[hamradio-commits] [dump1090] 372/373: revert to upstream for this branch
Matthew Ernisse
mernisse-guest at moszumanska.debian.org
Thu Oct 23 14:58:38 UTC 2014
This is an automated email from the git hooks/post-receive script.
mernisse-guest pushed a commit to branch backport
in repository dump1090.
commit 9004a513c521858ad090d4397da3e75e4cc540af
Author: Matthew Ernisse <mernisse at ub3rgeek.net>
Date: Tue Oct 21 21:05:42 2014 -0400
revert to upstream for this branch
---
debian/CHANGES | 3482 -----------------------------------
debian/README.Debian | 19 -
debian/changelog | 51 -
debian/compat | 1 -
debian/control | 32 -
debian/copyright | 139 --
debian/docs | 2 -
debian/dump1090.1 | 288 ---
debian/dump1090.default | 12 -
debian/dump1090.dirs | 2 -
debian/dump1090.examples | 2 -
debian/dump1090.install | 11 -
debian/dump1090.links | 5 -
debian/dump1090.manpages | 1 -
debian/init.d | 164 --
debian/lintian-overrides | 3 -
debian/patches/00-makefile.patch | 34 -
debian/patches/01-jquery.patch | 19 -
debian/patches/02-http-buffer.patch | 111 --
debian/patches/03-excanvas.patch | 14 -
debian/patches/series | 4 -
debian/rules | 12 -
debian/source/format | 1 -
debian/view1090.1 | 139 --
24 files changed, 4548 deletions(-)
diff --git a/debian/CHANGES b/debian/CHANGES
deleted file mode 100644
index 504d547..0000000
--- a/debian/CHANGES
+++ /dev/null
@@ -1,3482 +0,0 @@
-# Generated with: git log --pretty=format:"Commit: %h%n%B%N%n%aN <%ae>%n%n"
-
-Commit: 65751ed
-Merge pull request #45 from mutability/net-client-eof-handling
-
-Detect client EOF properly. Handle EWOULDBLOCK.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: dee6ded
-Merge pull request #35 from mutability/use-repaired-checksums
-
-Check if bit correction happened before bailing out due to a bad CRC.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 4f449a8
-Make Pull # compatible with Pull #42
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 16a900c
-Merge pull request #42 from mutability/prefer-global-cpr
-
-Prefer to use global CPR decoding where possible.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: bc496fb
-Merge pull request #43 from mutability/more-stats
-
-Add --stats-every option, add sample block counters
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 5a5c52d
-Merge remote-tracking branch 'origin/pr/46'
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 98f5105
-Merge pull request #47 from mutability/flightradar-compat-fix
-
-Always emit a message reception time, as otherwise the FR24 uploader is unhappy.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 15f3408
-Always emit a message reception time, as otherwise the FR24 uploader is unhappy.
-
-When we don't have a time available (e.g. remote message) use the system time.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: bf11136
-Merge pull request #44 from mutability/fix-obinary
-
-Only use O_BINARY on Win32
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 186cac5
-Use the anet-reported error string when reporting bind errors.
-
-errno may have been modified by the time you see it.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: a513c36
-Detect client EOF properly. Handle EWOULDBLOCK.
-
-Client disconnection appears as a read of 0 bytes.
-Without a test for this, dump1090 continues to poll that client forever.
-
-Also, read() may return EWOULDBLOCK as well as EAGAIN
-for "no data right now", so handle that.
-
-I don't know if there is an equivalent Win32 bug here as the Win32
-interfaces seem subtly different to vanilla POSIX.
-
-The following test/break can probably be removed if Win32 needs
-the same fix.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 98c7c73
-Only use O_BINARY on Win32
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: c09c684
-Merge pull request #41 from mutability/skip-remote-timestamps
-
-Don't output message reception time in SBS format for remote messages.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: e3bbf7b
-Read Files are binary
-
-When replaying recordings, the read files are binary, so the file open
-needs to reflect this so that spurious end of file characters aren't
-misinterpreted.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: aa063ba
-Undo Parts of Pull request #29
-
-The table sizing doesn't seem to work in M$ IE8 and IE9.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 732fe52
-Merge pull request #28 from ddeitterick/change_plotted_plane_table_bg_color
-
-Change the Background Color for a Plotted Plane
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 9d3452f
-Merge pull request #27 from ddeitterick/format_track_field
-
-Add Degree Symbol to Track Value
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 5cdcc22
-Merge pull request #29 from tslocum/bettermap
-
-Improve map display layout and styling
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: bd151e1
-Merge pull request #40 from mutability/discard-bad-cpr-latitudes
-
-Reject out-of-range latitudes when doing CPR decoding.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 8725ba0
-Merge pull request #39 from mutability/fractional-gain
-
-Fix --gain with fractional gain values.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: b98c685
-Move the stats reset strictly after stats display, so the total message count is shown correctly.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 3eb39ab
-Don't output message reception time in SBS format for remote messages.
-
-For remotely received messages that have a mlat timestamp, we have no
-useful way of turning that timestamp into a wallclock timestamp, so
-don't try, or we'll just produce wildly wrong results (_days_ in error)
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 4fc2697
-Add stats for number of sample blocks processed and dropped.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 1006167
-Add --stats-every <secs> option.
-
-Periodically displays and resets stats.
-Useful for unattended operation.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 661246d
-Prefer to use global CPR decoding where possible.
-
-There is a danger in always using relative decoding where possible.
-If there is an undetected error in the first pair of messages received,
-then global CPR decoding will give a bad position, and subsequent
-relative decoding will just walk around near that bad position even
-though many error-free pairs of odd/even messages may have been received.
-
-The first pair of position messages also tends to be the most error-prone, as
-they are usually received at the extreme edge of receiver range.
-
-(I see this happen at least once a day in practice)
-
-So, instead, prefer to use global decoding when we have sufficiently recent data.
-With recent data this should always be as good as relative decoding, and it
-avoids getting stuck with bad data for long periods of time. If we don't have
-enough recent data for a global solution, fall back to relative decoding.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: e5b3572
-Reject out-of-range latitudes when doing CPR decoding.
-
-If a CPR message with an undetected error is received this can produce out-of-range results for latitude.
-e.g. even latitude of 78000, odd latitude of 0 produces a latitude index j=35 and rlat0 = 213.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 95ccb90
-Fix --gain with fractional gain values.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: 7fab5b0
-Check if bit correction happened before bailing out due to a bad CRC.
-
-Oliver Jowett <oliver at mutability.co.uk>
-
-
-Commit: b7d01c5
-Don't restrict sidebar width
-
-Trevor Slocum <tslocum at gmail.com>
-
-
-Commit: 14ff25b
-Improve map display layout and styling
-
-Trevor Slocum <tslocum at gmail.com>
-
-
-Commit: a82df07
-Version 1.09.0608.14
-
-Release of COAA PlanePlotter MLAT and SMU support for RPi
-
-ppup1090 now supports Ground Stations functions required for MLAT and
-SMU operation. This is *ONLY* available for RPi and similar linux
-hardware.
-
-Also included are sample startup scripts for dump1090 only and
-dump1090+ppup1090 together.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 90fa1da
-net_io port 30003 bug
-
-Thanks to "Harrie" for this one.
-Fix the SBS port 30003 stream to always include speed and/or heading
-when available.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f1b85ec
-Tidy up interactive.c
-
-Remove spaces from the end of line.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 845289a
-Version 1.09.1607.14
-
-Improvements to COAA MLAT functions
-Reduce CPU load in PPUP1090 and DUMP1090 during cleanup
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8b05286
-Version 1.09.1007.14
-
-Updates to support COAA Planeplotter Ground Station on an RPi
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: df4a8ce
-Change the Background Color for a Plotted Plane
-
-Changed the background color for a plotted plane in the planes table to
-something that was more easily visible.
-
-ddeitterick <doug at deitterick.com>
-
-
-Commit: 0c2487d
-Add Degree Symbol to Track Value
-
-Add the degree symbol to the "Track:" value in the plane details
-section.
-
-ddeitterick <doug at deitterick.com>
-
-
-Commit: a17e5b0
-Merge pull request #23 from hhm0/decoding
-
-use last recent airplane position to calculate its ground position
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: d1b37ad
-B"H decoding: use last air position to calculate ground position
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: 60e2c92
-Merge pull request #21 from hhm0/view1090_net_mods
-
-View1090 net mods
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: f68ae55
-Merge pull request #22 from matthewbrandes/master
-
-Allows choosing device by serial number rather than device index which can change.
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 6f14ecf
-Update dump1090.c
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: c805822
-Delete convienience.c
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: 3043e86
-Delete convienience.h
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: 652af93
-Update dump1090.c
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: d020756
-Update dump1090.c
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: a190677
-Create convienience.c
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: 50b05c5
-Create convienience.h
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: 8110549
-Update dump1090.c
-matthewbrandes <matthewb at report4u.net>
-
-
-Commit: a86eb7a
-B"H view1090: do not use pthreads
-
-It *seems* that pthreads are used in dump1090 for I/! sample reading
-only. So view1090 need not use pthread_exit.
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: ec09cc7
-B"H view1090: sleep a bit between loops
-
-view1090 was using close to 100% CPU before, with the non-blocking
-commits and the reconnection code. sleep a bit between loop iterations
-to keep CPU usage low.
-
-CPU usage with this addition was down to <1% in testing.
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: 350a57f
-B"H view1090: do not block
-
- - do not block on network data
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: 96015e3
-B"H view1090: handle disconnection
-
- - keep trying to reconnect to server if disconnected
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: c0d6ea0
-Merge pull request #20 from hhm0/network_disabling
-
-make network services disable-able
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 190a746
-Merge pull request #19 from hhm0/decoding
-
-decode more squawk codes
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 59984ac
-B"H allow disable ports, doc disable net heartbeat
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: 506be6e
-B"H decode more data, etc.
-
-- decodes a bit more information
-- misc. small changes
-
-hhm <heehooman+vcs-ci at gmail.com>
-
-
-Commit: 189e726
-Merge pull request #16 from papasven/master
-
-Incorrect value for auto-gain
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: e6c4338
-Incorrect value for auto-gain
-
-Incorrect value for auto-gain option the Modes.gain is multiplied by 10.
-papasven <sven.haendel at arcor.de>
-
-
-Commit: 6afdc9b
-Merge remote-tracking branch 'origin/Debug'
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 903f93f
-Publish Version 1.08.2705.14
-
-A few minor additions and bug fixes as detailed below
-
-1) Additional command line option "--net-buffer <n>" to specify the TCP
-output buffer size. Default is n=0, which is 64Kb. Specify a value of n
-to increase the buffer size according to Size = 64Kb * 2^n, so an n of
-1 = 128Kb, n=2 is 256Kb etc. n is limited to 7, so the max size is 8Mb.
-This option may assist if you have a high number of aircraft being
-received, and an unreliable network connection, or if the receiving end
-can be busy for an extended time.
-
-2) Bug fix in ppup1090 which prevented the uploading of valid
-ModeA/Squawk codes
-
-3) Bug fix per Markus Grab's commit.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 00533e7
-Fixed: now skipping correct number of values in magnitude buffer
-
-Variable j points to the current location in the magnitude vector.
-When decoding a message (MODES_PREAMBLE_US+msglen)*2 is added to j.
-In the loop head j is increased by 1, so one value was skipped.
-
-Markus Gräb <m_graeb11 at cs.uni-kl.de>
-
-
-Commit: dfb3191
-Merge pull request #14 from kopppa91/master
-
-Fixed: now skipping correct number of values in magnitude buffer
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 583f242
-Fixed: now skipping correct number of values in magnitude buffer
-
-Variable j points to the current location in the magnitude vector.
-When decoding a message (MODES_PREAMBLE_US+msglen)*2 is added to j.
-In the loop head j is increased by 1, so one value was skipped.
-
-Markus Gräb <m_graeb11 at cs.uni-kl.de>
-
-
-Commit: a55b9a7
-BUGFIX : Windows version HTML Web browser support
-
-Allow connection of a web browser to the Windows version via
-http://127.0.0.1:8080
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d200099
-BUGFIX : Possible linked list bug
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 30ae45e
-Windows Version of dump1090
-
-Make the modifications necessary to compile dump1090 for WinXP, Win7 and
-hopefully Win8.
-
-The files can be compiled using M$ Visual Studio/C++ 6.0. Due to various
-licensing issues, I haven't included the libraries or DLLs. You will
-need to locate pthreadVC2.lib and rtlsdr.lib to link the file, install
-the zadig drivers to support the dongle, and locate libusb-1.0.dll,
-msvcr100.dll, pthreadVC2.dll and rtlsdr.dll.
-
-dump1090.exe will not run on any Windows version prior to XP SP2,
-because msvcr100.dll imports several functions from the Windows kernel
-that are not available on earlier versions. This means dump1090 won't
-work on Win2K.
-
-The major change to the code relates to file handles. The original code
-assumes Linux behaviour in that handles are allocated from 0
-sequentially upwards. However Windows handles are allocated pseudo
-randomly, and handle numbers greater than 1024 would break the code. The
-code has therefore been modified to use a linked list of connection
-structures, rather than a static array limited to 1024 entries.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f7843c1
-Implement TCP Heartbeat
-
-Some users have reported issues where the TCP link to dump1090 can be
-lost at times of low traffic density - typically in the middle of the
-night. One possible reason for this is that some routers drop the link
-if there is no traffic for a predetermined period.
-
-To try and resolve this, dump1090 now sends a 'null' packet consisting
-of 7 "0x00" bytes approximately once a minute if there is no real
-received traffic during this time. This packet should be discarded by
-the application receiving the dump1090 because it will have an invalid
-checksum, and ICAO address 0x000000 is also invalid. However, this null
-packet should be enough to keep routers alive.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 4a438d6
-Update the Windows version of View1090
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 97c7f69
-Publish V1.08.2302.14
-
-Final tidy up and publish
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 260b955
-BUGFIX : Beast Binary Escape characters
-
-Thanks to Blort on the PP list.
