+ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+- as_fn_error "pwd does not report name of working directory"
++ as_fn_error $? "pwd does not report name of working directory"
+
+
+ # Find the source files, if location was not specified.
+@@ -1432,11 +1437,11 @@
+ fi
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+ fi
+ ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ ac_abs_confdir=`(
+- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+ # When building in place, set srcdir=.
+ if test "$ac_abs_confdir" = "$ac_pwd"; then
+@@ -1476,7 +1481,7 @@
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+- -q, --quiet, --silent do not print \`checking...' messages
++ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+@@ -1573,6 +1578,10 @@
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ PKG_CONFIG path to pkg-config utility
++ PKG_CONFIG_PATH
++ directories to add to pkg-config's search path
++ PKG_CONFIG_LIBDIR
++ path overriding pkg-config's built-in search path
+ PACKAGE_CFLAGS
+ C compiler flags for PACKAGE, overriding pkg-config
+ PACKAGE_LIBS
+@@ -1650,9 +1659,9 @@
+ if $ac_init_version; then
+ cat <<\_ACEOF
+ libnotify configure 0.7.0
+-generated by GNU Autoconf 2.65
++generated by GNU Autoconf 2.67
+
+-Copyright (C) 2009 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This configure script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it.
+ _ACEOF
+@@ -1722,7 +1731,7 @@
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+- test $ac_status = 0; } >/dev/null && {
++ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+@@ -1747,7 +1756,7 @@
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+ $as_echo_n "checking for $2... " >&6; }
+-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
++if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ eval "$3=no"
+@@ -1843,7 +1852,7 @@
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+ $as_echo_n "checking for $2... " >&6; }
+-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
++if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+@@ -1919,7 +1928,7 @@
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+ $as_echo_n "checking for $2... " >&6; }
+-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
++if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+@@ -1982,7 +1991,7 @@
+ running configure, to aid debugging if configure makes a mistake.
+
+ It was created by libnotify $as_me 0.7.0, which was
+-generated by GNU Autoconf 2.65. Invocation command line was
++generated by GNU Autoconf 2.67. Invocation command line was
+
+ $ $0 $@
+
+@@ -2092,11 +2101,9 @@
+ {
+ echo
+
+- cat <<\_ASBOX
+-## ---------------- ##
++ $as_echo "## ---------------- ##
+ ## Cache variables. ##
+-## ---------------- ##
+-_ASBOX
++## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+ (
+@@ -2130,11 +2137,9 @@
+ )
+ echo
+
+- cat <<\_ASBOX
+-## ----------------- ##
++ $as_echo "## ----------------- ##
+ ## Output variables. ##
+-## ----------------- ##
+-_ASBOX
++## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+@@ -2147,11 +2152,9 @@
+ echo
+
+ if test -n "$ac_subst_files"; then
+- cat <<\_ASBOX
+-## ------------------- ##
++ $as_echo "## ------------------- ##
+ ## File substitutions. ##
+-## ------------------- ##
+-_ASBOX
++## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+@@ -2165,11 +2168,9 @@
+ fi
+
+ if test -s confdefs.h; then
+- cat <<\_ASBOX
+-## ----------- ##
++ $as_echo "## ----------- ##
+ ## confdefs.h. ##
+-## ----------- ##
+-_ASBOX
++## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+@@ -2224,7 +2225,12 @@
+ ac_site_file1=NONE
+ ac_site_file2=NONE
+ if test -n "$CONFIG_SITE"; then
+- ac_site_file1=$CONFIG_SITE
++ # We do not want a PATH search for config.site.
