[hamradio-commits] [gnss-sdr] 80/80: Clean configuration files
Carles Fernandez
carles_fernandez-guest at moszumanska.debian.org
Sun May 15 20:11:59 UTC 2016
This is an automated email from the git hooks/post-receive script.
carles_fernandez-guest pushed a commit to branch upstream
in repository gnss-sdr.
commit a6df9f8c6f4c5665976cfa70e844ce1b56ac7323
Author: Carles Fernandez <carles.fernandez at gmail.com>
Date: Sun May 15 14:27:51 2016 +0200
Clean configuration files
Added information on how to retrieve SUPL parameters, and indicators to
userd on where to point to their own file or IP address. Removed unused
parameter wait_for_flowgraph.
---
conf/front-end-cal.conf | 14 ++++++++------
conf/gnss-sdr.conf | 7 -------
conf/gnss-sdr_GPS_L1_GN3S_realtime.conf | 2 --
conf/gnss-sdr_GPS_L1_SPIR.conf | 5 +----
conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf | 6 +++---
conf/gnss-sdr_GPS_L1_USRP_realtime.conf | 6 +++---
conf/gnss-sdr_GPS_L1_acq_QuickSync.conf | 5 +----
conf/gnss-sdr_GPS_L1_gr_complex.conf | 4 +---
conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf | 4 +---
conf/gnss-sdr_GPS_L1_ishort.conf | 2 +-
conf/gnss-sdr_GPS_L1_nsr.conf | 6 +++---
conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf | 6 +++---
conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf | 4 ++--
conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf | 4 ++--
conf/gnss-sdr_GPS_L1_two_bits_cpx.conf | 6 +++---
conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf | 4 ++--
conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf | 7 +++----
conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf | 4 +---
conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf | 5 -----
conf/gnss-sdr_Galileo_E1_ishort.conf | 3 ---
conf/gnss-sdr_Galileo_E1_nsr.conf | 4 +---
conf/gnss-sdr_Galileo_E5a.conf | 6 +++---
conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf | 7 +++----
conf/gnss-sdr_Hybrid_byte.conf | 5 +----
conf/gnss-sdr_Hybrid_byte_sim.conf | 5 +----
conf/gnss-sdr_Hybrid_gr_complex.conf | 5 +----
conf/gnss-sdr_Hybrid_ishort.conf | 6 ++----
conf/gnss-sdr_Hybrid_nsr.conf | 4 +---
..._multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf | 7 +++----
..._multichannel_GPS_L1_Flexiband_realtime_III_1a.conf | 4 ++--
..._multichannel_GPS_L1_Flexiband_realtime_III_1b.conf | 4 ++--
...r_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf | 4 ++--
...dr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf | 4 ++--
...ltichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf | 4 ++--
...S_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf} | 6 +++---
...nss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf | 6 +++---
...ultichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf | 6 +++---
...rt.conf => gnss-sdr_multisource_Hybrid_ishort.conf} | 18 ++----------------
conf/gnss-sdr_multisource_Hybrid_nsr.conf | 4 +---
39 files changed, 76 insertions(+), 137 deletions(-)
diff --git a/conf/front-end-cal.conf b/conf/front-end-cal.conf
index 91fd3d0..6f9d898 100644
--- a/conf/front-end-cal.conf
+++ b/conf/front-end-cal.conf
@@ -17,16 +17,18 @@ GNSS-SDR.init_longitude_deg=1.988782985790802
GNSS-SDR.init_altitude_m=10
; Mozoncillo
-
;GNSS-SDR.init_latitude_deg=41.14534824586196
;GNSS-SDR.init_longitude_deg=-4.187125019737464
;GNSS-SDR.init_altitude_m=900
+
;######### GLOBAL OPTIONS ##################
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2000000
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=true
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -45,11 +47,11 @@ SignalSource.implementation=Osmosdr_Signal_Source
SignalSource.AGC_enabled=false
;#filename: path to file with the captured GNSS signal samples to be processed
-;SignalSource.filename=/media/DATALOGGER_/signals/RTL-SDR/cap_-90dBm_IF15_RF40_EzCap.dat
-;SignalSource.filename=/media/DATALOGGER_/signals/Agilent GPS Generator/New York/2msps.dat