-
-The Beast binary message stream uses the 0x1a character a and escape to
-mark the beginning of a new message. However, the 0x1a character could
-occur in the body of a message since the message is binary. Therefore,
-the 0x1a is repeated -as Blort put it :
-
-This 56-bit Mode S Frame (containing a 1a) is supposed to look like
-this:
-
-1a 32 00 00 48 7b a6 1a 1a 0c 20 28 17 b0 c0 c3 b0
-
-What is actually looks (looked) like (from wireshark) is this:
-
-1a 32 00 00 48 7b a6 1a 0c 20 28 17 b0 c0 c3 b0
-
-There are supposed to be two 1A’s (Gunter’s Escape Character) in a row
-(1A 1A) whenever a data byte contains 1A, after the initial two 1A 3x
-characters.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 75a4c6e
-BUGFIX : Missed data causes timestamp slip
-
-The Mutex on the RTL data reader thread does not "force" the data
-processing thread to execute. Therefore, if the processor is busy, it is
-possible for a second RTL callback to occur before the data from the
-first has been processed. This will cause the loss of the first data,
-but worse, it will cause a slip in the timestamp. This upsets Beamfinder
-and MLAT operation in PlanePlotter.
-
-To solve this, keep a Fifo buffer which is filled by the callback
-thread, and emptied by the data processing thread. The fifo is the same
-size as the number of buffers requested in the call to
-rtlsdr_read_async().
-
-Note - we only put the value of the pointer supplied in the callback
-into the fifo. We do not attempt to cache the data in the buffer pointed
-to by the pointer. This would require us to memcopy() 2Mbytes per
-second, which we don't want to do if we don't have to because it will
-only make the processor loading worse. Instead, we assume that the data
-in the buffer will remain valid after the callback returns, at least
-until it is overwritten by new data.
-
-It is still possible for us to lose data if we can't process it quickly
-enough. However, we can now detect this loss of data when the fifo is
-almost full, and correct the timestamp for the lost block/blocks.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 24080a2
-antirez
-
-Free the client on best effort write(2) short write
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: b9a1a3e
-antirez
-
-modesFreeClient() optimized to find new maxfd faster
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f331887
-antirez
-
-Constant replaced with macro MODES_NET_SERVICES_NUM.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 86093ea
-WIZARDISHUNGRY
-
-Dynamically size terminal using SIGWINCH
-
-https://github.com/antirez/dump1090/commit/f18180fef4ea6e0195d55439d93c4d717c35da8f
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e9d2232
-Honor LDFLAGS
-
-Adam Cécile (Le_Vert) <gandalf at le-vert.net>
-
-
-Commit: b921d80
-Typo fixes
-
-Adam Cécile (Le_Vert) <gandalf at le-vert.net>
-
-
-Commit: fe9d168
-Bug fix in ppup1090
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f3b5167
-Create separate Makefiles
-
-Create separate makefiles for dump1090, view1090 and ppup1090. These can
-be run with the command line "make -f makedump1090", "make -f
-makeview1019" and "make -f makeppup1090"
-
-Pass dump1090 version number into ppup1090 uploader so that coaa1090.obj
-doesn't need re-compiling between versions.
-
-Remove ppup1090 from general Makefile - it's not intended for anything
-other than RPi, so gives linker errors on other (non Linux raspian)
-systems.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 11502e9
-Extra list decoding for DF-0 and DF-16
-
-Extra list decoding for DF-0 and DF-16
-Tidy up a few things
-Change version number
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 64b24eb
-Bugfix in position decoding
-
-If the aircraft lands or takes off, the Lat/Lon valid flags are cleared.
-In the original code, this also resulted in any even/odd position
-reports in the mm record being discarded This meant that the code would
-require an even and odd position after the change of flight status.
-
-The code had been modified so that any position report in the mm record
-is used even if there is a change of flight status. This means there
-only needs to be an even or odd after a change of FS, rather than
-requiring both even and odd. The result should be earlier decoding of
-position.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: fa004fc
-DF-11 SI/II Detection changes
-
-Don't allow detection of DF-11 SI/II until we have received at least one
-DF-11 for the aircraft with an SI/II of zero.
-
-Previous versions would allow an ICAOAddr to be marked as valid if a
-DF-11 was received where the crc was less than 80. This is required for
-SI/II detection where the SI/II is overlaid on the crc field. However,
-this also decreaces the security of the crc. It is possible for a
-corrupt message to result in a crc value of between 1 and 79, and this
-will lead to an invalid ICAOAddr being marked as received.
-
-To try and prevent this, do not allow detection of DF-11 II/SI fields
-until at least one DF-11 crc=0 has been received. Once this happens, we
-ca be fairly sure that this aircraft really is within range, and so
-II/SI detection can e used.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f50744b
-Better Incorporate coaa.h
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f821613
-mode_ac.c comit
-
-Dunno why - haven't changed it - but github is forcing me to re-commit
-this.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 5b5424d
-View1090 WinXP bugfix
-
-Updated the way socket handles are used in View1090 to maintain
-compatibility between UNIX and Windows.
-
-Added the initial attempt at a Planeplotter uploader
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: a968f03
-Stop heading using multiple lines
-
-In the table view of aircraft, the heading was displayed as "330 (NW)"
-or similar. However, this cause the entry to scroll over into two lines
-of text, and reduces the number of planes that can be seen in the table
-at any one time.
-
-There probably should be a way to make the table view wider by scrolling
-it, but I can't see any way to do that. So for the moment I've commented
-out the extra (NW) bit.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 2e43a9e
-IE 8/9 Web Interface moving planes
-
-Many thanks to 0xFACE for this fix. Hopefully those using Windows and
-IE8/9 should now see some moving action.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 19ce5a2
-Additional debug message printing
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 2c28d9f
-IE 8/9 Bugs in Web interface
-
-*DISCLAIMER*
-I didn't write any of this code initially, I've never tried to use it,
-and I don't understand Java Script at all. In-fact I hate the wretched
-stuff.
-
-Anyway, it appears that no-one has bothered to test any of the Web
-interface code using Microsoft Internet Explorer 8 or 9. I've attempted
-to hack out the sections of the code that are causing problems, and at
-least the web interface now seems to run.
-
-However, for some reason the planes never move - I know this must be a
-bug, but I don't know how to fix it.
-
-Most of the errors relate to trailing commas. My guess it that some
-Java engines don't mind trailing commas, but that the Microsoft ones do.
-There are also some undefined modules (untrackedDeveloperSettings) and
-functions (console.log) which I guess those who wrote the code have on
-their machines, but forgot to include in the public distribution. I've
-no idea how to fix this, so I've just hacked them out of the code.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 0430323
-Implement a remote interactive screen
-
-No changes to dump1090, (except the version number)
-
-Include a sample Linux batch start file called dump1090.sh for use when
-running dump1090 headless. This file needs to be copied to the
-/etc/init.d/ subdirectory on your raspberry pi, and marked as
-executable. Then when you re-start your RPi, dump1090 will start-up
-auto-magically and run as a sort of server to allow both local and
-remote connection to it's various internet ports.
-
-Modified the Makefile to build a new headless helper application called
-view1090
-
-Added view1090. This is an executable that allows you to connect to
-dump1090 when it is running and 'see' the interactive screen display.
-The default is to try and connect to dump1090 on IP address 127.0.0.1
-port 30005. This should work if you are running on the same RPi as
-dump1090 and using the default dump1090 port settings. However, if
-you're running on a different machine you will have to specify the IP
-address of the RPi running dump1090 using the --net-bo-ipaddr switch.
-Something like "view1090 --net-bo-ipaddr 192.168.2.65" . You may also
-have to sudo it, depending on your privilige settings.
-
-I've also compiled view1090 as a Wiin32 exe, so you should be able to
-run it under any 32 bit version of Microsoft Windows - i.e. Win95, Win
-2K, Win XP, Win 7 etc. It may work on Win 8 and 64 bit Windows, but I
-haven't tried it. The Win32 version is compiled from the same source, so
-takes all the same command line switches.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 03c16aa
-Merge pull request #10 from termigrator/patch-1
-
-Update net_io.c
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: c2962a0
-Update net_io.c
-
-Added vertical rate (a->vert_rate) to json output
-termigrator <robert1 at kaider.info>
-
-
-Commit: d9de119
-Version update
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 7ea2e8f
-Bug Fix in modesReadFromClient()
-
-The modesReadFromClient() funtion is called from modesReadFromClients(),
-which in turn is called from backgroundTasks(). backgroundTasks() is
-called from within the main processing loop.
-
-However, modesReadFromClient() can and does block. It attempts to read
-characters from the input stream, and loops whilst there was no error.
-This stalls the main RTL processing loop until an error occurs. In order
-to support simultaneous local reception (via our RTL dongle) and remote
-forwarding (data received from the interweb) we cannot allow this
-internet read to stall.
-
-To fix this, in modesReadFromClient() attempt to read a buffer of data
-(currently 0x400 bytes). If we get a full buffer of bytes, then process
-them, and attempt to read another full buffer. Keep doing thios untill
-we read only a partial buffer (less than 0x400 bytes). Process the
-partial buffer bytes and return.
-
-This allows us to occasionally process data that is arriving from the
-internet (which is buffered anyway in the TCP stack), without blocking
-local RTL dongle decoding.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 52ac50b
-Remove some local filtering
-
-Oops - Left some personal ModeA/C filtering in the release code that
-only applies if you happen to be within 25 miles of Yeovilton.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 6997715
-Split into separate module files
-
-Ok - this is likely to upset some people. Up until now, the vast
-majority of the code has been in just one file - dump1090.c. This file
-has grown so that it was approaching of 5000 lines long, and it was
-becoming unmanagable. So I've split the file into several modules,
-hopefully along fairly logical boundaries. The files are :
-
-1) dump1090.c : Basically just the main() entry function, the help
-function, the RTL dongle hardware interface, and a few orphan functions
-that don't really fit anywhere else.
-
-2) mode_s.c : This contains all the mode S / ADSB decoding functions.
-
-3) mode_ac.c : This contains all the mode A & C decoding functions
-
-4) interactive.c : This contains all the functions to maintain an
-internal list of aircraft seen over the last period, and functions to
-print them out to the local console.
-
-5) net_io.c : This contains all the network input/output functions
-allowing data to be passed in/out to/from other receivers, in formats
-such as SBS-1/3, Beast, AVR and JavaScript.
-
-Hopefully this should provide an easier way forward if/when more
-functions are added.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 1ebdd6d
-Interactive list aircraft display and delete changes
-
-Create two different Time-To-Live parameters for the interactive display
-list.
-
-1) Modes.interactive_display_ttl defines for how long the display of an
-aircraft persists after the last received message. The default is
-MODES_INTERACTIVE_DISPLAY_TTL, which is set to 60 seconds. This replaces
-the previous Modes.interactive_ttl/MODES_INTERACTIVE_TTL settings (which
-were also 60 seconds)
-
-2) Add an additional Modes.interactive_delete_ttl parameter, and
-default it to MODES_INTERACTIVE_DELETE_TTL, shich is set to 300
-seconds/5 minutes. This defines for how long an aircraft persists in the
-list structure after the last received message before being deleted.
-
-Also tidy up a few comments.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: da8151d
-Merge pull request #8 from bdavenport/master
-
-I can't pretend that I understand what you guys are up to with all this Java stuff, but since the changes to the maon dump1090.c file are minimal I'll trust you :-)
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 82b61f2
-Merge mapRefactor -> master
-
-terribl <terri at rannalla.net>
-
-
-Commit: b161004
-Merge mapRefactor -> master
-
-terribl <terri at rannalla.net>
-
-
-Commit: f53632b
-Merge branch 'mapRefactor' into masterMerge
-
-Conflicts:
- .gitignore
- public_html/gmap.html
- public_html/script.js
-
- All conflicts fixed but you are still merging.
-
- modified: .gitignore
- modified: dump1090.c
- new file: public_html/config.js
- new file: public_html/coolclock/coolclock.js
- new file: public_html/coolclock/excanvas.js
- new file: public_html/coolclock/moreskins.js
- new file: public_html/extension.js
- modified: public_html/gmap.html
- new file: public_html/options.js
- new file: public_html/planeObject.js
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 5f0e295
-From DE8MSH: Plane markers!
-Now markers look like planes! Thank You | Tak!
-
-(And bug pointed out by DE8MSH :))
-
- modified: public_html/planeObject.js
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: e91b0a6
-Added warning label when 7x00 squawk is shown.
-
-"Please don't call authorities"-warning label is show on map if any special squawk is show.
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 92d665e
-Hide Settings-windows text while page is loading.
-
- modified: public_html/gmap.html
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: 0e3426d
-"Reset Map" deselects plane correctly.
-
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: 10e3389
-Fixed resetMap() bug
-Fixed resetMap()-funtion to reset map-settings to default. Map saves last location and zoom values to localStorage.
-
-Also added new css-class '.pointer'.
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 072fba8
-Rolling back a couple changes and spawning a branch from here.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 21229d5
-The start of a crummy looking options. It is bugged right now.
-Brought back the reset map.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 5c3f6da
-Merge branch 'mapRefactor' of https://github.com/bdavenport/dump1090 into mapRefactor
-
-Conflicts:
- public_html/script.js
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 4752578
-Working on making an options window
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: fd0c116
-Tyop corrected
-
-terribl <terri at rannalla.net>
-
-
-Commit: 9904c22
-Added option to draw measurement circles around site
-Options:
-SiteCircles = true;
-SiteCirclesDistances = new Array(100,150,200);
-
-Circles are only shown if 'SiteShow' is true. SiteCirclesDistances is array of numbers. Distances are in NM or km depending 'Metric'-settings.
-
- modified: public_html/config.js
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: 3000baf
-Added metric-option to web-view
-Added option to show values in metric system.
-Metric = false; // true|false
-
-Removed unused conversion from aircraftsToJson() at dump1090.c-file.
-Tweaked distance calculation to use google map api.
-
- modified: dump1090.c
- modified: public_html/config.js
- modified: public_html/gmap.html
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: ca314fc
-Added distance to plane from site
-Just for fun. Distance is only shown if SiteShow is true in config.js-file.
-
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: 8b8f746
-Added site marker (and settings for that)
-Shows radars location on map. Default is not showing.
-
-Settings:
-SiteShow is boolean [true|false]
-SiteLat & SiteLon in decimal format.
-
-If using untrackedDeveloperSettings.js-file these settings can be
-copy-pasted on that file:
-
-SiteShow = false;
-SiteLat = 45.0;
-SiteLon = 9.0;
-
- modified: public_html/config.js
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 6cb5c2b
-Merge remote-tracking branch 'upstream/master' into mapRefactor
-
-terribl <terri at rannalla.net>
-
-
-Commit: 11d69cb
-Tweaks and Fixes
-Tweaked selected planes display so it won't push plane-table around. Added
-link to FlightStats service and speed to selected plane table.