++ case $CONFIG_SITE in #((
++ -*) ac_site_file1=./$CONFIG_SITE;;
++ */*) ac_site_file1=$CONFIG_SITE;;
++ *) ac_site_file1=./$CONFIG_SITE;;
++ esac
+ elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+@@ -2239,7 +2245,11 @@
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+ $as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+- . "$ac_site_file"
++ . "$ac_site_file" \
++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "failed to load site script $ac_site_file
++See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+ done
+
+@@ -2315,7 +2325,7 @@
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+ $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+ fi
+ ## -------------------- ##
+ ## Main body of script. ##
+@@ -2388,16 +2398,22 @@
+
+ ac_aux_dir=
+ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+- for ac_t in install-sh install.sh shtool; do
+- if test -f "$ac_dir/$ac_t"; then
+- ac_aux_dir=$ac_dir
+- ac_install_sh="$ac_aux_dir/$ac_t -c"
+- break 2
+- fi
+- done
++ if test -f "$ac_dir/install-sh"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/install-sh -c"
++ break
++ elif test -f "$ac_dir/install.sh"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/install.sh -c"
++ break
++ elif test -f "$ac_dir/shtool"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
++ fi
+ done
+ if test -z "$ac_aux_dir"; then
+- as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+ fi
+
+ # These three variables are undocumented and unsupported,
+@@ -2513,11 +2529,11 @@
+ '
+ case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+- as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
+ esac
+ case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+- as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
++ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
+ esac
+
+ # Do `set' in a subshell so we don't clobber the current shell's
+@@ -2539,7 +2555,7 @@
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+- as_fn_error "ls -t appears to fail. Make sure there is not a broken
++ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+
+@@ -2549,7 +2565,7 @@
+ # Ok.
+ :
+ else
+- as_fn_error "newly created file is older than distributed files!
++ as_fn_error $? "newly created file is older than distributed files!
+ Check your system clock" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+@@ -2787,7 +2803,7 @@
+ $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+ set x ${MAKE-make}
+ ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.make <<\_ACEOF
+@@ -2795,7 +2811,7 @@
+ all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+ _ACEOF
+-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+ case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+@@ -2829,7 +2845,7 @@
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+- as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+ fi
+
+@@ -3201,8 +3217,8 @@
+
+ test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "no acceptable C compiler found in \$PATH
+-See \`config.log' for more details." "$LINENO" 5; }
++as_fn_error $? "no acceptable C compiler found in \$PATH
++See \`config.log' for more details" "$LINENO" 5 ; }
+
+ # Provide some information about the compiler.
+ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+@@ -3316,9 +3332,8 @@
+
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ as_fn_set_status 77
+-as_fn_error "C compiler cannot create executables
+-See \`config.log' for more details." "$LINENO" 5; }; }
++as_fn_error 77 "C compiler cannot create executables
++See \`config.log' for more details" "$LINENO" 5 ; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ $as_echo "yes" >&6; }
+@@ -3360,8 +3375,8 @@
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "cannot compute suffix of executables: cannot compile and link
+-See \`config.log' for more details." "$LINENO" 5; }
++as_fn_error $? "cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+ rm -f conftest conftest$ac_cv_exeext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+@@ -3418,9 +3433,9 @@
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "cannot run C compiled programs.
++as_fn_error $? "cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'.
+-See \`config.log' for more details." "$LINENO" 5; }
++See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+ fi
+ fi
+@@ -3471,8 +3486,8 @@
+
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "cannot compute suffix of object files: cannot compile
+-See \`config.log' for more details." "$LINENO" 5; }
++as_fn_error $? "cannot compute suffix of object files: cannot compile
++See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+ rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
+@@ -3924,7 +3939,7 @@
+ # Broken: fails on valid input.
+ continue
+ fi
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+@@ -3940,11 +3955,11 @@
+ ac_preproc_ok=:
+ break
+ fi
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.err conftest.i conftest.$ac_ext
+
+ done
+ # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.i conftest.err conftest.$ac_ext
+ if $ac_preproc_ok; then :
+ break
+ fi
+@@ -3983,7 +3998,7 @@
+ # Broken: fails on valid input.
+ continue
+ fi
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+@@ -3999,18 +4014,18 @@
+ ac_preproc_ok=:
+ break
+ fi
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.err conftest.i conftest.$ac_ext
+
+ done
+ # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.i conftest.err conftest.$ac_ext
+ if $ac_preproc_ok; then :
+
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "C preprocessor \"$CPP\" fails sanity check
+-See \`config.log' for more details." "$LINENO" 5; }
++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+
+ ac_ext=c
+@@ -4023,7 +4038,7 @@
+ $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+ set x ${MAKE-make}
+ ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.make <<\_ACEOF
+@@ -4031,7 +4046,7 @@
+ all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+ _ACEOF
+-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+ case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+@@ -4196,7 +4211,7 @@
+ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+- as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_GREP=$GREP
+@@ -4262,7 +4277,7 @@
+ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+- as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_EGREP=$EGREP
+@@ -4394,8 +4409,7 @@
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+ "
+-eval as_val=\$$as_ac_Header
+- if test "x$as_val" = x""yes; then :
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+ #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+ _ACEOF
+@@ -4445,7 +4459,7 @@
+
+ # Make sure we can run config.sub.
