[hamradio-commits] [dump1090] 88/389: Add version number to help output screen
Matthew Ernisse
mernisse-guest at moszumanska.debian.org
Wed Nov 5 00:19:43 UTC 2014
This is an automated email from the git hooks/post-receive script.
mernisse-guest pushed a commit to branch master
in repository dump1090.
commit 0263793928305a795fb365adec7bf7cf40d20f35
Author: Malcolm Robb <Support at ATTAvionics.com>
Date: Sun Apr 14 22:03:19 2013 +0100
Add version number to help output screen
---
dump1090.c | 72 ++++++++++++++++++++++++++++++++++++--------------------------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/dump1090.c b/dump1090.c
index d9139cf..1d672e7 100644
--- a/dump1090.c
+++ b/dump1090.c
@@ -49,6 +49,15 @@
#include "rtl-sdr.h"
#endif
+// File Version number
+// ====================
+// Format is : MajorVer.MinorVer.DayMonth.Year"
+// MajorVer chances only with significant changes
+// MinorVer changes when additional features are added, but not for bug fixes (range 00-99)
+// DayDate & Year changes for all changes, including for bug fixes. It represent the release date of the update
+//
+#define MODES_DUMP1090_VERSION "1.00.1404.13"
+
#define MODES_DEFAULT_RATE 2000000
#define MODES_DEFAULT_FREQ 1090000000
#define MODES_DEFAULT_WIDTH 1000
@@ -2591,35 +2600,38 @@ void modesReadFromClients(void) {
void showHelp(void) {
printf(
-"--device-index <index> Select RTL device (default: 0).\n"
-"--gain <db> Set gain (default: max gain. Use -100 for auto-gain).\n"
-"--enable-agc Enable the Automatic Gain Control (default: off).\n"
-"--freq <hz> Set frequency (default: 1090 Mhz).\n"
-"--ifile <filename> Read data from file (use '-' for stdin).\n"
-"--interactive Interactive mode refreshing data on screen.\n"
-"--interactive-rows <num> Max number of rows in interactive mode (default: 15).\n"
-"--interactive-ttl <sec> Remove from list if idle for <sec> (default: 60).\n"
-"--interactive-rtl1090 Display flight table in RTL1090 format.\n"
-"--raw Show only messages hex values.\n"
-"--net Enable networking.\n"
-"--net-beast TCP raw output in Beast binary format.\n"
-"--net-only Enable just networking, no RTL device or file used.\n"
-"--net-ro-port <port> TCP listening port for raw output (default: 30002).\n"
-"--net-ri-port <port> TCP listening port for raw input (default: 30001).\n"
-"--net-http-port <port> HTTP server port (default: 8080).\n"
-"--net-sbs-port <port> TCP listening port for BaseStation format output (default: 30003).\n"
-"--no-fix Disable single-bits error correction using CRC.\n"
-"--no-crc-check Disable messages with broken CRC (discouraged).\n"
-"--aggressive More CPU for more messages (two bits fixes, ...).\n"
-"--mlat display raw messages in Beast ascii mode.\n"
-"--stats With --ifile print stats at exit. No other output.\n"
-"--onlyaddr Show only ICAO addresses (testing purposes).\n"
-"--metric Use metric units (meters, km/h, ...).\n"
-"--snip <level> Strip IQ file removing samples < level.\n"
-"--debug <flags> Debug mode (verbose), see README for details.\n"
-"--quiet Disable output to stdout. Use for daemon applications.\n"
-"--ppm <error> Set the receiver error on parts per million (default 0).\n"
-"--help Show this help.\n"
+"-----------------------------------------------------------------------------\n"
+"| dump1090 ModeS Receiver Ver : " MODES_DUMP1090_VERSION " |\n"
+"-----------------------------------------------------------------------------\n"
+"--device-index <index> Select RTL device (default: 0)\n"
+"--gain <db> Set gain (default: max gain. Use -100 for auto-gain)\n"
+"--enable-agc Enable the Automatic Gain Control (default: off)\n"
+"--freq <hz> Set frequency (default: 1090 Mhz)\n"
+"--ifile <filename> Read data from file (use '-' for stdin)\n"
+"--interactive Interactive mode refreshing data on screen\n"
+"--interactive-rows <num> Max number of rows in interactive mode (default: 15)\n"
+"--interactive-ttl <sec> Remove from list if idle for <sec> (default: 60)\n"
+"--interactive-rtl1090 Display flight table in RTL1090 format\n"
+"--raw Show only messages hex values\n"
+"--net Enable networking\n"
+"--net-beast TCP raw output in Beast binary format\n"
+"--net-only Enable just networking, no RTL device or file used\n"
+"--net-ro-port <port> TCP raw output listen port (default: 30002)\n"
+"--net-ri-port <port> TCP raw input listen port (default: 30001)\n"
+"--net-http-port <port> HTTP server port (default: 8080)\n"
+"--net-sbs-port <port> TCP BaseStation output listen port (default: 30003)\n"
+"--no-fix Disable single-bits error correction using CRC\n"
+"--no-crc-check Disable messages with broken CRC (discouraged)\n"
+"--aggressive More CPU for more messages (two bits fixes, ...)\n"
+"--mlat display raw messages in Beast ascii mode\n"
+"--stats With --ifile print stats at exit. No other output\n"
+"--onlyaddr Show only ICAO addresses (testing purposes)\n"
+"--metric Use metric units (meters, km/h, ...)\n"
+"--snip <level> Strip IQ file removing samples < level\n"
+"--debug <flags> Debug mode (verbose), see README for details\n"
+"--quiet Disable output to stdout. Use for daemon applications\n"
+"--ppm <error> Set receiver error in parts per million (default 0)\n"
+"--help Show this help\n"
"\n"
"Debug mode flags: d = Log frames decoded with errors\n"
" D = Log frames decoded with zero errors\n"
@@ -2627,7 +2639,7 @@ void showHelp(void) {
" C = Log frames with good CRC\n"
" p = Log frames with bad preamble\n"
" n = Log network debugging info\n"
-" j = Log frames to frames.js, loadable by debug.html.\n"
+" j = Log frames to frames.js, loadable by debug.html\n"
);
}
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-hamradio/dump1090.git
More information about the pkg-hamradio-commits
mailing list