-
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 3eb21ea
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: 498b512
-Merge branch 'mapRefactor' of https://github.com/bdavenport/dump1090 into mapRefactor
-
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: e2b552e
-Merge branch 'mapRefactor' of https://github.com/bdavenport/dump1090 into mapRefactor
-Missing semicolon;
-
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: 5cd8a09
-Merge branch 'mapRefactor' of https://github.com/bdavenport/dump1090 into mapRefactor
-
-terribl <terri at rannalla.net>
-
-
-Commit: 40c666b
-Changed table and selected planes info display
-Changed table and selected planes info to show 'n/a' when data is not present.
-
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: b5d0038
-Fixes the selection bugs
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 29d413e
-Merge pull request #9 from MalcolmRobb/master
-
-Pulling in from MalcomRobb's master updates
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: e22cff4
-Small bugs and cleaned squawkdisplay
-
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 9c465c1
-Added untrackedDeveloperSettings to this branch too.
-
-Load devel settings file after config.js and settings are saved for
-developers even after merges.
-
- modified: .gitignore
- modified: public_html/config.js
- modified: public_html/gmap.html
- modified: public_html/script.js
-
-Example file
---- untrackedDeveloperSettings.js ---
-// Load this file after config.js so these settings are used
-
-var CONST_CENTERLAT = 35.21928;
-var CONST_CENTERLON = -80.94406;
-var CONST_ZOOMLVL = 9;
---- untrackedDeveloperSettings.js END ---
-
-terribl <terri at rannalla.net>
-
-
-Commit: 242738b
-Removed 0000 squawks from table
-
-terribl <terri at rannalla.net>
-
-
-Commit: 228b770
-Move declarations into a headed file
-
-This is the start of breaking the main dump109.c file into smaller
-modules to make it a bit more maintainable.
-
-Move all the #define and structure declarations into dump1090.h
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e86eb39
-VK1ET : Numerous changes to Port handling
-
-Changes based on ideas from John VK1ET. His commit notes are as follows
-:
-
-1. Change input socket handling to avoid unnecessary memmove (use
-pointers instead)
-
-2. Add ability to read and decode binary beast format TCP.
-
-3. Change output socket handling same as sbs_output - only call output
-handler if there is a current client connected use separate ports for
-beast in and out - no need for --net-beast flag. Will input/output
-format defined by socket connected to. avr raw, beast binary and sbs can
-be handled simultaneously.
-
-4. Some comments changes, filtering of ModeAC to json,.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f64a65b
-Tidy up of UKUEHN's improvements
-
-Resolves some merge conflicts that I couldn't find a way to fix during
-the previous merge.
-
-Remove a few Tabs that escaped in the edit/merge
-
-Rename the fix_errors flag variable to nFix_crc since it now represents
-the number of crc errors to attempt to fix.
-
-Remove the aggressive variable since it's now part of nFix_crc
-
-Only print phase correction statistics when phase correction is enabled.
-
-Add an additional Modes.stat_ph_bit_fix[] to count the bits fixed during
-phase correction
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 9edba93
-UKUEHN : Various Improvements
-
-Sorry Ulrich - I can't get Github to resolve the merge errors and
-preserve your commit notes, so I'll add them here.
-Improvements on bit error correction, doc update, preparation for
-program installation/package build
-
-Hi,
-I committed some further improvements on the bit error correction code,
-updated the readme, and implemented a way to install the program in the
-linux file system hierarchy (allows for package building).
-
-Regards,
-Ulrich
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: ee742cf
-SBS Output Format changes
-
-Bug fixes in the SBS output code as a result of an EMAIL from Liviu
-
-Some software gets upset if null fields are output where the software is
-expecting a valid value. This was being caused by DF0's outputting and
-SBS MSG5. MSG5 needs Atert and SPI flags, which are derived from the FS
-field. DF0 doesn't have an FS field, so cannot output a MSG5. Change so
-that DF0 results in an SBS MSG7.
-
-Also DF17/DF18 metypes 5 to 18 contain raw Lat/Lon data. However they
-cannot be decoded into real Lat/Lon values unless both even and odd
-parts are available Therefore, when we receive a DF17/DF18 we need to
-check that we have successfully decoded the Lat/Lon before we attempt to
-send an SBS MSG2 or MSG3. If we don't have a decoded Lat/Lon, send a
-MSG7 instead.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 4c0ed6d
-Set AOG_VALID for DF-17/18 metype 19
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 77bd1f4
-Include Vertical rate in aircraft structure
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8b5c74d
-Split into multiple JS files,
-Selecting planes now works,
-Started work on settings window,
-Created extension.js, an area for new ideas to be tested or loaded out of.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: b0e0f96
-Merge pull request #8 from MalcolmRobb/master
-
-Pulling in from MalcomRobb's Master
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: e0c752b
-Merge branch 'master' of https://github.com/terribl/dump1090
-
-terribl <terri at rannalla.net>
-
-
-Commit: 1436062
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: e309025
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: 6bf2f2b
-Added global settings and untrackedDeveloperSettings.js-file.
-
-untrackedDeveloperSettings.js
-Create file and add line `var developerSettings = true;` on top of it.
-After that some settings can be overwritten with deleloper's flavour.
-
--- Example File w/o line numbers --
-var developerSettings = true;
-
-var CONST_CENTERLAT = 60.0; // 45.0
-var CONST_CENTERLON = 20.0; // 9.0
-var CONST_ZOOMLVL = 6; //5
--- End of Example File --
-
- modified: .gitignore
- modified: public_html/gmap.html
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: d2a1565
-Couple more small tweaks to the tails of planes.
-Added "CoolClock" both local and GMT to the info pane, http://randomibis.com/coolclock/
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: e50c2a5
-Phase Enhancement changes
-
-Phase enhancement is used to try and increase the signal amplitude when
-Nyquist sample aliasing is suspected. In previous versions, this was
-enabled by default. In this version, the default is off. There is now an
-additional command line switch --phase-enhance to turn it on.
-
-There are also additional debug statistics which count the number of
-phase demodulation failures in for both uncorrected and phase corrected
-passes.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: b481c76
-mm structure initialisation
-
-Ideally we should clear down the mm structure every loop of our
-ModeA/C/S bit detector. However, we're getting 2Mbits of data per
-second, and the structure is several tens of bytes long. Clearing down
-every loop would require us to zero up to 100Mb per second. The memset
-function may be fast, but it's still going to take up valuable processor
-time.
-
-So instead of clearing the whole structure every loop, just clear the
-important parts.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 2c7c1a4
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: b542488
-Updated a copy/paste error, where I did not update the paste.
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: caf413c
-Working on adding paths to the planes.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 3117b1c
-Merge pull request #6 from terribl/master
-
-resetMap()
-
-Did I manage to do this right? Let's try.
-Terhi <terri at rannalla.net>
-
-
-Commit: f853550
-Fixing resetMap()-bug.
-
-terribl <terri at rannalla.net>
-
-
-Commit: 4a3113f
-Decode DF-18
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 08ffc3f
-Change mm.crc checks to mm.correctedbits
-
-Instead of force clearing mm.crc to zero if we successfully correct bit
-errors, just use the mm.correctedbits variable. This allows us to print
-out the crc value containing the errors during list output modes.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: c43c922
-Making the inital checkin to the refactored map page.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 05c9ebb
-Merge pull request #3 from terribl/master
-
-New settings div
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: a1d4a9f
-Merge branch 'settings'
-
-terribl <terri at rannalla.net>
-
-
-Commit: be6cb6e
-VK1ET : Use error corrected DF17
-
-Actually use the (DF17) messages where we do bit correction.
-
-Other changes to AVR message I/O.
-1) treat mlat timestamp of zero as invalid (easier to work with than
-(-1) and equally unlikely).
-2) If we don't have a valid timestamp send a without timestamp
-'*.......' message rather than '@.......' with invalid time.
-3) Drop interpretation of obsolete AVR ' #' & '$' formats - they
-wouldn't have worked anyway (wrong length).
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e33591d
-VK1ET : Check Bit Correction against ICAO cache
-
-If we error correct a DF17 frame, check that the ICAOaddr exists in our
-recently seen ICAO cache. This reduces the likelyhood of birthday
-paradox solutions producing false ICAO addresses
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 542b94d
-VK1ET : Changes to fixBitErrors()
-
-1) Reduce complexity of fixBitErrors()
-2) Inline flipBits()
-3) Remove validation checks that can never occur.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d7df2ad
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: 0a0ba16
-VK1ET : Changes to modesInitError()
-
-Restrict Syndromes to exclude DF bits. Do NOT introduce syndromes for
-errors in the first 5 bits (DF field)
-
-Use the --aggressive flag to see if we populate the two-bit error
-syndromes. If --aggressive is not specified, then we don't attempt to
-fix two bit errors.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 0dfc083
-New settings area
-New settings area can be opened by clicking Settings-link and closed by same link or OK-button. No settings to change yet.
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 640d63a
-VK1ET: Shorten CRC calculation
-
-We don't need to include the CRC itself one bit at a time. This shortens
-the loop count by 24 iterations, so should be much faster
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f33a709
-VK1ET : Better pthread termination
-
-Close threads, mutex and conditions using pthread functions
-
-Also, correct/update a few comments.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 92fd06b
-VK1ET : Bugfix in Error correction table
-
-vk1etI believe there is an error in the way the CRC error syndromes are
-being created in the two bit case. The inner loop was introducing an
-extra error bit each time through rather than moving it. Below is the
-modified code fragment for syndrome creation collapsedSun 07:26
-19 May 2013 07:26vk1et [notifications at github.com]Actions
-To:Mantirez/dump1090 [dump1090 at noreply.github.com]Cc:MMalcolmRobb
-[Support at ATTAvionics.com]
-
-To help protect your privacy, some content in this message has been
-blocked. If you're sure this message is from a trusted sender and you
-want to re-enable the blocked features, click here.
-Bugfix first noted by VK1ET, and posted here :
-https://github.com/antirez/dump1090/pull/23#issuecomment-18113094
-
-I believe there is an error in the way the CRC error syndromes are being
-created in the two bit case. The inner loop was introducing an extra
-error bit each time through rather than moving it.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: bd39479
-Merge pull request #6 from bdavenport/tablesort
-
-Table sort & bit cleaner look with larger tables on smaller screens
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 0ee5cdb
-Fixed a bug on Settings-link placement
-
-terribl <terri at rannalla.net>
-
-
-Commit: 2d1325f
-Changing info_footer to info_settings.
-
-Location from footer to top right hand corner.
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 8e23983
-Merge pull request #1 from terribl/master
-
-Added link to FlightStats-service
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 9e8c105
-Added link to FlightStats for flights with flight number.
-
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: e1a0665
-Added terribl's suggestion.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: 4dc9271
-Adds a bit of sorting to the table by clicking column headers
-Also made the design work for lower resolution monitors, especially when the list has 20+ planes.
-
-Brian Davenport <the.lost.minded at gmail.com>
-
-
-Commit: eac2a90
-Version update
-
-Version update for terribl and bdavenport's combined changes
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 7cff495
-Merge pull request #3 from terribl/master
-
-Web client
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: 7b99ad5
-Few bugs
-
-terribl <terri at rannalla.net>
-
-
-Commit: 72142fa
-Combined effort and code from bdavenport and me.
-
-Added quite a lot of new things this time - see modified files or just
-be brave and try :)
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 9ea6f3e
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: df4a24b
-Version update for Ulrich
-
-Updated the version number for Ulrich's code
-
-Replaced some Tabs with spaces
-
-Forward declaration of the fixBitErrors() function required for M$ VC
-6.0 to suppress warning messages.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e0bc0ba
-Merge pull request #4 from ukuehn/master
-
-Bit error correction code improved
-MalcolmRobb <Support at ATTAvionics.com>
-
-
-Commit: feab602
-Call new error correction code. Instead of bit positions record no. of corrected bits.
-
-Ulrich Kuehn <ukuehn at acm.org>
-
-
-Commit: 6d5d7a4
-Test code for new bit error correction plus timing. This code is run when debugging.
-
-Ulrich Kuehn <ukuehn at acm.org>
-
-
-Commit: 0a4fc6e
-Added code for table based correction of bit errors. Code is not called yet except initialisation.
-
-Ulrich Kuehn <ukuehn at acm.org>
-
-
-Commit: ae69cd5
-Web view JavaScript modifications.
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: 6f228b9
-Upstream merge finalized
-
-terribl <terri at rannalla.net>
-
-
-Commit: cac715e
-Upstream merge conflicts resolved
-
-terribl <terri at rannalla.net>
-
-
-Commit: 78f565c
-Really minor tweaks
-
-terribl <terri at rannalla.net>
-
-
-Commit: f56679a
-VK1ET : Bugfix pTimestamp printf()
-
-Change the type of pTimestamp from char* to unsigned char* to stop sign
-extension messing up the printf("%02X,pTimestamp stuff
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8feabda
-BDAVENPORT : Adds a Table
-
-Implement improvements to the public_html stuff as supplied by
-bdavenport.
-No changes to the C code.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e65e873
-Added flags to json for valid position and heading
-As MalcolmRobb suggested.
-
- modified: dump1090.c
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: ebadf90
-Merge remote-tracking branch 'upstream/master'
-
-terribl <terri at rannalla.net>
-
-
-Commit: c83d404
-Update of some comments, Version and release
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e6080e2
-Some map view changes
-
- modified: public_html/gmap.html
- modified: public_html/script.js
- modified: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: d046906
-Update ModeA/C to ModeS
-
-Update the ModeA/C to Mode S comparison routine to use bFlags.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: bf4ccac
-bdavenports .diff-file
-
-terribl <terri at rannalla.net>
-
-
-Commit: 6427fcc
-VK1ET : --Interactive display changes
-
-Based on a submission by VK1ET, but I've tweaked it a bit to use the
-bFlags.
-
-Basically, only print out values in --interactive that have been
-received from the aircraft. Previous versions would display 0.000 for
-lat and long for any positionless aircraft. This version prints blanks
-instead for any/all fields that are not yet known.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: cd86d58
-Major Rewrite of SBS output code
-
-Remove dependency of the SBS output code on the historic (a) aircraft
-structure. The only items that were required were the decoded aircraft
-Lat/Lon and these are now included in the mm structure.
-
-Rewrite the SBS output code to use mm->bFlags when populating the output
-fields. This ensures that all available data is output, and also that no
-stale data is sent.
-
-Using the mm->bFlags variable for SBS output means there is no further
-requirement for the sbsFlags member in the aircraft structure, so remove
-it.
-
-Cross your fingers and hope this hasn't introduced too many bugs !
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 7df6d65
-Implement additional Decoding and Tidy
-
-Implement additional bFlags to validate AircraftOnGround, and FS.