+ $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+- as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
++ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+ $as_echo_n "checking build system type... " >&6; }
+@@ -4456,16 +4470,16 @@
+ test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+ test "x$ac_build_alias" = x &&
+- as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
++ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+- as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+ $as_echo "$ac_cv_build" >&6; }
+ case $ac_cv_build in
+ *-*-*) ;;
+-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
++*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
+ esac
+ build=$ac_cv_build
+ ac_save_IFS=$IFS; IFS='-'
+@@ -4490,7 +4504,7 @@
+ ac_cv_host=$ac_cv_build
+ else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+- as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+ fi
+
+ fi
+@@ -4498,7 +4512,7 @@
+ $as_echo "$ac_cv_host" >&6; }
+ case $ac_cv_host in
+ *-*-*) ;;
+-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
++*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
+ esac
+ host=$ac_cv_host
+ ac_save_IFS=$IFS; IFS='-'
+@@ -4571,7 +4585,7 @@
+ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+- as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
++ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_SED=$SED
+@@ -4650,7 +4664,7 @@
+ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+- as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_FGREP=$FGREP
+@@ -4766,7 +4780,7 @@
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
++test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+ $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+ if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+@@ -4968,13 +4982,13 @@
+ else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:4971: $ac_compile\"" >&5)
++ (eval echo "\"\$as_me:4985: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+- (eval echo "\"\$as_me:4974: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
++ (eval echo "\"\$as_me:4988: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+- (eval echo "\"\$as_me:4977: output\"" >&5)
++ (eval echo "\"\$as_me:4991: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+@@ -5429,11 +5443,11 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd*)
++netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+@@ -6168,7 +6182,7 @@
+ ;;
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '#line 6171 "configure"' > conftest.$ac_ext
++ echo '#line 6185 "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+@@ -7430,11 +7444,11 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:7433: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7447: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:7437: \$? = $ac_status" >&5
++ echo "$as_me:7451: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -7599,7 +7613,7 @@
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+@@ -7769,11 +7783,11 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:7772: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7786: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+- echo "$as_me:7776: \$? = $ac_status" >&5
++ echo "$as_me:7790: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+@@ -7874,11 +7888,11 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:7877: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7891: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:7881: \$? = $ac_status" >&5
++ echo "$as_me:7895: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -7929,11 +7943,11 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:7932: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7946: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:7936: \$? = $ac_status" >&5
++ echo "$as_me:7950: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -8048,6 +8062,9 @@
+ openbsd*)
+ with_gnu_ld=no
+ ;;
++ linux* | k*bsd*-gnu)
++ link_all_deplibs=no
++ ;;
+ esac
+
+ ld_shlibs=yes
+@@ -8069,6 +8086,7 @@
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
++ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+@@ -8160,7 +8178,7 @@
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+- gnu* | linux* | tpf* | k*bsd*-gnu)
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+@@ -8230,7 +8248,7 @@
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -8405,6 +8423,7 @@
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
++ link_all_deplibs=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -8731,7 +8750,7 @@
+ link_all_deplibs=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -9621,7 +9640,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+@@ -9661,13 +9680,10 @@
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+- # Add ABI-specific directories to the system library path.
+- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+-
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -9679,6 +9695,18 @@
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -10299,7 +10327,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-#line 10302 "configure"
++#line 10330 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -10395,7 +10423,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-#line 10398 "configure"
++#line 10426 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -10629,6 +10657,10 @@
+ pkg_modules="gdk-pixbuf-2.0 glib-2.0 >= $REQ_GLIB_VERSION gio-2.0 >= $REQ_GLIB_VERSION"
+
+
++
++
++
++
+ if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+@@ -10741,7 +10773,6 @@
+ $as_echo "no" >&6; }
+ PKG_CONFIG=""
+ fi
+-
+ fi
+
+ pkg_failed=no
+@@ -10784,6 +10815,8 @@
+
+
+ if test $pkg_failed = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+
+ if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+@@ -10798,7 +10831,7 @@
+ # Put the nasty error message in config.log where it belongs
+ echo "$PACKAGE_PKG_ERRORS" >&5
+
+- as_fn_error "Package requirements ($pkg_modules) were not met:
++ as_fn_error $? "Package requirements ($pkg_modules) were not met:
+
+ $PACKAGE_PKG_ERRORS
+
+@@ -10807,12 +10840,13 @@
+
+ Alternatively, you may set the environment variables PACKAGE_CFLAGS
+ and PACKAGE_LIBS to avoid the need to call pkg-config.
