[Pkg-hpijs-devel] Bug#490212: hplip: wrong placing of hp-systray icons on kde4
Eric Valette
eric.valette at free.fr
Thu Jul 10 19:05:00 UTC 2008
Package: hplip
Version: 2.8.6-1
Severity: minor
Fo some reasons, this systray applet is wrongly located when other are
still at they normal place (Krandrtray, kmix, korganizer, ...)
So I do not konw if the bug is in the hplip python code or kde code but
it is annoying.
-- Package-specific info:
warning: Invalid ppd_dir value: None
error: SIP not installed or version not found.
note: For troubleshooting printing issues, it is best to have the CUPS 'LogLevel'
note: set to 'debug'. To set the LogLevel to debug, edit the file /etc/cups/cupsd.conf (as root),
note: and change the line near the top of the file that begins with 'LogLevel' to read:
note: LogLevel debug
note: Save the file and then restart CUPS (see your OS/distro docs on how to restart CUPS).
note: Now, when you print, helpful debug information will be saved to the file:
note: /var/log/cups/error_log
note: You can monitor this file by running this command in a console/shell:
note: tail -f /var/log/cups/error_log
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
error: 'ppdev' kernel module not loaded.
HP Linux Imaging and Printing System (ver. 2.8.6)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or
.run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an
already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both
compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux tri-yann3 2.6.26-rc9 #1 SMP PREEMPT Sun Jul 6 10:30:02 CEST 2008 x86_64 GNU/Linux
Distribution:
debian unstable
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
Checking for CUPS...
Status: l?ordonnanceur tourne
Version: 1.3.7
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 2.8.6 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=2.8.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.6.20
-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------
No devices found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------------------------- -------------------------
hp:/usb/Phowarning: No queues found.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
error: 4 errors and/or warnings.
tosmart_8200_series?serial=MY5CA3X0 HP Photosmart 8200 series
2G04KJ
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0xc202 at 001:008:
Device URI: hp:/usb/Photosmart_8200_series?serial=MY5CA3X02G04KJ
Device node: /dev/bus/usb/001/008
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/008
# owner: lp
# group: scanner
user::rw-
group::rw-
other::r--
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-rc9 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=fr_FR at euro, LC_CTYPE=fr_FR at euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages hplip depends on:
ii adduser 3.108 add and remove users and groups
ii coreutils 6.10-6 The GNU core utilities
ii cups [cupsys] 1.3.7-8 Common UNIX Printing System(tm) -
ii cupsys 1.3.7-8 Common UNIX Printing System (trans
ii hplip-data 2.8.6-1 HP Linux Printing and Imaging - da
ii libc6 2.7-12 GNU C Library: Shared libraries
ii libcups2 1.3.7-8 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.2.1-2 simple interprocess messaging syst
ii libsnmp15 5.4.1~dfsg-8.1 SNMP (Simple Network Management Pr
ii libssl0.9.8 0.9.8g-10.1 SSL shared libraries
ii libusb-0.1-4 2:0.1.12-12 userspace USB programming library
ii lsb-base 3.2-13 Linux Standard Base 3.2 init scrip
ii python 2.5.2-1 An interactive high-level object-o
ii python-dbus 0.82.4-2 simple interprocess messaging syst
ii python-imaging 1.1.6-3 Python Imaging Library
ii python-support 0.8.4 automated rebuilding support for P
Versions of packages hplip recommends:
ii cups-client [cupsys-client 1.3.7-8 Common UNIX Printing System(tm) -
ii cupsys-client 1.3.7-8 Common UNIX Printing System (trans
ii hpijs 2.8.6+2.8.6-1 HP Linux Printing and Imaging - gs
ii hpijs-ppds 2.8.6+2.8.6-1 HP Linux Printing and Imaging - HP
ii hplip-gui 2.8.6-1 HP Linux Printing and Imaging - GU
ii openprinting-ppds 20080211-2 OpenPrinting printer support - Pos
-- no debconf information
More information about the Pkg-hpijs-devel
mailing list