-
-Decode Aircraft On Ground from DF0, DF4, DF5, DF16, DF20, and DF21 where
-possible.
-Flag FS as valid for DF4, DF5, DF20, DF21,
-
-Remove dr and um from the mm structure. They're only used in console
-list output mode, so decode them there if required.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 60aa63b
-Merge remote-tracking branch 'origin/master' into Debug
-
-Conflicts:
- dump1090.c
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f59e82a
-fix .gitignore file
-
-terribl <terri at rannalla.net>
-
-
-Commit: 914923f
-Fix terribl's commit for Microsoft C
-
-Microsoft Visual C 6.0 doesn't support inline declaration of variables.
-
-Also, need to update the version number.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: c5fdde6
-Added resetMap()-function to web-view.
-
-+ some small tweaks.
-
- modified: dump1090.c
- modified: public_html/script.js
-
-terribl <terri at rannalla.net>
-
-
-Commit: 735429b
-Additional bFlags for Lat/Lon decoding
-
-Additional flags in the bFlags variables for even and odd CPR lat/lon
-updates.
-
-Change the interactiveReceiveData function to use the bFlags when
-updating the aircraft (a) structure from the newly received (mm) message
-structure. This should hopefully be faster than basically re-decoding
-the DF, type and subtypes all over again.
-
-If we decode the lat/lon into the aircraft (a) structure, back populate
-it into the message (mm) structure. This allows us to print a decoded
-Lat/Lon in the decoded message list output.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f011f07
-Tidy up ModeA/C mm and a structure
-
-If --modeac is specified, then the program will be building an aircraft
-list. Calculate the altitude when we create the aircraft structure (a) ,
-and then back copy it into the mm structure. This avoids us having to do
-a second ModeAtoModeC conversion in the list output display.
-
-Also - bug fix in the ns_vel calculation.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 6968bf9
-Splitted gmap.html to multiple files in new 'public_html'-directory.
-
-Changes to 'dump1090.c'-file made accordingly.
-
- modified: .gitignore
- modified: dump1090.c
- deleted: gmap.html
- new file: public_html/gmap.html
- new file: public_html/script.js
- new file: public_html/style.css
-
-terribl <terri at rannalla.net>
-
-
-Commit: fc7d1e2
-Complete the bFlags decoding
-
-Update the bFlags structure member to indicate which other structure
-members contain decoded values.
-
-Also, trim out mm structure members that are simple bitwise ands from
-the raw data, unless the results are used in lots of places whereby
-decoding them once is more efficient.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: a3d62f9
-VK1ET : More Decoding of DF-17 ground reports
-
-Extend the DF-17 CPR decoding to use User Lat/Lon for ground positions.
-
-Also start implementing a bFlags structure variable to indicate which
-fields in the mm and a data structures contain valid values.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: cc464b0
-User Lat/Lon setting
-
-Based on initial code supplied by VK1ET
-
-Allow the user to specify their receivers (technically their aerials)
-physical location. This is required for decoding ground positions, and
-also for uploading aircraft data to various sharer sites.
-
-The position can be hardwired by setting the MODES_USER_LATITUDE_DFLT
-and MODES_USER_LONGITUDE_DFLT constants before compilation, or entered
-at runtime via the new command line switches --lat and --lon. Either
-way, the values are checked for validity before use.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 5f009a3
-VK1ET ; Decode DF-17 ground position reports
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 6b53c9e
-Move the clearing of mm for modeA/C
-
-Only clear mm after we are sure we have got a Mode A/C. This reduces
-processor load.
-
-Also tidy up some Linux compiler warnings that result from the last
-change.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8048cbe
-Better decoding of DF-17 Airborne Velocity
-
-Based on a submission by VK1ET. Fully decode DF-17, metype 19. Take care
-to only update fields that are valid in the data.
-
-Also, initialise (to zero) the mm structures before use
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 6af4bb7
-VK1ET : Only Decode valid AC12 and AC13 altitudes
-
-Decode DF17 altitudes only if valid (i.e. must be a non-zero field)
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8efe649
-Tidy up some comments and initialisation
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: dd72fc6
-VK1ET : Allow stats in --interactive mode
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: fb5ef77
-VK1ET : Fix AC12 Altitude decoding
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 71ace95
-Additional Timestamps for Lat Lon
-
-1) Implement additional timestamps to remember when a new Lat/Lon value
-is generated.
-
-2) Increase callsign[] character array to 16 chars to make it long word
-aligned.
-
-3) Change some more comments from /* to //
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: ed076d0
-Change initialisation of structures
-
-Use memset to clear entire structures at initial creation to zero, and
-then populate values that should not be zero. Do this rather than
-individually clear each structure member to zero.
-
-This should be faster, plus it's safer when new structure members are
-added because you don't have to remember to initialise them.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8870de2
-Update --interactive with DF20/21 callsigns
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 5457c5b
-Tidy DF17 print output routine
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 36778f1
-Extract callsign from DF20 and DF21
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 14c5459
-Improve callsign extraction from DF17
-
-Use 32 bit registers to hold multiple characters and shift them. This
-removes the need for multiple memory reads.
-
-Also tidy up the DF-17 extraction routine to make it more readable.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 539faaa
-Rename Gillham conversion function
-
-ICAO documents refer to AC13 for altitude encoding and ID13 for squawk
-wncoding. Rename decodeGillhamField to decodeID13Field to better
-represent this.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 9783b47
-Generate an average Signal Strength
-
-Remember the last 8 signal strengths for each aircraft and average them
-for --interactive display. This produces a less jittery indication.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: a296f27
-Make stats gathering conditional on Modes.stats
-
-There is a quite complex if/else construct for gathering statistics
-inside the main decodeModeS loop. To speed the loop up when not
-gathering statistics, make the whole construct conditional on Modes.stat
-being set.
-
-Also tidy up a few comments
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 2e21367
-Calculate DF and size in decodeModeMessage
-
-Allow the decodeModeMessage function to re-calculate msgtype and
-msgbits. This makes the code a bit more portable by not requiring the
-calling function to fill in these fields before the call.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: c81498a
-Improve DF field error correction speed
-
-Use bitmasks to speed up the detection of valid and invalid ICAO DF
-field types.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8d65abd
-Sanity Check on msglen after decoding
-
-Add a sanity check to ensure that msglen is consistent with the DF type.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 5f7ed42
-VK1ET : Ctrl/C and other cleanup code
-
-Changes supplied by John VK1ET.
-
-This tidies up the thread termination, which then allows for use of [a
-trapped] Ctrl/C to cleanly terminate the program and dump stats if flag
-set.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 50cedd7
-Major re-write of decodeModesMessage
-
-Lots of changes to the decodeModesMessages() function, and associated
-helper functions, with the aim of speeding the code up by reducing the
-number of calls to the CRC functions. Also, only update the mm variables
-which are part of the message we're decoding.
-
-Change the way CRC's are generated and checked.
-Change the way single and double bit error is implemented.
-General tidy up of the function to make it more readable.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e9b463d
-Update displayModesMessage()
-
-Update displayModesMessage() to show additional ICAO defined DF types.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 19c1150
-Mode S Gillham altitude changes
-
-Modify all the Mode=S Gillham altitude decoding to use a new function
-decodeGillhamField()
-
-Change the Mode-S signal strength so that it rounds to the nearest
-integer
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e161b76
-DF Error detection and Correction
-
-Added additional error detection and correction to the DF field of the
-first byte in every ModeS frame.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 7cf7958
-Change the message length decision
-
-Assume that DF0-DF15 are all short 56 bit messages
-Assume that DF16-DF31 are all long 112 bit messages
-
-This helps us error detect and error recover for bits in the first byte
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 748f2f5
-Adjust --interactive display
-
-Allow 8 character Longitudes to cope with -179.999
-
-Change the type of signalLevel to unsigned chae. Negative signal levels
-make no sense.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8ed0574
-Implement 100 ft Altitudes
-
-The DF's for altitude include a Q bit to distinguish either 100ft or
-25ft altitude encoding. This version implements the 100ft increments
-used by older aircraft. These codes are basically ModeC altitudes
-transmitted over ModeS.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 05187f7
-Add items to --interactive display
-
-Reformat the --interactive display to show more information
-
-Add a "Mode" column. This displays the The primary message type "S" or
-"A" plus any matching modes "a" and/or "c". Requires --modeac switch.
-
-Add a "Sig" column to show the signal strength.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 4d370bd
-Change default for error correction to OFF
-
-Add a --fix command line switch to enable error correction using CRC.
-Change the default to OFF/Disabled.
-
-Error correction can very occasionally result in an incorrect solution
-to the crc equation. It also takes significant CPU work for very few
-corrected results. Therefore, the default has been changed to OFF, but
-you can re-enable it if you wish by using the --fix command line switch.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f77a85e
-VK1ET : Additions to check fflags
-
-Implement changes suggested by John/VK1ET
-
-Changes to cprNFunction to ensure fflag {was 'isodd'} is used as a flag.
-Fix to decodeCPRrelative to pass 'surface' flag.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 2acb094
-Changes to Mode A/C/S matchup code
-
-Try to improve the matching of ModeA/C codes to Known Mode-S
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 25f92e5
-Change Squawk/ModeA code
-
-The original code stores the squawk as a decimal (base 10) value. Change
-this to a hex value to reduce the amount of maths required to convert
-the input binary value..
-
-Rename all the variables used to store the squawk to "modeA", rather
-than variously identity, squawk and modeA.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f9c1dc1
-Remove duplicate varbles
-
-Several variables within structures contain the same information in
-different forms.
-
-The aircraft structure contains addr and hexaddr. Hexaddr is a printable
-string version of addr. However, hexaddr is only ever used in printf
-statments, so we can use printf(%06x) to print addr. This saves a printf
-for every received command.
-
-The modesMessage structure contains addr, and aa1,aa2,aa3 as separate
-bytes. aa1,aa2 and aa3 are only ever used to construct addr, and to
-print out. Therefore, we can use addr instead of them..
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 3766492
-Change Mode-A/C to Mode-S detection
-
-The original code made an attempt to reconcile a newly arrived ModeA/C
-message with every known Mode-S report at the time of detection.
-However, the results of matching up Modes A/C and S are only used in the
-interactive display routine, and that is only called periodically from
-within the BackgroundTasks loop.
-
-Doing the matching on every ModeA/C arrival incurs quite a large CPU
-processing load. Moving the matching up routine to the backgroundTasks
-loop means that the task is performed muck less frequently and therefore
-uses less CPU time.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 3dbc0ef
-VK1ET : Decode mode ASCII hex input message types
-
-Modifications entirely base on code supplied by John VK1ET.
-
-Supports additional AVR raw ASCII input message stream types
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: a04e399
-VK1ET : Implement Relative CPR decoding
-
-Modifications entirely base on code supplied by John VK1ET.
-
-Implements relative CPR Lat/Long decoding for --interactive display
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: b78b606
-Improvements to Mode A/C display
-
-Allow a greater range and negative values for Mode C (down to -1200
-feet)
-
-Stop attempting to feed ModeA/C data to SBS Output stream.
-
-Allow Mode A only matches to Mode-S squawks when the Mode A code does
-not conflict with any possible (legal) Mode C code.
-
-Allow Mode C matches to track aircraft climbing and descending
-relatively slowly. This also helps when trying to match Mode-S altitudes
-which are 25 foot increments, with Mode C altitudes which are in 100
-foot increments.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d63ac81
-Updated comments, ,no code changes
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 9fff65b
-Implement Mode A/C decoding
-
-First attempt at decoding legacy SSR Modes A and C.
-
-If the command line switch --modeac is used, the program will now
-attempt to recover Mode A/C signals contained in the raw I/Q data
-stream. The current recovery mechanism is quite strict and does not cope
-well with overlapping and corrupt SSR replies. I estimate that less than
-20% of possible returns are decoded correctly. Hopefully over the next
-few iterations this can be improved.
-
-If outputting raw data it is recommended to use the --net-ro-size and
---net-ro-rate command line options to reduce the number of very small
-ethernet packets that will be generated by mode A/C replies.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 39cb96f
-Fix several bugs in input/output fromat
-
-Thanks to vk1et for these.
-
-1) Correct for additional timestamp langth in raw output buffer when
-using mlat mode
-
-2) Don't output a timestamp when the message has been received from a
-remote site (the internet). This is to avoid upsetting MLAT because
-there is an indeterminate delay between reception at the remote site and
-subsequent message arrival in the local dump1090 instance.
-
-3) Allow @ character for raw data input with timestamp, and correctly
-calculate the length.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 1126508
-Fix Bug in Beast Mode Output
-
-Original code put the signal strength in before the timestamp. It should
-be after.
-
-Also add some code to support MODE A/C output at a future date.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e987281
-Bug fix in vertical sign
-
-Incorrect shift amount when detecting vertical rate sign. Thanks
-John-vk1et.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 3d25f4b
-Changes to prevent stale output in SBS-1 format
-
-The original code calculates Lat/Long only if it receives two DF-17
-(subtype 9 or 18) within one second of each other. I have no idea why.
-It then caches the results in the aircrafts data structure for use in
-the --interactive display.
-
-When SBS-1 style ASCII output is selected (port 30003) the code does not
-attempt to calculate Lat/Long from the data just received - instead it
-picks it up from the cached information in the aircraft's data
-structure.
-
-However, if the data isn't being updated this results in stale Lat/Long
-being sent out. This is most likely to occur when the aircraft is at the
-extreme edge of the receivers range when it may be getting some DF-17s
-containing Lat/Long, but not 2 per second. The program will continue
-sending the stale data until the aircraft finally times out (default 60
-seconds)
-
-I have modified the code to include a sbsflags variable in the aircraft
-data structure. When a new Lat/Long is decoded and put into the
-structure, a bit is set to indicate SBS_LAT_LONG_FRESH. Then, once the
-Lat/Long is output the first time, the bit is cleared. Thereafter the
-code will not populate the Lat/Long fields in the output message until
-SBS_LAT_LONG_FRESH is set again.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: bbcf68c
-Nunojpg Southern Hemisphere bug fix + 1
-
-1) Incorporate nunojpg southern hemisphere bug fix
-2) Initialise Modes.stat_DF_Corrected variable
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: a75442d
-Up issue the version and commit
-
-Version 1.01.1503.13
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 2431dc0
-Added --net-ro-rate command line switch
-
-The default is 0. This works in conjunction with --net-ro-size.