+-See the pkg-config man page for more details.
+-" "$LINENO" 5
++See the pkg-config man page for more details." "$LINENO" 5
+ elif test $pkg_failed = untried; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "The pkg-config script could not be found or is too old. Make sure it
++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+@@ -10821,13 +10855,13 @@
+ See the pkg-config man page for more details.
+
+ To get pkg-config, see <http://pkg-config.freedesktop.org/>.
+-See \`config.log' for more details." "$LINENO" 5; }
++See \`config.log' for more details" "$LINENO" 5 ; }
+ else
+ PACKAGE_CFLAGS=$pkg_cv_PACKAGE_CFLAGS
+ PACKAGE_LIBS=$pkg_cv_PACKAGE_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ $as_echo "yes" >&6; }
+- :
++
+ fi
+
+
+@@ -10875,6 +10909,8 @@
+
+
+ if test $pkg_failed = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+
+ if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+@@ -10889,7 +10925,7 @@
+ # Put the nasty error message in config.log where it belongs
+ echo "$TESTS_PKG_ERRORS" >&5
+
+- as_fn_error "Package requirements ($tests_modules) were not met:
++ as_fn_error $? "Package requirements ($tests_modules) were not met:
+
+ $TESTS_PKG_ERRORS
+
+@@ -10898,12 +10934,13 @@
+
+ Alternatively, you may set the environment variables TESTS_CFLAGS
+ and TESTS_LIBS to avoid the need to call pkg-config.
+-See the pkg-config man page for more details.
+-" "$LINENO" 5
++See the pkg-config man page for more details." "$LINENO" 5
+ elif test $pkg_failed = untried; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-as_fn_error "The pkg-config script could not be found or is too old. Make sure it
++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
+ is in your PATH or set the PKG_CONFIG environment variable to the full
+ path to pkg-config.
+
+@@ -10912,13 +10949,13 @@
+ See the pkg-config man page for more details.
+
+ To get pkg-config, see <http://pkg-config.freedesktop.org/>.
+-See \`config.log' for more details." "$LINENO" 5; }
++See \`config.log' for more details" "$LINENO" 5 ; }
+ else
+ TESTS_CFLAGS=$pkg_cv_TESTS_CFLAGS
+ TESTS_LIBS=$pkg_cv_TESTS_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ $as_echo "yes" >&6; }
+- :
++
+ fi
+
+
+@@ -11084,7 +11121,7 @@
+ test $ac_status = 0; }; then
+ :
+ else
+- as_fn_error "You need to have gtk-doc >= 1.4 installed to build $PACKAGE_NAME" "$LINENO" 5
++ as_fn_error $? "You need to have gtk-doc >= 1.4 installed to build $PACKAGE_NAME" "$LINENO" 5
+ fi
+ fi
+
+@@ -11220,7 +11257,7 @@
+ fi
+ if test x$enable_docbook_docs = xyes; then
+ if test x$have_docbook = xno; then
+- as_fn_error "Building DocBook docs explicitly required, but DocBook not found" "$LINENO" 5
++ as_fn_error $? "Building DocBook docs explicitly required, but DocBook not found" "$LINENO" 5
+ fi
+ fi
+ if test x$enable_docbook_docs = xyes; then
+@@ -11389,6 +11426,7 @@
+
+ ac_libobjs=
+ ac_ltlibobjs=
++U=
+ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+@@ -11412,35 +11450,35 @@
+ fi
+
+ if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+- as_fn_error "conditional \"AMDEP\" was never defined.
++ as_fn_error $? "conditional \"AMDEP\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+- as_fn_error "conditional \"am__fastdepCC\" was never defined.
