[Pkg-hpijs-devel] Bug#494659: Upstream version 2.8.6 must not be distributed (use 2.8.6b or 2.8.7 instead)
absurd
absurd at olurdix.de
Mon Aug 11 09:23:04 UTC 2008
Package: hplip
Version: 2.8.6-2
Severity: important
Hi,
I just noted on the hp page
http://hplip.sourceforge.net/release_notes.html
that release 2.8.6 was accidential, quote:
"HPLIP 2.8.6 prematurely released code that was not intended for
release. Release 2.8.6b replaces 2.8.6 and removes that code. There is
no change in intended functionality as described in the release notes.
We do not recommend using release 2.8.6 and ask that release 2.8.6 not
be redistributed."
There is no hint in the changelog that you actually use 2.8.6b, so I think
it is important (for lenny) to replace upstream by 2.8.6b or 2.8.7.
Thanks,
Stephan
-- Package-specific info:
warning: Invalid ppd_dir value: None
error: SIP not installed or version not found.
error: Status: (Not available. CUPS may not be installed or not running.)
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
HP Linux Imaging and Printing System (ver. 2.8.6)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux murray 2.6.25-2-amd64 #1 SMP Mon Jul 14 11:05:23 UTC 2008 x86_64 GNU/Linux
Distribution:
debian 0.0
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
Checking for CUPS...
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: cups - Common Unix Printing System...
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 2.8.6 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=2.8.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.6.20
-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------
No devices found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPwarning: No queues found.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
error: 6 errors and/or warnings.
S PRINTER QUEUES |
---------------------------------
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
Checking output of 'scanimage -L'...
device `v4l:/dev/video0' is a Noname BT878 video (AVerMedia AVerTV D virtual device
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-2-amd64 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages hplip depends on:
ii adduser 3.108 add and remove users and groups
ii coreutils 6.10-6 The GNU core utilities
ii cups 1.3.7-9 Common UNIX Printing System(tm) -
ii hplip-data 2.8.6-2 HP Linux Printing and Imaging - da
ii libc6 2.7-13 GNU C Library: Shared libraries
ii libcups2 1.3.7-9 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.2.1-2 simple interprocess messaging syst
ii libsnmp15 5.4.1~dfsg-8.1 SNMP (Simple Network Management Pr
ii libssl0.9.8 0.9.8g-12 SSL shared libraries
ii libusb-0.1-4 2:0.1.12-12 userspace USB programming library
ii lsb-base 3.2-12 Linux Standard Base 3.2 init scrip
ii python 2.5.2-1 An interactive high-level object-o
ii python-dbus 0.82.4-2 simple interprocess messaging syst
ii python-imaging 1.1.6-3 Python Imaging Library
ii python-support 0.8.4 automated rebuilding support for P
Versions of packages hplip recommends:
pn cups-client <none> (no description available)
ii hpijs 2.8.6+2.8.6-2 HP Linux Printing and Imaging - gs
ii hplip-gui 2.8.6-2 HP Linux Printing and Imaging - GU
Versions of packages hplip suggests:
ii gksu 2.0.0-5 graphical frontend to su
ii hplip-doc 2.8.6-2 HP Linux Printing and Imaging - do
pn kdeprint | gtklp | xpp <none> (no description available)
pn openprinting-ppds <none> (no description available)
-- no debconf information
More information about the Pkg-hpijs-devel
mailing list