-
-The program will attempt to gather up "net-ro-size" raw bytes before
-sending them out over Ethernet. However, to avoid a long wait if the
-traffic density is very low, the program will only wait for
-"net-ro-rate" 64mS periods since the last send. before sending any data
-added to the output buffer since the last send. This allows the user to
-tailor the network load to suit their requirements.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 7779ef4
-Correct CRLF order in SBS-1 ASCII output
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: b15ae2a
-Print DF-11 II/SI
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 96afd52
-Speed up Squawk Decode
-
-Re-write to avoid multiple reads of the same memory variable.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 6619d21
-Speed up Error Correction
-
-Move memcopy to outside the main bit loop, and just flip the modified
-bit back at the end of each loop if it didn;t work
-
-Pass in a pointer to the mm structure being corrected, and fix-up the
-crc with the value inside the function, rather than re-calculate on
-return
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: bdf985a
-Don't attempt to error correct DF-11
-
-Don't attempt to error correct DF-11, because we can't be sure that the
-checksum/crc is supposed to be 0.
-
-Also a few typo's corrected
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: bb20d0b
-SBS-1 ASCII output changes suggested by JungleJet
-
-1) Populate Field 3 witn "111"
-2) Populate field 4 with "11111"
-3 Populate Field 6 with "111111"
-4) End the record with <CRLF>, rather than just <LF>
-5) Increase the ctrCommon buffer size to cope with additional field data
-
-Apparently, this makes the output more compatible with Plane Plotter and
-RTL1090.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 249c11a
-Add --net-ro-size command line switch
-
-Allow the user to specify the minimum size of raw data to be sent to the
-TCP port. Dump1090 will buffer up raw data until it has at least this
-many bytes to send to the TCP socket.
-
-The default is 0, which means every frame is sent to the TCP socket as
-it is decoded. The maximum value is limited to 1300 bytes.
-
-Note the buffer will be flushed every 65 ms regardless of the amount of
-data in it so that excessive in transmission do not occur.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 0263793
-Add version number to help output screen
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 444b1cf
-Changed the date separator in SBS-1
-
-Changed the separator from \ to /
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 09d72d2
-Merge JungleJet Updates
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d96f3a6
-Added Raw Output Buffering
-
-The original code wrote every individual received frame to the TCP port.
-Some O/S's buffer smaller writes into larger packets. It appears that
-some versions of Linux don't. The result is that the (Ethernet) network
-gets bombarded with lots of small Ethernet packets.
-
-Therefore, I've added a 1500 byte output buffer to the raw output
-functions. Data is written into this buffer by the raw output routines.
-
-Data is flushed out to the TCP port when either.
-1) The latest write to the output buffer takes the contents to more than
-1300 bytes
-2) At the end of every processed block of data supplied by rtl-sdr. This
-will be every 56mS or so,
-
-The end result should be that on systems detecting a lot of traffic, you
-should see lots of > 1300-byte Ethernet packets. On systems receiving
-less traffic, you should see one network packet every 56 mS or so.
-
-The total number of network packets should be much reduced, and their
-average size much bigger. The worst case delay in transmission will be
-56 mS.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 1324e28
-Add Timestamps to SBS-1 format output
-
-As requested by mlino
-
-Note : I haven't been able to validate that the format is correct. I
-think it should be Ok, but it needs someone with an SBS setup to check
-it. Any offers?
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 1175a03
-Another attempt to remove UNIX compiler warnings
-
-M$ VC 6.0 does not like long long
-UNIX compilers don't like printing int64_t or uint64_t as %lld
-Raspberry Pi Linux doesn;t like PRId64
-
-So I give up.
-
-I've changed the affected variables to bog standard unsigned ints.
-Assuming these compile as 32 bit unsigned's, its unlikely youll have the
-program running long enough for these to overflow.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8c024d1
-Try to correct single bit errors in the DF field
-
-If noist/sampling/Nyquist errors cause bit detection errors in the DF
-pare of the frame, then we may not be able to work out the correct
-length of the message. We have to guess whether the bit should be a 0 or
-a 1.
-
-In such circumstances we assume the message length is long(112 bits)
-However, if we start to get encoding errors after bit 56 the we attempt
-to change our original guess at the bit, and invert it. If this change
-of guess would have resulted in a short message, and if the short
-message would have been error free then we can recover.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 0c91c5f
-Merge pull request #1 from junglejet/Debug
-
-Debug
-junglejet <gk at jetvision.de>
-
-
-Commit: 44ca030
-committ repeated
-
-committ repeated
-
-junglejet <lacaleta020 at gmail.com>
-
-
-Commit: c495670
---mlat option and --interactive-rtl1090 option added
-
---mlat option introduced: to display raw data in Beast ascii format with
-counter (@...;), does not affect Beast binary format ;
---interactive-rtl1090 option introduced: order of flight table Iin
-interactive mode) and some formats adopted to RTL1090 format, so
-comparison is easier
-
-junglejet <lacaleta020 at gmail.com>
-
-
-Commit: 6362235
-Change the message bit decoder
-
-Change (and hopefully improve) the Message bit decoder.
-
-When decoding bits, a "0" is encoded as (m[j]<m[j+1]), and a "1" is
-(m[j]>m[j+1]) . However, there is a problem if mpj[ == m[j+1] because we
-can't decide what it's supposed to be.
-
-Antirez's original code defaults to a '1', and then lets the bit error
-detection code sort it out. I *think* it's better to default to '0'
-because it's more likely that noise added to the signal will produce a
-spurious '1' rathar than anything subtracting from the signal to produce
-a spurious '0'
-
-Also, Antirez''s code only looks for errors in the first bit of the
-message. I don't know why this is.
-
-There is a potential problem in deciding the message length if there are
-any errors in the first 5 bits decoded, because this defines the message
-type (the DF-??), and it's the DF that determines how many bits the
-message shall contain.
-
-If there is an error in the first 5 bits, then we could ignore the DF,
-and continue decoding a long format (112 bits). However, for weak
-signals, if the message is a short one (56 bits) this results in the
-sigStrength decaying to the point where it's level drops below squelch,
-so we discard a possibly decodeable 56bit
-
-However, if we assume it's a short message, and only decode 56 bits, and
-it's really a long message we won't have decoded all the bits.
-
-Not sure what to do about this
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: ff697db
-Improve the decoding for DF-11
-
-Three changes in this one
-
-1) Change the checksum testing for DF-11
-2) Recode the Checksum generation routine to use pointers.
-3) Tidy up the appearance of some print debug statments
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: dc7e2b6
-Change the type of the stats variables from uint64_t to int64_t
-
-Some compilers complain about the printf %llx format being used with a
-uint64_t
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 22c3298
-Change the I/Q lookup table values for better detection
-
-Change the I/Q lookup table for better detection. Changes fully
-described in the source dump1090.c at line 347 onwards. This change
-results in about 30% more frames being detected at weak signal input
-levels.
-
-Also a bug fix from the last commit - C doesn't support the min()
-function.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f806f18
-Basic tidy up of the modesInit() function
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: f1935b2
-Get rid of that hideous goto
-
-I'm not overly keen on the continues either :-)
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: e59142b
-Merge the data bit detection and data byte assembly into the same loop
-
-Original code loops through the analogue array m[] detecting data bits
-and putting them into the bits[] array. It then loops through all the
-bits[] creating the msg[] byte array. It then loops through the analogue
-array m[] again calculating the signal strength.
-
-Change this so that everything is done in one loop so we can go straight
-from analogue samples to bytes, calculating the signal strength on the
-fly.
-
-Also use the results of the signal strength calculation to populate the
-message records mm.signalLevel variable.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d85939c
-Create a payload pointer in message detector loop
-
-Create a pointer, pPayload, which points to the start of the data bits
-in the analogue sample buffer m[]. So pPayload =
-&m[j+MODES_PREAMBLE_SAMPLES] Then use this
-pointer to perform the data bit detection tests. It should save a few
-cpu cycles per test because accessing pPayload[2] should be quicker than
-m[2+j+MODES_PREAMBLE_SAMPLES].
-
-Also change the way phase correction works. the original code saves the
-original data (from m[pPayload] to aux[], and then phase corrects m[],
-and then restores aux[] back to m[] afterwards. Change this so that m[]
-is copied to aux[] and then phase correction is carried out in aux[],
-and the pPayload pointer points to aux[]. This then avoids the
-requirement to copy aux[] back to m[] afterwards, which saves a fair few
-CPU cycles.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 09af545
-Create a preamble pointer in the message detector loop
-
-Create a preamble pointer in the message detector loop
-
-Create a pointer, pPreamble, which points to the start of the preamble
-in the analogue sample buffer m[]. So pPreamble = &m[p] Then use this
-pointer to perform the preamble detection tests. It should save a few
-cpu cycles per test because accessing pPointer[2] should be quicker than
-m[p+2].
-
-Also move the decision on whether to try OutOfPhase correction to the
-end of the first pass, rather than automatically going into phase
-correction if the first pass fails. This saves two memcpy's if the
-decision in the second pass is to not do phase correction.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 70031e1
-Create a preamble pointer in the message detector loop
-
-Create a pointer, pPreamble, which points to the start of the preamble
-in the analogue sample buffer m[]. So pPreamble = &m[p] Then use this
-pointer to perform the preamble detection tests. It should save a few
-cpu cycles per test because accessing pPointer[2] should be quicker than
-m[p+2].
-
-Also move the decision on whether to try OutOfPhase correction to the
-end of the first pass, rather than automatically going into phase
-correction if the first pass fails. This saves two memcpy's if the
-decision in the second pass is to not do phase correction.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 316b456
-Make Things more Windows friendly
-
-Change the following so that M$ compilers and debuggers complain less
-
-1) change all long long data types to uint64_t.
-2) Typecast all malloc function returns to the correct pointer types.
-3) Explicitly typecast all float to int conversions.
-4) Remove inline variable declaration. Allowed in C++, but not in C.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: ff34693
-Make Things more Windows friendly
-
-Change the following so that M$ compilers and debuggers complain less
-
-1) change all long long data types to uint64_t.
-2) Typecast all malloc function returns to the correct pointer types.
-3) Explicitly typecast all float to int conversions.
-4) Remove inline variable declaration. Allowed in C++, but not in C.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d02a404
-Merge remote-tracking branch 'origin/master' into Debug
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 4f7b51a
-Change timer granularity & incorporate terribl's latest changes
-
-Apparently, the Beast output timestamp has a frequency of 12 Mhz.
-Therefore, I've updated the timestamp counter to simulate a 12 Mhz
-frequency.
-
-Also incorporate terribls latest updates
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 408c846
-Merge remote-tracking branch 'origin/master' into Debug
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: ed80552
-Speed up the I/Q to magnitude calculation
-
-Increase the speed of the I/Q to magnitude calculation lookup by
-expanding the table to 65536 entries (256*256*2 bytes). At runtime, this
-allows us to pick up raw I/Q bytes as a 16 bit value and index into the
-magnitude table to get a 16 bit result. This removes the need for
-subtracting 127, and then correcting for -ve numbers, so should be
-faster, at the expense of a larger data table.
-
-Change the maglut lookup table from 129*129 to 256*256
-Initialise the maglut buffer accordingly
-Change the data->maglut lookup to use the new maglut buffer
-Change the I/Q data buffer pointet to a uint16_t *
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: bbe96b6
-Merge remote-tracking branch 'origin/master' into Debug
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 3113223
-One bug fix, and some changes to the --interactive output format
-
-I messed up merging the Squawk display in interactive mode into my
-master.
-
-However, the original source posted by terribl causes a print line
-length greater than 80 characters. This in turn causes the lines to
-spill over on a terminal display. I have therefore re-formatted some of
-the output so that it fits within 80 characters.
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 8ba18eb
-Type Conversion required when using --file
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 192cb80
-Speed up the I/Q to magnitude calculation
-
-Increase the speed of the I/Q to magnitude calculation lookup by
-expanding the table to 65536 entries (256*256*2 bytes). At runtime, this
-allows us to pick up raw I/Q bytes as a 16 bit value and index into the
-magnitude table to get a 16 bit result. This removes the need for
-subtracting 127, and then correcting for -ve numbers, so should be
-faster, at the expense of a larger data table.
-
-Change the maglut lookup table from 129*129 to 256*256
-Initialise the maglut buffer accordingly
-Change the data->maglut lookup to use the new maglut buffer
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: 43c6484
-Added some other peoples commit modificatons
-
-Added dtiller's --quiet and --ppm modifications
-Added terribl's squawk on interactive modifications
-
-Removed up some unused or un-needed variables
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: d3662bb
-Implemented Beast Binary output
-
-Malcolm Robb <Support at ATTAvionics.com>
-
-
-Commit: ff0fe38
-Two typos fixed in gmap.html.
-
-antirez <antirez at gmail.com>
-
-
-Commit: c991d65
-gmap.html: update plane flight field when new data is received.
-
-antirez <antirez at gmail.com>
-
-
-Commit: acc702d
-Fake version info removed from gmap.html.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 9d55d5e
-gmap.html: no rotation jumps when selecting / deselecting planes.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 3307261
-CPR decoding: southern hemisphere coords are now handled correctly.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 13596ba
-A few bugs fixed in debug.html.
-
-antirez <antirez at gmail.com>
-
-
-Commit: e9e07e0
-Improved Google map interace: select planes and see details.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 27e3743
-Remove stale aircrafts when --interactive is not enabled.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 977493c
-Strong preamble detection even with --aggressive.
-
-To try to decode messages with a fundamentally flawed preamble is mostly
-a useless waste of CPU time.
-
-The new aggressive mode still detects a sensible percentage of
-additional messages because of the error tolerance and two-bits fixes
-but does not waste your CPU time.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 184953f
-Phase correction fixed, code reshaped to apply more corrections.
-
-The phase correction was applied only to a subset of bits! Because of an
-offset error.
-
-The detection code layout was modified a bit to make it simpler to
-implement more corrections in the future. However only phase correction
-is performed currently. Slope correction, or to compensate for the cycloid
-effect are two possible improvements.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 11d8db0
-Properly initialize ICAO cached addresses hash table.
-
-antirez <antirez at gmail.com>
-
-
-Commit: c2e79d4
-Many small improvements (see full commit message).
-
-* Better preamble detection to skip most of the messages we'll likely
- not be able to decode.
-
-* A Phase correction algorithm that improves the recognition compared
- to the previous algorithm used.
-
-* Javascript output in debug mode, and a debug.html file that can be
- used in order to see graphically undecoded samples.
-
-* Ability to detect cross-read messages, that are, messages that happen
- to start and end across two different reads from the device or file.
-
-* A few bugx fixed.