++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${ENABLE_GTK_DOC_TRUE}" && test -z "${ENABLE_GTK_DOC_FALSE}"; then
+- as_fn_error "conditional \"ENABLE_GTK_DOC\" was never defined.
++ as_fn_error $? "conditional \"ENABLE_GTK_DOC\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${GTK_DOC_BUILD_HTML_TRUE}" && test -z "${GTK_DOC_BUILD_HTML_FALSE}"; then
+- as_fn_error "conditional \"GTK_DOC_BUILD_HTML\" was never defined.
++ as_fn_error $? "conditional \"GTK_DOC_BUILD_HTML\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${GTK_DOC_BUILD_PDF_TRUE}" && test -z "${GTK_DOC_BUILD_PDF_FALSE}"; then
+- as_fn_error "conditional \"GTK_DOC_BUILD_PDF\" was never defined.
++ as_fn_error $? "conditional \"GTK_DOC_BUILD_PDF\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${GTK_DOC_USE_LIBTOOL_TRUE}" && test -z "${GTK_DOC_USE_LIBTOOL_FALSE}"; then
+- as_fn_error "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined.
++ as_fn_error $? "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${GTK_DOC_USE_REBASE_TRUE}" && test -z "${GTK_DOC_USE_REBASE_FALSE}"; then
+- as_fn_error "conditional \"GTK_DOC_USE_REBASE\" was never defined.
++ as_fn_error $? "conditional \"GTK_DOC_USE_REBASE\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then
+- as_fn_error "conditional \"DOCBOOK_DOCS_ENABLED\" was never defined.
++ as_fn_error $? "conditional \"DOCBOOK_DOCS_ENABLED\" was never defined.
+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+
+@@ -11590,19 +11628,19 @@
+ (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+-# as_fn_error ERROR [LINENO LOG_FD]
+-# ---------------------------------
++# as_fn_error STATUS ERROR [LINENO LOG_FD]
++# ----------------------------------------
+ # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+ # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+-# script with status $?, using 1 if that was 0.
++# script with STATUS, using 1 if that was 0.
+ as_fn_error ()
+ {
+- as_status=$?; test $as_status -eq 0 && as_status=1
+- if test "$3"; then
+- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
++ as_status=$1; test $as_status -eq 0 && as_status=1
++ if test "$4"; then
++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+- $as_echo "$as_me: error: $1" >&2
++ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+ } # as_fn_error
+
+@@ -11798,7 +11836,7 @@
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+ } # as_fn_mkdir_p
+@@ -11852,7 +11890,7 @@
+ # values after options handling.
+ ac_log="
+ This file was extended by libnotify $as_me 0.7.0, which was
+-generated by GNU Autoconf 2.65. Invocation command line was
++generated by GNU Autoconf 2.67. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+@@ -11918,10 +11956,10 @@
+ ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ ac_cs_version="\\
+ libnotify config.status 0.7.0
+-configured by $0, generated by GNU Autoconf 2.65,
++configured by $0, generated by GNU Autoconf 2.67,
+ with options \\"\$ac_cs_config\\"
+
+-Copyright (C) 2009 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This config.status script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it."
+
+@@ -11939,11 +11977,16 @@
+ while test $# != 0
+ do
+ case $1 in
+- --*=*)
++ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
++ --*=)
++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
++ ac_optarg=
++ ac_shift=:
++ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+@@ -11965,6 +12008,7 @@
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+@@ -11977,7 +12021,7 @@
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+- as_fn_error "ambiguous option: \`$1'
++ as_fn_error $? "ambiguous option: \`$1'
+ Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+@@ -11986,7 +12030,7 @@
+ ac_cs_silent=: ;;
+
+ # This is an error.
+- -*) as_fn_error "unrecognized option: \`$1'
++ -*) as_fn_error $? "unrecognized option: \`$1'
+ Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+@@ -12307,7 +12351,7 @@
+ "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;;
+
+- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
+ esac
+ done
+
+@@ -12345,7 +12389,7 @@
+ {
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+
+ # Set up the scripts for CONFIG_FILES section.
+ # No need to generate them if there are no CONFIG_FILES.