-;SignalSource.filename=/media/DATALOGGER_/signals/RTL-SDR/geo/pmt4_no_amp.dat
-SignalSource.filename=/media/DATALOGGER_/signals/RTL-SDR/geo/pmt4_no_amp_mini.dat
-;SignalSource.filename=/media/DATALOGGER_/signals/RTL-SDR/mozoncillo/cap_mozon_ezcap.dat
+;SignalSource.filename=/datalogger/signals/RTL-SDR/cap_-90dBm_IF15_RF40_EzCap.dat
+SignalSource.filename=/datalogger/signals/Agilent/New York/2msps.dat
+;SignalSource.filename=/datalogger/signals/RTL-SDR/geo/pmt4_no_amp.dat
+;SignalSource.filename=/datalogger/signals/RTL-SDR/geo/pmt4_no_amp_mini.dat
+;SignalSource.filename=/datalogger/signals/RTL-SDR/mozoncillo/cap_mozon_ezcap.dat
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr.conf b/conf/gnss-sdr.conf
index e29c5f7..88a66f3 100644
--- a/conf/gnss-sdr.conf
+++ b/conf/gnss-sdr.conf
@@ -9,8 +9,6 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
; Check http://www.mcc-mnc.com/
@@ -53,7 +51,6 @@ SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
@@ -72,13 +69,10 @@ SignalConditioner.implementation=Signal_Conditioner
;## Changes the type of input data.
;#implementation: [Pass_Through] disables this block
DataTypeAdapter.implementation=Ishort_To_Complex
-;DataTypeAdapter.implementation=Ibyte_To_Cbyte
;DataTypeAdapter.implementation=Pass_Through
-;DataTypeAdapter.item_type=byte
;######### INPUT_FILTER CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
-
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
@@ -166,7 +160,6 @@ Resampler.dump_filename=../data/resampler.dat
;#item_type: Type and resolution for each of the signal samples.
Resampler.item_type=gr_complex
-;Resampler.item_type=cbyte
;#sample_freq_in: the sample frequency of the input signal
Resampler.sample_freq_in=4000000
diff --git a/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf b/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf
index 27004e8..a1caf56 100644
--- a/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf
+++ b/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf
@@ -8,8 +8,6 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2727933.33 ; 8183800/3
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
diff --git a/conf/gnss-sdr_GPS_L1_SPIR.conf b/conf/gnss-sdr_GPS_L1_SPIR.conf
index 620307e..38a4ce8 100644
--- a/conf/gnss-sdr_GPS_L1_SPIR.conf
+++ b/conf/gnss-sdr_GPS_L1_SPIR.conf
@@ -9,16 +9,13 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=Spir_File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=/media/fabra/dd44068b-f808-4164-834c-35b550037514/CTTC/spir_file_20secs.dat
-;SignalSource.filename=/Users/carlesfernandez/Documents/workspace/code2/trunk/data/20Secs/20Secs_L1.dat
+SignalSource.filename=/dtalogger/signals/spir/data/20Secs/20Secs_L1.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=int
diff --git a/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf b/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf
index 9226491..04e1d27 100644
--- a/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf
+++ b/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf
@@ -10,10 +10,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -30,7 +30,7 @@ GNSS-SDR.SUPL_CI=0x31b0
SignalSource.implementation=UHD_Signal_Source
; # When left empty, the device discovery routines will search all vailable transports on the system (ethernet, usb...)
-SignalSource.device_address=192.168.40.2
+SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE
; # item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
;SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_GPS_L1_USRP_realtime.conf b/conf/gnss-sdr_GPS_L1_USRP_realtime.conf
index c449253..8fcb655 100644
--- a/conf/gnss-sdr_GPS_L1_USRP_realtime.conf
+++ b/conf/gnss-sdr_GPS_L1_USRP_realtime.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -29,7 +29,7 @@ GNSS-SDR.SUPL_CI=0x31b0
SignalSource.implementation=UHD_Signal_Source
;#When left empty, the device discovery routines will search all available transports on the system (ethernet, usb...)