-
-* README improved.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 9086290
-SBS-1: Code style adapted to code base.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 071a021
-New feature: Output in SBS format
-
-Kemal Hadimli <kemal at vnil.la>
-
-
-Commit: 2fe1882
-Do not modify the packet when AP gets decoded.
-
-antirez <antirez at gmail.com>
-
-
-Commit: c9bb486
-Squawk extraction fixed.
-
-antirez <antirez at gmail.com>
-
-
-Commit: b4805ea
-Two important fixes to CPR decoding: wrong cast and more precise timing.
-
-This commit address two issues with the implementation of CPR decoding:
-
-Fix #1: The two functions N() and DLon() used to have the latitude
-parameter as an integer (!), basically truncating the fractional part
-before calling the NL() function to perform the lookup.
-
-This resulted into random strange movements of aircrafts, especially
-jumps or shifted positions.
-
-Fix #2: Use milliseconds for CPR odd/even timestamps. Dump1090 already
-tried to use the most recent packet received among the odd and even
-packets currently available, however to do this correctly millisecond
-resolution should be used, otherwise many times the odd and even packet
-appear to have the same time in seconds and we don't always use the
-latest received.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 03759a3
-Google map view enhanced: color by altitude and more.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 21fc9de
-HTTP keep-alive fixed. Network debugging capabilities.
-
-antirez <antirez at gmail.com>
-
-
-Commit: e40e55b
-Less buggy network requests parser.
-
-antirez <antirez at gmail.com>
-
-
-Commit: dc91712
-Aggressive mode implemented.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 0bf65d8
-Better error handling for network clients.
-
-antirez <antirez at gmail.com>
-
-
-Commit: e1d3724
-Regression fixed: set client socket non-blocking.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 42eb990
-HTTP: Set clen correctly when serving gmap.html.
-
-antirez <antirez at gmail.com>
-
-
-Commit: a583615
-Initial HTTP support with planes animated using google map.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 4203b9c
-Minor README improvements.
-
-antirez <antirez at gmail.com>
-
-
-Commit: b10c8da
-CPR decoding fixed.
-
-antirez <antirez at gmail.com>
-
-
-Commit: f3a705f
-README -> README.md
-
-antirez <antirez at gmail.com>
-
-
-Commit: ddb1aa2
-README improved with more antennas info.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 0ce746d
-Ability to receive traffic from network.
-
-antirez <antirez at gmail.com>
-
-
-Commit: b5ff48e
-Network server sending raw data to clients.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 539039f
-Set heading to 0 when speed is 0.
-
-antirez <antirez at gmail.com>
-
-
-Commit: af4964d
-With --raw fflush() at every output to avoid delays.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 9c8ad1c
-More stuff on .gitignore.
-
-antirez <antirez at gmail.com>
-
-
-Commit: b6907f4
-CPR position decoding. Track calculation from velocity components.
-
-antirez <antirez at gmail.com>
-
-
-Commit: ec1f34f
-Fix for --metric
-
-antirez <antirez at gmail.com>
-
-
-Commit: 32fe8d8
-New --metric option to use meters and km/h in --interactive.
-
-antirez <antirez at gmail.com>
-
-
-Commit: f231c7a
-Remove idle aircrafts in interactive mode.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 3f47bb6
-Initialize aircraft speed in interactive mode.
-
-The effect of this bug was random speeds displayed with --interactive.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 1576b61
-Minor aesthetic change to interactive mode.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 840a005
-Interactive mode with --ifile: play at natural speed.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 69ae249
-New AP brute forcing algorithm.
-
-The old approach was to loop over a small circular buffer of recently
-seen addresses recomputing the CRC every time: this prevented the use of
-a big cache, and 20 entries was too small in case of high traffic and
-big range antennas.
-
- at prog on ##rtlsdr suggested to use an alternative algorithm where
-instead we compute the CRC of the message, and xor it to obtain the
-address, that is later checked in our list of recently seen addresses.
-This is a lot better and allows for bigger tables in O(1) lookup time.
-
-I used this idea to implement a larger 1024 elements table. Instead of
-writing a proper hash table I used the fact we are just dealing with a
-cache, so I just hash the ICAO addess and overwrite the old entry at
-that idex with the address-timestamp pair, not caring about collisions.
-
-The bigger table makes a huge difference:
-In a test vector of 113 seconds recording with 76 simultaneous aircrafts
-the new algorithm detected around 10k more messages (!).
-
-antirez <antirez at gmail.com>
-
-
-Commit: fed415b
-Show 16 bit magnitude value with --debug.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 0a7c5c2
-Threads locking model fixed (reliable --ifile).
-
-antirez <antirez at gmail.com>
-
-
-Commit: c653e0e
-Added a new --onlyaddr option to just output ICAO addresses.
-
-antirez <antirez at gmail.com>
-
-
-Commit: b3945d1
-Use 16 bit for the magnitude vector to improve sensitivity.
-
-As @keenerd noted on ##rtlsdr, using an 8 bit magnitude vector is not
-enough in order to distinguish every different I/Q pair.
-
-With this commit a few more messages with good CRC are detected.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 417cab5
-Improved message detection and --stats option.
-
-The demodulation algorithm now only skips the current message if the
-CRC is valid, this improves the amount of messages detected with good
-CRC by ~ 4% since sometimes we are just a few samples out of sync.
-
-This also improves the amount of messages that can be fixed.
-
-The --stats option was added in order to better evaluate how the
-algorithm performs on the same input after some change. So if you run
-the program with both --ifile and --stats no Mode S message is logged
-at all, but at the end of the processing the program shows you the
-amount of messages decoded with good, bad crc, bit corrections, valid
-preambles and so forth.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 3833673
-Git ignore the right executable name.
-
-antirez <antirez at gmail.com>
-
-
-Commit: f01324c
-Interactive mode: new switch --interactive-rows for max # of rows.
-
-antirez <antirez at gmail.com>
-
-
-Commit: d974a4d
-Everything renamed dump1090 (was mode1090).
-
-antirez <antirez at gmail.com>
-
-
-Commit: c059d01
-Makefile: use pkgconfig instead of hardcoded paths
-
-Steve Markgraf <steve at steve-m.de>
-
-
-Commit: f01670e
-Use 1.408 factor to create the magnitude look up talbe.
-
-Previously 1.4 was used that prevented to use the full 0-255 scale.
-Thanks to @keenerd for reporting this issue.
-
-antirez <antirez at gmail.com>
-
-
-Commit: d709a21
-TODO list updated.
-
-antirez <antirez at gmail.com>
-
-
-Commit: cae1d0c
-Fixed errors and typos in --help.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 1971ba9
---raw output format is now compatible with adsbhub.
-
-antirez <antirez at gmail.com>
-
-
-Commit: 7ca5a4b
-Initial commit of Dump1090, a simple Mode S decoder.
-
-antirez <antirez at gmail.com>
-
diff --git a/debian/README.Debian b/debian/README.Debian
deleted file mode 100644
index 3a0ffb4..0000000
--- a/debian/README.Debian
+++ /dev/null
@@ -1,19 +0,0 @@
-
-README for dump1090
-===================
-
- * ppup1090(1)
-
-It appears that ppup1090 depends on a binary object from COAA (the makers
-of the Planeplotter software) which does not have a license attached to it.
-This violates the Debian Free Software Guidelines (DFSG) and so it is not
-built or included with the package.
-
-If you wish to build ppup1090 for your system you can visit the author's
-GitHub page <https://github.com/MalcolmRobb/dump1090> which includes
-instructions for building that binary.
-
- * dump1090(1)
-
-The web interface includes remotely hosted JavaScript files that
-provide the interface to Google Maps.
diff --git a/debian/changelog b/debian/changelog
deleted file mode 100644
index 0dde8b6..0000000
--- a/debian/changelog
+++ /dev/null
@@ -1,51 +0,0 @@
-dump1090 (1.09.1007.14+dfsg-3) unstable; urgency=low
-
- * Replace shipped version of excanvas.js with libjs-excanvas
- * Modify the internal HTTP server to allow JavaScript libraries to be
- served from dump1090 (have anetWrite() in anet.c handle EAGAIN).
-
- -- Matthew Ernisse <mernisse at ub3rgeek.net> Tue, 21 Oct 2014 19:59:00 -0400
-
-dump1090 (1.09.1007.14+dfsg-2) unstable; urgency=low
-
- * Add buffering to the HTTP server so we can serve jQuery and associated
- files ourselves.
- * Have the HTTP server return code 404 instead of 200 if it has problems
- opening or reading files.
-
- -- Matthew Ernisse <mernisse at ub3rgeek.net> Sun, 19 Oct 2014 16:57:54 +0000
-
-dump1090 (1.09.1007.14+dfsg-1) unstable; urgency=low
-
- * Merge changes from upstream.
- * Depend on jQuery and jQuery UI to remove links from gmap.html to the
- Google CDN. Remove associated lintian overrides.
- * Repack upstream to remove closed-source blob.
- * Update packaging to reflect Debian Hamradio Maintainers standards.
- * Patch less of the stock Makefile by using dh_install helper.
- * Remove broken watch file.
-
- -- Matthew Ernisse <mernisse at ub3rgeek.net> Fri, 17 Oct 2014 17:52:56 +0000
-
-dump1090 (1.09.0608.14-3) unstable; urgency=low
-
- * Refuse to build ppup1090 as it depends on a closed-source blob.
- * Add patch headers to 00-makefile.patch
- * Pull upstream log into CHANGELOG.
- * Update copyright information.
-
- -- Matthew Ernisse <mernisse at ub3rgeek.net> Sun, 17 Aug 2014 20:57:34 +0000
-
-dump1090 (1.09.0608.14-2) unstable; urgency=low
-
- * Add man pages per Debian Policy.
- * Patch Makefile to only build the Planeplotter uploader on supported
- architectures.
-
- -- Matthew Ernisse <mernisse at ub3rgeek.net> Sun, 17 Aug 2014 17:13:57 +0000
-
-dump1090 (1.09.0608.14-1) unstable; urgency=low
-
- * Initial release (Closes: #712830).
-
- -- Matthew Ernisse <mernisse at ub3rgeek.net> Sat, 16 Aug 2014 20:26:47 +0000
diff --git a/debian/compat b/debian/compat
deleted file mode 100644
index ec63514..0000000
--- a/debian/compat
+++ /dev/null
@@ -1 +0,0 @@
-9
diff --git a/debian/control b/debian/control
deleted file mode 100644
index 9b0cb80..0000000
--- a/debian/control
+++ /dev/null
@@ -1,32 +0,0 @@
-Source: dump1090
-Section: net
-Priority: optional
-Maintainer: Debian Hamradio Maintainers <debian-hams at lists.debian.org>
-Uploaders: Matthew Ernisse <mernisse at ub3rgeek.net>
-Build-Depends: debhelper (>= 9), librtlsdr-dev, libusb-1.0-0-dev, pkg-config
-Standards-Version: 3.9.6
-Homepage: https://github.com/MalcolmRobb/dump1090
-Vcs-Git: http://anonscm.debian.org/git/pkg-hamradio/dump1090.git
-Vcs-Browser: http://anonscm.debian.org/cgit/pkg-hamradio/dump1090.git
-
-Package: dump1090
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, libjs-excanvas, libjs-jquery-ui, librtlsdr0
-Description: Mode S decoder specifically designed for RTLSDR devices
- The main features are:
- * Robust decoding of weak messages, with mode1090 many users observed
- improved range compared to other popular decoders.
- * Network support: TCP30003 stream (MSG5...), Raw packets, HTTP.
- * Embedded HTTP server that displays the currently detected aircrafts on
- Google Map.
- * Single bit errors correction using the 24 bit CRC.
- * Ability to decode DF11, DF17 messages.
- * Ability to decode DF formats like DF0, DF4, DF5, DF16, DF20 and DF21
- where the checksum is xored with the ICAO address by brute forcing the
- checksum field using recently seen ICAO addresses.
- * Decode raw IQ samples from file (using --ifile command line switch).
- * Interactive command-line-interfae mode where aircrafts currently detected
- are shown as a list refreshing as more data arrives.
- * CPR coordinates decoding and track calculation from velocity.
- * TCP server streaming and recceiving raw data to/from connected clients
- (using --net).
diff --git a/debian/copyright b/debian/copyright
deleted file mode 100644
index 0714f28..0000000
--- a/debian/copyright
+++ /dev/null
@@ -1,139 +0,0 @@
-Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: dump1090
-Source: git clone https://github.com/MalcolmRobb/dump1090
-
-Files: *
-Copyright: 2012 Salvatore Sanfilippo <antirez at gmail.com>
- 2014 Malcolm Robb <support at attavionics.com>
-License: BSD-3-clause
-
-Files: anet.*
-Copyright: 2006-2012 Salvatore Sanfilippo <antirez at gmail.com>
-License: BSD-3-clause
-
-Files: dump1090.*
-Copyright: 2012 Salvatore Sanfilippo <antirez at gmail.com>
-License: BSD-2-clause
-
-Files: interactive.*
-Copyright: 2012 Salvatore Sanfilippo <antirez at gmail.com>
-License: BSD-2-clause
-
-Files: mode_ac.*
-Copyright: 2012 Salvatore Sanfilippo <antirez at gmail.com>
-License: BSD-2-clause
-
-Files: net_io.*
-Copyright: 2012 Salvatore Sanfilippo <antirez at gmail.com>
-License: BSD-2-clause
-
-Files: ppup1090.*
-Copyright: 2013 Malcolm Robb <Support at ATTAvionics.com>
-License: BSD-2-clause
-
-Files: pthreads/*
-Copyright: 1998 John E. Bossom
- 1999, 2005 Pthreads-win32 contributors <rpj at callisto.canberra.edu.au>
-License: LGPL-2.0
-
-Files: rtl-sdr/rtl-sdr_export.c
-Copyright: 2012 Hoernchen <la at tfc-server.de>
-License: GPL-2.0
-
-Files: rtl-sdr/rtl-sdr.h
-Copyright: 2012 Steve Markgraf <steve at steve-m.de>
- 2012 Dimitri Stolnikov <horiz0n at gmx.net>
-License: GPL-2.0
-
-Files: view1090.*
-Copyright: 2014 Malcolm Robb <Support at ATTAvionics.com>
-License: BSD-2-clause
-
-Files: debian/*
-Copyright: 2014 Matthew Ernisse <mernisse at ub3rgeek.net>
-License: BSD-2-clause
-
-License: BSD-2-clause
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are
- met:
- .
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- .
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- .
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-License: BSD-3-clause
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- .
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- * Neither the name of Redis nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- .
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
-
-License: GPL-2.0
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
- .
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- .
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- .