+@@ -12362,7 +12406,7 @@
+ fi
+ ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+ if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+- ac_cs_awk_cr='\r'
++ ac_cs_awk_cr='\\r'
+ else
+ ac_cs_awk_cr=$ac_cr
+ fi
+@@ -12376,18 +12420,18 @@
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+ } >conf$$subs.sh ||
+- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ ac_delim='%!_!# '
+ for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+@@ -12476,20 +12520,28 @@
+ else
+ cat
+ fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+- || as_fn_error "could not setup config files machinery" "$LINENO" 5
++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+ _ACEOF
+
+-# VPATH may cause trouble with some makes, so we remove $(srcdir),
+-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
++# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+ # trailing colons and then remove the whole line if VPATH becomes empty
+ # (actually we leave an empty line to preserve line numbers).
+ if test "x$srcdir" = x.; then
+- ac_vpsub='/^[ ]*VPATH[ ]*=/{
+-s/:*\$(srcdir):*/:/
+-s/:*\${srcdir}:*/:/
+-s/:*@srcdir@:*/:/
+-s/^\([^=]*=[ ]*\):*/\1/
++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
++h
++s///
++s/^/:/
++s/[ ]*$/:/
++s/:\$(srcdir):/:/g
++s/:\${srcdir}:/:/g
++s/:@srcdir@:/:/g
++s/^:*//
+ s/:*$//
++x
++s/\(=[ ]*\).*/\1/
++G
++s/\n//
+ s/^[^=]*=[ ]*$//
+ }'
+ fi
+@@ -12517,7 +12569,7 @@
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+- as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
++ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+@@ -12602,7 +12654,7 @@
+ _ACAWK
+ _ACEOF
+ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+- as_fn_error "could not setup config headers machinery" "$LINENO" 5
++ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+ fi # test -n "$CONFIG_HEADERS"
+
+
+@@ -12615,7 +12667,7 @@
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+@@ -12643,7 +12695,7 @@
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+@@ -12670,7 +12722,7 @@
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+@@ -12807,22 +12859,22 @@
+ $ac_datarootdir_hack
+ "
+ eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+- || as_fn_error "could not create $ac_file" "$LINENO" 5
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+ test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+-which seems to be undefined. Please make sure it is defined." >&5
++which seems to be undefined. Please make sure it is defined" >&5
+ $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+-which seems to be undefined. Please make sure it is defined." >&2;}
++which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+- || as_fn_error "could not create $ac_file" "$LINENO" 5
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+@@ -12833,19 +12885,19 @@
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+- || as_fn_error "could not create $ac_file" "$LINENO" 5
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+ $as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+- || as_fn_error "could not create $ac_file" "$LINENO" 5
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+- || as_fn_error "could not create -" "$LINENO" 5
++ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+ # Compute "$ac_file"'s index in $config_headers.
+ _am_arg="$ac_file"
+@@ -13630,7 +13682,7 @@
+ ac_clean_files=$ac_clean_files_save
+
+ test $ac_write_fail = 0 ||
+- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+ # configure is writing to config.log, and then calls config.status.
+@@ -13651,7 +13703,7 @@
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+- $ac_cs_success || as_fn_exit $?
++ $ac_cs_success || as_fn_exit 1
+ fi
+ if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+--- a/docs/Makefile.in
++++ b/docs/Makefile.in
+@@ -188,6 +188,8 @@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ PKG_CONFIG = @PKG_CONFIG@
++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ SET_MAKE = @SET_MAKE@
+--- a/docs/reference/Makefile.in
++++ b/docs/reference/Makefile.in
+@@ -131,6 +131,8 @@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ PKG_CONFIG = @PKG_CONFIG@
++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ SET_MAKE = @SET_MAKE@
+--- a/libnotify/Makefile.in
++++ b/libnotify/Makefile.in
+@@ -185,6 +185,8 @@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ PKG_CONFIG = @PKG_CONFIG@
++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ SET_MAKE = @SET_MAKE@
+@@ -289,7 +291,8 @@
+ $(PACKAGE_LIBS)
+
+ libnotify_la_LDFLAGS = \
+- -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
++ -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) \
++ -export-symbols-regex "^[^_].*"
+
+ EXTRA_DIST = \
+ notify-marshal.list \
+--- a/ltmain.sh
++++ b/ltmain.sh
+@@ -65,7 +65,7 @@
+ # compiler: $LTCC