-;SignalSource.device_address=192.168.40.2
+;SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf b/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf
index 891c4b0..cc3ba40 100644
--- a/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf
+++ b/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf
@@ -9,16 +9,13 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] or [Rtlsdr_Signal_Source]
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=../data/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat
-
+SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples.
;#Use gr_complex for 32 bits float I/Q or short for I/Q interleaved short integer.
diff --git a/conf/gnss-sdr_GPS_L1_gr_complex.conf b/conf/gnss-sdr_GPS_L1_gr_complex.conf
index 235a809..14b57ff 100644
--- a/conf/gnss-sdr_GPS_L1_gr_complex.conf
+++ b/conf/gnss-sdr_GPS_L1_gr_complex.conf
@@ -8,12 +8,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
-SignalSource.filename=/datalogger/signals/Agilent/New York/4msps.dat
+SignalSource.filename=/datalogger/signals/Agilent/New York/4msps.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=gr_complex
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
diff --git a/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf b/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf
index c171bd1..885bebd 100644
--- a/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf
+++ b/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf
@@ -8,12 +8,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
-SignalSource.filename=/datalogger/signals/Agilent/New York/4msps.dat
+SignalSource.filename=/datalogger/signals/Agilent/New York/4msps.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=gr_complex
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
diff --git a/conf/gnss-sdr_GPS_L1_ishort.conf b/conf/gnss-sdr_GPS_L1_ishort.conf
index 1a00911..05e9d83 100644
--- a/conf/gnss-sdr_GPS_L1_ishort.conf
+++ b/conf/gnss-sdr_GPS_L1_ishort.conf
@@ -13,7 +13,7 @@ ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
-SignalSource.filename=/Users/carlesfernandez/Documents/workspace/code2/trunk/data/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat
+SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=ishort
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
diff --git a/conf/gnss-sdr_GPS_L1_nsr.conf b/conf/gnss-sdr_GPS_L1_nsr.conf
index f40f212..f7d4358 100644
--- a/conf/gnss-sdr_GPS_L1_nsr.conf
+++ b/conf/gnss-sdr_GPS_L1_nsr.conf
@@ -11,10 +11,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2560000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -28,7 +28,7 @@ GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Nsr_File_Signal_Source
-SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream
+SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE
SignalSource.item_type=byte
SignalSource.sampling_frequency=20480000
SignalSource.freq=1575420000
diff --git a/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf b/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf
index 2d736c5..06cbb8e 100644
--- a/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf
+++ b/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf
@@ -11,10 +11,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2560000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -28,7 +28,7 @@ GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Two_Bit_Packed_File_Signal_Source
-SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream
+SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE
SignalSource.item_type=byte
; big_endian_items : not needed for byte inputs
; If the input were 'short' then this can either be big endian or little
diff --git a/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf b/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf
index e2f4d7e..946176c 100644
--- a/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf
+++ b/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf
@@ -11,10 +11,10 @@
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
GNSS-SDR.internal_fs_hz=1200000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf b/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf
index 5a4f702..51f7590 100644
--- a/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf
+++ b/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf
@@ -10,10 +10,10 @@
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
GNSS-SDR.internal_fs_hz=1999898
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf b/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf
index 16a9b79..0f25217 100644
--- a/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf
+++ b/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf
@@ -8,10 +8,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=3200000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -25,7 +25,7 @@ GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Two_Bit_Cpx_File_Signal_Source
-SignalSource.filename=/datalogger/captures/ajith/test1_two_cpx_live.dat
+SignalSource.filename=/datalogger/captures/ajith/test1_two_cpx_live.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=byte
SignalSource.sampling_frequency=19200000
SignalSource.freq=1575420000
diff --git a/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf b/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf
index d74aa3b..f38f8c7 100644
--- a/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf
+++ b/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf
@@ -8,10 +8,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf b/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf
index 8f75338..6a23d3d 100644
--- a/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf
+++ b/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf
@@ -10,10 +10,9 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
-
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -27,7 +26,7 @@ GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=UHD_Signal_Source
-SignalSource.device_address=192.168.50.2
+SignalSource.device_address=192.168.50.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE
SignalSource.item_type=cshort
SignalSource.sampling_frequency=4000000
SignalSource.freq=1227600000
diff --git a/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf b/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf
index a45557b..5fbe59f 100644
--- a/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf
+++ b/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf
@@ -10,13 +10,11 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=UHD_Signal_Source
SignalSource.item_type=gr_complex
-SignalSource.device_address=192.168.40.2
+SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
SignalSource.gain=50
diff --git a/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf b/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf
index 908b883..59059be 100644
--- a/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf
+++ b/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf
@@ -8,8 +8,6 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] or [Rtlsdr_Signal_Source]
@@ -18,11 +16,9 @@ SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
-
;#item_type: Type and resolution for each of the signal samples.