- On Debian systems, the complete text of the GNU General
- Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
-
-License: LGPL-2.0
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later version.
- .
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
- .
- You should have received a copy of the GNU Lesser General Public
- License along with this library in the file COPYING.LIB;
- if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- .
- On Debian systems, the complete text of the GNU Lesser General
- Public License version 2 can be found in "/usr/share/common-licenses/LGPL-2".
diff --git a/debian/docs b/debian/docs
deleted file mode 100644
index 6f77277..0000000
--- a/debian/docs
+++ /dev/null
@@ -1,2 +0,0 @@
-README.md
-TODO
diff --git a/debian/dump1090.1 b/debian/dump1090.1
deleted file mode 100644
index ef55512..0000000
--- a/debian/dump1090.1
+++ /dev/null
@@ -1,288 +0,0 @@
-.\"Text automatically generated by txt2man
-.\" Copyright (c) 2014 Matthew John Ernisse <mernisse at ub3rgeek.net>
-.\" All Rights Reserved.
-.\"
-.\"Redistribution and use in source and binary forms,
-.\"with or without modification, are permitted provided
-.\"that the following conditions are met:
-.\"
-.\" * Redistributions of source code must retain the
-.\" above copyright notice, this list of conditions
-.\" and the following disclaimer.
-.\" * Redistributions in binary form must reproduce
-.\" the above copyright notice, this list of conditions
-.\" and the following disclaimer in the documentation
-.\" and/or other materials provided with the distribution.
-.\"
-.\"THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-.\""AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-.\"LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-.\"FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-.\"COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\"INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-.\"BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-.\"OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-.\"ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-.\"TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-.\"USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.TH "DUMP1090" "1" "17 August 2014" "" "User Commands"
-.SH NAME dump1090 \- Mode-S decoder
-.SH SYNOPSIS
-.nf
-.fam C
-\fBdump1090\fP
-\fBdump1090\fP \fB--interactive\fP
-\fBdump1090\fP \fB--ifile\fP \fIfile\fP
-
-.fam T
-.fi
-.fam T
-.fi
-.SH DESCRIPTION
-\fBdump1090\fP receives and decodes Mode S packets using the Realtek RTL2832
-software defined radio interface. It provides the ability to decode
-multiple frame types as well as correct bit errors using the embedded
-24-bit CRC. Results can be viewed using a text client, via the built-
-in HTTP server or forwarded off to other locations for collection.
-.PP
-
-.SH OPTIONS
-The supported options are as follows:
-.TP
-.B
-\fB--device-index\fP \fIindex\fP
-Select RTL device (default: 0)
-.TP
-.B
-\fB--gain\fP \fIdb\fP
-Set gain (default: max gain. Use \fB-10\fP for auto-gain)
-.TP
-.B
-\fB--enable-agc\fP
-Enable the Automatic Gain Control (default: off)
-.TP
-.B
-\fB--freq\fP \fIhz\fP
-Set frequency (default: 1090 Mhz)
-.TP
-.B
-\fB--ifile\fP \fIfilename\fP
-Read data from \fIfile\fP (use '-' for stdin)
-.TP
-.B
-\fB--interactive\fP
-Display received in a textual table, in real-time.
-.TP
-.B
-\fB--interactive-rows\fP \fInum\fP
-Max number of rows in interactive mode (default: 15)
-.TP
-.B
-\fB--interactive-ttl\fP \fIsec\fP
-Remove from list if idle for \fIsec\fP (default: 60)
-.TP
-.B
-\fB--interactive-rtl1090\fP
-Display flight table in RTL1090 format
-.TP
-.B
-\fB--raw\fP
-Show only messages hex values
-.PP
-\fB--net\fP Enable networking
-.TP
-.B
-\fB--modeac\fP
-Enable decoding of SSR Modes 3/A & 3/C
-.TP
-.B
-\fB--net-beast\fP
-TCP raw output in Beast binary format
-.TP
-.B
-\fB--net-only\fP
-Enable just networking, no RTL device or \fIfile\fP used
-.TP
-.B
-\fB--net-http-port\fP \fIport\fP
-HTTP server port (default: 8080)
-.TP
-.B
-\fB--net-ri-port\fP \fIport\fP
-TCP raw input listen port (default: 30001)
-.TP
-.B
-\fB--net-ro-port\fP \fIport\fP
-TCP raw output listen port (default: 30002)
-.PP
-\fB--net-sbs-port\fP \fIport\fP TCP BaseStation output listen port (default: 30003)
-.TP
-.B
-\fB--net-bi-port\fP \fIport\fP
-TCP Beast input listen port (default: 30004)
-.TP
-.B
-\fB--net-bo-port\fP \fIport\fP
-TCP Beast output listen port (default: 30005)
-.TP
-.B
-\fB--net-ro-size\fP \fIsize\fP
-TCP raw output minimum size (default: 0)
-.TP
-.B
-\fB--net-ro-rate\fP \fIrate\fP
-TCP raw output memory flush rate (default: 0)
-.TP
-.B
-\fB--net-heartbeat\fP \fIrate\fP
-TCP heartbeat rate in seconds (default: 60; 0 to disable)
-.TP
-.B
-\fB--net-buffer\fP \fIn\fP
-TCP buffer size 64Kb * (2^n) (default: n=0, 64Kb)
-.TP
-.B
-\fB--lat\fP \fIlatitude\fP
-Reference/receiver latitude for surface posn (opt)
-.TP
-.B
-\fB--lon\fP \fIlongitude\fP
-Reference/receiver longitude for surface posn (opt)
-.TP
-.B
-\fB--fix\fP
-Enable single-bits error correction using CRC
-.TP
-.B
-\fB--no-fix\fP
-Disable single-bits error correction using CRC
-.TP
-.B
-\fB--no-crc-check\fP
-Disable messages with broken CRC (discouraged)
-.TP
-.B
-\fB--phase-enhance\fP
-Enable phase enhancement
-.TP
-.B
-\fB--aggressive\fP
-More CPU for more messages (two bits fixes, \.\.\.)
-.TP
-.B
-\fB--mlat\fP
-display raw messages in Beast ascii mode
-.TP
-.B
-\fB--stats\fP
-With \fB--ifile\fP print stats at exit. No other output
-.TP
-.B
-\fB--onlyaddr\fP
-Show only ICAO addresses (testing purposes)
-.TP
-.B
-\fB--metric\fP
-Use metric units (meters, km/h, \.\.\.)
-.TP
-.B
-\fB--snip\fP \fIlevel\fP
-Strip IQ \fIfile\fP removing samples \fI level
-.TP
-.B
-\fB--debug\fP \fIflags\fP
-Debug mode (verbose)
-.TP
-.B
-\fB--quiet\fP
-Disable output to stdout.
-.TP
-.B
-\fB--ppm\fP \fIerror\fP
-Set receiver error in parts per million (default 0)
-.TP
-.B
-\fB--help\fP
-Show help
-.SH DIAGNOSTICS
-The Debug mode is a visual help to improve the detection algorithm or to
-understand why the program is not working for a given input.
-.PP
-In this mode messages are displayed in an ASCII-art style graphical
-representation, where the individual magnitude bars sampled at 2MHz are
-displayed.
-.PP
-An index shows the sample number, where 0 is the sample where the first Mode S
-peak was found. Some additional background noise is also added before the
-first peak to provide some context.
-.PP
-Select frames to log using the following flags:
-.TP
-.B
-d
-Log frames decoded with errors
-.TP
-.B
-D
-Log frames decoded with zero errors
-.TP
-.B
-c
-Log frames with bad CRC
-.TP
-.B
-C
-Log frames with good CRC
-.TP
-.B
-p
-Log frames with bad preamble
-.TP
-.B
-n
-Log network debugging info
-.TP
-.B
-j
-Log frames to frames.js, loadable by debug.html
-.SH EXAMPLES
-.TP
-The most basic usage is with no flags, which will open the first found rtl-sdr device and begin printing out hex dumps of the received packets.
-Most people will either run this in interactive mode or as a daemon.
-.PP
-Interactive mode
-.PP
-.nf
-.fam C
- dump1090 \-\-interactive
-
-.fam T
-.fi
-Daemon mode
-.PP
-.nf
-.fam C
- dump1090 \-\-net \-\-quiet &
-
-.fam T
-.fi
-You can also use \fBdump1090\fP as a network hub for multiple receivers by using
-.PP
-.nf
-.fam C
- dump1090 \-\-net\-only
-
-.fam T
-.fi
-.SH BUGS
-Report bugs with the program to the project's github page
-<https://github.com/MalcolmRobb/dump1090/>
-
-.SH AUTHORS
-Dump1090 was originally written by Salvatore Sanfilippo <antirez at gmail.com>.
-This version is now maintained by Malcolm Robb <support at attavionics.com>.
-This was packaged for Debian by Matthew Ernisse <mernisse at ub3rgeek.net>.
-.RE
-.PP
-
diff --git a/debian/dump1090.default b/debian/dump1090.default
deleted file mode 100644
index 34b25c5..0000000
--- a/debian/dump1090.default
+++ /dev/null
@@ -1,12 +0,0 @@
-# Change to "yes" to start the daemon
-RUN="no"
-
-# Set your lattitude and longitiude.
-LAT=""
-LON=""
-
-# Set to your PPM offset if you have calibrated your dongle
-PPM=""
-
-# Additional options that are passed to the daemon.
-DAEMON_ARGS="--net --fix --phase-enhance --enable-agc --net-ro-size 500 --net-ro-rate 5 --quiet"
diff --git a/debian/dump1090.dirs b/debian/dump1090.dirs
deleted file mode 100644
index ca882bb..0000000
--- a/debian/dump1090.dirs
+++ /dev/null
@@ -1,2 +0,0 @@
-usr/bin
-usr/sbin
diff --git a/debian/dump1090.examples b/debian/dump1090.examples
deleted file mode 100644
index 609db9f..0000000
--- a/debian/dump1090.examples
+++ /dev/null
@@ -1,2 +0,0 @@
-tools/*
-testfiles/*
diff --git a/debian/dump1090.install b/debian/dump1090.install
deleted file mode 100644
index 1605271..0000000
--- a/debian/dump1090.install
+++ /dev/null
@@ -1,11 +0,0 @@
-dump1090 /usr/sbin
-view1090 /usr/bin
-public_html/config.js /usr/share/dump1090/public_html
-public_html/extension.js /usr/share/dump1090/public_html
-public_html/gmap.html /usr/share/dump1090/public_html
-public_html/options.js /usr/share/dump1090/public_html
-public_html/planeObject.js /usr/share/dump1090/public_html
-public_html/script.js /usr/share/dump1090/public_html
-public_html/style.css /usr/share/dump1090/public_html
-public_html/coolclock/coolclock.js /usr/share/dump1090/public_html/coolclock
-public_html/coolclock/moreskins.js /usr/share/dump1090/public_html/coolclock
diff --git a/debian/dump1090.links b/debian/dump1090.links
deleted file mode 100644
index 2a44db9..0000000
--- a/debian/dump1090.links
+++ /dev/null
@@ -1,5 +0,0 @@
-/usr/share/javascript/jquery/jquery.js /usr/share/dump1090/public_html/jquery.js
-/usr/share/javascript/jquery-ui/jquery-ui.js /usr/share/dump1090/public_html/jquery-ui.js
-/usr/share/javascript/jquery-ui/css/smoothness/jquery-ui.min.css /usr/share/dump1090/public_html/jquery-ui.min.css
-/usr/share/javascript/jquery-ui/css/smoothness/images /usr/share/dump1090/public_html/images
-/usr/share/javascript/excanvas/excanvas.js /usr/share/dump1090/public_html/excanvas.js
diff --git a/debian/dump1090.manpages b/debian/dump1090.manpages
deleted file mode 100644
index 51b1f1f..0000000
--- a/debian/dump1090.manpages
+++ /dev/null
@@ -1 +0,0 @@
-debian/*.1
diff --git a/debian/init.d b/debian/init.d
deleted file mode 100644
index 49e53d4..0000000
--- a/debian/init.d
+++ /dev/null
@@ -1,164 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides: dump1090
-# Required-Start: $network $local_fs $remote_fs
-# Required-Stop: $local_fs $remote_fs
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: ADS-B decoder daemon for the Realtek SDR
-# Description: Decodes and displays or transmits to remote
-# servers ADS-B and Mode-S traffic using the
-# Realtek software defined radio USB dongle.
-### END INIT INFO
-
-# Author: Matthew Ernisse <mernisse at ub3rgeek.net>
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-RUN=no
-DESC=dump1090 # Introduce a short description here
-NAME=dump1090 # Introduce the short server's name here
-DAEMON=/usr/sbin/dump1090 # Introduce the server's location here
-DAEMON_ARGS="" # Arguments to run the daemon with
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x $DAEMON ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Exit if we aren't configured to run
-if [ "$RUN" = "no" ]; then
- exit 0
-fi
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
-. /lib/lsb/init-functions
-
-# Handle default options
-if [ -n "$LAT" ]; then
- DAEMON_ARGS="$DAEMON_ARGS --lat $LAT"
-fi
-
-if [ -n "$LON" ]; then
- DAEMON_ARGS="$DAEMON_ARGS --lon $LON"
-fi
-
-if [ -n "$PPM" ]; then
- DAEMON_ARGS="$DAEMON_ARGS --ppm $PPM"
-fi
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
- # Return
- # 0 if daemon has been started
- # 1 if daemon was already running
- # 2 if daemon could not be started
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
- || return 1
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON \
- --background -- $DAEMON_ARGS \
- || return 2
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
- # Return
- # 0 if daemon has been stopped
- # 1 if daemon was already stopped
- # 2 if daemon could not be stopped
- # other if a failure occurred
- start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
- RETVAL="$?"
- [ "$RETVAL" = 2 ] && return 2
- start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
- [ "$?" = 2 ] && return 2
- # Many daemons don't delete their pidfiles when they exit.
- rm -f $PIDFILE
- return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
- #
- # If the daemon can reload its configuration without
- # restarting (for example, when it is sent a SIGHUP),
- # then implement that here.
- #
- start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
- return 0
-}
-
-case "$1" in
- start)
- [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
- do_start
- case "$?" in
- 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
- 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
- esac
- ;;
- stop)
- [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
- 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
- esac
- ;;
- status)
- status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
- ;;
- #reload|force-reload)
- #
- # If do_reload() is not implemented then leave this commented out
- # and leave 'force-reload' as an alias for 'restart'.
- #
- #log_daemon_msg "Reloading $DESC" "$NAME"
- #do_reload
- #log_end_msg $?