+ # compiler flags: $LTCFLAGS
+ # linker: $LD (gnu? $with_gnu_ld)
+-# $progname: (GNU libtool) 2.2.6b
++# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2
+ # automake: $automake_version
+ # autoconf: $autoconf_version
+ #
+@@ -73,7 +73,7 @@
+
+ PROGRAM=ltmain.sh
+ PACKAGE=libtool
+-VERSION=2.2.6b
++VERSION="2.2.6b Debian-2.2.6b-2"
+ TIMESTAMP=""
+ package_revision=1.3017
+
+@@ -5033,7 +5033,10 @@
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ link)
++ libs="$deplibs %DEPLIBS%"
++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++ ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+@@ -5344,19 +5347,19 @@
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ if $opt_duplicate_deps ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
++ tmp_libs="$tmp_libs $deplib"
++ done
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- deplibs="$deplib $deplibs"
+- if $opt_duplicate_deps ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done
+ continue
+ fi # $pass = conv
+
+@@ -5893,6 +5896,7 @@
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
++ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+@@ -6206,6 +6210,9 @@
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
++ *)
++ func_fatal_configuration "$modename: unknown library version type \`$version_type'"
++ ;;
+ esac
+ ;;
+ no)
+--- a/m4/libtool.m4
++++ b/m4/libtool.m4
+@@ -2445,7 +2445,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+@@ -2470,13 +2470,10 @@
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+- # Add ABI-specific directories to the system library path.
+- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+-
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -2488,6 +2485,18 @@
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -3075,11 +3084,11 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd*)
++netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+@@ -3696,7 +3705,7 @@
+ ;;
+ esac
+ ;;
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+@@ -3760,7 +3769,7 @@
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+@@ -3980,7 +3989,7 @@
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+@@ -4185,6 +4194,9 @@
+ cygwin* | mingw* | cegcc*)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
++ linux* | k*bsd*-gnu)
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+@@ -4249,6 +4261,9 @@
+ openbsd*)
+ with_gnu_ld=no
+ ;;
++ linux* | k*bsd*-gnu)
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+@@ -4270,6 +4285,7 @@
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
++ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+@@ -4361,7 +4377,7 @@
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+- gnu* | linux* | tpf* | k*bsd*-gnu)
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+@@ -4431,7 +4447,7 @@
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -4606,6 +4622,7 @@
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
++ _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -4844,7 +4861,7 @@
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -5844,7 +5861,7 @@
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+--- a/tests/Makefile.in
++++ b/tests/Makefile.in
+@@ -224,6 +224,8 @@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ PKG_CONFIG = @PKG_CONFIG@
++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ SET_MAKE = @SET_MAKE@
+--- a/tools/Makefile.in
++++ b/tools/Makefile.in
+@@ -159,6 +159,8 @@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ PKG_CONFIG = @PKG_CONFIG@
++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ SET_MAKE = @SET_MAKE@
Modified: packages/experimental/libnotify/debian/patches/series
URL: http://svn.debian.org/wsvn/pkg-gnome/packages/experimental/libnotify/debian/patches/series?rev=25688&op=diff
==============================================================================
--- packages/experimental/libnotify/debian/patches/series [utf-8] (original)
+++ packages/experimental/libnotify/debian/patches/series [utf-8] Sat Nov 27 23:06:26 2010
@@ -1,3 +1,5 @@
01_upstream_fix_license_header.patch
02_upstream_ref_pixbuf.patch
+03_libtool_dont_export_private_symbols.patch
+90_autoreconf.patch
99_ltmain_as-needed.patch
Modified: packages/experimental/libnotify/debian/rules
URL: http://svn.debian.org/wsvn/pkg-gnome/packages/experimental/libnotify/debian/rules?rev=25688&op=diff
==============================================================================
--- packages/experimental/libnotify/debian/rules [utf-8] (original)
+++ packages/experimental/libnotify/debian/rules [utf-8] Sat Nov 27 23:06:26 2010
@@ -11,4 +11,4 @@
LDFLAGS += -Wl,-z,defs -Wl,-O1 -Wl,--as-needed
-DEB_DH_MAKESHLIBS_ARGS_libnotify4 := -V "libnotify4 (>= 0.7.0)"
+DEB_DH_MAKESHLIBS_ARGS_libnotify4 := -V "libnotify4 (>= 0.7.0)" -- -c4
More information about the pkg-gnome-commits
mailing list