;#Use gr_complex for 32 bits float I/Q or ishort for I/Q interleaved short integer.
;#If ishort is selected you should have to instantiate the Ishort_To_Complex data_type_adapter.
-
SignalSource.item_type=ishort
;#sampling_frequency: Original Signal sampling frequency in [Hz]
@@ -41,7 +37,6 @@ SignalSource.repeat=false
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
diff --git a/conf/gnss-sdr_Galileo_E1_ishort.conf b/conf/gnss-sdr_Galileo_E1_ishort.conf
index 6c3bd72..011965f 100644
--- a/conf/gnss-sdr_Galileo_E1_ishort.conf
+++ b/conf/gnss-sdr_Galileo_E1_ishort.conf
@@ -8,8 +8,6 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
@@ -38,7 +36,6 @@ SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
diff --git a/conf/gnss-sdr_Galileo_E1_nsr.conf b/conf/gnss-sdr_Galileo_E1_nsr.conf
index d02cba2..a4b37d0 100644
--- a/conf/gnss-sdr_Galileo_E1_nsr.conf
+++ b/conf/gnss-sdr_Galileo_E1_nsr.conf
@@ -11,12 +11,10 @@ GNSS-SDR.internal_fs_hz=2560000
;GNSS-SDR.internal_fs_hz=4096000
;GNSS-SDR.internal_fs_hz=5120000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Nsr_File_Signal_Source
-SignalSource.filename=/Users/javier/signals/ifen/E1L1_FE0_Band0.stream
+SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE
SignalSource.item_type=byte
SignalSource.sampling_frequency=20480000
SignalSource.freq=1575420000
diff --git a/conf/gnss-sdr_Galileo_E5a.conf b/conf/gnss-sdr_Galileo_E5a.conf
index de3adb2..fd4cfe5 100644
--- a/conf/gnss-sdr_Galileo_E5a.conf
+++ b/conf/gnss-sdr_Galileo_E5a.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=32000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
;GNSS-SDR.SUPL_gps_enabled=false
;GNSS-SDR.SUPL_read_gps_assistance_xml=false
;GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -29,7 +29,7 @@ ControlThread.wait_for_flowgraph=false
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=../data/32MS_complex.dat;
+SignalSource.filename=/datalogger/signals/ifen/32MS_complex.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf b/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf
index a987174..f5c045c 100644
--- a/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf
+++ b/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf
@@ -9,10 +9,9 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=50000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
-
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
;GNSS-SDR.SUPL_gps_enabled=false
;GNSS-SDR.SUPL_read_gps_assistance_xml=false
;GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -26,7 +25,7 @@ ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
-SignalSource.filename=/media/javier/SISTEMA/signals/captura Generador IFEN CTTC Gal E5ab/Galileo_E5ab_IFEN_CTTC_run1.dat
+SignalSource.filename=/datalogger/signals/ifen/Galileo_E5ab_IFEN_CTTC_run1.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=gr_complex
SignalSource.sampling_frequency=50000000
SignalSource.freq=1176450000
diff --git a/conf/gnss-sdr_Hybrid_byte.conf b/conf/gnss-sdr_Hybrid_byte.conf
index 27e63d6..d4b2a6a 100644
--- a/conf/gnss-sdr_Hybrid_byte.conf
+++ b/conf/gnss-sdr_Hybrid_byte.conf
@@ -9,15 +9,13 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=20000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=/Users/javier/signals/fraunhofer/L125_III1b_210s_L1.bin
+SignalSource.filename=/datalogger/signals/Fraunhofer/L125_III1b_210s_L1.bin ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=byte
@@ -39,7 +37,6 @@ SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
diff --git a/conf/gnss-sdr_Hybrid_byte_sim.conf b/conf/gnss-sdr_Hybrid_byte_sim.conf
index 91a8ee5..df7ae45 100644
--- a/conf/gnss-sdr_Hybrid_byte_sim.conf
+++ b/conf/gnss-sdr_Hybrid_byte_sim.conf
@@ -9,15 +9,13 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=/home/javier/ClionProjects/gnss-sim/build/signal_out.bin
+SignalSource.filename=/datalogger/signals/gnss-sim/signal_out.bin ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=byte
@@ -39,7 +37,6 @@ SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