- #;;
- restart|force-reload)
- #
- # If the "reload" option is implemented then remove the
- # 'force-reload' alias
- #
- log_daemon_msg "Restarting $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1)
- do_start
- case "$?" in
- 0) log_end_msg 0 ;;
- 1) log_end_msg 1 ;; # Old process is still running
- *) log_end_msg 1 ;; # Failed to start
- esac
- ;;
- *)
- # Failed to stop
- log_end_msg 1
- ;;
- esac
- ;;
- *)
- #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
- echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
- exit 3
- ;;
-esac
-
-:
diff --git a/debian/lintian-overrides b/debian/lintian-overrides
deleted file mode 100644
index e760dee..0000000
--- a/debian/lintian-overrides
+++ /dev/null
@@ -1,3 +0,0 @@
-# The web UI uses Google Maps, which cannot be served locally.
-dump1090 binary: usr/share/dump1090/public_html/gmap.html https://maps.googleapis.com/maps/api/js?sensor=false&libraries=geometry
-
diff --git a/debian/patches/00-makefile.patch b/debian/patches/00-makefile.patch
deleted file mode 100644
index 2d2d470..0000000
--- a/debian/patches/00-makefile.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-Author: Matthew John Ernisse <mernisse at ub3rgeek.net>
-Description: Update Makefile to work with the dh build system.
-Forwarded: not-needed
-
---- a/Makefile
-+++ b/Makefile
-@@ -4,17 +4,19 @@
- #
- PROGNAME=dump1090
-
--ifdef PREFIX
--BINDIR=$(PREFIX)/bin
--SHAREDIR=$(PREFIX)/share/$(PROGNAME)
--EXTRACFLAGS=-DHTMLPATH=\"$(SHAREDIR)\"
--endif
-+BINDIR=$(DESTDIR)/usr/bin
-+SBINDIR=$(DESTDIR)/usr/sbin
-+SHAREDIR=$(DESTDIR)/usr/share/$(PROGNAME)
-+EXTRACFLAGS=-DHTMLPATH=\"$(SHAREDIR)/public_html\"
-
--CFLAGS=-O2 -g -Wall -W `pkg-config --cflags librtlsdr`
--LIBS=`pkg-config --libs librtlsdr` -lpthread -lm
-+CFLAGS=-O2 -g -Wall -W $(shell pkg-config --cflags librtlsdr)
-+CFLAGS += $(shell dpkg-buildflags --get CFLAGS)
-+CFLAGS += $(shell dpkg-buildflags --get CPPFLAGS)
-+CFLAGS += $(shell dpkg-buildflags --get CXXFLAGS)
-+LIBS=$(shell pkg-config --libs librtlsdr) -lpthread -lm
-+LDFLAGS=$(shell dpkg-buildflags --get LDFLAGS)
- CC=gcc
-
--
- all: dump1090 view1090
-
- %.o: %.c
diff --git a/debian/patches/01-jquery.patch b/debian/patches/01-jquery.patch
deleted file mode 100644
index 4b56625..0000000
--- a/debian/patches/01-jquery.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-Author: Matthew John Ernisse <mernisse at ub3rgeek.net>
-Description: Locally serve jQuery and jQuery-UI files.
-Forwarded: not-needed
-
---- a/public_html/gmap.html
-+++ b/public_html/gmap.html
-@@ -1,9 +1,9 @@
- <html>
- <head>
- <link rel="stylesheet" type="text/css" href="style.css" />
-- <link rel="stylesheet" href="http://code.jquery.com/ui/1.10.3/themes/smoothness/jquery-ui.css" />
-- <script src="//ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
-- <script src="//ajax.googleapis.com/ajax/libs/jqueryui/1.10.3/jquery-ui.min.js"></script>
-+ <link rel="stylesheet" href="jquery-ui.min.css" />
-+ <script src="jquery.js"></script>
-+ <script src="jquery-ui.js"></script>
- <script type="text/javascript" src="https://maps.googleapis.com/maps/api/js?sensor=false&libraries=geometry"></script>
- <script type="text/javascript" src="config.js"></script>
- <script type="text/javascript" src="planeObject.js"></script>
diff --git a/debian/patches/02-http-buffer.patch b/debian/patches/02-http-buffer.patch
deleted file mode 100644
index 023938f..0000000
--- a/debian/patches/02-http-buffer.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-Author: Matthew John Ernisse <mernisse at ub3rgeek.net>
-Description: Add basic buffering to the HTTP server in net_io.c to allow us to
- serve larger than SO_SNDBUF files.
-Forwarded: no
-
---- a/net_io.c
-+++ b/net_io.c
-@@ -91,6 +91,7 @@
- services[j].port, services[j].descr, Modes.aneterr);
- exit(1);
- }
-+
- anetNonBlock(Modes.aneterr, s);
- *services[j].socket = s;
- } else {
-@@ -686,6 +687,8 @@
- //
- //=========================================================================
- //
-+#define HTTP_OK "200 OK";
-+#define HTTP_NOTFOUND "404 Not Found";
- #define MODES_CONTENT_TYPE_HTML "text/html;charset=utf-8"
- #define MODES_CONTENT_TYPE_CSS "text/css;charset=utf-8"
- #define MODES_CONTENT_TYPE_JSON "application/json;charset=utf-8"
-@@ -701,6 +704,7 @@
- int handleHTTPRequest(struct client *c, char *p) {
- char hdr[512];
- int clen, hdrlen;
-+ char *httpcode = HTTP_OK;
- int httpver, keepalive;
- char *url, *content;
- char ctype[48];
-@@ -752,13 +756,17 @@
- if (stat(getFile, &sbuf) != -1 && (fd = open(getFile, O_RDONLY)) != -1) {
- content = (char *) malloc(sbuf.st_size);
- if (read(fd, content, sbuf.st_size) == -1) {
-- snprintf(content, sbuf.st_size, "Error reading from file: %s", strerror(errno));
-+ snprintf(content, sbuf.st_size, "Error reading from %s: %s",
-+ getFile, strerror(errno));
-+ httpcode = HTTP_NOTFOUND;
- }
- clen = sbuf.st_size;
- } else {
- char buf[128];
-- clen = snprintf(buf,sizeof(buf),"Error opening HTML file: %s", strerror(errno));
-+ clen = snprintf(buf, sizeof(buf), "Error opening %s: %s",
-+ getFile, strerror(errno));
- content = strdup(buf);
-+ httpcode = HTTP_NOTFOUND;
- }
-
- if (fd != -1) {
-@@ -782,7 +790,7 @@
-
- // Create the header and send the reply
- hdrlen = snprintf(hdr, sizeof(hdr),
-- "HTTP/1.1 200 OK\r\n"
-+ "HTTP/1.1 %s\r\n"
- "Server: Dump1090\r\n"
- "Content-Type: %s\r\n"
- "Connection: %s\r\n"
-@@ -790,6 +798,7 @@
- "Cache-Control: no-cache, must-revalidate\r\n"
- "Expires: Sat, 26 Jul 1997 05:00:00 GMT\r\n"
- "\r\n",
-+ httpcode,
- ctype,
- keepalive ? "keep-alive" : "close",
- clen);
-@@ -800,15 +809,24 @@
-
- // Send header and content.
- #ifndef _WIN32
-- if ( (write(c->fd, hdr, hdrlen) != hdrlen)
-- || (write(c->fd, content, clen) != clen) ) {
-+ if (anetWrite(c->fd, hdr, hdrlen) != hdrlen) {
-+ perror("HTTP short write of reply header");
-+ free(content);
-+ return 1;
-+ }
-+
-+ if (anetWrite(c->fd, content, clen) != clen) {
-+ perror("HTTP short write of content");
-+ free(content);
-+ return 1;
-+ }
- #else
- if ( (send(c->fd, hdr, hdrlen, 0) != hdrlen)
- || (send(c->fd, content, clen, 0) != clen) ) {
--#endif
- free(content);
- return 1;
- }
-+#endif
- free(content);
- Modes.stat_http_requests++;
- return !keepalive;
---- a/anet.c
-+++ b/anet.c
-@@ -228,7 +228,10 @@
- while(totlen != count) {
- nwritten = write(fd,buf,count-totlen);
- if (nwritten == 0) return totlen;
-- if (nwritten == -1) return -1;
-+ if (nwritten == -1 && errno != EAGAIN) {
-+ return -1;
-+ continue;
-+ }
- totlen += nwritten;
- buf += nwritten;
- }
diff --git a/debian/patches/03-excanvas.patch b/debian/patches/03-excanvas.patch
deleted file mode 100644
index 5fa3d99..0000000
--- a/debian/patches/03-excanvas.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Author: Matthew John Ernisse <mernisse at ub3rgeek.net>
-Description: Replace local version of excanvas.js with libjs-excanvas.
-Forwarded: not-needed
---- a/public_html/gmap.html
-+++ b/public_html/gmap.html
-@@ -10,7 +10,7 @@
- <script type="text/javascript" src="options.js"></script>
- <script type="text/javascript" src="extension.js"></script>
- <script type="text/javascript" src="script.js"></script>
-- <script type="text/javascript" src="coolclock/excanvas.js"></script>
-+ <script type="text/javascript" src="excanvas.js"></script>
- <script type="text/javascript" src="coolclock/coolclock.js"></script>
- <script type="text/javascript" src="coolclock/moreskins.js"></script>
- </head>
diff --git a/debian/patches/series b/debian/patches/series
deleted file mode 100644
index 64202c1..0000000
--- a/debian/patches/series
+++ /dev/null
@@ -1,4 +0,0 @@
-00-makefile.patch
-01-jquery.patch
-02-http-buffer.patch
-03-excanvas.patch
diff --git a/debian/rules b/debian/rules
deleted file mode 100755
index 892b992..0000000
--- a/debian/rules
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/usr/bin/make -f
-# -*- makefile -*-
-
-export DEB_BUILD_MAINT_OPTIONS = hardening=+all
-DPKG_EXPORT_BUILDFLAGS = 1
-include /usr/share/dpkg/buildflags.mk
-
-override_dh_installchangelogs:
- dh_installchangelogs debian/CHANGES
-
-%:
- dh $@
diff --git a/debian/source/format b/debian/source/format
deleted file mode 100644
index 163aaf8..0000000
--- a/debian/source/format
+++ /dev/null
@@ -1 +0,0 @@
-3.0 (quilt)
diff --git a/debian/view1090.1 b/debian/view1090.1
deleted file mode 100644
index c945122..0000000
--- a/debian/view1090.1
+++ /dev/null
@@ -1,139 +0,0 @@
-.\"Text automatically generated by txt2man
-.\" Copyright (c) 2014 Matthew John Ernisse <mernisse at ub3rgeek.net>
-.\" All Rights Reserved.
-.\"
-.\"Redistribution and use in source and binary forms,
-.\"with or without modification, are permitted provided
-.\"that the following conditions are met:
-.\"
-.\" * Redistributions of source code must retain the
-.\" above copyright notice, this list of conditions
-.\" and the following disclaimer.
-.\" * Redistributions in binary form must reproduce
-.\" the above copyright notice, this list of conditions
-.\" and the following disclaimer in the documentation
-.\" and/or other materials provided with the distribution.
-.\"
-.\"THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-.\""AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-.\"LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-.\"FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-.\"COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\"INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-.\"BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-.\"OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-.\"ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-.\"TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-.\"USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.TH "VIEW1090" "1" "17 August 2014" "" "User Commands"
-.SH NAME view1090 \- Text client for dump1090
-.SH SYNOPSIS
-.nf
-.fam C
-\fBview1090\fP
-\fBview1090\fP \fB--net-bo-ipaddr\fP \fIipaddr\fP \fB--net-bo-port\fP \fIport\fP
-
-.fam T
-.fi
-.fam T
-.fi
-.SH DESCRIPTION
-\fBview1090\fP allows you to connect to a TCP Beast compliant stream and view
-the decoded messages in an ASCII-text table.
-.RE
-.PP
-
-.SH OPTIONS
-The supported options are as follows:
-.TP
-.B
-\fB--interactive\fP
-Display received in a textual table, in real-time.
-.TP
-.B
-\fB--interactive-rows\fP \fInum\fP
-Max number of rows in interactive mode (default: 15)
-.TP
-.B
-\fB--interactive-ttl\fP \fIsec\fP
-Remove from list if idle for \fIsec\fP (default: 60)
-.TP
-.B
-\fB--interactive-rtl1090\fP
-Display flight table in RTL1090 format
-.TP
-.B
-\fB--modeac\fP
-Enable decoding of SSR Modes 3/A & 3/C
-.TP
-.B
-\fB--net-bo-ipaddr\fP \fIIPv4\fP
-TCP Beast server address (default: 127.0.0.1)
-.TP
-.B
-\fB--net-bo-port\fP \fIport\fP
-TCP Beast server port (default: 30005)
-.TP
-.B
-\fB--lat\fP \fIlatitude\fP
-Reference/receiver latitude for surface posn (opt)
-.TP
-.B
-\fB--lon\fP \fIlongitude\fP
-Reference/receiver longitude for surface posn (opt)
-.TP
-.B
-\fB--fix\fP
-Enable single-bits error correction using CRC
-.TP
-.B
-\fB--no-fix\fP
-Disable single-bits error correction using CRC
-.TP
-.B
-\fB--no-crc-check\fP
-Disable messages with broken CRC (discouraged)
-.TP
-.B
-\fB--aggressive\fP
-More CPU for more messages (two bits fixes, \.\.\.)
-.TP
-.B
-\fB--metric\fP
-Use metric units (meters, km/h, \.\.\.)
-.TP
-.B
-\fB--help\fP
-Show help
-.SH EXAMPLES
-The most basic usage is with no flags, which will connect to the dump1090
-instance running on the local host.
-.PP
-.nf
-.fam C
- view1090
-
-.fam T
-.fi
-To connect to a remote instance you can specify the IPv4 address of that
-host.
-.PP
-.nf
-.fam C
- view1090 \-\-net\-bo\-ipaddr \fIipaddr\fP
-
-
-.fam T
-.fi
-.SH BUGS
-Report bugs with the program to the project's github page
-<https://github.com/MalcolmRobb/dump1090/>
-
-.SH AUTHORS
-Dump1090 was originally written by Salvatore Sanfilippo <antirez at gmail.com>.
-This version is now maintained by Malcolm Robb <support at attavionics.com>.
-This was packaged for Debian by Matthew Ernisse <mernisse at ub3rgeek.net>.
-.RE
-.PP
-
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-hamradio/dump1090.git
More information about the pkg-hamradio-commits
mailing list