diff --git a/conf/gnss-sdr_Hybrid_gr_complex.conf b/conf/gnss-sdr_Hybrid_gr_complex.conf
index 9a73110..a0f10bd 100644
--- a/conf/gnss-sdr_Hybrid_gr_complex.conf
+++ b/conf/gnss-sdr_Hybrid_gr_complex.conf
@@ -9,14 +9,12 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4092000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] [Nsr_File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=/home/javier/signals/GPS_sim1.dat
+SignalSource.filename=/datalogger/signals/sim/GPS_sim1.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
@@ -38,7 +36,6 @@ SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
diff --git a/conf/gnss-sdr_Hybrid_ishort.conf b/conf/gnss-sdr_Hybrid_ishort.conf
index 8d36b66..e326d47 100644
--- a/conf/gnss-sdr_Hybrid_ishort.conf
+++ b/conf/gnss-sdr_Hybrid_ishort.conf
@@ -9,11 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
-
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -53,7 +52,6 @@ SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
-
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
diff --git a/conf/gnss-sdr_Hybrid_nsr.conf b/conf/gnss-sdr_Hybrid_nsr.conf
index ae2a7c5..a87f44c 100644
--- a/conf/gnss-sdr_Hybrid_nsr.conf
+++ b/conf/gnss-sdr_Hybrid_nsr.conf
@@ -12,14 +12,12 @@ GNSS-SDR.internal_fs_hz=2560000
;GNSS-SDR.internal_fs_hz=4096000
;GNSS-SDR.internal_fs_hz=5120000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] [Nsr_File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=Nsr_File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=/media/javier/SISTEMA/signals/ifen/E1L1_FE0_Band0.stream
+SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=byte
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf
index 28ca14c..7879cb0 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf
@@ -9,10 +9,9 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2500000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
-
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -29,7 +28,7 @@ GNSS-SDR.SUPL_CI=0x31b0
SignalSource.implementation=Flexiband_Signal_Source
SignalSource.flag_read_file=true
-SignalSource.signal_file=/media/javier/SISTEMA/signals/front-end fraunhoffer/L125_III1b_210s.usb
+SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf
index 145ede9..2808b25 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2500000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf
index 0fd1869..f7a56a6 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2500000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf
index 9d73cd4..9bd32b4 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2500000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf
index afb9c10..65cc261 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=5000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf
index d70ea65..f1ef948 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2500000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_realtime_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf
similarity index 98%
rename from conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_realtime_III_1b.conf
rename to conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf
index 17e046f..76ae483 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_realtime_III_1b.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=2500000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
@@ -29,7 +29,7 @@ GNSS-SDR.SUPL_CI=0x31b0
SignalSource.implementation=Flexiband_Signal_Source
SignalSource.flag_read_file=true
-SignalSource.signal_file=/media/javier/SISTEMA/signals/front-end fraunhoffer/L125_III1b_210s.usb
+SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf b/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf
index 239456a..b5e865e 100644
--- a/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_1C_enabled=false
GNSS-SDR.SUPL_read_1C_assistance_xml=true
GNSS-SDR.SUPL_1C_ephemeris_server=supl.google.com
@@ -29,7 +29,7 @@ GNSS-SDR.SUPL_CI=0x31b0
SignalSource.implementation=UHD_Signal_Source
;#When left empty, the device discovery routines will search all vailable transports on the system (ethernet, usb...)
-SignalSource.device_address=192.168.40.2
+SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf
index 95d612d..f0de982 100644
--- a/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf
+++ b/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf
@@ -9,10 +9,10 @@
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=5000000
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
+; Check http://www.mcc-mnc.com/
+; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
@@ -29,7 +29,7 @@ GNSS-SDR.SUPL_CI=0x31b0
SignalSource.implementation=Flexiband_Signal_Source
SignalSource.flag_read_file=true
-SignalSource.signal_file=/media/javier/SISTEMA/signals/front-end fraunhoffer/L125_III1b_210s.usb
+SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
diff --git a/conf/gnss-sdr_multisource_Hybrid_short.conf b/conf/gnss-sdr_multisource_Hybrid_ishort.conf
similarity index 97%
rename from conf/gnss-sdr_multisource_Hybrid_short.conf
rename to conf/gnss-sdr_multisource_Hybrid_ishort.conf
index d62f94e..00d8593 100644
--- a/conf/gnss-sdr_multisource_Hybrid_short.conf
+++ b/conf/gnss-sdr_multisource_Hybrid_ishort.conf
@@ -16,8 +16,6 @@ SignalSource.enable_throttle_control=false
;#repeat: Repeat the processing file. Disable this option in this version
SignalSource.repeat=false
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE 0 CONFIG ############
@@ -25,7 +23,7 @@ ControlThread.wait_for_flowgraph=false
SignalSource0.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource0.filename=../data/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat
+SignalSource0.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples.
SignalSource0.item_type=ishort
@@ -36,12 +34,6 @@ SignalSource0.sampling_frequency=4000000
;#freq: RF front-end center frequency in [Hz]
SignalSource0.freq=1575420000
-;#gain: Front-end Gain in [dB]
-SignalSource0.gain=60
-
-;#subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0)
-SignalSource0.subdevice=B:0
-
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
SignalSource0.samples=0
@@ -56,7 +48,7 @@ SignalSource0.dump_filename=../data/signal_source.dat
SignalSource1.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource1.filename=../data/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat
+SignalSource1.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples.
SignalSource1.item_type=ishort
@@ -67,12 +59,6 @@ SignalSource1.sampling_frequency=4000000
;#freq: RF front-end center frequency in [Hz]
SignalSource1.freq=1575420000
-;#gain: Front-end Gain in [dB]
-SignalSource1.gain=60
-
-;#subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0)
-SignalSource1.subdevice=B:0
-
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
SignalSource1.samples=0
diff --git a/conf/gnss-sdr_multisource_Hybrid_nsr.conf b/conf/gnss-sdr_multisource_Hybrid_nsr.conf
index a6f2f78..5ced6c5 100644
--- a/conf/gnss-sdr_multisource_Hybrid_nsr.conf
+++ b/conf/gnss-sdr_multisource_Hybrid_nsr.conf
@@ -21,15 +21,13 @@ SignalSource.enable_throttle_control=false
;#repeat: Repeat the processing file. Disable this option in this version
SignalSource.repeat=false
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE 0 CONFIG ############
;#implementation: Use [File_Signal_Source] [Nsr_File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource0.implementation=Nsr_File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource0.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream
+SignalSource0.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource0.item_type=byte
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-hamradio/gnss-sdr.git
More information about the pkg-hamradio-commits
mailing list